Wood Tenders

Wood Tenders

Stiftung Preu Ische Schl Sser Und G Rten Berlin Brandenburg Tender

Others
Germany
Details: Restoration of a marquetry, Frederickian panel parquet from the New Palace in the Sanssouci Park, Upper Concert Hall, Room 260 Conservation and restoration work on the panel parquet: - Dismantling of the panel parquet 120 m2 / Investigation of the original installation - Installation of an interim floor - Work on the damaged solid wood - Securing the structure - Strengthening loose veneers / marquetry - Addition of missing veneers / marquetry - Filling and retouching of added areas - Installation of the panel parquet - Processing of the covering - Documentation in words and pictures - Mapping of damage and measures in Metigomap The following must be submitted with the application: Restorer (academic degree) or equivalent (proof), focus on wooden objects with refined surfaces and at least 5 years of professional experience in the restoration of marquetry panel parquet from the 18th century. At least 3 traceable and verifiable references from the last 5 years for comparable work must be submitted in PDF format. The documentation must be prepared in accordance with the specifications of a state office for monument preservation. Application deadline: November 20, 2024, 12:00 p.m.
Closing Date16 Nov 2024
Tender AmountRefer Documents 

Zweckverband Industriepark Schwarze Pumpe ZV ISP Vertreten Durch Die ASG Spremberg GmbH Als Treuh Nder Tender

Civil And Construction...+2Others, Civil Works Others
Germany
Details: The planning area is in the Saxon part of the Schwarze Pumpe industrial site (isp). The planned clearing of the construction site is a preparatory measure for the renovation of the polishing ponds. The felling and clearing are planned for winter 2024/2025. In total, there is around 5.67 hectares of area to be felled and cleared. The quantity determination takes 5,000 m² into account for additional areas. The area sizes can vary depending on the forest conversion permit. The scope of services includes the following services: > 01 Wood clearing 2024/2025 01.01 Setup, auxiliary services 01.02 Traffic safety at work sites 01.04 Felling and clearing work 2024/2025 01.05 Ancillary work Safety instructions for execution The measure is located in a fire-prone area due to underlying coal dust. Any use of open fire (smoking, etc.) is strictly prohibited in this area. When carrying out work in dry periods, care must be taken to moisten the risk area.
Closing Soon11 Nov 2024
Tender AmountRefer Documents 

Municipality Of Tupi, South Cotabato Tender

Others
Corrigendum : Closing Date Modified
Philippines
Details: Description Republic Of The Philippines Province Of South Cotabato Bids And Awards Committee Salada Street, Poblaciontupi, South Cotabato Tel. Fax No.: (083) 226-1045 Invitation To Bid For The Supply & Delivery Of Materials For The Construction Of 1 Cl Classroom At Polonuling National High School, Polonuling, Tupi, South Cotabato 1. The Municipality Of Tupi Through The Trust Fund Intends To Apply The Sum Of Php 647,636.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Materials For The Construction Of 1 Cl Classroom At Polonuling National High School, Brgy. Polonuling, Tupi, South Cotabato/itb 048-2023. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Tupi Now Invites Bids For The Construction Materials. Delivery Of Goods Is Required Seven (7) Days After The Signing Of The Contract. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Tupi Bac-secretariat, And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00 Pm, Mondays –fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On May 12, 2023 To May 22, 2023 From The Bids And Awards Committee-secretariat, Municipality Of Tupi, South Cotabato And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of 1,000.00 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before May 23, 2023, 12:00 Noon. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On May 23, 2023, 2:00 P.m At 2nd Floor Bac Conference Room, Municipal Hall, Tupi, South Cotabato. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Municipality Of Tupi Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Bac Secretariat Tupi Municipal Hall Poblacion, Tupi, South Cotabato Tel No. 083-226-1045x Email: Tupi.bacsecretariat@gmail.com Republic Of The Philippines Province Of South Cotabato Municipality Of Tupi Bids And Awards Committee Invitation To Bid Date: May 9, 2023 Itb No: 048-2023 Please Submit Your Sealed Bids For The Supply And Delivery Of Materials For The Construction Of 1 Cl Classroom At Polonuling National High School, Polonuling, Tupi, South Cotabato Listed Below At The Bac Secretariat Office On Or Before The Opening Of Bids On May 23, 2023 At 2:00 P.m. Note: 1. Abc= Php 647,636.00 2. All Entries Must Be Typewritten/printed Ligibly. Avoid Erasures. 3. Delivery Period Within __ Calendar Days. 4. Warranty Shall Be For A Period Of One (1) Year From The Date Of Acceptance By The Procuring Entity. 5. Bids Shall Be Accompanied By Bond In The Form Of Cash, Manager's Check Equal To 2% Or Surety Bond Equal To 5% Of The Approved Budget For The Contract Or A Bid Securing Declaration. 6. Bidders Shall Submit Original Brochures Showing Certifications Of Product Being Offered. Item No. Item & Description Qty Unit Unit Price Total Amount 1. Cement 330 Bags 2. Washed Sand 30 Cu.m 3. 3/4 Gravel 18 Cu.m 4. 16mm Diam. Rsb 58 Lnght 5. 12mm Diam. Rsb 96 Lnght 6. 10mm Diam Rsb 228 Lngth 7. # 16 Tie Wire 64 Kgs 8. 10cmx20x40cm Chb 2000 Pcs 9. Cutting Dist 50 Pcs 10. Diamond Cutting Disk 4 Pcs 11. 150pcs, 2x2x12 Coco Lumber 300 Bd.ft 12. 150pcs, 2x3x12 Coco Lumber 900 Bd.ft 13. 4x8x10mm Thk. Ordinary Plyboard 10 Shts 14. 4" Cw Nails 25 Kls 15. 3" Cw Nails 25 Kls 16. 2 1/2" Cw Nails 25 Kls 17. 1 1/2" Cw Nails 25 Kls 18. 4" Concrete Nails 5 Kgs 19. 2"x2"x3/16 Angle Bar 2 Length 20. 2"x4"x1.20mm Thick C-purlins 49 Length 21. 2"x3"x1.20mm Thick C-purlins 17 Length 22. Ga 24x8' Corrugated G.i Sheet 44 Ln.m 23. Ga 24x12' Corrugated G.i Sheet 10 Ln.m 24. Roofgard (foam Green Color) 4 Pail 25. 2" Teckscrew 400 Pcs 26. 0.40mm Thick Pre-fab. Ridge Roll 5 Pcs 27. 0.40mm Thick Pre-fab. Gutter 10 Pcs 28. 0.40mm Thick Pre-fab. Flashing 11 Pcs 29. 1/8x7/8 Rivets @ 250pcs/box 25 Box 30. 1611 Welding Rod @ 5kls/box 3 Box 31. Red Oxide 1 Pail 32. Paint Thinner 10 Gal. 33. 4" Paint Brush 6 Pcs 34. Water Closet Set Heavy Duty Veronica White Package Model (including Soap & Tissue Holder ) With Complete Accessories 2 Set 35. 4" Dia.x 3m S1000 Pvc Pipe 3 Pcs. 36. 4" Dia. S1000 Pvc Wye 3 Pcs. 37. 4" Dia. S1000 Pvc Elbow 90˚ 4 Pcs. 38. 4" Dia. S1000 Pvc U-trap 2 Pcs. 39. 4" S1000 Pvc Clean Out W/ Plug 4 Pc. 40. 3" Dia. S1000 Pvc Pipe 6 Lengths 41. 3" Dia. S1000 Pvc Elbow 90˚ 3 Pcs. 42. 3" Dia. S1000 Pvc Wye 3 Lengths 43. 3" Dia. S1000 Pvc U-trap 2 Pcs. 44. 3" Dia. S1000 Pvc Tee 2 Pcs. 45. 4" Dia.x 2" S1000 Pvc Tee Reducer 2 Pcs 46. 3" Dia.x 2" S1000 Pvc Tee Reducer 2 Pcs 47. 2" Dia. S1000 Pvc Tee 2 Pcs 48. 4"x4" Stainless Floor Drain 2 Lengths 49. 1/2" Dia. Gooseneck Faucet (hd) 2 Pcs. 50. 1/2" Dia. Upvc Pipe 4 Lengths 51. 1/2" Dia. Upvc Tee 2 Pc. 52. 1/2" Dia. Upvc Elbow 90˚ 6 Pcs. 53. 1/2" Dia. Upvc Coupling 8 Pcs. 54. 1/2" Dia. Upvc Female Threaded Adaptor 4 Pcs. 55. 1/2" Dia. Upvc Cup Plug 2 Pcs. 56. Cement Solvent 5 Can 57. 4" X 4" Junction Box 8 Set 58. 32mm Ø Electrical Pvc Conduit Pipe 2 Lengths 59. 20mm Ø Electrical Pvc Conduit Pipe 5 Lengths 60. 20mm Ø Electrical Pvc Elbow 2 Pcs 61. Flexible Hose # 1/2 1 Rolls 62. 30mm2 Thhn Copper Wire 3 M 63. #12 Thhn Copper Wire 1 Rolls 64. #14 Thhn Copper Wire 1 Rolls 65. 1 Gang Switch With Luminous Light On Switch 2 Sets 66. 3 Gang Switch With Luminous Light On Switch 2 Sets 67. 3 Gang Convenience Outlet (flush Type) 3 Sets 68. 6" Square Ultra Thin Downlight 20w Wide Beam Angle 10 Sets 69. 2- 18w Led Parabolic Louver Lights (day Light) 2 Sets 70. Entrance Cap 3/4 1 Pcs 71. Straight Connector 1 Pc 72. 6 Branches Panel Board 1 Set 73. Circuit Breaker 15 Amps (plug-in Type) 2 Pc 74. Circuit Breaker 20 Amps (plug-in Type) 1 Pcs 75. Circuit Breaker 60 Amps (plug-in Type) 1 Pcs 76. Electrical Tape (big) 5 Pcs 77. 0.90mx2.1m Flash Door W/ Jamb (pre Painted, Palmyra Green) 2 Set 78. 4"x4" Hinges 8 Set 79. Kwikset Door Knob 4 Set 80. 0.6mx6' Pvc Door W/ Complete Accessories 2 Set 81. 1.30mx4.90m White Board With Frame (for Classroom Used)(including Installation On Site) 1 Set 82. 0.60mx1.20m Jalousie Window W/ Aluminum Frame 11 Set 83. 0.60mx0.60m Awning Type Window 2 Set 84. 12mm Diameter Squareplain Bar 20 Length 85. Metal Primer (color Black) 1 Gal. 86. #6 Tox Screw 30 Pcs 87. #6 Screw 30 Pcs 88. 30cmx60cm Glazed Tiles Wall Tiles 95 Pcs 89. 30cmx60cm Unglazed Tiles Floor Tiles 25 Pcs 90. Tile Grout(white Color) 43 Kg 91. Tile Adhesive (25kg/bag) 10 Bags 92. Aluminum Tile Trim Corner 8 Length 93. Concrete Neutralizer 1 Pail 94. Acretex Primer 4 Pail 95. Acretex Top Coat (beige, Light Shade) 4 Pail 96. Acretex Top Coat (beige, Very Light Shade) 2 Pail 97. # 120 Sand Paper 30 Pcs 98. # 100 Sand Paper 30 Pcs 99. 10" Paint Roller With Pan 6 Set 100. # 2 Paint Brush 4 Pcs 101. # 4 Paint Brush 4 Pcs 102. White Flat Enamel Paint 2 Pail 103. Quick Fry Enamil Semi Gloss (foam Green Color) 2 Gal. 104. Skimcaot 8 Bags 105. Polituff (body Filler) 8 Gal. 106. 6" Putty Knife 6 Pcs 107. 19mm X 50mm X .40mm Thk X 5m Double Furring Ceiling Joist 70 Length 108. 12mm X 38mm X .80mm Thk X 5m Carrying Channel 80 Length 109. 25mm X 25mm X 3.00mm X 2.40m Wall Angle 36 Length 110. 5mm Thk Cement Board 45 Sheet 111. Wooden Airvent With Fine Mosquito Screen Fillings (.30m X 1.20m) 4 Pcs 112. W Clip For Metal Furring 368 Pcs 113. Exhaust Fan 2 Set 114. Earthfill 30 Cu.m 115. #30 Drill Bit 10 Pcs ******************************************** Total Amount Of Bid In Figures: Php _____________________________________________________ Total Amount Of Bid In Words:_________________________________________________________ For: Supply And Delivery Of Materials For The Construction Of 1 Cl Classroom At Polonuling National High School, Polonuling, Tupi, South Cotabato Place Of Delivery: Lgu-tupi, South Cotabato/mpdo Delivery Period : _____________________ Warranty : _____________________ Price Validity : _____________________ After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name/signature Tel.no./cellphone No. E-mail Address Sgd Arnen L. Kasan Mgdh-mbo Bac Chairperson
Closing Date12 Nov 2028
Tender AmountPHP 647.6 K (USD 11.1 K)

