Waterproofing Tenders

Description: Roof Waterproofing Repair and Creation of Peripheral Guardrails for the Esquilin Residence

Details: Description Republic Of The Philippine Province Of Negros Occidental Municipality Of Ilog Invitation To Bid For Sale Amount:php 1000 Purchase Of Materials For The Installation/construction Of Solar Street Lights, Sitio Bucay, Barangay Ii-poblacion, Ilog, Negros Occidental 1. Solar Panel Max Power 130watts Service Warranty 5 Years Monocrystalline Silicon 18v / 130watts Dimensions (mm) Not Less Than 670x603x25 2. Battery Deep Cycle And Maintenance Free Grade A Lithium Ion Battery (not Less Than 3.2v 130ah) 3. Light Source Max Power 150watts Light Source 180pcs*1w 3030 High Efficacy Led Service Warranty Not Less Than 3 Years 4. Beam Angle 135/65° For Professional Street Light Distribution 5. Lighting Time Should Not Be Less Than 2 To 3 Days 6. Working Temperature Range (°c) 'min. Range (0°c To + 60°c) 10-95% 7. Color Temperature Range (k) Daylight 6,000k - 6,500k 8. Charge Controller Auto Day/night Recognition & Motion Sensor 9. Ip Range Ip 65 Or Waterproof And Dust Resistant 10. Mounting Height Range 7-9 Meters 11. Main Material Aluminum Alloy Housing With Durable, Fireproof, Rustproof And Explosion Proof Performance. 12. Mounting Poles, Brackets And Accessories 150mm Diameter Base X 6m High Tapered G.i. Pipe (powder Coated), 0.30m X 0.30m X 12mm Thick Steel Base Plate Bolted With Four - 3/4" X 4 Anchored Bolts With Steel Braces 12. Arm 2" Diameter X 2.0m Length Pipe Powder Coated Steel Arm With Complete Connectors And Other Accessories 14. Pedestal Concrete Foundation 0.25mt X 1.0ml X 1.0mw Concrete Foundation With 8-12mmø Mat Bars Spaced At 150mm O.c. Both Ways Pedestal Column 0.45m X 0.45m Concrete And 1.0m High Above Natural Ground Level Reinforced With 4-12mmø Main Bars Tied With 10mmø Rsb Spaced At 150mm O.c. >>> Nothing Follows<<<

Details: Description Republic Of The Philippines Province Of Negros Occidental Municipality Of Ilog Invitation To Bid For Sale Amountphp 1,000 Purchase Of Materials For The Installation/construction Of Solar Street Lights, Puroks Cory, Paglaum And Masagana, Barangay Tabu, Ilog, Negros Occidental 1. Solar Panel Max Power 130watts Service Warranty 5 Years Monocrystalline Silicon 18v / 130watts Dimensions (mm) Not Less Than 670x603x25 2. Battery Deep Cycle And Maintenance Free Grade A Lithium Ion Battery (not Less Than 3.2v 130ah) 3. Light Source Max Power 150watts Light Source 180pcs*1w 3030 High Efficacy Led Service Warranty Not Less Than 3 Years 4. Beam Angle 135/65° For Professional Street Light Distribution 5. Lighting Time Should Not Be Less Than 2 To 3 Days 6. Working Temperature Range (°c) 'min. Range (0°c To + 60°c) 10-95% 7. Color Temperature Range (k) Daylight 6,000k - 6,500k 8. Charge Controller Auto Day/night Recognition & Motion Sensor 9. Ip Range Ip 65 Or Waterproof And Dust Resistant 10. Mounting Height Range 7-9 Meters 11. Main Material Aluminum Alloy Housing With Durable, Fireproof, Rustproof And Explosion Proof Performance. 12. Mounting Poles, Brackets And Accessories 150mm Diameter Base X 6m High Tapered G.i. Pipe (powder Coated), 0.30m X 0.30m X 12mm Thick Steel Base Plate Bolted With Four - 3/4" X 4 Anchored Bolts With Steel Braces 13. Arm 2" Diameter X 2.0m Length Pipe Powder Coated Steel Arm With Complete Connectors And Other Accessories 14. Pedestal Concrete Foundation 0.25mt X 1.0ml X 1.0mw Concrete Foundation With 8-12mmø Mat Bars Spaced At 150mm O.c. Both Ways Pedestal Column 0.45m X 0.45m Concrete And 1.0m High Above Natural Ground Level Reinforced With 4-12mmø Main Bars Tied With 10mmø Rsb Spaced At 150mm O.c. >>> Nothing Follows<<<

