Valve Tenders

Description: Contract notice – general guideline, standard rule open procedure (construction work) Diesterwegschule, heating installation Heating installation Diesterwegschule, heating installation Type and scope of work: The construction work involves the renovation and extension of the school consisting of an existing building as well as the construction of a new school building with two gymnasiums and a cafeteria. Number of floors: 7 full floors The following services are to be carried out: Heating installation: - 2 gas condensing boilers - 1 gas condensing combination device - 1 cascade with pump - 1 pressure maintenance station - 2 exhaust systems - 2 fresh water stations - Approx. 5470 m of pipes DN15 to DN100 - Approx. 876 various valves DN15 to DN80 - 21 high-efficiency pumps - 2 heating distributors - 27 heat meters - Approx. 5470 m thermal insulation - Approx. 618 m pipe bulkheads - 214 tubular radiators - 30 ceiling radiant heating panels

Details: Description The Zamboanga Peninsula Polytechnic State University Through Its Bids And Awards Committee (bac) Is Inviting Philgeps Registered Suppliers To Apply For Eligibility And To Submit Bids For The Items Listed Below: 1 Portland Cement, 40kg (710 Bags) 2 Coarse Sand (32 Cu.m.) 3 Gravel, ¾” Size (41 Cu.m.) 4 Fine Sand (18 Cu.m.) 5 Cement Water-proofing Compound, 1kg/bag (40 Bags) 6 Chb, 4” (4,365 Pcs.) 7 Rsb, 10mmø (585 Pcs.) 8 Rsb, 12mmø (190 Pcs.) 9 Rsb, 16mmø (180 Pcs.) 10 Dry Brickstone, Sorsogon (10.8 Sq.m.) 11 Concrete Neutralizer (10 Gals.) 12 Liquid Tile Primer (20 Gals.) 13 Patching Compound, 20kg (25 Bags) 14 Liquid Tile Top Coat, White (40 Gals.) 15 Baby Roller, Cloth (8 Pcs.) 16 Paint Roller, 6”, Cloth (8 Pcs.) 17 Paint Brush, 3” (8 Pcs.) 18 Waterproofing Paint, Gray (4 Gals.) 19 Pvc Sanitary Pipe, S1000, 4” (12 Pcs.) 20 Pvc Sanitary Pipe, S1000, 3” (5 Pcs.) 21 Pvc 90° Sanitary Elbow, 3” (8 Pcs.) 22 Wall Faucet Plain Bib, ½” X 6”, Stainless (7 Pcs.) 23 Wall Faucet Plain Bib, ½” X 4”, Stainless (6 Pcs.) 24 Wall Faucet Plain Bib, ½” X 2”, Stainless (18 Pcs.) 25 Stainless Floor Drain Main, 6” X 6” (13 Pcs.) 26 Stainless Floor Drain Main, 6” X 4” (2 Pcs.) 27 Pvc P-trap, S1000, 4”, Assembled (10 Pcs.) 28 Body Filler W/ Hardener (12 L) 29 Tee Reducer, 4” X 2” (20 Pcs.) 30 Pvc Elbow, 45°, 2” (10 Pcs.) 31 Pvc Tee, 4”, Sanitary (40 Pcs.) 32 Pvc Elbow, 90°, 4” (15 Pcs.) 33 Pvc Wye W/ Clean-out, 4”, 4” X 4” (10 Pcs.) 34 Ppr Pipes, Red Line, ½” (13 Pcs.) 35 Ppr Tee, ½” (40 Pcs.) 36 Ppr Elbow, ½” (50 Pcs.) 37 Solvent Cement, 400cc (2 Pcs.) 38 Water Closet W/ Trap, Flush Tank & Cover, White Porcelain (8 Sets) 39 Wall-mounted Urinal, White Porcelain, W/ Push Button Faucet Valve (7 Sets) 40 Surface Lavatories, Round & White, For Counters (7 Sets) 41 Cylindrical Knobset (4 Sets) 42 Sliding Barrel Flat Bolt, Stainless, 3” (8 Sets) 43 2-prong Universal Outlets (4 Sets) 44 Electrical