Tenders of Uranium Corporation Of India Limited

BOQ ITEMS: Dismantling and reeling of 3C X 120 / 150Sqmm 6.6 KV Copper / Aluminium XLPE double armoured cable (including removal of clamps and support from pre-erected cable trays inside (36 - 45) degree incline / raise, Laying and Dressing of 3C X 120 / 150Sqmm 6.6KV Copper / Aluminium XLPE double armoured cable on pre-erected cable tray / support including clamping of the same, Laying Dressing and saddling of 1 x 3 1/2C x 185 Sqmm. Copper / Aluminium armoured cable through drift / 45 degree incline raise, Laying dressing and saddling of 1 x 3 1/2C x 120 Sq.mm. Aluminium armoured cable, Laying dressing and saddling of 1 x 3 1/2C / 2C x 4 / 16 / 35 / 50/70 Sqmm Aluminium armoured cable, Dismantling and reeling of 1 x 3 1/2C x 185 Sqmm. Copper / Aluminium armoured cable, Dismantling and reeling of 1 x 3 1/2C x 120 Sqmm. Aluminium armoured cable, Dismantling and reeling of 1 x 3 1/2C / 2C x 4 / 16 / 35 / 50 / 70 Sqmm. Aluminium armoured cable, Dismantling and Shifting of 10 KVA / 5 KVA lighting Transformer at various levels of U/G Mines, Dismantling and Shifting of Non - FLP Gate End Box 300A 440 Volts at various levels of U/G Mines, Erection of MS ladder type cable trays with supports. Including painting of trays supports with primer and synthetic Enamel paint

CATEGORY: Manpower Outsourcing Services - Minimum wage - Unskilled; Others; Mazdoor/Labour

