Valve Tenders

Details: Description Republic Of The Philippines City Of Canlaon Office Of The Bids And Awards Committee Invitation To Bid For The Early Procurement Activity (epa) For The Procurement Of Construction Materials For The Construction Of Cr The Local Government Of Canlaon City, Through The Aip 2025 Intends To Apply The Sum Three Hundred Twenty-one Thousand, Five Hundred Eighty-eight (p321,588.00) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Various Construction Materials For Use In The Construction Of Cr, Gaboc Plaza, Brgy. Malaiba, Canlaon City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Award Of The Contract Is Subject To The Effectivity Of The General Appropriations Act (gaa) For Fy 2025. The Local Government Of Canlaon City Is Conducting This Procurement Through The Early Procurement Activity (epa) For Fy 2025 To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services, Consistent With The Gppb Resolution No. 14-2019 Dated July 17, 2019. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e Fy 2025), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Local Government Of Canlaon City, Will Evaluate The Bid Proposal And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be The Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget. C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Validity, If The Bidder Refuses To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. The Local Government Of Canlaon City, Now Invites Bids For The Supply And Delivery Of Various Construction Materials For Use In The Construction Of Cr, Gaboc Plaza, Brgy. Malaiba, Canlaon City. Delivery Of The Goods Is Required 7 Calendar Days After Issuance And Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Ten Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184 Interested Bidders May Obtain Information For The City Government Of Canlaon City Thru The Office Of The Bids And Awards Committee And Inspect Bidding Documents During Office Hours (8:00am To 5:00pm), Monday To Friday. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On November 4, 2024 To November 25, 2024 Until 10:00 Am At The Office Of The Bids And Awards Committee, Canlaon City, And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (p500.00) Pesos. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Facsimile. The Local Government Of Canlaon City Will Hold A Pre-bid Conference On November 12, 2024 – 2:00 Pm At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City, Which Shall Be Open To Prospective Bidders Bids Must Be Received By The Bac Secretariat Through Manual Submission On Or Before November 25, 2024, 10:00 Am At The Office Of The Bids And Awards Committee, 2nd Floor, City Hall Building, Canlaon City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On November 25, 2024, 10:00 Am At The At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. For The Purpose Of Constituting A Quorum, Either The Physical And Virtual Presence Of The Bac Member Shall Be Considered Pursuant To Gppb Resolution No. 09-2020. The Local Government Unit Of Canlaon Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Alice D. Mcguiggan Bac Secretariat Mobile No. 0917-561-7931 Email Address: Bacofficelgucanlaon@yahoo.com Date Of Posting: November 3, 2024 Doris Y. Flores Bac Chairperson Republic Of The Philippines City Of Canlaon Bids And Awards Committee Control No.: #1 Bid Form Name Of Project: Construction Of Cr Brief Description: Supply And Delivery Of Various Construction Materials Location: Gaboc Plaza, Brgy. Malaiba, Canlaon City Bill Of Quantities Stock No. Quantity Unit Item Description Unit Cost Unit Cost Total Cost 1. 4 Shts 0.40mm Thk Corr. Gi Roofing Sheet X 10' 819.00 2. 4 Shts 0.40mm Thk. Plain Gi Sheet X 8' 670.00 3. 5 Sets. 0.70m X 2.10 Pvc Door, White W/ Complete Accessories (hinges And Screws) 3,137.00 4. 10 Pcs. ½"ф Pvc Coupling, Blue 11.00 5. 34 Pcs. ½"ф Pvc Elbow 90°, Blue 16.00 6. 10 Pcs. ½"ф Pvc Female Adapter, Blue 23.00 7. 4 Pcs. ½"ф Pvc Gate Valve, Blue 385.00 8. 12 Pcs. ½"ф Pvc Pipe, Blue 110.00 9. 11 Pcs. ½"ф Pvc Tee, Blue 20.00 10. 8 Pcs. 1" X 2" X 20' Tubular Section Section/rhs, Gi 545.00 11. 6 Pcs. 1.0mm Thk 2" X 3" C-purlins, Gi 779.00 12. 1 Pcs. ¼" X 1" X 20' Flat Bar 567.00 13. 5 Shts ¼" X 4' X 8' Ordinary Plywood 547.00 14. 4 Pcs. ⅛"x1"x1" Angular Bar 435.00 15. 5 Pcs. 10mm Square Bar 246.00 16. 122 Pcs. 10mmф Def. Bar 239.00 17. 2 Pc. 13"ф Cutting Disc For Cut-off Machine 578.00 18. 1 Pc. 14"ф Diamond Tile Cutter Blade 526.00 19. 1 Pc. 14"ф Disc Cutter For Cut-off 578.00 20. 5 Pcs. 2"ф Pvc Coupling, Orange 25.00 21. 2 Pcs. 2"ф Pvc Elbow 45°, Orange 29.00 22. 10 Pcs. 2"ф Pvc Elbow 90°, Orange 37.00 23. 10 Pcs. 2"ф Pvc Pipe S-500, Orange 145.00 24. 1 Pc. 2"ф Pvc Sanitary Pipe, Orange 150.00 25. 2 Pcs. 2"ф Pvc Tee 51.00 26. 6 Kgs. 2.40mmф E6013 Ordinary Welding Rod, Wipweld 176.00 27. 11 Pcs. 4" X 4" Pvc Floor Drain 100.00 28. 36 Pcs. 4"ф Cutting Disc 150.00 29. 2 Pcs. 4"ф Grinding Disc 317.00 30. 2 Pcs. 4"ф Pvc Clean Out With Plug 112.00 31. 10 Pcs. 4"ф Pvc Coupling, Orange 50.00 32. 5 Pcs. 4"ф Pvc Elbow 90°, Orange 108.00 33. 11 Pcs. 4"ф Pvc Pipe S-500, Orange 391.00 34. 2 Pcs. 4"ф Pvc Tee, Orange 204.00 35. 5 Pcs. 4"ф Pvc Wye, Orange 195.00 36. 2 Pcs. 4"ф X 2"ф Reducer Tee, Orange 145.00 37. 6 Pcs. 4"ф X 45° Elbow, Orange 81.00 38. 850 Pcs. 4"x8"x16"chb 19.00 39. 134 Bd.ft. 50-2"x2"x8' Rough Lumber, Gemelina 55.00 40. 1 Sht. 8"x8" Tarpaulin W/print 4,500.00 41. 20 Kgs. Abc Tile Grout, Gray 2kg/pack 83.00 42. 9 Cu.m. Crushed Gravel ¾" 2,378.00 43. 2 Kg. Cwnails 1½ 101.00 44. 5 Kg. Cwnails 2" 97.00 45. 7 Kgs. Cwnails 3" 92.00 46. 10 Kgs. Cwnails 4" 89.00 47. 100 Pcs. Espana Classic, 40cm X 40cm, Floor Tiles Misty Grey 110.00 48. 10 Pcs. Faucet, Water Tee 185.00 49. 15 Cu.m. Fine Sand 1,348.00 50. 3 Mtrs. Flexible Conduit Pipe, ½"ф Upvc Coilable, Moldex, Orange 30.00 51. 15 Kg. Ga. 16 Gi Tie Wire 103.00 52. 24 Pcs. Glass Block, 8" X 8", Clear 300.00 53. 11 Bags Heavy Duty Tile Adhesive, 25kg/bag 550.00 54. 2 Bags Heavy Duty Tile Adhesive, 25kg/bag 550.00 55. 135 Pcs. Italgress Premium, Wall Tiles 60cm X 60cm Terrazo Gray 215.00 56. 5 Sets. Keyless, Door Knob, W/complete Accessories 1,500.00 57. 30 Pcs. Master Tile Trim, 10mm X 2.50m Aluminum/silver 185.00 58. 13 Pcs. Master Tile Trim, 10mm X 2.50m Aluminum /silver 185.00 59. 2 Pcs. Paint Brush 2" 52.00 60. 70 Pcs. Platinum Thomson, Wall Tiles 30cm X 60cm Grey 140.00 61. 5 Sets. Porcelain Water Closet, Pail Flush 2,500.00 62. 214 Bags Portland Cement, Republic 272.00 63. 6 Can Pvc Solvent, 200ml 110.00 64. 2 Gals Red Lead, Primer Paint 1,015.00 65. 5 Rolls Teflon Tape ¾", Tombo 44.00 66. 132 Pcs. Tekscrew For Metal 2½" 5.00 67. 2 Pcs. Utility Box, 2"x4" Upvc Orange Color 35.00 Total Brand Model:_____________ Delivery Period:______________________ Warranty: After Having Carefully Read & Accepted Your General Conditions. I/we Quote On The Item/s Price/s Noted Above. Total Bid Price (in Words) Bid Security: Amount: Submitted By: Bidder/supplier Date:_________________________

Details: Description Invitation To Bid For The Procurement Of One (1) Unit Of Passenger Van For The Jjwc National Secretariat (early Procurement Activity) Itb-fad-24-10-003 1. The Juvenile Justice And Welfare Council, Through The National Expenditure Program (nep) Of Fy 2025, Intends To Apply The Sum Of Two Million Three Hundred Thousand Pesos (php 2,300,000.00) Being The Abc To Payments Under The Contract For Procurement Of One (1) Unit Of Passenger Van For The Jjwc National Secretariat (early Procurement Activity) With The Following Minimum Specification: Specification Unit Model: 2024 Or Latest Model Body Type: Large Four-wheel Enclosed Vehicle Intended For Conveying Passengers And/or Hauling Cargo, Having Four (4) Or Five (5) Doors [two Side Doors For The Driver And Front Passenger, One (3) Or Two (2) Passenger Side Sliding Doors, And A Tailgate] Engine: 2500 Cc For Gasoline Or 3000cc For Diesel, At Least Euro 4-compliant, 4 Cylinders, 16 Valves; Or Alternative Fuel Vehicle Transmission: Automatic, 5-speed Or 6-speed Overall Dimensions: L=5,220 To 5,270, W=1,870 To 1,960, H=1,980 To 2,290; 2890 To 3,260 Wheelbase Seating Capacity And Configuration: 8 To 18 Passengers Including Driver; Has Several Rows Of Folding Or Removable Seats Behind The Front Passenger Seat; Expandable Area At The Rear Which Can Be Used For Luggage, Cargoes, Etc. Steering And Windows: Power Steering; Power Windows Wheel Size And Type: At Least 15 Inches; Steel Or Alloy Wheels Airconditioning: Manual, With Rear Vents Safety And Security Features: Driver’s And Front Passenger’s Airbags: Power/electronic Door Lock; Anti-lock Break System With Brake Assist; Security Alarm Other Features: With Entertainment/audio System Finish And Color: Standard Factory Finish, One-tone Color Additional Provisions: Vehicle Manual, Set Of Standard Tools And Wheel Equipment, Ewd, Portable Fire Extinguisher, “for Official Use Only” And Agency Logo And Name Markings Or Decals Incidental Services/warranty: 3 Years Or 100,000km Warranty; Initial Lto Registration And Gsis Comprehensive Insurance With Ctpl Coverage Location Of Store Dealer: Metro Manila Or Its Nearby Provinces (cavite, Laguna, Bulacan, Rizal) Manufacturer And Its Service Centers Should Be Existing For At Least Fifteen (15) Years In The Local Automotive Industry Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Juvenile Justice And Welfare Council Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Calendar Days From The Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Single Largest Completed Contract (slcc) That Is Similar To The Contract To Be Bid, And Whose Value Must Be At Least Fifty Percent (50%) Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Juvenile Justice And Welfare Council And Inspect The Bidding Documents At The Address Given Below During 9:00 Am To 4:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On 31 October 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Bids And Awards Committee Will Hold A Pre-bid Conference On 7. 08 November 2024 Starting At 11:00 Am Via Microsoft Teams Using The Following Link: Https://teams.microsoft.com/l/meetup-join/19%3ameeting_otm3ngfkmjktmznims00mzyylwe3mdqtztiynwexmjy4y2y2%40thread.v2/0?context=%7b%22tid%22%3a%22564a734b-289c-46ab-ae85-a000dd7edee3%22%2c%22oid%22%3a%22c29a01c5-9e7b-4210-98ab-779f29f8636e%22%7d 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Jjwc Maginhawa Office With Address At #140 Maginghawa St. Sikatuna Village, Quezon City On Or Before 09:00 Am Of 20 November 2024. Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On 20 November 2024 Starting At 11:00 Am At Jjwc Matimtiman Office Located At 56 Matimtiman Street, Teachers Village East, Diliman, Quezon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Opening Of Bids Will Also Be Available Via Live Feed Through Ms Teams With The Following Link: Https://teams.microsoft.com/l/meetup-join/19%3ameeting_ntbjn2exymitotixmc00mjezlwjjntmty2e4otvkntlhymux%40thread.v2/0?context=%7b%22tid%22%3a%22564a734b-289c-46ab-ae85-a000dd7edee3%22%2c%22oid%22%3a%22c29a01c5-9e7b-4210-98ab-779f29f8636e%22%7d 11. The Juvenile Justice And Welfare Council Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Mr. Marl Philippe Y. Cachero Bac Secretariat Head Finance And Administrative Division 6th Flr. Dc88 Bldg., 140 Maginhawa St., Sikatuna Village, Quezon City Email: Mycachero@jjwc.gov.ph; Cc: Procurement@jjwc.gov.ph Contact No. 02-8921-0565 Www.jjwc.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://jjwc.gov.ph/procurement-opportunities/ 30 October 2024 (signed) Esmeralda H. Distor Bac Chairperson

Details: Description Quantity Unit Item Description 1 Lot Procurement Of Integrated Full Mission Bridge And Engine Room Simulator With Desktop Station Full Mission Bridge Simulator (fmbs) And Mini Bridge Stations’ Features And Applications, Major Components, Bridge Simulator Performance Standards And Hardware 1. Major Components The Full Mission Bridge Simulators That Can Be Integrated With Engine Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Bridge Station With 270° Horizontal Display (class A Configuration); B. Seven (7) Mini Bridge Stations With 120° Horizontal Display (class B Configuration); C. One (1) Server Station; D. One (1) Instructor Station; E. One (1) Simulator Scenario Development Station; And F. One (1) Briefing/ Debriefing Station. 2. Features And Applications 2.1 The Bridge Simulator Should Provide A Realistic, Ship-like Environment Based On Real Hardware Consoles And High-quality Visualization. The Systems Include Major Components Such As Conning, Radar/ Arpa And Ecdis, Gmdss, Navigation Equipment, Bearing Finder, Steering Control Console, Engine Control, Auto Pilot System, Overhead Display, Etc. 2.2 The Bridge Simulator Product Shall Be Certified And Compliant As Class A (full Mission), B (multi-task), C (limited Task), And D (cloud-based Distant Learning) Type-approved Maritime Simulator System By An Internationally Recognized Classification Society. The Compliance With Classification Shall Be Reflected In The Certificate Of The Product. 2.3 The Simulator Can Be Utilized To A Variety Of Navigation Techniques Under Different Environmental Conditions, Serving A Wide Range Of Purposes As Follows: 1. Control Of The Ship While Navigating In The Operational And Emergency Modes In Various Weather Conditions With The Possibility Of Setting Wind And Current Parameters; 2. Analysis Of The Above-water Situation In Day And Night Conditions; In Poor Visibility By Visible Navigation Lights And Information Received From Radar/ Arpa; 3. Use Of The Electronic Chart-based Navigational Information System (ecdis); 4. Practical Use Of Radio Equipment And Global Maritime Distress And Safety System (gmdss) Facilities; 5. Application Of The International Regulations For Preventing Collisions At Sea; 6. Ship Control During Anchoring And Mooring; 7. Ship Control During Towing Operations; 8. Ship Control During Maneuvers "man Overboard"; 9. Rational Methods Of Ship Control In Case Of Main Engines (me) And Ship And Navigation Equipment Failures During Movement; 10. Eye Survey Of Above-water And Radar Situation, Determination Of Vessel Movement Elements; 11. Navigational Situation Assessment By Visual Observation During Daytime, By Lights At Night Time And By Observation Of Transmission Of Echo Signals On Ppi Simulators In Conditions Of Limited Visibility; 12. Visual Determination Of Vessel Movement Patterns, Maneuvering Capabilities And Dimensions; 13. Selection And Execution Of Collision Avoidance Maneuvers In Open Sea, During Night And In Limited Visibility Conditions Using Radar/arpa; 14. Evaluation Of Accuracy Of Primary And Secondary Information Received From Arpa, Consideration Of Factors Affecting Accuracy Of Arpa And Delay In Formation Of Secondary Radar Information; 15. Orientation Of Ships In Complex Navigation Conditions In Daytime And Nighttime And In Conditions Of Limited Visibility; 16. Use Of Ecdis For Preliminary And Executive Plotting, Practicing Correct Response To Emergency Signals Produced By Ecdis, Solution Of Chart-metric Tasks And Ensuring Safety Of Navigation With The Use Of Information Received From Ecdis; 17. Use Of Basic Capabilities Of Marine Mobile Service And Marine Mobile Satellite Service. 2.4 The Bridge Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate. · Table A-ii/1.1 - Plan And Conduct A Passage And Determine Position. • Table A-ii/1.2 - Maintain A Safe Navigational Watch. • Table A-ii/1.3 - Use Of Radar And Arpa To Maintain Safety Of Navigation. § Table A-ii/1.4 - Use Of Ecdis To Maintain The Safety Of Navigation. • Table A-ii/1.5 - Respond To Emergencies. • Table A-ii/1.6 - Respond To A Distress Signal At Sea. • Table A-ii/1.8 - Transmit And Receive Information By Visual Signaling. • Table A-ii/1.9 - Manoeuvre The Ship. • Table A-ii/2.1 - Plan A Voyage And Conduct Navigation. • Table A-ii/2.2 - Determine Position And The Accuracy Of Resultant Position Fix By Any Means. • Table A-ii/2.3 - Determine And Allow For Compass Errors. • Table A-ii/2.4 - Co-ordinate Search And Rescue Operations. • Table A-ii/2.5 - Establish Watchkeeping Arrangements And Procedures. • Table A-ii/2.6 - Maintain Safe Navigation Through The Use Of Information From Navigation Equipment And Systems To Assist Command Decision-making. • Table A-ii/2.7 - Maintain The Safety Of Navigation Through The Use Of Ecdis And Associated Navigation Systems To Assist Command Decision Making. • Table A-ii/2.10 - Maneuver And Handle A Ship In All Conditions. • Table A-ii/2.11 - Operate Remote Controls Of Propulsion Plant And Engineering Systems And Services. • Table A-ii/3.1 - Plan And Conduct A Coastal Passage And Determine Position. • Table A-ii/3.2 - Maintain A Safe Navigational Watch. • Table A-ii/3.3 - Respond To Emergencies. • Table A-ii/3.4 - Respond To A Distress Signal At Sea. • Table A-ii/3.5 - Manoeuvre The Ship And Operate Small Ship Power Plants. • Table A-ii/4.1 - Steer The Ship And Also Comply With Helm Orders In The English Language. • Table A-ii/4.2 - Keep A Proper Look-out By Sight And Hearing. § Table A-ii/5.2 - Contribute To Berthing, Anchoring And Other Mooring Operations. • Table A-v/4-1.1 - Contribute To Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-1.2 - Monitor And Ensure Compliance With Legislative Requirements. • Table A-v/4-1.3 - Apply Safe Working Practices, Respond To Emergencies. • Table A-v/4-1.4 - Ensure Compliance With Pollution-prevention Requirements And Prevent Environmental Hazards. • Table A-v/4-2.1 - Plan And Conduct A Voyage In Polar Waters. • Table A-v/4-2.2 - Manage The Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-2.3 - Maintain Safety Of The Ship's Crew And Passengers And The Operational Condition Of Life- Saving, Firefighting And Other Safety Systems. 