Valve Tenders

Details: Description Section Ii. Instructions To Bidders A. General 1. Scope Of Bid 1.1 The Procuring Entity Named In The Bds Invites Bids For The Supply And Delivery Of The Goods As Described In Section Vii. Technical Specifications. 1.2 The Name, Identification, And Number Of Lots Specific To This Bidding Are Provided In The Bds. The Contracting Strategy And Basis Of Evaluation Of Lots Is Described In Itb Clause 28. 2. Source Of Funds The Procuring Entity Has A Budget Or Has Received Funds From The Funding Source Named In The Bds, And In The Amount Indicated In The Bds. It Intends To Apply Part Of The Funds Received For The Project, As Defined In The Bds, To Cover Eligible Payments Under The Contract. 3. Corrupt, Fraudulent, Collusive, And Coercive Practices 3.1 Unless Otherwise Specified In The Bds, The Procuring Entity As Well As The Bidders And Suppliers Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. In Pursuance Of This Policy, The Procuring Entity: (a) Defines, For Purposes Of This Provision, The Terms Set Forth Below As Follows (i) “corrupt Practice” Means Behavior On The Part Of Officials In The Public Or Private Sectors By Which They Improperly And Unlawfully Enrich Themselves, Others, Or Induce Others To Do So, By Misusing The Position In Which They Are Placed, And Includes The Offering, Giving, Receiving, Or Soliciting Of Anything Of Value To Influence The Action Of Any Such Official In The Procurement Process Or In Contract Execution; Entering, On Behalf Of The Government, Into Any Contract Or Transaction Manifestly And Grossly Disadvantageous To The Same, Whether Or Not The Public Officer Profited Or Will Profit Thereby, And Similar Acts As Provided In Ra 3019; (ii) “fraudulent Practice” Means A Misrepresentation Of Facts In Order To Influence A Procurement Process Or The Execution Of A Contract To The Detriment Of The Procuring Entity, And Includes Collusive Practices Among Bidders (prior To Or After Bid Submission) Designed To Establish Bid Prices At Artificial, Non-competitive Levels And To Deprive The Procuring Entity Of The Benefits Of Free And Open Competition. (iii) “collusive Practices” Means A Scheme Or Arrangement Between Two Or More Bidders, With Or Without The Knowledge Of The Procuring Entity, Designed To Establish Bid Prices At Artificial, Non-competitive Levels. (iv) “coercive Practices” Means Harming Or Threatening To Harm, Directly Or Indirectly, Persons, Or Their Property To Influence Their Participation In A Procurement Process, Or Affect The Execution Of A Contract; (v) “obstructive Practice” Is (aa) Deliberately Destroying, Falsifying, Altering Or Concealing Of Evidence Material To An Administrative Proceedings Or Investigation Or Making False Statements To Investigators In Order To Materially Impede An Administrative Proceedings Or Investigation Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Into Allegations Of A Corrupt, Fraudulent, Coercive Or Intimidating Any Party To Prevent It From Disclosing Its Knowledge Of Matters Relevant To The Administrative Proceedings Or Investigation Or From Pursuing Such Proceedings Or Investigation; Or (bb) Acts Intended To Materially Impede The Exercise Of The Inspection And Audit Rights Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Herein. (b) Will Reject A Proposal For Award If It Determines That The Bidder Recommended For Award Has Engaged In Any Of The Practices Mentioned In This Clause For Purposes Of Competing For The Contract. 3.2 Further, The Procuring Entity Will Seek To Impose The Maximum Civil, Administrative, And/or Criminal Penalties Available Under Applicable Laws On Individuals And Organizations Deemed To Be Involved In Any Of The Practices Mentioned In Itb Clause 3.1(a). 3.3 Furthermore, The Funding Source And The Procuring Entity Reserve The Right To Inspect And Audit Records And Accounts Of A Bidder Or Supplier In The Bidding For And Performance Of A Contract Themselves Or Through Independent Auditors As Reflected In The Gcc Clause 3. 4. Conflict Of Interest 4.1 All Bidders Found To Have Conflicting Interests Shall Be Disqualified To Participate In The Procurement At Hand, Without Prejudice To The Imposition Of Appropriate Administrative, Civil, And Criminal Sanctions. A Bidder May Be Considered To Have Conflicting Interests With Another Bidder In Any Of The Events Described In Paragraphs (a) Through (c) Below And A General Conflict Of Interest In Any Of The Circumstances Set Out In Paragraphs (d) Through (f) Below: (a) A Bidder Has Controlling Shareholders In Common With Another Bidder; (b) A Bidder Receives Or Has Received Any Direct Or Indirect Subsidy From Any Other Bidder; (c) A Bidder Has The Same Legal Representative As That Of Another Bidder For Purposes Of This Bid; (d) A Bidder Has A Relationship, Directly Or Through Third Parties, That Puts Them In A Position To Have Access To Information About Or Influence On The Bid Of Another Bidder Or Influence The Decisions Of The Procuring Entity Regarding This Bidding Process. This Will Include A Firm Or An Organization Who Lends, Or Temporarily Seconds, Its Personnel To Firms Or Organizations Which Are Engaged In Consulting Services For The Preparation Related To Procurement For Or Implementation Of The Project If The Personnel Would Be Involved In Any Capacity On The Same Project; (e) A Bidder Submits More Than One Bid In This Bidding Process. However, This Does Not Limit The Participation Of Subcontractors In More Than One Bid; Or (f) (g) A Bidder Who Participated As A Consultant In The Preparation Of The Design Or Technical Specifications Of The Goods And Related Services That Are The Subject Of The Bid. A Bidder Who Lends, Or Temporarily Seconds, Its Personnel To Firms Or Organizations Which Are Engaged In Consulting Services For The Preparation Related To Procurement Or Implementation Of The Project, If The Personnel Would Be Involved In Any Capacity On The Same Project. 4.2 In Accordance With Section 47 Of The Irr Of Ra 9184, All Bidding Documents Shall Be Accompanied By A Sworn Affidavit Of The Bidder That It Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), Members Of The Technical Working Group (twg), Members Of The Bac Secretariat, The Head Of The Project Management Office (pmo) Or The End-user Unit, And The Project Consultants, By Consanguinity Or Affinity Up To The Third Civil Degree. On The Part Of The Bidder, This Clause Shall Apply To The Following Persons: (a) If The Bidder Is An Individual Or A Sole Proprietorship, To The Bidder Himself; (b) If The Bidder Is A Partnership, To All Its Officers And Members; (c) (d) If The Bidder Is A Corporation, To All Its Officers, Directors, And Controlling Stockholders; And If The Bidder Is A Cooperative, To All Its Officers, Directors And Controlling Share Holders Or Members; And (e) If The Bidder Is A Joint Venture (jv), The Provisions Of Items (a), (b), Or (c) Of This Clause Shall Correspondingly Apply To Each Of The Members Of The Said Jv, As May Be Appropriate Relationship Of The Nature Described Above Or Failure To Comply With This Clause Will Result In The Automatic Disqualification Of A Bidder. 5. Eligible Bidders 5.1 Unless Otherwise Indicated In The Bds, The Following Persons Shall Be Eligible To Participate In This Bidding: (a) Duly Licensed Filipino Citizens/sole Proprietorships; (b) Partnerships Duly Organized Under The Laws Of The Philippines And Of Which At Least Sixty Percent (60%) Of The Interest Belongs To Citizens Of The Philippines; (c) Corporations Duly Organized Under The Laws Of The Philippines, And Of Which At Least Sixty Percent (60%) Of The Outstanding Capital Stock Belongs To Citizens Of The Philippines; (d) Cooperatives Duly Organized Under The Laws Of The Philippines, And Of Which At Least Sixty Percent (60%) Of The Interest Belongs To Citizens Of The Philippines; And (e) Persons/entities Forming Themselves Into A Jv, I.e., A Group Of Two (2) Or More Persons/entities That Intend To Be Jointly And Severally Responsible Or Liable For A Particular Contract: Provided, However, That Filipino Ownership Or Interest Of The Joint Venture Concerned Shall Be At Least Sixty Percent (60%). 5.2 Foreign Bidders May Be Eligible To Participate When Any Of The Following Circumstances Exist, As Specified In The Bds. (a) When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra 9184 And Its Irr Allow Foreign Bidders To Participate; (b) Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; (c) When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or (d) When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3 Government Owned Or Controlled Corporations (goccs) May Be Eligible To Participate Only If They Can Establish That They (a) Are Legally And Financially Autonomous, (b) Operate Under Commercial Law, And (c) Are Not Attached Agencies Of The Procuring Entity. 5.4 Unless Otherwise Provided In The Bds, The Bidder Must Have Completed A Single Largest Completed Contract (slcc) Similar To The Project The Value Of Which, Adjusted If Necessary, By The Bidder To Current Prices Using The Philippine Statistics Authority (psa) Consumer Price Index, Must Be At Least Equivalent To A Percentage Of The Abc Stated In The Bds. For This Purpose, Contracts Similar To The Project Shall Be Those Described In The Bds, And Completed Within The Relevant Period Stated In The Invitation To Bid And Itb Clause 12.1(a)(ii). 5.5 Unless Otherwise Provided In The Bds, The Bidder Must Submit A Computation Of Its Net Financial Contracting Capacity (nfcc) Which Must Be At Least Equal To The Abc To Be Bid, Calculated As Follows: Nfcc = [(current Assets Minus Current Liabilities) (k)] Minus The Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Ongoing Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract To Be Bid. Where: K = 15 The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Latest Audited Financial Statements Submitted To The Bir, Through Its Electronic Filling And Payment System (efps). If The Prospective Bidder Opts To Submit A Committed Line Of Credit (clc), It Must Be At Least Equal To Ten Percent (10%) Of The Abc To Be Bid And Issued By Auniversal Or Commercial Bank. 6. Bidders Responsibilities 6.1 The Bidder Or Its Duly Authorized Representative Shall Submit A Sworn Statement In The Form Prescribed In Section Viii – Bidding Forms As Required In Itb Clause 12.1(b)(iv). 6.2 The Bidder Is Responsible For The Following: (a) Having Taken Steps To Carefully Examine All Of The Bidding Documents; (b) Having Acknowledged All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; (c) Having Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And (d) Having Complied With Its Responsibility To Inquire Or Secure Supplemental/bid Bulletin(s) As Provided Under Itb Clause 10.4; (e) Ensuring That It Is Not “blacklisted” Or Barred From Bidding By The Gop Or Any Of Its Agencies, Offices, Corporations, Or Lgus, Including Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Gppb, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting. (f) Ensuring That Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; (g) Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative/s To Verify All The Documents Submitted; (h) Ensuring That The Signatory Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary And/or To Represent The Bidder In The Bidding, With The Duly Notarized Secretary’s Certificate Attesting To Such Fact, If The Bidder Is A Corporation, Partnership, Cooperative, Or Joint Venture; (i) Complying With The Disclosure Provision Under Section 47 Of Ra 9184 In Relation To Other Provisions Of Ra 3019; And (j) (k) (l) Complying With Existing Labor Laws And Standards, In The Case Of Procurement Of Services Ensuring That It Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Of Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. Failure To Observe Any Of The Above Responsibilities Shall Be At The Risk Of The Bidder Concerned. 6.3 The Bidder Is Expected To Examine All Instructions, Forms, Terms, And Specifications In The Bidding Documents. Unless Otherwise Indicated In The Bds, Failure To Furnish All Information Or Documentation Required In The Bidding Documents Shall Result In The Rejection Of The Bid And The Disqualification Of The Bidder. 6.4 It Shall Be The Sole Responsibility Of The Bidder To Determine And To Satisfy Itself By Such Means As It Considers Necessary Or Desirable As To All Matters Pertaining To The Contract To Be Bid, Including: (a) The Location And The Nature Of This Project; (b) Climatic Conditions; (c) Transportation Facilities; And (d) Other Factors That May Affect The Cost, Duration, And Execution Or Implementation Of This Project. 6.5 The Procuring Entity Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Or Conclusions By The Prospective Or Eligible Bidder Out Of The Data Furnished By The Procuring Entity. However, The Procuring Entity Shall Ensure That All Information In The Bidding Documents, Including Bid/supplemental Bid Bulletin/s Issued, Are Correct And Consistent. 6.6 The Bidder Shall Bear All Costs Associated With The Preparation And Submission Of His Bid, And The Procuring Entity Will In No Case Be Responsible Or Liable For Those Costs, Regardless Of The Conduct Or Outcome Of The Bidding Process. 6.7 Before Submitting Their Bids, The Bidder Is Deemed To Have Become Familiar With All Existing Laws, Decrees, Ordinances, Acts And Regulations Of The Philippines Which May Affect This Project In Any Way. 6.8 The Bidder Should Note That The Procuring Entity Will Accept Bids Only From Those That Have Paid The Non-refundable Fee For The Bidding Documents At The Office Indicated In The Invitation To Bid. 7. Origin Of Goods And Services Unless Otherwise Indicated In The Bds, There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The United Nations Security Council Taken Under Chapter Vii Of The Charter Of The United Nations, Subject To Itb Clause 27.1. 8. Subcontracts 8.1 Unless Otherwise Specified In The Bds, The Bidder May Subcontract Portions Of The Goods To An Extent As May Be Approved By The Procuring Entity And Stated In The Bds. However, Subcontracting Of Any Portion Shall Not Relieve The Bidder From Any Liability Or Obligation That May Arise From The Contract For This Project. 8.2 Subcontractors Must Comply With The Eligibility Criteria And The Documentary Requirements Specified In The Bds. In The Event That Any Subcontractor Is Found By The Procuring Entity To Be Ineligible, The Subcontracting Of Such Portion Of The Goods Shall Be Disallowed. 8.3 The Bidder May Identify The Subcontractor To Whom A Portion Of The Goods Will Be Subcontracted At Any Stage Of The Bidding Process Or During Contract Implementation. If The Bidder Opts To Disclose The Name Of The Subcontractor During Bid Submission, The Bidder Shall Include The Required Documents As Part Of The Technical Component Of Its Bid. B. Contents Of The Bidding Documents 9. Pre-bid Conference 9.1 If So Specified In The Bds, A Pre-bid Conference Shall Be Held At The Venue And On The Date Indicated Therein, To Clarify And Address The Bidders’ Questions On The Technical And Financial Components Of This Project. 9.2 Bidders Are Encouraged To Attend The Pre-bid Conference To Ensure That They Fully Understand The Procuring Entity’s Requirements. Non-attendance Of The Bidder Will In No Way Prejudice Its Bid; However, The Bidder Is Expected To Know The Changes And/or Amendments To The Bidding Documents Discussed During The Pre-bid Conference. 9.3 Any Statement Made At The Pre-bid Conference Shall Not Modify The Terms Of The Bidding Documents Unless Such Statement Is Specifically Identified In Writing As An Amendment Thereto And Issued As A Supplemental/bid Bulletin. 10. Clarification And Amendment Of Bidding Documents 10.1 Bidders Who Have Purchased The Bidding Documents May Request For Clarifications On Any Part Of The Bidding Documents For An Interpretation. Such A Request Must Be In Writing And Submitted To The Procuring Entity At The Address Indicated In The Bds At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10.2 Supplemental/bid Bulletins May Be Issued Upon The Procuring Entity’s Initiative For Purposes Of Clarifying Or Modifying Any Provision Of The Bidding Documents Not Later Than Seven (7) Calendar Days Before The Deadline For The Submission And Receipt Of Bids. Any Modification To The Bidding Documents Shall Be Identified As An Amendment. 10.3 Any Supplemental/bid Bulletin Issued By The Bac Shall Also Be Posted On The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity Concerned, If Available. It Shall Be The Responsibility Of All Bidders Who Secure The Bidding Documents To Inquire And Secure Supplemental/bid Bulletins That May Be Issued By The Bac. However, Bidders Who Have Submitted Bids Before The Issuance Of The Supplemental/bid Bulletin Must Be Informed And Allowed To Modify Or Withdraw Their Bids In Accordance With Itb Clause 23. C. Preparation Of Bids 11. Language Of Bids The Bid, As Well As All Correspondence And Documents Relating To The Bid Exchanged By The Bidder And The Procuring Entity, Shall Be Written In English. Supporting Documents And Printed Literature Furnished By The Bidder May Be In Another Language Provided They Are Accompanied By An Accurate Translation In English Certified By The Appropriate Embassy Or Consulate In The Philippines, In Which Case The English Translation Shall Govern For Purposes Of Interpretation Of The Bid. 12. Documents Comprising The Bid: Eligibility And Technical Components. 12.1 Unless Otherwise Indicated In The Bds, The First Envelope Shall Contain The Following Eligibility And Technical Documents: (a) Eligibility Documents - Class "a" Documents: (i) Philgeps Platinum Certificate Of Registration And Membership With Annex A In Accordance With Section 8.5.2 Of The Irr. (ii) Statement Of All Its Ongoing Government And Private Contracts Within The Period Stated In The Bds, Including Contracts Awarded But Not Yet Started, If Any. Statement Of The Bidder's Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, In Accordance With Itb Clause 5.4, Within The Relevant Period As Provided In The Bds. The Two Statements Required Shall Indicate For Each Contract The Following: (ii.1) Name Of The Contract; (ii.2) Date Of The Contract; (ii.3) Contract Duration; (ii.4) Owner's Name And Address; (ii.5) Kinds Of Goods; (ii.6) (ii.7) (ii.8) (ii.9) For Statement Of Ongoing Contracts- Amount Of Contract And Value Of Outstanding Contracts; For Statement Of Slcc-amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa's Consumer Price Index, If Necessary For The Purpose Of Meeting The Slcc Requirement; Date Of Delivery; And End User's Acceptance Or Official Receipt(s) Or Sales Invoice Issued For The Contract, If Completed, Which Shall Be Attached To The Statements. (iii) The Prospective Bidder’s Computation Of Its Net Financial Contracting Capacity (nfcc) Which Must Be At Least Equal To The Abc To Be Bid, Calculated As Follows: Nfcc = [(current Assets Minus Current Liabilities) (k)] Minus The Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Ongoing Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract To Be Bid. Where: K = 15 The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Data Submitted To The Bir, Through Its Electronic Filling And Payment System (efps). Or A Committed Line Of Credit From A Universal Or Commercial Bank (not Applicable To Procurement Of Infrastructure Projects) Class "b" Document: (iv) If Applicable, The Jva In Case The Joint Venture Is Already In Existence, Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. (b) Technical Documents - (i) Bid Security In Accordance With Itb Clause 18. If The Procuring Entity Requires The Bidders To Submit The Bid Security In The Form Of: (i.1) Cash Or Cashier’s/ Manager’s Check, Issued By A Universal Or Commercial Bank; Or (i.2) A Bank Draft/guarantee Or An Irrevocable Letter Of Credit Issued By A Universal/ Commercial Bank, It Shall Be Accompanied By A Confirmation From A Universal Or Commercial Bank, If Issued By A Foreign Bank; Or (i.3) (i.4) A Surety Bond Accompanied By A Certification Coming From An Authorized Insurance Commission That A Surety Or Insurance Company Is Authorized To Issue Such Instrument; Bid Securing Declaration (ii) (iii) Statement Of Compliance To The Schedule Of Requirements Conformity With Technical Specifications, As Enumerated And Specified In Sections Vi And Vii Of The Bidding Documents; And (iv) Sworn Statement In Accordance With Section 25.2(a)(iv) Of The Irr Of Ra 9184 And Using The Form Prescribed In Section Viii – Bidding Forms. 13. Documents Comprising The Bid: Financial Component 13.1 Unless Otherwise Stated In The Bds, The Financial Component Of The Bid Shall Contain The Following: (a) Financial Bid Form, Which Includes Bid Prices And The Bill Of Quantities And The Applicable Price Schedules, In Accordance With Itb Clauses 15.1 And 15.4; (b) If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From The Dti, Sec, Or Cda Issued In Accordance With Itb Clause 27; And (c) Any Other Document Required In The Bds 13.2 Unless Otherwise Stated In The Bds, All Bids That Exceed The Abc Shall Not Be Accepted. 14. Alternative Bids Alternative Bids Shall Be Rejected. For This Purpose, Alternative Bid Is An Offer Made By A Bidder In Addition Or As A Substitute To Its Original Bid Which May Be Included As Part Of Its Original Bid Or Submitted Separately Therewith For Purposes Of Bidding. A Bid With Options Is Considered An Alternative Bid Regardless Of Whether Said Bid Proposal Is Contained In A Single Envelope Or Submitted In Two (2) Or More Separate Bid Envelopes. 15. Bid Prices 15.1 The Bidder Shall Complete The Appropriate Price Schedules Included Herein, Stating The Unit Prices, Total Price Per Item, The Total Amount And The Expected Countries Of Origin Of The Goods To Be Supplied Under This Project. 15.2 The Bidder Shall Fill In Rates And Prices For All Items Of The Goods Described In The Bill Of Quantities. Bids Not Addressing Or Providing All Of The Required Items In The Bidding Documents Including, Where Applicable, Bill Of Quantities, Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. In This Regard, Where A Required Item Is Provided, But No Price Is Indicated, The Same Shall Be Considered As Non-responsive, But Specifying A "0" (zero) Or A Dash (-) For The Said Item Would Mean That It Is Being Offered For Free To The Government. 15.3 The Terms Ex Works (exw), Cost, Insurance And Freight (cif), Cost And Insurance Paid To (cip), Delivered Duty Paid (ddp), And Other Trade Terms Used To Describe The Obligations Of The Parties, Shall Be Governed By The Rules Prescribed In The Current Edition Of The International Commercial Terms (incoterms) Published By The International Chamber Of Commerce, Paris. 15.4 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: (a) For Goods Offered From Within The Procuring Entity’s Country (i) The Price Of The Goods Quoted Exw (ex Works, Ex Factory, Ex Warehouse, Ex Showroom, Or Off-the-shelf, As Applicable), Including All Customs Duties And Sales And Other Taxes Already Paid Or Payable (i.1) On The Components And Raw Material Used In The Manufacture Or Assembly Of Goods Quoted Ex Works Or Ex Factory; Or (i.2) On The Previously Imported Goods Of Foreign Origin Quoted Ex Warehouse, Ex Showroom, Or Off-the-shelf And Any Procuring Entity Country Sales And Other Taxes Which Will Be Payable On The Goods If The Contract Is Awarded. (ii) The Price For Inland Transportation, Insurance, And Other Local Costs Incidental To Delivery Of The Goods To Their Final Destination. (iii) The Price Of Other (incidental) Services, If Any, Listed In The Bds. (b) For Goods Offered From Abroad: (i) Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Ddp With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. (ii) The Price Of Other (incidental) Services, If Any, Listed In The Bds 15.5 Prices Quoted By The Bidder Shall Be Fixed During The Bidder’s Performance Of The Contract And Not Subject To Variation Or Price Escalation On Any Account, Unless Otherwise Specified In The Bds. A Bid Submitted With An Adjustable Price Quotation Shall Be Treated As Non-responsive And Shall Be Rejected, Pursuant To Itb Clause 24. 15.6 All Bid Prices Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Indicated In The Bds And Specified In The Gcc And Its Corresponding Scc Provision. 16. Bid Currencies 16.1 Prices Shall Be Quoted In The Following Currencies: (a) For Goods That The Bidder Will Supply From Within The Philippines, The Prices Shall Be Quoted In Philippine Pesos. (b) For Goods That The Bidder Will Supply From Outside The Philippines, The Prices May Be Quoted In The Currency(ies) Stated In The Bds. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 16.2 If So Allowed In Accordance With Itb Clause 16.1, The Procuring Entity For Purposes Of Bid Evaluation And Comparing The Bid Prices Will Convert The Amounts In Various Currencies In Which The Bid Price Is Expressed To Philippine Pesos At The Foregoing Exchange Rates. 16.3 Unless Otherwise Specified In The Bds, Payment Of The Contract Price Shall Be Made In Philippine Pesos. 17. Bid Validity 17.1 Bids Shall Remain Valid For The Period Specified In The Bds Which Shall Not Exceed One Hundred Twenty (120) Calendar Days From The Date Of The Opening Of Bids. 17.2 In Exceptional Circumstances, Prior To The Expiration Of The Bid Validity Period, The Procuring Entity May Request Bidders To Extend The Period Of Validity Of Their Bids. The Request And The Responses Shall Be Made In Writing. The Bid Security Described In Itb Clause 18 Should Also Be Extended Corresponding To The Extension Of The Bid Validity Period At The Least. A Bidder May Refuse The Request Without Forfeiting Its Bid Security, But His Bid Shall No Longer Be Considered For Further Evaluation And Award. A Bidder Granting The Request Shall Not Be Required Or Permitted To Modify Its Bid. 18. Bid Security 18.1 The Procuring Entity Shall Prescribe In The Bds The Acceptable Forms Of Bid Security That Bidders May Opt To Use, Which Shall Include The Bid Securing Declaration (bsd) Or Any Other Form Of Bid Security And The Amount Of Which Shall Be Equal To A Percentage Of The Abc In Accordance With The Following Schedule: Form Of Bid Security Amount Of Bid Security (not Less Than The Percentage Of The Abc) (a) Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank Two Percent (2%) (b) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank (c) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Five Percent (5%) For Biddings Conducted By Lgus, The Procuring Entity May Also Require Bidders To Submit Bid Securities In The Form Of Cashier’s/manager’s Check, Bank Draft/guarantee, Or Irrevocable Letter Of Credit From Other Banks Certified By The Bsp As Authorized To Issue Such Financial Statement. The Bid Securing Declaration Mentioned Above Is An Undertaking Which States, Among Others, That The Bidder Shall Enter Into Contract With The Procuring Entity And Furnish The Performance Security Required Under Itb Clause 33.2, From Receipt Of The Notice Of Award, And Committing To Pay The Corresponding Fine, And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event It Violates Any Of The Conditions Stated Therein As Provided In The Guidelines Issued By The Gppb. 18.2 The Bid Security Should Be Valid For The Period Specified In The Bds. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 18.3 No Bid Securities Shall Be Returned To Bidders After The Opening Of Bids And Before Contract Signing, Except To Those That Failed Or Declared As Post-disqualified, Upon Submission Of A Written Waiver Of Their Right To File A Motion For Reconsideration And/or Protest. Without Prejudice On Its Forfeiture, Bid Securities Shall Be Returned Only After The Bidder With The Lowest Calculated And Responsive Bid Has Signed The Contract And Furnished The Performance Security, But In No Case Later Than The Expiration Of The Bid Security Validity Period Indicated In Itb Clause 18.2. 18.4 Upon Signing And Execution Of The Contract Pursuant To Itb Clause 32, And The Posting Of The Performance Security Pursuant To Itb Clause 33, The Successful Bidder’s Bid Security Will Be Discharged, But In No Case Later Than The Bid Security Validity Period As Indicated In The Itb Clause 18.2. 