Wood Tenders

Details: Description 18 Bags Cement 1.5 Cu.m. Sand 0.5 Cu.m. Fine Sand 1 Cu.m. Gravel 4 Pcs 12mm Rsb 6 Pcs 10mm Rsb 3 Kgs Tie Wire 1 Kgs Red Cement 106 Pcs 4" Chb 125 Bd.ft. 2" X 3" X 10' Coco Lumber 54 Bd.ft. 4" X 4" X 10' Coco Lumber 10 Sheets 1/4 Plywood 2 Kgs. #2 1/2 Cw Nails 2 Kgs. #1 Finishing Nails 2 Kgs. Umbrella Nails 13 Sheets Ga 22x8 Corrugated Sheet 20 Meter 2.0 Mm2 Thhn Stranded Wire 40 Meter 3.5 Mm2 Thhn Stranded Wire 2 Sets 4" Ceiling Receptable 2 Pcs 10w Led Bulb 2 Pcs 2-gang Outlet 1 Pc 2-gang Switch 3 Pcs Utility Box 2 Pcs Junction Box 10 Dia 1/2 Dia Conduit Pipe (poly) 2 Pcs Electrical Tape Big 2 Set 1.2m X 1m 2 - Panel Aluminum Jalousie Window 1 Set 1.2m X 0.5m 1 - Panel Aluminum Jalousie Window 1 Set 0.7 X 2.1m Wooden Flush Door 1 Pc Door Knob 4 Pcs Door Hinge

Details: Description Request For Quotation Rfq No. : Owd-rfq-2024-028 Rfq Date : December 20, 2024 Place Of Delivery : Obando Water District 004 P. Sevilla St., Catanghalan, Obando, Bulacan Date Of Delivery : Within Seven (7) Days Upon Receipt Of P.o. Approved Budget Of The Contract (abc) : Five Hundred Eighty-three Thousand Six Hundred Fifty-seven And 50/100 (php583,657.50) Pr No. : Owd-pr-2024-028 Bid Validity : Quotations Shall Be Valid Until March 31, 2025 Sir/madam, Please Quote Us Your Government Price/s For The Item/s Listed Below Not Later Than January 2, 2025, 4:00 Pm. Kindly Submit As Well Documentary Requirements, As Follows: 1. Mayor’s/business Permit 2. Philgeps Registration Number/certificate 3. Department Of Trade And Industries (dti) Certificate Of Business Registration/ Securities And Exchange (sec) Registration 4. Bir Certification Of Registration For Any Clarification, You May Contact Us At Telephone No. (02) 8367-7081 Or Email Address At Obandowd@yahoo.com. Very Truly Yours, Eric Joseph M. Avena Bac Secretariat Item No. Qty Unit Item Description Brand Unit Price (vat Inclusive) Total (vat Inclusive) 001 20 Pcs Coco Lumber 2x3x10 *for Scaffolding And As Form 002 2 Pcs Marine Plywood ¼” *5mm Thickness For Concrete Form 003 6 Kgs Cwn #4 *round Head And Diamond Point 004 6 Kgs Cwn #3 *round Head And Diamond Point 005 4 Kgs Cwn #2 *round Head And Diamond Point 006 2 Kgs Cwn #1 * Round Head And Diamond Point 007 6 Kgs Concrete Nail, #4 *for Concrete 008 3 Kgs Concrete Nail, #3 *for Concrete 009 2 Box Thhn Wire, #12 *stranded 010 7 Pcs 3-gang Switch (waterproof) *waterproof High Quality Switch Set 011 18 Pcs 2-gang Universal Outlet (waterproof) *waterproof & High Quality Outlet 012 14 Pcs Amco Box *matte Finish Abs Plastic 013 22 Pcs Junction Box With Cover (ceiling) *high Quality Polyvinyl Chloride (pvc) 014 10 Pcs Electrical Tape *resist High Voltages *tolerate Wide Temperature Variances 015 6 Pcs Led Ceiling Light 40 Watts *energy Saving & Long Lifetime 016 12 Pcs Electrical Pvc Pipe ½” *as Per Nec 352 017 12 Pcs Electrical Pvc Coupling ½” *as Per Nec 352 018 12 Pcs Electrical Pvc Elbow ½” *as Per Nec 352 019 12 Pcs Electrical Pvc End Bell ½” *as Per Nec 352 020 2 Pcs Circuit Breaker 30 Amp *rated Voltage:ac230/400v, 50/60hz *mechanical Life: 10000 Times 021 1 Pcs Circuit Breaker 20 Amp *rated Voltage:ac230/400v, 50/60hz *mechanical Life: 10000 Times 022 30 Pcs Hdpe Conduit ¾” (black) *flexible, Durable Material 023 5 Pcs Solar Street Light 120 Watts With Motion Detection *ip 65 Waterproof Rating *outdoor Led Light 024 80 Pcs Hollow Blocks #4 *for Exterior Wall *heavy Duty 025 6 Bags Cement *portland Cement, 40 Kg Bag 026 0.5 Cu.m Sand *fine 027 6 Pcs Deformed Steel Bars #10 *astm A615 *hot Rolled Deformed Bar Grade-40 028 1 Kgs Tie Wire *gauge #16 029 400 Pcs H0llow Blocks #5 *for Exterior Wall *heavy Duty 030 53 Bags Cement *portland Cement, 40 Kg Bag 031 5.5 Cu.m Sand *fine 032 2 Cu.m Gravel *crushed Stone *20mm In Size 033 30 Pcs Deformed Steel Bars #10 *astm A615 *hot Rolled Deformed Bar Grade-40 034 15 Pcs Deformed Steel Bars #12 * Astm A615 *hot Rolled Deformed Bar Grade-40 035 14 Pcs Deformed Steel Bars #16 *astm A615 *hot-rolled Deformed Bar Grade-40 036 2 Kgs Tie Wire *gauge #16 037 12 Pcs Machine/ Anchor Bolt 16 Mm *thread Pitch 2.0mm P. *high Tensile 038 10 Bags Cement *portland Cement, 40 Kg Bag 039 1 Cu.m Sand *fine 040 95 Bags Cement *portland Cement, 40 Kg Bag 041 6 Cu.m Sand *fine 042 11 Cu.m Gravel *crushed Stone *20mm In Size 043 80 Pcs Deformed Steel Bars #10 *astm A615 *hot-rolled Deformed Bar Grade-40 044 4 Kgs Tie Wire *gauge #16 045 52 Cu.m Backfill Materials *natural Soil *free From Rocks, Wood, Or Other Unsuitable Material 046 84 Pcs Angular Bar 2” X 2” (3.5mm) *6m Long Black Iron 047 15 Pcs Angular Bar 1 ½” X 1 ½” (3.5mm) *6m Long Black Iron 048 