Wood Tenders

Details: Description M³ Project Billboard/ Signboard 1.00 L.s. Occupational Safety And Health Program 1.00 L.s. Mobilization/ Demobilization 1.00 L.s. Removal Of Structures And Obstruction 1.00 M³ Structure Excavation (common Soil) 10.60 M³ Embankment From Structure Excavation 6.36 M³ Embankment From Borrow 8.94 M³ Gravel Fill 6.18 M³ Structural Concrete For Footing And Slab On Fill (class A, 28 Days) 6.74 M³ Structural Concrete For Footing Tie Beams (class A, 28 Days) 1.38 M³ Structural Concrete For Column (class A, 28 Days) 1.58 M³ Structural Concrete For Suspended Slab (class A, 28 Days) 0.18 M³ Structural Concrete For Beamsl (class A, 28 Days) 1.62 Kg Reinforcing Steel (deformed), Grade 40 919.35 M² Formworks And Falseworks 58.27 M² 100mm Chb Non-loading Bearing (including Reinforcing Steel) 93.80 Set Frames (jambs, Sills, Head, Transoms And Mullions) 2.00 M² Door (wood Panel) 3.36 M² Aluminum Framed Glass Door (swing Type) 6.72 L.s. Finishing Hardware 1.00 M² Aluminum Glass Window, Sliding Type 5.76 M² Aluminum Glass Window, Fixed Type 1.44 M² 4.5mm Fiber Cement Board On Metal Frame Ceiling 54.23 M² 4.5mm Fiber Cement Board On Metal Frame Double Wall Partition 18.37 L.s. Roof Frame 1.00 M² Cement Plaster Finish 187.59 M² Prepainted Metal Sheets (long Span, Rib-type, 0.5mm Thk) 85.96 M Fabricated Metal Roofing Accessory (ridge Roll) 8.00 M Fabricated Metal Roofing Accessory (flashing) 13.00 M² Fascia Board 30.69 L.s. Plumbing Fixtures 1.00 L.s. Conduits, Boxes, And Fittings 1.00 L.s. Wires And Wiring Devices 1.00 L.s. Panelboard With Main & Branch Breaker 1.00 L.s. Lighting Fixtures 1.00

Details: Description The Local Government Unit Of Gitagum Through Its Bids And Awards Committee (bac), Invites Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) To Bid For The Hereunder Contract. Name Of Project/ Location Brief Description Approved Budget Contract Duration Cost Of Abc Improvement Of Multipurpose Installation Of Pre-finished P 4,978,659.47 90 Calendar Days Building (municipal Gymnasium) Precision-milled Elite Hevea Wood Flooring Poblacion, Gitagum, Mis. Or. Prospective Bidders Should Have Experience In Undertaking As Similar Project With The Last Two (2) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post Qualific Ation Of The Lowest Calculated Bid Shall Be Conducted. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre- Bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations (irr). The Schedule Of Bac Activities Is As Follows: Activities Schedule 1. Receipt From Prospective Bidders Of Request For Expression Of Interest November 5-11, 2024 2. Issuance Of Eligibility Requirements/ Bid Documents November 5-24, 2024 3. Pre-bid Conference November 14, 2024 @ 10:00 A.m. 4. Receipt And Opening Of Bids November 25, 2024 @ 9:30 Am, 10:00am 5. Bid Evaluation November 26, 2024 6. Post-qualification November 27, 2024 7. Notice Of Award November 28, 2024 8. Contract Preparation & Signing November 29, 2024 9. Approval Of Contract By Higher Authority December 2, 2024 10. Issuance Of Notice To Proceed