2.5 The Bridge Simulator Shall Allow For Training And Certification Of Watch Officers, Chief Officers, Captains, And Pilots Serving On Commercial And Fishing Vessels Of 500 Gross Tonnage Or More In Accordance With The Requirements Of The Imo Stcw Convention And Model Courses: · 1.07 – Radar Navigation, Radar Plotting And Use Of Arpa; · 1.08 – Radar, Arpa, Bridge Teamwork And Search & Rescue; · 1.22 – Ship Simulator And Bridge Teamwork; · 1.27 – Operational Use Of Electronic Chart Display And Information System (ecdis); · 1.32 – Operational Use Of Integrated Bridge System; · 1.34 – Operational Use Of Ais; · 2.02 – Maritime Sar Coordinator; · 3.11 – Marine Accident And Incident Investigation With Compendium; · 3.19 – Ship Security Officer; · 3.23 – Actions To Be Taken To Prevent Acts Of Piracy And Armed Robbery; · 7.01 – Master And Chief Mate; · 7.03 – Officer In Charge Of Navigational Watch; · 7.05 – Officer In Charge Of Navigational Watch Of Fishing Vessel; · 1.25 – General Operator’s Certificate For The Gmdss; · 1.26 – Restricted Operator’s Certificate For The Gmdss. 2.6 The Bridge Simulator Shall Have All The Ownship Models, Target Ship Models , Objects And Exercise Areas Available In The Database Of The Simulator Product. It Shall Also Include Polar Areas, The Existing Models And Areas In Current Simulator, Naval And Coast Guard Ship Models, Ship Models Ready For Integration With Engine Simulators And Ship/engine Models Using Future Fuels. 2.7 The Simulator Shall Have Intercom Installed In The Instructor Station And All Bridge Stations. 2.8 The Simulator Shall Have An Evaluation And Assessment Method Designed For The Evaluation And Assessment Of A Range Of Predefined Assessment Parameters From The Following Categories: • Planning And Conducting A Passage And Determine Position; • Maintain Safe Navigational Watch; • Using Radar And Arpa To Maintain Navigational Safety; • Ability To Operate And Analyze Information Obtained From Arpa; • Respond To Emergencies; • Use Imo Standard Marine Communication Phrases And Use English Inwriting And Speaking; • Transmit And Receive Information Using Visual Signals; • Maneuver The Ship; • Colreg. 2.9 The Simulator Shall Have The Ability To Set Up A Scoring And Grading System To Evaluate The Operator’s Performance. The Program Allows The Instructor To Monitor The Results Of The Bridge Team / Operator Workstation Performance. 2.10 The Simulator Shall Be Capable Of Simulating Ship Operation In Polar Waters Or Ice Navigation According To The Polar Code And Shall Have The Following Training Capabilities: - Ice Management Of Offshore Installations In An Arctic Environment, - Use Of Radar Data And Ice Charts In Ecdis While Navigating In Ice Conditions, - Following Of Icebreakers, - Offshore Loading Operations To Include Mooring To Single Point Mooring And Floating Production Storage And Offloading Equipment In Ice Conditions, And - Navigation In Shattered Ice, Along Hard Ice Edges, Bumping Against Ice Edges, In Open Pack Ice, In Ice Holes, And Spots Of Ice-free Water. 2.11 The Ice Navigation Environment Shall Have The Following Characteristics: - Capable Of Ice Accumulation On Ship Superstructure, - Ship’s Tracks On Ice Fields Re-freeze As Programmed By The User, - Ice Mounds And Channels Can Be Added By The User, - Characteristics Of Ice Resistance Are Based On The Type Of Ice, Thickness, And Accumulation, - Capable Of Traversing Large Ice Areas, And - Realistic Representation Of Iceberg Objects. 3. Bridge Simulator Performance Standards 3.1 Physical Realism The Bridge Simulator Stations Shall Have The Following Physical Realism: A. The Equipment, Consoles, And Workstations Shall Be Installed, Mounted, And Arranged In A Manner That Mimics An Actual Bridge Of A Ship. B. The Workstations Shall Have Standard Rubber Mat Flooring. The Simulator Shall Have The Following Equipment: C. Controls Of Propulsion Plant Operations, Including Engine Telegraph, Pitch-control And Thrusters. There Shall Be Indicators For Shaft(s) Revolutions And Pitch Of Propeller(s). There Shall Be Controls For At Least One Propeller And One Bow Thruster. D. Controls Of Propulsion Plant For Mooring Operations. By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Operation Of Such Controls. E. Controls Of Auxiliary Machinery. There Shall Be Controls For At Least Two Auxiliary Engines, Including Electric Power Supply Control. F. Steering Console, Including Equipment For Hand Steering And Automatic Steering With Controls For Switchover. There Shall Be Indicators Of Rudder Angle And Rate Of Turn. G. Steering Compass And Bearing Compass (or Repeater) With An Accuracy Of At Least 1 Degree. H. At Least One Radar/arpa Display/unit (automatic Radar Plotting Aid). It Shall Be Possible To Simulate Both A 10 Cm (s-band) And A 3 Cm (x-band) Radars. The Radar Shall Be Capable To Operate In The Stabilised Relative-motion Mode And Sea- And Ground-stabilised True-motion Modes (see Stcw Section A-1/12.4.1 And 1/12.5 And Paragraph 2 Of Section B-i/12). I. Communication Equipment Per Gmdss (global Maritime Distress Safety System) Framework, Covering At Least The Requirements For The Relevant Area. J. The Simulator Shall Include A Communications System That Will Allow For Internal Ship Communications To Be Conducted. K. Ecdis (electronic Chart Display And Information System) Displaying Selected Information From A System Electronic Navigational Chart (senc) With Positional Information From Navigation Sensors Like Ais And Radar To Assist The Mariner In Route Planning And Route Monitoring, And By Displaying Additional Navigation-related Information. (see Stcw Section B-i/12). L. Gps (global Positioning System), Echo-sounder And Speed Log Showing Speed Through The Water (1 Axis) For Ships Below 50,000 Grt And In Addition Speed And Distance Over Ground In Forward And Athwart Ship Direction For Ships Above 50,000 Grt. M. Instrument (anemometer) For Indication Of Relative Wind- Direction And Force. N. Ship Sound Signal Control Panel According To Colreg. O. Instrument For Indication Of Navigational Lights. P. Function For Transmitting Visual Signals (morse Light). Q. Control System For General Alarm And Fire Detection/alarm And Other Alarms. R. Ais (automatic Identification System). S. Ship-borne Meteorological Instrument. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: T. Controls For Propulsion Plant Operations, Including Engine Telegraph, Pitch Control, And Thrusters. There Shall Be Indicators For Shaft Revolutions And Pitch Of Propeller. There Shall Be Controls For At Least One Propeller And One Bow Thruster. U. Two Speed And Distance Measuring Devices. Each Device Should Operate On A Different Principle, And At Least One Device Should Be Capable Of Being Operated In Both The Sea And The Ground Stabilized Mode. V. Searchlight Controllable From Conning Positions. W. Manually Operated Flashing Red Light Visible From Astern To Indicate When The Ship Is Stopped. X. Vdr (voyage Data Recorder) Or Capability For Vessel History Track And Learner Actions Log From The Instructor And The Assessor Position. Y. Equipment Capable Of Receiving Ice, Icing Warnings, And Weather Information Charts. Z. Anchoring And Towing Arrangements. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Aa. Workstation For Navigating, Maneuvering And Monitoring Consisting Of: · Radar/arpa · Ecdis · Conning Display · Binoculars Control · Autopilot Control · Observer Position/ Visual Control · Information On Position-fixing Systems · Information On Ship Automatic Identification System (ais) · Heading Control System · Flags, Daytime Shapes And Sound Signals · Control For The Main Engine Including Emergency Stop · Control For The Main Rudder Using Helm · Controls For Thruster · Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Internal Communication Equipment · Public Address System · Vhf With Channel Selector · Remote Control For Searchlight · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Illumination Of Equipment And Displays In The Surrounding Darkness · Sound Reception System · Acknowledgment Of The Watch Alarm · Controls For Console Lighting · Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light Bb. Workstation For Manual Steering (wheelhouse) Consisting Of: · Steering Wheel · Rudder Pump Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn Cc. Workstation For Planning And Documentation Consisting Of: · Ecdis Including Navigation Planning Station · Route Planning Devices · Chart Table · Paper Charts · Plotting Aids Dd. Workstation For Communications Consisting Of: · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer Ee. All Systems Related To The Integrated Bridge System Shall Include Failure Control(s) And Method(s) To Train And Assess The Learner In The Use Of Advanced Equipment, Technology And Enable Familiarization And Training To Understand The Limitations Of Automatic Systems. 3.2 Behavioral Realism The Bridge Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulation Of Ownship Shall Be Based On A Mathematical Model With 6 Degrees Of Freedom. B. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Open Water Conditions, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. C. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Restricted Waterways, Including Shallow Water And Bank Effects, Interaction With Other Ships And Direct, Counter And Sheer Currents. D. The Simulator Shall Include Mathematical Models Of Different The Types Of Ownships. E. The Simulator Shall Include Tug Models That Can Realistically Simulate Tug Assistance During Maneuvering And Escort Operations. It Shall Be Possible To Simulate Pull, Push, Reposition Towing And Escorting. F. The Simulator Shall Include Exercise Areas Including Correct Data For Landmass, Depth, Buoys, Tidal Streams And Visual As Appropriate To The Nautical Chart And Publication Used For The Relevant Training Objectives. G. The Radar Simulation Equipment Shall Be Capable Of Model Weather, Tidal Streams, Current, Shadow Sectors, Spurious And False Echoes And Other Propagation Effects, And Generate Coastlines, Navigational Buoys And Search And Rescue Transponders. H. The Arpa Simulation Equipment Shall Incorporate The Facilities For: - Manual And Automatic Target Acquisition - Fast Track Information - Use Of Exclusion Areas - Vector/graphic Time-scale And Data Display - Trial Maneuvers. I. The Ecdis Simulation Equipment Shall Incorporate The Facilities For: - Integration With Other Navigation Systems - Own Position - Sea Area Display - Mode And Orientation - Chart Data Displayed - Route Monitoring - User-created Information Layers - Contacts (when Interfaced With Ais And/or Radar Tracking) - Radar Overlay Functions. J. The Simulator Shall Provide An Own Ship Engine Sound, Reflecting The Power Output. K. The Simulator Shall Provide Capabilities For Realistically Conduct Anchoring Operations. L. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Interaction With Applicable Anchor And Chain Dimensions With Different Bottom Holding Grounds, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. M. The Simulator Shall Provide Capabilities For Realistically Simulate The Function Of Mooring And Tug Lines And How Each Line Functions As Part Of An Overall System Taking Into Account The Capacities, Safe Working Loads, And Breaking Strengths Of Mooring Equipment Including Mooring Wires, Synthetic And Fiber Lines, Winches, Anchor Windlasses, Capstans, Bitts, Chocks And Bollards. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: N. The Own Ship Model Shall Realistically Simulate Hydrodynamics In Interaction With Solid Ice Edge. O. The Own Ship Model Shall Realistically Simulate Hydrodynamics And Ice Pressure In Interaction With Solid And Packed Ice. Ship Motion In Solid Ice Should Affect At Least Ship Speed And Turning Radius. P. The Own Ship Model Shall Realistically Simulate The Effects Of Reduced Stability As A Consequence Of Ice Accretion. Q. It Shall Be Possible To Simulate The Effect Of The Following Ice Conditions With Variations: - Ice Type - Ice Concentration - Ice Thickness. R. It Shall Be Possible To Realistically Simulate The Towing Of Ownship – Ownship, And Own Ship Target Ship And Target Ownship. It Shall Be Possible To Introduce Different Towing Gear Like Rope Or Steel Wire With Different Strength And Elasticity, Forward, Stern And Side Towing. S. It Shall Be Possible To Realistically Simulate The Interaction Between The Ships Propeller Wash And The Ice. T. It Shall Be Possible To Realistically Simulate Ice Drift. U. The Simulator Shall Be Equipped With Iceberg Targets Of At Least Six Different Sizes Including Realistic Underwater Bodies Which Interacts With The Sea Bottom. The Icebergs Should Be Visible On The Ship's Radar. V. Motion Through Ice Hummocks Should Be Simulated Realistically Considering Ship Icebreaking Capabilities And Affect Ship's Speed, Roll And Pitch. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation System: W. The Integrated Navigation System Should Combine Process And Evaluate Data From All Sensors In Use. The Integrity Of Data From Different Sensors Should Be Evaluated Prior To Distribution. X. The Integrated Navigation System Shall Ensure That The Different Types Of Information Are Distributed To The Relevant Parts Of The System, Applying A Consistent Common Reference System For All Types Of Information. Y. The Integrated Navigation System Shall Provide Information On Position, Speed, Heading, And Time. Z. The Integrated Navigation System Shall Be Able To Automatically, Continually And Graphically Indicate The Ship's Position, Speed And Heading And, Where Available, Depth In Relation To The Planned Route As Well As To Known And Detected Hazards. Aa. The Integrated Navigation System Shall, In Addition, Provide Means To Automatically Control Heading, Track Or Speed, And Monitor The Performance And Status Of These Controls. Bb. Alarms Shall Be Displayed So That The Alarm Reason And The Resulting Functional Restrictions Can Be Easily Understood. 3.3 Operating Environment The Bridge Simulator Shall Exhibit The Following Operating Environment: A. The Simulator Shall Be Able To Present Different Types Of Target Ships, Each Equipped With A Mathematical Model, Which Accounts For Motion, Drift And Steering Angles According To Forces Induced By Current, Wind Or Wave. B. The Targets Shall Be Equipped With Navigational And Signal-lights, Shapes, And Sound Signals, According To Rules Of The Road. The Signals Shall Be Individually Controlled By The Instructor, And The Sound Signals Shall Be Directional And Fade With Range. Each Ship Shall Have An Aspect Recognizable At A Distance Of 6 Nautical Miles In Clear Weather. A Ship Underway Shall Provide Relevant Bow- And Stern Wave. C. The Simulator Shall Be Equipped With Targets Enabling Search And Rescuing Persons From The Sea, Assisting A Ship In Distress And Responding To Emergencies Which Arise In Port. Such Targets Shall At Least Be: · Rocket Parachute Flares · Hand Flares · Buoyant Smoke Signals · Sart (search And Rescue Transponder) · Satellite Epirb (emergency Position Indicating Radio Beacon) · Lifeboat · Life Raft · Rescue Helicopter · Rescue Aircraft · People In Water. D. The Simulator Shall Be Able To Present At Least 20 Target Ships At The Same Time, Where The Instructor Shall Be Able To Programme Voyage Routes For Each Target Ship Individually. (see Stcw Section A-1/12.4.3) E. The Simulator Shall Provide A Realistic Visual Scenario By Day, Dusk Or By Night, Including Variable Meteorological Visibility, Changing In Time. It Shall Be Possible To Create A Range Of Visual Conditions, From Dense Fog To Clear Conditions. F. The Visual System And/or A Motion Platform Shall Replicate Movements Of Own Ship According To 6 Degrees Of Freedom. G. The Projection Of The View Shall Be Placed At Such A Distance And In Such A Manner From The Bridge Windows That Accurate Visual Bearings May Be Taken To Objects In The Scene. It Shall Be Possible To Use Binocular Systems For Observations. H. The Visual System Shall Present The Outside World By A View Around The Horizon (360°). The Horizontal Field Of View May Be Obtained By A View Of 270° And Where The Rest Of The Horizon May Be Panned (to Move The “camera”). (applicable Only To Full Mission Bridge Station With 270° Horizontal Display) I. The Visual System Shall Present The Outside World By A View Of At Least 120° Horizontal Field Of View. In Addition, At Least The Horizon From 120° Port To 120° Starboard Shall Be Able To Be Visualised By Any Method. (applicable Only To Mini Bridge Station With 120° Horizontal Display). J. The Visual System Shall Present A Vertical View From The Workstations For Navigation, Traffic Surveillance And Manoeuvring Enabling The Navigator To Detect And Monitor Objects Visually On The Sea Surface Up To The Horizon Within The Required Horizontal Field Of View When The Ship Is Pitching And Rolling. In Addition, By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Mooring Operations. K. The Visual System Shall Present All Navigational Marks According To Charts Used. L. The Visual System Shall Show Objects With Sufficient Realism (detailed Enough To Be Recognized As In Real Life). M. The Visual System Shall Show Mooring And Towing Lines With Sufficient Realism In Accordance With The Forces Effecting The Tension. N. The Visual System Shall Provide A Realistic Set Of Bow Wave, Sea Spray And Wakes In Accordance With Ships Power Output, Speed And Weather Conditions. O. The Visual System Shall Provide A Realistic Set Of Flue Gas Emission And Waving Flag Effect In Accordance With Ships Power Output, Speed And Weather Conditions. P. The Simulator Shall Be Capable Of Providing Environmental Sound According To Conditions Simulated. Q. The Navigated Waters Shall Include A Current Pattern, Changeable In Time, According To The Charts Used. Tidal Waters Shall Be Reflected. R. The Simulation Shall Include The Depth According To Charts Used, Reflecting Water Level According To Tidal Water Situation. S. The Simulator Shall Provide At Least Two Different Wave Spectra, Variable In Direction Height And Period. T. The Visual System Shall Provide A Realistic Set Of Wind Waves Including White Caps According To The Beaufort Wind Force Scale. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: U. The Visual System Shall Be Capable Of Showing Concentrations Of Solid And Broken Ice Of Different Thickness. V. The Visual System Shall Be Capable Of Showing The Result Of Icebreaking Including Opening, Twin Breaking And Compacting Channel. W. The Visual System Shall Be Capable Of Showing The Effects Of Searchlight. X. The Visual System Shall Be Capable Of Showing The Effects Of The Ice Accretion To The Own Ship Model. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Y. There Shall Be A Field Of View Around The Vessel Of 360° Obtained By An Observer Moving Within The Confines Of The Wheelhouse Or May Be Panned (to Move The Camera). 4. Hardware Requirements 1 Set 4.1 Full Mission Bridge Simulator (horizon Field View Of 270 Degrees) A. Steel Fabrication Of Main Bridge Consoles Consisting Of: I. Conning/maneuvering Console Ii. Radar Console Iii. Ecdis Console Iv. Bearing Console V. Navigation Aid Equipment Console Vi. Gmdss Console Vii. Steering Stand/console Viii. Chart Table Ix. Overhead Panel X. Gyro Repeater With Pelorus Stand Xi. Binoculars Xii. The Console Must Made Of Steel W/ Handrails B. Visual Specification (minimum Requirements) I. 9x 70” Visual Screens Led Backlit 1. Pc Visual Channel 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Hdmi Cable 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator C. 1x Conning Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) 8. Instrument Adds On Conning Console. D. 2x Ecdis Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) E. 2x Radar / Arpa Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) F. Binocular And Instrument (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2. Ssd 4. Rtx 4070 Or Higher 5. Keyboard/mouse 6. 2x 24" Monitor 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 8. Console Made Of Steel (tct 0.8 Mm To 2 Mm) G. Overhead Panel Display 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. At Least 1width And 0.4height 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator H. Radar/arpa I. Radar/arpa Keyboard (1 Set) Specifications: 1. Usb Interface 2. Console Mount Type I. Handset I. Handset Includes: 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box J. 1x Chart Table Console 1300mm X 1312mm (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Parallel Ruler Iii. 1x One-hand Compass Divider Steel Iv. 10x Plotting Triangle With Handle V. 1x Deck Log Book Vi. 1x Night Order Book Vii. 1x Bell Book Viii. 1x Chronometer Ix. Admiralty Paper Charts Related To Installed Maps In Simulator K. Gyro Repeater With Pelorus Stand 1. Bearing Repeater Compass 2. Pelorus Stand 3. Power: 24vd 4. Signal: Rs422 Nmea L. Weather Instruments 1. 1x Ships Clock 2. 1x Aneroid Barometer 3. 1x Hygrometer. M. Speaker With Subwoofer I. Channel Sound System Specification: 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 450watts Speaker With Subwoofer 4. Port: Mini Jack 7 Sets 4.2 Mini Bridge Simulator (horizon Field View Of 120 Degrees) A. Consoles Made In Formica Laminated Board Fabrication Of Main Bridge Consoles Consisting Of: I. Conning Console Ii. Radar Console Iii. Ecdis Console Iv. Maneuvering Console V. Chart Table With Gooseneck Dimming Light B. Mini Bridge Desktop Station (bridge Image Generator Computer For Visual, Conning, Radar, Maneuvering And Overhead Display) I. 3x 45” 4k Display For Visual (minimum Requirements) Ii. 1x Computer (minimum Requirements) 1. 256 M.2 Ssd 2. Rtx 4070 Or Higher 3. 1 X Keyboard/mouse 4. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iii. 1 X Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Keyboard/mouse 5. 24” Monitor 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iv. 1 X Overhead Panel Display V. 1 X Speakers (minimum Requirements) 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 150 Watts Speaker With Subwoofer 4. Port: Mini Jack Vi. 1 X Goose Neck Microphone Vii. 1 X Set Desktop Instrument Console Including: 1. Steering System / Autopilot / Nfu 2. Steering Wheel Viii. Dual Telegraph 1. 1 X Console Tables 2. 1 X Handheld Uhf Equipment 3. 1 X Console Made In Formica Laminated Board (tct 3/4 Inches) Ix. Chart Table And Plotting Aids (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 1x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator X. 1x Parallel Ruler Xi. 1x One-hand Compass Divider Steel Xii. 1x Plotting Triangle With Handle Xiii. 1x Chart Table At Least 1000mm X 700mm Xiv. 1x Deck Log Book Xv. 1x Night Order Book Xvi. 1x Bell Book Xvii. 1x Chronometer 1 Set 4.3 Bridge Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Handset 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box Iii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iv. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel V. 1x Drone View Monitor W/ Smart Tv 55” Tv Led (environment View Of Instructor) Vi. 1x Smart Tv 55” Tv Led For Cctv Vii. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Viii. Instructor Station Table Specification: Ix. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard X. Intercom Telephone / Public Announcement System Xi. 9x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Xii. 1x Ergodynamic Chair Xiii. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Bridge Simulator Scenario Development Station B. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations. I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Iii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Bridge Simulator The Full Mission Bridge Simulator Shall Have The Following Software And Controls For The Following Workstations: A. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Ecdis Slave Software · One (1) Conning Display Software · One (1) Radar/arpa 3cm · One (1) Radar/arpa 10cm · Nine (9) Realistic Visualization Software With 270° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · Two (2) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Gyro Repeater/pelorus Stand That Can Display Magnetic And Gyro Compass · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light B. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) – Track Control/auto Navigation C. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer · Weather Facsimile D. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.2 Mini Bridge Simulator The Mini Bridge Simulators Shall Have Each Of The Following Software And Controls For The Following Workstations: E. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Conning Display Software · One (1) Radar/arpa Interchangeable To 3cm & 10cm · Three (3) Realistic Visualization Software With 120° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · One (1) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Vdr Remote Alarm Panel · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light F. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) G. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer H. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.3 Instructor Station 1. The Instructor Workstation Is An Integral Part Of The Simulator And Is Designed To Control The Training Complex, Design (develop) Exercises, Perform Exercises In Real Time, Control Exercise Performance By Trainees, Change Environmental Conditions And Sailing Circumstances, As Well As Enter Own Ship Failure Variables, Document, And Archive The Position And Activity Of The Ship Involved In The Exercise. The Instructor Station Software Should Contain Navigation Areas As Well As Sub-tasks For Each Area, Allowing The Control Of All Active Vessels And Target Ships. 2. Navigation Instructor Software Includes: · Navigation Instructor · Evaluation And Assessment · Tug And Mooring · Radar/arpa · Electronic Navigational Chart: · Bird Eye Of Instructor · Debriefing System 3. Simulator Session(s) Control: • Exercise(s) Start, Pause, Re-start After The Pause, Stop On Bridge(s); • Setting The Initial Position For Own Ships; • Entering Faults Of Navigation Systems, Steering Gear, Propulsion Plant, Fire And General Alarm; • Ability To Set Faults Of Navigational Equipment; • Pulling Apart Ships That Have Collided Or Run Aground; • Control Of Target Vessels, Hoisting Flags Of The International Code Of Signals, Turning Their Sound Signals On And Turning Their Lights On/off; 4. The Software Modules Should Provide A Possibility To Flexibly Configure The Required Bridge Configuration. General: · An Integrated Application For Exercise Editing, Conducting And Debriefing; · Highly Accurate Data Representation Based On Vector Diagrams (ability To Automatically Load All Diagrams Related To The Selected Game Area); · Tools For Creating Exercises And Automatic Competency Assessment Scenarios; · Displaying Of The Actual Ship Contours; · Display Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamps; · Using The Mouse Wheel For Chart Scaling; · Control Of Simulator Session(s); · Continuous Automatic Recording Of Data During Exercise (main, Audio And Video Log Files); · Real Time, Slow Time, And Fast Time Modes; · Ability To Display And Print A New Pilot Card And A Table Of Maneuvering Characteristics Of The Ship; · Setting Parameters And Faults Of Navigation Equipment: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; · Setting Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases (ecdis); · Working With Measuring Tools: - Ability To Set Erbl; - Ability To Attach, Move Or Delete Erbl During An Exercise; 9. Ability To Attach Sart To The Life Raft; 5. Ability To Move Own Ship During Exercise Without Grounding Or Collision; 6. Ability To Apply Virtual Tug Force To 8 Points Of The Vessel’s Hull In Any Direction; 7. Display Of Actual Ship's Contours; 8. Continuous Display Of Parameters Of Vessel Movement And Environment Conditions: Course And Speed Of The Vessel, Course Over The Ground, Transversal Component Of Speed On The Bow And On The Stern, Gyro Heading, Rate Of Turn, Speed And Direction Of The Current And Wind, Height And Direction Of A Wave, Depth; 9. Independent Instructor Control For Wind And Swell Components Of The Wave; 10. Ability To Set Sea State Spectrum: · Pierson-moskowitz; · Phillips; · Ittc (international Towing Tank Conference); · Jonswap (joint North Sea Wave Project); · User. 11. Ability To Exclude Hydrodynamic Interaction With Mooring Walls In The Required Area; 12. Ability To Create A Template Containing A Set Of Objects (ships), Save And Use This Template In Other Exercises; 13. Ability To Save Environment Settings As A Template And Load A Previously Saved Template In Any Exercise And Area; 14. Mooring Operations: · Ability To Set The Rope Material; · Ability To Set The Initial State Of The Mooring Winch (render, Slack Away, Stop); · Ability To Set Mooring Winch Parameters (speed, Pulling Force, Holding Force); · Ability To Operate The Mooring Winch At The Instructor Workplace. 15. Anchor Operations: · Ability To Set User Ground Type With Required Anchor Holding Force Coefficients; · Display Of Anchor Position On The Instructor's Chart On The Ground. 16. Control Of Navigational Lights And Shapes: · Ability To Control The Navigational Lights; · Ability To Switch On/off Deck Lights On Target Ships. 17. Loading/discharging Of Own Ship During Exercises; 18. Weather Conditions Manager: · Ability To Set Predefined Weather Conditions By Beaufort Number (wind, Wave, Whitecaps And Foam, 3d Clouds, Cloud Layer, Visibility) On The Fly; · Ability To Set Customized Weather Conditions; · Visual Effects: Rain And Snow (low, Medium, High), Lightning, Reflection, Translucency, Sea With White Caps, Foam, Splashes, Bow-wave; · Separate Settings For Wind Wave And Swell; · Manual Control Of Wind Direction And Strength; · Adjustment Of Atmospheric Parameters – Temperature, Humidity, Pressure; · Ability To Use Thunderstorm, Precipitation; · Automatic Calculation Of The Position Of The Sun, Moon, Major Stars (up To 100) And Constellations, The Angle And Phase Of The Moon; · Ability To Set Wave Spectrum Type: Pierson-moskowitz; Jonswap (joint North Sea Wave Project); Phillips; User-defined; · Ability To Use Thunderstorm, Precipitation. 19. Rcc, Ship And Coast Stating Assignment; 20. Log Module With Possibility To Print Out And Create Archives; 21. Window For Listening/monitoring Of The Radiotelephone Traffic Including Possibilities To Interfere With Radiotelephone Traffic; 22. Ability To Introduce Background Noise From A List And Instrument Faults To The Trainee Stations. 23. Ability To Change Names, Call Signs, Mmsi, Telex Numbers And Inmarsat Mobile Numbers Of All Emulated Ship Stations And Coast Station According To The Needs Of Different Exercises; 24. Electronic Chart With Vessel Position Indication And The Ability To Change Position, Course And Speed; 25. Ability To Display And Instantly Change Trainee Station Positions On The Electronic Map For Search And Rescue (sar) Exercises; 26. Full Monitoring Of Any Trainee Workstation – The Ability To Monitor The Status Of Each Gmdss Unit And Listen To The Radio Traffic Of Each Trainee Station; 27. Connection To An External Printer; 28. Connection To An Active Speaker For Simultaneous Viewing Of Channels; 29. Providing Functions Of A Coast Telex Or Telephone Subscriber, Coast Radio Station And Rcc Operator From The Log Window; 30. Status Window For All Instruments At Any Workstation; 31. Ability To Log Communication And Trainee Actions For Playback And Later Review; 32. Database Of Coastal Stations, Navtex And Msi Stations And Inmarsat Shore-based Stations Plotted On The Chart; 33. Information About The Gmdss Sea Areas On The Chart; 34. Approximate Estimation Of Radio Wave Propagation In The Selected Frequency Range; 35. Evaluation And Assessment Module; 36. Navtex Functionality: · Ability To Send Navtex Messages On Behalf Of A Navtex Station; · Ability To Edit And Use The Navtex Station Used-defined List; · Ability To Save And Use Navtex Message Templates. 37. “intercom” Panel. To Monitor Intercom Communication, Execute Voice Messages From The Instructor's Side. 38. Vhf Radio Station Module. To Monitor Vhf Communication, Send Voice Messages From The Instructor’s Side, Play Pre-recorded *.wav Files. 39. Coastal Radio Station Module. Screen Layout: 40. Use Of The Mouse Wheel For Chart Centering And Scaling; 41. On-screen Display Of Mooring Walls And Piers; 42. On-screen Display Of Actual Contours Of Any Ship; 43. On-screen Display Of The Object’s Route Line And Its Actual Track; 44. On-screen Display Of The True And Relative Speed Vectors; 45. Selectable Display Mode: True Motion, Relative Motion, Course Up Or North Up; 46. Display Of Prompt And Other Information In The Status Bar: · Bearing And Distance From The Current Cursor On-chart Position To The Reference Point; · Coordinates Of The Current Cursor On-chart Position; · Depth In The Current Cursor Position; · Current Exercise Time (absolute And Relative). 47. Displaying Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamp; 48. Displaying Of Walls And Piers; 49. Use Of A Mouse Wheel For Chart Centering And Scaling; 50. User Configurable Workplace; 51. Different Panels For The Control And Monitoring Of The Exercise Fulfillment: · Reports Panel – To Form And Print Exercise Fulfillment Reports; · Ship Info Panel – To Display Courses, Longitudinal And Transverse Speeds, Rates Of Turn For All The Ships Involved In The Exercise. · Evaluation And Assessment Module Panel; · Target Panel – To Control Vessel Target And Flight And Sar Objects; · Objects Panel – To Promptly Select An Object On The Chart From The List Of All The Objects Available In The Exercise; · Flags Panel – To Hoist/lower Ics Flag Signals On Any Of The Ships, Including Ability To Set And Keep Flag Templates · Events Panel – For The Automatic Recording Of Any Important Events Related To The Incorrect Trainee Actions; · Flash Light Panel – To Send Light Signals From Target Vessels, Including Automated Translation Into Morse Code; · Magnetic Deviation Panel – To Configure The Magnetic Deviation Panel For The Vessels, Participating In The Exercise, Save The Panel And Apply Desired Template To Any Own Vessel, Print The Magnetic Deviation Table; · Procedural Alarms Panel – For Defining User Set Of Alarm For Dedicated Vessels. 