Wood Tenders
Wood Tenders
Municipality Of Conner, Apayao Tender
Civil And Construction...+1Building Construction
Philippines
Details: Description Republic Of The Philippines Province Of Apayao Municipality Of Conner Local Government Unit Invitation To Bid For; Project Title: Construction Of Multi-purpose Hall At Caglayan, Conner, Apayao Phase Ii Location: Caglayan, Conner, Apayao Project Id: 24mgu-infra-tfb-004 The Local Government Unit Of Conner, Apayao, Through The 20% Development Fund 2024 Intends To Apply The Sum Of Two Million Four Hundred Eighteen Thousand Nine Hundred Forty-nine Pesos And Seventy-seven Centavos Only(2,418,949.77) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Hall At Caglayan, Conner, Apayao Phase Ii Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Conner, Apayao Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 95 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From Local Government Unit Of Conner, Apayao And Inspect The Bidding Documents At The Address Given Below From Civil Registrar Office. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders At The Office Of The Municipal Civil Registrar On November 15, 2024. {insert If Necessary: And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 5. Bids Must Be Duly Received By The Bac Secretariat In Person At The Office Of Civil Registrar Office On Or Before November 22, 2024 @ 9:00 Am (i) Manual Submission At The Office Address As Indicated Above. Late Bids Shall Not Be Accepted. 6. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 7. Bid Opening Shall Be On November 22, 2024 @ 9:30 Am At The Given Address Below Lgu-premises, Caglayan, Conner, Apayao. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 8. The Local Government Unit Of Conner, Apayao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. Scope Of Work Item No. Description Unit Quantity Spl I Facilities Of Engineer Lumpsum 1.00 B.7 Occupational Safety And Health Program Lumpsum 1.00 B.5 Project Billboards Each 1.00 B.9 Mobilization/demobilization Lumpsum 1.00 900(1) Structural Concrete For Column, Girder/beam (class A, 28 Days) Cu.m. 7.64 902(1) Reinforcing Steel Of Reinforced Concrete Structures For Two To Five Storey (grade 40/ Grade 60) Kgs. 2,047.88 903(2) Formworks And Falseworks Sq.m. 184.90 1046(2)a1 100mm Chb (including Reinforcing Steel) Sq.m. 160.27 1010(2)b Doors (wooden Panel) Sq.m. 9.03 1007 Aluminum Glass Door Sq.m. 8.19 1042(1) Stainless Steel Doors And Frames Sq.m. 9.48 1008 Aluminum Glass Window Sq.m. 31.37 1027(1) Cement Plaster Finish Sq.m. 320.54 1003 Carpentry (roof Framing) Sq.m. 141.70 1003(1)a1 Carpentry (ceiling) Sq.m. 50.40 1014(1)b2 Prepainted Metal Sheets (rib Type, Long Span, Above 0.5mm Sq.m. 130.40 1013(2)a2 Fabricated Metal Roofing Accessory (flashing, Gauge 26) M 12.40 1013(2)b1 Fabricated Metal Roofing Accessory (gutter, Gauge 26) M 12.40 1018(1) Glazed Tiles And Trims Sq.m. 134.68 1018(2) Unglazed Tiles Sq.m. 118.11 1051(1) Railings Lumpsum 1.00 1001(8) Sewer Line Works Lumpsum 1.00 1002(6) Cold Water Line Works Lumpsum 1.00 1002(40) Plumbing Fixtures Lumpsum 1.00 1001(9) Storm Drainage And Downspout Lumpsum 1.00 1101(42) Wires And Wiring Devices Lumpsum 1.00 1100(10) Conduit, Boxes And Fittings Lumpsum 1.00 1102(1) Panel Boards With Main And Branch Maker Lumpsum 1.00 1103(1) Lighting Fixtures And Lamps Lumpsum 1.00 13. For Further Information, Please Refer To: Edmundo B. Desiderio Jr, Ce. Bac Sec Head-infrastructure Office Of The Municipal Engineer Vivian B. Pacis Bac Chairman-infrastructure Office Of The Civil Registrar 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps, Local Government Unit Of Conner, Apayao]
Closing Date22 Nov 2024
Tender AmountPHP 2.4 Million (USD 41 K)
City Of Bislig Tender
Publishing and Printing...+1Scraps
Philippines
Details: Description 2 Len Bar, Steel, Deformed, 10mm Dia. X 6m ₱200.00 0.5 Kg Tie Wire, G.i, #16 ₱95.00 4 Sht Board, Fiber Cement, 6mm Thk. X 4ft X 8ft ₱1,100.00 3 Sht Board, Fiber Cement, 4.5mm Thk. X 4ft X 8ft ₱880.00 2 Kg Nail, Common Wire, # 2½ ₱90.00 1.5 Kg Nail, Hardieflex, 1in ₱140.00 5 Sht Sheet, G.i, Corrugated, Gauge #24, 0.4mmth X 12ft ₱510.00 1 Kg Nail, Umbrella, 2 1/2 ₱120.00 45 Pc Panel, Pvc, Ceiling, 8mm Thk X 250mm X 2.95ml ₱400.00 4 Pc Moliding, H-connector, 8mm Thk X 2.9ml ₱110.00 12 Pc Moliding, U-connector, 8mm Thk X 2.9ml ₱110.00 12 Pc Wall Angle, Metal, 0.40mm Thk X 25mm X 25mm X 2.4ml ₱85.00 18 Pc Furring, Metal, Double, 0.60mm Thk X 17mm X 49mm X 4.5mm ₱170.00 10 Pc Channel, Carrying, Metal, 0.8mm Thk X 11mm X 37mm ₱160.00 30 Pc W-clip, Double Furring ₱10.00 3 Pc Drill Bit, Metal, 1/8in Dia. ₱150.00 2 Bx Blind Rivets, 1/8dia X 3/4, 500pcs/box ₱750.00 0.5 Kg Nail, Concrete, #1-1/2 ₱120.00 125 Pc Tile, Ceramic, Glazed, Wall, 60x60 ₱300.00 50 Pc Tile, Ceramic, Glazed, Wall, 30x60, White ₱200.00 42 Pc Tile, Ceramic, Unglazed, 30x30, White ₱120.00 4 Pc Cutting, Disc, Diamond, 4in. Dia ₱150.00 4 Bg Tile, Adhesive, 25kg/bg ₱580.00 3 Bg