18.5 The Bid Security May Be Forfeited: (a) If A Bidder: (i) Withdraws Its Bid During The Period Of Bid Validity Specified In Itb Clause 17; (ii) Does Not Accept The Correction Of Errors Pursuant To Itb Clause 28.3(b); (iii) Fails To Submit The Requirements Within The Prescribed Period, Or A Finding Against Their Veracity, As Stated In Itb Clause 29.2; Or (iv) Any Other Reason Stated In The Bds. (b) If The Successful Bidder: (i) Fails To Sign The Contract In Accordance With Itb Clause 32; (ii) Fails To Furnish Performance Security In Accordance With Itb Clause 33; Or (iii) Any Other Reason Stated In The Bds. 19. Format And Signing Of Bids 19.1 Bidders Shall Submit Their Bids Through Their Duly Authorized Representative Using The Appropriate Forms Provided In Section Viii – Bidding Forms On Or Before The Deadline Specified In The Itb Clauses 21 In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously. The First Shall Contain The Technical Component Of The Bid, Including The Eligibility Requirements Under Itb Clause 12.1, And The Second Shall Contain The Financial Component Of The Bid. 19.2 Forms As Mentioned In Itb Clause 19.1 Must Be Completed Without Any Alterations To Their Format, And No Substitute Form Shall Be Accepted. All Blank Spaces Shall Be Filled In With The Information Requested 19.3 The Bidder Shall Prepare And Submit An Original Of The First And Second Envelopes As Described In Itb Clauses 12 And 13. In Addition, The Bidder Shall Submit Copies Of The First And Second Envelopes. In The Event Of Any Discrepancy Between The Original And The Machine Copies, The Original Shall Prevail. 19.4 Each And Every Page Of The Bid Form, Including The Schedule Of Prices, Under Section Viii Hereof, Shall Be Signed By The Duly Authorized Representative/s Of The Bidder. Failure To Do So Shall Be A Ground For The Rejection Of The Bid. 19.5 Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder. 20. Sealing And Marking Of Bids 20.1 Unless Otherwise Indicated In The Bds, Bidders Shall Enclose Their Original Eligibility And Technical Documents Described In Itb Clause 12in One Sealed Envelope Marked “original - Technical Component”, And The Original Of Their Financial Component In Another Sealed Envelope Marked “original - Financial Component”, Sealing Them All In An Outer Envelope Marked “original Bid”. 20.2 Each Copy Of The First And Second Envelopes Shall Be Similarly Sealed Duly Marking The Inner Envelopes As “copy No. ___ - Technical Component” And “copy No. ___ – Financial Component” And The Outer Envelope As “copy No. ___”, Respectively. These Envelopes Containing The Original And The Copies Shall Then Be Enclosed In One Single Envelope. 20.3 The Original And The Number Of Copies Of The Bid As Indicated In The Bds Shall Be Typed Or Computerized In Indelible Ink And Shall Be Signed By The Bidder Or Its Duly Authorized Representative/s. 20.4 All Envelopes Shall (a) Contain The Name Of The Contract To Be Bid In Capital Letters; (b) Bear The Name And Address Of The Bidder In Capital Letters; (c) Be Addressed To The Procuring Entity’s Bac Identified In Itb Clause 1.1, (d) Bear The Specific Identification Of This Bidding Process Indicated In The Itb Clause 1.2; And (e) Bear A Warning “do Not Open Before…” The Date And Time For The Opening Of Bids, In Accordance With Itb Clause 21. 20.5 Bid Envelopes That Are Not Properly Sealed And Marked As Required In The Bidding Documents, Shall Not Be Rejected, But The Bidder Or Its Duly Authorized Representative Shall Acknowledge Such Condition Of The Bid As Submitted. The Bac Or The Procuring Entity Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or For Its Premature Opening. D. Submission And Opening Of Bids 21. Deadline For Submission Of Bids Bids Must Be Received By The Procuring Entity’s Bac At The Address And On Or Before The Date And Time Indicated In The Bds. 22. Late Bids Any Bid Submitted After The Deadline For Submission And Receipt Of Bids Prescribed By The Procuring Entity, Pursuant To Itb Clause 21, Shall Be Declared “late” And Shall Not Be Accepted By The Procuring Entity 23. Modification And Withdrawal Of Bids 23.1 The Bidder May Modify Its Bid After It Has Been Submitted; Provided That The Modification Is Received By The Procuring Entity Prior To The Deadline Prescribed For Submission And Receipt Of Bids. The Bidder Shall Not Be Allowed To Retrieve Its Original Bid, But Shall Be Allowed To Submit Another Bid Equally Sealed, Properly Identified, Linked To Its Original Bid Marked As “technical Modification” Or “financial Modification” And Stamped “received” By The Bac. Bid Modifications Received After The Applicable Deadline Shall Not Be Considered And Shall Be Returned To The Bidder Unopened. 23.2 A Bidder May, Through A Letter Of Withdrawal, Withdraw Its Bid After It Has Been Submitted, For Valid And Justifiable Reason; Provided That The Letter Of Withdrawal Is Received By The Procuring Entity Prior To The Deadline Prescribed For Submission And Receipt Of Bids. The Letter Of Withdrawal Must Be Executed By The Duly Authorized Representative Of The Bidder Identified In The Omnibus Sworn Statement, A Copy Of Which Should Be Attached To The Letter. 23.3 Bids Requested To Be Withdrawn In Accordance With Itb Clause 23.1 Shall Be Returned Unopened To The Bidders. A Bidder May Also Express Its Intention Not To Participate In The Bidding Through A Letter Which Should Reach And Be Stamped By The Bac Before The Deadline For Submission And Receipt Of Bids. A Bidder That Withdraws Its Bid Shall Not Be Permitted To Submit Another Bid, Directly Or Indirectly, For The Same Contract. 23.4 No Bid May Be Modified After The Deadline For Submission Of Bids. No Bid May Be Withdrawn In The Interval Between The Deadline For Submission Of Bids And The Expiration Of The Period Of Bid Validity Specified By The Bidder On The Financial Bid Form. Withdrawal Of A Bid During This Interval Shall Result In The Forfeiture Of The Bidder’s Bid Security, Pursuant To Itb Clause 18.5, And The Imposition Of Administrative, Civil And Criminal Sanctions As Prescribed By Ra 9184 And Its Irr 24. Opening And Preliminary Examination Of Bids 24.1 24.2 The Bac Shall Open The Bids In Public, Immediately After The Deadline For The Submission And Receipt Of Bids, As Specified In The Bds. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Bac Shall Take Custody Of The Bids Submitted And Reschedule The Opening Of Bids On The Next Working Day Or At The Soonest Possible Time Through The Issuance Of A Notice Of Postponement To Be Posted In The Philgeps Website Of The Procuring Entity Concerned, If Available. The Bac Shall Open The First Bid Envelopes Of Bidders In Public As Specified In The Bds To Determine Each Bidder’s Compliance With The Documents Prescribed In Itb Clause 12. For This Purpose, The Bac Shall Check The Submitted Documents Of Each Bidder Against A Checklist Of Required Documents To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion. If A Bidder Submits The Required Document, It Shall Be Rated “passed” For That Particular Requirement. In This Regard, Bids That Fail To Include Any Requirement Or Are Incomplete Or Patently Insufficient Shall Be Considered As “failed”. Otherwise, The Bac Shall Rate The Said First Bid Envelope As “passed”. 24.3 Immediately After Determining Compliance With The Requirements In The First Envelope, The Bac Shall Forthwith Open The Second Bid Envelope Of Each Remaining Eligible Bidder Whose First Bid Envelope Was Rated “passed”. The Second Envelope Of Each Complying Bidder Shall Be Opened Within The Same Day. In Case One Or More Of The Requirements In The Second Envelope Of A Particular Bid Is Missing, Incomplete Or Patently Insufficient, And/or If The Submitted Total Bid Price Exceeds The Abc Unless Otherwise Provided In Itb Clause 13.2, The Bac Shall Rate The Bid Concerned As “failed”. Only Bids That Are Determined To Contain All The Bid Requirements For Both Components Shall Be Rated “passed” And Shall Immediately Be Considered For Evaluation And Comparison 24.4 Letters Of Withdrawal Shall Be Read Out And Recorded During Bid Opening, And The Envelope Containing The Corresponding Withdrawn Bid Shall Be Returned To The Bidder Unopened. If The Withdrawing Bidder’s Representative Is In Attendance, The Original Bid And All Copies Thereof Shall Be Returned To The Representative During The Bid Opening. If The Representative Is Not In Attendance, The Bid Shall Be Returned Unopened By Registered Mail. The Bidder May Withdraw Its Bid Prior To The Deadline For The Submission And Receipt Of Bids, Provided That The Corresponding Letter Of Withdrawal Contains A Valid Authorization Requesting For Such Withdrawal, Subject To Appropriate Administrative Sanctions 24.5 If A Bidder Has Previously Secured A Certification From The Procuring Entity To The Effect That It Has Previously Submitted The Above-enumerated Class “a” Documents, The Said Certification May Be Submitted In Lieu Of The Requirements Enumerated In Itb Clause 12.1(a), Items (i) To (v). 24.6 In The Case Of An Eligible Foreign Bidder As Described In Itb Clause 5, The Class “a” Documents Described In Itb Clause 12.1(a) May Be Substituted With The Appropriate Equivalent Documents, If Any, Issued By The Country Of The Foreign Bidder Concerned. 24.7 Each Partner Of A Joint Venture Agreement Shall Likewise Submit The Requirements In Itb Clauses 12.1(a)(i) And 12.1(a)(ii). Submission Of Documents Required Under Itb Clauses 12.1(a)(iii) To 12.1(a)(v) By Any Of The Joint Venture Partners Constitutes Compliance. 24.8 The Procuring Entity Shall Prepare The Minutes Of The Proceedings Of The Bid Opening That Shall Include, As A Minimum: (a) Names Of Bidders, Their Bid Price, Bid Security, Findings Of Preliminary Examination; And (b) Attendance Sheet. The Bac Members Shall Sign The Abstract Of Bids As Read. E. Evaluation And Comparison Of Bids 25. Process To Be Confidential 25.1 Members Of The Bac, Including Its Staff And Personnel, As Well As Its Secretariat And Twg, Are Prohibited From Making Or Accepting Any Kind Of Communication With Any Bidder Regarding The Evaluation Of Their Bids Until The Issuance Of The Notice Of Award, Unless Otherwise Allowed In The Bds Or In The Case Of Itb Clause 26. 25.2 Any Effort By A Bidder To Influence The Procuring Entity In The Procuring Entity’s Decision In Respect Of Bid Evaluation, Bid Comparison Or Contract Award Will Result In The Rejection Of The Bidder’s Bid. 26. Clarification Of Bids To Assist In The Evaluation, Comparison, And Post-qualification Of The Bids, The Procuring Entity May Ask In Writing Any Bidder For A Clarification Of Its Bid. All Responses To Requests For Clarification Shall Be In Writing. Any Clarification Submitted By A Bidder In Respect To Its Bid And That Is Not In Response To A Request By The Procuring Entity Shall Not Be Considered. 27. Domestic Preference 27.1 Unless Otherwise Stated In The Bds, The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With The Following: (a) The Preference Shall Be Applied When (i) The Lowest Foreign Bid Is Lower Than The Lowest Bid Offered By A Domestic Bidder, Or (ii) The Lowest Bid Offered By A Non-philippine National Is Lower Than The Lowest Bid Offered By A Domestic Entity. (b) For Evaluation Purposes, The Lowest Foreign Bid Or The Bid Offered By A Non-philippine National Shall Be Increased By Fifteen Percent (15%). (c) In The Event That (i) The Lowest Bid Offered By A Domestic Entity Does Not Exceed The Lowest Foreign Bid As Increased, Or (ii) The Lowest Bid Offered By A Non-philippine National As Increased, Then The Procuring Entity Shall Award The Contract To The Domestic Bidder/entity At The Amount Of The Lowest Foreign Bid Or The Bid Offered By A Non-philippine National, As The Case May Be. (d) If The Domestic Entity/bidder Refuses To Accept The Award Of Contract At The Amount Of The Foreign Bid Or Bid Offered By A Non-philippine National Within Two (2) Calendar Days From Receipt Of Written Advice From The Bac, The Procuring Entity Shall Award To The Bidder Offering The Foreign Bid Or The Non-philippine National, As The Case May Be, Subject To Post-qualification And Submission Of All The Documentary Requirements Under These Bidding Documents. 27.2 A Bidder May Be Granted Preference As A Domestic Entity Subject To The Certification From The Dti (in Case Of Sole Proprietorships), Sec (in Case Of Partnerships And Corporations), Or Cda (in Case Of Cooperatives) That The (a) Sole Proprietor Is A Citizen Of The Philippines Or The Partnership, Corporation, Cooperative, Or Association Is Duly Organized Under The Laws Of The Philippines With At Least Seventy Five Percent (75%) Of Its Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, (b) Habitually Established In Business And Habitually Engaged In The Manufacture Or Sale Of The Merchandise Covered By His Bid, And (c) The Business Has Been In Existence For At Least Five (5) Consecutive Years Prior To The Advertisement And/or Posting Of The Invitation To Bid For This Project. 27.3 A Bidder May Be Granted Preference As A Domestic Bidder Subject To The Certification From The Dti That The Bidder Is Offering Unmanufactured Articles, Materials Or Supplies Of The Growth Or Production Of The Philippines, Or Manufactured Articles, Materials, Or Supplies Manufactured Or To Be Manufactured In The Philippines Substantially From Articles, Materials, Or Supplies Of The Growth, Production, Or Manufacture, As The Case May Be, Of The Philippines. 28. Detailed Evaluation And Comparison Of Bids 28.1 The Procuring Entity Will Undertake The Detailed Evaluation And Comparison Of Bids Which Have Passed The Opening And Preliminary Examination Of Bids, Pursuant To Itb Clause 24, In Order To Determine The Lowest Calculated Bid. 28.2 The Lowest Calculated Bid Shall Be Determined In Two Steps. (a) The Detailed Evaluation Of The Financial Component Of The Bids, To Establish The Correct Calculated Prices Of The Bids; And (b) The Ranking Of The Total Bid Prices As So Calculated From The Lowest To The Highest. The Bid With The Lowest Price Shall Be Identified As The Lowest Calculated Bid. 28.3 The Procuring Entity's Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. Unless Otherwise Specified In The Bds, The Bac Shall Consider The Following In The Evaluation Of Bids. (a) Completeness Of The Bid. Unless The Itb Specifically Allows Partial Bids, Bids Not Addressing Or Providing All Of The Required Items In The Schedule Of Requirements Including, Where Applicable, Bill Of Quantities, Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. In This Regard, Where A Required Item Is Provided, But No Price Is Indicated, The Same Shall Be Considered As Non-responsive, But Specifying A "0" (zero) Or A Dash (-) For The Said Item Would Mean That It Is Being Offered For Free To The Procuring Entity; And (b) Arithmetical Corrections. Consider Computational Errors And Omissions To Enable Proper Comparison Of All Eligible Bids. It May Also Consider Bid Modifications, If Allowed In The Bds. Any Adjustment Shall Be Calculated In Monetary Terms To Determine The Calculated Prices. 28.4 Based On The Detailed Evaluation Of Bids, Those That Comply With The Above-mentioned Requirements Shall Be Ranked In The Ascending Order Of Their Total Calculated Bid Prices, As Evaluated And Corrected For Computational Errors, Discounts And Other Modifications, To Identify The Lowest Calculated Bid. Total Calculated Bid Prices, As Evaluated And Corrected For Computational Errors, Discounts And Other Modifications, Which Exceed The Abc Shall Not Be Considered. 28.5 Unless Otherwise Indicated In The Bds, The Procuring Entity’s Evaluation Of Bids Shall Only Be Based On The Bid Price Quoted In The Financial Bid Form. 28.6 Bids Shall Be Evaluated On An Equal Footing To Ensure Fair Competition. For This Purpose, All Bidders Shall Be Required To Include In Their Bids The Cost Of All Taxes, Such As, But Not Limited To, Value Added Tax (vat), Income Tax, Local Taxes, And Other Fiscal Levies And Duties Which Shall Be Itemized In The Bid Form And Reflected In The Detailed Estimates. Such Bids, Including Said Taxes, Shall Be The Basis For Bid Evaluation And Comparison. 29. Post-qualification 29.1 The Procuring Entity Shall Determine To Its Satisfaction Whether The Bidder That Is Evaluated As Having Submitted The Lowest Calculated Bid (lcb) Complies With And Is Responsive To All The Requirements And Conditions Specified In Itb Clauses 5, 12, And 13. 29.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lcb, The Bidder Shall Submit The Following Documentary Requirements: (a) Latest Income And Business Tax Returns In The Form Specified In The Bds; (b) Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. Failure Of The Bidder Declared As Lowest Calculated Bid To Duly Submit The Above Requirements On Time Under This Clause Or A Finding Against The Veracity Of Such Shall Be Ground For Forfeiture Of The Bid Security And Disqualification Of The Bidder For Award. 29.3 The Determination Shall Be Based Upon An Examination Of The Documentary Evidence Of The Bidder’s Qualifications Submitted Pursuant To Itb Clauses 12 And 13, As Well As Other Information As The Procuring Entity Deems Necessary And Appropriate, Using A Non-discretionary “pass/fail” Criterion. 29.4 If The Bac Determines That The Bidder With The Lowest Calculated Bid Passes All The Criteria For Post-qualification, It Shall Declare The Said Bid As The Lowest Calculated Responsive Bid, And Recommend To The Head Of The Procuring Entity The Award Of Contract To The Said Bidder At Its Submitted Bid Price Or Its Calculated Bid Price, Whichever Is Lower. 29.5 A Negative Determination Shall Result In Rejection Of The Bidder’s Bid, In Which Event The Procuring Entity Shall Proceed To The Next Lowest Calculated Bid To Make A Similar Determination Of That Bidder’s Capabilities To Perform Satisfactorily. If The Second Bidder, However, Fails The Post Qualification, The Procedure For Post Qualification Shall Be Repeated For The Bidder With The Next Lowest Calculated Bid, And So On Until The Lowest Calculated Responsive Bid Is Determined For Contract Award. 29.6 Within A Period Not Exceeding Fifteen (15) Calendar Days From The Date Of Receipt Of The Recommendation Of The Bac, The Head Of The Procuring Entity Shall Approve Or Disapprove The Said Recommendation. 30. Reservation Clause 30.1 Notwithstanding The Eligibility Or Post-qualification Of A Bidder, The Procuring Entity Concerned Reserves The Right To Review Its Qualifications At Any Stage Of The Procurement Process If It Has Reasonable Grounds To Believe That A Misrepresentation Has Been Made By The Said Bidder, Or That There Has Been A Change In The Bidder’s Capability To Undertake The Project From The Time It Submitted Its Eligibility Requirements. Should Such Review Uncover Any Misrepresentation Made In The Eligibility And Bidding Requirements, Statements Or Documents, Or Any Changes In The Situation Of The Bidder Which Will Affect Its Capability To Undertake The Project So That It Fails The Preset Eligibility Or Bid Evaluation Criteria, The Procuring Entity Shall Consider The Said Bidder As Ineligible And Shall Disqualify It From Submitting A Bid Or From Obtaining An Award Or Contract. 30.2 Based On The Following Grounds, The Procuring Entity Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding At Any Time Prior To The Contract Award, Or Not To Award The Contract, Without Thereby Incurring Any Liability, And Make No Assurance That A Contract Shall Be Entered Into As A Result Of The Bidding: (a) If There Is Prima Facie Evidence Of Collusion Between Appropriate Public Officers Or Employees Of The Procuring Entity, Or Between The Bac And Any Of The Bidders, Or If The Collusion Is Between Or Among The Bidders Themselves, Or Between A Bidder And A Third Party, Including Any Act Which Restricts, Suppresses Or Nullifies Or Tends To Restrict, Suppress Or Nullify Competition; (b) If The Procuring Entity’s Bac Is Found To Have Failed In Following The Prescribed Bidding Procedures; Or (c) For Any Justifiable And Reasonable Ground Where The Award Of The Contract Will Not Redound To The Benefit Of The Gop As Follows: (i) If The Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially Or Technically Feasible As Determined By The Head Of The Procuring Entity; (ii) If The Project Is No Longer Necessary As Determined By The Head Of The Procuring Entity; And (iii) If The Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Procuring Entity. 30.3 In Addition, The Procuring Entity May Likewise Declare A Failure Of Bidding When: (a) No Bids Are Received; (b) All Prospective Bidders Are Declared Ineligible; (c) All Bids Fail To Comply With All The Bid Requirements Or Fail Post-qualification; Or (d) The Bidder With The Lowest Calculated Responsive Bid Refuses, Without Justifiable Cause To Accept The Award Of Contract, And No Award Is Made In Accordance With Section 40 Of The Irr Of Ra 9184. F. Award Of Contract 31. Contract Award 31.1 Subject To Itb Clause 29, The Procuring Entity Shall Award The Contract To The Bidder Whose Bid Has Been Determined To Be The Lcrb. 31.2 Prior To The Expiration Of The Period Of Bid Validity, The Procuring Entity Shall Notify The Successful Bidder In Writing That Its Bid Has Been Accepted, Through A Notice Of Award Received Personally Or Sent By Registered Mail Or Electronically, Receipt Of Which Must Be Confirmed In Writing Within Two (2) Days By The Bidder With The Lcrb And Submitted Personally Or Sent By Registered Mail Or Electronically To The Procuring Entity. 31.3 Notwithstanding The Issuance Of The Notice Of Award, Award Of Contract Shall Be Subject To The Following Conditions: (a) Submission Of The Valid Jva, If Applicable, Within Ten (10) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That The Bidder Has The Lcrb; (b) Posting Of The Performance Security In Accordance With Itb Clause 33; (c) Signing Of The Contract As Provided In Itb Clause 32; And (d) Approval By Higher Authority, If Required. 31.4 At The Time Of Contract Award, The Procuring Entity Shall Not Increase Or Decrease The Quantity Of Goods Originally Specified In Section Vi – Schedule Of Requirements. 32. Signing Of The Contract 32.1 At The Same Time As The Procuring Entity Notifies The Successful Bidder That Its Bid Has Been Accepted, The Procuring Entity Shall Send The Contract Form To The Bidder, Which Contract Has Been Provided In The Bidding Documents, Incorporating Therein All Agreements Between The Parties. 32.2 Within Ten (10) Calendar Days From Receipt Of The Notice Of Award, The Successful Bidder Shall Post The Required Performance Security And Sign And Date The Contract And Return It To The Procuring Entity. 32.3 The Procuring Entity Shall Enter Into Contract With The Successful Bidder Within The Same Ten (10) Calendar Day Period Provided That All The Documentary Requirements Are Complied With. 32.4 The Following Documents Shall Form Part Of The Contract. (a) Contract Agreement; (b) Bidding Documents; (c) Winning Bidder’s Bid, Including The Technical And Financial Proposals, And All Other Documents/statements Submitted; (d) Performance Security; (e) Notice Of Award Of Contract; And (f) Other Contract Documents That May Be Required By Existing Laws And/or Specified In The Bds. 33. Performance Security 33.1 To Guarantee The Faithful Performance By The Winning Bidder Of Its Obligations Under The Contract, It Shall Post A Performance Security Within A Maximum Period Of Ten (10) Calendar Days From The Receipt Of The Notice Of Award From The Procuring Entity And In No Case Later Than The Signing Of The Contract. 33.2 The Procuring Entity Shall Prescribe At Least One (1) Acceptable Form Of Performance Security Taken From The Categories Below That Bidders May Opt To Use, Denominated In Philippine Pesos And Posted In Favor Of The Procuring Entity: Form Of Performance Security Amount Of Performance Security (not Less Than The Percentage Of The Total Contract Price) (a) Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank Five Percent (5%) (b) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank. (c) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Thirty Percent (30%) (d) Performance Securing Declaration (psd) None 33.3 Performance Security As Indicated In Section 17.1 (k) And 39 Of The 2016 Revised Irr Of Ra No. 9184, While Includes The Performance Securing Declaration (psd) As An Alternative Performance Security During A State Of Calamity Or Imposition Of Community Quarantine Pursuant To Gppb Resolution No. 09-2020. Failure Of The Successful Bidder To Comply With The Above-mentioned Requirement Shall Constitute Sufficient Ground For The Annulment Of The Award And Forfeiture Of The Bid Security, In Which Event The Procuring Entity Shall Initiate And Complete The Post Qualification Of The Second Lowest Calculated Bid. The Procedure Shall Be Repeated Until The Lcrb Is Identified And Selected For Contract Award. However If No Bidder Passed Post-qualification, The Bac Shall Declare The Bidding A Failure And Conduct A Re-bidding With Re-advertisement. 34. Notice To Proceed 34.1 Within Seven (7) Calendar Days From The Date Of Approval Of The Contract By The Appropriate Government Approving Authority, The Procuring Entity Shall Issue Its Notice To Proceed Together With A Copy Or Copies Of The Approved Contract To The Successful Bidder. All Notices Called For By The Terms Of The Contract Shall Be Effective Only At The Time Of Receipt Thereof By The Successful Bidder. 34.2 The Contract Effectivity Date Shall Be Provided In The Notice To Proceed By The Procuring Entity, Which Date Shall Not Be Later Than Seven (7) Calendar Days From The Issuance Of The Notice To Proceed. 35. Protest Mechanism Decision Of The Procuring Entity At Any Stage Of The Procurement Process May Be Questioned In Accordance With Section 55 Of The Revised Implementing Rules And Regulations Of Republic Act 9184. Section Iii – Bid Data Sheet Itb Clause 1.1 The Procuring Entity Is The Local Government Of Badiangan, Iloilo 1.2 The Reference Is: Supply And Delivery Of Two (2) Units Utility Van For Use Of Municipality Of Badiangan, Municipal Hall, Badiangan, Iloilo. Project Identification No. 2024 – 057 – B. 2.0 The Funding Source Is Through The General Fund Of The Local Government Of Badiangan, Iloilo In The Amount Of P 1,800,000.00. 5.1 No Further Instructions. 5.2 None Of The Circumstances Mentioned In The Itb Clause Exists In This Project. Foreign Bidders, Except Those Falling Under Itb Clause 5.2(b), May Not Participate In This Project. 5.4 The Bidder Must Have Completed, Within The Period Specified In The Invitation To Bid And Itb Clause 12.1(a)(ii), A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. For This Purpose, Similar Contracts Shall Refer To The Supply And Delivery Of Goods That Is/are Similar In Type And Brand To The Goods Being Bidded-out. 5.5 No Further Instructions. 6.3 No Further Instructions. 7 No Further Instructions. 8.1 Subcontracting Is Not Allowed. 8.2 Not Applicable. 9.1 Not Applicable. 10.1 The Procuring Entity’s Address Is: Badiangan Municipal Hall R.c. Tabiana St., Poblacion, Badiangan, Iloilo 5033 Contact Person: Mr. Humbert S. Recomono Head: Bac Secretariat Municipal Hall, Badiangan, Iloilo Tel. No. (033) 320-7809 C.p. No. 09198501252 12.1 The First Envelope Shall Contain The Eligibility And Technical Documents Stated In The Itb Clause. However, If The Bidder Maintains A Current And Updated File Of Its Class “a” Documents With The Bac Of The Local Government Of Badiangan, Iloilo, A Certification To That Effect Issued By Its Bac May Be Submitted In Lieu Of The Class “a” Documents. 12.1(a)(i) No Other Acceptable Proof Of Registration Is Recognized. 12.1(a)(ii) The Statement Of All Ongoing And Single Largest Completed Government And Private Contracts Shall Include All Such Contracts Within The Last Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 13.1 No Additional Requirements. 13.2 The Approved Budget For The Contract (abc) Is: P 1,800,000.00 Any Bid With A Financial Component Exceeding This Amount Shall Not Be Accepted. 15.4(a)(iii) No Incidental Services Required. 15.4(b) Not Applicable. 15.5 Bid Prices Shall Be Fixed. Adjustable Price Proposals Shall Be Treated As Non-responsive And Shall Be Rejected. 15.6 Extraordinary Circumstances Refer To Events That May Be Determined By The National Economic And Development Authority In Accordance With The Civil Code Of The Philippines, And Upon The Recommendation Of The Procuring Entity. 16.1(b) The Bid Prices For Goods Supplied From Outside Of The Philippines Shall Be Quoted In Philippine Pesos. 16.3 No Further Instructions. 17.1 Bids Shall Be Valid Until 120 Calendar Days After Bidding. 18.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration (bsd), Or Any Of The Following Forms: 1. P (2% Of Abc), If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or 2. P (5% Of Abc), If Bid Security Is In Surety Bond 18.2 The Bid Security Shall Be Valid Until 120 Calendar Days After Bidding. 