52. Setting Navigational Equipment Parameters And Faults: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; 53. Setting The Exercise Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases; 54. Observing Own Ships And Targets On The Chart: Ship Info Panel, Cpatcpa Panel, Events Panel; 55. Control Of Own Ships And Targets On The Chart: Direct Control Of Steering And Propulsion Systems, Autopilot, Mooring Lines, Anchors; 56. Setting Faults Of Navigational Equipment, Steering And Propulsion System, Fire And General Alarms; 57. Continuous Data Logging During Exercises; 58. Playback Of Recorded Exercises In Real And Fast-time Modes; 59. Performing Preliminary Exercises On The Map To Check Their Suitability For Training On The Simulator; 60. Distress Signals (flare, Smoke Signals, Dye Markers); 61. Adding New Target Ships; 62. Changing Weather Conditions; 63. Moving Buoys, Turning Off Lights On Them And Hiding Them On Both The Visualization System And Radar; 64. Control Of Automatic Tugboats On Commands From The Bridge Or From The Instructor; 65. Generating And Printing Exercise Reports 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section A 5.5.3) B. Full Mission Engine Room Simulator (fmers) And Mini Er Stations’ Features And Applications, Major Components And Engine Room Simulator Performance Standards 1. Major Components The Full Mission Engine Simulators That Can Be Integrated With Bridge Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Engine Room Station (class A Configuration) B. Ten (10) Mini Engine Room Stations (class B Configuration) C. One (1) Server Station D. One (1) Instructor Station E. One (1) Simulator Scenario Development Station F. One (1) Briefing/ Debriefing Station 2. Features And Applications 2.1 The Man Electronic Engine Model Simulates A Suez Max Crude Oil Carrier With A Man Slow Speed Turbo Charged Diesel Engine As Propulsion Unit Modeled With Fixed Propeller. The Main Engine Models Respond Dynamically To Variations In Operation And Conditions Of The Ship Model, And The Ship Models Have Mutual Responses To The Main Engine Models. The Model Is Based On Real Engine Data That Makes The Dynamic Behavior Of The Simulator Close To Real Engine Response. In Addition To The Man Engine, The Vessel Has An Electrical Power Plant Including Three 1125 Kva Diesel Generators And One 250 Kva Emergency Generator. The Steam Plant Includes Two D-type Steam Boilers, Based On Alfa Laval And One Composite Boiler (aalborg), 3 Cargo Turbines, Condensing And Feed Water Systems. Control Room Operator Station, Bridge And Steering Panels Are Included. The System Shall Also Be Connected To The High Voltage Engine Simulator. 2.2 The Simulator Models Complies With The Requirements In The Stcw Convention, Regulation 1/12 And Fulfill The Standards Of An Internationally Recognized Classification Society For Maritime Simulator Systems. 2.3 The Engine Model Main Specifications High Fidelity Engine Room Systems Include: - Sea & Lt/ht Fresh Water Systems, Incl. Fw Generator - Electrical Power Plant, Incl. Diesel Generators And Power Management - Start & Service Air Compressors, Incl. Compressor Intermediate Coolers And Emergency Compressor - Integrated Automation System, Incl. Vessel Performance Monitor - Steam Plant Incl. D-type Oil Fired Boilers And Combined Exhaust/oil Fired Boiler - Diesel/heavy Fuel/oil Systems, Incl. Hfo, Lshfo And Mdo Tanks, Separators, Viscometers - Lubricating Oil Systems, Incl. Separator - Stern Tube Systems - Steering Gear - Main Engine Control System (man) - Main Engine Remote Control System (ac 600) - Main Engine Maneuvering System - Main Engine Hydraulic Oil System - Main Engine Hydraulic Cylinder Units System - Cylinder Indication Diagrams - Air Ventilation System - Bilge Wells & Bilge Separator - Sewage Treatment Plant - Incinerator Plant - Inert Gas System - Ballast System - Refrigeration System - Ship Loading System - Fire Detection System - Fire Fighting System - Remote Co2 Release, Emergency Stops And Quick Release Valves - Emission Control System (water Scrubbing And Me Low Nox Mode) 2.4 The Engine Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate: · Table A-iii/1.1 – Maintain Safe Engineering Watch · Table A-iii/1.3 – Used Of Internal Communication Systems · Table A-iii/1.4 – Operate Main And Auxiliary Machinery And Associated Controls · Table A-iii/1.5 – Operate Fuel, Lubrication, Ballast And Other Pumping Systems And Associated Control Systems · Table A-iii/1.6 – Operate Electrical, Electronic And Control Systems · Table A-iii/1.7 – Maintenance And Repair Of Electrical And Electronic Equipment · Table A-iii/1.11 – Maintain Seaworthiness Of The Ship 2.5 Interface To Engine Room High Voltage System - The Engine Room Model Will Be Interfaced To A Corresponding High Voltage Simulator And Gas Turbine Installed In The Academy. 3. Engine Room Simulator Performance Standards 3.1 Physical Realism The Engine Simulator Stations Shall Have The Following Physical Realism: A. Equipment And Consoles Shall Be Installed, Mounted, And Arranged In A Ship-like Manner B. The Control Room Consoles Shall Include Control And Monitoring Of The Main Engine, Auxiliary Engines And Electrical Power Generation, Steam Boiler, Pump, Compressors And All Other Alarms. C. The Remote Monitoring And Control Systems Shall Be In Compliance With The Functional Requirements Of The Classification Societies For Periodically Unattended Machinery Spaces. D. The Main Engine Remote Control Console Shall Include Command Functions And Status Indication Normally Found On Board Ships. E. The Electric Power Generation Shall Be Under Automatic Or Manual Control. Such System Should Be Able To Constantly Monitor Demand And Supply. When Deviation From Pre-set Limits Arises, The System Should Be Able To Act In Order To Normalize The Situation. The System Shall Also Perform Continuous Control Of The Frequency And Load Sharing. F. The Electric Power Supply System Shall Be Operated Either From The Switchboard Or The Power Management System. - Remote Start/stop Of Auxiliary Diesel Generators - Operation For Shaft Generator - Connect/ Disconnect Of All Generators - Automatic And Priority Selection - Non-essential Systems Trip - Constant Frequency Mode - Different Control Modes Of Load Sharing G. The Main Switchboard Shall Be A Full Scale Model Of A Typical Switchboard, And Comprise The Necessary Controls And Indicators Usually Available Of Real Generators. H. The Remote Control And Automation System Must Include Control Of The Following Equipment: - Me Lubricating Oil Pumps - Me Fresh Water Cooling Pumps - Me Sea Water Cooling Pumps - Me Auxiliary Blowers - Fuel Oil System And Pumps - Air Compressors - Steering Gear Pumps - Fire Pump Each Of The Above Individual Units Shall Allow Manual Start And Stop From The Control Room Consoles. It Shall Also Be Possible To Use Automatic Start And Stop Where Applicable. I. The Alarm Monitoring System Shall Consist Of A Typical Shipboard Alarm System. J. An Alarm Shall Be Announced By Sound And By Flashing Light In The Control Room. K. A Printer Or A Computer In The Engine Room Control Shall Be Used As An Alarm Log And Event Log. L. “dead Man Alarm System” The Simulator Shall Have The Following Additional Requirements For Low Speed Engine: M. The Simulated Engine Room Shall As A Minimum Reflect Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Low Speed Engine: - Main Engine Including Turbocharger System - 2 Auxiliary Diesel Generators - Lubrication Oil Separator - Steering Gear System - Fire Pump - Shaft Generator - Cooling Water System Including Freshwater Generation System - Turbo Generator - Fuel Oil Bunkering System - Fuel Oil Settling And Service Systems - 2 Heavy Fuel Oil Separators - 1 Diesel Oil Separator - Steam Generation Plant Including Exhaust And Oil-fired Boilers - Diesel Oil And Heavy Fuel Oil Supply To Main And Auxiliary Engines - Main Engine Operation From Engine Room, Engine Control Room And Bridge - Turbocharger System - Air Ventilation System For Engine And Control Room - Bilge Water System Including Oily Water Treatment Systems - Stern Tube System - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall Have The Following Additional Requirements For Medium And High Speed Engine: N. The Simulated Engine Room Shall Consist Of Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Medium And High Speed Engine: - One Or More Main Engines - Main Sw System - 2 Auxiliary Engines - Fuel Oil Tanks - Fuel Oil Separator - Lubrication Oil Separator - Main Engine(s), Including: • Fresh Water System • Lubrication System • Turbocharger System • Me Sw System - Reduction Gear System - Controllable Propeller Pitch Were Applicable - Steam Generation System As Applicable - Freshwater Generator - Bilge Wells And Bilge Separation System - 2 Air Compressors - Steering Gear System - Fire Pump - Electrical Power Plant - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall At Least Have The Following Additional Requirements For Machinery Spaces: O. The Simulated Machinery Spaces Shall At Least Include One Dedicated Room For This Purpose. P. At Least The Following Main Components Of The Machinery Spaces Shall Be Graphically Presented Or Represented By Mock-ups Or In Realistic Visualization (to Illustrate Physical Presence) In The Simulated Machinery Spaces: - Main Engine - Auxiliary Diesel Generators - Steam Boiler - Fire Pump Q. The Facilities For Local Operation In The Simulated Machinery Spaces Shall Consist Of Local Operating Stations For Each System. Each Station Shall Be Furnished With Start/stop (open/closed) Buttons And Status Lights, Various Numbers Of Pressure -, Temperature Indicators, Etc. The Local Operating Stations Shall At Least Give Means To Operate The Following: - Main Engine (me) - Me Lubricating Oil Systems Including Separator - Me Fresh Water Cooling System - Me Sea Water Cooling System - Me Auxiliary Blowers - 2 Auxiliary Diesel Generators - Steam Boiler - Fuel Oil System (diesel And Heavy Fuel Oil) Including Separator - 2 Air Compressors - Steering Gear System - Bilge Water System - Fire Pump R. All Valves Typically Associated With The Operation Of Above Machinery May Be Operated At The Computer Screen In A 3d Visual Form Or Mouse Operated By The Candidate. S. Internal Communication System. 3.2 Behavioral Realism The Engine Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulator Models Shall Be Able To Replicate The Dynamic Behaviour Of The Machinery Systems And All Its Visual Parameters As Well As The Interactions Between The Sub-systems. B. The Simulator Models Shall Simulate The Engine Room Components With Their Procedures, As Well As Modelled Controller Systems (sensors, Controllers, Actuators, And Valves) Connected To The Processes. C. When Simulating Real Equipment The Behaviour Of Such Simulated Equipment Should Behave As Identical Aw Possible As The Original. Critical Parameters Of The Behaviour Shall Be Documented D. The Simulator Model Shall Make Applicable Controllers Available And Adjustable With Regards To Pid (proportional-integral-derivative Controller) Parameters. E. The Simulator Model Shall Provide Facilities To Allow The Injection And Resetting Of Malfunctions At Appropriate Times During Operation As Necessary. F. It Shall Be Possible To Simulate Change In Seawater Temperature And Demonstrate How This Affects The Complete Simulation Model. G. It Shall Be Possible To Simulate A Change In Air Temperature And Demonstrate How This Affects The Complete Simulation Model. H. The Simulator Shall Have All Heat Exchangers Available And Adjustable With Regards To Their Parameters (heat-transfer Factor, Heat Dissipation Are Etc.) I. The Simulator Shall Make All Pumps Available And Adjustable With Regards To Their Parameters (pump Capacity, Wear, Etc.) J. It Shall Be Possible To Demonstrate Systematically The Tests That Are Made On The Ums (unmanned Machinery Space) Alarm System. K. It Shall Be Possible To Simulate Auto Slow-down And Emergency Shut Down L. It Shall Be Possible To Simulate Safe Methods To Test Inert Gas Generator (ig) Alarms And Control. M. It Shall Be Possible To Simulate Testing Of The 24v D.c. Power Supply To The Navigation, Communication And Engine Room Control Console In Event Of Power Failure. N. It Shall Be Possible To Simulate Safe Method Of Testing The Insulation For Rotor And Stator. O. It Shall Be Possible To Simulate Of Reading A Power Factor Meter With Reference To Four Segments P. It Shall Be Possible To Simulate Testing Of The Devices And Relays Provided For Generator Protection Q. It Shall Be Possible To Simulate Tests Related To Avr (automatic Voltage Regulator) R. It Shall Be Possible To Simulate Methods Of Cooling And Checking Of Air Gap S. It Shall Be Possible To Simulate The Precautionary Measures When Megger Testing The Rotor Of A Brushless Generator T. It Shall Be Possible To Simulate Routine Tests On An Emergency Generator U. It Shall Be Possible To Simulate How A Generator Circuit Breaker Ocr (over Current Relay) Is Set And Tested. V. It Shall Be Possible To Simulate The Process Of Connecting A Shaft Generator On Load And Specific Conditions For Taking Off Load. W. It Shall Be Possible To Simulate The Procedure For Megger Testing A High Voltage System X. It Shall Be Possible To Simulate The Maintenance And Checks Carried Out On An Acb (air Circuit Breaker) Y. It Shall Be Possible To Simulate Recovery From “dead Ship” Condition. Z. It Shall Be Possible To Simulate Methods Test The “preferential Tripping Sequence” Aa. It Shall Be Possible To Simulate Methods To Tests Auto “cut In” Of Stand Fault Bb. It Shall Be Possible To Simulate Methods Of Diagnosing Single Phasing Fault. Cc. It Shall Be Possible To Simulate Operation And Maintenance Of Variable Speed Motor Starters. Dd. It Shall Be Possible To Simulate Operational Test Methods Of Oily Water Separator Monitors Ee. It Shall Be Possible To Simulate Test Methods For Level Alarms And Function Tests Of Bilge Pumping Arrangement Ff. It Shall Be Possible To Simulate The Functional Tests Of Odmcs (oil Discharge Monitoring And Control System) And Odme (oil Discharge Monitoring Equipment) System Gg. It Shall Be Possible To Simulate The Function Test Of Ows (oily Water Separator) And Ppm (parts Per Million) Unit. 3.3 Operating Environment The Engine Simulator Stations Shall Have The Following Operating Environment: A. It Shall Be To Adjust The Noise Level In The Simulated Machinery Spaces Infinite From No Added Noise Up To Minimum 100 Db(a). The Noise Shall Have A Frequency Distribution Typical For Machinery Spaces. Headset Is Provided For Each Workstation. B. It Shall Be Possible To Simulate The Sea Water Temperature At Least Infinite Between +1ºc And +30 ºc C. An Alarm Can Be Heard Through Headset Of A Candidate And By Flashing Light In The Machinery Spaces 4. Hardware Requirements 1 Set 4.1 Full Mission Engine Room Simulator A. Engine Control Room Consoles I. Ecr Pump Compressor And Power Management Console 1. 1 X Console 2. 1 X Computer 3. 2 X 24 Touch Monitors Ii. Ecr2 Alarm, Monitoring And Remote-control Console: 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Iii. Ecr3 Main Engine Remote Control And Indication Console 1. 2 X Console 2. 1 X Computer 3. 3 X 24” Touch Monitors 4. 1 X Speed Set Lever For Main Engine Remote Control And 5. Indication Console 6. Dead Man Alarm (dma) 7. Engineers Reset 8. Included Power Relay To Which Illumination In Engine Control Room And Engine Room Can Be Connected, Causing Lights In The Rooms To Go Out During A Blackout To Increase Realism. Iv. Simulated Cctv Touch Monitor 1. 1 X Computer 2. 1 X 24 Monitor V. Internal Telephone At The Following Locations 1. Instructors Station 2. Engine Control Room 3. Engine Room 4. Emergency Generator Room Vi. Main Switchboard 1. 14 X Touch Screen Monitors 2. 7 X Computers 3. 1 Set Of Speakers 4. Installed In A Switchboard Manner Vii. Engine Room Equipment 1. 4 Dome Type Virtual Walkthrough 2. 4 X High Resolution Short Throw Projector 3. 4 X Computer With Graphics Card 4. 4 X Controller Viii. Local Operating Station Console 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Ix. Engine Room Sound 1. 1 X Sub Woofer 2. 4 X Satellite Speaker X. Alarm Horn And Lamp 1. 1 X Column With Lights And Sirens Xi. Emergency Generator Room 1. 1 X Dome Type Virtual Walkthrough 2. 1 X High Resolution Short Throw Projector 3. 1 X Computer With Graphics Card 4. 1 X Controller 5. With Sound System B. All Computers Must Be The Latest Generation This Includes Processors, Memory, Graphics Card And Storage. I. Monitors: Full Hd Resolution Ii. Storage: Solid-state Drive (ssd) Iii. Processor Generation: Must Be From The Latest Generation Of Processors Iv. Graphics: Integrated Graphics Dedicated Gpu If Needed. C. Touchscreens For Durability, Responsiveness, And Multi-touch Support. D. Each Computer Must Be Paired With A Ups Unit Rated For At Least 1.5 Kva And Automatic Voltage Regulation To Handle Voltage Fluctuations. E. The Engine Control Console Must Be Made From Steel W/ Handrails 10 Sets 4.2 Mini Engine Room Simulator A. 1x Computer Specification (minimum Requirement) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 256 M.2. Ssd 4. Video Card 5. Keyboard/mouse 6. 2x At Least 24" Monitor (touchscreen) 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm C. 1x Chairs 1 Set 4.3 Engine Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 3x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iii. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel Iv. 1x Smart Tv 55” Tv Led For Cctv V. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Vi. Instructor Station Table Specification: Vii. 11x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Viii. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Ix. 1x Ergodynamic Chair X. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Engine Simulator Scenario Development Station A. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 1. 1x Computer (minimum Requirements) 2. 2x 24” Monitor 3. Intel Core I5 Processor 4. 16 Gb Ram 5. 256 M.2 Ssd 6. Rtx 4070 Or Higher 7. Keyboard/mouse 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm I. Material: Formica Matt Laminate On Chipboard Ii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Engine Room Simulator 5.2 Mini Engine Room Simulator 5.3 Instructor Station 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section B 5.5.3) 1 Set C. Briefing/ Debriefing Station For Bridge And Engine A. 2x Computer (minimum Requirements) 1. 1 X Pc 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 500gb Ssd 5. Low Profile Video Card 6. 