42 Pcs Tubular Steel 2x2 (1.5mm) *square, Galvanized Steel 049 3 Pcs Tubular Steel 2x3 (1.5mm) *square, Galvanized Steel 050 8 Pcs C-purlins 2x6 (1.5mm) *galvanized Steel 051 9 Pcs G.i. Pipe 4” Schedule 40 *zinc Coated, Plain End Steel Pipe 052 4 Pcs G.i. Pipe 3” Schedule 40 *zinc Coated, Plain End Steel Pipe 053 50 Pcs Cutting Disc *for Metal 054 2 Pcs Cut-off Cutting Disc 14” *for Metal 055 6 Boxes Welding Rod *welding Electrode 6013 056 24 Pcs Pre-painted Rib Type Roofing With Insulation *l-6.0m, T-0.5mm Cold-rolled Galvanized Iron Sheets 057 20 Pcs Pre-painted Plain Sheet 1.2m X 2.4m Cold-rolled Galvanized Iron Sheets 058 10 Pcs Side Flushing *pre-painted Gi Sheet 059 6 Pcs Ridgeroll *6m Pre-painted Gi Sheet 060 10 Pcs Stainless Gutter 16 X 8 Ft *box Type Stainless Mirror Or Brush Finish 061 3 Pcs Stainless Inside Gutter 24 X 8 Ft *box Type Stainless Mirror Or Brush Finish 062 4 Pcs Ficemboard 6.0mm *fiber Cement Board 6.0mm Thick 063 1000 Pcs Tex Screw *galvanized, Carbon Steel 064 6 Boxes Drill Bit 1/8” *high Speed Steel (hss) 065 2 Boxes Blind Rivets *aluminum 066 12 Pcs Pvc Pipe 4” (drainage) *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 067 11 Pcs Pvc Pipe 3” (drainage) *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 068 14 Pcs Pvc Pipe Tee Reducer 4”x3” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 069 1 Pc Pvc Pipe Tee 4” X 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 070 3 Pcs Pvc Pipe Coupler 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 071 28 Pcs Pvc Pipe Elbow 3” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 072 2 Pcs Pvc Pipe Elbow 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 073 2 Pcs Pvc Pipe End Cap 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 074 1 Gals Qde *can Be Thinned With A Solvent *gloss Finish 075 3 Gals Epoxy Primer Paint (gray) *dry Film Thickness 25um Per Coat *excellent Water Resistance 076 3 Gals Roof Paint (green) *acrylic Latex Paint *gloss Finish 077 30 Pcs Sand Paper (#150) *waterproof Abrasive Paper 078 6 Pcs Baby Roller (cotton) *cotton Fiber 079 4 Pcs Paint Brush (#2) *wooden Handle *white Or Black Bristles 080 4 Pcs Paint Brush (#1) *wooden Handle *white Or Black Bristles 081 1 Gal Lacquer Thinner *can Dissolve Most Resins And Stains 082 1 Tins Flat Latex *100% Acrylic Latex *for Interior And Exterior Use 083 2 Tins Semi-gloss Latex *100% Acrylic Latex *for Interior And Exterior Use 084 1 Ltr Acri Color *concentrated Acrylic-solvent Based Tinting Colorant 085 4 Bags Skimcoat *super Fine White *indoor And Outdoor Use *low Voc Levels *crack Resistant *excellent Surface Adhesion 086 10 Pcs Sand Paper (#150) *waterproof Abrasive Paper 087 2 Pcs Masking Tape *pressure-sensitive Tape *made Of A Thin And Easy-to-tear Paper *easily Released Pressure-sensitive Adhesive 088 2 Pcs Roller (#7) *7 Inches *cotton Fiber *plastic Pan 089 2 Pcs Baby Roller (cotton) *cotton Fiber 090 2 Pcs Paint Brush (#2) *wooden Handle *white Or Black Bristles 091 2 Pcs Paint Brush (#1) *wooden Handle *white Or Black Bristles 092 2 Gals Waterproofing Paint *excellent Adhesion On Concrete Substrates *cementitious Finish Total Amount Quotation Submitted By: Name Of Company/establishment : Address : Philgeps Registration No. (required) : Printed Name & Signature Of Authorized Representative : Designation/position : Contact No./s Date :

Details: Description Please Quote Your Price For The Item/s Listed Below With The Following Conditions: • Electronic Copy Of Quotations Will Only Be Accepted If Sent Through The Bac E-mail Address, Admbac@itdi.dost.gov.ph And From The Official Email Address Of The Bidder Addressed To Mr. Eric M. Charlon, Itdi-bac Chairperson, Sub-committee On Shopping & Small Value Procurement. • Sealed Quotations Must Be Submitted To The Bac Office Addressed To Mr. Eric M. Charlon, Itdi-bac Chairperson, Sub-committee On Shopping & Small Value Procurement Per Quotation Indicating The Solicitation No. In Front Of The Sealed Envelope. • This Will Be Awarded Per Lot To The Lowest Calculated Responsive Bidder. • Specify The Brand, Model And Specifications In Your Quotation With The Letterhead Of Your Company And Your Signature (quotations Without Specified Details Are Subject For Outright Disqualification). Deadline For Submission Of Bids: 1:00 P.m. – January 27, 2025 (monday) 1) 1 Set Rolling Workbench - 11-drawer Rolling Workbench - Assembled Dimensions: 77" W X 20" D X 37.5" H - Overall Dimensions With Push Bars: 77" W X 20" D X 37.5" H - Solid Polyurethane-coated Wood Top, 1.5" Thick - All-steel Construction - 2 Stainless Steel Locking Doors With Magnetic Latch - 11 Lined Locking Drawers: -- Inner Drawer Dimensions: --- 9 Small Drawers: 19.25" W X 18.5" D X 2.75" H --- 1 Medium Drawer: 19.25" W X 18.5" D X 4.75" H --- 1 Large Drawer: 19.25" W X 18.5" D X 10.75" H - Four 5" Heavy-duty Wheels - 2 Stainless-steel Push Bars - 4 Corner Bumpers For Protection - Weight Capacity: 30 Lb. (per Drawer) Delivery Period: 30 Calendar Days Warranty: Na Important Reminders: Price: Inclusive Of All Applicable Taxes Price Validity: Pls. Specify Payment Terms: 15-30 Days Credit Delivery Terms: Pls. Specify Warranty Terms: Pls. Specify (if Applicable) Chemicals And Reagents- Delivery Shall Be Accompanied With Certificate Of Analysis Equipment- Delivery Shall Be Accompanied With Installation/test And Warranty Certificates Computer And Computer Parts- Delivery Shall Be Accompanied With Test/warranty Certificates This Shall Be Part Of The Delivery If Found Acceptable. Items Are To Be Delivered At Property & Procurement Section, 2nd Floor, Metrology Bldg., Itdi, Dost Compound, Bicutan, Taguig City. Additional Requirements: Upon Submission Of Quotation (abc > P50,000.00) * Philgeps Registration Certificate/number * Mayor’s/business Permit * Income/business Tax Return Or Tax Clearance Certificate * Pcab License (for Infra Projects) * Tax Identification Number (tin) * Bank Details: Account Name, Account Number, Bank Name And Branch (preferably Landbank Of The Philippines) Note: For Bank Transfers, If The Creditor’s Account Is Maintained Outside The Agency’s Mds-gsb, Corresponding Bank Charges Shall Be Borne/paid By The Creditor/payee Concerned.

Details: Description Repair And Improvement Of Early Childhood And Development Center With 64.5 Sq.m. Floor Area 9 Pcs 2" X 3" X 10' Cocolumber Lumber 1 Sheet 1/4" X 4' X 8' Marine Plywood With Icc Mark 1 Kg Cwn 4" 1 Kg Cwn 3" 1 Kg Cwn 1 1/2" 1 Pc 4' X 8' Tarpulin For Project Signboard 1 Liter Qde Paint - White Color 2 Pcs Paint Brush 2" 2 Cu.m. Gravel Bedding 3/4" 16 Pcs. 16 Mm. Ø Rsb 15 Pcs. 12 Mm. Ø Rsb 120 Pcs. 10 Mm. Ø Rsb 20 Kls. Tie Wire No. 16 124 Bags Portland Cement (type 1) 7 Cu.m. 3/4" Gravel 11 Cu.m. Coarse Sand 56 Pcs 2" X 3" X 12' Coco Lumber 37 Pcs 2" X 2" X 12' Coco Lumber 6 Shts. 1/4" Ordinary Plywood (2 Use) 3 Kls. Common Wire Nails 1- 1/2" 26 Kls. Common Wire Nails 4" 11 Kls. Common Wire Nails 3" 199 Pcs 2''x2''x10' Ceiling Joist & Hangers Good Lumber 30 Pcs 1/4''x4''x8' Marine Plywood 3 Pcs 0.25m X 0.5m Ceiling Vent 3 Mtrs 1'' Screen Wire 2 Pcs 3/4''x4'x8' Plyboard Ordinary 5 Kgs Common Wire Nails, 2 1/2" 5 Kgs Common Wire Nails, 2" 3 Kgs Concrete Nails, 3" 3 Kgs Common Wire Nails, 1" 291 Pcs 4" Chb 1 Pcs Kitchen Sink W/ Complete Fittings And Accessories 5 Length 4"x3.0m Pvc Pipe 3 Pc 2"x4" Pvc Wye 50 Meters 1/2" Hdpe Pipe 1 Pcs. 1/2" Dia. Gate Valve 6 Pcs. 1/2"x90˚ Bend Elbow 5 Pcs. 1/2" Tee 5 Pcs. 1/2" Faucets, Hosebib, Brass 3 Rolls 3/4" Teflon Tape 16 Pcs 3" Dia Pvc Pipe S40 24 Pcs 3" Pvc Elbow 90 Deg 8 Pcs Stainless Gutter Strainer 3 Cans Solvent Cement 400cc 21 Pcs Pre-painted Ga. 26 X 10' Corr. G.i. Sheet (.50mm) 2 Pcs Ga. 26 X 8' Flashing,big (.50mm) 14 Pcs. Gi Spanish Gutter Pre-painted 30 Pcs. 1/2"x 12"x 8' Hardisanepa 6 Pcs C - Purlins 2" X 4" X 20' 6 Pcs. 1/4"x2"x 2"x6m Angle Bar 10 Pcs 1/4"x1 1/2"x1 1/2" Angle Bar 1000 Pcs Texcrew 3" 1 Ltrs. Vulcaseal 4 Packs Welding Rod 60 Pcs 60cm X 60cm Granite Tiles 50 Pcs 20cm X 20cm Glazed Tiles 5 Kls. Tile Groute 3 Pcs. Tile Trim 1 Sets (0.90mx2.10m) Flush Door 4 Sets 3-1/2''x3-1/2'' Loose Pin Hinges 4 Pcs. 1/2''x3"-1/2'' Double Action Spring Hinge 1 Sets 1.20mx1.20m Jalousie Window On Standard Aluminum Housing W/ 6mm Thk Clear Glass On 50x150mm Hard Wood Jamb 1 Sets W-3, 0.60mx.650m Jalou Plus Window On Standard Aluminum Housing On 150mm Hard Wood Jamb 50 Mtrs #12 3.5mm Thhn Stranded Wire 50 Mtrs #14 Thhn Stranded Wire 100 Mtrs Moldflex 1/2" 4 Pcs. Big Electrical Tape 2 Pcs 18 Watts Led Bulb 2 Pcs 1 Gang Switch With Cover 2 Pcs 2 Gang Duplex Convenience Outlet With Cover 2 Pcs 4" Porcelain Lighting Outlet 4 Pcs 2" X 4" Pvc Utility Box 9 Gals Latex Paint, White Flat 2 Gals Enamel Paint, White Flat 2 Gals Roof Paint, Gloss Baguio Green 2 Gals Semi-gloss Latex, Ready Mixed ( Blue ) 1 Gals Semi-gloss Latex, Ready Mixed (orange) 3 Gals Semi-glosss Latex, Ready Mixed (green) 1 Gals Semi-gloss Latex, Ready Mixed ( Pink) 2 Gals Apricot White 1 Ltr. Burger Brown 4 Gals Enamel Paint, White Semi-gloss 1 Gals Enamel Paint, Semi-gloss ( Green ) 1 Gals Paint Thinner 20 Shts Sand Paper # 120 2 Pcs Paint Roller, 7'' With Pan 2 Pcs Baby Roller 2 Pcs Paint Brush, 4'' 2 Pcs Paint Brush, 2'' 2 Pcs Paint Brush, 1'' 2 Gals Red Oxide 1 Ltrs Concrete Neutralizer 8 Pcs Construction Hard Hat 8 Pairs Rubber Boots 8 Pairs Heavy Duty Hand Gloves 3 Box Face Mask 1 Units 2'x4' Tarpaulin For Warning Signs 1 Pcs 30cm X 30cm Project Marker ( Made Of Marble )