BOQ ITEMS: Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth upto 30 cm. Measured at a height of 1.0 metre above ground level and removal of rubbish up to a distance of 50 mtr out side the peripfery of the area cleared. , Earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. Lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting as directed by Engineer adequate protection to be taken during excavation or drilling or blasting transporting the excavated soil for all lead and stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 Mtrs. in the area as directed by the Engineer all complete as per drawing specification and direction of the EIC. a) All types of soil ��, Earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pits culverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the Engineer with selected spoil within a lead of 100 mtr. , Supply mix place in position compact and cure cement concrete 1 isto 2 isto 4 one cement isto two coarse sand isto four graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the Engineer and including cost of centring and shuttering ., Supply mix place in position compact and cure including testing of concrete specimens finishing surfaces in foundation as per specifications drawings and directions of the Engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in foundations excluding cost of centring shuttering and including cost of reinforcement. M20 RCC or PCC , Supply mix place in position compact and cure including testing of concrete specimens finishing surfaces in superstructures as per specifications drawings and directions of the Engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure excluding cost of centring shuttering and reinforcement. M20 RCC all complete as per direction of EIC., Providing and fixing, bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 SWG annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pins chairs nails supports of reinforcement etc with all materials and labour complete as per drawings specifications and directions of Engineer excluding cost of reinforcement. , Structural steel work riveted bolted or welded in built up sections trusses and framed work includig cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete as per direction of EIC., Providing and fixing ISI marked flush door shutters conforming to IS2202 Part I decorative type core of block board construction with frame of first class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws all complete as per direction of EIC., Centring and shuttering including strutting propping etc and removal of form for suspended floor roof landings balconies and access platforms, Supply and laying in position brick work with designate 75 bricks compressive strength not less than 75 Kg per Sqcm in foundation upto plinth etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications including cost of cement all complete as per direction of EIC., Supply and laying in position brick work with designate 75 bricks compressive strength not less than 75 Kg perSqCm in super structures etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications including cost of cement as per direction of EIC. , Half brick masonry with common burnt clay FPS non modular bricks of class designation 7.5 in superstructure above plinth level up to floor V level cement mortar 1 isto 4 one cement isto four coarse sand all complete as per direction of EIC including cost of all meterials labours and scaffolding etc., Providing and fixing factory made ISI marked steel glazed doors windows and ventilators side or top or centre hung with beading and all members such as F7DF4B K1 1 B and K12 B etc. complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment. Fixing with 15 into 3 mm lugs 10 cm long embedded in cement concrete block 15 into 10 into 10 cm of CC. 1 isto 3 isto 6 one Cement isto three coarse sand isto six graded stone aggregate 20 mm nominal size, 15mm thick minimum plastering with 1 isto 6 one cement isto 6 coarse sand to all faces of walls channels in roof and other structures at various elevations including mixing laying, finishing curing and necessary scaffolding work complete as per drawings specifications and instructions of the EIC with all materials and labours including cement. Work will be done at any height., Applying neat cement punning including cost of all materials labours etc. Complete as per direction of EIC including cost of cement, Supplying and applying two or more coats of white wash with lime to walls ceiling etc. At various elevations including preparation of surfaces cleaning etc.complete with all materials labour scaffolding work as per specifications ., Supplying and finishing walls with Acrylic Smooth exterior paint of required shade New work Two or more coat applied at the rate 1.67 ltr per10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10 sqm all complete as per direction of EIC., Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two or more coats on new or old work over a priming coat complete as per specification and direction of EIC. , Making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 one cement isto 3 coarse sand zone III isto six graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth., Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including bend shoe other fittings and jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Single socketed pipes 110 mm diameter, Providing and fixing on wall face unplasticised Rigid PVC rain water pipes or Vent Pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Single socketed pipes. 75 mm diameter including bend shoes coupler cowel etc all complete as per direction of EIC, Providing and fixing water closet squatting pan Indian type WC pan with 100 mm sand cast Iron P or S trap 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device handle lever conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern WC pan of size 580 into 440 mm with integral type foot rests., Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe white PVC automatic flushing cistern with fittings standard size G I or PVC flush pipe for back and front flush with standard spreader pipes with fittings GI clamps and CP brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required Range of two squatting plates with 5 litre PVC automatic flushing cistern all complete as per direction of EIC., Providing and fixing wash basin with CI brackets 15 mm CP Brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630 into 450 mm with a single 15 mm CP brass pillar tap., Making soak pit 2.5 m diameter 3.0 metre deep with 45 into 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter 1.8 m long complete as per standard design With common burnt clay FPS non modular bricks of class designation 7.5 all complete as per direction of EIC., Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of EIC.15mm nominal outer dia Pipes, Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of EIC. 20mm nominal outer dia Pipes, Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of EIC. 25mm nominal outer dia Pipes, Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of EIC. 50mm nominal outer dia Pipes, Providing and fixing CP brass bib cock of approved quality conforming to IS8931 15 mm nominal bore, Providing and fixing CP brass stop cock of approved quality conforming to IS8931 15 mm nominal bore, Providing and placing on terrace at all floor levels polyethylene water storage tank 1000 Litres capacity IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank., Providing and fixing ball valve brass of approved quality High or low pressure with plastic floats complete. 25 mm nominal bore, Supply and fixing PVC flexible waste pipe 32 or 40mm NB, Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm long 15 mm nominal bore, Providing and fixing on wall face unplasticised Rigid PVC rain water pipes or Vent Pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Single socketed pipes. 75 mm diameter including bend shoes coupler cowel etc all complete as per direction of EIC, Providing and fixing 600 into 450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete., Providing and laying damp proof course 40mm thick with cement concrete 1isto 2 isto 4 one cement isto 2 coarse sand zoneIII 4 graded stone aggregate 12.5mm nominal size all complete as per direction of EIC., Providing hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses bands copings bed plates anchor blocks plain window sills and the like including the cost of required centering shuttering but excluding cost of reinforcement with 1 isto 1.5 isto 3 one cement isto 1.5 coarse sand zoneIII isto 3 graded stone aggregate 20 mm nominal size all complete as per direction of EIC., Grading roof for water proofing treatment with Cement concrete 1 isto 2 isto 4 one cement isto two coarse sand isto four graded stone aggregate 20mm nominal size including cost of cement all complete as per direction of EIC., Providing and laying Ceramic glazed floor tiles of size 300 into 300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS15622 of approved make in colours such as White Ivory Grey Fume Red Brown laid on 20 mm thick cement mortar 1 isto 4 one Cement isto four Coarse sand Jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of EIC., Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by EIC in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 one cement isto three coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of EIC. , Providing and fixing factory made P V.C door frame of size 50 into 47 mm with awall thickness of 5 mm made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 into 15 mm MS square tube the vertical door frame profiles to be reinforced with 19 into 19 mm MS square tube of 19 gauge EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using MS screws of 65 or 100 mm size complete as per manufacturers specification and direction of EIC., Providing and fixing to existing door frames 30 mm thick factory made Polyvinyl Chloride PVC door shutter made of styles and rails of a uPVC hollow section of size 60 into 30 mm and wall thickness 2 mm plus negative 0.2 mm with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of MS galvanised or plastic brackets of size 75 into 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised MS tube of size 25 into 20 mm and 1 mm plus negative 0.1 mm wall thickness. The lock rail made up of H section a uPVC hollow section of size 100 into 30 mm and 2 mm plus negative 0.2 mm wall thickness fixed to the shutter styles by means of plastic or galvanised MS U cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm plus negative 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised MS rod and fastened with nuts and washers complete as per manufacturers specification and direction of EIC., Providing and fixing ISI marked oxidised MS handles conforming to IS4992 with necessary screws etc. complete 125mm, Providing and fixing ISI marked oxidised MS Towe bolt black finish Barrel type with necessary screws etc. complete 150 into 10mm, Providing and fixing IS 12817 marked stainless steel butt hinges with stainless steel screws etc. complete. 125 into 64 into 1.90mm, Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. All kinds of soil as per direction of EIC.

CATEGORY: PVC Aluminium cable as per IS;694 (Q3)

CATEGORY: Online Ups 5 Kva For Critical Infrastructures-IS:13947 (Q3)