Valve Tenders

Details: Description The Office Of The City Treasurer, San Carlos City, Pangasinan Is In Need Of 1 Unit Motorcycle With Sidecar(garong) Motorcycle Specification: Engine Type, 4 Stroke, 1-cylinder, Soch, 2 Valve, Bore X Stroke 53.5mm X 48.8mm, Max Power 5.5 Kw /7000 Rpm, Max Torque 9.0nm/4,000rpm, Engine Displacement 109.7 Cc ; Fuel System: Carburetor Type; Cooling System: Air Cooled; Starting: Electric & Kick; Transmission Type: 4-speed Constant Mesh; Ignition System: Dc Cdi; Compression Ratio: 9:6:1; Lubrication: Wet Sump; Clutch Type: Primary Wet Shoe Automatic Centrifugal Type; Suspension (front): Telescopic Coil Spring Oil Damped; Suspension( Rear): Swing Arm Type Coil Spring, Oil Damped; Tire Size (front): 70/90 -17 M / C38p; Tire Size (rear) : 80/90 -17 M/ C 44 P; Brake (front): Spoke –drum ; Mags-disc Brakes (rear) Spoke-drum Mags- Drum ; Fuel Tank Capacity 4.5 L Sidecar (garong) Specification:  Stainless  3 Chairs Inside  With Wind Sheild And “free Tarapal”

Details: Description Dump Truck No. 3 Set Brake Master Assembly 1 Pieces Oil Seal Pto 2 Pieces Tire 750 X R16 7 Set Hand Brake 1 Pieces Oil Filter C-525 2 Pieces Hub Oil Seal 2 Piece Hub Bearing 1 Piece Battery 6sm 1 Set Leaf Spring 1 Compactor No. 3 Pieces Oil Filter 012280 2 Piece Clutch Booster 1 Pieces Fuel Filter 2 Dump Truck No. 4 Piece Horn 1 Piece Clutch Disc 1 Piece Release Bearing 1 Pieces Cutting Disc 10 Set Taillight Assembly 1 Pieces Grinding Disc 4 Piece Accelerator Cable 1 Piece Cross Joint 1 Self-loader Set Hydrovac Assembly 1 Roll Auto Wire 1 Hino Dump Truck Set Piston Assembly 1 Piece Trust Washer 1 Pieces Beta Grey 3 Piece Pin 1 Set Connecting Rod Bearing 1 Piece Silicon Gasket 1 Piece Wiper Blade 1 Liter Silicon Oil 1 Set Overhauling Gasket 1 Liters Coolant 2 Set Valve Seal 1 Set Brake Shoe 1 Motorpool Use Gallons Lacquer Thinner 2

Details: Description 50 Pieces Volumetric Water Meter 1/2" Diameter Features: * Mid Certified * Very High Sensitivity Even At Low Flow * Suitable For Potable Water * Very Good Sensitivity In Initial Starting * Special Glass With High Resistance To Pressure & Impact * Protection Against External Magnetic Fields * Body Made Of Corrosion Resistant Brass * Non Return Valve * Suitable For Cold Water Up To 50°c * Almost No Maintenance Other Requirements: * 3 Years Warranty * Service And Spare Parts Available For 10 Years Performance Data Overload Flowrate Q4, M³/h, 3.125 Permanent Flowrate Q3, M³/h, 2.500 Transitional Flowrate Q2, M³/h, 0.020 Minimum Flowrate Q1, M³/h, 0.0125 Mounting On The Network All Positions Initial Flow Qi, L/h, 1 Maximum Working Pressure Bar 16 Maximum Working Temperature °c 50 Pressure Loss Class Bar 0.63 **********nothing Follows********** Note: Kindly Specify Your Brand, Model And Country Of Origin To Be Tendered And Kindly Attached The Brochure Of Your Product To Be Offered. Quotation Without Accompanied Brochure Will Not Be Included In The Technical Evaluation And Will Be Automatically Disqualified.