Details: Description 1. Desktop 3d Printer Molding Technology: Fdm Build Volume: At Least 220mm X 220mm X 240mm Max Printing Speed: 500 Mm/s Extruder Type: Dual – Gear Direct Drive Extruder Supported Filament: At Least Pla, Petg, Abs, Tpu (95a), Asa Nozzle Diameter: 0.4mm Filament Diameter Compatibility: 1.75mm Build Plate: Pei Flexible Build Plate Supplier Must Be At Least 4 Years In The Printing Industry 3 Units 2. Desktop 3d Printer Ding Technology: Fdm Build Volume: At Least 220mm X 220mm X 250mm Max Printing Speed: 600 Mm/s Extruder Type: Dual – Gear Direct Drive Extruder Automatic Calibration Supported Filament: At Least Pla, Tpu, Petg, Abs, Pla – Cf, Petg – Cf, Cr – Carbon Nozzle Diameter: 0.4mm Filament Diameter Compatibility: 1.75mm Build Plate: Pei Flexible Build Plate Supplier Must Be At Least 4 Years In The Printing Industry 1 Unit 1. Development Kit W/ Jetson Xavier Nx 8gb Module 21 Tera Operations Per Second (tops) 384 – Core Nvidia Volta™ (gpu) 6 – Core Nvidia Carmel Arm®v8.2 64 – Bit Cpu 6mb L2 + 4 Mb L3 8gb 128-bit Lpddr4x @59.7gb/s (memory) 16gb Emmc (storage) Pcb Size 130mmx120mm Display 1*hdmi Type A; 1*dp Ethernet 1* Gigabit Ethernet (10/100/1000dm) Usb 4* Usb 3.1 Type A Connector: 1*usb Type – C (device Mode) M.2 Key M 1x M.2 Key M M.2 Key E 1x M.2 Key E Camera 2* Csi (2 – Lane 15 Pin) Rtc 2 – Pin, Rtc Socket Fan 1x 4 – Pin Fan (5v Pwm) 1* 40 – Pin Expansion Header, 1* 12 – Pin Control And Uart Header Power Supply Dc 12v/5a (barrel Jack 5.5/2.5mm) 1 Set 1. Primer For Air Crush Painting Of 3d Models Prethinned Paints For Scale Module Use 250ml, Ready For Airbrush Use, Just Load On Your Airbrush And Spray Used For Priming Plastic Surface And Error Correction Before Paint Hobby Grade, Safe For Use On Plastic Scale Models 1x 250ml White Primer 4x 250ml Gray Primer 1x 250ml Black Primer 1 Box 2. Sd Primer For Air Brush Painting Of 3d Models Prethinned Paints For Scale Model Use 250ml, Ready For Airbrush Use, Just Load On You Airbrush And Spray Used For Priming Plastic Surface And Error Correction Before Paint Used For Eliminating Print Lines On 3d Prints By Filling Crevices Apply In Several Thin Layers With Light Sanding Until Print Lines Disappear Hobby Grade, Safe For Use On Plastic Scale Models 2 Pieces 3. Airbrush Hobby Paint Prethinned Paints For Scale Module Use 50ml, Ready For Airbrush Use, Just Load On Your Airbrush And Spray Hobby Grade, Safe For Use On Plastic Scale Models 1x 50ml Brick Pink, Ph269 1x 50ml Orange Yellow, Ph277 1x 50ml Pure Orange, Ph357 1x 50ml Ultramarine Blue, Ph234 2x 50ml Red Oxide, Ph259 4x 50ml Light Ghost Gray, Ph266 4x 50ml Lowvis Gray Ph261 4x 50ml Titanium White Ph353 2x 50ml Pure Green Ph360 1 Box 4. Top Coat For Air Brush Painting Of 3d Models Prethinned Paints For Scale Model Use 250ml, Ready For Airbrush Use, Just Load On Your Airbrush And Spray Used For Sealing Paint Hobby Grade, Safe For Use On Plastic Scale Models 2x250ml Flat Topcoat 2x 250ml Satin Topcoat 2x 250ml Gloss Topcoat 1 Box 5. Fast Dry Thinner, 250ml Fast Drying Hobby Grade, Safe For Use On Plastic Scale Models Use For Thinning Lacquer Type Hobby Paint Absolutely Plastic Safe Compatible With Arkom, Gaianotes, Ak Interactive Rela Colors 2 Pieces 6. Clinner, Water – Based Acrylics, 250ml Recommended Thinner For Arkom Waterbased Acrylics For Airbrushing 2 – In – 1 Product Formulation, Works As Thinner And Airbrush Cleaner 2 Pieces 7. Primer Spray Can 100% Purse Acrylic, Premium Quality Fast Drying, Highly Durable Interior And Exterior Quality Ideal For Wood, Material, Most Plastic Non – Fading, Non – Yellowing, Weather Resistant, No Lead And Mercury 2x 400 Cc White Primer 2x 400 Cc Gray Primer 1 Box 8. Clear Coat Spray Can 100% Pure Acrylic, Premium Quality Fast Drying, Highly Durable, Wather – Resistant Interior And Exterior Quality For Wood, Material, Most Plastic Non – Fading, Non – Yellowing, Weather Resistant, No Lead And Mercury 2x 400 Cc Matte Coat 2x 400 Cc Gloss Coat 1 Box

