Wood Tenders

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: Description Local Bidding For Goods Invitation To Bid For Goods Contract (for Posting And Personal Delivery) Date: December 25, 2024 To: The Municipality Of Dumingag Intends To Apply Through Trust Fund In The Amount Of Three Million Six Hundred Forty-nine Thousand Six Hundred Eighty-one Pesos (php 3,649,681.00) Being Approved Budget For The Contract (abc) For The Supply And Delivery Of Materials W/ Hauling Cost For Dumingag Ip Housing Project At Dilud, Dumingag, Zamboanga Del Sur Bids Received In Excess Of Abc Shall Be Automatically Rejected. Interested Bidders Are Requested To Submit Their Offered Price For The Supply Of The Items Listed Below: Item No. Items / Description Qty Unit Unit Cost Total 1 Gravel Bedding (g-2) 45 Cu.m 2 Mechanical Hauling 1 Lot 3 Manual Hauling 1 Lot 4 200 Pcs - 20" X 3" X 12' Coco Lumber 1200 Bd.ft 5 Assorted Cwn 55 Kgs 6 Manual Hauling 1 Lot 7 10mmø Rsb 60 Pcs 8 12mmø Rsb 122 Pcs 9 #16 Tie Wire 31 Kgs 10 Mechanical Hauling 1 Lot 11 Manual Hauling 1 Lot 12 Portland Cement 419 Bags 13 Washed Gravel 32.5 Cu.m 14 Washed Sand 21.5 Cu.m 15 Mechanical Hauling 1 Lot 16 Manual Hauling 1 Lot 17 4" Chb 4905 Pcs 18 Portland Cement 393 Bags 19 Sand 35 Cu.m 20 Mechanical Hauling 1 Lot 21 Manual Hauling 1 Lot 22 1/2"ø Pvc Pipe, Blue 152 Pcs 23 1/2"ø Pvc Tee 76 Pcs 24 1/2"ø X 45° Pvc Elbow 190 Pcs 25 1/2"ø X 45° Pvc Theaded Elbow 114 Pcs 26 1/2" X 1/2" Angle Valve 38 Pcs 27 Faucet 38 Pcs 28 1/2" X 18" Flexible Hose 38 Pcs 29 Pvc Bibb Faucet, Lever Type 76 Pcs 30 1/2" Teflon Tape 38 Rolls 31 1/2" Pvc Globe Valve 38 Pcs 32 200cc Solvent Cement 38 Can 33 4"ø Pvc San. Pipe S1000 76 Pcs 34 2"ø Pvc San Pipe S1000 38 Pcs 35 4"ø X 45° Pvc Bend 114 Pcs 36 2"ø X 45° Pvc Bend 80 Pcs 37 4" X 4" Pvc Wye 266 Pcs 38 2" X 4" Pvc Wye 76 Pcs 39 4"ø Pvc Cap 190 Pcs 40 2"ø X 90° Bend 110 Pcs 41 2"ø Pvc P-trap 38 Pcs 42 Pvc Floor Drain 38 Pcs 43 Pail Flush Water Closet 38 Pcs 44 Mechanical Hauling 1 Lot 45 Manual Hauling 1 Lot 46 G18 X 18' Corrugated Sheet 760 Pcs 47 0.40mm X 24" Ridge Roll 144 Pcs 48 373 Pcs - 2" X 3" X 12' Gemelina 2238 Bd.ft 49 Umbrella Nails 112 Kgs 50 257 Pcs- 1" X 12" X 12' Fascia Board 3086 Bd.ft 51 Assorted Cwn 60 Kgs 52 Mechanical Hauling 1 Lot 53 Manual Hauling 1 Lot 54 237 Pcs - 2" X 4" X 10' Good Lumber 1580 Bd.ft 55 4" X 4" Loose Pin Hinge 140 Sets 56 Door Knob 72 Sets 57 3" Sliding Latch 72 Sets 58 325 Pcs- 2" X 4" X 8' Good Lumber 1731 Bd.ft 59 Assorted Cwn 48 Kgs 60 Finishing Nails 48 Kgs 61 Glass Jalousie W/ Frame, 13 Blades/span (2 Span Per Set) 190 Sets 62 Glass Jalousie W/ Frame, 13 Blades/span (1 Span Per Set) 38 Sets 63 Glass Jalousie W/ Frame, 6 Blades Per Span 38 Sets 64 Mechanical Hauling 1 Lot 65 Manual Hauling 1 Lot 66 Safety Switch 30am 38 Pcs 67 Straight Connector 114 Pcs 68 Fuse 30am 38 Pcs 69 Fuse 15am 38 Pcs 70 Pdx Wire #10 114 Meter 71 Pdx Wire #12 1330 Meter 72 Pdx Wire #14 1900 Meter 73 Staple Wire #1 76 Boxes 74 Electrical Tape Big (armak Or Equivalent) 76 Pcs 75 Wood Screw 760 Pcs 76 4" X 4" Junction Box Pvc 114 Pcs 77 Receptacle Surface Type 266 Pcs 78 Outlet 3 Gang, Surface Type 266 Pcs 79 Thumbler Switch Surface Type 266 Pcs 80 K-10 Wire Holder 38 Pcs 81 Led