Details: Description The Department Of Agriculture-rfo 3, Invites Interested Suppliers To Submit Quotations/proposals For The Hereunder Requirement, To Wit: Parts & Materials 6 Set Tires (750 X 16) 14 Ply Job Description/specification Certificate Of Availability Of Stock With Installation/tire Mounting With Wheel Allignment And Balancing With Tire Valve Per Tire Wheel Weights Must Be Included Manufacture Date Must Be At Least 6 Months Prior To Delivery For Repair And Maintenance Of Rp Vehicle Jo-a119. Interested Suppliers May Download And Examine The Attached Request For Quotation Form By Clicking The Figure Opposite The Associated Components On This Page. The Department Of Agriculture-rfo 3 Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Quotation. Note: Interested Suppliers Must Download The Attached Document. Here’s The Procedure On How To Download The Attached Document. 1. To Order The Associated Component Of This Bid Notice, Please Click The “order” Link. 2. Upon Clicking The Order Link, The Order Basket Page Will Be Displayed. To Proceed The Ordering Of The Document In The Order Basket Page, Click The “continue” Button. 3. The System Will Display The Order Confirmation Page. To Confirm The Order, Click The “submit” Button. 4. The Order Summary Page Will Be Displayed. To View Or Download The Associated Documents, Click The Document Hyperlink Under The Item Column. 5. To Return To The Bid Notice Abstract Page, Click The “done” Button.

Details: Description Pe Pipe 1/2 Roll 1.00 8,000.00 2,800.00 8,000.00 2,800.00 10,800.00 Teflon Pcs 18.00 30.00 10.50 540.00 189.00 729.00 Faucet Pcs 19.00 200.00 70.00 3,800.00 1,330.00 5,130.00 Pp- R Tee 1/2 Pcs 20.00 30.00 10.50 600.00 210.00 810.00 Pp- R Elbow 1/2 Pcs 20.00 20.00 7.00 400.00 140.00 540.00 Gate Valve 1/2 Pcs 5.00 250.00 87.50 1,250.00 437.50 1,687.50 Sub-total 19,696.50 Materials 14,590.00 Labor (<35% Of The Materials) 5,106.50 Direct Cost (i + Ii) 19,696.50 Hauling Cost 303.50 Rental Of Equipments - Contingencies Indirect Cost (iv+v+vi) 303.50 Total Construction Cost (iii + Iv) 20,000.00

Details: Description Stock No. Description Quantity Unit 1 Coaster 29-seater Diesel Manual Transmission 1 Unit Overall Dimensions Length X Width X Height (mm) 6,990 X 2,080 X 2,635 Wheelbase (mm) 3,935 Tread Front/rear (mm) 1,690/1,490 Minimum Turning Radius (m) 6.5 Curb Weight (kg) 3,530-3660 Gross Vehicle Weight (kg) 5,670 Engine Transmission Type 4 Cylinder In-line, 16-valve Ohv, Gear Drive Diesel Displacement (cc) 4,009 Maximum Output (ps/rpm) 135/2,500 Maximum Torque (nm/rpm) 390/1,400 Transmission 5-speed Manual Fuel System Common-rail Type Regulation Euro 4 Chassis Suspension (front) Double Wishbone (rear)leaf Spring, Rigid Stabilizers With (front, Rear) Brakes (front) Ventilated Disc (rear) Dual Two Leading Drum Steering System Power Assisted Recirculating Ball Tires And Wheels (front) 215/70r17.5 (rear) 215/70r17.5 3 Yrs. Lto Registration Free 1 Year Gsis Comprehensive Insurance Free

Details: Description Ea Pressure Plate 1 Ea Air Cleaner Element 1 Ea Fuel Filter 1 Ea Oil Filter 1 Ea Glow Plug 4 Ea Radiator Fan Blade 1 Ea Radiator Clutch Fan 1 Ea Clutch Disc 1 Ea Release Bearing 1 Set Brake Shoe (rear) 1 Set Brake Pad 1 Pair Wiper Blade 1 Pcs Tie Rod End (ur) 2 Pcs Ball Joint Lower (ur) 2 Pcs Ball Joint (upper) 2 Set Brake Master Assy 1 Set Wheel Bearing Assy (front) 2 Pcs Cross Joint 2 Ea Cabin Filter 1 Kilo Freon Gas 2 Gal Urethane Thinner 4 Gal Body Filler 1 Ltrs Spray Filler 4 Ltr Rubbing Compound 1 Ea Buffing Pad 1 Pcs Masking Tape 3/4 30 Pcs Assorted Sandpaper 40 Kilos Freon Gas (134a) 2 Ea Aircon Receiver Drier 1 Ea Aircon Expansion Valve 1 Tin R-oil 1 Feet Pressure Hose 3/8 8 Pcs Tire Size #x 65r15 4 Pcs O-ring 8 Act Body Works 1

