Wood Tenders

Description: Condemned Unreleased Steel Structural Member And Scrap Gi Sheet Of Col No J22 - M22 To J27 - M27 [excluding Col J27- M27] Of Turning And Fitting Section Shed [ Sl No- 26 ], Qty- Scrap Steel- 395 Mt, Scrap Cgi Sheet - 30.5mt, Total 425.5 Mt. Above Mentioned Condemned Structure Are Offered Excluding Brick Works And Wooden Works. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Condition-1] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose, 2] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot, 3] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 4] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures, 5] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 6] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Property In Near Vicinity, 7] No Explosives Can Be Used For Demolishing, 8] If Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 9] Materials Will Be Sold On "as Is Where Is" Basis , 10] Delivery Will Be Done On Actual Weighment Basis, Rly. Weigh Bridge Is Available At Bscl Premises For Weighment.

Description: The Professional Cooperative Wood And Metal Will Every Interessed Company In The Pool Agreement Accept Which The Defined Admission Requirements Meets And The Corresponding Documents Included. Then, in a second stage, a selection procedure will take place. For each vehicle category Will a single selection procedure be implemented and a framework agreement vehicle sale concluded. The selection procedure successes Based on the respective vehicle descriptions After the price. Since For Die Bghm In particular, a frictionless procedure Important Is there to be a test phase. Objective Is The conclusion of each 2 To Maximum 5 Contracts In Pro Arealess With Suitable Contract Partners, The Used Vehicles According to the sub-point 1.3 Ff. The Bghm Shopping For detailed procedure See also document 01 Process description Sale. Objectives of the procedure Are in particular: — Continuing an economic sale for the Bghm, — Transparency to be established among the interested parties, — The expense of handling Simple And Gering To Hold, — A Reliable And Fast settlement The vehicles are usually Mind. 12 To Max. 18 months old And Have A Different Running Power, Typically From 10 000 Km. This information is subject to fluctuations. The vehicle types (product type, manufacturer, motorization etc.) Change, Since The Bghm The vehicles From the respective framework contract of the Kdb purchased.01. The Procurement Is Related To A Project And/or Programme Financed By European Union Funds: No

Description: Contract notice – general guideline, standard rule open procedure (construction work) 2886 Alexander-von-Humboldt School Aßlar; continuation of overall renovation 4.ba basement renovation; ventilation work Ventilation work 2886 Alexander-von-Humboldt School Aßlar; continuation of overall renovation ... More2886 Alexander-von-Humboldt School Aßlar; continuation of overall renovation 4.ba basement renovation; ventilation work Ventilation work 2886 Alexander-von-Humboldt School Aßlar; continuation of overall renovation 4.ba basement renovation; ventilation work Transport, installation and commissioning of 3 ventilation units with 10,200 m³/h, 3,000 m³/h and 1,400 m³/h for ventilating 4 specialist classes, a wood workshop in the basement and a science and technology area on the ground floor; assembly of the units in a ground-level ventilation center; Distribution of supply and exhaust air via ducts and pipes below the ceiling, approx. 540 m² of duct and duct fittings, approx. 110 m of spiral-seam duct DN 100-DN 700; installation and mortaring of approx. 15 fire dampers in solid and lightweight stud walls; installation of supply and exhaust air boxes in grid ceilings; laying of electrical connections. Dismantling of 2 supply and exhaust air units and one supply air unit.