Bulb 15w 266 Pcs 82 Service Drop Wire #6 1900 Meter 83 Mechanical Hauling 1 Lot 84 Manual Hauling 1 Lot 85 1/4" X 4' X 8' Marine Plywood 552 Pcs 86 257 Pcs- 4" X 4" X 10' Good Lumber 3426.73 Bd.ft 87 574 Pcs- 2" X 2" X 10' Good Lumber 1913.33 Bd.ft 88 55 Pcs- 2" X 3" X 12' Girt 330 Bd.ft 89 202 Pcs- 1" X 2" X 12' 404 Bd.ft 90 Assorted Cwn 396 Kgs 91 172 Pcs- 2" X 4" X 12' (top Chord) 1376 Bd.ft 92 110 Pcs- 2" X 4" X 12' (web Member) 880 Bd.ft 93 165 Pcs- 2" X 4" X 12' 1320 Bd.ft 94 Assorted Cwn 108 Kgs 95 Bamboo 76 Pcs 96 Roof Sealant 21 Liter 97 Solignum 36 Liter 98 Mechanical Hauling 1 Lot 99 Manual Hauling 1 Lot 100 Septic Tank 20 Sets 101 Septic Tank 16 Sets 102 Safety Materials 1 Set 103 Project Billboard (tarpaulin 8"x8" With 2"x2"x8' Coco Lumber Wood Frame, 2pcs Plywood) 1 Lot 104 #26 Corrugated Gi Sheets 12 Sheet 105 Ordinary Plywood #3/16" Thck 10 Sheet 106 Coco Lumber #2" X 3" X 12' (150 Pcs) 900 Bd.ft 107 Coco Lumber #2" X 2" X 12' (150 Pcs) 600 Bd.ft 108 Cwn #4" 15 Kgs 109 Cwn #3" 6 Kgs 110 Cwn #2 1/2" 6 Kgs 111 Umbrella Nails #3" 4 Kgs 112 Shovel 10 Unit 113 Trapal (blue & Orange) 25 Meter 114 Barra De Cabra 2 Unit 115 Digging Bar (tagad) 4 Unit 116 Wheel Borrow 4 Unit 117 Construction Pail Pvc 10 Pcs 118 Dust Mask 10 Pcs 119 Handgloves 10 Pcs 120 Hard Hat 10 Lot 121 Rubber Boots 10 Pcs Total: We Will Only Accept An Offered Price That Is Fixed And Is Not Subject To Any Adjustment. Bid Shall Be Valid For A Period Of Sixty (60) Days From The Date Of Submission. Bidding Documents May Be Obtained From The Bac Secretariat In The Municipal Hall On December 26, 2024 To January 14, 2025 Payment For Tender Docs. Five Thousand Pesos (p 5000.00) Each Non Refundable. The Bid Shall Include The Following Documents: Eligibility & Technical Documents * Dti Business Name Registration Or Sec Registration Certificate * Mayor's Permit Issued By The City Or Municipality * Statement Of All Its Ongoing And Completed Government And Private Contracts * Audited Financial Statement * Nfcc Computation * Tax Clearance Per Executive Order 398 Series Of 2005 * Philgeps Registration Certificate * Bid Security (bid Securing Declaration Or Surety Bond * Comformity With The Technical Specification And Schedule Of Requirements; If Appliable * Omnibus Sworn Statement Using The Prescribed Form In Bidding Form Section * Other Documents Required In The Instruction To Bidders ( If Any) All Bids Must Be Received On Or Before January 14, 2025 At 09:00 Am And Will Be Immediately Opened In Public In The Presence Of Bidders Representatives Who Choose To Attend At The Following Address: Bac Office, Municipal Hall Building Dumingag, Zamboanga Del Sur The Procuring Entity Reserves The Right To Reject Any Bid Or Waive Any Defect Or Formality. The Lowest Calculated And Responsive Bid Shall Be Used As The Criterion In The Award. The Procuring Entity Will Not Reimburse Any Expenses Related To The Preparation Of Bids. Sgd Al Rey L. Estillore Bac Chairman Bid Submitted By: Signature Over Printed Name Of Supplier Date : ____________________

Details: The assignment includes the delivery of timber to the municipality of Nordmaling during the specified time period. The wood will be used as material for pallets that...