December 3, 2024 The Bac Will Issue To Prospective Bidders Eligibility Forms/bidding Documents At The Engineering Office, Gitagum, Misamis Oriental Upon Their Submission Of Request For Expression Of Interest And Upon Their Payment Of A Non-refundable Amount Of Five Thousand Pesos (p 5,000.00) For Local Government Unit Of Gitagum, Municipal Treasurer. The Local Gov’t Unit Of Gitagum Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Only Expenses Incurred In The Preparation Of Their Bids. Approved: Purito M. Velez Bac Chairman

Details: Description 1 Repair Of Comport Room Wall Tiles 40x40 Pieces 140 Floor Tiles 40x40 Pieces 80 Urinal Toilet Pieces 8 Toilet Bowl Pieces 10 Toilet Bowl Flush Set Pieces 4 Lavatory Pieces 6 Latex Gloss White Gallons 12 Skim Coat Abc Bags 5 Portland Cement Bags 54 Tile Adhesive Bags 10 Pvc Pipe #3 Neltex Piece 1 Solvent 400cc Cans 2 Pvc Pipe (blue) #1/2 Pieces 24 Elbow Pvc #1/2 Pieces 30 Coupling Pvc #1/2 Pieces 30 Pvc Pipe (orange) #2 Piece 1 Elbow #2 Pieces 2 Tiles 60x60 Pieces 8 Screen Sand (vibro) Load 1 Phelp Dodge Wire 22 Thhn Meters 75 Electrical Tape Rolls 2 Switch Single Sets 2 Receptacle Pieces 6 Glass/aluminum Door 1.66 X 1.04 Meters Pieces 2 Thhn Electrical Wire #12 (shs) Boxes 4 Gi Pipe 1 Inch Pieces 40 Square Bar 10mm Pieces 70 Welding Electrode 6013 Boxes 15 Cutting Disc Pieces 100 Metal Primer Red Oxide Gallons 3 Paint Brush 1 1/2 Pieces 100 Green Metal Paint Gallons 4 Cylindrical Hinges 1" Pieces 30 Door Knobs Pieces 10 Gi Plainsheet 4x8 Pieces 10 2 Repair Of Lactation Station 1/2 X 2 X 10 Wood Strip Pieces 45 Ply Board Sta. Clara ( Thickness) Pieces 14 Smart Board 3/16 Pieces 28 Concealed Hinges #1 Pieces 20 Finishing Nail #2 Kg 4 Finishing Nail #1 Kg 2 Stainless Kitchen Sink Single Deep Piece 2 Rain Or Shine Maple Paint Liters 18 Sandpaper #180 Pieces 20 Sandpaper #240 Pieces 20 H-type Stainless Handle (small) Pieces 20 Exhaust Fan 16 Inches Pieces 3 3 Repair Of Teen Center Hardiflex #1/4 Pieces 14 Tubular 2x2 Pieces 10 C Purlins 2x3x20 Pieces 20 Blind Rivets #1/8 Boxes 4

Details: Description Construction Of 2 Tls Of Danawan Es 1 Gravel Bedding 10 Cu M 700 7000 2 Cement 100 Bag 252 25200 3 Sand 8 Cu M 980 7840 4 Crushed Gravel 12 Cu M 1405 16860 5 Deformed Bar 10mm 50 Pc 171.12 8556 6 G.i. Wire # 3 12 Kg 71.4 856.8 7 Prepainted Corrugated Sheet Gi Sheet Ga. 26, 36"x8" 88 Pc 1450 127600 8 Prepainted G.i. Ridge Roll Ga. 26, 24"x8" 8 Pc 303.33 2426.64 9 Umbrella Nails 14 Kg 79 1106 10 Roof Sealant 2 L 470 940 11 Roof Insulator 10mmx1m 160 M 90 14400 12 2"x3"x10' Cocolumber, Wood Beam 360 Bd.ft 35 12600 13 2"x3"x10' Cocolumber, Secondary Post 300 Bd.ft 35 10500 14 2"x3"x10' Diagonal Wall Stud 430 Bd.ft 35 15050 15 4"x4"x10' Lumber, Main Post 300 Bd.ft 35 10500 16 Plywood, Marine 1/4"x4x8' 36 Pc 378 13608 17 Common Wire Nails # 4 30 Kg 80 2400 18 Machine Bolts With Std. Nuts And Washers, 1/2"x7" 180 Pc 15 2700 19 Rough Lumber, Sun Dried, Tanguile 80 Bd.ft 43 3440 20 Lawanit, 1/4" Thk 4 Pc 280 1120 21 Finishing Nails 2 Kg 80 160 22 Common Wire Nails # 2 2 Kg 80 160 23 Enamel, Flatwall 10 Gal 595 5950 24 Enamel, Semi Gloss 6 Gal 620 3720 25 Paint Thinner 2 Gal 286 572 26 Paint Brush 2" 6 Pc 180 1080 27 Paint Brush 4" 4 Pc 115 460 Total 296805.44

