Transportation Tenders

Details: The Finnish Transport and Communications Agency Traficom has the objective of establishing a dynamic purchasing system (dps) targeted by expert services for smart transport,maion and mobility services. “Acquisn of Expert Services may be Cusen and Intelligent Transportation Services, and Other Intelligence, Road Automation, Road Management and Technologies for Development and Implementation of National and International Tasks, As:” • From the Quality of Applications for Eu Projects or Financial Programs, and Change Reporting • From the National, Emerging and Implementation” Preparation of meetings and occasions » • Producing information and findings » Support for authorities in Technical and Legal Questions,'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s mandates may be Determinate Projects or Long-term Service Purchases for Either Traficom or the Transport Agency's Impactive. As a rule, execution of assignments requires scientific, technical or research skills. Assignments should usually be reviewed by the report and the report Introduction Ma Jol Either Finnish or English.”, “The mandates are usually €15,000 to €70,000 and the mandates are $10-20 per year. “All the data presented in this Prior Information Notice are Preliminary and Preliminary Information. Preliminary notice does not link the Purchase Entity to any Solution. """

Details: Amendment 1 - 10/18/2024 amendment 1 Issued 10/18/24 To Incorporate The Following: Responses To Questions; Revisions To Initial Synopsis/soliciaition Notice; Response Date Extension To 11/12/24, 4pm. The Amendment Is Provided As An Attachment To This Notice. synopsis/soliciaition Notice Updated 10/18/24 Per Amendment 1 Revisions: procurement Description through Its Design Excellence Program, The U.s. General Services Administration (gsa) Commissions Our Nation’s Most Talented Creative Professionals To Design Outstanding Federal Workplaces. These Projects Embody An Exemplary Integrated Process Whose Results Deliver Enduring Value To Taxpayers. Gsa Defines Quality As The Thoughtful Expression Of Artistry, Local Culture, And Democratic Values Like Civic Participation, Accessibility, And Transparency, Achieved In Balance With Affordability, Constructability, Reliability, And Industry-leading Sustainable Performance. Design Excellence Is The Means By Which Gsa Realizes The Guiding Principles For Federal Architecture, Which President Kennedy Authorized In 1962, And It Is One Of The Agency’s Primary Vehicles For Catalyzing Positive, Inclusive Change In Local Communities. continuing This Legacy Of World-class Public Architecture, Gsa Announces An Opportunity For Design Excellence For Projects In Occupied Federally Owned Or Leased Office Buildings, Courthouses, And Land Ports Of Entry (lpoe's) Throughout Region 9. These Projects Are To Demonstrate The Value Of True Integrated Design That Balances Aesthetics, Cost, Constructability, And Reliability; And Create Environmentally Responsible And Superior Workplaces For Civilian And Federal Employees. this Is A Multiple Award Indefinite Delivery Indefinite Quantity (idiq) Contract(s) For Architect Engineer (ae) Services Covering Projects Located In The Following Four (4) Geographic Zones Of Region 9: zone 1 - States Of Arizona And Nevada zone 2 - Northern California (california Counties Of Del Norte, Siskiyou, Modoc, Humboldt, Trinity, Shasta, Lassen, Mendocino, Tehama, Plumas, Glenn, Butte, Sierra, Lake, Colusa, Yuba, Nevada, Placer, Sonoma, Napa, Yolo, Sutter, El Dorado, Marin, Solano, Sacramento, Amador, Alpine,san Francisco, Contra Costa, San Joaquin, Calaveras, Toulumne, Mono, Inyo, San Mateo, Alameda, Stanislaus, Mariposa, Santa Cruz, Santa Clara, Merced, Madera, San Benito, Fresno, Monterey, Kings, Tulare) zone 3 - Southern California (california Counties Of San Diego, Imperial, Orange, Riverside, Santa Barbara, Ventura, Los Angeles, San Bernardino, San Luis Obispo, Kern) zone 4 - State Of Hawaii And Pacific Territories multiple Awards May Be Made As A Result Of This Announcement, And The Government Anticipates Making Between Three (3) To Six (6) Awards Per Geographic Zone. However, The Ultimate Number Of Contracts Per Zone Will Be Determined By Gsa After The Assessment Of Qualified Contractors During The Solicitation Stage To Ensure Coverage In All Zones. this Procurement Is A 100% Total Small Business Set Aside. Prime Ae Firms Must Be A Small Business In Order To Be Considered. Consultants To The Prime Ae Firms Are Not Required To Be Small Businesses. the Naics Code Is 541310 - Architectural Services; The Small Business Size Standard Is $12.5 Million (average Annual Receipts). prime Ae Firms Who Are Interested In Performing Work In Multiple Zones Must Submit A Separate Technical Qualification Package For Each Zone. The Prime Ae Firms Must Have An Active Main Office And/or Branch Office Located Within The Applicable Geographical Zone As Of The Date Proposals Are Due In Order To Be Considered; If An Award Is Issued, The Zonal Office Must Remain Open And Active For The Duration Of The Contract Period. Consultants To The Prime Ae Firm Are Not Required To Have An Active Office In The Geographical Zone The Prime Ae Firm Will Be Performing In. An Active Main Office And/or Branch Office Is Defined As A Non-temporary Office From Which Business Is Regularly Conducted By The Prime Ae Firm. Prime Ae Firms Will Be Required To Certify They Meet The Specified Local Office/ Geographic Limitations In Your Submission. at The Time Of Technical Qualification Package Submission, Interested Prime Ae Firms Must Have An Active Registration In The System For Award Management (sam). Active Registration Must Also Be Complete As Applicable If The Prime Ae Firm Is A Partnership, Corporation, Association, Joint Venture, Or Other Legal Entity. Prime Ae Firms Will Be Required To Provide A Copy Of Your Active Sam Record As Well As Any Executed Agreements If Applicable (such As An Executed Joint Venture Agreement) In Your Submission. the Awarded Contracts Will Be For A Period Of One (1) Base Year With Four (4) Consecutive One (1) Year Option Periods. the Minimum Guarantee Will Be $1,000 For The Base Year Period Only. the Total Aggregate Maximum Order Limitation (mol) Per Awarded Contract, Covering The Base Year Period And Four (4) Consecutive One (1) Year Option Periods, Shall Not Exceed $25 Million. task Orders Issued Under The Awarded Contracts May Range In Value From $10,000.00 To $4,000,000.00, However There Will Be No Single Task Order Minimum Or Maximum Limit Specified. Prime Ae Firms Will Be Required To Comply With Brooks Act Procedures And Applicable 6% Statutory Limitation. this Procurement Will Be Conducted In Accordance With Brooks Act Public Law 92-582, And As Implemented In Federal Acquisition Regulation (far) Part 36.6, General Services Administration Acquisition Manual/ Regulation (gsam/ Gsar) Part 536.6. Under This Process The Government Will Award To The Most Highly Qualified Prime Ae Firms With Whom It Can Negotiate A Fair And Reasonable Price. this Is A Request For Technical Qualifications Only; This Is Not A Request For Proposal. An Ae Evaluation Board Comprised Of Gsa Personnel Will Evaluate The Technical Qualification Packages. general Description Of Contract Services prime Ae Firms, And Consultants As Applicable, Are Required To Be Licensed/ Registered Within The Applicable State(s) For Each Geographic Zone They Are Interested In And Must Conform To All Laws, Rules, And Requirements Of That State Governing The Profession Of Architecture Or Engineering. the Services Required Under This Contract May Include, But Are Not Limited To, The Following: 1. Comprehensive Design Services Including The Preparation Of Construction Documents For Repair And Alteration, And Tenant Improvement Projects. Typical Projects May Include Repair, Improvement And/or Remodeling Of Building Interior Space, And Building Systems And Features, Including But Not Limited To: Interior And Exterior Finishes, Landscaping, Civil, Mechanical, Plumbing, Electrical, Structural, Fire Safety, Blast, Anti-ram, And Ballistic Protection, Elevators, Environmental, And Roofing Components/systems. Project Locations/ Spaces May Include Courthouse And Federal Facilities, Historic Buildings, Border Stations, Child Care Facilities, Lease Locations, Renovation And/or Alteration Of Fire Protection Systems, Administrative Facilities, Warehouses, Road And Parking Lots, Walkways, Plazas, And Other Existing Systems And Facilities. 2. Comprehensive Design Services Including The Preparation Of Construction Documents For New Construction Of Courthouses And Federal Facilities. 3. Preparation Of Designs, Plans, Specifications, Estimates, Record Drawings, Space Planning, Technical Studies And Reports, Surveys And Construction Inspection Services For Projects. Projects May Involve Work In Specialty Areas Such As Alterations In Historic Buildings Or Asbestos Abatement Work. 4. Professional Disciplines Required May Include Architectural Designer, Landscape Designer, Mechanical Engineer, Structural Engineer, Hvac Engineer, Electrical Engineer, Civil Engineer, Historic Preservation Architect, Acoustical Engineer, Blast Consultant, Interior Designer, Cost Estimator, Cad Operator, Building Information Management, Fire Safety, Security Systems Consultant, Asbestos, Acoustical, Seismic, Environmental Engineering, Energy Consultant, Telecommunication, Building Forensics, Waterproofing, And Geotechnical Engineering. These Professional Disciplines May Also Assist Gsa Staff Engaged In Scope Development, Shop Drawing Review, Master Planning, Feasibility Studies, Programming, Interior Design, Change Management, Design Review, Construction Administration And Inspection, Elevator Evaluation/design, Signage Design, And Various Technical Studies Including Building Engineering Reports, Workplace Engagement Studies, Program Of Requirements, Post Occupancy Analysis, , Historic Structure Reports, Determinations Of Eligibility, National Register Of Historic Places Nominations, Historic Building Preservation Plans, Seismic And Structural Evaluations, Energy Studies For Design Of Energy Upgrades, Roof Evaluations, Fire Safety Review/studies, And Handicapped Accessibility (abaas) Reviews. 5. Comprehensive Project Planning Services For Large New Construction And Major Renovation Projects, Including Surveys Of Existing Conditions And Field Investigations, Site Selection And Evaluation, Planning And Program Studies, Feasibility Studies, Cost Estimates, Inventory Of Existing Furniture, Fixtures, And Equipment, And Other Services. The Budget Assessments May Include Cost Analysis As Well As Cost Estimating. 6. Design Services May Include Green/sustainable Design With A Goal Of Leed Certification And Sites Certification For Select Projects. Other Sustainable Design Requirements May Apply, Such As The Use Of Recycled And Environmentally Responsible Materials, Achievement Of Energy And Water Efficiency Goals, Design For Indoor Environmental Quality, Sustainable Site Design, And Sustainable Urban Design. 7. Other Professional Services Of An Architectural Or Engineering Nature, Or Incidental Services, That Members Of The Ae Professions (and Individuals In Their Employ) May Logically Or Justifiably Perform, Including Studies, Investigations, Surveying And Mapping, Tests, Evaluations, Consultations, Comprehensive Planning, Program/project Management, Conceptual Designs, Plans And Specifications, Value Engineering, Construction Phase Services, Soils Engineering, Drawing Reviews, Architectural Photography, Preparation Of Operating And Maintenance Manuals, And Other Related Services. 8. Environmental Surveys, Reports, Studies, And Designs For The Clean-up, Removal, Monitoring And/or Abatement Of Asbestos, Hazardous/toxic Materials And Petroleum Products. 9. Spatial Data Management (sdm) Program For Creating, Updating And Maintaining Spatial Data And Associated Computer Aided Drawings (cad) To Accurately Reflect The Federal And Leased Inventory. prime Ae Firms Must Have The Ability To Provide Comprehensive Design And Post Construction Contract Services, Which May Include Rfi And Submittal Reviews. prime Ae Firms Must Be Able To Perform Drafting Of Above Work In A Computer System Compatible With The Latest Version Of Autocad And Building Information Modelling Software And Provide Construction Specifications Using The Latest Version Of Masterformat. The Prime Ae Firm Must Also Be Able To Provide Design In Both English And Metric, As Applicable. each Contract Awardee Must Have The Capability To Concurrently Perform Design And Engineering Work For At Least Five (5) Gsa Projects. in Performance Of The Contract, The Selected Prime Ae Firm May Be Required To Include On Its Team The Following Design Disciplines And Specialty Consultants: Architect, Electrical Engineer, Mechanical Engineer, Plumbing, Structural Engineer, Civil Engineer, Cost Estimating, Fire Protection Engineer, Interior Designer, Historic Preservation Architect, Landscape Architect, Vertical Transportation/ Elevator Consultant, Blast Consultant, Materials Conservation, Sustainability, And Hazardous Materials. selection Process the Selection Of Between Three (3) To Six (6) (or More) Single Award Ae Idiq Contracts Per Geographic Zone Will Be Made Using A Two-stage Process As Follows: stage I - The Technical Qualifications And Experience Of Proposed Prime Ae Firms Will Be Evaluated From The Initial Technical Qualification Package, Including Review Of Their Complete Team Of Engineers And Consultants. A Short-list Will Be Established Of The Prime Ae Firms Determined To Be The Most Highly Technically Qualified. The Short-listed Prime Ae Firms Will Be Invited To Continue With Stage Ii Of The Selection Process. stage Ii - Interviews Will Be Conducted With The Short-listed Prime Ae Firms. The Short-listed Prime Ae Firms Will Be Ranked, And The Top-ranked Firms Will Be Selected To Receive The Solicitation And Conduct Negotiations. stage 1 Submission Requirements prime Ae Firms That Fully Meet The Requirements Described In This Notice Are Invited To Submit A Technical Qualification Package To Include The Following, In The Order Listed: cover Letter Referencing The Sam.gov Announcement Number And Briefly Describing The Firm And Its Location, The Geographic Zone They Wish To Be Considered For, Organizational Makeup, Noteworthy Accomplishments, And The Proposed Working And Legal Relationship Between Its Components If The Prime Ae Firm Is A Partnership, Corporation, Association, Joint Venture, Or Other Legal Entity. acknowledgement Of All Amendments Posted Prior To The Closing Date. active Sam Record. executed Agreement(s), If Applicable. standard Form (sf) 330 Architect Engineer Qualifications Part I & Ii responses To The Submission Requirements And Evaluation Criteria Listed Below. prime Ae Firms Shall Submit Separate Complete Technical Qualification Packages For Each Geographic Zone The Firm Is Interested In Being Considered For. only Electronic Submissions In Pdf Format Will Be Accepted; No Hard Copies Will Be Accepted Or Reviewed. pdf Submissions Shall Be Concise And Organized, In 8 1/2" X 11" Format, And The Assembled Content Shall Not Exceed One Hundred And Twenty-five (125) Pages. All Assembled Pages In The Pdf Submissions Shall Be Continuously Numbered, Meaning The Cover Letter, Table Of Contents, Cover Pages, Etc. Are To Be Included In The Continuously Numbered Pages; There Are No Exclusions Allowed In The Specified Page Limitation. ensure The Submission Clearly Identifies The Information Being Submitted For Each Evaluation Factor, Either By Using Cover Pages For Each Evaluation Factor Content Or By Annotating At The Top Of Each Page Which Evaluation Factor(s) The Information Applies To. sf 330 Instructions: prime Ae Firms Are To Complete And Submit A Current Sf 330 Part I & Ii. All Sections Of The Sf330 Must Be Filled Out In Their Entirety And Must Address All Elements Identified Under The Stage 1 Evaluation Criteria. interested Firms With More Than One (1) Office Must Indicate On Their Sf 330 The Staffing Composition Of The Office In Which The Work Will Be Performed Under The Specified Geographic Zone. Include A Completed Part Ii Only For Each Proposed Consultant/ Subcontractor Listed In Part I - Section C. in Addition To The Standard Instructions Provided On The Sf 330, The Following Are Supplemental Instructions For Sf 330 Part I Sections Under This Announcement: section C: The Prime Ae Firm Should Prioritize Team Members And Only Provide Those That Are Essential To Creating The Most Well-rounded Team. section E: The Prime Ae Firm Should Prioritize And Provide Those That Best Represent The Firm's Ability To Accomplish The Requirements Of This Contract. Ceos And Other Executive Personnel Should Not Be Submitted Unless They Will Have Direct Responsibility For Accomplishing The Task Orders Under This Contract. It Is Required That The Lead Architectural Designer And The Primary Point Of Contact That Would Be Responsible For Managing This Contract And Assigning Task Orders Be Included. It Is Recommended That The Key Personnel Directly Responsible For Work Submitted In Section F Should Also Be Included. section F: All Projects Provided Should Be Designed And Completed Within The Last Ten (10) Years; "designed And Completed" Means The Design Work And Associated Construction Work For A Submitted Project Are Both To Have Been Completed In The Last Ten (10) Years. The Prime Ae Firm May Submit The Same Projects For Multiple Evaluation Factors If They Address The Specified Information Required For Each. Ensure Each Project Specifically Notes Which Factor It Is Being Submitted For. Ensure That An Accessible Owner Point Of Contact Including Name, Title, Address, Current Email Address And Current Phone Number Is Provided. section G: Indicate Key Personnel And Consultant/ Subcontractors Who Participated In The Example