Details: Description Item No. Unit Item Description Qty Unit Cost Total Cost 1 Lot Labor And Materials For The Rehabilitation And Repair Of Seaweed Culture Laboratory 1 3,500,000.00 1 Storey, 12m X 7.5m 1 Storey, 15.7m X 9m 1.general Requirements Mobilization And Demobilization 2. Architectural And Civil Works Clearing And Grubbing (216 Sq.m) - Transfer And Disposal Of Existing Furniture - Existing Lighting Fixtures -existing Paint On Walls Demolition Works (1 Lot) - Existing Pvc And Wooden Doors - Existing Concrete Pavement - Existing Wall (for Installation Of 60 X 60 Cm Aluminum Window) - Existing Jalousie Windows - Existing Tiles - Existing Stairs - Existing Gutters And Ceilings Repainting Of All Exterior And Interior Walls, Ceiling, Angle Bars, Laboratory Flooring, And Roofing (1,389.85 Sq.m) Excavation Of Pavement (50 Sq.m) Glass Door (1 Lot) Hardwares, Carpentry Materials, And Furniture (1 Lot) Tile Works (40.92 Sq.m) Structural Steel: Condenser Support (bracing), Stair Handrails (1 Lot) 4.5mm Fiber Cement Board On Metal Frame Ceiling (63.88 Sq.m) Plain Cement Floor Finish (61.75 Sq.m) Selected Borrow For Topping (3.54 Cu.m) Cement Plaster Finish (38.37 Sq.m) Chb Non-load Bearing (including Reinforcing Steel), 10mm (27.48 Sq.m) Pavement (50 Sq.m) Reinforced Steel Bars (deformed) Grade 33 (119.06 Kg) Structural Concrete: Stairs, Stiffener Column And Beam, Counter Twin Wall Polycarbonate Sheets (84 Sq.m) 2. Electrical And Plumbing Works Electrical Works (1 Lot) - Removal Of Existing And Damaged Lights - Supply And Installation Of Led Lights Including All Necessary Works For The Facility - Supply And Installation Of New Wires For Lights Plumbing Works (1 Lot) - Installation Of Water Closet With Wallhung Lavatory (3 Sets) - Replacement Of Stainless Steel Sinks - Foot-operated Stainless Steel Sinks (portable) - Replacement Of Plumbing Fittings Such As P-trap, Drain, And Faucets *note: Strictly Follow The Detailed Estimates Payment Will Be Processed Through Progress Billing Place Of Delivery: Seaweed Culture Laboratory Brgy. Cabalagnan, Nueva Valencia, Guimaras Delivery Period: Should Be Within One Hundred Twenty (120) Calendar Days

Details: Description A.contract Id : Antipolo-08january2025-09 B.name Of Project : Improvement Of Day Care Center And School Libraries At Brgy. Dela Paz And Brgy. San Roque, Antipolo City (2024 - Package 92) A.improvement Of Day Care Center At Purok Imelda Child Development Center, Brgy. Dela Paz, Antipolo City B.improvement Of School Libraries At San Roque National High School, Brgy. San Roque, Antipolo City C. Location : A. Brgy. Dela Paz, Antipolo City B.brgy. San Roque, Antipolo City D.brief Description : A. Improvement Of Day Care Center B.improvement Of School Libraries E.major Item Of Works : A. Tile Works; Repainting Of Wood Surfaces; Replacement Of Gutter And Downspouts B.improvement Of Flooring; Carpentry Works; Painting Works F.approved Budget For The Contract : Php 1,073,010.16 G.duration : 60 Cd. Republic Of The Philippines City Government Of Antipolo Invitation To Bid / Request For Expression Of Interest The City Government Of Antipolo Through The Bids And Awards Committee (bac), Invites Contractors Duly Registered With The Philippines Contractors Accreditation Board (pcab) To Bid For The Following Project/s Chargeable To Their Respective Funds. The Proponent – Contractor Is To Undertake The Proposed Project/s On A Turnkey Basis. The Bac Will Conduct The Procurement Process In Accordance With The Revised Irr Of R.a. 9184. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening Of Bid. To Bid For The Aforementioned Contract, A Contractor Must Purchase Bid Documents And Must Meet The Following Major Criteria (a) Filipino Citizen Or 75% Filipino – Owned Partnership, Corporation, Cooperative, Or Joint Venture, (b) With Pcab License Applicable To The Type, Kinds Of Project, Respective Size Ranges And Cost Of This Contract, (c) Completion Of A Similar Contract Costing At Least 50% Of Abc Within A Period Of L0 Years, And (d) Net Financial Contracting Capacity At Least Equal To Abc. The Bac Will Use Non-discretionary Pass / Fail Criteria In The Eligibility Check And Preliminary Examination Of Bids. Interested Contractors Shall Manually Submit Their Bids, Together With Their Duly Accomplished Bid Documents (sealed In Envelopes) Addressed To The Chairman Of The Antipolo City Bids & Awards Committee (acbac) And Shall Be Guided By Hereunder Listed Schedules Of Activities And Locations; Issuance Of Bid Documents: December 20, 2024 - January 08, 2025 @ 10:00 A.m.at Office Of The City Engineer, City Government Of Antipolo, Brgy. San Roque, Antipolo City Pre-bid Conference: December 27, 2024 @ 1:00 P.m. At 2nd Floor, Antipolo City Hall Building (main), M.l. Quezon, Cor. Carigma St. Brgy. San Roque, Antipolo City Submission Of Bids: January 08, 2025 Not Later Than 11:00 A.m. At 2nd Floor, Antipolo City Hall Building (main), M.l. Quezon, Cor. Carigma St. Brgy. San Roque, Antipolo City Opening Of Bids: January 08, 2025 @ 1:00 P.m. At 2nd Floor, Antipolo City Hall Building (main), M.l. Quezon, Cor. Carigma St. Brgy. San Roque, Antipolo City And Upon Payment Of Refundable Fee For The Bidding Documents, Pursuant To The Guidelines Issued By The Gppb, Per Schedule Of Values And/or Project Cost Payable To This City’s Treasurer’s Office. Partial Set Of The Subject Bid Documents May Also Be Downloaded Free Of Charge From The Website Of The Phil-geps And The Website Of This City While Its Completion May Be Purchased By Prospective Bidders As Stated. Bid Security Must Be In The Form Of A) Cash Or Cashier’s/manager’s Check, Issued By A Universal Or Commercial Bank, B) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Foreign Bank, C) Surety Bond Callable On Upon Demand Issued By A Surety Or Insurance Company Duly Certified By A Surety Or Insurance Company Duly Certified By The Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security, D) Bid Securing Declaration, And E) Any Combination Of Identified Forms. The City Government Of Antipolo Reserves The Right To Reject Any Or All Bids, To Declare A Failure Of Bidding, Waive Any Minor Defect Therein, And Accept The Offer Most Advantageous To The Government And Assumes No Responsibility Whatsoever To Compensate Or Indemnify The Bidders For Any Expenses Incurred In The Preparation Of The Bid. For Further Information Prospective And Qualified Bidders May Inquire At The Office Of The Bac Chairman, Through Its Secretariat At City Government Of Antipolo, Brgy. San Roque, Antipolo City. (sgd) Atty. Cedrick Justice U. Capiral Chairman Of The Bac

