Waterproofing Tenders

Description: CATEGORY: PAPER WRAPPING BROWN UNGLAZED 445 MM X 5 , PAPER WRAPPING BROWN UNGLAZED 560 MM X 7 , PAPER WRAPPING BROWN UNGLAZED 735 MM X 1 , PAPER WRAPPING WATERPROOF PLAIN 1189 MM , PAPER WRAPPING WAXED 841 MM X 100 MTR , POLYTHENE FILM point 2 MM THICK X 1 MTR WIDTH , POLYTHENE FILM point 25 MM THICK X 1 M WIDTH , DUSTER DOSUTI 90 CM X 50 CM , WICK FLAT 16MM , BATTERY DRY 4 point 5V NO2 , BTY DRY 1 point 5V NO3 METAL CLAD , BTY DRY 1 point 5V NO6 METAL CLAD , BLUE LAUNDRY , NAILS STEEL WIRE ROUND 70 MM X 3 point 15 MM , WIRE STEEL MILD BRIGHT 2 point 50MM , WIRE STEEL MILD ANNEALED 5 MM , PPER WRAPPING WATER PROOF PLAIN 841MM , Swing COTTON THREAD 590 DTEX X3 WHITE 1000M , NEEDLE DRAINING TAILOR 47 MM , POLYTHENE FILM point 18 MM THICK X 1 M WIDTH , Swing COTTON THREAD 590 DTEX X 3 WHITE 500M

Description: Waterproofing renovation of roof loggias, Sickstr. 72/74 and 76/78, 70190 Stuttgart - Voek 387a-24

Description: Cypress Cove Elementary, Exterior Cleaning, Painting And Masonry Waterproofing, Phase Ii, Stpsb Project No. R0133

Details: Restoration and Modification of the Existing Wave Channel of the Legi. This Mainly Has Waterproofing Issues That Constrain the Implementation of the Desired Manipulations. Following Certain Modifications Made, the Channel Floor Is No Longer Flat, Which Makes Some Experiments Impossible to Implement. In Operation, the Average Water Depth Can Be Prescribed at 70 Cm, the Maximum Level in the Case of Wave Interactions Can Locally Reach 120 Cm.

Description: Basement waterproofing and basement renovation Autobahnsiedlung 1-8, 06188 Landsberg-Peißen; Garden and landscaping work - Voek 442a-24

Description: CATEGORY: Ethylene Propylene Diene Monomer Waterproofing Membrane Synthetic single ply preformed waterproofing membrane , Hydrophobic Poreblocking Ingredient for wall foundation , Ethylene Propylene Diene Monomer Waterproofing Membrane , Hydrophobic Poreblocking Ingredient , Ethylene Propylene Diene Monomer Waterproofing Membrane Synthetic single ply preformed waterproofing membrane in black colour

Details: The Subject of This Public Contract Is the Construction Modification, Extension and Extension of the Building Located on Plot No. St. 56, K. Ú. Korotice, Which Will Serve for the Purposes of a Children's Group with Year-Round Operation. This Is a Complete Reconstruction of the Existing Building, Including the Construction of a New Roof, All New Installations, All New Hole Fillings, Construction of New Waterproofing and Repair of the Perimeter Shell with Insulation, Reinforcement of the Foundations Under the Existing Load-bearing Walls of the Building and Modification of the Building's Statics. This Is a Detached Single-Storey Building With an Attic, Which Is Partially Basemented. In the Main Part of the Building, a Playroom, a Bedroom and a Study for Children Will Be Built on the 1st Floor, as Well as a Dining Room, a Food Preparation Room, a Cloakroom and Social Facilities. The building does not include its own kitchen, but catering is planned. Facilities for staff and a conference room for meetings and meetings are planned for the 2nd floor. The basement of the building will be used as a technical room. New handling areas will be constructed to the extent necessary for the construction of access roads and parking lots. New fencing will be built around the land. The work also includes the implementation of survey and design work for production documentation, geodetic surveying of the actual construction in the same format and photo documentation of the construction process. As part of the Performance, the Supplier shall obtain and ensure all necessary decisions, contracts, fees, measures that are necessary to secure and implement the construction and its commissioning, and shall also ensure all necessary documents, certificates, attestations, tests, inspections, etc., necessary to commission the construction in accordance with the relevant legal provisions.

