Valve Tenders

Description: Description :kit, Wiper Motor Assembly For 1400 Hp/1600 Hp Demu Dpc As Per Elgi Part No. (i)eu6545010 Wiper Motor Assy. Lh- 1 No. (ii)eu654501a Wipe r Motor Assy. Rh-1 No. (iii) Eu6545000 Control Valve Assy.- 2 Nos. (iv) Eu6503002 Wiper Arm Assy.-2 Nos. (v) Eu6504000 Wiper Blade Assy-2 Nos. (vi) Eu654 5040 Support Arm Pin Assy.-2 Nos. Make: Elgi Or Similar. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description: Preliminary information for the purpose of shortening the deadline for receipt of offers - General guidelines (construction work) Daycare center "in der Eck" New building - Technical building equipment (tga) Start of work: February 2026 Completion of work: October 2026 Rough dimensions of shell construction Drainage: Pipeline Kg 2000-dn 110 to Dn 160: 650.0 m Bend Kg 2000-dn 110 to Dn 160: 270.0 pcs Drinking water Pe pipe: 50.0 m District heating pipe Eco Flex Thermo Twin 50/4.6: 50.0 m Grease separator: 1.0 pcs Kg 410 Sanitary The Drinking water is supplied via the public water supply network of the Steinbach water supply company. For hygiene reasons, hot water is supplied via decentralized, electronic instantaneous water heaters. The entire drinking water consumption is recorded in the technical center. The entire network of drinking water pipes is located in the suspended ceiling of the building. To ensure drinking water hygiene, the pipes are looped through. Each section of the looped drinking water pipe is equipped with a hygiene station that ensures that the water in the pipes is exchanged every 72 hours. The entire drinking water network is made of stainless steel and the insulation is aluminum-coated mineral wool. Rough dimensions: Stainless steel system pipe Crnimo DN 12-40 including insulation: 560 m Hygiene flushing station drinking water: 5 pieces Automatic backwash dirt filter drinking water: 1.0 piece Instantaneous heater: 30.0 pieces Soundproof socket pipe - DN 50 to DN 110: 250 m Floor drains: 5.0 pieces Urinals: 6.0 pieces Toilet system: 21.0 pieces Disabled toilet system: 2.0 pieces Wash basin: 29.0 pieces Shower: 3.0 pieces All systems including assembly modules, ceramics and accessories. Kg 420 Heating The building is heated by two air-water heat pumps, which are located outside in the direction of the garbage area. A low-pressure buffer tank for the underfloor heating is planned in the building. The pipes laid in the suspended ceilings and central unit are made of stainless steel, the insulation of the pipes is made of aluminum-coated mineral wool. The pipes laid in the screed for the underfloor heating are planned to be made of Pe-xa. Rough dimensions: Air-water heat pump 33 kW: 2.0 pieces Heat distributor including 2 pump groups: 1.0 piece Stainless steel system pipe Crnimo Dn 15-65 including insulation: 600 m Buffer storage 1,000 liter: 1.0 piece Floor area: 1,900 m2 Pipe length underfloor heating: 11,000 m Fbh Heat distributor: 10.0 pieces Msr technology: 1.0 Psch Kg 430. Ventilation system The interior rooms are mechanically ventilated and de-ventilated. The supply air is reheated via electric heating registers if necessary and supplied to the rooms. The exhaust air is also collected in the rooms via separate exhaust air elements and discharged through the ventilation units. All air conditioning systems are equipped with heat recovery. The ventilation system is controlled to ensure a constant air exchange. The air conditioning unit (air conditioning unit) for the kitchen is placed outside. For the remaining rooms, decentralized ventilation units are installed in the positions provided for them in the suspended ceilings. Overview of air handling units: Ventilation unit Short name Area Air volume Air handling unit 01 RLT-01 Kitchen 2,500 m³/h Air handling unit 02 RLT-02 Technical center 270 m³/h Air handling unit 03 RLT-03 Toilet area general 520 m³/h Air handling unit 04 RLT-04 Children's bathrooms-u3 360 m³/h Air handling unit 05 RLT-05 Children's bathrooms-ü3 810 m³/h Rough dimensions: Air handling unit: 5.0 pieces Air ducts Rectangular galvanized steel Incl. fittings: 815.0 m2 Spiral seam duct galvanized steel Dn100 - 250 Incl. fastening and fittings: 190.0 m Roof hood for fort and Outside air: 8 pieces of plate valves, supply and