Details: Expressions Of Interest For Visitor Centre And Catering Swale Borough Council Is Seeking Expressions Of Interest (eoi) From Organisations / Parties To Operate, Occupy, Manage, And Maintain The Visitor Centre And Potential Catering Provision At Oare Gunpowder Works Country Park, Off Bysing Wood Road, Faversham, Kent, Me13 7ud. The Whole Site Measures 7.2ha In Total And Currently Consists Of The Visitor Centre, Toilets, Car Parking, Woodland And Open Space Interspersed With Historic Remains Of The Former Gunpowder Works, Leats (small Water Canals), Lake And Picnic Areas. Https://oaregunpowderworks.co.uk/ The Site Is A Scheduled Ancient Monument, Part Site Of Special Scientific Interest And Well Known For Both Its Heritage And Biodiversity Value. It Has Consistently Been Awarded Both Green Flag And Green Heritage Award Status And There Are Several External Groups Involved In Providing Volunteer Maintenance And Visitor Activities. We Have Been Welcoming Visitors For Nearly 20 Years Following Creation Of The Park With A Lottery Grant And Continue To Maintain The Site And Facilities Guided By Our Management Plan. We Believe The Site Has The Potential To Be A Bigger Tourist And Local Resident Destination With An All Year Round Offering. The Council Is Seeking An Experienced Operator Who Can Add Value To The Sites Offer To Visitors And Manage The Visitor Welcome And Experience By Operating The Visitor Centre And Unlocking And Locking The Site At Weekends And Bank Holidays, Under An Appropriate Agreement Commencing From 1 April 2025. The Visitor Centre Currently Consists Of:- • Heritage Displays • Environmental Displays • Toilets • Small Kitchen The Visitor Centre Is A Single Storey Former Cooperage Adjacent To The Car Park And Provides A Good Opportunity For A More Commercially Focused Provider To Deliver Visitor Welcome, Interpretation And Deliver A Food & Beverage Provision For The Country Park. The Internal Part Of The Building Currently Mainly Houses Heritage And Environmental Displays, With Education/volunteer Meeting Space. Bidders Are Advised To Inspect The Building And Carefully Consider The Cost Of Reconfiguring The Interior, Providing Catering Equipment And Any Necessary Works Or For Providing An Alternative Permanent Or Portable Additional External Catering Unit, Before Submitting Their Eoi, Especially Considering The Sites Scheduled Status. It Is Anticipated That Planning Permission And Scheduled Ancient Monument Consent Will Be Required For Significant Changes Or New Additions. In Addition To The Key Building, The Council Is Keen For The Site To Attract More Visitors To The Area, All Year Round, But In Particular During The Summer Season. Innovative Ideas Are Therefore Sought On What Additional Offering Could Be Created On The Site. As The Site Has Multiple Users, It Is Important Your Eoi Shows How You Will Balance And Work Alongside These, Attract New And Return Visitors. Groups Include The Friends Of Oare Gunpowder Works, Volunteers, Kcc Childrens Centre And A Home Education Group. It Is Expected That The Successful Applicant Will Provide The Chosen Service And Open And Close The Building To The Public All Year Round And During That Time Will Also Open The Adjacent, Access, Car Park And Public Toilets. It Is Anticipated That The Council Will Continue To Provide Basic Grounds Maintenance Services To The Whole Site, While Building Maintenance Of The Visitor Centre Will Be The Responsibility Of The Tenant, Potentially Full Repairing, Depending Upon The Facilities Use, Length And Nature Of The Agreement. Please Submit Your Eoi By 12 Noon 24th January 2025 To Graemetuff@swale.gov.uk. Please Include The Following Information: • Type Of Legal Agreement Preferred E.g., Lease/licence Agreement And The Length Proposed. • Annual Rent Being Offered To Sbc And/or And Other Commercial Offering E.g., Profit Share Etc Plus Any Considerations Around Phased Payment Against Capital Investment. • Basic Business Plan That Demonstrates That The Proposal Is Viable And Sustainable For The Duration Of The Legal Agreement. • Your Business Plan Should Include The Following: • Proposed Use Of The Building • The Type Of Any Food & Beverage To Be Offered. • Proposals To Maximise Sustainability – Reduce Energy Consumption, Reduce Waste, Maximise Recycling. • Proposed Opening Dates And Times (noting Existing Site Opening & Closing) • Marketing Proposals • Financial Projections Demonstrating A Strong Viability, Showing Profit & Loss Forecasts And Any Surplus In Addition To A Cash-flow For At Least 2 Years, • Details Of How Any Repairs And Improvements Will Be Funded (e.g., Grant Funding, Personal Savings, Temporary Rent Concession, Etc). • Evidence Of Previous Experience/operations Of A Similar Nature Supporting Documents • A Site Location Plan • A Visitor Centre Layout Plan • The Current Site Visitor Leaflet Should No Viable Business Plan Be Submitted, The Council Will Consider Alternative Uses For The Building. Please Email Graemetuff@swale.gov.uk For Further Information Or To Arrange To View The Premises. It Is Proposed That The Building Will Be Made Available To View Internally From 9th December 2024 By Appointment.