Municipality Of Bokod, Benguet Tender

Electronics Equipment...+1Electrical and Electronics
Philippines
Details: Description Republic Of The Philippines Province Of Benguet Municipality Of Bokod Office Of The Municipal Mayor Bids And Awards Committee Invitation To Bid For: Supply And Delivery Of Office Supplies (2nd Semester) (procurement By Lot: Lot 1-6) The Municipality Of Bokod, Through The Gf 2024 Intends To Apply The Sum Of: Lot No. Approved Buget Cost Lot 1 – Municipal Engineering Office P54,025.54 Lot 2 – Municipal Planning Development Office P55,129.30 Lot 3 – Municipal Agriculture Office P31,177.00 Lot 4 – Mayor’s Office P33,000.00 Lot 5 – Municipal Accounting Office P97,650.81 Lot 6 – Sangguniang Bayan Office P55,000.00 Being The Approved Budget Cost (abc) For Each Lot To Payments Under The Contract For Procurement Of Office Supplies (2nd Semester). Bids Received In Excess Of The (lot 1 – P54,025.54; Lot 2 – P55,129.30; Lot 3 – P31,177.00; Lot 4 – 33,000.00; Lot 5 – 97,650.81); And Lot 6 – 55,000.00) Shall Be Automatically Rejected At Bid Opening. 1. The Municipality Of Bokod Now Invites Bids For The Above Procurement Project, Particularly Described As Follows: Municipal Engineering Office Lot No. Qty Unit Of Issue Item Description Abc Lot 1 1 Pc Power Bank (large), 80,000mah 54,025.54 5 Packs 125 Cuts Sign Here Sticky Notes, See Through 2 Packs Batteries-aa Black, 4's (rechargeable) 5 Boxes Paper Clip, 32mm 5 Pcs Correction Tape 4 Sets Ink For Epson L3110 (black-003, Cyan-003, Magenta-003, Yellow-003) 1 Pc Drum Kit Lexmark Mx510de 1 Pc Photocopier Toner Lexmark Mx510de 5 Reams Paper, Bond, A3 (16.50" X 11.27") 10 Reams Paper, Bond, Long (216 X 330mm) 20 Reams Paper, Bond, A4-us 5 Reams Bond Paper, Short 5 Pcs Record Book, 200 Pages 1 Box Sign Pen, Black, Liquid Gel, 0.5mm Ball 1 Box Sign Pen, Blue, Liquid Gel, 0.5mm Ball 1 Box Sign Pen, Black, 0.3mm Ball 2 Packs Colored Gel Pen (7 Colors), 0.7mm Ball 6 Pcs Tape, Transparent, 1" 10 Boxes Paper Fastener, Vinyl Coated 1 Box White Board Marker, Black 5 Pcs Lc 663 Ink, Black 1 Unit Office Table, 4 Drawers (w-0.70m, L-1.20m, Top-wooden Stain) Municipal Planning And Development Office Lot No. Qty Unit Of Issue Item Description Abc Lot 2 15 Bottle Alcohol, 70% Ethyl, 500ml 55,129.30 1 Box Ballpen, Fineball, Retractable, 12's, Black 2 Pc Battery Aa, 4's 2 Pc Battery Aaa, 4's 50 Pc Brown Envelope, Short 6 Pc Correction Roller, 5mmx8m 2 Pc Computer Mouse Pad, Usb Type Flat 7 Pc Duct Tape, 2" 7 Pc Duct Tape, 1.5" 3 Pc Flash Drive, Usb, 64gb 100 Pc Folder, Long Brown 6 Pc File Rack, Double, 10" X 9.5" 6 Pc Highlighter, Assorted Colors 3 Pc Microfiber Synthetic Clean Towel 7 Pack Notepad/sticknote, 3"x 2" 8 Ream Bond Paper, Multipurpose, A4, 70 Gsm, Subs 20 (210 X 297mm) 20 Ream Bond Paper, Multipurpose, Long, 70 Gsm, Subs 20 (8.5" X 13") 7 Box Paper Clip, Vinyl Coated, B/s 50mm 7 Box Paper Clip, Vinyl Coated, S/s 33mm 5 Box Parchment Paper For Binding, Hard, Long, 10's 6 Pc Permanent Marker, Broad, Black 6 Box Plastic Paper Fastener, 50 Sets/box X 20inch Long 6 Packs Garbage Bag, Large 100 Pc Pvc Binding Cover, Transparent, Long 3 Pc Ruller, 24", Heavy Duty 1 Dozen Sign Pen, 0.5mm Ball, Liquid Gel, Black, Rectractable 1 Dozen Sign Pen, 0.5mm Ball, Liquid Gel, Blue, Rectractable 1 Box Staple Wire For Gun Tucker 10 Packs Sticker Paper, A4, 80gsm, Satin, 10's 6 Roll Tape, Transparent, 1" 7 Pack Tissue Paper, 10- Rolls/pack, 2 Ply 2 Tubes Hp Laser Jet 85a 6 Sets Epson Inks #003 (for L3100 And Epson L5190) 5 Pc Epson Inks #003 (for L3100 And Epson L5190), Black 2 Sets Epson Inks (for Printer Epson L220) 2 Tube Toner Cartridge For S1810/s2010/s2220/s2420 Municipal Agriculture Office Lot No. Qty Unit Of Issue Item Description Abc Lot 3 10 Bot Alcohol Ethyl 70% 500 Ml 31,177.00 8 Pack Battery Size Aa, Alkaline 2pc/ Packet 4 Pack Binder Clip 1 1/4 Inches X12pcs Per Pack 1 Box Business White Envelop, Long X 500pcs 1 Gallon Bleach 1 Units Calculator,15 Digits 17 Pcs Correction Tape, Pro Tip Roller .5mmx10mm 4 Pcs Dishwashing Paste, B/s 350g 1 Box Envelop, Brown Long X 500pcs 2 Pack File Folder, White,long,100 Per Pack 2 Pcs Glue All, 130g 1 Pcs Laundry Scrub Brush, B/s 4 Pcs Mosquito Killer Spray 600ml 10 Pcs Notepad Stick On, 3x3 Inches 10 Pcs Notepad Stick On 1x2 Inches 5 Box Paper Clip, B/s Vinyl Coated 5 Box Paper Clip, S/s Vinyl Coated 2 Box Pencil, Fine Point With Eraser X12 12 Pcs Record Book,200 Pages (8.5"x11") 2 Box Sign Pen-v Grip, Hi-techpoint 1.0mm Broad Black 2 Pcs Stick Broom 2 Pcs Soft Broom 3 Packs Special Paper For Certification X 50 Sheets 20 Pcs Certificate Holder, Short 20 Packs Toilet Tissue Paper 12 In One 2 Packs Photo Paper, A4 X 20 Pcs 1 Box Whiteboard Marker, Black X12 1 Box Whiteboard Marker, Blue X12 12 Ream Bondpaper, Short 12 Ream Bondpaper, A4 Mayor’s Office Lot 4 150 Reams Bond Paper, A4 33,000.00 Municipal Accounting Office Lot No. Qty Unit Of Issue Item Description Abc Lot 5 15 Pack Toilet Tissue, 12 Rolls/pack, 2 Ply, Soft& Smooth 97,650.81 3 Can Insecticide, 300ml/can, Spray 1 Box Ballpen, Retractibel, Black,12s 1 Box Ballpen, Retractibel, Blue,12s 1 Box Pen, .5 Liquid Gel Ink, Black 2 Box Pen, .5 Liquid Gel Ink, Blue 1 Box Pen, .5 Liquid Gel Ink, Violet 2 Box Pen, .3 Liquid Gel Ink, Black 10 Roll Tape, Transparent, 1" 5 Roll Tape, Packing,3" 5 Roll Tape, Masking, 1" 100 Piece Screw Fastener, 1" 100 Piece Screw Fastener, 1.5" 100 Piece Screw Fastener, 2" 100 Piece Screw Fastener, 2.5" 100 Piece Screw Fastener, 3" 6 Piece Usb,16 Gig 6 Bottle Paper White Glue,130 G 20 Box Staple Wire, #35 2 Piece Puncher, Heavy Duty,2 Holes 10 Piece File Box, W/ Cover, Legal Size, Maroon 30 Bottle Alcohol,70% , Ethyl,500ml 6 Bottle Ink For Cis Printer, Black (epson #008) 2 Set Ink For Cis Printer, Cmy (epson #008) 2 Bottle Ink For Cis Printer, Black, (brother Compatible) 2 Set Ink For Cis Printer, Set Cmy, Brother Compatible 15 Piece Correction Tape,5mmx10m 50 Piece Folder, With Slide, Short, Plastic 200 Piece Folder, Tagboard, Long, White 200 Piece Folder, Tagboard, Short, White 300 Piece Envelope, Ordinary, Legal 50 Piece Envelope, Expandable, Long 10 Pad Notepad, (3"x4"),100 Sheets/pad 12 Pad Notepad, (2"x3"),100 Sheets/pad 6 Roll Stick On, (1"), Roll, Pink/light Green 50 Ream Paper, Bond, Long,70gsm 60 Ream Paper, Bond, Short,70gsm 2 Ream Paper, Bond, A3,70gsm 5 Pack Photopaper,10s,8.5x13 Inches 5 Pack Photopaper,10s,8.5x11 Inches 1 Piece Ink Cartridge, Hp 811, Colored 3 Piece Electric Bulb,40 Watts, Led 10 Piece Self-inking Rubber Stamps 2 Roll Tape,duct, 3" Sangguniang Bayan Office Lot No. Qty Unit Of Issue Item Description Abc Lot 6 70 Reams Coupon Bond, Long, 90 Gsm 55,000.00 20 Reams Coupon Bond, A4, 90 Gsm 10 Reams Coupon Bond, Short, 90 Gsm 1 Box Folder, Long, 100’s 25 Boxes Paper Clips, Vinyl, Assorted Sizes Delivery Of The Goods Is Required In 15 Days Upon Receipt Of The Purchase Order. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act ( Ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 3. Prospective Bidders May Obtain Further Information From Bids And Awards Committee, Municipality Of Bokod, Benguet And Inspect The Bidding Documents At The Address Given Below From 8:am To 5:00pm. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 17, 2024 Onwards From The Given Address And Upon Payment Of The Applicable Fee For The Bidding Documents. For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. 5. The Municipality Of Bokod Will Hold A Pre-procurement Conference On October 25, 2024 At 9:15am Onwards At The Bids And Awards Committee Office, Poblacion, Bokod, Benguet Which Shall Be Open To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before 9:00am Of November 7, 2024. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be At 9:15am Of November 7, 2024 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidder Or Bidders’ Representatives Who Choose To Attend The Activity. 9. The Bidder, Upon Submission Of Bid, Should Provide Its Official Email Address And Contact Numbers In The Logbook Of The Bac Office. Notices Or Communications Sent Through This Email Address Or Contract Numbers Shall Be Considered Received And Acknowledged By The Bidder The Following Day The Notice/communication Was Sent By The Bac Or Procuring Entity. Hence, The Bidder Has The Obligation To Regularly Check The Aforementioned Email Address And Contact Numbers. 10. The Municipality Of Bokod Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Madona O. Yagyagen Mark Floyd W. Ambos Bac Secretariat Bac Secretariat Municipal Hall, Poblacion, Bokod, Benguet Municipal Hall, Poblacion, Bokod, Benguet E-mail Address: Baclgubokod@gmail.com E-mail Address: Baclgubokod@gmail.com Cp No. 09304019391 Cp No.09483591289 Date Of Issue: October 17, 2024 Atty. Jevan S. Mesa Name And Signature Of The Bac Chairperson
Closing Soon7 Nov 2024
Tender AmountPHP 325.9 K (USD 5.5 K)

City Of Shenov Tender

Others...+1Electrical and Electronics
Czech Republic
Details: For Part I: The subject of the contract are services consisting in ensuring the acceptance of waste from the customer and its energetic use or removal. These are wastes: • Mixed municipal waste Cat. Number 200301 • Bulky Waste Cat. Number 200307 – Similar to Mixed Municipal Waste from Households, but Mostly Larger in Size. Recyclable components (paper, plastic, bio, wood, metals, etc.) are sorted from the waste. The waste does not contain hazardous substances or hazardous waste admixtures (waste collected only at the collection yard). The Composition of This Residual Waste Corresponds to the Conditions Applicable to the Disposal of Waste in a Landfill. Waste Can Only Be Delivered To The Supplier's Stationary Facility That Has The Appropriate Regional Office Approval Authorizing The Handling Of Mixed Municipal Waste. On the part of the customer, either direct end facilities where the waste will be energetically used (zevo) or disposed of (landfill) or facilities where this waste will be transferred to larger collection facilities and then transported to energetic utilization or disposal will be accepted, according to Annex No. 1 of the Business Terms and Conditions for Part I. For Part Ii, the subject of the contract are Services Consisting in Ensuring the Acceptance of Waste - Biodegradable Waste Cat. Number 200201 - From the Customer and Its Material Use in the Supplier's Equipment, According to Annex No. 1 of the Business Terms and Conditions for Part Ii.
Closing Date20 Nov 2024
Tender AmountRefer Documents 

