Waterproofing Tenders

Details: Description Invitation To Bid For Early Procurement Activity (epa) For The Supply And Delivery Of Information And Communications Technology (ict) Supplies And Equipment Of Mines And Geosciences Bureau Regional Office No. X For Fy 2025 1. The Mines And Geosciences Bureau Regional Office No. X(mgb-x), Through The National Expenditure Program Intends To Apply The Sum Of One Million Two Hundred Ten Thousand Pesos Only (php 1, 210, 000.00) Being The Abc To Payments Under The Contract For Early Procurement Activity (epa) For The Supply And Delivery Of Information And Communications Technology (ict) Supplies And Equipment Of Mines And Geosciences Bureau Regional Office No. X For Fy 2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Award Of The Contract Is Subject To The Effectivity Of The General Appropriations Act (gaa) For Fy 2025. The Mgb-x Is Conducting This Procurement Through The Early Procurement Activity (epa) For Fy 2025 To Ensure The Timely Delivery Of Goods Consistent With The Gppb Resolution No. 14-2019 Dated July 17, 2019. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract For Goods To Be Delivered In The Following Fiscal Year (i.e. Fy 2025), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Mgb-x Will Evaluate The Bid Proposal And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be The Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget. C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. 2. The Mgb-x Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Shall Be Within Sixty (60) Calendar Days Upon Receipt Of An Approved Purchase Order In Accordance With The Delivery Schedule Under Section Vi Schedule Of Requirements. Bidders Should Have Completed, Within The Past Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). For The Technical Specifications, See Section Vii One (1) Lot Of Supply And Delivery Of Information And Communications Technology (ict) Supplies And Equipment For Mines And Geosciences Bureau Regional Office No. X For Fy 2025 ₱ 1, 210, 000.00 Computer Peripherals Keyboard - High-end, Tuf K7 Gaming Optic Mech Kb Line Unit 5 Mouse – Wireless, Mw203 Multi-device Wireless Silent Mouse Unit 10 Mouse – Wired, Rog Strix P506 Impact Ii Optical Gaming Mouse Unit 6 Speaker For Desktop, Z213 2.1 Speaker Unit 5 Web Camera, Usb Broadcasting Web Cam, 1080p 30fps Unit 15 Headset – Wired, Tuf H3 Wired Stereo Gaming Headset Unit 15 Usb Hub, Usb 3.0 4-port Portable Hub (uh400) Unit 5 Monitor - 27 Inch, M27f 2h0n1aa 27" Diagonal Fhd Monitor Unit 4 Portable Storage Devices Network Attached Storage, Diskstation Ds220j Unit 1 External Hdd, External Hard Drive Usb 3.2 Gen 1 5tb Unit 10 External Hdd, External Hard Drive 3.0 2tb Unit 10 Flash Drive - 64gb Dt Micro Duo 3.0 Otg Piece 20 Flash Drive - 16gb Dt Micro Duo 3.0 Otg Piece 25 1tb Internal Solid-state Drive For Pc Unit 5 Micro Sd Card, 128gb Piece 5 Other Ict Supplies Drone Battery For Dji Mavic 3 Pro Unit 6 Mini Display Port To Vga Adapter, Piece 2 Hdmi To Vga Converter With Audio - 25cm Mini Display Port To Hdmi Adapter, Mini Dp Piece 4 Male To Vga Female + Hdmi Female Converter - 15cm Hdmi To Dvi Cable - 3 Meters Piece 5 Hdmi Cable - 5 Meters Piece 7 Dvi To Vga - 3 Meters Piece 5 Laptop Docking Station, Ssk Sc220 8k Unit 1 Hdmi Hub Dual Hdmi Hub 10gbps Usb3.2 Gen Hdmi Splitter, 4 Port Unit 1 Hdd/ssd Docking Station, Usb 3.0 To Sata Unit 1 Hdd Docking Station With Offline Copy Poe Injector, Poe150s Unit 4 Pocket Wi-fi, Dl-7202 4g Lte Advanced Mobile Wi-fi Unit 4 Wireless Presenter Unit 5 Crimping Tool, Rj45 Crimp Tool Multifunctional For Pass Through Unit 2 Network Tracer Tool, Nf-8209s Lan Network Cable Tester Wire Unit 2 Usb C To Hdmi Adapter Piece 3 Hdmi Switcher, 8-port Bi-directional Connection Unit 2 Printer Consumables Brother Ink Bottle, Btd60 Black Bottle 40 Brother Ink Bottle, Bt5000 Cyan Bottle 40 Brother Ink Bottle, Bt5000 Magenta Bottle 40 Brother Ink Bottle, Bt5000 Yellow Bottle 42 Epson T6731 Ink (black) Bottle 4 Epson T6732 Ink (cyan) Bottle 4 Epson T6733 Ink (magenta) Bottle 4 Epson T6734 Ink (yellow) Bottle 4 Epson T6735 Ink (light Cyan) Bottle 4 Epson T6736 Ink (light Magenta) Bottle 4 Hp 62 Black Ink Cartridge Cartridge 20 Hp 62 Tri Color Ink Cartridge Cartridge 20 Epson 003 Ink, Black Bottle 20 Epson 003 Ink, Cyan Bottle 20 Epson 003 Ink, Magenta Bottle 20 Epson 003 Ink, Yellow Bottle 20 Epson 008 Ink, Black Bottle 5 Epson 008 Ink, Magenta Bottle 5 Epson 008 Ink, Yellow Bottle 5 Epson 008 Ink, Cyan Bottle 5 Epson T6641 Ink (black) Bottle 10 Epson T6642 Ink (cyan) Bottle 5 Epson T6643 Ink (magenta) Bottle 5 Epson T6644 Ink (yellow) Bottle 7 Hp 680 Black Ink Cartridge Cartridge 20 Hp 680 Tri Color Ink Cartridge Cartridge 20 Hp 727 Photo Black Ink Cartridge (for Hp T1500 Plotter) Cartridge 1 Hp 727 Gray Ink Cartridge (for Hp T1500 Plotter) Cartridge 1 Hp 727 Matte Black Ink Cartridge (for Hp T1500 Plotter) Cartridge 1 Hp 727 Cyan Ink Cartridge (for Hp T1500 Plotter) Cartridge 1 Hp 727 Magenta Ink Cartridge (for Hp T1500 Plotter) Cartridge 1 Hp 727 Yellow Ink Cartridge (for Hp T1500 Plotter) Cartridge 1 Brother Toner Cartridge, Tn-3478 Toner 2 Semi-expandable Machinery And Equipment - Ict Equipment External Usb Sound Card Audio Adapter Unit 2 Audio Portable System, Ram12bt 12" Unit 1 Rechargeable Powered 600w Pa Speaker Ups - 1600va, 230v, Avr, 4 Universal Outlets Unit 2 Ups - 2000va, 220vac, 1200 Wattage Unit 5 Camera - Digital, Waterproof, Crushproof, Shockproof, Unit 3 Freezeproof & Dustproof, 12mp Bsi Cmos Sensor, True Pic Viii Image Processor, 4k Video Recording And Full Hd At 30 Fps Semi-expendable Machinery And Equipment Expenses-printing Equipment Printer - Multi Function, Print, Scan, Copy, Fax With Adf, Unit 3 Print Speeds Up To 17ipm For Black And 9.5ipm For Colour, Auto-duplex Printing Printer A3, Yield Of Up To 1,500 4r Photos, Unit 1 Print Speed Up To 15ppm Printer - A4, Print, Scan, Copy, Compact Integrated Unit 6 Tank Design, Spill-free, Error-free Refilling Other Requirements: • Bidder Must Be An Authorized Distributor/reseller For At Least Three (3) Years; • Certificate From The Manufacturer Duly Notarized Is A Must; • Certificate Of Manufacturer’s Service Support Center Within Northern Mindanao, Philippines Starting That The Bidder Is Authorized To Repair, Calibrate Or Fix The Product; And • Business Permit Of Service Center Within Northern Mindanao As Proof Of Its Establishment. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Mines And Geosciences Bureau Regional Office No. X And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024, To December 2, 2024, From The Given Address And Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱ 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, Or Through Electronic Means. 6. The Mines And Geosciences Bureau Regional Office No. X Will Hold A Pre-bid Conference On November 20, 2024, 3:00 Pm At Mgb-x Conference Room, Denr Compound, Puntod, Cagayan De Oro City Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 2, 2024, 2:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 2, 2024, 2:30 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Activity Date Time Venue Availability Of Bidding Documents November 11 – December 2, 2024 8:00 Am To 5:00 Pm, Monday To Friday (november 11 – December 1, 2024) 8:00 Am To 2:00 Pm (december 2, 2024) Fad, Denr Compound, Puntod, Cagayan De Oro City Pre-bid Conference November 20, 2024 3:00 Pm Mgb-x Conference Room Deadline For Submission Of Bid Documents December 2, 2024 2:00 Pm Mgb-x Conference Room Opening Of Bids December 2, 2024 2:30 Pm Mgb-x Conference Room 10. This Procurement Project Is Undertaken Through Early Procurement Activities (epa), Hence, The Award Of Contract To The Lowest/single Calculated And Responsive Bidder May Only Be Made By The Procuring Entity Upon Approval Or Enactment Of The Fy 2025 General Appropriations Act (gaa) Pursuant To Section 7.6 Of The 2016 Revised Implementing Rules And Regulations Of Republic Act (ra) 9184 And The Provisions Under Gppb Circular 06-2019 Dated July 17, 2019. 11. The Mines And Geosciences Bureau Regional Office No. X Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Lariza Amor R. Lucero Bac Secretariat Mines And Geosciences Bureau Regional Office No. X Denr Compound, Puntod, Cagayan De Oro City Region10@mgb.gov.ph (088) 880-2110 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph/ Https://region10.mgb.gov.ph/ November 11, 2024 Date Of Issue Virginia R. Verdejo Bac Chairperson

Details: Description Items For Bidding - Medical Surgical Supplies For Cy 2025 (epa) Description Quantity Unit Unit Cost Total Cost 1 Glutaraldehyde, Solvents, Tensides, Corrosion Inhibitor With 28 Days Lifespan Once Open 25 Gal 2,000.00 50,000.00 2 Propanol, Benzalkonium Chloride 60 Bot 2,600.00 156,000.00 3 Way Stopcock 1300 Pcs 15.00 19,500.00 3 Way Stopcock With Extension Tube 10cm-20 Cm, Sterile 500 Pcs 380.00 190,000.00 Abdominal Binder, Size L & Xl 300 Pcs 100.00 30,000.00 Absorbable Hemostat, 10cm² Contain 100mg Collagen Of Bovine Origin, 3 Cm X5 Cm 25 Pcs 560.00 14,000.00 Air Way Size #1 50 Pcs 40.00 2,000.00 Air Way Size #2 100 Pcs 40.00 4,000.00 Air Way Size #3 50 Pcs 40.00 2,000.00 Air Way Size 0 (60mm) 30 Pcs 40.00 1,200.00 Air Way Size 00 (50mm) 30 Pcs 40.00 1,200.00 Alcohol Swab 10000 Pcs 2.50 25,000.00 Alcohol, Isopropyl, 70%, 500ml 1000 Bot 95.00 95,000.00 Alcohol, Isoprophyl, 70%,3.75l 500 Gal 800.00 400,000.00 Arm Sling, Adult, Made In 100% Comfortable Cotton *double Ply* Detachable Buckle* Adjustable Strap 150 Pcs 250.00 37,500.00 Arm Sling, Upper Extension Sling, Pedia, Medium 100 Pcs 250.00 25,000.00 Autoclave Indicator, Size: 1" X 50 Meters 50 Roll 320.00 16,000.00 Autoclave Indicator, Size: 3/4" (18mm) X 10 Yards 25 Roll 800.00 20,000.00 Bag Valve Mask, Disposable Pedia, Self-inflating Bag, One-way Valve, Mask, And With Oxygen Reservoir. 50 Pcs 1,000.00 50,000.00 Bag Valve Mask, Disposable, Adult, Self-inflating Bag, One-way Valve, Mask, And With Oxygen Reservoir. 200 Pcs 1,000.00 200,000.00 Bag Valve Mask, Disposable, Neonate 5 Pcs 1,000.00 5,000.00 Bandage , Elastic 2"x5" 10 Pcs 25.00 250.00 Bandage , Elastic 3"x5" 200 Pcs 25.00 5,000.00 Bandage , Elastic 4"x5" 750 Pcs 25.00 18,750.00 Bandage , Elastic 6" X 5" 500 Pcs 35.00 17,500.00 Bedpan, Plastic, Adult 10 Pcs 100.00 1,000.00 Blood Lancet, Ultrafine, G.30, 100's 200 Box 280.00 56,000.00 Blood Transfusion Set 1000 Pcs 58.00 58,000.00 Bp Inflation Bag With Cuff, Children - Bp Cuff Size: 22-36 Cm/ 22-48cm 15 Set 400.00 6,000.00 Bp Inflation Bag With Cuff, Adult Standard 50 Set 400.00 20,000.00 Bp Rubber Pump 10 Pcs 240.00 2,400.00 Breathing Circuit, Anesthesia, Adult, 72'' Expanding Tubing, 3l Latex Bag, 1 Filter And Gas Sampling Elbow 100 Set 980.00 98,000.00 Breathing Circuit, Anesthesia, Pedia, 62'' Expanding Tubing, 1l Latex Bag, 1 Filter And Gas Sampling Elbow 50 Set 980.00 49,000.00 Breathing Circuit, Disposable, Neonate With Connector And Water Traps 10 Set 950.00 9,500.00 Brush, Surgical, Disposable 1000 Pcs 65.00 65,000.00 Cadaver Bag, Adult, With Zipper, 230cmx90cm 100 Pcs 500.00 50,000.00 Cautery Ground Pad, Adult 50 Pcs 300.00 15,000.00 Cautery Ground Pad, Neonate 10 Pcs 200.00 2,000.00 Cautery Ground Pad, Pedia 25 Pcs 250.00 6,250.00 Cautery Pen, Compatible With Valleylab 500 Pcs 400.00 200,000.00 Cervical Collar , Hard Case, Pedia, Adjustible Size 5 Pcs 300.00 1,500.00 Cervical Collar, Hard Case , Adult, Adjustible Size 20 Pcs 250.00 5,000.00 Chest Catheter Fr. 20,radiopaque 5 Pcs 750.00 3,750.00 Chest Catheter Fr. 22,radiopaque 5 Pcs 750.00 3,750.00 Chest Catheter Fr. 28,radiopaque 5 Pcs 750.00 3,750.00 Chest Catheter Fr. 32,radiopaque 10 Pcs 750.00 7,500.00 Chest Catheter Fr. 36,radiopaque 50 Pcs 750.00 37,500.00 Chest Tubing With 1.5l Bottle, Disposable, Set (compact Chest Drainage System) 150 Set 900.00 135,000.00 Closed Suction Tube F 14 (c0vid Use) 50 Pcs 1,600.00 80,000.00 Closed Suction Tube F 16 (covid Use) 5 Pcs 1,600.00 8,000.00 Colostomy Bag 40mm 50 Pcs 560.00 28,000.00 Colostomy Bag 60mm 100 Pcs 560.00 56,000.00 Cord Clamp, Disposable, Umbilical 30 Box 380.00 11,400.00 Cotton Applicator 6", Individually Packed , Sterile, 100's/box 100 Pack 185.00 18,500.00 Cotton Balls , 300 Pcs. / Pack 1000 Pack 95.00 95,000.00 Delivery Room Gloves, Non-powdered, Size 