18.5(a)(iv) The Following Are Additional Grounds For Forfeiture Of Bid Security: 1. Submission Of Eligibility Requirements Containing False Information Or Falsified Documents. 2. Submission Of Bids That Contain False Information Or Falsified Documents, Or The Concealment Of Such Information In The Bids In Order To Influence The Outcome Of Eligibility Screening Or Any Other Stage Of The Public Bidding. 3. Allowing The Use Of One’s Name, Or Using The Name Of Another For Purposes Of Public Bidding. 4. Withdrawal Of A Bid, Or Refusal To Accept An Award, Or Enter Into Contract With The Government Without Justifiable Cause, After The Bidder Had Been Adjudged As Having Submitted The Lowest Calculated And Responsive Bid. 5. Refusal Or Failure To Post The Required Performance Security Within The Prescribed Time. 6. Refusal To Clarify Or Validate In Writing Its Bid During Post-qualification Within A Period Of Seven (7) Calendar Days From Receipt Of The Request For Clarification. 7. Any Documented Unsolicited Attempt By A Bidder To Unduly Influence The Outcome Of The Bidding In His Favor. 8. Failure Of The Potential Joint Venture Partners To Enter Into The Joint Venture After The Bid Is Declared As Successful. 9. All Other Acts That Tend To Defeat The Purpose Of The Competitive Bidding, Such As Habitually Withdrawing From Bidding, Submitting Late Bids Or Patently Insufficient Bid, For At Least Three (3) Times Within A Year, Except For Valid Reasons. 18.5(b)(iii) No Further Instructions. 20.1 The Documents Enclosed In The Original Bid Should Be Original Copy Or Duly Stamped Certified True/ Machine Copy With Printed Name And Signature Of The Owner Of The Company Or The Duly Authorized Representative Of The Company As Indicated In The Special Power Of Attorney (spa) Or Secretary’s Certificate. The Duly Authorized Representative Should Have A Specimen Signature In The Spa Or Secretary’s Certificate. 20.3 Each Bidder Shall Submit One (1) Original And Two (2) Copies Of The First And Second Components Of Its Bid. The Photocopied Copies Of The Documents Enclosed In The First And Second Components Of The Bid Should Be Duly Stamped Certified True/ Machine Copy With Printed Name And Signature Of The Owner Of The Company Or The Duly Authorized Representative Of The Company As Indicated In The Special Power Of Attorney (spa) Or Secretary’s Certificate. The Duly Authorized Representative Should Have A Specimen Signature In The Spa Or Secretary’s Certificate. 21 The Address For Submission Of Bids Is: Municipal Budget Office, Municipal Hall, Badiangan, Iloilo The Deadline For Submission Of Bid Is: November 25, 2024; 8:30 A.m. 24.1 The Place Of Bid Opening Is: Municipal Social Hall, Badiangan, Iloilo The Date And Time Of Bid Opening Is: November 25, 2024; 9:00 A.m. 25.1 No Further Instructions. 27.1 No Further Instructions. 28.3 No Further Instructions. 28.3(b) Modification Of Bids Is Not Allowed. 28.5 No Further Instructions. 29.2(a) Only Tax Returns Filed And Taxes Paid Through The Bir Electronic Filing And Payment System (efps) Shall Be Accepted. Note: The Latest Income And Business Tax Returns Are Those Within The Last Six Months Preceding The Date Of Bid Submission. 29.2(d) None Required. 32.4(g) None Required. 34.2 The Effective Date Of The Contract Is Seven (7) Calendar Days Upon Receipt Of Notice To Proceed Issued By The Procuring Entity. Section Iv. General Conditions Of Contract 1. Definitions 1.1 In This Contract, The Following Terms Shall Be Interpreted As Indicated. (a) “the Contract” Means The Agreement Entered Into Between The Procuring Entity And The Supplier, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. (b) “the Contract Price” Means The Price Payable To The Supplier Under The Contract For The Full And Proper Performance Of Its Contractual Obligations. (c) “the Goods” Means All Of The Supplies, Equipment, Machinery, Spare Parts, Other Materials And/or General Support Services Which The Supplier Is Required To Provide To The Procuring Entity Under The Contract. (d) “the Services” Means Those Services Ancillary To The Supply Of The Goods, Such As Transportation And Insurance, And Any Other Incidental Services, Such As Installation, Commissioning, Provision Of Technical Assistance, Training, And Other Such Obligations Of The Supplier Covered Under The Contract. (e) “gcc” Means The General Conditions Of Contract Contained In This Section. (f) “scc” Means The Special Conditions Of Contract. (g) “the Procuring Entity” Means The Organization Purchasing The Goods, As Named In The Scc,. (h) “the Procuring Entity’s Country” Is The Philippines. (i) “the Supplier” Means The Individual Contractor, Manufacturer, Distributor, Or Firm Supplying/manufacturing The Goods And Services Under This Contract And Named In The Scc, (j) The “funding Source” Means The Organization Named In The Scc,. (k) “the Project Site,” Where Applicable, Means The Place Or Places Named In The Scc, (l) “day” Means Calendar Day. (m) The “effective Date” Of The Contract Will Be The Date Of Receipt By The Supplier Of The Notice To Proceed Or The Date Provided In The Notice To Proceed. Performance Of All Obligations Shall Be Reckoned From The Effective Date Of The Contract. (n) “verified Report” Refers To The Report Submitted By The Implementing Unit To The Head Of The Procuring Entity Setting Forth Its Findings As To The Existence Of Grounds Or Causes For Termination And Explicitly Stating Its Recommendation For The Issuance Of A Notice To Terminate. 2. Corrupt, Fraudulent, Collusive, And Coercive Practices 2.1 The Procuring Entity As Well As The Bidders, Contractors, Or Suppliers Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of This Contract. In Pursuance Of This Policy, The Procuring Entity. (a) Defines, For The Purposes Of This Provision, The Terms Set Forth Below As Follows (i) "corrupt Practice" Means Behavior On The Part Of Officials In The Public Or Private Sectors By Which They Improperly And Unlawfully Enrich Themselves, Others, Or Induce Others To Do So, By Misusing The Position In Which They Are Placed, And It Includes The Offering, Giving, Receiving, Or Soliciting Of Anything Of Value To Influence The Action Of Any Such Official In The Procurement Process Or In Contract Execution; Entering, On Behalf Of The Government, Into Any Contract Or Transaction Manifestly And Grossly Disadvantageous To The Same, Whether Or Not The Public Officer Profited Or Will Profit Thereby, And Similar Acts As Provided In Republic Act 3019. (ii) "fraudulent Practice" Means A Misrepresentation Of Facts In Order To Influence A Procurement Process Or The Execution Of A Contract To The Detriment Of The Procuring Entity, And Includes Collusive Practices Among Bidders (prior To Or After Bid Submission) Designed To Establish Bid Prices At Artificial, Non-competitive Levels And To Deprive The Procuring Entity Of The Benefits Of Free And Open Competition. (iii) “collusive Practices” Means A Scheme Or Arrangement Between Two Or More Bidders, With Or Without The Knowledge Of The Procuring Entity, Designed To Establish Bid Prices At Artificial, Non-competitive Levels. (iv) “coercive Practices “ Means Harming Or Threatening To Harm, Directly Or Indirectly, Persons, Or Their Property To Influence Their Participation In A Procurement Process, Or Effect The Execution Of A Contract; (v) “obstructive Practice” Is (aa) Deliberately Destroying, Falsifying, Altering Or Concealing Of Evidence Material To An Administrative Proceedings Or Investigation Or Making False Statements To Investigators In Order To Materially Impede An Administrative Proceedings Or Investigation Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Into Allegations Of A Corrupt, Fraudulent, Coercive Or Intimidating Any Party To Prevent If From Disclosing Its Knowledge Of Matters Relevant To The Administrative Proceedings Or Investigation Or From Pursuing Such Proceedings Or Investigation; Or (bb) Acts Intended To Materially Impede The Exercise Of The Inspection And Audit Rights Of The Procuring Entity Or Any Foreign Government/foreign Or International Financing Institution Herein. (b) Will Reject A Proposal For Award If It Determines That The Bidder Recommended For Award Has Engaged In Any Of The Practices Mentioned In This Clause For Purposes Of Competing For The Contract. 3. Inspection And Audit By The Funding Source The Supplier Shall Permit The Funding Source To Inspect The Supplier’s Accounts And Records Relating To The Performance Of The Supplier And To Have Them Audited By Auditors Appointed By The Funding Source, If So Required By The Funding Source. 4. Governing Law And Language 4.1 This Contract Shall Be Interpreted In Accordance With The Laws Of The Republic Of The Philippines. 4.2 This Contract Has Been Executed In The English Language, Which Shall Be The Binding And Controlling Language For All Matters Relating To The Meaning Or Interpretation Of This Contract. All Correspondence And Other Documents Pertaining To This Contract Exchanged By The Parties Shall Be Written In English. 5. Notices 5.1 Any Notice, Request, Or Consent Required Or Permitted To Be Given Or Made Pursuant To This Contract Shall Be In Writing. Any Such Notice, Request, Or Consent Shall Be Deemed To Have Been Given Or Made When Received By The Concerned Party, Either In Person Or Through An Authorized Representative Of The Party To Whom The Communication Is Addressed, Or When Sent By Registered Mail, Telex, Telegram, Or Facsimile To Such Party At The Address Specified In The Scc, Which Shall Be Effective When Delivered And Duly Received Or On The Notice’s Effective Date, Whichever Is Later. 5.2 A Party May Change Its Address For Notice Hereunder By Giving The Other Party Notice Of Such Change Pursuant To The Provisions Listed In The Scc For Gcc Clause 5.1. 6. Scope Of Contract 6.1 The Goods And Related Services To Be Provided Shall Be As Specified In Section Vi – Schedule Of Requirements. 6.2 This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. Any Additional Requirements For The Completion Of This Contract Shall Be Provided In The Scc 7. Subcontracting 7.1 Subcontracting Of Any Portion Of The Goods, If Allowed In The Bds, Does Not Relieve The Supplier Of Any Liability Or Obligation Under This Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants Or Workmen As Fully As If These Were The Supplier’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants Or Workmen. 7.2 Subcontractors Disclosed And Identified During The Bidding May Be Changed During The Implementation Of This Contract, Subject To Compliance With The Required Qualifications And The Approval Of The Procuring Entity. 8. Procuring Entity’s Responsibilities 8.1 Whenever The Performance Of The Obligations In This Contract Requires That The Supplier Obtain Permits, Approvals, Import, And Other Licenses From Local Public Authorities, The Procuring Entity Shall, If So Needed By The Supplier, Make Its Best Effort To Assist The Supplier In Complying With Such Requirements In A Timely And Expeditious Manner. 8.2 The Procuring Entity Shall Pay All Costs Involved In The Performance Of Its Responsibilities In Accordance With Gcc Clause 6. 9. Prices Prices Charged By The Supplier For Goods Delivered And/or Services Performed Under This Contract Shall Not Vary From The Prices Quoted By The Supplier In Its Bid, With The Exception Of Any Change In Price Resulting From A Change Order Issued In Accordance With Gcc Clause 29, Or If Applicable, Adjustments Authorized In Accordance With The Price Adjustment Provisions Specified In The Scc.. 10. Payment 10.1 Unless Otherwise Specified In The Scc, Payments Shall Be Made Only Upon A Certification By The Head Of The Procuring Entity To The Effect That The Goods Have Been Rendered Or Delivered In Accordance With The Terms Of This Contract And Have Been Duly Inspected And Accepted. Except With The Prior Approval Of The President No Payment Shall Be Made For Services Not Yet Rendered Or For Supplies And Materials Not Yet Delivered Under This Contract. Ten Percent (10%) Of The Amount Of Each Payment Shall Be Retained By The Procuring Entity To Cover The Supplier’s Warranty Obligations Under This Contract As Described In Gcc Clause 17. 10.2 The Supplier’s Request(s) For Payment Shall Be Made To The Procuring Entity In Writing, Accompanied By An Invoice Describing, As Appropriate, The Goods Delivered And/or Services Performed, And By Documents Submitted Pursuant To The Scc Provision For Gcc Clause 6.2, And Upon Fulfillment Of Other Obligations Stipulated In This Contract. 10.3 Pursuant To Gcc Clause 10.2, Payments Shall Be Made Promptly By The Procuring Entity, But In No Case Later Than Sixty (60) Days After Submission Of An Invoice Or Claim By The Supplier. 10.4 Unless Otherwise Specified In The Scc, The Currency In Which Payment Is Made To The Supplier Under This Contract Shall Be In Philippine Pesos. 11. Advance Payment 11.1 Advance Payment Shall Be Made Only After Prior Approval Of The President, And Shall Not Exceed Fifteen Percent (15%) Of The Contract Amount, Unless Otherwise Directed By The President Or In Cases Allowed Under Annex “d” Of Ra 9184. 11.2 For Goods Supplied From Abroad, The Terms Of Payment Shall Be As Follows: (a) On Contract Signature: Fifteen Percent (15%) Of The Contract Price Shall Be Paid Within Sixty (60) Days From Signing Of The Contract And Upon Submission Of A Claim And A Bank Guarantee For The Equivalent Amount Valid Until The Goods Are Delivered And In The Form Provided In Section Viii. Bidding Forms. (b) On Delivery: Sixty-five Percent (65%) Of The Contract Price Shall Be Paid To The Supplier Within Sixty (60) Days After The Date Of Receipt Of The Goods And Upon Submission Of The Documents (i) Through (vi) Specified In The Scc Provision On Delivery And Documents. (c) On Acceptance: The Remaining Twenty Percent (20%) Of The Contract Price Shall Be Paid To The Supplier Within Sixty (60) Days After The Date Of Submission Of The Acceptance And Inspection Certificate For The Respective Delivery Issued By The Procuring Entity’s Authorized Representative. In The Event That No Inspection Or Acceptance Certificate Is Issued By The Procuring Entity’s Authorized Representative Within Forty Five (45) Days Of The Date Shown On The Delivery Receipt The Supplier Shall Have The Right To Claim Payment Of The Remaining Twenty Percent (20%) Subject To The Procuring Entity’s Own Verification Of The Reason(s) For The Failure To Issue Documents (vii) And (viii) As Described In The Scc Provision On Delivery And Documents. 11.3 All Progress Payments Shall First Be Charged Against The Advance Payment Until The Latter Has Been Fully Exhausted. 12. Taxes And Duties The Supplier, Whether Local Or Foreign, Shall Be Entirely Responsible For All The Necessary Taxes, Stamp Duties, License Fees, And Other Such Levies Imposed For The Completion Of This Contract. 13. Performance Security 13.1 Unless Otherwise Specified In The Scc, Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any The Forms Prescribed In The Itb Clause 33.2. 13.2 The Performance Security Posted In Favor Of The Procuring Entity Shall Be Forfeited In The Event It Is Established That The Winning Bidder Is In Default In Any Of Its Obligations Under The Contract. 13.3 The Performance Security Shall Remain Valid Until Issuance By The Procuring Entity Of The Certificate Of Final Acceptance. 13.4 Unless Otherwise Specified In The Scc, The Performance Security May Be Released By The Procuring Entity And Returned To The Supplier After The Issuance Of The Certificate Of Final Acceptance Subject To The Following Conditions. (a) There Are No Pending Claims Against The Supplier Or The Surety Company Filed By The Procuring Entity; (b) The Supplier Has No Pending Claims For Labor And Materials Filed Against It; And (c) Other Terms Specified In The Scc 13.5 In Case Of A Reduction Of The Contract Value, The Procuring Entity Shall Allow A Proportional Reduction In The Original Performance Security, Provided That Any Such Reduction Is More Than Ten Percent (10%) And That The Aggregate Of Such Reductions Is Not More Than Fifty Percent (50%) Of The Original Performance Security. 14. Use Of Contract Documents And Information 14.1 The Supplier Shall Not, Except For Purposes Of Performing The Obligations In This Contract, Without The Procuring Entity’s Prior Written Consent, Disclose This Contract, Or Any Provision Thereof, Or Any Specification, Plan, Drawing, Pattern, Sample, Or Information Furnished By Or On Behalf Of The Procuring Entity. Any Such Disclosure Shall Be Made In Confidence And Shall Extend Only As Far As May Be Necessary For Purposes Of Such Performance. 14.2 Any Document, Other Than This Contract Itself, Enumerated In Gcc Clause 14.1shall Remain The Property Of The Procuring Entity And Shall Be Returned (all Copies) To The Procuring Entity On Completion Of The Supplier’s Performance Under This Contract If So Required By The Procuring Entity. 15. Standards The Goods Provided Under This Contract Shall Conform To The Standards Mentioned In The Section Vii – Technical Specifications,; And, When No Applicable Standard Is Mentioned, To The Authoritative Standards Appropriate To The Goods’ Country Of Origin. Such Standards Shall Be The Latest Issued By The Institution Concerned. 16. Inspection And Tests 16.1 The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Contract Specifications At No Extra Cost To The Procuring Entity. The Scc And Section Vii – Technical Specifications Shall Specify What Inspections And/or Tests The Procuring Entity Requires And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. 16.2 If Applicable, The Inspections And Tests May Be Conducted On The Premises Of The Supplier Or Its Subcontractor(s), At Point Of Delivery, And/or At The Goods’ Final Destination. If Conducted On The Premises Of The Supplier Or Its Subcontractor(s), All Reasonable Facilities And Assistance, Including Access To Drawings And Production Data, Shall Be Furnished To The Inspectors At No Charge To The Procuring Entity. 16.3 The Procuring Entity Or Its Designated Representative Shall Be Entitled To Attend The Tests And/or Inspections Referred To In This Clause Provided That The Procuring Entity Shall Bear All Of Its Own Costs And Expenses Incurred In Connection With Such Attendance Including, But Not Limited To, All Traveling And Board And Lodging Expenses. 16.4 The Procuring Entity May Reject Any Goods Or Any Part Thereof That Fail To Pass Any Test And/or Inspection Or Do Not Conform To The Specifications. The Supplier Shall Either Rectify Or Replace Such Rejected Goods Or Parts Thereof Or Make Alterations Necessary To Meet The Specifications At No Cost To The Procuring Entity, And Shall Repeat The Test And/or Inspection, At No Cost To The Procuring Entity, Upon Giving A Notice Pursuant To Gcc Clause 5. 16.5 The Supplier Agrees That Neither The Execution Of A Test And/or Inspection Of The Goods Or Any Part Thereof, Nor The Attendance By The Procuring Entity Or Its Representative, Shall Release The Supplier From Any Warranties Or Other Obligations Under This Contract. 17. Warranty 17.1 The Supplier Warrants That The Goods Supplied Under The Contract Are New, Unused, Of The Most Recent Or Current Models, And That They Incorporate All Recent Improvements In Design And Materials, Except When The Technical Specifications Required By The Procuring Entity Provides Otherwise. 17.2 The Supplier Further Warrants That All Goods Supplied Under This Contract Shall Have No Defect, Arising From Design, Materials, Or Workmanship Or From Any Act Or Omission Of The Supplier That May Develop Under Normal Use Of The Supplied Goods In The Conditions Prevailing In The Country Of Final Destination. 17.3 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier For A Minimum Period Specified In The Scc. The Obligation For The Warranty Shall Be Covered By, At The Supplier’s Option, Either Retention Money In An Amount Equivalent To At Least One Percent (1%) Of Every Progress Payment, Or A Special Bank Guarantee Equivalent To At Least One Percent (1%) Of The Contract Price Or Other Such Amount If So Specified In Thescc. The Said Amounts Shall Only Be Released After The Lapse Of The Warranty Period Specified In The Scc; Provided, However, That The Supplies Delivered Are Free From Patent And Latent Defects And All The Conditions Imposed Under This Contract Have Been Fully Met. 17.4 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Within The Period Specified In The Scc And With All Reasonable Speed, Repair Or Replace The Defective Goods Or Parts Thereof, Without Cost To The Procuring Entity 17.5 If The Supplier, Having Been Notified, Fails To Remedy The Defect(s) Within The Period Specified In Gcc Clause 17.4, The Procuring Entity May Proceed To Take Such Remedial Action As May Be Necessary, At The Supplier’s Risk And Expense And Without Prejudice To Any Other Rights Which The Procuring Entity May Have Against The Supplier Under The Contract And Under The Applicable Law 18 Delays In The Supplier’s Performance 18.1 Delivery Of The Goods And/or Performance Of Services Shall Be Made By The Supplier In Accordance With The Time Schedule Prescribed By The Procuring Entity In Section Vi – Schedule Of Requirements. 18.2 If At Any Time During The Performance Of This Contract, The Supplier Or Its Subcontractor(s) Should Encounter Conditions Impeding Timely Delivery Of The Goods And/or Performance Of Services, The Supplier Shall Promptly Notify The Procuring Entity In Writing Of The Fact Of The Delay, Its Likely Duration And Its Cause(s). As Soon As Practicable After Receipt Of The Supplier’s Notice, And Upon Causes Provided For Under Gcc Clause 22, The Procuring Entity Shall Evaluate The Situation And May Extend The Supplier’s Time For Performance, In Which Case The Extension Shall Be Ratified By The Parties By Amendment Of Contract. 18.3 Except As Provided Under Gcc Clause 22, A Delay By The Supplier In The Performance Of Its Obligations Shall Render The Supplier Liable To The Imposition Of Liquidated Damages Pursuant To Gcc Clause 19, Unless An Extension Of Time Is Agreed Upon Pursuant To Gcc Clause 29 Without The Application Of Liquidated Damages. 19. Liquidated Damages Subject To Gcc Clause 18 And 22, If The Supplier Fails To Satisfactorily Deliver Any Or All Of The Goods And/or To Perform The Services Within The Period(s) Specified In This Contract Inclusive Of Duly Granted Time Extensions If Any, The Procuring Entity Shall, Without Prejudice To Its Other Remedies Under This Contract And Under The Applicable Law, Deduct From The Contract Price, As Liquidated Damages, A Sum Equivalent To The Percentage Specified In The Scc Of The Delivered Price Of The Delayed Goods Or Unperformed Services For Each Week Or Part Thereof Of Delay Until Actual Delivery Or Performance, Up To A Maximum Deduction Of The Percentage Specified In The Scc. Once The Maximum Is Reached, The Procuring Entity Shall Rescind The Contract Pursuant To Gcc Clause 23, Without Prejudice To Other Courses Of Action And Remedies Open To It. 20. Settlement Of Disputes 20.1 If Any Dispute Or Difference Of Any Kind Whatsoever Shall Arise Between The Procuring Entity And The Supplier In Connection With Or Arising Out Of This Contract, The Parties Shall Make Every Effort To Resolve Amicably Such Dispute Or Difference By Mutual Consultation. 20.2 If After Thirty (30) Days, The Parties Have Failed To Resolve Their Dispute Or Difference By Such Mutual Consultation, Then Either The Procuring Entity Or The Supplier May Give Notice To The Other Party Of Its Intention To Commence Arbitration, As Hereinafter Provided, As To The Matter In Dispute, And No Arbitration In Respect Of This Matter May Be Commenced Unless Such Notice Is Given. 20.3 Any Dispute Or Difference In Respect Of Which A Notice Of Intention To Commence Arbitration Has Been Given In Accordance With This Clause Shall Be Settled By Arbitration. Arbitration May Be Commenced Prior To Or After Delivery Of The Goods Under This Contract. 20.4 Arbitration Proceedings Shall Be Conducted In Accordance With The Rules Of Procedure Specified In The Scc. 20.5 Notwithstanding Any Reference To Arbitration Herein, The Parties Shall Continue To Perform Their Respective Obligations Under The Contract Unless They Otherwise Agree; And The Procuring Entity Shall Pay The Supplier Any Monies Due The Supplier. 21 Liability Of The Supplier 21.1 Subject To Additional Provisions, If Any, Set Forth In The Scc, The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. 21.2 Except In Cases Of Criminal Negligence Or Willful Misconduct, And In The Case Of Infringement Of Patent Rights, If Applicable, The Aggregate Liability Of The Supplier To The Procuring Entity Shall Not Exceed The Total Contract Price, Provided That This Limitation Shall Not Apply To The Cost Of Repairing Or Replacing Defective Equipment. 22. Force Majeure 22.1 The Supplier Shall Not Be Liable For Forfeiture Of Its Performance Security, Liquidated Damages, Or Termination For Default If And To The Extent That Its Delay In Performance Or Other Failure To Perform Its Obligations Under The Contract Is The Result Of A Force Majeure. 22.2 For Purposes Of This Contract The Terms “force Majeure” And “fortuitous Event” May Be Used Interchangeably. In This Regard, A Fortuitous Event Or Force Majeure Shall Be Interpreted To Mean An Event Which The Contractor Could Not Have Foreseen, Or Which Though Foreseen, Was Inevitable. It Shall Not Include Ordinary Unfavorable Weather Conditions; And Any Other Cause The Effects Of Which Could Have Been Avoided With The Exercise Of Reasonable Diligence By The Contractor. 22.3 If A Force Majeure Situation Arises, The Supplier Shall Promptly Notify The Procuring Entity In Writing Of Such Condition And The Cause Thereof. Unless Otherwise Directed By The Procuring Entity In Writing, The Supplier Shall Continue To Perform Its Obligations Under The Contract As Far As Is Reasonably Practical, And Shall Seek All Reasonable Alternative Means For Performance Not Prevented By The Force Majeure. 23. Termination For Default 23.1 The Procuring Entity Shall Terminate This Contract For Default When Any Of The Following Conditions Attends Its Implementation. (a) Outside Of Force Majeure, The Supplier Fails To Deliver Or Perform Any Or All Of The Goods Within The Period(s) Specified In The Contract, Or Within Any Extension Thereof Granted By The Procuring Entity Pursuant To A Request Made By The Supplier Prior To The Delay, And Such Failure Amounts To At Least Ten Percent (10%) Of The Contact Price; (b) As A Result Of Force Majeure, The Supplier Is Unable To Deliver Or Perform Any Or All Of The Goods, Amounting To At Least Ten Percent (10%) Of The Contract Price, For A Period Of Not Less Than Sixty (60) Calendar Days After Receipt Of The Notice From The Procuring Entity Stating That The Circumstance Of Force Majeure Is Deemed To Have Ceased; Or (c) The Supplier Fails To Perform Any Other Obligation Under The Contract.. 23.2 In The Event The Procuring Entity Terminates This Contract In Whole Or In Part, For Any Of The Reasons Provided Under Gcc Clauses 23 To 26, The Procuring Entity May Procure, Upon Such Terms And In Such Manner As It Deems Appropriate, Goods Or Services Similar To Those Undelivered, And The Supplier Shall Be Liable To The Procuring Entity For Any Excess Costs For Such Similar Goods Or Services. However, The Supplier Shall Continue Performance Of This Contract To The Extent Not Terminated. 23.3 In Case The Delay In The Delivery Of The Goods And/or Performance Of The Services Exceeds A Time Duration Equivalent To Ten Percent (10%) Of The Specified Contract Time Plus Any Time Extension Duly Granted To The Supplier, The Procuring Entity May Terminate This Contract, Forfeit The Supplier's Performance Security And Award The Same To A Qualified Supplier. 24. Termination For Insolvency The Procuring Entity Shall Terminate This Contract If The Supplier Is Declared Bankrupt Or Insolvent As Determined With Finality By A Court Of Competent Jurisdiction. In This Event, Termination Will Be Without Compensation To The Supplier, Provided That Such Termination Will Not Prejudice Or Affect Any Right Of Action Or Remedy Which Has Accrued Or Will Accrue Thereafter To The Procuring Entity And/or The Supplier. 25. Termination For Convenience 25.1 The Procuring Entity May Terminate This Contract, In Whole Or In Part, At Any Time For Its Convenience. The Head Of The Procuring Entity May Terminate A Contract For The Convenience Of The Government If He Has Determined The Existence Of Conditions That Make Project Implementation Economically, Financially Or Technically Impractical And/or Unnecessary, Such As, But Not Limited To, Fortuitous Event(s) Or Changes In Law And National Government Policies. 