Wood Tenders

Details: Description Republic Of The Philippines Province Of Cebu Municipality Of Balamban Balamban, Cebu Tel. No: (032) 345-8220 Office Of The Bids And Awards Committee Invitation To Bid For Various Infrastructure Projects Of The Municipality (materials Only) 1. The Municipality Of Balamban, Through The Various Sources Of Funds, Intends To Apply The Sum Of One Million Nineteen Thousand Four Hundred Fifteen Pesos Only (₱ 1,019,415.00) Being The Total Approved Budget For The Contract (abc) To Payments Under The Contract Stated. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Project Source Of Funds Abc Construction Materials (for Replacement Of Electric Power Mayor’s Office – Other Infra Assets ₱ 526,410.00 At Municipal Park,poblacion Balamban Cebu) Materialsonly Continuing Approp. & Current Materials Only Construction Materials (for Rehabilitation Of Concrete Sef – Sb#1 – School Building ₱ 354,210.00 Canopy No.1 Imelda Marcos Building At Balamban Current Central Elementary School Poblacion Balamban Cebu) Materials Only Construction Materials (for Rehabilitation Of Mayor’s – Flood Control System ₱ 138,795.00 Drainage Canal Of Rhu I Building At Poblacion Continuing Balamban Cebu) Materials Only 2. The Municipality Of Balamban, Now Invites Bids For The Various Infrastructure Projects Of The Municipality. Delivery Of Goods Is Required 30 Days After The Issuance Of The Notice Of Award. Bidders Should Have Completed, Within 2 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Right Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Municipality Of Balamban And Inspect The Bidding Documents At The Address Given Below During 8:00 Am- 12:00 Am And 1:00 Pm- 5:00 Pm, Monday To Friday Only. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders November 20 - 27, 2024 From The Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (₱ 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 28, 2024. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On November 28, 2024 At 1:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. Each Bidder Shall Submit One (1) Certified Copy From The Original Copies Of The First And Second Components Of The Bid. Bidders Shall Enclose Their Original Eligibility And Technical Documents In One Sealed Envelope Marked “original-technical Component”, And The Original Of Their Financial Component In Another Sealed Envelope Marked “original- Financial Component”, Sealing Them All In An Outer Envelope Marked “original Bid”. 10. Each Copy Of The First And Second Envelopes Shall Be Similarly Sealed Duly Marking The Inner Envelopes As “copy 1- Technical Component” And “copy 1- Financial Component” And The Outer Envelope As “copy 1”, Respectively. These Envelopes Containing The Original And The Copy Shall Then Be Enclosed In One Single Envelope. All Envelopes Shall Contain The Name Of The Contract To Be Bid In Capital Letters; Bear The Name And Address Of The Bidder In Capital Letters; Be Addressed To The Procuring Entity’s Bac And; Bear A Warning “do Not Open Before…” The Date And Time For The Opening Of The Bids. Bidders Are Also Required To Provide Table Of Contents With Corresponding Tab/label For Each Submitted Technical And Financial Components Of Its Bid. 11. The Municipality Of Balamban Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jelyn K. Subang Bac Secretariat Bac Office, Market Operations Bldg.,/mbo Balamban, Cebu (032) 345-8220 Loc. 142 And 181 November 19, 2024 Adonis E. De Pio Bac Chairman Construction Materials (for Replacement Of Electric Power Into Solar Lights At Municipal Park, Balamban Cebu) Materials Only 80 Sets Solar Motion Lamp Post Light Ufo Style 400w With Bracket 25 Sets Outdoor Solar Flood Light 200w (separate Solar Panel) 15 Pcs Metal Cutting Disc 4" 2 Pcs Metal Cutting Disc 14" 15 Kg Welding Rod E6012 5 Pcs Grinding Stone4" 1 Lngths Gi 4" X 6m Sch 40(20ft) 5 Lngths 10mm X 6m Def. Bar 5 Lngths 12mm X 6m Def. Bar 5 Bags Portland Cement 0.5 Cu M Wash Sand 0.5 Cu M 3/4 Gravel 2 Shts 1/2 Phenolic Board 4'x8' 6 Lngths 2x2x10' Coco Lumber 1 Kg No.16 Tie Wire 1 Kg 4"cwn 1 Kg 1 1/2" Cwn 2 Pcs Construction Pail (big) 1 Gal Paint Thinner 3 Gals Quick Dry Enamel (black) 3 Pcs Baby Roller With Handle 4" 3 Pcs Paint Brush 2 1/2" 2 Pcs Paint Tray 400 Pcs Tox With Screw 10mm 400 Pcs Washer For Tox Woth Screw 10mm 360 Pcs Tox With Screw 12mm 10 Pcs Topgrade Drill Bit 5/16 Masonry Construction Materials (for Rehabilitation Of Concrete Canopy No.1 Imelda Marcos Building At Balamban Central Elementary School Poblacion Balamban Cebu) Materials Only 50 Lngths Coco- Lumber For Scaffolding (2"x3"x10ft) 10 Kls Cw Nails # 4" 10 Kls Cw Nails # 3" 15 Bags Masonry Cement 3 Cu.m Washed Sand 18 Lngths B.i Rectangular Tube (g40x 2"x 6"x 6m) 23 Lngths B.i Square Tube (g40x 2"x 2"x 6m) 5 Lngths Def.bar 10mm Diax 6m 38 Shts Polycarb.-solid (3mm X W=1.2m X L=1.0m) 9 Lngths Aluminum H-connector Joint X 5.80m 30 Pcs Cutting Disc # 4" 2 Pcs Grinding Disc # 4" 700 Pcs Textscrew # 2" 15 Tubes Sealant Clear 8 Kls Welding Rods 5 Gals Red Oxide Paint 10 Gals Qde (black) 2 Gals Flat Latex (white) 2 Gals Latex Color (ivory) 1 Gal Paint Thinner 1 Gal Lacquer Thinner 5 Pcs Baby Roller W/ Handle # 4" 5 Pcs Paint Brush 2" Construction Materials (for Rehabilitation Of Drainage Canal Of Rhu I Building At Población Balamban Cebu) Materials Only 60 Bags Portland Cement 6 Cu M W-sand 5 Cu M 3/4 Gravel 90 Lngths Corr. Def. Bar 10mm Dia. 100 Lngths Coco Lumber 2"x2"x10ft 150 Lngths Ordinary Pvc Pipe #2" 10 Shts Ordinary Ply-wood (1/2x 4x 8ft) 3 Kls Nylon String #90mm 15 Kls Cw-nails #4" 10 Kls Cw-nails #3" 2 Kls Cw Nails # 1 1/2" 40 Kls Gi Tie Wire #16 3 Pcs Cut Off Blade #14" 5 Pcs Hacksaw Blade 15 Pcs Construction Pail (balde X Big)

Details: Description Republic Of The Philippines Province Of Cebu Municipality Of Balamban Balamban, Cebu Tel. No: (032) 345-8220 Office Of The Bids And Awards Committee Invitation To Bid For Various Infrastructure Projects Of The Municipality (materials Only) 1. The Municipality Of Balamban, Through The Various Sources Of Funds, Intends To Apply The Sum Of One Million Nineteen Thousand Four Hundred Fifteen Pesos Only (₱ 1,019,415.00) Being The Total Approved Budget For The Contract (abc) To Payments Under The Contract Stated. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Project Source Of Funds Abc Construction Materials (for Replacement Of Electric Power Mayor’s Office – Other Infra Assets ₱ 526,410.00 At Municipal Park,poblacion Balamban Cebu) Materialsonly Continuing Approp. & Current Materials Only Construction Materials (for Rehabilitation Of Concrete Sef – Sb#1 – School Building ₱ 354,210.00 Canopy No.1 Imelda Marcos Building At Balamban Current Central Elementary School Poblacion Balamban Cebu) Materials Only Construction Materials (for Rehabilitation Of Mayor’s – Flood Control System ₱ 138,795.00 Drainage Canal Of Rhu I Building At Poblacion Continuing Balamban Cebu) Materials Only 2. The Municipality Of Balamban, Now Invites Bids For The Various Infrastructure Projects Of The Municipality. Delivery Of Goods Is Required 30 Days After The Issuance Of The Notice Of Award. Bidders Should Have Completed, Within 2 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Right Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Municipality Of Balamban And Inspect The Bidding Documents At The Address Given Below During 8:00 Am- 12:00 Am And 1:00 Pm- 5:00 Pm, Monday To Friday Only. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders November 20 - 27, 2024 From The Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (₱ 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 28, 2024. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On November 28, 2024 At 1:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. Each Bidder Shall Submit One (1) Certified Copy From The Original Copies Of The First And Second Components Of The Bid. Bidders Shall Enclose Their Original Eligibility And Technical Documents In One Sealed Envelope Marked “original-technical Component”, And The Original Of Their Financial Component In Another Sealed Envelope Marked “original- Financial Component”, Sealing Them All In An Outer Envelope Marked “original Bid”. 10. Each Copy Of The First And Second Envelopes Shall Be Similarly Sealed Duly Marking The Inner Envelopes As “copy 1- Technical Component” And “copy 1- Financial Component” And The Outer Envelope As “copy 1”, Respectively. These Envelopes Containing The Original And The Copy Shall Then Be Enclosed In One Single Envelope. All Envelopes Shall Contain The Name Of The Contract To Be Bid In Capital Letters; Bear The Name And Address Of The Bidder In Capital Letters; Be Addressed To The Procuring Entity’s Bac And; Bear A Warning “do Not Open Before…” The Date And Time For The Opening Of The Bids. Bidders Are Also Required To Provide Table Of Contents With Corresponding Tab/label For Each Submitted Technical And Financial Components Of Its Bid. 11. The Municipality Of Balamban Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jelyn K. Subang Bac Secretariat Bac Office, Market Operations Bldg.,/mbo Balamban, Cebu (032) 345-8220 Loc. 142 And 181 November 19, 2024 Adonis E. De Pio Bac Chairman Construction Materials (for Replacement Of Electric Power Into Solar Lights At Municipal Park, Balamban Cebu) Materials Only 80 Sets Solar Motion Lamp Post Light Ufo Style 400w With Bracket 25 Sets Outdoor Solar Flood Light 200w (separate Solar Panel) 15 Pcs Metal Cutting Disc 4" 2 Pcs Metal Cutting Disc 14" 15 Kg Welding Rod E6012 5 Pcs Grinding Stone4" 1 Lngths Gi 4" X 6m Sch 40(20ft) 5 Lngths 10mm X 6m Def. Bar 5 Lngths 12mm X 6m Def. Bar 5 Bags Portland Cement 0.5 Cu M Wash Sand 0.5 Cu M 3/4 Gravel 2 Shts 1/2 Phenolic Board 4'x8' 6 Lngths 2x2x10' Coco Lumber 1 Kg No.16 Tie Wire 1 Kg 4"cwn 1 Kg 1 1/2" Cwn 2 Pcs Construction Pail (big) 1 Gal Paint Thinner 3 Gals Quick Dry Enamel (black) 3 Pcs Baby Roller With Handle 4" 3 Pcs Paint Brush 2 1/2" 2 Pcs Paint Tray 400 Pcs Tox With Screw 10mm 400 Pcs Washer For Tox Woth Screw 10mm 360 Pcs Tox With Screw 12mm 10 Pcs Topgrade Drill Bit 5/16 Masonry Construction Materials (for Rehabilitation Of Concrete Canopy No.1 Imelda Marcos Building At Balamban Central Elementary School Poblacion Balamban Cebu) Materials Only 50 Lngths Coco- Lumber For Scaffolding (2"x3"x10ft) 10 Kls Cw Nails # 4" 10 Kls Cw Nails # 3" 15 Bags Masonry Cement 3 Cu.m Washed Sand 18 Lngths B.i Rectangular Tube (g40x 2"x 6"x 6m) 23 Lngths B.i Square Tube (g40x 2"x 2"x 6m) 5 Lngths Def.bar 10mm Diax 6m 38 Shts Polycarb.-solid (3mm X W=1.2m X L=1.0m) 9 Lngths Aluminum H-connector Joint X 5.80m 30 Pcs Cutting Disc # 4" 2 Pcs Grinding Disc # 4" 700 Pcs Textscrew # 2" 15 Tubes Sealant Clear 8 Kls Welding Rods 5 Gals Red Oxide Paint 10 Gals Qde (black) 2 Gals Flat Latex (white) 2 Gals Latex Color (ivory) 1 Gal Paint Thinner 1 Gal Lacquer Thinner 5 Pcs Baby Roller W/ Handle # 4" 5 Pcs Paint Brush 2" Construction Materials (for Rehabilitation Of Drainage Canal Of Rhu I Building At Población Balamban Cebu) Materials Only 60 Bags Portland Cement 6 Cu M W-sand 5 Cu M 3/4 Gravel 90 Lngths Corr. Def. Bar 10mm Dia. 100 Lngths Coco Lumber 2"x2"x10ft 150 Lngths Ordinary Pvc Pipe #2" 10 Shts Ordinary Ply-wood (1/2x 4x 8ft) 3 Kls Nylon String #90mm 15 Kls Cw-nails #4" 10 Kls Cw-nails #3" 2 Kls Cw Nails # 1 1/2" 40 Kls Gi Tie Wire #16 3 Pcs Cut Off Blade #14" 5 Pcs Hacksaw Blade 15 Pcs Construction Pail (balde X Big)

Details: Description Republic Of The Philippines Department Of Education Region Iva- Calabarzon Schools Division Office Of San Pedro City San Pedro City, Laguna Request For Quotation Date: November 21, 2024 Quotation No.: To All Eligible Suppliers: Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms And Conditions Of This Rfq, And Submit Your Quotation Duly Signed By Your Representative At Schools Division Office San Pedro City, San Pedro, Laguna Or Via Email Address Bac.sanpedro@deped.gov.ph Not Later Than November 25, 2024 . For More Information Please Call Bac Secretariat At Cellphone No. 09088181850. Prospective Supplier Shall Be Responsible To Verify The Quoted Items From Above-stated Agency And Contact Number. Paul Jeremy I. Aguja Bac Chairman Procurement Of Office Supplies For Different Units In Sdo San Pedro City Budget: Php 690,244.00 Item No./items & Description/qty/unit 1 2b Eraser 30pcs Pack White Eraser 2 Pack 2 Air Purifier Home Humidifier Oil Aromatherapy Aromatic Humidifier Household, 4l, White Transparent 3 Pc 3 Air Refreshener, Cologne Box For Car Long-lasting Car Deodorizer Solid Perfume, 230g/box, Lemon Scent 25 Pc 4 Ballpen , Blue, Flexstick, 12 Per Box 30 Box 5 Ballpen With Holder And String 50 Pc 6 Baygon Multi Insect Killer Spray 500 Ml 20 Pc 7 Bubble Dishwashing Liquid 1 Gallon 35 Gallon 8 Canon Scanner Dr-c255 Ii 2 Pc 9 Clearbook Long Size Makapal, 70 Microns, 2pieces Per Pack, Different Color 20 Pack 10 Cling Wrap Film, 18 Inches, 500 Meter 5 Pc 11 Clipboard, Black 30 Pc 12 Correction Tape Stationery Essential 6pcs/pack Mini Correction Tape Error 35 Pack 13 Daimaru Mosquito Killer Bt 2x10w Black 5 Pc 14 Disposable Latex Gloves, Contains Natural Rubber Latex, Powder Free, Non-sterile, Ambidextrous, Single Use Only, Medium Size, 100 Per Box 10 Box 15 Dragon Stainless Steel Hasp 4 Inch Staple Gate Door Shed Latch Lock Safety Lock Metal Padlock Hasp 30 Pc 16 Dust Pan Lata With Wood Handle 25 Pc 17 Dust Pan, Heavy Duty Modern Dustpan, Pandakot Kingplastic 25 Pc 18 Essence Oil For Humidifier, 1 Liter, Okada