Department Of Education Division Of Dipolog City Tender

Electrical Goods and Equipments...+1Electrical and Electronics
Philippines
Details: Description Purchase Request Department Of Education Dipolog City Division Department: Deped, Dipolog City Pr No: Date : 10/30/2024 Section: Cid - Ims Sar. No: Date: Stock No: Unit: Item Description Quantity Estimated Total Cost Unit Cost 1 Pc/set "airpot 1.type : Water Heater 2.outer Material : Hard Plastic,(pp) Polypropylene , Heat Resistant 3.cavity Material : Stainless Steel 4.capacity : 2.5 Liters 5.voltage : 220/240 Volts 6.ac 50/60 Hz. Power In Watts: 500 To 800 Watts 7.comes With English Manual That Contains: Users Guide,list Of Parts,maintenance Guide, Safety Guide 8. The Item Must Be Branded And Good Quality." 2 2250.00 4,500.00 2 Pc/set "apron 1.type : Bib Apron 2.material : Polyester - Cotton Fabric 3.length : 20 To 24 Inches (minimum) 4.with 2 To 3 Bottom Pockets; 5.color: Any 6.the Item Must Be Of Good Quality" 4 2563.00 10,252.00 3 Pc/set "baby Bath Tub 1.material : Hard / Sturdy Plastic, (pp) Polypropylene 2.color : Any 3.dimension : ( L X W X H ) 670 To 700 Mm X 400 To 420 Mm X 160 To 190mm (minimum) 4.thickness: 3 Mm To 6 Mm (minimium) 5.the Item Must Be Of Good Quality" 2 3125.00 6,250.00 4 Pc/set "baby Blanket 1.type: Blanket 2.material: 100% Cotton 3.color: White 4.dimension : ( L X W ) 38 To 42 Inches X 28 To 32 Inches (minimum) 5.washable 6.the Item Must Be Of Good Quality." 12 986.00 11,832.00 5 Pc/set "basin (small) 1.material : Hard Plastic, (pp) Polypropylene 2.color : Any 3.dimension : 280 - 320 Mm Diameter X 80 - 120 Mm High (minimum) 4.wall Thickness : 2 Mm To 4 Mm (minimum) 5. The Item Must Be Of Good Quality." 12 899.00 10,788.00 6 Pc/set "bath Towel/towellete 1.type: Bath Towel 2.material: 100% Cotton 3.color: White 4.dimension : ( L X W ) 120 - 125 Cm X 60 - 65 Cm (minimum) 5.washable 6.the Item Must Be Of Good Quality""" 12 1200.00 14,400.00 7 Pc/set "bedpan 1.material : Hard Plastic, (ps) Polystyrene 2.color : Any Color 3.dimension : ( L X W X H ) 22 - 26 Cm X 27 - 32 Cm X 7 - 12 Cm (minimum) Approximate 4.capacity : 1 Liter (minimum) 5.thickness : 2 To 5 Mm 6.saddle-shaped And Lightweight 7. The Item Must Be Of Good Quality" 6 1000.00 6,000.00 8 Pc/set "blanket 1.type: Blanket 2.material: Cotton 3.color : White 3.dimension : ( L X W ) 80 - 90 Inches X 54 - 64 Inches Approximate 4.washable 5. The Item Must Be Of Good Quality" 12 1000.00 12,000.00 9 Pc/set "bottle Sterilizer, Electric ""1.type: Electric Steam Sterilizer 2.material: Hard Plastic ( P E ) Polyethylene Or Its Equivalent 3.color: Any Color 4.capacity: 6 Bottles (minimum) 5.sterilizes Bottle And Accessories By Steam 6.with Automatic Power Shut-off Function 7.dimensions: 8.power Supply: 220 V-240v Ac, 50/60 Hz. 9.the Item Must Be Of Good Quality """ 1 10000.00 10,000.00 10 Pc/set "bread Toaster ""1.type: Electric Bread Toaster 2.dimensions (w X D X H): 25 -30 Cm X 15 -20 Cm X 18 -22 Cm (minimum) Approximate 3.capacity: 2 Slices 4.power Supply: 220v-240v Ac, 50/60 Hz. 5. 400 To 600 W (minimum) 6.the Item Must Be Of Good Quality. """ 1 6000.00 6,000.00 11 Pc/set "burping Cloth ""1.type: Burping Cloth 2.material: 100% Cotton 3.color: Any Color 4.dimension: Length : 17 - 19 Cm Width : 14 -16 Cm (minimum) 5.washable 6. The Item Must Be Of Good Quality." 12 109.00 1,308.00 12 Set "cane ""1.type: Adjustable Offset Walking Cane 2.material : Aluminum 3.tip Size : 18 4.height Adjustment: 31 Inches To 39 Inches (with 1 Inch. Increment) 5.weight Capacity: 200 - 250 Lbs. (minimum) 6.with Rubber Handle; With Push-button Height Adjustment 7.the Item Must Be Of Good Quality""" 4 960.00 3,840.00 13 Pc/set "carpet 4 Ft. X 8 Ft. ""1.material : Polyster 2.color: Any Patterned Color 3.dimension: 48 Inches X 96 Inches (minimum) 4.the Item Must Be Of Good Quality.""" 6 2699.00 16,194.00 14 Set "china Ware ""1.material: Porcelain 2.fit To Be Used In Ovens And Microwaves 3.specific Dimensions: Dinner Plate Diameter: 10 Inches (minimum) 4.salad Plate Diameter: 7 Inches (minimum) 5.bowl Diameter: 5 Inches (minimum) 6. Mug: 12 Oz. (minimum) 7. The Item Must Be Of Good Quality 8. Set Includes: 1 Piece Dinner Plate, 1 Piece Salad Plate, 1 Piece Bowl, 1 Piece Mug""" 3 7500.00 22,500.00 15 Pc/set "clothes Brush ""1.type: Rectangular Clothes Brush 2.handle Material: Wood 3.bristle Material: Plastic Bristle 4.color: Any Color 5.overall Dimension : ( L X W X H ) 140 -160 Mm X 45 -60 Mm X 20 -30 Mm (minimum) 6.the Item Must Be Of Good Quality.""" 2 1462.00 2,924.00 16 Pc/set "clothes Hamper ""1.type: Square Hamper 2.material: Polyester 3.color: Any Color 4.dimension : (l X W X H Cm) 32 To 34 Cm X 36 To 38 Cm X 56 To 58 Cm (minimum) 5.the Item Must Be Of Good Quality""" 6 2000.00 12,000.00 17 Pc/set "clothes Rack ""1.type: Single-pole Clothes Rack 2.material: Stainless Steel 3.dimension : (l X W X H) 30 To 32 Inches X 14 To 18 Inches X 62 To 64 Inches (minimum) 4.comes With 4 Caster Wheels. 5.the Item Must Be Of Good Quality""" 4 10000.00 40,000.00 18 Pc/set "comforter ""1.type: Comforter 2.material: Polyester 3.color: Any Color 4.dimension : ( L X W ) 84 To 88 Inches X 62 To 65 Inches (minimum) 5.thickness : 20 -30 Mm ( Minimum ) 6.washable 7. The Item Must Be Of Good Quality""" 12 1600.00 19,200.00 19 Pc/set "commode ""1.type: Foldable Commode 2.durable Plastic Snap - On Seat And Lid Without Pushing Buttons 3.blue Powder -coated Steel -welded Construction 4.plastic Arms For Added Comfort 5.comes Complete With 12 Qt. Commode Bucket With Carry Handle, Cover And Splash Shield. 6.specifications: Width 18 Inches Between Arms / 22.5 Inches Outside Approximate 7.seat Dimensions : W 32 -36 Cm X D 35 -40 Cm , Height 38 -54 Cm Approximate 8. Weight 13 Lbs. , Weight Limit 350 Lbs. 9.the Item Must Be Branded And Have Good Quality""" 1 7000.00 7,000.00 20 Set "cooking Utensils ""1.material : Stainless Steel 2.the Set Is Comprised Of Ff:;1 Pc. - 16 X 9.5 Cm Sauce Pan With Glass Lid (minimum) 3.1 Pc. - 16 X 9.5 Cm Casserole With One Glass Lid, (minimum) 4.1 Pc. - 18 X 10.5 Cm Casserole With Glass Lid, (minimum) 5.1 Pc. - 20 X 11.5 Cm Casserole With Glass Lid, (minimum) 6.the Item Must Be Of Good Quality.""" 1 5000.00 5,000.00 21 Set "crutches (adjustable) ""1.type: Adjustable Crutches 2.set Includes: 3 Pcs./set 3.material: Aluminum Powder-coated 4.color : Any Color 5.weight Capacity : 300 Lbs. (minimum) 6.dimensions: Youth Size 7.user Heights: 4 Ft.6 Inches To 5 Ft. 2 Inches 8.underarm Height: 37 Inches To 46 Inches 9.adult Size: User Heights: 5 Ft. 2 Inches To 5 Ft.10 Inches 10.underarm Heights : 45 Inches To 53 Inches 11.tall Adult Size : User Heights : 5 Ft. 10 Inches 12.underarm Height : 53 Inches To 61 Inches 13.the Item Must Be Of Good Quality""" 1 8400.00 8,400.00 22 Set "cutlery ""1.material: Stainless Steel 2. 20 Pieces Set For 4 3. 4 Dinner Knives 4. 4 Dinner Forks 5. 4 Dinner Spoons 6. 4 Salad Forks 7. 4 Tea Spoons 8.the Item Must Be Of Good Quality.""" 1 1600.00 1,600.00 23 Pc/set "cutting Board, Plastic ""1.material: Polyethylene Plastic 2.color: Any Color 3.dimension : (l X W X H) 240 - 260 Mm X 140 - 160 Mm X 10 - 15 Mm (minimum) 4.reversible Cutting Surface 5. The Item Must Be Of Good Quality""" 5 1120.00 5,600.00 24 Pc/set "digital Thermometer ""1.case Material: Hard Plastic ( P E ) Polyethylene 2.color : Any Color 3.range: 32 C - 42.9 C (90.0f-109.9f) 4.accuracy: ± 0.1c 35.5c-42.0c (± 0.2 F 95.9f-107.6f) 5.baterry Operated 6.memory: Last Measuring Reading 7.alarm: Approx. 10 Seconds Sound Signal When Peak Temperature Reached. 8.the Item Must Be Of Good Quality.""" 4 359.00 1,436.00 25 Pc/set "dressing Trolley ""material: Shelves: Powder-coated Steel Sheet 2. Dimensions : ( W X D X H) 48 - 50 Cm X 48 - 50 Cm X 83 - 85 Cm (minimum) 3. Number Of Shelves: 2 4. With Four Revolving Castors, Two Lockable 5. The Item Must Be Of Good Quality""" 1 4000.00 4,000.00 26 Pc/set "electric Knife ""1.type: Electric Knife 2.material: Stainless Steel And Hard Plastic ,(pe) Polyethylene 3. Power Supply : 220/240 Volts, Ac 50/60 Hz. 4.dimensions: 4.25 X 2.75 X 11.88 Inches (minimum) 5. Comes With Touch Button Control, Safety Lock And English Users Manual. 6.comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 7.the Item Must Be Branded And Good Quality.""" 1 6000.00 6,000.00 27 Set "face Towel/towellete ""1.type: Face Towel 2.material: 100% Cotton 3.color: White 4.dimension : ( L X W ) 28 -32 Cm X 28 -32 Cm (minimum) 5.washable 6.the Item Must Be Of Good Quality""" 1 960.00 960.00 28 Set "feeding Bottle Brush (cleaning Feeding Bottles) ""1.bristle Material: Nylon 2.color: Any Color 3.handle Material: Hard Plastic, (ps) Polystyrene 4.total Length: 280 -320 Mm (minimum) 5.fit With The Standard Feeding Bottle For The Baby 6.comes With Nipple Brush 7.washable. 8. The Item Must Be Of Good Quality""" 2 1000.00 2,000.00 29 Set "feeding Utensils (child) ""1.material: Hard Plastic , (ps) Polystyrene 2.sets Inlcudes: 6 Pcs./set 3. 1 Pc. Knife 4.1 Pc. - Plate 5.1 Pc. - Bowl 6.1 Pc. - Cup 7.1 Pc. - Fork 8.1 Pc. - Spoon 9.color : Any 10.the Item Must Be Of Good Quality.""" 