Vehicle Tenders

Details: Page 1 Of page 1 Of page 1 Of page 1 Of this Is A Sources Sought Announcement Only this Is A Sources Sought Notice Only And It Is Not A Solicitation Announcement. The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Sources Capable Of Providing The Services Described Below And Their Socio-economic Size Classification In Accordance With Naics Code 621910 (ambulance Service). Responses Will Be Used By The Government To Make Appropriate Acquisition Decisions. After A Review Of The Responses To This Sources Sought Notice, A Solicitation Announcement May Be Posted. A Response To This Sources Sought Notice Is Not An Adequate Reply To A Potentially Forthcoming Solicitation. the Department Of Veterans Affairs, (nco 08), Bay Pines Va Healthcare System (vahcs) Has A Need For Non-emergency Ambulance Transportation Service. We Are Seeking Authorized Service-disabled Veteran Owned Small Business (sdvosb S), Veteran Owned Small Business (vosb S), Small Business (sb S) Or Large Business (lb S) That Can Provide All Services. the Contractor Shall Provide All Vehicles, Personnel, Management, Supplies, Equipment, And Necessary Reporting For The Provision Of Stretcher Transports, Basic Life Support (bls), Advanced Life Support (als), Critical Care Transport (cct) Services. The Contactor Shall Make These Ambulance Services Available To The Va As Needed, 24 Hours A Day, Seven Days A Week (24/7), Including Weekends And Holidays. background: The Bay Pines Va Healthcare System (vahcs) Main Campus Is Located At 10000 Bay Pines Blvd Bay Pines, Fl 33744, Serving Over 1000,00 Veterans, Primarily From The Tampa Bay/ St Petersburg Area And It S 8 Community-based Outpatient Clinics. The Hospital Has 400 Inpatient Beds And Sees Approximately 10,000 Inpatient Admissions And 997,360 Outpatient Visits A Year. Veterans Served Within This Facility Lives Within The Following Counties And Zip Codes. county/zip Code county/zip Code county/zip Code county/zip Code county/zip Code pinellas/33701 pinellas/33702 pinellas/33703 pinellas/33706 pinellas/33707 pinellas/33708 pinellas/33711 pinellas/33715 pinellas/33760 pinellas/33761 pinellas/33762 pinellas/33764 pinellas/33767 pinellas/33771 pinellas/33772 pinellas/33774 pinellas/33777 pinellas/33778 pinellas/33785 pinellas/33786 pinellas/34684 pinellas/34689 pinellas/34691 pinellas/34695 pinellas/34698 hernando pasco polk hillsborough manatee sarasota hardee de Soto charlotte highlands scope/requirements types Of Ambulance Service: the Contractor Shall Provide Emergent, Non-emergent Stretcher Transports, Basic Life Support (bls), Advanced Life Support (als), And Critical Care Transport (cct) Tier 1, 2, And 3 Ambulance Services On An As-needed Basis In Accordance With All Federal, State, And Local Regulations. occasionally A Veteran Will Need To Be Transported With Va Staff And Equipment; The Contractor Shall Return Va Staff And Equipment To The Original Place Of Pick-up. documentation Of Technical Expertise Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. Offeror S Response To This Notice Shall Include The Following Information: (a) Company Name (b) Address (c) Point Of Contact (d) Phone, Fax, And Email (e) Unique Entity Id (f) Cage Code (g) Tax Id Number (h) Type Of Business, E.g. Small Or Other, As Appropriate And (i) Must Provide A Capability Statement That Addresses The Organization S Qualifications And Ability To Perform The Specific Operational Requirement Listed Above. no Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Sources Sought And No Contract Will Be Directly Awarded On The Basis Of This Sources Sought. Any Information Submitted By Respondents To This Sources Sought Shall Be Voluntary. to Respond To This Source Sought Notice, Please Email The Information Requested To Lakiesha Anderson, Contracting Officer, At Lakiesha.anderson@va.gov. Please Reference 36c24825q0207- Bay Pines Ground Ambulance Service In The Subject Of The Email. Facsimile Response Will Not Be Accepted. Responses To This Sources Sought Notice Are Not Considered Adequate To The Solicitation Announcement. All Interested Offerors Will Have To Respond To The Solicitation Announcement In Additional To Responding To This Sources Sought Notice. The Closing Date And Time Of This Sources Sought Notice Is 3 January 2025 At 4:30 Pm Eastern Time.

Details: Description Request For Quotation Date: January 03, 2025 Quotation No. Rfq-25-01-001 Please Quote Your Lowest Lot Price On The Item(s) / Job Listed Below, Subject To The Terms And Conditions, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than January 07, 2025, 10:00 Am (sgd.) Engr. Andrew John T. Pablo Bac Chairperson The Concepcion Water District (cwd) Requires The Services Of A Doh Accredited Laboratory To Perform Physical & Chemical Water Analyses In Accordance With The Philippine National Standards For Drinking Water (pnsdw). Water Samples Shall Be Examined Only By A Doh Accredited Laboratory And Adhere To The Drinking Water Quality Parameters, As Follows: Parameters Sampling Location Price 1. Arsenic (as) Treatment Plant Outlet/source 2. Cadmium (cd) Treatment Plant Outlet/source & Consumer’s Tap 3. Lead (pb) Treatment Plant Outlet/source /source & Consumer’s Tap 4. Nitrate (no3) Treatment Plant Outlet/source 5. Color (apparent) Treatment Plant Outlet/source /source & Consumer’s Tap 6. Turbidity Treatment Plant Outlet/source /source & Consumer’s Tap 7. Ph Treatment Plant Outlet/source /source & Consumer’s Tap 8. Total Dissolved Solids (tds) Treatment Plant Outlet/source 9. Odor Treatment Plant Outlet/source 10. Taste Treatment Plant Outlet/source 11. Chloride Treatment Plant Outlet/source 12. Hardness Treatment Plant Outlet/source 13. Iron Treatment Plant Outlet/source 14. Manganese Treatment Plant Outlet/source 15. Conductivity Treatment Plant Outlet/source 16. Sulfate Treatment Plant Outlet/source 17. Disinfection Residual: - Residual Chlorine (mg/l) - Chlorine Dioxide Are 0.20- 0.40mg/l Other Than Chlorine Dioxide The Parameters Are 0.30-1.50mg/l Treatment Plant Outlet/source 18. Thermotolerant Coliform/e. Coli Treatment Plant Outlet/source 19. Pesticide Test Of One (1) Pump Station Treatment Plant Outlet/source (all Wells) Abc : Php342,000.00 (re-sampling [if Any] Excluded) The Concepcion Water District Requires The Accredited Laboratory To Make Ready Of The Physical And Chemical Analysis Results For Collection In A Semester. Subject : Laboratory Services/physical And Chemical Analysis Sampling : *nineteen (19) Wells Sample, Two (2) Times A Year *on-site Collection Of Water Sample From Distribution Well And Consumer’s Tap; *perform Water Sampling Depending On The Parameters Requested; *analyzed Water Sample Based On The Parameters Specified; *provide Bottles For Sampling; *submit/deliver Results Of Physical And Chemical Analysis Within A Month From Date Of Submission. Contract : For The Year 2025 Terms And Conditions: 1. The Contracted Accredited Laboratory Should Provide Water Sampling Bottles. 