Flexible Hose, 1/2” (60 M) 45 Electrical Tape, 16m, Big Size (4 Pcs.) 46 Junction Square Box W/ Cover (6 Pcs.) 47 Panel Board, 8 Branches (1 Set) 48 Utility Box (7 Pcs.) 49 Orbit Fan (2 Units) 50 Circuit Breaker, 30a (1 Pc.) 51 Circuit Breaker, 15a (2 Pcs.) 52 Led Downlight, White, 9w, 145mm X 145mm, 3 Colors (21 Pcs.) 53 Thhn Wire #12 (2 Boxes) 54 Thhn Wires #10 (1 Box) 55 2-gang Switch (2 Sets) 56 1-gang Switch (2 Sets) 57 4-gang Switch (1 Set) 58 Gi Tubular, 2” X 4” (20 Pcs.) 59 Stainless Zppsu Seal, 1.5m Ø (1 Set) 60 Fiber Cement Board, 3.5mm (40 Pcs.) 61 Double Metal Furring (145 Pcs.) 62 Cut-off Wheel Blade, 14” (4 Pcs.) 63 Angle Grinder Cutting Disc (20 Pcs.) 64 Mirror W/ Brown Aluminum Framing, 80cm H X 60cm W (1 Pc.) 65 Mirror W/ Brown Aluminum Framing, 80cm H X 200cm W (2 Pcs.) 66 Wall Angle, 0.4mm (35 Pcs.) 67 Filling Materials, No Boulders & Big Rocks (120 Cu.m.) 68 Door Bumper (4 Pcs.) 69 Stainless Toilet Signages, Male & Female (1 Pc.) 70 Stainless Toilet Signages, Male (1 Pc.) 71 Stainless Toilet Signages, Female (1 Pc.) 72 Stainless Toilet Signages, Pwd (1 Pc.) 73 Stainless Door Hinges, 3” X 3” X 2mm, Set Of 2 (8 Sets) 74 Stainless P-trap, For Lavatory (7 Sets) 75 Stainless Bidet, Chrome-plated, Spray (14 Sets) 76 Gi Welding Electrode (20 Kgs.) 77 Sanitary Pipes, S1000, 2” (12 Pcs.) 78 Louver-type Solid Panel Door, 1000 X 2100 X 40, Gloss Choco Brown (1 Set) 79 Louver-type Solid Panel Door, 700 X 2100 X 40, Gloss Choco Brown (1 Set) 80 Louver-type Solid Panel Door, 800 X 2100 X 40, Gloss Choco Brown (2 Sets) 81 Louver-type Solid Cafe Door, 500 X 1600 X 40, Gloss Choco Brown (7 Sets) 82 Door Jamb, Good Quality, 1m (1 Set) 83 Door Jamb, Good Quality, 0.7m (1 Set) 84 Door Jamb, Good Quality, 0.8m (2 Sets) 85 Door Jamb, Good Quality, 0.5m (7 Sets) 86 Stainless Flexible Hose, ½” X 12” (9 Pcs.) 87 Angle Valve, 2-way (8 Pcs.) 88 Angle Valve, Single (7 Pcs.) 89 Metal Single Robe Hook (12 Pcs.) 90 Stainless Steel Welding Electrode (5 Kgs.) 91 Non-slippery Porcelain Light Gray Tiles, 60” X 60” (197 Pcs.) 92 Glossy White Tiles, 30” X 60” (712 Pcs.) 93 Granite Slab, 60mm X 220mm (3 Pcs.) 94 Tile Adhesive, 25kg/bag (20 Bags) 95 Tile Grout, White, 2kg/bag (30 Bags) 96 Stainless Steel Tube, 2” Ø (12 Pcs.) 97 Stainless Steel Pipe Fitting, 90°, 2” Ø (12 Pcs.) 98 Pwd Stainless Grab Bar (3 Sets) 99 Awning-type Window W/ Analok Framing, 0.5m X 0.5m, Refer To Plan (8 Sets) 100 Awning-type Window W/ Analok Framing, 0.5m X 1.5m, Refer To Plan (4 Sets) 101 Common Wire Nails, 2”, 10kg/bag (2 Boxes) 102 Common Wire Nails, 3”, 10kg/bag (2 Boxes) 103 Common Wire Nails, 4”, 10kg/bag (3 Boxes) 104 Concrete Nails, 4”, 10kg/bag (1 Box) 105 Coco Lumber, 2” X 2” X 12’ (150 Pcs.) 106 Coco Lumber, 2” X 3” X 12’ (150 Pcs.) 107 Phenolic Board (20 Sheets) 108 Pvc Vertical Tank, 2000l (2 Pcs.) 109 Pvc Horizontal Tank, 1000l (1 Pc.) 110 Water Pump, 0.75hp (1 Set) 111 Bladder