Projects Under Section F. section H: Certification Is Required By The Prime Ae Firm That They Have An Active Main Office And/or Branch Office Located Within The Applicable Geographic Area They Wish To Be Considered; The Last Entry Under This Section Must Read "i Hereby Certify That The Prime Ae Firm Listed In Section C Meet(s) The Geographic Limitations Stated In The Synopsis For This Contract". stage 1 Evaluation Criteria the Evaluation Criteria And Associated Relative "weight" For Each Criteria Element Is As Follows: 1. Specialized Experience (35%) 2. Professional Qualifications And Experience Of Key Personnel (25%) 3. Past Performance (20%) 4. Project Management And Quality Control Plan (10%) 5. Geographic Location (5%) 6. Small Business Socio-economic Categories (5%) the Evaluation Criteria And Submission Requirements For Each Are Further Described Below: 1. Evaluation Factor No. 1: Specialized Experience (35%) this Factor Considers The Prime Ae Firm’s Specialized Experience For Projects That Meet The Submittal Requirements Project Definition For This Factor. The Prime Ae Firm Shall Provide Their Most Relevant Experience In Response To Gsa’s “requirements Under The Contract” Description And Demonstrate Success In Appropriately Addressing Complex Design, Research, Innovation, And Strategy Issues Such As Unique Requirements, Significance Of Community Or Cultural Context On Building Or Interior Design, Image, Function, Scale, Scope, Complexity, And Experience Or Perception Of Users. The Prime Ae Firm Shall Demonstrate Innovation In Design, Research, Construction And Project Management Approaches Using Integrated Multidisciplinary Teams On A Range Of Projects Including But Not Limited To Innovative Building Design Solutions, Strategic Endeavors, And Efforts To Achieve Sustainable Solutions. The Prime Ae Firm Shall Also Demonstrate Experience Providing Services Ranging From Pre-design Studies Through Construction Administration; Highlight Areas Of Concentration Or Competence And Range Of Expertise In Diverse Areas Such As Workplace Strategy, Change Management And/or Historic Preservation; Highlight Achievements In Resolution Of Technical Issues Such As Abaas Improvements, Security Design And Energy Projects. the Standard For This Factor Is Met When: the Prime Ae Firm Demonstrates Success In Addressing Complex Design And/or Challenges Through Evidence Of Experience Addressing The Elements Above. additional Consideration Under This Factor: more Weight May Be Given For Firms Who Submit Projects Reflecting Any Of The Following- (1) Experience With Projects Owned By Public Agencies, Including But Not Limited To Federal, State, And Municipal Agencies. (2) Awards Or Other Forms Of Public Recognition From Nationally Recognized Organizations Demonstrating Excellence In Design. submittal Requirements For Factor 1: the Prime Ae Firm Must Submit Three (3) Projects Total For This Factor, No More And No Less. For Each Project, Submit A Maximum Three (3) Page Narrative, Including Any Photographs And Drawings, That Illustrate Specialized Experience Of Projects Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More. Projects Submitted May Be For Both Renovations And New Construction. 2. Evaluation Factor No. 2: Professional Qualifications And Experience Of Key Personnel (25%) this Factor Considers The Prime Ae Firm’s Professional Qualifications, Experience Of Key Personnel, And Design Philosophy. The Prime Ae Firm Shall Demonstrate Professional Qualifications And Experience Of The Proposed Key Personnel Assigned To This Project Necessary For Satisfactory Performance Of The Required Services. Qualifications And Experience Of The Prime Ae Firm’s Key Personnel Will Be Reviewed First; Then The Overall Proposed Team Qualifications And Experience Will Be Reviewed To Ensure They Will Provide Necessary Support To The Prime Ae Firm To Perform The Required Services. The Prime Ae Firm Shall Also Address The Principal Or Lead Designer’s Philosophy To Include Past Work That Exhibits A Balance Of Design Quality With Other Factors That Affect Public Architecture Including Security, Review Processes, And Budget And Schedule. the Standard For This Factor Is Met When: the Prime Ae Firm Submits All Required Information Demonstrating The Qualifications, Experience, And Design Philosophy As Described. additional Consideration Under This Factor: more Weight May Be Given For Firms Who Submit Information Addressing Any Of The Following - (1) The Degree To Which Any Of The Key Personnel’s Qualifications Are Superior (2) History Of Leadership In Volunteer Organizations Related To The Field Of Architecture, Engineering, And Construction. (3) Awards Or Other Forms Of Public Recognition From Nationally Recognized Organizations Demonstrating Excellence In Design. (4) A Design Philosophy That Provides Evidence Of Flexibility, Innovation, Balance, And Awareness Of Design Excellence In Public Architecture. submittal Requirements For Factor 2: the Prime Ae Firm Shall Provide A Narrative Description, Not To Exceed Two (2) Pages, Summarizing The Principal Or Lead Designer’s Philosophy And Approach To Project Solutions And Providing Examples. Information Provided May Include Appropriate Graphic Material. the Prime Ae Firm Must Submit Resumes Of Proposed Team Members, Not To Exceed Two (2) Pages Each, For Personnel In The Following Disciplines: (1) Prime Architect (one Individual Can Fulfill More Than One Role) principal (architect Of Record) lead Designer project Manager (individual Responsible For Task Orders) (2) Consultants Of Record civil Engineer structural Engineer mechanical Engineer electrical Engineer plumbing Engineer fire Protection Engineer historic Preservation Architect interior Designer landscape Architect resumes Must Indicate Professional Qualification Of Team Members, Including Education, Professional Certification And Licensure, Relevant Experience, Any Specialized Expertise, And The Length Of Service With The Firm. Include And Clearly Identify Resumes For Individuals Who Will Serve As Principal/architect Of Record, Lead Designer, And Project Manager(s), As Well As The Lead Designers In Each Discipline (whether They Are A Part Of The Prime Ae Firm Or A Sub-consultant). resumes Submitted Must Demonstrate Familiarity With New Construction And/or Renovation Projects In Occupied Buildings Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More. 3. Evaluation Factor No. 3: Past Performance (20%) this Factor Considers The Prime Ae Firm Past Performance On A Range Of Projects Of Varying Scopes, Scales, And Complexities. The Prime Ae Firm’s Role On Each Project Submitted Must Be Identified, Including Demonstrated Success At Collaborative Relationships With Consultants If Applicable. in Evaluating Past Performance For Projects That Meet The Submittal Requirements Project Definition For This Factor, The Government May Review The Contractor Performance Assessment Reporting System (cpars) Database And/or Past Performance Questionnaires (ppq) Submitted By The Prime Ae Firm. Points Of Contact Provided For Projects Submitted Under This Factor And Other Factors May Be Contacted, And The Government May Also Review Any Other Source Of Past Performance Information At Its Discretion. Evaluation Of Past Performance Is A Subjective Assessment Based On Consideration Of All Relevant Facts And Circumstances. It Will Not Be Based On Absolute Standards Of Acceptable Performance. In The Case Of An Offeror Without A Record Of Past Performance, Or For Whom Information On Past Performance Is Not Available, That Offeror Will Be Given Neither A Favorable Nor An Unfavorable Evaluation Regarding Past Performance. the Standard For This Factor Is Met When: the Prime Ae Firm’s Overall Past Performance Record Demonstrates Satisfactory Performance On Three (3) Projects That Meet The Submittal Requirements Project Definition For This Factor. submittal Requirements For Factor 3: the Prime Ae Firm Must Submit Three (3) Projects Total For This Factor, No More And No Less. For Each Project, Submit A Maximum Three (3) Page Narrative, Including Any Photographs And Drawings, Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More. Include Tangible Evidence Such As Certificates, Awards, Peer Recognition, Etc., Demonstrating Design Performance. Projects Submitted May Be For Both Renovations And New Construction. Each Project Specified Is To Clearly Identify The Project Name, Design Contract Number (if Applicable), Location Of Work, Design Contract Value, Construction Value, And Accurate Client Reference Information Including Name, Title, Address, Email, And Phone Number. Points Of Contact Provided For Projects Submitted Under Other Evaluation Criteria May Be Contacted. additionally, The Prime Ae Firm Must Submit A Ppq Or Copy Of The Completed Cpars Evaluation For Each Of The Three (3) Projects Submitted Under This Factor. The Ppq Or Cpars Evaluation Pages Are In Addition To The Three (3) Page Maximum Narrative Specified For Each Project. 4. Evaluation Factor 4: Project Management And Quality Control Plan (10%) this Factor Evaluates The Prime Ae Firm’s Project Management And Quality Control Plan, Which Provides A Plan Specific To This Idiq Contract. At A Minimum, The Submitted Plan Must Clearly Identify Key Roles And Lines Of Communication, And Must Explain Steps To Ensure Cost And Schedule Control, Quality Control, Project Team Capacity, And Requirements For All Review Stages And Submittals. the Project Management And Quality Control Plan Must Also Demonstrate The Capacity Of The Prime Ae Firm To Accomplish Multiple, Large And Small Projects Simultaneously, And The Ability To Sustain The Loss Of Key Personnel While Accomplishing The Work Within The Required Time Limits. Under The Anticipated Idiq Contract, Each Contract Awardee Must Have The Capability To Concurrently Perform Design And Engineering Work For At Least Five (5) Gsa Projects/ Task Orders. the Standard For This Factor Is Met When: the Prime Ae Firm Demonstrates The Following - the Methods To Deliver Quality Design Or Deliverable While Maintaining Cost And Schedule Controls. the Capability To Respond To The Government’s Needs In A Timely Manner. the Capability To Perform And Balance Multiple Task Orders Concurrently And To Balance Competing Needs Of Multiple Customers. their Ability, Methods, And Processes To Adequately Staff Project Teams. submittal Requirements For Factor 4: the Prime Ae Firm Shall Submit A Project Management And Quality Control Plan, Six (6) Pages Maximum, That Demonstrates The Firm’s Approach For Delivering Individual Projects And Addresses How The Plan Will Be Catered To The Anticipated Idiq Contract, As Described Above. 5. Evaluation Factor 5: Geographic Location (5%) this Factor Evaluates The Prime Ae Firm’s Knowledge Of Local Conditions Within The Geographical Zone(s) In Which They Wish To Be Considered For Contract Award Including Design And Project Strategies Used For Solutions To Design Issues Specific To Local, Environmental, And Geographic Areas Within A Zone. This Must Include Project Delivery Processes, Construction Methodologies, And Related Involvement Or To The Consultants. This Factor Also Considers The Prime Ae Firm’s Familiarity Of The Applicable Geographic Area’s Architectural Standards And Codes, Building Codes, Environmental Regulations, Soil Conditions, Seismic Requirements, And Agency Regulations. the Standard For This Factor Is Met When: the Prime Ae Firm Clearly Demonstrates Knowledge Of Local Conditions And Familiarity With Applicable Geographic Areas Standards And Codes, As Described Above. submittal Requirements For Factor 5: the Prime Ae Firm Must Submit Three (3) Projects Total For This Factor, No More And No Less, And Must Provide A Maximum Of Three (3) Page Narrative For Each Project, Including Any Photographs And Drawings As Applicable, For A Total Of Three (3) Projects Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More, Describing The Prime Ae Firm’s Knowledge Of Locality Criteria Described Above. Projects Submitted May Be For Both Renovations And New Construction. 6. Evaluation Factor No. 6: Small Business Socio Economic Categories: Hubzone, Sdvosb, Wosb (5%) this Factor Considers The Prime Ae Firms Status As A Small Business Concern In The Following Socio-economic Categories: Historically Underutilized Business Zone (hubzone) Small Business Concern; Service-disabled Veteran Owned Small Business (sdvosb) Concern; Women-owned Small Business (wosb) Concern. including This Factor In The Evaluation Of The Prime Ae Firm Will Result In A Higher Evaluation Rating Being Given To Firms Who Fall Within One Of The Specified Socio-economic Categories. the Standard For This Factor Is Met When: the Prime Ae Firm Provides Confirmation Of Their Small Business Socio-economic Status Within One Or More Of The Specified Categories, If Applicable. submittal Requirements For Factor 6: the Prime Ae Firm Must Submit Proof Of Current Sba Certification Within The Socio-economic Category Specified. stage Ii Process Summary the Names Of The Short-listed Prime Ae Firms Who Will Be Invited To Participate In Stage Ii Of The Selection Process Will Be Published On Sam.gov. This Publication Will Be The Only Notice For Prime Ae Firms Who Submit Stage I Technical Qualification Packages And Are Not Short-listed Will Receive. Short-listed Prime Ae Firms Will Be Provided More Detailed Information On The Stage Ii Process. prime Ae Firms Slated For Interviews Will Be Asked To Present Information On The Evaluation Factors. The Primary Presenter Must Be The Proposed Project Manager/ Lead Project Architect, With Assistance From Up To Two (2) Additional Team Members As Necessary. Interviews Will Be Conducted Via Google Meet. following The Technical Review And Interview Process The Final Selected Prime Ae Firms Will Be Requested To Provide Pricing To Include Overhead Rates, Profit Rates And Hourly Rates For The Anticipated Disciplines For Use In Negotiating Fixed Price Task Orders. notice To Prime Ae Firms prime Ae Firms Submitting Qualification Packages Under This Notice Must Be A Small Business Firm With A Main Office And/or Branch Office In Each Of The Geographic Zone(s) They Are Interested In Being Considered For. Additionally, Failure To Address Each Of The Evaluation Factors And Provide The Requested Information May Result In Failure To Qualify. it Is The Prime Ae Firms Responsibility To Monitor Sam.gov For Any Changes To This Announcement. questions: the Deadline For Submitting Questions Is October 4, 2024, 4:00 Pm Pt. Questions Must Be Submitted In Writing Via Email To Heather Caney, Contracting Officer At Heather.caney@gsa.gov. Questions Received After The Date Specified Will Not Be Accepted Or Responded To. An Amendment Will Be Issued To Provide Responses To All Questions Received By The Deadline. all Questions Received In Writing By The Closing Date And Time Have Been Responded To Under Amendment 1. No Additional Questions Will Be Accepted Or Responded To. closing Date And Time: prime Ae Firms Which Possess The Qualifications To Perform The Services Described In This Notice Are Invited To Submit Their Complete Technical Qualification Package No Later Than November 12, 2024, 4pm Pt. The Email Submission Must Clearly Identify The Synopsis/solicitation Number And The Applicable Geographic Zone For Which The Prime Ae Firm Is To Be Considered. For Prime Ae Firms Submitting For Multiple Zones, Send A Separate Email For Each Zone. all Submissions Shall Be Sent Via Email To Heather Caney, Contracting Officer At Heather.caney@gsa.gov. only Electronic Pdf Submissions Will Be Considered. No Late Submissions Will Be Accepted. it Is The Prime Ae Firm’s Responsibility To Ensure Technical Qualification Packages Are Complete And Submitted Early Enough To Be Received By The Contracting Officer Before The Deadline, And To Confirm Receipt Before The Deadline. Technical Qualification Packages Which Are Received By The Contracting Officer Later Than The Time Noted Will Be Rejected And Will Not Be Considered. the Maximum File Size For Email Submissions Is 25 Mb. Gsa Has Occasionally Experienced Delays In Delivery Of Emails From The Gsa Server To An Email Account. Therefore, Prime Ae Firms Need To Plan Accordingly. list Of Attachments: the Following Are A List Of Attachments Provided With This Notice: 1. Ppq (word) 2. Sf330 Part 1 & 2 With Form Instructions (pdf) 3. Sf330 - Part 1 (pdf) 4. Sf330 - Part 2 (pdf) 5. Sf330 - Extra Section C (pdf) 6. Sf330 - Extra Section E (pdf) 7. Sf330 - Extra Section G (pdf) 8. Sf330 - Extra Section H (pdf) 9. Amendment 1 - 10/18/2024 (pdf)

Details: The contracting entity sets up a dynamic purchasing system that will be entered in to acquire the transport services required by the subscriber.” Transporters are not automatically involved in the procurement system, but they must apply for it separately and agree to the requirements and the terms. The purpose of the Transportation Service is to primarily fill the dynamic purchasing system. “All traffic controllers who wish to handle Personal and Short-Traffic Transports, as well as Transports mentioned in the Later Stage Other Description of Services, must be registered in this Purchase System during its Termination. The first application for a dynamic purchasing system ended on 31 July 2020 at 16:00. On the basis of the incoming Offers, the Board of Directors will make the first Applicant Decision during August 2020.” “Dynamic Procurement System may submit Applications for the entire Duration of the Library on the Offer Service.fi website. The duration of the dynamic purchasing system is 60 K. "Subscriber Accepted to the dynamic purchasing system All applicants submitting applications who comply with the Applicant'stuability requirements. Applicability requirements Described in the Espd form, Section of the transfer plus Other Terms and Prices and Terms in the Appendix and Service Description Annex.