25.2 The Goods That Have Been Delivered And/or Performed Or Are Ready For Delivery Or Performance Within Thirty (30) Calendar Days After The Supplier’s Receipt Of Notice To Terminate Shall Be Accepted By The Procuring Entity At The Contract Terms And Prices. For Goods Not Yet Performed And/or Ready For Delivery, The Procuring Entity May Elect: (a) To Have Any Portion Delivered And/or Performed And Paid At The Contract Terms And Prices; And/or (b) To Cancel The Remainder And Pay To The Supplier An Agreed Amount For Partially Completed And/or Performed Goods And For Materials And Parts Previously Procured By The Supplier. 25.3 If The Supplier Suffers Loss In Its Initial Performance Of The Terminated Contract, Such As Purchase Of Raw Materials For Goods Specially Manufactured For The Procuring Entity Which Cannot Be Sold In Open Market, It Shall Be Allowed To Recover Partially From This Contract, On A Quantum Meruit Basis. Before Recovery May Be Made, The Fact Of Loss Must Be Established Under Oath By The Supplier To The Satisfaction Of The Procuring Entity Before Recovery May Be Made. 26. Termination For Unlawful Acts 26.1 The Procuring Entity May Terminate This Contract In Case It Is Determined Prima Facie That The Supplier Has Engaged, Before Or During The Implementation Of This Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation. Unlawful Acts Include, But Are Not Limited To, The Following: (a) Corrupt, Fraudulent, And Coercive Practices As Defined In Itb Clause 3.1(a); (b) Drawing Up Or Using Forged Documents; (c) Using Adulterated Materials, Means Or Methods, Or Engaging In Production Contrary To Rules Of Science Or The Trade; And (d) Any Other Act Analogous To The Foregoing. 27. Procedures For Termination Of Contracts 27.1 The Following Provisions Shall Govern The Procedures For Termination Of This Contract: (a) Upon Receipt Of A Written Report Of Acts Or Causes Which May Constitute Ground(s) For Termination As Aforementioned, Or Upon Its Own Initiative, The Implementing Unit Shall, Within A Period Of Seven (7) Calendar Days, Verify The Existence Of Such Ground(s) And Cause The Execution Of A Verified Report, With All Relevant Evidence Attached; (b) Upon Recommendation By The Implementing Unit, The Head Of The Procuring Entity Shall Terminate This Contract Only By A Written Notice To The Supplier Conveying The Termination Of This Contract. The Notice Shall State: (i) That This Contract Is Being Terminated For Any Of The Ground(s) Afore-mentioned, And A Statement Of The Acts That Constitute The Ground(s) Constituting The Same; (ii) The Extent Of Termination, Whether In Whole Or In Part; (iii) An Instruction To The Supplier To Show Cause As To Why This Contract Should Not Be Terminated; (iv) Special Instructions Of The Procuring Entity, If Any. (c) The Notice To Terminate Shall Be Accompanied By A Copy Of The Verified Report; (d) Within A Period Of Seven (7) Calendar Days From Receipt Of The Notice Of Termination, The Supplier Shall Submit To The Head Of The Procuring Entity A Verified Position Paper Stating Why This Contract Should Not Be Terminated. If The Supplier Fails To Show Cause After The Lapse Of The Seven (7) Day Period, Either By Inaction Or By Default, The Head Of The Procuring Entity Shall Issue An Order Terminating This Contract; (e) The Procuring Entity May, At Anytime Before Receipt Of The Supplier’s Verified Position Paper To Withdraw The Notice To Terminate If It Is Determined That Certain Items Or Works Subject Of The Notice Had Been Completed, Delivered, Or Performed Before The Supplier’s Receipt Of The Notice; (f) Within A Non-extendible Period Of Ten (10) Calendar Days From Receipt Of The Verified Position Paper, The Head Of The Procuring Entity Shall Decide Whether Or Not To Terminate This Contract. It Shall Serve A Written Notice To The Supplier Of Its Decision And, Unless Otherwise Provided, This Contract Is Deemed Terminated From Receipt Of The Supplier Of The Notice Of Decision. The Termination Shall Only Be Based On The Ground(s) Stated In The Notice To Terminate; (g) The Head Of The Procuring Entity May Create A Contract Termination Review Committee (ctrc) To Assist Him In The Discharge Of This Function. All Decisions Recommended By The Ctrc Shall Be Subject To The Approval Of The Head Of The Procuring Entity; And (h) The Supplier Must Serve A Written Notice To The Procuring Entity Of Its Intention To Terminate The Contract At Least Thirty (30) Calendar Days Before Its Intended Termination. The Contract Is Deemed Terminated If It Is Not Resumed In Thirty (30) Calendar Days After The Receipt Of Such Notice By The Procuring Entity. 28. Assignment Of Rights The Supplier Shall Not Assign His Rights Or Obligations Under This Contract, In Whole Or In Part, Except With The Procuring Entity’s Prior Written Consent. 29. Contract Amendment Subject To Applicable Laws, No Variation In Or Modification Of The Terms Of This Contract Shall Be Made Except By Written Amendment Signed By The Parties. 30. Application These General Conditions Shall Apply To The Extent That They Are Not Superseded By Provisions Of Other Parts Of This Contract. Section V – Special Conditions Of Contract Scc Clause 1.1(g) The Procuring Entity Is The Local Government Of Badiangan, Iloilo. 1.1(i) The Supplier Is ________________________________. 1.1(j) The Funding Source Is Through The General Fund Of The Local Government Of Badiangan, Iloilo. The Total Approved Budget For The Contract Is One Million Eight Hundred Thousand Pesos Only (p 1,800,000.00) 1.1(k) The Project Site Or The Delivery Of The Goods Shall Be At The Municipal Hall, Badiangan, Iloilo. 5.1 The Procuring Entity’s Address For Notices Is: Atty. Suzette A. Mamon Municipal Mayor Badiangan Municipal Hall R.c. Tabiana St., Poblacion, Badiangan, Iloilo 5033 Tel. No: Mayor’s Office (033-320-0807) 6.2 The Additional Requirements For The Completion Of This Contract Are As Follows: Delivery And Documents - For Purposes Of The Contract(s), “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of The Contract(s) Shall Be As Follows: For Domestic Suppliers, “the Delivery Terms Applicable To This Contract Are Delivered To The Municipal Hall, Badiangan, Iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi – Schedule Of Requirements. The Details Of Shipping And/or Other Documents To Be Furnished By The Supplier Are As Follows: Upon Delivery Of Goods To The Project Site, The Supplier Shall Notify The Procuring Entity And Present The Following Documents To The Procuring Entity: (i) Original And Four Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; (ii) Original And Four Copies Delivery Receipt/note, Railway Receipt Or Truck Receipt; (iii) Original Supplier’s Factory Inspection Report; (iv) Original And Four Copies Of The Manufacturer’s And/or Supplier’s Warranty Certificate; (v) Original And Four Copies Of The Certificate Of Origin (for Imported Goods); (vi) Delivery Receipt Detailing Number And Description Of Items Received Signed By The Authorized Receiving Personnel; (vii) Certificate Of Acceptance/inspection Report Signed By The Procuring Entity’s Representative At The Project Site; And (viii) Four Copies Of The Invoice Receipt For Property Signed By The Procuring Entity’s Representative At The Project Site. For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Mrs. Meriam S. Constantinopla, Mayor’s Office Representative, Municipal Hall, Badiangan, Iloilo. Incidental Services - The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi – Schedule Of Requirements. (a) Performance Or Supervision Of On-site Assembly And/or Start Up Of The Supplied Goods; (b) Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; (c) Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; (d) Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And (e) Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Insurance – The Goods Supplied Under This Contract Shall Be Fully Insured By The Supplier In A Freely Convertible Currency Against Loss Or Damage Incidental To Manufacture Or Acquisition, Transportation, Storage, And Delivery. The Goods Remain At The Risk And Title Of The Supplier Until Their Final Acceptance By The Procuring Entity. Transportation - Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure In Accordance With Gcc Clause 22. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Patent Rights - The Supplier Shall Indemnify The Procuring Entity Against All Third Party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 9 Bid Prices Are Considered Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances And Upon Prior Approval Of The Gppb In Accordance With Section 61 Of R.a. 9184 And Its Irr-a. 10.1 No Further Instructions. 10.4 No Further Instructions. 13.1 No Further Instructions. 13.4 No Further Instructions. 13.4 (c) No Further Instructions. 16.1 The Inspection And Test That Will Be Conducted Is Physical Inspection. 17.3 The Goods Shall Have A Warranty Period Of One (1) Year After Acceptance By The Procuring Entity Of The Delivered Goods Or After The Goods Are Consumed Whichever Is Earlier. 17.4 & 17.5 The Period For Correction Of Defects In The Warranty Period Is Seven (7) Calendar Days From Either Verbal Or Written Notification. 19 The Applicable Rate Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, The Procuring Entity Shall Rescind The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. 20.4 In The Case Of A Dispute Between The Procuring Entity And The Supplier, The Dispute Shall Be Resolved In Accordance With Republic Act 9285 (“r.a. 9285”), Otherwise Known As The “alternative Dispute Resolution Act Of 2004.” 21.1 No Additional Provisions. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Days/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site Item No. Description Quantity Total Delivered, Days/months 1. Utility Van (uv) Technical Specifications: Engine Type: 4-cylinder, In-line, 16-valve, Dohc, With Vvt Gasoline Fed And Euro 4 Compliant Displacement: (1,460 – 1660cc) Max Power: 94 Hp (minimum) Max Torque: 130 N-m (minimum) Transmission Type: 5 Speed Manual Transmission Or Better Under Chassis Drive Train: 2wd Suspension: Coil Spring (front) / Leaf Spring (rear) Wheel Brakes: Ventilated Disc (front)/ Leading And Trailing Drum (rear) Wheels: R13 Steel Rims (front/rear) Or Better Steering: Rack And Pinion With Electric Power Steering Or Better Overall Dimension Overall Length (mm): 4340 (minimum) Overall Width (mm): 1760 (minimum) Overall Height (mm): 2030 (minimum) Ground Clearance (mm): 160 (minimum) Fuel Capacity Fuel Tank Capacity: 42 Liters (minimum) Accessories: With Cabin Airconditioning System Body Color: White Registration: 3 Years Lto Registration With 1 Year Gsis Comprehensive Insurance Insurance Warranty: 100,000km. Or Three (3) Years Whichever Comes First With Free Periodic/ Preventive Maintenance Service For Three Years Or 45,000km Whichever Comes First Additional: Medium Black Tint, Decals “badiangan Logo” 2 Units 2 Units 30 Calendar Days Upon Receipt Of P.o. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ Date: ____________________________________ Section Vii. Technical Specifications Note: In The Statement Of Compliance Column, Bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Goods Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidders Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Provisions Of Itb Clause 3.1(a)(ii) And/or Gcc Clause 2.1(a)(ii). Item No. Specifications Statement Of Compliance Cross Reference 1. Utility Van (uv) Technical Specifications: Engine Type: 4-cylinder, In-line, 16 - Valve Dohc, With Vvt Gasoline Fed And Euro 4 Compliant Displacement: (1,460 – 1660cc) Max Power: 94 Hp (minimum) Max Torque: 130 N-m (minimum) Transmission Type: 5 Speed Manual Transmission Or Better Under Chassis Drive Train: 2wd Suspension: Coil Spring (front) Leaf Spring (rear) Wheel Brakes: Ventilated Disc (front) / Leading And Trailing Drum (rear) Wheels: R13 Steel Rims (front/rear) Or Better Steering: Rack And Pinion With Electric Power Steering Or Better Overall Dimension Overall Length (mm): 4340 (minimum) Overall Width (mm): 1760 (minimum) Overall Height (mm): 2030 (minimum) Ground Clearance (mm): 160 (minimum) Fuel Capacity Fuel Tank Capacity: 42 Liters (minimum) Accessories: With Cabin Airconditioning System Body Color: White Registration: 3 Years Lto Registration With 1 Year Gsis Comprehensive Insurance Insurance Warranty: 100,000km. Or Three (3) Years Whichever Comes First With Free Periodic/ Preventive Maintenance Service For Three Years Or 45,000km Whichever Comes First Additional: Medium Black Tint, Decals “badiangan Logo” Note: Brochure Pertaining To The Model / Variant To Be Delivered Shall Also Be Submitted With This Form. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ Date: ____________________________________ Section Viii. Bidding Forms Bid Form Date: Project Identification No.: To: [name And Address Of Procuring Entity] Gentlemen And/or Ladies: Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To [supply/deliver/perform] [description Of The Goods] In Conformity With The Said Pbds For The Sum Of [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein Or In The Price Schedules. We Undertake, If Our Bid Is Accepted, To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements. If Our Bid Is Accepted, We Undertake To Provide A Performance Security In The Form, Amounts, And Within The Times Specified In The Bidding Documents. We Agree To Abide By This Bid For The Bid Validity Period Specified In Bds Provision For Itb Clause 18.2 And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period. Commissions Or Gratuities, If Any, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Of Agent Amount And Currency Purpose Of Commission Or Gratuity (if None, State “none”) Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid, Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements As Per Itb Clause 5 Of The Bidding Documents. We Likewise Certify/ Confirm That The Undersigned, [ For Sole Proprietorships, Insert: As The Owner And Sole Proprietor Or Authorized Representative Of Name Of Bidder, Has The Full Power And Authority To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract, On The Latter's Behalf For The [name Of Project] Of The [name Of Procuring Entity] [for Partnerships, Corporations, Cooperatives, Or Joint Ventures, Insert: Is Granted Full Power And Authority By The Name Of Bidder, To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract On The Latter's Behalf For [name Of Project] Of The [name Of The Procuring Entity]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Dated This ________________ Day Of ________________ 20______. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ Date: ____________________________________ For Goods Offered From Within The Philippines Name Of Bidder ____________________________ Project Identification No. __. Page Of . All Entries Must Be Computerized Or Typewritten 1 2 3 4 5 6 7 8 9 10 Item No. Description Country Of Origin Quantity Unit Unit Price Exw Per Item Transportation And Insurance And All Other Costs Incidental To Delivery, Per Item Sales And Other Taxes Payable If Contract Is Awarded, Per Item Cost Of Incidental Services, If Applicable, Per Item Total Price Per Unit (col 5 + 6 + 7 + 8) Total Price Delivered Final Destination (col. 9) X (col. 4) 1. Utility Van (uv) Technical Specifications: Engine Type: 4-cylinder, In-line, 16-valve Dohc, With Vvt Gasoline Fed And Euro 4 Compliant Displacement: (1,460 – 1,660cc) Max Power: 94 Hp (minimum) Max Torque: 130 N-m (minimum) Transmission Type: 5 Speed Manual Transmission Or Better Under Chassis Drive Train: 2wd Suspension: Coil Spring (front) / Leaf Spring (rear) Wheel Brakes: Ventilated Disc (front)/ Leading And Trailing Drum (rear) Wheels: R13 Steel Rims (front/rear) Or Better Steering: Rack And Pinion With Electric Power Steering Or Better Overall Dimension Overall Length (mm): 4340 (minimum) Overall Width (mm): 1760 (minimum) Overall Height (mm): 2030 (minimum) Ground Clearance (mm): 160 (minimum) Fuel Capacity Fuel Tank Capacity: 42 Liters (minimum) Accessories: With Cabin Airconditioning System Body Color: White Registration: 3 Years Lto Registration With 1 Year Gsis Comprehensive Insurance Insurance Warranty: 100,000km. Or Three (3) Years Whichever Comes First With Free Periodic/ Preventive Maintenance Service For Three Years Or 45,000km Whichever Comes First Additional: Medium Black Tint, Decals “badiangan Logo” 2 Units Note: Brochure Pertaining To The Model / Variant To Be Delivered Shall Also Be Submitted With This Form. Name: ____________________________________________________________ Legal Capacity: _____________________________________________________ Signature: _________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___________________________ Omnibus Sworn Statement Republic Of The Philippines ) Iloilocity ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Represent It In The Bidding For [name Of The Project] Of The [name Of The Procuring Entity]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary And/or To Represent The [name Of Bidder] In The Bidding As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate Issued By The Corporation Or The Members Of The Joint Venture)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: I Am Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S, 1930, As Amended, Or The Revised Penal Code, In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ___________________________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [jurat] Checklist Of Bid Requirements First Envelope Eligibility Documents Class “a” Documents Legal Documents: 1 Certificate Of Philgeps Registration (platinum Membership) And Membership With Annex A In Accordance With Section 8.5.2 Of The Revised Irr. Technical Documents: 2 Statement Of All Its On-going Government And Private Contracts Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, Including Contracts Awarded But Not Yet Started, If Any, Which Are Similar In Nature And Complexity To The Contract To Be Bid. The Statement Shall Include, For Each Contract, The Following: (a) Name Of The Contract; (b) Date Of The Contract, (c) Kind Of Goods, (d) Amount Of And Value Of Outstanding Contracts, (e) Date Of Delivery, And (f) Notice Of Award, Notice To Proceed, Contract Of Agreements, Purchase Orders And Certificate Of Accomplishments Issued By The Owner. (latest) 3 Statement Of Its Single Largest Completed Contract (slcc) Which Includes Its Government And Private Contracts Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, Which Are Similar In Nature And Complexity To The Contract To Be Bid. The Statement Shall Include, For Each Contract, The Following: (a) Name Of The Contract; (b) Date Of The Contract, (c) Kind Of Goods, (d) Amount Of And Value Of Awarded And Completed Contracts, (e) Date Of Delivery, (f) End User’s Acceptance And Or Official Receipt(s) Issued For The Contract Supported By Notice Of Award, Notice To Proceed, Contract/ Purchase Order, Certificate Of Completion And Certificate Of Acceptance.(latest) Financial Documents 4 The Prospective Bidder’s Latest Computation For Its Net Financial Contracting Capacity (nfcc) Which Must Be At Least Equal To The Abc To Be Bid. (latest) Or A Committed Line Of Credit From Universal Or Commercial Bank (not Applicable To Procurement Of Infrastructure Projects). Class “b” Documents 5 If Applicable, A Valid Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence, Or, In Lieu Thereof, A Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful Shall Be Included In The Bid . (latest) Technical Documents 1 2 Bid Security In The Prescribed Form, Amount And Validity Period And In Accordance With Itb Clause 18. Statement Of Compliance To The Schedule Of Requirements 3 4 Statement Of Compliance To Technical Specifications Taking Into Consideration The Notations Stated In Section Vii Of The Bidding Documents. Authority Of The Signatory 5 Sworn Statement By The Prospective Bidder Or Its Duly Authorized Representative In Accordance With Section 25.2(b)(iv) Of The Revised Irr Of Ra 9184 And As Indicated In The Omnibus Sworn Statement Of The Bidding Documents Using The Prescribed Form Issued By The Gppb. (latest) Note: Any Missing Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid Second Envelope Financial Documents 1 Financial Bid Form Which Includes Bid Prices And The Bill Of Quantities And The Applicable Price Schedules, In Accordance With Itb Clauses 15.1 And 15.4 And The Issued Form In Section Viii Of The Bidding Documents. 2 If A Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti (if A Bidder Is A Sole Proprietor), By Sec (if Bidder Is A Partnership, Or A Corporation); And Cda (if Bidder Is A Cooperative)issued In Accordance With Itb Clause 27, If Applicable, That: A) Sole Proprietor Is A Citizen Of The Philippines, Corporation, Cooperative, Or Association Is A Duly Organized Under The Laws Of The Philippines With At Least Seventy Five (75%) Of Its Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines; B) Habitually Established In Business And Habitually Engaged In The Manufacturing Or Sale Of The Merchandise Covered By His Bid, And C) The Business Has Been In Existence For At Least Five (5) Consecutive Years Prior To The Advertisement And/or The Invitation To Bid.

Details: Measure Federal program "Renovation of municipal facilities in the areas of sport, youth and culture" Heinrichslust sports complex in 16303 Schwedt/oder, Am Sportplatz 12 A 4. Ba, renovation of main field including ancillary facilities and path connections Sports field construction (production of synthetic running track), landscaping, electrical system construction, well construction, paving work 1,080 m curbs, grandstand steps, removal and disposal 1,150 m concrete edge stones, removal and disposal 790 m² concrete paving stone removal, temporary storage and reinstallation 6 trees felling, woody plants clearing 3,000 t soil removal and disposal 770 t threshing floor covering Rc-1 removal and disposal 850 t slag base layer Avv 170106* removal and disposal 6,380 m² turf removal 1,350 m cable trenches creation 75 m Install root protection membrane 400 m Install sports slotted channels 80 m Install drainage channels 370 m Lay kg-pipe 190 m Produce pipe trenches 13 pieces Install inspection and cleaning shafts 15,500 m2 Produce earth subgrade 560 m³ Supply and install topsoil 780 m Install concrete curbs 1,635 m² Produce concrete paving surface 280 m² Produce water-bound road surface 565 m Produce running track edging 4,394 m² Install two-layer gravel base layer 4,394 m² Install asphalt base layer for synthetic sports surface 4,394 m² Install synthetic sports surface 180 m Produce aluminum barrier 1 piece Produce deep well with submersible motor pumps 1 piece Produce fully automatic irrigation system Supply sports field equipment: 2 pieces soccer goals Beach volleyball facility Long jump facility with sand traps and take-off boards Shot put facility 4 starting machines 1 transport cart for starting machines 1 high jump facility with cover 1 basketball facility 1 volleyball facility Install 23 m wire mesh fence, height 1.8 m Install 2 goals Lay 310 m water supply pipe Install 4 extraction valve sets Plant and maintain 23 trees Create and maintain 715 m² shrub planting Create and maintain 4,200 m² lawn seeding Create and maintain 2,200 m² sports turf

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Bids And Awards Committee Ooooooo ----------------------------------------------------------------------------------------------------------------------------- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Invitation To Bid Ib No. 2024-11-28 (91) Supply And Delivery Of Various Medical Grade Equipment And Instrument Back Table For Ambulatory Use – Rebid Abc: ₱ 1,300,000.00 ===================================================================== 1. The Caraga Regional Hospital (crh), Through The General Appropriation Act (gaa), Hfep - Saa No. 2024-02-0271 Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of One Million Three Hundred Thousand Pesos Only (php 1,300,000.00) Under The Contract For The Supply And Delivery Of Various Medical Grade Equipment And Instrument Back Table For Ambulatory Use – Rebid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding, To Wit: Item No. Description Qty Unit Of Measure Unit Cost Total Cost 1 Vacuum Cleaner, Heavy Duty With Hepa Filter Bags 2 Set ₱150,000.00 ₱ 300,000.00 2 Surgical Emergency Medecine Crash Cart W/ Power Outlet Extension Wire And Cardiac Board 1 Set ₱100,000.00 ₱ 100,000.00 3 Patient Normothermia Warming Blanket Device 4 Unit ₱50,000.00 ₱ 200,000.00 4 Core Needle Biopsy Gun, Reusable With Autoclavable Needle Set 2 Unit ₱100,000.00 ₱ 200,000.00 5 Cast Cutter, Orthopedic, Electric, Medical Grade 2 Set ₱200,000.00 ₱ 400,000.00 6 Instrument Back Table With Pedal Operated Wheels And Hydraulic Height Adjustment 2 Unit 50,000.00 100,000.00 Grand Total ₱ 1,300,000.00 This Is A Partial Bid Or Line Item Bid 1 Vacuum Cleaner, Heavy Duty With Hepa Filter Bags Description A Vacuum Cleaner With A Hepa Filtration System For More Effective Indoor Cleaning And Disinfection. This Machine Can Minimize Indoor Air Pollution And Mitigate Exposure To Allergic Triggers. Purpose Of Use Ambulatory Surgery Unit Technical Specification Dust Capacity: 2.5l Hose Length: Not More Than 1.5m Washable And Filters Preferably Autoclavable Quick Dust Release One Touch Automatic Cord Rewind Extension Cord Of 5 Meters To 10 Meters Long Power Cord To Avoid Changing Power Points Every 5 Meters. Power: 1000w Suction Power: 130w Voltage: 100vac-240vac 60hz Waterproof Motor Additional Reusable Filter Bags Preferably Autoclavable Physical / Chemical Characteristics Consider A Vacuum Cleaner That Is: Light Weight Quiet Operation Easy To Use Over Floors, Walls, Ceiling And Hard Surfaces And Has A Compact Design For Easy Storage And Maneuverability Environmental Factors Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg Celsius And Relative Humidity Of 15 To 90%. Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg Celsius And Relative Humidity Of 15 To 90% Accessories, Consumables, Spare Parts, Other Components · Brush Tool · Hose Not More Than 1.5m · Filter (preferably Autoclavable) · Hose Connector · Compressed Brush · Extending Plastic Tube At Least 5 Pieces Extra Hepa Filters (autoclavable) Technical Services System Warranty Must Be Five (5) Years Service Call Within 24 Hours Maximum. Preventive Maintenance For Every Quarter Until Warranty Expires. Service Kits And Consumables To Be Included For One Year Use. Supplier Must Deliver And Install The Unit Without Cost To The Owner Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Training / Installation / Utilization Pre- Installation Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirement For Commissioning Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate Training Of Users Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Safety And Standards En 1041: Information Supplied By The Manufacturer With Medical Devices En 60601-1: Medical Electrical Equipment Part 1: General Requirements For Safety (iec: 60601-1:1998) En 60601-1-2: Medical Electrical Equipment Part 1-2: General Requirements For Safety - Collateral Standard: Electromagnetic Compatibility - Requirements And Test (iec 60601-1-2:2001) Warranty And Maintenance 5 Years Warranty Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Serial Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Delivery Period 45 Calendar Days From Receipt Of The Notice To Proceed Mode Of Payment Upon Full Delivery, Installed, Tested And Commissioned Post-qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Other Terms And Condition Of Acceptability: Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. 