7.5, Elbow Length 300 Pairs 410.00 123,000.00 Delivery Room Gloves, Sterile, Non-powdered, Size 7, Elbow Length 300 Pairs 370.00 111,000.00 Disinfectant Spray, Antibacterial, 12 Oz. (340g) Ethanol 60% 300 Can 565.00 169,500.00 Disposable Laparotomy Pack For C/s, Sterile 50 Pack 2,000.00 100,000.00 Dressing Pack, Sterile With Expiry Date 2000 Pack 105.00 210,000.00 Ecg Electrodes , Adult 5000 Pcs 13.00 65,000.00 Ecg Electrodes , Neonate 200 Pcs 11.00 2,200.00 Ecg Electrodes , Pediatric 2000 Pcs 11.00 22,000.00 Ecg Paper 80 Mmx 20 Mm 300 Roll 245.00 73,500.00 Endotracheal Tube Holder , Adult 150 Pcs 250.00 37,500.00 Endotracheal Tube With Cuff Size 5.5 20 Pcs 50.00 1,000.00 Endotracheal Tube With Cuff Size 6.0 20 Pcs 50.00 1,000.00 Endotracheal Tube With Cuff Size 6.5 35 Pcs 55.00 1,925.00 Endotracheal Tube With Cuff Size 7.0 50 Pcs 55.00 2,750.00 Endotracheal Tube With Cuff Size 7.5 150 Pcs 55.00 8,250.00 Endotracheal Tube With Cuff Size 8.0 150 Pcs 55.00 8,250.00 Endotracheal Tube With Soft Cuff Size 5.0 20 Pcs 50.00 1,000.00 Endotracheal Tube Without Soft Cuff Size 2.0 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 2.5 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 3.0 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 3.5 50 Pcs 55.00 2,750.00 Endotracheal Tube Without Soft Cuff Size 4.0 20 Pcs 50.00 1,000.00 Endotracheal Tube Without Soft Cuff Size 4.5 20 Pcs 50.00 1,000.00 Epidural Set, Touhy Bevel, Diameter 1.30 X 80 Mm, (18 G), Ø 0.85 X Ø 0.45 X 1000 Mm (20g), With Filter 50 Set 2,000.00 100,000.00 Extension Tubing , With 3 Needle Free Connections 500 Pcs 380.00 190,000.00 Extension Tubing , With Needle Free Connections 500 Pcs 104.00 52,000.00 Face Mask, With Earloop, 50's/box 1000 Box 100.00 100,000.00 Fiber Optic Bulb For Laryngoscope 10 Pcs 3,200.00 32,000.00 Foley Bag Catheter, 2 Way, Fr.10 20 Pcs 40.00 800.00 Foley Bag Catheter, 2 Way, Fr.12 50 Pcs 40.00 2,000.00 Foley Bag Catheter, 2 Way, Fr.14 500 Pad 40.00 20,000.00 Foley Bag Catheter, 2 Way, Fr.16 1030 Pcs 50.00 51,500.00 Foley Bag Catheter, 2 Way, Fr.18 250 Pcs 40.00 10,000.00 Foley Bag Catheter, 2 Way, Fr.22 100 Pcs 40.00 4,000.00 Foley Bag Catheter, 2 Way, Fr.24 100 Pcs 40.00 4,000.00 Foley Bag Catheter, 2 Way, Fr.5 25 Pcs 40.00 1,000.00 Foley Bag Catheter, 2 Way, Fr.8 25 Pcs 40.00 1,000.00 Foley Bag Catheter, 3 Way, Fr.16 50 100.00 5,000.00 Foley Bag Catheter, 3 Way, Fr.22 50 Pcs 100.00 5,000.00 Foley Bag Catheter, 3 Way, Fr.24 100 Pcs 100.00 10,000.00 Foley Bag Catheter, 3-way, Fr. 18 50 Bot 100.00 5,000.00 Gauze, Absorbent, 36x100yrds 24 X 28mesh 350 Roll 1,300.00 455,000.00 Gel Ultrasound 10 Gal 800.00 8,000.00 Gloves, Orthopedic, Sterile, Size 7 , Powder Free 50 Pairs 50.00 2,500.00 Gloves, Non-sterile, Nitrile, Large 20000 Pairs 9.00 180,000.00 Gloves, Non-sterile, Nitrile, Medium 30500 Pairs 9.00 274,500.00 Gloves, Non-sterile, Nitrile, Small 30000 Pairs 9.00 270,000.00 Gloves, Orthopedic, Sterile, Size 7 1/2, Powder Free 200 Pairs 50.00 10,000.00 Gloves, Sterile #6 , Powder Free Latex 5000 Pairs 22.00 110,000.00 Gloves, Sterile #6.5,powder Free, Latex 14500 Pairs 22.00 319,000.00 Gloves, Sterile #7 1/2, Powder Free , Latex 13500 Pairs 22.00 297,000.00 Gloves, Sterile #7, Powder Free, Latex 10000 Pairs 22.00 220,000.00 Gloves, Sterile #8, Powder Free, Latex 500 Pairs 22.00 11,000.00 Gluco Strip, Plus Test Strips With Free Lancet, Pricking Pen And Glucometer In Every 50 Packs, 50 Strip/pack 1000 Pack 1,100.00 1,100,000.00 Heat- Sealing Sterilization Pouch W/ Indicator 100mmx100m 10 Roll 1,200.00 12,000.00 Heat- Sealing Sterilization Pouch W/ Indicator 150mmx100m 5 Roll 1,700.00 8,500.00 Heat- Sealing Sterilization Pouch W/ Indicator 8"x100's, Sps 3 Roll 2,500.00 7,500.00 Hot Water Bag-rubber Medium 100 Pcs 100.00 10,000.00 Hydrogen Peroxide, 10 Vol, 120 Cc/bot. 500 Bot 50.00 25,000.00 I.v. Macroset With Airvent, 3-way Port, Needleless 5000 Pcs 100.00 500,000.00 I.v. Microset With Airvent, 3-way Port, Needleless 1500 Pcs 115.00 172,500.00 Ice Bag 6" 50 Pcs 80.00 4,000.00 Infusomat Space Line (macroset), Type Iv-injection-neutrapur, Luer Lock, Good Quality 250 Pcs 795.00 198,750.00 Injection Pad, 36mm Defries B100 500 Pcs 30.00 15,000.00 "intravenous Cannula G18, With Safetouch Wing Cath Without Injection Port 18gx1-1/4"" (32mm) " 5000 Pcs 100.00 500,000.00 "intravenous Cannula G20, With Safetouch Wing Cath Without Injection Port 20gx1-1/4"" (32mm) " 10000 Pcs 100.00 1,000,000.00 "intravenous Cannula G22, With Safetouch Wing Cath Without Injection Port 22gx1"" (25mm) " 5000 Pcs 100.00 500,000.00 "intravenous Cannula G24, With Safetouch Wing Cath Without Injection Port 24gx3/4"" (19mm) " 10000 Pcs 100.00 1,000,000.00 "intravenous Cannula G26, With Safetouch Wing Cath Without Injection Port 26gx3/4"" (19mm) " 3000 Pcs 100.00 300,000.00 Intubating Stylet Fr 10, 3.3mm Guide Wire) 100 Pcs 150.00 15,000.00 Intubating Stylet Fr 12, ( Guide Wire) 50 Pcs 150.00 7,500.00 Intubating Stylet Fr 14 ,4.6mm (guide Wire) 200 Pcs 150.00 30,000.00 Intubating Stylet Fr 6, 2.0mm (guide Wire) 50 Pcs 188.00 9,400.00 Iv Splint -neonate 350 Pcs 50.00 17,500.00 Iv Splint -pedia 500 Pcs 50.00 25,000.00 Iv Splint-adult 500 Pcs 70.00 35,000.00 Iv Start Pack 1500 Pcs 90.00 135,000.00 Iv Transparent Dressing, With Delivery Frame System, Breathable, Hypoallergenic, Waterproof, Impermeable To Bacteria And Viruses, Best For Neonates, 6x7cm, 100 Pcs Per Box 300 Pcs 40.00 12,000.00 Iv Transparent Dressing, With Delivery Frame System, Breathable, Hypoallergenic, Waterproof, Impermeable To Bacteria And Viruses, With Sterile Soft Cloth Tape Strips, Latex Free Best For Pediatric, 5cm X 5.7cm, 100 Pcs Per Box 150 Pcs 55.00 8,250.00 Jackson Pratt (suction Reservoir Cup), 100ml 100 Pcs 1,000.00 100,000.00 Kn95, Medical Grade, 5 Layers 1500 Pcs 8.00 12,000.00 Lubricating Gel, 150gm 80 Tube 150.00 12,000.00 Mesh, Premiline 5 Pcs 2,470.00 12,350.00 Mini Spike, Dispensing Pin 50 Pcs 150.00 7,500.00 Mortar And Pestle, Ceramic 5 Pcs 300.00 1,500.00 Mucus Extractor 150 Pcs 100.00 15,000.00 N95 Mask 10000 Pcs 90.00 900,000.00 Nebulizer Tubing Kit 3000 Pcs 50.00 150,000.00 Needle, Disposable Im G.18 10000 Pcs 2.50 25,000.00 Needle, Disposable Im G.23 500 Pcs 2.50 1,250.00 Needle, Disposable Im G.26 1000 Pcs 2.50 2,500.00 Needle, Pen For Insulin Pen 250 Pcs 18.00 4,500.00 Needleless Heplock, Polyprolene Body, Safetouch Plug 5000 Pcs 92.00 460,000.00 Oxygen Cannula Pedia 500 Pcs 30.00 15,000.00 Oxygen Cannula, Adult 1500 Pcs 30.00 45,000.00 Oxygen Cannula, Neonate 300 Pcs 30.00 9,000.00 Oxygen Mask, Adult W/ Tubing Disposable 500 Pcs 45.00 22,500.00 Oxygen Mask, Adult, Non-rebreather 300 Pcs 85.00 25,500.00 Paper Sterilizer 90x90 Cm 2000 Roll 25.00 50,000.00 Patient's Kit 1000 Set 350.00 350,000.00 Penrose Drain, Cigarette ,sterile, Size 1/2" 50 Pcs 30.00 1,500.00 Penrose Drain, Cigarette ,sterile, Size 1/4" 30 30.00 900.00 Plaster Of Paris ,4 Inches 50 Pcs 90.00 4,500.00 Plaster Of Paris ,6 Inches 50 Pcs 90.00 4,500.00 Plaster, Adhesive, Universal Surgical Tape, Assorted Size 500 Tube 3,500.00 1,750,000.00 Plaster, Paper Tape, Hypoallergenic, Non-latex, Non-woven With Strong Adhesion, 1/2 Inch Width And 10 Yards In Length, 24pcs Per Box 2000 Roll 55.00 110,000.00 Povidone Iodine, Cleanser 7.5%, 3.785 Ltrs 100 Gal 1,350.00 135,000.00 Povidone, Iodine Antiseptic Solution 10%. 3.785 Ltrs/gal 100 Gal 1,350.00 135,000.00 Razor, Disposable 1500 Pcs 20.00 30,000.00 Reinforce Skin Closures, 1/4" X 4', 6mmx100mm, Sterile 50 Pcs 130.00 6,500.00 Shoe Cover 1000 Pcs 2.50 2,500.00 Sodasorb 3 Pail 15,000.00 45,000.00 Solution Administration Set, Soluset, 150cc, Sterile 250 Pcs 150.00 37,500.00 Spinal Needle # 25 500 Pcs 93.00 46,500.00 Spinal Needle # 26 50 Pcs 93.00 4,650.00 Suction Catheter Fr.10 100 Pcs 18.00 1,800.00 Suction Catheter Fr.12 100 Pcs 18.00 1,800.00 Suction Catheter Fr.14 1000 Pcs 18.00 18,000.00 Suction Catheter Fr.16 1000 Pcs 18.00 18,000.00 Suction Catheter Fr.18 1000 Pcs 18.00 18,000.00 Suction Catheter Fr.5 300 Pcs 18.00 5,400.00 Suction Catheter Fr.8 3000 Pcs 18.00 54,000.00 Suction Set Pool Drain 1000 Pcs 275.00 275,000.00 Surgical Blade #10 1000 Pcs 5.00 5,000.00 Surgical Blade #11 500 Pcs 5.00 2,500.00 Surgical Blade #15 100 Pcs 5.00 500.00 Surgical Blade #20 500 Pcs 5.00 2,500.00 Surgical Cap, 100 Pcs/pack (bouffant) 10000 Pcs 1.20 12,000.00 Surgical Stapler/ Skin Stapler (for Every 10 Staplers Plus 1 Remover) 20 Pcs 500.00 10,000.00 Suture, Chromic 2- 0, With Round Needle 480 Pcs 120.00 57,600.00 Suture, Chromic Catgut 0, With Round Needle 150 Pcs 120.00 18,000.00 Suture, Chromic 3-0 , 75 Cm, Needle Size 26mm, With Round Bodied Needle 250 Pcs 110.00 27,500.00 Suture, Chromic 4-0 With Round Bodied 50 Pcs 110.00 5,500.00 Suture, Polyamide 3-0 , 45cm, Needle Size 26mm, With Cutting Needle 200 Pcs 200.00 40,000.00 Suture, Polyamide, 4-0 With Cutting Needle 100 Pcs 188.00 18,800.00 Suture, Polygactin 2-0, Round, 150 Pcs 340.00 51,000.00 Suture, Polygactin 6-0, 45cm, Needle Size11mm, With Reverse Cutting Needle 30 Pcs 518.00 15,540.00 Suture, Polygactin 6-0, 70cm, Needle Size 17mm, Round Needle 62 Pcs 518.00 32,116.00 Suture, Polygactin 910 Plus 0, 36", Needle Size 36mm, Round, 1000 Pcs 470.00 470,000.00 Suture, Polygactin 910 Plus 4-0,70cm, Needle Size 22mm, Atr Round Needle 200 Pcs 370.00 74,000.00 Suture, Polygactin 910, Plus 3.0 Atr, Round Needle (intestinal) 27", Needle Size 24mm 200 Pcs 410.00 82,000.00 Suture, Polyprolene 2-0,blue Monofilament, Round 32 300.00 9,600.00 Suture, Polyprolene 0,blue Monofilament, Round 12 370.00 4,440.00 Suture, Polyprolene 3-0, 75 Cm, Needle Size 17mm, Blue Monofilament, Round 270 Pcs 300.00 81,000.00 Suture, Polyprolene 3-0, Blue Monofilament, Cutting 30 Pcs 560.00 16,800.00 Suture, Polyprolene 4-0, 75 Cm, Round Needle, Size 17 Mm, Blue Monofilament 32 Pcs 1,150.00 36,800.00 Suture, Polyprolene 5-0, Cutting Needle 12 Pcs 560.00 6,720.00 Suture, Polyprolene 6-0, 60 Cm, Cutting Needle, Size 9.3 Mm, Blue Monofilament 12 Pcs 560.00 6,720.00 Suture, Polyprolene 6-0, 60 Cm, Round Needle, Size 9.3 Mm, Blue Monofilament 12 Pcs 560.00 6,720.00 Suture, Silk 0, Braided, 15x60m, Black, W/o Needle 60 Pcs 175.00 10,500.00 Suture, Silk 1-0, Round, 75cm, Needle Size 40mm, Round Bodied Needle 12 Set 125.00 1,500.00 Suture, Silk 2-0, Braided , 15x60cm, W/o Needle 200 Pcs 175.00 35,000.00 Suture, Silk 2-0, Round, 75cm, Needle Size 40mm, Round Bodied Needle 32 Pcs 125.00 4,000.00 Suture, Silk 3-0 , 75cm, Needle Size 26mm, W/ Round Needle 100 Pcs 110.00 11,000.00 Suture, Silk 4-0, 75cm, Needle Size 22mm, Cutting Needle 60 Pcs 110.00 6,600.00 Suture, Silk 4-0, 75cm, Needle Size 22mm, Round Needle 100 Pcs 110.00 11,000.00 Suture, Silk 4-0, W/ Out Needle 60 Pcs 115.00 6,900.00 Syringe, Asepto,60 Ml. 300 Pcs 45.00 13,500.00 Syringe, Disposable 20cc 5000 Pcs 20.00 100,000.00 Syringe, Disposable 50cc 3000 Pcs 20.00 60,000.00 Syringe, Disposable, 10cc 50000 Pcs 12.00 600,000.00 Syringe, Disposable, 1cc 3000 Pcs 10.00 30,000.00 Syringe, Disposable, 3cc 50000 Pcs 8.00 400,000.00 Syringe, Disposable, 5cc 3000 Pcs 9.00 27,000.00 Syringe, Insulin 20000 Pcs 10.00 200,000.00 Thermometer 3000 100.00 300,000.00 Tongue Depressor, Wooden, Individually Packed, Sterile 5000 Pcs 1.00 5,000.00 Tracheostomy Holder 50 Pcs 2,000.00 100,000.00 Tracheostomy Tube, With Inner Cannula, Size 6 5 Pcs 3,500.00 17,500.00 Tracheostomy Tube, With Inner Cannula, Size 7 5 Pcs 3,500.00 17,500.00 Tracheostomy Tube, With Inner Cannula, Size 7.5 5 Pcs 3,500.00 17,500.00 Tracheostomy Tube, With Inner Cannula, Size 8 5 Pcs 3,500.00 17,500.00 T-tube, Drainage, Silicone Fr. 14 20 Pcs 300.00 6,000.00 T-tube, Drainage, Silicone Fr. 16 50 Pcs 300.00 15,000.00 T-tube, Drainage, Silicone Fr. 18 50 Pcs 300.00 15,000.00 Tube, Ngt Fr. 10, Nasogastric 10 Pcs 15.00 150.00 Tube, Ngt Fr. 12, Nasogastric 30 Pcs 15.00 450.00 Tube, Ngt Fr. 14, Nasogastric 50 Pcs 15.00 750.00 Tube, Ngt Fr. 16, Nasogastric 300 Pcs 15.00 4,500.00 Tube, Ngt Fr. 18, Nasogastric 300 Pcs 15.00 4,500.00 Tube, Ngt Fr. 5, Nasogastric 300 Pcs 15.00 4,500.00 Tube, Ngt Fr. 8, Nasogastric 500 Pcs 15.00 7,500.00 Underpads (adult) 60x90 Cm, 80g 10000 Pcs 30.00 300,000.00 Urinal, Male, Plastic 200 Pcs 90.00 18,000.00 Urine Bag, 1000-2000 Ml Capacity 500 Pcs 35.00 17,500.00 Urine Collector 500 Pcs 5.00 2,500.00 Volumetric Set Space Line (compatible For Bbraun Machine) 100 Pcs 865.00 86,500.00 Wadding Sheet Size 4 X 5 150 Roll 40.00 6,000.00 Wadding Sheet Size 6 X 5 150 Roll 40.00 6,000.00 Wristlet Newborn Pink 1000 Pcs 3.00 3,000.00 Wristlet Newborn Blue 500 Pcs 3.00 1,500.00 Wristlet, Adult, Blue 2500 Pcs 4.00 10,000.00 Wristlet, Adult, Pink 1500 Pcs 4.00 6,000.00 Wristlet, Pedia, Blue 200 Pcs 3.00 600.00 Wristlet, Pedia, Pink 300 Pcs 3.00 900.00 Yankauer Suction Set, Connecting With Handle 25 Pcs 175.00 4,375.00