2. Provide Vehicles And Manpower To Take Water Samples At All Sites. 3. Deliver All Water Samples To The Laboratory Along With The Cwd Employee/s And Municipal Health Representative. 4. Inform And Send Via E-mail (concepcionwaterdistrict@yahoo.com) The Results Of The Physical And Chemical Test And Provide Hard Copy As Well. 5. In Case Of Re-sample (failed Result) The Contracted Party/accredited Laboratory Shall Inform The Cwd In Any Form Of Communication & Must Follow Conditions Nos. 1 – 4 As Stated And This Is/are Free Of Charge. 6. The Cwd Requires The Accredited Laboratory To Release The Physical And Chemical Analysis Result Within A Month Counting From The Day The Water Samples Were Delivered To The Laboratory With Statement Of Account And Payment Shall Be Based From The Contracted Amount In The Form Of Check. 7. Comply With Prompt Release Of The Result Via Email Along With The Statement Of Account/billing Statement. 8. Payment: Upon Results Availability. 9. Prices Are Inclusive Of 7% Gov’t Tax (to Be Deducted Upon Payment, Bir Tax Cert. 2307 Is Issued. 10. Others/documentary Requirements: A.) Doh Accreditation Certificate B.) Mayor’s/business Permit; C.) Philgeps Registration Certificate; D.) Updated Dti For Single Proprietor & Updated General Information Sheet For Corporation; E.) Annual Income Tax/business Tax Return, Paid Thru Efps Shall Be Accepted; F.) Tax Clearance Certificate. Prices Quoted By: Supplier: __________________________________ ___________________________________________ Printed Name And Signature Tel. No: ________________ Date: __________________

Details: Amendment P00003 For The National Aeronautics And Space Administration (nasa) Request For Proposal (rfp) Smas Ii Acquisition Has Been Released. the Purpose Ofamendment P00003 Is To Remove The Hyperlink Url Forwarding Function For Proposal Submission And Proposal Submission Instructions As Reflected In Section L Provision “electronic Submission Of Proposals – Proposal Marking And Delivery Through Nasa’s Efss Box.” Offerors Shall Copy And Paste The Url Directly Into A Browser To Ensure Full Functionality. Please Note That The Revised Submission Link Also References The Fy25 Solicitation Number. This Amendment Replaces The Request For Proposal (rfp) In Its Entirety In Order To Both Provide The Updated Links In The Referenced Provision And Reflect Amendment P00003 In The Header Of Each Solicitation Page. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ amendment P00002 For The National Aeronautics And Space Administration (nasa) Request For Proposal (rfp) Smas Ii Acquisition Has Been Released. the Primary Purpose Of Amendment P00002 Is To Respond To Rfp Questions And Comments In Relation To The Msfc Smas Ii Amendment P00001 Solicitation. Attachment A, Responses To Industry Rfp Questions, Provides Responses To Questions And Comments Provided By Industry. Attachment B, Summary Of Changes, Provides A From-to Matrix Of The Resulting Changes Made Between Amendment P00001 And Amendment P00002. in Relation To Section L, Provision Msfc 52.205-90, Designated Point Of Contact, Paragraph (b), The Period For Questions Or Comments Relative To This Acquisition Has Closed (i.e., Questions And Comments Relative To This Acquisition Were Previously Due No Later Than 5:00 P.m., Central Time, December 4, 2024). At This Time, The Government Is No Longer Accepting Additional Questions Or Comments In Relation To The Solicitation, As Released On December 9, 2024. offerors Are Responsible For Downloading Their Own Copy Of The Amended Solicitation In Its Entirety. Furthermore, It Also Remains Each Offeror's Responsibility To Continue Monitoring Sam.gov For Any Future Amendment(s) To This Solicitation. As Part Of Any Resultant Proposal Submission, Offerors Shall Acknowledge Receipt Of All Solicitation Amendment(s). ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ you Are Invited To Submit A Proposal In Response To The National Aeronautics And Space Administration (nasa) George C. Marshall Space Flight Center’s (msfc) Safety And Mission Assurance Services Ii (smas Ii) Solicitation. the Principal Purpose Of The Smas Ii Contract Is To Provide Services And Skills Across A Broad Spectrum Of Safety And Mission Assurance (sma) Disciplines. These Sma Disciplines Include But Are Not Limited To The Following: System Safety, Reliability And Maintainability, Software Assurance, Quality Engineering, Quality Assurance, Independent Assessment, Industrial Discipline Support, Industrial Safety Program, And Pressure Systems. These Services Will Support The Marshall Space Flight Center (msfc), Msfc Efforts At Kennedy Space Center (ksc), Michoud Assembly Facility (maf) And Stennis Space Center (ssc) Requirements And Be Open For Use By Other Nasa Centers, Per Msfc Discretion. this Competitive Acquisition Will Be A Small Business Set Aside And Will Result In A Single-award Indefinite-delivery, Indefinite-quantity (idiq) Contract With Cost-plus-award-fee (cpaf) Task Orders (tos). The Contract Will Have The Option To Transition From Cpaf To Cost-plus-fixed-fee (cpff) Tos And The Option To Transition Back To Cpaf Tos If Appropriate. The Final Solicitation Specifies A Eight-year Period Of Performance. The North American Industry Classification System (naics) Code For This Acquisition Is 541715, Research And Development In The Physical, Engineering, And Life Sciences (except Nanotechnology And Biotechnology), (exception 3) - Guided Missiles And Space Vehicles, Their Propulsion Units And Propulsion Parts, And The Small Business Size Standard Is 1,300 Employees. all Questions Regarding This Rfp Should Be Submitted In Writing, Electronically To Maranda Mccord, Contracting Officer, At Maranda.b.mccord@nasa.gov No Later Than 2:00 P.m., Central Time, November 22, 2024. Offerors Are Encouraged To Submit Questions As Soon As Possible For Consideration. nasa Clause 1852.215-84, Ombudsman, Is Applicable. The Center Ombudsman For This Acquisition Can Be Found At: Https://www.hq.nasa.gov/office/procurement/regs/procurement-ombuds-comp-advocate-listing.pdf. in Accordance With Nfs 1815.201(f), A “blackout Notice” Has Been Issued To Nasa Personnel. All Inquiries/communications Pertaining To This Acquisition Shall Be Directed Only To The Contracting Officer.