Scent 5 Bottle 19 Expandable Folder, Long (blue) 40 Pc 20 Expandable Folder, Long (orange) 40 Pc 21 Expandable Folder, Long (pink) 40 Pc 22 Expandable Folder, Long (purple) 40 Pc 23 Expandable Folder, Long (red) 40 Pc 24 Expandable Folder, Long (yellow) 40 Pc 25 Extension Wire Heavy Duty Extension Wire 10meters, Yellow 10 Pc 26 Femme Facial Tissue Largebox 2 Ply 250 Pulls 150 Box 27 File Divider A4, Multicolored , 50pcs Per Pack 20 Pack 28 Green Cross Gentle Protect, Alcohol, No-sting Sanitizer, From Tea Tree Oil & Aloe Vera Extract, Made With Natural Ingredients, Hypoallergenic, 250ml Set Of 3 30 Set 29 Hb Pencil 30pcs Log Lead-free Non-toxic Standard Writing With Eraser Hexagonal Pencils 20 Pack 30 Heavy Duty Double Burner Gas Stove Stainless Body With Gasul 1 Set 31 Hm Wires And Cables Storage Box Cable Box Power Strip Wire Case Charger Socket Organizer Storage Bin 3 Pc 32 Imarflex Coffee Maker 8-10 Cups Black, Icm-700s 2 Pc 33 Interfolder Paper Towel 200 Pc 34 Knife Set 6pcs Kitchen Knife Set Stainless Steel Chef Knives Cooking Knife Scissors With Acrylic 1 Set 35 Lifetime Foldable Tables, White, 6ft 20 Pc 36 Liquid Container Dispenser Soap Pump Press Bottle Transparent Sub Bottling 25 Pc 37 Modern Water Dispenser Home New Automatic Hot And Cold Lower Bucket Tea Bar Machine 1 Unit 38 New Rechargeable Battery, Double Aa 20 Cells/pack 1 Pc 39 New Rechargeable Battery, Double Aaa, 20cells/pack 1 Pc 40 Official Record Book, 8x11 Inches, 500 Pages 50 Pc 41 Padlock, 50mm, Heavy Duty 20 Pc 42 Plastic Clothes Brush, Brush With Handle, Multipurpose Brush With Handle, Laundry Brush 50 Pc 43 Rainbow Accordion File Folder 24 Slots Flip String Buckle Multi-layer Classification Document Organizer, White Color, 24 Layer, Long Size Model 10 Pc 44 Round Rags, 5x5, Retaso 2000 Pc 45 Scotch Brite Sponge Tough Clean Antibacterial Scrub 3 Pcs/vp 115mmx70mm 20 Pack 46 Specialty Paper (pale Cream) Long, 10 Pieces/pack 20 Pc 47 Specialty Paper (pale Cream) Short, 10 Pieces/pack 20 Pc 48 Spray Bottle For Alcohol, 500ml, Transparent Color, Ultra Fine Mist Sprayer, Hig Pressure Spray Bottle 30 Pc 49 Staple Remover (plier Type) 30 Set 50 Staple Wire 35mm 50 Pc 51 Suction Bold Fabulous Toilet Accessories Pipe High Pressure Sewer Drainage Facility Toilet Tools Block, Universal Joint Rotation Design 5 Pc 52 Tissue Roll Virgin Pulp, 48 Per Pack 50 Unit 53 Tumbler, 32 Oz 5 Pc 54 Universal Socket 25 Pc 55 Walis Tingting 55 Pc 56 White Long Mailing Envelope 2000 Pc 57 Whiteboard (plywood-sized) With Frame And Wheels 2 Pc 58 Zebra Label Printer Model Zt200 1 Pc 59 Toilet Flush Handle Fitting 10 Pc 60 Lavatory Drain Fitting 6 Pack 61 Led Bulb 9w 10 Pc 62 Vulca Seal Sachet 15 Pc 63 Silicon Sealant 15 Pc 64 Duct Tape 12 Pc 65 Electric Tape 15 Pc 66 Bidet 5 Pc 67 Plywood 1/4 4 Pc 68 Led Tube 18w 4ft 10 Pc 69 2 In 1 Combo Brad Nailer Ga18 1 Pc 70 "admiral Shredding Machine S-828 Features: • Auto Start And Stop • Auto Reverse Prevents Paper Jams • Thermal Overload Protection • Safety Cut-out On Bin Removal • Accepts Clips, Staples, Credit Cards And Cds With Caster Product Specification: Sheet Capacity (a4/80gsm): 9 Sheets Cute Size (mm): 3x25 Shred Speed (mpm): 3.5 Throat Width (mm): 220 Auto Feed/stop/rever: Yes Paper Jam Rever Key: Yes Thermal Overload Protection: Yes Safety Cut-out On Bin Removal: Yes Accept Paper Clips/staples/cards: Yes Accepts Cds: No Bin Capacity (liters): 20 Machine Size (mm): 350 X 262 X 550 Net Weight (kg): 14 Power (w): 180" 5 Unit 71 "dcp-t720dw, Ink Tank Printer Functions: Print, Scan, Copy Printer Type: Inkjet Printer Product Dimensions (width X Depth X Height) 435 Mm × 380 Mm × 195 Mm Weight: 8.7 Kg Print Speed: 17 (mono) / 9.5 (col) Ipm Fpot: 6 (mono) / 9.5 (col) Seconds Paper Type: Plain, Inkjet, Glossy(cast/resin), Recycled Paper Size: A4, Letter, Executive, A5, A6, Photo 4""x6"", Indexcard 5""x8"", Photo 5""x7"", C5 Envelope, Com-10, Dl Envelope, Monarch, Photo-3.5""x5"" Maximum Paper Capacity: Up To 150 Sheets Of 80 Gsm Plain Paper" 5 Unit

Details: Description Computer Supplies Ink Bottle, Brother Bt 5000 Magenta 4 Bottle ₱1,888.00 Ink Bottle, Brother Bt 5000 Cyan 4 Bottle ₱1,888.00 Ink Bottle, Brother Bt 5000 Yellow 4 Bottle ₱1,888.00 Ink Bottle, Brother Bt D60 Bk 4 Bottle ₱1,888.00 Ink Bottle, Epson L3150 Bk 4 Bottle ₱1,888.00 Ink Bottle, Epson L3150 Yellow 4 Bottle ₱1,888.00 Ink Bottle, Epson L3150 Magenta 4 Bottle ₱1,888.00 Ink Bottle, Epson L3150 Cyan 4 Bottle ₱1,888.00 Bluetooth Mouse With Scroll 4 Pcs ₱2,600.00 Flash Drive, 64 Gb Capacity 10 Piece ₱5,760.00 Electrical Supplies Battery Drycell Aa 2's 10 Pack ₱1,025.00 Baterry Drycell Aaa 2's 10 Pack ₱1,300.00 Tape, Electrical 50mm/roll/big 5 Roll ₱240.00 Tape, Masking , Witdth 24mm 5 Roll ₱320.00 Tape, Packaging , Witdth 48mm 5 Roll ₱120.00 Led Light Bulb 13 Watts 16 Pcs ₱5,264.00 Led Light Bulb 13 Watts 16 Pcs ₱7,376.00 Padlock, Heavy Duty Medium 10 Piece ₱2,873.00 Extension, Universal, 5 Gang, Hd W/ Switch 1 Pcs ₱883.50 Circuit Breaker 100amp 2 Pcs ₱4,726.80 Janitorial Supplies Chlorox(zonrox), 1892 Ml. Original 10 Gallon ₱1,650.00 Chlorox(zonrox), 900 Ml. Purple 20 Bottle ₱2,820.00 Detergent Bar 380g/bar Tide 10 Bar ₱440.00 Detergent Powder,1kg 20 Pack ₱1,540.00 Fire Extinguisher, Dry Chemical, 4.5 Kgs 6 Unit ₱14,016.60 Dishwashing Liquid, 750 Ml (yellow) 8 Bottle ₱1,360.00 Dishwashing Paste, Axion Lime Or Equal Brand 350g 8 Pcs ₱624.00 Disinfectant Spray, Lysol Or Equal Brand 170 Ml (red) 12 Bottle ₱4,788.00 Disinfectant Spray, Lysol Or Equal Brand 170 Ml (white) 12 Bottle ₱4,356.00 Door Knob, Heavy Duty 2 Piece ₱1,526.00 Doormat (cotton,lala,-rectangle) 10 Piece ₱770.00 Facial Tissue 2 Ply, 130 Pull Ups 30 Box ₱3,783.00 Garbage Bag, Plastic, Black, Large, 100's 10 Pack ₱3,550.00 Garbage Bag, Plastic, Black, Medium, 100's 8 Pack ₱1,664.00 Garbage Bag, Plastic, Green, Large 100's 8 Pack ₱3,320.00 Sando Bag, Xl (green), 50s 10 Pack ₱980.00 Sando Bag, Xl (yellow),50s 10 Pack ₱980.00 Sando Bag, Xl (black),50s 10 Pack ₱980.00 Sando Bag, Xl (white/transparent),50s 20 Pack ₱1,960.00 Toilet Bowl Brush W/handle 5 Piece ₱860.00 Garbage Bag, Yellow, Plastic, Large, 100's 8 Pack ₱3,320.00 Glass Cleaner 500 Ml With Spray 4 Bottle ₱1,040.00 Gloves, Rubber, Black 4 Pair ₱844.00 Anti Bacterial Hand Soap Refreshing Mositurizer, 500ml 5 Btl ₱605.00 Hand Sanitizer, 500 Ml 8 Bottle ₱2,760.00 Insecticide Spray (baygon)500 Ml Or Equal Brand 6 Can ₱2,172.00 Pail, Plastic, Medium, Ordinary 2 Piece ₱330.00 Garbage Bag Xl (green), 50's 8 Pack ₱1,720.00 Garbage Bag Xl (yellow), 50's 10 Pack ₱2,150.00 Steel Wool, Heavy Duty 10 Pack ₱1,790.00 Scouring Pad 3's (scotch Brite) Or Equal Brand 4 Piece ₱688.00 Toilet Pump, Rubber 10 Pack ₱2,760.00 Tornado Mop 360", W/ Microfiber 2 Mop Heads 1 Piece ₱1,331.00 Trash Can W/ Cover (medium Size), Plastic 4 Piece ₱1,512.00 Diswashing Liquid ,750ml (green) 10 Btl ₱1,760.00 Dust Pan (folding) 4 Bottle ₱972.00 Broom, Soft (tambo) 10 Piece ₱2,420.00 Alcohol, 70% Isoprophyl, 500ml 30 Bottle ₱3,549.00 Extendable Duster 5 Pcs ₱1,579.50 Detergent Bar 380g/bar Tide 10 Bar ₱572.00 Fork Shovel 2 Pcs ₱2,834.00 Furniture Cleaner, Aerosol Type, 300ml 6 Can/s ₱1,224.00 Rainboot, Assorted Size 5 Pair/s ₱4,435.00 Biogrow Odor Eliminator 4 Unit ₱11,032.00 Office Supplies Correction Tape, 8m 10 Piece ₱550.00 Clearbook, 20 Transparent Pocket, Legal 2 Pcs ₱132.00 Marking Pen , Permanent, Black Fine Pilot Or Equal Brand 2 Piece ₱156.00 Fastener, Plastic Coated, 8 1/2' Short 100's 6 Box ₱816.00 Folder Sliding ( Morocco,long,green) 6 Piece ₱126.00 Folder, Expanding, For Legal Documents, Pressboard, Green 20 Piece ₱620.00 Marking Pen,white Board Black, 17g 3 Piece ₱374.40 Marking Pen,white Board, Black, Fine Pilot Or Equal Brand 1 Piece ₱91.50 Marking Pen , Permanent, Black Fine Pilot Or Equal Brand 8 Piece ₱624.00 Marking Pen , Permanent, Blue Fine Pilot Or Equal Brand 2 Piece ₱156.00 Marking Pen , Permanent, Red Fine Pilot Or Equal Brand 8 Piece ₱552.00 Pad Paper (ruled, Yellow, 80 Leaves) 2 Pad ₱84.00 Paper Clip, Bulldog 3', Large, 12s 2 Box ₱506.00 Paper Clip, Bulldog 1", Small, 12s 2 Box ₱108.00 Calculator, Big Keys, 12 Digits, Dual Power 8 Piece ₱13,603.20 Paper, Multicopy, 80 Gsm, Short Size 500 Sheets 5 Ream ₱1,685.00 Paper, Multicopy, 70 Gsm, A4 Size 500 Sheets 5 Ream ₱1,540.00 Puncher Hd 5 Pcs ₱1,633.00 Pen, Ballpoint (pilot), Black, Fine,pilot Or Equal Brand 50 Piece ₱2,050.00 Pen, Ballpoint (pilot) Blue, Fine,pilot Or Equal Brand 50 Piece ₱2,050.00 Pen, Ballpoint (pilot), Red, Fine,pilot Or Equal Brand 50 Piece ₱2,050.00 Pencil Lead W/ Eraser, Wood Cased #1 12's 3 Box ₱399.00 Note Pad, 2"x3" Stick On, 72gsm, 100s 5 Pad ₱370.00 Scissor 6" 2 Pcs ₱210.50 Staple Wire Guntucker Hd , 8mm, 5000pcs 3 Box ₱711.00 Staple Wire #35 X 5000 Pcs 10 Box ₱810.00 Stapler #35 Heavy Duty With Remover 2 Piece ₱1,004.00 Tape, Packaging , Witdth 48mm 5 Roll ₱250.00 Tape, Double Sided, 1", 50m (3m) 4 Roll ₱304.00 Tape, Transparent, 1/2, 50m 20 Roll ₱1,140.00 Tape, Transparent, 1", 50m 20 Roll ₱1,660.00 Sign Pen Gel 1.0 M7g Or Equal Brand, Black 40 Piece ₱1,800.00 Cartolina, Assorted Colors 12 Bndle ₱1,128.00 Glue, All Pupose,gw;200gms 5 Jar ₱470.00 Record Book,500 Pages 7 Book ₱1,540.00 Record Book, 300 Pages 7 Book ₱1,001.00 Push Pin, 100pcs, 45g 3 Box ₱117.00 Tape Dispenser 1" Width 4 Pack/s ₱1,690.00 Folder Expanding , Green, Legal Size 19 Piece ₱589.00 Folder Expanding , Green, Short Size 20 Piece ₱600.00 Paper Sricker, A4 Size 10's Matte, 160gsm 3 Pack/s ₱165.00 Paper Sricker, A4 Size 10's Glossy, 160gsm 2 Pack/s ₱122.00 Paper Photo, 180gsm, A4 Size, Premuim Wove, 20's 2 Pack/s ₱630.00 Pencil Sharpener 1 Piece ₱400.50 Clip, Backfold, All Metal, Clamping 19mm 5 Box ₱143.00 Clip, Backfold, All Metal, Clamping 32mm 5 Box ₱279.50

Description: Contract notice – general guideline, standard regulation, open procedure (services) Procurement of DL for IT services and IT services from Hessenforst in 16 lots IT services in the IT environment of Hessenforst. Services in the areas of IT services, IT services and in ... Additional procurement of DL for IT services and IT services from Hessenforst in 16 lots IT services in the IT environment of Hessenforst. Services in the areas of IT services, IT services and in IT specialist applications, each divided into 16 specialist lots. Services in the IT service data center and in the IT services virtualization, network and operating systems Services in the IT service data center and in the IT services virtualization, network and operating systems The IT service data center provides Hessenforst users with applications centrally and primarily uses the virtualization, network and operating systems services for this purpose. The service must be continually developed and, as a basic IT service, must provide interfaces to all other IT services. The IT service therefore requires high levels of advisory expertise at a strategic level in order to further develop the service, as well as high levels of communication skills to coordinate all IT employees who use the service, who are responsible for an application or a server, for example. The virtualization service offers - the operation of virtual machines on a hypervisor basis, - desktops and apps currently virtualized on Citrix Xenapp 7.15 Ltsr under Windows Server 2016 and, which is being phased out, Windows Server 2008 R2, as well as - profile virtualization based on VMware User Environment Management 9.x and - another virtual data center location in the Microsoft Azure cloud, which must be administered and, if necessary, expanded. The network service ensures - the provision of WAN connections for currently 49 locations on an MPLS basis via a framework agreement with the HZD and LAN connections for the connection to the network of the state of Hesse and thus access to the central data center, - the provision of IP addresses for the servers, clients and printers (with the help of DHCP) and their overview via IP address management (IPAM), - the connection of around 400 individual locations with different contractual partners outside the HZD framework agreements and - the provision of VPN client software for external service providers, - the application for firewall changes via the HZD change management and - the maintenance of the active network components in the CMDB. The operating systems service ensures - the implementation of platform developments based on new operating systems (currently Windows 10 and Windows Server 2016), - the usability of HZD services such as Active Directory and DNS (configuration and administration of user and client objects, applications, currently self-created group policies, maintaining close contact with HZD as the operator of the base). The following services are to be provided for the IT data center IT service: - advice, project management and implementation of tasks related to the basic structure, operation and technical development of the Hessenforst data center and its interfaces to the Hessian Central Office for Data Processing (HZD). Requirements for mobile applications as well as the basic specifications and developments of the state of Hesse and its central service providers, in particular the Hessian Central Office for Data Processing (HZD), must be taken into account. The following services are to be provided for the IT service virtualization: consulting, project management and implementation of tasks in the area of virtualization or its further development. The following services are to be provided for the IT service network: consulting, project management and implementation of tasks in the area of networks or its further development. The following services are to be provided for the IT service operating systems: consulting, project management and implementation of tasks in the area of operating systems or its further development Services in IT service, IT workplace service and IT service IT workplace hardware The IT service includes the provision of technical workplace equipment, as well as the associated services such as installation, user support and troubleshooting, as well as the further development of IT workplace equipment at Hessenforst. This includes all end devices operated by Hessenforst, Hessenpc and telephony operated by HZD. There are currently around 1,800 IT workstations in operation at - 39 forestry offices, - 2 Hessenforst Technik locations, - 2 state operations management locations, - around 500 individual locations (districts, teleworking locations) and - the Kellerwald-Edersee National Park (here as an IT service provider for the national park). The IT service includes the provision of technical workplace equipment, as well as the associated services such as installation, user support and troubleshooting. All projects involving the introduction of new hardware such as mobile devices and the standard of the state of Hesse are supported by the service. The IT service Workplace Hardware supplies Hessenforst employees with installed terminal hardware in the following classes: PC, notebook, printer, multifunction device, mobile phone/smartphone, tablet, telephone (Hessenvoice), each including accessories (monitors, keyboards, mice, cables, docking stations, batteries, SIM cards). With regard to the device classes mentioned, it is responsible for controlling/implementing the logistics associated with device supply, such as warehousing, installation using software distribution, rollout and support in procuring devices, keeping spare parts, handling repairs and warranty cases by third parties. Service employees maintain the affected CIS in the Cmdb and, as user support employees, provide support in both the incident management process and request fulfillment. The service also develops standard hardware equipment for specific user roles/tasks and develops standard procedures for creating and delivering this equipment, and defines associated standard changes. The service develops and implements standard processes for troubleshooting and error correction on components for which the service is responsible. The following services are to be provided for the IT service IT workplace service: - Advice and project management for tasks related to the provision of IT workplaces at Hessenforst. Requirements for mobile applications as well as the basic specifications and developments of the state of Hesse and its central service providers, in particular the Hessian Central Office for Data Processing (HZD), must be taken into account. The following services are to be provided for the IT service IT workstation hardware: - Services in connection with the provision of IT workstations Services in the IT service GIS The IT service ensures the provision and processing of geoinformation via IT specialist applications in the state-owned company Hessenforst. So that the IT service can meet the requirements of the company, various technical services provide different tools and processes, including the IT services Forestry GIS, Operational GIS, Mobile GIS, Portal and GIS Server Infrastructure and SDE, Geodata & Processes. The following services are to be provided for the IT service GIS: - Advice on fundamental, strategic and technical issues relating to the IT service GIS. The advice is independent of the existing (and future) contracts for the development and further development of the IT services ForestryGIS and the operational GIS (BGIS), as these contracts serve to support and drive development within the IT services. In order to plan a neutral strategic orientation in the service or to accompany current developments with the necessary measures at the service level, the advice must take place outside of the above-mentioned contracts and, above all, be manufacturer-independent. Services in the IT service Portal for ArcGIS and GIS server infrastructure The IT service ensures the provision and processing of geoinformation via IT specialist applications in the state-owned company Hessenforst. Various technical services provide different tools and processes so that the IT service can meet the requirements of the company. The portal for ArcGIS is a central component of ArcGIS Enterprise. In particular, the introduction of a mobile GIS and corresponding offline applications has made it a central part of the GIS infrastructure at Hessenforst. The portal for ArcGIS has been made available in the Hessenforst data center in the production, development and integration environments. Mobile applications based on the product Weblinemobile, the Esri standard apps and also the operational GIS are developed using the portal for ArcGIS or are then migrated. On the basis of an architecture and operating concept, the portal for ArcGIS must be operated, expanded, monitored, maintained and kept up to date. The requirements therefore include the operational operation, architecture and administration of the portal. The development of processes for automation in the environment of the portal under the ArcGIS API for Python should be given high priority in order to support the implementation of recurring requirements for administration and operation. The following services are to be provided: - Administration, monitoring and operation of the portal for ArcGIS - Development of processes for automation in the portal environment under ArcGIS API for Python Services in the IT service Forst-GIS The IT service ensures the provision and processing of geoinformation in the state-owned company Hessenforst. The "ForstGIS" service essentially supports the GIS and forestry management services. The service provides users with systems and software for maintaining basic spatial data and generating maps as part of forestry management. The service has interfaces to other services such as database management and the Arcsde service for geodata management. The aim of the ForstGIS service is to enable end users to maintain geodata at Hessen-Forst. The users who use the products and systems provided by the ForstGIS include the Forestry Geoinformation department (an organizational unit of the state management) with the subject areas of GIS data management and GIS analysis as well as forest management planning and the internal and external foresters. The service is used to design, develop and provide Hessenforst's own geoprocessing tools, the so-called Hessentools, to support the workflows. The basis is the ESRI software Arcmap and ArcGIS Pro. The data is stored in an ESRI SDE under Oracle. Cross-state data model with the associated geoprocessing tools via the product Fobis. The product "prosuite" from ESRI CH, in the future from Dira Geosystems, is used to ensure quality when maintaining geometry data. Map series are currently still configured and output using the Map Toolset (KTS) product. The interface software FME is used for mass processing and further geo-processing. The ticket system is the software "echolon". The following services are to be provided: - Support for adjustments as a result of technical and specialist changes - Development of test scenarios and implementation of tests as part of change and release management - Second level support for users with regard to the software provided, the functions and the processes as part of incident management Services in the IT services Mobile GIS and mobile wood recording GIS facts and maps that are important for the state forestry company and its employees and that can provide answers that support decision-making are made available to the user via the Hessenforst app MGIS / MGIS HF Offline. This is not a web application, but a native iOS app for iPhone and iPad. In addition to providing information for the field service, recordings and changes for the central procedures are made via specific specialist applications. Data is exchanged bidirectionally in both directions, centrally to the central databases and locally to mobile iOS devices (iPhone and iPad). The Mgis app currently provides 7 specialist applications, such as traffic safety, with a variety of topics. The system landscape consists of 3 environments each: a development environment, an integration and test environment, and the production environment. In addition to the purely location-related applications, the first application that is primarily focused on factual information has been added: wood recording and pile location. The technological basis of the Mgis/Mgis HF app for iOS is the Weblinemobile app from Intend Geoinformatik, which has been adapted for Hessenforst and is used via Arcgis Enterprise and the Arcgis portal. The development environment is Arcgis Runtime V100.x. The app is made available to employees via the Enterprise Appstore of the Hessenzentrale für Datenverarbeitung (HZD) and is authorized via Active Directory. The bidirectional connection to the portal for ArcGIS and the backend infrastructure with the databases is established via a special VPN application. MGIS was developed as a native offline app with an actively initiated synchronization, since a secure Internet connection is generally not possible in the forest. Developments on the app are carried out by the developer company. The applications are created, adapted and made available in the portal for ArcGIS. Users can then download the applications from there to their mobile devices depending on their authorization. The configuration of an application and the associated web services is carried out via ArcGIS Pro as well as a metadata schema in the portal for ArcGIS and a database-supported configuration framework, which enables a high degree of automation to be achieved. The following services are to be provided: - Ensuring the technical operability of the system environment, the applications and their configurations - Configuration, creation and adaptation of the required services - Participation in all further developments and the tests carried out for this - Development of test scenarios - Ensuring second level support for all applications IT services Operational GIS Operational GIS is the central web-based information and recording system for all GIS issues that are important for the state forestry operation and its employees and that can provide answers that support decision-making. Currently, more than 150 topics are provided via system maps, individual topics or topic groups. In addition to central state-wide topics, users have the option of creating their own maps or overview maps, adding their own content to them and making them available to others. The system landscape consists of 3 environments each: a development environment, an integration and test environment and the production environment. One focus of the work is on providing new themes and adapting and expanding existing themes within the web application using a configuration tool specifically developed for this purpose. Another focus is on creating, adapting and monitoring the web services required for the web application via ArcGIS Enterprise with the Portals for Ar-cgis and the ArcGIS Server. There is close cooperation with the Portal and Server Infrastructure service. The data required for the maps and themes is kept in an Oracle database and entered into the database or updated via the IT service SDE Geodata&processes. This also applies to data model changes that arise as a result of new or changed themes. The operational GIS in its current expansion stage is a customized web GIS application via the Webline product from Intend Geoinformatik, which was developed on the basis of the ESRI Java Script API 3.x and can be run in all common browsers. As a rule, little or nothing is programmed independently; instead, it is configured (configurator). The GIS web services are configured using the Esri Arcmap software, and the applications themselves are configured using the Webline-specific configurator. HTML and CSS are used to design forms, and JavaScript code is embedded in the HTML code if required. The database contents are accessed using the Esri ArcGIS Arcmap software, the FME interface software, or using Oracle SQL Developer and SQL. The plan is to replace the current operational GIS based on the Webline product and Java Script 3.x by the end of 2025. As of today, the plan is to provide a new application using the Esri Java Script API 4.x. Mobile GIS and operational GIS are closely linked. The aim is to establish an even closer connection via the ArcGIS portal and to combine and use configurations for the two IT services, operational and mobile GIS. The aim is to use standardized interfaces in order to be able to offer more consistent processes for the different GIS and non-GIS procedures without any interruptions. The ticket system is the "echolon" software. The following services are to be provided: -Ensuring the technical operability of the system environment, the applications and their configurations -Configuration, creation and adaptation of the required services -Participation in all further developments and the tests carried out for this -Development of test scenarios -Second level support for users with regard to