Description: CATEGORY: Alpha-Napthaleneacetic acid 25gm , Azino bis-3 - 1gm , Ammonium Persulphate 500gm , Aminomethane 100 gm , Anthrone 25 gm , Ammonium ceric nitrate 25gm , Azomethane-H 5 gm , Bromocresol green 25gm , Bromosol green 125 ml , Bromothymol-Blue indicator 25 gm , Butyric acid 100 gm , Colchicine 10 gm , Carboxymethyl Cellulose Sodium Salt 500 gm , Coomassie brilliant blue-g 50 gm , Diactyl-flurescein 25 gm , Flurescein sodium 100 gm , IAA Solution plant culture 20ml , L-glutamine 25 gm , Murexide 100gm , Cetyltrimethyl Ammonium Bromide 500gm , Ninhydrin 10 gm , N-Napthaleneacetic acid 100gm , Peridic acid 100 gm , Phenopthalein 100 gm , P-Nitrophenol indicator 100 gm , P-Nitrophenol Phosphate di-Sodium salt 25 gm , p-Nitropheny-a-D-Glucopyranoside 25 gm , Potassium ferrocynide 500 gm , Potassium Iodide 100gm , Safranine 25 gm , Solochrome-black 25 gm , Stannous chloride , Thionine 5 gm , Thymol 100gm , Tri-phenyl Tetrazolium Chloride 10 gm , Tri-phenyl tetrazolium formazan 25 gm , Tris Hydroxymethyl- Aminomethane Maleate 100 gm , Trypsin 25gm , Amber color Volumetric flask 100 ml , Amber color Volumetric flask 50 ml , Measuring Cylinders 1000 ml , Kjeldahl Distillation Tube stands , Glass Measuring cylinder 1000ml , Beaker 1000 ml , Beaker 2000ml , Porcelain Buchner Funnel , Glass Dispensor 10 ml , Glass Dispensor 20 ml , Conical Plask 50 ml , Conical Plask 100 ml , Plastic Droper Bottle 50 ml , Plastic Measuring Cylinder 50 ml , Plastic Measuring Cylinder 100 ml , Plastic Funnel medium size , Plastic Burette Stands , Micro pipette 10ml , Micro Pipette Stands , Auto Dispensers 25 ml , Auto Dispensers 50 ml , Plastic Vol. Flask 50 ml , Plastic Vol. Flask 100ml , Plastic Rod , Plastic Distil Water Bottle 500ml , Tissue Rolls 1 KG , Laboratory Gloves Small , Laboratory Gloves Big , Wood Mortar and pestle 5kg , Porcelain Mortar and Pestle Set Medium size

Description: Scrap Abandoned Qtrs (1)lot No-sse/works/gaya(lot No-42),location-loco Colony Gaya-abandoned Qtr. No.-96/a To E, Type-ii (05 Unit) 97/a To E, Type-ii (05 Unit), 99/a To D, Type-ii (04 Unit), 100/a To C, Type-ii (03 Unit), 153/a To K, Type-i (11 Unit), 154/a To L, Type-i (12 Unit), 155/a To H, Type-i (08 Unit) 345/a To B, Type-ii (02 Unit), 261/a To B, Type-i (02 Unit), 302/a To C, Type-i (03 Unit), 342/a To B, Type-i (02 Unit), 338/a To C, Type-i (03 Unit), 344/a To C, Type-i (03 Unit), 259/a To B, Type-ii, (02 Unit), 304/a To E, Type-i,(05 Unit), 303/c To J, Type-i, (08 Unit), 296/a To D, Type-i,(04 Unit), 294/c To D, Type-ii, (02 Unit), 293/a To E, Type-ii, (05 Unit), 292/b To C, Type-ii, (02 Unit), 290/a To F, Type-i, (06 Unit), 290/i To N, Type-i, (06 Unit), 289/b To K, Type-i, (10 Unit), 347/c To D, Type-ii, (02 Unit), 488/a To D, Type-i, (04 Unit), 502/a To D, Type-i, (04 Unit), 503/a To D, Type-i, (04 Unit), 504/a, Type-ii, (01 Unit), 539/a To D, Type-i, (04 Unit), 585/b To D, Type-i, (03 Unit), 587/a To D, Type-i, (04 Unit), 490/a To B, Type-i, (02 Unit), 492/a To D, Type-i, (04 Unit), 493/a To D, Type-i, (04 Unit), 495/a To D, Type-i, (04 Unit), 548/a To B, Type-ii, (02 Unit),547/a To B, Type-ii, (02 Unit), 505/a, Type-ii, (01 Unit), 504/a, Type-ii, (01 Unit), 524/a, Type-ii, (01 Unit),= 431/a To D, Type-i, (04 Unit), 444/a To E, Type-i, (05 Unit), 374/a, Type-ii, (01 Unit), 454/a, Type-ii, (01 Unit), 561/a, Type-ii, (01 Unit), 371/a To B, Type-ii, (02 Unit), 372/a To B, Type-ii, (02 Unit),discription Of Material-bricks,bricks Bat,steel,wood,lime Concrete