Details: Description Request For Quotation Marine Plywood, 1/4" 35 Pcs Metal Double Furring Channel, 5m,0.40mm 110 Pcs Black Screw 1'' (metal) 2,200.00 Pcs Blind Rivets 3/16'' X 1/2'' 2 Box Drill Bit (metal) 3/16''" 6 Pcs Drill Bit (masonry) 3/16" 3 Pcs Nylon Chord (1.0mm) 4 Roll Reviter, Heavy Duty, Slim Nose,10.5" 2 Pcs Aviation Snip Cutter (250mm, 10") 2 Pcs Nail, Concrete Nail, 1" 2 Kgs Marine Plywood, 3/4" 38 Pcs Marine Plywood, 1/2" 12 Pcs Stikwel (500g) 6 Sachet Wood Molding 1/2'' X 1'' X 8ft 95 Pcs Door Handle (stainless, 198mmx64mm) 22 Pcs Concealed Hinges (stainless, 7.7*3.3*1.7cm) 22 Pairs Nail, Finishing Nail 2'' 3 Kgs Nail, Finishing Nail 1 1/2'' 3 Kgs Paint Flat Latex (white) 1 Pail Paint Semi Gloss (white) 1 Pail Paint, Flat Enamel (white) 12 Gal Paint, Qde (white) 12 Gal Paint (baguio Green) 2 Gal Paint, Oil Tinting Color, (lamp Black) 2 Ltr Paint, Oil Tinting Color (thalo Blue) 2 Ltr Paint Thinner 6 Gal Glazing Putty, White, (plasolux) 8 Gal Gauze Tape 50mmx75m 12 Pcs Sand Paper #120 50 Pcs Roller Brush Foam 7" W/ Basin 4 Pcs Baby Roller (cotton And Foam With Handle) 4 Pcs Paint Brush 3" 5 Pcs Paint Brush 2" 5 Pcs Pallete "4 2 Pairs 1/2'' Flexible Hose 1 Roll Thhn Stranded Wire #14 1 Box Utility Box (orange) 4 Pcs Junction Box (orange) 5 Pcs Electrical Tape, (big) 2 Pcs Switch, 2-gang, 2.5" X 4.5" 4 Pcs Bulb, Led, 15w (1695 Lumens) 14 Pcs Receptacle, 4-1/4", 6 Amp. 250 Volts 14 Pcs For The Use Of 9mib, 9id, Pa

Details: Description The Deped Baguio Teachers Camp Through It's Bids And Awards Committee (bac) Is Now Inviting Interested Suppliers To Quote On The Following Items: 1 2 Roll Soldering Lead (10 Meters) 2 3 Set Drill Bit Blades, For Concrete (sizes: 1/4", 3/8", 1/2", 5/8", 3/4" 3 3 Set Drill Bit Blades, For Metal (sizes: 1/4", 3/8", 1/2", 5/8", 3/4") 4 2 Pair Hand Gloves (for Electrician) 5 10 Pair Leather Gloves 6 8 Pcs Bar Clamp 36" Steel, Heavy Duty 7 8 Pcs Bar Clamp 24" 8 8 Pcs Bar Clamp 14" 9 4 Pcs Flat File 1-1/4" 10 30 Pcs C Clamp 6" Steel, Heavy Duty 11 3 Pcs C Clamp 10" Steel, Heavy Duty 12 3 Pcs Bar Clamp 6' Steel, Heavy Duty 13 1 Pcs Half-round File 14 10 Pcs Triangular File 1/4" 15 10 Pcs Triangular File 1/8" 16 1 Pc Jigsaw Blade #3 17 1 Pc Chainsaw Blade For Ms 382 18 1 Set Makita Router Blades Model D1588 19 8 Pcs Measuring Tape 8m 20 4 Pcs Tekscrew Adaptor Heavy Duty 21 1 Pc Crocodile Jack 3 Tons 22 1 Set Socket Range, Heavy Duty 4mm, 24mm Maximum 23 1 Pc Rubber Mallet Hammer, 0.45kg 24 1 Pc Rubber Mallet Hammer, 0.68kg 25 1 Pc Manual Tile Cutter, Heavy Duty (800mm Max. Cutting Length) 26 1 Pc Hydraulic Jack 5 Tons 27 2 Unit Random Orbit Sander, 250w Input Power, Sanding Pad Diam. 125mm, Oscillating Circuit Diam. 2.5mm, No Load Speed: 7500-12000rpm, W/ 8 Hole Sanding Pad 28 1 Unit Measuring Wheel/walking Wheel (10,000m Working Range, 5 Digit Counter W/ Manual Reset Button) 29 1 Unit Fiber Glass Measuring Tape 