Details: This Is A Sources Sought Notice Only. This Is Not A Request For Proposals Or Invitation For Bid. There Is Not A Solicitation, Specifications, Or Drawings Available At This Time.the National Park Service (nps), Contracting Operations (conops) West Is Seeking Qualified Small Business Firms Capable Of Performing Construction Services At Golden Gate National Recreation Area, Stinson Beach, California. The Contract Resulting From The Solicitation Will Require That Contractors Manage Multiple Construction Fields And Components. Description: Replace Stinson Beach Lifeguard Tower And Visitor Snack Bar.this Project Will Encompass Multiple Construction Components And Will Require A Contractor To Be Knowledgeable Of Both State And Federal Regulations As Well As Natural Resource Protection, Specifically Dunes, While Working In Marine/coastal Conditions. The Projected Scope Of Work Will Include Complete Facility Demolition, Materials Testing, Potential Hazardous Material Abatement, And The Proper Disposal Of All Materials. Construction Will Include Wood And Deep Concrete Pile Driving, Concrete Foundation Construction, Site Utilities Work (gas, Electric, Communications), Water & Wastewater , Hvac, Commercial Kitchen Installation, Structural Steel Construction, Tower Observation Platform/lantern Installation, Finish Quality Exterior And Interior Carpentry, And Asphalt/concrete Paving. The Selected Contractor Will Be Responsible For All Labor, Supervision, Engineering, Permitting, Materials, Equipment, Tools, Parts, Supplies, And Transportation To Perform The Services Described In The Specifications And Drawings For The Project. Pmis #¿s: 318662, 326935, 342029 The North American Industry Classification System (naics) Code For This Requirement Is 236220, Commercial And Institutional Building Construction. The Small Business Size Standard Is $45,000,000.project Magnitude: Between $1,000,000 And $5,000,000.if You Are Interested, Please Submit Your Response Electronically Via Email To Juan_roman@nps.gov By The Response Date Of January 10, 2025, At 4:00pm Pst. If You Chose To Submit A Package, Clearly Identify The Notice Number 140p8525r0003 In The Title Of The Email And On All Documents. It Is Requested That Interested Small Businesses Submit A Response That Demonstrates The Ability To Perform The Services Described.all Responses Should Include: (1) The Attached Contractor Information Form.(2) Capabilities Statement For Your Company. The Capabilities Submitted Should Demonstrate Same Or Similar Experience. (3) Information On Past Projects. All Past Projects Must Have Been Completed Within The Last 5 Years From The Response Date Of This Notice. Projects Should Demonstrate Experience That Encompasses A Variety Of Construction Services In The Cost Range Described Above. A Maximum Of 10 Detailed Project Descriptions May Be Submitted. A List Of Other Projects Completed Within The 5-year Time Span May Also Be Submitted. Project Information Should Contain A Project Description, Contract Number, Dollar Amount Including % Over / Under Project Budget, Change Orders Total Cost And % Of Final Costs, Duration Including % Over / Under Initial Schedule, Project Tracking And Communications Tools Used, Location, Customer Point Of Contact Information Including Email And Telephone, And Any Other Pertinent Information.(4) Under Far 52.219-14, Limitations On Subcontracting, The Employees Of Each Small Business Must Perform At Least 15% Of The Work As Measured By The Dollar Value Of Their Task Order Contract. The 15% Shall Not Include The Costs For Materials. Responses Must Include A Description As To How Your Small Business Would Meet This Far Requirement.response To This Announcement Is Strictly Voluntary; No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought Announcement Or Any Follow-up Information Requests. Analysis Of The Quantity And Quality Of Responses To This Sources Sought Announcement Will Be Considered In The Market Research Being Conducted, And In The Making Of Any Small Business Set-aside Determination For This Requirement.the Government Anticipates Conducting A Competitive Acquisition For This Requirement. The Amount Of Interest Or Lack Thereof Will Determine The Possibility Of A Competitive Set-aside Or Full And Open Competition (the Size Of A Small Business Firm Includes All Parents, Subsidiaries, Affiliates, Etc.-see 13 Cfr 121.108.) Misrepresentation Of Size Status Can Result In Penalties. Please Refer To The Current Sba Rules Regarding Hubzone Firms, Effective October 1, 2011.the Information Provided In This Notice Is Subject To Change And In No Way Binds Nps To Solicit For Or Award A Contract. Nps Will Not Provide Debriefs On The Results Of This Research, But Feedback Regarding The Decision To Set Aside Or Not Aside The Procurement Will Be Accomplished Via Pre-solicitation Synopsis Or Solicitation For These Services As Applicable. All Information Submitted Will Be Held In A Confidential Manner And Will Only Be Used For The Purpose Intended. Points Of Contact Listed May Be Contacted For The Purpose Of Verifying Performance.