Details: Description Itb No. 003.25- 18 Sets Air Conditioning Units - 5b 1 Description Of Function 1.1 . Air Conditioning System/unit- Is An Inverter Type Of Air Conditioner That Use To Cool Down The Temperature In An Inside Space By Removing The Existing Heat And Moisture From The Room. Essentially They Work By Taking Warm Air Into A System And Dispensing Cold Air. Inverter Air Conditioner Have Less Power Loss That Can Save Energy By Changing Compressor Motor Speed Without Turning The Motor On And Off. 2 Operational Requirements 2.1 . System Complete With All Accessories As Specified In The Technical Specifications Below. 3 Technical Specifications Item No. Area Room Capacity Type Voltage Hz Phase Controller Feature 1 508 2.5 Inverter-wall Mounted 220-230 60 1 Wireless Voltage Protection, High Density Dust Filter With Antimicrobial Properties With Turbo Mode 2 509 2.5 Inverter-wall Mounted " " " " " 3 510 2.5 Inverter-wall Mounted " " " " " 4 511 2.5 Inverter-wall Mounted " " " " " 5 512 2.5 Inverter-wall Mounted " " " " " 6 514 2.5 Inverter-wall Mounted " " " " " 7 515 2.5 Inverter-wall Mounted " " " " " 8 516 2.5 Inverter-wall Mounted " " " " " 9 517 2 Inverter-wall Mounted " " " " " 10 517 1.5 Inverter-wall Mounted " " " " " 11 518 2 Inverter-wall Mounted " " " " " 12 518 1.5 Inverter-wall Mounted " " " " " 13 519 2.5 Inverter-wall Mounted " " " " " 14 520 2.5 Inverter-wall Mounted " " " " " 15 521 2.5 Inverter-wall Mounted " " " " " 16 522 2.5 Inverter-wall Mounted " " " " " 17 Hallway 4 Inverter-ceiling Cassette " " " " " 18 Hallway 4 Inverter-ceiling Cassette " " " " " 4 Scope Of Works 4.1. The Contractor Shall Coordinate To The Phc-emd Engineers To Conduct Actual Ocular Inspection For The Ideal Location Of All Air Conditioner Units. 4.2. The Contractor Shall Submit Detailed And Accurate Shop Drawings Prepared In Accordance With Mechanical And Electrical Code Of The Philippines And For Approval Of Phc-emd Prior To Installation. 4.3. The Contractor Shall Submit Pert/cpm To Engineering And Maintenance Division (emd) For Monitoring And Daily Works. 4.4. The Contractor Shall Apply And Secure Necessary Work Permit And Hot Work Permit Prior To Commencement Of Work. 4.5. The Contractor Shall Provide Heavy Duty Inverter Type Air Conditioner 4.6. The Contractor Shall Submit Heavy Duty Materials For Inspection And Approval By Phc-emd Prior To Installation. 4.7. The Contractor Shall Comply To The Installation Standards And Correct Specification Of Materials Prescribed By The Manufacturer In Accordance With Electrical And Mechanical Code Of The Philippines. 4.8. The Contractor Shall Perform And Provide Necessary Materials For Lay-out Of Power Supply From Electrical Room To Secondary Breaker (stainless Steel) Of Condensing Units. 4.9. The Contractor Shall Observe And Comply The Following: 4.9.1. Rubber Insulation For Copper And Drain Pipe Lines- 1” Thickness 4.9.2. Use Liquid Tight Flexible Hose Or Pvc Pipe Orange For Condenser Unit 4.9.3. Use Stainless Steel Enclosure For Secondary Breakers 4.9.4. Provide Proper Water Proof Tagging For Indoor And Outdoor Units 4.9.5 Drain Pipe Line- Indoor Unit-1 Inch Diameter (minimum); Main Line 2”diameter (minimum) 4.9.6 Pressure/leak Test Of All Refrigerant Lines- 8 Hrs At 300 Psi Witness By Emd Representative 4.9.7 Flow Test Of Drain Lines Witness By Emd Representative 4.9.8 Perform All Requirements Stated In Start-up Sheet Of Air Conditioner Manufacturer And Shall Submit Copy To Emd 4.9.9. Conduct Waterproofing Of All Pipe Sleeve 4.10. The Contractor Shall Dismantle Existing Ac Units And Any Obstruction Prior To Air Conditioner Installation. Contractor Shall Conduct Water Proofing On Concrete Slab (copper Lines Stub Out). 4.11. The Contractor Shall Have A Certification From The Manufacturer That It Is Authorized To Perform The Distribution, Installation, And Maintenance Of The Inverter Type Air Conditioner. 4.12. The Contractor Shall Have A Certificate Of Distributorship Of The Inverter Type Air Conditioner. 4.13. The Contractor Shall Submit As-built Mechanical Plan Signed And Sealed By Professional Mechanical Engineer (pme) During The Turn-over Of The Project. 4.14. The Contractor Shall Provide Five (5) Years Warranty For The Compressor, Two (2) Years For The Inverter Parts, And One (1) Year For Workmanship. 