50m Long 30 2 Pcs Band Saw Blade 6.5mm X 2240mm (for Torq Bandsaw) 31 2 Pcs Band Saw Blade 10mm X 2240mm (for Torq Bandsaw) 32 2 Pcs Band Saw Blade 15mm X 2240mm (for Torq Bandsaw) 33 2 Pcs Band Saw Blade 20mm X 2240mm (for Torq Bandsaw) 34 2 Set Square Drill Chisel 1/2" W/ Adaptor, Heavy Duty 35 2 Set Square Drill Chisel 3/4" W/ Adaptor, Heavy Duty 36 4 Pcs Clamp 8" X 90 Degree, Steel 37 8 Pcs C Clamp 8" Steel 38 1 Set Router Blades 39 2 Set Adjustable Drill Bit Blade 1/2" 40 1 Set Serrated Drill Bit (titanium) 41 1 Set Drill Bit Hole Saw (for Doors And Cabinets) 42 1 Set Drill Bit Hole Hss Drill Bit Hole (for Doors And Cabinets) 43 5 Pcs Cutter, Metal Alloy 44 1 Unit Vertical Bandsaw 1200w, Throat Size: 350mm, Blade Size 2560x12.5. 0.5mm, Max. Cutting Depth: 230mm, Table Size: 548 X 400mm, Table Tilting Range 0-45 Degree, With Warranty 45 1 Unit Table Saw 10" 1800w, Incline Setting 45˚ L/0˚ R, Blade Diam.: 254mm, Table Size: 555x555mm, Blade Bore Diam.: 25.4mm, Tool Dimensions 690x620x1000mm, No-load Speed: 4300rpm, W/ 2 Circular Saw Blade, For Wood, 254 X 2.5/1.8 X 25.4mm, W/ Warranty 46 2 Unit Air Concrete Nailer 75-116psi Acn18641 (with Free 3 Meters Yellow Taope Measure + Safety Glasses +safety Cloth Gloves), With Warranty, Heavy Duty 47 2 Unit Air Wood Nailer 75-116psi (with Free 3 Meters Yellow Tape Measure + Safety Glasses + Safety Cloth Gloves), With Warranty, Heavy Duty 48 1 Unit Sewer Rod 1/8" X 1" X 50" Heavy Duty, Have A Hand Grip And A Spear Point At One End And Roller Ball At The Other 49 1 Unit Professional Wired Mini Grinding Set 12v Dc Drill Grinder Tool/electric Mini Grinder Polishing Tool For Cutting, Engraving, Milling, Grinding, Polishing, Removing And Drilling, Inclusion: Set Of Tools/blades 50 1 Unit 750w Variable Speed Wood Turning Lathe Machine, Output Speed: 760/1100/1600/2200/3200rpm, Swivel Diameter: 254mm, Top Distance: 475mm, Diameter Of Faceplate: 75mm, Tool Holder Length: 150mm, W/ Complete Set Of Tools, W/ Warranty 51 4 Pcs Industrial Spirit Level Leveling Tool With Powerful Magnets Leveling Tool 60cm 52 2 Psc Multifunctional Laser Leveler With Tape Ruler, Multipurpose Laser Level Pr03 Laser Measure Line 8ft+ Measure Tape Ruler Adjusted Standard 53 1 Unit Welding Machine Inverter, 220v-240v, Rated Input Capacity: 28kva, Amps: 20-450, 50-60hz, Ip21 With Ground Wire, Handle And Mask, Gloves, Welding Rod 54 2 Pcs Soldering Iron (45 Watts) 55 20 Set Safety Full Body Harness (for Maintenance Personnel) 56 1 Unit Cut-off Machine 14", 220v, 2000w 57 2 Pcs Ladder, A-type, 8 Feet 58 4 Set Corner Clamp 90 Degrees Right Angle (4pcs/set) 59 1 Unit Electric Welding Machine 500 Amps Hd 60 1 Unit Crocodile Jack 5 Tons Note: Add 6% Tax **********nothing Follows*********** Instructions: Note: Failure To Follow Theses Instructions Will Disqualify Your Entire Quotation 1 Accomplish This Rfq Correctly And Accurately. 