Details: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12 And Part 13, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. Solicitation Number 70z03825qs0000001 Is Issued As A Request For Quotation (rfq). This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-01, Effective November 12, 2024. the Applicable North American Industry Classification Standard Code Is 238210. The Small Business Size Standard Is $19.0 Million. This Is A Total Small Business Set-aside Requirement. All Responsible Small Business Sources May Submit A Quotation. it Is Anticipated That A Firm-fixed Price Purchase Order Will Be Awarded To A Small Business On A Competitive Basis As A Result Of This Synopsis/solicitation. A Physical Site Visit Will Be Required And Must Be Scheduled Through The Primary Point Of Contact Shown On This Notice. Site Visits Will Not Be Scheduled After January 29, 2025, At 12:00pm. Contractors Must Provide The Requirements Of The Attached Statement Of Work To Be Considered. Contractors Having The Expertise And Capabilities To Provide These Items Are Invited To Submit Offers In Accordance With The Requirements Stipulated In This Solicitation. the Following Documents Are Attached: statement Of Work – 70z03825qs0000001 terms And Conditions – 70z03825qs0000001 instructions To Offerors – 70z03825qs0000001 wage Determination (nc) 2015-4405 Rev 27 closing Date And Time For Receipt Of Offers Is 30 January 2025 At 12:00 Pm Est. Quotes And Questions Shall Be Submitted By Email To Jeremy.a.wood@uscg.mil. Please Indicate Solicitation 70z03825qs0000001 In The Subject Line. Phone Calls Will Not Be Accepted. notice For Filing Agency Protests united States Coast Guard Ombudsman Program it Is The Policy Of The United States Coast Guard (uscg) To Issue Solicitations And Make Contract Awards In A Fair And Timely Manner. The Ombudsman Program For Agency Protests (opap) Was Established To Investigate Agency Protest Issues And Resolve Them Without Expensive And Time- Consuming Litigation. Opap Is An Independent Reviewing Authority That Is Empowered To Grant A Prevailing Protester Essentially The Same Relief As The Government Accountability Office (gao). interested Parties Are Encouraged To Seek Resolution Of Their Concerns Within The Uscg As An Alternative Dispute Resolution (adr) Forum Rather Than Filing A Protest With The Gao Or Some External Forum. Interested Parties May Seek Resolution Of Their Concerns Informally Or Opt To File A Formal Agency Protest With The Contracting Officer Or Ombudsman. informal Forum With The Ombudsman. Interested Parties Who Believe A Specific Uscg Procurement Is Unfair Or Otherwise Defective Should First Direct Their Concerns To The Applicable Contracting Officer. If The Contracting Officer Is Unable To Satisfy Their Concerns, Interested Parties Are Encouraged To Contact The U.s. Coast Guard Ombudsman For Agency Protests. Under This Informal Process The Agency Is Not Required To Suspend Contract Award Performance. Use Of An Informal Forum Does Not Suspend Any Time Requirement For Filing A Protest With The Agency Or Other Forum. In Order To Ensure A Timely Response, Interested Parties Should Provide The Following Information To The Ombudsman: Solicitation/contract Number, Contracting Office, Contracting Officer, And Solicitation Closing Date (if Applicable). formal Agency Protest With The Ombudsman. Prior To Submitting A Formal Agency Protest, Protesters Must First Use Their Best Efforts To Resolve Their Concerns With The Contracting Officer Through Open And Frank Discussions. If The Protester’s Concerns Are Unresolved, An Independent Review Is Available By The Ombudsman. The Protester May File A Formal Agency Protest To Either The Contracting Officer Or As An Alternative To That, The Ombudsman Under The Opap Program. contract Award Or Performance Will Be Suspended During The Protest Period Unless Contract Award Or Performance Is Justified, In Writing, For Urgent And Compelling Reasons Or Is Determined In Writing To Be In The Best Interest Of The Government. The Agency’s Goal Is To Resolve Protests In Less Than 35 Calendar Days From The Date Of Filing. Protests Shall Include The Information Set Forth In Far 33.103(d) (2). If The Protester Fails To Submit The Required Information, Resolution Of The Protest May Be Delayed Or The Protest May Be Dismissed. To Be Timely Protests Must Be Filed Within The Period Specified In Far 33.103(e). Formal Protests Filed Under The Opap Program Should Be Submitted Electronically To Opap@uscg.mil And The Contracting Officer Or By Hand Delivery To The Contracting Officer. election Of Forum. After An Interested Party Protests A Coast Guard Procurement To The Contracting Officer Or The Ombudsman, And While The Protest Is Pending, The Protester Agrees Not To File A Protest With The Gao Or Other External Forum. If The Protest Is Filed With An External Forum, The Agency Protest Will Be Dismissed. the Ombudsman Hotline Telephone Number Is 202.372.3695.