Tile, Grout, White, 2kg/bg ₱85.00 1 Un Water Closet, Pail Flush, Without Tank, Ordinary ₱1,500.00 1 Set Universal Toilet Wax Ring Kit, With Flange And Bolts ₱400.00 1 Len Pipe, Pvc, Series 1000, Orange, 4in X 3m ₱650.00 1 Len Pipe, Pvc, Series 1000, Orange, 3in X 3m ₱350.00 2 Pc Pipe, Pvc, Elbow, 90 Deg X 3in ₱75.00 2 Pc Pipe, Pvc, Elbow, 90 Deg X 4in ₱90.00 1 Can Solvent Cement, Pvc, 400cc ₱350.00 5 Pc Downlight, Surface Type, 15 Watts ₱300.00 2 Pc Junction Box, Pvc ₱50.00 2 Pc Receptacles, Holder, 3in ₱50.00 2 Pc Outlet, Convenience, Flush Type, 2-gang ₱150.00 25 M Wire, Copper, Stranded, Thhn/thwn, 2.0sq. Mm ₱30.00 25 M Wire, Copper, Stranded, Thhn/thwn, 3.5sq. Mm ₱35.00 1 Set Door, Pvc With Louver, 60x210cm, Including Pvc Jamb And Hinges ₱1,500.00 1 Pc Door Knob, Heavy Duty, Cylindrical Type, Stainless ₱1,000.00 10 Bg Skimcoat, 25kg/bg ₱650.00 5 Gal Paint, Acrytex, Primer ₱1,100.00 5 Gal Paint, Acrytex, Topcoat ₱1,250.00 3 Gal Reducer, Acrytex ₱550.00 5 Pc Roller, Paint, Mini, 6in Long ₱85.00 2 Btl Paint, Thinner ₱85.00 6 Pc Sand Paper, #80 ₱28.00 6 Pc Sand Paper, #100 ₱28.00 3 Set Roller, Paint W/ Tray, 10in. ₱350.00 6 Set Putty Knife, Paint W/o Handle ₱35.00 6 Can Paint, Acrytex, Tinting Color, Raw Sienna, 1/4l ₱185.00 2 Gal Paint, Epoxy Primer, Red Oxide, W/ Catalyst ₱1,000.00 4 Gal Paint, Roof Guard, Baguio Green ₱850.00 1 Gal Thinner, Lacquer ₱600.00 6 Pc Brush, Paint, White Bristle, 4in ₱120.00 6 Pc Brush, Paint, White Bristle, 3in ₱85.00 4 Pc Brush, Paint, White Bristle, 2 1/2in ₱65.00 3 Pc Brush, Steel, 4 Lens, With Wooden Handle ₱70.00 1 Pc Circuit Breaker, With Housing, 20at, 2pole ₱600.00 25 M Hose, Flexible, Corrugated, Pvc, 15mm Dia ₱10.00 4 Len Pipe, Pvc, 15mm Dia ₱85.00 4 Pc Utility Box ₱30.00 4 Pc Switch, Single Gang, Flush Type ₱120.00 3 Ro Tape, Electrical, 1in ₱60.00 Awarding By Lot But Quotation Not To Exceed Line-item Abc Requirements: 1. Mayor's / Business Permit 2. Philgeps Reg. Number
Closing Date22 Nov 2024
Tender AmountPHP 136.5 K (USD 2.3 K)
MUNICIPALITY OF BAROTAC NUEVO, ILOILO Tender
Civil And Construction...+2Construction Material, Furnitures and Fixtures
Philippines
Details: Description Item No. Item & Description Quantity Unit Concrete & Masonry Works 1 Porland Cement Type 1 185 Bags 2 Washed Sand 16 Cu.m. 3 Gravel 3/4" 7 Cu.m. 4 16mm X 6.0m Rsb (grade 40) 37 Pcs 5 10mm X 6.0m Rsb (grade 33) 200 Pcs 6 12mm X 6.0m Rsb (grade 33) 130 Pcs 7 # 16 Tie Wire 39 Kls 8 Chb #4 1726 Pcs 9 Coco Lumber 2" X 2" X 10" 30 Pcs 10 Coco Lumber 2" X 3" X 10" 40 Pcs 11 Cw Nails 4" 6 Kls 12 Cw Nails 2-1/2" 4 Kls 13 Cw Nails 1" 3 Kls 14 Nylon String 3 Roll 15 1/2" X 4" X 8" Marine Plywood 6 Roll 16 Bamboe Poles 30 Pcs 17 Plastic Binders 2 Rolls Steel Works & Roofing Works 18 Welding Rod 80 Kls 19 1.2mm X 2" X 3" C-purlins 32 Pcs 20 3/16" X 1" X 1" Angle Bar 14 Pcs 21 3/16" X 1" Flat Bar 23 Pcs 22 1/4" X 3" X 3" Angle Bar 16 Pcs 23 3/16" X 2" X 2" Angle Bar 13 Pcs 24 Prepainted Long Span Roofing 0.4mm X 9.4m (blue) 12 Pcs 25 Pre-painted Fascia Cover (white) 18 Pcs 26 Pre-painted End Flashing (blue) 10 Pcs 27 Tekscrew 2" 900 Pcs 28 Tek Screw Adaptor 6 Pcs 29 Steel Brush 3 Pcs 30 Epoxy Metal Primer (gray) 6 Pcs 31 Epoxy Reducer 2 Pcs 32 Cut Off Disc 14" 5 Pcs 33 Cutting Disc 4" 20 Pcs Painting Works 34 Flat Wall Latex 11 Gal 35 Semi Gloss Latex 22 Gal 36 Skim Coat 8 Bag 37 Sand Paper 50 Pcs 38 Pain Brush 2 1/2" 4 Pcs 39 Baby Rollers W/pan 4 Pcs Doors And Windows 40 Loose Pin Hinges 2" X 4" 2 Pcs 41 Door Knob Heavy Duty 3 Pcs 42 0.6m X 2.1m Pvc Door With Louver 1 Set 43 0.9m X 2.1m Wooden Panel Door With W/2" X 5" Door Jamb 2 Set 44 1/4" Thk Glass Sliding Window On Aluminum Frame 143 Sqft Tile Works (2nd Floor) 45 60cm X 60cm Glazed Tiles (multi Purpose Area & Office 148 Pcs 46 60cm X 60cm Glazed Tiles (wall) 16 Pcs 47 60cm X 60cm Non-skid Tiles (cr Floor) 8 Pcs 48 Tiles Adhesive 11 Bag 49 Grout 5 Kls Electrical Works 50 Panel Board (60a-main, 1-20a, 3-30a) 1 Set 51 Flexible Hose 3/4 1 Roll 52 Led 12w Watts Bulb W/ Receptacle 6 Pcs 53 2.0mm² Tth Wire 1 Roll 54 3.5mm² Tth Wire 1 Roll 55 5.5mm² Tth Wire 40 I.m. 56 8.0mm² Tth Wire 40 I.m. 57 Electrical Tape (big) 3 Rolls 58 Double Conv. Outlet (flush Type) 4 Pcs 59 1-gang Switch (flush Type) 3 Pcs 60 2-gang Switch (flush Type) 1 Pcs 61 Junction Box 4" X 4" W/ Cover 6 Pcs 62 Utility Box 2" X 4" Pvc 8 Pcs 63 1/2" Pvc Electrical Conduit Elbow (orange) 10 Pcs 64 1/2" Pvc Electrical Pipe (orange) 15 Pcs Plumbing Works 65 Water Closet W/ Fittings 1 Set 66 Lavatory W/ Fittings 1 Set 67 Stainless Floor Drain 4" X 4" 1 Pcs 68 4" Pvc Pipe S-900 5 Pcs 69 4" Pvc Elbow 90° 4 Pcs 70 4" Pvc Elbow 45° 3 Pcs 71 4" Pvc Wye 1 Pcs 72 4" Pvc Tee 8 Pcs 73 4" Pvc Clean Out 2 Pcs 74 2" Pvc Pipe S-900 5 Pcs 75 2" Pvc Elbow 90° 4 Pcs 76 2" Pvc Tee 5 Pcs 77 2" Pvc Wye 3 Pcs 78 2" Pvc P-trap 1 Pcs 79 1/2" Diameter Pvc Blue 8 Pcs 80 1/2" Pvc Ball Valve 1 Pcs 81 1/2" Pvc Elbow 90° 5 Pcs 82 1/2" Pvc Tee 12 Pcs 83 Solvent Cement 400cc 2 Cans 84 Teflon Tape 3 Pcs