Details: Description Department Of Social Welfare And Development Field Office Xii Regional Center, Brgy. Carpenter Hills, Koronadal City, 9506 Philippine Bidding Documents For The Procurement Of Office Supplies For Slp Staff For 2024 (lot 1 To Lot 6) Project Identification No. Dswd12-slp-2024-10-023 Government Of The Republic Of The Philippines Sixth Edition July 2020 Preface These Philippine Bidding Documents (pbds) For The Procurement Of Goods Through Competitive Bidding Have Been Prepared By The Government Of The Philippines For Use By Any Branch, Constitutional Commission Or Office, Agency, Department, Bureau, Office, Or Instrumentality Of The Government Of The Philippines, National Government Agencies, Including Government-owned And/or Controlled Corporations, Government Financing Institutions, State Universities And Colleges, And Local Government Unit. The Procedures And Practices Presented In This Document Have Been Developed Through Broad Experience, And Are For Mandatory Use In Projects That Are Financed In Whole Or In Part By The Government Of The Philippines Or Any Foreign Government/foreign Or International Financing Institution In Accordance With The Provisions Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. The Bidding Documents Shall Clearly And Adequately Define, Among Others: (i) The Objectives, Scope, And Expected Outputs And/or Results Of The Proposed Contract Or Framework Agreement, As The Case May Be; (ii) The Eligibility Requirements Of Bidders; (iii) The Expected Contract Or Framework Agreement Duration, The Estimated Quantity In The Case Of Procurement Of Goods, Delivery Schedule And/or Time Frame; And (iv) The Obligations, Duties, And/or Functions Of The Winning Bidder. Care Should Be Taken To Check The Relevance Of The Provisions Of The Pbds Against The Requirements Of The Specific Goods To Be Procured. If Duplication Of A Subject Is Inevitable In Other Sections Of The Document Prepared By The Procuring Entity, Care Must Be Exercised To Avoid Contradictions Between Clauses Dealing With The Same Matter. Moreover, Each Section Is Prepared With Notes Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Shall Not Be Included In The Final Documents. The Following General Directions Should Be Observed When Using The Documents: A. All The Documents Listed In The Table Of Contents Are Normally Required For The Procurement Of Goods. However, They Should Be Adapted As Necessary To The Circumstances Of The Particular Procurement Project. B. Specific Details, Such As The “name Of The Procuring Entity” And “address For Bid Submission,” Should Be Furnished In The Instructions To Bidders, Bid Data Sheet, And Special Conditions Of Contract. The Final Documents Should Contain Neither Blank Spaces Nor Options. C. This Preface And The Footnotes Or Notes In Italics Included In The Invitation To Bid, Bid Data Sheet, General Conditions Of Contract, Special Conditions Of Contract, Schedule Of Requirements, And Specifications Are Not Part Of The Text Of The Final Document, Although They Contain Instructions That The Procuring Entity Should Strictly Follow. D. The Cover Should Be Modified As Required To Identify The Bidding Documents As To The Procurement Project, Project Identification Number, And Procuring Entity, In Addition To The Date Of Issue. E. Modifications For Specific Procurement Project Details Should Be Provided In The Special Conditions Of Contract As Amendments To The Conditions Of Contract. For Easy Completion, Whenever Reference Has To Be Made To Specific Clauses In The Bid Data Sheet Or Special Conditions Of Contract, These Terms Shall Be Printed In Bold Typeface On Sections I (instructions To Bidders) And Iii (general Conditions Of Contract), Respectively. F. For Guidelines On The Use Of Bidding Forms And The Procurement Of Foreign-assisted Projects, These Will Be Covered By A Separate Issuance Of The Government Procurement Policy Board. Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….4 Section I. Invitation To Bid……………………………………………………..7 Section Ii. Instructions To Bidders…………………………………………...11 1. 12 2. 12 3. 12 4. 12 5. 12 6. 13 7. 13 8. 13 9. 14 10. 14 11. 14 12. 14 13. 15 14. 15 15. 16 16. 16 17. 16 18. 16 19. 16 20. 17 21. 17 Section Iii. Bid Data Sheet …………………………………………………..18 Section Iv. General Conditions Of Contract ……………………...………..23 1. 24 2. 24 3. 24 4. 24 5. 25 6. 25 Section V. Special Conditions Of Contract ………………………………….26 Section Vi. Schedule Of Requirements ……………………………………....29 Section Vii. Technical Specifications …………………………………………45 Section Viii. Checklist Of Technical And Financial Documents …………..62 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Notes On The Invitation To Bid The Invitation To Bid (ib) Provides Information That Enables Potential Bidders To Decide Whether To Participate In The Procurement At Hand. The Ib Shall Be Posted In Accordance With Section 21.2 Of The 2016 Revised Irr Of Ra No. 9184. Apart From The Essential Items Listed In The Bidding Documents, The Ib Should Also Indicate The Following: A. The Date Of Availability Of The Bidding Documents, Which Shall Be From The Time The Ib Is First Advertised/posted Until The Deadline For The Submission And Receipt Of Bids; B. The Place Where The Bidding Documents May Be Acquired Or The Website Where It May Be Downloaded; C. The Deadline For The Submission And Receipt Of Bids; And D. Any Important Bid Evaluation Criteria (e.g., The Application Of A Margin Of Preference In Bid Evaluation). The Ib Should Be Incorporated In The Bidding Documents. The Information Contained In The Ib Must Conform To The Bidding Documents And In Particular To The Relevant Information In The Bid Data Sheet. Invitation To Bid For The Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Staff For 2024 (lot 1 To Lot 6) 1. The Department Of Social Welfare And Development Field Office Xii, Through The General Appropriations Act 2024 Intends To Apply The Sum Of The Amount Being The Abc To Payments Under The Contract For Each Following Lot/item: A. Five Hundred Thirty Four Thousand Three Hundred Nineteen Pesos Only (₱534,319.00) For Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of South Cotabato Cluster For 2024 (lot1); B. One Hundred Thirty One Thousand Two Hundred Twenty Three Pesos Only (₱131,223.00) For Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Rpmo For 2024 (lot2); C. Three Hundred Thousand Three Hundred Six Pesos Only (₱300,306.00) For Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Sultan Kudarat For 2024 (lot3); D. Four Hundred Sixty Four Thousand Six Hundred Seventy Two Pesos Only (₱464,672.00) For Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Sultan Kudarat For 2024 (lot4); And E. One Hundred Forty Nine Thousand Thirty Three Pesos Only (₱149,033.00) For Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Cc-i For 2024 (lot5) F. Two Hundred Twelve Thousand Ninety Six Pesos Only (₱212,096.00) For Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Cc-ii For 2024 (lot6) 2. The Department Of Social Welfare And Development Field Office Xii Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Po. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Social Welfare And Development Field Office Xii – Bids And Awards Committee Secretariat Office And Inspect The Bidding Documents At The Address Given Below During 8:00a.m. To 5:00 P.m.. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 15, 2024 To October 31, 2024, 5:00 P.m. From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Approved Budget For The Contract Bid Docs Amount Lot 1 – ₱ 534,319.00 ₱1,000.00 Lot 2 – ₱ 131,223.00 ₱1,000.00 Lot 3 – ₱ 300,306.00 ₱1,000.00 Lot 4 – ₱ 464,672.00 ₱1,000.00 Lot 5 – ₱ 149,033.00 ₱1,000.00 Lot 6 – ₱ 212,096.00 ₱1,000.00 Total – ₱ 1,791,649.00 Php 5,000.00 (maximum Fee For Sale Of Bidding Documents) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. [note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots.] 6. The Department Of Social Welfare And Development Field Office Xii Will Hold A Pre-bid Conference On October 23, 2024, 10:30 A.m. At Dswd Field Office 12, Regional Center, Brgy. Carpenter Hill, Koronadal City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below On Or Before November 04, 2024, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening And Evaluation Shall Be On November 04, 2024, 10:30 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Social Welfare And Development Field Office Xii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dswd 12 – Bac Secretariat Head Administrative Division – Procurement Section Dswd Field Office 12, Regional Center, Brgy. Carpenter Hills, Koronadal City, 9506 Procurement.fo12@dswd.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://fo12.dswd.gov.ph/bid-bulletin/ Https://www.philgeps.gov.ph October 14, 2024 Jackiya A. Lao Bac Chairperson Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Department Of Social Welfare And Development Field Office Xii Wishes To Receive Bids For The Procurement Of Office Supplies For Slp Staff For 2024 (lot 1 To Lot 6), With Identification Number Dswd12-slp-2024-10-023. The Procurement Project (referred To Herein As “project”) Is Composed Of One Lot Or Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 Approved Gaa In The Amount Of One Million Seven Hundred Ninety One Thousand Six Hundred Forty Nine Pesos Only (₱1,791,649.00) 2.2. The Source Of Funding The Approved Gaa 2024. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On October 23, 2024, 10:30 A.m. And At Its Physical Address Department Of Social Welfare And Development Field Office 12, Regional Center, Brgy. Carpenter Hills, Koronadal City As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, On/or Before October 26, 2024 Or At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In The Bds. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In The Bds. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until March 04, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Notes On The Bid Data Sheet The Bid Data Sheet (bds) Consists Of Provisions That Supplement, Amend, Or Specify In Detail, Information, Or Requirements Included In The Itb Found In Section Ii, Which Are Specific To Each Procurement. This Section Is Intended To Assist The Procuring Entity In Providing The Specific Information In Relation To Corresponding Clauses In The Itb And Has To Be Prepared For Each Specific Procurement. The Procuring Entity Should Specify In The Bds Information And Requirements Specific To The Circumstances Of The Procuring Entity, The Processing Of The Procurement, And The Bid Evaluation Criteria That Will Apply To The Bids. In Preparing The Bds, The Following Aspects Should Be Checked: A. Information That Specifies And Complements Provisions Of The Itb Must Be Incorporated. B. Amendments And/or Supplements, If Any, To Provisions Of The Itb As Necessitated By The Circumstances Of The Specific Procurement, Must Also Be Incorporated. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply And Delivery Of Office Equipment, Supplies, And Consumables. B. Completed Within At Least Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 The Price Of The Goods Shall Be Quoted Ddp Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than ₱ 10,686.38 For Lot 1 ₱ 2,624.46 For Lot 2, ₱ 6,006.12 For Lot 3, ₱ 9,293.44 For Lot 4, ₱ 2,980.66 For Lot 5, And ₱ 4,241.92 For Lot 6 Or The Amount Equivalent To Two Percent (2%) Of Abc If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than ₱ 26,715.95 For Lot 1, ₱ 6,561.15 For Lot 2, ₱ 15,015.30 For Lot 3, ₱ 23,233.60 For Lot 4, ₱ 7,451.65 For Lot 5, And ₱ 10,604.80 For Lot 6 Or The Amount Equivalent To Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 19.1 1. All Forms Must Be Submitted Using The Prescribed Format Provided By The Procuring Entity And Completed Without Any Alterations To Their Format, And No Substitute Form Shall Be Accepted. All Blank Spaces Shall Be Filled In With The Information Requested. 2. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder, Otherwise, Bids Shall Be Subject To An Outright Disqualification. 20.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Supplier Of The Notice Of Post Qualification From The Bac That The Supplier Has The Lowest Calculated Bid (lcb) Or Single Calculated Bid (scb), The Supplier Shall Submit And/or Present The Following Requirements For Post Qualification In Accordance To Section 34 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra9184: 1. Present Original Copy Of The Following: A. A. Latest Income Tax Return And Business Tax Return ( For 2nd Quarter Of 2024) B. B. Latest Value Added Tax (vat) Return ( For 2nd Quarter Of 2024, If Applicable) Only Tax Returns Filed And Taxes Paid Through The Bir Electronic Filing & Payment System (efps) Shall Be Accepted. C. Valid Philgeps Registration Certificate (platinum Membership) (all Pages) D. Valid Registration Certificate From Securities And Exchange Commission (sec) For Corporations, Or From Department Of Trade And Industry (dti) For Sole Proprietorship, Or From Cooperative Development Authority (cda) For Cooperatives; E. Valid Business/mayor’s Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Bidder Is Located; F. Valid Tax Clearance Per Eo 398, Series Of 2005, As Finally Reviewed And Approved By The Bir; G. Bureau Of Internal Revenue (bir) Registration Certificate. H. Copy Of Contracts Or Po’s, Notice Of Award (noa) And Notice To Proceed (ntp) For All On-going Contracts I. End-user’s Acceptance, Official Receipt (duplicate Or Triplicate Copy) Or Sales Invoice With Collection Receipt/s (duplicate Or Triplicate Copy) Relative To Single Largest Completed Contract J. Company Profile And Organizational Chart. Company Printed Brochure May Be Included. K. Vicinity Map/location Of The Business. L. Other Appropriate Licenses And Permits Required By Law And Stated In The Bidding Documents. Failure To Submit Any Of The Post-qualification Requirements On Time, Or A Finding Against The Veracity Thereof, Shall Disqualify The Bidder For Award. Provided In The Event That A Finding Against The Veracity Of Any Of The Documents Submitted Is Made, It Shall Cause The Forfeiture Of The Bid Security In Accordance With Section 69 Of The Irr Of Ra 9184. Note: For Post Qualification Purposes Only 20.3 Each Bidder Shall Submit The Following In One (1) “mother” Envelope Duly Sealed And Labeled, Containing Two (2) Sets Of Envelopes: First Envelope Containing At Least One (1) Set Of Duly Signed And Sealed Eligibility And Technical Documents Second Envelope Containing At Least One (1) Set Of Duly Signed And Sealed Financial Bid Documents 20.4 All Envelopes Shall Be Labeled/marked As Follows: To : Jackiya A. Lao Chairperson Bids And Awards Committee Dswd-field Office 12 From :_______________________________ (name Of Bidder In Capital Letters) Address: _______________________________ (address Of Bidder In Capital Letters) Project: Procurement Of Office Supplies For Slp Provincial Staff Of South Cotabato Cluster For 2024 (lot1) Procurement Of Office Supplies For Slp Provincial Staff Of Rpmo For 2024 (lot2) Procurement Of Office Supplies For Slp Provincial Staff Of Sultan Kudarat For 2024 (lot3) Procurement Of Office Supplies For Slp Provincial Staff Of Sargen For 2024 (lot4) Procurement Of Office Supplies For Slp Provincial Staff Of Cc-i For 2024 (lot5) Procurement Of Office Supplies For Slp Provincial Staff Of Cc-ii For 2024 (lot6) Bid Ref No.: Itb No. Dswd12-slp-2024-10-023 (lot1) Dswd12-slp-2024-10-023 (lot2) Dswd12-slp-2024-10-023 (lot3) Dswd12-slp-2024-10-023 (lot 4) Dswd12-slp-2024-10-023 (lot 5 Dswd12-slp-2024-10-023 (lot 6) Approved Budget For The Contract : Lot 1 ₱534,319.00 Lot 2 ₱131,223.00 Lot 3 ₱300,306.00 Lot 4 ₱464,672.00 Lot 5 ₱149,033.00 Lot 6 ₱212,096.00 Do Not Open Before: 04 November 2024; 10:30 A.m. 21.2 No Further Instructions Section Iv. General Conditions Of Contract Notes On The General Conditions Of Contract The General Conditions Of Contract (gcc) In This Section, Read In Conjunction With The Special Conditions Of Contract In Section V And Other Documents Listed Therein, Should Be A Complete Document Expressing All The Rights And Obligations Of The Parties. Matters Governing Performance Of The Supplier, Payments Under The Contract, Or Matters Affecting The Risks, Rights, And Obligations Of The Parties Under The Contract Are Included In The Gcc And Special Conditions Of Contract. Any Complementary Information, Which May Be Needed, Shall Be Introduced Only Through The Special Conditions Of Contract. 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Vii (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Notes On The Special Conditions Of Contract Similar To The Bds, The Clauses In This Section Are Intended To Assist The Procuring Entity In Providing Contract-specific Information In Relation To Corresponding Clauses In The Gcc Found In Section Iv. The Special Conditions Of Contract (scc) Complement The Gcc, Specifying Contractual Requirements Linked To The Special Circumstances Of The Procuring Entity, The Procuring Entity’s Country, The Sector, And The Goods Purchased. In Preparing This Section, The Following Aspects Should Be Checked: A. Information That Complements Provisions Of The Gcc Must Be Incorporated. B. Amendments And/or Supplements To Provisions Of The Gcc As Necessitated By The Circumstances Of The Specific Purchase, Must Also Be Incorporated. However, No Special Condition Which Defeats Or Negates The General Intent And Purpose Of The Provisions Of The Gcc Should Be Incorporated Herein. Special Conditions Of Contract Gcc Clause Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: The Delivery Shall Be One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Purchase Order Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – Not Applicable Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. Transportation – Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 The Terms Of Payment Shall Be As Follows: Payment Must Correspond To The Value Of Goods Delivered And Accepted After The Appropriate Inspection Acceptance Procedures Proof Of Deliveries) Must Be Signed By Authorized Person To Support Claims For Payment. 