Description: Allocation No.21213304.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Memu Tr. Coach Body Bearing Nos.[1]er/22050/asn,[2]er/22060/asn, [3]er/22061/asn, [4] Er/2085b/asn, [5] Er/2083b/asn,[6] Er/22069/asn, Total Qty-06 Nos. To Be Sold With All Available Fittings But Without Excluded Fittings. Excluded Fittings Are 02nos. Of Bogie [per Coach] With Available Fittings Including Spring, 04 Nos Of Brass Wearing Piece & 4 Nos Of Brake Cylinders From Each Coach & 04 Nos. Of Wheel Sets (per Coach) With Available Fittings & Non-ferrous Attachment If Any Are Excluded From Sale And Will Be Returned To The Custodians As Per Extent Procedure. Approx Saleable Weights Of Condemned Memu Tr. Coaches Are Included With The Un-serviceable Items, Ferrous-iron, N- Ferrous/ Other¿s Items .i.e. Un-serviceable Aluminium Window Guide Frame- (07nos In 40.95kg Approx For Coach Sl-1&2, 13nos. In 76.05kg. Approx For Sl-3, 16nos. In 93.60kg Approx For Sl-4, 09nos. In 52.65kg. Approx For Sl-5& 10nos. In 58.50kg. Approx For Sl-6), Aluminium-(approx.0.1kg. For Each Coaches), Bronze -(approx. 0.6kg. For Each Coaches), Copper Cable-(approx. 121.49 Kg. For Coach Sl-1,4,5& 6, 119.74kg For Sl-2 & 121.14kg For Sl-3 ), Rubber/wood/fibre-(approx. 2444.19 Kg. For Coach Sl-1, 2442.54 Kg. For Sl-2, 2408.76 Kg. For Sl-3, 2391.54 Kg. For Sl-4, 2432.49 Kg. For Sl-5 & 2426.64 Kg. For Sl-6), S.s. Trough Floor-(approx. 930 Kg. For Each Coaches) Etc. Which Are Unserviceable And Non-returnable. Location- Lying At Trg. Yard/hlr. After Sale, Coaches Will Be Handed Over To Purchaser For Dismantling And Cutting At Trg.yard/hlr. Cutting And Dismantling Of Coaches Is To Be Made At Trg. Yard/hlr By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. Returnable Items Of Sold Coaches Are To Be Returned To The Custodian Before Delivery.

Description: CATEGORY: Steel Tubes, Tubulars and Other Steel Fittings as per IS 1239 (Part 2 - Steel Pipe Fittings) (Q3) , Push cock 5 mm dia brass CP , Glass corner Shelve with CP bracket 10 inch x 10 inch x8 mm , Glass pane plain 3 mm thick , Grating CP 100 MM CP Ring not less than 100 gram , Hinges butt brass 50 mm , Hinges butt MS 75 MM ISI marked , Hinges butt MS 100 mm Stainless steel , Hinges butt MS 150 mm ISI Marked , M-seal 5 kg As per sample , Nails 32 mm As per Sample , Nails 75 mm As per Sample , Nails 40 mm As per Sample , Nails 50 mm As per Sample , Nails 100 mm As per Sample , Nails 25 mm As per Sample , Nails Cement 75 mm Asper sample , Nails Cement 100 mm Asper sample , Nahani trap floor grating 100mm dia , Paint synthetic enameled Grey , Paint synthetic enameled White , Paint synthetic enameled Black , Paint synthetic enameled yellow , Paint synthetic enameled Blue , Paint synthetic enameled PO red , Paint synthetic enameled Aluminium , Sliding door bolt 250 mm Brass , shower rose 15 mm CP , SS Grating 75 mm , SS Grating 100 mm , SS Grating 125 mm , Tower bolt Aluminium 75 mm ISI Marked , Tower bolt 150 mm brass ISI Marked , Tower bolt 200 mm brass ISI Marked , Touch wood as per sample , Wash hand basin 550x400 mm , Pvc push cock 15 mm male , Pvc push cock 15 mm female , Rubber washer 15 mm for pvc connection pipe and bib cock , Taflon tape threades sealent 12 point 5 mmx 12 mtrs , Tank Nipple GI 15 MM , Tank Nipple GI 20 MM , Tank Nipple GI 25 MM , Tank Nipple GI 40 MM , Tank Nipple GI 50 MM , HEX nipple 15 mm , HEX nipple 20 mm , HEX nipple 25 mm