Details: Description Orthopedic Equipment 1 Unit Or Bed (operating Room Bed) Specifications: External Size (lxwxh) 1940x480x770-1020 Mm Built-in Kidney Bridge 0-120 Mm Back Plate Up/down 80°/10° Head Plate Up/down 60°/90° Trendelenburg/reverse Trendelenburg 25°/25° Lateral Tilt Left/right 20°/20° Leg Plate Down 90° Patient Weight Capacity 250 Kg X-rays Translucent Optional With Extra Charge C-arm Compatible No Multi-functional Orthopedic Frame Yes 2 Pieces Or Cabinets Glass Door Specifications: 4 Levels Color : White / Light Grey Thinkness: 21 Guage Or 0.8mm Size: W=40cm,l=90cm,h=185cm Material: All Steel Powder Coated Paint Weight: 48kg Paint: Powder Coat Rust-proof 3 Pieces Small Mayo Table Dimension:44.5*42*79.5-131cm Material: Stainless Steel With Tray For Carrying Instruments Height Of Tray Is Adjustable From76cm To130cm 1 Piece Foot Operated Faucet Specifications: Single Cold Water Tap Outlet + Foot Board + Two 1m Hose Hose Type: Basin Faucet; Basin Not Included Style: Contemporary Hot And Cold Handle: Single Handle Surface Treatment: Chrome Style: Single Handle Single Hole Faucet Installation: Single Hole Flexible Hose: 1 Meter Material: Brass Body, Ceramic Size: 1/2" Thread Weight: 840g 1 Set Balkam Frame Specifications: Orthopaedic Bed With Mechanically Operated Back Rest & Knee Rest By Crank Mechanism. Size: 2140 × 940 × 500 Mm. Epoxy Coated Frame Work With Beautiful Abs Panels. 4 Section Perforated Top. Balkan Frame (made Of Aluminium) With Monkey Bars And Monkey Chains. Collapsible Side Railings. Four Swivel Castor (all With Individual Brakes). Provision For I.v. Rod. Freight Saving Knock-down Construction. 6 Pieces Bed Linens With School Logo Flat,fitted With Pillowcase White, Good Quality Fabric With Git Logo 6 Pieces Pillow Material: Polyester Fiberfill, Cotton Dimension (l X W) 46cmx 71cm 2 Sets Or Gown Free Size Operating Room Gown Head Cap Cotton Ribbed Cuffs Wash And Wear Cotton Material 3 Pieces Patient Gown Free Size Patient’s Gown Back Tie, Open Back Wash And Wear Cotton Material 2 Units Instrument Trolley Stainless Steel Two Shelves Size: 20"w X 48" X 34"h 7 Pieces Kelly Hemostatic Forceps-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 7 Pieces Kelly Hemostatic Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mayo Scissor-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Metzenbaum Scissors-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mosquito Forceps-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Mosquito Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Needle Holder Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Scalpel Handle No. 3 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Scalpel Handle No. 4 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Skin Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 3 Pieces Tissue Forceps (125 Mm) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Thumb Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Pieces Instrument / Mayo Table Dimension:44.5*42*79.5-131cm Made Of Stainless Steel,which Is Reliable,smooth And Elegant With Tray For Carrying Instruments Height Of Tray Is Adjustable From76cm To130cm 3 Tanks Medical Oxygen Tank (big) (20lbs) 20 Lbs Oxygen Tank 4 Pieces Towel Clamp Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Army-navy Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Richardson Retractor-double-end Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Self-retraining Retractor (balfour) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 4 Pieces Halsted Mosquito Forceps-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Mixter-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Mayo Scissor-curved Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Periosteal Elevator Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Chisel/osteotome Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Mallet Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Rongeur Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Holder Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 7 Pieces Twist Drill/drill Bits 100mm-115 Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Gigli Saw (handle And Wire, 500 Mm) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Pin / Wire Cutter Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Pin / Wire Puller Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bonecurette Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Cast Spreader Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Bone Clamp Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Screw Driver (flat Screw Driver For Upper Limb) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Tank Oxygen Unit 20 Lbs Oxygen Tank 1 Piece Rechargeable Emergency Light Specifications: 2 Head (17 Hours, 24pcs Bright Led) 220-240v Ac 50/60hz 6v 4.5ah Sealed Lead Acid Battery 20.24 Hours Charge Time <0.1 Second Response Time Dimensions : 31 X 812x 31.5cm 2 Units Sphygmomanometer, Non-mercurial-adult Cuff Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 2 Units Sphygmomanometer, Non-mercurial-pediatric Cuff Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 1 Piece Thermometer, Non-mercurial-oral Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Piece Thermometer, Non-mercurial-rectal Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Unit Bag Valve Mask Unit (adult) Specifications: Includes Reusable Oxygen Reservoir Bag, Silicon Mask, Oxygen Tubing, And A Plastic Container Powerful, Patient-oriented, And User-friendly Ergonomic, Lightweight Design To Decrease Fatigue During Extended Ventilation Recoils Quickly To Allow Rapid Ventilation Low Valve Resistance For Thorough Airflow Hygienic & Transparent 1 Unit Bag Valve Mask Unit (pediatric) Specifications: Includes Reusable Oxygen Reservoir Bag, Silicon Mask, Oxygen Tubing, And A Plastic Container Powerful, Patient-oriented, And User-friendly Ergonomic, Lightweight Design To Decrease Fatigue During Extended Ventilation Recoils Quickly To Allow Rapid Ventilation Low Valve Resistance For Thorough Airflow Hygienic & Transparent 1 Set Bassinet Stainless Baby Bassinet With Acrylic Neonatal Crib, And Mattress. 1 Set Dilatation/curette Set Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Uterine Sound/hysterometer Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Uterine Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Dull Uterine Curette (300x5, Sharp) Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Sharp Uterine Curette Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Vaginal Retractor Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Vaginal Speculum Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Ovum Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Set Hegars Dilator, Graduated Sizes Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Sponge Forceps Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 1 Piece Metzenbaum Scissor-straight Medical Grade Stainless Steel Fully Autoclavable, Durable, Reusable 2 Units Emergency Cart Specifications: 1 Lumination (adjustable):60,000-180,000lux Bulbs Quantity:80pcs Bulbs Type:led Average Bulb Life:≥80,000h Color Temperature(adjustable):3700k ~5000k Display Index (adjustable):85~98 Focus Depth:≥1200mm Spot Diameter: 160-280mm(adjustable) Bright Adjustment: 1%-100% The Surgeon's Head Heats Up:<1°c Voltage:ac100-240v 50/60hz 1 Piece Kelly Pad Washable And Can Be Sterilized Size: 50x110cm (tube Dia X Overall Length) Material: Rubber 1 Piece Sphygmomanometer Non-mercurial Specifications: Standard Cotton Cuff, Non-stop Pin Manometer 2-tube Adult Size Bladder, Standard Latex Bulb Air-release Valve With Spring, Standard End Valve Manometer : 20-300mmhg Accuracy : ±3mmhg Air System : Velcro Cuff With Weight : 430 G 3 Pieces Stethoscope Specification: Double Dual Head (diaphragm And Bell) Latex Free, Hypo-allergenic, Y Rubber Tube (28 Inches) Non-chill Rim And Diaphragm Ergonomically Designed Headset Snap Tight Soft-sealing Eartips 1 Unit Clinical Height And Weight Scale Specifications: Capacity: 400 Lb X 4 Oz / 180 Kg X 100 G Height Rod: 20- 78in / 76-198cm Platform Size: 10.5” W X 14.5”d/ 27cm W X 37cm D Scale Height: 59”/150cm Weigh Beam- Dual Reading, Die-cast Beam 1 Set Eent Diagnostic Set With Ophthalmoscope And Otoscope Specifications: Fibre Optic-opthalmoscope Otoscope Head With Standard Handle Removable Magnifying Kit Set 2.5v Led Light With Long Life Bulb / Gives Bright Cool Light Grey Plastic Hard Case Irrigation Access For Minor Operation 3 Units Mechanical/patient Bed With Lock, If Wheeled; With Guard Or Side Rails Specifications: Bed Material: Spraying Steel Structure+abs Headboard Bed Size:2100*970*480mm With Mattress Topper Mattress Topper Material:waterproof Oxford Cloth Cover Mattress Topper Innercore: Coconutplam+high Density Sponge Mattress Topper Size:1920*840*80mm With 12mm Bread Wheel With Brake Three Rocker System Adjustment Lifting Weight:65kg Load-bearing: 180kg 5 Units Bedside Table Specifications: Length: 18.70" (47.5cm) Width: 18.70" (47.5cm) Hieght: 29.50" (75.0cm) Abs Engineering Plastic Material With One Food Board, One Drawer, One Small Door (inner With One Shelf Board) Tower Shelf In Lateral Side, Can Be Hiding With Dia.50mm Castors (4) 1 Unit Nebulizer Specifications: Reliable Piston Compressor Effective Medication Delivery One-button Operation Powerful Compressor And Nebulizer Kit Safety Fuse, Auto Off Anti-dry Lightweight And Compact 1 Piece Neurologic Hammer Size: 18cm Color: Black Material: Pvc, Zinc Alloy 1 Piece Thermometer-oral Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free) 1 Piece Thermometer-rectal Accuracy ±0.1/0.1 Power Supply 1 X Ag3lr41 Battery(included) Measuring Range 32~44/89.6~111.2 Specifications: Material: Abs, Silicone (bpa Free)

Details: Description Invitation To Bid For The Supply And Delivery Of Laboratory Equipment - 8 Lots Project Identification No. Pb-008-2024 The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2024 Approved Annual Procurement Plan (pcaarrd Project 4) Intends To Apply The Sum Of Five Million Two Hundred Seventy-five Thousand Pesos (php5,275,000.00) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Laboratory Equipment – 8 Lots With Project Identification No. Pb-008-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2024 Approved Annual Procurement Plan (pcaarrd Project 4) Intends To Apply The Sum Of Five Million Two Hundred Seventy-five Thousand Pesos (php5,275,000.00) Being The Abc To Payments Under The Contract For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Lot No. 1 - Supply And Delivery Of Branded And Brand New Refrigerator - Php55,000.00 Lot No. 2 - Supply And Delivery Of Branded And Brand New Laboratory Freezer - Php100,000.00 Lot No. 3 - Supply And Delivery Of Manual Single Channel Pipette Sets - Php120,000.00 Lot No. 4 - Supply And Delivery And Setup Of Polymerase Chain Reaction (pcr) Workstation - Php500,000.00 Lot No. 5 - Supply And Delivery Of Branded And Brand New Fumehood - Php500,000.00 Lot No. 6 - Supply And Delivery Of Branded And Brand New Plant Growth Chamber - Php500,000.00 Lot No. 7 - Supply And Delivery Of Branded And Brand New Microbial Biosafety Cabinet - Php1,500,000.00 Lot No. 8 - Supply, Delivery, Installation And Orientation Of Automated Pcr Setup Workstation 2,000,000.00 Estimated Total Cost: Php5,275,000.00 The Philippine Fiber Industry Development Authority Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By And Shall Be In Accordance With The Delivery Schedule Under Section Vi. Schedule Of Requirements. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Philfida And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents Can Be Accessed Online Starting November 22, 2024 (friday) And The Hard Copy Can Be Purchased By Interested Bidders Starting November 25, 2024 (monday) From The Given Address And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot No. 1 - Supply And Delivery Of Branded And Brand New Refrigerator - Php55.00 Lot No. 2 - Supply And Delivery Of Branded And Brand New Laboratory Freezer - Php100.00 Lot No. 3 - Supply And Delivery Of Manual Single Channel Pipette Sets - Php120.00 Lot No. 4 - Supply And Delivery And Setup Of Polymerase Chain Reaction (pcr) Workstation - Php500.00 Lot No. 5 - Supply And Delivery Of Branded And Brand New Fumehood - Php500.00 Lot No. 6 - Supply And Delivery Of Branded And Brand New Plant Growth Chamber - Php500.00 Lot No. 7 - Supply And Delivery Of Branded And Brand New Microbial Biosafety Cabinet - Php1,500.00 Lot No. 8 - Supply, Delivery, Installation And Orientation Of Automated Pcr Setup Workstation - Php2,000.00 Bid Docs Total Cost: Php5,275.00 The Philfida Will Hold A Pre-bid Conference On November 29, 2024 (friday) At 1:30 P.m. Through Video Conferencing Via Microsoft Office 365 Teams Which Shall Be Open To Prospective Bidders. Bidder/s Should Submit A Valid Email Address One (1) Day Before The Pre-bid Conference. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Philfida’s Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Diliman, Quezon City On Or Before December 18, 2024 (wednesday) At 9:00 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On December 18, 2024 (wednesday) At 9:30 A.m. At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City To Be Streamed Live Via Ms Office 365 Teams, The Link Of Which Is Available By Request. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Bidders May Opt To Attend Virtually. The Bidders Shall Drop Three (3) Copies Of Their Duly Accomplished Eligibility Requirement, Technical And Financial Proposals In Two (2) Separate Sealed Envelopes In The Bid Box Located At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City. Interested Bidders Are Requested To Contact The Bac Secretariat At Cellular Phone Nos.: 09189402419 And 09983243606 Before Submitting The Bidding Documents. Technical Specifications: Supply And Delivery Of Laboratory Equipment - 8 Lots Lot 1 Supply And Delivery Of Branded And Brand New Refrigerator Technical Specifications: 1. 1 Unit 2. At Least 20 Cu. Ft. 3. Side By Side Doors 4. No Frost Freezers 5. Dual Inverter With Water Dispenser 6. Quick Cooling Feature 7. With Ice Maker 8. Smart Control With Digital Panel Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 2 Supply And Delivery Of Branded And Brand New Freezer Technical Specifications: 1. 1 Unit 2. At Least 17 Cu. Ft. 3. Upright Showcase Freezer 4. No Frost Freezers (-18 Degree Celsius To -22 Degree Celsius) 5. Non-moisture Triple Pane Glass Door 6. With Adjustable Metal Shelves 7. With Inner Led Lights 8. With Digital Temperature Controller Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 3 Supply And Delivery Of Manual Single Channel Pipette Sets Technical Specifications: 1. 2 Units 2. Variable Volume Mechanical Pipettes 3. With Volume Lock Feature 4. Fully Autoclavable 5. Set Of Pipettes Inclusive Of Specific Volume Calibration: A. At Least 1 Pipette With 0.1-2.5 Ul, With 0.002ul Increment B. At Least 1 Pipette With 0.5-10.0ul, With 0.01ul Increment C. At Least 1 Pipette With 2.0-20.0ul, With 0.02ul Increment D. At Least 1 Pipette With 10.0ul-100.0ul, With 0.01ul Increment E. At Least 1 Pipette With 20.0-200.0ul, With 0.02ul Increment F. At Least 1 Pipette With 100-1000ul, With 1ul Increment 6. With Provision Of Liear Pipette Holder Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 4 Supply, Delivery And Setup Of Branded And Brand New Polymerase Chain Reaction (pcr) Workstation Technical Specifications: 1. With 0.3um Hepa Filter And Uv Sterilization System 2. With Washable Polyester Pre-filter 3. With Interlock Function For Safety Purposes 4. With At Least 2 Waterproof Sockets Inside 5. With Anti-uv Motorized Front Window Made With Toughened Glass Panel 6. With At Least 300mm Front Window Maximum Opening 7. Provision Of Shelf With Iv Bar 8. Compatible With 220 Ac Electrical System 9. With At Least 700mm Internal Work Zone Made Of 304 Stainless Steel 10. External Coating Made Of Cold-rolled Steel With Anti-bacteria Coating Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 5 Supply, Delivery And Setup Of Fumehood Technical Specifications: 1. With Lcd Touch Screen Monitor For Control Panel 2. With A Uv Lamp Emission Of 253nanometers 3. With Backup Memory Function For Power-loss 4. With Temperature And Humidity Sensors Display Ambient Conditions 5. Three Side Transparent Acrylic Windows, Front Window Reversal Design 6. With Electronic Control System 7. With Inside And Outside Probe For Detecting Indoor Air Pollution And Filter Conditions 8. With Audio And Visual Alarm For Filter Replacement 9. At Least Internal Working Width Of 900mm 10. With A Minimum Window Opening Of At Least 650 Mm 11. Adjustable Airflow Speed 12. At Least 1 Year Warranty For Parts And Services 13. With Training On Installation And Operation Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 6 Supply, Delivery And Setup Of Plant Growth Chamber Technical Specifications: 1. With Capacity Of At Least 400l 2. With Lcd Control Panel 3. Three-sided Lighting Internal Panels 4. With Temperature Control Range Of 10-50 Degree Celsius (illuminated) 5. Programmable Temperature And Light Cycle 6. With Controllable Humidity Between 50~95%rh 7. At Least 1 Year Warranty For Parts And Services 8. With Training On Installation And Operation Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 7 Supply, Delivery And Installation Of Microbial Biosafety Cabinet Specifications: 1. Certified Class Ii Type A2 Biosafety Cabinet 2. With International Certifications And Compliance 3. Work Zone Made Of Unibody 304 Stainless Steel 4. With Safety Interlock Function 5. With Built-in Hepa Filter And Uv Lamp Sterilizer (with At Least 253 Nanometer Emission), With Aluminum Alloy Frame Hepa Filter Guard 6. With At Least 1000 Lux Working Area Illumination 7. With Lcd Display Monitor, And Remote Control Access For Primary Equipment Function 8. With Anti-uv Front Laminated Window With At Least 5mm Thickness 9. With Automatic Air Speed Adjustment Function 10. With Audio And Visual Alarm System For Parts Replacement And System Malfunction 11. With At Least 1.2m Width Internal Working Zone And At Least 200mm Tested Window Opening Clearance 12. With External Coating Made Of Cold-rolled Steel With Anti-bacteria Powder Coating 13. At Least 1 Year Warranty For Parts And Services 14. With Training On Installation And Operation Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City Lot 8 Supply, Delivery, Installation And Orientation Of Automated Pcr Setup Workstation Specifications: 1. Robotic Workstation For Precise Liquid Handling Intended For Molecular Biology Applications (i.e. Polymerase Chain Reaction) 2. Compact, Benchtop Instrument 3. With Configurable And Flexible System For Various Workflows 4. Built In Hepa / Uv System 5. With Inclusion Of Compatible Laptop With Latest Instrument Software 6. With Inclusion Of Automatic Voltage Regulator, With At Least 1 Kva Capacity Accessories: 1. Adapters: A. At Least 2 Adapter With 96x0.2ml Capacity Compatible For Pcr Tube B. At Least 1 Adapter With 72x0.1ml Capacity Compatible For Strip Tube C. At Least 1 Adapter With 32x1.5ml Capacity Microcentrifuge/ Tapered Tube D. At Least 4 Adapter With 96-tip Rack Capacity 2. Mastermix And Reagent Blocks: A. At Least 1 Block With1x5ml And 4x1.5ml Capacity B. At Least 1 Block With 5x5ml Capacity C. At Least 1 Block With 1x5ml And 4x2ml Capacity D. At Least 1 Block With 16x0.2ml And 8x2ml/1.5ml Capacity 3. Peripherals And Consumables: A. At Least Three (3) Tip Box Set (box And Lid), With Provision Of A Tip Ejector And Box Holder B. Provision Of At Least One (1) Uv Bulb C. Provision Of At Least One (1) Calibration Kit D. Provision Of At Least One (1) Pack Of 50ul Filtered Tips E. Provision Of At Least One (1) Pack Of 200ul Filtered Tips Delivery Period: Forty-five (45) Calendar Days Upon Receipt Of Ntp Delivery Site: Immunology And Molecular Biology Laboratory, Visayas Ave., Quezon City

Details: Without Being Limited Thereto, The Principal Works, Forming Part Of This Contract, Include:  Providing The Complete Mobilization Required For The Execution Of The Works (Crane, Mobile Crane, Containers, Protection, Signalers, Waste Containers, Etc.). Removal Of Existing Roof Components Up To The Existing Concrete Decking With The Cleaning And Resurfacing Works Of The Latter In Order To Provide A Sound And Level Support Surface Prior To The Installation Of The Vapour Barrier.  Removal Of All Existing Metal Flashings, Counter Flashings At Parapets, Appliance Bases And Wall Upstands.  Selective Demolition Work At The Head And Base Of The Walls In The Required Locations In Order To Carry Out The Renovation Work And Their Junctions With The Existing Construction Elements (roofs, Wall Upstands).  The Installation Of A New White Roof Composition, In Two-Layer Elastomeric Membrane, With New Roof Drains, Including All Sealing And Flashing Work, Necessary For The Execution Of The Work. All Of The Work Will Be Guaranteed By The Contractor Jointly With The Membrane Manufacturer For A Period Of Fifteen (15) Years, Including All Components Of The Roof Supplied And Installed (materials & Labor).  The Preparatory Work And Complete Installation Of A Fall Protection System (anchors + Lifelines).  The Installation Of New Ladders.  Waterproofing works (repair, leveling, renovation) at the junctions with existing construction elements (roof, wall upstands): sealing, membrane and membrane and metal flashing works.  All dismantling and temporary support works, storage, reconnection of existing equipment in the areas affected by the works and their reinstallation following the latter.  Coordination of the different trades and the different contractors (roofer, glazier, etc.).  Repair and leveling works for any damage incurred during the execution of this project, with new materials compatible or identical to the existing ones.  All necessary interventions in areas not included in the work, but affected by related works.  The Deployment and Safe Operation of the Site.

Details: Without Being Limited Thereto, The Principal Works, Forming Part Of This Contract, Include:  Providing The Complete Mobilization Required For The Execution Of The Works (Crane, Mobile Crane, Containers, Protection, Signalers, Waste Containers, Etc.). Removal Of Existing Roof Components Up To The Existing Concrete Decking With The Cleaning And Resurfacing Works Of The Latter In Order To Provide A Sound And Level Support Surface Prior To The Installation Of The Vapour Barrier.  Removal Of All Existing Metal Flashings, Counter Flashings At Parapets, Appliance Bases And Wall Upstands.  Selective Demolition Work At The Head And Base Of The Walls In The Required Locations In Order To Carry Out The Renovation Work And Their Junctions With The Existing Construction Elements (roofs, Wall Upstands).  The Installation Of A New White Roof Composition, In Two-Layer Elastomeric Membrane, With New Roof Drains, Including All Sealing And Flashing Work, Necessary For The Execution Of The Work. All Of The Work Will Be Guaranteed By The Contractor Jointly With The Membrane Manufacturer For A Period Of Fifteen (15) Years, Including All Components Of The Roof Supplied And Installed (materials & Labor).  The Preparatory Work And Complete Installation Of A Fall Protection System (anchors + Lifelines).  The Installation Of New Ladders.  Waterproofing works (repair, leveling, renovation) at the junctions with existing construction elements (roof, wall upstands): sealing, membrane and membrane and metal flashing works.  All dismantling and temporary support works, storage, reconnection of existing equipment in the areas affected by the works and their reinstallation following the latter.  Coordination of the different trades and the different contractors (roofer, glazier, etc.).  Repair and leveling works for any damage incurred during the execution of this project, with new materials compatible or identical to the existing ones.  All necessary interventions in areas not included in the work, but affected by related works.  The Deployment and Safe Operation of the Site.