1 960.00 960.00 30 Set "first Aid Kit ""type: Emergency Case; Contents: First Aid Quick Reference Guide, 1pc; Sterize Gauge Swab(4 X4 X12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band -aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5cm X 5cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90cm X 90cmx 120cm, 2pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms , 2pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2- 3years Expiration, 1 Tube; Medical Tweezers Min. 8cm, Plastic, 2pcs; Plastic Bags, Resealable, Minimum Of 24pcs, 100mm X 180mm, 24pcs, 150mm X 230mm Cotton Balls , 50 Balls In A Sealed Package, 2 Packs Hot And Cold Pack, Reuseable, 1 Pack Water Resistant And Sturdy Case W/ Handle That Can Accommodate All The Listed Items.""" 1 3214.00 3,214.00 31 Pc/set "flat Sheet ""1.type: Bed Sheet 2.material: 100% Cotton 3.color: White 4.dimension: Width - 137 -145 Cm Length - 180 -200 Cm (minimum) 5.washable 6. The Item Must Be Of Good Quality.""" 12 2800.00 33,600.00 32 Pc/set "garbage Bin ""type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color Smooth And No Rough Surfaces """ 1 364.00 364.00 33 Pc/set "gloves, Rubber (15 Mils) ""medium Size(# 8) Super Nitrile, Flocklined Interior (acid/solvent Resistant) Individually Packed For Hand Protection """ 12 363.00 4,356.00 34 Box "gloves, Surgical (disposable) ""1.material: Latex 2.color: White 3.thickness: .09 Mm (minimum) 4.disposable And Sterile 5.the Item Must Be Of Good Quality""" 1 2000.00 2,000.00 35 Set "gown (hospital) ""1.type: Unisex Hospital Gown 2.material: Polyester-cotton 3.color: Any Color 4.size: One Size Fits All 5.comes With Overlap Back Closure 6.the Item Must Be Of Good Quality.""" 10 1500.00 15,000.00 36 Pc/set "grooming Kit (hairbrush Comb, Nail Cutter, Nail Brush) ""1.set Includes: 6 Pcs./set (minimum) 2.materials: Stainless Steel And Hard Plastic 3.2 Nail Clippers / Trimmers Of Different Sizes 4. 1 Multipurpose Scissors 5. 1 Ear Pick 6. 1 Tweezer 7. 1 Comb 8.the Item Must Be Of Good Quality""" 1 1200.00 1,200.00 37 Pc/set "hand Towel ""1.type: Hand Towel 2.material: 100% Cotton 3.color: Any Color 4.dimension : ( L X W ) 65 - 75 Cm X 32 - 42 Cm (minimum) 5.washable. 6.the Item Must Be Of Good Quality.""" 5 1200.00 6,000.00 38 Pc/set "high Chair/ Booster Seat/ Portable Seat ""1.material: Foldable Powder Coated Steel Frame Or Its Equivalent 2.phone Type: Corded 3.polyester Harness, Seat/back Cushion 4.overall Dimensions (l X W X H): 65 - 75 Cm X 50 - 60 Cm X 90 - 102 Cm (minimum) 5.capacity: 40 Lbs. (minimum) 6.with 3-position Seat Recline 7.the Item Must Be Of Good Quality""" 1 3500.00 3,500.00 39 Pc "hot Water Bag ""1.material: Rubber Or Its Equivalent 2.color: Any Color 3.overall Dimension : (lxw) 200 - 300 Mm X 150 - 200 Mm (minimum) 4.leak-proof And Washable. 5.the Item Must Be Of Good Quality.""" 1 800.00 800.00 40 Pc/set "kettle ""1.material: Heat-resistant Hard Plastic 2.capacity: 1 -1.5 Liters (minimum) 3.height: 25 -35 Cm (minimum) Approx. 4.voltage: 220/240 Volts, Ac 50/60 Hz. 5.power In Watts: 1000 To 1500 Watts 6.comes With Automatic Shut-off Feature And Permanent Water Level Indicator. 7.pitcher-type With Pouring. 9.comes With English Manual That Contains: Users Guide,list Of Parts,maintenance Guide, Safety Guide 8.the Item Must Be Branded And Good Quality""" 1 834.00 834.00 41 Set "measuring Cups, 1/4, 1/3, 1/2, 1 Cup Set ""1.material: Stainless Steel 2.set Includes: 4 Pcs./set; 3. 1 Pc. - 1/4 Cup (60 Ml) 4.1 Pc. - 1/3 Cup (80 Ml) 5. 1 Pc. - 1/2 Cup (125 Ml) 6. 1 Pc. - 1 Cup (250ml) 7.thickness: .5 Mm To 1 Mm (minimum) 8.the Item Must Be Of Good Quality.""" 1 1800.00 1,800.00 42 Pc/set "medical Tray ""1.type: Tray 2.material: Stainless Steel 3.dimension : ( L X W X D ) 300 - 350 Mm X 200 - 250 Mm X 12 - 19 Mm. (minimum) 4.thickness: .7 To 1 Mm (minimum) 5.the Item Must Be Of Good Quality.""" 1 504.00 504.00 43 Set "mixing Bowl, Stainless Steel, 6-piece Set ""1.material: Stainless Steel 2.quantity Of Set: 6 Pcs./set 3.dimension : 3/4 Qt., 1.5 Qt., 3 Qt., 4 Qt., 5 Qt., 8 Qt. 4.the Item Must Be Of Good Quality.""" 1 2500.00 2,500.00 44 Pc "pail, Plastic 10 Liters ""1) Material: Polyethylene Plastic 2) Dimension: 25 -30 Cm Diameter X 23 -27 Cm Depth (minimum) 3) Color: Any Color 4) Chromed Finished Handle 5) Capacity: 10 Liters (minimum) 6) Material Must Be Non-toxic 7) The Item Must Be Of Good Quality""" 4 500.00 2,000.00 45 Pc/set "pans ""1.type: Frying Pan 2.material: Stainless Steel 3.handle: With Hard Plastic Heat Insulation 4.tempered Glass Lid With Steam Hole 5.size : 23 -26 Cm With Lid 6. The Item Must Have Good Quality""" 1 4200.00 4,200.00 46 Pc/set "peeler ""1) Type : Peeler 2) Blade Material: Stainless Steel 3) Handle Material: Stainless Steel 4) Overall Dimensions : 18 X 8 Cm (minimum) 5) The Item Must Be Branded""" 10 202.00 2,020.00 47 Pc/set "pick Up Forcep ""1.type: Curved Forceps 2.material: Stainless Steel 3.overall Length: 100 -130 Mm (minimum) 4.comes With Self-locking 5.the Item Must Be Of Good Quality.""" 1 840.00 840.00 48 Pc/set "pillow ""1.material: Cotton 2.color: Any Color 3.dimensions : ( L X W ) 50 -56 Cm X 75 -80 Cm (minimum) 4.with 4 Inches Hems;washable 5.the Item Must Be Of Good Quality""" 12 616.00 7,392.00 49 Pc/set "pillow Case ""1.material: Cotton 2.color: Any Color 3.dimensions : ( L X W ) 50 -56 Cm X 75 -80 Cm (minimum) 4.with 4 Inches Hems 5. Washable 6.the Item Must Be Of Good Quality""" 12 500.00 6,000.00 50 Pc/set "portable Mixer ""1.type : Portable Mixer 2.material : Stainless Steel ,clear Acrylic 3.capacity : 16 -18 Oz. (minimum) 4.size : 170 - 220 Mm X 75 - 100 Mm 5.requires 2 Aaa Batteries 6.power In Watts: 250 To 300 Watts 7.the Item Must Be Of Good Quality.""" 1 3000.00 3,000.00 51 Pc/set "potato Masher ""1.type : Potato Masher 2.material : Stainless Steel And Hard Plastic 3.mesh Head Diameter : 70 - 90 Mm (minimum) 4.overall Length : 250 -270 Mm (minimum) 5.handle Length : 120 -140 Mm (minimum) 6.washable 7.the Item Must Be Of Good Quality""" 1 1450.00 1,450.00 52 Set "pots ""1.type: Cooking Pot 2.material: Stainless Steel 3.set Includes: 4 Pcs./set 4. 1 X Pot With Lid 5. 1 X Pan With Lid 6.1 X Strainer 7.1 X Egg Steamer 8.size : (l X W X H ) 40 To 42 Cm X 12 To 14 Cm X 26 To 28 Cm 9.the Item Must Have Good Quality""" 1 3808.00 3,808.00 53 Pc/set "skillet ""1.the Item Shall Have The Following Specifications. Material Including Handle: Cast Iron 2. Color: Any Color 3.dimension (dia. X Depth): 250 -320 Mm X 50 - 70 Mm (minimum) 4.handle Casted With The Body And Having Plastic Or Rubber Heat Insulator 5.body Thickness: 1.5 -3 Mm (minimum) 6. Washable 7. The Item Must Be Branded And Have Good Quality.""" 2 1400.00 2,800.00 54 Pc/set "sphygmomanometer ""1.type: Aneroid 2.material : Nylon Cuff And Inflation Bag, Die -cast Zinc Manometer 3..package Included : 1 X Aneroid Sphygmomanometer , 4.size : ( L X W X H Cm ) = 18 To 20 Cm X 11 To 13 Cm X 11 To 13 Cm 5.nylon Zippered Carrying Case 6.capacity: 0 To 300 Mm Hg 7.the Item Must Have Good Quality""" 1 1020.00 1,020.00 55 Pc/set "stethoscope ""1.type: Dual Head Stethoscope 2.material: Stainless Steel Chestpiece And Eartubes 3.reinforced Pvc Tubing 4.soft Pvc Eartips 5.color: Any Color 6.bell Diameter: 18-25 Mm Approx. 7.diaphragm Diameter: 25-50 Mm Approx. 8.overall Length: 66-75 Cm (minimum) 9.the Item Must Be Of Good Quality""" 3 599.00 1,797.00 56 Pc/set "urinal ""1.type: Unisex Portable Urinal 2.material: Hard Plastic, (pp) Polypropylene 3.color: Any Color 4.total Capacity: 28 Oz. Minimum 5.dimension : ( L X W X H ) 270 To 290 Mm X 145 To 160 Mm X 70 To 80 Mm (minimum) 6. Thickness : 1 Mm To 3 Mm (minimum) 7. The Item Must Be Of Good Quality.""" 4 1120.00 4,480.00 57 Pc/set "vacuum Cleaner – Heavy Duty ""1.material:plastic ( Pp) Polypropylene Or Its Equivalent 2. Color: Any Color 3.suction Power: 18 To 22 Kpa (minimum) 4.tank Capacity: 24 Liters (minimum) 5.vacuum Hose Length: 6 To 8 Ft. (minimum ) 6.power Supply: 220 V - 240 V Ac, 50/60 Hz. 7.with Accesories: Extension Wand, Utility Nozzle, Standard Paper Filter 8.comes With English Manual That Contains: Users Guide,list Of Parts,maintenance Guide, Safety Guide 9.the Item Must Be Branded And Good Quality""" 1 11200.00 11,200.00 58 Pc/set "wheel Chair ""1.type: Foldable Wheel Chair 2.overall Dimensions : (l X W X H) 40 - 44 Inches X 26 - 30 Inches X 34 - 38 Inches (minimum) 3.folded Dimensions : (l X W X H) 40 To 44 Inches X 10 To 14 Inches X 34 To 38 Inches (minimum) 4.capacity: 350 Lbs. (minimum) 5.with Padded Arm Rests; With Push-to-lock Wheel Brakes 6.the Item Must Be Of Good Quality.""" 2 9890.00 19,780.00 Total Four Hundred Thousand, Four Hundred Three Pesos Only 400,403.00 Purpose: Procurement Of Tvl Packages Of Equipment For Fcs (he) - Caregiving Nc Ii Of Dipolog City National High School (barra) Requested By: Approved By: Signature: Printed Name: Dexter A. Elumba Ma. Liza R. Tabilon Edd., Ceso V Designation: Eps - Epp/ Sptve/ Tle/ Tvl Schools Division Superintendent Date: October 30, 2024 Date:
Closing Soon11 Nov 2024
Tender AmountPHP 400.4 K (USD 6.8 K)