exhaust air: 60.0 pieces, fire dampers: 16.0 pieces, Kg 434. Air conditioning systems The server room of the building is cooled with a split air conditioning unit to prevent the servers from overheating. Rough dimensions: Outdoor and indoor unit including connection and fastenings: 1.0 piece Kita "in Der Eck" new building - technical building equipment (tga) Start of work: February 2026 Completion of work: October 2026 Rough dimensions shell drainage: Pipeline Kg 2000-dn 110 to DN 160: 650.0 m Bend Kg 2000-dn 110 to DN 160: 270.0 pieces Drinking water Pe pipe: 50.0 m District heating pipe Eco Flex Thermo Twin 50/4.6: 50.0 m Grease separator: 1.0 piece Kg 410 Sanitary The drinking water supply is provided via the public water supply network of the water supply company Wasserversorgung Steinbach. For hygienic reasons, the hot water supply is realized via decentralized, electronic instantaneous water heaters. The entire drinking water consumption is recorded in the technical center. The entire network of drinking water pipes is located in the suspended ceiling of the building. To ensure drinking water hygiene, the pipes are looped through. Each section of the looped drinking water pipe is equipped with a hygiene station that ensures that the water in the pipes is exchanged every 72 hours. The entire drinking water network is made of stainless steel and the insulation is aluminum-coated mineral wool. Rough dimensions: Stainless steel system pipe Crnimo DN 12-40 including insulation: 560 m Hygiene flushing station drinking water: 5 pieces Automatic backwash dirt filter drinking water: 1.0 piece Instantaneous heater: 30.0 pieces Soundproof socket pipe - DN 50 to DN 110: 250 m Floor drains: 5.0 pieces Urinals: 6.0 pieces Toilet system: 21.0 pieces Disabled toilet system: 2.0 pieces Wash basin: 29.0 pieces Shower: 3.0 pieces All systems including assembly modules, ceramics and accessories. Kg 420 Heating The building is heated by two air-water heat pumps, which are located outside in the direction of the garbage area. A low-pressure buffer tank for the underfloor heating is planned in the building. The pipes laid in the suspended ceilings and central area are made of stainless steel, the insulation of the pipes is made of aluminum-coated mineral wool. The pipes laid in the screed for the underfloor heating are planned to be made of Pe-xa. Rough dimensions: Air-water heat pump 33 kW: 2.0 pieces Heat distributor including 2 pump groups: 1.0 piece Stainless steel system pipe Crnimo Dn 15-65 including insulation: 600 m Buffer storage 1,000 liter: 1.0 piece Floor area: 1,900 m2 Pipe length underfloor heating: 11,000 m Fbh Heat distributor: 10.0 pieces Msr technology: 1.0 Psch Kg 430. Ventilation system The interior rooms are mechanically ventilated. The supply air is reheated via electric heating registers if necessary and supplied to the rooms. The exhaust air is also collected in the rooms via separate exhaust air elements and discharged through the ventilation units. All air conditioning systems are equipped with heat recovery. The ventilation system is controlled to ensure a constant air exchange. The air conditioning unit (air conditioning unit) for the kitchen is placed outside. For the remaining rooms, decentralized ventilation units are installed in the positions provided for them in the suspended ceilings. Overview of air handling units: Ventilation unit Short name Area Air volume Air handling unit 01 RLT-01 Kitchen 2,500 m³/h Air handling unit 02 RLT-02 Technical center 270 m³/h Air handling unit 03 RLT-03 Toilet area general 520 m³/h Air handling unit 04 RLT-04 Children's bathrooms-u3 360 m³/h Air handling unit 05 RLT-05 Children's bathrooms-ü3 810 m³/h Rough dimensions: Air handling unit: 5.0 pieces Air ducts Rectangular galvanized steel Incl. fittings: 815.0 m2 Spiral seam duct galvanized steel Dn100 - 250 Incl. fastening and fittings: 190.0 m Roof hood for fort and Outside air: 8 pieces Plate valves for supply and exhaust air: 60.0 pieces Fire dampers: 16.0 pieces Kg 434. Air conditioning systems The server room of the building is cooled with a split air conditioning unit to prevent the servers from overheating. Rough dimensions: Outdoor and indoor unit including connection and fastenings: 1.0 pieces