4.15. The Contractor Shall Conduct Quarterly Preventive Maintenance For One (1) Year Which Include Cleaning Without Additional Cost To Phc 4.16. Testing And Commissioning With The Presence Of Phc-emd Engineers. Itb No. 003.25- 18 Sets Air Conditioning Units - 5c 1 Description Of Function 1.1 Air Conditioning System/unit- Is An Inverter Type Of Air Conditioner That Use To Cool Down The Temperature In An Inside Space By Removing The Existing Heat And Moisture From The Room. Essentially They Work By Taking Warm Air Into A System And Dispensing Cold Air. Inverter Air Conditioner Have Less Power Loss That Can Save Energy By Changing Compressor Motor Speed Without Turning The Motor On And Off. 2 Operational Requirements 2.1 . System Complete With All Accessories As Specified In The Technical Specifications Below. 3 Technical Specifications Item No. Area Room Capacity Type Voltage Hz Phase Controller Feature 1 508 2.5 Inverter-wall Mounted 220-230 60 1 Wireless Voltage Protection, High Density Dust Filter With Antimicrobial Properties With Turbo Mode 2 509 2.5 Inverter-wall Mounted " " " " " 3 510 2.5 Inverter-wall Mounted " " " " " 4 511 2.5 Inverter-wall Mounted " " " " " 5 512 2.5 Inverter-wall Mounted " " " " " 6 514 2.5 Inverter-wall Mounted " " " " " 7 515 2.5 Inverter-wall Mounted " " " " " 8 516 2.5 Inverter-wall Mounted " " " " " 9 517 2 Inverter-wall Mounted " " " " " 10 517 1.5 Inverter-wall Mounted " " " " " 11 518 2 Inverter-wall Mounted " " " " " 12 518 1.5 Inverter-wall Mounted " " " " " 13 519 2.5 Inverter-wall Mounted " " " " " 14 520 2.5 Inverter-wall Mounted " " " " " 15 521 2.5 Inverter-wall Mounted " " " " " 16 522 2.5 Inverter-wall Mounted " " " " " 17 Hallway 4 Inverter-ceiling Cassette " " " " " 18 Hallway 4 Inverter-ceiling Cassette " " " " " 4 Scope Of Works 4.1. The Contractor Shall Coordinate To The Phc-emd Engineers To Conduct Actual Ocular Inspection For The Ideal Location Of All Air Conditioner Units. 4.2. The Contractor Shall Submit Detailed And Accurate Shop Drawings Prepared In Accordance With Mechanical And Electrical Code Of The Philippines And For Approval Of Phc-emd Prior To Installation. 4.3. The Contractor Shall Submit Pert/cpm To Engineering And Maintenance Division (emd) For Monitoring And Daily Works. 4.4. The Contractor Shall Apply And Secure Necessary Work Permit And Hot Work Permit Prior To Commencement Of Work. 4.5. The Contractor Shall Provide Heavy Duty Inverter Type Air Conditioner 4.6. The Contractor Shall Submit Heavy Duty Materials For Inspection And Approval By Phc-emd Prior To Installation. 4.7. The Contractor Shall Comply To The Installation Standards And Correct Specification Of Materials Prescribed By The Manufacturer In Accordance With Electrical And Mechanical Code Of The Philippines. 4.8. The Contractor Shall Perform And Provide Necessary Materials For Lay-out Of Power Supply From Electrical Room To Secondary Breaker (stainless Steel) Of Condensing Units. 4.9. The Contractor Shall Observe And Comply The Following: 4.9.1. Rubber Insulation For Copper And Drain Pipe Lines- 1” Thickness 4.9.2. Use Liquid Tight Flexible Hose Or Pvc Pipe Orange For Condenser Unit 4.9.3. Use Stainless Steel Enclosure For Secondary Breakers 4.9.4. Provide Proper Water Proof Tagging For Indoor And Outdoor Units 4.9.5 Drain Pipe Line- Indoor Unit-1 Inch Diameter (minimum); Main Line 2”diameter (minimum) 4.9.6 Pressure/leak Test Of All Refrigerant Lines- 8 Hrs At 300 Psi Witness By Emd Representative 4.9.7 Flow Test Of Drain Lines Witness By Emd Representative 4.9.8 Perform All Requirements Stated In Start-up Sheet Of Air Conditioner Manufacturer And Shall Submit Copy To Emd 4.9.9. Conduct Waterproofing Of All Pipe Sleeve 4.10. The Contractor Shall Dismantle Existing Ac Units And Any Obstruction Prior To Air Conditioner Installation. Contractor Shall Conduct Water Proofing On Concrete Slab (copper Lines Stub Out). 4.11. The Contractor Shall Have A Certification From The Manufacturer That It Is Authorized To Perform The Distribution, Installation, And Maintenance Of The Inverter Type Air Conditioner. 4.12. The Contractor Shall Have A Certificate Of Distributorship Of The Inverter Type Air Conditioner. 4.13. The Contractor Shall Submit As-built Mechanical Plan Signed And Sealed By Professional Mechanical Engineer (pme) During The Turn-over Of The Project. 4.14. The Contractor Shall Provide Five (5) Years Warranty For The Compressor, Two (2) Years For The Inverter Parts, And One (1) Year For Workmanship. 4.15. The Contractor Shall Conduct Quarterly Preventive Maintenance For One (1) Year Which Include Cleaning Without Additional Cost To Phc 4.16. Testing And Commissioning With The Presence Of Phc-emd Engineers.