Closing Date9 Dec 2024
Tender AmountPHP 586.3 K (USD 9.9 K)
National Food Authority Tender
Others
Philippines
Details: Description Invitation To Bid For The Supply And Delivery Of Various Administrative Facilities And Equipment For Nfa Region Ix For The Year 2024 (rebid) 1. The National Food Authority Region Ix, Through Its Corporate Operating Budget For 2024, Intends To Apply The Sum Of One Million One Hundred Twenty Five Thousand Six Hundred Twenty Three (php1,125,623.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply And Delivery Of Various Administrative Facilities And Equipment For Nfa Region Ix For The Year 2024 (rebid) /project Reference Nfa-rbac-ix-2024-goods-j-06. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot No. Description Qty Approved Budget For The Contract (abc) - Php 2 Digital Camera 1 Unit 63,598.00 3 Bundy Clock (biometric Attendance Machine) 2 Units 63,400.00 4 Conference Audio System 1 Set 437,095.00 Office Cubicles 12 Units 5 Television Set – 75 Inches 1 Unit 122,499.00 6 Water Storage Tank (with Installation) 1 Unit 118,713.00 7 Bed & Wooden Cabinet Sets 10 Sets 259,900.00 8 Document Scanner 1 Unit 60,418.00 Total – Approved Budget For The Contract (abc) 1,125,623.00 2. The National Food Authority Region Ix Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within The Last Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The National Food Authority Region Ix And Inspect The Bidding Documents At The Address Given Below During Working Days From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 06, 2024 To November 26, 2024, Weekdays Only From 8:00am To 5:00pm And November 27, 2024 From 8:00am To 9:30am From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Nfa Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Nfa Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. Lot No. Approved Budget For The Contract Bidding Documents Fee (php) 2 63,598.00 500.00 3 63,400.00 500.00 4 437,095.00 500.00 5 122,499.00 500.00 6 118,713.00 500.00 7 259,900.00 500.00 8 60,418.00 500.00 6. The National Food Authority – Region Ix Will Hold A Pre-bid Conference Scheduled On November 14, 2024 At 09:30 A.m. At Nfa Regional Office Ix Atrium, San Roque, Zamboanga City Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Below On Or Before November 27, 2024 At 9:30 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024 After The Set Deadline For Submission Of Bid Documents At Nfa Regional Office Ix Atrium, San Roque, Zamboanga City. Bids Will Be Opened In The Presence Of The Bidder Or Their Duly Authorized Representatives Who Choose To Attend The Activity. 10. The National Food Authority Region Ix Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Malou Kareen G. Sarenas Chairperson, Rbac Secretariat National Food Authority Regional Office Ix Tiguma, Pagadian City Tel. No. (062) 991-1828/ (065) 215-2021 Email: Bac.region9@nfa.gov.ph 12. You May Visit The Following Websites: For Downloading The Bidding Documents: Https://nfa.gov.ph/announcement/bids-and-auction Https://philgeps.gov.ph/ Date Of Publication: November 6, 2024 Joann B. Bernardo Oic-branch Manager And Rbac Chairperson, Nfa Region Ix
Closing Soon27 Nov 2024
Tender AmountPHP 1.1 Million (USD 19 K)
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Philippines
Details: Description Invitation To Bid For 25ei0076 - Construction Of Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay, Oriental Mindoro /25ei0076. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay, Oriental Mindoro Contract Id No. : 25ei0076 Locations : Mansalay, Oriental Mindoro Scope Of Works : Construction Of 1-unit Two (2) Storey Multi-purpose Building (sk Building) At Barangay Poblacion, Mansalay. This Includes Earthworks, Reinforced Concrete Wokrs, Finishing And Other Civil Works Such As Termite Control Works, Such As Termite Control Works, Storm Drainage And Sewerage System, Plumbing Works, Installation Od Ceilings, Installation Of Steel Doors And Frames, Aluminum Glass Door And Windows, Wooden Doors, Waterproofing, Installation Of Glazed Tiles And Unglazed Tiles, Plastering, Masonry Painting, Masonry Works, Installation Of Stainless Railings (ramp) And Electrical Works. Approved Budget For The Contract : Php 4,950,000 Contract Duration : 180 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 - December 03, 2024 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On November 19, 2024 At 8:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before December 03, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 03, 2024 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson
Closing Date3 Dec 2024
Tender AmountPHP 4.9 Million (USD 83.9 K)
Municipality Of San Isidro, Northern Samar Tender
Others
Corrigendum : Closing Date Modified
Philippines