Description: Rfq#2139518_spare For Cci Control Valves

Description: CATEGORY: Valve Brake Pneumatic , Front Wind Shield LH , Front Wind Shield RH , Combination Switch , Wiper Motor , Wiper Arm , Rear Wind Shield RH , Wiper Timer , Sliding glass , Rear Wind Shield LH , Head Light , Rear Wind Shield CTR , Passenger Door Glass

Description: Solenoid Valve (panto) For E-70 Brake System

Description: CATEGORY: GATE VALVE , GATE VALVE 3000# , MOISTURE TRAP , STRAINER

Description: CATEGORY: Engine Oil Filter 6675517 , Pin, Pivot 7135590 , Cap Hydraulic 6727475 , Bushing 6730997 , Seal 6658228 , Valve cartridge 7304852 , Kit Coupler 6679837 , Seal 6678226 , Solenoid assembly 7136559 , Value Proportional 6698434 , Switch H 6674316 , Sensor Pressure 7321588 , Sensor speed 6693921 , Sensor Engine Temp 6718414 , Pump Primer Hand 6657734 , Sensor Fuel 7286464 , Cable Main 7214545 , Tooth Pin 6717947A , Belt 70166624 , Nut 94037611 , Hydraulic Hose 7179366 , Starter Motor 6685190 , Drive Belt 7146391 , Nylon Tube 9095706111 , Cap 1028654733 , Hose Cps 9095717804 , Air Filter Complete 9095951600 , Air Filter Complete 9095951500 , Hose Clip 0347439900 , Elbow 9095702700 , Straight Coupling 0581020104 , Stop Cable 9095720200 , Temp gauge water 1619163700 , Water Pipe 9095720900 , Oil Filter Assembly 9095185500 , Oil Filter 1613610500 , Copper Tube 90951077700 , Flexible Hose 9095702600 , Fan belt x0300450 , Nipple 1 1.4 inch

Description: CATEGORY: Heating element 1 point 5 KW oblique 2 KW, Triangular type best quality , Round heating element 1 point 5 KW oblique 2 KW best quality , Big thermostate 75 degree C best quality , Heating element 3 KW oblique 4 point 5 KW suitable for instant Geyser best quality , Indicator lamp red colour for gyser Round type best quality , Small thermostate 75 degree C best quality , Indicator lamp green colour for gyser Round type best quality , Thermostat for Racold Geyser best quality , Thermostat 0 degree C to 75 degree C range best quality , PVC insulated sheated 3 core flat submersible cable 2 point 5 Sqmm , Air release valve best quality , Copper wire 2.5 Sqmm size , Heating element of recold 1.5 KW best quality , Solar water heater element 2KW oblique 3KW best quality , Metal plug with Socket 16 oblique 20 Amps , 15 Amps Super Plug tops , SSC 15 Amps , MCB SP 16 Amp , Pressure motor switch, Male thread socket type best quality , Single switch 15 Amps , MCB SP 20 Amp , Copper wire 1 point 5 Sqm size , Heating element for bajaj majesty as per sample , Under Water Light 6 oblique 8 Watts Multicolour SS Body , PVC insulated sheated 3 core flat submersible cable 4 point 0 Sqmm

Description: Concentric Valve Assembly As Per Ftrtipl Part No. 850101000a For M/s. Ftrtipl Compressor.

Description: CATEGORY: AUTOMATED INGOT MACHINING CENTER WITH ALL AUXILARIES , 14 TPI KNURLING TOOL WITH HOLDER , ROLLER OF SPECIAL WORK REST , POWER OPERATED SELF CENTERING 3 JAW CHUCK WITH ONE SET OF STANDARD SOFT JAWS AND HARD JAWS , ROLLER OF ROLLER STEADY REST , GANTRY INGOT HOLDING GRIPPERS FOR ALL THE SIZE RANGES , ENCODER USED IN SPINDLE ORIENTATION OF TURNING CENTER , MARKING MACHINE CONTROLLER , COOLANT MAIN PUMP WITH MOTOR , HYDRAULIC SEALS EQUAL TO INSTALLED CAPCITY , LIVE RIGHT ANGLE DRILL MILL HEAD 1 is TO 1 RATIO EXTERNAL COOLANT TYPE BMT 85 SUITABLE FOR ER 50 COLLET , SPECIAL SLIT TYPE BORING TOOL HOLDER FOR DIA 60 MM ANTI VIBRATION BORING BAR OF LENGTH 1040 mm with a holding length of 240 MM , LIVE IN LINE DRILL MILL HEAD EXTERNAL COOLANT TYPE BMT 85 SUITABLE FOR ER50 COLLET , WORK OFFSET PROBE RECEIVER TRANSMITTER WITH ADAPTER AND OTHER ACCESSORIES LIKE RUBY STYLUS , HYDRAULIC AND PNEUMATIC SOLENOID VALVE AND VALVE COILS EQUAL TO INSTALLED CAPACITY , LASER TYPE SENSOR USED INSIDE CNC FOR PART DETECTION , PROXIMITY SWITCH USED IN SLAT CONVEYOR INDEXING , MARKING MACHINE PUNCH , ER 50 COLLETS DIA 6 TO 34 MM A TOTAL OF 28 NOS IN A SET IN A RANGE OF 1 MM EACH , MUD BAG FILTERS CARTRIDGE FILTERS , ROLLERS SPLIT BUSH LINK ROD AND LINK USED FOR REMOVAL OF CHIP FROM THE MACHINE FOR ONE COMPLETE CONVEYOR , SENSOR USED FOR PART DETECTION IN THE GRIPPER , DRIVE BELTS FOR THE SPINDLE