Details: Background: the Advanced Trade Analytics Platform (atap) Provides Cbp With A Single, Organized Point Of Access For Cbp’s Internal And External Sources Of Trade Information, Using This Information To Develop From-scratch Data Analytic, Machine Learning, And Ai Products Meant To Enhance Cbp’s Execution Of The Trade Mission. Atap Is A Fully Operational, Internal Cbp System. cbp Intends To Obtain Contracted Data Scientists To Support The Development Of These Analytic Work Products In Collaboration With Atap’s Federal Personnel, Business Analysts, Data Architects, Engineers, And Visualization Experts To Support Mission Needs. Key Components Of The Job Will Include Data Analysis And Modeling, In Which The Data Scientist Will Build And Maintain Models To Support Business Use Cases. Atap Utilizes A Service Delivery Model That Allows Cbp To Direct Resources To The Areas Of Highest Risk Or Opportunity Within Cbp, With Work Prioritized By The Atap Director Or Their Designee. Deliverables For This Team May Include, But Are Not Limited To, Data Analytic Models Utilizing A Wide Range Of Analytics (e.g., Diagnostic, Predictive), Data Extracts, And Data Visualizations. cbp Projects A Need Of One (1) Chief Data Officer / On-site Project Lead, Once (1) Senior Data Scientist, Nine (9) Data Scientists, Five (5) Data Analysts, And One (1) User Interface Designer. Cbp Requires The Data Scientists And Project Lead To Have Advanced Degrees (ms/ph.d) In Addition To Substantial Experience. A Draft Copy Of The Statement Of Work, Which Details The Level Of Experience For Each Labor Category, Is Attached To This Request. All Assigned Staff Would Need To Successfully Pass A Cbp Background Investigation. requested Information: provide A Capabilities Statement As It Relates To Cbp’s Draft Sow. provide Three (3) Examples Of Contracts With Ph.d. Level Work, Where Your Company Was The Prime Contractor, That Is Similar To The Requirements Outlined In The Sow? would Your Firm Be Able To Staff This Contract In-house Or Do You Foresee The Need To Subcontract Out Portions Of The Work? discuss Approaches For Transitioning In Contractor Personnel In Absence Of Incumbent Contractor Personnel. Please Include In Your Response Your Company’s Experience Using These Recommended Approaches And Lessons Learned. would Your Company Be Able To Provide Cbp Background Investigation Cleared Contractors At Award Date? what North American Industrial Classification System (naics) Does Your Firm Believe Most Applicable To The Requirement At Hand? response Format And Limits interested Parties Should Submit A Written Response, No More Than Eight (8) Pages In Length, That: demonstrates The Respondent’s Ability To Meet Or Exceed The Attached Draft Sow Requirements; addresses Each Of The Requests For Information; provides The Company Name And Address, Point Of Contact With Phone Number And E-mail, Business Size, Uei Number, And Available Contracting Vehicles; cost/price Estimates And An Identification Of Potential Cost Drivers, Tradeoffs, And/or Savings; And, any Other Pertinent Information Such As Assumptions Made Relating To The Ability To Satisfy Specific Requirements Or Questions Regarding Ambiguous Or Poorly Defined Requirements. all Responses Shall Be Submitted Electronically (adobe Pdf Format). Responding To This Rfi Is Not A Prerequisite To Bid On A Subsequent Rfp, If One Is Issued. Responses May Include Links To Available Product Demonstration Websites Or Videos. Proprietary Information, If Any, Should Be Minimized And Must Be Clearly Marked. To Aid The Government, Please Segregate Proprietary Information. responses Are Due No Later Than 12pm Et, January 24, 2025. Responses Shall Be Submitted Via E-mail To Contracting Officer Jared A. Tritle At: Jared.a.tritle@cbp.dhs.gov. questions questions Regarding This Announcement Shall Be Submitted In Writing By E-mail To The Contracting Officer, Email Address Listed Above. Verbal Questions Will Not Be Accepted. Questions, If Not Answered Directly To The Respondee, May Be Answered By Posting On Sam; Accordingly, Questions Shall Not Contain Proprietary, Sensitive, Or Classified Information. summary this Is Only A Request For Information (rfi). The Information Derived From This Rfi Will Assist Cbp In Identifying Sources That Can Satisfy The Requirements Of The Attached Draft Sow. The Information And Specifications Provided In The Rfi Are Subject To Change And Are Not Binding On The Government. Cbp Has Not Made A Commitment To Procure Any Of The Items Presented, And Release Of This Rfi Should Not Be Construed As A Commitment Or Authorization To Incur Cost For Which Reimbursement Would Be Required Or Sought. All Submissions Become Government Property And Will Not Be Returned.

Details: Description Mindanao State University Reference Nos. 2508-24 / 12-06-24 Fatima, General Santos City Project Name: Location: Request For Quotation __________________________ Company Name Date : December 26, 2024 __________________________ Quotation No. : 2466-24 Address Please Quote Your Best Proposal For Item/s Listed Below, Subject To The Terms And Conditions Duly Signed By Your Representative. Terms And Conditions: 1. Mayor's/business Permit 2. Philgeps Registration Certificate 3. Supplier/bidder Previously Submitted Documentary Requirements May Not Submit. 4. All Entries Shall Be Typed Or Written In A Clear Legible Manner 5. No Alternate Quotation/offer Is Allowed, Suppliers Who Submitted More Than One Quotation Shall Be Automatically Disqualified. 6. All Prices Offered Herein Are Valid, Binding And Effective For Thirty (30) Calendar Days Upon Issuance Of This Document. Alternate Bids Shall Be Rejected. 7. Delivery Period Within Fifteen (15) Calendar Days 8. Price Validity Shall Be For Period Of Thirty (30) Calendar Days. 9.. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered. 10. In Case Suppliers Pro Forma Quotation Is Submitted, Conditions Will Be Governed By The Submitted Signed Terms Of Reference/technical Specifications. 11. Partial Bid Is Allowed, Evaluation, Comparison And Contract Award Shall Be Made Per Item; Partial Bid Is Not Allowed; The Goods Are Grouped In A Single Lot, Evaluation, Comparison, And Contract Award Shall Be Made Per Lot Very Truly Yours, Randy P. Asturias, D'eng. Bac Chairman Item Qty Abc Technical Specifications Unit Price Total Amount (to Be Filled Up By The Suppliers) Unit Unit Price Total Amount 1 1 Camera (1-inch Cmos Sensor That Puts Detail-rich Imaging Right In The Palm Of Your Hand. With A 2-inch Rotatable Touchscreen And Full-pixel Fast Focusing, Go Horizontal Or Vertical For More Precise Awareness And Control. 