Description: Allocation No.21213304.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Memu Tr. Coach Body Bearing Nos.[1] Er/22096/asn, [2] Er/22101/asn, [3] Er/22059/asn, [4] Er/22048/asn , [5] Er/22058/asn. Total Qty-05 Nos. To Be Sold With All Available Fittings But Without Excluded Fittings. Excluded Fittings Are 02nos. Of Bogie [per Coach] With Available Fittings Including Spring, 04 Nos Of Brass Wearing Piece & 4 Nos Of Brake Cylinders From Each Coach & 04 Nos. Of Wheel Sets (per Coach) With Available Fittings & Non-ferrous Attachment If Any Are Excluded From Sale And Will Be Returned To The Custodians As Per Extent Procedure. Approx Saleable Weights Of Condemned Memu Tr. Coaches Are Included With The Un-serviceable Items, Ferrous-iron, N- Ferrous/ Other¿s Items .i.e. Un-serviceable Aluminium Window Guide Frame- (16nos. In 93.60kg Approx For Coach Sl-1, 14nos. In 81.90kg. Approx For Sl-2, 17nos. In 99.45kg Approx For Sl-3, 08nos. In 46.80kg. Approx For Sl-4 & 11nos. In 64.35kg. Approx For Sl-5), Aluminium-(approx.0.1kg. For Each Coaches), Bronze -(approx. 0.6kg. For Each Coaches), Copper Cable-(approx. 121.49 Kg. For Coach Sl-1&2, 110.99 Kg. For Sl-3&4, 118.69 Kg. For Sl-5), Rubber/wood/fibre-(approx 2391.54 Kg. For Sl-1, 2403.24 Kg. For Sl-2, 2375.79 Kg. For Sl-3, 2428.44 Kg. For Sl-4 & 2418.15 Kg. For Sl-5), S.s. Trough Floor-(approx. 930 Kg. For Each Coaches) Etc. Which Are Unserviceable And Non-returnable. Location- Lying At Trg. Yard/hlr. After Sale, Coaches Will Be Handed Over To Purchaser For Dismantling And Cutting At Trg.yard/hlr. Cutting And Dismantling Of Coaches Is To Be Made At Trg. Yard/ Hlr By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. Returnable Items Of Sold Coaches Are To Be Returned To The Custodian Before Delivery.