1x Keyboard/mouse 7. 1x Ups 1kva 8. 1x W/ Computer Table Size: At Least L 1700 X W 700 X H 750 Mm 9. Briefing And Debriefing Rooms With Playback Capability (playing Of Recorded Exercise And Assessment In Simulator B. 50x Chairs C. 1x Solid Round Table (at Least 6100 X 1220 Mm) (for Bridge Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) D. 1x Solid Round Table (at Least 4880 X 1220 Mm) (for Engine Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) E. 1x Smart Tv At Least 70" 4k 1. Wall Mounted. 2. 2x Hdmi 10meters F. 4x Bridge And 4x Engine) Hardware For Virtual Bridge Familiarization (minimum Requirements) 1. Display: A. Type: Lcd B. Resolution: 2064 X 2208 Per Eye C. Refresh Rate: 120 Hz D. Field Of View: E. Horizontal: 97 Degrees F. Vertical: 93 Degrees 2. Processor: A. Chipset: Qualcomm Snapdragon Xr2 Gen 2 3. Ram: 12gb 4. Storage: A. Options: 128gb, 256gb, And 512gb Variants 5. Audio: 6. Hand Tracking: Improved Hand Tracking Capability 7. Controllers: A. Type: Meta Touch Pro Controllers B. Features: Haptic Feedback, Improved Ergonomics, Rechargeable Batteries 8. Battery: A. Headset: Approximately 2-3 Hours Of Active Use B. Charging: Usb-c Fast Charging 9. Connectivity: A. Wireless: Wi-fi 6e Support B. Bluetooth: 5.2 10. Inclusions: A. Headset B. Touch Pro Controllers (pair) C. Charging Cable (usb-c) D. Power Adapter W/ Extra 1 Battery Each E. Controller Lanyards F. Glasses Spacer Ii. Add On’s: 1. 2x Strap With Battery 2. 8x Silicone Cover Face Cover 3. 4x Silicone Protective Case 4. 8x Silicone Case For Controller 5. 3 Row Vr Storage Cabinet With Lock G. The Virtual Reality Bridge Must Be Complete With Hotspots, Identification Tags And Descriptions. It Shall Also Be Available On An Offline System, Navigable. H. Playback Capability With The Following Functions: · Loading A Previously Created Exercise On A Chart Or In Engine Room; · Playing The Exercise To Explain The Task; · Uploading A Sample Log Of The Same Exercise To Explain The Correct Actions. I. Virtual Bridge Familiarization W/ Virtual Reality Device The Vr System Aims To Simulate The Overhauling Process, Enabling Immersive, Hands-on Learning And Pre-assessment Without Direct Physical Intervention On The Engine. This Approach Will Enhance Technical Skills, Reduce Risk, And Improve Efficiency In Real-world Engine Maintenance And Overhauling. The Supplier Shall Provide A Virtual Bridge And Engine With The Use Of Virtual Reality Providing The Following Visualizations: 1. Bridge Wing Equipment 2. Speaker Mic 3. Rate Of Turn 4. Engine Rpm 5. Quick Release Lifebouy 6. Remote Panel 7. Gyro Compass Repeater 8. Fire Box 9. Hatch For Maintenance 10. Thermometer Ii. Main Bridge 1. Epirb 2. Sart 3. Clear View Screen 4. Location Of Fire Extinguishers 5. Pantry With Equipment 6. Pilot Chair 7. Smoke Detectors 8. Damage Control Plans 9. Radar 1 And 2 And 3 10. Gps With Other Equipment 11. Helm Wheel 12. Indicator Control 13. Deck Light Control 14. Admiralty And Other Maritime Publications 15. Fireplan 16. Rudder Angle Indicator 17. Voice Recorder 18. Whistle Horn 19. Water Tight Door Indicators 20. Window Wipers 21. Pa Systems 22. Cargo Hold Fan Control 23. Smoke Alarm System 24. Fire Alarm System 25. General Alarm System 26. Vhf System 27. Log Books And Other Documentation 28. Ecdis Voyage Planner 29. Pressure Recorder 30. Portable Uhfs 31. Lifejackets, Rocket Flare, And Rocket Line 32. Location Of Immersion Suits 33. Barometer 34. Utc Clock 35. Radio Room Configuration 36. Posters 37. Charts 38. Compass Deck / Monkey Island 39. Radar Equipment 40. Antennas 41. Anemometer 42. And Other Equipment On The Monkey Bridge Iii. The Me-b Main Engine Vr Overhauling System Cover The Following Features Full-scale, Interactive Models Allowing For A Detailed Exploration Of All Engine Components, Including: Iv. Connection Rod & Crosshead Assembly V. Stuffing Box Assembly Vi. Piston Assembly Vii. Cylinder Liner Assembly Viii. Cylinder Cover Assembly Ix. Exhaust Valve Assembly X. The Vr Simulation Guides Users Through Disassembling, Inspecting, And Reassembling The Exhaust Valve, Focusing On Critical Tasks Like Checking Valve Seats, Spindle Condition, And Wear On Sealing Surfaces. Users Can Also Simulate Tasks Such As Lapping The Valve, Inspecting Hydraulic Actuators, And Ensuring Proper Seating Of The Valve During Reassembly. 1 Set D. Server Station For Bridge And Engine A. 2x Set Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 4x 500 Ssd 4. Keyboard/mouse 5. License Operating System B. 1x Nas And Exercise Server 1. 4 Bay Nas Disk Station Quadcore Processor 2. 4x 4 Tb Hdd C. 1x Server Rack 1. Server Rack At Least 32u 2. W/ Fan D. 1x Ups 1. 5kva (5kw) 2. Sealed Lead-acid (sla) Or Lithium-ion 3. Output Voltage: 230v Ac 4. Surge Protection 5. Stabilizes Incoming Voltage Without Switching To Battery Mode 25 Sets E. Cloud Simulator-ready Computers A. Laptop 1. 13th Gen Intel Core I5-1335u 2. 16 Gb, 2 X 8 Gb, Ddr4. 2666 Mhz 3. 512 Gb, M2, Pcie Nvme, Ssd 4. Intel Iris Xe Graphics 5. Windows 11 Pro License 6. Wi-fi 6 Wireless Lan And Bluetooth 7. Keyboard With Numeric Keypad 8. 15.6", Fhd 1920x1080, 120hz, Wva, Non-touch, Anti-glare, 250 Nit, Narrow Border, Led-backlit 9. Ports: Usb 2.0, Headset Jack, Power Jack,hdmi 1.4, Usb 3.2 Gen 1 Type-a, Usb 3.2 Gen 1 Type-c™ 10. Power Adapter: 220v Ac Input, 65w 11. Accessories: Wireless Mouse 1 Set F. Network And Cctv A. 1 X High Speed Router For Remote Support B. Network Switch 1. Network Switch Specifications Manage: 2. 4x 24 Ports 10/100/1000mbps Rj45 Ports 3. 1x 8 Ports 10/100/1000mbps Rj45 Ports C. Set Cctv Monitoring 1. 1x Nvr At Least 32 Channel 2. 20x 6 Mp Fixed Dome Network Camera With Mic 3. 3x 6tb Storage (design For Cctv) D. Network Requirements: I. 72x Lan Port Ii. 1x Lot: Of Upvc, Conduit, Pull Box, Fittings, Hanger, And Support And Other Materials If Needed. Including Utp Cat6 Shielded Pure Copper, Fiber Optic Cable, Patch Panels. Iii. Installation, Engineering Labor For Entire Project. Iv. Cable Laying, Labeling, Harnessing V. Mobilization And Di-mobilization Vi. All Cabling Will Be Endpoint At Server Room (back Of Full Mission Bridge Simulator) E. Structured Cabling Systems Standard I. Stations Must Include Lan Outlets And Patch Cords. Ii. Backbone Cabling Will Be Using The Cable Tray For Lan Distribution. Iii. Lan Outlets Must Have Network Labeling Iv. Patch Panels Are Required G. Civil Works A. Program Of Work Separate Documents (attached) Part Ii. Other General Requirements 1 Ea. Project Billboard/signboard 1 L.s Occupational Safety And Health Program 1 L.s Mobilization/demobilization Part Iii. Civil, Mechanical, Electrical, & Sanitary/plumbing Works Part A. Earthworks 1 L.s Removal Of Structures And Obstruction Part C. Finishings And Other Civil Works 179.71 M² Wall, Metal Frame, Fiber Cement Board 6mm 37.92 M² Tempered Glass Door, 12mm, Reflective 23.04 M² Aluminum Glass Window 4.05 M² Doors, Solid Panel 406.28 M² Acoustical Ceiling Panel 745.2 M² Painting Works, Masonry/concrete 4.05 M² Painting Works, Wood 48.38 M² 150mm Chb Nonload Bearing(including Reinforcing Steel) 48.38 M² Plain Cement Plaster Finish 116 M² Floor Tiles, Imo Rubber, On Finish Floor 211.6 M² Floor Tiles, Imo Rubber, On Raised Floor System Part D. Electrical 1 L.s Panelboard With Main And Branch Breakers 1 L.s Wires And Wiring Devices 1 L.s Lighting Fixtures And Lamps 1 L.s Conduit, Boxes, And Fittings 1 L.s Pole Mounted Power Transformer (oisc) 1 L.s Network Cabling Part E. Mechanical 1 L.s. Door Access And Card Reader System Part F. Simulator Equipment 1 L.s Airconditioning, Package/split Type H. Terms And Conditions 1. A 3-year Warranty For The Computer Hardware And Console Peripherals 2. All Workstations Shall Have Imo Standard Rubber Mat Flooring. 3. The Software Comes With A 3-year Warranty Inclusive Of New Updates. 4. The Project Will Be Implemented Within 150 Cd. Liquidating Damages Will Be Applicable For Any Delays. 5. A Comprehensive Guide Will Be Provided, Offering Detailed Instructions On System Operation And Maintenance Activities, Facilitating Ease Of Use And System Upkeep. 6. Onsite Training Sessions Will Be Conducted By Certified Instructors And Technical Experts, Facilitating Smooth Knowledge Transfer And Ensuring Proficient System Operation. Certificates Will Be Provided Upon Completion Of Training Sessions. 7. Structured Cabling Standards To Establish A Reliable And Efficient Network Infrastructure. 8. The Simulator Manufacturer Should Be An Iso 9001:2015 And Iso 14001:2015 Certified Business. 9. The Simulator Should Be Certified By An Internationally Recognized Classification Society And May Also Be Certified By National Authorities. 10. The Software Must Be Perpetual License. 11. The Supplier Shall Conduct An Annual Face-to-face Maintenance Session To Ensure The System's Optimal Functionality And Performance. 12. The Supplier Must Resolve Any Software Or Hardware Issues Within 2 To 5 Cd Of Their Occurrence To Minimize Downtime And Disruptions. 13. All Hardware Installations Must Adhere To Software Specifications To Guarantee Seamless Integration And Operation. 14. The Computer Hardware Supplied Must Be Sourced From Proven Technology Hardware Companies, Quality And Performance Standards To Ensure Optimal Functionality And Compatibility With The Software. 15. Bidders Are Required To Offer Continuous Retraining Sessions Free Of Charge During The Warranty Period To Ensure Users' Proficiency With The System. 16. Bidders Should Provide Manufacturer Authorization Or Exclusivity Certificate To Ensure The Authenticity And Legality Of The Supplied Products. 17. The Bidder Is Responsible For Performing A Thorough Site Inspection, And A Site Inspection Certificate Issued By The Agency Shall Be Submitted As Part Of The Eligibility Requirements. 18. The Bridge Simulator Shall Be Integrated With The Engine Simulator Ensuring Compatibility And Functionality. 19. All Simulator Stations Can Connect And Enable Them To Interact With Each Other In A Coordinated Scenario. 20. The Simulator Scenario Development Station Shall Be Capable Same As An Instructor Station Capable Of Deploying Scenarios To Other Stations. 21. All Other Simulator Specifications And Capabilities Not Indicated Herein, The Simulator Shall Comply With The Simulator Performance Standards As Required In Maritime Industry Authority (marina) Evaluation Instrument For Full Mission Bridge And Engine Simulator. 22. The Bidders Should Provide A Breakdown Of The Unit Prices Of The Major Components In The Original Of Duly Signed And Accomplished Price Schedule(s) Under Financial Component Envelope Upon Bid Submission. Furthermore, They Should Provide A More Detailed Breakdown As A Condition For Issuance Of Notice To Proceed. ~~~~nothing Follows~~~~

Details: The Local Health Authority Of Bari Needs To Acquire The Following Devices: Picc In Power Injectable Polyurethane Single-lumen 4 Fr In Sterile Set, Complete With Components For Percutaneous Procedure, Magnetic Navigation And Ecg Method. Picc In Polyurethane Power Injectable Monolume 5 Fr In Sterile Set, Complete With Components For Percutaneous Procedure, Magnetic Navigation And Ecg Method For Tip Position. Picc In Polyurethane Power Injectable Monolume 4 Fr With Proximal Valve In Sterile Set, Complete With Components For Percutaneous Procedure, Magnetic Navigation And Ecg Method Picc In Polyurethane Power Injectable Monolume 5 Fr With Proximal Valve In Sterile Set, Complete With Components For Percutaneous Procedure, Navigation Magnetic And Ecg Method Power Injectable Peripheral Venous Catheter With All-in-one Integrated Implant System. In Order To Define The Type Of Choice Of The Contractor, Pursuant To Art. 70 Of Legislative Decree. No. 36/2023, Interested Economic Operators Are Invited To Illustrate, Through A Specific Report: • The Technologies Of Their Own Production/marketing In Direct Mode (parent Company); • Sole Dealer (puglia/italy); • Resellers Throughout Italy. In The Presence Of An Equivalent Product, The Economic Operator Must Demonstrate By Any Appropriate Means The Equivalence Of The Product Offered (maximum 2 Pages), Pursuant To The Provisions Of Art. 79 Of Legislative Decree No. 36/2023 And, As Better Clarified By Annex Ii.5 Of The Aforementioned Decree, Must Also Attach Illustrative Leaflets And Technical Data Sheets Of The Device. All The Subjects Foreseen By The Art. Can Participate. 65 Of The Legislative Decree. No. 36/2023, Who Meet The Requirements To Contract With The Public Administrations Referred To In Art. 94 And Following Of The Legislative Decree. No. 36/2023. Participation In The "preliminary Market Consultation" Does Not Involve Charges Of Any Kind For The Contracting Authority And Is Aimed At Verifying Whether The System, Which The Uu.oo. In Word, It Is Provided By One Or More Economic Operators..

Details: Description Invitation To Bid For The Supply And Delivery Of One (1) Unit Motor Vehicle 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The National Expenditure Program Fy 2025 Intends To Apply The Sum Of Two Million Four Hundred Thousand Pesos (php2,400,000.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of One (1) Unit Motor Vehicle With Project Identification Number Da-rfo 1-2025-goods-007. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Early Procurement Activity (epa) Of The Above Procurement Project, In Accordance With The Provisions Under Appendix 31 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184 For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Particulars/descriptions Motor Vehicle, Pick Up Truck 4x4 With Canopy Transmission Type: Automatic Transmission Engine Size And Displacement : Minimum Of 2,500cc But Not Exceeding 3,000cc Body Type : Pick-up With Installed Canopy Canopy Specification: ̵ Custom-fit Premium Hardtop Design ̵ One-piece Construction ̵ Complete Interior Pvc Lining Or Gray Carpet To Your Choose ̵ Pop-out Style Dark Tinted Side Windows ̵ Roof Rails With 60kg Load Capacity ̵ Installation By Use Of Clamps, No Drilling Required, No Permanent Changes To Original Vehicle ̵ Outer Surface Flat And Glossy, Material And Surface Allows Easy Painting In Body Colour High Quality Gas Strut ̵ Fiber Glass Inner And Outer Shells ̵ Light Weight, Solid, Strong And Rust Free Throughout Its Lifetime ̵ Weather Resistant Design Number Of Cylinders : 4 Number Of Valves : 16 Drivetrain : Four-wheel Drive Fuel Type : Diesel Number Of Doors : 4 Emission Standard: Euro 4 Minimum Safety & Security : Driver's Airbag | Front Passenger's Airbag | Side Airbags | Curtain Airbags | Knee Airbag | Electronic Brake Distribution | Anti-lock Brake System (abs) With Electric Brake-force Distribution With Brake Assist | Immobilizer | Security Alarm | Stability Control | Electronic Door Locks | Speed Sensing Door Locks | Lane Departure Warning System | Blind-spot Detection System Features : Cruise Control | Front Parking Sensors | Rear Parking Sensors | Leather Upholstery | Push Start Button | Navigation Ready | Keyless Entry | Power Steering | Power Windows | Hill Start Assist Wheel Size : 18 Inch Alloy Air-conditioning System : Automatic Climate Control Entertainment System : Touchscreen With Am/fm Connectivity : Am/fm/bluetooth/usb/apple Carplay (wireless) /android Auto (wireless) Warranty : 3-years (100,000 Km) Inclusions And Additional Requirements: Lto Registration For The First 3 Years Provide Temporary Plate From Lto Full Tank Diesel Upon Delivery Basic Tools (jack, Tire Wrench, Early Warning Device, Etc) Ceramic Tint Provide Credit Line To Casa Service Center Within The Region Must Have Been In The Philippine Market For At Least 20 Years; With Certificate Of Dealership Or Distributorship Issued By The Manufacturer Or Distributor Delivery Schedule: Fifty (50) Calendar Days Upon Receipt Of The Notice To Proceed Drop-off Point: Department Of Agriculture - Regional Field Office 1 (da-rfo 1) Aguila Rd., Sevilla, City Of San Fernando, La Union Delivery Of The Goods Is Required Within Fifty (50) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 13 2024 To December 2, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 20 November 2024, 9:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 02 December 2024, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 02 December 2024, 9:00 Am At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. E. The Award Of Contract For Procurement Projects Undertaken Through Epa May Be Made Only Upon The Following Conditions And Shall Be In Accordance With Item 7 Of Appendix 31 Of The 2016 Revised Irr Of Ra 9184: E.1. Approval And Effectivity Of The Funding Sources, To Wit: (i) General Appropriations Act; (ii) Corporate Budget; (iii) Appropriations Ordinance; Or (iv) Loan Agreement In The Case Of Faps; Or E.2. The Reenactment Of The Previous Year’s Budget Which Constitutes The Current Year’s Authorized Budget, When Authorized By The Constitution, Law Or Rules. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ November 12, 2024 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-007