4k/120fps, Three-axis Mechanical Stabilization, And A Host Of Intelligent Features Make Pocket 3 Ready For Any Moving Moment. 139.7×42.2×33.5 Mm (l×w×h), Weight 179 G, Size: 2.0 Inches, Resolution: 314×556 Brightness: 700 Nits, And Microsd (up To 512 Gb)) Unit 2 2 Digital Camera (sensor: 24.2 Mp Aps-c Cmos Sensor. Processor: Digic X For Enhanced Image Quality And Performance. Units Iso Range: 100–32,000 (expandable To 51,200). Autofocus: Dual Pixel Cmos Af With Subject Detection For People, Animals, And Vehicles. Continuous Shooting Speed: Up To 15 Fps With A Mechanical Shutter And 23 Fps With An Electronic Shutter. Image Stabilization: Digital Is For Video, Combined With Lens-based Stabilization. Video Recording: 4k Uhd At Up To 60 Fps, Full Hd 1080p At Up To 120 Fps, And Hdr Pq Support For 10-bit Color Depth. 3 3 Tripod (low-to-the-ground 6″ Minimum Height Units 6.6 Lb Payload, 65″ Max Height Converts Into 64″ Monopod, Fluid Damping System Independent Pan And Tilt Locks, Spring-loaded Counterbalance Includes Quick Release Plate And Pan Bar, Bubble Levels) ***nothing Follows*** Various Capital Outlay For The Conduct Of The Ched-lakas Special Project Entitled, "social And Cultural Considerations In Designing Clinical Simulations For Patients From Underrepresented Communities" - Com Total Abc ₱285,000.00 Total Amount Instructions: See Attached Specifications/important Instructions For Items. (please Provide Complete Information Below) Delivery Period : Warranty: Price Validity : We Undertake, If Our Proposal Is Accepted, To Supply/deliver The Goods In Accordance With The Specification And/or Delivery Schedule Unit Purchase/job Order Or A Contract Is Prepared And Executed, This Quotation/proposal Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Proposal You May Receive. After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. _______________________________ Signature Over Printed Name Of Bidder Tel. No. / Cellphone No.: __________ __________________________________ E-mail Address: Signature Over Printed Name Of Canvasser Abu

Details: Description Lot No. Unit Quantity Specifications Approved Budget For Contract Price Of Bid Documents Delivery Period 1 Unit 11 4wd Tractor (100 Hp) With Farm Implements 38,500,000.00 25,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9053 Technical Specification: > Rated Power: 100 Hp, Minimum > 4 Cylinder, 4 Stroke, Water-cooled, Direct Injection, Diesel Engine > Pto Power: 85 % Of The Engine's Maximum Power, Minimum > Specific Fuel Consumption @ Max. Pto Power:270g/kw-hr, Maximum > Noise Level: 90db Max. > Aspiration Method: Turbocharged > Steering System: Hydraulic Power/full Hydrostatic > Brake System: Hydraulic/mechanical > No. Of Drive: 4 Wheel Drive > Transmission: Sychromesh > Three Point Hitch: Category 2 > Differential: Bevel Gear With Differential Lock (rear) > Minimum Groud Clearance: 300mm > Roll Over Protective Structure (rops) > Seatbelt > Canopy > With Reflectorized On Hood Left And Right, 10 Inches Barmm And Bta Logo Respectively > Tools (heavy Duty) > Tire Wrench For Tractor And Trailer > Hydraulic Jack 5 Tons > Pressure Gauge > Grease Gun 18 Inches > Complete Set Of Socket Wrench(8mm-32mm) > Power Handle Drive ½ > Star And Flat Screw 12’’ > Complete Set Of Open And Close Wrench (8mm-32mm) > Mechanical Plier 6’’ > Pipe Wrench 18’’ > Disc Plow > Width Of Cut:1,100mm,minimum > No. Of Disc/blade: 4 > Average Depth Of Tillage: 190 Mm, Minimum > Actual Field Capacity: 0.4 Ha/hr, Minimum > Diameter: 26 Inches · Disc Harrow (conforms With Paes 120:2001) > 20 Pcs X 24’’ Diameter > Disc: 4 Mm (thickness) > Frame: 6 Mm (thickness) > Actual Field Capacity: 1 Ha/hr, Minimum > Field Efficiency: 90%, Minimum · Trailer (conforms With Paes 136:2001 > Capacity: 5 Tons > Tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Later Than Year 2023 > Dimension: 10 Ft X 6ft X 2 Ft (lxwxh) > Flooring Gauge #26 > With Heavy Duty Auxiliary Leaf Spring Minimum Of 7 > Chassis: 6mm (thickness) · With Amtec Test Result For Tractor Alone · With Amtec Test Result For Disc Harrow · With Amtec Test Result For Disc Plough · With Certificate Of Conformity For Tractor · With Namdac Certificate · With Pto Certificate By Bafe · All Brand New · Full Tank Diesel Engine · Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr · Should Have Service Center Within The Neighboring Region · The Brand Of The Engine/ Prime Mover To Be Offered Shall Be In Existence In The Philippine Market For At Least 20 Years From The Date Of Invitation To Bid · Warranty:- 1 Year Warranty On Parts And Services And Two (2) Years On The Engine · Control Instructions And Labels Of The Machine Should Be In English · Must Conduct Training In Operations And Maintenance On Recipients. ***nothing Follows*** Delivery Area Maguindanao Del Norte, Maguindanao Del Norte & Sga 2 Unit 2 4wd Tractor (100 Hp) With Farm Implements 7,000,000.00 10,000.00- Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9051 Technical Specification: > Rated Power: 100 Hp, Minimum > 4 Cylinder, 4 Stroke, Water-cooled, Direct Injection, Diesel Engine > Pto Power: 85 % Of The Engine's Maximum Power, Minimum > Specific Fuel Consumption @ Max. Pto Power:270g/kw-hr, Maximum > Noise Level: 90db Max. > Aspiration Method: Turbocharged > Steering System: Hydraulic Power/full Hydrostatic > Brake System: Hydraulic/mechanical > No. Of Drive: 4 Wheel Drive > Transmission: Sychromesh > Three Point Hitch: Category 2 > Differential: Bevel Gear With Differential Lock (rear) > Minimum Groud Clearance: 300mm > Roll Over Protective Structure (rops) > Seatbelt > Canopy > With Reflectorized On Hood Left And Right, 10 Inches Barmm And Bta Logo Respectively > Tools (heavy Duty) > Tire Wrench For Tractor And Trailer > Hydraulic Jack 5 Tons > Pressure Gauge > Grease Gun 18 Inches > Complete Set Of Socket Wrench(8mm-32mm) > Power Handle Drive ½ > Star And Flat Screw 12’’ > Complete Set Of Open And Close Wrench (8mm-32mm) > Mechanical Plier 6’’ > Pipe Wrench 18’’ > Disc Plow > Width Of Cut:1,100mm,minimum > No. Of Disc/blade: 4 > Average Depth Of Tillage: 190 Mm, Minimum > Actual Field Capacity: 0.4 Ha/hr, Minimum > Diameter: 26 Inches · Disc Harrow (conforms With Paes 120:2001) > 20 Pcs X 24’’ Diameter > Disc: 4 Mm (thickness) > Frame: 6 Mm (thickness) > Actual Field Capacity: 1 Ha/hr, Minimum > Field Efficiency: 90%, Minimum · Trailer (conforms With Paes 136:2001 > Capacity: 5 Tons > Tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Later Than Year 2023 > Dimension: 10 Ft X 6ft X 2 Ft (lxwxh) > Flooring Gauge #26 > With Heavy Duty Auxiliary Leaf Spring Minimum Of 7 > Chassis: 6mm (thickness) · With Amtec Test Result For Tractor Alone · With Amtec Test Result For Disc Harrow · With Amtec Test Result For Disc Plough · With Certificate Of Conformity For Tractor · With Namdac Certificate · With Pto Certificate By Bafe · All Brand New · Full Tank Diesel Engine · Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr · Should Have Service Center Within The Neighboring Region · The Brand Of The Engine/ Prime Mover To Be Offered Shall Be In Existence In The Philippine Market For At Least 20 Years From The Date Of Invitation To Bid · Warranty:- 1 Year Warranty On Parts And Services And Two (2) Years On The Engine · Control Instructions And Labels Of The Machine Should Be In English · Must Conduct Training In Operations And Maintenance On Recipients. ***nothing Follows*** Delivery Area Sulu 3 Unit 2 4wd Tractor (100 Hp) With Farm Implements 7,200,000.00 10,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9052 Technical Specification: > Rated Power: 100 Hp, Minimum > 4 Cylinder, 4 Stroke, Water-cooled, Direct Injection, Diesel Engine > Pto Power: 85 % Of The Engine's Maximum Power, Minimum > Specific Fuel Consumption @ Max. Pto Power:270g/kw-hr, Maximum > Noise Level: 90db Max. > Aspiration Method: Turbocharged > Steering System: Hydraulic Power/full Hydrostatic > Brake System: Hydraulic/mechanical > No. Of Drive: 4 Wheel Drive > Transmission: Sychromesh > Three Point Hitch: Category 2 > Differential: Bevel Gear With Differential Lock (rear) > Minimum Groud Clearance: 300mm > Roll Over Protective Structure (rops) > Seatbelt > Canopy > With Reflectorized On Hood Left And Right, 10 Inches Barmm And Bta Logo Respectively > Tools (heavy Duty) > Tire Wrench For Tractor And Trailer > Hydraulic Jack 5 Tons > Pressure Gauge > Grease Gun 18 Inches > Complete Set Of Socket Wrench(8mm-32mm) > Power Handle Drive ½ > Star And Flat Screw 12’’ > Complete Set Of Open And Close Wrench (8mm-32mm) > Mechanical Plier 6’’ > Pipe Wrench 18’’ > Disc Plow > Width Of Cut:1,100mm,minimum > No. Of Disc/blade: 4 > Average Depth Of Tillage: 190 Mm, Minimum > Actual Field Capacity: 0.4 Ha/hr, Minimum > Diameter: 26 Inches · Disc Harrow (conforms With Paes 120:2001) > 20 Pcs X 24’’ Diameter > Disc: 4 Mm (thickness) > Frame: 6 Mm (thickness) > Actual Field Capacity: 1 Ha/hr, Minimum > Field Efficiency: 90%, Minimum · Trailer (conforms With Paes 136:2001 > Capacity: 5 Tons > Tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Later Than Year 2023 > Dimension: 10 Ft X 6ft X 2 Ft (lxwxh) > Flooring Gauge #26 > With Heavy Duty Auxiliary Leaf Spring Minimum Of 7 > Chassis: 6mm (thickness) · With Amtec Test Result For Tractor Alone · With Amtec Test Result For Disc Harrow · With Amtec Test Result For Disc Plough · With Certificate Of Conformity For Tractor · With Namdac Certificate · With Pto Certificate By Bafe · All Brand New · Full Tank Diesel Engine · Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr · Should Have Service Center Within The Neighboring Region · The Brand Of The Engine/ Prime Mover To Be Offered Shall Be In Existence In The Philippine Market For At Least 20 Years From The Date Of Invitation To Bid · Warranty:- 1 Year Warranty On Parts And Services And Two (2) Years On The Engine · Control Instructions And Labels Of The Machine Should Be In English · Must Conduct Training In Operations And Maintenance On Recipients. ***nothing Follows*** Delivery Area Maguindanao Del Norte & Maguindanao Del Sur 4 Unit 13 Delivery Truck (wing Van) 36,400,000.00 25,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9050 Prime Mover Rated Power : 350hp Min @ 1800rpm Engine Displacement : 12.8l Min Fuel Type : Diesel Engine Type : Inline 6 Cylinder, Intercooler Turbo Engine Compression Ratio : 17.3 Min Manufacturer Year Model : 2010 Abdve Performance Classification Aspiration Method : Asymmetric Turbo Charged And Intercooled Steering System: Power-assisted Steering Transmission : 7 Speed Manual Min. No. Of Drive : 2 Body And Cab No. Of Wheels : 11 (2 Front : 8 Rear : 1 Spare Tire) No. Of Studs : 10 Min Payload : 15,000 Kg Min Gross Vehicle Weight : 25,000 Kg Min Front Cabin : Single Rear Body Type : Wingvan W/ Side Bars /side-step Grille (2 Layer) Dropside Height ; 450 Mm, Min Body Length : 30 Ft, Min Brake System : Airbrake With Full Windshield And All Window Tint Essential Accessories Basic Tools And Jack ( Complete Set Of Tools) Early Warning Device (2 Pcs) Fire Extinguisher Warranty (1) Year With Lto Registration And Tpl With Full Tank Fuel (diesel) With Mafar And Tdif 12 " Diameter Logo (painted) And For Official Used Only Lettering ***nothing Follows*** Delivery Area Maguindanao Del Norte, Maguindanao Del Sur, Sga And Tawi-tawi 5 Unit 1 Delivery Truck (wing Van) 5,625,000.00 10,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9049 Prime Mover Rated Power : 350hp Min @ 1800rpm Engine Displacement : 12.8l Min Fuel Type : Diesel Engine Type : Inline 6 Cylinder, Intercooler Turbo Engine Compression Ratio : 17.3 Min Manufacturer Year Model : 2010 Abdve Performance Classification Aspiration Method : Asymmetric Turbo Charged And Intercooled Steering System: Power-assisted Steering Transmission : 7 Speed Manual Min. No. Of Drive : 2 Body And Cab No. Of Wheels : 11 (2 Front : 8 Rear : 1 Spare Tire) No. Of Studs : 10 Min Payload : 15,000 Kg Min Gross Vehicle Weight : 25,000 Kg Min Front Cabin : Single Rear Body Type : Wingvan W/ Side Bars /side-step Grille (2 Layer) Dropside Height ; 450 Mm, Min Body Length : 30 Ft, Min Brake System : Airbrake With Full Windshield And All Window Tint Essential Accessories Basic Tools And Jack ( Complete Set Of Tools) Early Warning Device (2 Pcs) Fire Extinguisher Warranty (1) Year With Lto Registration And Tpl With Full Tank Fuel (diesel) With Mafar And Tdif 12 " Diameter Logo (painted) And For Official Used Only Lettering ***nothing Follows*** Delivery Area Sulu 6 Unit 10 Corn Sheller 2,600,000.00 5,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9061 Technical Specifications: > Prime Mover: 14hp Diesel Engine, 4-stroke, Water-cooled 1 Cylinder > Output Capacity : 4.5 Tons/hr > Shelling Recovery : Minimum Of 99% > Shelling Efficiency, Minimum Of 99.5% Maximum Losses A. Blower : 1 B. Separation : 1 C. Unshelled : 0.5 D. Scattering : 0.5 Purity, Minimum Of 98% > Engine (1 Year Warranty Against Factory Defects) > Warranty Shall Be Provided For Parts And Services Within One Year After The Acceptance Of The Corn Sheller, Except On Fast Moving And Easy To Wear Parts Such As Belts. > Provided With Fuel And Oil