Province Of Iloilo Tender

Food Products
Philippines
Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Food And Venue Bid No. Ppo-24-1748-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract ……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………17 Section Viii. Checklist Of Technical And Financial Documents …………..18 Section I. Invitation To Bid Purchase Of Food And Venue Bid No. Ppo-24-1748-b 1. The Iloilo Provincial Government Through The 2024 Supplemental Budget No. 1 Intends To Apply The Sum Of Two Million Five Hundred Eighty Thousand Pesos (₱ 2,580,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Food And Venue. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By As Per Scheduled Date Of Activity. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 23, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱ 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On October 31, 2024 At The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol On Or Before November 13, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 13, 2024 At 9:01 A.m. At The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com October 21, 2024 Atty. Dennis T. Ventilacion Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Food And Venue With Bid No. Ppo-24-1748-b. The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of Two Million Five Hundred Eighty Thousand Pesos (₱ 2,580,000.00). 2.2. The Source Of Funding Is: A. Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [provincial Population Office] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To Any Venue/facility Within The City/province Of Iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Food And Venue (lunch & 1 Snack) For The Conduct Of Bspo Congress 2024 That Can Accommodate 2580 Pax In Any Venue/facility Within The City/province Of Iloilo To Be Conducted On November 18, 2024 2580 2580 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Ppo-24-1748-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Food And Venue (lunch & 1 Snack) For The Conduct Of Bspo Congress 2024 That Can Accommodate 2580 Pax In Any Venue/facility Within The City/province Of Iloilo To Be Conducted On November 18, 2024 Menu Am Snacks: Triple Decker Sandwich With Potato Chips, Bottled Water Lunch: Rice, Beef Caldereta, Fish Fillet W/ Sweet And Sour Sauce, Lumpiang Hubad, Napoleones, Soda Venue Inclusions: 1. Function Room To Accommodate 2580 Person 2. With Flowing Coffee And Water 3. Stage 4. Event Services On Standby To Assist During Set-up And Event Proper 5. Engineering Services 6. Janitorial Services 7. Generator Set (in House Lights And Acu Only) 8. Sign Stand/metal Stand 9. Podium (wood) 10. Flag Pole And Flag Stand 11. Tables And Chairs Good For 2580 Person Terms And Conditions: 1.observance Of Covid-19 Health Protocols/guidelines 2. Food Served In Bento Box ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.
Closing Soon13 Nov 2024
Tender AmountPHP 2.5 Million (USD 44.2 K)

