Vehicle Tenders
Vehicle Tenders
DEPT OF THE AIR FORCE USA Tender
United States
Closing Date24 Feb 2025
Tender AmountRefer Documents
Details: Update: 04/27/2020 - Aoi #2 And #3 Have Been Added To This Notice. Please Reference Attachments For Information. update: 2/25/2020 An Aoi Has Been Added To This Notice. Please Reference Attachments For Information. section 1 – Introduction
under The Authority Of 10 U.s.c. 2371b The Agility Prime Office Is Pursuing Prototype Projects From Nontraditional And Traditional Defense Contractors. These Projects Will Help The Government Assess The Transformative Vertical Flight Market And Vertical Takeoff And Landing (vtol) Technologies. This Effort Seeks To Establish A Collaborative Strategy With Industry And Investors That Accelerates Fielding Of The Most Promising Technologies For Savings And Utility To The Government, As Well As Potential Commercial Market Success. As These Systems Mature Toward Certified Commercial Operations, The Government Will Identify Opportunities For Early Adoption, With The Potential For Procurement And Fielding In The Next Three Years. the Core Technologies Of Interest Include Emerging Electric Vtol (evtol) And Urban/advanced Air Mobility (uam/aam) Aircraft, Although Alternatives Will Be Considered. These Aircraft May Incorporate Non-traditional Electric Or Hybrid Propulsion For Manned Or Optionally Manned Missions, With Onboard Pilot, Remote Pilot, Or Autonomous Control. Based On Emerging Commercial Trends, These Transformational Commercial Vehicles Are Typically Characterized By Employment Of Distributed Propulsion For Vertical Flight And Potential Use Of A Wing For Horizontal Flight, Along With Augmented Flight Control Systems, And High Levels Of Automation Or Autonomy. Besides Aircraft, This Effort Will Consider Similar Support To Enabling Technologies. during This Opening, The Government Intends To Test The Hypothesis That, Compared To Other Ground And Air Vehicles, These Aircraft Could Revolutionize Mobility Given: 1) Lower Maintenance Cost And Time, Through Mechanical Simplicity; 2) Improved Safety And Declining Personnel Demands, Using Autonomy; 3) Affordable Quantity, Based On Potential Mass Production; 4) Improved Acoustics, Employing Distributed Propulsion; And 5) Greater Flexibility And Reduced Infrastructure Needs, With Runway Independence. To Mitigate Risk, This Hypothesis Will Initially Be Tested Outside Of The Urban Environment In Scenarios That Could Potentially Open A Broad Public-use Market For Early Government Adoption Prior To Civil Certification In A Way That Accelerates Uam. Modularity Similar To A Satellite Bus Or Universal Serial Bus (usb) Could Enable Vast Use Cases. These Vehicles, Referred To As Orbs, Are Not Drones, Cars, Helicopters, Trucks, Airplanes, Motorcycles, Or Suvs, But Might Support Similar Missions. Given Their Flexibility, An Orb Could Act As An Organic Resupply Bus For Disaster Relief Teams, An Operational Readiness Bus For Improved Aircraft Availability, And An Open Requirements Bus For A Growing Diversity Of Missions. Orbs Could Enable Distributed Logistics, Sustainment, And Maneuver, With Particular Utility In Medical Evacuation, Firefighting, Civil And Military Disaster Relief, Installation And Border Security, Search And Rescue, And Humanitarian Operations.