4 The Inspections And Tests Shall Be Conducted By The Dswd Inspection Committee, Final Acceptance By The Dswd Acceptance Committee, And End-user. Section Vi. Schedule Of Requirements A. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of South Cotabato Cluster For 2024 (lot1) The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Book Paper, A4 70gsm 315 Box/es 315 Box/es Delivery Of The Goods Is Required One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Po 2 Correction Tape 5mm X 8m 62 Piece/s 62 Piece/s 3 Fastener, 70mm Plastic 10 Box/es 10 Box/es 4 Epson Ink 003, Black 20 Piece/s 20 Piece/s 5 Epson Ink 664, Black 20 Piece/s 20 Piece/s 6 Staple Wire #35 32 Piece/s 32 Piece/s 7 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 35 Pad/s 35 Pad/s 8 Ballpen. 0.5 Black 165 Piece/s 165 Piece/s 9 Ballpen. 0.5 Blue 164 Piece/s 164 Piece/s 10 Sign Pen, 0.5 Black 7 Piece/s 7 Piece/s 11 Gel Ink Pen, 0.7 Black 96 Piece/s 96 Piece/s 12 Gel Ink Pen, 0.7 Blue 96 Piece/s 96 Piece/s 13 Stapler With Remover #35 32 Piece/s 32 Piece/s 14 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi & Wi-fi Direct Seamless Setup Borderless Printing Up To 4r Printer Functions: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Maximum Resolution: 5760 X 1440 Dpi 2 Unit /s 2 Unit /s Note: Delivery Term: Note: One Time Delivery To The Provincial Cluster Office (po) Located At Koronadal City And Inspection Should Also Be Done In Pco-koronadal City. Delivery Terms Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco South Cotabato, South Cotabato Gymnasium, Koronadal City General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ B. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Rpmo For 2024 (lot2) The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Pentel Pen, Black 10 Piece/s 10 Piece/s Delivery Of The Goods Is Required One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Po 2 Epson 003, Black 20 Piece/s 20 Piece/s 3 Epson 003, Cyan 10 Piece/s 10 Piece/s 4 Epson 003, Magenta 10 Piece/s 10 Piece/s 5 Epson 003, Yellow 10 Piece/s 10 Piece/s 6 Vellum, Board A4 200gsm, 10 Sheets Per Pack 100 Pack/s 100 Pack/s 7 Binder Clip, Small 20 Piece/s 20 Piece/s 8 Binder Clip, Medium 20 Piece/s 20 Piece/s 9 Binder Clip, Large 10 Piece/s 10 Piece/s 10 Notepad 2"x3 10 Pad/s 10 Pad/s 11 Notepad 3"x4 10 Pad/s 10 Pad/s 12 Paper Clip Vinyl Jumbo 55mm 10 Box/es 10 Box/es 13 Paper Clip Vinyl Small 33mm 10 Box/es 10 Box/es 14 Pencil Eberhard Faber's Wood Clinched Bonding Technology No. 2 10 Piece/s 10 Piece/s 15 Gel Ink Pen, 0.7 Black 10 Piece/s 10 Piece/s 16 Gel Ink Pen, 0.7 Blue 10 Piece/s 10 Piece/s 17 Stapler With Remover #35, Durable Metal Stapler, Tacking & Pinning And Double Duty. Weight: 0.196kg Production Dimension: 5in X 2in X 2in Material Type: Metal 5 Piece/s 5 Piece/s 18 Stapler Wire #35 45 Box/es 45 Box/es 19 Staple Remover Plier Type Stainless Steel Lifting Mechanism For Easily Lifting, Gripping And Removing Staples Lightweight And Compact. 8 Piece/s 8 Piece/s 20 Certificate Holder A4 (not Glass) 100 Piece/s 100 Piece/s 21 Power Saving Wireless Mouse 2 Piece/s 2 Piece/s 22 Book Paper, A4, 70gsm 15 Box/es 15 Box/es 23 Ruler Plastic 12inches 10 Piece/s 10 Piece/s 24 Scissors 8 Inches Stainless Steel 10 Piece/s 10 Piece/s 25 Glue 130g, Elmer's Glue 2 Piece/s 2 Piece/s 26 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 12 Pack/s 12 Pack/s 27 Rubberband 50grams Small 2 Box/es 2 Box/es 28 Scanner Wireless High-speed Desktop Scanner | 2.8-inch Touchscreen | Scans Up To 40ppm1 1 Unit 1 Unit 29 Multifunction Printer Black One Size / Eu Plug Colour • With Scanner • Inkjet • Wireless • Wi-fi • Usb • Cloud Ready 1 Unit 1 Unit 30 Lever Arch Top Clip, A4 5 Piece/s 5 Piece/s 31 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 2 Piece/s 2 Piece/s 32 Record Book 200page: Hardbound Covers With Turned And Folded Edges. Weight Per Pack: 200pages, 0.336kg 5 Piece/s 5 Piece/s 33 Highlighter, Neon Colors 5 Piece/s 5 Piece/s 34 Scotch Tape, 1", 50meters 5 Piece/s 5 Piece/s 35 Ballpen, 0.5 Black 10 Piece/s 10 Piece/s 36 Blade Cutter Knife 6inches 2 Piece/s 2 Piece/s 37 Stand File Box Color Black 5 Piece/s 5 Piece/s 38 Double Sided Tape 10meters 10 Piece/s 10 Piece/s Note: Note: One Time Delivery To The Rpmo Located At Koronadal City And Inspection Should Also Be Done In Koronadal City. Delivery Terms Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Dswd Xii, Purok Bumanaag, Brgy. Zone Iii, Koronadal City General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ C. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Sultan Kudarat For 2024 (lot3) The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Ballpen, 0.5 Black 120 Piece/s 120 Piece/s Delivery Of The Goods Is Required One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Po 2 Binder Clip, 19mm 5 Box/es 5 Box/es 3 Binder Clip, 25mm 10 Box/es 10 Box/es 4 Book Paper, A4,70gsm 490 Ream/s 490 Ream/s 5 Book Paper,long,70gsm 5 Ream/s 5 Ream/s 6 Certificate Paper A4 5 Pack/s 5 Pack/s 7 Certificate Holder, A4 24 Piece/s 24 Piece/s 8 Correction Tape 5mm X 8m 50 Piece/s 50 Piece/s 9 Epson Ink 003, Black 112 Piece/s 112 Piece/s 10 Epson Ink 003, Cyan 35 Piece/s 35 Piece/s 11 Epson Ink 003, Yellow 35 Piece/s 35 Piece/s 12 Epson Ink 003, Magenta 30 Piece/s 30 Piece/s 13 Cannon Ink 003, Black 10 Piece/s 10 Piece/s 14 Cannon Ink 003, Cyan 5 Piece/s 5 Piece/s 15 Cannon Ink 003, Yellow 5 Piece/s 5 Piece/s 16 Cannon Ink 003, Magenta 5 Piece/s 5 Piece/s 17 Fastener, 70mm 50 Box/es 50 Box/es 18 Folded Brown Long (100s) 300 Piece/s 300 Piece/s 19 Glue 130g 5 Piece/s 5 Piece/s 20 Highlighter, Neon Colors 24 Piece/s 24 Piece/s 21 Lever Arch File 3", Black 10 Piece/s 10 Piece/s 22 Marker, Permanent , Black , Blue , Red 24 Piece/s 24 Piece/s 23 Marker, Permanent , Black 2 Piece/s 2 Piece/s 24 Note Pad, 2" X 3 35 Pad/s 35 Pad/s 25 Note Pad, 3" X 3 35 Pad/s 35 Pad/s 26 Paper Clip Vinyl Jumbo 55mm 17 Box/es 17 Box/es 27 Paper Clip Vinyl Jumbo 33mm 17 Box/es 17 Box/es 28 Pencil, Eberhard Faber's Woodlinched Bonding Technology No.2 24 Piece/s 24 Piece/s 29 Plastic Envelope, Legal 5 Piece/s 5 Piece/s 30 Rubberband, 50g Small 2 Box/es 2 Box/es 31 Scissors 8" Stainless Steel 5 Pair/s 5 Pair/s 32 Sharpener Desk Heavy Duty 1 Piece/s 1 Piece/s 33 Gel Ink Pen, 0.7 Black 120 Piece/s 120 Piece/s 34 Staple Wire # 35 30 Box 30 Box 35 Stapler, Heavy Duty 2 Piece/s 2 Piece/s 36 Stapler With Remover #35 3 Piece/s 3 Piece/s 37 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 2 Piece/s 2 Piece/s 38 Cork Board 40x60 2 Piece/s 2 Piece/s 39 Vellum Board, Long, 10sheets Per Pack 2 Pack/s 2 Pack/s 39 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Borderless Printing Up To 4r 1 Unit 1 Unit 40 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 66 Pad/s 66 Pad/s Note: One Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco, City Hall Of Tacurong, Sultan Kudarat General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ D. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Sargen Cluster For 2024 (lot4) The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Book Paper A4, 70gsm 117 Box/es 117 Box/es Delivery Of The Goods Is Required One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Po 2 Correction Tape 5mm X 8m 80 Piece/s 80 Piece/s 3 Fastener, 70mm 140 Box/es 140 Box/es 4 Epson Ink 003, Black 74 Piece/s 74 Piece/s 5 Epson Ink 003, Magenta 36 Piece 36 Piece 6 Epson Ink 003, Blue 36 Piece 36 Piece 7 Epson Ink 003, Yellow 36 Piece 36 Piece 8 Epson Ink 664, Black (10) 36 Piece 36 Piece 9 Epson Ink 664, Magenta 14 Piece 14 Piece 10 Epson Ink 664, Blue 14 Piece 14 Piece 11 Epson Ink 664, Yellow 14 Piece 14 Piece 12 Brother Compatible Toner Cartridge Tn660 Guranteed High Quality Compatible Toner Cartridge 101% Brand New. Not Remanufactured Or Refilled. Factory Sealed. Made With All New Parts. 4 Piece 4 Piece 13 Staple Wire #35 30 Box/es 30 Box/es 14 Notepad, 3" X 4 70 Pad/s 70 Pad/s 15 Staple Remover #35 30 Piece/s 30 Piece/s 16 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 96 Pack/s 96 Pack/s 17 Printer All In One Print, Scan, Copy Connectivity: Usb/ Lan/ Wifi/ Wifi Direct/ Lan Compact Integrated Tank Design Print Speeds Up To 15.5ipm For Black And 8.5ipm For Colour Auto-duplex Printing Adf Capability Epson Smart Panel Borderless Printing Up To A4 Size Warranty Of 2 Years Of 50,000 Pages, Whichever Comes First Powered By Epson Heat-free Technology 2 Unit 2 Unit 18 Laser Multi-function Monochrome Printer Monochrome (black & White Only) Print, Scan, Copy, Adf, Wi-fi Automatic 2-sided Print Print Up To Long/legal Scan/copy Up To Long/legal Via Adf Scan/copy Up To Short/a4 Via Flatbed Glass Toner Cartridge Powder 1 Unit 1 Unit 19 Sign Pen, 0.5 Black 85 Piece/s 85 Piece/s 20 Sign Pen, 0.5 Blue 85 Piece/s 85 Piece/s 21 Gel Ink Pen, 0.7 Black 85 Piece/s 85 Piece/s 22 Gel Ink Pen, 0.7 Blue 85 Piece/s 85 Piece/s 23 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 35 Piece/s 35 Piece/s 24 Paper Cip Vinyl Jumbo 55mm 70 Box/es 70 Box/es 25 Paper Cip Vinyl Jumbo 33mm 70 Box/es 70 Box/es 26 Scissors 8" Stainless Steel 36 Piece/s 36 Piece/s 27 Folder Brown Long (100pcs/ Per Ream) 35 Ream/s 35 Ream/s Note: One Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco, City Hall Of General Santos City General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ E. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Cc-i For 2024 (lot5) The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi & Wi-fi Direct Seamless Setup Via Epson Smart Panel Borderless Printing Up To 4r Printer Functions: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Maximum Resolution: 5760 X 1440 Dpi 1 Unit 1 Unit Delivery Of The Goods Is Required One Time Delivery To Provincial Cluster Offices And Within 30 Working Days Upon The Receipt Of The Approved Po 2 Epson Ink 664, Black 11 Piece/s 11 Piece/s 3 Epson Ink 003, Black 38 Piece/s 38 Piece/s 4 Epson Ink 003, Yellow 2 Piece/s 2 Piece/s 5 Epson Ink 003, Cyan 2 Piece/s 2 Piece/s 6 Epson Ink 003, Magenta 2 Piece/s 2 Piece/s 7 Fastener 70mm 55 Box/es 55 Box/es 8 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 11 Piece/s 11 Piece/s 9 Staple Heavy Duty With Remover #35 11 Piece/s 11 Piece/s 10 Staple Wire #35 22 Box/es 22 Box/es 11 Scissors 8" Stainless Steel 11 Piece/s 11 Piece/s 12 Gel Ink Pen, 0.7 Black 55 Piece/s 55 Piece/s 13 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 58 Pack/s 58 Pack/s 14 Book Paper, A4, 70gsm 56 Box/es 56 Box/es 15 Correction Tape 5mm X 8m 33 Piece/s 33 Piece/s 16 Paper Clp Vinyl Jumbo 55mm 33 Box/es 33 Box/es 17 Folder Brown Long (100pcs/ Per Ream) 5 Ream/s 5 Ream/s Note: Delivery Term: "one Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. " Place Of Delivery / Venue: Slp Pco, Kidapawan, North Cotabato General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ F. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Cc-ii For 2024 (lot6) The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Ballpen, 0.5 Black 35 Piece/s 35 Piece/s Delivery Of The Goods Is Required One Time Delivery And Within 30 Working Days Upon The Receipt Of The Approved Po 2 Ballpen, 0.7 Black 35 Piece/s 35 Piece/s 3 Book Paper, A4 70gsm 400 Ream/s 400 Ream/s 4 Book Paper, Long 70gsm 10 Ream/s 10 Ream/s 5 Epson Ink 003, Black 40 Piece/s 40 Piece/s 6 Epson Ink 003, Cyan 20 Piece/s 20 Piece/s 7 Epson Ink 003, Yellow 20 Piece/s 20 Piece/s 8 Epson Ink 003, Magenta 18 Piece/s 18 Piece/s 9 Pencil, Eberhard Faber's Woodclinched Bonding Technology No.2 30 Piece/s 30 Piece/s 10 Sign Pen, 0.5 Black 35 Piece/s 35 Piece/s 11 Sign Pen, 0.5 Blue 35 Piece/s 35 Piece/s 12 Gel Ink Pen, 0.7 Black 35 Piece/s 35 Piece/s 13 Gel Ink Pen, 0.7 Blue 35 Piece/s 35 Piece/s 14 Staple Wire #35 23 Box/es 23 Box/es 15 Printable Sticker Paper A4 50pcs 48 Pack/s 48 Pack/s 16 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi & Wi-fi Direct Seamless Setup Via Epson Smart Panel Borderless Printing Up To 4r Printer Functions: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Maximum Resolution: 5760 X 1440 Dpi 2 Unit/s 2 Unit/s 17 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 67 Pack/s 67 Pack/s Note: Delivery Term: "one Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. " Place Of Delivery / Venue: Slp Pco, Midsayap, North Cotabato General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ Section Vii. Technical Specifications Notes For Preparing The Technical Specifications A Set Of Precise And Clear Specifications Is A Prerequisite For Bidders To Respond Realistically And Competitively To The Requirements Of The Procuring Entity Without Qualifying Their Bids. In The Context Of Competitive Bidding, The Specifications (e.g. Production/delivery Schedule, Manpower Requirements, And After-sales Service/parts, Descriptions Of The Lots Or Items) Must Be Prepared To Permit The Widest Possible Competition And, At The Same Time, Present A Clear Statement Of The Required Standards Of Workmanship, Materials, And Performance Of The Goods And Services To Be Procured. Only If This Is Done Will The Objectives Of Transparency, Equity, Efficiency, Fairness, And Economy In Procurement Be Realized, Responsiveness Of Bids Be Ensured, And The Subsequent Task Of Bid Evaluation And Post-qualification Facilitated. The Specifications Should Require That All Items, Materials And Accessories To Be Included Or Incorporated In The Goods Be New, Unused, And Of The Most Recent Or Current Models, And That They Include Or Incorporate All Recent Improvements In Design And Materials Unless Otherwise Provided In The Contract. Samples Of Specifications From Previous Similar Procurements Are Useful In This Respect. The Use Of Metric Units Is Encouraged. Depending On The Complexity Of The Goods And The Repetitiveness Of The Type Of Procurement, It May Be Advantageous To Standardize The General Technical Specifications And Incorporate Them In A Separate Subsection. The General Technical Specifications Should Cover All Classes Of Workmanship, Materials, And Equipment Commonly Involved In Manufacturing Similar Goods. Deletions Or Addenda Should Then Adapt The General Technical Specifications To The Particular Procurement. Care Must Be Taken In Drafting Specifications To Ensure That They Are Not Restrictive. In The Specification Of Standards For Equipment, Materials, And Workmanship, Recognized Philippine And International Standards Should Be Used As Much As Possible. Where Other Particular Standards Are Used, Whether National Standards Or Other Standards, The Specifications Should State That Equipment, Materials, And Workmanship That Meet Other Authoritative Standards, And Which Ensure At Least A Substantially Equal Quality Than The Standards Mentioned, Will Also Be Acceptable. The Following Clause May Be Inserted In The Special Conditions Of Contract Or The Technical Specifications. Sample Clause: Equivalency Of Standards And Codes Wherever Reference Is Made In The Technical Specifications To Specific Standards And Codes To Be Met By The Goods And Materials To Be Furnished Or Tested, The Provisions Of The Latest Edition Or Revision Of The Relevant Standards And Codes Shall Apply, Unless Otherwise Expressly Stated In The Contract. Where Such Standards And Codes Are National Or Relate To A Particular Country Or Region, Other Authoritative Standards That Ensure Substantial Equivalence To The Standards And Codes Specified Will Be Acceptable. Reference To Brand Name And Catalogue Number Should Be Avoided As Far As Possible; Where Unavoidable They Should Always Be Followed By The Words “or At Least Equivalent.” References To Brand Names Cannot Be Used When The Funding Source Is The Gop. Where Appropriate, Drawings, Including Site Plans As Required, May Be Furnished By The Procuring Entity With The Bidding Documents. Similarly, The Supplier May Be Requested To Provide Drawings Or Samples Either With Its Bid Or For Prior Review By The Procuring Entity During Contract Execution. Bidders Are Also Required, As Part Of The Technical Specifications, To Complete Their Statement Of Compliance Demonstrating How The Items Comply With The Specification. Technical Specifications A. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of South Cotabato Cluster For 2024 (lot1) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Book Paper, A4 70gsm 315 Box/es 2 Correction Tape 5mm X 8m 62 Piece/s 3 Fastener, 70mm Plastic 10 Box/es 4 Epson Ink 003, Black 20 Piece/s 5 Epson Ink 664, Black 20 Piece/s 6 Staple Wire #35 32 Piece/s 7 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 35 Pad/s 8 Ballpen. 0.5 Black 165 Piece/s 9 Ballpen. 0.5 Blue 164 Piece/s 10 Sign Pen, 0.5 Black 7 Piece/s 11 Gel Ink Pen, 0.7 Black 96 Piece/s 12 Gel Ink Pen, 0.7 Blue 96 Piece/s 13 Stapler With Remover #35 32 Piece/s 14 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi & Wi-fi Direct Seamless Setup Borderless Printing Up To 4r Printer Functions: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Maximum Resolution: 5760 X 1440 Dpi 2 Unit /s Note: Delivery Term: One Time Delivery To The Provincial Cluster Office (po) Located At Koronadal City And Inspection Should Also Be Done In Pco-koronadal City. Delivery Terms Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco South Cotabato, South Cotabato Gymnasium, Koronadal City General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ B. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Rpmo For 2024 (lot2) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Pentel Pen, Black 10 Piece/s 2 Epson 003, Black 20 Piece/s 3 Epson 003, Cyan 10 Piece/s 4 Epson 003, Magenta 10 Piece/s 5 Epson 003, Yellow 10 Piece/s 6 Vellum, Board A4 200gsm, 10 Sheets Per Pack 100 Pack/s 7 Binder Clip, Small 20 Piece/s 8 Binder Clip, Medium 20 Piece/s 9 Binder Clip, Large 10 Piece/s 10 Notepad 2"x3 10 Pad/s 11 Notepad 3"x4 10 Pad/s 12 Paper Clip Vinyl Jumbo 55mm 10 Box/es 13 Paper Clip Vinyl Small 33mm 10 Box/es 14 Pencil Eberhard Faber's Wood Clinched Bonding Technology No. 2 10 Piece/s 15 Gel Ink Pen, 0.7 Black 10 Piece/s 16 Gel Ink Pen, 0.7 Blue 10 Piece/s 17 Stapler With Remover #35, Durable Metal Stapler, Tacking & Pinning And Double Duty. Weight: 0.196kg Production Dimension: 5in X 2in X 2in Material Type: Metal 5 Piece/s 18 Stapler Wire #35 45 Box/es 19 Staple Remover Plier Type Stainless Steel Lifting Mechanism For Easily Lifting, Gripping And Removing Staples Lightweight And Compact. 8 Piece/s 20 Certificate Holder A4 (not Glass) 100 Piece/s 21 Power Saving Wireless Mouse 2 Piece/s 22 Book Paper, A4, 70gsm 15 Box/es 23 Ruler Plastic 12inches 10 Piece/s 24 Scissors 8 Inches Stainless Steel 10 Piece/s 25 Glue 130g, Elmer's Glue 2 Piece/s 26 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 12 Pack/s 27 Rubberband 50grams Small 2 Box/es 28 Scanner Wireless High-speed Desktop Scanner | 2.8-inch Touchscreen | Scans Up To 40ppm1 1 Unit 29 Multifunction Printer Black One Size / Eu Plug Colour • With Scanner • Inkjet • Wireless • Wi-fi • Usb • Cloud Ready 1 Unit 30 Lever Arch Top Clip, A4 5 Piece/s 31 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 2 Piece/s 32 Record Book 200page: Hardbound Covers With Turned And Folded Edges. Weight Per Pack: 200pages, 0.336kg 5 Piece/s 33 Highlighter, Neon Colors 5 Piece/s 34 Scotch Tape, 1", 50meters 5 Piece/s 35 Ballpen, 0.5 Black 10 Piece/s 36 Blade Cutter Knife 6inches 2 Piece/s 37 Stand File Box Color Black 5 Piece/s 38 Double Sided Tape 10meters 10 Piece/s Note: Delivery Term: Note: One Time Delivery To The Rpmo Located At Koronadal City And Inspection Should Also Be Done In Koronadal City. Delivery Terms Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Dswd Xii, Purok Bumanaag, Brgy. Zone Iii, Koronadal City General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ C. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Sultan Kudarat For 2024 (lot3) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Ballpen, 0.5 Black 120 Piece/s 2 Binder Clip, 19mm 5 Box/es 3 Binder Clip, 25mm 10 Box/es 4 Book Paper, A4,70gsm 490 Ream/s 5 Book Paper,long,70gsm 5 Ream/s 6 Certificate Paper A4 5 Pack/s 7 Certificate Holder, A4 24 Piece/s 8 Correction Tape 5mm X 8m 50 Piece/s 9 Epson Ink 003, Black 112 Piece/s 10 Epson Ink 003, Cyan 35 Piece/s 11 Epson Ink 003, Yellow 35 Piece/s 12 Epson Ink 003, Magenta 30 Piece/s 13 Cannon Ink 003, Black 10 Piece/s 14 Cannon Ink 003, Cyan 5 Piece/s 15 Cannon Ink 003, Yellow 5 Piece/s 16 Cannon Ink 003, Magenta 5 Piece/s 17 Fastener, 70mm 50 Box/es 18 Folded Brown Long (100s) 300 Piece/s 19 Glue 130g 5 Piece/s 20 Highlighter, Neon Colors 24 Piece/s 21 Lever Arch File 3", Black 10 Piece/s 22 Marker, Permanent , Black , Blue , Red 24 Piece/s 23 Marker, Permanent , Black 2 Piece/s 24 Note Pad, 2" X 3 35 Pad/s 25 Note Pad, 3" X 3 35 Pad/s 26 Paper Clip Vinyl Jumbo 55mm 17 Box/es 27 Paper Clip Vinyl Jumbo 33mm 17 Box/es 28 Pencil, Eberhard Faber's Woodlinched Bonding Technology No.2 24 Piece/s 29 Plastic Envelope, Legal 5 Piece/s 30 Rubberband, 50g Small 2 Box/es 31 Scissors 8" Stainless Steel 5 Pair/s 32 Sharpener Desk Heavy Duty 1 Piece/s 33 Gel Ink Pen, 0.7 Black 120 Piece/s 34 Staple Wire # 35 30 Box 35 Stapler, Heavy Duty 2 Piece/s 36 Stapler With Remover #35 3 Piece/s 37 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 2 Piece/s 38 Cork Board 40x60 2 Piece/s 39 Vellum Board, Long, 10sheets Per Pack 2 Pack/s 39 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Borderless Printing Up To 4r 1 Unit 40 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 66 Pack/s Note: Delivery Term: One Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco, City Hall Of Tacurong, Sultan Kudarat General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ D. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Sargen For 2024 (lot4) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Book Paper A4, 70gsm 117 Box/es 2 Correction Tape 5mm X 8m 80 Piece/s 3 Fastener, 70mm 140 Box/es 4 Epson Ink 003, Black 74 Piece/s 5 Epson Ink 003, Magenta 36 Piece 6 Epson Ink 003, Blue 36 Piece 7 Epson Ink 003, Yellow 36 Piece 8 Epson Ink 664, Black (10) 36 Piece 9 Epson Ink 664, Magenta 14 Piece 10 Epson Ink 664, Blue 14 Piece 11 Epson Ink 664, Yellow 14 Piece 12 Brother Compatible Toner Cartridge Tn660 Guranteed High Quality Compatible Toner Cartridge 101% Brand New. Not Remanufactured Or Refilled. Factory Sealed. Made With All New Parts. 4 Piece 13 Staple Wire #35 30 Box/es 14 Notepad, 3" X 4 70 Pad/s 15 Staple Remover #35 30 Piece/s 16 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 96 Pack/s 17 Printer All In One Print, Scan, Copy Connectivity: Usb/ Lan/ Wifi/ Wifi Direct/ Lan Compact Integrated Tank Design Print Speeds Up To 15.5ipm For Black And 8.5ipm For Colour Auto-duplex Printing Adf Capability Epson Smart Panel Borderless Printing Up To A4 Size Warranty Of 2 Years Of 50,000 Pages, Whichever Comes First Powered By Epson Heat-free Technology 2 Unit 18 Laser Multi-function Monochrome Printer Monochrome (black & White Only) Print, Scan, Copy, Adf, Wi-fi Automatic 2-sided Print Print Up To Long/legal Scan/copy Up To Long/legal Via Adf Scan/copy Up To Short/a4 Via Flatbed Glass Toner Cartridge Powder 1 Unit 19 Sign Pen, 0.5 Black 85 Piece/s 20 Sign Pen, 0.5 Blue 85 Piece/s 21 Gel Ink Pen, 0.7 Black 85 Piece/s 22 Gel Ink Pen, 0.7 Blue 85 Piece/s 23 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 35 Piece/s 24 Paper Cip Vinyl Jumbo 55mm 70 Box/es 25 Paper Cip Vinyl Jumbo 33mm 70 Box/es 26 Scissors 8" Stainless Steel 36 Piece/s 27 Folder Brown Long (100pcs/ Per Ream) 35 Ream/s Note: Delivery Term: One Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco, City Hall Of General Santos City General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ E. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Cc-i For 2024 (lot5) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi & Wi-fi Direct Seamless Setup Via Epson Smart Panel Borderless Printing Up To 4r Printer Functions: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Maximum Resolution: 5760 X 1440 Dpi 1 Unit 2 Epson Ink 664, Black 11 Piece/s 3 Epson Ink 003, Black 38 Piece/s 4 Epson Ink 003, Yellow 2 Piece/s 5 Epson Ink 003, Cyan 2 Piece/s 6 Epson Ink 003, Magenta 2 Piece/s 7 Fastener 70mm 55 Box/es 8 Puncher Heavy Duty 70mm Weight: 0.533kg Product Dimension: 6.5in X 2in X 4in Material Type: Metal 11 Piece/s 9 Staple Heavy Duty With Remover #35 11 Piece/s 10 Staple Wire #35 22 Box/es 11 Scissors 8" Stainless Steel 11 Piece/s 12 Gel Ink Pen, 0.7 Black 55 Piece/s 13 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 58 Pack/s 14 Book Paper, A4, 70gsm 56 Box/es 15 Correction Tape 5mm X 8m 33 Piece/s 16 Paper Clp Vinyl Jumbo 55mm 33 Box/es 17 Folder Brown Long (100pcs/ Per Ream) 5 Ream Note: Delivery Term: One Time Delivery To The Provincial Cluster, Within 30 Working Days Upon The Receipt Of The P.o. Place Of Delivery / Venue: Slp Pco, Kidapawan, North Cotabato General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ F. Dswd12-slp-2024-10-023 Procurement Of Office Supplies For Slp Provincial Staff Of Cc-ii For 2024 (lot6) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Ballpen, 0.5 Black 35 Piece/s 2 Ballpen, 0.7 Black 35 Piece/s 3 Book Paper, A4 70gsm 400 Ream/s 4 Book Paper, Long 70gsm 10 Ream/s 5 Epson Ink 003, Black 40 Piece/s 6 Epson Ink 003, Cyan 20 Piece/s 7 Epson Ink 003, Yellow 20 Piece/s 8 Epson Ink 003, Magenta 18 Piece/s 9 Pencil, Eberhard Faber's Woodclinched Bonding Technology No.2 30 Piece/s 10 Sign Pen, 0.5 Black 35 Piece/s 11 Sign Pen, 0.5 Blue 35 Piece/s 12 Gel Ink Pen, 0.7 Black 35 Piece/s 13 Gel Ink Pen, 0.7 Blue 35 Piece/s 14 Staple Wire #35 23 Box/es 15 Printable Sticker Paper A4 50pcs 48 Pack/s 16 All In One Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi & Wi-fi Direct Seamless Setup Via Epson Smart Panel Borderless Printing Up To 4r Printer Functions: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Maximum Resolution: 5760 X 1440 Dpi 2 Unit 17 Sticky Notes Stylish Film Index Pet Sign Here Arrow Flag, Waterproof (with At Least 5 Different Colors, Including Pink And Blue) 67 Pack/s Note: Delivery Term: One Time Delivery To The Provincial Cluster. Delivery Terms Within 30 Working Days Upon The Receipt Of The Approved P.o. General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed Government Projects For The Last Year. Any Unsatisfactory Performance Will Result In Disqualification In Accordance With The Rdc Resolution Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ Section Viii. Checklist Of Technical And Financial Documents Notes On The Checklist Of Technical And Financial Documents The Prescribed Documents In The Checklist Are Mandatory To Be Submitted In The Bid, But Shall Be Subject To The Following: A. Gppb Resolution No. 09-2020 On The Efficient Procurement Measures During A State Of Calamity Or Other Similar Issuances That Shall Allow The Use Of Alternate Documents In Lieu Of The Mandated Requirements; Or B. Any Subsequent Gppb Issuances Adjusting The Documentary Requirements After The Effectivity Of The Adoption Of The Pbds. The Bac Shall Be Checking The Submitted Documents Of Each Bidder Against This Checklist To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion Pursuant To Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (k) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (l) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description Philippine Bidding Documents Bidding For The Supply And Delivery Of Motor Vehicle Sixth Edition July 2020 Preface These Philippine Bidding Documents (pbds) For The Procurement Of Goods Through Competitive Bidding Have Been Prepared By The Government Of The Philippines For Use By Any Branch, Constitutional Commission Or Office, Agency, Department, Bureau, Office, Or Instrumentality Of The Government Of The Philippines, National Government Agencies, Including Government-owned And/or Controlled Corporations, Government Financing Institutions, State Universities And Colleges, And Local Government Unit. The Procedures And Practices Presented In This Document Have Been Developed Through Broad Experience, And Are For Mandatory Use In Projects That Are Financed In Whole Or In Part By The Government Of The Philippines Or Any Foreign Government/foreign Or International Financing Institution In Accordance With The Provisions Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. The Bidding Documents Shall Clearly And Adequately Define, Among Others: (i) The Objectives, Scope, And Expected Outputs And/or Results Of The Proposed Contract Or Framework Agreement, As The Case May Be; (ii) The Eligibility Requirements Of Bidders; (iii) The Expected Contract Or Framework Agreement Duration, The Estimated Quantity In The Case Of Procurement Of Goods, Delivery Schedule And/or Time Frame; And (iv) The Obligations, Duties, And/or Functions Of The Winning Bidder. Care Should Be Taken To Check The Relevance Of The Provisions Of The Pbds Against The Requirements Of The Specific Goods To Be Procured. If Duplication Of A Subject Is Inevitable In Other Sections Of The Document Prepared By The Procuring Entity, Care Must Be Exercised To Avoid Contradictions Between Clauses Dealing With The Same Matter. Moreover, Each Section Is Prepared With Notes Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Shall Not Be Included In The Final Documents. The Following General Directions Should Be Observed When Using The Documents: A. All The Documents Listed In The Table Of Contents Are Normally Required For The Procurement Of Goods. However, They Should Be Adapted As Necessary To The Circumstances Of The Particular Procurement Project. B. Specific Details, Such As The “name Of The Procuring Entity” And “address For Bid Submission,” Should Be Furnished In The Instructions To Bidders, Bid Data Sheet, And Special Conditions Of Contract. The Final Documents Should Contain Neither Blank Spaces Nor Options. C. This Preface And The Footnotes Or Notes In Italics Included In The Invitation To Bid, Bid Data Sheet, General Conditions Of Contract, Special Conditions Of Contract, Schedule Of Requirements, And Specifications Are Not Part Of The Text Of The Final Document, Although They Contain Instructions That The Procuring Entity Should Strictly Follow. D. The Cover Should Be Modified As Required To Identify The Bidding Documents As To The Procurement Project, Project Identification Number, And Procuring Entity, In Addition To The Date Of Issue. E. Modifications For Specific Procurement Project Details Should Be Provided In The Special Conditions Of Contract As Amendments To The Conditions Of Contract. For Easy Completion, Whenever Reference Has To Be Made To Specific Clauses In The Bid Data Sheet Or Special Conditions Of Contract, These Terms Shall Be Printed In Bold Typeface On Sections I (instructions To Bidders) And Iii (general Conditions Of Contract), Respectively. F. For Guidelines On The Use Of Bidding Forms And The Procurement Of Foreign-assisted Projects, These Will Be Covered By A Separate Issuance Of The Government Procurement Policy Board. Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….4 Section I. Invitation To Bid……………………………………………………..7 Section Ii. Instructions To Bidders…………………………………………...10 1. Scope Of Bid ………………………………………………………………………. 11 2. Funding Information………………………………………………………………. 11 3. Bidding Requirements ……………………………………………………………. 11 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 11 5. Eligible Bidders…………………………………………………………………… 11 6. Origin Of Goods ………………………………………………………………….. 12 7. Subcontracts ……………………………………………………………………… 12 8. Pre-bid Conference ………………………………………………………………. 12 9. Clarification And Amendment Of Bidding Documents …………………………… 12 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 12 11. Documents Comprising The Bid: Financial Component …………………………... 13 12. Bid Prices …………………………………………………………………………. 13 13. Bid And Payment Currencies ……………………………………………………… 13 14. Bid Security ………………………………………………………………………. 14 15. Sealing And Marking Of Bids ……………………………………………………… 14 16. Deadline For Submission Of Bids …………………………………………………. 14 17. Opening And Preliminary Examination Of Bids ………………………………….. 14 18. Domestic Preference ……………………………………………………………… 15 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 15 20. Post-qualification ………………………………………………………………… 15 21. Signing Of The Contract …………………………………………………………… 16 Section Iii. Bid Data Sheet …………………………………………………..17 Section Iv. General Conditions Of Contract ……………………...………..19 1. Scope Of Contract ………………………………………………………………… 20 2. Advance Payment And Terms Of Payment ……………………………………….. 20 3. Performance Security ……………………………………………………………. 20 4. Inspection And Tests ……………………………………………………………… 20 5. Warranty …………………………………………………………………………. 21 6. Liability Of The Supplier ………………………………………………………….. 21 Section V. Special Conditions Of Contract ………………………………….22 Section Vi. Schedule Of Requirements ……………………………………....25 Section Vii. Technical Specifications …………………………………………26 Section Viii. Checklist Of Technical And Financial Documents …………..31 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dmw – Department Of Migrant Workers Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Owwa – Overseas Workers Welfare Administration Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Rwo – Regional Welfare Office Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Notes On The Invitation To Bid The Invitation To Bid (ib) Provides Information That Enables Potential Bidders To Decide Whether To Participate In The Procurement At Hand. The Ib Shall Be Posted In Accordance With Section 21.2 Of The 2016 Revised Irr Of Ra No. 9184. Apart From The Essential Items Listed In The Bidding Documents, The Ib Should Also Indicate The Following: A. The Date Of Availability Of The Bidding Documents, Which Shall Be From The Time The Ib Is First Advertised/posted Until The Deadline For The Submission And Receipt Of Bids; B. The Place Where The Bidding Documents May Be Acquired Or The Website Where It May Be Downloaded; C. The Deadline For The Submission And Receipt Of Bids; And D. Any Important Bid Evaluation Criteria (e.g., The Application Of A Margin Of Preference In Bid Evaluation). The Ib Should Be Incorporated In The Bidding Documents. The Information Contained In The Ib Must Conform To The Bidding Documents And In Particular To The Relevant Information In The Bid Data Sheet. Invitation To Bid For The Supply And Delivery Of Motor Vehicle (brand New 2024 Model Passenger Van) 1. The Overseas Workers Welfare Administration (owwa) Regional Welfare Office Xi (rwo Xi), Through The General Appropriations Act Cy 2024 Intends To Apply The Sum Of Two Million Ninety Thousand Pesos (php 2,090,000.00) Being The Abc To Payments Under The Contract For Bidding For The Supply And Delivery Of Motor Vehicle (brand New 2024 Model Passenger Van), Pb-10-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Owwa Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required On Or Before March 1, 2025. Bidders Should Have Completed, Within The Last Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Owwa Rwo Xi Bac Secretariat. The Bidding Documents Can Be Viewed At The Owwa Website At Www.owwa.gov.ph Click The “bids And Awards” Icon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 8 To November 21, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Two Thousand Pesos (php 2,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or By Facsimile, Or 6. The Owwa Will Hold A Pre-bid Conference On 08 November 2024, 1:30 P.m. Through A Hybrid Face-to-face Conference And Video Conferencing Or Webcasting Via Zoom, Which Shall Be Open To Prospective Bidders. (see Attached Guidelines On The Conduct Of Pre-bid Conference). 