the software provided, the functions and the processes within the framework of incident management Services in the IT service SDE, geodata & processes The SDE, geodata & processes service plays a central role in the GIS and IT technical provision service as well as the handling and processing of geoinformation and serves all GIS IT services directly in the performance of their tasks. In addition to a specific administrative role, the service includes the roles of geodata and process management. The service ensures access to spatial data in the geodatabases. The data is kept in an ESRI SDE and ST_geometry in the Oracle databases. The data models required for the respective IT services and their application must be developed, created, adapted to changed requirements and access to the data must be regulated using granular authorizations. The service is responsible for the contents of the geodatabases and for ensuring that they are up-to-date, of high quality, of performance and of functionality. To ensure this, in addition to ESRI standard tools and methods, the FME interface software from Safesoft as well as database jobs, database procedures and database triggers are developed and used. The provision of new and updated data as well as quality-assured data is a central component of the service portfolio. This is supported by automated process, maintenance and job chains. Regular monitoring of these as well as checking and analyzing the output logs is a central component of the service's tasks. In addition to the administrative and operational activities for the company's own service, it is also necessary to support the other GIS IT services and to accompany the implementation of test and quality assurance work that is carried out as part of change and release management. As part of requirements management and application development, advice and support is provided, particularly for the IT service GIS and the GIS services. Troubleshooting in 2nd and 3rd level support as well as the support or takeover of defined work packages in projects is part of the tasks to be performed. The following services are to be provided: - Ensuring the technical operability of the system environment for the applications of the GIS IT services - Geodata management and provision of new and updated as well as quality-assured data in the central Oracle database and an ESRI SDE - Configuration and creation and adaptation of the required processes, job chains and procedures - Data modelling and rights management - Testing and analysis of the output logs - Participation in all further developments and the tests to be carried out for this - Development of test scenarios - Second level support for users with regard to the software provided, the functions and the processes within the framework of incident management Services for Gupta Team Developer (incl. Building Blocks) and C#.net/Visual Basic.net The IT services described in the service description provide various forestry specialist applications that are currently available with Gupta Team Developer and the Class library building blocks are developed. In detail, these are: - Timber recording and marketing (HEV), - Procurement of forestry services (BFD), - Forestry facilities (and natural inspection), - Integrated time and quantity recording, natural data recording (IZME/NDE), - The hunting program, - Parcel management, - Bark damage survey (SSE), - Measures management and - Personnel management. The data storage of these specialist applications is based on a relational data model in a central Oracle database. Therefore, good SQL and PL/SQL knowledge is a basic requirement for the (further) development of these specialist applications. The Eldatsmart data exchange format is also used and further developed for data exchange with other market participants in the area of raw timber marketing. Services for development, programming, troubleshooting and error correction are required for the OG forestry specialist applications. Development is understood to mean the development of one or more technical solutions in order to solve a problem or task. Programming is understood to mean the technical implementation of the solution developed. It is planned to port all applications on the technological basis of Gupta to C#.net. The porting is expected to be completed in 2026, so that after that no more services for Gupta development and programming will be requested. Services for application development and maintenance in C#.net after porting from Gupta Team Developer The IT services described in the service description provide various specialist forestry applications that were developed with Gupta Team Developer and the Building Blocks class library and then transferred to C#.net as part of a porting project. In detail, these are: - Timber recording and marketing (HEV), - Procurement of forestry services (BFD), - Forestry establishment (and natural inspection), - Integrated time and quantity recording, natural data recording (IZME/NDE), - The hunting program, - Parcel management, - Bark damage survey (SSE), - Measures management and - Personnel management. The data storage of these specialist applications is based on a relational data model in a central Oracle database. Therefore, good SQL and PL/SQL knowledge is a basic requirement for the (further) development of these specialist applications. Since the specialist applications were originally written in Gupta Team Developer and ported to C#.NET in 2025, good experience in Gupta Team Developer and the Building Blocks class library is an advantage. The Eldatsmart data exchange format is also used and further developed for data exchange with other market participants in the area of raw wood marketing. It is planned to port all applications based on Gupta technology to C#.net. The porting is expected to be completed in 2026, so that services from this lot will only be called up after the porting. With the porting, the previous reports based on Gupta Reports must also be ported to a new reporting platform. For the OG forestry specialist applications, services for the development, programming, troubleshooting and error correction of the applications and reports are required. Development means the development of one or more technical solutions in order to solve a problem or task. Programming means the technical implementation of the solution developed. Services in the Oracle Apex environment Currently, 4 applications are productive using Oracle Apex (wood location, operational sampling, cultivated area evaluation and reorganization). Further applications are planned. For these applications and for possible new applications, services for consulting, development, programming, troubleshooting and error correction are required. Services in the SAP BW environment Based on the SAP BW system of the state of Hesse, the applications economic planning, control (wiplus), BFD reports and sales planning have been developed in one portal. Wiplus supports the economic planning of the forestry operations it supports and the natural planning in the state forest. The implementation of the planning is supported by execution data that is maintained in Wiplus (control) and evaluated in the form of plan-actual reports. Plan-actual reports are possible at the district, forestry office and state management levels. Sales planning is a separate application in the portal that accesses the economic planning data. Sales planning bundles planning quantities in preparation for sales negotiations and provides needs-based functions for data maintenance, entry and evaluation. The BFD reports application enables evaluations of award data from the company's own specialist procedure for the procurement of forestry services (BFD for short). Evaluations are offered as design studio reports and SAP BO Analysis for Excel reports. For these applications, services for consulting, (further) development, troubleshooting and 3rd level support are relevant. The applications are hosted at the Hess. Competence Center (HCC) on a SAP BW platform. The HCC operates and partially develops these applications. One order for support, consulting, small developments/bug fixing, etc. is planned each year, as well as, if necessary, one order as part of an IT project for (further) development. Services in the IT service Birt The IT services described in the service description provide various specialist forestry applications, some of which provide reports based on Birt Reporting. For the further development and maintenance of these reports, services for programming, troubleshooting and error correction are required. Services in the IT services mass storage, server and backup/disaster recovery For the IT services mass storage, server and backup/disaster recovery, services for consulting and carrying out tasks in these services are relevant. Mass storage The service provides disk space based on storage systems operated by Hessenforst and rented storage (hzd). Hessenforst operates 4 systems from the manufacturer Dellemc. Two systems are located in the ARZ Mainz, two more in Giessen. Block-oriented volumes are used for VMware data storage as well as file server services with NFS and CIFS/SMB. Mass storage is also used as a backup target (Veeam, snapshots). Hessenforst operates QNAP systems for file transfer and backup. Every backend system required by any software used is mapped as a virtual machine via VMware VSphere on mass storage systems. Every application required by users stores data on the mass storage systems. All user drives (e.g. F:\, G:\, U:\) are located on Hessenforst mass storage. The service provides the following functions: File services: File services for both Microsoft-oriented systems (CIFs/SMB) and Linux-based systems (NFS). When providing the Birt & databases (Oracle) services, a protocol conversion takes place between the two worlds. VMware data storage: Data storage is made available for the VMware hypervisor. This takes place via the Fibrechannel (Giessen) and ISCSI (ARZ Mainz) protocols. Server/hardware The service provides virtual or bare-metal compute and RAM resources based on X64 systems. Hessenforst operates both physical and virtualized servers. The majority of the systems are located in ARZ Mainz and Giessen. There are also servers in every forestry office, in the Forestry Training Center (FBZ) Weilburg and in facilities of the Kellerwald-Edersee National Park (NPA). Each backend system either runs directly on a server (bare.metal) or receives a virtual environment via VMware. The service provides the following functions: Compute: CPU resources for operating systems or hypervisors. RAM: Memory resources for operating systems or hypervisors. Local mass storage: In the case of servers not operated in clusters (e.g. NPA & Forestry Office ESX hosts as well as bare-metal servers (admin server) Backup/disaster recovery This service offers all other services the option of backing up data and restoring all necessary files. Both file-based and server/client-based data backup solutions are offered. In addition, the DR case is considered and appropriate precautionary measures are taken (RTO/RPO). The core functionality of the IT service "Backup and Disaster Recovery (B&R)" is the backup of all operationally relevant files and virtual machines in order to be able to offer appropriate recovery options according to defined SLAs in the event of a service/emergency. The focus here is on the productive areas of Hessen-Forst. In addition, precautionary measures are taken to be able to make the relevant systems and files available again in the event of an emergency. The IT service "Backup and Disaster Recovery" offers, as a basic service of the infrastructure, The ability to back up all relevant systems that cannot be restored within a defined time frame as part of an automated software distribution and to make them available again in the event of a failure. In addition, file storage is backed up using mass storage mechanisms and data is replicated asynchronously from Mainz to Gießen. Services in the IT service Software distribution Hessenforst operates its own software distribution based on Ivanti DSM 2022.2, via which the Windows end devices in-house and virtual machines are automatically installed and maintained. The majority of the workstation computers are installed and maintained by the HZD as Hessenpc. The main tasks are: - Packaging for Citrix terminal servers - Packaging for servers - Integration of new server operating systems - Patch management for Windows and third-party manufacturers (e.g. Adobe, Firefox, and other special software in use) - Support of release management - Automation, e.g. scripting using e.g. PowerShell The framework contract partners are sent a requirements profile for the award of individual orders. Services in the IT service Monitoring For monitoring the IT infrastructure, Scom (Microsoft System Center Operations Manager) is used at Hessenforst. The following are monitored - Hypervisor (VMware ESX Server with Veeam Management Pack) - Virtual machines under Windows Server 2008-2016 - Virtual machines under Linux distributions - Hardware servers - WAN routes - Switches - Air conditioning systems Newly added systems must be included in the monitoring in coordination with the system manager and threshold values must be identified and sensibly configured. The existing infrastructure must be kept up to date with the latest technology through updates and patches.

Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Municipality Of Gutalac Bids And Awards Committee Invitation To Apply For Eligibility And To Bid The Municipality Of Gutalac, Zamboanga Del Norte Invites Contractors/suppliers To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Project: Solicitation Number : Infra 2024-378 Project : Proposed Construction Of Water System Location: Market Site, Barangay Salvador, Gutalac, Zamboanga Del Norte Requesting Office/end User : Engineering Office/mayor’s Office Approved Budget For The Contract (abc) : Php 12,800,000.00 Project Description: 21,000 Liters Tank With 9 Meters Stand, Supply 5hp Submersible Pump From Drilled Ground Water Source Scope Of Work: Item No Description Unit Quantity A.1.1(a) Provision Of Field Office For The Engineer (rental Basis) Months 5.00 B.3 Permits And Clearances Ls. 1.00 B.5 Project Billboard/ Sign Board Ea. 1.00 B.7(2) Occupational Safety And Health Program Lot 1.00 B.11 Provision Sum (10 Kva Generator Including Manual Transfer Switch) Ls. 1.00 B.20 Power House Enclosures (fencing, Protective Walkways And Security Ls. 1.00 803(1)a Structure Excavation (common Soil) Cu.m 78.00 804(1)a Embankment From Structural Excavation Cu.m 80.00 804(4) Gravel Fill Cu.m 5.00 1600(2) Pipe Line Trench Excavation And Installation Of Pipe Lin.m 1,242.00 1705(1) Fill And Backfill Cu.m 136.20 900(1)c2 Structural Concrete For Pump House (class A, 28 Days) Cu.m 23.88 900(1)c4 Structural Concrete For Tapstand (class , 28 Days) Unit 10.00 903(2) Forms And Falseworks Sq.m 23.88 1021(1)a Plain Cement Floor Finish Sq.m 23.88 1027(1) Cement Plaster Finish Sq.m 730.00 1003(1)e1 Ceiling Board On Metal Frame Ceiling Sq.m 23.88 1046(2)a2 100mm Chb Non-load Bearing (including Reinforcing Steel) 1010(4) Wooden Door And Windows Set 3.00 1034(1)b Colored Roofing (rib Type Colored Sheet Roofing) Sq.m 43.75 1047(1) Structural Steel Works Ls. 1.00 1201(1) Water Pumping System Ls. 1.00 1001(9) Storm Drainage And Downspout Ls. 1.00 1100(10) Conduit, Boxes, And Fittings (conduit Works/ Conduit Drop-in) Ls. 1.00 1101(33) Wires And Wiring Devices Ls. 1.00 1102(1) Panel Board W/ Main & Branch Breaker Ls. 1.00 1103(1) Lighting Fixtures And Lamps Ls. 1.00 Bidders Should Possess The Following List Of Requirements Below: 1. Certified True Copy Of Certificate Of Philgeps Registration (platinum); 2. Statement Of All Ongoing Government And Private Contracts; 3. Statement Of Slcc; 4. Pcab License If Infra; 5. Nfcc Computation Or Committed Line Of Credit; 6. Jva Or The Duly Notarized Statement In Accordance With Section 23.1(b) Of This Irr, If Applicable; 7. Bid Security In Prescribed Form, Amount And Validity Period; 8. Technical Specifications, Which May Include Production/delivery Schedule, Man Power Requirement, And/or After-sales Service/parts If Applicable; 9. Omnibus Sworn Statement In Accordance With Section 25.3 Of This Irr; 10. Certified True Copy Of Securities And Exchange Commission (sec) Registration Of Department Of Trade And Industry (dti) Registration; 11. Certified True Copy Of Valid Tax Clearance Per Executive Order No. 398, Series Of 2005, As Finally Reviewed And Approved By The Bir; -over- 12. The Prospective Bidder's Audited Financial Statements, Showing, Among Others, The Prospective Bidders Total And Current Assets And Liabilities, Stamped "received" By The Bir Or It's Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier That Two (2) Years From The Date Of Bid Submission; Schedule Of Bac Activities Are As Shown Below: • Posting Date November 16 – December 9, 2024 • Non-refundable Fee - Php 10,240.00 • Pre-bid Conference – November 22,2024 • Submission And Opening Of Bids: December 9, 2024 @ 9:00 Am This Bidding Shall Be Governed By The Implementing Rules And Regulations Of Republic Act No. 9184, Otherwise Known As The “government Procurement Reform Act.” The Municipality Of Gutalac, Zamboanga Del Norte Reserves The Right To Reject Any Or All Bids, Waive Any Minor Informalities In The Bids, Receive And Award The Contract To The Substantially Responsive Bidder/s Whose Bid Proposals Is/are Advantageous To The Government. Engr. Rolando B. Ortiz Bac Chairman

Details: Description Item No. Item & Description Quantity Unit Concrete & Masonry Works 1 Portland Cement Type 1 213 Bags 2 Washed Sand 21 Cu.m 3 Gravel 3/4" 13 Cu.m 4 16mm X 6.0m Rsb (grade 40) 88 Pcs 5 10mm X 6.0m Rsb (grade 33) 230 Pcs 6 12mm X 6.0m Rsb (grade 33) 73 Pcs 7 #16tie Wire 52 Kls 8 Chb 4" 1528 Pcs 9 0.15m Thk X 0.20m X 0.30m Concrete Louver Blocks 8 Pcs 10 Coco Lumber 2" X 2" X 10' 40 Pcs 11 Coco Lumber 2" X 3" X 10' 40 Pcs 12 Cw Nails 4" 6 Kls 13 Cw Nails 2 1/2" 4 Kls 14 Cw Nails 1" 2 Kls 15 Nylon String 2 Rolls 16 1/2" X 4" X 8" Marine Plywood 8 Pcs 17 Bamboo Poles 60 Pcs 18 Plastic Binders 3 Rolls Steel Works And Roofing Works 19 Welding Rod 73 Kls 20 1.2mm X 2" X 3" C-purlins 24 Pcs 21 3/16" X 1" X 1" Angle Bar 12 Pcs 22 3/16" X 1" Flat Bar 20 Pcs 23 1/4" X 3" X 3" Angle Bar 10 Pcs 24 3/16" X 2" X 2" Angle Bar 6 Pcs 25 1 1/2" G.i Pipe S-20 10 Pcs 26 1" G.i Pipe S-20 12 Pcs 27 Prepainted Long Span Roofing 0.4mm X 7.7m (blue) 11 Pcs 28 Pre-painted Fascia Cover (white) 16 Pcs 29 Pre-painted End Flashing (blue) 7 Pcs 30 Tekscrew 2" 900 Pcs 31 Tekscrew Adaptor 6 Pcs 32 Steel Brush 2 Pcs 33 Epoxy Metal Primer (gray) 5 Pcs 34 Epoxy Reducer 2 Pcs 35 Cutt Off Disc 14" 2 Pcs 36 Cutting Disc 4" 20 Pcs Ceiling Works 37 4.5mm X 4' X 8' Fiber Cement Board 28 Pcs 38 Double Metal Furring 88 Pcs 39 Wall Angle 19 Pcs 40 5/32" X 1/2" Blind Rivets 5 Box 41 All Purpose Epoxy 1 Liter 42 Riveter 1 Pc Painting Works 43 Flat Wall Latex 18 Gals 44 Semi Gloss Latex 35 Gals 45 Skim Coat 18 Bags 46 Sand Paper 60 Pcs 47 Paint Brush 1 1/2 4 Pcs 48 Baby Rollers W/ Pan 5 Pcs Doors And Windows 49 Loose Pin Hinges 2" X 4" 2 Pcs 50 Door Knob Heavy Duty 3 Pcs 51 0.6m X 2.1m Pvc Door With Louver 1 Set 52 0.9m X 2.1m Wooden Panel Door With 2" X 5" Door Jamb 2 Sets 53 1/4" Thk Glass Sliding Window On Aluminum Frame 143 Sqft Tile Works 54 60cm X 60cm Glazed Tiles (ground Floor) 73 Pcs 55 60cm X 60cm Glazed Tiles (second Floor) 110 Pcs 56 Tile Adhesive 14 Bags 57 Grout 6 Kls Electrical Works 58 Panel Board (60a-main, 1-20a, 3-30a) 1 Set 59 Flexible Hose 3/4 1 Roll 60 Led 12w Watts Bulb W/ Receptacle 12 Pcs 61 2.0mm² Tthn Wire 1 Roll 62 3.5mm² Tthn Wire 2 Rolls 63 5.5mm² Tthn Wire 40 L.m 64 8.0mm² Tthn Wire 40 L.m 65 Electrical Tape (big) 3 Rolls 66 Double Conv. Outlet (flush Type) 7 Pcs 67 1-gang Switch (flush Type) 2 Pcs 68 2-gang Switch (flush Type) 2 Pcs 69 Junction Box 4" X 4" W/ Cover 12 Pcs 70 Utility Box 2" X 4" Pvc 11 Pcs 71 1/2" Pvc Electrical Conduit Elbow (orange) 12 Pcs 72 1/2" Pvc Electrical Pipe (orange) 20 Pcs

Details: Description Republic Of The Philippines Province Of Cebu Municipality Of Alcantara Standard Form Number: Sf-infr-05 Revised On: Invitation To Apply For Eligibility And To Bid The Municipality Of Alcantara, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/contractors To Apply For Eligibility And To Bid For The Hereunder Project. Source Of Fund : Financial Assistance Name Of Project : Rehabilitation, Improvement And Construction Of Alcantara Heritage Park Location : Municipal Park Area, Barangay Poblacion Alcantara Cebu Brief Description : Supply Of Labor Materials And Equipment For The Implementation Of Rehabilitation,improvement And Construction Of Alcantara Heritage Park Abc : Php 3,000,000.00 Contract Duration : 90 Calendar Days Prospective Bidders Should Have Experience In Undertaking Similar Project Within Last 2 Years With An Amount At Least 50% Of The Proposed Project For Bidding, And Have Key Personnel And Equipment (listed In The Eligibility Forms) Available For The Prosecution Of The Contract. Prospective Bidder Should Have A Good Standing In Terms Of Project Implementation, No Pending / Delays Project Implementation. The Bac Will Use Non Discretionary Pass/fall Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulation (irr). The Schedule Of Bac Activities Is As Follows: Bac Activities Schedule 1. Submission Of Letters Of Intent And Application For Eligibility November 8 - 28, 2024 2. Submission Of Eligibility Requirements November 8 - 28, 2024 3. Issuance Of Bid Documents November 8 - 28, 2024 4. Pre-bid Conference November 15, 2024 5. Opening Of Bids November 28, 2024 6. Bid Evaluation November 29, 2024 7. Post Qualification December 2, 2024 8. Notice Of Award December 5, 2024 The Bac Will Issue Bidding Documents Only To Bidders Declared By The Bac To Be Eligible For The Bidding Upon Payment Of A Non-refundable Amount That Shall Correspond To The Abc As Indicated In The Table From General Guidelines On The Sale Of Bidding Document And To Paid To The Municipal Treasurer Of Alcantara Cebu The Municipality Of Alcantara Assumes No Responsibility Whatsoever To Compensate Or Indemnity Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Approved By: Dates Of Publication: Engr. Arturo M. Palencia Newspaper: Bac Chairperson Philgeps November 7, 2024 Republic Of The Philippines Province Of Cebu Municipality Of Alcantara Program Of Works Name Of Project : Rehabilitation, Improvement And Construction Of Alcantara Heritage Park Location : Municipal Park Area, Barangay Poblacion , Alcantara Cebu Duration : 90 Calendar Days Source Of Fund / Allocation / Reference : Financial Assistance / 3,000,000.00 / Or# 5125321 Dated 10/10/24 Mode Of Implementation : Straight Contract Account Code : 1-07-04-990 / Jev # 2024 -10 - 032244 Minimum Personnel Requirement : Foreman, Skilled , Unskilled Approved Budget For The Contract : Php 3,000,000.00 Minimum Equipment Requirement : R.roler, Power Tools , Hand Tools # Item / Description Qty Unit Materials Equipment Labor Cost Ocm Profit Taxes Total 1 General Requirements 1.1 Mobilization / Demobiization 1 Lot 8,000.00 1.2 Temporary Facilities 1 Lot 15,000.00 1.3 Safety Requirements 1 Lot 2,500.00 1.4 Billboard 1 Lot 2,188.90 2 Heritage Park Ground 5000 Sq.m. 850,000.00 36,000.00 255,000.00 171,150.00 114,100.00 71,312.50 1,497,562.50 3 Installation Of Solar Lights 21 Units 523,687.00 9,164.52 183,290.45 107,421.30 71,614.20 12,469.27 907,646.74 4 Painting Of Playground Flooring 560 Sq.m. 150,000.00 2,250.00 45,000.00 29,587.50 19,725.00 12,328.13 258,890.63 5 Rehabilitation Of Rotunda+ Main Entrance 28 Sq.m. 68,140.00 2,725.60 27,256.00 14,718.24 9,812.16 6,132.60 128,784.60 6 Improvement Of Existing Comfort Room 1 Lot 40,900.00 1,636.00 16,360.00 8,834.40 5,889.60 3,681.00 77,301.00 7 Concrete / Wooden Bench 20 Unit 50,200.00 2,510.00 25,100.00 11,671.50 7,781.00 4,863.13 102,125.63 Total Estimated Project Cost 1,682,927.00 54,286.12 552,006.45 343,382.94 228,921.96 110,786.63 3,000,000.00 Prepared By: Fund Availability : Approved By : Engr. Arturo M. Palencia Edison Incipido Atty. Fritz A. Lastimoso Municipal Engineer Municipal Treasurer Municipal Mayor