this Effort Expands On What Has Thus Far Been A Fruitful But Ad Hoc Engagement With Industry In This Sector Through The Following Path: 1) Requesting Details Regarding Planned Commercial Technologies And Markets; 2) Identifying Technologies That Are Likely To Result In Successful Prototypes; 3) Creating Opportunities For Collaborative Test Planning With The Potential Of Offering Test Assets And Expertise; 4) Leveraging This Campaign For Near-term Government Airworthiness Authorization As Well As Procurement Of Hardware, Software, Data, Or Services. The Intent Is To Accelerate Certification, While Also Assessing The Value Of Early Adoption And Fielding. Near-term Government Use-cases Could Occur Prior To Civil Certification And Might Provide Revenue And Data To Help Accelerate Even Broader Adoption And Technology Development. other Transaction For Prototype (otp)
the United States Government (usg) May Choose To Award One Or More Otps As A Result Of This Opening, Depending On Evaluations And Funds Availability. In Such Cases, An Other Transaction For Prototype (otp) Agreement, In Accordance With 10 U.s Code 2371b, Will Then Be Negotiated For Prototype Project Delivery, Based On The Selected Solution Brief(s). If The Parties Intend, Upon Successful Completion Of The Prototype Project, To Enter Into A Follow-on Production Agreement Without Further Competition Using 2371b Authority, All Such Follow-on Production Agreement Terms Must Be Negotiated Prior To Execution Of, And Included Within, The Original Otp. Alternatively, Upon Successful Completion Of A Prototype Project Under The Original Otp, The Government And Successful Submitter May Subsequently Solicit And Negotiate Follow-on Far Based Contracts, Or Merely Negotiate Such Contracts, If Sufficient Justification Exists For Sole Sourcing. Follow-on Production Agreements May Include, But Are Not Limited To, Further Prototyping, In-kind Testing, Production, And Fielding As Launch Customer. the Otp Must Satisfy At Least One Of The Following Conditions: there Is At Least One Nontraditional Defense Contractor Or Nonprofit Research Institution Participating To A Significant Extent In The Prototype Project. all Significant Participants In The Transaction Other Than The Federal Government Are Small Businesses (including Small Businesses Participating In A Program Described Under Section 9 Of The Small Business Act (15 U.s.c. 638)) Or Nontraditional Defense Contractors. at Least One Third Of The Total Cost Of The Prototype Project Is To Be Paid Out Of Funds Provided By Sources Other Than Other Than The Federal Government. the Senior Procurement Executive For The Agency Determines In Writing That Exceptional Circumstances Justify The Use Of A Transaction That Provides For Innovative Business Arrangements Or Structures That Would Not Be Feasible Or Appropriate Under A Contract, Or Would Provide An Opportunity To Expand The Defense Supply Base In A Manner That Would Not Be Practical Or Feasible Under A Contract. opening Procedure And Participation
this Opening Is A Competitive Solicitation, Continuously Open Until February 24 2025, Which Provides The Authority And Background For A Series Of Future Areas Of Interest (aois—see Definition In Section 2 Below) Requesting Solution Briefs And Proposals For New Solutions Or Potential New Capabilities That Fulfill Objectives, Close Capability Gaps, Or Provide Potential Technological Advancements In The Area Of Transformative Vertical Flight. The Government Reserves The Right To Award Other Transactions For Prototype (otp) Under The Authority Of 10 U.s.c. 2371b As A Result Of This Opening, If Deemed Appropriate, Based On Information Learned About This Field In The Course Of This Offering, Funds Availability, And In Accordance With The Procedures Herein, But The Government Is Not Required To Make Any Award, Unless The Government, In Its Sole Discretion, Deems Such Award Appropriate. “prototypes” Under This Legal Authority May Include Not Only Commercially Available Technologies Fueled By Commercial Or Strategic Investment That Result In Novel Applications For Defense Purposes, But Also, Among Other Things, Prototype Demonstrations, Agile Development Activities That Can Incrementally Improve Commercial Technologies That Then Become Available As Novel Defense Applications, Combinations Of These With Existing Government-owned Capabilities, Or Common Practices Newly Applied For Broad Defense Application(s). The Specific Level Of Support For Each Problem Statement Will Be Enumerated In The Aoi When Published. Please Note: This Opening Is Not Itself A Request For Solution Briefs Or Proposals. Aois Will Be Released In One Or More Separate Documents. otps Entered Into As A Result Of This Opening Shall Be Firm Fixed Price. besides Aircraft, These Aois Could Include But Would Not Be Limited To: Autonomy; Advanced Aircraft Materials And Manufacturing; Novel Acoustics Techniques; Subsystem, Aircraft, And Portfolio Design Tools; Rapid Mission Planning For Dense Air Environments And Logistics Efficiencies; Command And Control Of Air Vehicles; Robotic Landing Gear; Large Flotation Devices; Modular Payload Designs; Air Vehicle Data Networks And Rf Waveforms; Sense And Avoid Architectures, Algorithms, And Sensors; Electrical Power Storage, Generation, Charging; Alternative Onboard And Ground-based Electrical Power Generation; Distributed Electric Propulsion Control Techniques.