Description: Contract notice – general guideline, standard regulation, open procedure (construction work) Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center in Nidderau-Heldenbergen Carpentry work – interior fittings, furnishings, manufacture and assembly of kitchen furniture, ... More Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center in Nidderau-Heldenbergen Carpentry work – interior fittings, furnishings, manufacture and assembly of kitchen furniture, wardrobes, wall units, changing tables and paneling Scope of services: The services are to be offered as complete services, manufacture, delivery and assembly/installation, including professional disposal of the resulting building protection. Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center with 13 residential units The existing daycare center in the Heldenbergen district is becoming too small. Due to the planned expansion of the city of Nidderau, the range of daycare centers needs to be expanded. This need is met by the planned new building for the Kita Allee Mitte II. The new building is planned as a wedge-shaped, two-storey standard building, with the daycare center on the ground floor and 13 apartments on the upper floor. The total length of the complex is approximately 60.00 x 25.00 m on average. The gross floor area ground floor + upper floor is approximately 2,586 m². The new building will be constructed as a two-storey solid structure without a basement. The roof will be partly a solid flat roof with bituminous waterproofing, and partly a wooden roof truss with nail plate trusses, which will make the group rooms of the daycare center and the apartments above it stand out as individual houses. The facades will be partly ventilated, curtain facades with wooden cladding, and partly a thermal insulation composite system, in compliance with current local requirements. The windows and external doors are designed as triple glazing. The summer heat protection of the window surfaces is provided by external venetian blinds and roller shutters. The trade work "carpentry - interior design, furnishing" includes the following services: Construction site setup / construction process in accordance with Be - construction site setup work Setting up the trade's own construction site equipment - carpentry work Manufacturing and assembly of kitchen furniture, wardrobes, wall units, changing tables and cladding Scope of services: The services are to be offered as complete services, manufacture, delivery and assembly / installation, including professional disposal of the resulting building protection. The work begins on February 17, 2025 and is to be completed by April 18, 2025. The start and end of the work are specified in the order letter. The individual deadlines stated in the order letter are binding deadlines. Preparatory work: Drawing up the work plan: 10 days, Mon. February 17, 2025 - Fri. February 28, 2025 Preparatory work: Review of the work plan: 5 days, Mon. 03.03.2025 - Fri. 07.03.2025 Production and delivery: 20 days, Mon. 10.03.2025 - Fri. 04.04.2025 Assembly and installation: 10 days, Mon. 07.04.2025 - Fri. 18.04.2025

Description: Contract notice – general guideline, standard regulation, open procedure (construction work) Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center in Nidderau-Heldenbergen Carpentry work – interior fittings, furnishings, manufacture and assembly of kitchen furniture, ... More Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center in Nidderau-Heldenbergen Carpentry work – interior fittings, furnishings, manufacture and assembly of kitchen furniture, wardrobes, wall units, changing tables and paneling Scope of services: The services are to be offered as complete services, manufacture, delivery and assembly/installation, including professional disposal of the resulting building protection. Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center with 13 residential units The existing daycare center in the Heldenbergen district is becoming too small. Due to the planned expansion of the city of Nidderau, the range of daycare centers needs to be expanded. This need is met by the planned new building for the Kita Allee Mitte II. The new building is planned as a wedge-shaped, two-storey standard building, with the daycare center on the ground floor and 13 apartments on the upper floor. The total length of the complex is approximately 60.00 x 25.00 m on average. The gross floor area ground floor + upper floor is approximately 2,586 m². The new building will be constructed as a two-storey solid structure without a basement. The roof will be partly a solid flat roof with bituminous waterproofing, and partly a wooden roof truss with nail plate trusses, which will make the group rooms of the daycare center and the apartments above it stand out as individual houses. The facades will be partly ventilated, curtain facades with wooden cladding, and partly a thermal insulation composite system, in compliance with current local requirements. The windows and external doors are designed as triple glazing. The summer heat protection of the window surfaces is provided by external venetian blinds and roller