Details: Description Invitation To Bid For The Procurement Of Supply And Delivery Of Ict Supplies And Accessories 1. The Department Of Agriculture-western Visayas, Through The National Expenditure Program 2025 (early Procurement Short Of Award) Intends To Apply The Sum Three Million Seven Hundred Forty Two Thousand Three Hundred Eighty Nine Pesos (php3,742,389.00) Being The Abc To Payments Under The Contract For Procurement Of Supply And Delivery Of Ict Supplies And Accessories/ib No. 2025-012 (gas). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-western Visayas Now Invites Bids For The Procurement Of Supply And Delivery Of Ict Supplies And Accessories With The Following Specifications: Adapter, Hdmi To Hdmi Hdmi Male To Hdmi Female Cable Adapter, 4k@60hz, Maximum Uhd 3840×2160,backwa Rds Compatible 2560x1600, 2560x1440, 1920x1200, 1080p Resolutions, 22 Cm Long 1 Piece Adapter, Usb To Hdmi Usb-c + Usb-a To Hdmi Adapter, 2 Ports, Resolution: 1080p@60hz, Advanced Chip, Mirror And Extended Modes 1 Piece Digital Caliper Measuring Tool, Plastic Vernier Caliper Digitalmicrometer With Lcd Screen (0-150mm) 1 Unit Extension Cord With Voltage Surge Protector, 1 Switch Breaker, 6 Outlets With Ground, 5 Meters Long 106 Pieces Flash Drive 16gb, Usb 2.0, Backwards Compatible With Usb 1.1, Read Speed: 100mbps, Write Speed: 100 Mbps 60 Pieces Flash Drive 64gb, Usb 3.0, Backwards Compatible With Usb 2.0, Read Speed: 150mbps 126 Pieces Flash Drive 64gb, Usb 3.2, Gen 1 Compliant, Transfer Speed: 100mb/s2 5 Pieces Flash Drive 256gb, Usb 3.0, Read Speed: 150mbps 103 Pieces Hdmi Cable 2.1 4k 120hz, 48gbps, 7.3mm, Dynamic Hdr & Earc, Including Vrr, Qms, Qft And Allm, 3 Meters Long, Black 2 Pieces Hdmi Cable High Speed Hdmi 2.0, 4k 3d Cable Metal Case, 60hz, 18gbps, Transfer Rates: 10.2 Gbps / 340 Mhz, Hdcp Compliant, 5 Meters Long, Black, 23 Pieces Headlamp Rechargeable, Waterproof, 80 W, 6500 Mah, 4 Hours Bright Light, 9 Hours Weak Light, 50w Aluminum Reflect Cup With Light Led Source 3 Pieces Ink Bottle, Brother Btd60bk, Black, Genuine 29 Bottles Ink Bottle, Brother Bt5000c, Cyan, Genuine 46 Bottles Ink Bottle, Brother Bt5000m, Magenta, Genuine 46 Bottles Ink Bottle, Brother Bt5000y, Yellow, Genuine 46 Bottles Ink Bottle, Hp Deskjet/smart Tank Gt53 Xl Black 51 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Cyan 53 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Magenta 53 Bottles Ink Bottle, Hp Deskjet/smart Tank, Gt52 Yellow 53 Bottles Ink Cartridge, Brother Lc539xl, Black 20 Cartridges Ink Cartridge, Brother Lc535xl, Cyan 20 Cartridges Ink Cartridge, Brother Lc535xl, Magenta 20 Cartridges Ink Cartridge, Brother Lc535xl, Yellow 20 Cartridges Ink Cartridge, Brother Toner Cartridge, Tn 2260 10 Cartridges Ink Cartridge, Canon Cl-741, Colored 3 Cartridges Ink Cartridge, Canon Cl-811, Colored 3 Cartridges Ink Cartridge, Canon Pg-740, Black 3 Cartridges Ink Cartridge, Canon Pg-810, Black 3 Cartridges Ink Cartridge, Canon Pixma Pgi-35 Black 45 Cartridges Ink Cartridge Canon Pixma Cli-36 Color 35 Cartridges Ink Cartridge, Canon Pixma Printhead Cartridge, G4010 (black) (bh-7) 10 Cartridges Ink Cartridge, Canon Pixma Printhead Cartridge, G4010 (tri Color) (ch-7) 9 Cartridges Ink Cartridge, Epson C13t664100 (t6641), Black 253 Bottles Ink Cartridge, Hp 682, Black 102 Cartridges Ink Cartridge, Hp 682, Tri-color 181 Cartridges Ink Cartridge, Hp Cn692aa (hp704), Black 15 Cartridges Ink Cartridge, Hp Cn693aa (hp704), Tri-color 9 Cartridges Ink Cartridge, Hp Cz107aa (hp678), Black 31 Cartridges Ink Cartridge, Hp Cz108aa (hp678), Tri-color 31 Cartridges Ink Cartridge, Hp F6v26aa (hp680), Tri-color 350 Cartridges Ink Cartridge, Hp F6v27aa (hp680), Black 354 Cartridges Ink Cartridge, Hp L0s60aa (hp955), Black Original 6 Cartridges Ink Cartridge, Hp L0s63aa (hp955xl), Cyan Original 20 Cartridges Ink Cartridge, Hp L0s66aa (hp955xl), Magenta 20 Cartridges Ink Cartridge, Hp L0s69aa (hp955xl), Yellow 20 Cartridges Ink Cartridge, Hp L0s72aa (hp955xl), Black Original 29 Cartridges Ink Refill, Canon Gi-790bk 67 Bottles Ink Refill, Canon Gi-790c 65 Bottles Ink Refill, Canon Gi-790m 65 Bottles Ink Refill, Canon Gi-790y 65 Bottles Ink Refill, Canon Gi-71bk 4 Bottles Ink Refill, Canon Gi-71c 3 Bottles Ink Refill, Canon Gi-71m 3 Bottles Ink Refill, Canon Gi-71y 3 Bottles Ink Refill, Epson (001) Black 307 Bottles Ink Refill, Epson (001) Magenta 224 Bottles Ink Refill Epson (001) Cyan 219 Bottles Ink Refill, Epson (001) Yellow 215 Bottles Ink Refill, Epson (003) Eco Tank, Black 270 Bottles Ink Refill, Epson (003) Eco Tank, Cyan 194 Bottles Ink Refill, Epson (003) Eco Tank, Magenta 194 Bottles Ink Refill, Epson (003) Eco Tank, Yellow 194 Bottles Ink Refill, Epson (008) Eco Tank, Black 2 Bottles Ink Refill, Epson (008) Eco Tank, Cyan 2 Bottles Ink Refill, Epson (008) Eco Tank, Magenta 2 Bottles Ink Refill, Epson (008) Eco Tank, Yellow 2 Bottles Ink Refill, Epson C13t664200 (t6642), Cyan 186 Bottles Ink Refill, Epson C13t664300 (t6643), Magenta 188 Bottles Ink Refill, Epson C13t664400 (t6644), Yellow 188 Bottles Laser Pointer Laser Class 2, 2 Aaa Battery, 2.4 Ghz Wireless Technology 29 Pieces Maintenance Box, For Epson L6160/l6170, C13t04d100 24 Pieces Male Hdmi To Male Hdmi Cable Hdmi 2.0 Male To Male High Speed 18gbps 4k, 30hz, 1080p, 3d Hdmi Ethernet , 2 Meters Long 2 Pieces Male Usb To Male Hdmi Cable Usb 3.0 Male To Hdmi Male Cable, Support Usb2.0, Usb3.0, Output: 1920x1080p@ 60hz, 2 Meters Long 2 Pieces Memory Card, For Camera Use Extreme Pro Sd Card, 1 Tb, Shot Speed: 140mb/s, Read Performance: 200mb/s, Write Performance: 90mb/s 3 Pieces Micro Sd Card, 128gb, Sequential Read Performance: 140mbps, Transfer Speed: 150 Mb/s 64 Pieces Mouse Pad Non-slip Rubber Base, Fine Knit Edges, 25 X 20 X 0.2 Cm 23 Pieces Otg/dual Usb Drive 128gb, Read Speed: 150mb/s , Write Speed: 100 Mbps 104 Pieces Portable Hard Drive 1 Tb, Usb 3.2, Type C Connector, Read Performance: 1050 Mbps; Write Speed 1000 Mbps 22 Pieces Powerbank, 10000mah 20w, Lithium Polymer Battery, Usb-c Input/output: 20w Max, Usb-a Output: 22.5w Max, Battery Capacity: 37wh (10000mah 3.7v), Rated Capacity: 6250mah (5v 3a) 121 Pieces Powerbank, 20000mah 20w, Lithium Polymer Battery, Usb-c Input/output: 20w Max, Usb-a (out 1/out 2) Output: 22.5w, Battery Capacity: 20000mah 3.7v (74wh), Rated Capacity: 12500mah (typ 5v 3a) 7 Pieces Rechargeable Battery Aa, 1.2v, 2450 Mah, Ni-mh Battery, 2 Pieces/pack 4 Packs Rechargeable Battery Aaa, 1.2 V, 900 Mah, Ni-mh Battery, 2 Pieces/pack 4 Packs Ribbon Cartridge For Epson , For Use With Fx-2175/2190 (so15327, 32.0 Meters/ 104.9 Feet) 9 Pieces Solid State Drive, Portable, 500 Gb, Usb 3.2 Gen 2, Read Speed: 1050 Mb; Write Speed: 1000 Mb (max) W/ Usb C To Usb C Cable & Usb A Adaptors 5 Pieces Solid State Drive 256gb, 2.5 Inch Sata Iii, 6 Gb/s, Read Speed: 500mb/s, Write Speed: 320mb/s, Tbw: 80tb 2 Pieces Solid State Drive 1 Tb, Usb 3.2 Gen , 10gb/s, Read Speed: 1050 Mb/s, Write Speed: 1000 Mb/s 3 Pieces Toner Cartridge, Mx-315ft, Black 5 Pieces Toner Cartridge, Tn118 (konica Minolta Bizhub 215) 11 Cartridges Usb 3.0 Hub, 4 Ports Multi- Splitter Otg Adapter 4 Ports, Usb 3.0 Hub, 5 Gbps Transfer Speed, Supports Two 2.5 Inch Capacity 1 Tb Ssd, Backwards Compatible With Usb 2. 0 (480mbps), Usb 1. 1(12mbps), 1 Meter Long 5 Pieces Usb 3.0 Hub, 6 In 1 Sd Tf For Laptop Pc 6-in-1 Usb 3.0 Hub, Tf/sd Double Card Slot 2.0 Protocol, Applicable For 256g Memory Cards, 5 Gbps Transfer Speed, Micro-usb Power Port, 900ma Output Max Current 5 Pieces Wired Keyboard 12 Fn Multimedia Hotkeys, Resolution: 1000 Dpi, 3 Buttons, Usb Port, Cable Length: 150 Cm 7 Pieces Wireless Mouse 1000 Dpi, 3 Buttons, 2d Scroll Wheel, 2.4 Ghz Wireless Connection, 2.4ghz Wireless Connection W/ Usb Nano Receiver, W/ 1 Aa Battery 170 Units 3-pin Power Adaptor Universal Adapter, Compatible With Various Types Of Sockets 12 Pieces Terms And Conditions: • All Items Which Have An Expiration Period Shall Have An Expiry Date Of At Least Two (2) Years After The Date Of The Notice Of Award • The Supplier Must Submit A Copy Of Manufacturer’s Product Brochures, Specification Sheet, Manuals Etc., As Appropriate Of All The Required Items Or Equipment. Any Of These Evidences Should Be Downloadable From Product Or Manufacturer’s Website Or Otherwise Verifiable By Any Means Reasonable And Acceptable To The Bids And Awards Committee. • Certificate That The Supplier Operates A Commercial Physical Store Indicating The Complete Address Where Ict Products Are Displayed And Available For Purchase. Delivery Of The Goods Is Required Within 90 Calendar Days From Receipt Of Notice To Proceed And To Be Delivered At Da-wesviarc, Hamungaya, Buntatala, Jaro, Iloilo City. Bidders Should Have Completed, Within Three (3) Years (2021-present) From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Prospective Bidder Must Be Registered In The Philgeps. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture - Visayas And Inspect The Bidding Documents At The Address Given Below During Office Hours, 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024 – November 27, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00).the Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Agriculture-western Visayas Will Hold A Pre-bid Conference At 9:30 P.m. On November 15, 2024 At The Rcpc Library, Rcpc Building, Da Wesviarc Compound, Brgy. Buntatala, Jaro, Iloilo City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 9:30 A.m. On November 27, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In The Amount Of Any Of The Acceptable Forms And In The Amount Of Php74,847.78 (if The Bid Security Is In The Form Of Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit) Or Php187,119.45 (if The Bid Security Is In The Form Of Surety Bond). In Lieu Of A Bid Security, The Bidder May Submit A Duly Notarized Bid Securing Declaration That Is An Undertaking Which States, Among Others, That The Bidder Shall Enter Into Contract With The Procuring Entity And Furnish The Required Performance Security Within 10 Calendar Days From Receipt Of The Notice Of Award, And Committing To Pay The Corresponding Fine And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event That It Violates Any Of The Conditions Stated Therein As Required In The Guidelines Issued By The Gppb. 9. Bid Opening Shall Be At 9:30 A.m. On November 27, 2024 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture-western Visayas Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. The Department Of Agriculture-western Visayas Does Not Condone Any Forms Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 12. For Further Information, Please Refer To: Zarlina B. Cuello Bac Chairperson Da-wesviarc Compound Brgy. Buntatala, Jaro, Iloilo City Tel. No. (033) 320-23-73 Www.westernvisayas.da.gov.ph Procurement@wv.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps November 7, 2024 Zarlina B. Cuello Bac Chairperson

Details: Description Section I. Invitation To Bid Da8-goods-2025-02 (pr No. Bt-25-goods-consol-39879-0004) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Multiple Fund Intends To Apply The Sum Of Nine Million One Hundred Thirty Thousand Pesos (p9,130,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Agricultural Equipment” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Per Lot (terms And Conditions). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost Lot 1: 2 Number Recirculating Dryer 2,950,000.00 5,900,000.00 Technical Specifications: 1. Type: Recirculating Batch Type 2. Total Maximum Height: 7.2 M 3. Product Quality A. Cracked Grain, % Increase: 3%, Max B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain % Increase:2% Maximum 4. Drying System A. Holding Capacity: 6 Tons Wet Palay @ 24% Moisture Content, Minimum B. Moisture Gradient: 2%, Maximum C. Drying Efficiency: 75%, Minimum D. Drying Rate: 1% /hr, Maximum E. Drying Loss/spillage: 1%, Maximum F. With Compatible Electric Motor For Drying System G. Vertical Rectangular Bin- Consist Of Rectangular Vertically Installed Drying Chamber H. With Control Panel I. With Mimic Flow Of Operation J. With Basic Electrical Meter Such As Ammeter And Voltmeter Display 5. With Basic Safety Cut-off Features: A. Emergency Shutdown Button B. With On-off Pilot Lights Switch Button And Indicating Operating Motor, Each Component With Motor Should Have Individual Circuit Breaker C. With Magnetic Starter With Overload D. With Interlocking System And Emergency Button 6. Construction: Stainless Steel-astm 304 For Following Parts Such As: A. Drying Bin Wall/cover B. Discharge Chute C. Elevator Casing D. Bottom Boot Section Of The Elevator E. Drying Chamber: Perforated Screen For Non-lsu Type Or Inverted V-duct For Lsu Type F. Auger G. Auger Casing H. Receiving Hopper 7. Mounting Frame A. Steel Angular Bar (50mmx50mmx6mm, Minimum) B. Mounting Frame Shall Be Fitted With Brackets For Contrete Floor Installation 8. With The Following Components: A. Heating System 1 I. Petroleum Based Fuel: Direct Fired Ii. Heating System Efficiency: 90%, Minimum Iii. With Following Accessories:  Flame Sensor  Electronic Ignition System  Automatic Fuel Shut-off  Adjustable Fuel Vaporizer  Automatic Temperature Control  Temperature Monitoring System  Galvanized Fuel Container Made Of Non-corrosive And Heat-resistant Material At 200 Liters Capacity, Minimum  Compatible Electric Motor For The Heating System B. Heating System 2 I. Biomass Fuel: Indirect-fired Ii. Heating System Efficiency: 50%, Minimum Iii. Can Provide The Required Heating Temperature Or Can Provide 70°c Drying Temperature Iv. Heat Exchanger: Made Of Fire Tubes V. Burning Chamber: Made Of Refractory Bricks  With Automatic Fuel Feeder: Auger/air Blown/plunger Type (provided That The Feeder Is Not Directly Exposed To The Burning Fuel) Vi. With The Following Accessories:  With Temperature Control  With Compatible Electric Motor Vii. Burning Efficiency Of Biomass Furnace: 95%, Minimum  With Compatible Electric Motor C. With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2 I. Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet D. Dust Collection System Consist Of Cyclone Separator/collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 9. With Following Accessories: A. Generator Set I. Capacity: Compatible To The Drying System, Able To Provide Sufficient Continuous And Peak Power Requirements Of The Drying System Ii. Voltage Requirement Compatible To The System Iii. Power Supply/generating System Should Be Brand New Iv. Provided With Mechanical Transfer Switch (mts) V. The Electrical Wire, Wire Accessories, And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided By The Bidder Vi. With The Thermal Insulation And Noise Suppressor B. Portable Handheld Moisture Meter I. Grain: Paddy, Rice, And Other Grains (optional) Ii. Type: Capacitance Iii. Moisture Range:12-25% Or Wider Iv. Accuracy: ≠0.5% Or Better V. Lcd/led Display Vi. Battery Operated Vii. Automatic Density And Temperature Compensation Viii. Product Brochure With Technical Specifications In English C. Standard Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium I. One (1) Set Socket Wrench (no. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32, Minimum) Ii. One (1) Set Combination Wrench (open And Box, 10 Pcs-size Appropriate To The Drying System) Iii. Electrical Plier, 200mm, Minimum Iv. Screwdriver: Philips And Flat Head, 300mm,minimum V. Grease Gun, 250mm Cylinder Length, Minimum Vi. Mechanical Pliers, 200mm, Minimum Vii. Heavy Duty Toolbox And Roll Up Tools Holder  Size That Could Accommodate The List Of Tools D. Vacuum Cleaner With Air Blower I. Rated Input Power:1,000 W, Minimum Ii. Vacuum Cord: 5m, Minimum E. Basic Safety Kits F. Personal Protective Equipment  Dust Mask  Safety Goggle  Ear Muff/ear Plug G. One (1) Unit Fire Extinguisher H. Dry Chemical, Stored Pressure Type, 6.80 Kg, Minimum I. Automatic Portable Bag/sack Closer/sewer 10. With Compatible Biomass Furnace 11. With Compatible Transformer 12. Provide Reflectorized And Waterproof Da-rice Logo (12" X 12") Lot 2: 2 Number Walk Behind Transplanter 400,000.00 800,000.00 Technical Specifications: 1. 4 Stroke Gasoline Engine At 4 Hp, Minimum 2. Number Of Planting Rows: 4 Rows, Minimum 3. Row Spacing: 30 Cm 4. Hill Spacing: 12-21cm, Adjustable 5. Field Efficiency: 80%, Minimum 6. Percent Damaged Hills And Percent Missing Hills: 10%, Maximum 7. Noise Emitted: 92db, Maximum 8. With Low Bed Trailer 9. With Manually Operated Seed Sowing Machine With Valid Amtec Test Report 10. With Compatible Seedling Tray: 500 Pcs, Minimum A. Dimension: 60cm X 30cm X 3.5cm (length X Width X Thickness) B. Hole Aperture: 1-1.5mm 11. Holder And Accessories Required For Maintenance With Full Dealer Optional Parts 12. With Original Equipment Manufacturers Manual Written In English. 13. With The Following Standard Heavy Duty Tools And Accessories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. .provide With Extra 2 Liters Engine Oil 14. Provide Reflectorized And Water Resistant Da-rice And Da-noap Logo (4" X 4") 15. Conform To Paes/pabes 151:2015 16. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 3: 1 Number Float-assist Type Walking Type Tractor (floating Tiller) 130,000.00 130,000.00 Technical Specifications: 1. Type: Mudboat 2. Rated Power: Minimum Of 10 Hp Diesel Engine, Aircooled 3. Fuel Consumption: Maximum Of 2.5li/hr 4. Continuous Power: 85% Of Rated Power, Minimum 5. Peak Transmission: 80%, Minimum 6. Total Cutting Width: 1.0 Meter Minimum 7. Noise Emitted: 95 Db, Maximum 8. Complete With Throttle Lever And Clutch Lever On The Handle Bar 9. The Unit Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 10. With The Following Standard Heavy Duty Tools And Accesories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. Provide With Extra 2 Liters Engine Oil 11. Provide Reflectorized And Water Resistant Da-rice Logo (4" X 4") 12. Conform To Paes/pabes 347:2022 13. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 4 2 Number Rice Mill (single Pass) 1,150,000.00 2,300,000.00 Technical Specifications: 1. Rubber Roll Dehuller 2. Input Capacity: Minimum Of 0.5 Ton/hr At 98% Purity 3. Hulling Efficiency: 75% Minimum 4. Prime Mover: 23 Hp Diesel Engine (minimum), Watercooled With Brand New Battery (atleast 3sm) 5. Milling Recovery Index: 0.98 Min. 6. Percent Head Rice Index: 0.90 Min. 7. With Protection For All Moving Parts 8. With Pre-cleaner A. Input Capacity: Should Be Compatible With The Hulling Capacity Of The Units To Be Supplied (375kg/hr Minimum) 9. With Trailer A. Steel Made Channel Reinforced By Steel Angular Bars B. Leaf Spring Suspension System C. With Brand New Tires (pneumatic) D. With Reflectorized Slow Moving Vehicle Emblem 10. With Bucket Elevator A. Material: Plastic 11. With The Following Standard Heavy Duty Tools And Accessories: A. One (1) Unit Weighing Scale With 500kg Capacity Minimum B. One (1) Piece Calibrated Grain Moisture Monitoring Device (portable Handheld Moisture Meter) J. Grain: Paddy And Rice Ii. Type: Capacitance Iii. User’s Manual In English C. With Fire Extinguisher For Fire Caused By Flammable Liquids I .class B Ii. Six (6) Liters Capacity D. Open Wrench Set E. Adjustable Wrench (12") F. Grease Gun G. Philips And Flat Screw Driver H. Roll Up Tools Holder I. Provide Personalized/ Fitted Material (water Resistant) For Covering J. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves K. Provide With Electric Driven Power Sprayer/ Pressure Washer Automatic Type L. Provide With Electric Blower That Has Minimum Of 700w Rated Input Power M. Provide With Extra 2 Liters Engine Oil 12. Provide Operation Equipment Manual 13. Provide Reflectorized And Water Resistant Da-rice Logo (6" X 6") 14. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Terms And Conditions: A During The Opening Of Bids, Bidders Shall Submit: 1 Certificate Of Accredited Service Center Within The Region That Could Respond Within 72 Hours (including Holidays And Weekends) Upon Request Of The End-user/beneficiary; 2 Namdac Certificate Of Accreditation; 3 Section Vii (technical Specifications) Of Bidding Document, Which Must Be Signed And Sealed By Licensed Agricultural Engineer/agricultural Biosystems Engineer; 4 Valid Amtec Test Report: I. Recirculating Dryer With A Similar Drying System Conform To The Pns.paes 201:2015 Standard For Moisture Gradient, Drying Rate, Product Quality, Drying Loss/spillage, Drying Efficiency, And Heating System Efficiency. Should Be Provided With Separate Amtec Test Report For Both Heating System. Ii. Engine Iii. Float-assist Type Walking Type Tractor (floating Tiller) Coupled With The Offered Engine Iv. Mechanical Rice Transplanter (walk-behind) Coupled With The Offered Engine V. Rice Mill (single Pass) Coupled With The Offered Engine 5 Warranty Certificate For Services, Parts, And Other Components Due To Manufacturing Defects Upon Acceptance With Minimum Of Two (2) Years For Lot 1 Only; 6 Warranty Certificate For The Machinery And Equipment Being Offerred For Lot 2, 3, & 4 Only: A. Minimum Of 1 Year For Engine From Date Of Acceptance B. Minimum Of 1 Year On Parts And Services From Date Of Acceptance. 7 Valid Certificate Of Dealership/distributorship/authority To Sell; 8 Certification Guaranteed Spare Parts Availability For At Least Five (5) Years For Lot 1 Only; 9 Permit To Operate (pto) From Bafe; B During Post-qualification, The Bidder Shall Submit: 1 Provide Certification Of Very Satisfactory Performance Of The Recirculating Dryer Being Offered As To: I) Machinery Performance; Ii) Machinery Durability And; Iii) Availability Of Parts And Service, Issued By Any Government Or Private Company Agency/company In Asian Countries, Excluding Da-rfo8, Duly Signed By The Current Head Of Agency/company Within The Last One (1) Year. The Bidder Shall Provide List Of Five (5) Customer/clients With Addresses And Contact Numbers, And Certification From At Least One (1) Customer/client Issued By Any Government For Lot 1 Only; 2 Manufacturer's Distributor's Or Bidder's Certification That The Proposed Grain Dryer Brand Has Been In The Market For The Last 5 Years, Accompanied Or Duly Supported By Documentary Proof. The Documentary Proof Must Be Verifiable Through Phone Call, Ocular Inspection Or Both, Covering The Period Beginning From 2019 Or Erlier And Maybe Any Or A Combination Of The Following (for Lot 1 Only): A. Record Of Sales B. Dealership Or Servicing Agreements Indicating The Brand Subject Thereof C. Manufacturer's Or Distributor's Certification Of Market Presence, Indicating The Name/s And Address/es Of The Dealers D. Bill Of Lading And/or Other Similar Records Indicating Shipment Or Delivery Of The Grain Dryer Brand To The Philippines E. Client's Affidavit Indicating Client's Complete Address And Telephone Number, Brand, Type, And Model Of Grain Dryer, Date Of Purchase And Duly Supported By Physical Proof Of Grain Dryer 3 Copy Of Equipment Manufacturer's Manual (in English) For Lot 1 Only: A. Recirculating Dryer Unit And Each Component Such As Drying Unit, Drying System, Generator Set, And Portable Handheld Moisture Meter Written In English/filipino 4 Certificate Of Conformity From Bafe I. Recirculating Dryer Ii. Mechanical Rice Transplanter (walk-behind) Iii. Float-assist Type Walking Type Tractor (floating Tiller) Iv. Rice Mill (single Pass) C Winning Bidder/s Shall: 1 Deliver And Install Genuine, Unaltered, And Brand New Units; 2 Conduct Formal Training, After Complete Delivery And Installation Of The Items, For The Operation And Maintenance Of The Equipment To At Least Two (2) Operators And Provide Copies Of The Training Module Written In English/filipino; 3 Deliver And Install (if Necessary) The Units To The Intended Recipients As Indicated In The Attached List Of Delivery Points Upon Receipt Of Ntp. Lot 1: Within 60 Calendar Days Lot 2: Within 30 Calendar Days Lot 3: Within 20 Calendar Days Lot 4: Within 60 Calendar Days 4 Shoulder The Delivery And Handling Cost To The Specified Drop-off Point, Materials For Testing, Fuels, And Other Necessary Requirements. 5 Inform The End-user And General Services Section (gss) Seven (7) Calendar Days Prior To The Schedule Of Delivery; 6 Non-stainless Material Should Be Painted With Rust-proofing Primer And Final Paint Color For Lot 1 Only D Any Delay Of Delivery Of Item Shall Be Subjected To Liquidated Damges Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; E Payment Scheme: A. 100% Payment Shall Be Made Upon Complete Delivery, Inspection, Amtec System Testing (test Report With Acceptable Rating), After The Conduct Of Training In The Operation And Maintenance Of The Machineries And Equipment; And Acceptance Per Lot F Winning Bidder/s Shall Submit A Snapshot Of Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 03, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents Shall Correspond To The Total Abc Of The Selected Lot/s On Which The Supplier Intends To Bid, With A Range As Indicated In The Table Below. Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Details: Description Philippine Bidding Documents (as Harmonized With Development Partners) Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Government Of The Republic Of The Philippines Sixth Edition November 2024 Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….2 Section I. Invitation To Bid……………………………………………………..5 Section Ii. Instructions To Bidders…………………………………………...8 1. Scope Of Bid ………………………………………………………………………. 9 2. Funding Information………………………………………………………………. 9 3. Bidding Requirements ……………………………………………………………. 9 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 9 5. Eligible Bidders…………………………………………………………………… 9 6. Origin Of Goods ………………………………………………………………….. 10 7. Subcontracts ……………………………………………………………………… 10 8. Pre-bid Conference ………………………………………………………………. 10 9. Clarification And Amendment Of Bidding Documents …………………………… 10 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 10 11. Documents Comprising The Bid: Financial Component …………………………... 11 12. Bid Prices …………………………………………………………………………. 11 13. Bid And Payment Currencies ……………………………………………………… 12 14. Bid Security ………………………………………………………………………. 12 15. Sealing And Marking Of Bids ……………………………………………………… 12 16. Deadline For Submission Of Bids …………………………………………………. 13 17. Opening And Preliminary Examination Of Bids ………………………………….. 13 18. Domestic Preference ……………………………………………………………… 13 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 13 20. Post-qualification ………………………………………………………………… 14 21. Signing Of The Contract …………………………………………………………… 14 Section Iii. Bid Data Sheet …………………………………………………..15 Section Iv. General Conditions Of Contract ……………………...………..17 1. Scope Of Contract ………………………………………………………………… 18 2. Advance Payment And Terms Of Payment ……………………………………….. 18 3. Performance Security ……………………………………………………………. 18 4. Inspection And Tests ……………………………………………………………… 18 5. Warranty …………………………………………………………………………. 18 6. Liability Of The Supplier ………………………………………………………….. 