this Opening Outlines The Processes And Procedures Whereby Solicit Solution Briefs May Be Submitted In Response To Aois. Aois Are Focused Topic Categories That Will Be Published Separately And Posted To Https://beta.sam.gov. All Solution Briefs Submitted In Response To An Aoi Will Be Considered To Be Made In Response To And Governed By This Opening. The Opening Outlines The Procedures To Submit A Response To An Aoi To Ensure A Competitive Process That Consists Of Three-phases: phase 1 Solution Briefs: Shall Be Submitted As Specified In Section 3.2 Of This Opening. phase 2 Company Engagement: Submitters With Solution Briefs That Satisfy The Aoi Will Be Evaluated And If Found To Be Of Merit May Be Invited To An Engagement Session, Subject To Availability Of Government Funds, Following The Instructions Provided In Section 3.3 Of This Opening, Or Schedule An Engagement With The Government To Provide Further Details On The Aoi. phase 3 Request For Prototype Proposal (rpp): Those Submitters Whose Solution Brief And/or Site Visit Is Found To Satisfy The Aoi, May, Subject To Availability Of Government Funds, Be Invited To Submit A Full Written Proposal Following The Instructions Provided In Section 3.4 Of This Opening For Potential Award Of An Otp For A Prototype Project (see Definition Below). the Government May Publish Aois At Any Time. Interested Submitters Should Check Https://beta.sam.gov For New Aoi Postings Under This Announcement. full Announcement Details On This Ico Are Located In The Attachments Section.
DEPT OF THE ARMY USA Tender
Aerospace and Defence
United States
Closing Soon9 Jan 2025
Tender AmountRefer Documents
Details: ***sources Sought Amendment 001*** the Purpose Of This Sources Sought Amendment Is To Post Responses To Vendor Questions. All Other Information Remains Unchanged Including The Response Date. *** this Is A Request For Information (rfi) Only. This Rfi Is A Request For Informational Purposes Only And Does Not Constitute An Invitation For Bid (ifb), Request For Quotation (rfq), Or Request For Proposal (rfp). This Rfi Does Not Constitute A Commitment By The U.s. Army To Procure Products Or Services. The Government Does Not Intend To Award A Contract On The Basis Of This Rfi Or Otherwise Pay For The Information Solicited. Information Submitted In Response To This Rfi Is Submitted At No Cost To The Government And Will Not Be Returned. Any Exchange Of Information Shall Be Consistent With Procurement Integrity Requirements, And All Appropriate Proprietary Claims Will Be Protected To Prevent Improper Disclosure. your Response To This Rfi Is Voluntary And Will Be Treated Only As Information For The Government To Consider. No Funds Have Been Authorized, Appropriated, Or Received For This Effort. The Army May Use The Information Provided To Develop Its Acquisition Strategy. If A Solicitation Is Released For The Supplies Or Services Described Herein, It Will Be Synopsized On Sam.gov. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Potential Requirement. the Us Government Is Conducting Market Research For The Rapid Development, Deployment, And Continued Support Of The Us Army Mobile Low, Slow, Small Unmanned Aircraft System (uas) Integrated Defeat System (m-lids). Current M-lids Systems Consist Of Coyote Missiles With Launchers, A 30 Mm Cannon, A .50 Caliber Gun, An M240 7.62mm Crew Served Weapon, An Electronic Warfare (ew) System, An Electro-optical/infrared (eo/ir) Camera And A Ku-band Radio Frequency System (kurfs) Radar Under The Control Of A Forward Area Air Defense Command And Control (faad C2) System Mounted On A M-atv Vehicle. Future Variants Will Be Configured On A Single Vehicle Such As Stryker. All Variants Will Be Capable Of Identifying And Defeating Group 1 Through Group 3 Uas Threats. The System Shall Be Capable Of Integrating Additional Sensors And Effectors. background: The Us Army Has A Need To Develop, Produce, And Maintain Countermeasures Against Enemy-armed And Intelligence Gathering Uas's Operating At Various Speeds And Altitudes Which Are Targeting Both Us And Their Allies’ Interests At Home And Abroad. interested Firms Who Believe They Can Provide The Below Described Efforts Are Invited To Indicate Their Interest By Providing The Following Information To The Contract Specialist Listed Below: 1. Company Name, Company Address, Overnight Delivery Address (if Different From Mailing Address, Cage Code, Point Of Contact, E-mail Address, Telephone Number, Fax Number. 