Tank, 20l (1 Set) 112 Pressure Gauge (1 Pc.) 113 Float Ball Valve (2 Pcs.) 114 Ppr Gate Valve, ½” (3 Pcs.) 115 Ppr Check Valve, ½” (4 Pcs.) 116 Double Float Suspension (3 Pcs.) 117 Ppr Pipe, ¾” Ø, Red Line (8 Pcs.) 118 Sanitary Coupling, 4” Ø (13 Pcs.) 119 Ppr Female Elbow, ½”, Metal Thread (45 Pcs.) 120 Ppr Coupling, ½” (25 Pcs.) 121 Ppr Ball Valve, ½” (2 Pcs.) 122 Ppr Ball Valve, ¾” (2 Pcs.) 123 Electric Impact Drill, Heavy-duty, Good Quality, 750w Min. (2 Units) 124 Angle Grinder, Heavy-duty, Good Quality, 710w Min. (2 Units) 125 Tie Wire #16 (50 Kgs.) 126 Glazing Putty (5 Gals.) 127 Flat Wall Enamel (10 Gals) 128 Enamel Quick-dry, White (10 Gals.) 129 Paint Thinner (5 Gals.) 130 Liquid Tile Tinting Color, Venetian Red, Full Tone (6 Pints) 131 Liquid Tile Tinting Color, Raw Sienna, Full Tone (6 Pints) 132 Liquid Tile Tinting Color, Hansa Yellow, Full Tone (6 Pints) 133 Liquid Tile Tinting Color, Bulletin Red, Full Tone (6 Pints) Note: For Details On Door & Window Dimensions & Specifications, Please Refer To The Pdmeo (project Development Management & Evaluation Office). ______________________________ Supplier’s Signature Over Printed Name The Schedule Of Bac Activities Is As Follows: 1. Pre-bid Conference - December 23, 2024, @ 10:00a.m. 2. Receipt And Opening Of Bids - January 6, 2025, @ 10:00a.m. 3. Bid Evaluation - January 7-14, 2025 4. Post-qualification - January 7-14, 2025 5. Issuance Of Notice Of Award - January 15, 2025 6. Contract Preparation & Signing - January 16, 2025 7. Issuance Of Notice To Proceed - January 16, 2025 The Criteria To Be Used For The Eligibility Check Of Prospective Bidders, Examination And Evaluation Of Bids, Post-qualification And All Matters To This Procurement Shall Be Under Republic Act No. 9184 (the Government Procurement Reform Act) And Its Implementing Rules And Regulations. Interested Bidders May Obtain Further Thank Important Notice To Bidders: 1. Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Of Five Thousand Pesos (p 5,000.00). It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 2. All Bidders Are Required To Post A Bid Security In The Form Of A Cash/bank Guarantee (2% Of Abc) Or Surety Bond (5% Of Abc) Or Bid Securing Declaration. 3. The Bidder Shall Prepare An Original Technical And Financial Proposal, Copy 1 And Copy 2. 4. State The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative In A Sealed Envelope. 5. Warranty Shall Be For Three (3) Months For Supplies And Materials. One (1) Year For Equipment From The Date Of Acceptance By The Procuring Agency. 6. All Erasures Must Be Initialed To Avoid Disqualifications. 7. Late Submission Of Bids Will Not Be Accepted. Approved By: (sgd.) Jocelyn P. Remoto Bac Chairperson The Zamboanga Peninsula Polytechnic State University Reserves The Right To Reject Any Or All Bids, Accept The Bid Most Advantageous To The Government, And Award The Contract By Lot.