During Actual Testing. > With Brand New Tires, Size:14 Inches Diameter Wheel Rim > With Amtec Test Result For Machine And Engine Must Conform To Paes With Standard Heavy Duty Tools: 2 Pcs. Screw Driver (flat Screw And Philips Screw- 12 Inches) 1 Pc. Open Wrench (10 Mm X11 Mm) 1 Pc. Open Wrench (12 Mm X14 Mm) 1 Pc. Open Wrench (14 Mm X17 Mm) 1 Pc. Open Wrench (19 Mm X21 Mm) 1 Pc. Holder Of Tools *** Nothing Follows *** Delivery Area Maguindanao Del Norte Maguindanao Del Sur 7 Unit 127 Hand Tractor 39,420,800.00 25,000.00 Goods Must Be Delivered Within 30 Calendar Days After The Receipt Of The Notice To Proceed (ntp) 2024-11-9048 Specification Application: Corn Machine Type: Corn Harvester Type: Mini Harvester Use: Corn Harvester Structural Type: Handheld Four-wheel Seif-propelled Number Of Row: 1 Working Width(mm): 60mm Tractor Power (hp): 10-13hp Engine: 192f Engine : Gasoline Or Diesel Engine Steering: Built-in Dual Differential Transmission Method: Gear Transmission Row Distance (mm): 10-20mm Number Of Cutting Tools: 12pieces Blade Length: 8cm Cutting Width (mm): 70cm Dimension: (l*w*h) 2.2*0.85*1.2m Packaging And Delivery Selling Unit: Single Item Single Packaging Size: 137x67x100cm Single Gross Weight: 280kg *** Nothing Follows *** Delivery Area Maguiundanao Del Sur & Maguindanao Del Norte

Details: Sources Sought Response Form ellsworth Afb B-21 West Alert Apron Epss sources Sought Notice # W9128f25sm007 anticipated Solicitation # W9128f25r0033 purpose: By Way Of This Sources Sought Notice, The Usace-omaha District Intends To Determine The Extent Of Capable Small Business Or Other Than Small Business Firms That Are Engaged In Providing The Requirement Described Hereunder. The Responses To This Notice Will Be Used For Planning Purposes For Upcoming Procurements. Therefore, This Notice Does Not Constitute A Request For Proposal (rfp), Quotation Or Bid; It Does Not Guarantee The Future Issue Of An Rfq/rfp/ifb; Nor Does It Commit The Government To Contract For Any Supply, Service, Or Construction. There Is No Solicitation Currently Available. further, This Agency Will Not Accept Unsolicited Proposals. Respondents Are Advised That This Agency Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Notice. All Costs Associated With Responding To This Notice Will Be Solely At The Responding Party's Expense. At This Time, Proprietary Information Is Not Being Requested, And Respondents Shall Refrain From Providing Proprietary Information In Response To This Sources Sought Notice. project Description: this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). this Project Will Provide Seven (7) New Pre-engineered Metal Environmental Protection Shelters (epss), Approximately 20,000 Sf Each. This Project Is Located Directly Adjacent To And Required To Coordinate With The Fy25 East Alert Apron Eps Project, With Target Award In Fy25. epss Are Sized To Fit The B-2a “spirit” Aircraft With Space To Perform General Aircraft Maintenance. The Project Also Includes Associated Airfield And Ground Support Equipment (gse) Paving. Supporting Facilities Include Two (2) Maintenance Kiosks, Approximately 160 Sf Each, Providing Electrical And Communication Infrastructure To The Epss. Additional Site Features Include Blast Deflectors, Pl-3 Boundary Fencing And Lighting, And An Entry Control Point (ecp). This Project Will Include A Space Or Spaces Constructed To Afi 16-1404 Requirements. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. This Project Will Comply With Dod Antiterrorism/force Protection Requirements Per Unified Facilities Criteria. special Construction And Functional Requirements: The Project Will Be Constructed On / Near The Existing Alert Apron At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Facilities, Utilities, And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. New Airfield Apron Will Be Designed In Compliance With Ufc 3-260-02 And Will Be Constructed In Compliance With Ufgs 32 13 14.13. small Businesses Are Reminded Under Far 52.219-14(c) (1), Limitations On Subcontracting Services. At Least 50 Percent Of The Cost Of Contract Performance Incurred For Personnel Shall Be Expended For Employees Of The Concern. Prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. (for Construction): Project Period Of Performance: 800 Calendar Days From Construction Ntp. responses: Please Respond To All Information Requested In This Notice Not Later Than 2:00 Pm Cst 03-jan-2025. Please Include The Sources Sought Notice Identification Number In The Subject Line Of The Email Submission With Attention To: James.r.willett@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil. required Information To Be Submitted In Response To This Notice: company Name, Address, Phone Number, Point Of Contract, Email, Web Address: cage Code And Unique Entity Identifier (uei): north American Industry Classification System Code (naics): state Whether Your Firm Is Classified By The Small Business Administration As Any Of The Following: small Business small Disadvantaged Business service-disabled Veteran Owned Small Business (sdvosb) section 8(a) women Owned Small Business (wosb) hubzone historically Black Colleges And Universities/minority Institutions none Of The Above is Your Company Currently Registered In System For Award Management (sam)? has Your Company Performed Work For The Federal Government Under A Different Name Or Uei/duns #, Or As A Member Of A Joint Venture (jv)? If Yes, Provide An Explanation: capabilities And Submission Requirements: submission Details: all Interested, Capable, Qualified, And Responsive Contractors Under Naics Code 236220 Are Encouraged To Reply To This Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature As Described In The Project Description. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $50m. Narratives Shall Be No Longer Than 12 Pages. Email Responses Are Required. please Include The Following Information In Your Response/narrative: •company Name, Address, And Point Of Contact, With Phone Number And Email Address •cage Code And Duns/eid Number •business Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture •details Of Similar Projects And State Whether You Were The Prime Or Subcontractor •start And End Dates Of Construction Work •project References (including Owner With Phone Number And Email Address) •project Cost, Term, And Complexity Of Job •information On Your Bonding Capability - Specifically Identify Capacity Of Performance And Payment Bonds in Accordance With Dfars 236.204, The Magnitude Of This Project Is Expected To Range Between $25m And $100m. details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years: •construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) •construction Of Airfield Paving In Compliance With Ufc 3-260-02 Or Associated Unified Federal Guide Specifications. •construction Of Facilities To The Afi 16-1404 Or Equivalent Standards. •construction Of Facilities Designed To Resist Vibroacoustic Impacts Associated With Aircraft (or Other) Engine Runup And Taxiing. •construction Of Aircraft Blast Deflectors Or Equivalent Feature. •construction Of Facilities On A Dod Military Installation. •construction Of Facilities On An Active Airfield Flightline. •construction Of Facilities With Shared Access, Laydown, And Limits Of Work To Adjacent Projects Awarded Under Separate Contract. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. project Labor Agreement: project Labor Agreements (plas) Are Currently Required For Large-scale Construction Projects, Unless An Exception Is Determined To Apply To The Project. Large-scale Construction Projects Are Defined As Construction Projects With Estimated Costs Expected To Exceed $35m. If An Exception Does Not Apply, A Pla Will Be Required From All Offerors With Submission Of Their Initial Proposal. The Pla Will Be Evaluated On An Acceptable/unacceptable Basis. Submitted Plas Will Be Reviewed For Compliance With All Statutes, Regulations, Executive Orders, And Agency/ Contract Requirements. Offerors Are Encouraged To Review 22.504, General Requirements For Project Labor Agreements. comments: provide Comments Or Identify Any Concerns Your Company Has Regarding The Planned Solicitation. Note That The Government Will Not Be Responding To Inquiries About The Proposed Solicitation At This Time. Your Responses And Comments Will Be Used By Government Personnel To Assess The Viability And Scope Of The Proposed Solicitation And Will Be Kept In Strictest Confidence. Telephone Inquiries Will Not Be Accepted. estimated Construction Contract Award Will Be Second Quarter Of Fiscal Year 2026 (fy26).

Details: Description Republic Of The Philippines Province Of Apayao Municipality Of Conner Local Government Unit Invitation To Bid For; Project Title: Construction Of One (1) Unit Warehouse In Conner, Apayao Location: Paddaoan, Conner, Apayao Project Id: 24mgu-infra-048 The Local Government Unit Of Conner, Apayao, Through The Da-rfo-car Intends To Apply The Sum Of Twenty-four Million Seven Hundred Fifty Thousand Pesos Only (24,750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of One (1) Unit Warehouse In Conner, Apayao Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Conner, Apayao Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 907 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From Local Government Unit Of Conner, Apayao And Inspect The Bidding Documents At The Address Given Below From Civil Registrar Office 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders At The Office Of The Municipal Civil Registrar On December 27, 2024. {insert If Necessary: And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P 25,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 5. The Local Government Unit Of Conner, Apayao Will Hold A Pre-bid Conference On January 3, 2025 @ 10:00 Am At The Lgu-premises, Caglayan, Conner, Apayao Which Shall Be Open To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat In Person At The Office Of Civil Registrar Office On Or Before January 17, 2025 @ 9:00 Am (i) Manual Submission At The Office Address As Indicated Above. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8. Bid Opening Shall Be On January 17, 2025 @ 9:30 Am At The Given Address Below Lgu-premises, Caglayan, Conner, Apayao. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Local Government Unit Of Conner, Apayao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. Scope Of Work Item No. Description Unit Quantity A.1.1(6) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) Month 30 A.1.2(2) Provision Of 4x4 Pick Up Type Service Vehicle For The Engineer On Bare Rental Basis Month 30 A.1.1(11) Provision Of Furniture/fixtures Equipment And Appliances For The Field Office For The Engineer Lumpsum 1.00 B.3 Permit And Clearances Lumpsum 1.00 B.5 Project Billboard/signboard Each 1.00 B.7(2) Occupational Safety And Health Lumpsum 1.00 B.9 Mobilization/demobilization Lumpsum 1.00 B.16 Recognition Plate/project Marker Each 1.00 102(2) Surplus Common Excavation Cu.m. 3,000.00 803(1)a Structural Excavation (common Soil) Cu.m. 1,077.68 804(1)b Embankment From Borrow Cu.m. 218.40 804(4) Gravel Fill Cu.m. 88.09 311(1)e1 Portland Cement Concrete Pavement (280mm Thk.) Cu.m. 398.11 900(1)c2 Structural Concrete (footing And Slab On Fill), Class A, 28 Days Cu.m. 252.88 900(1)c4 Structural Concrete (column), Class A, 28 Days Cu.m. 115.45 900(1)c6 Structural Concrete (beams/girders), Class A, 28 Days Cu.m. 72.60 902(1)a Reinforcing Steel (deformed), Grade 40 Kgs. 45,065.92 903(2) Formworks And Falseworks Sq.m. 1,102.50 1000(1) Soil Poisoning Ltr. 177.48 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel), 100mm Sq.m. 381.28 1046(2)a2 150mm Chb Non-load Bearing (including Reinforcing Steel) Sq.m. 410.26 1047(8) Structural Steel (roof Framing) Bdft. 1,245.83 1014(1)b2 Prepainted Metal Sheets (rib Type, Long Span, Above 0.50mm) M 1,245.83 1013(2)a2 Fabricated Metal Roofing Accessory (flashings, Gauge 26)) M 157.80 1013(2)b1 Fabricated Metal Roofing Accessory (gutters, Gauge 26) M 52.50 1010(2)a Door (flush) Sq.m. 61.68 1007(1)b Aluminum Framed Glass Door (swing) Sq.m. 21.29 1011(1)a Roll-up Door Lumpsum 1.00 1008(1)a Aluminum Glass Windows (sliding) Sq.m. 31.43 1008(1)c Aluminum Glass Windows (awning) Sq.m. 4.32 1008(1)d Aluminum Glass Windows (fix) Sq.m. 6.59 1027(1) Cement Plaster Finish Sq.m. 1,267.24 1018(5) Glazed Tiles Sq.m. 301.00 1018(2) Unglazed Tiles Sq.m. 48.00 1003(1)a1 Carpentry (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 484.07 1003(1)e2 Carpentry (metal Furring Frame, Pre-painted Metal Panel) Sq.m. 221.27 1032(1)a Painting Works Sq.m. 2,907.48 1051 (1) Railing Lumpsum 1.00 1001(8) Sewer Line Works Lumpsum 1.00 1001(9) Storm Drainage And Downspout Lumpsum 1.00 1002(6) Cold Waterline Works Lumpsum 1.00 1002(4) Plumbing Fixtures Lumpsum 1.00 1001(6) Catch Basin (concrete) Each 10.00 1001(11) Septic Vault Lumpsum 2.00 1100(10) Conduit, Boxes And Fittings (conduit Works/conduit Rough-in) Lumpsum 1.00 1101(33) Wires And Wiring Devices Lumpsum 1.00 1103(1) Lighting Fixtures And Lamps Lumpsum 1.00 1202(6)a1 Fire Extinguisher Lumpsum 7.00 1208(1) Fire Alarm System Lumpsum 1.00 13. For Further Information, Please Refer To: Edmundo B. Desiderio Jr, Ce. Bac Sec Head-infrastructure Office Of The Municipal Engineer Vivian B. Pacis Bac Chairman-infrastructure Office Of The Civil Registrar 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps, Local Government Unit Of Conner, Apayao]