Details: Description Procurement Of Supply, Delivery, Installation, And Commissioning Of Processing Equipment Under Bangsamoro Assistance For Grassroots Innovation (bagi) - Tdif 2023 Ben. #1 Supply, Delivery And Installation Of Processing Equipment Of Charcoal Briquetting Process Of Sabaken Maguyaga Fishermen Cooperative Place Of Delivery: Brgy. Sabaken Northern Kabuntalan, Maguindanao Del Norte 1 .) Charcoal Crusher Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3.5kw (high-torque Electric Motor) Crushing Capacity: 300 – 500 Kg/h (depending On Charcoal Hardness And Moisture Content) Rotor Speed: 1,500 – 2,000 Rpm Feed Inlet Size: 300mm X 200mm Crushing Mechanism: Charcoal (lump Charcoal, Briquettes), Coal, And Biomass (optional) Hopper Capacity: 50 – 100 Kg Per Batch Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1100mm (h) Construction Material: Frame: Heavy-duty Steel Frame Blades/hammers: Hardened Steel For Durability Screens: Replaceable Stainless Steel Or Carbon Steel Mesh Discharge System: Gravity-based Or Optional Conveyor For Continuous Discharge Cooling System: Air-cooled Motor With Thermal Protection Safety Features: Emergency Stop Button Protective Covers Over Moving Parts Safety Lock On The Hopper Lid Lubrication: Manual Grease Lubrication For Bearings And Other Moving Parts Dust Control: Optional Dust Collection System Or Enclosed Design To Minimize Dust Dispersion Control System: On/off Switch With Overload Protection Adjustable Speed Control (optional For Certain Models) Operating Temperature: 5°c – 40°c Mobility: Equipped With Durable Wheels Or Skid Base For Easy Movement Accessories Included: Spare Blades/hammers Set Of Replacement Screens With Different Mesh Sizes Basic Toolkit For Maintenance Maintenance Requirements: Regular Lubrication And Periodic Blade Sharpening Or Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 2.) Charcoal Briquette Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3kw (high-torque Electric Motor For Heavy-duty Operation) Briquetting Capacity: 150 – 300 Kg/h (depending On Feed Material And Moisture Content) Briquette Size: Diameter: 50mm – 70mm (customizable) Length: Adjustable (40mm – 100mm) Biomass Materials (optional) Feed Inlet Size: 300mm X 200mm Hopper Capacity: 50 – 100 Kg Binding Material: Optional Binder Feed System (for Starch Or Clay Binders) Moisture Content Requirement: 8% – 12% For Optimal Briquette Formation Heating System: Optional Pre-heating For Better Briquette Cohesion Output Shape: Cylindrical, Hexagonal, Or Square (based On Mold Type) Construction Material: Frame: Heavy-duty Steel Construction Compression Chamber: Hardened Steel For Durability Operating Pressure: 30 – 60 Mpa (adjustable For Different Materials) Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Manual Or Automatic Conveyor Discharge (optional) Lubrication: Manual Grease Lubrication For Bearings And Compression System Control System: On/off Switch With Overload Protection Emergency Stop Button Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1200mm (h) Safety Features: Protective Covers Over Moving Parts Emergency Stop Button Overload Protection Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Movement Dust Control: Optional Dust Collection System Or Enclosed Feed System Accessories Included: Set Of Molds For Different Briquette Shapes And Sizes Maintenance Toolkit Operating Manual Maintenance Requirements: Regular Lubrication And Periodic Mold Inspection And Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 3.) Charcoal Mixer = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 10 Hp Mixing Capacity: 200 – 500 Kg/h (depending On Material Type And Moisture Content) Mixing Type: Horizontal Or Vertical Ribbon Mixer Mixing Chamber Volume: 200 Liters Material Compatibility: Charcoal Powder Charcoal Dust Biomass Materials (e.g., Wood Shavings, Sawdust) Binder Additives (if Applicable) Feed Inlet Size: 150mm X 150mm (with Safety Cover) Discharge Outlet Size: 100mm X 100mm (manual Or Pneumatic Discharge Options) Mixing Speed: 30 – 50 Rpm (fixed Speed) Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Mixing Blades: Hardened Steel For Long-lasting Durability Fuel Tank Capacity: 3.5 – 5 Liters (diesel Fuel) Fuel Consumption: 0.8 – 1.5 Liters Per Hour (depending On Load And Engine Type) Cooling System: Air-cooled Diesel Engine Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Engine Overload Protection Machine Dimensions: Approx. 1400mm (l) X 900mm (w) X 1200mm (h) Mobility: Equipped With Heavy-duty Wheels Or Skid Base For Easy Movement Included Accessories: Basic Maintenance Toolkit Operating Manual Spare Mixing Blades (optional) Control System: On/off Switch For Engine Control Throttle Control For Engine Speed Adjustment Maintenance Requirements: Regular Lubrication And Cleaning Of Mixing Components Diesel Engine Maintenance (oil Change, Filter Cleaning) Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 4.) Fabricated Solar Dryer House = 1 Pc Specifications: Drying Area: 20 M² Can Be Customized Based On Available Space And Drying Capacity. Structure Frame: Material: Galvanized Steel Or Aluminum Alloy Frame Frame Dimensions: Approx. 3m (w) X 6m (l) X 2.5m (h) For A 20 M² House Corrosion-resistant Material For Outdoor Durability. Covering Material: Uv-stabilized Polyethylene Or Polycarbonate Plastic Sheeting Thickness: 200 Microns – 300 Microns Lifespan: 3 – 5 Years (depending On Maintenance) Light Transmittance: 80% – 90% (for Optimal Drying Efficiency) Ventilation System: Adjustable Air Vents Or Windows On Sidewalls And Roof For Airflow Control. Optional Exhaust Fans (solar-powered) For Better Air Circulation. Flooring: Raised Mesh Or Perforated Flooring For Air Circulation Underneath Drying Materials Material: Food-grade Stainless Steel Or Heavy-duty Plastic. Optional: Concrete Flooring With Drainage System. Shelving: Multi-layer Drying Racks (3 To 5 Layers, Adjustable) Frame: Stainless Steel Or Galvanized Metal Mesh: Uv-resistant Plastic Or Food-grade Stainless Steel Shelving Space Per Layer: 1.5m X 6m (adjustable). Entry/exit: Sliding Or Hinged Doors With Uv Plastic Covering Optional Lockable Doors For Security Temperature Control: Natural Solar Heating (temperature Up To 50°c – 70°c Inside The Dryer) Optional Thermostat For Monitoring Temperature Levels. Moisture Control: Adjustable Air Vents To Control Humidity Levels. Optional Hygrometer For Humidity Measurement. Rain Protection: Sloped Roof Design For Rainwater Runoff. Sealed Edges To Prevent Water Seepage. Wind Resistance: Windproof Design, Capable Of Withstanding Wind Speeds Up To 80 Km/h. Capacity: Suitable For Drying Fruits, Vegetables, Seaweed, Fish, Spices, And Herbs. Approx. 100 – 500 Kg Of Materials Per Batch (depending On House Size And Product Type). Installation: Modular Design For Easy Assembly And Disassembly. Includes Assembly Manual And Required Hardware. Maintenance: Uv Plastic Requires Periodic Cleaning To Remove Dust And Debris. Frame And Ventilation System Should Be Inspected Regularly. Accessories Included: Solar-powered Exhaust Fans (optional). Digital Thermometer And Hygrometer (optional). Extra Uv Plastic Sheeting For Future Replacements. Operating Temperature: 5°c – 45°c (ambient Temperature Range For Optimal Operation). Weight: Approx. 100 – 300 Kg (depending On Size And Materials Used). Lifespan: Uv Plastic Cover Expected To Last 3 – 5 Years; Frame Expected To Last 10 – 15 Years With Proper Maintenance. Warranty: 1-year Warranty On Structure And Uv Plastic Covering. ----------------nothing Follows------------------ Ben. #2 Supply, Delivery And Installation Of Processing Equipment Of Livestock Feeds Production Of Igabay Coconut Farmers Organization Place Of Delivery: Brgy. Igabay, Balabagan, Lanao Del Sur 1.) Heavy-duty Hammer Mill Machine = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (diesel-powered, Air-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Material And Load) Production Capacity: 400 – 500 Kg/h (depending On Material Type And Moisture Content) Rotor Speed: 1,800 – 2,500 Rpm Hammer Type: Grain (corn, Wheat, Sorghum, Etc.) Biomass (wood Chips, Agricultural Waste) Stalks And Straw Dry Grasses And Forage Various Other Materials For Processing Screen Size Options: Multiple Screen Sizes (2mm – 10mm) For Different Output Particle Sizes Feed Inlet Size: Approx. 300mm X 200mm (customizable Based On Material Size) Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1300mm (h) Material Of Construction: Frame: Stainless Steel Hammers: Hardened Steel Screens: Replaceable Mesh Screens Made Of Stainless Discharge System: Gravity-based Or Optional Conveyor Belt Discharge Safety Features: Emergency Stop Button Heavy-duty Guards For Moving Parts Vibration-dampening Mounts For Stable Operation Lubrication System: Manual Grease Points For Bearings And Other Moving Parts Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Transport Included Accessories: Set Of Replacement Hammers Set Of Screens (with Different Mesh Sizes) Basic Toolkit For Maintenance Warranty: 1-year Warranty On Parts And Labor 2.) Feeds Pellet Mill Machine = 1 Set Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (air-cooled Or Water-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Load And Material) Production Capacity: 400 – 500 Kg/h (varies With Material Type And Pellet Size) Pellet Size: Adjustable From 2mm To 8mm (customizable Die Sizes) Die Type: Flat Die Or Ring Die (interchangeable Dies Available) Agricultural Waste Fish Meal And Other Feed Ingredients Hopper Capacity: 50 – 80 Kg Pelletizing Speed: 150 – 200 Rpm Feed Form: Dry Pellets Material Of Construction: Frame: Heavy-duty Steel Construction Rollers And Dies: Hardened Steel For Durability And Wear Resistance Discharge System: Gravity-based Or Optional Conveyor Pellet Length: Adjustable (via Cutting Knife At The Die) Machine Dimensions: Approx. 1600mm (l) X 900mm (w) X 1500mm (h) Cooling System: Air Or Water Cooling (to Prevent Overheating During Extended Use) Lubrication System: Manual Grease Lubrication For Bearings And Rollers Operating Temperature: 5°c – 40°c Safety Features: Emergency Stop Button Safety Guards On All Moving Parts Overload Protection Mobility: Mounted On Wheels Or Skid Base For Ease Of Transportation Included Accessories: Set Of Spare Dies (with Different Hole Sizes) Tool Kit For Basic Maintenance Operating Manual Fuel Tank Capacity: 10 – 15 Liters Pelletizing Efficiency: 90% – 95% Conversion Of Feedstock Into Pellets Warranty: 1-year Warranty On Parts And Labor 3.) Mixer Borrow Machine =1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 4.) Siever Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 0.75kw – 1.5kw (electric Motor With Variable Speed Control) Sieving Capacity: 300 – 500 Kg/h (depending On Material Type And Screen Size) Screen Type: Multiple-layer Vibrating Screens Stainless Steel Mesh (food-grade Or Standard Options Available) Fine Powders (flour, Starch, Etc.) Granular Materials (sand, Grains, Seeds) Dry Food Products Fertilizers Aggregates (cement, Construction Materials) Feeding System: Manual Or Automatic Feed Hopper With Adjustable Feed Rate Machine Dimensions: Approx. 1700mm (l) X 800mm (w) X 9000mm (h) Frame Construction: Heavy-duty Stainless Steel (rust-resistant, Suitable For Industrial Use) Control System: On/off Switch With Vibration Adjustment Thermal Overload Protection Vibration Mechanism: Eccentric Motor-driven Vibration System Operating Temperature: 5°c – 45°c Mobility: Fitted With Wheels Or Skid Base For Easy Movement Safety Features: Safety Guards On Moving Parts Emergency Stop Button Overload Protection Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Set Of Different Screen Meshes (with Various Sizes) Tool Kit For Maintenance And Screen Changes Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #3 Supply, Delivery And Installation Of Processing Equipment Of Livestock Feeds Production Of Kauran Allience Farmers Marketing Cooperative Place Of Delivery Brgy. Kauran, Ampatuan, Maguindanao Del Sur 1.) Heavy-duty Hammer Mill Machine = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (diesel-powered, Air-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Material And Load) Production Capacity: 400 – 500 Kg/h (depending On Material Type And Moisture Content) Rotor Speed: 1,800 – 2,500 Rpm Hammer Type: Grain (corn, Wheat, Sorghum, Etc.) Biomass (wood Chips, Agricultural Waste) Stalks And Straw Dry Grasses And Forage Various Other Materials For Processing Screen Size Options: Multiple Screen Sizes (2mm – 10mm) For Different Output Particle Sizes Feed Inlet Size: Approx. 300mm X 200mm (customizable Based On Material Size) Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1300mm (h) Material Of Construction: Frame: Stainless Steel Hammers: Hardened Steel Screens: Replaceable Mesh Screens Made Of Stainless Discharge System: Gravity-based Or Optional Conveyor Belt Discharge Safety Features: Emergency Stop Button Heavy-duty Guards For Moving Parts Vibration-dampening Mounts For Stable Operation Lubrication System: Manual Grease Points For Bearings And Other Moving Parts Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Transport Included Accessories: Set Of Replacement Hammers Set Of Screens (with Different Mesh Sizes) Basic Toolkit For Maintenance Warranty: 1-year Warranty On Parts And Labor 2.) Feeds Pellet Mill Machine = 1 Set Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 3.) Mixer Borrow Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 4.) Siever Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 0.75kw – 1.5kw (electric Motor With Variable Speed Control) Sieving Capacity: 300 – 500 Kg/h (depending On Material Type And Screen Size) Screen Type: Multiple-layer Vibrating Screens Stainless Steel Mesh (food-grade Or Standard Options Available) Fine Powders (flour, Starch, Etc.) Granular Materials (sand, Grains, Seeds) Dry Food Products Fertilizers Aggregates (cement, Construction Materials) Feeding System: Manual Or Automatic Feed Hopper With Adjustable Feed Rate Machine Dimensions: Approx. 