Description: Sbildpune2025001 : Tender For Waterproofing Of Terrace And Bathrooms And Renovation Of Canteen Staff Quarters And Other Allied Works

Description: CATEGORY: PAPER WRAPPING BROWN UNGLAZED 445 MM X 5 , PAPER WRAPPING BROWN UNGLAZED 560 MM X 7 , PAPER WRAPPING BROWN UNGLAZED 735 MM X 1 , PAPER WRAPPING WATERPROOF PLAIN 1189 MM , PAPER WRAPPING WAXED 841 MM X 100 MTR , POLYTHENE FILM point 2 MM THICK X 1 MTR WIDTH , POLYTHENE FILM point 25 MM THICK X 1 M WIDTH , DUSTER DOSUTI 90 CM X 50 CM , WICK FLAT 16MM , BATTERY DRY 4 point 5V NO2 , BTY DRY 1 point 5V NO3 METAL CLAD , BTY DRY 1 point 5V NO6 METAL CLAD , BLUE LAUNDRY , NAILS STEEL WIRE ROUND 70 MM X 3 point 15 MM , WIRE STEEL MILD BRIGHT 2 point 50MM , WIRE STEEL MILD ANNEALED 5 MM , PPER WRAPPING WATER PROOF PLAIN 841MM , Swing COTTON THREAD 590 DTEX X3 WHITE 1000M , NEEDLE DRAINING TAILOR 47 MM , POLYTHENE FILM point 18 MM THICK X 1 M WIDTH , Swing COTTON THREAD 590 DTEX X 3 WHITE 500M

Details: Description Republic Of The Philippines Province Of Negros Occidental Municipality Of Ilog Invitation To Bid For Sale Amount:php 1,000 Purchase Of Materials For The Installation/construction Of Solar Street Lights, Sitio Busay, Barangay Galicia, Ilog, Negros Occidental 1. Solar Panel Max Power 130watts Service Warranty 5 Years Monocrystalline Silicon 18v / 130watts Dimensions (mm) Not Less Than 670x603x25 2. Battery Deep Cycle And Maintenance Free Grade A Lithium Ion Battery (not Less Than 3.2v 130ah) 3. Light Source Max Power 150watts Light Source 180pcs*1w 3030 High Efficacy Led Service Warranty Not Less Than 3 Years 4. Beam Angle 135/65° For Professional Street Light Distribution 5. Lighting Time Should Not Be Less Than 2 To 3 Days 6. Working Temperature Range (°c) 'min. Range (0°c To + 60°c) 10-95% 7. Color Temperature Range (k) Daylight 6,000k - 6,500k 8. Charge Controller Auto Day/night Recognition & Motion Sensor 9. Ip Range Ip 65 Or Waterproof And Dust Resistant 10. Mounting Height Range 7-9 Meters 11. Main Material Aluminum Alloy Housing With Durable, Fireproof, Rustproof And Explosion Proof Performance. 12. Mounting Poles, Brackets And Accessories 150mm Diameter Base X 6m High Tapered G.i. Pipe (powder Coated), 0.30m X 0.30m X 12mm Thick Steel Base Plate Bolted With Four - 3/4" X 4 Anchored Bolts With Steel Braces 12. Arm 2" Diameter X 2.0m Length Pipe Powder Coated Steel Arm With Complete Connectors And Other Accessories 14. Pedestal Concrete Foundation 0.25mt X 1.0ml X 1.0mw Concrete Foundation With 8-12mmø Mat Bars Spaced At 150mm O.c. Both Ways Pedestal Column 0.45m X 0.45m Concrete And 1.0m High Above Natural Ground Level Reinforced With 4-12mmø Main Bars Tied With 10mmø Rsb Spaced At 150mm O.c. >>> Nothing Follows<<<