Details: Description Stock No. Description Quantity Unit 1 Coaster 29-seater Diesel Manual Transmission 1 Unit Overall Dimensions Length X Width X Height (mm) 6,990 X 2,080 X 2,635 Wheelbase (mm) 3,935 Tread Front/rear (mm) 1,690/1,490 Minimum Turning Radius (m) 6.5 Curb Weight (kg) 3,530-3660 Gross Vehicle Weight (kg) 5,670 Engine Transmission Type 4 Cylinder In-line, 16-valve Ohv, Gear Drive Diesel Displacement (cc) 4,009 Maximum Output (ps/rpm) 135/2,500 Maximum Torque (nm/rpm) 390/1,400 Transmission 5-speed Manual Fuel System Common-rail Type Regulation Euro 4 Chassis Suspension (front) Double Wishbone (rear)leaf Spring, Rigid Stabilizers With (front, Rear) Brakes (front) Ventilated Disc (rear) Dual Two Leading Drum Steering System Power Assisted Recirculating Ball Tires And Wheels (front) 215/70r17.5 (rear) 215/70r17.5 3 Yrs. Lto Registration Free 1 Year Gsis Comprehensive Insurance Free

Details: Description Item No Description Qty Unit Unit Price Pr # Mp-200-2025-01-04 Nissan Dumptruck Sgl-644 Engine: Pf6t :model: Cwb450hdlt 1 Side Mirror 4 Pcs Grader Mg-330 Hidromek Engine: 6d16-tei: Model:mg-330 Hidromek 2 Side Mirror 4 Pcs 3 Gog Lamp Assembly 1 Set 4 Clearance Light 6 Pcs 5 Bolt 8mm 35 Pcs 6 Bolt 1/2" X 5 4 Pcs 7 Blade Guide 6 Pcs 8 Blade Washer 6 Pcs 9 Shir Pin 6 Pcs Isuzu Dumptruck Fv# 06 10 Fog Lamp Assembly 2 Pcs Backhoe Hitachi 11 Injector Test 6 Pcs 12 Injector Control Valve 6 Pcs 13 Nozzle Tip 4 Pcs Nissan Dumptruck Sgl-644 Engine:pf6t: Model:cwb450hdlt Supply Of Labor: 14 Build-up And Machining Release Bearing 1 Pc 15 Fabricate Hydraulic Hose 10" X 14 1 Pc 16 Radiator Assy. Overhaul 1 Set Abc: 199,261.00

Details: Description Ea Pressure Plate 1 Ea Air Cleaner Element 1 Ea Fuel Filter 1 Ea Oil Filter 1 Ea Glow Plug 4 Ea Radiator Fan Blade 1 Ea Radiator Clutch Fan 1 Ea Clutch Disc 1 Ea Release Bearing 1 Set Brake Shoe (rear) 1 Set Brake Pad 1 Pair Wiper Blade 1 Pcs Tie Rod End (ur) 2 Pcs Ball Joint Lower (ur) 2 Pcs Ball Joint (upper) 2 Set Brake Master Assy 1 Set Wheel Bearing Assy (front) 2 Pcs Cross Joint 2 Ea Cabin Filter 1 Kilo Freon Gas 2 Gal Urethane Thinner 4 Gal Body Filler 1 Ltrs Spray Filler 4 Ltr Rubbing Compound 1 Ea Buffing Pad 1 Pcs Masking Tape 3/4 30 Pcs Assorted Sandpaper 40 Kilos Freon Gas (134a) 2 Ea Aircon Receiver Drier 1 Ea Aircon Expansion Valve 1 Tin R-oil 1 Feet Pressure Hose 3/8 8 Pcs Tire Size #x 65r15 4 Pcs O-ring 8 Act Body Works 1

Details: Description 1 Unit Motorcycle Engine Type 4-stroke. 2-valve. Sohc. Esp Displacement 125cc Bore X Stroke 52.4 X 57.9 (mm) Maximum Power 8.2 Kw @ 8.500 Rpm Maximum Torque 10.8 Nm @ 5.000 Rpm Starting System Electric (acg Starter) Ignition Type Full Transistersized Transmission Type Automatic (v-matic) Suspension Type (front) Telescopic Suspension Type (rear) Unit Swing Brake Type (front) Hydraulic Dics Brake Type (rear) Mechanical Leading Trailing Tire Size (front) 90/80-14m/c 43p(tubeless) Tire Size (rear) 100/80-14m/c 48p (tubeless) Wheel Type Cast Wheel Wheel Base 1,280mm Overall Dimensions (l X W X H) 1,918 X 679 X 1.066 (mm) Curb Weight 112kg Seat Height 769(mm) Ground Clearance 131(mm) Fuel Tank Capacity 5.5 L Fuel System Pgm-fi Fuel Consumption 50.km/l(wmtc Test Method) Battery Type 12v 5ah (mf-wet)