Description: Basement waterproofing and basement renovation Autobahnsiedlung 1-8, 06188 Landsberg-Peißen; Garden and landscaping work - Voek 442a-24

Description: Waterproofing Treatment At The Expansion Joints Of Eeti Hostel Building At Aa Iii B/13, New Town

Details: Simulator, Projectile, Ground Burst: Mini Blast, Xm183 simulator, Explosive Detonation: High Order, Xm184 simulator, Missile: Incoming Rocket Propelled Grenade, Xm185 simulator, Small Arms Fire, Tracer Fire-back, Xm186 introduction the Army Contracting Command – New Jersey (acc-nj) Is Using This Sources Sought Announcement To Provide Information To Industry About The Family Of Battlefield Effects Simulators. The Purpose Of Providing This Information Is To Conduct Ongoing Market Research And To Identify Interested Sources Capable Of Manufacturing And Delivering The Xm183, Xm184, Xm185, And Xm186 Pyrotechnic Simulators. the Results Of This Market Research Will Be Used To Help Determine The Method Of Procurement, If A Requirement Materializes. Based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Procured (in Full Or In Part) Via A Small Business Set-aside (sbsa) Or Via Full And Open Competition. Multiple Awards May Be Made. All Small Business Set-aside Categories Will Be Considered. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Submissions. all Contractors Interested In This Potential Future Solicitation Must Be Registered In The System For Award Management (sam). disclaimer this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal (rfp) To Be Submitted. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. required Capabilities 1. Xm183, Nsn: 1370-01-708-4879, Dodic: La97 simulator, Projectile, Ground Burst: Mini Blast, Xm183 the La97 Xm183 Mini Blast Is Used To Produce Simulated Battlefield Effects During Unit Training Missions. This Cartridge Is Designed For Use With All Battlefield Effects Simulator (bes) Systems (omega 36 And 60, Bes Ii 36 And 60 Launcher Systems) Utilizing The Auxiliary Cartridge Or Another 12-volt Source. The Cartridges Consist Of A Waterproof Carboard Case, Electric Match, And Flash Charge. The La97 Cartridge Is Specifically Designed To Simulate A Ground Burst Or The Secondary Effect From A Rocket Propelled Grenade (rpg). This Is Accomplished By Producing A Flash/smoke/report Upon Ignition. The Audible Effect Is Greater Than 140 Decibels (db) At 20 Meters. 2. Xm184, Nsn: Tbd, Dodic: Lz08 simulator, Explosive Detonation: High Order, Xm184 the Xm184 High Order Blast Effect (hiobe) Is Used To Produce Simulated Battlefield Effects During Unit Training Missions. This Cartridge Is Designed For Use With All Battlefield Effects Simulator (bes) Systems (omega 36 And 60, Bes Ii 36 And 60 Launcher Systems) Utilizing The Auxiliary Cartridge Or Another 12-volt Source. The Xm184 Is Specifically Designed To Simulate The Effect Large Explosive Or Vehicle Born Improvised Explosive Device (vbied). This Is Accomplished By The Simulator Creating A Large Orange Fireball Effect. The Xm184 Is Free Of Burning Debris After Firing And Safe To Use And Set Up. For Example, The Xm184 Can Be Fired In The Back Of A Pickup Truck Without Damaging The Vehicle. 3. Xm185, Nsn: 1370-01-719-1296, Dodic La99 simulator, Missile: Incoming Rocket Propelled Grenade, Xm185 the La99 Xm185 Rpg On A Wire Is Used To Produce Simulated Battlefield Effects During Unit Training Missions. This Cartridge Is Designed For Use With All Battlefield Effects Simulator (bes) Systems (omega 36 And 60, Bes Ii 36 And 60 Launcher Systems) Utilizing The Auxiliary Cartridge Or Another 12-volt Source. The Simulator Consists Of A Foam Tipped Carboard Case Tube, Rocket Motor, Electric Match, Line, And Tensioner. The Xm185 Is Specifically Designed To Simulate The Effect From A Rocket Propelled Grenade (rpg). This Is Accomplished By The Simulator Propelling Itself Down The Line Producing A Smoke Trail And The Audible Effect Of An Rpg Attack. 