Details: Description Item No Description Qty Unit Unit Price Pr # Mp-200-2025-01-04 Nissan Dumptruck Sgl-644 Engine: Pf6t :model: Cwb450hdlt 1 Side Mirror 4 Pcs Grader Mg-330 Hidromek Engine: 6d16-tei: Model:mg-330 Hidromek 2 Side Mirror 4 Pcs 3 Gog Lamp Assembly 1 Set 4 Clearance Light 6 Pcs 5 Bolt 8mm 35 Pcs 6 Bolt 1/2" X 5 4 Pcs 7 Blade Guide 6 Pcs 8 Blade Washer 6 Pcs 9 Shir Pin 6 Pcs Isuzu Dumptruck Fv# 06 10 Fog Lamp Assembly 2 Pcs Backhoe Hitachi 11 Injector Test 6 Pcs 12 Injector Control Valve 6 Pcs 13 Nozzle Tip 4 Pcs Nissan Dumptruck Sgl-644 Engine:pf6t: Model:cwb450hdlt Supply Of Labor: 14 Build-up And Machining Release Bearing 1 Pc 15 Fabricate Hydraulic Hose 10" X 14 1 Pc 16 Radiator Assy. Overhaul 1 Set Abc: 199,261.00

Description: Contract notice – general guideline, standard rule open procedure (construction work) Diesterwegschule, heating installation Heating installation Diesterwegschule, heating installation Type and scope of work: The construction work involves the renovation and extension of the school consisting of an existing building as well as the construction of a new school building with two gymnasiums and a cafeteria. Number of floors: 7 full floors The following services are to be carried out: Heating installation: - 2 gas condensing boilers - 1 gas condensing combination device - 1 cascade with pump - 1 pressure maintenance station - 2 exhaust systems - 2 fresh water stations - Approx. 5470 m of pipes DN15 to DN100 - Approx. 876 various valves DN15 to DN80 - 21 high-efficiency pumps - 2 heating distributors - 27 heat meters - Approx. 5470 m thermal insulation - Approx. 618 m pipe bulkheads - 214 tubular radiators - 30 ceiling radiant heating panels