2. Business Size (i.e. Large, Small Disadvantaged, Veteran Owned, Woman Owned, Etc.) 3. Affirmation Of Cleared Personnel And Facilities. 4. A Description Of The Company's Expertise In Providing Manufacturing Expertise And Producing Hardware As Described Below. 5. The Company's Experience In Meeting Contractual Due Dates For Similar Type Efforts. 6. Naics Code 334511 all Responses Shall Be Unclassified. all Assumptions, Including Any Assumed Government Support, Shall Be Clearly Identified. All Proprietary And Restricted Information Shall Be Clearly Marked. interested Sources Shall Have Sufficient Logistics, Engineering, And Other Expertise To Provide All Facets Of Development, Production, And Support For The Army’s M-lids System With The Aid Of A Partial Level Ii Technical Data Package (tdp) That Is In The Format Of The Developing Contractor. Portions Of The Technical Data Are Proprietary, And Portions Are In Contractor Format. The Government Will Not Provide A Tdp In Response To This Posting. the Interested Source Shall Be Capable Of Providing Coverage, Starting Approximately January 2026, For The Following At Contract Award: 1) Maintenance And Repair For Us Army Outside The Continental United States (oconus) And Continental United States (conus) M-lids Systems Of All Variants. 2) Personnel Capable Of Maintaining And Repairing Systems To Meet The Programs Operational Availability Requirements To Multiple Conus And Oconus Sites. 3) Training For Operators And Maintainers. 4) Obtaining Spare And Repair Parts And Providing Them To Conus And Oconus Sites. The Interested Source Shall Be Capable Of Maintaining And Repairing More Than 30 Systems. the Interested Source Shall Have Sufficient Engineering Expertise To Support The Integration Of The Overall System As Well As Provide Development Activities For The Counter-uas (c-uas) And Counter-improvised Explosive Device (c-ied) Electronic Warfare Systems (without A Tdp) In Accordance With United States Government (usg) Requirements. The Development Activities Will Include Both Hardware And Software Capabilities. The Interested Source Shall Possess Or Have Access To A Facility Capable Of Testing Capability At The System And Component Level. The Interested Source Shall Have The Capability Of Identifying Obsolescence In The Components And Provide The Usg With Proposed Replacements Or Redesigns. The Interested Source Shall Provide The Usg With Solutions To Allow The M-lids System To Be Exportable. the Interested Source Shall Have The Capability To Produce, Integrate And Perform Acceptance Test Of The M-lids System Iaw Usg Requirements. The Interested Source’s Production Facility Shall Have Iso 9001 Certification. Naics Code For This Requirement Is 334511. The Estimated Production Requirement Is 70 Systems Over Five Years. this Procurement Requires The Interested Source To Operate As A Us Corporation With A Secure Manufacturing Facility Approved To The Secret Level By The Defense Security Service (dss). Further, The Defense Contract Management Agency (dcma) Will Be Asked To Conduct A Pre-award Survey Of The Firm's Facility To Determine The Capability To Successfully Fulfill The Requirements Of This Contract And To Minimize Risk To The Product Manager, Counter Unmanned Aircraft System (pdm Cuas) Office. this Rfi Will Close 30 Days From The Date Of Posting. All Questions And Responses Should Be Directed To The Contracting Officer/contracts Specialist.
Lancashire County Council Tender
Transportation and Logistics
United Kingdom
Closing Date29 Dec 2029
Tender AmountEUR 140 Million (USD 143.8 Million)
Details: Lancashire County Council Procure Local And School Bus Services In Lancashire. The Transport Services Are Arranged And Funded By Lancashire County Council. In Addition The Services Include Local Bus Services Across The County And Into Adjoining Local Authority Areas That Are Complimentary To Bus Services Provided On A Commercial Basis And The Provision Of Home To School Journeys Within Lancashire And Surrounding Areas. It Is The Authority's Intention To Operate A Dynamic Purchasing System (dps) For The Future Provision Of These Services. The Dps Will Be Split Into Two Categories: - Category One - Local Bus Services And Category Two - School Bus Services To Be Appointed Onto The Dps Suppliers Must Hold Specific Operator Licences For Psv Transport Services And Meet Minimum Quality Standards Covering A Range Of Areas Including Insurance, Vehicles, Contract Standards, Driver Training And Appropriate Clearance And Customer Care. Services Are Developed By The Public And Integrated Transport Team And Are Let As Individual Contracts. These Are Tendered By Way Of A Mini-competition Between The Appointed Suppliers. Further Information Including Details On How The Dps Will Operate, Terms And Conditions, Specifications, Pictorialuser Guides, The Selection Questionnaire Required To Be Completed When Requesting To Participate In The Dps, And Evaluation Award Criteria To Be Used To Award Contracts From The Dps Can Be Found On The Link Titled Provision Of Local Bus Services And School Bis Services In Lancashire - Dynamic Purchasing System Which Can Be Located On The Following Webpage: Www.lancashire.gov.uk/business/tenders-and-procurement/tenders/
Alberta Public Sector Tender
Security and Emergency Services
Canada
Closing Date31 Oct 2025
Tender AmountNA
Details: Are You A Contractor Interested In Working With Alberta Forestry, Parks And Tourism Wildfire Operations For The 2023 Fire Season? Agreements For Fireline And Mobile Equipment Are Now Available For The Upcoming Wildfire Season. The Forestry Division, Which Is Responsible For Wildfire Presuppression And Suppression Efforts In The Forest Protection Area (fpa) Of Alberta, Requires Contractors To Provide A Variety Of Fireline Equipment And Mobile Equipment With Operators To Assist With Said Efforts. Fireline Equipment Such As Bull Dozers, Excavators, Water Trucks, And All-terrain Vehicles Are Used On Wildfires In Activities Such As The Construction Of Fire Guard, Helipads, And Reclamation. Mobile Equipment Such As Tractor/trailers, Vans, And Hotshots Are Used To Transport Firefighters And Fireline Equipment. There Is No Guarantee Of Work Under The Terms And Conditions Of The Fireline And Mobile Equipment Agreement, And Contractors Are Placed On A Call Rotation List Within Their Forest Area. Contactors Must Supply Competent Operators For Each Piece Of Equipment Stated In Schedule “c” – Equipment List, And Ensure They Are Equipped Will The Appropriate Personal Safety Equipment. Equipment Shall Be Well Maintained And In Good Working Order Prior To Services Commencing., To Qualify For An Agreement, Contractors Must Provide Evidence Of A Valid Certificate Of Recognition (cor) Or Small Employer Certificate Of Recognition (secor), As Well As A Certificate Of Insurance (schedule “e”) Satisfying The Requirements Of The Agreement. Or Equivalent Certifying Program Recognized By The Alberta Workplace Health And Safety Partnerships Program. Payment Of Equipment Is Based On The Alberta Roadbuilders & Heavy Construction Association (arhca), Equipment Rental Rates Guide. For Equipment Not Described In The Arhca, The Alberta Wildfire Payment Regulation Will Apply.
Malvik Kommune Tender
Automobiles and Auto Parts
Norway
Closing Date31 Dec 2026
Tender AmountNOK 12 Million (USD 1 Million)
Details: Announcement of competition: Dynamic purchasing scheme municipal company cars Malvik municipality intends to enter into a dynamic purchasing scheme for leasing company cars in the municipality. It may also exceptionally in very special cases arise the need to purchase a company car. The client wants a scheme that will cover the need for own transport, As well as reduce climate and environmental impact. The client wants the future car fleet to be turned towards becoming more climate- and environment-friendly and optimally consist of as many zero-emission vehicles as possible. It is a requirement that the provider delivers a car and has a workshop in the clients immediate area. The immediate area is defined as the municipalities of malvik, Stjørdal and trondheim. A complete description of the procurement will be announced in the individual calls / mini-konkurransene.se competition basis for additional information. Click here https://permalink.mercell.com/141199459.aspx Information about subcontracts