19 Section V. Special Conditions Of Contract ………………………………….20 Section Vi. Schedule Of Requirements ……………………………………....23 Section Vii. Technical Specifications …………………………………………24 Section Viii. Checklist Of Technical And Financial Documents …………..26 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Invitation To Bid For The Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) 1. The Leyte Regional Prison, Through The National Expenditure Program (nep) F.y. 2025 Intends To Apply The Sum Of Seventy Thousand Pesos Only (₱70,000.00) Being The Abc To Payments Under The Contract For Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Leyte Regional Prison, Now Invites Bids For The Above Procurement Project. Goods/tarpaulins Must Be Delivered On Or Before The Day Of The Each Events. Contract Will Start From The Receipt Of Notice To Proceed (ntp) And Contract Agreement Up To Dec. 31, 2025. Bidders Should Have Completed, Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Equivalent To At Least Twenty-five Percent (25%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Leyte Regional Prison Bac Secretariat Using The Contact Below And Inspect The Bidding Documents At The Address Given Below During Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 19, 2024 8:00am - 5:00pm To November 27, 2024 8:00am – 12:55pm From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (₱500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees And Presented In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 27, 2024 @ 12:55pm. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On November 27, 2024 @ 1:00pm At The Lrp – Conference Room, Administration Building, Leyte Regional Prison. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. Schedule Of The Bidding Activities Shall Be As Follows: Activites Date/time Venue 1. Sale And Issuance Of Bid Documents November 19, 2024 8:00am To 5:00pm To November 27, 2024 8:00am To 12:55pm Office Of The Bac/bac Secretariat, Leyte Regional Prison, Abuyog, Leyte 2. Submission And Opening Of Bid Documents November 27, 2024 1:00pm Conference Room, Admin Building, Lrp, Abuyog, Leyte 10. The Lrp Bac Shall Use Non-discretionary And Non-discriminatory Measure Based On Sheer Luck As A Tie-breaking Tool (draw Lots) In The Event That Two Or More Bidders Were Declared As Lcrb In-order To Determine The Final Lcrb Based On The Following: I. In Alphabetical Order, The Bidder Shall Pick One Rolled Paper Ii. The Lucky Bidder Who Would Pick A Paper With “congratulations” Remark Shall Be Declared As The Final Lcrb And Recommended For The Award Of The Contract. 11. The Leyte Regional Prison Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: The Office Of The Bac Secretariat Leyte Regional Prison, Abuyog, Leyte Email: Lrpbac@bucor.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.bucor.gov.ph/ Www.philgeps.gov.ph Date Of Issue: November 19, 2024. Mr. Tracy B. Soriano, Msca Bac Chairperson Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Leyte Regional Prison Wishes To Receive Bids For The Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) With Identification Number Bid 2024-07. The Procurement Project For Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Is Composed Of One (1) Lot, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Seventy Thousand Pesos Only (₱70,000.00). A. The Source Of Funding Is National Expenditure Program. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address {[insert If Applicable] And/or Through Videoconferencing/webcasting} As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 11.5. Financial Proposals For Single Or Multi-year Framework Agreement Shall Be Submitted Before The Deadline Of Submission Of Bids As Prescribed In The Ib. For Multi-year Framework Agreement, Evaluation Of The Financial Proposal During This Stage Is For Purposes Of Determining Eligibility And Whether Or Not Such Financial Proposal Is Within The Abc. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. A. Payment Of The Contract Price Shall Be Made In Philippine Pesos 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until March 27, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On November 27, 2024 @ 1:00 Pm At Lrp Administrative Building Conference Room As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items That Shall Be Awarded As One Contract. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.1. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Any Tarpaulin Printing & Services. B. Completed Within The Last Two (2) Years Equivalent To At Least Twenty-five Percent (25%) Of The Abc, Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 No Further Instruction. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than ₱1,400.00, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than ₱3,500.00 If Bid Security Is In Surety Bond. 15 Electronic Copy/electronic Submission Is Not Allowed Each Bidder Shall Submit One (1) Original Copy And Three (3) Photocopies Of The First And Second Components Of Its Bid. 19.4 One Project Having Several Items That Shall Be Awarded As One Contract. 20.1 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (sales Invoice Or Official Receipt Or End-users Acceptance) 3. Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – Delivery Of The Tarpaulins Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi. Schedule Of Requirements. Upon Delivery Of The Tarpaulins To The Project Site, The Supplier Shall Notify The Procuring Entity And Present The Following Documents To The Procuring Entity: (i) Original And Four Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; (ii) Delivery Receipt Detailing Number And Description Of Items Received Signed By The Procuring Entity’s Representative At The Project Site; (iii)certificate Of Acceptance/inspection Report Signed By The Procuring Entity’s Representative At The Project Site; For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: The Delivery Terms Applicable To This Contract Are Ddp Delivered To Leyte Regional Prison, Brgy. Cagbolo, Abuyog, Leyte. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The End-user, Or His Duly Authorized Representative. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Not Allowed Cost For E-vat And Other Governmental Costs Which Fall Equally On All Prospective Suppliers Are Presumed To Be Included In The Computation Of The Bid Price 4 The Inspections And Tests That Will Be Conducted Are: The Specifications Stated In Section Vii – Technical Specifications Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item No. Description Quantity Delivery Schedule 1 Tarpaulins 2,800 Sq. Ft. Tarpaulins Must Be Delivered On Or Before The Day Of The Each Events. Contract Will Start From The Receipt Of Notice To Proceed (ntp) And Contract Agreement Up To Dec. 31, 2025 The Quantity/units Is For Bidding Purposes Only. In The Actual Implementation Of The Contract, The Quantity/units That May Be Required May Increase/decrease As The Need Arises. I/we Hereby Commit To Comply And Deliver All The Above Requirements In Accordance With The Above Stated Schedule. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Section Vii. Technical Specifications Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Section Vii. Technical Specifications Item Specification Statement Of Compliance 1 Tarpaulin Tripal Tent 100% Pure 2 Waterproof Sheet For Domestic And Industrial Purpose 3 Extra Strong Heavy Duty Plastic 4 Sizes Be Measure In Feet 5 Sizes And Designs May Vary Based On End-user Needs 6 170 Gsm 7 All Edges With Rope Reinforced Hence To Avoid Tear During Stressful Applications 8 Reinforced All Corners With Aluminum Eyelets For Secure With 1 Extra Eyelets At Any Corner. 9 Ideal For General Cover Tent Fly, Camping Ground Sheet, Car Covers, Boat Covers, Machine Covers, Lumber Covers, Wind Protectors, Haystack Cover, Privacy Walls, Picnic Mats And Pool Cover 10 Fully Waterproof 11 Good Quality 12 Durable And Light Weight 13 Easy To Use And Carry 14 Prevents Dust Emission 15 Water Proof, 100 % Uv I Hereby Certify That The Statement Of Compliance To The Foregoing Technical Specifications Are True And Correct, Otherwise, If Found To Be False Either During Bid Evaluation Or Post- Qualification, The Same Shall Give Rise To Automatic Disqualification Of Our Bid. ___________________________________________ Name Of Company In Print ___________________________________________ Signature Over Printed Name Of Authorized Representative Section Viii. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Ix. Bidding Forms Company Letterhead Statement Of Ongoing Government & Private Contracts Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Bid Reference No.: Bid2024-07 Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Value Of Outstanding Contract Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Bid Reference No.: Bid2024-07 Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Fifty Percent (50%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Kind Of Goods Amount Of Contract Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Delivery End User’s Acceptance Or Official Receipt(s) Or Sales Invoice Issued For The Contract, (attached Copy) Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Bid Reference No.: Bid2024-07 Certificate Of Net Financial Contracting Capacity ((please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _________________________(p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _______day Of __________2024 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Bid Reference No.: Bid2024-07 Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: [insert Reference Number] To: Leyte Regional Prison I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. [insert Name Of Bidder’s Authorized Representative] [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Bid Reference No.: Bid2024-07 Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Of The Leyte Regional Prison As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Of The Leyte Regional Prison, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid). 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ________ And His/her Community Tax Certificate No. _______ Issued On ____ At ______. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Bid Reference No.: Bid2024-07 Bid Form Date: Invitation To Bid No: Bid 2024-07 To: Mr. Tracy B. Soriano, Msca Bac Chairperson Leyte Regional Prison Abuyog, Leyte Gentlemen And/or Ladies: Having Examined The Bidding Documents Including Bid Bulletin Numbers Bid2024-07, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply & Deliver Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) In Conformity With The Said Bidding Documents For The Sum Of __________________________________________₱ ________ Or Such Other Sums As May Be Ascertained In Accordance With The Schedule Of Prices Attached Herewith And Made Part Of This Bid. We Undertake, If Our Bid Is Accepted, To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements. If Our Bid Is Accepted, We Undertake To Provide A Performance Security In The Form, Amounts, And Within The Times Specified In The Bidding Documents. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Of The Bidding Documents. I/we Likewise Certify/confirm That The Undersigned, [for Sole Proprietorships, Insert]: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], Has The Full Power And Authority To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract, On The Latter’s Behalf For The Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid). We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Dated This ________________ Day Of ________________ 20______. [signature] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of ____________________________ Republic Of The Philippines Department Of Justice Bureau Of Corrections Leyte Regional Prison Abuyog, Leyte Schedule Of Prices Supply & Delivery Of Tarpaulins For Various Lrp Seminars, Trainings, Workshops, Events, Programs, & Activities For The Year 2025 (rebid) Qty. Unit Of Issue Agency Specification Abc Unit Price Total Bid Price Inclusive Of Vat 2800 Sq. Ft Tarpaulins ₱70,000.00 Total Bid Price Inclusive Of Vat In Words The Quantity And Unit Of Issue Is For Bidding Purposes Only. In The Actual Implementation Of The Contract, The Quantity That May Be Required May Increase/decrease As The Need Arises. [signature] [in The Capacity Of] Duly Authorized To Sign Bid For And On Behalf Of ____________________________