7. Bids Must Be Duly Received By The Bac Secretariat In A Sealed Envelope Or Electronic Submission On Or Before 21 November 2024, 11:00 A.m. Late Bids Shall Not Be Accepted. (see Attached Guidelines On Bid Submission). 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 21 November 2024, 1:30 Pm Through Hybrid Face-to-face Conference And Via Zoom. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Owwa Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Name Of Officer : Anne A. Alban Name Of Office : Owwa Rwo Xi Address : Lynjun Alegre-sardidobesjc Bldg., Candelaria St., Ecoland Ii, Davao City Mobile Number : 0951-374-1457 Whatsapp/viber : 0951-374-1457 Email Address : Region11@owwa.gov.ph Owwadavao11@gmail.com Owwadavaoprocurement@gmail.com Facebook Page : Https://bit.ly/owwadavaoprocurement Website Address : Www.owwa.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.bidding.owwa.gov.ph For Online Bid Submission: Please Check Attached Guidelines On The Bid Submission Mayette A. Almano Bac Chairperson Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Owwa Rwo Xi Wishes To Receive Bids For The Bidding For Supply And Delivery Of Motor Vehicle (brand New 2024 Model Passenger Van) With Identification Number Pb-10-2024. The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Unit, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Cy 2024 In The Amount Of Two Million Ninety Thousand Pesos (php2,090,000.00). 2.2. The Source Of Funding Is: A. Nga, The General Appropriations Act Or Special Appropriations. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within The Last Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Calendar Days From The Date Of Opening Of Bids. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 2 – One Project Having Several Items Grouped Into Several Lots, Which Shall Be Awarded As Separate Contracts Per Lot. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Notes On The Bid Data Sheet The Bid Data Sheet (bds) Consists Of Provisions That Supplement, Amend, Or Specify In Detail, Information, Or Requirements Included In The Itb Found In Section Ii, Which Are Specific To Each Procurement. This Section Is Intended To Assist The Procuring Entity In Providing The Specific Information In Relation To Corresponding Clauses In The Itb And Has To Be Prepared For Each Specific Procurement. The Procuring Entity Should Specify In The Bds Information And Requirements Specific To The Circumstances Of The Procuring Entity, The Processing Of The Procurement, And The Bid Evaluation Criteria That Will Apply To The Bids. In Preparing The Bds, The Following Aspects Should Be Checked: A. Information That Specifies And Complements Provisions Of The Itb Must Be Incorporated. B. Amendments And/or Supplements, If Any, To Provisions Of The Itb As Necessitated By The Circumstances Of The Specific Procurement, Must Also Be Incorporated. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply And Delivery Of Motor Vehicle (brand New 2024 Model Passenger Van). B. Completed Within The Last Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp In Owwa Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amount A. The Amount Of Not Less Than Forty-one Thousand Eight Hundred Pesos (php 41,800.00), Equivalent To Two Percent 2% Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than One Hundred Four Thousand Five Hundred Pesos (php 104,500.00), Equivalent To Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 19.3 One (1) Lot Abc – Php 2,090,000.00 20.2 Not Applicable 21.2 Not Applicable Section Iv. General Conditions Of Contract Notes On The General Conditions Of Contract The General Conditions Of Contract (gcc) In This Section, Read In Conjunction With The Special Conditions Of Contract In Section V And Other Documents Listed Therein, Should Be A Complete Document Expressing All The Rights And Obligations Of The Parties. Matters Governing Performance Of The Supplier, Payments Under The Contract, Or Matters Affecting The Risks, Rights, And Obligations Of The Parties Under The Contract Are Included In The Gcc And Special Conditions Of Contract. Any Complementary Information, Which May Be Needed, Shall Be Introduced Only Through The Special Conditions Of Contract. 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Notes On The Special Conditions Of Contract Similar To The Bds, The Clauses In This Section Are Intended To Assist The Procuring Entity In Providing Contract-specific Information In Relation To Corresponding Clauses In The Gcc Found In Section Iv. The Special Conditions Of Contract (scc) Complement The Gcc, Specifying Contractual Requirements Linked To The Special Circumstances Of The Procuring Entity, The Procuring Entity’s Country, The Sector, And The Goods Purchased. In Preparing This Section, The Following Aspects Should Be Checked: A. Information That Complements Provisions Of The Gcc Must Be Incorporated. B. Amendments And/or Supplements To Provisions Of The Gcc As Necessitated By The Circumstances Of The Specific Purchase, Must Also Be Incorporated. However, No Special Condition Which Defeats Or Negates The General Intent And Purpose Of The Provisions Of The Gcc Should Be Incorporated Herein. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: “the Delivery Terms Applicable To The Contract Are Ddp Delivered In Owwa Rwo Xi. In Accordance With Incoterms.” “the Delivery Terms Applicable To This Contract Are In Owwa Rwo Xi. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is: Name Of End-user : Anne A. Alban Name Of Office : Owwa Rwo Xi Contact Number : 0951-374-1457 Email Address : Owwadavao11@gmail.com Owwadavaoprocurement@gmail.com Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. [specify Additional Incidental Service Requirements, As Needed.] The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: A. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And B. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Cost Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of [indicate Here The Time Period Specified. If Not Used Indicate A Time Period Of Three Times The Warranty Period]. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within [insert Appropriate Time Period] Months Of Placing The Order. 2.2 [if Partial Payment Is Allowed, State] “the Terms Of Payment Shall Be As Follows: _____________.” 4 The Inspections And Tests That Will Be Conducted Are: [indicate The Applicable Inspections And Tests] Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Brand New 2024 Model Passenger Van 1 Unit 1 Units Will Be Delivered Within Ninety (90) Days Upon Receipt Of Notice To Proceed. Section Vii. Technical Specifications Notes For Preparing The Technical Specifications A Set Of Precise And Clear Specifications Is A Prerequisite For Bidders To Respond Realistically And Competitively To The Requirements Of The Procuring Entity Without Qualifying Their Bids. In The Context Of Competitive Bidding, The Specifications (e.g. Production/delivery Schedule, Manpower Requirements, And After-sales Service/parts, Descriptions Of The Lots Or Items) Must Be Prepared To Permit The Widest Possible Competition And, At The Same Time, Present A Clear Statement Of The Required Standards Of Workmanship, Materials, And Performance Of The Goods And Services To Be Procured. Only If This Is Done Will The Objectives Of Transparency, Equity, Efficiency, Fairness , And Economy In Procurement Be Realized, Responsiveness Of Bids Be Ensured, And The Subsequent Task Of Bid Evaluation And Post-qualification Facilitated. The Specifications Should Require That All Items, Materials And Accessories To Be Included Or Incorporated In The Goods Be New, Unused, And Of The Most Recent Or Current Models, And That They Include Or Incorporate All Recent Improvements In Design And Materials Unless Otherwise Provided In The Contract. Samples Of Specifications From Previous Similar Procurements Are Useful In This Respect. The Use Of Metric Units Is Encouraged. Depending On The Complexity Of The Goods And The Repetitiveness Of The Type Of Procurement, It May Be Advantageous To Standardize The General Technical Specifications And Incorporate Them In A Separate Subsection. The General Technical Specifications Should Cover All Classes Of Workmanship, Materials, And Equipment Commonly Involved In Manufacturing Similar Goods. Deletions Or Addenda Should Then Adapt The General Technical Specifications To The Particular Procurement. Care Must Be Taken In Drafting Specifications To Ensure That They Are Not Restrictive. In The Specification Of Standards For Equipment, Materials, And Workmanship, Recognized Philippine And International Standards Should Be Used As Much As Possible. Where Other Particular Standards Are Used, Whether National Standards Or Other Standards, The Specifications Should State That Equipment, Materials, And Workmanship That Meet Other Authoritative Standards, And Which Ensure At Least A Substantially Equal Quality Than The Standards Mentioned, Will Also Be Acceptable. The Following Clause May Be Inserted In The Special Conditions Of Contract Or The Technical Specifications. Sample Clause: Equivalency Of Standards And Codes Wherever Reference Is Made In The Technical Specifications To Specific Standards And Codes To Be Met By The Goods And Materials To Be Furnished Or Tested, The Provisions Of The Latest Edition Or Revision Of The Relevant Standards And Codes Shall Apply, Unless Otherwise Expressly Stated In The Contract. Where Such Standards And Codes Are National Or Relate To A Particular Country Or Region, Other Authoritative Standards That Ensure Substantial Equivalence To The Standards And Codes Specified Will Be Acceptable. Reference To Brand Name And Catalogue Number Should Be Avoided As Far As Possible; Where Unavoidable They Should Always Be Followed By The Words “or At Least Equivalent.” References To Brand Names Cannot Be Used When The Funding Source Is The Gop. Where Appropriate, Drawings, Including Site Plans As Required, May Be Furnished By The Procuring Entity With The Bidding Documents. Similarly, The Supplier May Be Requested To Provide Drawings Or Samples Either With Its Bid Or For Prior Review By The Procuring Entity During Contract Execution. Bidders Are Also Required, As Part Of The Technical Specifications, To Complete Their Statement Of Compliance Demonstrating How The Items Comply With The Specification. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] Procurement Of One (1) Unit Brand New 2024 Model Passenger Van Particulars Description Engine And Transmission Model: Latest Available Brand New Model Body Type: Passenger Van Transmission: Minimum 6-speed Manual Diesel Displacement: At Least 2,755cc But Not More Than 3,000cc Number Of Cylinders: 4 Number Of Valves: 16 Fuel Type: Diesel Euro 4 Compliant Power: At Least 176 Ps Torque: At Least 420 N-m Body Dimension Width: At Least 1950 Mm Number Of Doors: 4 Doors (2-side Doors For Driver And Front Passenger, One (1) Side Sliding Door And A Tailgate Seats Capacity: Standard Capacity Of 15 Passengers Seat Material: Fabric Tires And Wheels Tire Size: At Least 215/70r16 Steel W/ Full Cap Safety Security Equipped With At Least A Driver And Front Passenger Side Airbags, Seatbelts Rear Suspension: Mcpherson Strut/rigid Axle With Leaf Spring Brakes: Ventilated Disc/drum Equipped With Variable Power Steering And Anti-lock Brake System (abs), Alarm With Reverse Camera Color White Inclusions 1. Tint, Rust Proofing, Vinyl Floor Mats And Seat Cover 2. Free Labor On Periodic Maintenance Service For 1,000 And 5,000 Kms Check-up 3. Standard Tools, Jack And Ewd 4. Three (3) Years Lto Registration 5. One (1) Year Tpl Insurance 6. One (1) Year Gsis Comprehensive Insurance 7. Maintenance And Warranty Manual In Leather Holder Warranty Three (3) Years From The Date Of Acceptance Of The End-user Or 100,000 Kilometers From The Date Of Acceptance, Whichever Comes First Green Public Procurement Requirement (gppb) The Supplier Shall Demonstrate Guarantee The Availability Of Parts For The Specific Vehicle Model For At Least 7 Years From The Same Production Of The Particular Model Ceases. Other Requirements 1. Only Direct Dealers Are Allowed To Bid; 2. Bidders Should Have Completed, Within The Last Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project; 3. Inspection Of Vehicles During Post-qualification Shall Be Made Within The Showroom Of The Direct Dealer. 4. Availability Of Spare Parts All Over The Philippines; 5. Bidder Must Have Authorized/accredited Service Centers Nationwide; 6. After Sales Service - Submission Of Certificate Of After Sales Service And Availability Of Spare Parts Within The Warranty Period With The List Of Authorized/accredited Service Centers In The Philippines Indicating The Address, Contact Numbers And Contact Person; 7. Manuals – Supplier Shall Provide Maintenance Manuals In English Language; 8. Original Warranty/guarantee Certificates Shall Be Issued In The Name Of The Overseas Workers Welfare Administration Regional Office Xi (owwa Rwo Xi); 9. Owwa Rwo Xi Reserves The Right To Inspect Or Test The Commodities And/or Materials Within The Showroom Of The Supplier And Accept Or Reject Any Or All Of The Items Delivered Not In Accordance With The Required Specifications. All Costs Of Testing Shall Be For The Account Of The Supplier; 10. The Winning Bidder Shall Warrant That The Goods Subject To The Contract Is Free From Latent Defects Which Are Not Apparent During The Inspection And Testing Periods; Total Budgetary Requirements Two Million Ninety Thousand (php 2,090,000.00) Fund Source Available Funds Of Capex Cy 2024 Terms Of Payment Government Terms Delivery Period Within Ninety (90) Calendar Days From The Receipt Of The Notice To Proceed (ntp) Section Viii. Checklist Of Technical And Financial Documents Notes On The Checklist Of Technical And Financial Documents The Prescribed Documents In The Checklist Are Mandatory To Be Submitted In The Bid, But Shall Be Subject To The Following: A. Gppb Resolution No. 09-2020 On The Efficient Procurement Measures During A State Of Calamity Or Other Similar Issuances That Shall Allow The Use Of Alternate Documents In Lieu Of The Mandated Requirements; Or B. Any Subsequent Gppb Issuances Adjusting The Documentary Requirements After The Effectivity Of The Adoption Of The Pbds. The Bac Shall Be Checking The Submitted Documents Of Each Bidder Against This Checklist To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion Pursuant To Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ A) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ B) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ C) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ D) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ E) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ F) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ G) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ H) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ I) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ J) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity. 24 Financial Component Envelope ⬜ (a) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (b) Original Of Duly Signed And Accomplished Price Schedule(s). Bidding For The Supply And Delivery Of Motor Vehicle Guidelines I. Payment Of Non-refundable Bidding Documents Fee Manual Payment 1. Bidder/representative Shall Request For Order Of Payment For The Payment Of Bidding Document At The 3rd Floor Lynjun Alegre-sardiro Besjc Bldg., Candelaria Street, Ecoland Ii, Davao City. 2. Bidder/representative Shall Pay The Corresponding Amount Either Cash Or Check To The Collection Unit Which Is Also Located At 3rd Floor. Payment Of Non-refundable Fee Should Not Be Later Than The Submission Of Bids. 3. Bidder/representative Shall Received The Bidding Documents Upon Payment Of The Bid Price. Ii. Pre-bid Conference 1. Prospective Bidders Shall Submit A Letter Request Signifying Their Intention To Participate In The Pre-bid Conference Either By Mail Or Through Email At Owwadavaoprocurement@gmail.com/owwadavao11@gmail.com Before The Scheduled Activity. 2. The Bac Secretariat Shall Assign A Number To Each Representative For Proper Sequence/ Arrangement During The Open Forum. 3. Each Representative Shall Be Given A Period Of Thirty (30) Minutes To Raise Questions And/or Clarifications During The Conference. If There Are Still Questions Or In Need Of Clarifications After The Time Limit, The Representative May Submit A Letter Addressed To The Bac Chairperson. The Bac Shall Issue A Supplemental Bid Bulletin To Address The Issues And Concerns. Iii. Bid Submission 1. Bidders Shall Submit Their Bids Proposal At Room 1, Afu, 3rd Floor Lynjun Alegre-sardido Besjc Bldg., Ecoland Ii, Davao City Or Via Email At Owwadavao11@gmail.com Or Owwadavaoprocurement@gmail.com Before The Closing Date And Time. For Electronic Submission The Supplier Shall Comply With The Following Requirements: O Use A Two-factor Security Procedure Consisting Of An Archive Format Compression (winrar Or Winzip) And Password Protection To Ensure The Security, Integrity And Confidentiality Of The Bids Submitted; And O Allows Access To A Password-protected Bidding Documents On Opening Date And Time. The Passwords For Accessing The File Will Be Disclosed By The Bidders Only During The Actual Bid Opening Which May Be Done In Person Or Face-to-face Through Videoconferencing, Webcasting Or Similar Technology; 2. Bidders Shall Submit Their Bids Manually, Postal Mail Or Electronic Submission Through Their Duly Authorized Representative Using The Forms Specified In The Bidding Documents In Two (2) Password-protected Bidding Documents In Compressed Archive Folders, And Which Shall Be Submitted Simultaneously. The First Shall Contain The Technical Component Of The Bid, Including The Eligibility Requirements As Specified In The Bidding Documents, And The Second Shall Contain The Financial Component Of The Bid. Likewise, The Authorized Representative Shall Submit An Affidavit Attesting That The Submitted Electronic Documents, Electronic Messages, And Electronic Signatures Are Authentic. Format Of Bid Submission:  Technical Component Folder - Password Protected  Financial Component Folder – Password Protected Note:  The Technical Component Folder And Financial Component Folder Shall Contain All The Required Documents As Specified In The Checklist Of Technical And Financial Documents As Indicated In The Bidding Documents. 