1700mm (l) X 800mm (w) X 9000mm (h) Frame Construction: Heavy-duty Stainless Steel (rust-resistant, Suitable For Industrial Use) Control System: On/off Switch With Vibration Adjustment Thermal Overload Protection Vibration Mechanism: Eccentric Motor-driven Vibration System Operating Temperature: 5°c – 45°c Mobility: Fitted With Wheels Or Skid Base For Easy Movement Safety Features: Safety Guards On Moving Parts Emergency Stop Button Overload Protection Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Set Of Different Screen Meshes (with Various Sizes) Tool Kit For Maintenance And Screen Changes Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #4 Supply, Delivery And Installation Processing Equipment Of Seaweeds Chips Of Abs-mhet Aquamarine Producer. Place Of Delivery Brgy. San Reymundo, Jolo, Sulu 1.) Electric Dough Sheeter Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5 Kw Rolling Width: 600 Mm Dough Thickness Adjustment: Adjustable From 0.5 Mm To 10 Mm Manual Or Automatic Thickness Adjustment System Frame: Heavy-duty Stainless Steel Or Painted Carbon Steel Rollers: Food-grade Stainless Steel For Easy Cleaning And Durability Dimensions: Approx. 1200 Mm (l) X 800 Mm (w) X 1100 Mm (h) Safety Features: Emergency Stop Button Safety Guards On Rollers Overload Protection Control System: On/off Switch With Overload Protection Variable Speed Control For Conveyor And Roller Speed Cleaning System: Easy Access For Cleaning Rollers And Conveyor Removable Parts For Thorough Cleaning Mobility: Equipped With Sturdy Wheels Or Skid Base For Easy Transport Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Maintenance Toolkit Operating Manual Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 2.) Seaweeds Grinder Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 3 Kw (high-torque Electric Motor For Heavy-duty Operation) Grinding Capacity: 100 – 200 Kg/h (depending On Seaweed Type And Moisture Content) Grinding Mechanism: Hammer Mill Or Knife Mill Grinding System Adjustable Grinding Fineness (1 Mm To 5 Mm Particle Size) Other Plant Materials (optional) Screen Type: Removable Stainless Steel Screen For Varying Particle Sizes Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Gravity-based Discharge Or Optional Conveyor For Continuous Operation Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Grinding Chamber: Corrosion-resistant Material Suitable For Marine Products Machine Dimensions: Approx. 1500 Mm (l) X 800 Mm (w) X 1200 Mm (h) Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Overload Protection Control System: On/off Switch With Overload Protection Variable Speed Control (optional) Lubrication: Manual Grease Lubrication For Bearings And Grinding Components Mobility: Equipped With Sturdy Wheels For Easy Movement Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Spare Screens Of Different Mesh Sizes Maintenance Toolkit Operating Manual Cleaning System: Easy Access For Cleaning And Maintenance Dust Control: Optional Dust Extraction System Or Enclosed Design To Minimize Dust Dispersion Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 3.) Seaweeds Solar Dryer Machine = 1 Pc Specifications: Power Supply: 12v Dc (powered By Solar Panel And Battery System) Solar Panel: Type: Monocrystalline Or Polycrystalline Power Output: 100w – 200w Voltage: 12v Battery: Drying Method: Natural Convection Drying With Solar Heat Optional Fan-assisted Airflow For Improved Efficiency Drying Chamber Dimensions: Approx. 1200mm (l) X 800mm (w) X 800mm (h) Adjustable Shelving For Effective Drying 7 Layer Tray Rack Compatible To Drying Chamber Material Compatibility: Fresh Or Dried Seaweeds (e.g., Agar, Carrageenan) Other Plant Materials (optional) Construction Material: Frame: Heavy-duty Aluminum Or Stainless Steel Chamber: Uv-resistant Polycarbonate Or Insulated Metal Temperature Control: Thermostat With Temperature Gauge (up To 60°c) Adjustable Airflow Control For Optimal Drying Conditions Ventilation System: Adjustable Vents For Moisture Control Optional Exhaust Fan (12v Dc) For Enhanced Airflow Weight: Approx. 50 – 80 Kg (depending On Materials Used) Mobility: Equipped With Wheels Or A Skid Base For Easy Movement Included Accessories: Solar Panel Mounting Brackets Battery Charger And Controller Shelving Units For Drying Operating Manual Cleaning System: Easy Access For Cleaning The Drying Chamber Dust Control: Enclosed Design To Minimize Dust Ingress Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #5 Supply, Delivery And Installation Of Processing Equipment Of Charcoal Briquetting Process Of Sabaken Maguyaga Fishermen Cooperative Place Of Delivery Brgy. Panosolen, Gen. Salipada K. Pendatun, Maguindanao Del Sur 1.) Charcoal Crusher Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3.5kw (high-torque Electric Motor) Crushing Capacity: 300 – 500 Kg/h (depending On Charcoal Hardness And Moisture Content) Rotor Speed: 1,500 – 2,000 Rpm Feed Inlet Size: 300mm X 200mm Crushing Mechanism: Charcoal (lump Charcoal, Briquettes), Coal, And Biomass (optional) Hopper Capacity: 50 – 100 Kg Per Batch Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1100mm (h) Construction Material: Frame: Heavy-duty Steel Frame Blades/hammers: Hardened Steel For Durability Screens: Replaceable Stainless Steel Or Carbon Steel Mesh Discharge System: Gravity-based Or Optional Conveyor For Continuous Discharge Cooling System: Air-cooled Motor With Thermal Protection Safety Features: Emergency Stop Button Protective Covers Over Moving Parts Safety Lock On The Hopper Lid Lubrication: Manual Grease Lubrication For Bearings And Other Moving Parts Dust Control: Optional Dust Collection System Or Enclosed Design To Minimize Dust Dispersion Control System: On/off Switch With Overload Protection Adjustable Speed Control (optional For Certain Models) Operating Temperature: 5°c – 40°c Mobility: Equipped With Durable Wheels Or Skid Base For Easy Movement Accessories Included: Spare Blades/hammers Set Of Replacement Screens With Different Mesh Sizes Basic Toolkit For Maintenance Maintenance Requirements: Regular Lubrication And Periodic Blade Sharpening Or Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 2.) Charcoal Briquette Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3kw (high-torque Electric Motor For Heavy-duty Operation) Briquetting Capacity: 150 – 300 Kg/h (depending On Feed Material And Moisture Content) Briquette Size: Diameter: 50mm – 70mm (customizable) Length: Adjustable (40mm – 100mm) Biomass Materials (optional) Feed Inlet Size: 300mm X 200mm Hopper Capacity: 50 – 100 Kg Binding Material: Optional Binder Feed System (for Starch Or Clay Binders) Moisture Content Requirement: 8% – 12% For Optimal Briquette Formation Heating System: Optional Pre-heating For Better Briquette Cohesion Output Shape: Cylindrical, Hexagonal, Or Square (based On Mold Type) Construction Material: Frame: Heavy-duty Steel Construction Compression Chamber: Hardened Steel For Durability Operating Pressure: 30 – 60 Mpa (adjustable For Different Materials) Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Manual Or Automatic Conveyor Discharge (optional) Lubrication: Manual Grease Lubrication For Bearings And Compression System Control System: On/off Switch With Overload Protection Emergency Stop Button Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1200mm (h) Safety Features: Protective Covers Over Moving Parts Emergency Stop Button Overload Protection Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Movement Dust Control: Optional Dust Collection System Or Enclosed Feed System Accessories Included: Set Of Molds For Different Briquette Shapes And Sizes Maintenance Toolkit Operating Manual Maintenance Requirements: Regular Lubrication And Periodic Mold Inspection And Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 3.) Charcoal Mixer = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 10 Hp Mixing Capacity: 200 – 500 Kg/h (depending On Material Type And Moisture Content) Mixing Type: Horizontal Or Vertical Ribbon Mixer Mixing Chamber Volume: 200 Liters Material Compatibility: Charcoal Powder Charcoal Dust Biomass Materials (e.g., Wood Shavings, Sawdust) Binder Additives (if Applicable) Feed Inlet Size: 150mm X 150mm (with Safety Cover) Discharge Outlet Size: 100mm X 100mm (manual Or Pneumatic Discharge Options) Mixing Speed: 30 – 50 Rpm (fixed Speed) Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Mixing Blades: Hardened Steel For Long-lasting Durability Fuel Tank Capacity: 3.5 – 5 Liters (diesel Fuel) Fuel Consumption: 0.8 – 1.5 Liters Per Hour (depending On Load And Engine Type) Cooling System: Air-cooled Diesel Engine Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Engine Overload Protection Machine Dimensions: Approx. 1400mm (l) X 900mm (w) X 1200mm (h) Mobility: Equipped With Heavy-duty Wheels Or Skid Base For Easy Movement Included Accessories: Basic Maintenance Toolkit Operating Manual Spare Mixing Blades (optional) Control System: On/off Switch For Engine Control Throttle Control For Engine Speed Adjustment Maintenance Requirements: Regular Lubrication And Cleaning Of Mixing Components Diesel Engine Maintenance (oil Change, Filter Cleaning) Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 4.) Fabricated Solar Dryer House = 1 Pc Specifications: Drying Area: 20 M² Can Be Customized Based On Available Space And Drying Capacity. Structure Frame: Material: Galvanized Steel Or Aluminum Alloy Frame Frame Dimensions: Approx. 3m (w) X 6m (l) X 2.5m (h) For A 20 M² House Corrosion-resistant Material For Outdoor Durability. Covering Material: Uv-stabilized Polyethylene Or Polycarbonate Plastic Sheeting Thickness: 200 Microns – 300 Microns Lifespan: 3 – 5 Years (depending On Maintenance) Light Transmittance: 80% – 90% (for Optimal Drying Efficiency) Ventilation System: Adjustable Air Vents Or Windows On Sidewalls And Roof For Airflow Control. Optional Exhaust Fans (solar-powered) For Better Air Circulation. Flooring: Raised Mesh Or Perforated Flooring For Air Circulation Underneath Drying Materials Material: Food-grade Stainless Steel Or Heavy-duty Plastic. Optional: Concrete Flooring With Drainage System. Shelving: Multi-layer Drying Racks (3 To 5 Layers, Adjustable) Frame: Stainless Steel Or Galvanized Metal Mesh: Uv-resistant Plastic Or Food-grade Stainless Steel Shelving Space Per Layer: 1.5m X 6m (adjustable). Entry/exit: Sliding Or Hinged Doors With Uv Plastic Covering Optional Lockable Doors For Security Temperature Control: Natural Solar Heating (temperature Up To 50°c – 70°c Inside The Dryer) Optional Thermostat For Monitoring Temperature Levels. Moisture Control: Adjustable Air Vents To Control Humidity Levels. Optional Hygrometer For Humidity Measurement. Rain Protection: Sloped Roof Design For Rainwater Runoff. Sealed Edges To Prevent Water Seepage. Wind Resistance: Windproof Design, Capable Of Withstanding Wind Speeds Up To 80 Km/h. Capacity: Suitable For Drying Fruits, Vegetables, Seaweed, Fish, Spices, And Herbs. Approx. 100 – 500 Kg Of Materials Per Batch (depending On House Size And Product Type). Installation: Modular Design For Easy Assembly And Disassembly. Includes Assembly Manual And Required Hardware. Maintenance: Uv Plastic Requires Periodic Cleaning To Remove Dust And Debris. Frame And Ventilation System Should Be Inspected Regularly. Accessories Included: Solar-powered Exhaust Fans (optional). Digital Thermometer And Hygrometer (optional). Extra Uv Plastic Sheeting For Future Replacements. Operating Temperature: 5°c – 45°c (ambient Temperature Range For Optimal Operation). Weight: Approx. 