Details: Description 1. 10 Rolls Plastic Mulch 1.2m (4ft.) X 400m, Black Or Silver Black, Heavy Duty 2. 10 Rolls Plant Nets Width 4ft X 30 Yards/roll 3. 20 Rolls Uv Plastic Sheet Heavy Duty 6 Mill/150 Microns 10ftx50ft. 4. 10 Rolls Uv Plastic Sheet Heavy Duty 8 Mil/200 Microns 10ftx 50 Meters Long 5. 200 Rolls Green House Film Foil, Greenhouse Outdoor Cover Plastic Sheet 9ft.width, 1 Meter Length 150 Microns, Polyethylene Material, Light Blue 2 Or 2.5 Meters Wide, Uv Resistant Package Content: 1 X Greenhouse Film Without Bracket. 6. 50 Pcs. Bracket Greenhouse 7. 15 Rolls Trellis Net 3x 11 Meters 8. 5 Rolls Black Nylon Shade Garden Greenhouse 8ft X 30m 9. 25 Pcs. Tunnel Hoop Household Garden Tool Plant Hoop Grow Frame Bandle 10. 10 Rolls Insect Net Fine Screen Nets 10ft/yard 11. 4 Rolls Greenhouse Film Foil Pet Greenhouse Outdoor Living Plant Cover Plastic Sheet Tunnel 2.5 Wide 12. 20 Pcs. Bolo 13. 20 Pcs. Pala/shovel 14. 20 Pcs. Garden Rake 15. 20 Pcs. Piko ( Wooden Handle Pick/tick Mattoks) 16. 4 Packs Seedling Try 100 Pcs.each Pack (100 Holes) 17. 10 Sacks Cocopeat Invitation To Bid For Supply And Delivery Of Farm Tools And Equipment’s 1. The Local Government Unit Of San Isidro, Northern Samar, Through The General Fund Intends To Apply The Sum Of Two Hundred Forty Two Thousand Five Hundred Eighty Pesos Only. (php242,580.00) Being The Abc To Payments Under The Contract For Supply And Delivery Of Farm Tools And Equipment’s . Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. The Local Government Unit Of San Isidro, Northern Samar Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required 30 Calendar Days. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 3. Prospective Bidders May Obtain Further Information From Local Government Unit Of San Isidro, Northern Samar And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 To 12:00 In The Morning And 1:00 To 5:00 In The Afternoon. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders During Office Hours From November 09, 2024 Until 9:00 A.m. Of December 02, 2024 From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of P500.00. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 5. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before Nine O’clock In The Morning (9:00 Am) Of December 02, 2024 At The Bids And Awards Committee, 2nd Floor, Municipal Building, Poblacion Sur, San Isidro, Northern Samar. All Bids Must Be Accompanied By The Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bidder’s Representative May Likewise Acquire The Bidding Documents Upon Presentation Of The Following Documents And Proof That The Bidder Have Ordered The Bidding Documents In The Philgeps (included In The Drl), To Wit: A. Duly Notarized Special Power Of Attorney/authorization Letter; B. Photocopy Of The Authorizing Officer’s Identification Card (id); C. Photocopy Of Representative’s Identification Card (id). 6. Bid Opening Shall Be On Nine O’clock In The Morning (9:00 Am) Of December 02, 2024 At 3rd Floor, Conference Room, Municipal Building, Poblacion Sur, San Isidro, Northern Samar. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Local Government Unit Of San Isidro, Northern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Diana C. Balunan Bac Secretariat Bids And Awards Committee G/f Municipal Building, Poblacion Sur, 6409 San Isidro,northern Samar Contact No. 09533855113 Email Address: Bac.sanisidro@gmail.com 9. You May Visit The Following Websites: 10. For Downloading Of Bidding Documents: Https://philgeps.gov.ph Https://sanisidro-nsamar.gov.ph [november 09, 2024] John M. Puayap Mpdc/gso Designate/bac Chairperson
Closing Date2 Dec 2024
Tender AmountPHP 242.5 K (USD 4.1 K)
Department Of Agrarian Reform - DAR Tender
Philippines
Details: Description Project : Repair And Improvement Of The Comfort Room And Office Of The Board Member - Darab Location: Darco Compound, Elliptical Rd. Quezon City Duration: 15c.d. Item No. Items & Description Unit Qty Unit Price Total Price I Demolition & Removal Works 16.74 Sq.m Demolition Of Existing Comfort Room Ceiling Chipping Of Existing Comfort Room Tiles Removal Of All Plumbing Fixtures Ii Tile Works 24.43 Sq.m Homogeneous Porcelain Wall Tiles 30cm X 60cm (white Color)(cr Wall) 75 Pcs Textured Porcelain Tiles 30cm X 30cm (marble White Color)(cr Flooring)(non-skid) 29 Pcs Tile Adhesive 25kg Per Bag 5 Bags Grout 5kg Per Bag 2 Bags Portland Cement 40kg Per Bag 5 Bags Sand(bistay) 2 Cu.m Water Proofing Compound 908g Per Bag 5 Bag Tile Spacer (200 Pcs Per Pack) 4 Packs Wooden Pvc Vinyl Tiles 910mm X 150mm X 2mm (narra Ply Textured) Acrylic Flooring Adhesive 5kg Per Gallon 3 Gallons Labor Iii Painting Works 10 Sq.m Flat Latex Paint Primer (white) 4l 6 Gallons Semi-gloss Latex Top Coat (white) 4l 6 Gallons Flat Wall Enamel (white)4l 2 Gallons Wall Putty 4l 2 Gallons Roller Brush 7” 5 Pcs Baby Roller 4” 8 Pcs Paint Brush 1” 6 Pcs Paint Brush 1-1/2” 6 Pcs Paint Brush 4” 3 Pcs Sandpaper #100 Waterproof 15 Pcs Sand Paper #120 Waterproof 20 Pcs Sand Paper #240 Waterproof 30 Pcs Paint Thinner 4l 2 Gallons Lacquer Thinner 4l 2 Gallons Labor Iv Plumbing Works 1 Lot Water Closet With Complete Fixture & Accessories 1 Set Over The Counter Lavatory Set (ceramic)(white) With Faucet (stainless), Complete Fitting & Accessories 1 Set Stainless Floor Drain 4” 1 Pc Pvc Solvent Cement 400cc 1 Can Joining Epoxy A And B 4l 1 Can White Latex Adhesive Caulk 2 Pcs Elastomeric Sealant 1l 1 Can Teflon Tape (19mm X 15m X 0.2mm) 3 Pcs Ceramic Tissue Holder 1 Pc Bidet Stainless 1 Pc Angle Valve (3-way W/ Control Each, ½”dia X ½”dia) 1 Pc P-trap For Lavatory 2” 1 Pc Tail Piece 1-1/4” 1 Pc Stainless Steel Door Lock Set 2 Pcs Labor V Electrical Works 2 Gang Switch (universal) 1 Pc 15watts Round Pin Light Led 6” Diameter 1 Pc Electrical Tape 0.16mm X 19mm X 16m 1 Pc Insulation Tape 0.16 X 19mmx 16m 1 Pc Pvc Junction Box (2” X 4”) 4 Pcs 2-gang Convenience Outlet (ordinary) 3 Pc Thhn/thwn-2(3.5mm2 Stranded) 25 L.m Utility Knife Cutter (25 X 140mm) 2 Pcs Flexible Hose ½ 50m Per Roll 1 Roll Labor Vi Ceiling Works 2.31 Sq.m Metal Furring (ga 24/0.60mm) 2 Pcs Carrying Channel (ga 24/0.60mm) 2 Pcs Double U-clip 7 Pcs Wall Angle (ga 24) 3 Pcs Blind Rivets 1/8”dia X ½” (150pcs Per Box) 1 Box Gypsum Board (12mm) 2 Roll Gypsum Mesh Tape 45m Per Roll 1 Roll Gypsum Black Screws 1” (100 Pcs Per Box) 1 Box Ceiling Exhaust Fan 8” 1 Set Drill Bit 6mm Ø 5pcs/set 1 Set Labor Total: Abc: Mode Of Procurement: End User: Payment Mode: Php 163,593.35 Small Value Procurement (section 53.10) Darab Bm Iii Government Terms The Submitted Price Quotations Should Be Subject To The Terms And Conditions Of This Rfq (see Annex “a”) Supplier/bidder’s Company Name Tin Address Contact No. Email Add Supplier/bidder’s Name/authorized Representative Signature Over Printed Name Date Request For Quotation (rfq) – Small Value Procurement (section 53.10) A. Eligibility Requirements 1. Completely Filled-up And Duly Signed Quotation Must Be Submitted At The Procurement Division, Dar Central Office, Ground Floor Elliptical Road, Diliman, Quezon City Or Through Darco.bacsecretariat.b@dar.gov.ph. 2. Quotation Shall Be Submitted With The Following Requirements, To Wit: A. Copy Of Valid Mayor’s/business Permit B. Copy Of Philgeps Registration Number/ Philgeps Platinum C. Income/business Tax Return D. Philippine Contractors Accreditation Board (pcab) License E. Joint Venture Agreement, If Applicable F. Omnibus Sworn Statement G. In Case The Owner Is Not The Signatory Of Price Quotation Form I. Special Power Of Authority - For Single Proprietorship Ii. Secretary’s Certificate - For Corporation/partnership/joint Venture
Closing Soon26 Nov 2024
Tender AmountPHP 163.5 K (USD 2.7 K)
Ministry Of Culture Tender
Others
Corrigendum : Closing Date Modified
France
Details: Lot 01: Common Site Facilities – Scaffolding – Hoist – Masonry – Reinforced Concrete – Plastering Lot 02: Roofers’ Scaffolding – Metal Roofing – Lightning Rod Lot 03: Exterior Metal Joinery – Ironwork – Wood Joinery Lot 04: Self-Protected Waterproofing Lot 05: Electricity Lot 06: HVAC – Smoke Extraction Lot 07: Standard Painting Lot 08: Blinds – Zenithal Blinds
Closing Date12 Dec 2024
Tender AmountRefer Documents
Municipality Of Esperanza, Masbate Tender
Philippines
Details: Description 1. The Municipality Of Esperanza, Masbate Through The Dole Region V Fund Intends To Apply The Sum Of One Million Eight Hundred Sixty-two Thousand Four Hundred Forty-three Pesos And 60/100 Only (₱1,862,443.60) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply And Delivery Of Materials, Supplies And Equipment For The Provision Of Livelihood Opportunities To Parents Of Child Laborers In The Municipality Of Esperanza, With Project Reference Number (prn) Of Esperanza-gds-2024-11-29. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Esperanza, Masbate Now Invites Bids For The Supply And Delivery Of Materials, Supplies And Equipment For The Provision Of Livelihood Opportunities To Parents Of Child Laborers In The Municipality Of Esperanza, With Project Reference Number (prn) Of Esperanza-gds-2024-11-29, With The Following Specifications: Item No. Qty. Unit Description Carpentry 3 Pieces 1. Claw Hammer, Head Weight;160z; Overall Weight;170z-23oz; Forged Steel Head; Smooth Face; Fiberglass 2 Units 2. Angle Grinder, Portable, 4 'capacity, 220-240v/60hz., 710 Watts, With Side Handle Grips, Angle Grinder Guard, Power Plug: Us Type 3 Units 3. Circular Saw, Voltage; 220-240v-frequency 50/60hz Input Power: 1400w No-load Speed; 4800rpm Blade Diameter; 185mm Cutting Capacity;45 Degree: 44mm 90 Degree;65 Mm Maximum Cutting Depth: At Least 90 Degree 62mm, Weight Maximum 5.2kg; Item Approx. Dimension 15-17cm, 25-28cm, 30-35cm 3 Sets 4. Combination Wrench, 16pcs, (6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm 21mm, 22mm, 24mm, 27mm, 30mm, 32mm), Drop Forged Alloy Or Chrome Vanadium Steel Construction, Lobular Box End Design 2 Pieces 5. Crow Bar, 36 'long; Length Tolerance; - 1/8 Forged Steel Carbon 3 Units 6. Electric Grinder Continuous Rating Input; 850w Wheel Diameter: 100mm (4" Inch) No Load Speed: 11,000r/min Dimension (lxwxh): 273x118x101mm (10/34x4-5/8x4") Net Weight: 1.8 Kg(4.0lbs.) Power Supply Cord: 2.0m 6.6ft.) 3 Units 7. Electric Planer Rated Input Power: 650w Planing Width; 82mm Cutting Depth: 0-2.6mm Weight:2.8kg Adjustable Rebating Depth: 0-9mm No-load Speed: 16,500rpm Dimension: 158mmx20mmx140mm Powerful Planer With Max. 2.6mm Cutting Depth Powerful 650 W Motor 3 Pieces 8. Portable Jig Saw, Input Power; 600-850w; Power Voltage: 220-240v; Frequency: 60hz; Adjustable Blade Angle Up To 45 Degrees; Cord Length: 1 Meter; Plus Type; Us Type; With Variable Speed Setting; Top Handle With Quick Release Blade 3 Sets 9. Wood Chisel; 4-pcs. Set(6mm;12mm;19mm;25mm) Tempered Chrome Carbon Steel Blade, Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 1 Unit 10. Electric Router Large Plunge Capacity 0-65mm (0-2-3/8") Continuous Rating Input:1,600wm Cap.: Collet: 1/2"m Plunge Capacity:0 - 65mm (0 - 2-9/16")m Base Dia.:160mm (6-1/4") No Load Speed (rpm):23,000/min Height:287mm (11-1/4" 1 Piece 11. L-square Ruler; Material : Stainless Steel Measure Length :10 / 25cm;ruler Size :10 X 4.5(l*w) / 25.3cm X 11.4cm(l*w) Weight :102.4g 1 Piece 12. Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade: Dimension 16ft. (l) X 25mm (w) Dried Fish Making/vending 2 Rolls 1. Net For Fish Drying 1 Roll = Approx30meters For Every 1meter Measurement: Width 2.5meters (105inches) X Length 1meter (39inches) Nylon Mesh Any Color 1 Piece 2. Basin, 22 Inch, Plastic Material, 1" Thickness 1 Piece 3. Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 1 Piece 4. Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 1 Piece 5. Cutting Board, 38x25cm Marble, Double Sided 1 Piece 6. Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 1 Piece 7. Fish Scaler, 20cm Stainless Steel 1 Piece 8. Fish Scraping Tool, 20cm Stainless Steel 1 Piece 9. Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 6 Pieces 10. Styro Box / Big / Size : (l) 22” X (w) 15 “ X (h) 17” 1 Pack 11. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 15 X 20cm 1 Pack 12. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 17 X 25cm 1 Pack 13. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 20 X 30cm 1 Pack 14. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 25 X 35cm 1 Unit 15. Vacuum Sealing Machine, Size: 35 Cm * 14.7 Cm * 6.7 Cm, Color: White Weight: 1.2kg, Material: Abs Material, Accessories: Machine *1, Rated Voltage: 220v, Rated Frequency: 50hz, Rated Power: 110w, Vacuum: -65kpa, Vacuum Sealing Time: 10-25s, Single Sealing Time: 6-17s 1 Unit 16. Weighing Scale: Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) Fishing 21 Pieces 1. Banka With Marine Engine (banka Fiberglass With 17ft. Long Katig, L-15ft., Wide-2ft.,depth-2ft.) Gasoline Marine Engine 4-stroke Model: Se 75m Max. Hp 7.5hp, Displacement: 212cc Max Rpm: 3600 (please See Attached Photo Design) 2 Units 2. Diesel Marine Engine 12hp Type: Single Cylinder, Vertical, Air Cooled, 4 Stroke, Direct Injection Bore & Stroke: 86*72 Displacement: .418l Compression Ratio: 19 Horsepower. 12hp Rotation Speed: 3600 Rpm Starting System: Marine Pulley Fuel Tank Capacity: 5.5liters Lube Oil: Sae 10w-30, 15w-40 Lube Oil Capacity: 1.65liters Dimension:420*440*49 2 Bundles 3. Pamo #4 2,000 Pieces 4. Pataw # 3 1 Piece 5. Stainless Steel Round Bar Shafting 1" X 1 Meter Length 9 Bundles 6. Lambat Nylon #4 .25(1000 Mtrs. Is Equal To 1 Bundle) 10 Bundles 7. Lambat Nylon #7 .25(1000 Mtrs. Is Equal To 1 Bundle) 12 Rolls 8. Pisi #7 30 Kilograms 9. Tingga Pahaba 1 Bundle 10. Lambat Nylon #6 .25(1000 Mtrs. Is Equal To 1 Bndle) 12 Kilograms 11. Nylon #130 4 Kilograms 12. Nylon #140 2 Bundles Pamo Fishing Net #25 Food Vending 19 Pieces 1. Caldero Cast Iron 48cmx42cm Depth X Diameter 20 Liters Double Handle 0.5cm Thickness 17 Sets 2. Casserole (5pcs Aluminum) 16,18,20,22,24cm 10 Pieces 3. Food Glass Stand, With Aluminum Frame Glass And Screen Sliding Door (18x 20 X 36cm) 2 Layers 16 Pieces 4. Food Tong (12 Inches ( 29 X 4.6cm ) Stainless Steel) 15 Pieces 5. Kawa Cast Iron 45 Cm X 10" Depth 20 Pieces 6. Kawali Cast Iron Up To Handle 5 28.5cm X High 7.3cm 17 Sets 7. Knife Set Material: Stainless Steel 6.5’’cleaver 8’’chef Knife 8’’slicer Knife 5’’utility Knife 3.5’’fring Knife 1pc Scissor 21 Sets 8. Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device; Safety Push Protection For Leakage; Gas Auto Safe Controller; Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp 16 Pieces 9. Sandok Size 3 - 12 Inches Stainless Steel 21 Units 10. Stove Double Burner (automatic Ignition Powerful Flame Controller, Stainless Steel Body, (weight:3.43kg) 710x390x145mm) 12 Pieces 11. Strainer Stainless Steel 28cm 4 Sets 12. Monobloc Plastic Table And Chair Set (6 Seaters) Table Size: 30*48 In Green 1 Piece 13. Basin, 22 Inch, Plastic Material, 1" Thickness 90 Pieces 14. Food Tray Stainless Steel W/ Glass Cover (h - 7cm, W - 26cm, L - 33cm) 4 Pieces 15. Chopping Board Diameter 30cm Size: 36x45x2 11 Pieces 16. Palamig/ Juice Dispenser, Acrylic With Free Plastic Ladle 12liters, 9x16 Inches 8 Pieces 17. Pressure Cooker, Food Grade Aluminum Alloy, 19cm-height, 18cm-handle Length With Rubber, 20cm Diameter 15 Sets 18. Steamer Stainless Steel With Heat Resistant Handle 5 Layers (height:l 17.2cm,diameter:25.7cm) 5 Units 19. Blender, 5-6 Cups (1.25l To 1.5l) Heat Resistant Glass Jars, 450watts Motor, 220v-250w, 10-speed Push Button; With Pulse Option For Precise Blending, Power Plug: Us Type 6 Pieces 20. Mixing Bowl Medium, Diameter:28cm, Height:11.2cm, Stainless 4 Pieces 21. Baking Sheet / Tray, Stainless Steel Plain Food Serving Tray Baking Sheet Pan Rectangle 4.8cm Deep 27x20x4.8cm 2 Units 22. Baking Electric 4-layer Oven 220v, 50*30*40cm, 8kg, Digital Control, Digital Display, Easy Cleaning, Mechanical Control, Timer 48l Large Capaciy 1 Set 23. Lpg 11kg W/ 1.5m Hose And Full Valve Regulator, With 2pcs Hose Clamp (complete Set) 2 Pieces 24. Measuring Cups (set For Dry), 8pcs. Slique Stackable Compact Measuring, Stainless 2 Units 25. Rice Grinder Voltage: 220v 50-60hz Motor Power: 2.2 Kw Motor Speed: 1400 R/min. Production Particle Size: 25-100 Mesh Size: 65x25.5x74.5cm Weight: 30kg Motor: Copper Core 150 Steel Mill Model: Powder 70kg/h Slurry 60kg/h 1 Unit 26. Nego Kart With Bicycle W/ Gas Stove Burner Hole Nego Kart Specification: Roofing: Polycarbonated Roof (170x117x30.5cm); Angle Bar Steel Framing (welded); Blind Rivets Body (cart): Tubular Steel Framing (welded); Stainless Steel Sheet As Top Cover (130x75cm); 2 (70x55cm) Folding Ledges W/ Stainless Steel Sheet Supported By Round Tube Steel Pipe About 2mm, 1 (130x20cm) Fixed Front Ledge With Stainless Steel; Blind Rivets; Plain G.i Sheet On Internal Flooring Supported By 5mm Flat Bar Iron And Steel Bar Iron; Body Covered By Plain Gi Sheet; Fully Painted Internally & External Color Blue; Hole: Gas Stove Burner (600mm Dia, 150mm Depth); With 1 Side Wheel: Tire Size (20" X 2.125 Jumbo), Interior Tube (20" X 2.125); With Entire Front Weatherproof Sticker Logo Of Dole And Dilp & Tourism Spot Bicycle Specifications: Bmx Type Bike Frame Front And Rear Free Wheel Hub For Rim Set Single Speed Tread Type (wheel Set), Tire Size (20" X 2.125 Jumbo), Interior Tube (20" X 2.125) Bmx Handlebar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp With Spring), Crank Pedals (175mm-180mm Cracks)." 2 Pieces 27. Spatula (big), 1pc. Heat Resistant Silicone 1 Unit 28. Stove, Stove Type: Gas, Number Of Burners:3, Input Voltage:240v, Power Consumption:500w, Weight:7kg, Dimension (l X W X H): 56cm X 26cm X 9.5cm Heavy Duty 6 Pieces 29. Sandok: Length: 27cm, Width Of Scooper: 7cm Stainless Steel 1 Piece 30. Barbeque Grill Folding Thick Stainless Steel - Size: (l)60cm X (h)22cm X (w)33cm Black Color 1 Unit 31. Weighing Scale: Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 2 Pieces 32. Syanse Size 3 - 12 Inches Stainless Steel 1 Piece 33. Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles; 12 Inch Long 1 Unit 34. Coconut Grinder (hxlxw) 15cm X 16.5cm X 13cm, 1/2", 220v/60hz/1.1a, 370w, 3470rpm Welding 1 Pair 1. Angle Grinder Cutting Discs, 4", 107x16mm 1 Unit 2. Angle Grinder, Portable, 4" Capacity, 220-240v/60hz, 710 Watts, With Side Handle Grips, Angle Grinder Guard, Power Plug: Us Type 1 Piece 3. Ball Pein Hammer, Weight: 16oz/450g, Drop-forged Hammerhead, Heat Treatment, 45 Carbon Steel, Fiberglass Handle 1 Piece 4. C Clamp, Alloy Steel, Size- 6", Depth- 40mm, Max Clamp- 23mm, Body Width- 75mm, Jaw Length- 17mm, Jaw Width- 21mm, T Length- 178mm, Weight- 196 1 Piece 5. Chipping Hammer, 290mm Chisel And Point Hammer With Spring Handle, 300g 1 Piece 6. Gloves, Rubber Material, 16" Or 43cm 1 Piece 7. Hammer (maso), 2lbs Double-faced Steel Head With Rubberized Handle, 29.5cm Long 1 Piece 8. Metal File, 6pcs File/set, Diameter- 3mm, Size- 140mm (5.5") 1 Unit 9. Portable Welding Machine, 2 In 1 Inverter Welding Machine 200 Apms, 220-240v, 60hz, 1pc Tig Torch Set, 1 Pc Electrode Holder, 1 Pc Ground Clamp, Duty Cycle 60% Or Higher, Power Plug: Us Type B 1 Piece 10. Sheet Metal Gauge, Metal, 72x25mm 1 Piece 11. Speed Square,6" Triangular Ruler, Aluminum Alloy, 180mm, 255mmspeed Square 1 Pair 12. Welding Boots, Leather Material, Heel Height: Low (1cm-3cm), Boot Height: Knee-high 1 Piece 13. Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered, Light Shade:din9-13, Dark Shade: Din4, Way To Shift Dark State: Outer Control Stepless Shift, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Delay Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area 93mmx43mm, Active Viewing Area Size: (+/- 10mm) 1 Set 14. Welding Magnets, 6pcs/set (2 X 75lb) (2 X 50lb) (2 X 25 Lb) 1 Piece 15. Welding Pliers, 210mm, L-220mm, H- 11mm, W- 55mm 1 Piece 16. Welding Rod Holder, Upper Iron, Lower Brass (300 Amp Capacity) 2.0 - 6.35mm (5/64"-1/4") Length- 250mm 10 Kilograms 17. Welding Rod, 2.0mmx300mm (5/64"x12") Delivery Of The Goods Is Required To Be Delivered For A Period Of Fifteen (15) Days From Receipt Of Ntp. Bidders Should Have Completed, Within Twenty-six (26) Calendar Days From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Esperanza, Masbate And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm Philippine Standard Time (pst). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 2, 2024 To December 16, 2024 During 8:00am To 5:00pm Pst From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱5,000.00). 6. The Municipality Of Esperanza, Masbate Will Hold A Pre-bid Conference On The Aforementioned Procurement On December 2, 2024 At 10:00am Pst At The Conference Hall, 3rd Floor, Municipal Building, Poblacion, Esperanza, Masbate. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below Before December 16, 2024 At 2:00pm Pst. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 16, 2024 At 2:00pm Pst At The Conference Hall, 3rd Floor, Municipal Building, Poblacion, Esperanza, Masbate. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Esperanza, Masbate Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.
Closing Date16 Dec 2024
Tender AmountPHP 1.8 Million (USD 31.5 K)
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Philippines
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00127 : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao 1. The Dpwh Regional Office Ii, Through The 2024 Ps-dbm Revolving Fund Intends To Apply The Sum Of ₱64,525,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00127: Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao Contract Id No. : 24b00127 Location : Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Brief Project Description : Ps-dbm Building, Generator Set With Generator Set House And Concrete Pavement, Building = 23.0 X 33.8 Meters Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures Equipment & Appliances For The Field Office Of The Engineer Other General Requirements • Permits And Clearances • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Additional Geotechnical Investigation Earthworks • Trees (furnishing And Transplanting) • Clearing And Grubbing • Removal Of Trees • Structure Excavation • Embankment (from Structure Excavation And Borrow) • Gravel Fill Subbase And Base Preparation • Aggregate Subbase Course Surface Courses • Pccp, 0.15m Thick, 14-day Concrete Plain And Reinforced Concrete Works • Structural Concrete, (3000 & 4000) Psi, Class A, 28 Days • Lean Concrete • Reinforcing Steel Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling, Metal Frame, Gypsum Board • Aluminum Metal Cladding • Modular Partition • Louver Window • Flush Door • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (casement, Awning, Fixed) Type • Frames (jambs, Sills, Head, Transoms And Mullions) • Doors, (flush, Wood Panel) • Roll-up Doors • Waterproofing, Liquid • Built-up And Preformed Membrane • Canopy Drain With Strainer • Unglazed Tiles • Cement (floor, Plaster) Finish • Stucco Finish • Painting Works, (masonry/concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel), (100 & 150) Mm • Louver Block • Metal Structure Accessories • Metal Railing (steel) • Sanitary/plumbing Fixtures • Cold Water Lines • Sewer Line Works • Storm Drainage And Downspout Electrical Works • Rigid Steel Conduit • Rigid Polyvinyl Chloride Pipes (pvc/upvc) • Boxes/wire Gutter • Fittings And Accessories • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three-way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Pop-up Type/floor Duplex Convenience Outlet/receptacle (gt) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pad Mounted Distribution Transformer (oisc) With Complete Accessories • Generator (single Or Three Phase - Standby) • Lighting Fixtures Electronic Works • Network Cabling • Cctv System • Network Video Recorder • Lcd, Led Monitor • Door Access And Card Reader System • Public Address System • System Management Amplifier • Remote Microphone • Ceiling Speaker • Wall Mount Speaker • Wires/cables • Fire Alarm System • Smoke Detector With Base • Heat Detector With Base • Fire Alarm Control Panel • Manual Pull Station Switch • Back-up Battery Pack Mechanical Works • Ventilating Equipment • Exhaust Fan (ceiling Cassette, Wall Mounted, Wall Mounted, Industrial Type) • Booster Pump With Control • Water Tank (stainless) • Fire Department Connections For Wet And Dry Type System • Air Conditioning System (vrf/vrv) • Service Elevator Approved Budget For The Contract (abc) : ₱64,525,000.00 Contract Duration : 243 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 47 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - 26, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 13, 2024, 1:00 Pm At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 26, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 26, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 6 -12, 2024 Conspicuous Place (procurement Bulletin Board): November 6 -12, 2024
Closing Soon26 Nov 2024
Tender AmountPHP 64.5 Million (USD 1 Million)
2451-2460 of 2546 active Tenders