3. Bidding Documents Not In Compressed Archive Folders And Are Not Password Protected, Shall Be Rejected. However, Bid Not Properly Compressed And Password-protected, As Required In The Bidding Documents, Shall Be Accepted, Provided That The Bidder Or Its Duly Authorized Representative Shall Acknowledge Such Condition Of The Bid As Submitted. The Bac Shall Assume No Responsibility For The Improperly Compressed Or Password-protected Folder, Or For Its Premature Opening. 4. Upon Receipt Of The First And Second Envelopes, Bac Secretariat Shall Generate A Bid Receipt Page For The Official Time Of Submission Which Can Be Saved Or Printed By The Bidder. 5. Bidders May Modify Or Withdraw Their Bid At Any Time Before The Deadline For The Submission And Receipt Of Bids. Bidders Shall Not Be Allowed To Retrieve Its Original Bid, But Shall Only Be Allowed To Send Another Bid Equally Secured, Properly Identified, And Labelled As A “modification” Of The One Previously Submitted. The Time Indicated In The Latest Bid Receipt Page Generated Shall Be The Official Time Of Submission. 6. Bids Submitted After The Deadline Shall Not Be Accepted. Iv. Eligibility Check And Bid Opening Via Zoom 1. The Bac Shall Open The Submitted Bids After The Scheduled Deadline During The Hybrid Conference And/or Via Zoom Meeting. 2. Only Those Who Paid The Corresponding Fee And Submitted Their Bid Before The Deadline Shall Be Provided With The Details And Link To Be Used During The Meeting. 3. Only One (1) Authorized Representative Of The Company Shall Be Allowed To Participate In The Meeting; 4. The Passwords For Accessing The Bidding Documents Shall Be Disclosed By The Bidders Only During The Actual Bid Opening For Electronic Documents. V. Submission Of Original Bid Documents For Electronic Submission. The Bac Shall Notify The Lowest/single Calculated Bidder And Request For The Submission Of Original Bid Documents For Post Qualification And Evaluation. Vi. Tie-breaking Method In Case Of Two Or More Bidders Are Determined And Declared As The Lowest Calculated Responsive Bidder (lcrb), Using The Dicing Method With The Following Mechanics: 1. Based On The Time Sequence Of Bid Submission Of Eligible Bidders, The Bac Chair Or Representative Shall Roll The Dice In A Designated Container, In Favour Of The First Bidder Or Bidder A, Bidder B And So On. 2. For Each Bidder, The Bac Chair Or Representative Shall Roll The Dice Three (3) Times And The Total Points Shall Be The Sum Of The Dots To Make The Final Score. 3. The Determination Of The Winner Shall Be Based On The Highest Points Earned In The Final Score. 4. In Case Of Another Tie, The Bac Chair Or Representative Shall Repeat The Method Of Tie Breaking Until A Winner Is Declared. For Guidance And Information Of All Concerned. Mayette A. Almano Bac Chairperson Format For Bid Submission Thru Email Project Title: Bidding For The Supply And Delivery Of Motor Vehicle (brand New 2024 Model Of Passenger Van) Identification No.: Pb-10-2024 Submitted By: _______________________ (printed Name And Designation) Authorized Representative _______________________ Name Of Company _______________________ Company Address _______________________ Contact Nos. _______________________ Fax No. [attached Two (2) Password-protected Bidding Documents In Compressed Archive Folders, And Which Shall Be Submitted Simultaneously. The First Shall Contain The Technical Component Of The Bid, Including The Eligibility Requirements As Specified In The Bidding Documents, And The Second Shall Contain The Financial Component Of The Bid.] Bidding Forms 1. Bid Form 2. Contract Agreement Form 3. Omnibus Sworn Statement 4. Bid Securing Declaration Form 5. Statement Of All Ongoing Gov’t & Private Contracts 6. Statement Of Slcc In Gov’t & Private Contracts Completed 7. Price Schedule Appendix “1” Bid Form For The Procurement Of Goods [shall Be Submitted With The Bid] _________________________________________________________________________ Bid Form Date : _________________ Project Identification No. : _________________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To [supply/deliver/perform] [description Of The Goods] In Conformity With The Said Pbds For The Sum Of [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein Or In The Price Schedules, If Our Bid Is Accepted, We Undertake: A. To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents (pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Period Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. [insert This Paragraph If Foreign-assisted Project With The Development Partner: Commissions Or Gratuities, If Any, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Amount And Purpose Of Of Agent Currency Commission Or Gratuity ________________________________________________ ________________________________________________ ________________________________________________ (if None, State “none”) ] Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of [name Of The Bidder] As Evidenced By The Attached [state The Written Authority]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: ___________________________________________________________________ Legal Capacity: _____________________________________________________________ Signature: ________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: __________________________________ Date: ___________________ Contract Agreement Form For The Procurement Of Goods (revised) [not Required To Be Submitted With The Bid, But It Shall Be Submitted Within Ten (10) Days After Receiving The Notice Of Award] _________________________________________________________________________ Contract Agreement This Agreement Made The _____ Day Of __________ 20_____ Between [name Of Procuring Entity] Of The Philippines (hereinafter Called “the Entity”) Of The One Part And [name Of Supplier] Of [city And Country Of Supplier] (hereinafter Called “the Supplier”) Of The Other Part; Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly [brief Description Of Goods And Services] And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of [contract Price In Words And Figures In Specified Currency] (hereinafter Called “the Contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Integral Part Of This Agreement, Viz.: I. Philippine Bidding Documents (pbds); I. Schedule Of Requirements; Ii. Technical Specifications; Iii. General And Special Conditions Of Contract; And Iv. Supplemental Or Bid Bulletins, If Any Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted (e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; Performance Security; Notice Of Award Of Contract; And The Bidder’s Conforme Thereto; And Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders, And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures] Or Such Other Sums As May Be Ascertained, [named Of The Bidder] Agrees To [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] Agrees To Pay The Above-mentioned Sum In Accordance With The Terms Of The Bidding. In Witness Whereof The Parties Hereto Have Caused This Agreement To Be Executed In Accordance With The Laws Of The Republic Of The Philippines On The Day And Year First Above Written. [insert Name And Signature] [insert Signatory’s Legal Capacity] For: [insert Procuring Entity] [insert Name And Signature] [insert Signatory’s Legal Capacity] For: [insert Name Of Supplier] Acknowledgment [format Shall Be Based On The Latest Rules On Notarial Practice] Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Bid Securing Declaration Form [shall Be Submitted With The Bid If Bidder Opts To Provide This Form Of Bid Security] _________________________________________________________________________ Republic Of The Philippines) City Of _______________________) S.s. Bid Securing Declaration Project Identification No.: [insert Number] To: [insert Name And Address Of The Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Statement Of All Ongoing Gov’t & Private Contracts Statement Of All Ongoing Government & Private Contracts Including Contracts Awarded But Not Yet Started Business Name : ___________________________________________________ Business Address : ___________________________________________________ Name Of Contract/ Project Cost A. Owner’s Name B. Address C. Telephone Nos. Nature Of Work Bidder’s Role A. Date Awarded B. Date Started C. Date Of Completion % Of Accomplishment Value Of Outstanding Works / Undelivered Portion Description % Planned Actual Government Private Note: This Statement Shall Be Supported With: Total Cost Notice Of Award And/or Notice To Proceed / Letter Of Confirmation Or Similar Documents (signed By The Owner Or Authorized Representative) In Terms Of Contract Price The “undelivered Portion” Column Pertains To The Contract Balance. Submitted By : ___________________________________________________ (printed Name & Signature) Designation : ___________________________________________________ Date : ___________________________________________________ Statement Of Slcc In Gov’t & Private Contracts Completed Statement Of Slcc In Government & Private Contracts Completed Which Are Similar In Nature Business Name : ___________________________________________________ Business Address : ___________________________________________________ Name Of Contract A. Owner’s Name B. Address C. Telephone Nos. Nature Of Work Bidder’s Role A. Amount At Award B. Amount At Completion C. Duration A. Date Awarded B. Contract Effectivity C. Date Completed Description % Government Private Note: This Statement Shall Be Supported With: 1. Contract 2. Certificate Of Completion 3. Certificate Of Acceptance Submitted By : ___________________________________________________ (printed Name & Signature) Designation : ___________________________________________________ Date : ___________________________________________________ Price Schedule For Goods Offered From Within The Philippines [shall Be Submitted With The Bid If Bidder Is Offering Goods From Within The Philippines] ______________________________________________________________________________ For Goods Offered From Within The Philippines Name Of Bidder ________________________ Project Id No._________ Page ___of___ 1 2 3 4 5 6 7 8 9 10 Item Description Country Of Origin Quantity Unit Price Exw Per Item Transportation And All Other Costs Incidental To Delivery, Per Item Sales And Other Taxes Payable If Contract Is Awarded, Per Item Cost Of Incidental Services, If Applicable, Per Item Total Price, Per Unit (col 5+6+7+8) Total Price Delivered Final Destination (col 9) X (col 4) Name: ___________________________________________________________________ Legal Capacity: ____________________________________________________________ Signature: ________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: __________________________________

Details: Hansel Ltd’s aim is to establish a dynamic purchasing system, which is targeted at the User Services of the premises and the provision of complementary or separate supplementary services as defined by the Customer in the performance plug-in Terms and Conditions for Customers in the Customer’s Accounts or Defined by the Customer”, “The user services of the premises may be tailored to the operating environment only as a result of the Sharing Services” Cleaning services and Services Assistant Tasks.", "Cleaning Services Contain: ""; Maintenance and Basic Cleanings"; Separate Order Additional Services" The acquisjen and distribution of goods and services associated with the cleaning task (such as the acquista of sanitary supplies and dishwasher materials) Separately subscribed Maintenance and Fundamental Services, such as Custody Services Caused by Orders » » • Procurement and/or Pro Lisä Supplementary Services, such as Exchange Service, Customer’s Own Own carpet maintenance service, Transportation of Collection Paper to Waste Collection Point, Proning of Data Protection Maäls and Disposing of Requirements Inher, Wheel Services Services » “Security services may be Mm. ”; Aula, Reception, Office Support and Guardian Services”; “Safety and Awakening Services”; “Supporting of Safety and Awakening”; “Local or Circulating Guards”; “Safetytarkastus”; “Safety Checks”; “Asssistant Doctors Can Be Mm

Details: Description Republic Of The Philippines Province Of Occidental Mindoro Municipality Of Abra De Ilog Invitation To Bid Construction Of Retaining Wall 1. The Local Government Unit Of Abra De Ilog, Occidental Mindoro Through The 20% Development Fund Intends To Apply The Sum Of Three Million Six Hundred Thousand Pesos Only. (p 3,600,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Construction Of Retaining Wall Infra # 03-2024 For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Abra De Ilog, Occidental Mindoro Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 80 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From October 30, 2024 To November 26, 2024; 8:00 Am To 5:00 Pm Procuring Entity And Inspect The Bidding Documents At Bac Office Local Government Unit Of Abra De Ilog, Occ. Mindoro. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 30, 2024 To November 26, 2024; 8:00 Am – 5:00 Pm During Weekdays Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only ( Php 5,000.00) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees On Or Before The Opening Of Bid. 6. The Local Government Unit Of Abra De Ilog Will Hold A Pre-bid Conference On November 8, 2024; 2:30 Pm At Bac Office, Municipal Building, Lgu Abra De Ilog, Occ. Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac Office, Municipal Building Lgu, Abra De Ilog, Occ. Mindoro. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 26, 2024; 2:30 Pm At Bac Office, Municipal Building, Lgu Abra De Ilog, Occ. Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Abra De Ilog Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Adriel S. Dacara Municipal Engineer Office Of The Municipal Engineer Abra De Ilog, Occ. Mindoro 0939-925-5745 Asdhteb@gmail.com Linda B. Ramos Municipal Budget Officer Bac Chairperson Bac Office Municipal Building Barangay Poblacion, Abra De Ilog, Occ. Mindoro Baclguabradeilog@yahoo.com Cp# 0908-888-7026 September 30, 2024 Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Abra De Ilog, Occ. Mindoro Invites Bids For The Construction Of Retaining Wall, With Project Identification Number Infra No 03-2024. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Construction Of Retaining Wall In The Amount Of Three Million Six Hundred Thousand Pesos Only (p 3,600,000.00) 2.2. The Source Of Funding Is: A. 20% Development Fund 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.1. Subcontracting Of Any Portion Of The Project Does Not Relieve The Contractor Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On November 8, 2024; 2:30 Pm At Bac Office, Municipal Building, Lgu Abra De Ilog, Occ. Mindoro. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until [indicate Date]. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Notes On The Bid Data Sheet (bds) The Bid Data Sheet (bds) Consists Of Provisions That Supplement, Amend, Or Specify In Detail, Information, Or Requirements Included In The Itb Found In Section Ii, Which Are Specific To Each Procurement. This Section Is Intended To Assist The Procuring Entity In Providing The Specific Information In Relation To Corresponding Clauses In The Itb And Has To Be Prepared For Each Specific Procurement. The Procuring Entity Should Specify In The Bds Information And Requirements Specific To The Circumstances Of The Procuring Entity, The Processing Of The Procurement, And The Bid Evaluation Criteria That Will Apply To The Bids. In Preparing The Bds, The Following Aspects Should Be Checked: A. Information That Specifies And Complements Provisions Of The Itb Must Be Incorporated. B. Amendments And/or Supplements, If Any, To Provisions Of The Itb As Necessitated By The Circumstances Of The Specific Procurement, Must Also Be Incorporated. Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Removal Of Structure & Obstraction, Excavation For Structures, Embankment, Steel Works, Structural Concrete – Class A, Cement Plastering, Formworks & Falseworks, Metal Structures, Asbc & Pccp. 7.1 [specify The Portions Of Works And The Maximum Percentage Allowed To Be Subcontracted, Which Shall Not Be Significant Or Material Components Of The Project As Determined By The Procuring Entity.] 