2 Do Not Alter The Contents Of This Form In Any Way. 3 All Mandatory Technical Specifications Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/disqualified. Terms And Conditions 1. Bidder Shall Provide Correct And Accurate Information Required In This Form. Bidding Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of The Republic Act 9184 And The Deped Customized Agency Procurement Manual (cam). 2. Price Quotation/s Must Be Valid For A Period Of Forty-five (45) Calendar Days From The Date Of Submission. 3. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 4. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 5. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 6. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On: [ ] Lot Basis, Hence Only Complete Bids Are Accepted, No Partial Bids Allowed. Award Shall Be Made To The Bid/ Quotation Or Combination Of Quotations Resulting In The Total Lowest Calculated And Responsive Bid/quotation (for Good And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Technical Specifications And Other Terms And Conditions Stated In The Contract / Po. Or [ ] Per Item Basis Where Each Item To Be Evaluated And Awarded Separately Under Separate Contracts; Or, Several Items Grouped Together To Form One Complete Lot To Be Awarded To A Single Bidder To Form A Singular Complete Contract; Or, Similar Items To Be Grouped Into Several Lots, And Evaluated And Awarded As Separate Contracts. 7. The Item/s Shall Be Delivered Within The Terms Specified In The Approved Purchase Order (po)/ Notice To Proceed (ntp). Payment Shall Be Made Immediately Upon Receipt Of The Goods (complete) And Or Completion Of Service/s (as Specified In The Terms And Conditions In The Contract/po)/ Demand For Payment And Submission Of The Required Supporting Documents If Any. 8. Representatives From The Property And Supply Section, Commission On Audit (coa), And Accounting Section Shall Have The Right To Inspect And / Or Test The Goods To Confirm Its Compliance To The Technical Specifications. 9. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Baguio Teachers Camp Shall Rescind The Contract / Po Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. 10.the Btc-bac Reserves The Right To Accept Or Reject Any And All Bid/s, To Annul The Bid Opening Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/s. 11. Quotations, Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. Please Quote Your Best Offer For The Item Described Herein Addressed To: "ma. Susan T. Bustarde Administrative Officer V Chairperson, Btc Bids And Awards Committee (btc-bac) Telephone No.: (074) 442-7148" Submit Your Sealed Bids/quotation Duly Signed By You Or Your Duly Authorized Representative And Copies Of The Required Documentary Requirements Not Later Than 10:00am On November 22, 2024 Quotations May Be Submitted Through Fax Or Electronic Mail With The Following Documents At Teacherscampbac@gmail.com Or At: Bac Secretariat Property And Supply Unit Administrative Section Deped Baguio Teachers Camp Leonard Wood Road, Baguio City Tel/fax #: 074-442-7148 Eligibility Requirements: 1. Business Permit, 2. Dti Registration, 3. Bir Tax Clearance Certificate, 4. Philgeps Certificate Of Registration, And 5. Notarized Omnibus Sworn Statement.