Details: Description Republic Of The Philippines Province Of Negros Occidental Municipality Of Ilog Invitation To Bid For Sale Amount:php 5,000 Purchase Of Materials For The Installation/construction Of Solar Street Lights, Sitio San Ramon,barangay Manalad, Ilog, Negros Occidental 1. Solar Panel Max Power 130watts Service Warranty 5 Years Monocrystalline Silicon 18v / 130watts Dimensions (mm) Not Less Than 670x603x25 2. Battery Deep Cycle And Maintenance Free Grade A Lithium Ion Battery (not Less Than 3.2v 130ah) 3. Light Source Max Power 150watts Light Source 180pcs*1w 3030 High Efficacy Led Service Warranty Not Less Than 3 Years 4. Beam Angle 135/65° For Professional Street Light Distribution 5. Lighting Time Should Not Be Less Than 2 To 3 Days 6. Working Temperature Range (°c) 'min. Range (0°c To + 60°c) 10-95% 7. Color Temperature Range (k) Daylight 6,000k - 6,500k 8. Charge Controller Auto Day/night Recognition & Motion Sensor 9. Ip Range Ip 65 Or Waterproof And Dust Resistant 10. Mounting Height Range 7-9 Meters 11. Main Material Aluminum Alloy Housing With Durable, Fireproof, Rustproof And Explosion Proof Performance. 12. Mounting Poles, Brackets And Accessories 150mm Diameter Base X 6m High Tapered G.i. Pipe (powder Coated), 0.30m X 0.30m X 12mm Thick Steel Base Plate Bolted With Four - 3/4" X 4 Anchored Bolts With Steel Braces 12. Arm 2" Diameter X 2.0m Length Pipe Powder Coated Steel Arm With Complete Connectors And Other Accessories 14. Pedestal Concrete Foundation 0.25mt X 1.0ml X 1.0mw Concrete Foundation With 8-12mmø Mat Bars Spaced At 150mm O.c. Both Ways Pedestal Column 0.45m X 0.45m Concrete And 1.0m High Above Natural Ground Level Reinforced With 4-12mmø Main Bars Tied With 10mmø Rsb Spaced At 150mm O.c. >>> Nothing Follows<<<

Description: Waterproofing renovation of roof loggias, Sickstr. 72/74 and 76/78, 70190 Stuttgart - Voek 387a-24

Details: Description Invitation To Bid For 25ei0145 - Construction Of Multi-purpose Building At Dpwh Compound, San Mariano, Roxas, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Gaa 2025 Intends To Apply The Sum Of Php 33,418,440.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building At Dpwh Compound, San Mariano, Roxas, Oriental Mindoro/25ei0145. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building At Dpwh Compound, San Mariano, Roxas, Oriental Mindoro Contract Id : 25ei0145 Location : Roxas, Oriental Mindoro Scope Of Works : Construction Of Multi-purpose Building At Dpwh Compound, San Mariano, Roxas, Oriental Mindoro. This Includes Earthworks, Reinforced Concrete Works And Finishing And Other Civil Works Such As Soil Poisoning, Installation And Construction Of Storm Drainage And Sewerage System, Installation Of Plumbing Fixtures At Ground Floor And Mezzanine, Installation Of Ceiling At Ground Floor, Mezzanine, And Multi-purpose Hall, Installation Of Doors And Windows, Waterproofing, Installation Of Floor And Wall Tiles At Ground Floor, Plastering & Masonry Painting At Ground Floor & Multi-purpose Hall, Painting Of Ceiling And Wood Doors, Installation Of Reflective, Insulation, Roofing Works, Installation Of Ramp Railings And Glass Railings. Moreover, This Includes Electrical Works And Provision Of Fire Extinguisher At Ground Floor. Approved Budget For The Contract : Php 33,418,440.00 Contract Duration : 250 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 22, 2025 – February 11, 2025 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 20,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On January 30, 2025 At 10:00 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before February 11, 2025 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On February 11, 2025 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below . Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Fetalsanamr@dpwh.gov.ph Engr. Emmanuel A. Manalaysay Engr. Emmanauel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Fetalsanamr@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson