Valve Tenders

Details: Description 30 Bag Cement 9 Cu.m Sand 7 Cu.m Gravel G-1 500 Pcs Chb 4" 50 Pcs 10mm Dsb 40 Lm Rib Type Lm 1x4mx0.5mm 4 Pcs End Flashing 2 Pcs Box Gutter 300 Pcs Black Screw 6 Pcs Tubular 2x3x1.5mm 8 Pcs Tubular 2x2x1.5mm 10 Kilo Welding Rod 2 Set Pvc Door Complete Accessories 1 Set Flush Door Complete Accessories 1 Box Blind Rivet 8 Pcs Carrying Channel 1 Kilo Concrete Nail #1 1 Pcs Steel Drill Bit 1/8 5 Pcs Fiberboard Cement 1/4 2 Roll Mesh Tape 10 Pcs Metal Furring 20 Pcs Wall Angle 15 Pcs W-clip 2 Pcs Pvc Pipe S-1000 4" 2 Pcs Pvc Pipes-1000 2" 2 Pcs 1/8 Bendx4 2 Pcs 1/8 Bendx2 2 Pcs 1/4 Bend X3 2 Pcs Sanitary Tee 4x2 2 Pcs Sanitary Tee 2x2 2 Pcs 4x4 Wye 1 Pc Clean Out Plug 4" 3 Pcs Ppr Pipe S-40 1/2 2 Pcs Female Adapter 3 Pcs Elbow 1/2 3 Pcs Tee 1/2 1 Pcs Gate Valve 1/2 2 Set Lavatory Wall Hung 2 Set Water Closet 2 Pcs Faucet 3 Roll Teflon 2 Pc Drain Brass 4x4 2 Pail Flat Latex 2 Pail Semi Gloss Latex 5 Bag Skimcoat 2 Can Latex Color Assorted 2 Pcs Paint Roller With Handle 3 Pcs Paint Brush 4" 3 Pcs Paint Brush 3" 2 Pcs Paint Tray 30 Pcs Sandpaper #100 30 Pcs Sandpaper #120 2 Gal. Qde Assorted Color 2 Set Putty Knife

Details: Description The Basista Water District (baswad) Through Its Bids And Awards Committee (bac), Intends To Procure The Supply And Delivery Of Various Water Service Connection Materials (p.r. No. 2025-02-08) Through Section 53.9 (negotiated Procurement – Small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Sealed Quotation/s Duly Signed By You Or Your Duly Authorized Representative To The Address, Basista Water District, Magsaysay Avenue, Palma, Basista, Pangasinan Or By Electronic Mail At Basistawaterdistrict@yahoo.com Not Later Than 20th Day Of February, 2025 At 9:00 A.m. Opening Of Sealed Quotations Will Be At 9:15 A.m. On The Same Date At Baswad Office. The Following Documents Are Also Required To Be Submitted Along With Your Quotation Not Later Than The Specified Deadline Above: Copy Of 2025 Mayor’s Or Business Permit In Case Not Yet Available, You May Submit Your Expired 2024 Mayor’s Or Business Permit With The Official Receipt Of Renewal Application. Notarized Omnibus Sworn Statement (gppb Prescribed Form) Supported By Secretary’s Certificate Or Special Power Of Attorney, If Necessary. Income / Business Tax Return Philgeps Registration Copy Of Dti Or Sec Registration Certificate Authorization Letter If The Agency Will Send An Authorized Representative Signing The Price Quotation And/or Other Related Documents. For Any Clarification, You May Contact Us At Phone #s 09687754704, 09108756243 Or Email Address At Basistawaterdistrict@yahoo.com. Supply And Delivery Of Various Water Service Connection Materials (p.r. No. 2025-02-08). Minimum Technical Specifications Note: Non-compliance With The Minimum Required Specifications Shall Be Rejected. General Specifications Water Meter, ½ Brass 35 Pieces Adapter, ½ Brass, Standard 100 Pieces Gate Valve, ½ Brass, Standard 50 Pieces Nipple, ½ X 12 (gi), Standard 100 Pieces Nipple, ½ X 4 (gi), Standard 100 Pieces Elbow Reducer, ¾ X ½ (gi), Standard 50 Pieces Elbow, ½ (gi), Standard 100 Pieces Cap, ½ (gi) 50 Pieces Teflon Tape, ½ 200 Pieces Tubing, ½ (pe) 1 Roll Coupling, 2” (sleeve Type) 3 Pieces Delivery Requirement Must Be Delivered Within Fifteen (15) Calendar Days Upon The Receipt Of Purchase Order / Notice To Proceed.

Details: Description Republic Of The Philippines Province Of Negros Occidental Municipality Of Moises Padilla Project Reference Number: Name Of The Project: Location Of The Project: Request For Quotation Date: Quotation No. Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than February 10, 2025, 10:00am In The Return Envelope Attached Herewith. Jackielyn E. Miraflor Marilou M. Trespeces Executive Assistant Ii Municipal Treasurer Note: 1. All Entries Must Be Typewritten 2. Delivery Period Within___________ Calendar Days 3. Warranty Shall Be For A Period Of Six ( 6 ) Months For Supplies & Materials, One ( 1 ) Year For Equipment, From Date Ofacceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of _______________ Calendar Days 5. G-eps Registration Certificate Shall Be Attached Upon Submission Of The Quotation 6. Bidders Shall Submit Original Brochures Showing Certification Of The Product Being Offered Item No. Item & Description Qty. Unit Unit Price Total 1 One (1) Unit, Brand New Multi-purpose Vehicle, Pick-up Type, 1 Unit 2024 Model, 4x4 Manual Transmission, Upgraded, 2.4cc, 4 In-line 16 Valve Dohc Turbocharged & Intercooled, Direct Injection, Diesel; (4n16); 6 Speed Mt; Electronic Common Rail; Fuel Tank Capacity 75 Liters; Maximum Power 136ps; 205 R16 Tires 16x6. Ojj Steel Wheels; With 3 Spoke Urethane; Steering Wheel; With 2-din Single Dash Cd/mp3/wma/ Tuner/ipod-ready/ Audio Jack; 2 Speakers; Equipped Tilt Adjustment; Power Steering, With Anti-lock Braking System (abs); With Electric Brake-force Distribution (ebd); Dual Airbags; 5 Person Seating Capacity Inclusions: 1 Year Comprehensive Insurance 1 Year Tpl 3 Years Lto Registration Matting Seat Cover Early Warning Device Tint Stickers Steel Front & Rear Bumper Tires And Rims Brand Model: Delivery Period: Warranty: Price Validity: After Having Carefully Read And Accepted Your General Conditions, I/we Quote Your On The Item At Prices Noted Above. Printed Name/signature Tel. No./cellphone No. E-mail Address

Details: Description Request For Quotation Please Quote Your Price On The Job/item Listed Below, Subject To The Specification And Terms And Conditions Provided Herein, Stating The Shortest Time Of Delivery And Submit Your Quotation In The Bid Box Located At The Procurement Section, National Irrigation Administration, Regional Office 6, Tacas, Jaro, Iloilo City, Duly Signed By Your Representative, Not Later Than 5:00 P.m. Of January 30, 2025. Failure To Observe Any Of The Herein Terms & Conditions Shall Be At The Risk Of The Bidder Concerned. (sgd) Angeles A. Pahayahay Bac Chairman □ 1. All Entries Must Be Printed; □ 2. Bidders Must Submit Philgeps Registration No. □ 3. Place This Rfq In A Sealed Envelope And Type The Following Details On The Face Of The Envelope; Your Company Name Pr No. Philgeps Reference No. □ 4. Delivery Period Must Be At Least Within Seven (7) Calendar Days Upon Receipt Of P.o. Otherwise Bidder Should Specify/indicate Delivery Date; □ 5. Item/s Delivered Must Have Warranties For Unit Replacements, Parts, Labor Or Other Services; □ 6. Price Validity Shall Be For A Period Of Three (3) Months; □ 7 Quoted Prices Must Be Inclusive Of Taxes, And Other Charges Or Fees And Shall Not Exceed The Approved Budget For The Contract (abc); □ 8. Transaction With Nia-jrmpii Shall Mean Compliance By The Winning Bidder With The Bid And Delivery Requirements Before The Issuance Of Check Payment; □ 9. Failure To Comply With These Conditions Shall Mean Disqualification Of Your Bid/proposal; Item No. Brand/model Warranty (if Applicable) Quantity Unit Unit Price 1. Piston, Aps 1 Set 2. Piston Ring, Aps 4 Sets 3. Main Bearing, Aps 1 Set 4. Conrod Bearing, Aps 1 Set 5. Valve Seal, Aps 1 Set 6. Liner (cylinder), Aps 1 Set 7. Oil Cooler, Aps 1 Set 8. Water Pump, Aps 1 Set 9. Egr Assy., Aps 2 Set 10. Throttle Body Assy., Aps 1 Pc 11. Overhualing Kit, Aps 1 Pc 12. Truss Washer Bearing (crankshaft), Aps 1 Set *****nothing As Follows***** Note: Item #9 For Use Of 2 Units Colorado Pick-up W/plate No: Sjl-317, Sjl-324 Note: Subject To 5% Vat & 2% Ewt/ Cwt Deduction As Per Ra9337 Total Bid Price In Words And Figures: After Having Carefully Read And Accepted The Attached Terms And Conditions, We Are Submitting The Above Mentioned Price Quotation.

Details: Description The Tupi Water District's Bids And Awards Committee (bac) Would Like To Invite Interested Parties To Submit Their Quotation For The Supply And Delivery Of Various Materials For 10cu.reservoir At Brgy. Cebuano Terms And Conditions 1. Quoted Prices Must Be Inclusive Of Required Tax; 2. All Quotations Shall Be Firm And Valid For A Period Of At Least Thirty (30) Days From The Date Of Receipt Of Quotation And Shall Be Binding Upon The Supplier Within The Period; 3. Tupiwd Reserved The Right To Post-qualify Any Supplier And/or To Reject Any Or All Submitted Quotations. 4. Purchase Order/contract Shall Be Awarded To The Lowest Evaluated Responsive Bid; Delivered Items Are Subject To Inspection, With Payment Processing To Commence Only After Acceptance By The Property Control Personnel Of 5. Payment Term: Payment Is Within One Hundred Eighty (180) Days From The Date Of Inspection/acceptance Of Items/goods. Requirements To Be Submitted With The Quotation 1. Valid Certificate Of Philgeps Registration 2. Valid Business Permit 3. Tax Clearance Certificate No. Description Qty. Unit Unit Cost Total 1 Portland Cement 80 Bag 2 Sand(3cu.m.) 2 Load 3 Gravel(3cu.m.) 2 Load 4 Sahara Cement Water Proofing Compound 80 Pc 5 Wire Mesh #16 (½ X 4' X 22m) 4 Roll 6 10mmø X 6m Deformed Bar 32 Pc 7 #16 G.i Tie Wire 7 Kg 8 Marine Plywood (¼") 4 Pc 9 2x3x10 Coco Lumber 350 Bd.ft. 10 Cwnail (4") 4 Kg 11 Cwnail (2") 2 Kg 12 4" Chb 150 Pc 13 Semi Gloss Latex Paint 5 Gal. 14 4" Paint Brush 4 Pcs 15 4" Paint Roller 1 Pcs 16 Paint Roller Tray 1 Pcs 17 Skim Coat 4 Bag 18 Paint Latex Thalo Blue 8 Pints 19 Sandpaper #80 5 Pcs 20 Sandpaper #1000 5 Pcs 21 2" Ø Gi Pipe (6m) Sch.40 3 Pc 22 2" Ø Gi Elbow 7 Pc 23 2" Ø Brass Gate Valve 2 Pc

Details: Description Calibration Of Volumetric Pipettes 5ml 2 Piece Calibration Of Volumetric Pipettes 10ml 2 Piece Calibration Of Volumetric Pipettes 25 Ml 2 Piece Calibration Of Serological Pipettes 5 Ml 3 Unit Calibration Of Serological Pipettes 10 Ml 3 Unit Calibration Of Digital Bottle -top Dispenser W/ Recirculation Valve (5-50ml Capacity) 2 Unit Calibration Of Pipettor (0.1-2 Ul) 1 Unit Calibration Of Pipettor (10 Ul) 1 Unit Calibration Of Pipettor (2-20 Ul) 1 Unit Calibration Of Pipettor (5-50 Ul) 1 Unit Calibration Of Pipettor (10-100 Ul) 4 Unit Calibration Of Pipettor (20-200 Ul) 3 Unit Calibration Of Pipettor (100-1000 Ul) 4 Unit Calibration Of Multi-channel Pipettor (10-200 Ul) 2 Unit Calibration Of Volumetric Flask 25ml 3 Unit Calibration Of Volumetric Flask 50ml 3 Unit Calibration Of Volumetric Flask 100ml 3 Unit Calibration Of Volumetric Flask 1000 Ml 2 Unit Calibration Of Volumetric Flask 500 Ml 2 Unit Calibration Of Burette (50 Ml) 1 Unit Cleaning And Maintenance Of Microscope 5 Unit Calibration/preventive Maintenance Of Elisa Microplate Reader 1 Unit Calibration Of Uv-vis Spectrophotometer 1 Unit Calibration/preventive Maintenance Of Thermal Cycler (pcr Machine) 1 Unit Calibration Of Analytical Balance 2 Unit Calibration Of Top Loading Balance 3 Unit Calibration Of Ph Meter 3 Unit Calibration Of Refrigerator (≤4ºc) With Freezer (-20 ºc) 3 Unit Calibration Of Freezer (-20 ºc) 3 Unit Calibration/certification Of Fumehood 2 Unit Calibration/certification Of Laminar Flow Cabinet 1 Unit Calibration Of Test Weights Set - 12 Pcs/set ( 1 X 500g, 1 X 200g, 2 X 100g, 1 X 50g, 1 X 20g, 2 X 10g, 1 X 5g, 2 X 2g, 1 X 1g) 1 Set Note: *90 Days Delivery Period *provide Certificate Of Analysis/calibration/preventive Maintenance *calibration Lab Must Be Iso/iec 17025:2017 Accredited *supplier Must Have At Least Five (5) Years Of Metrology And Calibration Application Experience

Details: Description Standard Hand Tools Set Good Quality 5 Sets Crankshaft Pulley Holder (or Equivalent) 5 Pcs. Torque Wrench (range: 10-40 N-m) 5 Sets Torque Angle Gauge 5 Pcs. Micrometer Set (range: 0-25 Mm, 25-50 Mm, 50-75 Mm, 75-100mm) Accuracy: 0.01mm 5 Sets Micrometer Stand 5 Pcs. Bore Gauge Set (range: 15-60 Mm) Accuracy 0.01 Mm 5 Sets Bore Gauge Set (range: 50-160 Mm) Accuracy: 0.01 Mm 5 Sets Dial Gauge (accuracy: 0.01 Mm) W/ Magnetic Stand 5 Sets Compression Gauge, Universal (gas And Diesel) 5 Pcs. Vernier Caliper 5 Pcs. Feeler Gauge (staineles Blade) 5 Pcs. Straight Edge 5 Pcs. V-blocks 5 Sets Valve Spring Compressor 5 Pcs. Piston Ring Expander 5 Pcs. Piston Ring Compressor 5 Pcs. Mechanic Stethoscope 3 Pcs Ridge Reamer 2 Pc Honing 1 Set Oiler, 300ml Cap. 8 Pcs Steel Square, 8” 5 Pcs Inside Dial Caliper, 5-10mm 5 Pcs Inside Dial Caliper, 10-20mm 5 Pcs Radiator Pressure Tester 5 Set Belt Tension Gauge 5 Pc Thermometer, Service Type 5 Pcs Automatic Multi-tester Heavy Duty 6 Pcs Glass Beaker, 1l Cap. 4 Pcs Oil Pressure Gauge 5 Sets Flower –type Sockets Heavy Duty 5 Set Flower-type Deep Socket Heavy Duty 5 Set Allen Wrench 5 Sets Torque Wrench (range: 50-100 N-m) 5 Pcs Snap Ring Plier Heavy Duty 5 Pcs Pliers Heavy Duty 5 Set Screwdriver(phillip And Standard) Heavy Duty 5 Set Sparkplugwrench 5 Set Oilfilterwrench 5 Set Airhose Reel 2 Set Engine Oil Drain Bucket 1 Pc Gear Oil Pump 2 Unit Wedge(stopper) 6 Pcs. Trouble Light 5 Pcs. Service Creeper 5 Set ******nothing Follows*******

Details: Description Date: January 20,2025 Project Reference No: 25-01-0045 Quotation No. _________ Name Of Project: Procurement Of Various Spare Parts For The Repair & Maintenance Of Mitsubishi Strada Saa-6292, Alaminos City Location Of The Project: Alaminos City, Pangasinan Request For Quotation Dear Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions At The Dorsal Of This Rfq, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than January 27, 2025 At The Bids And Awards Committee Secretariat, 2nd Floor,bac Office, Alaminos City, Pangasinan. Open Quotations May Be Submitted, Manually Or Through Facsimile Or Email At The Address And Contact Numbers Indicated Below. Rowena F. Ruiz Bac Chairperson Special Instructions - (please Read Carefully) Note: 1. All Entries Must Be Typewritten 2. Delivery Period Within 10 Calendar Days 3. Warranty Shall Be For A Period Of Six (6) Months For Supplies & Materials, One (1) Year For Equipment, From Date Of Acceptance By Procuring Entity 4. Price Validity Shall Be For A Period Of 30 Calendar Days 5. Bidders Must Have Logged-in At Philgeps. (proof Of Log-in Must Be Attached) 6. Phil-geps Registration Number ______________________ 7. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered. 8. Approved Budget For Contract (abc) Php 85,878.00 Item No. Unit Item & Description Qty Unit Price Total Amount Set Idler Tensioner Bearing ( Big & Small) 1.00 - Set Bearing 1.00 Set Drive Belt Tensioner 1.00 Set Tensioner Adjuster 1.00 Set Rocker Arm 1.00 Pcs Valve Cup 2.00 Pc Rocker Arm Bolt 3.00 Pc Drive Belt 1.00 Pc Timing Belt Cover (lower) 1.00 Set Overhauling Basket 1.00 Set Timing Belt 1.00 - Total: - Brand And Model : Delivery Period : Warranty : After Having Carefully Read And Accepted Your General Conditions, I/we Qoute You On The Item At Prices Noted Above. Quoted By: - Printed Name/signature Tel. No. / Cellphone No. E-mail Address Date

Details: Description 5 Pcs Water Meter 1" W/ Tailpiece Specs: Meter Size (normal Diameter): 1" (25mm) Meter Type : Multi-jet Dry Dial, Magnetic Drive Accuracy Class : Brand New Class B-iso-4064,with Tail Piece Meter Body : Brass Corrosion Proof Meter Seal : Copper Wire And Lead Seal Serial Number : Marking Should Be Permanently Enclosed On External Surfaces Of The Meter Body Other Feature : Has Inside Or Outside Calibration Register Assembly : Vacuum Sealed, Straight Reading, 5 Digits Register, High Impact Glass Lens And Abrasion Resistant, Meter Registry In 10,000 Cubic Meter Anti-magnetic Mechanism, Anti-backflow/anti Reverse Mechanism With Central Star For Leak. Length : 260 Mm Width : 103.5 Mm Height : 124 Mm Connecting Thread : G11/4b Weight : 1.85 Kgs Max. Working Pressure : 16 Bar Max. Working Temparature : 50 Degrees Celsius Max Flow Rate (qmax) = 7000l/hr Normal Flow Rate (qn) = 3500l/hr Transitional Flow (qt) =280l/hr Min. Flow Rate (qmin) = 70l/hr Accuracy (qmax -qt) = +/-2% Accuracy (qt-qmin) = +/- 5% Other Requirements: Warranty - One (1) Year Period Warranty From Date Of Acceptance Catalog - Include Product Catalog/brochure 20 Pcs. Upvc Pipe 2" X 6m,s-10 With Rubber Ring 50 Pcs. C.i. Saddle Clamp 2" X 1/2" 5 Pcs. Brass Corporation Stop Cock 2" Clamp Type" 5 Pcs. C.i. Sleeve Type Coupling 2" 5 Pcs. C.i. Sleeve Type Coupling 4" 30 Pcs. Compression Fittings Elbow 1" 100 Pcs. Compression Fittings Union Coupling 1/2" 100 Pcs. Brass Female Ball Valve 1/2" With Lockwing 2 Rolls Hdpe Pipe 20mm (1/2") X 300m, Black Sdr 11 P.r. =160psi 2.0 Mm Thickness 10 Pcs. Rubber Gasket 2" For Stc 10 Pcs.rubber Gasket 3" For Stc 10 Pcs. Rubber Gasket 4" For Stc 10 Pcs. Rubber Gasket 6" For Stc 10 Pcs. Rubber Gasket 8" For Stc *****nothing Follows *****

Details: Description Submersible Pump And Motor, 7.5hp, 230v, 60hz, 1phase (kibanban ,matti,bria) W/ Control Box Motor Specification: -7.5hp,230v,with Control Box -ins Class F Ip68 -continous Duty -ul Us Listed -60hz,sf 1.15 -fe Exclusive Sand Fighter Sealing System -subtrol-plus Heat Sensor Equipped -full 3450 Rpm @60hz Design Point For Superior Pump & Flow Yield -full Rated Hp Output 30 Deg. C. Ambient -high Temperature Winding Wire Rated 180 Deg. C (354 Deg. F) -fe Fes91 Water Soluble Fill And Bearing Lubrication Solution Is Environmentally Safe - No Oil -fe Exclusive Water - Bioc Connection Allos The Lead To Be Replaced In The Field -copper Bar Rotors Provide More Consistent Performance That Other Designs -double Flange Design Increases Ease And Safety Of Handling The Motor And Mounting The Pump -steel/carbon Kingsburry-type Thrust Bearings Provide The Best Performance In Water Lubricated Motors -stainless Steel Shell Provides Corrosion Resistance -cast Iron Epocy End Frames Provide Durability -spring Shaft Provides Maximum Shaft/coupling Contact -spring Loaded Equalizing Diaphragm Provides Superrior Pressure Compensation Submersible Pump Q=8.3m3/h, H=156.2m,size Of Connetion/npt=1-1/2 Net Weight=17.3 Kg Rpm=3450 Pump :stainless Steel ,en 1.4301 ,aisi 304 Imepller :stainless Steel ,en 1.4301 ,aisi 304 General Specs Pump: - -15c..60 C Liquid Temperature Range - 20c Selected Liquid Temperature -density: 998.2 Kg/cu M. -built In Non Return Valve -corrosion Resistant, Aisi 304 Stainless Steel Inside And Out, 100% High- Grade Stainless Steel -wear Resistance,less Abrasive Wear: Octangonal Bearings And Sand Flush Channels -sand Resistance -fkm Rubber Parts (elastomer) -curve Grade 3b Standard,iso 9906:2012 **note: -one (1) Year Warranty Certificate Indicate Submersible Pump (repair And Replace) -certificate Of Parts Availability And After - Sales Service -delivery Time:30 Days Upon Receipt Of P.o.