2 Surgical Emergency Medicine Crash Cart W/ Power Outlet Extension Wire And Cardiac Board Description Surgical Emergency Medicine Crash Cart Is Used To Transport And Dispense Emergency Medications And Supplies. It Is Essential For Cardiopulmonary Resuscitation As It Contains Advanced Cardiac Life Support (acls) First-line Drugs, A Defibrillator, A Bag Valve Mask, A Suction Device And Emergency Supplies. Purpose Of Use Ambulatory Surgery Unit Technical Specification Portable Stainless Steel Trolley Body Stainless Columns Rust Proof Iv Poles (2 Pcs) Dust Basket Utility Container Waterproof File Bag At The Side Defibrillator And Cardiac Monitor Shelf Power Outlet, Extension Wire & Hook Sliding Side Shelf Stainless Steel Guard Rail Stainless Steel Waste Bins Centralized Lock Two (2) Small And Four (4) Big Drawers Total Of 6 Level Division Drawers Adjustable Partitions For Organization At The Inner Portion Of Each Drawer Drawers Can Be Repositioned Easily 4pcs 125mm Casters, Two With Brake And Lock System Cpr Or Cardiac Board Oxygen Tank Holder Catheter Holders Sharps Containers Physical / Chemical Characteristics Surgical Emergency Medicine Crash Cart Is Made Of High-strength Stainless Material, Making It Sturdy And Durable. The One-piece Stainless Top Board Has An Arching Handle And Raised-edge Design, Covered With Rust Proof Stainless Steel. It Comes With Four Rust Proof Stainless Steel Columns For Added Stability. Ideal For Emergency Situations During A Surgical Operation As It Is Easy To Maneuver And Can Transport A Variety Of Medical Supplies And Medications. Environmental Factors - Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg Celsius And Relative Humidity Of 15 To 100%. Accessories, Consumables, Spare Parts, Other Components Emergency Crash Cart Accessory Package: 2 Pcs Stainless Steel Iv-pole With 4 Durable Hangers, Cardiac Board, Side Shelf, Heavy Duty Railings, Oxygen Tank Brackets, 3 Inches X 4 Inches Tray W/ Dividers, 5 Inches X 2 Inches Tray W/ Dividers, Waterproof Label Holders And Utility Hooks, And Emergency Led Flashlight Technical Services System Warranty Must Be Five (5) Years Service Call Within 24 Hours Maximum. Preventive Maintenance For Every Quarter Until Warranty Expires. Service Kits And Consumables To Be Included For One Year Use. Supplier Must Deliver And Install The Unit Without Cost To The Owner Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Training / Installation / Utilization Pre- Installation Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirement For Commissioning Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate Training Of Users Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Safety And Standards Iso 13485, Fda, Ce. Iso 14971:2007 Medical Devices -- Application Of Risk Management To Medical Devices Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Warranty And Maintenance 5 Years Warranty Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Delivery Period 45 Calendar Days From Receipt Of The Notice To Proceed Mode Of Payment Upon Full Delivery, Installed, Tested And Commissioned Post-qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Other Terms And Condition Of Acceptability: Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. 3 Patient Normothermia Warming Blanket Device Description A Device That Helps Control The Patient’s Temperature. Has Two Separate Heating And Cooling Reservoirs To Help Deliver Either A Heated Solution Or Cooled Solution To The Patient When Needed. The Desired Temperature Water Is Circulated Through Tubing In A Blanket. The System Is Continuously Checking The Temperature Of The Water Against The Temperature Of The Patient To Achieve The Desired Correct Temperature. A Manual Mode And An Automatic Mode With A Microprocessor That Creates A More Precise And Accurate Reading. Actively Warming Patients That Have Hypothermic Symptoms. Dual Reservoir For Warming And Cooling System. Maintaining Normothermia Throughout The Perioperative And Postoperative Periods Help Safeguard Patients From The Potential Of Dangerous Complications. The Normothermia Blanket System Provides A Comprehensive Solution That Works Seamlessly Throughout The Perioperative Process To Effectively And Efficiently Measure And Manage Patient Temperature. Clinical Research About Patient Warming Shows That Consistently Maintaining A Patient’s Core Body Temperature Before, During And After Surgery With The Temperature Management System Helps Reduce The Risk Of Surgical Site Infections By Maintaining Normothermia. Purpose Of Use Ambulatory Surgery Unit Technical Specification Temperature Control: Blanket Range: 39.2 To 107.6 °f (4 To 42°c) Patient Range: 86 To 105.8 °f (30 To 41°c) Heating Rate: 3.2 °f/ Min ( 1.8°c/min) Cooling Rate: 3.4 °f/min (1.9°c/min) Control: Microprocessor Self-compensating Temperature Measurement No Periodic Calibration Required Fluid System Distilled Water: 2.5 Gallons Separated Hot And Cold Reservoirs Magnetically Coupled Pump 16gph Flow Rate Minimum Within The Blanket Refrigerant: R-134a (freon Free) Power: Volts: 100vac-240vac 60hz 500 Watts Heater 1/3 Hp Refrigeration System Physical / Chemical Characteristics The Blanket Is X-ray Compatible. It Is Also Latex Free To Reduce Allergy Risks And Is Recyclable And Can Be Easily Wiped Down With Approved Disinfectants. Patient Warming Blankets Are An Ideal Choice For A Variety Of Normothermic Procedures, As They Are Lightweight, Convenient To Carry And Easily Transportable. The Blanket Can Still Maintain Performance After Cuts Or Spills, And Its Small-profile Cable Can Be Secured Easily With Its Integrated Linen Clip To Reduce Tripping Hazard Risk. Environmental Factors - Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg Celsius And Relative Humidity Of 15 To 100%. Accessories, Consumables, Spare Parts, Other Components 1 Safety Storage Box Flexible, Versatile Flexible Blanket Overlays, Covered On Both Sides In A Soft, Lightweight Material That’s Comfortable Against A Patient’s Skin. Tamper-proof Or Tear-proof Material. Integrated Rechargeable Battery With Two Hours Of Continuous Use To Allow Warming To Continue Uninterrupted During Transport And Power Shortage. The Soft-touch Controller Unit And Universally Pole-mountable, Features Adjustable Temperature Settings And A Large Temperature Display, And Can Independently Manage Two Blankets Simultaneously To Maximize Skin Coverage. Self-sealing Connecting Hoses Linen Clip Or Securing Clips Refrigerant: R-134a (freon Free) Technical Services System Warranty Must Be Five (5) Years Service Call Within 24 Hours Maximum. Preventive Maintenance For Every Quarter Until Warranty Expires. Service Kits And Consumables To Be Included For One Year Use. Supplier Must Deliver And Install The Unit Without Cost To The Owner Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Training / Installation / Utilization Pre- Installation Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirement For Commissioning Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate Training Of Users Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Safety And Standards Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Iec 60601-1-1:2000 Medical Electrical Equipment - Part 1-1: General Requirements For Safety - Collateral Standard: Safety Requirements For Medical Electrical Systems En 12470-5: European Standard For Clinical Thermometer Performance, En 1041: Information Supplied By The Manufacturer With Medical Devices Warranty And Maintenance 5 Years Warranty Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Delivery Period 45 Calendar Days From Receipt Of The Notice To Proceed Mode Of Payment Upon Full Delivery, Installed, Tested And Commissioned Post-qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Other Terms And Condition Of Acceptability: Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. 4 Core Needle Biopsy Gun, Reusable With Autoclavable Needle Set Description A Set Of Hand-held Reusable Biopsy Device Used To Obtain Adequate Tissue Samples From Patients With Tumors, Masses Or Areas Of Concern. It Can Be Used To Do Biopsy In Various Organs And Masses In The Breast, Extremities, Liver, Kidney, Prostate, Among Others. These Tissue Samples Are Then Sent For Pathological Examination. It Is Intended For Multiple Use, And Fires Both A Central Stylet And Cutting Sheath In A Rapid Forward Motion Such That The Tissue Core Is Obtained At A Preset Distance Ahead Of The Visualized Needle Tip. Purpose Of Use Ambulatory Surgery Unit Technical Specification ● Reusable Core Needle Biopsy Gun ● Dual Spring System - For High Speed And Consistent Sampling ● Lightweight And Made Of Aluminum ● One-hand Activation For Single Person Operation And Easy Access To Tissue Sample ● Compatible With Needles In Various Lengths And Sizes. ● Dual Penetration Depths (15mm To 22mm) For Flexibility And Accuracy ● Etched Needle Tips For Better Visualization Of Needle Placement Under Ultrasound Guidance ● Color-coded Hubs For Easier Identification Of Size Of Needles Measurement Length: 12-15cm X 20-25cm Weight: <250g Physical / Chemical Characteristics Components: Instrument To Be Placed In A Sturdy Case That Is Portable And Well-cushioned To Avoid Damage During Transport. Mobility And Portability: Portable, Mobile And Easy To Carry Case Containing The Instrument. Environmental Factors Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50°celsius And Relative Humidity Of 15 To 90%. Capable Of Operating Continuously In Ambient Temperature Of 10 To 40°celsius And Relative Humidity Of 15 To 90%. Accessories, Consumables, Spare Parts, Other Components ● Case For The Device For Storage ● Biopsy Autoclavable Needles Compatible To The Instrument: ○ 10 Pcs - Gauge 18, Length 10cm ○ 10pcs - Gauge 18, Length 20cm ○ 20 Pcs - Gauge 14, Length 10cm Technical Services System Warranty Must Be Five (5) Years Service Call Within 24 Hours Maximum. Preventive Maintenance For Every Quarter Until Warranty Expires. Service Kits And Consumables To Be Included For One Year Use. Supplier Must Deliver And Install The Unit Without Cost To The Owner Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Training / Installation / Utilization Pre- Installation Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirement For Commissioning Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate Training Of Users Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Safety And Standards Certified In At Least One Of The Following: Iso 13485:2003 Medical Devices -- Quality Management Systems -- Requirements For Regulatory Purposes (australia, Canada And Eu) Iso 14971:2007 Medical Devices -- Application Of Risk Management To Medical Devices Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Iec 60601-1-1:2000 Medical Electrical Equipment - Part 1-1: General Requirements For Safety - Collateral Standard: Safety Requirements For Medical Electrical Systems Iec 60601-1-2:2007 Medical Electrical Equipment - Part 1-2: General Requirements For Basic Safety And Essential Performance - Collateral Standard: Electromagnetic Compatibility - Requirements And Tests Iec 60601-2-37:2007 Medical Electrical Equipment - Part 2-37: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Medical Diagnostic And Monitoring Equipment Iec 61391-1:2006 Ultrasonics - Pulse-echo Scanners - Part 1: Techniques For Calibrating Spatial Measurement Systems And Measurement Of System Point-spread Function Response Iec 61391-2:2010 Ultrasonics - Pulse-echo Scanners - Part 2: Measurement Of Maximum Depth Of Penetration And Local Dynamic Range Iec 62359 :2010 Ultrasonics - Field Characterization - Test Methods For The Determination Of Thermal And Mechanical Indices Related To Medical Diagnostic Ultrasonic Fields Warranty And Maintenance 5 Years Warranty Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Delivery Period 45calendar Days From Receipt Of The Notice To Proceed Mode Of Payment Upon Full Delivery, Installed, Tested And Commissioned Post-qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Other Terms And Condition Of Acceptability: Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. 5 Cast Cutter, Orthopedic, Electric, Medical Grade Description Orthopedic Electric Cast Cutter Is A Medical Grade Cutter Designed For Light Weight, Low Noise, And Low Vibration System. It's Ergonomic Design Allows For Extended Use Offering Reduction In Heat And Hand Fatigue. It Offers Increased Maneuverability Due To Their Decreased Grip Size And Lack Of Obtrusive Cabling. The Facility Requires An Integrated Vacuum System With Reference Standard In Medical Grade Cast Removal Systems. Purpose Of Use Ambulatory Surgery Unit Technical Features · Mechanical Elements Mounted On Rubber Bushings Help Minimize Noise And Vibration · Scaled Components Reduce Handset Weight · No Tools Required Enabling Quick Blade And Accessory Changes · 100 Vac Low Voltage At The Handset · With Integrated Vacuum System And Additional Cutter Blades For Replacements Placed In A Sturdy Case Or Box Technical Vacuum Specification · Vacuum Power: Adjustable From 300-1000 Watts · Vacuum Noise Level: 60-70 Db · Suction: 5.21 In Hg; 84 Cfm · Vacuum Hose Length: Not Less Than 10 Inches · Vacuum Tank Capacity: 5 Gallons · Vacuum/acc. Weight: Not More Than 40 Lbs. · Handset Weight: Not More Than 1.70 Lbs. Technical Saw Specification Standard Speed Supply Frequency: 50-60hz, 120w Power Supply Input 220v / 230v,ac Only Physical / Chemical Characteristics Secured Against Fluid Ingress Machine Cover Should Be Openable For Repair And Maintenance Oil-free Pump Operation Preferred Environmental Factors - Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg Celsius And Relative Humidity Of 15 To 100%. - Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg Celsius And Relative Humidity Of 15 To 100%. Accessories, Consumables, Spare Parts, Other Components 12 Pcs 50mm Dia. Titanium Cast Saw Blade 12 Pcs 44mm Dia. Titanium Cast Saw Blade 12 Pcs 64mm Dia. Titanium Cast Saw Blade 2 Pcs Extraction Hood 12 Pcs Dust Bag Preferably Autoclavable 2 Pcs Cast Saw Wall Bracket Orthopedic Cast Cutter Blades, Compatible With Electric Orthopedic Cast Cutter, Tungsten Carbide Coated Heavy Duty Technical Services System Warranty Must Be Five (5) Years Service Call Within 24 Hours Maximum. Preventive Maintenance For Every Quarter Until Warranty Expires. Service Kits And Consumables To Be Included For One Year Use. Supplier Must Deliver And Install The Unit Without Cost To The Owner Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Training / Installation / Utilization Pre- Installation Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirement For Commissioning Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate Training Of Users Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Safety And Standards Iso 13485, Fda, Ce. Iso 13485:2003 Medical Devices -- Quality Management Systems -- Requirements For Regulatory Purposes (australia, Canada And Eu) Iso 14971:2007 Medical Devices -- Application Of Risk Management To Medical Devices Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Iec 60601-1-1:2000 Medical Electrical Equipment - Part 1-1: General Requirements For Safety - Collateral Standard: Safety Requirements For Medical Electrical Systems Warranty And Maintenance 5 Years Warranty Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Delivery Period 45calendar Days From Receipt Of The Notice To Proceed Mode Of Payment Upon Full Delivery, Installed, Tested And Commissioned Post-qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Other Terms And Condition Of Acceptability: Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. 6. Instrument Back Table With Pedal Operated Wheels And Hydraulic Height Adjustment Description Instrument Back Table Are Portable Instrument Stands With A Tray On Top Used To Hold Surgical Instruments And Materials During Operating Room And In-office Procedures. Instrument Back Table Provide A Convenient Location Which Can Be Sterilized And Positioned Close To Surgical Sites Without Getting In The Way. Must Have Hydraulic System Adjustable Height Via Foot Pedal And Manual Override System For Easy Maneuvering And Adjustment While Keeping Sterility On Site. Purpose Of Use Clinical Department/ward Ambulatory Surgery Unit Technical Characteristics Recommended Uses For Product: ‎indoor Wheel Type: ‎nylon Caster Wheels Item Weight: Not More Than 7.4 Pounds Number Of Wheels: 4 Pcs With 2 Inch Swivel Caster Wheels With Brake System Caster Type: ‎swivel Weight Limit: Not More Than ‎25 Pounds Frame Material: ‎stainless Steel (304-grade) Or Rust Proof Metal Alloy Special Feature: Hydraulic Adjustable Height W/ Foot Pedal, With Manual Override System Changeable Design Tray: Detachable Tray Tray Size: 650-750mm X 530-550mm X 20-30mm (lwh) Training, Installation And Utilization Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning Local Clinical Staff To Affirm Completion Of Installation Training Of User/s Training Of Users And Biomed Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection. Warranty And Maintenance Warranty 5 Year Warranty Documentation Documentation Requirements • User, Technical And Maintenance Manuals To Be Supplied In English Language. (hard And Soft Copy) • Provide Warranty Certificate Upon Delivery/installation. • List To Be Provided Of Important Spares And Accessories, With Their Brand Names, Part Numbers, Serial Numbers And Cost. Warranty Certificate And Inspection To Be Provided. Delivery Period 45 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Post Qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital And/or Site Visit To Nearest Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Additional Terms Of Reference Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. Slcc Must Be Within 5 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature. Similar In Nature Means, The Bidder Shall Have An Slcc Of Any Medical Equipment. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, At Procurement Section, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 06, 2024 – November 28, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference November 14, 2024 At 9:00 O’clock In The Morning Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/82360165920?pwd=ndy4dclziqayocu32blkxtgzqgw5jv.1 Meeting Id: 823 6016 5920 Passcode: 869461 Deadline Of Submission Of Bids November 28, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com . Opening Of Bids November 28, 2024 At 2:00 P.m. Via Zoom Platform. Link: Join Zoom Meeting Https://us06web.zoom.us/j/87622574433?pwd=agknjohbmjpuh0jn6aikabgsgwbtt1.1 Meeting Id: 876 2257 4433 Passcode: 571792 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1ezfcujc3htid9l92crbxxz4ahjch-7gc?usp=sharing Payment Of Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Philippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before November 28, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On November 28, 2024 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com. 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Details: Description Item Number Description Qty Unit Estimated Budget City Health Unit I: 1 3m Micropore Plaster (1x10 Yards), 12's/box 25 Boxes 22,650.00 2 Sterile Gloves (50pairs/box) Size 7 20 Boxes 23,000.00 3 Sterile Gloves (50pairs/box)size 7 1/2 20 Boxes 23,000.00 4 Sterile Gloves (50pairs/box)size 6 1/2 20 Boxes 23,000.00 5 Gloves, Non-sterile, 100s (medium) 30 Boxes 13,500.00 6 Gloves, Non-sterile, 100s (large) 10 Boxes 4,500.00 7 Cotton 400 G 30 Rolls 7,800.00 8 Alcohol 70% (500 Ml) 217 Bots 32,550.00 9 Povidone Iodine Antiseptic Solution 3 Gals 5,580.00 10 Hydrogen Peroxide 3%, 120 Ml 15 Bottles 1,800.00 11 4x4 Non Sterile Gauze Swab , 100's/pack 130 Packs 27,300.00 12 Adult Diaper Medium (10pcs/pack) 20 Packs 8,440.00 13 Disinfectant Solution 4 Gallons 10,400.00 14 Non-glutaraldehyde/instrument Disinfectant 1 Gallon 2,520.00 15 Iv Cannula (gauge 22) 100s/box 1 Pc 4,500.00 16 Iv Cannula (gauge 26) 100s/box 1 Pc 4,500.00 17 Chromic Catgut 3/0 Absorbable Suture (12/box) 5 Boxes 3,680.00 18 Sterile Syringes W/ Needle (20 Ml) 2 Box 1,260.00 19 Sterile Syringes W/ Needle (3 Ml) 10 Boxes 4,200.00 20 Sterile Syringe With Needle 5cc 3 Boxes 1,950.00 21 Suction Tube (infants) F6 12 Pcs 1,440.00 22 Oxygen Mask (infant) 16 Pcs 2,400.00 23 Oxygen Mask (adult) 20 Pcs. 3,000.00 24 N95 Disposable Mask, 20's/box (3m) 2 Boxes 5,400.00 25 Insulin Syringe (100's) 4 Boxes 5,720.00 26 Cord Clamp 50 Pcs 1,500.00 27 Temporal Scan (forehead) Thermoscanner 14 Pcs 14,000.00 28 Torniquet (for Iv) 10 Pcs 500.00 29 Underpad (25 Pcs/pack) 13 Packs 6,838.00 30 Surgical Mask (50 Pcs/box) 100 Boxes 10,000.00 31 Disposable Cups 150 Pcs 750.00 32 Urinary Catheter (straight) French 18-24 1 Dozen 1,323.00 33 Lubricating Jelly 500ml/tube 5 Tubes 5,900.00 34 Cotton Applicator 2 Boxes 664.00 35 Digital Bp Apparatus 14 Units 35,000.00 36 Fetal Doppler 6 Units 25,200.00 37 Sphygmomanometer W/ Stethoscope (heavy Duty) 2 Units 8,000.00 38 Needle Holder (size 7) 1 Pc 650.00 39 Nasal Canula (pedia) 16 Pcs 2,400.00 40 Nasal Canula (adults) 16 Pcs 2,400.00 41 Microset (25/pack) 2 Pcs 1,200.00 42 Macroset (25/pack) 2 Pcs 1,200.00 43 Flannel Cloth (10x10") 1 Dozen 1,500.00 44 Ice Bag 10 Pcs. 1,300.00 45 Graduated Cylinder Set (thick Glass) (10ml, 25ml, 50 Ml,100 Ml) 1 Set 2,500.00 46 Graduated Cylinder 50ml (plastic) 2 Pcs 1,260.00 47 Pill Counting Tray With Spatula 1 Pc 432.00 48 Tablet Cutter 2 Pcs 400.00 49 Pulse Oximeter 8 Units 12,960.00 50 Surgical Scissors (standard Size) 5 Pcs 900.00 51 Tissue Forcep (standard Size) (6 1/4" Size) 5 Pcs 700.00 52 Straight Kelly Forceps (standard Size) (6 1/4" Size) 5 Pcs 1,200.00 53 Curved Kelly Forceps (standard Size) (6 1/4" Size) 5 Pcs 900.00 54 Tissue Forcep W/ Teeth (6 1/4" Size) 2 Pcs 1,600.00 55 Tissue Forcep Without Teeth (6 1/4"size) 2 Pcs 1,600.00 56 Ovum Forceps Size 9 1/2" (straight) 1 Pc 2,834.00 57 Glucometer 8 Pcs. 7,600.00 58 Glucose Strips 50's/bottle 50 Bots. 42,000.00 59 Lancets 100's/box 20 Boxes 8,400.00 For Vaccination: 60 Cotton Balls @ 150balls/packs 25 Packs 1,750.00 61 Pulse Oximeter 1 Unit 1,620.00 62 Digital Bp 1 Unit 2,239.74 63 Bp Kit Aneroid And Stethoscope Manual 1 Unit 1,500.00 64 Digital Themoscanner 2 Pcs 2,000.00 Epidemiology And Disease Surveillance 65 Overall White Disposable 4 Pcs. 4,492.00 66 Clear Polycarbonate, Anti-mist, Vented Safety Googles, Scratch Resistant Uv Protection 4 Pcs. 5,808.00 67 N95, Ffp1, Valved Adjustable Nose Clips Face Mask, Box Of 10's 1 Box 2,700.00 68 Universal Disposable Shoe Cover, Box Of 500's 1 Box 350.00 69 Clean Latex Gloves Disposable, Box Of 100's 2 Boxes 900.00 70 Surgical Mask (50 Pcs/box) 5 Boxes 500.00 71 Cotton Rolls 400g/roll 10 Rolls 2,600.00 72 Isoprophyl Alcohol 70% Solution, 500ml 10 Bots 1,500.00 City Health Unit Ii: 73 Sterile Gloves (50pcs/box) Size 7.5 30 Boxes 34,500.00 74 4x4 Non Sterile Gauze Swab , 100's/pack 100 Packs 21,000.00 75 Alcohol 70%, 500 Ml 202 Bots 30,300.00 76 Micropore Plaster 1", 12 Rolls/box 20 Boxes 18,120.00 77 Povidone Iodine Antiseptic Solution 15 Gals. 27,900.00 78 Adult Diaper Large (10pcs/pack) 30 Packs 12,660.00 79 Underpad (24/pack) 28 Packs 14,728.00 80 Disinfectant Solution Concentrate 8 Gallons 20,800.00 81 Catgut (chromic 3/0) Curved Cutting (12/box) 2 Boxes 1,472.00 82 Catgut (chromic 4/0) Curved Cutting (12/box) 2 Boxes 1,472.00 83 Catgut (chromic 3/0) Round Bodied (12/box) 2 Boxes 1,472.00 84 Suture Silk 3/0,non-absorbable Curved Cutting (12/box) 2 Boxes 1,472.00 85 Suture Silk 4/0,non-absorbable Curved Cutting (12/box) 2 Boxes 1,472.00 86 Sterile Syringes W/ Needle (20 Ml) 50/box 1 Box 630.00 87 Sterile Syringes W/ Needle (3 Ml) 20 Boxes 8,400.00 88 Sterile Syringes W/ Needle 5ml 5 Boxes 5,250.00 89 Sterile Syringes W/ Needle 1ml 10 Boxes 8,000.00 90 Sterile Syringes W/ Needle 0.5ml 10 Boxes 14,700.00 91 Sterile Syringes W/ Needle 0.05ml (gauge 27) 20 Boxes 40,000.00 92 Suction Tube (infants) 10 Pcs 1,200.00 93 Oxygen Mask (neonate) 5 Pcs 750.00 94 Oxygen Mask (infant) 10 Pcs 1,500.00 95 Oxygen Mask ( Adults) 10 Pcs 1,500.00 96 Urinary Catheter (straight) French 16 1 Doz. 1,323.00 97 Urobag 10 Pcs 570.00 98 Lubricating Jelly 500ml/tube 20 Tubes 23,600.00 99 Cotton Applicator 3 Boxes 996.00 100 Nasal Cannula (pedia) 10 Pcs 1,500.00 101 Nasal Cannula (adults) 10 Pcs 1,500.00 102 Microset (25/pack) 1 Pack 600.00 103 Macroset (25/pack) 2 Packs 1,200.00 104 Soluset 5 Pcs 1,500.00 105 I V Canula (gauge 20) Pink Color (100/box) 1 Box 4,500.00 106 Gloves,non-sterile, Medium Size ( 100/box) 23 Boxes 10,350.00 107 Gloves,non-sterile, Large Size ( 100/box) 23 Boxes 10,350.00 108 Tongue Depressor (100/pack) 3 Packs 792.00 109 Nasogastric Tube (french 16) Siliconized 3 Pcs 1,560.00 110 Pediatric Sphygmomanometer 1 Unit 2,500.00 111 Needle Holder (8 Inches) 2 Pcs 1,300.00 112 Adson Tissue Forcep 4 3/4" 3 Pcs 2,400.00 113 Tissue Forcep With Teeth (6") 2 Pcs 1,600.00 114 Tissue Forcep Without Teeth (6") 2 Pcs 1,600.00 115 Mayo Scissors Straight 7 1/4" 2 Pcs 3,272.00 116 Mosquito Forcep Curve 5" 6 Pcs 1,800.00 117 Skin Stapler Remover, 5.8mm X 4.1mm; 6.5mm X 4.1mm (1 Pc Each Size) 2 Pcs 1,590.00 118 Kelly Forcep Straight (6 1/4"-6 1/2" Size) 2 Pcs 1,888.00 119 Kelly Forcep Curved (6 1/4"-6 1/2" Size) 2 Pcs 1,892.00 120 Metzenbaum Scissors Straight 14cm 2 Pcs 3,400.00 121 Non-glutaraldehyde/instrument Disinfectant 12 Gal 30,240.00 122 Tourniquet For Iv (flat Rubber) 10 Pcs 300.00 123 Elastic Bandage 4inches Width 20 Pcs. 1,400.00 124 Cord Clamp 200 Pcs 6,000.00 125 Fetal Doppler (chargeable) 6 Unit 25,200.00 126 Glucometer With Lancing Device Sinocare 10 Pcs. 9,500.00 127 Glucose Strips 50's/bottle Sinocare 10 Bots. 8,000.00 128 Lancets 100's/box 7 Boxes 2,940.00 129 Medical Oxygen Refill, 50l 10 Refill 14,000.00 City Health Unit Iii: 130 Micropore Plaster 1" 4 Boxes 3,624.00 131 Sterile Gloves (50pairs/box) Size 7 5 Boxes 5,750.00 132 Sterile Gloves (50pairs/box)size 6 1/2 5 Boxes 5,750.00 133 Gloves, Non-sterile, 100pcs/box (medium) 4 Boxes 1,800.00 134 Gloves, Non-sterile, 100pcs/box (large) 4 Boxes 1,800.00 135 Cotton 400 G 9 Rolls 2,340.00 136 Alcohol 70% (500 Ml) 50 Bots 7,500.00 137 Povidone Iodine Antiseptic Solution 10% 5 Gals 9,300.00 138 Hydrogen Peroxide 3%, 120 Ml 5 Bottles 600.00 139 4x4 Sterile Gauze Swab , 100pcs/pack 5 Packs 5,000.00 140 4x4 Non Sterile Gauze Swab , 100's/pack 20 Packs 4,200.00 141 Adult Diaper Large (10pcs/pack) 20 Packs 8,440.00 142 Disinfectant Spray (alkyl Dimethyl Benzyl Ammoniumsaccharinate) 510ml 5 Bots 4,900.00 143 Disinfectant Concentrate (o-benzyl-p-chorophenol) 3 Gallons 7,800.00 144 Non-glutaraldehyde/instrument Disinfectant 2 Gallons 5,040.00 145 Pedia Microset/iv Infusion Set 20 Pcs 12,000.00 146 Adult Macroset/ Iv Infusion Set 19 Pcs 11,400.00 147 Soluset (60 Microdrops/ml) 10 Pcs 3,000.00 148 Heplock 100s/box 1 Box 5,000.00 149 Iv Cannula (gauge 26) 100s/box 1 Box 4,500.00 150 Iv Cannula (gauge 24) 100s/box 1 Box 4,500.00 151 Iv Cannula (gauge 20) 100s/box 1 Box 4,500.00 152 Iv Cannula (gauge 18) 100s/box 1 Box 4,500.00 153 Suture Chromic Catgut 3-0 Absorbable 12/box 2 Boxes 1,472.00 154 Suture Chromic Catgut 4-0 Absorbable 12/box 2 Boxes 1,472.00 155 Suture Silk 2-0,non-absorbable Curved Cutting 12/box 2 Boxes 1,472.00 156 Suture Silk 3-0,non-absorbable Curved Cutting 12/box 2 Boxes 1,472.00 157 Suture Silk 4-0,non-absorbable Curved Cutting 12/box 2 Boxes 1,472.00 158 Suture Silk 5-0,non-absorbable Curved Cutting 12/box 2 Boxes 1,472.00 159 Sterile Syringes W/ Needle (10 Ml) 100's/box 2 Boxes 2,000.00 160 Sterile Syringes W/ Needle (5 Ml) 100's/box 2 Boxes 2,100.00 161 Sterile Syringe With Needle (3 Ml) 100's/box 2 Boxes 840.00 162 Sterile Syringe With Needle (1 Ml) 100's/box 2 Boxes 1,600.00 163 Suction Tube (pedia) 10 Pcs 1,200.00 164 Suction Tube (adults) 10 Pcs 2,000.00 165 Oxygen Mask (pedia) 50 Pcs 7,500.00 166 Oxygen Mask (adults) 50 Pcs 7,500.00 167 N95 Disposable Mask, 20's/box 5 Boxes 13,500.00 168 Umbilical Cord Clamp 50's/box 2 Boxes 3,000.00 169 Tourniquet Rubber Flat 3's/pack 3 Packs 90.00 170 Underpad/dri Sheet 900x600 Mm (10's/pack) 48 Packs 25,248.00 171 Surgical Face Mask (50 Pcs/box) 10 Boxes 2,400.00 172 Lubricant Jelly 5g (100's/box) 2 Boxes 2,360.00 173 Cotton Applicator Sterile (100's/box) 3 Boxes 996.00 174 Nasal Canula (pedia) 50 Pcs 7,500.00 175 Nasal Canula (adults) 50 Pcs 7,500.00 176 Retractable Tape Measure 150cm 10 Pcs 500.00 177 Flannel Cloth (12x18") 100 Pcs 10,000.00 178 Surgical Blades #10 (100's/box) 2 Boxes 1,050.00 179 Surgical Blades #11 (100's/box) 2 Boxes 1,050.00 180 Surgical Blades #15 (100's/box) 2 Boxes 1,050.00 181 Lap Pack/sponge (8x12x12ply 28x24mesh) 50 Pcs 4,000.00 182 Sterile Needle G.19 200 Pcs 2,000.00 183 Rubber Suction 60ml 2 Pcs 200.00 184 Nebulizing Machine 2 Units 6,000.00 185 Bp Apparatus 2 Units 5,520.00 186 Iris Scissors 4 1/2" Curve 3 Pcs 2,208.00 187 Bandage Scissors 4 1/2" 2 Pcs 2,220.00 188 Metzenbaum Scissors 7" Straight 2 Pcs 3,400.00 189 Mayo Scissor 6 3/4" Straight 2 Pcs 3,276.00 190 Needle Holder 7" 2 Pcs 1,300.00 191 Mosquito Forcep 5" Straight 5 Pcs 1,500.00 192 Mosquito Forcep 5" Curve 5 Pcs 1,500.00 193 Kelly Forceps 6 1/4" Straight 2 Pcs 1,888.00 194 Kelly Forceps 6 1/4" Curve 2 Pcs 1,892.00 195 Ovum Forceps Size 9 1/2" (straight) 1 Pc 2,834.00 196 Pean Forcep 7" Curve 2 Pcs 1,600.00 197 Allis Tissue Forcep 7" 2 Pcs 1,200.00 198 Uterine Forcep 1 Pc. 2,160.00 199 Tissue