Details: Description The Zamboanga Peninsula Polytechnic State University Through Its Bids And Awards Committee (bac) Is Inviting Philgeps Registered Suppliers To Apply For Eligibility And To Submit Bids For The Items Listed Below: 1 Portland Cement, 40kg (710 Bags) 2 Coarse Sand (32 Cu.m.) 3 Gravel, ¾” Size (41 Cu.m.) 4 Fine Sand (18 Cu.m.) 5 Cement Water-proofing Compound, 1kg/bag (40 Bags) 6 Chb, 4” (4,365 Pcs.) 7 Rsb, 10mmø (585 Pcs.) 8 Rsb, 12mmø (190 Pcs.) 9 Rsb, 16mmø (180 Pcs.) 10 Dry Brickstone, Sorsogon (10.8 Sq.m.) 11 Concrete Neutralizer (10 Gals.) 12 Liquid Tile Primer (20 Gals.) 13 Patching Compound, 20kg (25 Bags) 14 Liquid Tile Top Coat, White (40 Gals.) 15 Baby Roller, Cloth (8 Pcs.) 16 Paint Roller, 6”, Cloth (8 Pcs.) 17 Paint Brush, 3” (8 Pcs.) 18 Waterproofing Paint, Gray (4 Gals.) 19 Pvc Sanitary Pipe, S1000, 4” (12 Pcs.) 20 Pvc Sanitary Pipe, S1000, 3” (5 Pcs.) 21 Pvc 90° Sanitary Elbow, 3” (8 Pcs.) 22 Wall Faucet Plain Bib, ½” X 6”, Stainless (7 Pcs.) 23 Wall Faucet Plain Bib, ½” X 4”, Stainless (6 Pcs.) 24 Wall Faucet Plain Bib, ½” X 2”, Stainless (18 Pcs.) 25 Stainless Floor Drain Main, 6” X 6” (13 Pcs.) 26 Stainless Floor Drain Main, 6” X 4” (2 Pcs.) 27 Pvc P-trap, S1000, 4”, Assembled (10 Pcs.) 28 Body Filler W/ Hardener (12 L) 29 Tee Reducer, 4” X 2” (20 Pcs.) 30 Pvc Elbow, 45°, 2” (10 Pcs.) 31 Pvc Tee, 4”, Sanitary (40 Pcs.) 32 Pvc Elbow, 90°, 4” (15 Pcs.) 33 Pvc Wye W/ Clean-out, 4”, 4” X 4” (10 Pcs.) 34 Ppr Pipes, Red Line, ½” (13 Pcs.) 35 Ppr Tee, ½” (40 Pcs.) 36 Ppr Elbow, ½” (50 Pcs.) 37 Solvent Cement, 400cc (2 Pcs.) 38 Water Closet W/ Trap, Flush Tank & Cover, White Porcelain (8 Sets) 39 Wall-mounted Urinal, White Porcelain, W/ Push Button Faucet Valve (7 Sets) 40 Surface Lavatories, Round & White, For Counters (7 Sets) 41 Cylindrical Knobset (4 Sets) 42 Sliding Barrel Flat Bolt, Stainless, 3” (8 Sets) 43 2-prong Universal Outlets (4 Sets) 44 Electrical Flexible Hose, 1/2” (60 M) 45 Electrical Tape, 16m, Big Size (4 Pcs.) 46 Junction Square Box W/ Cover (6 Pcs.) 47 Panel Board, 8 Branches (1 Set) 48 Utility Box (7 Pcs.) 49 Orbit Fan (2 Units) 50 Circuit Breaker, 30a (1 Pc.) 51 Circuit Breaker, 15a (2 Pcs.) 52 Led Downlight, White, 9w, 145mm X 145mm, 3 Colors (21 Pcs.) 53 Thhn Wire #12 (2 Boxes) 54 Thhn Wires #10 (1 Box) 55 2-gang Switch (2 Sets) 56 1-gang Switch (2 Sets) 57 4-gang Switch (1 Set) 58 Gi Tubular, 2” X 4” (20 Pcs.) 59 Stainless Zppsu Seal, 1.5m Ø (1 Set) 60 Fiber Cement Board, 3.5mm (40 Pcs.) 61 Double Metal Furring (145 Pcs.) 62 Cut-off Wheel Blade, 14” (4 Pcs.) 63 Angle Grinder Cutting Disc (20 Pcs.) 64 Mirror W/ Brown Aluminum Framing, 80cm H X 60cm W (1 Pc.) 65 Mirror W/ Brown Aluminum Framing, 80cm H X 200cm W (2 Pcs.) 66 Wall Angle, 0.4mm (35 Pcs.) 67 Filling Materials, No Boulders & Big Rocks (120 Cu.m.) 68 Door Bumper (4 Pcs.) 69 Stainless Toilet Signages, Male & Female (1 Pc.) 70 Stainless Toilet Signages, Male (1 Pc.) 71 Stainless Toilet Signages, Female (1 Pc.) 72 Stainless Toilet Signages, Pwd (1 Pc.) 73 Stainless Door Hinges, 3” X 3” X 2mm, Set Of 2 (8 Sets) 74 Stainless P-trap, For Lavatory (7 Sets) 75 Stainless Bidet, Chrome-plated, Spray (14 Sets) 76 Gi Welding Electrode (20 Kgs.) 77 Sanitary Pipes, S1000, 2” (12 Pcs.) 78 Louver-type Solid Panel Door, 1000 X 2100 X 40, Gloss Choco Brown (1 Set) 79 Louver-type Solid Panel Door, 700 X 2100 X 40, Gloss Choco Brown (1 Set) 80 Louver-type Solid Panel Door, 800 X 2100 X 40, Gloss Choco Brown (2 Sets) 81 Louver-type Solid Cafe Door, 500 X 1600 X 40, Gloss Choco Brown (7 Sets) 82 Door Jamb, Good Quality, 1m (1 Set) 83 Door Jamb, Good Quality, 0.7m (1 Set) 84 Door Jamb, Good Quality, 0.8m (2 Sets) 85 Door Jamb, Good Quality, 0.5m (7 Sets) 86 Stainless Flexible Hose, ½” X 12” (9 Pcs.) 87 Angle Valve, 2-way (8 Pcs.) 88 Angle Valve, Single (7 Pcs.) 89 Metal Single Robe Hook (12 Pcs.) 90 