100 – 300 Kg (depending On Size And Materials Used). Lifespan: Uv Plastic Cover Expected To Last 3 – 5 Years; Frame Expected To Last 10 – 15 Years With Proper Maintenance. Warranty: 1-year Warranty On Structure And Uv Plastic Covering. ----------------nothing Follows------------------ Ben. #6 Supply, Delivery And Installation Of Processing Equipment Of Fresh Water Fish Processing Of Bangsamoro Grassroot Anti-poverty Agriculture Cooperative Place Of Delivery Brgy. Lagunde Pikit, North Cotabato 1.) Production And Packaging Equipment = 1 Set Working Table = 1 Pc Table Dimensions: Length: 1500mm (1.5m) Width: 700mm (0.7m) Height: 850mm (standard Working Height) Material: Tabletop: Food-grade Stainless Steel (grade 304), Corrosion-resistant And Easy To Clean. Frame And Legs: Heavy-duty Stainless Steel Or Galvanized Steel For Durability And Stability. Undershelf: Optional Stainless Steel Shelf For Additional Storage. Surface Finish: Smooth, Non-porous, And Polished Surface To Prevent Bacteria Buildup And Ensure Easy Cleaning. Edge Corners Rounded For Safety And Cleanliness. Load Capacity: Capable Of Holding Up To 200 Kg Of Fish And Processing Tools. Stainless Steel Collander (double Ears) = 10 Pcs "material Type: High-quality Food-grade Stainless Steel (grade 304). Corrosion Resistance: Rust-proof And Corrosion-resistant, Suitable For Handling Fish And Other Seafood. Finish: Polished Or Brushed Stainless Steel For Easy Cleaning And Hygiene. Sizes: 2 Pcs Small: Diameter: 250mm (25cm), Depth: 120mm (12cm), Capacity: 4 Liters, Weight: 0.7 Kg 2 Pcs Medium: Diameter: 300mm (30cm), Depth: 150mm (15cm), Capacity: 7 Liters, Weight: 1 Kg 3 Pcs Large: Diameter: 350mm (35cm), Depth: 170mm (17cm), Capacity: 10 Liters, Weight: 1.3 Kg 3 Pcs Extra-large: Diameter: 400mm (40cm), Depth: 200mm (20cm), Capacity: 15 Liters, Weight: 1.8 Kg " Household Scales = 2 Pcs "capacity And Accuracy Maximum Capacity: 10 Kg (22 Lbs) Graduation/accuracy: 1 Gram (0.001 Kg) Weighing Units: Kg, G, Lb, Oz Type: Large Lcd Digital Display With Backlight For Clear Visibility. Screen Size: 50mm X 30mm (approximately) Display Features: Shows Weight, Low Battery, Overload Indicator, And Tare Function. Button Functions: Power, Tare, Unit Conversion. Power Source: 2 X Aaa Batteries Or Rechargeable Battery (depending On Model) And Ac Adapter Option For Continuous Use In Commercial Settings. Dimensions And Weight Overall Dimensions: 250mm (l) X 230mm (w) X 60mm (h) Weight: 1.2 Kg Compliance Food Safety: Compliant With Haccp Standards For Safe Use In Food Processing Environments. Calibration: Factory Calibrated And Can Be Re-calibrated As Needed " Measuring Cups And Spoon, Set = 2 Pcs "measuring Cups Specifications: Material: Food-grade Stainless Steel Or Bpa-free Plastic Sizes: 1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup Measuring Spoons Specifications: Material: Food-grade Stainless Steel Or Bpa-free Plastic Sizes: 1 Tablespoon, 1/2 Tablespoon, 1 Teaspoon, 1/2 Teaspoon, 1/4 Teaspoon " Stainless Steel Knife Set = 2 Pcs Stainless Basin = 5 Pcs * Deep Stainless Steel Basin And Stainless Steel Basins Digital Weighing Scale = 2 Pcs "capacity: 10 Kg (22 Lbs) Accuracy: 1 Gram (0.001 Kg) Units: Kg, G, Lb, Oz Display: Large Lcd Digital Display With Backlight. Shows Weight, Low Battery, And Overload Indicators. Platform: Material: Food-grade Stainless Steel Size: 250mm X 250mm Power: Powered By 2 X Aaa Batteries Or Rechargeable Battery (optional Ac Adapter) Auto-off After 2 Minutes Of Inactivity " Utensils, Set (spatula, Paddle, Bowls,) = 3 Pcs Impluse Sealer = 2 Pcs "sealing Length: 300mm, Material: Durable Metal Housing, Corrosion-resistant And Heat-resistant Sealing Strip For Continuous Use Sealing Width: 2mm – 5mm (adjustable, Depending On Model) Heating Time: Adjustable (0.2 - 1.5 Seconds) For Various Bag Thicknesses Power Supply: Standard 220v, Single-phase Seal Types: Works With Pp, Pe, And Laminated Packaging Films Ideal For Sealing Plastic Bags Up To 0.2mm In Thickness Weight: Approximately 2–4 Kg, Depending On Model " Stainless Steel Knife = 4 Set "material: Blades: High-carbon Stainless Steel For Sharpness And Corrosion Resistance Handles: Ergonomic, Non-slip, And Easy-to-grip Polypropylene Or Stainless Steel Handles Knife Types (common In Fish Processing): Fillet Knife: Flexible Blade, 6-8 Inches, For Precise Filleting Boning Knife: 5-6 Inches, Stiff Blade For Deboning Chef’s Knife: 8 Inches, Multipurpose For Cutting, Slicing Utility Knife: 4-6 Inches, For Smaller Tasks And Trimming Cleaver: Heavy-duty, Ideal For Cutting Through Bones (optional In Some Sets)" Tray Rack,24 Trays Cap = 1 Pc "material: Stainless Steel Or Aluminum For Durability And Corrosion Resistance, Ideal For Food Processing Environments. Capacity: Holds Up To 24 Trays (compatible With Standard Trays Approximately 18"" X 26""). Dimensions: Overall Size: Approx. 180 Cm (h) X 60 Cm (w) X 50 Cm (d)" Soaking, S/s, 20l Cap, With Strainer = 10 Set "material: Stainless Steel (s/s) For Durability, Rust Resistance, And Easy Cleaning. Food-grade Material Safe For Direct Food Contact. Capacity: 20 Liters (suitable For Soaking Larger Batches Of Fish Or Other Food Items). Bowl Diameter: Approx. 35 Cm Height: Approx. 25 Cm" Stainless Mixing Bowl (different Sizes) = 10 Set "material: High-quality Stainless Steel For Durability, Rust Resistance, And Easy Maintenance. Food-grade, Safe For All Food Preparation Tasks. Sizes: Small: 1.5 Liters Medium: 3 Liters Large: 5 Liters Extra Large: 7 Liters" Stainless Steel Double Handle Frying Pan = 10 Set "material: Stainless Steel For Durability, Even Heat Distribution, And Rust Resistance. Food-grade, Suitable For High-heat Cooking. Size: Diameter: Available In Various Sizes, Commonly 30 Cm To 40 Cm. Depth: Approximately 5 Cm To 7 Cm, Ideal For Frying " Stainless Steel Colander = 10 Pcs "material: High-quality Stainless Steel, Rust-resistant And Durable. Food-grade, Suitable For Rinsing And Draining Food Items. Size: Available In Various Sizes, Typically 2 To 5 Liters Capacity. Diameter: 20 Cm To 30 Cm (varies By Model)." Measuring Cups And Spoons For Liquid = 10 Set "material: Food-grade Plastic Bpa-free If Plastic, For Safe Use With Liquids. Sizes: Measuring Cups: Commonly Includes 1 Cup (240 Ml), 1/2 Cup (120 Ml), 1/3 Cup (80 Ml), And 1/4 Cup (60 Ml). Measuring Spoons: Includes 1 Tablespoon (15 Ml), 1 Teaspoon (5 Ml), 1/2 Teaspoon (2.5 Ml), And 1/4 Teaspoon (1.25 Ml)." Cutting/chopping Board = 10 Pcs "material: Food-grade Plastic Non-porous And Stain-resistant To Prevent Bacterial Growth. Sizes: Small: 20 Cm X 15 Cm, Ideal For Small Tasks. Medium: 30 Cm X 20 Cm, Suitable For General Chopping. Large: 40 Cm X 30 Cm, Ideal For Cutting Larger Items." Kitchen Shears = 10 Set "material: Stainless Steel Blades For Durability, Rust Resistance, And Sharpness. Comfortable Handle Made Of Plastic Or Rubber, Often Ergonomic For Better Grip. Blade Length: Typically 8-10 Cm Cutting Length; Overall Length Around 20 Cm." Stainless Steel Knife = 2 Set "material: Stainless Steel Blades For Sharpness, Durability, And Corrosion Resistance. Handles Made From Plastic, Wood, Or Rubber For A Comfortable And Secure Grip. Set Includes (common Options): Chef's Knife (8 Inches): For Slicing, Dicing, And Chopping. Bread Knife (8 Inches): Serrated For Slicing Bread. Utility Knife (5 Inches): For Cutting Smaller Foods And Herbs. Paring Knife (3.5 Inches): For Peeling And Intricate Tasks." Casserole With Glass Lid = 3 Pcs "material: Stainless Steel Or Aluminum For Durability And Even Heat Distribution. Tempered Glass Lid With Steam Vent To Monitor Cooking Without Lifting The Lid. Capacity: Available In Various Sizes, Commonly 2 Liters To 6 Liters." Mixing Bowl Different Sizes (10l, 20l, 30l, 50l) = 10 Set "material: Food-grade Plastic (bpa-free) For Safety And Durability. Lightweight And Resistant To Staining And Odors. Sizes: 10 Liters: Suitable For Small To Medium Mixing Tasks. 20 Liters: Ideal For Larger Mixing Jobs Or Food Prep. 30 Liters: Great For Mixing Large Batches Of Ingredients. 50 Liters: Perfect For Heavy-duty Mixing In Commercial Kitchens." Plastic Food Grade Storage Boxes = 10 Pcs "material: Food-grade Polypropylene (pp) Or Polyethylene (pe), Safe For Food Storage. Sizes: 20 Kg Box (5pcs): Dimensions: Approximately 600mm (l) X 400mm (w) X 300mm (h) Capacity: Suitable For Storing Up To 20 Kg Of Food Items. 30 Kg Box(5 Pcs): Dimensions: Approximately 700mm (l) X 500mm (w) X 350mm (h)" 2.) Cooking Facility = 1 Set Gas Oven = 1 Pc "type: Gas Oven With Thermostat Capacity: Number Of Trays: 12 Trays Tray Size: Standard Size (approximately 40cm X 60cm Or Customizable Based On Design) Temperature Control: Thermostat: Adjustable Thermostat For Precise Temperature Control. Temperature Range: Typically Between 100°c To 300°c. Burners: Number Of Burners: 2 To 4 Gas Burners (depending On Model). Ignition Type: Manual Or Automatic Ignition System. Construction: Material: Heavy-duty Stainless Steel For Durability And Easy Cleaning. Insulation: Insulated Walls To Maintain Temperature And Reduce Heat Loss. Dimensions: Overall Size: Approximately 100cm (w) X 80cm (d) X 70cm (h) Fuel Type: Lpg " Complete Set Of Stove And Gas Tank = 2 Pcs Double Boiler Pot = 2 Pcs "capacity: 1.5 Liters To 4 Liters. " Stainless Steel Streamer = 1 Pc "material: High-quality Stainless Steel For Durability And Resistance To Rust And Corrosion. Size: 3 Liters To 10 Liters Capacity." Stainless Mixing Bowl = 5 Set "material: Made Of High-quality Stainless Steel For Durability, Corrosion Resistance, And Easy Cleaning. Sizes: Small: 1.5 Liters (1.6 Quarts) Medium: 3 Liters (3.2 Quarts) Large: 5 Liters (5.3 Quarts) Extra Large: 7 Liters (7.4 Quarts)" 3.) Upright Freezer = 1 Set Specifications: Power Supply: Single-phase (220v, 50hz) Capacity: 250 – 300 Liters (8.8 – 10.6 Cubic Feet) Temperature Range: -18°c To -25°c (adjustable Thermostat) Cooling System: Direct Cooling Or Fan-assisted Cooling (optional) Compressor Type: High-efficiency Inverter Compressor For Energy Savings Number Of Shelves: 4 – 6 Adjustable Wire Shelves Or Glass Shelves Door Type: Double Door, Swing Type Magnetic Door Seal For Air-tight Closure Defrosting: Manual Or Automatic Defrost (optional) Interior Lighting: Led Lighting For Energy Efficiency And Visibility Temperature Control: Digital Temperature Display With External Control Dimensions: Approx. 1210mm (w) X 730mm (d) X 1900mm (h) Weight: 45 – 60 Kg Safety Features: Overload And Overheat Protection Lockable Door For Security Mobility: Equipped With Caster Wheels For Easy Relocation Warranty: 2-year Warranty On Parts And Labor, 5-year Warranty On Compressor 4.) Food Dehydrator = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Power Consumption: 2.5kw Drying Capacity: 50 – 200 Kg Per Batch (depending On Machine Size And Type Of Fish) Drying Method: Hot Air Circulation System (electric Heating Elements With Fans) Temperature Range: 30°c – 90°c (adjustable) Drying Time: 4 – 12 Hours (depending On The Type Of Fish, Thickness, And Moisture Content) Tray Material: Stainless Steel Food-grade Trays (removable And Stackable) Number Of Trays: 10 Trays (upper And Lower Rack Gap: 34mm) Air Circulation System: Forced Air With Multiple Fans For Uniform Drying Construction Material: Exterior: Stainless Steel Or Powder-coated Mild Steel Interior: Stainless Steel (food-grade, Corrosion-resistant) Insulation: High-density Insulation Material To Minimize Heat Loss Humidity Control: Adjustable Humidity Control To Ensure Precise Drying Control System: Digital Temperature And Timer Control Overheat Protection Automatic Shut-off With Alarm Moisture Removal: 80% – 95% Moisture Reduction (depending On Drying Settings) Airflow: Horizontal Or Vertical Airflow (adjustable Based On Tray Configuration) Ventilation: Adjustable Vents For Moisture Release Mobility: Equipped With Caster Wheels For Easy Movement Included Accessories: Spare Heating Elements Tray Cleaning Kit User Manual And Maintenance Guide Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------

Purchaser Name: EHPAD The Wine In The Wood OZG 03 | Treatment of flat linen, terry linen and professional outfits for the La Vigne Au Bois nursing home in Cérilly 03350