shutters. The trade work "carpentry - interior design, furnishing" includes the following services: Construction site setup / construction process in accordance with Be - construction site setup work Setting up the trade's own construction site equipment - carpentry work Manufacturing and assembly of kitchen furniture, wardrobes, wall units, changing tables and cladding Scope of services: The services are to be offered as complete services, manufacture, delivery and assembly / installation, including professional disposal of the resulting building protection. The work begins on February 17, 2025 and is to be completed by April 18, 2025. The start and end of the work are specified in the order letter. The individual deadlines stated in the order letter are binding deadlines. Preparatory work: Drawing up the work plan: 10 days, Mon. February 17, 2025 - Fri. February 28, 2025 Preparatory work: Review of the work plan: 5 days, Mon. 03.03.2025 - Fri. 07.03.2025 Production and delivery: 20 days, Mon. 10.03.2025 - Fri. 04.04.2025 Assembly and installation: 10 days, Mon. 07.04.2025 - Fri. 18.04.2025

Description: * Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Please Supply And Deliver Electric Plastic Shredder Grinder 2.2kw Specifications: ?versatile Material Shredder?this Plastic Crusher Is An Efficient Tool For Crushing And Recycling A Wide Range Of Materials Including Pc,pvc ,abs,pet,eps,pu,hdpe,wood,nylon,wire,corn,walnuts,paper Boxes,mineral Water Bottles,and Other Soft And Hard Plastics. - It E Ffectively Reduces Thick Materials Into Uniform Granules For Easy Reuse,enabling The Recovery Of Significant Amounts Of Scrap Material. ? ?high Efficiency <(>&<)> High Capacity?equipped With A 2.2kw Pure Copper Motor, It Boasts A Capacity Of 50-100kg/h. The Machine Features A Feed Port Dimension Of 110x180mm And A Mesh Size Of 6mm,which Facilitates Quick And Efficient Processing. - The Use Of High-quality Steel Knives With Extra Sharp Blades Ensures Materials Are Crushed With Ease And Speed. ? ?high-quality Construction?high-intensity Steel Screws Secure The Knife Leaves And Seats, Providing Strong Bearing Capacity. As A Heavy-duty Crusher Machine, It Remains Stable Even When Processing Hard Materials, Thanks To Its All-copper Motor That Enables Prolonged Continuous Operation. ? ?low Noise Design?the Crushing Chamber Is Sound-proof Treated On All Walls,significantly Reducing Noise Levels During Operation. - This Is Achieved Through The Use Of A Deafener, Double-layer Steel Plates, And Thickened Double-layer Boards, Ensuring A Quieter Working Environment. ? ?user-friendly <(>&<)> Easy Maintenance?the Drawer Is Enlarged And Extended To Offering More Storage And Convenience In Material Retrieval. The Pulley Design Allows For 360-degree Arbitrary Rotation. - The Feed Hopper, Crushing Knife, And Filter Are Easily Disassembled For Thorough Cleaning, While A Thickened Baffle Plate Prevents Material Fly-off During Operation. This Plastic Crusher Is An Efficient Machine Designed For Crushing And Recycling A Wide Range Of Materials Including Pc, Pvc, Abs, Pet, Eps, Pu, Hdpe, Nylon, Wire, Corn, Walnuts, Paper Boxes, Mineral Water Bottles, And Other Soft And Hard Plastic Materials. It Is Capable Of Pulverizing Thick Materials Into Uniform Granules For Easy Reuse, Helping To Reclaim A Substantial Amount Of Scrap. Custom Screens Are Available To Suit Specific Requirements. Br The Machine Is Constructed With Sound-proof Treatment On All Walls Of The Crushing Chamber, Ensuring Extra-low Noise Operation. It Utilizes A Deafener And Is Built With Double-layer Steel Plates And Thickened Double Layer Boards, Resulting In A Double Mute Effect And Low Noise Level. The Bunker, Main Body, And Screen Can Be Easily Dismounted For Cleaning. Br Equipped With A 2.2kw Pure Copper Motor, The Crusher Boasts A Capacity Of 100-150kg/h. The Feed Port Dimensions Are 110 Mm X 180 Mm. It Uses High-quality Steel Knives With Sharper Blades That Facilitate Easier Crushing And Significantly Improve Crushing Speed. The Machine Features A Widened Duckbill Shape And A Larger Feed Port, Allowing For Faster Material Input And Processing. Br High-intensity Steel Screws Are Used To Fasten The Knife Leaf And Knife Seat, Providing Strong Bearing Capacity. As A Heavy-duty Crusher Machine, It Maintains Stable Operation Even When Processing Hard Materials. The All-copper Motor Enables Continuous, Long-term Operation. Br 1. The Drawer Is Enlarged And Extended By 20cm Compared To The Body, Offering More Storage And Convenience For Material Collection. Br 2. The Crusher Is Designed With A Pulley System And Universal Wheels For 360 Degrees Of Rotation, Making It Easy And Quick To Move To The Desired Location. Br 3. The Feed Hopper, Crushing Knife, And Filter Are Easily Disassembled For Thorough Cleaning. Br 4. A Thickened Baffle Plate Is Adopted To Effectively Prevent Material From Flying Off During The Crushing Process. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Technical Datasheets Can Be Uploaded/ Attached To The Rfq