Details: This Project Derives From An Increase In Development Within The Borough And The Need To Mitigate Against The Impact Of Visits To The New Forest By Providing Recreational Spaces Closer To The Residents Of Eastleigh Borough Council. The Site Comprises Of An Area Of Farmland Of Approximately 20 Hectares In Size Which Is Part Of The Former Stoke Park Farm, Bishopstoke. The Proposed Field Was Formerly Used For Cattle Grazing On Rotation And Now Predominantly Comprises Of Grassland With A Wooded Tree Belt Which Runs Along A Drainage Ditch And Divides The Sites Northern Portion. The Scheme (ref: F/23/95844) Includes But Not Limited To The Discharge Of Planning Conditions, Creation Of A Series Of Paths Which Incorporate A Main Circular Walking Route, Hedgerows, Trees, Complementary Features Including Seating And Picnic Areas At Key Locations, Along With Signage, Litter And Dog Bins. A Range Of Ecological Enhancements Are Also Proposed Including Log Piles, Hibernaculum, Bird And Bat Boxes. This Itt Has Been Prepared By Eastleigh Borough Council For The Purposes Of Inviting Contractors With The Appropriate Skills, Experience, Procedures And Financial Standing To Submit A Tender For The Construction Of Stoke Park Farm Sang Please See Itt Attached And Supporting Information For Instructions On How To Tender For This Opportunity

Details: Description 27 Pc Chairs (monoblock) 7 Unit Electric Stand Fan 16" 1 Unit Filing Cabinet Lateral, 4layer Gauge 20 4 Pc Heavy Duty Trapal (12x18 Ft) 5 Unit Heavy Duty Calculator (12 Digits, Dual Power Commercial Type) 2 Unit Heavy Duty Electric Weighing Scale (10kg) 6 Unit Heavy Duty Foldable Table 180x74x74cm 1 Unit Heavy Duty Platform Weighing Scale (500kg) 6 Pc Heavy Duty Weighing Scale (100kg) 39 Pc Heavy Duty Weighing Scale, 15kg Mechanical Dial Type 92 Pc Plastic Drum (120 Liters) 4 Unit Portable Platform Trolley 13 Pc Record Book, 150 Pages (285mm X 177mm) 87 Pc Rice Scooper Stainless Steel (medium) 30 Pc Stackable Export Plastic Pallet (mesh Type 1200mm X 800mm X 150mm) 14 Pc Wooden Pallette (180cmx120cm)

Details: Description Lot A- C-1000-0108-24: Bureau Of Equipment, Eomd Electrical Supplies 1 Fluorescent Tube Lamp 18 Watts 25 Pcs 2 Fluorescent Housing 30 Pcs 3 Led Daylight Bulb 18 Watts 30 Pcs 4 Fluorescent Starter Single 220-240 Volts, 4-65 Watts 30 Pcs 5 Ballast For Fluorescent Lamp 220v, 20 Watts 25 Pcs 6 Ballast For Fluorescent Lamp 220v, 36-40 Watts 30 Pcs 7 Led Fluorescent Light T8 (with Frame) 10 Pcs 8 Automotive Halogen Bulb 12volts, 21 Watts 30 Pcs 9 Automotive Halogen Bulb 12volts, 100/90 Watts 30 Pcs 10 Automotive Halogen Bulb 24volts, 25/10 Watts 30 Pcs 11 Automotive Halogen Bulb 24volts, 75/70 Watts 30 Pcs 12 Automotive Led Light T10, 12volts, Color: White 30 Pcs 13 Automotive Led Light T10, 12volts, Color: Orange 30 Pcs 14 Automotive Led Light T15, 12volts, Color: White 30 Pcs 15 Automotive Led Lightt15, 12volts, Color: Orange 30 Pcs 16 Mini Fuse 30amps, 25amps, 20amps, 15amps, 10amps (50 Pcs. Each) 250 Pcs Please Indicate Brand If Applicable Subtotal Amount (php) Lot B- C-1000-0125-24: Bureau Of Equipment,eomd 1 Plywood 4' X 8' X 1/4" 12 Pcs 2 Plywood 4' X 8' X 3/4" 12 Pcs 