Details: Title: Fourniture Et Livraison Des Vérins De Clapet Du Barrage De Créteil description: La Réalisation Des Études ; La Fabrication De Quatre Vérins Et Leurs Équipements À Savoir Pour Chaque Vérin : La Chape De Vérin Et Son Axe, Le Capteur Analogique, La Barre De Recopie, La Tuyauterie Rigide Et Flexible D'alimentation, Le Bloc Foré, La Valve Hydraulique Et Le Cardan ; La Livraison Des Vérins Sur Site En Conditionnement De Stockage (huile De Stockage, Bouchons) ; ? Toutes Les Opérations De Transport, Chargement, Déchargement, Le Personnel, Et Le Matériel Nécessaire À La Livraison Sur Le Site De Créteil Rue De L'écluse 94000 Créteil ; La Fourniture Des Plans D'exécution Et De Récolement Aux Formats Word, Excel, Autocad 2010 Civil3d Et Pdf Sur Format Informatique ; ? Avant La Livraison La Réalisation Des Essais Dans Les Locaux Du Titulaire En Présence Du Maître D'oeuvre Comprenant L'établissement D'un Procès-verbal Pour Chaque Vérin ; La Fourniture Et La Livraison Des Pièces De Rechange.

Details: Description Prod Yr. Model : L300 C/c 2.2d Fb Body W/ Dac 2025 General Specification: Overall Length: 4,440mm, Overall Width: 1,695mm, Overall Height: 1,915mm, Wheelbase: 2,350mm, Ground Clearance:195mm, Maximum Gross Vehicle Weight: 2,345kg, Curb Weight:1,130 Kg Transmission: 5 Speed Manual Engine: (4n14) 2.2l 4 In-line 16-valve Dohc With Turbocharged Intercooler System, Fuel System: Electronic Common Rail Direct Injection, Displacement: 2,268 Cc, Fuel Tank Capacity: 55 Liters, Power Output: 99.25/3500rpm, Torque: 200/1000-3500rpm Suspension Front: Independent Wishbone And Coil Spring, Suspension Rear: Semi-elleptic Leaf Spring Front Break: 10” Ventilated Disc, Rear: 10” Leading And Trailing Drums Gear Type: Ball And Nut Gear Type With Power Steering Steering Wheel: 2 Spoke Polypropylene Tires: 185r14c, Wheels: 14 X 5.0j Steel Rims Audio System: Mp3/tuner, Aux-in And Usb Port, 2 Speakers, Pillar Mounted

Details: Description 3.8 60,000 Km Check Up 1 Element Sub-assy, Air Cleaner Filter 1 Element, Air Refiner 1 Gasket 1 Oil Filter Imv 1 Tgfs Sn/cf 5w-30 4l 3 Tgfs Sn/cf 5w-30 1l 1 Twwf W765 1 Dsl Injector Cleaner 2 Toyota Genuine Diesel Engine Flush 1 Brake Cleaner 1 Toyota Genuine Bactaklenz (7ml) 2 Engine Oil Treatment 2 Bg Brake System Kit 2 Cotton Gloves 5 Waste Rags 1 Package Wash (large) 1 Replace Front Brake Pads 1 Pad Kit, Disc Brake L/fitting Parts, Fr 4 Replace Rear Brake Shoe 1 Shoe Kit, Rear Brake 18 Conventional Aircon Cleaning 1 Valve, Expansion, No.1 1 Dryer Kit 1.5 Ref R134a Freaon 150 Emkarate Oil Rl68h 2 Insulation Tape 2 Aerotape 2 Evaporator Leak Test 5 O-ring 5 O-ring 5 O-ring 3 Front Wheel Check-up

Description: CATEGORY: Supply of spare Relief Valve part no A3801 000 0000 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare GUIDE part no 103359 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SPRING WASHER part no 103478 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare ADJUSTING.BOLT part no 103479 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare LOCK NUT part no 103480 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SET SCREW part no 104150 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare DISC INSERT part no 136980 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare NOZZLE RING part no 137302 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare DISC HOLDER part no 147158 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare RETENTION CLIP part no 147601 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare GASKET SET part no 108305 A for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SPINDLE ASSY part no S60668 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare NOZZLE part no 102701 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506