Details: Description 1 Unit “silyasi/kawali” Big Size Makapal Aluminium Frying Pan(76*69cmx23cm) Extra Xl 1 2 Unit 0.9m Cake Display Chiller: Glass Fresh-keeping Cabinet Function: Chiller Temperature 0-10⁰c. 1 3 Pack 1000 Pcs/pack 1.5cmx205cm Paper Cup Cake Liner 1 4 Set 2 In 1 Electric Power Tool Set Grinder 9556nb Model (continuous Rating Input 850w, Wheel Diameter 100mm, 220v~3.8a) 5 5 Sacks Sacks Rice (25kg) 3 6 Pc 2000w And 220v Electric Heater Shrink Gun Heat Air Bottle Plastic Sealer Temperature Adjustable 1 7 Set 24 Pcs Piping Bags And Piping Tip Set Stainless Steel Baking Tools 1 8 Set 275 Gallons Ibc Tote With Valve 1000l Intermediate Bulk Container Steel Cage With Plastic Drum 1 9 Unit 4 Burner Gas Range Cooker Gas W/ Oven Comes With Free Gas Cylinder 9 10 Set 4pcs Chisel Wood Carving/sculpting Set: ¼, ½, ¾, 1 1 11 Set 4threads Edging Sewing Machine, Overclock Heavy Duty, Industrial With Table And Stand/accessories 1 12 Set 5 In 1 Stainless Steel Kitchen Utensil Tool (serving Spoons) 2 13 Pc 5 Layers Cake Glass Cabinet (4x4x4ft) 1 14 Unit 5.5l Electric Stand Mixer For Baking With Bowl And 3 Whisks 6 Speed Settings (1200w, 220v50/60hz, Ac Motor, 1.63 Hp., Dimension: 368x246x325mm) 13 15 Unit 6kg/0.5g Waterproof Food Digital Weighing Scale Rechargeable Scale Digital Led Display Kitchen Scale 1 16 Set 6pcs/set Stainless Food Warmer (34x28x16cm) (2sets) 6 17 Set 8 In 1 Stainless Steel Stock Pot Casserole With Cover (4pcs Body And 4 Pcs Cover) 3 18 Set 8.0” 62hrc Hardness 6cr Stainless 5 Hair Scissors Kit + Comb + Hemostatic Forceps Hair Cutting Scissor Kit 6 19 Pcs 8” Tailor Scissor Heavy Duty 2 20 Unit 9inch Band Sawing Cutting Machine Wire Saw Puzzle Wood Working Sawing Machine (specs: 220v~50hz, Power 550w, Cut Height 89mm, Saw Blade Circumference 1511mm Wide 6-13mm, Throat Depth 232mm, No Load 1400r/min, Packing 795x342x426mm, Led Lighting /laser Tool Setting) 1 21 Pc Adjustable Multihead Atomizer Nozzle For Garden & Lawn Watering 2 22 Unit Air Compressor – Portable ½ Hp; Max Pressure: 85psi, 3.7cfm, 46l Tank Capacity 1 23 Unit Air Compressor Coupled Type : Specs: Model/power: 2hp; 1720rpm ; Pole: 4 ; Cap: 160l/min ; Max. Pessure:115psi ; Displacement: 3.7 Cfm ; Pressure: 8kg/cm3 ; Tank Capacity: 25 L 2 24 Unit Air Compressor Coupled Type; Specs: Model/power: 2hp; 1720rpm; Pole: 4; Cap: 160l/min; Max.; Pessure:115psi; Displacement: 3.7 Cfm; Pressure: 8kg/cm3; Tank Capacity: 25 L 4 25 Sack All Purpose Flour 50 Kgs 5 26 Pcs Aluminum Baking Square Pan 8x8x2 4 27 Set Baking Pans (6,8,9,10”) 2 28 Unit Banana Slicer Machine (stainless Steel, 0.5hp W/ Detachable Blade) 2 29 Unit Barber Chair (hydraulic, Reclining: 6ft.fixed Arms) 2 30 Pc Big Ladle 53cm 2 31 Unit Big Pot (#2) 1 32 Pcs Big Strainer 2 33 Pcs Bilao Medium Size (12”) 200 34 Pcs Bilao Small Size (10”) 320 35 Pcs Black Linen Fabric 35”l X 59” W Per Yard (30yards/yard) 4 36 Cone Black Polyester Sewing Thread 3000m/cone 80 37 Sack Cake Flour 50kgs 2 38 Set Cake Pan Set Of 6 Aluminum Materials: #1. 11.5x2.5 , #2. 10.5x2.5 , #3. 9.75x2.5 , #4. 8.75x2.5 , #5. 8x2.5 , #6. 7x2.5 1 39 Pc Cake Turntable Baking Tool 27cm 1 40 Pack Cap Seal For Gallon Round And Slim Container 1 41 Pcs Cast Iron Gas Stove Heavy Duty Single Burner Automatic Ignition Gas Stove Low Pressure 21a/31a, #773 (gas Powered, Heat Output Value 26,000btu/h) 1 42 Pcs Chopping Board 2 43 Unit Circular Saw (1050w,220v,185mm 7-1/4”) Wood Cutter Original With Handle 6 44 Pc Coffee Broiler/percolator Stainless Steel (10l) 2 45 Unit Commerce Heavy Duty Manual Cup Sealer Sealing Machine Plastic Cup (17cm+300film+ring) Complete Set 1 46 Unit Commercial Automatic Plastic Bag Film Sealing Machine (power: 350w, Maximum Sealing Length: 30cm) 1 47 Unit Corn Fertilizing Tol, Top Dressing Device 1 48 Unit Corn, Peanut, Coffee, Rice Heavy-duty Commercial Grinder Wet And Dry (volts: 220v 50-60hz, Motor Power: 2.2kw, Motor Rotational Speed: 1,400r/min., Dimension: 46x25.5x28cm) 5 49 Box Cutting Disk 4” For Metal Per Box 25pcs 1 50 Unit Diesel Water Pump Engine Model Ym178f, Suction 80mmm, Discharge Capacity 50m3/h, Total Head Lift 26m, Self-priming Time 180s/4m, Max Suction Head 8m 12 Hp. 7 51 Unit Double Burner Gas Stove 2 52 Unit Double Quencher Dispenser W/ Free Ladle 1 53 Unit Double Stove Single Cylinder Gas Type Deep Fryer + 2 Frying Baskets Type ; Capacity: 8l+8l ; Machine Size: 55x39x28.5cm ; Valve Type: Low Pressure Valve 4 54 Unit Electric Circular Saw Machine 235mm (9-1/4”) Model: 5900b (1400w, Blade Diameter 235mm, Max Cutting Capacities: At 90°85mm-at 45°60mm, 220v~50/60hz, Power Supply Cord 2.0m) 6 55 Unit Electric Drill Original Variable Speed (power Input: 240v~50/60hz, Continuous Rating Input: 650w) 2 56 Unit Electric Hair Clipper (set With Accessories Comb Size: Cutting Length 3mm,6mm,10mm,13mm) 5 57 Unit Electric Jigsaw Power Tool Wood Set ; Material: Reinforced Nylon Iron ; Voltage: 220, Power: 900w No Load Speed :0-3000rpm Speed Adjustment: 5 Level ; Max. Cutting Capacity: 65mm (wood), 6mm (steel) ; Grinding Materials: Wood, Plastic, Pvc, Aluminum Product, Metal Etc. 5 58 Unit Electric Oil Expeller Food Grade Stainless Steel German Cutley Steel Height 27.3 Cm, Length 36.7 Cm, 220/110 Volt, Motor Power 1500 W Frequency 50 Hz ; 1 Oil Press Machine,1 Stainless Steel Oil Cup, 1 Power Cord, I Glove,1 Hard Cleaning Brush, 1 Manual 1 59 Unit Electric Oven 90l 1 60 Unit Electronic Multifunction Weeding Tool 1 61 Unit Extension Wires Heavy Duty 50m Long Extension Cord Socket (50m) 6 62 Sacks Feeds Fattener (50kg/sack) 3 63 Sacks Feeds Finisher (50kg/sack) 12 64 Sacks Feeds Grower (50kg/sack) 18 65 Sacks Feeds Pre-starter (50kg/sack) 1 66 Sacks Feeds Starter (50kg/sack) 8 67 Unit Filled Gas Tank Gasul 1 68 Sacks Flour (all-purpose) 2 69 Sacks Flour (cake) 2 70 Roll Flux Wire 9 Mm (1kg/roll) 3 71 Unit Food Cart Made With Metal Framing, Aluminum Plain Sheet With Heavy Duty Side Wheel (l160cm X W90cm X H6ft Fully Customized Food Cart) 3 72 Set Food Keeper (6pcs Stainless Food Warmer (34x28x16cm) 1 73 Set French Curve, L-square, Hip Curve, Ruler Aluminium Set 4 74 Unit Garden Net (material: Nylon, Size: 9mx100m, Hole Size: 1.5cmx1.5cm 2 75 Unit Garden Net 200 Meter (material: Nylon, Size: 9mx100m, Hole Size: 1.5cmx1.5cm 1 76 Unit Gas Stove Deep Fryer (oil Frying All In-one Machine) Heating Method: Liquified Gas/gas Valve: Low Pressure Valve Iron Plate Size: 55*35 Overall Size: 84.5*48*30 Iron Plate Thickness: 8mm 1 77 Unit Gasoline Engine Power Sprayer Set (type: Single Cylinder, 4 Stroke, Air Cooling Dhv Displacement: 196cc Hp/rpm: 6.5hp/3,600rpm Bore, Stroke: 68*54, Starting System: Recoil Start Intake System And Exhaust System: Standard) Inclusion: 1 Engine Pulley, 1 Kawasaki Auto Pump, 1 Nozzle Long 1 Meter, 1 Power Spray Hose 10m, 1 Return Hose Power Spray, 1 Suction Hose Power Spray, 2 Belt Power Spray, 1 Wheel Pulley, 1 Base Included) 6 78 Unit Glass Cabinet Storage (w14” X H30” X L20”) 1 79 Unit Glass Food Display (w14” X H30” X L20”) 2 80 Unit Glass Food Display (w14” X H30” X L20”) 81 Pcs Goat 5 82 Unit Grinder 9556nb Model (continuous Rating Input 850w, Wheel Diameter 100mm, 220v~3.8a) 1 83 Unit Hair Straightener Professional Edition Electric Fast Heat Iron Ceramic Hair Iron (input: Ac220-240v, Power 50w) 4 84 Pc Hammer (16oz Large Or 12.5 With Rubber Handle And Nail Puller) 1 85 Unit Heavy Duty Barber Shop Trolley 5 Layers Salon Tools Haircut Accessories Holder Storage-movable 4 86 Unit Heavy Duty Coconut Presser 14t(hydraulic Jack-type Coconut Presser, 14pcsof Grated Coconuts Per Pressing, Driven By A 10-ton Capacity Hydraulic Jack, High-quality Stainless Plate And Tray With A Durable Steel Structure) 5 87 Unit Heavy Duty Foam Tank, Foam Wash Machine 21 Gal. 1 88 Unit Heavy Duty Hand Truck Double And Curved 150-300 Kg 2 89 Unit Heavy Duty Wet And Dry 1.5hp Coconut Grater With Stainless Blade And Basin (1.1k Watts, 1.5hp, High Torque, Stainless Star Blade, Stainless Basin, With Exhaust Fan On Motor, Dual Rotation: Clockwise Or Counter) With Sand 1 90 Unit Heavy Duty Wet And Dry 1.5hp Coconut Grater With Stainless Blade And Basin (1.1k Watts, 1.5hp, High Torque, Stainless Star Blade, Stainless Basin, With The Exhaust Fan On The Motor, Dual Rotation: Clockwise Or Counter) 6 91 Unit Heavy-duty Cast Iron Gas Stove/kalan; 3 Adjustable Gas Valve, 3 Burner Rings 6 92 Unit Heavy-duty Wet And Dry Grinding Machine (3hp) 1 93 Unit High Pressure Electric Airless Paint Spray Paint Machine With (nozzle Diameter: 3.15mm-0.2mm, Power: 1800w, Spray Distance: 50 Cm, Maximum Flow: 1.8l/min, Maximum Working Pressure:20mpa=3000psi, Plug Standard: Eu/us Plug) 5 94 Unit High Quality Cooler Box Polar Ice Box (52 Litters) 1 95 Unit Hog Wire 2 96 Unit Impcat Drill Motor Power 1/2hp (450w) 220v 1 97 Unit Impulse Heat Sealer Plastic Bag Film Sealing Machine 300mm (rated Voltage:110v/220v, Power: 200-350watts) 1 98 Set Industrial Sewing Machine High Speed With Stand And Table With Motor Servo 550v/250v (complete Set) 4 99 Unit Knapsack Electric Sprayer 2in1 Rechargeable Manual 16l (battery Capacity: 8ah, Voltage: Dc12v) 3 100 Set Knife (kitchen Knife Set Stand Knife Holder Stainless Steel Knife Set) 1 101 Unit Kulong Kulong Made With Solid Plain Bar 5/8, Flat Bar And Angle Bar With Heavy Duty Side Wheel (l160cm X W90cm X H6ft Fully Customized Kulong-kulong) 1 102 Unit Lawn Mower Grass Cutter 4 Stroke Grass Cutter (engine Output Power:1,500w, Displacement: 45cc, Engine Type: Air Cooled, 4 Stroke, Single Cylinder, Rated Outer Power: 0.7kw, 7500rpm/0.8kw 7,500rpm) 9 103 Unit Leather Gloves For Welding 12 104 Set Magnetic Screwdriver Set Professional Cushion Grip 5 Flat Head And 4 Philips Tips 2 105 Set Melamine Plate Set ,12 Pcs Plate, 12 Pcs Cups, 6 Pcs Bowl, 12 Pcs Spoon, 12 Pcs Fork 3 106 Set Melamine Plate Set ,12 Pcs Plate, 12 Pcs Cups, 6 Pcs Bowl, 12 Pcs Spoon, 12 Pcs Fork 2 107 Pcs Mirror 3ftx4ft 2 108 Pcs Mixing Bowl 24cm 2 109 Dozen Mugs 9oz (1dozen) 2 110 Unit Nutri-bullet Blender High Speed 600w 1 111 Unit Original Electric Wood Planer 800w (planning Depth: 3mm; 16000rpm 7 112 Unit Oven Two-tier Two-tray Power-off Oven Internal Dimension: 61.5x43x15cm Product Power: 6.4kw Product Size: 88x58x75cm 5 113 Pcs Piglets 20 114 Set Pizza Pan Set Of 6 Aluminum Materials:#1. 11.5x1 , #2. 10.5x1 , #3. 9.75x1 , #4. 8.75x1 , #5. 8x1 , #6. 7x1 1 115 Bale Plastic Cups 10 Oz (1bale) 3 116 Bale Plastic Cups 12 Oz (1bale) 3 117 Dozen Plates 21cm (1dozen) 2 118 Unit Plunge Router ½” W/ Variable Speed 2200w, 220v, Frequency 60 50hz Nut Size – ½” Capacity 12mm,9,000-22,000 Rpm 4 119 Unit Portable Tire Grilling Machine; Range Of Application: 8-19” Tire (center Hole To Edge, Tire Center Hole > 5cm) ; Packing Size: 95x21x21.2cm 3 120 Unit Power Craft 16mm Drill Press (pdp 1016c Model, Motor Power 1/2hp (450w) 220v 1 121 Unit Power Spray Pump Set With 1.5 Electric Motor And 100 Meters Pressure Hose 1 122 Unit Premium Car Tore Air Pressure Inflator Gauge W/ Indicator, 2-200psi 1 123 Set Professional Disassemble Tool Kit 6 In 1 Set ; Size 43*32*9mm; ¼ Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm; ½ Sockets: 10,11,12,13,14,15,16,17,18,19, 20, 21, 22, 23, 24, 27, 30, 32mm; Spark Plug Sleeve: 16,21mm; Dual Purpose Wrench: 8,9,10,11,12,13,14,15,16,17,18, 19mm 3 124 Unit Professional Hydraulic With Reclining Barber Chair Elite (hydraulic, Reclining: 6ft. Fixed Arms) 4 125 Unit Professional Led Hair Dryer With Temperature Display And Dual Heat Mode (2200w Power, 220-240volts 7 126 Unit Professional Table Saw Machine For Wood Bench Cutting Machine Circular Saw Cutter 1800w8-inch Extended Version (specs: 1800w Power, 220-240 Volts, 50hz Frequency, 2 M Power Cord) 45mm Minimum Cutting Height, 350mm Saw Blade To Backer, Saw Blade Diameter 210mm/200mm, Saw Blade Angle 0-45 Degrees Adjustable, Table Size L52” X W45-60cm Adjustable) Complete Set. 1 127 Unit Rotary Cultivator Scarifier Gasoline Micro Cultivator Mower Rotary Tiller For Farming (gasoline Selection:91 Or 95, Fuel Consumption: 480g/kw*h, Horse Power: 7.5 Hp, Engine 4-stroke Engine) Complete Set 1 128 Pc Round Stool Hydraulic Chair With Wheels Adjustable Size 4 129 Unit Sander Electric Polisher Orbital Sander Machine Power Tool (220 Volts, 200w Power, Rated Frequency 50hz, Plate Size 100x100mm, Size 100x100x125mm) 6 130 Unit Saw Shaft Spindle W/ Pillow Block Spb 3 Ply, 3 Pulley Diameter; 1 ¼ “ 1 131 Roll Sdr-11 Hdpe Black Pipe Garden Irrigation Hose 1” 200meters 1 132 Roll Sdr-11 Hdpe Black Pipe Water Line ½” 1 133 Unit Silyasi/kawali Big Size Makapal Aluminium Frying Pan(76*69cmx23cm) Extra Xl 2 134 Unit Square Tank 1000 Liter (dimension: H1.2mxw1mxl1.2m) 3 135 Set Stainless Steel Rectangular Food Warmer With Glass Lid Cover 6 Sets (34x28x16cm) 2 136 Unit Stainless Steel Thicker Mixing Bowl (40cm Thickened 40cm Width) 1 137 Unit Stainless Steel Welding Machine With One Mig Torch, 1kg; 0.8mm Flux Welding Wire Earth Clamp, Electrode Holder, 2mgas Tube 220v, Ocs: 60v, Mma:200a, Frequency: 20/60hz 8 138 Unit Steamer 3 Layer 9 139 Set Stew Pots Stainless Steel Pot H-05 Stainless Cookware 1 Set (5pcs) 1 140 Pcs Stool Chair With Backrest Chair For Beauty Salon (can Carry 90kg, Adjustable And 360 Degrees Rotation 3 141 Roll Submersible Discharge Duct Flat Hose 2” 2 142 Unit Submersible Water Pump Hose Discharge Duct Flat Blue Hose Pvc 3” (300 Meters) 1 143 Sack Sugar 1 Sack 1 144 Unit Tarpaulin (2x3 Ft) 90 145 Unit Thick “”silyasi/kawali” Big Size, Aluminum Frying Pan(76*69cmx23cm) Extra Xl 6 146 Unit Tire Bead Breaks Manual Tire Repair Stripper, Diameter: 15”-20” 1 147 Pcs Tire Patch Roller 6/12mm 6 148 Unit Tire Patch Roller; Roller Width: 20mm; Roller Diameter: 36mm 1 149 Box Tire Patch Vulcanizing Patel 40mm (150pcs/ Box) 3 150 Unit Tire Pressure Gauge, 200psi 2 151 Unit Tire Vulcanizing Machine; Voltage:220; Input Power: 500w; Temperature: 145 165c 3 152 Unit Trolley Gasoline Engine Sprayer Tf-22a/168f-120 1 153 Set T-wrench, T-handle Sockets; 5 Keys Set Content: 8 - 10 - 12 - 13 - 14mm 1 154 Unit Upright Chiller (7 Cu. Ft. Chiller) 1 155 Unit Vulcanizing Machine 220v W/ Iron Tire Remover 1 156 Unit Water Dispenser (hot And Cold Automatic W/ Pump) 2 157 Pc Water Jug Cooler Insulated Bucket 21l 1 158 Unit Welding Helmet-auto Darkening Helmet/mask For Welding Flames Viewing Window 92.5x42.5mm Lens Dimension, 110x90x9mm, Shade: 13,12,11,10,9 6 159 Unit White Polyester Sewing Thread 3000m/cone 80 160 Unit White Sugar 1 End-user: Dole Beneficiaries