Forcep W/ Teeth 7" 4 Pcs 960.00 200 Tissue Forcep Without Teeth 7" 2 Pcs 924.00 201 Sims Vaginal Speculum 30x35x70mm 1 Pc 1,800.00 202 Contact Digital Thermometer 10 Pcs 2,000.00 203 Pulse Oximeter (heavy Duty) 2 Pcs 3,240.00 204 Pen Light Heavy Duty 2 Pcs 400.00 205 Hot Water Bag 100 Ml 2 Pcs 300.00 206 Ice Bag 9" 2 Pcs 300.00 207 Instrument Tray 9"x6" 3 Pcs 1,620.00 208 Instrument Tray 11x7 Inch 2 Pcs 1,320.00 209 Cotton Canister W/ Cover Stainless (3’s) 10 Cm 1 Set 720.00 210 Bathroom Weighing Scale 2 Pcs 1,000.00 211 Kidney Basin Stainless 10" 3 Pcs 1,500.00 212 Scalpel Holder #3 3 Pcs 612.00 213 Scalpel Holder #4 3 Pcs 612.00 214 Iv Stand 1 Pc 1,800.00 215 Graduated Cylinder Glass 250ml 1 Pc 390.00 216 Graduated Cylinder Glass 50ml 1 Pc 180.00 217 Pill Counting Tray With Spatula 1 Pc 432.00 218 Tablet Cutter 1 Pc 200.00 219 Fetal Doppler Rechargeable 5 Pcs 21,000.00 Chu Iii Laboratory: 220 4-parameter Urine Chemical Strip 5 Bots 7,200.00 221 Glass Slides (clear Glass) 72pcs/box 5 Boxes 1,500.00 222 Glass Slides (frosted End) 72pcs/box 5 Boxes 1,500.00 223 10ml Glass Test Tubes 24 Pcs 4,320.00 224 Plastic Cups 100 Pcs 600.00 225 Microhematocrit Tubes (red Tips) 100pcs/vial 5 Vials 1,500.00 226 Microhematocrit Clay Sealer 5 Pcs 1,320.00 227 Disposable Lancet 23g (200s) 3 Boxes 1,260.00 228 Glucose Strips With Glucometer (50pcs/box) 6 Boxes 14,040.00 229 Blood Typing Sera (a&b) 2 Bottles/box 3 Sets 6,300.00 230 Blood Typing Sera (rh) 3 Bots 6,300.00 231 Alcohol (500ml) 20 Bots 1,500.00 232 Gloves, Non-sterile, 100pcs/box (large) 5 Boxes 2,250.00 233 Disinfectant Spray (alkyl Dimethyl Benzyl Ammoniumsaccharinate) 510ml 6 Bots 4,050.00 234 Disinfectant Concentrate (o-benzyl-p-chorophenol) 2 Galloons 5,200.00 235 Sterile Syringe With Needle (3 Ml) 100's/box 6 Boxes 2,520.00 236 Sterile Syringe With Needle (1 Ml) 100's/box 1 Box 800.00 237 Surgical Face Mask (50 Pcs/box) 10 Boxes 1,800.00 Chu-i & Chu Ii Dental Services: 238 Dental Needle Long 27 G 3 Boxes 1,422.00 239 Dental Needle Short Ex G. 30, Box Of 100 3 Boxes 1,422.00 240 Dental Needle Short G 27, Boxes Of 100 10 Boxes 4,740.00 241 Latex Examination Gloves Xs/box 168 Boxes 83,352.00 242 Disposable N 95 Mask, Box Of 20 30 Boxes 12,000.00 243 Disposable Surgical Mask 30 Boxes 3,000.00 244 Suction Tip Packs Of 100pcs 9 Packs 2,025.00 245 Surgical Burs/pc 2mm (round) 14 Sets 4,900.00 246 Surgical Burs/ Pc 2mm(tapered ) 14 Pcs. 4900 247 Surgical Burs/ Pc 2mm (straight) 14 Pcs. 4900 248 Burs 1mm Round /pc 40 Pcs. 3,200.00 249 Burs 1mm Inverted Triangle /pc 60 Pcs. 4,800.00 250 Composite A2 /pc 64 Pcs. 115,200.00 251 Composite A3 /pc 14 Pcs. 25,200.00 252 Bonding Agent /pc 16 Pcs 16,000.00 253 Composite Finishing Burs Set For High Speed 6 Sets 3,000.00 254 Disposable Head Cap/bouffant Cap 3 Pcs. 900.00 255 Phosphoric Acid Etchant/10ml 5 Pcs. 3,125.00 256 Clear Celluloid Strip/50pcs 10 Boxes 400.00 257 Articulating Paper 10 Boxes 2,700.00 258 Prophybrush 100/set 2 Sets 1,200.00 259 Cotton Roll 400g/roll 4 Rolls 1,040.00 260 Gel Foam 10 Pcs. 6,000.00 261 Dental Bib 20 Pcs. 7,000.00 262 Plastic Disposable Cups 320 Pcs. 1,600.00 263 Liquid Soap1l 10 Bot. 1,200.00 264 Medium Size Garbage Bag (yellow) 20 Rolls 4,200.00 265 Disinfectant Solution Glutaraldehyde (medical Grade) 5l/gal 40 Gal 100,000.00 266 Vicryl Polyglactin 910 Suture 4-0 1 Boxes 10,080.00 267 Chlorhexidine Gluconate O.12 % 380ml 20 Bots. 8,400.00 268 Blade # 11, Box Of 100 1 Box 850.00 269 Blade # 15, Box Of 100 1 Box 850.00 270 Pumice Powder,bottles Of 500g 2 Bottles 300.00 271 Bouffant Cap, Packs Of 100 3 Packs 900.00 272 Disinfectant Spray 510g 24 Bottles 16,200.00 273 Disposable Shoe Cover, Pack Of 100 1 Pack 250.00 274 Alcohol 1gl 10 Gallons 4,200.00 275 Anti Rust Spray 4 Bottles 1,800.00 276 Hyaloronic Acid 10 Tubes 10,000.00 277 Cavity Liner (flowable) 14 Tubes 22,400.00 For Tc-ucc: 278 Micropore Plaster 1" 12rolls/box 51 Boxes 46,206.00 279 Gauze 4x4 100's/pack 680 Packs 142,800.00 280 Gauze Roll 6 Rolls 21,000.00 281 Alcohol 70% 500cc Bot 925 Bots 69,375.00 282 Micro Set 200 Pcs. 11,000.00 283 Macro Set 200 Pcs 11,000.00 284 Nebulizing Kit Adult 100 Pcs 5,000.00 285 Nebulizing Kit Pedia 100 Pcs 5,000.00 286 Glucometer Strips (rover) 300 Strips 7,200.00 287 Glucometer Strips ( Bionime Gm700) 500 Strips 5,900.00 288 Povidone Iodine 10% Antiseptic Solution 5 Gals 6,600.00 289 Iv Canulla G22 100units/box 2 Boxes 9,000.00 290 Benzalkonium Cl 1.55%, Didecyldimethyllammonium Cl 4.7% Polyhexamethylenebiguanide Hcl 4.33% Gallon 5 Gals 58,750.00 Xxxxxxx Total: 2,205,636.74

Tender Id: 39/2024 Valverde de Leganés | Materials Necessary for the Execution of Action "Use of the Cerro de los Mártires as a Grazing Area for Sheep"

Tender Id: 680/2023 Valverde de Leganés | Adapted Transportation Service for People with Reduced Mobility to the Local Day Center

Tender Id: 189/2022 Valverde de Leganés | Execution of the Works Corresponding to the Project called “execution of the Works Contained in the Project for the Continuation of the Hydrological Protection Works of the Arroyo de La Nave, Phase 1

Details: Description Invitation To Bid Pb-020-2024 Supply And Delivery Of Technical Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools 1. The Department Of Education, Schools Division Of Ilocos Sur Through The Republic Act No. 11975 – Fy 2024 Gaa (sub-allotment Release Order No. Roi-24-1175) Intends To Apply The Sum Of Two Million Three Hundred Thirty-six Thousand Two Hundred Eighty Pesos (p2,336,280.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Supply And Delivery Of Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools. Bids Received Higher Than The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Project Description Qty. Unit Unit Cost Abc For The Project (in Php) Tvl Tools & Equipment (bread And Pastry Production) 1 Air Compressor With Airbrush Cake Decorating Set (medium) Pc 1 2,414.00 2,414.00 2 Beater (standard) Pc 6 287.00 1,722.00 3 Board, Chopping, 6 Color Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Set 6 920.00 5,520.00 4 Boiler, Double (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) Set 1 1,955.00 1,955.00 5 Bowl, Mixing (6 Pcs/set) Pc 12 2,415.00 28,980.00 6 Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 Pc 6 1,725.00 10,350.00 7 Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tiers Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3: 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Pc 6 1,725.00 10,350.00 8 Cake Turn Table (body Shape: Circular Material: Cast Aluminum Plate. And Cast-iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm) Pc 3 1,265.00 3,795.00 9 Coupler (tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case) Pc 13 207.00 2,691.00 10 Cup, Measuring (for Solid) The Standard 4 Measuring Cup Sizes Are: 1 Cup, 1/2 Cup, 1/3 Cup And 1/4 Cup Set 12 977.00 11,724.00 11 Cup, Measuring, 250 Ml For Liquid Pc 12 632.00 7,584.00 12 Cup, Measuring, 500ml For Liquid Pc 12 747.00 8,964.00 13 Cutter, Dough (stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length: 15 Cm X Width: 11 Cm X Thickness: 1.2mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) Pc 1 402.00 402.00 14 Cutter, Pie (medium) Pc 6 460.00 2,760.00 15 Flour Sifter, Hand Cranked (standard) Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh #30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Pc 6 747.00 4,482.00 16 Grater 4 Sided (s) Pc 6 402.00 2,412.00 17 Knife, Kitchen (s) Pc 6 747.00 4,482.00 18 Knife, Pallet (s) Pc 6 573.00 3,438.00 19 Ladle, 3 0z Pc 6 241.00 1,446.00 20 Loaf Pan Big Pc 6 862.00 5,172.00 21 Loaf Pan, Medium Pc 6 517.00 3,102.00 22 Loaf Pan, Small Pc 6 126.00 756.00 23 Muffin Pan, Big Pc 6 448.00 2,688.00 24 Muffin Pan, Medium Pc 6 414.00 2,484.00 25 Muffin Pan, Small Pc 6 322.00 1,932.00 26 Pie Pan, 10 Inches Diameter Pc 6 517.00 3,102.00 27 Pie Pan, # 6, #8, #10 Set 6 1,265.00 7,590.00 28 Pillars, Cake (big) Pc 6 517.00 3,102.00 29 Piping Bag (100 Pcs Per Pack) (m) Pack 25 241.00 6,025.00 30 Rectangular Pan, (7” X 11”) Pc 4 263.00 1,052.00 31 Rolling Pins (3cm X 10 Cm) Pc 12 402.00 4,824.00 32 Rubber Scraper (m) Pc 12 207.00 2,484.00 33 Sauce Pan 22cm Pc 13 632.00 8,216.00 34 Sheet Pan (m) Pc 15 517.00 7,755.00 35 Spoon, Measuring (plastic) ¼ Teaspoon, ½ Teaspoon, 1 Teaspoon, And 1 Tablespoon Set 26 287.00 7,462.00 36 Spoon, Wooden (s) Pc 15 92.00 1,380.00 37 Strainer Stainless (m) Pc 15 212.00 3,180.00 38 Tip, Decorating X 24 (small To Large) Set 23 632.00 14,536.00 39 Weighing Scale, 10 Kgs (digital) Pc 13 2,875.00 37,375.00 40 Weighing Scale,5 Kgs, (digital) Pc 13 1,265.00 16,445.00 41 Wire Whisk, Medium Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Pc 13 286.00 3,718.00 Sub Total 259,851.00 Tvl Tools & Equipment (computer System Servicing) 42 Allen Wrench (set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm;) Set 50 450.00 22,500.00 43 Anti-static Device (anti-static Wrist Strap) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor Pc 50 250.00 12,500.00 44 Combination Pliers, 8" Pc 50 350.00 17,500.00 45 Crimping Tool (rj 11/45) Pc 52 450.00 23,400.00 46 Desoldering Pump (plastic Or Aluminum Housing) Pc 52 250.00 13,000.00 47 Electric Drill, Portable (rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts) Pc 4 4,000.50 16,002.00 48 External Optical Drive Cd-r Dvd-r (interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd) Pc 6 1,000.00 6,000.00 49 Flash Drive (1tb) Pc 52 850.00 44,200.00 50 Flashlight, Head-mounted (rechargeable) Minimum Of 160 Lumens; Beam Distance: Minimum Of 150 Meters; Includes 220 V Ac Charger/power Adaptor (or Equivalent) Pc 50 550.00 27,500.00 51 Hub / Switch ( Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix External Power Supply Adapter: 100-240vac,50/60hz Fanless Data Rates: 10/100mbps At Half Duplex; 20/200mbps At Full Duplex Led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 Dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) Pc 42 2,000.00 84,000.00 52 Lan Cable Tester (1. Package Contents: 8-port 10/100mbps Desktop Switch, Power) Pc 50 252.00 12,600.00 53 Long Nose Pliers, 8" Pc 50 200.00 10,000.00 54 Multimeter, Digital (auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Overload Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5 Pc 40 800.00 32,000.00 55 Patch Panel (48 Ports) Cat6 Cable Material: Abs Plastic Application: Utp(unshielded) Certification: Rohs, Iso, Ce Rj45 Connector: Two Rows (1-24 Ports & 25-48 Ports) Transport Package: 1pcs/box Pc 50 2,500.00 125,000.00 56 Pc Video Camera (5.0 Mega Pixel Web Camera, Usb-type; With Microphone For Laptop And Desktop Pc Use; Resolution: At Least 640 X 480; Support Windows Xp/7/8/equivalent Mac Os Or Later Versions) Pc 20 500.00 10,000.00 57 Phillip’s Screwdriver, 8" Insulated Pc 50 250.00 12,500.00 58 Precision Screwdriver Set (1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1; 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet; Plastic Storage Case;) Set 50 500.00 25,000.00 59 Soldering Iron, 60w Pc 50 250.00 12,500.00 60 Standard Screwdriver (flat), 8” Insulated Pc 50 250.00 12,500.00 61 Uninterruptible Power Supply (ups) Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof Voltage: Nominal Input Voltage: 230v, 50/60hz Output Power Capacity: 600va (minimum) Pc 40 4,000.00 160,000.00 62 Usb External Hd 1tb Pc 10 3,500.00 35,000.00 63 Wire Stripper (10 Awg To 24 Awg Length: 7 Inches (minimum) Pc 54 250.00 13,500.00 64 Wireless Access Point ( Access Point Dual Band Wi-fi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) Pc 50 1,500.00 75,000.00 Subtotal 802,202.00 Tvl Tools & Equipment (cookery) 65 Apple Corer (material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Pc 10 444.00 4,440.00 66 Bain Marie, Table ( Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 4 20,700.00 82,800.00 67 Blender, Electric (material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220volts/ 240volts, 50hz/ 60hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades) Pc 4 2,875.00 11,500.00 68 Board, Chopping/cutting, Plastic (board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) Pc 20 289.00 5,780.00 69 Boiler, Double (stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Sides Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 3 Liters (minimum) Pc 2 2,128.00 4,256.00 70 Braising Pan, Medium Pc 10 1,494.00 14,940.00 71 Can Opener (stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Pc 4 242.00 968.00 72 Casserole, Medium Pc 10 702.00 7,020.00 73 Casserole, Small Pc 12 669.00 8,028.00 74 Colander, Medium Pc 10 340.00 3,400.00 75 Colander, Small Pc 10 303.00 3,030.00 76 Cup, Measuring (for Solid) (cup, 1/2 Cup, 1/3 Cup, 1/4 Cup And 1/8 Cup.) Set 10 518.00 5,180.00 77 Dispenser, Paper Towel (abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Pc 10 403.00 4,030.00 78 Stand Fan, Electric (metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220/240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Pc 5 1,495.00 7,475.00 79 Fire Extinguisher (with Contents) Capacity 5 - 6 Kgs Rechargeable Cylinder Metal Working Pressure Of Cylinder: 400 Psi Pc 1 2,875.00 2,875.00 80 Fish Poacher, Medium (oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm) Pc 10 2,076.00 20,760.00 81 Fork, Carving (square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prongs Comes With Square - Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle) Pc 10 593.00 5,930.00 82 Fork, Kitchen (body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End Pc 10 248.00 2,480.00 83 Frying Pan, Large Pc 10 438.00 4,380.00 84 Frying Pan, Medium Pc 10 334.00 3,340.00 85 Frying Pan, Small Pc 12 296.00 3,552.00 86 Funnel, S/s, Medium Pc 10 242.00 2,420.00 87 Funnel, S/s, Small Pc 10 207.00 2,070.00 88 Garbage Bin (material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel) Pc 4 863.00 3,452.00 89 Glass Rack (body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 ½ Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case) Pc 12 817.00 9,804.00 90 Ice Cream Scooper (medium) Pc 2 288.00 576.00 91 Knife, Boning (28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets) Pc 10 564.00 5,640.00 92 Knife, Chef (chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) Pc 10 449.00 4,490.00 93 Knife, Cleaver (forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets) Pc 10 552.00 5,520.00 94 Knife, Oyster (stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) Pc 10 547.00 5,470.00 95 Light, Emergency (metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector ) Pc 1 2,013.00 2,013.00 96 Meat Slicer (die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 10 3,220.00 32,200.00 97 Pastry Tube (standard) Pc 10 633.00 6,330.00 98 Peeler, Y-type (stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Pc 10 275.00 2,750.00 99 Pepper And Salt Mill (round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices) Pc 10 1,380.00 13,800.00 100 Piping Bag (transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) Pc 10 242.00 2,420.00 101 Plate Rack (body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) Pc 12 2,099.00 25,188.00 102 Preparation Table With Sink (stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) Pc 10 4,485.00 44,850.00 103 Pressure Cooker (polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring) Pc 2 5,520.00 11,040.00 104 Roasting Pan (medium) Pc 10 1,840.00 18,400.00 105 Scissor, Kitchen (body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) Pc 10 448.00 4,480.00 106 Siever, Small (stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Pc 10 677.00 6,770.00 107 Skimmer, Fine (stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Pc 10 758.00 7,580.00 108 Skimmer, Spider (stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm(minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Pc 10 472.00 4,720.00 109 Soup Cup Rack (polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm) Pc 12 1,553.00 18,636.00 110 Soup Ladle, 12 Oz Pc 10 472.00 4,720.00 111 Soup Ladle, 3 Oz Pc 10 300.00 3,000.00 112 Soup Ladle, 6 Oz Pc 10 403.00 4,030.00 113 Soup Ladle, 8 Oz Pc 10 455.00 4,550.00 114 Spatula (stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches) Pc 8 294.00 2,352.00 115 Spoon, Kitchen (stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type) Pc 8 403.00 3,224.00 116 Spoon, Kitchen (slotted) Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Pc 8 386.00 3,088.00 117 Spoon, Measuring (body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. (7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) Set 8 291.00 2,328.00 118 Spoon, Parisienne Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Pc 8 301.00 2,408.00 119 Spoon, Serving (stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Pc 24 365.00 8,760.00 120 Spoon, Wooden Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Pc 8 92.00 736.00 121 Stock Pot, Large (stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. Pc 5 2,703.00 13,515.00 122 Strainer Chinois, Small Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Pc 5 380.00 1,900.00 123 Strainer Chinois, Medium (stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Pc 5 420.00 2,100.00 124 Strainer Medium, Fine Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Pc 8 248.00 1,984.00 125 Strainer Small, Fine Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Pc 8 240.00 1,920.00 126 Tenderizer, Medium Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Pc 8 559.00 4,472.00 127 Thermometer, Pocket /pin Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f Pc 10 880.00 8,800.00 128 Tong, 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 10 322.00 3,220.00 129 Tong, 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Pc 10 291.00 2,910.00 130 Tray, Baking, Small Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Pc 10 548.00 5,480.00 131 Tray, Utility Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Pc 12 644.00 7,728.00 132 Turner 3" X 6" Pc 10 541.00 5,410.00 133 Utility Cart Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Pc 2 14,713.00 29,426.00 134 Weighing Scale, 1 Kg, Digital Engineering Plastic And Stainless-steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm) 163 Mm X 245 Mm X 79 Mmm (minimum) Pc 6 1,630.00 9,780.00 135 Weighing Scale, 5 Kg Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Pc 10 1,794.00 17,940.00 136 Wire Skimmer, Small Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Pc 10 408.00 4,080.00 137 Wire Whisk, Heavy Duty: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Pc 2 564.00 1,128.00 138 Wire Whisk, Medium Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 488.00 4,880.00 139 Wire Whisk, Small Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 372.00 3,720.00 140 Wok, Medium: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Pc 10 771.00 7,710.00 141 Wok, Small Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Pc 10 679.00 6,790.00 142 Working Table Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Pc 5 13,628.00 68,140.00 143 Zester Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe Pc 10 397.00 3,970.00 Sub Total 702,982.00 Tvl Tools & Equipment (food And Beverages Services) 144 Chair, Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box Pc 50 1,955.00 97,750.00 145 Coffee Pot, 2 Pints Round Material: Stainless Steel With Cover Capacity: 2 Pints Outside Diameter: 90 -110 Mm Over-all Height: 200 - 230 Mm Thickness: 0.5 - 1 Mm Pc 4 1,139.00 4,556.00 146 Container, Creamer Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height: 80 - 105 Mm Color: White Pc 10 288.00 2,880.00 147 Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality Packed In Carton Box Pc 24 403.00 9,672.00 148 Fork, Cocktail Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Type: Rounded Tip Handle Over-all Length: 110 - 165 Mm Width: 20 - 30 Mm (minimum) Handle Thickness: 2 Mm To 4 Mm Handle Length: 75 - 90 Mm Small, Colo: Silver The Item Must Be Branded And Have Good Quality. Pc 24 173.00 4,152.00 149 Fork, Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150 Mm - 175 Mm Width: 20 – 30mm Handle Thickness: 1.5mm - 3 Mm Number Of Tines: 4 Handle: 130 Mm (minimum) Color: Silver Pc 24 173.00 4,152.00 150 Fork, Dinner Fork Body Shape: Fork Shape Material / Appearance: Stainless Steel, Highly Polished, With 4tines Over - All Length: 120 - 175 Mm Thickness Of Handle: 2 - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality Pc 24 196.00 4,704.00 151 Fork, Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180 - 215 Mm Fork Width: 1.5 Mm - 3 Mm Fork Thickness: 1 Mm - 2 Mm Number Of Tines: 4 Length Handle: 120 - 130 Mm Handle Thickness: 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Pc 24 288.00 6,912.00 152 Fork, Oyster (4 To 5-1/2 Inches In Overall Length.) Pc 24 173.00 4,152.00 153 Glass, Champagne Flute Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Pc 24 288.00 6,912.00 154 Glass, Collins Tumbler Body Shape: Round Material: Clear Glass Capacity: 10 Oz To 14 Oz Thickness: 1.5 -3 Mm (minimum) Packed In Carton Box Pc 24 173.00 4,152.00 155 Glass, Juice / Hi- Ball Material: Clear Glass Type: Hi-ball Height: 140 - 160 Mm Bottom Diameter: 50 -70 Mm Top Diameter: 50 - 70 Mm Thickness: 2 - 4 (minimum) Capacity: 8 Oz. To 10 Oz. Dishwasher Safe The Item Must Be Branded And Good Quality Pc 24 518.00 12,432.00 156 Glass, Pilsner (iced Tea Glass) Type: Flared Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass: 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality Pc 24 288.00 6,912.00 157 Glass, Red Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity: 250 -300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 85 - 90 Mm Base Diameter: 75 - 85 Mm Base Thickness: 2 - 4 Mm Pc 24 403.00 9,672.00 158 Glass, White Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 - 3 Mm Over -all Length: 200 -220 Mm Capacity: 270 - 300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 75 - 85 Mm Base Diameter: 70 - 80 Mm Base Thickness: 2 - 5 Mm Pc 24 443.00 10,632.00 159 Gravy Boats Boat Shape With Handle Material: Stainless Steel Capacity: 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Pc 4 225.00 900.00 160 Ice Bucket, 2 Liters With Tongs Circular Set Includes: Ice Bucket Material: Stainless Steel Diameter: 140 - 180 Mm Height: 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity: 2 Liters (minimum) Pc 5 471.00 2,355.00 161 Knife, Butter Stainless Steel W/ Highly Polished Appearance Over-all Length: 140 Mm - 150 Mm Handle Thickness: 3 Mm - 5 Mm With Dull Edge And Rounded Tip Pc 24 127.00 3,048.00 162 Knife, Dinner Flat With Round Tip Material / Appearance: Stainless Steel Blade Highly Polished Handle Material: Stainless Steel Overall Length: 160 - 190 Mm Blade Thickness: 2 - 4 Mm Handle Thickness: 3 - 6 Mm Pc 24 213.00 5,112.00 163 Knife, Fish Flat With Pointed Tip Material / Appearance: Stainless Steel, Highly Polished W/ Plain Design Overall Length: 200 - 220 Mm Width Blade: 20 - 25 Mm Thickness Of Blade: 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 164 Menu Folder (a4 (297mm X 210 Mm) And A5 (210 Mm X 148 Mm) Pc 5 518.00 2,590.00 165 Napkin Holder Rectangular Material: Stainless Steel With Highly Polished Appearance Dimension: Width: 70 - 90 Mm X Length: 150 - 170 Mm Thickness: 0.7 Mm -2 Mm Packed In Plastic Pouch Pc 6 247.00 1,482.00 166 Order Pads Rectangular Material: 80gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Pc 5 58.00 290.00 167 Pepper And Salt Mill: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Pc 20 1,380.00 27,600.00 168 Plate Covers Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Pc 8 305.00 2,440.00 169 Plate, Dessert, 7”to 8” Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color: White Inner Diameter: 145 To 165 Mm Thickness: 3 To 6 Mm Pc 24 207.00 4,968.00 170 Plate, Dinner, 10” Circular Material: Porcelain With No Design Color: White Inner Diameter: 200 Mm - 215 Mm Outer Diameter: 250 - 260 Mm Thickness: 3 Mm - 6 Mm Pc 24 437.00 10,488.00 171 Plate, Fish, 8” To 9” Circular Material: Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color: White Inner Diameter: 165 Mm - 190 Mm(minimum) Thickness: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 172 Round Table (8's) (54” Or 60”) Pc 10 9,034.00 90,340.00 173 Salad Forks (6” Long) Pc 24 127.00 3,048.00 174 Salad Knife 8” Pc 24 207.00 4,968.00 175 Salad Plates 7” To 8” Pc 24 242.00 5,808.00 176 Salt And Pepper Shakers Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Pc 4 207.00 828.00 177 Sauce Ladles Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Pc 10 403.00 4,030.00 178 Server, Cake Stainless Steel Blade, Highly Polished Appearance 2. Over-all Length: 220 To 270 Mm 3. Width: 60 - 80 Mm 4. Thickness: 1.5 Mm To 2 Mm 5. Handle: 120 -140 Mm Long, Non-toxic Plastic 6. Shape: Shovel-shaped 7. Color: Silver Pc 10 571.00 5,710.00 179 Service Forks : Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Pc 6 207.00 1,242.00 180 Service Tray: Rectangular Material: Plastic (pp) Size: 14 Inches X 18 Inches X 1 Inch (minimum) Colo: Any Pc 6 518.00 3,108.00 181 Show/service/ Base Plates 11” To 14” Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Set 6 1,208.00 7,248.00 182 Side Plates Or Bread Plates 6” Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness: 3 Mm - 6mm Pc 24 242.00 5,808.00 183 Side Towels Rectangular Material: Oxford Polyester Soft Cloth Over-all Length: 640 - 680 Mm Over-all Width: 420 -460 Mm Color: Plain White Pc 10 349.00 3,490.00 184 Silver Platter Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Pc 10 570.00 5,700.00 185 Soup Bowl Circular Material: Porcelain Capacity: 24 Oz. (minimum) Pc 24 437.00 10,488.00 186 Soup Ladle Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Pc 10 366.00 3,660.00 187 Soup Tureen Round Material: Stainless Steel Capacity: 7 - 11 Quart Size: 60 X 35 X 32 Cm (minimum) Pc 10 695.00 6,950.00 188 Spoon, Dessert Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length: 175 To 190 Mm Thickness: 2 Mm - 3 Mm Shorter Handle: 120 -130 Mm Color: Silver Pc 24 125.00 3,000.00 189 Spoons, Service Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Pc 6 136.00 816.00 190 Spoons, Soup (cream And Consume) Round Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length: 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Pc 24 160.00 3,840.00 191 Steak Knife (5”) Pc 24 251.00 6,024.00 192 Sugar Container Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Pc 10 288.00 2,880.00 193 Tablecloth, 54 X 54 Inches Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 942.00 9,420.00 194 Tablecloth, 64x64 Inches Rectangular Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 1,208.00 12,080.00 195 Table Napkins, Cloth, 16” X 16” Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Color: Plain White Pc 60 424.00 25,440.00 196 Table Skirting Cloth Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch Pc 10 2,185.00 21,850.00 197 Table, Square/rectangular (4's Or 6's) Square/rectangle Materia: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Pc 4 5,382.00 21,528.00 198 Tea Pot, 2 Pints Porcelain Type Body Shape: Round With Handle And Pouring Spout Material: Porcelain Capacity: (2 Pint) Color: White Pc 10 1,139.00 11,390.00 199 Teaspoon Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Pc 24 92.00 2,208.00 200 Tong, 8 Inches Standard Material: Stainless Steel Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 7 291.00 2,037.00 201 Tooth Pick Holder Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch Pc 10 101.00 1,010.00 202 Tray Stand Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Pc 5 2,282.00 11,410.00 203 Tray, Bill Folders/ Change Height: 190 - 220 Mm 3. Width: 120 -140 Mm 4. Thickness: 2 Mm To 3 Mm (minimum) 5. Color: Black Pc 5 271.00 1,355.00 204 Tray, Round (bar) Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Pc 8 443.00 3,544.00 205 Water Goblet Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Pc 24 124.00 2,976.00 206 Water Pitcher Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Pc 10 516.00 5,160.00 Sub Total 571,245.00 Total Amount 2,336,280.00 2. The Department Of Education, Schools Division Of Ilocos Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days. Bidders Must Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criteria As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Deped, Schools Division Of Ilocos Sur, And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. Until 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22-december 10, 2024 (until 9:00 A.m.) From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb Amounting To Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Deped, Schools Division Of Ilocos Sur Will Hold A Pre-bid Conference On November 29, 2024, At 10:00 A.m. At The Schools Division Office, Bantay, Ilocos Sur, And/or Through Videoconferencing/webcasting Via Google Meet Using The Link: Https://meet.google.com/tjb-zntu-yys Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 12, 2024, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 12, 2024, At 9:01 A.m. At The Given Address Below And/or Through And/or Virtual. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Deped, Schools Division Of Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Before Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marillac D. Quinsaat Head – Bac Secretariat Department Of Education, Schools Division Of Ilocos Sur Zone V, Bantay, Ilocos Sur, 2727 Email Address: Ilocos.sur@deped.gov.ph 12. You May Visit The Website/s: For Downloading Of Bidding Documents: Depedilocossur.info Date Of Issue: November 22, 2024 Joye D. Madalipay, Ceso Vi Chairperson, Bids And Awards Committee