Description: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6 And Part 13, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. Solicitation Number 70z03825qh0000029 Is Issued As A Request For Quotation (rfq). This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-02 (effective January 3, 2025). the Applicable North American Industry Classification Standard Code Is 336413. The Small Business Size Standard Is 1,250. This Solicitation Is 100% Set-aside For Small Business. All Responsible Sources May Submit A Quotation Which Shall Be Considered By The Agency. it Is Anticipated That A Firm-fixed Price Purchase Order Will Be Awarded On A Competitive Basis As A Result Of This Synopsis/solicitation For The Following Items: item Name: Valve, Check part Number: Mjv69618-400 national Stock Number: 4820-00-152-1220 quantity: 1 manufacturer Cage Code: 8w928, 00624, 98625 only The Items Requested In This Solicitation Will Be Considered For Award. All Items Shall Have Clear Traceability To One Of The Original Equipment Manufacturer (oem), Eaton, Corporation (8w928). Traceability Means A Clear, Complete, Documented, And Auditable Paper Trail Which Traces Each Step From An Oem Or Distributor To Its Current Location. the Contractor Shall Furnish A Coc In Accordance With Federal Acquisition Regulation (far) Clause 52.246-15. Coc Must Be Submitted In The Format Specified In The Clause. contractors Having The Expertise And Required Capabilities To Provide These Items Are Invited To Submit Offers In Accordance With The Requirements Stipulated In This Solicitation. All Parts Shall Be New Approved Parts. note: No Drawings, Specifications Or Schematics Are Available From This Agency. the Uscg Intends To Issue An Order For A Quantity Of One (1) Each. Per Far 52.217-6 Option For Increased Quantity, The Uscg May Increase The Quantity By One (1) Each, For A Maximum Quantity Of Two (2) Each At The Same Unit Price As The Original Order, For Up To Three Hundred And Sixty-five (365) Days After The Initial Award Date. The Contracting Officer Will Issue A Unilateral Modification If The Uscg Chooses To Exercise This Option. see Attachment 1 - “terms And Conditions – 70z03825qh0000029” For Applicable Clauses, Instructions And Evaluation Criteria. see Attachment 2 - “schedule – 70z03825qh0000029” closing Date And Time For Receipt Of Offers Is 1/20/2025 At 12:00 Pm Eastern Time. Anticipated Award Date Is On Or About 1/27/2025. E-mail Quotations May Be Sent To Amanda.r.wood2@uscg.mil Or D05-smb-lrs-procurement@uscg.mil. Please Indicate 70z03825qh0000029 In Subject Line. notice For Filing Agency Protests united States Coast Guard Ombudsman Program it Is The Policy Of The United States Coast Guard (uscg) To Issue Solicitations And Make Contract Awards In A Fair And Timely Manner. The Ombudsman Program For Agency Protests (opap) Was Established To Investigate Agency Protest Issues And Resolve Them Without Expensive And Time- Consuming Litigation. Opap Is An Independent Reviewing Authority That Is Empowered To Grant A Prevailing Protester Essentially The Same Relief As The Government Accountability Office (gao). interested Parties Are Encouraged To Seek Resolution Of Their Concerns Within The Uscg As An Alternative Dispute Resolution (adr) Forum Rather Than Filing A Protest With The Gao Or Some External Forum. Interested Parties May Seek Resolution Of Their Concerns Informally Or Opt To File A Formal Agency Protest With The Contracting Officer Or Ombudsman. informal Forum With The Ombudsman. Interested Parties Who Believe A Specific Uscg Procurement Is Unfair Or Otherwise Defective Should First Direct Their Concerns To The Applicable Contracting Officer. If The Contracting Officer Is Unable To Satisfy Their Concerns, Interested Parties Are Encouraged To Contact The U.s. Coast Guard Ombudsman For Agency Protests. Under This Informal Process The Agency Is Not Required To Suspend Contract Award Performance. Use Of An Informal Forum Does Not Suspend Any Time Requirement For Filing A Protest With The Agency Or Other Forum. In Order To Ensure A Timely Response, Interested Parties Should Provide The Following Information To The Ombudsman: Solicitation/contract Number, Contracting Office, Contracting Officer, And Solicitation Closing