3 Kiln Dried Wood Planks (2"x2"x12') 12 Pcs 4 Kiln Dried Wood Planks (2"x4"x12') 12 Pcs 5 Sealing Pipe Threads, Tape, Big (at Least 10m Per Roll) 30 Rolls 6 Electrical Tape (big), Black 20m/roll 30 Rolls 7 Rugs, 6"diameter (thin) 50 Kgs. 8 Detergent Soap 10kls./ Pail 5 Pails 9 Liquid Hand Soap 10 Gals. 10 Automotive Battery Terminal (lead Type) 30 Pairs 11 Ring Type Terminal Lugs (200a) 20 Pcs 12 Ring Type Terminal Lugs (500a) 20 Pcs 13 Pvc 1/2" Coupling (blue) 100 Pcs 14 Pvc 1/2" Tee (blue) 25 Pcs 15 Pvc 1/2" Elbow (blue) 50 Pcs 16 Pvc 1/2" Female Adopter (blue) 50 Pcs 17 Pvc 1/2" Elbow With Thread (blue) 20 Pcs 18 Pvc 1/2" Clamps (blue) 200 Pcs 19 Pvc Pipe Cement (400cc Per Can) 3 Cans 20 Sand Paper #50 35 Pcs 21 Sand Paper #120 35 Pcs 22 Sand Paper #240 35 Pcs 23 Sand Paper #600 35 Pcs 24 Sand Paper #1000 35 Pcs Please Indicate Brand If Applicable Subtotal Amount (php) Lot C- C-0600-0021-24: Internal Audit Service 1 Fuorescent T5, 28w 15 Pcs Please Indicate Brand If Applicable Subtotal Amount (php) Grand Total Amount (php) Please Specify Total Amount In Words "terms And Conditions : " "1. All Entries Must Be Typewritten Or Legibly Written. " 2. Delivery Period Within 15 Working Days Upon Receipt Of The Approved Funded Purchase Order (p.o). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non- Delivery Without Valid Reason. 3. Warranty Shall Be For A Mininum Of Three (3) Months For Supplies From Date Of Acceptance By The End-user. "4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. " "5. Philgeps Registration Number And Mayor's Permit Shall Be Attached Upon Submission Of The Quotation. " Dti /sec And Latest Tax Clearance Shall Be Submitted Before The Award Of Purchase Order (p.o.). 6. Bidders Must Quote For All Of The Items. Any Erasure, Correction Or Alteration Made By The Bidders In Any Of The Items Shall Render The Bid Non-complying, Hence, A Ground For Disqualification. 7. The Dpwh Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject " All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder. " " 8. Bidders Shall Submit A Proposal On Each Items And Evaluation And Award Of Contract Will Be Undertaken On A Lump Sum Basis" "medmier G. Malig Assistant Secretary For Technical Services And Information Management Service Acting Chairperson, Bac For Goods "

Details: Description Note: Send Your Quotation To Ralphnathaniel.burton@fprdi.dost.gov.ph Note: Send Your Quotation To Ralphnathaniel.burton@fprdi.dost.gov.ph Paint Color: Flat White Latex - 16 L Color: Semi-gloss Latex (beige) - 16l Color: Chocolate Brown - 4l Cutter Heavy Duty For Laboratory Use Wrench Set (open And Close) 10-pc Set Socket Wrench Set 24 Pcs 1/2 Inch Drives (10-32) Screw Driver Set 20-piece Set Jig Saw 18mm (1-1/16") - 450 W Drill Bit Set For Metal (small To Large Size) For Concrete (small To Large Size) Hole Saw Tip 16-30 Mm Allen Wrench Set Hexagonal Key, Ball End Tip, With T-handle Chisel Set 3pcs Per Set File Set 5 Pcs Per Set Rotary Tool Kit 1/26 Rotary Tool Intermediate Kit, 10,000 To 32,000 Rpm, With A Hard Case Riveter Heavy Duty, Compatible To 1/8, 5/32, And 3/18 Inch Rivets Wood Planer Set (katam) 3 Pcs Per Set Claw Hammer Large Small Hand Drill 10 Mm, 450 W, With Cord Saw Chain For Chainsaw Similar To: 20" Stihl Chain Saw 5" Sanding Disc (50 Pcs Per Box) Compatible To: Makita B05031 Random Orbit Sander 5" 300w Grit 100 Grit 180 Grit 320 Sandpaper Grit 80 (100 Pcs/box) Grit 100 (100 Pcs/box) Grit 180 (100 Pcs/box) Grit 320 (100 Pcs/box) Welding Rod (5kg Per Box) Ordinary Type Stainless Type Cutter Blade 10 Tubes Per Box Cutting Disc 4", 10pcs Per Box Hack Saw Standard Size For Laboratory Use Paint Brush 1"size 2"size 3"size 4"size Palm Router, For Wood Palm Router 1/4" (variable Speed), 710w, 10,000 — 30,000 Rpm Finishing Materials Finishing Sander 180w, Pad Size Of 93x185mm, Abrasive Paper -size - 93x228mm ( 3-5/8"x9" ), 12,000 Opm 'heavy Duty Universal Outlet Extension Cord - 10 M Extension Wheel 10-meter Cord Length 10a - Wew- 1om/u Orbital Sander 5 " Random Orbital Sander Unit 5", 300w, 4,000 - 12,000 Opm Chainsaw Oils Chain Lubricant Similar To: Wd 40 Roller Chain Lube Chain Oil 1 Similar To: Petron 2t Powerburn Oil 1l Per Container "chain Oil 2 Similar To: Petron Sprint 4t Sae 40" Engine Oil 4t, Viscosity Grade Of Sae 40, 1 Liter Bottle Polyester Body Filler With Hardemer, 4l Set Bidet Spray Toilet 304 Stainless Steel, High Pressure, Thickened Telescopic Tube, Flexible 2 Meter Hose Personal Protective Set Equipment (ppe's) Welding Gloves Size: Large (10 - 12") Cotton Construction Gloves Size: Large Heat Resistant Gloves 18" Length Can Withstand At Least 200°c Construction Nitril Gloves Size: Small Size: Medium Size: Large Note: Send Your Quotation To Ralphnathaniel.burton@fprdi.dost.gov.ph ================================= Important Reminders: Please Observe The Following Instructions Below When Accomplishing The Fprdi Rfq Form. 1. Accomplish This Rfq Correctly And Accurately. 2. Do Not Alter The Contents Of This Form In Any Way. 3. Indicate "no-bid", “no Quote” Or “no Offer” For Items Not Intended To Bid 4. All Technical Specifications Are Mandatory. Failure To Comply With Any Of The Mandatory Requirements Will Disqualify Your Quotation. 5. Failure To Follow These Instructions Will Disqualify Your Entire Quotation. Bid Can Be Submitted Thru Our Official E-mail Account At Ralphnathaniel.burton@fprdi.dost.gov.ph Stating Philgeps Reference No. Or Thru Express Mail/courier. Your Quotation Will Only Be Valid When Sent To This E-mail Account. Please Use Our Official Fprdi Request For Quotation (rfq) Form. Kindly Complete All The Details In Our Official Rfq Form Including Unit Price And Total Price. Just Attach Any Additional Details/descriptions You Would Like To Include In Your Bid. Please Submit Scanned/photocopies Of The Following Documents As Required By Philgeps For Small Value Procurement - Mayor's Permit (cy 2024) - Philgeps Registration - Omnibus Sworn Statement (oss). Please Be Reminded To Use The Latest Oss Template Issued By Gppb And To Indicate The Names Of The Project And The Procuring Entity. Alternatively, You Can Submit Your Sealed Quotation To This Address On Or Before The Closing Of Bid Property And Supply Section/bac Secretariat Dost-forest Products Research And Development Institute Narra Rd. Forestry Campus, College, Los Baños, Laguna 4031