Details: Description Invitation To Bid For Procurement Of Medical Supplies –package 2 (early Procurement Activity) (epa) Ib No. 2024-11-26 (68) 1. The [adela Serra Ty Memorial Medical Center], Using A Single-year Framework Agreement, Through The [astmmc Fund] Intends To Apply The Sum Of Eighteen Million Four Hundred Fifty-two Thousand Seven Hundred Sixty-nine Pesos Only [18,452,769.00] Being The Abc To Payments Under The Contract For Each Item For The Procurement Of Medical Supplies – Package 2 (early Procurement Activity (epa)) With Ib No. 2024-11-26 (68). Bids Received In Excess Of The Total Cost Per Item Shall Be Automatically Rejected. 2. The [astmmc] Now Invites Bids For [procurement Of Medical Supplies – Package 2 (early Procurement Activity (epa)) With Ib No. 2024-11-26 (68)]. Delivery Of The Goods Is Required Within [10-15 Calendar Days] [after Issuance Of A Call-off]. Bidders Should Have Completed, Within [five Years] From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From [adela Serra Ty Memorial Medical Center] And Inspect The Bidding Documents At The Address Given Below During [8:00am To 12:00; 1:00 To 5:00pm, Monday Thru Friday]. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On [november 4 To 26, 2024] From The Given Address Below, Philgeps Website And Probac Facebook Page And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos Only [25,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In The Manner Whether It Will Be Presented In Person Or Through Electronic Means. 6. The [astmmc] Will Hold A Pre-bid Conference On [november 12, 2024] At [10:00am, Bac Conference Room, 2nd Floor, Opd Bldg., Astmmc, Tandag City, Sds]and/or Through Video Conferencing Or Webcasting Via [meet.google.com/rbu-snjw-vga].}, Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before [november 26, 2024 At 10:30am]. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On [november 26, 2024 At 10:31am] At The Given Address Below And/or Via [meet.google.com/rbu-snjw-vga]. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The [astmmc] Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: [dr. Dominador B. Toral] [bac Conference Room, 2nd Floor, Opd Bldg., Astmmc, Tandag City, Sds] [astmmcprocurement@gmail.com] [tel. No. 086-211-4306] Probac Facebook Page Https://www.facebook.com/astmmc.probac] 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps And Probac Facebook Page] 1 Absorbable Gelatin Sponge (gelfoam) 20 Jar 8,400.00 2 Abdominal Binder (post Surgical Support Belt) 150 Pc 39,600.00 3 Activated Carbon Cloth Dressings 10cmx10cm,10's 15 Box 147,000.00 4 Acid Etchant 8 Pc 4,000.00 5 Adhesive Bandage, 100% Waterproof,four-sided Adhesive Blocks Water,30's 1 Box 20,160.00 6 Anesthesia Breathing Circuit Single Limb Tubing With Inspiratory And Expiratory Hose, With Red Cap Pvc, Latex Free,non Flex Corrugated Tubing, Adult 10 Pc 8,500.00 7 Adhesive Paper Tape 2 Inch/non Woven Tape,6's 40 Box 9,520.00 8 Adhesive Foam Dressing 4"x4",10's 15 Box 57,000.00 9 Alginate Dressing 7.5cmx12cm,10's 20 Box 78,000.00 10 Alcohol Based Handscrub (isopropanol, N-propanol Mecetromium Ethylsulfate) 1000ml 70 Bottle 50,400.00 11 Antimicrobial Barrier Dressings, 5's 10 Box 180,000.00 12 Antimicrobial Gel Dressing,7's 10 Box 22,000.00 13 Armsling Medium/child 200 Pc 16,400.00 14 Antibacterial Decontaminating Mat, 90x115cm,30's/pack 15 Pack 60,000.00 15 Antimicrobial Incise Drape Size Incise Area 40cm X 42cm, Plastic,10's 3 Box 9,000.00 16 Antimicrobial Incise Drape Size Incise Area 35cm X 45cm, Plastic,10's 2 Box 5,000.00 17 Antimicrobial Incise Drape Size Incise Area 45cm X 85cm, Plastic,10's 2 Box 7,000.00 18 Antimicrobial Incise Drape Size Incise Area 30cm X 28cm, Plastic,10's 2 Box 5,000.00 19 Bag Decanter, Sterile 50 Pc 12,500.00 20 Biological Indicator For Gas Sterilizer, Compatible To Existing Hydrogen Peroxide Gas Sterilizer,50's/box 2 Box 50,000.00 21 Bipolar Shear (enseal G2) Compatible To Present Harmonic Machine 5 Pc 270,000.00 22 Blood Set 8192 Pc 1,064,960.00 23 Bonding Agent 5ml 5 Bottle 20,000.00 24 Bp Bulb With Airflow Control,air Pump, Inflation Bulb For Blood Pressure 50 Pc 12,500.00 25 Bp Cuff Adult Arm 22.6x115cm Bladder, Reusable 30 Pc 6,720.00 26 Bp Cuff Infant Arm 13.5x7cm Bladder Size Reusable 30 Pc 8,190.00 27 Bp Cuff Adult Thigh 21x38cm Bladder, Reusable 30 Pc 6,720.00 28 Bp Cuff Neonate Arm 8.5x4cm Bladder, Reusable 30 Pc 3,000.00 29 Bp Cuff Child Arm 18.3x9.5cm Bladder Reusable 30 Pc 6,720.00 30 Bp Cuff Arm Cloth, Pedia 50 Pc 8,650.00 31 Bp Cuff Arm Cloth, Neonate 50 Pc 10,700.00 32 Bp Cuff, Adult Thigh , 40-55cm 20 Pc 6,800.00 33 Breast Pump Plastic 100 Pc 17,000.00 34 Cautery Pad Pedia Compatible With The Existing Cautery Machine, With Cable 50 Pc 29,000.00 35 Cautery Pad Neonate Compatible With The Existing Cautery Machine, With Cable 50 Pc 40,000.00 36 Carbachol 100 Pc 25,000.00 37 Central Venous Catheter Triple Lumen, 5fx12"(30cm) 20 Pc 102,000.00 38 Central Venous Catheter Triple Lumen, 4fx12"(30cm) 20 Pc 102,000.00 39 Cervical Collar, Medium 50 Pc 16,500.00 40 Cervical Brush, Sterile,100's 2 Bx 2,000.00 41 Chemical Indicator For Steam Sterilization 5 Roll 30,000.00 42 Chemical Indicator Label,40m/roll, Casp 5 Roll 66,000.00 43 Chemical For Hydrogen Peroxide (plasma Sterilization) 8 Gal 48,000.00 44 Chlorhexidine 500ml 5 Bottle 6,000.00 45 Chlorhexidine Gluconate, 4% Antimicrobial For Handscrubing, 500ml 80 Bottle 161,280.00 46 Chlorhexidine Swab Stick, 3's 300 Pack 36,000.00 47 Chlorhexidine Swab, 100's 30 Box 16,200.00 48 Colostomy Bag/pouch 57mm,7's 15 Box 27,750.00 49 Colostomy Bag/pouch 60mm,6's 20 Box 37,000.00 50 Ctg Paper 122mmx100mm(compatible To Sunray Machine) (bring 1 Sample) 3pads/box 40 Box 32,000.00 51 Cutting Needle #16, 12's 3 Pack 405.00 52 Dental Prophylaxis Paste 200g 80 Pc 24,000.00 53 Dental Needle (27g/short) 50's 40 Box 26,400.00 54 Dermatome Blade Stainless Steel Sterile,10's (compatible To Dermatome Machine ) 10 Box 30,000.00 55 Disposable Saliva Ejector Tip,100's 8 Packs 1,920.00 56 Disposable Dental Bib,2ply 40 Pc 8,800.00 57 Disposable Laryngoscope Blade Mac 2 (compatible With Existing Machine 2 Pc 1,080.00 58 Disposable Laryngoscope Blade Mac 3 (compatible With Existing Machine 5 Pc 4,200.00 59 Disposable Laryngoscope Blade Mac 4 (compatible With Existing Machine 5 Pc 5,050.00 60 Disposable Needle G-18, 100's 20 Box 3,600.00 61 Disposable Needle G-23x1" 100's 20 Box 3,600.00 62 Disposable Needle G-24x1" 100's 20 Box 3,600.00 63 Disposable Needle G-25x1 1/2", 100's 20 Box 3,600.00 64 Disposable Syringe Without Needle 60cc, Luer Lock, 25's 130 Box 93,600.00 65 Disp. Patient Warming Blanket Silver 200 Pc 40,000.00 66 Double J Ureteral Stents Fr. 6 15 Pc 27,000.00 67 Ecg Paper 105mm X 20m 200 Pad 90,000.00 68 Endotracheal Tube Fr. 3.0, Uncuffed,10's 5 Box 1,550.00 69 Endotracheal Tube Fr. 2.0,cuffed,10's 5 Box 1,800.00 70 Endotracheal Tube Fr. 4.5,cuffed,10's 20 Box 7,200.00 71 Endotracheal Tube Fr. 5.0,cuffed,10's 20 Box 7,200.00 72 Endotracheal Tube Fr. 5.5,cuffed,10's 20 Box 7,200.00 73 Endotracheal Tube Fr. 6.0,cuffed,10's 30 Box 10,800.00 74 Endotracheal Tube 2.5 Right Angle,oral,10's 2 Box 9,840.00 75 Endotracheal Tube 3.0 Right Angle,oral,10's 2 Box 9,840.00 76 Endotracheal Tube 3.5 Right Angle,oral,10's 2 Box 9,840.00 77 Endotracheal Tube 4.0 Right Angle,oral,10's 2 Box 9,840.00 78 Endotracheal Tube 4.5 Right Angle,oral,10's 2 Box 12,000.00 79 Endotracheal Tube 5.0 Right Angle,oral,10's 2 Box 12,000.00 80 Endotracheal Tube 5.5 Right Angle,oral,10's 2 Box 12,000.00 81 Endotracheal Tube 6.0 Right Angle,oral,10's 2 Box 12,000.00 82 Endotracheal Tube 6.5 Right Angle,oral,10's 2 Box 12,000.00 83 Endotracheal Tube 7.0 Right Angle,oral,10's 2 Box 12,000.00 84 Endotracheal Tube 7.5 Right Angle,oral,10's 2 Box 12,000.00 85 Endotracheal Tube 8.0 Right Angle,oral,10's 2 Box 12,000.00 86 Endotracheal Tube 7.0 Armoured,oral,10's 5 Box 31,000.00 87 Endotracheal Tube Wrapped Wire Aluminum, 2.2mm, Guide Wire 20 Pc 12,000.00 88 Endotracheal Tube Wrapped Wire Aluminum, 2.5mm Guide Wire 20 Pc 12,000.00 89 Endotracheal Tube Wrapped Wire Aluminum, 3.0mm Guide Wire 20 Pc 12,000.00 90 Endotracheal Tube Wrapped Wire Aluminum, 3.5mm Guide Wire 20 Pc 12,000.00 91 Elastic Bandage 2" X 5y 1500 Roll 24,000.00 92 Elastic Bandage 3" X 5y 3500 Roll 56,000.00 93 Extension Tubing 150 Cm 100 Pc 5,000.00 94 Extension Tubing 100 Cm 200 Pc 6,000.00 95 Extension Tubing, 75 Cm 200 Pc 12,000.00 96 Eye Drape 90x90cm 200 Pc 72,000.00 97 Flat Tourniquet 500 Pc 10,000.00 98 Flowable Lightcure Composite Filling Material 10 Pc 20,000.00 99 Foley Bag Cath. 2 Way-silicone Coated Fr. 14, Needleless 2000 Pc 80,000.00 100 Foley Bag Cath. 2 Way-silicone Coated Fr. 18, Needleless 100 Pc 4,000.00 101 Foley Bag Cath. 2 Way-silicone Coated Fr. 20, Needleless 40 Pc 1,600.00 102 Foley Bag Cath. 2 Way-silicone Coated Fr. 22, Needleless 40 Pc 2,000.00 103 Foley Bag Cath. 3 Way-silicone Coated Fr. 22, Needleless 40 Pc 7,200.00 104 Foley Bag Cath. 3 Way-elastromerecoated Fr. 24, Disposable,needless, 10's 20 Pc 1,680.00 105 Gauze Cherry Balls, X-ray Detectable, Sterile,5's 3000 Pack 270,000.00 106 Gauze Surgical ,pre-cut,4x4x8 Ply, Sterile, With X-ray Detectable Thread, 5's (operating Sponge) 500 Pack 45,000.00 107 Gauze, Peanut Size, Sterile, X-ray Detectable, 10's 1200 Pack 84,000.00 108 Gauze 4x4x100-fine Mesh With Xray Line 100 Roll 150,000.00 109 Guide Wire, Adult 2 Pc 6,000.00 110 Guide Wire, Neonate 2 Pc 2,640.00 111 Head Positioner , Donut Type,gel Material, Adult 3 Pc 12,000.00 112 Head Positioner , Donut Type,gel Material, Neonate 3 Pc 9,000.00 113 Head Positioner , Donut Type,gel Material, Pedia 3 Pc 15,000.00 114 Heplock 10000 Pc 700,000.00 115 Hydroactive Gel Dressing,10's 40 Box 73,480.00 116 Hydrofiber Dressing,10's 30 Box 661,500.00 117 Hydrogel Amourphous Dressing,10's 40 Box 456,000.00 118 Hydrophilic Dressing 40 Pc 220,000.00 119 Hydrocolloid Dressing,5'/box 15 Box 157,500.00 120 Hypoallergenic, Elbow Length Latex Gloves S-7.0, 25 Pairs/box, For Delivery Room Use 20 Box 50,400.00 121 Hypoallergenic Soft Cloth Surgical Tape,3rolls/box 25 Box 50,000.00 122 Hypoallergenic Plaster (2.5cm) 20 Box 11,000.00 123 Impregnated Wound Dressings,10 X 10cm,10's 20 Box 79,000.00 124 Iv Cannula G-16 175 Pc 6,125.00 125 Intravenous Cannula G-18 (sharp, Not Easily Breakable, Slant Tip Needle) (provide Sample Atleast 2 Pcs) 21100 Pc 738,500.00 126 Iv Cannula G-20 (sharp, Not Easily Breakable, Slant Tip Needle) (provide Sample Atleast 2 Pcs) 16590 Pc 580,650.00 127 Iv Cannula G-22 (sharp, Not Easily Breakable, Slant Tip Needle) (provide Sample Atleast 2 Pcs) 8510 Pc 297,850.00 128 Iv Cannula G-24 (sharp, Not Easily Breakable, Slant Tip Needle) (provide Sample Atleast 2 Pcs) 11960 Pc 418,600.00 129 Iv Cannula G-26 (sharp, Not Easily Breakable, Slant Tip Needle) (provide Sample Atleast 2 Pcs) 29670 Pc 1,038,450.00 130 Iv Splint Neonate/newborn-white 300 Pc 20,400.00 131 Iv Splint Medium -green 500 Pc 35,000.00 132 Iv Splint Adult-small-yellow 500 Pc 35,000.00 133 Iv Splint Adult/large-blue 500 Pc 41,000.00 134 Infusion Set 60 Drops (microset), Tight Roller Clamp, With Lower Lock, Long, Sharp Spike, 1.5 Meters Tubing, Y-port (provide Sample Atleast 3 Pcs) 13790 Pc 620,550.00 135 Infusion Set 20 Drops (macroset), Tight Roller Clamp, With Lower Lock, Long, Sharp Spike, 1.5 Meters Tubing, Y-port (provide Sample Atleast 3 Pcs) 22946 Pc 1,032,570.00 136 Keratone 2.75 Blade 200 Pc 100,000.00 137 Kn95 Medical Grade,10's 300 Box 162,000.00 138 Light Cure Filling Material,set 1 Set 40,000.00 139 Light Cure Calcium Hydroxide 5 Tbs 15,000.00 140 Lubricating Solution, For Surgical Instrument (week Lube) 400ml/bot 10 Bottle 72,000.00 141 Laryngeal Mask Airway Supreme 3.0 With Built In Drain Tube 5 Pc 15,000.00 142 Laryngeal Mask Airway Supreme 4.0 With Built In Drain Tube 5 Pc 15,000.00 143 Laryngeal Mask Airway Supreme 5.0 With Built In Drain Tube 3 Pc 9,600.00 144 Mist Sterilizer Solution 5 Gal 7,500.00 145 Nasal Oxygen Cannula, Infant 670 Pc 13,400.00 146 Nebulizer Kit With Face Mask, Adult 800 Pc 96,000.00 147 Nebulizer Kit With Mask, Pedia 1000 Pc 60,000.00 148 Nasogastric Tube Fr. 10 With Radiopaque Line; No Cover, Fits 100cc Asepto Syringe; Silicon 200 Pc 7,000.00 149 Nasogastric Tube Fr.12 With Radiopaque Line; No Cover,fits 100cc Asepto Syringe; Silicon, Length 100cm 200 Pc 7,000.00 150 Nasopharyngeal Airway, Latex Free, Size 16 20 Pc 6,240.00 151 Nasopharyngeal Airway, Latex Free, Size 18 20 Pc 6,240.00 152 Nasopharyngeal Airway, Latex Free, Size 20 20 Pc 6,240.00 153 Nasopharyngeal Airway, Latex Free, Size 22 20 Pc 6,240.00 154 Nasopharyngeal Airway, Latex Free, Size 24 10 Pc 3,120.00 155 Nephrostomy Tube Fr. 10 5 Set 156,000.00 156 Nephrostomy Tube Fr. 12 5 Set 156,000.00 157 Nerve Block Needle 22g X 50mm,high Quality Stainless Steel Needle For Increased Stability,smoothly Polished And Burr Free Surface And Inner Lumen,echogenic Needle Tip And Shaft For Optimized Ultrasound Visibility,25's 20 Pc 36,000.00 158 Non-adhesive Foam Dressing, 10cm X 10cm,10's 10 Box 54,000.00 159 Non-rebreather Oxygen Mask, Pedia,with Non-kink Oxygen Tubing, Oxygen Reservoir Bag 100 Pc 6,000.00 160 Non-rebreather Oxygen Mask Neonate,with Non-kink Oxygen Tubing, Oxygen Reservoir Bag 100 Pc 6,000.00 161 Nylon 10-0 100 Pc 67,000.00 162 Ostomy Adhesive Remover Wipes,50's 10 Box 14,000.00 163 Oxygen Mask With Tubing Neonate 200 Pc 8,000.00 164 Orogastric Tube Fr. 5 600 Pc 12,000.00 165 Orogastric Tube Fr. 8 500 Pc 10,000.00 166 Picc Line Set 15 Set 45,000.00 167 Penrose Drainage Tubing 1"x18",sterile 100 Pc 2,600.00 168 Penrose Drainage Tubing 1/2"x12",sterile 100 Pc 2,400.00 169 Penrose Drainage Tubing 3/4"x18",sterile 100 Pc 2,400.00 170 Post-operative Waterproof/bacteria Proof Dressing, 20cm X 10cm,10's 2 Box 6,000.00 171 Post-operative Waterproof/bacteria Proof Dressing, 25cm X 10cm,10's 2 Box 6,000.00 172 Post-operative Waterproof/bacteria Proof Dressing, 30cm X 10cm,10's 2 Box 6,000.00 173 Plaster Of Paris, Fast Setting With Gypsum Powder And Leno Gauze 4 Inches X 5 Yards 800 Roll 136,000.00 174 Pressure Infusion Bag With Pressure Gauge, 500ml,back Net 10 Pc 14,000.00 175 Rectal Thermometer,non-mercuinal Rubber Tip 50 Pc 120,000.00 176 Round Needle, #16, 12's 3 Pack 405.00 177 Silver Wound Dressings, 5's 10 Box 12,000.00 178 Skin Marker 50 Pc 17,500.00 179 Skin Barrier Strips 10 Pc 18,000.00 180 Soaking Solution,gallon 4 Gal 8,000.00 181 Sputum Cup Screw Lock, Wide Mouth,30ml Transparent With Space For Labelling Of Patient's Information /data 500 Pc 7,500.00 182 Sputum Cup Screw Lock, Wide Mouth,50ml Transparent With Space For Labelling Of Patient's Information /data 2000 Pc 50,000.00 183 Sterload Cartridge 100 Pc 450,000.00 184 Steripack Medium Pouch 5 Box 8,000.00 185 Steripack Large Pouch 5 Box 9,000.00 186 Steri-strips,1/4in X 4 In, 6mm X 100mm, Sterile, 50's 4 Box 15,600.00 187 Stoma Powder,2's/pack 10 Pack 35,000.00 188 Stomahesive Paste ,3's 10 Pack 30,000.00 189 Stoma Washing Bottle,250ml 10 Pc 5,000.00 190 Suction Cath. Fr. 10 With Thumb Control Valve, 50-60cm Length 800 Pc 12,800.00 191 Suction Cath. Fr. 12 With Thumb Control Valve, 50-60cm Length 800 Pc 12,800.00 192 Surgical Blade # 12, Sterile,100's 5 Box 1,800.00 193 Surgical Blade # 15, Sterile,100's 10 Box 3,600.00 194 Surgical Blade # 24, Sterile,100's 7 Box 3,024.00 195 Surgical Gown, Sterile, Non-woven Fabrics, Blue, Elastic/knitted Cuff, Gown Is Breathable And Will Not Fell Stuffy When Worn For Long Period Of Time, With Tie/magi Stick On Back (individually Pack) 500 Pack 95,000.00 196 Sterile Non-adherent Pad Dressings, 100's 20 Box 24,000.00 197 Sterilizer Agent 140ml/bot. Compatible With The Existing Gas Sterilizer 10 Bottle 250,250.00 198 Sterilization Reel 150cm X 200cm (3") Steam Sterilization 8 Roll 55,680.00 199 Sterilization Reel 15 Cm X 100 Cm (6"), Steam Sterilization 15 Roll 42,900.00 200 Sterilization Packing Pouch 135mm X 280mm 5 Box 7,500.00 201 Sterilization Pouch For Gas Sterilizer, 75mm(w) X 80m 3 Box 33,300.00 202 Sterilization Pouch For Gas Sterilizer, 100mm (w) X 80m 3 Box 45,540.00 203 Sterilization Pouch For Gas Sterilizer 150mm (w) X 80m 3 Box 61,260.00 204 Sterilization Pouch For Gas Sterilizer, 300mm(w) X 80m 3 Box 93,000.00 205 Surgical Clipper Starter Kit, Head Type Pivoting, With Charger Stand (please Provide Picture) 1 Kit 5,000.00 206 Toomey Syringe 70cc, 100%, Latex Free Double Flanged Plunger, Sterile 50 Pc 18,000.00 207 Thoracostomy (ctt) Tube Fr. 16/thoracic Drainage Catheter 10 Pc 2,500.00 208 Thoracostomy (ctt) Tube Fr. 22/thoracic Drainage Catheter 10 Pc 1,120.00 209 Thoracostomy (ctt) Tube Fr. 28/thoracic Drainage Catheter 30 Pc 3,360.00 210 Thoracostomy (ctt) Tube Fr. 30/thoracic Drainage Catheter 30 Pc 3,360.00 211 Thoracostomy (ctt) Tube Fr. 34/thoracic Drainage Catheter 50 Pc 5,600.00 212 Tracheostomy Set Tube Cuffed With Inner Cannula, Size 6.0 5 Pc 17,550.00 213 Transparent Dressing 4"x3" 200 Pc 21,000.00 214 Transparent Dressing Adult (for Iv Site Dressing)100's 7 Box 26,880.00 215 Transparent Dressing Pedia, 6x7cm(for Iv Site Dressing)100's 7 Box 26,880.00 216 Transparent Adhesive Film (for Dressing 15.5x8.5cm), 6rolls/box 30 Box 75,000.00 217 Transparent Opsite Film Dressing Waterproof/bacteria Proof Absorbent Ressing Pad Size- 6cm X 7cm, Material- Plastic, 10's 2 Box 4,000.00 218 Transparent Opsite Film Dressing Waterproof/bacteria Proof Absorbent Ressing Pad Size- 10cm X 12cm, Material- Plastic, 10's 2 Box 4,000.00 219 Transparent Opsite Film Dressing Waterproof/bacteria Proof Absorbent Ressing Pad Size- 6.5cm X 5cm, Material- Plastic, 10's 2 Box 4,000.00 220 Transparent Opsite Film Dressing Waterproof/bacteria Proof Absorbent Ressing Pad Size- 9.5cm X 8.5cm, 10's 2 Box 5,000.00 221 Transparent Opsite Film Dressing Waterproof/bacteria Proof Absorbent Ressing Pad Size- 15.5cm X 8.5cm, 10's 3 Box 9,000.00 222 Trypan Blue 100 Pc 32,000.00 223 Umbilical Catherization Set 20 Set 50,000.00 224 Ultrasound Gel;water Soluble,non-greasy And Used For Therapeutic Applications Requiring A Viscous And Non-spermicidal Gel, Gal. 12 Gal 45,000.00 225 Viscoelastic Gel 200 Pc 64,000.00 226 Volumetric Set (with Large Calibrated Burette Chamber, Approx. 60 Drops/ml,with Needle Free Y Sites (provide Sample Atleast 3 Pcs) 16250 Pc 2,925,000.00 227 Wadding Sheet 4x5y 500 Roll 15,000.00 228 Waterlock For Capnography Compatible With Draegger Brand 10 Pc 56,250.00 229 Wipes Disinfectant, With Quarternary Ammonium Compound,100 Pulls 20 Box 22,000.00 230 Wrapping Cloth Non Woven 75cm X 75cm,500's 10 Box 105,000.00 231 Wound Dressing, 9cmx15cm 100 Pc 11,000.00 232 Wound Dressing, 6cmx7cm 100 Pc 10,000.00 233 Wound Contact Pad 4cmx2.5cm + Border 1.25cm 300 Pc 30,000.00 234 Wound Irrigating Solution,350ml 50 Bottle 90,000.00