Details: Description Republic Of The Philippines Department Of Public Works And Highways Bohol 3rd District Engineering Office Guindulman, Bohol, Region Vii Invitation To Bid November 11, 2024 1. The Department Of Public Works And Highways – Bohol 3rd District Engineering Office, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts: Name Of Contract : Organizational Outcome 1: Ensure Safe And Reliable National Road System – Network Development Program – Road Widening - Secondary Roads - Jct (ter)-jagna-sierra Bullones Rd - K0067 + 527 - K0068 + 000, K0080 + 000 - K0080 + 364 Contract Id No. : 25hb0040 Location : Jagna, Bohol Scope Of Works : Construction Of Roads (road Widening) Approved Budget For The Contract : Php 34,209,840.00 Contract Duration : 195 C.d. Source Of Fund : Gaa Fy 2025 Name Of Contract : Convergence And Special Support Program – Sustainable Infrastructure Projects Alleviating Gaps (sipag) – Access Roads And/or Bridges From The National Road/s Facilities – Construction Of Casuwayan Bridge, Barangay Casbu, Guindulman, Bohol Contract Id No. : 25hb0041 Location : Casbu, Guindulman, Bohol Scope Of Works : Construction Of Bridge Approved Budget For The Contract : Php 29,400,000.00 Contract Duration : 257c.d. Source Of Fund : Gaa Fy 2025 Name Of Contract : Convergence And Special Support Program – Special Road Fund – Motor Vehicle User’s Charge (mvuc) As Per R.a. 11239 – Installation/application Of Road Safety Facilities (roadway Lighting) Along The President Carlos P. Garcia Circumferential Rd – K0195 + 000 – K0197+000, K0199+500 – K0200+710 Contract Id No. : 25hb0042 Location : Jagna, Bohol Scope Of Works : Installation/application Of Road Safety Facilities (roadway Lighting) Approved Budget For The Contract : Php 19,517,680.00 Contract Duration : 75 C.d. Source Of Fund : Gaa Fy 2025 Name Of Contract : Convergence And Special Support Program – Basic Infrastructure Program (bip) – Multi-purpose Buildings/facilities To Support Social Services – Construction Of Multi-purpose Building, Sevilla, Bohol Contract Id No. : 25hb0043 Location : Cambagui, Sevilla, Bohol Scope Of Works : Construction Of Multi-purpose Building (covered Court) Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 125 C.d. Source Of Fund : Gaa Fy 2025 Name Of Contract : Convergence And Special Support Program – Basic Infrastructure Program (bip) – Multi-purpose Buildings/facilities To Support Social Services – Construction (completion) Of Multi-purpose Building, Bilar, Bohol Contract Id No. : 25hb0044 Location : Barangay Subayon, Bilar, Bohol Scope Of Works : Construction Of Multi-purpose Building (covered Court) Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 125 C.d. Source Of Fund : Gaa Fy 2025 1. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B For C & D, Medium B For A. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. 2. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Dpwh Bohol 3rd District Engineering Office, And Inspect The Bidding Documents At Sawang, Guindulman, Bohol During Weekdays From 8:00am-5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13, 2024 To December 3, 2024 For Contract Ids No. 25hb0038 To 25hb0044 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. 6. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 7. The Dpwh Bohol 3rd District Engineering Office Will Hold A Pre-bid Conference On November 21, 2024 At 10:30am At The Bac Conference Room Bohol 3rd District Engineering Office, Which Shall Be Open To Prospective Bidders. 8. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bidding Documents. 9. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bohol3@dpwh.gov.ph For Electronic Submission On Or Before December 3, 2024 12:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 10. Bid Opening For Contract Ids No. 25hb0038 To 25hb0044 Shall Be On December 3, 2024 2:00pm At Bac Conference Room Bohol 3rd District Engineering Office. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 11. The Dpwh Bohol 3rd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Bidders Shall Pay The Bac An Applicable Fee Of Php50,000.00 For Contract Ids No. 25hb0038 & 25hb0039; Php25,000.00 For Contract Ids No. 25hb0040, 25hb0041 & 25hb0042; Php5,000.00 For Contract Ids No. 25hb0043 & 25hb0044 For The Bidding Documents, Upon Securing Hard Copies Of The Documents. Bidders That Downloaded The Documents From The Dpwh/philgeps Website Shall Pay The Fee Upon Submission Of Their Bids. Any Request For Additional Information Concerning This Bidding Shall Be Directed To The Following: Bac Chairperson : Juanito A. Olaño Bac Secretariat Head : Marcela B. Dalen Address : Dpwh Bohol Iii Deo Address : Dpwh Bohol Iii Deo Guindulman, Bohol Guindulman, Bohol Telephone No. : 038-411-5027 Telephone No. : 038-411-5027 Email Address : Dpwh_bohol3rd@yahoo.com.ph Email Address :dpwh_bohol3rd@yahoo.com.ph Approved By: Juanito A. Olaño Bac Chairperson

Details: A new rescue station with a vehicle hall with two parking spaces is being built on the property in the industrial estate in 15936 Dahme/Mark. The two-storey new building, which does not have a basement, has a floor plan of approx. 54.80 m by 10.86 m. The total height of the building is between approx. 4.5 m and 6.95 m. The rescue station is being built using solid construction. A green flat roof with a photovoltaic system is planned as the roof. The building can be divided into two parts: the two-storey vehicle hall and the surrounding functional rooms, as well as the single-storey lounge area. The two parts are visually separated from one another by their facade design. The vehicle hall has a curtain metal facade, while the lounge area has an outer shell made of exposed brickwork. The OKFF Eg is 86.70. The ground level in the adjacent area is relatively flat and is around 86.10 Dhhn2016 and in some places higher. The former existing subsoil of the area being worked on was replaced during the foundation work by the building construction and filled with compactable natural material. The average heights of the surrounding public roads are between 86.40 - 86.90. Differences in height to the neighboring metalworking shop, in some places the trench area and the adjacent long property are compensated with an additional retaining wall, along which the property fence runs.