Research Institute For Tropical Medicine, Doh Tender

Healthcare and Medicine
Corrigendum : Closing Date Modified
Philippines
Details: Description Request For Quotation Mode Of Procurement: Shopping 52.1 (b) Date: _____________ Pr No.: _____________ Rfq No.: _____________ Company/business Name: Complete Office Address: Business/mayor’s Permit No: Tin: The Research Institute For Tropical Medicine – Department Of Health, Through Its Bids And Awards Committee (bac), Intends To Procure The Below Mentioned Items Through The Above-mentioned Mode Of Procurement Based On The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Quotation Duly Signed By You, Or Your Duly Authorized Representative Within Five (5) Days Which Shall Be Addressed To The Ritm Bids And Awards Committee. A)the Following Documents Are Required To Be Submitted Along With Your Formal Quotation: Documentary Requirement Remarks Valid And Current Mayor’s/business Permit In Case Not Yet Available, You May Submit Your Expired Mayor’s Or Business Permit With The Official Receipt Of Renewal Application. However, A Copy Of The Latest Mayor’s Or Business Permit Shall Be Required To Be Submitted After Award Of Contract But Before Payment. Valid And Current Certificate Of Platinum Membership With Valid Annex “a” May Be Submitted In Lieu Of The Mayor’s/business Permit Philgeps Registration/membership Bir Form 2303 Company Name Registered In Sec/dti/cda Must Be The Same Registered Name In Bir Form 2303. Note: Incomplete Submission Of The Required Documents Will Be A Ground For Disqualification. For Any Clarification, You May Contact Us At The Contact Information Provided: Mae Marie E. Hernandez Bac Secretariat Head (632) 8807-2628 To 32 Loc. 210 And/or 240 E-mail Address: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph Website: Www.ritm.gov.ph Instructions: Note: Failure To Follow These Instructions Will Disqualify Your Entire Quotation. (1)do Not Alter The Contents Of This Form In Any Way. (2)the Use Of This Rfq Is Highly Encouraged To Minimize Errors Or Omissions Of The Required Mandatory Provisions. If Another Form Is Used Other Than The Latest Rfq, The Quotation Shall Contain All The Mandatory Requirements/provisions Including Manifestation On The Agreement With The Terms And Conditions Below. (3)all Technical Specifications Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/disqualified. (4)quotations May Be Submitted Through Electronic Mail At: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph. (5)quotations, Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. For Quotations Submitted Via Electronic Mail, The Date And Time Of Receipt Indicated In The Email Shall Be Considered. Terms And Conditions: bidders Shall Provide Correct And Accurate Information Required In This Form. any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. price Quotation/s, To Be Denominated In Philippine Peso, Shall Include All Taxes, Duties, And/or Levies Payable – If Applicable. quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. in Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Ritm-bac Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. payment Shall Be Made After Delivery And Upon The Submission Of The Required Supporting Documents, I.e., Order Slip And/or Billing Statement, By The Supplier, Contractor, Or Consultant. Our Government Servicing Bank, I.e., The Land Bank Of The Philippines, Shall Credit The Amount Due To The Identified Bank Account Of The Supplier, Contractor, Or Consultant Not Earlier Than Twenty-four (24) Hours, But Not Later Than Forty-eight (48) Hours, Upon Receipt Of Our Advice. Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Ritm May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Available To The Procuring Entity. Technical Offer/proposal: After Having Carefully Read And Accepted The Instructions And Terms And Conditions, I/we Submit Our Technical Proposals/quotations For The Item/s As Follows: Item # Qty/ Unit Item Description Supplier’s Compliance (indicate Brand And/or Model, Including Complete Specifications To Be Offered - Applicable) 1 1,522/piece Ballpen, Ballpoint Pen, 1.5mm Tip, Retractable, Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2 30/piece Binder, 2-ring, 1.5ins, Black, Transparent, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3 134/piece Binder, 3-ring, A4 Size, 1.5" General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4 18/piece Binder, 3-ring, Legal Size, 1" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 5 22/piece Binder, 3-ring, Legal Size, 2" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6 38/piece Binder, D-ring, 3 Hole, A4 Size, Hardbound, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7 48/piece Board, Clipboard, With Metal Clip, Vinyl, A4 Size General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8 1/pack Card, Pvc, White, Iso R-80 (54mm X 86 Mm) 100 Sheets /pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 9 385/pack Clear Book Refill, A4, 10 Sheets Per Pack, International Punching 11 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 10 10/box Clear Book Refill, For 3-hole Ring Binder, A4 Size, 100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 11 48/pack Clear Book Refill, Long, 10 Sheets Per Pack, International Punching 25 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 12 470/pack Clear Sheet, For 3 Hole Ring Binder, A4 Size,10 Sheets Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13 104/box Clip, Backfold, All Metal, Clamping: 12mm (-1mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 14 2/piece Cork Board, With Aluminum Frame (24" X 36") Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 15 30/piece Data File Box, Made Of Chipboard, Black, 5'' X 9'' General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16 232/roll Double Sided Tape, Adhesive, 1/4" Wide General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 17 5/roll Film, Film For Id - Hdp5000 Film, 1500 Counts General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 18 120/piece Folder, Archfile, 2 Holes, A4, 3'' Thickness, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19 20/piece Folder, Clear, Transparent Folder With Slide, A4 Size (210mm X 297mm), Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 20 20/piece Folder, Legal Size (216mm X 330mm),transparent Folder With Slide, Clear, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 21 27/pack Folder, Tagboard, For A4 Size Documents, 100/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 22 1/piece Glue Gun, Heavy Duty With High And Low Dual Temperature Settings, 220 Volts, 60 Hertz, 40 Watts, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 23 7/piece Glue Gun, Hot Melt, 20-60watts, Cordless, Rechargeable, For Glue Stick Big General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 24 120/piece Glue Stick, For Hot Melt Glue Gun General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 25 30/box Hanging Folders, Poly-reinforced Top Edge And Bottom Fold Provide Added Durability Standard Green Legal-sized Hanging Folders Lighter Interior Helps Prevent Time-wasting Misfiles Includes A Printable Label Sheet And 25 Clear 1/5-cut Tabs Product Dimensions - 16 X 9.65 X 2.5 Inches (40.6 X 24.5 X 6.4 Cm) Paper Type Material, 25pcs/box, Box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 26 40/piece Id Case, Holder, With Lace, Plastic, Vertical, (id Case: 6cm X 10cm / Lace: 1/2" X 20") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 27 300/set Id Case, Retractable With Horizontal Id Badge Holder (66mm X 98mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 28 20/piece Id Clip, Suitable For Id Jacket Size 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 29 60/piece Id Jacket, Clear Type, Size: 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 30 5/piece Illustration Board, 760mm X 1000mm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 31 12/box Laminating Film, 222mm X 286mm, 250 Micron, 100 Sheets/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 32 11/box Laminating Film, A3 Size, 250 Micron,100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 33 59/pack Laminating Film, A4 Size, 125 Micron, 25 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 34 54/pack Laminating Film, A4 Size, 250 Micron, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 35 186/piece Magazine File Box, Large Size, Made Of Chipboard General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 36 79/piece Marker Pen Type, Fade And Water-resistant, Quick-drying, Ap Certified Non-toxic Formula, Ultra-fine Point, 0.05mm, Black, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 37 5/pack Marker, Glassboard Marker, 4 Pcs Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 38 110/pad Note Pad, Stick On, Lined, Yellow, 152.4mm X 101.6mm (6" X 4") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 39 1/case Notebook, Spiral, Color: White, Cleanroom Spiral Notebook, 5.5'' X 8.5'', (140mm X 216mm), 50 Pcs/case General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 40 20/pack Onion Skin , Size: A4, 50 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 41 2/piece Organizer, Desk , Stainless Steel , (size: H:5" X W:5.5" X L:8.7", Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 42 2/piece Paper Cutter, Wooden, Brown, B5 Size (17.6cm X 25.0cm), Easy Adjustment For Cutting Desires With Secured Sliding Paper Size Marker General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 43 50/pack Paper Sticker, High-gloss, 8.5 X 11'', Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 44 110/pack Paper Sticker, Matte, A4 Size, Green, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 45 10/pack Paper Sticker, Matte, Blue, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 46 10/pack Paper Sticker, Matte, Indigo, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 47 10/pack Paper Sticker, Matte, Orange, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 48 10/pack Paper Sticker, Matte, Pink, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 49 10/pack Paper Sticker, Matte, Red, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 50 35/pack Paper Sticker, Matte, Yellow, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 51 13/pack Photo Paper, Matte, Size: A4, 146gsm, 100 Sheets/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 52 20/pack Photo Paper, Photo, A3 Size, High Gloss, 230 Gsm, 20 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 53 50/ream Photocopy Paper, Letter Size 8.5x11'', 80gsm Substance 24, Ream General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 54 1/roll Plastic Cover, Transparent, Gauge 15 Hard (thickness), 48 X 50 Yards Per Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 55 10/roll Property Tag, Polyester Labels, Color Solid Green, Pre-printed, 3.5" X 3.5", Non-erasable, Non-tearable, Waterproof, Can Stand For Hot And Cold Temp, Luding Resin Ribbon, 102mm X 75m For Gc420t Printer, Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 56 6/roll Property Tag, Polyester Labels, Color White, Pre-printed, 2" X 1", Non-erasable, Non-tearable, Strong Adhesive Can Stand For Hot And Cold Temp, Including Resin Ribbon 56mm X 75m, 2500 Pieces/roll *item Must Be Compatible With Gc420t Printer. General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 57 138/piece Record Book, 150 Pages, Size: 214mm X 278mm Min General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 58 4/bundle Ring Binder, 84 Rings, Plastic, 64mm X 1.2m, 10 Pieces/bundle General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 59 332/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Blue General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 60 60/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Red General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. Financial Offer/proposal: Please Quote Your Best Offer For The Item/s Below. Please Do Not Leave Any Blank Items. Indicate “0” If Item Being Offered Is For Free: Item # Qty/ Unit Item Description Abc Price Proposal Unit Cost Price Proposal Total Cost 1 1,522/piece Ballpen, Ballpoint Pen, 1.5mm Tip, Retractable, Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 25,874.00 2 30/piece Binder, 2-ring, 1.5ins, Black, Transparent, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4,539.30 3 134/piece Binder, 3-ring, A4 Size, 1.5" General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16,750.00 4 18/piece Binder, 3-ring, Legal Size, 1" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,944.00 5 22/piece Binder, 3-ring, Legal Size, 2" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,190.00 6 38/piece Binder, D-ring, 3 Hole, A4 Size, Hardbound, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,251.32 7 48/piece Board, Clipboard, With Metal Clip, Vinyl, A4 Size General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,400.00 8 1/pack Card, Pvc, White, Iso R-80 (54mm X 86 Mm) 100 Sheets /pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,210.00 9 385/pack Clear Book Refill, A4, 10 Sheets Per Pack, International Punching 11 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,700.00 10 10/box Clear Book Refill, For 3-hole Ring Binder, A4 Size, 100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,829.80 11 48/pack Clear Book Refill, Long, 10 Sheets Per Pack, International Punching 25 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 936.00 12 470/pack Clear Sheet, For 3 Hole Ring Binder, A4 Size,10 Sheets Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16,450.00 13 104/box Clip, Backfold, All Metal, Clamping: 12mm (-1mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,687.92 14 2/piece Cork Board, With Aluminum Frame (24" X 36") Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,440.00 15 30/piece Data File Box, Made Of Chipboard, Black, 5'' X 9'' General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,802.30 16 232/roll Double Sided Tape, Adhesive, 1/4" Wide General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 15,080.00 17 5/roll Film, Film For Id - Hdp5000 Film, 1500 Counts General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 94,170.00 18 120/piece Folder, Archfile, 2 Holes, A4, 3'' Thickness, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 10,200.00 19 20/piece Folder, Clear, Transparent Folder With Slide, A4 Size (210mm X 297mm), Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 180.00 20 20/piece Folder, Legal Size (216mm X 330mm),transparent Folder With Slide, Clear, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 200.00 21 27/pack Folder, Tagboard, For A4 Size Documents, 100/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,286.30 22 1/piece Glue Gun, Heavy Duty With High And Low Dual Temperature Settings, 220 Volts, 60 Hertz, 40 Watts, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 924.00 23 7/piece Glue Gun, Hot Melt, 20-60watts, Cordless, Rechargeable, For Glue Stick Big General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4,200.00 24 120/piece Glue Stick, For Hot Melt Glue Gun General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 840.00 25 30/box Hanging Folders, Poly-reinforced Top Edge And Bottom Fold Provide Added Durability Standard Green Legal-sized Hanging Folders Lighter Interior Helps Prevent Time-wasting Misfiles Includes A Printable Label Sheet And 25 Clear 1/5-cut Tabs Product Dimensions - 16 X 9.65 X 2.5 Inches (40.6 X 24.5 X 6.4 Cm) Paper Type Material, 25pcs/box, Box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 28,500.00 26 40/piece Id Case, Holder, With Lace, Plastic, Vertical, (id Case: 6cm X 10cm / Lace: 1/2" X 20") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,760.00 27 300/set Id Case, Retractable With Horizontal Id Badge Holder (66mm X 98mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13,098.00 28 20/piece Id Clip, Suitable For Id Jacket Size 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 194.00 29 60/piece Id Jacket, Clear Type, Size: 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,855.80 30 5/piece Illustration Board, 760mm X 1000mm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 346.50 31 12/box Laminating Film, 222mm X 286mm, 250 Micron, 100 Sheets/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 11,820.00 32 11/box Laminating Film, A3 Size, 250 Micron,100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19,580.00 33 59/pack Laminating Film, A4 Size, 125 Micron, 25 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,850.00 34 54/pack Laminating Film, A4 Size, 250 Micron, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,020.00 35 186/piece Magazine File Box, Large Size, Made Of Chipboard General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,511.36 36 79/piece Marker Pen Type, Fade And Water-resistant, Quick-drying, Ap Certified Non-toxic Formula, Ultra-fine Point, 0.05mm, Black, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 9,124.50 37 5/pack Marker, Glassboard Marker, 4 Pcs Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,000.00 38 110/pad Note Pad, Stick On, Lined, Yellow, 152.4mm X 101.6mm (6" X 4") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19,324.80 39 1/case Notebook, Spiral, Color: White, Cleanroom Spiral Notebook, 5.5'' X 8.5'', (140mm X 216mm), 50 Pcs/case General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 34,715.00 40 20/pack Onion Skin , Size: A4, 50 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,465.00 41 2/piece Organizer, Desk , Stainless Steel , (size: H:5" X W:5.5" X L:8.7", Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,300.00 42 2/piece Paper Cutter, Wooden, Brown, B5 Size (17.6cm X 25.0cm), Easy Adjustment For Cutting Desires With Secured Sliding Paper Size Marker General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,424.00 43 50/pack Paper Sticker, High-gloss, 8.5 X 11'', Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,599.00 44 110/pack Paper Sticker, Matte, A4 Size, Green, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6,050.00 45 10/pack Paper Sticker, Matte, Blue, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 46 10/pack Paper Sticker, Matte, Indigo, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 47 10/pack Paper Sticker, Matte, Orange, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 48 10/pack Paper Sticker, Matte, Pink, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 49 10/pack Paper Sticker, Matte, Red, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 50 35/pack Paper Sticker, Matte, Yellow, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,925.00 51 13/pack Photo Paper, Matte, Size: A4, 146gsm, 100 Sheets/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,150.00 52 20/pack Photo Paper, Photo, A3 Size, High Gloss, 230 Gsm, 20 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,420.00 53 50/ream Photocopy Paper, Letter Size 8.5x11'', 80gsm Substance 24, Ream General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,500.00 54 1/roll Plastic Cover, Transparent, Gauge 15 Hard (thickness), 48 X 50 Yards Per Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,750.00 55 10/roll Property Tag, Polyester Labels, Color Solid Green, Pre-printed, 3.5" X 3.5", Non-erasable, Non-tearable, Waterproof, Can Stand For Hot And Cold Temp, Luding Resin Ribbon, 102mm X 75m For Gc420t Printer, Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 90,090.00 56 6/roll Property Tag, Polyester Labels, Color White, Pre-printed, 2" X 1", Non-erasable, Non-tearable, Strong Adhesive Can Stand For Hot And Cold Temp, Including Resin Ribbon 56mm X 75m, 2500 Pieces/roll *item Must Be Compatible With Gc420t Printer. General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 17,532.90 57 138/piece Record Book, 150 Pages, Size: 214mm X 278mm Min General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6,486.00 58 4/bundle Ring Binder, 84 Rings, Plastic, 64mm X 1.2m, 10 Pieces/bundle General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 751.92 59 332/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Blue General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13,270.04 60 60/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Red General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,398.20 Delivery Period:30 Working Days Total Offered Quotation In Words: ______________ In Figures: ______________ Price Validity: ________________ Payment Terms: Thirty (30) Calendar Days Payment Details: Banking Institution: _________________________________________________ Account Number: __________________________________________________ Account Name: _________________________________________________ Branch: _________________________________________________ Note: Only The Actual Amount Of The Accepted Items Shall Be Paid. ___________________________ Signature Over Printed Name Of Authorized Representative ___________________________ Position/designation ___________________________ Office Telephone/fax/mobile Nos. ___________________________ Email Address/es
Closing Soon11 Nov 2024
Tender AmountPHP 577.6 K (USD 9.9 K)