4. Xm186, Nsn: 1370-01-719-6338, Dodic Lb01 simulator, Small Arms Fire, Tracer Fire-back, Xm186 the Lb01 Xm186 Tracer Fire Back Is Used To Produce Simulated Battlefield Effects During Unit Training Missions. This Cartridge Is Designed For Use With All Battlefield Effects Simulator (bes) Systems (omega 36 And 60, Bes Ii 36 And 60 Launcher Systems) Utilizing The Auxiliary Cartridge Or Another 12-volt Source. The Simulator Consists Of 60 Tubes With A Pellet In Each, Four Electric Matches, And Base Plate. The Xm186 Is Specifically Designed To Simulate The Effect From A Hostile Small Arms And Crew Served Weapons Fire. This Is Accomplished By The Simulator Propelling A Self-consuming Pellet To Simulate A Tracer Round. The Xm186 Has Four Salvos Of 15 Shots And Is Capable Of Operation On All-weather Situations Present On The Training Ranges. interested Companies Should Respond By Providing The Government The Following Information: A Brief Summary Of The Company's Capabilities (a Description Of Facilities, Personnel, And Past Manufacturing Experience As It Relates To The Above Criteria) And Availability. Interested Companies Should Provide Minimum And Maximum Monthly Production Capability (and If Manufacturing Resources Are Shared With Other Item/production Lines). Additionally, It Is Requested That Respondents Provide The Minimum Procurement Quantity (mpq) Required For Economical Production. A Respondent To This Survey Should Be Able To Show Adequate Technical And Manufacturing Capability And Satisfactory Past Performance In The Explosives Processing Industry. A Respondent To This Market Survey/sources Sought Must Have Available A Majority Of The Skills And Facilities That Are Required To Manufacture This Item. If A Respondent Does Not Have The Adequate Resources (technical, Manufacturing, Personnel, Etc.) Available, The Respondent Must Be Able To Describe And Demonstrate His Or Her Ability To Obtain These Resources In A Timely Fashion. If A Respondent Chooses To Utilize The Services Of Sub-tier Vendors Or Subcontractors, Those Vendors Or Subcontractors Must Also Meet These Criteria. All Contractors Interested In This Potential Future Solicitation Must Be Registered In The System For Award Management (sam) Database. performance Specifications any Interested Parties Who Wish To Request A Copy Of The Specs Must Provide A Signed And Approved Dd Form 2345 Military Critical Technologies Data Agreement. If An Interested Party Is Not Based In The U.s., A Copy Of Their Approved Export License Issued By The U.s. Department Of State Must Be Provided As Well. After Receipt Of These Documents, The Contract Specialist Will Provide An Amsta-ar Form 1350 Technical Data Questionnaire And A Completed And Signed Non-disclosure / Non-use Agreement For Completion. When All Completed Documents Are Received By The Contract Specialist, The Tdp Will Be Sent. Interested Parties Must E-mail All Signed And Approved Forms To: united States Army Contracting Command - New Jersey acc-nj-et bldg. 9 attn: Ryan Fiorellini picatinny Arsenal, Picatinny, Nj 07806-5000 ryan.n.fiorellini.civ@army.mil destruction Notice Export-controlled Technical Data: For Classified Documents, Follow The Procedures In Dod 5220.22-m, Industrial Security Manual, Section 11-19 Or Dod 5200.1-r, Information Security Program Regulation, Chapter Ix. For Unclassified, Limited Documents, Destroy By Any Method That Will Prevent Disclosure Of Contents Or Reconstruction Of The Document. eligibility the Naics Code For This Contract Is 325920 With A Business Size Standard Of 750 Employees. Respondents Should Indicate Their Business Size In Their Response. submission Details interested Businesses Should Submit A Brief Capabilities Statement Package (no More Than Ten 8.5 X 11 Inch Pages, Font No Smaller Than 10 Point) Demonstrating Ability To Provide The Products/systems Listed In This Technical Description. Documentation Should Be In Bullet Format. No Phone Or Email Solicitations With Regards To The Status Of The Rfp Will Be Accepted Prior To Its Release. your Response To This Sources Sought, Including Any Capabilities Statement, Shall Be Electronically Submitted To The Contract Specialist, Ryan Fiorellini, And Contracting Officer, Steven S. Ghazi, In Either Microsoft Word Or Portable Document Format (pdf), Via Email Ryan.n.fiorellini.civ@army.mil And Steven.s.ghazi.civ@army.mil By The Due Date Of This Market Survey No Later Than 12:00 Pm Est. The Information Must Be Submitted 30 Calendar Days From The Date Of This Publication. If A Formal Solicitation Is Generated At A Later Date, A Separate Solicitation Notice Will Be Published. No Award Will Be Made As A Result Of This Market Survey. All Information Is To Be Submitted At No Cost Or Obligation To The Government. The Information Provided Will Not Be Returned. Telephone Inquiries Will Not Be Accepted. The Government Will Accept Written Questions Via E-mail Only. All Responses Shall Reference This Synopsis Number In Subject Line Of E-mail And On All Enclosed Documents. Information And Materials Submitted In Response To This Request Will Not Be Returned. Do Not Submit Classified Material.