This procurement is divided into subcontracts: No Languages such as offers or requests for participation can be submitted to
Norsk Eligibility Criteria : qualification requirements suitability to perform the professional activities, including requirements for registration in a business register, professional register or a trade register overview and brief description of terms: see tender documentseconomic and financial capacityoverview and short description of qualification requirements: see tender documentssee tender documentsminimal groundstraffic requirementssee competition description of qualification requirements: see tender documentssee tender documentsminimum requirements: see tender documentssee tender documentscontract termsinformation about employees responsible for carrying out the contact
DEPT OF THE ARMY USA Tender
Real Estate Service
United States
Closing Soon8 Jan 2025
Tender AmountRefer Documents
Details: The U.s. Government Currently Occupies Retail And Related Space In A Building Under Lease That Will Be Expiring. The Government Is Considering Alternate Space If Economically Advantageous. In Making This Determination, The Government Will Consider, Among Other Things, Theavailability Of Alternate Space That Potentially Can Satisfy The Government’s Requirements, As Well As Costs Likely To Be Incurred Through Relocating, Such As Physical Move Costs, Replication Of Tenant Improvements And Telecommunication Infrastructure, And Non-productive Agency Downtime. the Government Requires Afull-service Lease For: a Minimum Of 3170 Rentable Square Feet (rsf) And A Maximum Of 3893 Rsf Of Retail Office Space For A U.s. Armed Forces Career Center lease Term Not To Exceed Five (5) Years With Government Terminationrights located Within A Defined Delineated Area In American Fork, Ut. undesignated On-site Parking For Up To Seven (7) Government Vehicles Must Be Provided On A 24 Hours 7 Day A Week Basis offered Space Must Meet Government Requirements Per The Terms Of The Government Lease. interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. representatives Of Building Owners Must Include With Their Response To This Advertisement, The Following: exclusivity Agreement, representation Letter, listing Contract Or Other Executed Agreement Granting The Exclusive Right To Represent The Building Owner responses Are Due No Later Than 3:30/pm Pdt On 01/08/2025. Submissions Must Be Made Electronically (by Email) To The Following Point Of Contact:
Derry City And Strabane District Council Tender
Civil And Construction...+1Civil Works Others
United Kingdom
Closing Date17 Jan 2025
Tender AmountRefer Documents
Details: Derry City And Strabane District Council Seeks Tender From Suitably Qualified Contractors For Derg Active Public Realm Greenways Phase 2. This Tender Opportunity Comprises Of Works To The Diamond Area Of Castlederg Following The Successful Delivery Of Phase 1 Works And Additional Funding Now Being Made Available. Works Consist Of New High Quality Natural Stone Paving To Match New Refurbished Central Core Of The Diamond, Lighting, Seating, Signage Etc. The Diamond Public Realm Area Is In A Busy Town Centre Location With A One-way Traffic System Traversing All 3 Sides. The Existing Central Area Is Also Currently Used For Several Key Events Throughout The Year. Including Memorial Events, Parades, Christmas Lights Switch On, The Apple Fair, Markets, Etc. There May Be A Requirement For The Contractor To Facilitate, Where Safely Feasible, Some Of These Existing Events Within The Vicinity Of The Works Area. It Will Also Be Vital For The Successful Contractor To Establish Good Working Relationships With The Existing Town Centre Traders And Community, Whilst Maintaining Access To Existing Car Parking And Shops. The Contractor Will Also Be Required To Maintain Traffic Flow Around The Diamond Along With Access For Emergency Vehicles And Translink Bus Services Etc. Works Are All To Include Refurbishment To The Castlepark Entrance Including Improvements Car-parking, Street Furniture, Landscaping And Signage Improvements. It Is Anticipated That Sectional Completion For These 2 Elements Of The Works Will Be Incorporated Into The Itt Documents. Please Refer To The Cft Documents For Further Detail.