Details: Description Republic Of The Philippines Province Of Leyte Municipality Of Inopacan Barangay Caminto Invitation To Bid For The Supply Of Materials For The Rehabilitation Of Multi-purpose Hall 1. The Barangay Caminto Inopacan, Leyte, Under The 20% Barangay Development Fund, Intends To Apply The Sum Of Two Hundred Sixty-six Thousand Eight Hundred Thirty-six Pesos And 50/100 Only (php266,836.50) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply Of Materials In The Rehabilitation Of Multi-purpose Hall. 2. The Barangay Caminto Inopacan, Leyte Now Invites Bids For The Supply Of Materials In The Rehabilitation Of A Multi-purpose Hall. Item Number Description Unit Quantity 1 3/4"x4"x8' Marine Plywood 3 Shts 2 2"x4"x1.5mm Square Tube 8 Pcs 3 2"x2" Angle Bar 7 Pcs. 4 1-1/2" Metal Screw 300 Pcs 5 2"x3"x12' Good Lumber 10 Pcs 6 2"x2"x12' Good Lumber 12 Pcs 7 Welding Rod 2 Boxes For Wooden Wall Works: 8 1/4"x4'x8' Cement Board 17 Shts 9 2"x2"x8' Good Lumber 50 Pcs 10 #3 Cwn 3 Kgs 11 #4 Cwn 2 Kgs 12 1-1/2" Nails For Cement Board 1 Kgs 13 1/4"x4'x8' Marine Plywood 15 Shts 14 2"x2"x8' Good Lumber 72 Pcs 15 #3 Cwn 2 Kgs 16 Finishing Nails 1 Kgs 17 55cmx110cm Glass Windows(including Installation) 15 Sets 18 10 Watts Led Bulb 15 Pcs 19 3 Gang Switch 5 Pcs 20 3 Gang Outlet 3 Pcs 21 3.5mm*2 Thw Stranded Wire 2 Rolls 22 20 Amperes Circuit Breaker 4 Pcs For Wooden Floor: 23 Polyurethane Floor Varnish Topcoat 9 Gals 24 Sanding Paper 20 Pcs 25 Marine Epoxy 3 Gals 26 Flat Latex Paint 14 Gals 27 Paint Roller With Pan 6 Pcs 28 #4 Paint Brush 5 Pcs 29 Paint Thinner 3 Gals 30 Sanding Paper 20 Pcs For Scaffolding: 31 2"x3"x12 Coco Lumber 50 Pcs 32 Assorted Cwn 5 Kgs For Cement Plaster: 33 Portland Cement,40kg 30 Bags 34 Washed Sand 3 Cu.m For Scaffolding: 35 2"x3"x12' Coco Lumber 30 Pcs 36 Assorted Cwn 3 Kgs Delivery Of The Goods Is Required For Ten (10) Days. Bidders Should Have Completed A Contract Like The Project Within One Year (1) From The Date Of Submission And Receipt Of Bids. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii—instructions To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. (i) Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Under Ra 5183. 3. Interested Bidders May Obtain Further Information From Barangay Caminto, Inopacan Leyte, And Inspect The Bidding Documents At The Address Below From 9:00 Am-5:00 Pm. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 18, 2024 - January 7, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Under The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php500.00). 5. The Barangay Caminto Inopacan, Leyte Will Hold A Pre-bid Conference On December 26, 2024, At 9:00 Am At Barangay Hall Of Caminto Inopacan Leyte Which Shall Be Open To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 7, 2025, At 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 7, 2025@9:15 Am At Barangay Hall Of Caminto Inopacan Leyte. Bids Will Be Opened In The Presence Of The Bidder Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Barangay Caminto Inopacan, Leyte Reserves The Right To Reject All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Before Contract Award Under Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidder 8. For Further Information, Please Refer To: Efren Costamero Bac Chairman Barangay Caminto Inopacan Leyte-6522 Hon. Efren Costamero Bac Chairman

Details: Federal Highway Administration eastern Federal Lands Highway Division sources Sought Announcement No. 693c73-25-ss-0005 george Washington & Jefferson National Forests project Va Erfo Fs Gwjef808 2020-2(1) submittal Information issue Date: December 18th, 2024 due Date For Responses: January 17th, 2025 2:00 Pm Est submit Responses To: Mr. Michael Sun At Eflhd.contracts@dot.gov submittals Should Be Made In Electronic Format Only synopsis: this Is A Sources Sought Announcement And Is For Information Purposes Only. This Is Not A Request For Proposals, Quotations, Or Bids. No Solicitation Is Currently Available. The Purpose Of This Announcement Is To Determine The Availability And Capability Of All Qualified Sources For A Construction Project Involving Slide Repairs And Extensive Soil Nail/gabion Wall Construction In George Washington And Jefferson National Forests, Located In Bedford, Scott, Tazewell, And Wythe Counties, Virginia. the Project Consists Of Traffic Closure, Drainage Replacements, Articulated Block And Reinforced Concrete Pavement, Temporary Bridges, Bridge Scour Repairs, Streambank Revetment, And Other Miscellaneous Work. The Primary Objective Of The Proposed Contract Is To Repair Damage From These Erfo Events On All Sites. the Work Is Divided Into Bid Schedules As Follows: schedule A (base Contract) - Little Stony Road (fsr-700). The Work Includes Geotechnical Slide Repairs With Soil Nail Walls. There Are 2 Proposed Walls Of 105 And 55 Feet Long. Shoring And Bracing Will Be Required To Construct The Wall. The Gravel Roadway Resurfacing Will 400 Feet Long. The Road Will Be Closed During The Construction. schedule B (option 1) - Punch And Judy Road (fsr-618). The Work Includes Geotechnical Slide Repairs With An Approximately 400-foot-long Soil Nail Wall And 61-foot-long Gabion Basket Wall. Shoring And Bracing Will Be Required To Construct The Wall. The Gravel Road Resurfacing Will Be Approximately 1,030 Feet Long. The Rock Cut Slope Will Receive Wire Mesh Draped Rockfall Protection. The Road Will Be Closed During The Construction. schedule C (option 2) - Dry Run Road (fsr-14). The Work Includes Replacing