Stainless Steel Welding Electrode (5 Kgs.) 91 Non-slippery Porcelain Light Gray Tiles, 60” X 60” (197 Pcs.) 92 Glossy White Tiles, 30” X 60” (712 Pcs.) 93 Granite Slab, 60mm X 220mm (3 Pcs.) 94 Tile Adhesive, 25kg/bag (20 Bags) 95 Tile Grout, White, 2kg/bag (30 Bags) 96 Stainless Steel Tube, 2” Ø (12 Pcs.) 97 Stainless Steel Pipe Fitting, 90°, 2” Ø (12 Pcs.) 98 Pwd Stainless Grab Bar (3 Sets) 99 Awning-type Window W/ Analok Framing, 0.5m X 0.5m, Refer To Plan (8 Sets) 100 Awning-type Window W/ Analok Framing, 0.5m X 1.5m, Refer To Plan (4 Sets) 101 Common Wire Nails, 2”, 10kg/bag (2 Boxes) 102 Common Wire Nails, 3”, 10kg/bag (2 Boxes) 103 Common Wire Nails, 4”, 10kg/bag (3 Boxes) 104 Concrete Nails, 4”, 10kg/bag (1 Box) 105 Coco Lumber, 2” X 2” X 12’ (150 Pcs.) 106 Coco Lumber, 2” X 3” X 12’ (150 Pcs.) 107 Phenolic Board (20 Sheets) 108 Pvc Vertical Tank, 2000l (2 Pcs.) 109 Pvc Horizontal Tank, 1000l (1 Pc.) 110 Water Pump, 0.75hp (1 Set) 111 Bladder Tank, 20l (1 Set) 112 Pressure Gauge (1 Pc.) 113 Float Ball Valve (2 Pcs.) 114 Ppr Gate Valve, ½” (3 Pcs.) 115 Ppr Check Valve, ½” (4 Pcs.) 116 Double Float Suspension (3 Pcs.) 117 Ppr Pipe, ¾” Ø, Red Line (8 Pcs.) 118 Sanitary Coupling, 4” Ø (13 Pcs.) 119 Ppr Female Elbow, ½”, Metal Thread (45 Pcs.) 120 Ppr Coupling, ½” (25 Pcs.) 121 Ppr Ball Valve, ½” (2 Pcs.) 122 Ppr Ball Valve, ¾” (2 Pcs.) 123 Electric Impact Drill, Heavy-duty, Good Quality, 750w Min. (2 Units) 124 Angle Grinder, Heavy-duty, Good Quality, 710w Min. (2 Units) 125 Tie Wire #16 (50 Kgs.) 126 Glazing Putty (5 Gals.) 127 Flat Wall Enamel (10 Gals) 128 Enamel Quick-dry, White (10 Gals.) 129 Paint Thinner (5 Gals.) 130 Liquid Tile Tinting Color, Venetian Red, Full Tone (6 Pints) 131 Liquid Tile Tinting Color, Raw Sienna, Full Tone (6 Pints) 132 Liquid Tile Tinting Color, Hansa Yellow, Full Tone (6 Pints) 133 Liquid Tile Tinting Color, Bulletin Red, Full Tone (6 Pints) Note: For Details On Door & Window Dimensions & Specifications, Please Refer To The Pdmeo (project Development Management & Evaluation Office). ______________________________ Supplier’s Signature Over Printed Name The Schedule Of Bac Activities Is As Follows: 1. Pre-bid Conference - December 23, 2024, @ 10:00a.m. 2. Receipt And Opening Of Bids - January 6, 2025, @ 10:00a.m. 3. Bid Evaluation - January 7-14, 2025 4. Post-qualification - January 7-14, 2025 5. Issuance Of Notice Of Award - January 15, 2025 6. Contract Preparation & Signing - January 16, 2025 7. Issuance Of Notice To Proceed - January 16, 2025 The Criteria To Be Used For The Eligibility Check Of Prospective Bidders, Examination And Evaluation Of Bids, Post-qualification And All Matters To This Procurement Shall Be Under Republic Act No. 9184 (the Government Procurement Reform Act) And Its Implementing Rules And Regulations. Interested Bidders May Obtain Further Thank Important Notice To Bidders: 1. Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Of Five Thousand Pesos (p 5,000.00). It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 2. All Bidders Are Required To Post A Bid Security In The Form Of A Cash/bank Guarantee (2% Of Abc) Or Surety Bond (5% Of Abc) Or Bid Securing Declaration. 3. The Bidder Shall Prepare An Original Technical And Financial Proposal, Copy 1 And Copy 2. 4. State The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative In A Sealed Envelope. 5. Warranty Shall Be For Three (3) Months For Supplies And Materials. One (1) Year For Equipment From The Date Of Acceptance By The Procuring Agency. 6. All Erasures Must Be Initialed To Avoid Disqualifications. 7. Late Submission Of Bids Will Not Be Accepted. Approved By: (sgd.) Jocelyn P. Remoto Bac Chairperson The Zamboanga Peninsula Polytechnic State University Reserves The Right To Reject Any Or All Bids, Accept The Bid Most Advantageous To The Government, And Award The Contract By Lot.