Lancashire County Council Tender
Transportation and Logistics
United Kingdom
Closing Date31 Dec 2029
Tender AmountRefer Documents
Details: Lancashire County Council Procure Local And School Bus Services In Lancashire. The Transport Services Are Arranged And Funded By Lancashire County Council.in Addition The Services Include Local Bus Services Across The County And Into Adjoining Local Authority Areas That Are Complimentary To Bus Services Provided On A Commercial Basis And The Provision Of Home To School Journeys Within Lancashire And Surrounding Areas.it Is The Authority's Intention To Operate A Dynamic Purchasing System (dps) For The Future Provision Of These Services.the Dps Will Be Split Into 2 Categories:— Category 1: Local Bus Services, And— Category 2: School Bus Services.to Be Appointed Onto The Dps Suppliers Must Hold Specific Operator Licences For Psv Transport Services And Meet Minimum Quality Standards Covering A Range Of Areas Including Insurance, Vehicles, Contract Standards, Driver Training And Appropriate Clearance And Customer Care.services Are Developed By The Public And Integrated Transport Team And Are Let As Individual Contracts. These Are Tendered By Way Of A Mini-competition Between The Appointed Suppliers.further Information Including Details On How The Dps Will Operate, Terms And Conditions, Specifications, Pictorialuser Guides, The Selection Questionnaire Required To Be Completed When Requesting To Participate In The Dps And Evaluation Award Criteria To Be Used To Award Contracts From The Dps Can Be Found On The Link Titled Provision Of Local Bus Services And School Bus Services In Lancashire — Dynamic Purchasing System Which Can Be Located On The Following Webpage: Www.lancashire.gov.uk/business/tenders-and-procurement/tenders/
VETERANS AFFAIRS, DEPARTMENT OF USA Tender
Finance And Insurance Sectors
United States
Closing Soon8 Jan 2025
Tender AmountRefer Documents
Description: This Request For Information (rfi)/ Sources Sought Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. notice
this Rfi Does Not Constitute A Request For Quotation (rfq) Or A Promise To Issue An Rfq In The Future. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi. It Is The Responsibility Of The Responders To Monitor This Site For Additional Information Pertaining To This Requirement. Responses Or Questions Concerning The Composition And Requirements To The Rfi Will Not Be Returned. all Capable Contractors Are Welcome To Respond To This Notice And Shall Provide A Brief Capability Statement That Covers The Information In The Performance Work Statement. The Capability Statement Shall Be Limited To 10 Pages And No More Than 5mb. The Government Will Not Review Any Other Information Or Attachments Included, That Are More Than The 10-page Limit. The Government Will Not Review Generic Marketing Materials That Do Not Address The Information Contained Herein Or The Attached Documents. general
your Response Must Address Capabilities Specific To The Services Required In The Performance Work Statement And Must Include The Following: request Company Information To Include:
company Name
sam Cage/ Unique Entity Id Under Which The Company Is Registered In Sam.gov/vetbiz.gov
company Address
point Of Contact Name
telephone Number
email Address
socioeconomic Data
company Business Size Status And Representations Of Your Business
general Pricing Of Your Products/solution. Pricing Will Be Used For The Purpose Of Market Research Only.
names And Types Of Current Federal Contracts And/or Contract Vehicles That Can Be Utilized For The Scope Of The Requirements. this Is Not A Request For Quotes Or Proposals. Department Of Veterans Affairs Anticipates The Award Of A One Year Firm Fixed Price Contract. Contract To Begin Date Is On March 1, 2025. The Naics Code Is 541380. all Interested Parties Shall Respond No Later Than 1/08/2025 3:00pm Est. Submit Responses To Via Email To Charles.willis@va.gov. Telephone Responses Will Not Be Accepted. statement Of Work background all Department Of Veterans Affairs (va) S Pathology And Laboratory Medicine Service Laboratories That Perform Testing On Patients Must Meet The Clinical Laboratory Improvement Act 1988 And Amendments (clia)1988 Requirements To:
ensure Reliability Of Patient Testing In The Laboratory, And
meet Accreditation Requirements
both The Regulations In The Clinical Laboratory Improvement Amendments Of 1988 (clia) And All Laboratory Accreditation Agencies Require Clinical Laboratories To Verify Performance Characteristics Of Quantitative Test Systems. Laboratories Must Verify Performance Claims When Introducing An Unmodified, Us Food And Drug Administration Cleared Or Approved Test System, And They Must Comply With Requirements For Periodic Calibration And Calibration Verification For Existing Test Systems. They Must Also Periodically Verify The Analytical Measurement Range Of Many Quantitative Test Systems.
external Linearity And Calibration Verification Program: As An Enhancement To The Internal Quality Control Program, To Ensure Reliability Of Patient Testing In The Laboratory, And To Maintain Accreditation Requirements, The Laboratory Must Subscribe To An External Linearity And Calibration Program That Meets Clia 88 Requirements For All Analytes For Which Linearity And Calibration Verifications Is Available.