An Undersized Pipe Culvert With A 4-foot Span By 3-foot Rise Concrete Box Culvert With Articulated Block To Reinforce Approaches, Surfacing Aggregate For Spot Repair Of Road Surface, And 3 Locations Of Slope Revetment With Riprap And To Repair Scour Holes Under 2 Bridge Abutments. The Road Will Be Closed During The Construction. schedule D (option 3) - Hussy Mountain Horse Camp Road (fsr-14a). The Repair Work Includes Replacing The Existing Damaged Wooden Low Water Crossing (lwc) With A 10-foot Span By 4.5-foot Rise Reinforced Concrete Open Bottom Box Culvert, Construction Of Minor Reinforced Concrete Pavement To Reinforce The Lwc Approaches, Raising The Existing Approximately 0.1-mile Long Travel Way Surface By 2-3 Feet With Crushed Aggregate, Drainage Improvements, Replacement Of The Wooden Fence And Metal Gate, And Approximately 60 Feet Long Riprap Revetment At Stream Bank. The Existing Water Line Pvc Pipe Connected To The Existing Wooden Lwc Will Need To Be Protected During The Construction And Reattached To The New Lwc. The Road Will Be Closed During The Construction. schedule E (option 4) - Blackhorse Gap East Road (fsr 186). The Existing Triple Culvert (60-inch Span By 46-inch Rise Pipe Arches) Lwc Will Be Replaced With A 19-foot Rise By 5.5 Foot Span Open Bottom Concrete Culvert. The Profile Will Be Raised About 2 Feet. The Culvert Approaches With Be Paved With Minor Reinforced Concrete Pavement At The Culvert Approaches To Strengthen And Eliminate Section Loss. Riprap Will Be Placed To Protect Stream Banks. The Work Will Require A Temporary Bridge Placed Next To The Existing Structure During The Construction So That The Local Traffic Can Be Maintained. the Federal Highway Administration (fhwa), Eastern Federal Lands Highway Division (eflhd), Anticipates Awarding A Construction Contract No Earlier Than September 2025. The Cost Of The Entire Project Is Estimated To Be Between $5,000,000.00 To $10,00,000.00. qualified Prime Contractors Shall Submit The Following Information By E-mail To Eflhd.contracts@dot.gov (attn: Mr. Michael Sun No Later Than 2:00pm (est) On January 17th, 2025. 1. A Positive Statement Of Your Intention To Submit A Bid For The Solicitation When It Is Issued As A Prime Contractor Containing Your Full Business Name, Address, Point Of Contact, Phone Number, E-mail Address, And Web Site (if Any). 2. Your Firm’s Size Standard Under Naics Code 237310; Highway, Street And Bridge Construction ($45 Million). All Firms Shall Be Certified And Registered Under The Naics Code 237310 In The System For Award Management (sam) Located At Https://www.sam.gov/ Prior To The Submission Of Bids Or Proposals. 3. Identify All Applicable Classifications For Your Firm Such As Small Business; Woman-owned Small Business; 8(a) Small Business; Small-disadvantaged Business; Hubzone Small Business; Service-disabled Veteran-owned Small Business; Etc. This Information Must Be Provided To Determine Whether The "rule Of 2" Has Been Met For Any Socio-economic Category For Set-aside Purposes. Please Note That The Size Of A Small Business Firm Includes All Parents, Subsidiaries, Affiliates, Etc. Refer To The Code Of Federal Regulations 13 Cfr 121.103 For Information On How The Sba Determines Affiliation And 13 Cfr 121.108 Regarding The Penalties For Misrepresentation Of Size Status. 4. Offeror's Ability To Perform At Least 50% Of The Total Amount Of Work To Be Performed Under The Contract As A Large Business Prime Contractor Per Far Clause 52.236-1 – Performance Of Work By The Contractor; Or Ability To Perform At Least 15% Of The Cost Of Contract Performance Effort With Its Own Workforce As A Small Business Prime Contractor Per Far Clause 52.219-14 Limitations On Subcontracting. 5. Offeror's Capability To Perform A Contract Of This Magnitude And Complexity Including Specialized Construction, Soil Nail Walls, Gabion Baskets, Temporary Bridge, Slide Repairs, Road Resurfacing, And Concrete Box Culverts Within The Past 5 Years, Including A Brief Description Of The Project, Customer Name, Timelines Of Performance, Customer Satisfaction, And Dollar Value Of Project. If A Member Of A Joint Venture (jv), The Offeror Should Include Relevant Information From Both Members Of The Jv. 6. Offeror's Experience In Coordinating With Multiple Federal, State, And Local Agencies For The Successful Completion Of A Construction Project Performed Within The Last 5 Years, Including A Brief Description Of The Project, Customer Name, Timelines Of Performance, Customer Satisfaction, And Dollar Value Of Project. If A Member Of A Joint Venture, The Offeror Should Include Relevant Information From Both Members Of The Jv. 7. Commercial And Government Entity (cage) Code And Unique Entity Id; If A Member Of A Joint-venture (jv) Or Mentor-protégé Agreement With The Sba, Please Provide Information On Both Members Of The Jv. 8. Please Provide Your Current Per Contract And Aggregate Bonding Capacities. responses To This Source Sought Announcement Shall Be Limited To 5 Pages, Single-spaced, With Font Size 12 Or Larger Using Times New Roman Or Arial. Page Margins No Smaller Than 1” And Page Size Shall Be No Greater Than 8.5” X 11.” Submission Shall Be Provided In Electronic Format Readable And Searchable By Adobe Acrobat Or Microsoft Word. Do Not Submit Marketing Material, Slide Presentations, Or Technical Papers. Do Not Submit Resumes. please Reference “sources Sought Announcement No. 693c73-25-ss-0005 For Project Va Erfo Fs Gwjef808 2020-2(1)” In The Subject Line Of Your Email.