Details: Description Part A General Requirements B.5 Project Billboard 1.00 Each Part B Earthworks 803(1)a Structure Excavation (common Soil) 17.36 Cu.m 804(1)a Embankment From Structure Excavation 14.07 Cu.m 804(1)b Embankment From Borrow By Equipment 85.40 Cu.m 804(4) Gravel Bedding 6.09 Cu.m Part C Plain And Reinforced Concrete Work 900(1) Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder 4.52 Cu.m 900(1)c2 Structural Concrete Footing And Slab On Fill(class A, 28 Days) 17.68 Cu.m 902(1)a Reinforcing Steel (deformed) Grade 40/grade 60 1,286.00 Kgs 903(2) Formworks And Falseworks (for One-storey Building 21.69 Sq.m Part D Finishings And Other Civil Works 1003(1)a 4.5mm Marine Plywood On Wood Framing Ceiling 9.00 Sq.m 1003(2)a Thermoplastic Wall Clading On Metal Framing 21.44 Sq.m 1010(2)a Solid Panel Door (hardwood) 8.82 Sq.m 1018 Unglazed Tiles 4.50 Sq.m 1018(1) Glazed Tiles And Trims 15.75 Sq.m 1027(1) Cement Plaster Finish 591.14 Sq.m 1032(1)a Painting Works (masonry Painting) 246.08 Sq.m 1032(1)b Painting Works (wood Painting) 9.00 Sq.m 1043(1) Pvc Doors And Frames 2.94 Sq.m 1046 100mm Chb Non Load Bearing/load Bearing (including Reinforcing Steel) 343.26 Sq.m Part E Electrical Works 1100(10) Conduits, Boxes, And Fittings (conduit Works/ Coduit Rough-in) 1.00 L.s 1101(33) Wires And Wiring Devices 1.00 L.s 1102(1) Panelboard With Main & Branch Breakers 1.00 L.s 1103(1) Lighting Fixtures And Lamps 1.00 L.s Part F Plumbing Works 1001(8) Sewer Line Works 1.00 L.s 1002(4) Plumbing Fixtures 1.00 L.s 1002(24) Cold Water Lines 1.00 L.s

Description: Contract notice - general guideline, standard regulation, open procedure (deliveries) copy paper framework agreement for the procurement of copy paper as an EBP catalogue offer for the offices of the state of Hesse copy paper as a catalogue offer, ... multiple copy paper framework agreement for the procurement of copy paper as an EBP catalogue offer for the offices of the state of Hesse copy paper as a catalogue offer, copy paper is to be offered, some of which is generated as an electronic order in the catalog system of the state of Hesse and must subsequently be delivered to the offices of the state of Hesse. Approx. 4,300 tonnes (equivalent to approx. 854,400,000 sheets) of wood-free copy paper is to be delivered. The copy paper is to be delivered in the variants RC paper (small quantities also colored), totally chlorine-free paper (TCF) and elemental chlorine-free paper (ECF, colored) in the formats DIN A 4 and DIN A 3 [based on the total quantity, approx. 2/4 of this is wood-free totally chlorine-free (TCF) or elemental chlorine-free (ECF) copy paper] to various departments in the state of Hesse within a maximum of 5 working days from a minimum order quantity of 10,000 sheets of DIN A 4 or 10,000 sheets of DIN A 3. The client also has a unilateral right to extend the service up to 20.00% of the total net offer amount from this tender procedure as additional requirements (quantitative service extension). The maximum quantity that can be called up via this framework agreement is set at 1,025,280,000 sheets. This quantity is calculated from the estimated purchase quantities plus 20% as an additional quantity required. The recycled paper is certified with the Blue Angel or equivalent certification, and the TCF or ECF copy paper with FSC and/or PEFC or equivalent certification. It should be noted that there are approximately 700 different purchasers (all departments and institutions in the state of Hesse, as well as Hessian schools within the scope of free learning materials) and approximately 4,400 delivery points (delivery addresses). The FITKO public law institution jointly sponsored by all states and the federal government, based in Frankfurt am Main (Hesse), is also authorized to place orders. The framework agreement is entered into an electronic catalog system (eProcurement) set up by the state of Hesse and is accessible to all departments in the state of Hesse (except schools). Orders can therefore be placed by all state authorities. The contractor is obliged to cooperate in the provision of the catalogue and the associated order and payment processing (relevant information on this can be found in section 7 of the service description). The Hessian schools will request some of their requirements by email, fax or telephone. An invoice will be sent to the school concerned. The goods can be delivered at any time (room delivery) to the respective ordering department or to the specified delivery address (decentralized delivery).