continuing Education Programs: As An Continuing Education Requirement, Pathologist Are Required To Obtain Maintain Continuing Medical Education Hours Per Year. b. Scope the Overall Purpose Of This Requirement Is To Obtain A Contractor To Provide A Linearity And Calibration Verification Program For The Washington Dc Va Medical Center S Pathology And Laboratory Medicine Service To Meet Its Accreditation Requirements. This Contractor Must Also Be Able To Provide Continuing Education Programs To Meet The Required Medication Education Hours For Pathologist. c. Requirements the Calibration Verification And Linearity Program Should Provide Specimen Kits For All Tests. the Contractor To Provide An Established Event Calendar And/or Shipping Table That Identifies The Dates Of Each Shipment. the Contractor To Provide A Formal Evaluation Report For All Tests Submitted.
DEPT OF THE AIR FORCE USA Tender
United States
Closing Date30 May 2026
Tender AmountRefer Documents
Details: Sources Sought Synopsis# Fa8212-22-r-9999 upcoming Contract Opportunities: A-10 Spares Hill Afb 27apr2022 1. Notice: This Is Not A Solicitation But Rather, For Planning Purposes, A Sources Sought Synopsis (sss) To Seek Qualified Manufacturers By Informing The Public Of Upcoming Contracting Opportunities. Further, This Notice Is Provided To Promote And Encourage Early Submissions Of Source Approval Request (sar) If The Manufacturer Is Not Pre-qualified And Desire To Be. 2. Acquisition Type: Full & Open Competition To Qualified Manufacturers. 3. Requirement Description: **see Attachment** 4. Responses: Manufacturers Must Be Pre-qualified To Bid On The Requirement. If Interested, Please Submit A Source Approval Request (sar) Iaw The Source Qualification Statement Spares (sqss) That Is Also Posted With This Notice In Reasonable Time To Allow The Government To Process The Sar And The Offeror Can Submit A Full Bid On-time. Please Submit With The Sar A Copy Of The Higher Level Quality Requirement Certification As A Separate Attachment. The Sss/ Upcoming Contracting Opportunities Will Be Posted And Updated With New Opportunities Until 30may2026. Please Provide Responses To The Contracting Officer, Leslie Evans, At Leslie.evans.1@us.af.mil. Please Provide The Following Information In The Response; firm’s Name, Cage Code, And Duns Number, And Government Point Of Contact business Type (large Or Type Of Small) For Proposed Or Recommended Naics Code recommended Naics Code are You A Manufacturer Or Authorized Distributor For This Requirement Or Subparts? Please Note Bids From Distributors Will Not Be Considered. The Requirement Is A Production Contract To Manufacture Military Aircraft Parts. If The Requirement Is A Total Small Business Set-aside The More Than 50% Of The Work Must Be Performed By The Prime Qualified Small Business Or Subcontractor That Is A Qualified Small Business Under The Set-aside Naics Code Per The Small Business Non-manufacturer Rules And There Is No Waiver. Thus, Sar Packages And Bids From Distributors That Do Not Meet The Non-manufacturer Rules Will Not Be Considered. have You Manufactured Same Or Similar Parts To Include To Commercial Customers? If So, Please Provide Evidence Of With Point Of Contact(s), Contract Numbers, Results, Etc., To Demonstrate You Are Qualified Manufacturer That Deliver Quality Parts And The Govt Can Validate The Information. provide Any Anticipated Teaming Arrangements. Any Responses Involving Teaming Arrangements Should Delineate Between The Work That Will Be Accomplished By The Prime And The Teaming Partner(s). is There A Different National Stock Number (nsn) Or Suitable Part Number? is There An Existing Contract Vehicle The Usaf Can Order The Parts From? Is There A Dla Contract Or Gsa Schedule For The Parts? what Other Acquisition Strategy And Contract Type Do You Recommend And How Will This Provide The Government The Best Value? discuss Any Concerns That May Prevent Receiving Fair And Reasonable Pricing For The Out –years. 5. Technical Data Package (tdp) Access: To Access The Tdp Please E-mail The Contracting Officer At Leslie.evans.1@us.af.mil. Please Provide In The Request The Firm’s Cage So The Contracting Officer Can Verify The Firm Has An Active Dd Form 2345, Military Critical Technical Data Agreement.
8311-8320 of 8659 active Tenders