Date (if Applicable). formal Agency Protest With The Ombudsman. Prior To Submitting A Formal Agency Protest, Protesters Must First Use Their Best Efforts To Resolve Their Concerns With The Contracting Officer Through Open And Frank Discussions. If The Protester’s Concerns Are Unresolved, An Independent Review Is Available By The Ombudsman. The Protester May File A Formal Agency Protest To Either The Contracting Officer Or As An Alternative To That, The Ombudsman Under The Opap Program. contract Award Or Performance Will Be Suspended During The Protest Period Unless Contract Award Or Performance Is Justified, In Writing, For Urgent And Compelling Reasons Or Is Determined In Writing To Be In The Best Interest Of The Government. The Agency’s Goal Is To Resolve Protests In Less Than 35 Calendar Days From The Date Of Filing. Protests Shall Include The Information Set Forth In Far 33.103(d) (2). If The Protester Fails To Submit The Required Information, Resolution Of The Protest May Be Delayed Or The Protest May Be Dismissed. To Be Timely Protests Must Be Filed Within The Period Specified In Far 33.103(e). Formal Protests Filed Under The Opap Program Should Be Submitted Electronically To Opap@uscg.mil And The Contracting Officer Or By Hand Delivery To The Contracting Officer. election Of Forum. After An Interested Party Protests A Coast Guard Procurement To The Contracting Officer Or The Ombudsman, And While The Protest Is Pending, The Protester Agrees Not To File A Protest With The Gao Or Other External Forum. If The Protest Is Filed With An External Forum, The Agency Protest Will Be Dismissed.

Details: Description Invitation To Bid For Construction Of Senior Citizen's Building At Mahal Na Pangalan, Calapan City, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The Sb No. 2 - 20% Df 2024 Intends To Apply The Sum Of One Million Five Hundred Fifty Seven Thousand Four Hundred Fifty Three Pesos And 78/100 (php 1,557,453.78) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “construction Of Senior Citizen's Building At Mahal Na Pangalan, Calapan City, Oriental Mindoro (ib No. Cw-2025-024)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 55 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Description Qty/unit B.5 801(1) 803(1)a 804(1)b 804(4) 900(1)c2 900(1)c3 900(1)c4 900(1)c6 902(1)a 903(2) 1046 (2) A1 1004(2) 1008(2) 1010(2)a 1010(2)b Spl 1003(1)a1 1018(5) 1018(2) 1027 (1) 1051(6) Spl-2 1032(1)a 1032(1)b 1032 (1) С 1032 (2) 1013(2)a2 & 1013(2)b1 1014(1)b2 1047(2)a, 1047(2)b 1047(10) 1001(10) & 1002(24) 1002(4) 1001(11) 1100 (10) 1101(33) 1102 (1) 1103(1) 1005(6) Project Billboard/sign Board Removal Of Structures And Obstruction Structure Excavation (common Soil) Embankment From Borrow Gravel Fill Structural Concrete (footing And Slab On Fill), Class A, 28 Days Structural Concrete (footing Tie Beam), Class A, 28 Days Structural Concrete (column), Class A, 28 Days Structural Concrete (beams/girders), Class A, 28 Days Reinforcing Steel (deformed), Grade 40 Formworks And Falseworks 100mm Chb Non-load Bearing (including Reinforcing Steel) Finishing Hardwares Aluminum Glass Windows Wooden Flush Door Wooden Panel Door Aluminum Doors 4.5mm Fiber Cement Board Ceiling On Metal Frame Ceiling Glazed Tiles Unglazed Tiles Cement Plaster Finish Railings Fabricated Concrete Signage Painting Works, Masonry, Concrete & Ceiling Painting Works, (wood Painting) Painting Works, Steel Varnishing Works Fabricated Metal Roofing Accessory Prepainted Metal Sheets, Long Span, Above 0.427mm, Rib Type Structural Steel, Trusses & Purlins Metal Structure Accessories Pipes With Connection & Cold Water Lines Plumbing Fixtures Septic Vault (concrete/chb) Conduit, Boxes, And Fittings (conduit Works/conduit Rough-in) Wires And Wiring Devices Panelboard With Main & Branch Breakers Lighting Fixtures And Lamps Window Accessory 1.00 Ea 1.00 I.s. 28.11 M3 20.90 M3 2.61 M3 10.22 M3 2.43 M3 3.61 M3 3.10 M3 2,538.09 Kg 140.67 M2 201.06 M2 1.00 I.s 1.00 I.s 3.36 M2 1.89 M2 1.00 I.s. 54.63 M2 12.85 M2 42.38 M2 340.91 M2 1.00 I.s 1.00 I.s. 339.95 M2 6.72 M2 66.66 M2 3.78 M2 49.00 M 52.25 M2 685.75 Kg 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 20, 2025 To February 03, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Pgom Will Hold A Pre-bid Conference On January 20, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before February 03, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 03, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 10. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camimil, Calapan City, Oriental Mindoro (january 20, 2025) Atty. Earl Ligorio R. Turano Ii Bac Chairperson