University Of The Philippines Tender

Healthcare and Medicine
Philippines
Details: Description Supply Of Various Simulation Equipment For Clinical Simulation Laboratory Pelvic Simulator With Virtual System Specifications ● Enhance Knowledge Of Pelvic Anatomy And Acquire The Comprehensive Skills Required To Accurately Perform Pelvic Exams ● Combines A Physical Mannequin With A Computerized 3d Virtual System ● Sensors Are Placed On The Trainee’s Fingers Which Are Used In Conjunction With The Mannequin And 3d Virtual Model ● Provides Real-time Indication Of Finger Palpation, Downward Press On The Abdomen And Cervix Manipulation ● Interchangeable Anatomies Are Easily Replaced To Represent Normal And Pathological Anatomical Structures ● Comes With A Height-adjustable Cart ● Curriculum Videos Included For Online Learning And Self-instruction ● Self-learning With Skill And Procedural Tasks ● Anatomical Labeling, Organ Recognition System ● Palpation Or Movement Is Reflected To Provide A True-to-life Image Of Internal Pelvic Actions ● Anatomical Software Customization: Allows Learner To Choose The Anatomies And Content To Be Included In The Training Or Testing Session ● Performance Reports/ Metrics At The End Of Each Training Session Allow The Learner And The Trainer To Review Practice Results Components: ● All-in-one Computer ● Mannequin ● Platform Base ● Finger Sensors ● Speculum And Interchangeable Pap Test Tool (interchangeable Pap Test Tool Includes Cytobrush And Cervical Broom) ● 6 Interchangeable Anatomical Units (normal Uterus, Ovarian Cyst, Multiparous Uterus, Large Fibroid, Ectopic Pregnancy, And Retroflexed Uterus) ● Control Unit ● Wireless Keyboard And Mouse ● Foot Pedal Display Cart Components: ● Computer Tray ● Keyboard And Mouse Tray ● Rotating Mannequin Table ● Table-height Adjustment Mechanism ● Control Unit Tray Simulation Processing Unit: ● Computer ● Windows Os-based ● At Least 22” Touch Screen Physical Dimensions: ● Platform Size: At Least 20.8”(l) X 18.8”(d) X 5.8”(h) ● Control Unit: At Least 15”(l) X 9.5”(d) X 4.8”(h) Electrical And Environmental Characteristics: ● 100-240 V~, 50/60 Hz, 3.2a ● Operation Temperature: Range 10-30°c ● Relative Humidity: Maximum 90%: ● Cloud Web-based Management System ● User Friendly Simulator And Curricula Administration ● Customize And Design Courses And Curricula ● Allows Learner Progress Monitoring And Setting Training Goals Modules: 1. Anatomical Recognition ● In The Module, The User Palpates The Anatomical Mannequin The Same Way It Is Done When Performing Pelvic Procedures On Live Patients ● The Realistic Physical Mannequin Provides The Trainee With A Very Accurate And True-to-life Palpation Sensation ● Customization Allows The Course Director To Choose The Relevant Anatomies And Content To Be Included In The Training Session ● Consists Of At Least Two (2) Modes: Anatomical Recognition Practice Mode And Anatomical Recognition Test Mode 2. Pelvic Exam ● Provided With Interchangeable Anatomies That Represent Different Exam Types ● These Anatomies Enable Trainees To Virtually Encounter And Learn Various Pelvic Conditions Before They Perform The Exam On A Live Patient ● Trainees Gain The Ability To Recognize Normal And Abnormal Gynecological Findings And Practice Using The Proper Techniques To Perform Pelvic Exams ● Dynamic Anatomical Behavior: The Palpated Organs In The Virtual Model On The Screen Move In Synchronization With The Mannequin, Allowing The Learner To Receive Real-time Feedback On Movements Inside The Pelvic Cavity ● Consists Of At Least Two (2) Modes: Pelvic Exam Practice Mode And Pelvic Exam Test Mode 3. Speculum Examination And Pap Test ● Includes A Self-guided Step-by-step And A Test Case For Cervix Examination Using A Speculum And Perform A Pap Test ● Use True-to-life Speculum And Pap Test Tools Including A Cytobrush And A Cervical Broom ● Connected To A Virtual Model, Trainee Can Track Patient Discomfort During Examination, Accuracy Of Tools Position And Receive Feedback Through The Performance Report ● Visualization Of Speculum And Pap Smear Tools In Virtual Anatomical Model Assist In Orientation ● Dynamic Anatomical Behavior: Vaginal Movement Is Reflected To Provide A True-to-life Image Of Internal Pelvic Actions Adult Auscultation Training Simulator Specifications For Training Different Heart, Lung And Bowel Sounds. The Sounds Library Conforms To American Thoracic Society Guidelines. ● At Least 35 Heart, 18 Lung And 12 Abdomen Sounds ● Anterior And Posterior Auscultation Points ● All Auscultation Points Light Up ● Transmit Sounds To External Speakers ● Compatible With A Real Stethoscope Challenge Assessment Skills From Clear Clinical Findings To Detecting Faint Murmurs. The Flexible Operating Tablet Allows You To: ● Activate Or Deactivate Auscultation Points And Backlighting Individually ● Adjust Volume And Intensity Of Sounds ● Change Hr And Rr For A Sound That Is Currently Being Reproduced ● Compare Sound Recordings ● Sound Matches Ecg Diagrams And Other Vital Parameters Cardiac Auscultation 1. Normal Heart Sound 2. Split First Heart Sound 3. Split Second Heart Sound 4. Third Heart Sound (gallop) 5. Fourth Heart Sound (gallop) 6. Functional Murmur 7. Diastolic Murmur 8. Opening Snap 9. Holosystolic Murmur 10. Early Systolic Murmur 11. Mid-systolic Murmur 12. Continuous Murmur 13. Austin Flint Murmur 14. Pericardial Rub 15. Graham Steel Murmur 16. Aortic Valve Regurgitation 17. Aortic Valve Stenosis 18. Aortic Stenosis And Regurgitation 19. Congenital Aortic Stenosis 20. Mitral Valve Regurgitation 21. Mitral Valve Stenosis 22. Mitral Valve Prolapse 23. Pulmonary Valve Stenosis 24. Pulmonary Valve Regurgitation 25. Tricuspid Valve Regurgitation 26. Coarctation Of The Aorta 27. Hypertrophic Cardiomyopathy 28. Patent Ductus Arteriosus 29. Atrial Septal Defect 30. Ventricular Septal Defect 31. Acute Myocardial Infarction 32. Congestive Heart Failure 33. Systemic Hypertension 34. Acute Pericarditis 35. Dilated Cardiomyopathy Auscultation Of Lungs 1. Bronchial Breath Sounds 2. Bronchovesicular Sounds 3. Vesicular Breath Sounds 4. Diminished Vesicular Breath Sounds 5. Coarse Crackles 6. Fine Crackles 7. Wheezes 8. Rhonchi 9. Gurgling Rales 10. Stridor 11. Pleural Friction Rub 12. Cavernous Breath Sound 13. Abnormal Harsh Bronchovesicular Breath Sounds 14. Asthma 15. Covid-19 16. Left-sided Pneumothorax 17. Right-sided Pneumothorax 18. Pneumonia Abdomen Auscultation 1. Normal Bowel Sound 2. Hyperactive Sounds 3. Hypoactive Sounds 4. Borborygmus 5. Capotement 6. Peritoneal Friction Rub 7. Normal Bowel Sound With Bruits 8. Irritable Bowel Syndrome 9. Diarrhea 10. Ulcerative Colitis 11. Crohn’s Disease 12. Functional Intestinal Obstruction 13. Paralytic Ileus Bluetooth Compatible Adult Full-body Resuscitation Manikin Specifications A Full-body Cpr Manikin With A Rechargeable Battery, Designed To Represent A Standard Adult Cardiac Arrest Patient (in Terms Of Required Chest Compression Force). It Simulates An Adult Of Average Physiology And Is Designed For Realistic Training In Basic Life Support Techniques Following International Recommendations. ● High-performance Cpr Training For Professional First Responders ● The Airway (aw) Head Is Designed For Supraglottic (sg) Intubation Supporting The Protocol For Doing Endotracheal (et Or Eti) Intubation In A Resuscitation Team Training Setting ● The Aed Skin Includes A Connector To Real And Simulated Aed Trainers, Enabling Aed Trainings In A Resuscitation Team Training Setting ● Enables Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback To: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief ● Multiple Chest Stiffnesses With Qcpr Feedback Device Includes: ● Full Body Manikin With Rechargeable Battery (1) ● Trolley Bag (1) ● 45kg Compression Spring Installed (1) ● 2 Extra Compression Springs (30kg And 60kg) (1) ● Training Pads Multi (1) ● Manikin Wipes Pkg (4) ● Important Product Information (1) ● User Guide (1) ● Airway Assemblies (2) ● Usb A-c (1) ● Ac Power Adapter Usb 2a (1) Bluetooth Compatible Child Full-body Resuscitation Manikin Specifications A Professional-grade Pediatric Cpr Manikin Designed To Represent A 5–6-year-old Boy, Which Enables Professional First Responders To Practice Cpr Skills And High-performance Team Training. The Manikin Is Bluetooth Enabled For Qcpr Feedback Device. ● Enables Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback To: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief With Qcpr Feedback Device Includes: ● Full-body Manikin With Jacket And Shorts ● Soft Carry Case That Doubles As Training Mat ● Pulse Bulb ● Manikin Wipes ● Face Masks ● At Least 2 Junior Airways ● Product Information ● User Guide ● At Least 2 Airway Assemblies, Usb A-c ● Ac Power Adapter Usb 2a ● 4 Aa Size Batteries Bluetooth Compatible Infant Full-body Resuscitation Manikin Specifications A Professional-grade Infant Cpr Manikin Designed To Represent A 3-month-old Baby, Which Enables Professional First Responders To Practice Cpr Skills And High-performance Team Training. The Manikin Is Bluetooth Enabled For Qcpr Feedback Devices. ● Facilitates Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback For: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief With Qcpr Feedback Device Includes: ● Full-body Manikin With Onesie Clothing And Rechargeable Battery ● Carry Case 20 L ● Pulse Bulb ● At Least 5 Disposable Airways ● 2 Baby Standard Head Face Skins ● Manikin Wipes ● Baby Blanket ● Qcpr Armband ● Product Information ● User Guide ● At Least 2 Airway Assemblies ● Usb A-c ● Ac Power Adapter Usb 2a Blood Pressure Measurement Trainer Specifications Lifelike, Adult Arm With An Electronic Trainer Designed For Training The Procedure Of Nibp Measurement. ● Palpable Antecubital Pulse ● Blood Pressure Trainer With Lcd Guided Operation ● Systolic, Diastolic, Heart Rate And Auscultatory Gap Are Programmable ● Representation Of Both Systolic And Diastolic Pressures ● Indication Of Gauge Reading As Pressure Is Increased Or Decreased ● Adjustable Volume Adult Airway Management Trainer Specifications ● Manually Inflatable Tongue To Simulate Obstructed Airway Or Tongue Edema ● Anatomically Correct Internal Anatomy Facilitates Airway Management Skills Using Manual Maneuvers And Mechanical Devices ○ Updated Airway Allows For Insertion Of Standard Airway Devices With The Addition Of The Lma, Combitube And King Lt ○ Oropharyngeal And Nasopharyngeal Airway Insertion ○ Endotracheal And Right Mainstem Intubation ○ Needle Or Surgical Cricothyrotomy ○ Retrograde Intubation ○ Bag-valve-mask Ventilation ○ Tracheal Suctioning Pediatric Airway Management Trainer Specifications ● Anatomically Accurate Airway ● Pediatric Torso ● Oropharyngeal And Nasopharyngeal Airway Insertion ● Endotracheal Tube Insertion And Securing ● Bag-valve Mask Ventilation ● Tracheal Suctioning ● Manually Generated Carotid Pulse ● Closed Chest Compressions Includes: ● 1 Pediatric Torso Trainer ● 1 Can Of Manikin Lubricant ● 1 Carry Case ● Directions For Use Infant Airway Management Trainer Specifications Realistic Anatomy Of A Three-month-old Infant For Teaching And Practicing Basic And Advanced Airway Management Skills. ● Realistic Representation Of Human Anatomy, Tissue, And Skin Material ● Allows Students To Undertake Training That Is Directly Transferable To The Clinical Setting ● Minimal Maintenance And Robust Design Enable Cost Effective Training ● A Base Plate Mount Allows Stable Practicing Conditions And Easy Transportation ● The Cover Prevents Dust From Coming Into Contact With The Head During Storage Product Features: ● Realistic Anatomy Of The Tongue, Oropharynx, Epiglottis, Larynx, Vocal Cords, And Trachea ● Practicing Of Oral And Nasal Intubation ● Practicing Use Of Lma (laryngeal Mask Airway) ● Correct Tube Placement Can Be Checked By Practical Inflation Test ● Bag-valve-mask Ventilation Can Be Practiced ● Sellick Maneuver Can Be Performed ● Stomach Inflation ● Realistic Tissue Simulation Leopold’s Maneuvers Task Trainer Specifications Comprehensive Maternal Body Set For Skills Training In Labor And Delivery. Combination Of Modules Offer A Variety Of Skills Training Features ● Realistic Reproduction Of The Birth Canal Allows For Pelvic Examination In Accordance With The Progress Of Delivery. ● The Ability To Perform Various Techniques (mcroberts Position, Woods Screw Method, Etc.) In Fetal Malposition And Shoulder Dystocia. Training Skills / Applications ● Delivery ● Pelvic Examination ● Normal Delivery ● Delivery Of Placenta And Umbilical Cord ● Reproduction And Handling Of Shoulder Dystocia And Fetal Malposition ● Vacuum Extraction ● Forceps Delivery ● Breech Delivery ● Delivery Of The Placenta ● Treatment Of The Fetus ● Umbilical Cord Entanglement ● Umbilical Cord Clamping And Cutting ● Palpation Of The Anterior/posterior Fontanels ● Suctioning Procedures Through Mouth And Nose Set Includes At Least The Following ● 1 Maternal Body ● 1 Skin Cover ● 2 Clamps ● 1 Fetus ● 1 Placenta ● 1 Umbilical Cord ● 3 Umbilical Cords For Omphalotomy ● 5 Velamen Sheets ● 1 Lubricant ● 1 Bottle For Lubricant ● 1 Talcum Powder ● 1 Towel ● 1 Instruction Manual Wound Care Task Trainer – Leg Specifications Wound Care Task Trainer Molded From An Actual Patient For True-to-life Realism. The Following Conditions* Are Presented: ● Venous Ulcers ● Cellulitis ● Stasis Dermatitis ● Varicose Veins ● Hemosiderin Staining Vasculitis ● Lipodermatosclerosis ● Calciphylaxis ● Pyoderma Grangrenosum ● Healed Foot Ulcer ● Fungal Thickened Toenails ● Maceration ● Diabetic Ulcer ● Atrophie Blanche ● Pitting Edema ● Reticular And Telangiectasia Veins. The Top Of The Leg Model Has A Unique Molded-in Swivel Fixture That Permits The Leg To Be Rotated A Full 360 Degrees For Easy Visualization. Wounds Associated With Venous Disease And Other Wounds On The Lower Leg And Foot Are Often Extremely Painful For The Patient, Thus Adding Urgency To Their Effective And Efficient Identification And Treatment. Includes A Display Stand Which Permits The Trainer To Pivot From Above The Knee And Rotate 360 Degrees, Providing A Realistic Experience In Supporting The Leg While Practicing Compression Wrapping, Dressing Changes Or Identifying Conditions In A Teaching Situation. Pediatric Iv Training Hand Specifications Set Of Pediatric Hands For Practicing Iv Features 1. Fingers And Dorsum Of Hand Are Flexible, Able To Be Gripped, And Repositionable As In Real-life Procedures 2. Two Puncture Sites On The Back Of The Hand 3. Practice Dressing And Securing The Cannula Training Skills / Applications ● Pediatric Dorsal Veins Injection ● Blood Collection ● Intravenous Infusion Set Includes: ● 2 Injection Arm-hands (one-year-old) ● 2 Injection Arm-hands (three-year-old) ● 2 Stands ● 1 Circulation Pump ● 10 Cotton Swabs ● 1 Spoon ● 1 Plastic Jar ● 1 Plastic Beaker ● 1 Storage Case ● 1 Instruction Manual Pediatric Iv Training Arm Specifications Lifelike Pediatric Arm Reproduction With Replaceable Skin And Multi-vein System Designed For Peripheral Intravenous Therapy. ● Venipuncture Possible In The Antecubital Fossa And Dorsum Of The Hand ● Accessible Veins Include Median, Basilic And Cephalic ● Arm Will Articulate To Pediatric Manikins And Task Trainers Kit Includes: ● 1 Pediatric Iv Arm - Right ● 1 Replacement Skin And Multi-vein System ● 1 Bottle Red Simulated Blood, ● 1 Can Of Manikin Lubricant ● 1 Blood Bag With Tubing And Connector ● 1 Clamp And Hook ● 1 Set Of Shoulder Attachment Hardware Pediatric Clinical Skills Trainer (for Ngt/ogt, Catheterization, Iv Insertion) ● Realistically Representing At Least, A Six-year-old Child For Skill And Scenario-based Training Of The Care And Management Of A Variety Of Pediatric Patients. For Clinical Training Of Common And Uncommon In-hospital Pediatric Patients Including Wound Assessment And Care, First Aid, And Child Abuse Training. ● Provides Training Targeting Key Skills Specific To Pediatric Care Providers. Designed To Meet The Training Requirements For Pediatric Patient Care And Helps Facilitate Delivery Of Consistent Simulations Into Nursing Curriculums. Features: 1. Articulating Iv Arm Allows For Practice Of Iv Cannulation, Medication Administration And Site Care And Maintenance. Venipuncture Possible In The Antecubital Fossa And Dorsum Of The Hand. Accessible Veins Include Median, Basilic And Cephalic. 2. Interchangeable Male And Female Genitalia Allow For Complete Urinary Catheterization. Enema Procedures May Also Be Performed. 3. Head With Anatomical Landmarks, Trachea, And Esophagus Along With Simulated Lungs And Stomach Allow The Practice Of Many Procedures, Including Ng, Og, Tracheal Care And Suctioning, And Insertion, Securing And Care Of Endotracheal Tubes. Arterial Blood Extraction Trainer Specifications Features 1. Palpable Arterial Pulse 2. Realistic Resistance Of Tissue And Artery Wall Felt With The Injection Needle 3. Natural Flashback Training Skills / Applications ● Radial Arterial Puncture ● Artery Blood Sampling ● Radial Line Placement Set Includes: ● 1 Wrist And Hand Model ● 1 Circulation Pump ● 2 Sets Of Puncture Skins (inner And Outer Skin) ● 4 Artery Tubes ● 1 Silicon Tape ● 1 Jar Of Coloring Powder (red) ● 1 Spoon ● 2 Plastic Jars ● 2 Connection Tubes ● 1 Vinyl Sheet ● 1 Syringe ● 1 Storage Case ● 1 Instruction Manual 3d Printer With Basic Materials Specifications ● Print Technology: Fusion Deposition Modeling (fdm) ● Composites-capable 3d Printer W/ Cc Core (high-strength Glass And Carbon Fiber Filament) ● Compatible With Metal 3d Printing Filament 316l / 17-4ph Material And Over 40+ Different Engineering Materials ● Large Build Volume: At Least 330 X 240 X 300 Mm (13 X 9.4 X 11.8 Inches) ● Compatible With Down To 20 Micron (0.001 Inch) Layer Resolution ● Print Head: Dual Extrusion Print Head With A Unique Auto-nozzle Lifting System And Swappable Print Cores ● Capable To Utilize Aa Print Core ● Technology Nozzle Type ● Bb Print Core Technology For Dissolvable Support Nozzle Type ● Cc Print Core For Composites And Abrasive Materials ● Print Head Compatibility ○ Aa Print Core - Build Material ○ Bb- Print Core - Support Material ○ Cc Print Core - Composite Material ● Materials: Compatible With 190+ Different Materials ● Integrated Air Manager ● Air Extraction Rate: 1 - 50 M3/h (35m3/h Nominal Rate For Most Materials At 23°c) ● Osite Material Speed And Precision: ● Print Speed: Min. 30- Max. 300mm/s ● Travel Speed: Min. 30- Max. 350mm/s Up To 16mm3/s ● Precision: 12.5/12.5/5 Micron ● Nozzle Options: 0.25mm / 0.4mm / 0.6mm / 0.8mm Diameter ● Print Surface: Pei Printing Surface ● Inductive Sensor: Yes ● Build Plate: Flexible ● Heatup Time: <2mins ● Auto Detection Of Materials Thru Nfc Technology Material Input ● Sound Operation Level: >51dba ● Built-in Live 1080p Camera ● Includes Software ● Future Proof Investment ● Automatic Materials Switching ● Materials Capacity: Up To Six Spools ● Materials Loading: Front Loading Connection ● File Types: Stl/obj/dae/amf ● Os Requirement: Windows/mac/ubuntu Linux ● Electrical: 100-240vac; 50-60hz ● Open Filament System – Print With Any 2.85 Mm Material ● Connectivity: Wifi, Ethernet, Lan, Usb Drive Connectivity ● 4.7-inch Touchscreen Interface ● Bowden Driven Extruder Technology ● Ruby-tipped Nozzle Option Available Inclusions: ● 3d Printer ● 1 Spool Of Tough Pla Filament And 1 Spool Of Pva (dissolvable) ● Heated Glass Bed ● Front Glass Enclosure ● Usb Thumb Drive, Calibration Card ● Maintenance Tools ● Nfc Spool Holder ● 2x Print Core Aa ● 1x Print Core Bb (for Pva Supports) ● Software With Unending Enterprise Software Subscription And Access To E-learning Modules ● Materials Station ○ Includes 6 Material Storage Equipped With Pre-feeders Which Automatically Swap Between Filaments During Run Outs. ○ Condition Filaments To Optimal Quality And Acts As A Dry-box ● 2 Units Of Filaments Dryer Storage Box ● 3 Units Of Filaments Storage Box ● 1 Unit Of 114l Filament Dry-box ● Speed Kit Bundle With: ○ 2x 0.8 Mm Aa Print Cores For Build Materials ○ 2x 0.8 Mm Bb Print Cores For Support Material Pva Removal Station Specifications Removal Station That Dissolves Support Material Of Prints Quickly And Effectively. ● Container Volume 13.7 Liters ● Maximum Part Size That Can Be Dissolved W 200 X D 230 X H 165 Mm (w 7.8 X D 9 X H 6.4 In) ● Supported Materials: Pla And Pva, Petg, Tough Pla, Nylon, Or Cpe In Combination With Pva ● Supported Solvents: Water ● Rotor Speed: 225 Rpm (normal), 100 Rpm (low) Physical Dimensions At Least W 303 X D 325 X H 374 Mm (w 11.9 X H 12.8 X D 14.7 In) Net Weight At Least 6.35 Kg (14 Lbs) Container Weight (when Empty) At Least 4.2 Kg (9.3 Lbs) Electrical Requirements Voltage: 100 - 240 V Ac Frequency: 50 - 60 Hz Power: 38 W Filaments Starter Bundle Specifications Filaments Starter Bundle Including: ● 5 Units Of Pla ● 5 Units Of Tough Pla ● 5 Units Of Petg ● 5 Units Of Pva ● 3 Units Of Breakaway Infant Warmer Specifications ● Pre-warm Mode Control, Manual Mode Control And Baby Mode Controlled By Micro-computer; ● Set Temperature And Baby Temperature Can Be Displayed Separately; ● Horizon Angle Of Heater Head And Inclination Of The Bassinet Can Be Adjusted; ● The Panels Around Bassinet Can Be Turned Outward; ● X-ray Cassette Under The Bassinet. ● With Wheels And Wheel Breaks ● 1 Unit Only.
Closing Date25 Nov 2024
Tender AmountPHP 16.9 Million (USD 291.5 K)