Details: Description Invitation To Bid For Early Procurement Activity (cy 2025) For The Supply And Delivery Of Various Medical / Surgical Supplies Through Framework Agreement 1. The Gov. Celestino Gallares Memorial Medical Center, Using A Single-year For A Duration Of One (1) Year Framework Agreement, Through The Nep 2025 And Hospital Income Intends To Apply The Sum Of One Hundred Seventy Nine Million Ninety Three Thousand Nine Hundred Thirty Eight Pesos (php179,093,938.00) Being The Abc To Payments Under The Contract For Ib No. 2024-11-042. Bids Received In Excess Of The Total Cost Per Line Items Shall Be Automatically Rejected. 2. The Gov. Celestino Gallares Memorial Medical Center Now Invites Bids For Above Procurement Project. Delivery Of The Goods Is Required Within Ten (10) Calendar Days After Issuance Of A Call-off Or Any Date As Determined By The Pe. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmmc Bids And Awards Committee (bac) Office Through Electronic Mail Via Gcgmmc.bacmedsurglabsupplies@gmail.com Or Telephone Call At (038) 411-4868 To 69 Local 286 And Inspect The Bidding Documents At The Address Given Below During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders On November 18, 2024-december 10, 2024 From Gcgmmc Google Drive (gcgmmc.bacmedsurglabsupplies@gmail.com) And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Fifty Thousand Pesos Only (php 50,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Cash At The Gcgmmc Cashier Section Or Bank Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcgmmc General Fund Account Number: General Fund Account No. 00-0-00001-780-3 For Bidders Paying Thru Online Transfer Or Bank Deposits, A Successful Transaction/payment Must Be Sent To The Bac’s Official Email Address. Acknowledgement Receipt Will Be Issued In Lieu Of The Official Receipt (coa Circular No. 2021-014 Clause 5.2) As Proof That Payment Is Verified, Confirmed And Received By Gcgmmc. Only Upon The Issuance Of The Acknowledgement Receipt Shall The Bidder Be Granted Access To The Bac Google Drive. 6. The Gov. Celestino Gallares Memorial Medical Center Will Hold A Pre-bid Conference On November 26, 2024 @ 1:00 Pm At Cloud Lounge, 5/f, 555 Building, 0053 Miguel Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 10, 2024 @ 8:59am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 10, 2024 @ 9:00am At The Gcgmmc Hospital Library And Training Hall, 5/f 555 Building, 0053 Miguel Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. No Further Instructions. 11. The Gov. Celestino Gallares Memorial Medical Center Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Magnolia Marie B. Tiempo Bac Secretariat Bids And Awards Committee (bac) Office Gov. Celestino Gallares Memorial Medical Center 0053, M. Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol Email: Gcgmmc.bacmedsurglabsupplies@gmail.com Tel. No.: (038) 411-4868 To 69 Local 286 Cel. No.: +63 9171469712 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website Http://www.philgeps.gov.ph Gcgmmc Website Https://www.gcgmh.gov.ph Approved: Flor Annabelle B. Cesar, Rn, Man (sgd) Bac Chairperson (medical/surgical/laboratory Supplies) Noted: Miguelito S. Jayoma, Md, Fpcs, Fpsgs, Mhm (sgd) Medical Center Chief Ii Head Of Procuring Entity (hope) *_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_ S/n Stock / Property No. Unit Item Qty Unit Cost Total Cost Anesthesia Supplies 1 0004 Pc Anesthesia Breathing Circuit, Adult 450 1,000.00 450,000.00 2 0006 Pc Anesthesia Breathing Circuit, Pedia 5 1,000.00 5,000.00 3 0005 Pc Anesthesia Breathing Circuit, Neonate 5 1,000.00 5,000.00 4 0693 Pc Anesthesia Vent Mask Adult Large Size 5 5 500.00 2,500.00 5 0694 Pc Anesthesia Vent Mask Adult Medium Size 5 5 500.00 2,500.00 6 0695 Pc Anesthesia Vent Mask Adult Small 5 500.00 2,500.00 7 0696 Pc Anesthesia Vent Mask Child Size 4 5 500.00 2,500.00 8 0697 Pc Anesthesia Vent Mask Infant Size 3 5 500.00 2,500.00 9 0698 Pc Anesthesia Vent Mask Neonate Size 2 5 500.00 2,500.00 10 0699 Pc Anesthesia Vent Mask Toddler Size 1 5 650.00 3,250.00 11 1223 Pc Arterial Line Transducer Compatible With Ge Cardiac Monitor 5 2,000.00 10,000.00 12 1220 Pc Bp Cuff Adult With Inflation Bag Compatible For Ge Cardiac Monitor 2 1,000.00 2,000.00 13 1221 Pc Bp Cuff Pedia With Inflation Bag Compatible For Ge Cardiac Monitor 2 1,000.00 2,000.00 14 0040 Pc Carbon Dioxide Absorber 6 10,000.00 60,000.00 15 Pc Spinal Needle G. 25 3,500 200.00 700,000.00 16 0035 Pc Disposable Anesthesia Gas Sampling Line, Male/male Luer 3m/10ft, Material Pvc/peid 1.2, 10’s 1 10,000.00 5,000.00 17 1211 Pc Disposable Pulse Oximeter Probe Adult Compatible With Ge Cardiac Monitor 2 1,000.00 2,000.00 18 1222 Donut Pillow For Head Stabilization 2 1,000.00 2,000.00 19 0775 Pc End-tidal Co2 Nasal Cannula Sampling Line Compatible With Ge Machine 2 3,500.00 7,000.00 20 0333 Pc Epidural Set 300 1,500.00 450,000.00 21 1209 Pc Jackson Rees Circuit 0.5l With Apl Valve 5 3,000.00 15,000.00 22 0790 Pc Nasal Airway Size 6 2 500.00 1,000.00 23 0791 Pc Nasal Airway Size 7 2 500.00 1,000.00 24 1210 Pc Nebulization Kit Compatible With Breathing Circuit For Anesthesia Machine 5 500.00 2,500.00 25 0632 Pc Pressure Infuser Inflatable With Bulb And Regulator 5 2,000.00 10,000.00 26 1212 Pc Supraglottic Airway Supreme With Gastric Port Size 1 2 5,000.00 10,000.00 27 1213 Pc Supraglottic Airway Supreme With Gastric Port Size 1.5 2 5,000.00 10,000.00 28 1214 Pc Supraglottic Airway Supreme With Gastric Port Size 2 2 5,000.00 10,000.00 29 1215 Pc Supraglottic Airway Supreme With Gastric Port Size 2.5 2 5,000.00 10,000.00 30 0657 Pc Supraglottic Airway Supreme With Gastric Port Size 3 2 5,000.00 10,000.00 31 0658 Pc Supraglottic Airway Supreme With Gastric Port Size 4 2 5,000.00 10,000.00 32 0659 Pc Supraglottic Airway Supreme With Gastric Port Size 5 2 5,000.00 10,000.00 33 1216 Tube Endotracheal Double Lumen Size 35 Left 5 7,000.00 35,000.00 34 0827 Pc Tube Endotracheal Double Lumen Size 37 Left 5 7,000.00 35,000.00 35 0300 Pc Tube Endotracheal Introducer Atraumatic Round Tipped With Markings Fr. 14-15 5 400.00 2,000.00 36 1218 Pc Tube Endotracheal Introducer Bougie Curved Fr. 10 5 1,500.00 7,500.00 37 1219 Pc Tube Endotracheal Introducer Bougie Curved Fr. 14 5 1,500.00 7,500.00 38 1196 Pc Tube Endotracheal Reinforced/armored Size 3.0 5 1,200.00 6,000.00 39 1197 Pc Tube Endotracheal Reinforced/armored Size 3.5 5 1,200.00 6,000.00 40 1198 Pc Tube Endotracheal Reinforced/armored Size 4.0 5 1,200.00 6,000.00 41 1199 Pc Tube Endotracheal Reinforced/armored Size 4.5 5 1,200.00 6,000.00 42 1200 Pc Tube Endotracheal Reinforced/armored Size 5.0 5 1,200.00 6,000.00 43 1201 Pc Tube Endotracheal Reinforced/armored Size 5.5 5 1,200.00 6,000.00 44 1202 Pc Tube Endotracheal Preformed South Size 3.0 5 400.00 2,000.00 45 1203 Pc Tube Endotracheal Preformed South Size 3.5 5 400.00 2,000.00 46 1204 Pc Tube Endotracheal Preformed South Size 4.0 5 400.00 2,000.00 47 1205 Pc Tube Endotracheal Preformed South Size 4.5 5 400.00 2,000.00 48 1206 Pc Tube Endotracheal Preformed North Size 6.5 5 400.00 2,000.00 49 1207 Pc Tube Endotracheal Preformed North Size 7.0 5 400.00 2,000.00 50 1208 Pc Tube Endotracheal Preformed North Size 7.5 5 400.00 2,000.00 51 0452 Pc Ug Peripheral Nerve Block 5 6,000.00 30,000.00 52 1195 Pc Ultrasound Probe Sterile Condom Cover 5 50.00 250.00 Sub-total 1,985,000.00 Geriatric 53 1117 Box Adhesive Silicone Hydrofiber Foam Dressing With Ionic Silver Size 12.5x12.5cm, 10's 10 9,500.00 95,000.00 54 1106 Box Dressing Adhesive Hydrofiber Foam 12.5 X 12.5cm, 10's 10 5,000.00 50,000.00 55 0520 Box Dressing Hydrocolloid Controlled Gel Formula 10x10cm, 10's 100 1,500.00 150,000.00 56 0098 Box Dressing Hydrocolloid Extra Thin 10x10cm, 10's 250 1,600.00 400,000.00 57 1105 Box Dressing Non-adhesive Hydrofiber Foam 10cm X 10cm, 10's 10 3,500.00 35,000.00 58 1107 Box Dressing Non-adhesive Hydrofiber Foam Dressing Size 8"x8"(20cmx20cm), 5's 20 6,000.00 120,000.00 59 1108 Box Dressing Adhesive Hydrofiber Foam 21x21cm, 5's 20 7,000.00 140,000.00 60 1115 Box Enhanced Hydrofiber Dressing With Ionic Silver And Strengthening Fibre With Antibiofilm Size 2x45cm Rope, 5's 20 9,500.00 190,000.00 61 1116 Box Enhanced Hydrofiber Dressing With Ionic Silver And Strengthening Fibre With Antibiofilm Size 2x45 Cm Rope, 5's 20 4,500.00 90,000.00 62 1109 Box Latex Safe Tubular Bandage For Fingers, Toes (approximate Circumference 3"-8"), 10yds 10 900.00 9,000.00 63 1110 Box Latex Safe Tubular Bandage For Fingers, Wrist Small Hand (approximate Circumference 8-11"), 10yds 9m 10 1,000.00 10,000.00 64 1111 Box Latex Safe Tubular Bandage For Hand,elbow, Foot (approximate Circumference 11-16"), 10yds 9m 10 1,100.00 11,000.00 65 1112 Box Latex Safe Tubular Bandage For Hand,elbow, Foot & Knee (approximate Circumference 11-16"), 10yds 9m 10 1,100.00 11,000.00 66 1113 Box Latex Safe Tubular Bandage For Small Chest And Axilla (approximate Circumference 26-25"), 10yds 9m 10 1,600.00 16,000.00 67 1114 Box Latex Safe Tubular Bandage For Chest, Axilla & Abdomen (approxiamate Circumference 52-58"), 10yds 9m 10 3,300.00 33,000.00 Sub-total 1,360,000.00 Intravenous Supplies 68 0204 Pc 0.9% Sodium Chloride In 10ml Syringe, Sterile 4,500 60.00 270,000.00 69 0202 Pc 0.9% Sodium Chloride In 03ml Syringe, Sterile 9,000 60.00 540,000.00 70 0203 Pc 0.9% Sodium Chloride In 05ml Syringe, Sterile 4,500 60.00 270,000.00 71 0320 Pc Blood Transfusion Set 210u Filter, Double Chamber, Airvent Slip Type Gravity 3,000 100.00 300,000.00 72 0314 Pc Intravenous Catheter G. 18 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,500 80.00 760,000.00 73 0315 Pc Intravenous Catheter G. 20 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,000 80.00 720,000.00 74 0316 Pc Intravenous Catheter G. 22 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,500 80.00 760,000.00 75 0417 Pc Intravenous Catheter G. 24 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 6,000 80.00 480,000.00 76 0317 Pc Intravenous Catheter G. 26 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 6,000 80.00 480,000.00 77 0152 Pc Iv Splint Neonate 300 70.00 21,000.00 78 0153 Pc Iv Starter Kit: 1-pc 70% Isopropyl Alcohol Swab 1-pc Latex-free, Polyisoprene Synthetic Blue Rubber Tourniquet 1-pc Sterile Transparent Dressing 1-pc Intravenous Site Label 1-roll Easy-to-tear Hypoallergenic Plaster 2-pcs 2x2 Inches Sterile Gauze 1-pc Film Dressing Note: Sterility And Product Expiry Should Be Clearly Stated On The Label 15,000 160.00 2,400,000.00 79 0730 Pc Iv Wrist Support Adult Large 3,000 70.00 210,000.00 80 0154 Pc Iv Wrist Support, Adult-medium 900 70.00 63,000.00 81 0346 Pc Iv Wrist Support, Adult-small 900 70.00 63,000.00 82 0155 Pc Iv Wrist Support, Pedia-meduim 900 70.00 63,000.00 83 0319 Pc Microset 4,000 150.00 600,000.00 84 1065 Pc Platelet Set 500 100.00 50,000.00 85 0185 Pc Needle-free Port Adaptor Straight Fluid 10,500 60.00 630,000.00 86 0243 Pc Stopcock 3-way Disposable With Extension Tubing 4,000 150.00 600,000.00 87 0426 Pc Tube Extension Octopus Triple Lumen, At Least 10cm Length With Needle-free Connector 1,500 500.00 750,000.00 88 0341 Pc Tube Extension Set Double Lumen (2-way), 15cm Macrob Ore With Luer Lock Needle-free Split Septum Adapter With Sliding Clamp Latex-free 1,500 300.00 450,000.00 89 0290 Pc Tube Extension For Syringe Pump 105cm 2,000 250.00 500,000.00 90 0286 Pc Tube Extension For Syringe Pump 75cm 500 250.00 125,000.00 91 0318 Pc Vented Macro Gravity Administration Set With Anti-run Dry And Auto Prime Mechanism With Needle Free Access Y-site Port With Pinch Clamp 10,500 200.00 2,100,000.00 92 0420 Pc Volumetric Set 60 Drip/ml Burette Volume 100-120ml Gravity Type With Air Vent Needle 240cm Length Dehp Free Tubing Material Luer Lock 11,000 200.00 2,200,000.00 Sub-total 15,405,000.00 Neurosurgery Supplies 93 0471 Pc Bipolar Forceps, Adjustable Dissecting Force, Non-stick Bayonet 19cm With Solid Silver Tip 0.7mm, Disposable 5 75,000.00 375,000.00 94 0472 Pc Bipolar Forceps, Adjustable Dissecting Force, Non-stick Bayonet 19cm With Solid Silver Tip 1.0mm, Disposable 5 75,000.00 375,000.00 95 0473 Pc Bipolar Forceps, Irrigation Bayonet 22cm With Solid Silver Tip 0.7mm, Disposable 2 75,000.00 150,000.00 96 0474 Pc Bipolar Forceps, Irrigation Bayonet 22cm With Solid Silver Tip 1.0mm, Disposable 2 75,000.00 150,000.00 End-users Agreement 1. Delivery Timeframe: Items Must Be Delivered Within 10 Days Of The Order Placement To Ensure Timely Receipt By The End-user. 2. Defective Item Replacement: In The Event Of Reported Defective Items, The Supplier Is Responsible For Promptly Replacing Them To Ensure Safety And Quality. 3. Product Expiration Exchange: The Institution Must Be Permitted To Exchange Products Approaching Expiration, Up To A Minimum Of 3 Months Before The Expiry Date, To Maintain Product Quality And Effectiveness With No Validity Period, Allowing The Institution To Maintain Optimal Inventory Quality. 4. Guarantee Letter: A Guarantee Letter Supporting The End-user Requirements Specified In Points 2 And 3 Must Be Provided, Ensuring Accountability And Assurance From The Supplier. 5. Certificate Of Compliance: A Certificate Of Product Registration (cpr)/certificate Of Renewal/certificate Of Medical Device Notification (cmdn) Must Be Included, Validating The Product's Compliance With Regulatory Standards. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 7. Supplier Evaluation Requirement: The Supplier Must Have Achieved A Minimum Csr Supplier Evaluation Score Of 4 (very Satisfactory) Or Higher For The Period Of January To June 2024 To Be Considered For Contract Award. 8. New Items Requirement: All Delivered Items Must Be Brand New And Not Reprocessed. Sub-total 1,050,000.00 Respiratory Therapy Unit 97 Pc Air Filter Compatible With Fisher & Paykel Airvo Model 30 3,500.00 105,000.00 98 0009 Pc Bacterial/viral Filter Compatible With Mechanical Ventilator 900 250.00 225,000.00 99 Pc Full Face Mask For Bpap, Vented, Large 10 8,000.00 80,000.00 100 Pc Full Face Mask For Bpap, Vented, Medium 10 8,000.00 80,000.00 101 Pc Full Face Mask For Bpap, Vented, Small 10 8,000.00 80,000.00 102 1169 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Xs 15 7,000.00 105,000.00 103 1168 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Small 30 7,000.00 210,000.00 104 1167 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Medium 60 7,000.00 420,000.00 105 1166 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Large 15 7,000.00 105,000.00 106 0441 Pc Heated Moisture Exchange Filter With Luer Lock Port And Super Catheter Mount And Elbow 300 300.00 90,000.00 107 0036 Kit High Flow Nasal Cannula Adult-large Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 108 0037 Kit High Flow Nasal Cannula Adult-medium Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 109 0476 Kit High Flow Nasal Cannula Adult-small Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 110 Pc High Flow Nasal Cannula For Neonate, Nippv, Xxs 50 500.00 25,000.00 111 Pc High Flow Nasal Cannula For Neonate, Nippv, Xs 50 500.00 25,000.00 112 Pc High Flow Nasal Cannula For Neonate, Nippv, Small 50 500.00 25,000.00 113 Pc High Flow Nasal Cannula For Neonate, Nippv, Medium 50 500.00 25,000.00 114 Pc High Flow Nasal Cannula For Neonate, Nippv, Larg 50 500.00 25,000.00 115 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-large Compatible With Comed 50 7,000.00 350,000.00 116 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-medium Compatible With Comed 50 7,000.00 350,000.00 117 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-small Compatible With Comed 50 7,000.00 350,000.00 118 Pc Niv Face Mask Non-vented, Large 50 5,000.00 250,000.00 119 Pc Niv Face Mask Non-vented, Medium 50 5,000.00 250,000.00 120 Pc Niv Face Mask Non-vented, Small 50 5,000.00 250,000.00 121 Pc Tracheal Mask 150 150.00 22,500.00 122 0311 Set Tubing Ventilator Complete Set, Adult Contents: Adult Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 750 2,000.00 1,500,000.00 123 0312 Set Tubing Ventilator Complete Set, Neonate Contents: Neonate Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 150 2,000.00 300,000.00 124 0313 Set Tubing Ventilator Complete Set, Pedia Contents: Pedia Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 300 2,000.00 600,000.00 125 0713 Set Weaning Set For Ventilator Machine 60 1,000.00 60,000.00 Sub-total 6,717,500.00 Medical Gases 126 0170 Cyl Medical Grade Carbon Dioxide 6 7,000.00 42,000.00 127 0171 Cyl Medical Grade Compressed Air 60 700.00 42,000.00 128 0172 Cyl Medical Grade Oxygen Refill 31,200 700.00 21,840,000.00 129 0173 Cyl Medical Grade Oxygen Refill For Portable 3,000 700.00 2,100,000.00 End-users Agreement: 1. Delivery Timeframe: Items Must Be Delivered Within 10 Days Of The Order Placement To Ensure Timely Receipt By The End-user. 2. Defective Item Replacement: In The Event Of Reported Defective Items, The Supplier Is Responsible For Promptly Replacing Them To Ensure Safety And Quality. 3. Product Expiration Exchange: The Institution Must Be Permitted To Exchange Products Approaching Expiration, Up To A Minimum Of 3 Months Before The Expiry Date, To Maintain Product Quality And Effectiveness With No Validity Period, Allowing The Institution To Maintain Optimal Inventory Quality. 4. Guarantee Letter: A Guarantee Letter Supporting The End-user Requirements Specified In Points 2 And 3 Must Be Provided, Ensuring Accountability And Assurance From The Supplier. 5. Certificate Of Compliance: A Certificate Of Product Registration (cpr)/certificate Of Renewal/certificate Of Medical Device Notification (cmdn) Must Be Included, Validating The Product's Compliance With Regulatory Standards. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 7. Supplier Evaluation Requirement: The Supplier Must Have Achieved A Minimum Csr Supplier Evaluation Score Of 4 (very Satisfactory) Or Higher For The Period Of January To June 2024 To Be Considered For Contract Award. 8. New Items Requirement: All Delivered Items Must Be Brand New And Not Reprocessed. Sub-total 24,024,000.00 Reprocessing Unit For Medical Devices 130 0014 Amp Biological Indicator Compatible With Matachana High Temperature Machine 1,200 500.00 600,000.00 131 0013 Amp Biological Indicator Compatible With Ethylene Oxide (c2h4o) Machine 60 500.00 30,000.00 132 0015 Amp Biological Indicator Compatible With Matachana Plasma (h202) Machine 600 1,000.00 600,000.00 133 0022 Box Bowie And Dick Type Test Pack, 134 Degrees Celsius 3.5minutes, 20's 10 12,000.00 120,000.00 134 0477 Pack External Indicator Label Compatible With Aesculap Rigid Container 1000's/pack 6 20,000.00 120,000.00 135 0339 Box External Indicator Tape Compatible With Matachana Plasma (h202), 25cmx25m, 20 Rolls/box 6 34,000.00 204,000.00 136 0370 Roll External Indicator Tape For High Temperature Sterilizer 1 Inch 360 300.00 108,000.00 137 0420 Sack Industrial Salt 60 500.00 30,000.00 138 0151 Gal Instrument Detergent Enzymatic 5l 12 3,500.00 42,000.00 139 0153 Gal Instrument Disinfectant 0.55%-0.60% Orthophthaldehyde, 5l 12 2,000.00 24,000.00 140 0396 Bot Instrument Lubricant, Paraffin Liquid Of Pharmaceutical Grade, Non-ionic Surfactants 6 1,600.00 9,600.00 141 0155 Pack Internal Chemical Indicator Strip Class 5 For High Temperature Sterilization 50's 600 1,200.00 720,000.00 142 0589 Pack Internal Chemical Indicator Strip For Eo (c2h4o), 50's 6 500.00 3,000.00 143 0337 Pack Internal Chemical Indicator Strip For For Plasma (h202), 250's 3 30,000.00 90,000.00 144 0384 Roll Paper-plastic Peel Pouch 03” Flat 200m/roll 6 1,000.00 6,000.00 145 0385 Roll Paper-plastic Peel Pouch 04'' Flat, 200m/roll 6 1,000.00 6,000.00 146 0802 Roll Paper-plastic Peel Pouch 06'' Flat, 200m/roll 6 3,500.00 21,000.00 147 0386 Roll Paper-plastic Peel Pouch 08” Flat, 200meter/roll 6 3,500.00 21,000.00 148 0387 Roll Paper-plastic Peel Pouch 10” Flat, 200m/roll 6 4,000.00 24,000.00 149 0388 Roll Paper-plastic Peel Pouch 12” Flat, 200m/roll 6 4,000.00 24,000.00 150 0338 Box Pcd -helix + Chemical Strips For H2o2, 250 Units Per Box 2 75,000.00 150,000.00 151 0449 Gal Reagent Compatible With Matachana Washer Disinfector, Enzymatic Detergent 6 5,000.00 30,000.00 152 0447 Gal Reagent Compatible With Matachana Washer Disinfector, Maximum Ph Alkaline 6 5,000.00 30,000.00 153 0448 Gal Reagent Compatible With Matachana Washer Disinfector, Sequel Rinse Aid, Acid-free 6 5,000.00 30,000.00 154 0505 Pack Reusable Filter Compatible With Aesculap Rigid Container, 10's/pack 10 20,000.00 200,000.00 155 1084 Roll Reusable Filter Compatible With Aygon Rigid Container, 10's/pack 1 20,000.00 20,000.00 156 0369 Pc Sterilant Compatible With Ethylene Oxide (c2h4o) Machine 100 4,000.00 400,000.00 157 0336 Pc Sterilant Reagent Compatible With Matachana Plasma (h202) In Hdpe Container 100 30,000.00 3,000,000.00 158 0719 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 120x120cm 6,000 50.00 300,000.00 159 0244 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 45x45cm 6,000 30.00 180,000.00 160 0245 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 50x50cm 6,000 35.00 210,000.00 161 0246 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 60x60cm 6,000 40.00 240,000.00 162 0247 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 75x75cm 6,000 45.00 270,000.00 163 0684 Bx Tamper Proof Lock With Process Indicator For Steam Sterilization Compatible With Aesculap Rigid Containers, 1000’s 6 50,000.00 300,000.00 164 0723 Roll Thermal Paper For Compatible With Matachana Machine 60 X57.5 M 300 1,000.00 300,000.00 165 0340 Roll Tyvek Rolls 03", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change 6 3,000.00 18,000.00 166 0342 Roll Tyvek Rolls 06", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change 6 6,000.00 36,000.00 167 0343 Roll Tyvek Rolls 08", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 200mmx70m 6 10,000.00 60,000.00 168 0344 Roll Tyvek Rolls 10", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 200mmx70m 6 12,000.00 72,000.00 169 0345 Roll Tyvek Rolls 12", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 300mmx70m 6 17,000.00 102,000.00 170 0749 Roll Tyvek Rolls 16", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 500mmx70m 6 35,000.00 210,000.00 Sub-total 8,960,600.00 Orthopedic Surgery 171 0510 Roll Bandage Elastic 2inches X 5yards 900 50.00 45,000.00 172 0010 Roll Bandage Elastic 4inches X 5yards 3,000 50.00 150,000.00 173 0011 Roll Bandage Elastic 6inches X 5yards 3,000 50.00 150,000.00 174 1074 Roll Bandage Esmarch 4 Inches X 2.5meters 10 1,000.00 10,000.00 175 1075 Roll Bandage Esmarch 6 Inches X 2.5meters 10 1,000.00 10,000.00 176 1178 Roll Fibercast 4 Inches 100 500.00 50,000.00 177 1179 Roll Fibercast 6 Inches 100 500.00 50,000.00 178 0511 Roll Plaster Of Paris 4 X 5yd 900 50.00 45,000.00 179 0512 Roll Plaster Of Paris 6 X 5yd 900 50.00 45,000.00 180 1175 Pc Suture Anchors 2.9mm 20 2,500.00 50,000.00 181 1176 Pc Suture Anchors 5.0mm 20 2,500.00 50,000.00 182 1076 Pc Suture, Monofilament Polypropylene, 0, 40mm-mayo 2 Needle, 100cm 180 1,000.00 180,000.00 183 1077 Pc Suture, Monofilament Polypropylene, 4, 40mm-mayo 2 Needle, 100cm 180 1,000.00 180,000.00 184 1182 Pc Suture Wire Polyblend Braided With Needle 90 2,000.00 180,000.00 185 0012 Roll Wadding Sheet 4inches X 5yards 1,200 30.00 36,000.00 186 0451 Roll Wadding Sheet 6inches X 5yards 4,000 30.00 120,000.00 Sub-total 1,351,000.00 Operating Room 187 0001 Pc Abdominal Lap Sponge 12x12 With Loop, Sterile, Individually Packed 1,500 100.00 150,000.00 188 0016 Box Blade Surgical No. 10, 100's 50 100.00 5,000.00 189 0017 Box Blade Surgical No. 11, 100's 50 100.00 5,000.00 190 0514 Box Blade Surgical No. 12, 100's 1 100.00 100.00 191 0018 Box Blade Surgical No. 15, 100's 50 100.00 5,000.00 192 0019 Box Blade Surgical No. 20, 100's 50 100.00 5,000.00 193 0020 Box Blade Surgical No. 22, 100's 50 100.00 5,000.00 194 0021 Pc Bone Wax 300 300.00 90,000.00 195 0501 Pc Cadexomer Iodine 100% Containing 0.9% Iodine, 3grams 300 700.00 210,000.00 196 0033 Box Camera Cover, Plastic Sterile, 50's 1 35,000.00 35,000.00 197 0442 Pc Catheter Locking Solution 30% Pre-filled, 5ml 1,000 500.00 500,000.00 198 0068 Pc Catheter Vascular 12f X 20-26cm, Curved Duo Split Triple Lumen 500 3,500.00 1,750,000.00 199 0913 Pc Catheter Vascular 12f X 15-16cm, Curved Duo Split Triple Lumen 700 3,500.00 2,450,000.00 200 0078 Pc Cautery Electrosurgical Pencil Standard 70mm Blade, Button Switch 3,600 500.00 1,800,000.00 201 0076 Pc Cautery Pad With Solid Gel, Foam Support With At Least 300cm Non Detachable Cable Connector Compatible With Covidien Machine, Adult 3,000 500.00 1,500,000.00 202 0077 Pc Cautery Pad With Solid Gel, Foam Support With At Least 300cm Non Detachable Cable Connector Compatible With Covidien Machine, Neonate 10 600.00 6,000.00 203 0075 Pc Cautery Pads With Solid Gel, Foam Support, At Least 202x101mm With 300cm Non-detachable Cable Connector, Pedia 10 600.00 6,000.00 204 0144 Pc Hemostatic Gelatine Sponge 300 500.00 150,000.00 205 0145 Pc Hemostatic Oxidized Regenerated Cellulose 3 X 4” 300 2,500.00 750,000.00 206 0161 Pack Laparotomy Pack: (5) Surgical Gown Medium-large Size, (1) Mayo Stand Cover At Least 60x140cm, (1) Square Of Drape With Adhesive At Least 75x90cm, (1) Laparotomy Drape At Least 270x320x330cm, (1) Back Table Cover At Least 150x200cm, (5) Hand Towel At Least 40x40cm, Sterile 1,800 2,000.00 3,600,000.00 207 Pack Lithotomy Pack: (4) Surgical Gown Medium-large Size, (1) Mayo Stand Cover At Least 60x140cm, (2) Legging Peridrape (1) Baby Wrap Drape At Least 90x90cm, (1) Ob Drape Collection Pouch At Least 110x120cm, (1) Back Table Cover At Least 150x200cm, (5) Towel At Least At Least 40x40cm, Sterile 1,000 2,500.00 2,500,000.00 208 0162 Pc Ligating Clip Cartridge Medium-large 6 Clips In1 Cartridge With Applier 180 2,100.00 378,000.00 209 Pc Marker Dual Tip Ink Permanent Skin Marker 60 500.00 30,000.00 210 0164 Box Mask Face 3-ply Disposable Tie-on, 50's 900 500.00 450,000.00 211 0180 Pc Mesh Polypropylene 15cm X 15cm 60 2,500.00 150,000.00 212 0179 Pc Mesh Polypropylene 30-35cm X 30-35cm 6 3,000.00 18,000.00 213 0181 Pc Mesh Polypropylene 7.5cm X 15cm 60 2,500.00 150,000.00 214 0195 Pc Penrose Drain 1/2 X 18 50 300.00 15,000.00 215 0625 Pc Penrose Drain 1/4’ X 18 50 300.00 15,000.00 216 0196 Pc Penrose Drain 1” X 18 50 300.00 15,000.00 217 0211 Gal Povidone Antiseptic 10% 60 2,000.00 120,000.00 218 0212 Gal Povidone Cleanser 7.5% 60 2,000.00 120,000.00 219 0219 Pc Saw Gigli 15 1,500.00 22,500.00 220 0397 Pc Silicone Flat Drain System 150cc-200cc Reservoir 360 1,200.00 432,000.00 221 0228 Bot Skin Disinfectant: Propan-2-ol Benzalkonium Chloride, 1 Liter 600 2,000.00 1,200,000.00 222 0229 Bot Skin Disinfectant: Propan-2-ol Benzalkonium Chloride, 250ml 150 1,500.00 225,000.00 223 0231 Pc Skin Stapler, With Stapler Remover Every 50 Pcs 500 700.00 350,000.00 224 0234 Pc Stapler 3d Linear Cutter 75mm Reload 75 3,000.00 225,000.00 225 0235 Unit Stapler 3d Linear Cutter (55mm) 10 15,000.00 150,000.00 226 0236 Pc Stapler 3d Linear Cutter 55mm Reload 75 3,000.00 225,000.00 227 0254 Pc Suction Set Poole Drain With Yankeur Tip Suction Handle, With Thumb Control Vent 2,000 300.00 600,000.00 228 0282 Pc Suture, Chromic, 0 37mm 1/2c. Atraumatic 36 250.00 9,000.00 229 0839 Pc Suture, Chromic, 1-0 40mm 1/2c. Atraumatic 36 250.00 9,000.00 230 0283 Pc Suture, Chromic, 2-0 26mm 1/2c. Atraumatic 36 250.00 9,000.00 231 0284 Pc Suture, Chromic, 3-0 26mm 1/2c. Atraumatic 36 250.00 9,000.00 232 0819 Pc Suture, Chromic, 4-0 17mm 1/2c. Atraumatic 36 250.00 9,000.00 233 0286 Pc Suture, Chromic, 5-0 17mm 1/2c. Atraumatic 36 250.00 9,000.00 234 0846 Pc Suture, Endoscopic Loop Ligature, Polyglactin 0, 3.5m, 18" 45cm 36 500.00 18,000.00 235 0258 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 4-0, 19mm 3/8c. Atraumatic Size 72 600.00 43,200.00 236 0257 