Details: Description Republic Of The Philippines City Of Canlaon Office Of The Bids And Awards Committee Invitation To Bid For The Early Procurement Activity (epa) For The Procurement Of Construction Materials For The Improvement Of Multi-purpose Building The Local Government Of Canlaon City, Through The Aip 2025 Intends To Apply The Sum Six Hundred Fifty-seven Thousand, Four & 50/100 (p657,004.50) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Various Construction Materials For Use In The Improvement Of Multi-purpose Building, Brgy. Ninoy Aquino, Canlaon City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Award Of The Contract Is Subject To The Effectivity Of The General Appropriations Act (gaa) For Fy 2025. The Local Government Of Canlaon City Is Conducting This Procurement Through The Early Procurement Activity (epa) For Fy 2025 To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services, Consistent With The Gppb Resolution No. 14-2019 Dated July 17, 2019. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e Fy 2025), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Local Government Of Canlaon City, Will Evaluate The Bid Proposal And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be The Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget. C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Validity, If The Bidder Refuses To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. The Local Government Of Canlaon City, Now Invites Bids For The Supply And Delivery Of Various Construction Materials For Use In The Improvement Of Multi-purpose Building, Brgy. Ninoy Aquino, Canlaon City. Delivery Of The Goods Is Required 7 Calendar Days After Issuance And Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Ten Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184 Interested Bidders May Obtain Information For The City Government Of Canlaon City Thru The Office Of The Bids And Awards Committee And Inspect Bidding Documents During Office Hours (8:00am To 5:00pm), Monday To Friday. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On November 4, 2024 To November 25, 2024 Until 10:00 Am At The Office Of The Bids And Awards Committee, Canlaon City, And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand (p1,000.00) Pesos. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Facsimile. The Local Government Of Canlaon City Will Hold A Pre-bid Conference On November 12, 2024 – 2:00 Pm At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City, Which Shall Be Open To Prospective Bidders Bids Must Be Received By The Bac Secretariat Through Manual Submission On Or Before November 25, 2024, 10:00 Am At The Office Of The Bids And Awards Committee, 2nd Floor, City Hall Building, Canlaon City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On November 25, 2024, 10:00 Am At The At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. For The Purpose Of Constituting A Quorum, Either The Physical And Virtual Presence Of The Bac Member Shall Be Considered Pursuant To Gppb Resolution No. 09-2020. The Local Government Unit Of Canlaon Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Alice D. Mcguiggan Bac Secretariat Mobile No. 0917-561-7931 Email Address: Bacofficelgucanlaon@yahoo.com Date Of Posting: November 3, 2024 Doris Y. Flores Bac Chairperson Republic Of The Philippines City Of Canlaon Bids And Awards Committee Control No.: #1 Bid Form Name Of Project: Improvement Of Multi-purpose Building Brief Description: Supply And Delivery Of Various Construction Materials Location: Brgy. Ninoy Aquino, Canlaon City Bill Of Quantities Stock No. Quantity Unit Item Description Unit Cost Unit Cost Total Cost 1. 1 Roll ½" X 30m Teflon Tape 40.00 2. 1 Kg. 1 1/2" Common Wire Nail 101.00 3. 1 Box 1 1/2" Gypsum Black Screw For Wood, 500pcs./box 300.00 4. 75 Lgth. 1 1/2" X 1 1/2" X 3/16" Angle Bar 907.00 5. 10 Lgth. 1" X 1" X 3/16" Angle Bar 472.00 6. 8 Lgth. 1.16m Nominal Width X 20' Long Mini-rib, Oakwood Design 2,000.00 7. 9 Lgth. 1.16m Nominal Width X 20' Long Mini-rib, White 2,000.00 8. 2 Pc. 1/2"ø Gate Valve 383.00 9. 2 Lgth. 1/2"ø Pvc Blue Pipe 120.00 10. 2 Pcs. 1/2"ø Pvc Blue Tee 20.00 11. 4 Pcs. 1/2"øx90° Bend Pvc Blue Elbow 15.00 12. 1 Pc. 1/2"øx90° Bend Pvc Blue Elbow With 1 Side Threaded 20.00 13. 3 Shts. 1/2"x4'x8' Ordinary Plywood 1,001.00 14. 8 Shts. 1/4" X 4' X 8' Fiber Cement Board (hardiflex) 908.00 15. 31 Lgth. 10mmø X 6.0m Dsb, G-33 239.00 16. 4 Lgth. 10mmø X 6.0m Plain Round Bar, G-33 256.00 17. 17 Pcs. 14" Cut-off Wheel 317.00 18. 9 Pcs. 16" X 8' X 0.4mm Pre-painted Fascia Cover 467.00 19. 12 Pcs. 16mm Ø X 16" At 45 Degree Bend Anhor Bolt With Nuts And Washers 400.00 20. 51 Lgth. 16mmø X 6.0m Dsb, G-33 591.00 21. 60 Lgth. 17mm X 49mm X 0.6mm X 5m Double Furring 217.00 22. 325 Pcs. 2 1/2" Tekscrew 5.00 23. 4 Pcs. 2" Paint Brush 60.00 24. 3 Lgth. 2" X 2" X 1.6mm G.i. Square Tube 743.00 25. 30 Lgth. 2" X 2" X 1/4" Angle Bar 1,604.00 26. 2 Lgth. 2" X 3" X 1.6mm G.i. Rectangular Tube 931.00 27. 6 Pcs. 2" X 4' X 8' Steel Matting 780.00 28. 3 Lgth. 2" X 4" X 1.6mm G.i. C- Purlins 875.00 29. 1 Lgth. 2"ø Pvc Sanitary Pipe S-1000 420.00 30. 7 Pcs. 2"ø X 90° Bend Pvc Elbow 90.00 31. 2 Pcs. 2"ø X Sanitary Tee 150.00 32. 10 Lgth. 2"x 4" X 6mm Channel Bar 4,000.00 33. 29 Lgth. 2"x3"x 1.6mm, G.i. C-purlins 779.00 34. 20 Lgth. 2"x3"x 1.6mm, G.i. Rectangular Tube 931.00 35. 7 Pcs. 24" X 8' X 0.4mm Pre-painted Fascia Cover 700.00 36. 3 Pcs. 250mm X 250mm X 20mm Base Plate With 4-18mm Ø Drill Holes 2,625.00 37. 10 Kgs. 3" Common Wire Nail 95.00 38. 8 Shts. 3/16" X 4' X 8' Chekered Plate 9,000.00 39. 4 Shts. 3/4"x 4' X 8' Marine Plywood 1,914.00 40. 100 Bd.ft. 30 Pcs. - 2"x2"x10' Good Lumber 55.00 41. 10 Kgs. 4" Common Wire Nail 90.00 42. 10 Pcs. 4" Grinding Stone 90.00 43. 1 Pc. 4" Ø Flap Disc, 120 Grit 68.00 44. 2 Pcs. 4" Ø Flap Disc, 80 Grit 68.00 45. 2 Lgth. 4" Ø X 6m G.i. Pipe, Sched. 40 5,131.00 46. 6 Pcs. 4" Paint Brush 90.00 47. 1 Pc. 4" Stainless Steel Floor Drain 500.00 48. 50 Pcs. 4"ø Cutting Disc For Steel 129.00 49. 2 Shts. 48" X 8' X 0.4mm Pre-painted Gutter 1,400.00 50. 15 Pcs. 5/32 Ø Drill Bit For Steel 129.00 51. 3 Boxes 5/32 Ø X 3/4" Blind Rivets, 1000 Pcs 552.00 52. 1 Pc.. 5/32" ɸ Wood Drill Bit 150.00 53. 1 Pc. 550mm X 450mm Stainlees Steel Kitchen Sink With Complete Accessories 5,500.00 54. 3 Pcs. 6" Stainless Door Handle, Round 150.00 55. 56.7 Lm. 7 Shts - 9.0m X 900mm X 25mm X .40mm Thk. Pre-painted Longspan Roofing 600.00 56. 6 Pcs. 7" Paint Roller With Tray 120.00 57. 12 Pcs. 75mm X 75mm X 20mm Base Plate 660.00 58. 28 Lgth. 9mmø X 6.0m Dsb, G-33 153.00 59. 1 L. All Pupose Epoxy A&b 1,300.00 60. 7 Tubes Builders Bond Construction Adhessive, 300ml Cartridge 350.00 61. 100 Pcs. Cable Ties, 8 X 300 Mm 12.00 62. 1 Pc. Circuit Breaker, 30at, 2-pole, 240v With Plastic Cover 1,028.50 63. 150 Pcs. Conductor Wire, 3.5mm² Thw, Cu. 52.00 64. 100 M. Conductor Wire, 5.5mm² Thw, Cu. 101.00 65. 30 Pcs. Conduit Elbow 20mm Upvc, 90 Deg Long Radius, Thick Walled, Orange Color 38.00 66. 15 Lgth Conduit Pipe 20mm X 254mm Upvc, Thick Walled, Orange Color 201.50 67. 2 Sets Convenience Outlet, Duplex, Universal, Flush Type, Or Equivalent 197.00 68. 10 Cu.m. Crushed Stone, G-¾ 2,378.00 69. 1 Cu.m. Crushed Stone, G-1 2,166.00 70. 1 Set Duplex Switch, Flush Type, Or Equivalent 148.00 71. 24 Kgs. E6013 Welding Electrode 175.00 72. 3 Tubes Elasto Seal Pioneer, 300ml 450.00 73. 3 Rolls Electrical Tape, (0.16mm X 19mm X 16yrds), Plastic 75.00 74. 5 Cu.m. Fined Sand 1,325.00 75. 50 M. Flexible Conduit Pipe, 20mmɸ Upvc, Coilable, Orange Color 25.75 76. 3 Sets Full Overlay Concealed Hinges 150.00 77. 25 Kgs. G.i. Tie Wire G.a. 16 103.00 78. 1 Set Gfci Outlet, Duplex 2,000.00 79. 1 Bag Heavy Duty Tile Adhesive, 25kg./bag 550.00 80. 5 Pcs. Italgres Premium 60x60 Marble Gray 198.00 81. 7 Pcs. Junction Box, 4" X 4" Upvc, Orange Color W/ Cover And Screws 54.00 82. 5 Gals. Lacquer Thinner 782.00 83. 5 Pcs. Led Bulb (12w, Daylight) 250.00 84. 10 Pcs. Led Bulb (12w, Tri-color) 380.00 85. 1 Pc. Lenox Blade 125.00 86. 1 Gal. Liquid Tile Gloss, White 1,600.00 87. 1 Gal. Liquid Tile Primer, White 1,400.00 88. 1 Gal. Liquid Tile Reducer 780.00 89. 2 Lgth. Master Tile Trim, 10mm X 2.5m Aluminum, Silver 185.00 90. 1 Pc. Modern Led Ceiling Light, Dimmable, Tri-color, Iron And Acrylic Material, 4 Square Heads 62*40*14cm, 56w, With Wireless Remote Control 1,800.00 91. 13 Gals. Pioneer Epoxy Primer With Catalyst, Gray 1,500.00 92. 50 Pcs. Polyflex Hose Connector, 20mm, Orange Color 12.00 93. 78 Bags Portland Cement, 40kg/bag, Type I 287.00 94. 3 Pcs. Putty Plate 30.00 95. 1 Can Pvc Solvent, 200ml 110.00 96. 4 Pcs. Recessed Lamp, 4'' ɸ X 6'' Depth With Socket, Standard Base (e-27), Safety Clip Without Bulb 350.00 97. 3 Gals. Rust Converter 948.00 98. 1 Tube Silicon Sealant, Grey 300.00 99. 1 Pc.. Slabs Bremen, 60x180cm Absolute Black 8,300.00 100. 3 Sets Three Way Switch, Flush Type,or Equivalent 420.00 101. 1 Set Universal Outlet With Ground, Single 480.00 102. 9 Pcs. Utility Box, 2"x 4" Upvc, Orange Color 32.00 103. 33 Pcs. Wall Angle 81.00 Total Brand Model:_____________ Delivery Period:______________________ Warranty: After Having Carefully Read & Accepted Your General Conditions. I/we Quote On The Item/s Price/s Noted Above. Total Bid Price (in Words) Bid Security: Amount: Submitted By: Bidder/supplier Date:_________________________

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Ooooooooo @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Bids And Awards Committee Invitation To Bid Ib No. 2024-12-04 (93) Supply And Delivery Of Various Medical Supplies For Csss Abc: ₱ 1,288,769.70 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy2024 Internally Generated Fund (igf) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of One Million Two Hundred Eighty Eight Thousand Seven Hundred Sixty Nine Pesos & 70/100 Only ( Php 1,288,769.70 ) As To Payment Under The Contract For The Supply And Delivery Of Various Medical Supplies For Csss. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding. This Is A Partial Bid Or Line Item Bid. Item No. Description Qty Unit Of Measure Unit Cost Total Cost 1 Absorbable Haemostatic Gelatin Sponge 7cm X 5cm X 1cm 100 Pcs 472.88 47,288.00 2 Absorbable Hemostat (oxidized Regenerated Cellulose 3 Inches X 4 Inches) 10 Pcs 2,278.57 22,785.70 3 Electrosurgical Grounding Pad Adult Made Of Polyhesive 2.3 To 2.8 Metre Cable, Disposable 100 Pcs 845.00 84,500.00 4 Electrosurgical Grounding Pad Pedia Made Of Polyhesive 2.3 To 2.8metre Cable, Disposable 50 Pcs 825.00 41,250.00 5 Lapsponge Surgical 12 X 12 X 12 Ply, 28 X 24 Mesh Latex Free, Pre Washed And De-linted For Problem Free Use, Xray Detectable Absorbent 100% Cotton; 1 Pc/pack 2000 Pcs 42.00 84,000.00 6 Penrose Drain 1 Inch; Sterile Penrose Drain Individually Pack Per 1; With Lot Number, Manufacturing Date And Expiry Date Label 10 Pcs 80.00 800.00 7 Penrose Drain 1/2 Inch; Sterile Penrose Drain Individually Pack Per 1; With Lot Number, Manufacturing Date And Expiry Date Label 10 Pcs 80.00 800.00 8 Penrose Drain 1/4 Inch; Sterile Penrose Drain Individually Pack Per 1; With Lot Number, Manufacturing Date And Expiry Date Label 140 Pcs 80.00 11,200.00 9 Penrose Drain 3/4 Inch; Sterile Penrose Drain Individually Pack Per 1; With Lot Number, Manufacturing Date And Expiry Date Label 10 Pcs 80.00 800.00 10 Surgical Blade No. 10 Box Of 100 Pcs; Sterilized By Gamma Radiation 2.5m Rads; Surgical Blade Stainless Steel; Excellent Cutting Quality, Strength And Corrosion Resistant, Disposable Blades; Individually Wrapped And Sealed In Aluminum L 10 Box 850.00 8,500.00 11 Surgical Blade No. 11 Box Of 100 Pcs; Sterilized By Gamma Radiation 2.5m Rads; Surgical Blade Stainless Steel; Excellent Cutting Quality, Strength And Corrosion Resistant, Disposable Blades; Individually Wrapped And Sealed In Aluminum Ff 10 Box 850.00 8,500.00 12 Surgical Blade No. 12 Box Of 100 Pcs; Sterilized By Gamma Radiation 2.5m Rads; Surgical Blade Stainless Steel; Excellent Cutting Quality, Strength And Corrosion Resistant, Disposable Blades; Individually Wrapped And Sealed In Aluminum Ff 6 Box 850.00 5,100.00 13 Surgical Blade No. 15 Box Of 100 Pcs; Sterilized By Gamma Radiation 2.5m Rads; Surgical Blade Stainless Steel; Excellent Cutting Quality, Strength And Corrosion Resistant, Disposable Blades; Individually Wrapped And Sealed In Aluminum Ff 10 Box 850.00 8,500.00 14 Surgical Blade No. 20 Box Of 100 Pcs; Sterilized By Gamma Radiation 2.5m Rads; Surgical Blade Stainless Steel; Excellent Cutting Quality, Strength And Corrosion Resistant, Disposable Blades; Individually Wrapped And Sealed In Aluminum Ff 5 Box 850.00 4,250.00 15 Surgical Scrub Brush With 4% Chlorhexidine Solution Per Piece 2000 Pcs 24.50 49,000.00 16 Suture Chromic 3.0 Round Needle, Length 75cm, Absorbable Radiation, Needle Length 30mm, Ss420, Rb, Long-term Wound Support; Excellent Product Quality Assurance Evaluation By End User; Must Be Sharp Quality 10 Pcs 317.00 3,170.00 17 Suture Polyglactin 2.0 Cutting, Coated; 36mm 1/2c Tapercut Polyglactin 910 Rapide; Undyed Braided Absorbable Suture; W/ Excellent Product; Quality Assurance Evaluation; Must Be Sharp 498 Pcs 950.00 473,100.00 18 Suture Chromic 2.0 Cutting Needle; Suture, Surgical Cut – Chromic, Reverse Cutting, Cp-2 26mm 1/2c, 27 Inch (70 Cm), Size 2-0.; Blue/undyed, Natural And Collagen, Suture Monofilament, Absorbable; W/ Excellent Product; Quality; Must Be Sharp 10 Pcs 317.00 3,170.00 19 Polypropylene, Monofilament Non-absorbable Needle Type Round 1/2 Circle Taper Point Needle Size 31mm Suture Size 2-0 Suture Length 75mm; Excellent Product Quality And Must Be Sharp 66 Pcs 498.00 32,868.00 20 Polypropylene, Monofilament Non-absorbable Needle Type Round 1/2 Circle Taper Point Needle Size 13mm Suture Size 5-0 Suture Length 75mm Double-ended; Must Be Sharp And Excellent Product Quality 49 Pcs 650.00 31,850.00 21 Polypropylene, Monofilament Non-absorbable Needle Type Round 1/2 Circle Taper Point Needle Size 22mm Suture Size 3-0 Suture Length 75mm; Excellent Product Quality; Must Be Sharp 68 Pcs 498.00 33,864.00 22 Suture Polypropylene 4.0 Round; Ps-2 19mm (45cm 45 Cm); Blue; Suture Monofilament; Non-absorbable; Long-term Wound Support; Excellent Product Quality And Must Be Sharp 66 Pcs 498.00 32,868.00 23 Suture Polypropylene 1 Round, Length 100 Cm, Mas Closure (muscle/sheath), Monofilament, Non-absorbable, Gas Eo (s), Needle Length 45mm, Ss420, Rc, Long-term Wound Support; Excellent Product Quality And Must Be Sharp 36 Pcs 498.00 17,928.00 24 Suture Polypropylene 2-0 Cutting Suture 45cm Lenght; 26mm Needle Lenght; 3/8 Circle Reverse Cut, Long-term Wound Support; Excellent Product Quality And Must Be Sharp 200 Pcs 498.00 99,600.00 25 Suture Polypropylene 3 With Cutting Needle, 26 Mm 3/8c, Reverse Cutting, 18” (45cm), Monofilament, Non-absorbable, Blue, Long-term Wound Support; Excellent Product Quality And Must Be Sharp 225 Pcs 498.00 112,050.00 26 Suture Polypropylene 4-0 With Cutting Needle, Length 70cm, Monofilament, Non-absorbable, Gas Eo (s) 17mm, Ss4310, Tc, Long-term Wound Support; Excellent Product Quality And Must Be Sharp 60 Pcs 498.00 29,880.00 27 Suture Polypropylene 0 Round Length 90 Cm, Mitral Valve Annulas, Monofilament, Non-absorbable, Gas Eo(s), Needle Length 30mm, Ss420, Tc, Long-term Wound Support; Excellent Product Quality Assurance Evaluation By End User And Must Be Sharp 36 Pcs 498.00 17928.00 28 Suture Polypropylene 5-0 With Cutting Needle, Length 70 Cm, Monofilament, Non-absorbable, Gas Eo(s), Needle Length 12mm, Long-term Wound Support; Excellent Product Quality Assurance Evaluation And Must Be Sharp 43 Pcs 540.00 23,220.00 Grand Total ₱1,288,769.70 Terms Of Reference Delivery: One Time Delivery 15 Calendar Days Upon Receipt Of The Notice To Proceed Expiration Minimum Of Two (2) Years Expiry Upon Delivery. Terms Of Payment Payment Shall Be Made Upon Complete Delivery. Necessary Documents Are Required In Compliance With Auditing Rules And Regulations. Bid Evaluation/ Post-qualification During The Evaluation And Post – Qualification Stage, The Twg And Bac Shall Consider The Previous Findings From The Product Quality Assurance Evaluation Report. This Includes Incorporating Assessments Of Product Quality, Performance And Suitability. During The Actual Product Demo, The Bidder’s Representative Shall Be Present. The Product Presented Should Demonstrate “excellent” Performance, As Defined By The Twg And The End-user Based On The Pqae. This “excellent” Mark Signifies That The Product Meets The Needs And Expectations Of Both Medical Experts And The End-user, As Determined Through The Actual Product Samples And Previous Performance Evaluation. In Addition To The Evaluation Process, A Product Demo Or Sample Is Strongly Recommended Particularly For Products That Are New, Unfamiliar To The Twg And End-user. The Bidder Shall Comply The Post-qualification Requirements Set By The Procuring Entity Especially During Product Demonstration Or Requiring For A Product Sample On A Given Schedule. Failure To Comply Shall Be Ground For Post-disqualification. The Procuring Entity Shall Require The Bidder To Deliver A Product Sample Or Demo To Caraga Regional Hospital Vicinity. Additionally, The Procuring Entity May Have Preferences Regarding How This Hospital Can Find Reliable And Easily Accessible Procedures During The Post-qualification Phase. Consequently, During This Phase, The Bidder Must Always Be Ready To Comply With Any Requirements Or Standards Made By The Procuring Entity. This Procurement Is A Partial Bid Or Line Item Bid. Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent ( 25% ) Of The Abc. Slcc Must Be Within 5 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature, Which Shall Be Determined By The Bac. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13, 2024 To December 04, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference November 21, 2024 At 9:00 O’clock In The Morning Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/81355902163?pwd=vs7bdhgjdq6ajji38oh4p7zaydmdbl.1 Meeting Id: 813 5590 2163 Passcode: 433548 Deadline Of Submission Of Bids December 04, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com. Opening Of Bids December 04, 2024 At 2:00 P.m. Via Zoom Platform. Link: Join Zoom Meeting Https://us06web.zoom.us/j/85742140492?pwd=4ixucjmfvpbh7stlb0tijjlbfe7hdw.1 Meeting Id: 857 4214 0492 Passcode: 254281 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1sbne9s9iruplxqm5fndogq_pf07vl-dc?usp=sharing Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps And All Form And Part Of This Invitation To Bid, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents E. Other Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before December 04, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 04, 2024 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Please Show Your Intent By Filling Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Details: Description Procurement Of Learning Tools And Equipment (lte) For Technical-vocational-livelihood (tvl) Packages For Public Senior High Schools Fy 2024 Of Deped, Division Of Bacolod City Lot 1. Hardware Tools And Equipment Fire Extinguisher, With Contents I-for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.lncludes User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality 2 Units Php 4,250.00 Allen Wrench 1. Material: Chrome Vanadium Steel, Hrc 38 To 60 2. Set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm 3. With Holder/ring To Keep The Set Intact 4. Label Of Sizes Engraved In Each Allen Wrech 5. Smooth Surfaces And No Sharp Edges 6. Plastic Pack By Set 35 Pcs Php 1,000.00 Crimping Tool (rj 45) Pass Through 1. Ratchet Crimp Tool 2. All-in-one Tool That Can Strip, Cut, And Crimp 3. Lightweight Steel Frame 4. Rj 45 Compatible 5. Position For 8p/6p/6c And 4c Connectors 6. Lightweight Compact And Durable 7. Smooth Surface And No Sharp Edges Except Cutting Edges 8. Carton Box Packaging 30 Pcs Php 1,500.00 Desoldering Pump 1. Material: Plastic Or Aluminum Housing 2. Replaceable Het-resistant Plastic Tip 3. Length: Minimum Of 6 Inches 4. Effective In Removing Solder 5. Smooth Surface And No Sharp Edges 6. Carton Or Plastic Packaging 30 Pcs Php 650.00 Electric Drill, Portable Material: Hard Plastic Related Voltage: 220/240volts, Ac 60 Hz Power In Watts: 550 To 650 Watts Speed: Variable Speed Chuck Capacity: 2 To 13 Mm Power Cord Must Have Flt Blade Attachment Plug (type A Plug) Comes With Hss Drill Bits: 2 Mm 4 Pcs, 4 Mm 4pcs, 6 Mm 4 Ppcs, 8 Mm 4pcs, 10 Mm 4 Pcs, 12 Mm 4pcs, 12.5 Mm 4 Pcs Total- (28 Pcs) Masonry Drill Bits: 4 Mm 2 Pcs, 6 Mm 2 Pcs, 8 Mm 2 Pcs, 10 Mm 2pcs, 12 Mm 2 Pcs Total - ( 10 Pcs) With Hammer Function For Concrete Drilling Comes With English User’s Manual Includes Of The Following A. A Diagram Of The Parts With Label; B. Assembly Instructions; C. Operating Procedures; D. Safety Precautions When Using The Equipment; E. Basic Troubleshooting And Maintenance Procedures. Warranty Period Of Parts And Services: 1 Year 3 Units Php 7,500.00 Long Nose Pliers, 8 1. Material: Chrome Vanadium Steel, Hrc 38 To 60 2. Length: 7 Inches (minimum) 3. Handle Type: Curved Handle With Rubber Cushion For Easy Grip 4. Jaws Type: Knurled And Long Tempered 5. Comes With Hardened Cutting Edges And Chrome-nickel Finish 6. Smooth Surface And No Sharp Edges 7. Carton Or Plastic Packaging 30 Pcs Php 523.00 Phillip's Screw Driver ,8" Insulated Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; Handle Material: Molded Plastic Overall Length: 8 Inches (minimum) Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) Non Slip Handle Design Carton Or Plastic Packaging 20 Pcs Php 350.65 Precision Screw Driver Set Material: Hardened And Tempered Steel; 1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1 6 X Standard Tip No. 1,1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet ; Plastic Storage Case; 15 Pcs Php 1,000.00 Soldering Iron, 60w Type: Iron Rod Voltage: 220/240vac, 60hz, Single Phase; Power 60w (minimum); Body Length: 8.3 Inches (21 Cm) Approximate Cord Length: 1.5 Meters (minimum) Handle : Plastic; (non-slip Handle) With User's Manual In English That Contains User's Guide, Operating Procedure And Maintenance. Interchangeable Copper Tip; Should Have Available Spare Parts Nationwide For A Minimum Period Of 5 Years; Carton Or Plastic Packaging 30 Units Php 1,500.00 Standard Screwdriver (flat), 8" Insulated Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; Handle Material: Molded Plastic Overall Length: 8 Inches (minimum) Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) Non Slip Handle Design Carton Or Plastic Packaging 30 Pcs Php 533.00 Wire Stripper Type: Spring-loaded Self-opening; Body Shape: Long Jaw With Slot Blade Material: Hardened Alloy Steel (sharp Edges To Strip And Cut The Wires) Wires To Striped: 10 Awg To 24 Awg Length: 7 Inches (minimum) Comes With Automatic Self-adjusting Spring, Crimping Slot, And Hard 15 Pcs Php 600.00 Combination Pliers, 8" Type: Combination Pliers Body Shape: Square Nose Material: Chrome Vanadium/forged Steel Length: 9 Inches (minimum) Insulation Range: 1000 Volts (etched On The Handle) Design: Square Nose With Serrated Jaw Comes With Nickel Plated Finish, Side Cutter And Insulated Handle Must Be Branded (brand Must Be Etched Either In The Head Or On The Handle) 20 Pcs Php 380.00 Sub-total Php 245,793.00 Lot 2. Appliances Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service 2 Units Php 3,900.00 Clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing Ioa Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 1 Unit Php 3,101.00 Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 2 Units Php 1,800.00 Vacuum Cleaner, Dry & Wet Electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing Ioa Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Userts Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, 1 Unit Php 10,002.00 Laundry, Washer 1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Plz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.1nciudes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 1 Unit Php 49,999.00 Sub-total Php 74,502.00 Lot 3. Cleaning Tools And Equipment Boots, Safety, Plastic Upper Material: Elastic Pvc Sizes: Size 7 - 1 Pair Size 8 - 1 Pair Size 9 - 1 Pair Size 10 -1 Pair Size 11 - 1 Pair Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size 5 Pairs Php 1,250.00 Brushes, For Housekeeping Brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- Lcm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges 5 Pcs Php 500.00 Buckets, Water Water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges 5 Pcs Php 350.00 Caddy, Toilet Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :piastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges 2 Pcs Php 600.00 Carpet, Sweeper Carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 1 Pc Php 5,000.00 Lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch 20 Pcs Php 80.00 Dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges 10 Pcs Php 275.00 Anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges 10 Pcs Php 250.00 Foam, Scrubbing 1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality 30 Pcs Php 50.00 Garbage Receptacles 1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality 2 Pcs Php 1,000.00 Gloves, Rubber 1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.coior : Any Color 4.size : Medium 5.0ther Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality 18 Pcs Php 263.80 Mop Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 3 Pcs Php 1,000.00 Caution Sign A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100-120 Mm X 50-70 Mm, Arial Smooth Surface, No Sharp Edges 5 Pcs Php 650.00 Dish Sponge Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded 5 Pcs Php 200.00 Spray Gun, Water Barber/saion Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded 5 Pcs Php 150.00 Squeegee Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges 2 Pcs Php 800.00 Mop Squeezer Mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges 2 Pcs Php 5,000.00 Sub-total Php 51,398.40 Grand Total Php 371,693.40 Instruction: Indicate “comply” Or “not Comply” In The Space Provided Below. Items Description Statement Of Compliance (state “comply” Or “not Comply”) Other Requirements: • Branded, Brand New/ New Stocks • Sealed With Label • With Appropriate Packaging • With User Manual (for Equipment) • With Necessary Accessories (power Cord / Adapter / Charger / Etc) • With Warranty, Replacement Of Damage Equipment Within 1month Warranty Period • Available Service Center Within Bacolod City (equipment, Appliance, Etc) To Be Delivered At: Deped Division Of Bacolod City (supply And Property Office)

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Medical Supplies Bid No. Sjh-24-1358-b Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 7 8. Pre-bid Conference ………………………………………………………………. 7 9. Clarification And Amendment Of Bidding Documents …………………………… 7 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 7 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 8 13. Bid And Payment Currencies ……………………………………………………… 8 14. Bid Security ………………………………………………………………………. 8 15. Sealing And Marking Of Bids ……………………………………………………… 9 16. Deadline For Submission Of Bids …………………………………………………. 9 17. Opening And Preliminary Examination Of Bids ………………………………….. 9 18. Domestic Preference ……………………………………………………………… 9 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 9 20. Post-qualification ………………………………………………………………… 10 21. Signing Of The Contract …………………………………………………………… 10 Section Iii. Bid Data Sheet …………………………………………………..11 Section Iv. General Conditions Of Contract……………………...………..12 1. Scope Of Contract ………………………………………………………………… 12 2. Advance Payment And Terms Of Payment ……………………………………….. 12 3. Performance Security ……………………………………………………………. 12 4. Inspection And Tests ……………………………………………………………… 12 5. Warranty …………………………………………………………………………. 13 6. Liability Of The Supplier ………………………………………………………….. 13 Section V. Special Conditions Of Contract ………………………………….14 Section Vi. Schedule Of Requirements ……………………………………....16 Section Vii. Technical Specifications …………………………………………20 Section Viii. Checklist Of Technical And Financial Documents …………..22 Section I. Invitation To Bid Purchase Of Medical Supplies Bid No. Sjh-24-1358-b 1. The Iloilo Provincial Government Through The Mooe 2024, Sb#1 Gen. Fund. Intends To Apply The Sum Of Three Million Four Hundred Seventy Five Thousand Pesos (₱3,475,000.00) Being The Abc To Payments Under The Contract For The Purchase Of Medical Supplies. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project.delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱ 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On November 13, 2024 At The 5th Floor Bids And Awards Committee Secretariat Office, Iloilo Provincial Capitol, Iloilo City And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Beopen To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol On Or Before November 27 , 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024 At 9:01 A.m.at The Bids And Awards Committee Secretariat Office, 5th Floor, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Governmentreserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com October 30, 2024 Atty. Dennis T. Ventilacion Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Governmentwishes To Receive Bids For The Purchase Of Medical Supplies With Bid No. Sjh-24-1358-b. The Procurement Project (referred To Herein As “project”) Is Composed Of Sixty Five (65) Item's, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of Three Million Four Hundred Seventy Thousand Pesos(₱ 3,475,000.00). 2.2. The Source Of Funding Is: A. Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause5.3 Should Have Been Completed Within Three (3) Yearsprior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In:philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp[san Joaquin Mother And Child Hospital, San Joaquin, Iloilo]or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To San Joaquin Mother Child Hospital, San Joaquin, Iloilo.risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Adhesive/ Surgical Tape, 1 Inch 1200 2 Arm Sling, Large 50 3 Arm Sling, Medium 50 4 Asepto Syringe/ Bulb Syringe 300 5 Autoclave Tape 1" 20 6 Blood Administration Set 500 7 Blood Lancet, G23, 200's 50 8 Cadaver Bag, Adult 50 9 Cadaver Bag, Pedia 10 10 Chromic Suture 3/0, Cutting, 12's 20 11 Chromic Suture 2/0, Cutting, 12's 40 12 Cotton Balls, 300's 50 13 Cotton Roll, 400gms 20 14 Ecg Electrodes Adult , 50's 10 15 Ecg Paper, 80mm X 20m 30 16 Elastic Bandage, 2" 200 17 Elastic Bandage, 4" 400 18 Elastic Bandage 6" 100 19 Endotracheal Tube, 3.0 30 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. 20 Endotracheal Tube, 4.0 30 21 Endotracheal Tube, 6.0 30 22 Endotracheal Tube, 7.0 400 23 Endotracheal Tube, 7.5 200 24 Examination Gloves, Latex, Powdered- Free, 100's , Large 200 25 Examination Gloves, Latex Powdered- Free, 100's Medium 400 26 Face Mask, Ear Loop, Disposable, 50's 300 27 Feeding Tube Or Ngt, Fr. 10 60 28 Feeding Tube Or Ngt, Fr. 14 100 29 Feeding Tube Or Ngt, Fr. 16 200 30 Feeding Tube Or Ngt, Fr. 16, Silicone 200 31 Feeding Tube Or Ngt, Fr. 8 70 32 Foley Catheter 2-way Fr. 14 200 33 Foley Catheter 2-way Fr. 16 500 34 Gloves Surgical, Powder-free, Size 6.5, 50's 150 35 Gloves Surgical, Powder-free, Size 7.0, 50's 200 36 Gloves Surgical, Powder-free, Size 7.5, 50's 100 37 Heplock / Heparin Cap 1000 38 High Level Disinfectant For Instruments, Gal 10 39 Infrared Thermometer, Digital, Forehead, Medical-grade 6 40 Iv Cannula G. 18, 100's 50 41 Iv Cannula G. 20, 100's 80 42 Iv Cannula G. 22, 100's 80 43 Iv Cannula G. 24, 100's 100 44 Iv Cannula G. 26, 100's 100 45 Iv Macroset 1800 46 Iv Microset 1800 47 Iv Starter Kit 800 48 Lubricating Gel, Tube, 80-150gms 50 49 Mechanical Ventilator Tubings, Adult Set 50 50 Medical Chart Holder, Plastic Or Steel Material, Short-size 40 51 Nasal Oxygen Cannula, Adult 1000 52 Nasal Oxygen Cannula, Pedia 200 53 Nebulizer Kit With Mask, Adult 500 54 Nebulizer Kit With Mask, Pedia 200 55 Nebulizer Machine/ Compressor, Heavy-duty 10 56 Oxygen Face Mask With Tubing, Adult 300 57 Oxygen Face Mask With Tubing, Pedia 200 58 Oxygen Regulator With Humidifier 30 59 Soluset / Infusion Set With Burette 2000 60 Syringe 3ml, Disposable With Needle, 100's 50 51 Syringe 5ml, Disposable With Needle, 100's 50 62 Syringe 10ml, Disposable With Needle, 100's 80 63 Syringe 1ml (tuberculin), 100's 20 64 Syringe 1ml (insulin), 100's 20 65 Bag Valve Mask, Adult 6 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Sjh-24-1358-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Adhesive/ Surgical Tape, 1 Inch 2 Arm Sling, Large 3 Arm Sling, Medium 4 Asepto Syringe/ Bulb Syringe 5 Autoclave Tape 1" 6 Blood Administration Set 7 Blood Lancet, G23, 200's 8 Cadaver Bag, Adult 9 Cadaver Bag, Pedia 10 Chromic Suture 3/0, Cutting, 12's 11 Chromic Suture 2/0, Cutting, 12's 12 Cotton Balls, 300's 13 Cotton Roll, 400gms 14 Ecg Electrodes Adult , 50's 15 Ecg Paper, 80mm X 20m 16 Elastic Bandage, 2" 17 Elastic Bandage, 4" 18 Elastic Bandage 6" 19 Endotracheal Tube, 3.0 20 Endotracheal Tube, 4.0 21 Endotracheal Tube, 6.0 22 Endotracheal Tube, 7.0 23 Endotracheal Tube, 7.5 24 Examination Gloves, Latex, Powdered- Free, 100's , Large 25 Examination Gloves, Latex Powdered- Free, 100's Medium 26 Face Mask, Ear Loop, Disposable, 50's 27 Feeding Tube Or Ngt, Fr. 10 28 Feeding Tube Or Ngt, Fr. 14 29 Feeding Tube Or Ngt, Fr. 16 30 Feeding Tube Or Ngt, Fr. 16, Silicone 31 Feeding Tube Or Ngt, Fr. 8 32 Foley Catheter 2-way Fr. 14 33 Foley Catheter 2-way Fr. 16 34 Gloves Surgical, Powder-free, Size 6.5, 50's 35 Gloves Surgical, Powder-free, Size 7.0, 50's 36 Gloves Surgical, Powder-free, Size 7.5, 50's 37 Heplock / Heparin Cap 38 High Level Disinfectant For Instruments, Gal 39 Infrared Thermometer, Digital, Forehead, Medical-grade 40 Iv Cannula G. 18, 100's 41 Iv Cannula G. 20, 100's 42 Iv Cannula G. 22, 100's 43 Iv Cannula G. 24, 100's 44 Iv Cannula G. 26, 100's 45 Iv Macroset 46 Iv Microset 47 Iv Starter Kit 48 Lubricating Gel, Tube, 80-150gms 49 Mechanical Ventilator Tubings, Adult Set 50 Medical Chart Holder, Plastic Or Steel Material, Short-size 51 Nasal Oxygen Cannula, Adult 52 Nasal Oxygen Cannula, Pedia 53 Nebulizer Kit With Mask, Adult 54 Nebulizer Kit With Mask, Pedia 55 Nebulizer Machine/ Compressor, Heavy-duty 56 Oxygen Face Mask With Tubing, Adult 57 Oxygen Face Mask With Tubing, Pedia 58 Oxygen Regulator With Humidifier 59 Soluset / Infusion Set With Burette 60 Syringe 3ml, Disposable With Needle, 100's 61 Syringe 5ml, Disposable With Needle, 100's 62 Syringe 10ml, Disposable With Needle, 100's 63 Syringe 1ml (tuberculin), 100's 64 Syringe 1ml (insulin), 100's 65 Bag Valve Mask, Adult Conditions: 1. Partial Delivery Is Not Allowed 2. Expiration Date Of All Items Must Be At Least Two (2) Years From The Date Of Delivery. _______________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.