Adela Serra Ty Memorial Medical Center Tender

Healthcare and Medicine
Philippines
Details: Description Invitation To Bid For Procurement Of Medical Supplies –package 1 (early Procurement Activity) (epa) Ib No. 2024-11-26 (67) 1. The [adela Serra Ty Memorial Medical Center], Using A Single-year Framework Agreement, Through The [astmmc Fund] Intends To Apply The Sum Of Thirty-eight Million Three Hundred Thousand Six Hundred Ninety Pesos Only [38,300,690.00] Being The Abc To Payments Under The Contract For Each Item For The Procurement Of Medical Supplies – Package 1 (early Procurement Activity (epa)) With Ib No. 2024-11-26 (67). Bids Received In Excess Of The Total Cost Per Item Shall Be Automatically Rejected. 2. The [astmmc] Now Invites Bids For [procurement Of Medical Supplies – Package 1 (early Procurement Activity (epa)) With Ib No. 2024-11-26 (67)]. Delivery Of The Goods Is Required Within [10-15 Calendar Days] [after Issuance Of A Call-off]. Bidders Should Have Completed, Within [five Years] From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From [adela Serra Ty Memorial Medical Center] And Inspect The Bidding Documents At The Address Given Below During [8:00am To 12:00; 1:00 To 5:00pm, Monday Thru Friday]. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On [november 4 To 26, 2024] From The Given Address Below, Philgeps Website And Probac Facebook Page And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos Only [25,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In The Manner Whether It Will Be Presented In Person Or Through Electronic Means. 6. The [astmmc] Will Hold A Pre-bid Conference On [november 12, 2024] At [09:30am, Bac Conference Room, 2nd Floor, Opd Bldg., Astmmc, Tandag City, Sds]and/or Through Video Conferencing Or Webcasting Via [meet.google.com/rbu-snjw-vga].}, Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before [november 26, 2024 At 09:00am]. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On [november 26, 2024 At 09:01am] At The Given Address Below And/or Via [meet.google.com/rbu-snjw-vga]. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The [astmmc] Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: [dr. Dominador B. Toral] [bac Conference Room, 2nd Floor, Opd Bldg., Astmmc, Tandag City, Sds] [astmmcprocurement@gmail.com] [tel. No. 086-211-4306] Probac Facebook Page Https://www.facebook.com/astmmc.probac] 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps And Probac Facebook Page] 1 Abdominal Pack ,28x24 Mesh With Xray Liner,with 12" Loop 12"x12"x12 Ply Sterile (lap Sponge) 5000 Pc 225,000.00 2 Abdominal Suction Tubing Sterile Half Curved With Removable Handle, Vacuum Thumb Control, Crown Rip, Tube Length 12ft /suction Connecting Tube With Yankauer Handle Size 3/16", 2m, Sterile 5000 Pc 475,000.00 3 Absorbable Haemostatic Gelatin Sponge Non-woven Material Sterile (oxidized Regenarated Cellulose) 70x50x10mm 100 Pc 43,000.00 4 Airway (mouth Guard) No. 0,size-60mm, Sterile 40 Pc 1,440.00 5 Airway (mouth Guard) No. 00,size-50mm, Sterile 40 Pc 1,440.00 6 Airway (mouth Guard) No. 1,size-70mm, Sterile,white 200 Pc 7,200.00 7 Airway (mouth Guard) No. 2,size-80mm, Steile, Green 750 Pc 27,000.00 8 Airway (mouth Guard) No. 3,size-90mm, Sterile, Yellow 400 Pc 14,400.00 9 Airway (mouth Guard) No. 4,size-100mm, Sterile, Red 350 Pc 12,600.00 10 Airway (mouth Guard) No. 5,size-110mm,sterile, Blue 350 36 12,600.00 11 Anesthesia Breathing Circuit, 72" Expandable Tubing, Single Limb Circuit With Hch Filter And 3l Latex-free Airbag, Adult 200 Pc 170,000.00 12 Anesthesia Breathing Circuit,jackson Reese T-piece Breathing System With 0.5ml Open Tail Bag, 1.8m Length 20 Pc 17,000.00 13 Adhesive Paper Tape 1 Inch/non Woven Tape,12's 250 Box 52,500.00 14 Asepto Syringe 50cc, Sterile, Plastic With Long Tip 4000 Pc 120,000.00 15 Autoclave Tape(steam Indicator)1 Inch X50cm 400 Roll 86,000.00 16 Alcohol Swab/prep Pads With 70% Isopropyl Alcohol,200's 1000 Box 112,000.00 17 Alkytriamine Cationic Surfactant 25ml: 1liter Water Dilution High Level Disinfectant Sporicidal Solution/sterilant 1-5minutes (for Devices And Instruments) 70 Gal 1,400,000.00 18 Enzymatic Pre-soaking Solution With Disinfectant Pre-cleaner With Disinfectant 5ml: 1 Liter Water Dilution 10 Gal 200,000.00 19 Alkytriamine Cationic Surfactant 50ml: 1liter Water Dilution High Level Disinfectant Sporicidal Solution/sterilant For Large And Small Surfaces. (wall To Wall) 30 Gal 234,000.00 20 Armsling Large/adult 650 Pc 33,800.00 21 Bedpan, Plastic 2000 Pc 144,000.00 22 Bp Cuff Arm Cloth, Adult 250 Pc 43,250.00 23 Bonewax 2.5g, 12's 3 Box 10,080.00 24 Calibrated Glass, 210ml 1000 Pc 22,000.00 25 Cautery Pad Adult Compatible With The Existing Cautery Machine, With Cable 200 Pc 116,000.00 26 Cautery Cord W/ Tip Pencil, Sterile, Non Stick Tip 2500 Pc 300,000.00 27 Central Venous Catheter Double Lumen, 7fx12"(30cm) 20 Pc 92,000.00 28 Central Venous Catheter Triple Lumen, 7fx12"(30cm) 10 Pc 51,000.00 29 Cervical Collar, Large 100 Pc 33,000.00 30 Colostomy Bag, Adult (one-sided Comfort Panel And Tape Collar Pouch) With Individually Clip(provide Sample Atleast 2 Pcs) 600 Pc 180,000.00 31 Colostomy Bag, Pedia (one-sided Comfort Panel And Tape Collar Pouch) With Individually Clip(provide Sample Atleast 2 Pcs) 100 Pc 30,000.00 32 Cotton Applicator Tipped Stick, Sterile, 100's 250 Box 25,000.00 33 Ctg Paper (comptible To Eden And Sunray Machine)3pads/box 50 Box 65,000.00 34 Ctg Paper, 152mm X 90mm, 150p (compatible To Edan Machine) (themo) (provide At Least 1 Sample) 100 Pad 43,200.00 35 Chlorhexidine Acetate With Tulle Gras Dressing 10cm X 10cm 500 Pc 47,000.00 36 Disposable Gown Non-sterile,non Woven,water Resistant,soft,good Tensile Strength,10's 5000 Pack 1,625,000.00 37 Disposable Chest Drainage Bottle, 1600ml 300 Pc 180,000.00 38 Disposable Needle G-19, Needle Length 1",100's 350 Box 63,000.00 39 Disposable Needle G-26x1/2", 100's 30 Box 5,400.00 40 Disposable Syringe, W/ Needle 1cc Insulin, G-30x8mm,luer Lock,100's 350 Box 92,050.00 41 Disposable Syringe, W/ Needle 1cc,tuberculin,0.5x16mm,luer Lock, 100's 2000 Box 480,000.00 42 Disposable Syringe W/ Needle 3cc,g-23,needle Length 1",luer Lock, 100's 4000 Box 800,000.00 43 Disposable Syringe W/ Needle 5cc,g-23, Needle Length 1"luer Lock, 100's 3000 Box 600,000.00 44 Disposable Syringe W/ Needle 10cc,g-23, Needle Length 1", Luer Lock, 100's 4000 Box 920,000.00 45 Disposable Syringe W/ Needle 20cc, Luer Lock, 50's 600 Box 180,000.00 46 Disposable Syringe Without Needle 30cc, Luer Lock, 50's 600 Box 374,400.00 47 Disposable Syringe Without Needle 50cc, Luer Lock, 25's 1340 Box 723,600.00 48 Disposable Ecg Electrodes With Prelegged Ag/agcl Sensor, Adult,50's (provide Sample Atleast 5 Pcs) 1200 Pack 288,000.00 49 Disposable Ecg Electrodes With Prelegged Ag/agcl Sensor, Pedia,50's (provide Sample Atleast 5 Pcs) 100 Pack 24,000.00 50 Disposable Ecg Electrodes With Prelegged Ag/agcl Sensor, Neonate,50's (provide Sample Atleast 5 Pcs) 50 Pack 19,200.00 51 Disposable Razor 1700 Pc 25,500.00 52 Disposable Shoe Cover, 100's 700 Pack 140,000.00 53 Ecg Paper 80mm X 20mm 800 Roll 80,000.00 54 Endotracheal Tube Fr. 2.0,uncuffed, 10's 30 Box 9,300.00 55 Endotracheal Tube Fr. 2.5, Uncuffed,10's 30 Box 9,300.00 56 Endotracheal Tube Fr. 3.5, Uncuffed,10's 25 Box 7,750.00 57 Endotracheal Tube Fr. 4.0,uncuffed,10's 25 Box 7,750.00 58 Endotracheal Tube Fr. 6.5,cuffed,10's 30 Box 10,800.00 59 Endotracheal Tube Fr. 7.0,cuffed,10's 50 Box 18,000.00 60 Endotracheal Tube Fr. 7.5,cuffed,10's 160 Box 57,600.00 61 Endotracheal Tube Fr. 8.0,cuffed,10's 30 Box 10,800.00 62 Elastic Bandage 4"x 5y 7500 Roll 150,000.00 63 Elastic Bandage 6"x 5y 7300 Roll 219,000.00 64 Epidural Set/ Epidural Kit, G-18;15mm Spinal Needle Tip Protusion From Tuohy Needle;in Locked Position The Spinal Needle Is Free To Rotate,enabling 360 Degree Freedom For Drug Dispersal In Preferred Direction;excellent Drug Distribution Is Achieved Through Three Helically-located Lateral Eyes Within The Clear Catheter,minimising The Potential For The Localised Pooling Of Drug Solutions Within The Epidural Space;pencil Point Needles Are Designed To Reduce The Risk Of Post Dural Puncture Headache And Atraumatic Entry Into The Subarachnoid Space. (provide Sample 1pc) 200 Pc 642,000.00 65 Extension Tube With Needle Free Valve, Triple Lumen, 10-15cm (bring At Least 1 Sample) 1500 Pc 300,000.00 66 Face Mask, Disposable, Surgical, Medical Grade,earloop,non-woven, 3ply, 50's 8000 Box 800,000.00 67 Foley Bag Cath. 2 Way-silicone Coated Fr. 16, Needleless 5000 Pc 200,000.00 68 Gauze Swab, 4"x4"-8 Ply, 28x24 Mesh, Non-sterile,100's/pack 12000 Pack 1,920,000.00 69 Gauze Swab 40's, 28x24 Mesh, 2"x2"x8 Ply Unsterile,100's 1000 Pack 150,000.00 70 Gauze Sponge,28x24 Mesh,with X-ray Liner,4"x8"x16 Ply, Sterile, 10's (pre-cut) Folded 5000 Pack 470,000.00 71 Gauze Roll, Surgical, With X-ray Liner 36"x100y (fine Mesh, 2 Ply) 28x24 Mesh 35 Roll 35,000.00 72 Gigli Saw (individually Wrapped) 100 Pc 60,000.00 73 Hernia Mesh 7.6cmx15cm (monofilament Knitted, Polypropylene Tissue Reconstruction Prosthesis/standard Hernia Kit 7.5 Cm X 15 Cm, Rectangle, Soft Polypropylene Mesh, Oxidized Regenerated Cellulose (orc) Knitted Fabric, (polydioxanone) Suture Polymer Film 100 Pc 345,000.00 74 Humidifier Sterile Water, 340 Ml 1000 Bottle 200,000.00 75 Ice Bag 6" 400 Pc 40,000.00 76 Internal Jugular Catheter, Double Lumen, Hemodialysis Kit (provide Sample Atleast 1 Pc) 120 Pc 720,000.00 77 Iv Flow Regulator With Pediatric Set (60 Drops/ml)(provide Sample Atleast 2 Pcs) 800 Pc 464,000.00 78 Iv Flow Regulator With Adult Set (30 Drops/ml) (provide Sample Atleast 2 Pcs) 1000 Pc 580,000.00 79 Laparotomy Pack, Sterile (5pcs Surgical Gowns, 5pcs Hand Towels, 1 Laparotomy Drape With Fenestration, 4pcs Square Off Drape With Adhesive, 1pc Mayo Cover, 1pc Suture Bag, 1pc Back Table Cover) 100 Pack 330,000.00 80 Lubricating Jelly, 150 Grams 800 Tube 120,000.00 81 Lubricating Jelly, 5 Grams 5000 Sachet 35,000.00 82 Nasal Oxygen Cannula, Adult 10000 Pc 200,000.00 83 Nasal Oxygen Cannula, Neonate 400 Pc 8,000.00 84 Nasal Oxygen Cannula, Pedia 2000 Pc 36,000.00 85 Nebulizer With Tee,7ft Tubing And Mouthpice, 6ml 10000 Pc 480,000.00 86 Nasogastric Tube Fr. 5 With Radiopaque Line; No Cover, Fits 100cc Asepto Syringe; Silicon 300 Pc 4,500.00 87 Nasogastric Tube Fr. 8 With Radiopaque Line; No Cover, Fits 100cc Asepto Syringe; Silicon, Length 105cm 500 Pc 7,500.00 88 Nasogastric Tube Fr. 14 With Radiopaque Line, 105cm; No Cover, Fits 100cc Asepto Syringe; Silicon, Length 105cm 800 Pc 30,400.00 89 Nasogastric Tube Fr. 16 With Radiopaque Line, 125cm; No Cover, Fits 100cc Asepto Syringe; Silicon, Length 125cm 2000 Pc 76,000.00 90 Non-rebreather Oxygen Mask, Adult,with Non-kink Oxygen Tubing, Oxygen Reservoir Bag 300 Pc 18,000.00 91 Oxygen Mask With Tubing, Adult 5000 Pc 200,000.00 92 Oxygen Mask With Tubing Infant 600 Pc 24,000.00 93 Oxygen Mask With Tubing Pedia 1000 Pc 40,000.00 94 Patiend Id Band, Adult, (white),100's 400 Box 120,000.00 95 Patiend Id Band, Pedia, (blue),100's 100 Box 30,000.00 96 Patiend Id Band, Pedia, (pink),100's 100 Box 30,000.00 97 Pvc Manual Resuscitator Set, Adult, Individually Boxed 2000 Set 3,000,000.00 98 Pvc Manual Resuscitator Set, Pedia, Individually Boxed 500 Set 300,000.00 99 Pvc Manual Resuscitator Set, Neonate, Individually Boxed 300 Set 180,000.00 100 Penrose Drainage Tubing 1/4"x18",sterile 100 Pc 2,400.00 101 Povidone 10% Solution 500 Gal 650,000.00 102 Povidone 7.5 % Cleanser 200 Gal 252,000.00 103 Plaster Of Paris, Fast Setting With Gypsum Powder And Leno Gauze 6 Inches X 5 Yards 1500 Roll 255,000.00 104 Surgical Plaster Creamy White Color, 3",2",1" And 1/2"(provide Sample At Least 2 Roll) 1300 Tube 4,030,000.00 105 Sodalime (soda Sorb),38 Lbs (1724kgs) 25 Pail 212,500.00 106 Spinal Needle Size: 0,53 X 88mm / 25g X 3 1/2", Sterile 4000 Pc 800,000.00 107 Suction Cath. Fr. 5 With Thumb Control Valve, 50-60cm Length 1400 Pc 22,400.00 108 Suction Cath. Fr. 8 With Thumb Control Valve, 50-60cm Length 3000 Pc 48,000.00 109 Suction Cath. Fr. 14 With Thumb Control Valve, 50-60cm Length 3500 Pc 56,000.00 110 Suction Cath. Fr. 16 With Thumb Control Valve, 50-60cm Length 6500 Pc 104,000.00 111 Surgical Blade # 10, Sterile,100's 40 Box 16,800.00 112 Surgical Blade # 11, Sterile,100's 30 Box 11,160.00 113 Surgical Blade # 20, Sterile,100's 40 Box 16,800.00 114 Surgical Cap,non Woven Buoffant, Blue, Double Elastic, 24", 100's 1200 Pack 196,800.00 115 Skin Stapler, Clear Cartridge With Centerline Pointer And Visual Access 35 W 2000 Pc 600,000.00 116 Surgical Scrub Brush Impregnated With Chlorhexidine Gluconate, Soft Sponge And Bristles, Individually Packed With Dispenser, 30's 600 Box 1,209,600.00 117 Sterilization Reel 10 Cm X 100 Cm (4"), Steam Sterilization 15 Roll 23,100.00 118 Sterilization Reel 30mm X 100m (12"), Steam Sterilization 15 Roll 104,400.00 119 Surgical Stapler Remover, 10's 10 Box 10,000.00 120 Thoracostomy (ctt) Tube Fr. 32/thoracic Drainage Catheter 80 Pc 8,960.00 121 Thoracostomy (ctt) Tube Fr. 36/thoracic Drainage Catheter 80 Pc 8,960.00 122 Tracheostomy Set Tube Cuffed With Inner Cannula, Size 7.0 10 Pc 35,100.00 123 Umbilical Cord Clamp Thick With Shaft Safety Security Lock, With Tight Teeth-maintain Tight Seal, Applies Consistent Constant Pressure On Any Size Cord As Cord Shrinks. (provide Sample Atleast 5 Pcs) 5300 Pc 63,600.00 124 Urine Bag (urobag), Adult, Capacity 2000ml,push Pull Valve, With Hook, Sterile (provide Sample Atleast 5 Pcs) 5500 Pc 137,500.00 125 Ultra Transmission Gel, 280ml 100 Tube 20,000.00 126 Underpads Super Absorbable ,23" X 36",25's 650 Pack 406,250.00 127 Urine Collector, Pedia, Capacity 100ml 5000 Pc 75,000.00 128 Urine/stool Cup Plastic,transparent, Sterile, Individually Packed,40ml 100000 Pc 2,000,000.00 129 Urinal Plastic, Male, 1000ml 2300 Pc 115,000.00 130 Vascular Catheter, Permanent Hemodialysis Catheter Splint Type-fr. 14.5f X 24cm With Stylet 70 Pc 1,869,000.00 131 Wadding Sheet 6x5y 2000 Roll 136,000.00 132 Wooden Tongue Depressor, Sterile 100's 150 Box 24,000.00 133 Wound Drainage /closed Wound Drainage System Bulb Type, 125ml Reservoir, 7mm Drain & 3/16" Trocar,sterile 400 Pc 952,000.00 134 Wound Dressing, 9cmx25cm 300 Pc 60,000.00 135 3-way Stop Cock 300 Pc 6,000.00
Closing Date26 Nov 2024
Tender AmountPHP 38.3 Million (USD 657.5 K)
2211-2220 of 2229 active Tenders