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 4-0, 19mm 3/8c. Cutting Size 36 600.00 21,600.00 237 0260 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 5-0, 13mm 3/8c. Atraumatic Size 72 600.00 43,200.00 238 0259 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 5-0, 13mm 3/8c. Cutting Size 36 600.00 21,600.00 239 0264 Pc Suture, Monofilament Absorbable Poly-4-hydroxybutrate, C.1/2, 37mm, 90cm Size 0 72 1,000.00 72,000.00 240 0265 Pc Suture, Monofilament Polyamide, 3-0, 19-24mm 3/8c., Cutting 648 300.00 194,400.00 241 0266 Pc Suture, Monofilament Polyamide, 4-0, 19-24mm 3/8c., Cutting 1,260 300.00 378,000.00 242 0267 Pc Suture, Monofilament Polyamide, 5-0, 11-13mm 3/8c., Reverse Cutting 1,044 300.00 313,200.00 243 0268 Pc Suture, Monofilament Polyamide, 6-0, 11-13mm 3/8c., Reverse Cutting 36 400.00 14,400.00 244 0946 Pc Suture, Polydiaxanone Monofilament Absorbable 0, 90cm With 36mm 720 600.00 432,000.00 245 0946 Pc Suture, Polydiaxanone Monofilament Absorbable 1, 90cm With 36mm 720 600.00 432,000.00 246 0948 Pc Suture, Monofilament Polyamide 6, Non-absorbable 4-0, 45cm, With Plastic Surgery Prime Needle 36 600.00 21,600.00 247 0949 Pc Suture, Monofilament Polyamide 6, Non-absorbable 6-0, 45cm, With 16mm Precision Cosmetic Needle 36 600.00 21,600.00 248 0950 Pc Suture, Monofilament Polyamide 6, Non-absorbable 5-0, 45cm, With 16mm Precision Cosmetic Needle 36 600.00 21,600.00 249 0951 Pc Suture, Monofilament Polyamide 6, Non-absorbable 4-0, 45cm, With 19mm For Skin 2 Needle 36 600.00 21,600.00 250 Suture, Monofilament Polyamide, Non-absorbable 9-0, 5.1mm, 3/8c., Atraumatic 36 700.00 25,200.00 251 0269 Pc Suture, Monofilament Polypropylene, 0, 40mm 1/2c., Atraumatic 360 600.00 216,000.00 252 0407 Pc Suture, Monofilament Polypropylene, 1, 40mm 1/2c., Atraumatic 36 600.00 21,600.00 253 0270 Pc Suture, Monofilament Polypropylene, 2-0, 31mm 1/2c., Atraumatic 1,080 600.00 648,000.00 254 0271 Pc Suture, Monofilament Polypropylene, 3-0, 17mm 1/2c., Atraumatic 1,332 600.00 799,200.00 255 0272 Pc Suture, Monofilament Polypropylene, 4-0, 17mm 1/2c., Atraumatic 720 600.00 432,000.00 256 0273 Pc Suture, Monofilament Polypropylene, 5-0, 13mm 1/2c., Atraumatic 36 1,000.00 36,000.00 257 0274 Pc Suture, Monofilament Polypropylene, 6-0, 9mm 1/2c., Atraumatic 144 1,000.00 144,000.00 258 0275 Pc Suture, Monofilament Polypropylene, 7-0, 9-10mm 3/8c., Atraumatic Double Arm 36 1,500.00 54,000.00 259 0820 Pc Suture, Parynchyma Set (poly-glycolic Acid Tape) 36 1,000.00 36,000.00 260 0276 Pc Suture, Silk 0 Strand 972 200.00 194,400.00 261 0277 Pc Suture, Silk 2-0 Strand 1,368 200.00 273,600.00 262 0278 Pc Suture, Silk 3-0 Strand 1,368 200.00 273,600.00 263 0662 Pc Suture, Silk, 0, 40mm 1/2c., Atraumatic 360 200.00 72,000.00 264 0279 Pc Suture, Silk, 3-0, 22-26mm 1/2c., Atraumatic 1,800 200.00 360,000.00 265 0488 Pc Suture, Silk, 3-0, 22-26mm 1/2c., Cutting 612 300.00 183,600.00 266 0280 Pc Suture, Silk, 4-0, 22-26mm 1/2c., Atraumatic 360 400.00 144,000.00 267 0821 Pc Suture, Silk, 4-0, 22-26mm 1/2c., Cutting 36 400.00 14,400.00 268 0281 Pc Suture, Silk, 5-0, 17-22mm 3/8c., Atraumatic 36 500.00 18,000.00 269 0287 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 0, 36mm 1/2c. Atraumatic 7,200 400.00 2,880,000.00 270 0400 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 1, 40mm 1/2c. Atraumatic 7,200 400.00 2,880,000.00 271 0288 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 2-0, 37mm 1/2c. Atraumatic 6,012 400.00 2,404,800.00 272 0822 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 26mm 1/2c., Atraumatic 3,600 500.00 1,800,000.00 273 0289 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 26mm 1/2c., Cutting 1,800 500.00 900,000.00 274 0290 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 4-0, 22mm 1/2c., Atraumatic 1,296 600.00 777,600.00 275 0291 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 5-0, 17mm 3/8c., Atraumatic 180 600.00 108,000.00 276 0944 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 4-0, 75cm With 17mm Renal Bypass 1 Plus Needle 36 700.00 25,200.00 277 0945 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 70cm With 17mm Renal Bypass 36 700.00 25,200.00 278 0952 Pc Suture, Synthetic Absorbable Polyglactin, Braided 5-0, 75cm With 17mm Renal Bypass 1 Plus Needle 36 700.00 25,200.00 279 0954 Pc Suture, Synthetic Absorbable Polyglactin Braided With Triclosan 4-0, 70 Cm With 13mm Renal Bypass-2 Needle 36 700.00 25,200.00 280 0955 Pc Suture, Synthetic Monofilament Absorbable, Polyglecaprone 25, 4-0, 70cm With 19mm Plastic Surgery-2 Needle 36 700.00 25,200.00 281 0956 Pc Suture, Synthetic Monofilament Absorbable, Polyglecaprone 25, 5-0, 45cm With 13mm Plastic Surgery-3 Needle 36 700.00 25,200.00 282 0256 Pc Topical Skin Adhesive 360 800.00 288,000.00 283 0406 Pc Trocar Bladeless With Fixation Cannula 10-11mm 150 5,000.00 750,000.00 284 0405 Pc Trocar Bladeless With Fixation Cannula 5mm 60 5,000.00 300,000.00 285 0825 Pc T-tube Sterile Fr. 16 5 1,500.00 7,500.00 286 0826 Pc T-tube Sterile Fr. 18 5 1,500.00 7,500.00 287 0836 Pc Tube Nephrostomy Set Fr. 12 5 3,000.00 15,000.00 288 0837 Pc Tube Nephrostomy Set Fr. 14 5 3,000.00 15,000.00 289 0308 Pc Tube Tracheostomy With Inner Cannula No. 4.0, Fenestrated 2 6,000.00 12,000.00 290 0832 Pc Tube Tracheostomy With Inner Cannula No. 5.0, Fenestrated 2 6,000.00 12,000.00 291 0309 Pc Tube Tracheostomy With Inner Cannula No. 6.0, Fenestrated 5 6,000.00 30,000.00 292 0833 Pc Tube Tracheostomy With Inner Cannula No. 7.0, Fenestrated 25 6,000.00 150,000.00 293 0310 Pc Tube Tracheostomy With Inner Cannula No. 8.0, Fenestrated 50 6,000.00 300,000.00 294 0687 Pc Ultrasonic Shear 17cm Length 1 50,000.00 50,000.00 295 0688 Pc Ultrasonic Shear 9cm Length 1 50,000.00 50,000.00 296 1127 Pc Ultrasonic Laparoscopic Shears With Adaptive Tissue Technology And Advance Hemostasis Mode Curved Tip 36cm 6 52,000.00 312,000.00 297 0364 Pack Uterine Pack, X-ray Detectable, 12-16ply, 10’s 1,500 500.00 750,000.00 298 0838 Pc Ureteral Stent, Standard Double J, Fr.5- 6 24cm 3 5,000.00 15,000.00 Sub-total 41,447,800.00 Ophthalmology Supplies Pc Foldable Intra-ocular Aspheric Lens 150 1,600.00 240,000.00 300 1087 Pc Ophthalmic Viscosurgical Device Sodium Hyaluronate 1.8% 1.5ml 200 1,100.00 220,000.00 301 1088 Pc Ophthalmic Viscosurgical Device Hydroxypropylmethylcellulose 2.0%, 2.0ml 200 1,500.00 300,000.00 302 0839 Pc 15 Degree Ophthalmic Stab Knife 200 4,000.00 800,000.00 303 1086 Pc 2.2mm Slit Angled Ophthalmic Knife 200 5,000.00 1,000,000.00 304 0841 Pc 2.3mm Crescent Ophthalmic Knife Bevel Up 100 5,000.00 500,000.00 305 0840 Pc 2.75mm Slit Angled Ophthalmic Knife 200 5,000.00 1,000,000.00 306 0842 Pc 23g Mvr Lance Ophthalmic Knife 100 5,000.00 500,000.00 307 0849 Box Needle Disposable Im G. 30 1/2” Preferrably With Safety Features 100’s 10 1,000.00 10,000.00 308 0835 Box Suture, Nylon 10-0 Suture Double-armed, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 5.5mm, Needle Curvature: 7/16” 158°, Needle Diameter: 0.14mm, Box Of 12 Sutures 10 15,000.00 150,000.00 309 0837 Box Suture, Polyglycolic Acid Absorbable 6-0 Suture, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 6.5mm, Needle Curvature: 3/8” 135°, Needle Diameter: 0.20mm 2 15,000.00 30,000.00 310 0838 Box Suture, Polyglycolic Acid Absorbable 7-0 Suture, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 6.5mm, Needle Curvature: 3/8” 135°, Needle Diameter: 0.20mm 10 15,000.00 150,000.00 311 0836 Box Suture, Polypropylene Monofilament 10-0 Suture Double-armed, Suture Length: 20cm, Needle Shape: Spatula, Needle Length: 16.0mm, Needle Curvature: Straight, Needle Diameter: 0.20mm 2 15,000.00 30,000.00 Sub-total 4,930,000.00 Various Medical Supplies 312 0480 Box Adhesive Bandage, 100's/box 90 100.00 9,000.00 313 0002 Bot Alcohol 70% Isoprophyl, 500ml 3,000 75.00 225,000.00 314 0003 Box Alcohol Prep Pad 70% Isoprophyl, 100's 3,000 75.00 225,000.00 315 0007 Pc Arm Sling, Adult 300 100.00 30,000.00 316 0008 Pc Arm Sling, Pedia 150 100.00 15,000.00 317 0509 Pc Bacterial Filter For Suction Machine Compatible With Medela 90 2,000.00 180,000.00 318 0513 Roll Bandage Roller 4inches X 5yards 30 50.00 1,500.00 319 0758 Set Bp Cuff Adult With Inflation Bag 250 300.00 75,000.00 320 0024 Set Bp Cuff Neonate With Inflation Bag 5 500.00 2,500.00 321 0025 Set Bp Cuff Pedia With Inflation Bag 38 400.00 15,000.00 322 0026 Set Bp Cuff Small Child With Inflation Bag 25 350.00 8,750.00 323 0031 Pc Bp Rubber Pump With Airflow Control 60 250.00 15,000.00 324 0032 Pc Cadaver Bag Adult 8 Feet 600 750.00 450,000.00 325 0032 Pc Cadaver Bag Pedia 3 Feet 50 500.00 25,000.00 326 0365 Pc Cannula For Oxygen Nasal Prong - Adult 4,500 50.00 225,000.00 327 0358 Pc Cannula For Oxygen Nasal Prong - Neonate 650 50.00 32,500.00 328 0366 Pc Cannula For Oxygen Nasal Prong - Pedia 750 50.00 37,500.00 329 0042 Pc Catheter Foley Bag 2way Fr. 08 With Needle-free Port 5 50.00 250.00 330 0043 Pc Catheter Foley Bag 2way Fr. 10 With Needle-free Port 100 50.00 5,000.00 331 0044 Pc Catheter Foley Bag 2way Fr. 12 With Needle-free Port 30 50.00 1,500.00 332 0045 Pc Catheter Foley Bag 2way Fr. 14 With Needle-free Port 150 50.00 7,500.00 333 0046 Pc Catheter Foley Bag 2way Fr. 16 With Needle-free Port 3,000 50.00 150,000.00 334 0526 Pc Catheter Foley Bag 2way Fr. 18 With Needle-free Port 30 50.00 1,500.00 335 0460 Pc Catheter Foley Bag 2way Fr. 20 With Needle-free Port 90 50.00 4,500.00 336 0461 Pc Catheter Foley Bag 2way Fr. 22 With Needle-free Port 60 100.00 6,000.00 337 0047 Pc Catheter Foley Bag 3way Fr. 18 With Needle-free Port 30 100.00 3,000.00 338 0048 Pc Catheter Foley Bag 3way Fr. 20 With Needle-free Port 30 100.00 3,000.00 339 0049 Pc Catheter Foley Bag 3way Fr. 22 With Needle-free Port 30 100.00 3,000.00 340 0050 Pc Catheter Foley Bag 3way Fr. 24 With Needle-free Port 30 100.00 3,000.00 341 0051 Pc Catheter Mushroom Fr. 28 15 300.00 4,500.00 342 0052 Pc Catheter Mushroom Fr. 32 15 300.00 4,500.00 343 0367 Pc Catheter Suction Fr. 05 1,500 15.00 22,500.00 344 0054 Pc Catheter Suction Fr. 08 3,000 15.00 45,000.00 345 0055 Pc Catheter Suction Fr. 10 3,000 15.00 45,000.00 346 0368 Pc Catheter Suction Fr. 12 3,000 15.00 45,000.00 347 0056 Pc Catheter Suction Fr. 14 10,500 10.00 105,000.00 348 0057 Pc Catheter Suction Fr. 16 10,500 10.00 105,000.00 349 0058 Pc Catheter Thoracic Fr. 24 15 350.00 5,250.00 350 0059 Pc Catheter Thoracic Fr. 28 15 350.00 5,250.00 351 0060 Pc Catheter Thoracic Fr. 32 30 350.00 10,500.00 352 0061 Pc Catheter Thoracic Fr. 36 30 350.00 10,500.00 353 1049 Pc Cervical Brush 30 20.00 600.00 354 0813 Box Skin Wipe With 2% Chlorhexidine In 70% Alcohol Individual Wrapped Wipe For Cleaning And Disinfection Of Skin 200pcs/box 150 900.00 135,000.00 355 0083 Pc Cohesive Conforming Bandage 04x4cm 150 150.00 22,500.00 356 0082 Pc Cohesive Conforming Bandage 06x4cm 300 175.00 52,500.00 357 0081 Pc Cohesive Conforming Bandage 08x4cm 300 200.00 60,000.00 358 0354 Pc Cohesive Conforming Bandage 10x4cm 150 250.00 37,500.00 359 0080 Pc Cohesive Conforming Bandage 12x4cm 150 275.00 41,250.00 360 0084 Pc Collecting Bottle For Sputum (clear) With Polyethylene Screw Cap With Label 3,600 10.00 36,000.00 361 0085 Pc Collecting Bottle For Urine/stool With Preferably Red Polyethylene Screw Cap With Label 15,000 10.00 150,000.00 362 0462 Pc Colostomy Drainable Pouch 38-45mm 15 100.00 1,500.00 363 0086 Pc Colostomy Drainable Pouch 50-57mm 15 100.00 1,500.00 364 0087 Pc Colostomy Drainable Pouch 70mm 15 100.00 1,500.00 365 0088 Pc Colostomy Starter Kit 40-45mm 225 450.00 101,250.00 366 0089 Pc Colostomy Starter Kit 50-57mm 400 450.00 180,000.00 367 0090 Pc Colostomy Starter Kit 70mm 250 450.00 112,500.00 368 0091 Pc Colostomy Stomahesive Wafer 40-45mm 15 250.00 3,750.00 369 0092 Pc Colostomy Stomahesive Wafer 50-57mm 152 250.00 37,875.00 370 0093 Pc Colostomy Stomahesive Wafer 70mm 2 250.00 375.00 371 0094 Pack Cord Clamp 100’s 30 300.00 9,000.00 372 0392 Pack Cotton Balls 300's 500 100.00 50,000.00 373 0542 Pack Cotton Balls, Sterile 3's 500 50.00 25,000.00 374 0095 Pack Cotton Tipped Applicator Individually Packed Sterile 100’s 300 100.00 30,000.00 375 0097 Pad Decontaminating Mat, 30sheets Per Pad 90 2,000.00 180,000.00 376 0770 Pc Dressing Film Dressing With Non-adherent Pad 10cmx12cm 150 100.00 15,000.00 377 0547 Pc Dressing Film Dressing With Non-adherent Pad 5cmx7cm 50 100.00 5,000.00 378 0393 Pc Dressing Film Dressing With Non-adherent Pad 6cmx10cm 50 100.00 5,000.00 379 0359 Pack Dressing Pack Contents: Sterile Gauze 4x4x8, 5's: 5 Packs Cotton Balls 3's:1 Pack Plaster Paper Tape 1"x10y: 1 Roll Povidone Iodine 15ml:1bot 2,500 350.00 875,000.00 380 Cotton Tipped Applicator Sterile:5 Pcs 381 0096 Kit Cesarean Section Kit- Cloth Bag With A Loop Handle That Contains The Gcgmmc Logo On The Front Side With The Mantra "so Gallares, So Kind" Labeled "cs Kit" On The Back Side. Contents Are Placed Inside The Bag With A Zipper Are The Following: -5 Packs-gauze Sterile 4x4x8ply,5's -6 Pairs Gloves Surgical Sterile Powder-free Latex-sensitive 6.5 -2 Pairs Glove Surgical Sterile Powder-free Latex Sensitive 7.0 -1 Pc Syringe 1ml Luer Lock/slip With Ultra-fine Needle G. 25 X 16mm, With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 3 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 5 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 10 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -1 Pc Foley Bag Catheter 2-way Fr. 16 With Needle-freeport -1 Urine Bag -1 Sterile Cord Clamp -1 Sachet Of Detergent Powder 75 Grams -1 Pc Underpad 800 1,500.00 1,200,000.00 382 0102 Pc Dressing Paraffin Gauze 10x10cm Sterile Individually Wrapped 1,000 75.00 75,000.00 383 0104 Pc Dressing Post-op 06.5x5cm 600 100.00 60,000.00 384 0105 Pc Dressing Post-op 09.5x8.5cm 600 200.00 120,000.00 385 0106 Pc Dressing Post-op 20x10cm 600 400.00 240,000.00 386 0107 Pc Dressing Post-op 25x10cm 600 450.00 270,000.00 387 0115 Pack Ecg Clip On Electrodes 4's 10 3,500.00 35,000.00 388 0472 Roll Ecg Recording Paper, 50 X 30mm. 60 50.00 3,000.00 389 0116 Roll Ecg Recording Paper, 63 X 30mm. 600 100.00 60,000.00 390 0473 Roll Ecg Recording Paper, 80 X 20-30mm 30 600.00 18,000.00 391 0117 Pack Ecg Rubber Chest Bulbs With Metal 6's 10 4,500.00 45,000.00 392 0119 Pack Electrodes, Radioluscent, 50's 1,000 10.00 10,000.00 393 0561 Roll Gauze Absorbent 36x100yd, X-ray Detectable 120 1,200.00 144,000.00 394 0562 Pack Gauze Absorbent, Non-sterile 2x2x12ply, 100’s 900 50.00 45,000.00 395 0121 Pack Gauze Absorbent, Non-sterile 4x4x12ply, 100’s 5,000 150.00 750,000.00 396 0563 Pack Gauze Absorbent, Sterile 2x2x8ply, 100's 12,000 5.00 60,000.00 397 0122 Pack Gauze Absrobent, Sterile 4x4x12ply, X-ray Detectable 5's 50,000 20.00 1,000,000.00 398 0465 Box Gloves Non-sterile, Latex, Large, 100's 6,000 200.00 1,200,000.00 399 0456 Box Gloves Non-sterile, Latex, Medium, 100's 9,000 200.00 1,800,000.00 400 0457 Box Gloves Non-sterile, Latex, Small, 100's 9,000 200.00 1,800,000.00 401 0360 Box Gloves Surgical Sterile Powder-free Hypoallergenic 6.0, 50's 360 1,900.00 684,000.00 402 0126 Box Gloves Surgical Sterile Powder-free Hypoallergenic 6.5, 50's 1,080 1,900.00 2,052,000.00 403 0127 Box Gloves Surgical Sterile Powder-free Hypoallergenic 7.0, 50's 720 1,900.00 1,368,000.00 404 0128 Box Gloves Surgical Sterile Powder-free Hypoallergenic 7.5, 50's 720 1,900.00 1,368,000.00 405 0129 Box Gloves Surgical Sterile Powder-free Latex-free Hypoallergenic 6.5, 50's 12 4,250.00 51,000.00 406 0130 Box Gloves Surgical Sterile Powder-free Latex-free Hypoallergenic 7.0, 50's 12 4,250.00 51,000.00 407 0137 Pc Guedal Airway 0 50 30.00 1,500.00 408 0138 Pc Guedal Airway 1 90 30.00 2,700.00 409 0139 Pc Guedal Airway 2 750 30.00 22,500.00 410 0140 Pc Guedal Airway 3 750 30.00 22,500.00 411 0141 Pc Guedal Airway 4 400 30.00 12,000.00 412 0142 Bot Hand Disinfectant, Propan-2-ol, Propan-1-ol Mecetronium Ethylsulfate, 1l 125 2,000.00 250,000.00 413 0572 Bot Hand Disinfectant, Ethanol And Propan-1-ol, 1l 500 1,200.00 600,000.00 414 0503 Pc Hot Water Bag, With Cloth Wrap 90 100.00 9,000.00 415 0146 Bot Humidifier Oxygen, Sterile Water, 340ml 3,000 175.00 525,000.00 416 0147 Bot Hydrogen Peroxide 3%, 120ml 450 200.00 90,000.00 417 0482 Pc Ice Bag, Adult 100 100.00 10,000.00 418 1080 Pc Ice Bag, Pedia 50 100.00 5,000.00 419 0785 Pc Infant Neonatal Phototherapy Eye Care Mask 30 200.00 6,000.00 420 0786 Pc Intubating Stylet, Fr. 06 50 50.00 2,500.00 421 0787 Pc Intubating Stylet, Fr. 10 50 50.00 2,500.00 422 0156 Pc Intubating Stylet, Fr. 14 125 50.00 6,250.00 423 0371 Sachet Lubricating Jelly, 0.5 Grams 18,000 5.00 90,000.00 424 0478 Pc Manual Vacuum Aspirator 6 1,500.00 9,000.00 425 0166 Pc Mask Face N95 Medium 3,000 150.00 450,000.00 426 0167 Pc Mask Face N95 Small 4,500 100.00 450,000.00 427 0171 Pc Mask Oxygen Non-rebreathing, Adult 2,500 50.00 125,000.00 428 0172 Pc Mask Oxygen Non-rebreathing, Pedia 900 50.00 45,000.00 429 0479 Pc Mask Oxygen With Rebreather, Adult 900 50.00 45,000.00 430 0174 Pc Medicine Cup With 30cc Calibration 9,000 50.00 450,000.00 431 0609 Pc Mucus Strap Extractor Fr. 05 50 100.00 5,000.00 432 0789 Pc Mucus Strap Extractor Fr. 08 50 100.00 5,000.00 433 0483 Pc Mucus Strap Extractor Fr. 12 150 120.00 18,000.00 434 0173 Kit Maternity Kit: Cloth Bag With A Loop Handle That Contains The Gcgmmc Logo Front Side With The Mantra "so Gallares, So Kind" Labeled "maternity Kit" On The Back Side Contents Placed Inside The Bag With Zipper 1 - Pair Of Gloves Powder-free Elbow-length 6.5 1 - Pair Of Gloves Powder-free Elbow-length 7.0 5 - Pair Of Gloves Powder-free 6.5 1 -pair Of Gloves Powder-free 7.0 2 - Safety Syringe, 3ml 1 - Safety Syringe, 10ml 5-gauze 4x4 Sterile 1- Cord Clamp Sterile 1- Cotton Ball 2-alcohol Swabs 1- Detergent Powder At Least 75grams 1-underpad 1,500 1,200.00 1,800,000.00 435 0183 Pc Mucus Strap Extractor Fr. 14 450 120.00 54,000.00 436 0184 Pc Nebulization Kit With Mask, Nozzle And Tubings, Adult 500 50.00 25,000.00 437 0611 Pc Nebulizer With Tubing (mask And Nozzle), Adult 1,050 50.00 52,500.00 438 0612 Pc Nebulizer With Tubing (mask And Nozzle), Pedia 1,050 50.00 52,500.00 439 0795 Box Needle Disposable Im G. 16 1" Preferably With Safety Features 100’s 5 150.00 750.00 440 0185 Box Needle Disposable Im G. 18 1½” Preferrably With Safety Features 100’s 600 150.00 90,000.00 441 0186 Box Needle Disposable Im G. 19 1½” Preferrably With Safety Features 100’s 600 150.00 90,000.00 442 0187 Box Needle Disposable Im G. 21 1” With Safety Features 100’s 600 250.00 150,000.00 443 0188 Box Needle Disposable Im G. 23 1” With Safety Features 100’s 600 250.00 150,000.00 444 0189 Box Needle Disposable Im G. 24 1” Preferrably With Safety Features 100’s 5 150.00 750.00 445 0796 Box Needle Disposable Im G. 25 1" Preferrably With Safety Features 100’s 5 150.00 750.00 446 0190 Box Needle Disposable Im G. 26 1” Preferrably With Safety Features 100’s 150 150.00 22,500.00 447 0614 Box Needle Microfine Pen G.23 X 4mm 15 1,500.00 22,500.00 448 0192 Kit Newborn Kit: 1 - Cloth Bag With Loop Handle That Contains The Gcgmmc Logo Front Side With Mantra "so Gallares, So Kind" Labeled "newborn Kit" On The Back Side Contents Placed Inside The Bag With Zipper 2 - Cotton Balls 1 - Pair Of Gloves Powder-free 6.5 1 - Syringe, 1ml - 1 - Syringe Insulin G.31, 6mm 1 - Infant Reusable Diaper 1 - Digital Thermometer With Calibration Certificate 1 - Baby Bonnet 3,000 700.00 2,100,000.00 449 0623 Pack Paper Towel At Least 175 Pulls 4,500 40.00 180,000.00 450 0194 Box Pediatric Urine Collector 100’s 15 350.00 5,250.00 451 0198 Pc Philadelphia Collar Large 30 1,500.00 45,000.00 452 0199 Pc Philadelphia Collar Medium 30 1,500.00 45,000.00 453 0200 Pc Philadelphia Collar Small 30 1,500.00 45,000.00 454 0201 Tube Plaster Adhesive 300 3,000.00 900,000.00 455 827401 Pc Permicath With Stylet And Splitting Needle Fr. 1 X 20cm 25 15,000.00 375,000.00 456 0626 Roll Plaster Adhesive Zinc Oxide 1.25cm X 5m 300 300.00 90,000.00 457 0627 Roll Plaster Adhesive Zinc Oxide 2.5cm X 5m 300 400.00 120,000.00 458 0193 Kit Patient's Kit Contents: 1 Cloth Bag With A Handle In Green With Printed Gcgmmc Logo With Mantra On The Front And Doh Programs At The Back 1-bath Soap, 25 Grams 1-tooth Brush With Hospital Logo 1-210cc Calibrated Drinking Glass With Hospital Logo 1-alcohol 70% Isopropyl 60ml 1-2ply Toilet Paper Roll 1-toothpaste Sachet, 10 Grams 1-digital Thermometer With Plastic Case (to Include Calibrated Certificate Of Thermometer) 1-rubber Slipper Size 8 6,000 500.00 3,000,000.00 459 0628 Roll Plaster Adhesive Zinc Oxide 5cm X 5m 900 600.00 540,000.00 460 0629 Roll Plaster Adhesive Zinc Oxide 7.5cm X 5m 1,000 900.00 900,000.00 461 1082 Roll Plaster Paper Tape, 1.25cm X 9.1m 300 100.00 30,000.00 462 0202 Roll Plaster Paper Tape, 2.5cm X 9.1m 100 150.00 15,000.00 463 0203 Roll Plaster Plastic Tape, 2.5cm X 9.1m 1,000 150.00 150,000.00 464 0204 Roll Plaster Plastic Tape, 5cm X 9.1m 600 175.00 105,000.00 465 0205 Roll Plaster Plastic Tape, 7.6cm X 9.1m 1,000 250.00 250,000.00 466 0206 Roll Plaster Silk Tape, 2.5cm X 9.1m 100 200.00 20,000.00 467 0207 Bot Polyhexanide Wound Irrigating Solution, 350ml 600 900.00 540,000.00 468 0213 Pack Povidone Swab Sticks, 3’s 1,800 100.00 180,000.00 469 0214 Pc Probe Disposable Adult Compatible With Existing Pulse Oximeter 250 500.00 125,000.00 470 0484 Pc Probe Disposable Pedia Compatible With Existing Pulse Oximeter 250 500.00 125,000.00 471 0215 Pc Probe Disposable Neonate Compatible With Existing Pulse Oximeter 180 500.00 90,000.00 472 0216 Pc Resuscitator Bag Disposable, Silicone With Container, Adult 600 1,100.00 660,000.00 473 0217 Pc Resuscitator Bag Disposable, Silicone With Container, Neonate 150 1,100.00 165,000.00 474 0218 Pc Resuscitator Bag Disposable, Silicone With Container, Pedia 180 1,100.00 198,000.00 475 0349 Pc Shoe Cover, Ankle Length, Disposable 700 250.00 175,000.00 476 0455 Pc Spirometer 300 250.00 75,000.00 477 0251 Pc Stopcock 3-way Disposable With Extension Tubing 7,800 50.00 390,000.00 478 0252 Pc Suction Connecting Tube 8,500 75.00 637,500.00 479 0389 Bot Surface Disinfectant Spray 300 800.00 240,000.00 480 0660 Pack Surface Disinfectant Wipes, At Least 100 Pulls 1,000 1,200.00 1,200,000.00 481 0255 Pc Surgical Clipper Blade 1,500 400.00 600,000.00 482 1081 Box Syringe 1ml No Needle, Sterile, Individually Packed Disposable, 100's 600 800.00 480,000.00 483 1006 Box Syringe 3ml No Needle, Sterile, Individually Packed Disposable, 100's 2,500 700.00 1,750,000.00 484 1009 Box Syringe 5ml No Needle, Sterile, Individually Packed Disposable, 100's 2,500 900.00 2,250,000.00 485 1014 Box Syringe 10ml No Needle, Sterile, Individually Packed Disposable, 100's 2,000 1,050.00 2,100,000.00 486 0295 Box Syringe 20ml No Needle, Sterile, Individually Packed Disposable, 50's 1,200 500.00 600,000.00 487 0296 Box Syringe 50-60ml No Needle, Sterile, Individually Packed Disposable, 25's 1,200 500.00 600,000.00 488 0293 Pc Syringe Asepto With Bulb 5,500 30.00 165,000.00 489 0665 Box Syringe Disposable Insulin G. 31, 6mm, 100’s 600 900.00 540,000.00 490 0823 Pc Tape Measure 100 10.00 1,000.00 491 0241 Pc Thermometer Digital With Calibration Certificate 1,000 200.00 200,000.00 492 0458 Pc Tourniquet Rubber Latex 600 10.00 6,000.00 493 0299 Kit Tracheostomy Care Kit: 1pc- Moisture-proof Drape 1pair- Vinyl Gloves 4pc- 4" X 4" And 4-ply Premium Gauze Sponges 1pc- Bristle Brush 1pc- Disposable Forcep 1pc- Premium Tracheostomy Dressing 250 350.00 87,500.00 494 0394 Pc Tracheostomy Dressing 360 100.00 36,000.00 495 0305 Pc Tube Duodenal Silicone Fr. 10 300 300.00 90,000.00 496 0399 Pc Tube Duodenal Silicone Fr. 12 300 300.00 90,000.00 497 0306 Pc Tube Duodenal Silicone Fr. 14 600 300.00 180,000.00 498 0307 Pc Tube Duodenal Silicone Fr. 16 3,000 300.00 900,000.00 499 0372 Pc Tube Endotracheal Size 2.5, Uncufed 100 40.00 4,000.00 500 0373 Pc Tube Endotracheal Size 3.0, Uncuffed 600 40.00 24,000.00 501 0374 Pc Tube Endotracheal Size 3.5, Uncuffed 600 40.00 24,000.00 502 0375 Pc Tube Endotracheal Size 4.0, Uncuffed 300 40.00 12,000.00 503 0376 Pc Tube Endotracheal Size 4.5, Uncuffed 100 40.00 4,000.00 504 0377 Pc Tube Endotracheal Size 5.0, Cuffed 300 40.00 12,000.00 505 0378 Pc Tube Endotracheal Size 5.5, Cuffed 300 40.00 12,000.00 506 0379 Pc Tube Endotracheal Size 6.0, Cuffed 300 40.00 12,000.00 507 0380 Pc Tube Endotracheal Size 6.5, Cuffed 300 40.00 12,000.00 508 0381 Pc Tube Endotracheal Size 7.0, Cuffed 1,200 40.00 48,000.00 509 0382 Pc Tube Endotracheal Size 7.5, Cuffed 1,800 40.00 72,000.00 510 0641 Pc Tube Endotracheal Size 8.0, Cuffed 10 40.00 400.00 511 0303 Pc Tube Feeding Fr. 5 100-120cm 1,200 50.00 60,000.00 512 0304 Pc Tube Feeding Fr. 8 100-120cm 1,500 50.00 75,000.00 513 951466 Pc Umbilical Vein Catheter Fr. 4.0 X 37cm 150 600.00 90,000.00 514 517115 Pc Umbilical Vein Catheter Fr. 6.0 X 37cm 150 600.00 90,000.00 515 0363 Pc Underpad 3,000 20.00 60,000.00 516 0383 Pc Urine Bag, 2000ml Reservoir 2,100 50.00 105,000.00 517 0320 Pc Urine Meter With Needle Free Sample Port 240 1,000.00 240,000.00 518 0444 Pc Vacuum Delivery System With Palm Pump 60 5,000.00 300,000.00 519 0321 Box Wooden Stick Applicator 1000’s 300 250.00 75,000.00 520 0322 Box Wooden Tongue Depressor Sterile, 100's 120 100.00 12,000.00 521 0323 Box Wristlet, Adult (white), 100’s 60 350.00 21,000.00 522 0324 Box Wristlet, Pedia (blue), 100’s 60 350.00 21,000.00 523 0325 Box Wristlet, Pedia (pink), 100’s 60 350.00 21,000.00 Sub-total 50,414,950.00 Total Batch 1 157,645,850.00 Batch 2 S/n Unit Item Qty Unit Cost Total Cost 1 Pc Polysulfone Low Flux Dialyzer 1,000 916.50 916,500.00 2 Pc Polysulfone High Flux Dialyzer 1,000 933.40 933,400.00 3 Pc Av Fistula Needle (arterial) 10,000 22.75 227,500.00 4 Pc Av Fistula Needle (venous) 10,307 22.78 234,794.00 5 Pc Hemobloodlines 10,390 182.00 1,890,980.00 6 Cann Premix Solution (bicarbonate Concentrate): 5 Liters In Cannisters 15,000 253.50 3,802,500.00 7 Cann Premix Solution (acid Concentrate): 5 Liters In Cannisters 15,000 253.50 3,802,500.00 8 Gal Disinfectant For The Machine (inside) 200 4000.00 800,000.00 9 Gal Disinfectant For The Dialyzer 200 4547.40 909,480.00 10 Sack Industrial Salt 100 455.00 45,500.00 11 Tube Residual Test Strip 100/tube 40 1154.40 46,176.00 12 Tube Potency Test Strip 100/tube 40 2598.70 103,948.00 13 Pc Ultrapure Dialysate Filter 120 9097.40 1,091,688.00 14 Pc Df Filter 30 9097.40 272,922.00 15 Kit Fistula Kit: 1pc Syringe Disposable 20cc, 1 Pc Needle G 23 With Safety Feature, 1 Pair Gloves Surgical Sterile Powder-free Hypoallergenic S 7.0, 1pc Dental Bib, 2pcs. Cherry Balls, 1 Pack Gauze Absorbent, Sterile 4x4x8ply, 5', 3pcs. Chlorhexidine Prep Pad 6,000 550.00 3,300,000.00 16 Pack Subclavian Catheter On Pack: 1 Pair Nitrile Gloves Medium, 1 Pc Syringe Disposable Without Needle, 1 Pair Gloves Sterile Powder-free Hypoallergenic S7.0, 1 Pc Underpad, 2 Pcs 10cc Syringe Without Needle, 2 Pcs 3cc Syringe Without Needle, 1 Pack Gauze Absorbent, Sterile 4x4x8 Ply 5’, 1 Pack Povidone Swab Stick Of 3 2,500 550.00 1,375,000.00 17 Pack Subclavian Catheter Off Pack: 1 Pair Nitrile Gloves Medium, 1 Pair Gloves Surgical Sterile Powder-free Hypoallergenic 7.0, 1 Pc 10cc Syringe, 1 Pc 3cc Syringe, 1 Pack Gauze Absorbent, Sterile 4x4x8ply 5’, 2 Pcs Heplock, 1 Set Transparent Film Dress 10cm X 12 Cm 2,500 550.00 1,375,000.00 Notes: End-user Requirements: 1. Items Shall Be Delivered Within 10 Days. 2. Reported Defective Items Shall Be Replaced By The Supplier For Safety And Quality Assurance. 3.the Institution Must Be Allowed To Exchanged Products That Are About To Expire Up To At Least 3 Months Before Expiration Date. 4.guarantee Letter That Supports End-user Requirements No.2 & 3 Upon Delivery. 5.certificate Product Registration / Coe / Certificate Of Renewal/cmdn. Sub-total 21,049,614.00 18 Bag Capd/dpca 2 Stay Safe Link Peritoneal Dialysis Solution 2.3% 2l 180 300.00 54,000.00 19 Bag Capd/dpca 2 Stay Safe Link Peritoneal Dialysis Solution 1.5% 2l 720 300.00 216,000.00 20 Pc Peritoneal Dialysis Extension Catheter (40cm) 12 1840.00 22,080.00 21 Pc Catheter Adaptor Luer-lock With Closure Cap 4 480.00 1,920.00 22 Pc Peritoneal Dialysis Organizer 2 1400.00 2,800.00 23 Pc Disinfection Cap 900 26.00 23,400.00 Notes: End-user Requirements: 1. Item Shall Be Delivered Within 10 Days. 2. Reported Defective Items Shall Be Replaced By The Supplier For Safety And Quality Assurance. 3. The Institution Must Be Allowed To Exchange Products That Are About To Expire Up To At Least 3 Months Before Expiration Date. 4. Guarantee Letter That Supports End-user Requirements No.2 & 3 Upon Delivery. 5. Certificate Product Registration/coe/certificate Of Renewal/cmdn Sub-total 320,200.00 Total Batch 2 21,448,088.00 Grand Total Batch 1 & 2 179,015,664.00