10.3 Sub-contracting Not Allowed 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel General Experience Relevant Experience Project Engineer General Engineer Road Construction Foreman General Construction Road Construction 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Road Grader 80.4 Hp/6710a 1 Road Roller 10 Mt 1 Water Truck 1000 Gal 1 One Bagger Mixer 5hp 1 Concrete Vibrator Blade 14 Inch/7.5 Hp 1 Concrete Saw Blade 12 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than P 100,000.00 (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than P 250,000.00 (5%) Of Abc] If Bid Security Is In Surety Bond. 19.2 20 21 Additional Contract Documents Relevant To The Project That May Be Required By Existing Laws And/or The Procuring Entity, Such As Construction Schedule And S-curve, Manpower Schedule, Construction Methods, Equipment Utilization Schedule, Construction Safety And Health Program Approved By The Dole, And Other Acceptable Tools Of Project Scheduling. Section Iv. General Conditions Of Contract Notes On The General Conditions Of Contract The General Conditions Of Contract (gcc) In This Section, Read In Conjunction With The Special Conditions Of Contract In Section V And Other Documents Listed Therein, Should Be A Complete Document Expressing All The Rights And Obligations Of The Parties. Matters Governing Performance Of The Contractor, Payments Under The Contract, Or Matters Affecting The Risks, Rights, And Obligations Of The Parties Under The Contract Are Included In The Gcc And Special Conditions Of Contract. Any Complementary Information, Which May Be Needed, Shall Be Introduced Only Through The Special Conditions Of Contract. 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 4.1. The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 4.2. If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property(ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Notes On The Special Conditions Of Contract Similar To The Bds, The Clauses In This Section Are Intended To Assist The Procuring Entity In Providing Contract-specific Information In Relation To Corresponding Clauses In The Gcc Found In Section Iv. The Special Conditions Of Contract (scc) Complement The Gcc, Specifying Contractual Requirements Linked To The Special Circumstances Of The Procuring Entity, The Procuring Entity’s Country, The Sector, And The Works Procured. In Preparing This Section, The Following Aspects Should Be Checked: A. Information That Complements Provisions Of The Gcc Must Be Incorporated. B. Amendments And/or Supplements To Provisions Of The Gcc As Necessitated By The Circumstances Of The Specific Purchase, Must Also Be Incorporated. However, No Special Condition Which Defeats Or Negates The General Intent And Purpose Of The Provisions Of The Gcc Should Be Incorporated Herein. Special Conditions Of Contract Gcc Clause 2 Not Applicable 4.1 6 The Site Investigation Reports Are: [list Here The Required Site Investigation Reports.] Not Applicable 7.2 [select One, Delete The Other.] Five (5) Years. 10 [select One, Delete The Other:] A. Dayworks Are Applicable At The Rate Shown In The Contractor’s Original Bid. 120 Calendar Days 11.1 The Contractor Shall Submit The Program Of Work To The Procuring Entity’s Representative Within 10 Days Of Delivery Of The Notice Of Award. 11.2 The Amount To Be Withheld For Late Submission Of An Updated Program Of Work Is 1% Of The Total Contract Price. 13 The Amount Of The Advance Payment Is 15% Of The Total Contract Price 14 Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Be Excluded For Payment. Not Applicable 15.1 The Date By Which Operating And Maintenance Manuals Are Required Is Before Final Inspection. (november 24, 2023) The Date By Which “as Built” Drawings Are Required Is Before Final Inspection. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is 1% Of The Total Contract Price Section Vi. Specifications Notes On Specifications A Set Of Precise And Clear Specifications Is A Prerequisite For Bidders To Respond Realistically And Competitively To The Requirements Of The Procuring Entity Without Qualifying Or Conditioning Their Bids. In The Context Of International Competitive Bidding, The Specifications Must Be Drafted To Permit The Widest Possible Competition And, At The Same Time, Present A Clear Statement Of The Required Standards Of Workmanship, Materials, And Performance Of The Goods And Services To Be Procured. Only If This Is Done Will The Objectives Of Economy, Efficiency, And Fairness In Procurement Be Realized, Responsiveness Of Bids Be Ensured, And The Subsequent Task Of Bid Evaluation Facilitated. The Specifications Should Require That All Goods And Materials To Be Incorporated In The Works Be New, Unused, Of The Most Recent Or Current Models, And Incorporate All Recent Improvements In Design And Materials Unless Provided Otherwise In The Contract. Samples Of Specifications From Previous Similar Projects Are Useful In This Respect. The Use Of Metric Units Is Mandatory. Most Specifications Are Normally Written Specially By The Procuring Entity Or Its Representative To Suit The Works At Hand. There Is No Standard Set Of Specifications For Universal Application In All Sectors In All Regions, But There Are Established Principles And Practices, Which Are Reflected In These Pbds. There Are Considerable Advantages In Standardizing General Specifications For Repetitive Works In Recognized Public Sectors, Such As Highways, Ports, Railways, Urban Housing, Irrigation, And Water Supply, In The Same Country Or Region Where Similar Conditions Prevail. The General Specifications Should Cover All Classes Of Workmanship, Materials, And Equipment Commonly Involved In Construction, Although Not Necessarily To Be Used In A Particular Works Contract. Deletions Or Addenda Should Then Adapt The General Specifications To The Particular Works. Care Must Be Taken In Drafting Specifications To Ensure That They Are Not Restrictive. In The Specification Of Standards For Goods, Materials, And Workmanship, Recognized International Standards Should Be Used As Much As Possible. Where Other Particular Standards Are Used, Whether National Standards Or Other Standards, The Specifications Should State That Goods, Materials, And Workmanship That Meet Other Authoritative Standards, And Which Ensure Substantially Equal Or Higher Quality Than The Standards Mentioned, Will Also Be Acceptable. The Following Clause May Be Inserted In The Scc. Sample Clause: Equivalency Of Standards And Codes Wherever Reference Is Made In The Contract To Specific Standards And Codes To Be Met By The Goods And Materials To Be Furnished, And Work Performed Or Tested, The Provisions Of The Latest Current Edition Or Revision Of The Relevant Standards And Codes In Effect Shall Apply, Unless Otherwise Expressly Stated In The Contract. Where Such Standards And Codes Are National, Or Relate To A Particular Country Or Region, Other Authoritative Standards That Ensure A Substantially Equal Or Higher Quality Than The Standards And Codes Specified Will Be Accepted Subject To The Procuring Entity’s Representative’s Prior Review And Written Consent. Differences Between The Standards Specified And The Proposed Alternative Standards Shall Be Fully Described In Writing By The Contractor And Submitted To The Procuring Entity’s Representative At Least Twenty-eight (28) Days Prior To The Date When The Contractor Desires The Procuring Entity’s Representative’s Consent. In The Event The Procuring Entity’s Representative Determines That Such Proposed Deviations Do Not Ensure Substantially Equal Or Higher Quality, The Contractor Shall Comply With The Standards Specified In The Documents. These Notes Are Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Should Not Be Included In The Final Bidding Documents. Section Vii. Drawings Annex Bid In To Separate Folder Section Viii. Bill Of Quantities Notes On The Bill Of Quantities Objectives The Objectives Of The Bill Of Quantities Are: A. To Provide Sufficient Information On The Quantities Of Works To Be Performed To Enable Bids To Be Prepared Efficiently And Accurately; And B. When A Contract Has Been Entered Into, To Provide A Priced Bill Of Quantities For Use In The Periodic Valuation Of Works Executed. In Order To Attain These Objectives, Works Should Be Itemized In The Bill Of Quantities In Sufficient Detail To Distinguish Between The Different Classes Of Works, Or Between Works Of The Same Nature Carried Out In Different Locations Or In Other Circumstances Which May Give Rise To Different Considerations Of Cost. Consistent With These Requirements, The Layout And Content Of The Bill Of Quantities Should Be As Simple And Brief As Possible. Daywork Schedule A Daywork Schedule Should Be Included Only If The Probability Of Unforeseen Work, Outside The Items Included In The Bill Of Quantities, Is High. To Facilitate Checking By The Entity Of The Realism Of Rates Quoted By The Bidders, The Daywork Schedule Should Normally Comprise The Following: A. A List Of The Various Classes Of Labor, Materials, And Constructional Plant For Which Basic Daywork Rates Or Prices Are To Be Inserted By The Bidder, Together With A Statement Of The Conditions Under Which The Contractor Will Be Paid For Work Executed On A Daywork Basis. B. Nominal Quantities For Each Item Of Daywork, To Be Priced By Each Bidder At Daywork Rates As Bid. The Rate To Be Entered By The Bidder Against Each Basic Daywork Item Should Include The Contractor’s Profit, Overheads, Supervision, And Other Charges. Provisional Sums A General Provision For Physical Contingencies (quantity Overruns) May Be Made By Including A Provisional Sum In The Summary Bill Of Quantities. Similarly, A Contingency Allowance For Possible Price Increases Should Be Provided As A Provisional Sum In The Summary Bill Of Quantities. The Inclusion Of Such Provisional Sums Often Facilitates Budgetary Approval By Avoiding The Need To Request Periodic Supplementary Approvals As The Future Need Arises. Where Such Provisional Sums Or Contingency Allowances Are Used, The Scc Should State The Manner In Which They Will Be Used, And Under Whose Authority (usually The Procuring Entity’s Representative’s). The Estimated Cost Of Specialized Work To Be Carried Out, Or Of Special Goods To Be Supplied, By Other Contractors Should Be Indicated In The Relevant Part Of The Bill Of Quantities As A Particular Provisional Sum With An Appropriate Brief Description. A Separate Procurement Procedure Is Normally Carried Out By The Procuring Entity To Select Such Specialized Contractors. To Provide An Element Of Competition Among The Bidders In Respect Of Any Facilities, Amenities, Attendance, Etc., To Be Provided By The Successful Bidder As Prime Contractor For The Use And Convenience Of The Specialist Contractors, Each Related Provisional Sum Should Be Followed By An Item In The Bill Of Quantities Inviting The Bidder To Quote A Sum For Such Amenities, Facilities, Attendance, Etc. Signature Box A Signature Box Shall Be Added At The Bottom Of Each Page Of The Bill Of Quantities Where The Authorized Representative Of The Bidder Shall Affix His Signature. Failure Of The Authorized Representative To Sign Each And Every Page Of The Bill Of Quantities Shall Be A Cause For Rejection Of His Bid. These Notes For Preparing A Bill Of Quantities Are Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Should Not Be Included In The Final Documents. Section Ix. Checklist Of Technical And Financial Documents Notes On The Checklist Of Technical And Financial Documents The Prescribed Documents In The Checklist Are Mandatory To Be Submitted In The Bid, But Shall Be Subject To The Following: A. Gppb Resolution No. 09-2020 On The Efficient Procurement Measures During A State Of Calamity Or Other Similar Issuances That Shall Allow The Use Of Alternate Documents In Lieu Of The Mandated Requirements; Or B. Any Subsequent Gppb Issuances Adjusting The Documentary Requirements After The Effectivity Of The Adoption Of The Pbds. The Bac Shall Be Checking The Submitted Documents Of Each Bidder Against This Checklist To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion Pursuant To Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages); Or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document; And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (e) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (f) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (g) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ (h) Philippine Contractors Accreditation Board (pcab) License; Or Special Pcab License In Case Of Joint Ventures; And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ (i) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And (j) Project Requirements, Which Shall Include The Following: ⬜ A. Organizational Chart For The Contract To Be Bid; ⬜ B. List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; ⬜ C. List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ (k) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (l) The Prospective Bidder’s Audited Financial Statements, Showing, Among Others, The Prospective Bidder’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (m) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc). Class “b” Documents ⬜ (n) If Applicable, Duly Signed Joint Venture Agreement (jva) In Accordance With Ra No. 4566 And Its Irr In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (o) Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ (p) Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ (q) Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ (r) Cash Flow By Quarter.

Details: Description To: All Prospective Proponents 1. The Department Of Education, Through Its Bids And Awards Committee (bac) Iv, Requests Price Quotation For The Project Supply And Delivery Of Automotive Tools With A Total Approved Budget For The Contract (abc) Of Philippine Pesos Three Hundred Four Thousand Five Hundred Six And 01/100 (php304,506.01). Lot Description Qty. Unit Price Ceiling (php) Total Price Ceiling (php) 1 Scan Tool / Intelligent Tester 1 Set 74,506.67 74,506.67 2 Coil Spring Compressor (portable) 3 Pcs 2,199.67 6,599.00 3 Air Compressor 1 Unit 154,064.33 223,400.34 Impact Wrench (hydraulic) 2 Pcs Portable Impact Wrench 1 Pc Floor Jack (crocodile Type) 5 Tons 2 Pcs Floor Jack (crocodile Type) 3 Tons 2 Pcs Jack Stands 3 Pairs Socket Wrench 2 Set Combination Wrench 3 Set Screwdriver 3 Set Allen Wrench (t-handle) 2 Set Torque Wrench 3 Set Mechanical Pliers 3 Set Circlip /snap Ring Plier Set 2 Set Electricians Tool Kit Set 3 Set Impact Deep Socket Wrench Set 3 Set Description And Details Of The Project Are Provided In The Project Reference, Hereto Attached As Appendix “a”. 2. Said Quotation Shall Be Received On Or Before 10:00 A.m. On November 04, 2024 By Courier Or By Hand-delivery At The Address Given Below: Bids And Awards Committee Iv Rm. M-512, 5th Floor, Mabini Bldg. Deped Complex, Meralco Avenue, Pasig City, Philippines Depedcentral.bacsecretariat@deped.gov.ph 3. The Successful Proponent Must Be Able To Meet The Following Requirements: 3.1. The Terms And Conditions Provided As Item V Of The Project Reference As May Be Applicable, As Well As The Provisions Of The Irr Of R.a. 9184 Are Deemed To Be Read Into This Project. 3.2. The Schedule Of Requirements, As Indicated In Item Vi Of The Project Reference; And 3.3. The Technical Specifications Which Lists The Details Of The Requirements As Indicated In Item Vii Of The Project Reference. Supplier’s Business Name: Tin: Address: Telephone No.: Fax No.: E-mail: Authorized Representative’s Signature Over Printed Name And Designation: Date: 4. The Proponent Is Required To Submit A Financial Proposal Indicating Its Price For The Required Lot. The Approved Budget For The Contract Philippine Pesos Three Hundred Four Thousand Five Hundred Six And 01/100 (php304,506.01). For Purposes Of The Evaluation, Comparison And Ranking Of Bids/offers, The Proponent Who Submitted The Single / Lowest Calculated Responsive Quotation Shall Be Awarded The Contract After Evaluation By The Bids And Awards Committee (bac) Iv. 5. The Quotation Shall Be Enclosed In A Sealed Envelope And Addressed To The Bac Secretariat At The Address Given Above. The Envelope Should Have The Rfq Number Boldly And Conspicuously Identified. 5.1. It Is The Exclusive Responsibility Of The Proponent To Ensure That The Sealed Envelope Containing The Quotation Reaches The Above Address Before The Time And Date Indicated In Item No. 2. If Being Delivered By Hand, The Quotation Must Be Delivered At The Above Address During Official Working Hours. Delivery To Any Other Person Or Office Will Be At The Risk Of The Proponent And Will Not Constitute Timely Delivery. Quotations Received After The Aforementioned Closing Time Or Deadline May Be Rejected. 5.2. Based On The Above-stated Provisions, The Proponent's Quotation Sent By Email Will Not Be Accepted And Will Be Considered As Rejected. 6. The Quotation Should Be Valid For Thirty (30) Calendar Days From The Due Date Indicated Above. 7. Deped Reserves The Right To Request Any Additional Information That It Deems Necessary In Order To Make Any Decision On Any Quotation. 8. Any Quotation Not Supported By The Information Requested In This Rfq Or Requested During Evaluation, Or Is Patently Non-complying With The Rfq Requirements May Not Be Considered. 9. Deped Reserves The Right To Accept Or Reject Any Quotation, To Annul The Procurement Process, Or Not To Award The Contract Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. Submission Of Quotation In Response To This Request Shall Be Construed As Commitment To Undertake The Services In Accordance With The Terms And Conditions, Specifications, And Schedule Of Implementation Set Forth In This Rfq. Asec. Malcolm S. Garma Bac Iv Chairperson Received Copy: ___________________________________________________ Remarks: _______________________ Project Reference I. Project Title: Supply And Delivery Of Automotive Tools Ii. Project Owner: Department Of Education – Administrative Service – General Services Division (as-gsd) Iii. Objective: To Procure The Project Supply And Delivery Of Automotive Tools The Most Effective And Prompt Manner, Primarily Considering Time And Resource Constraints. Iv. Eligibility, Technical And Financial Requirements/ Documents: The Proponent With The Single / Lowest Calculated Quotation (scq Or Lcq) Shall Submit The Requirements Indicated Below Within Five (5) Calendar Days From Receipt Of Notice From The Bac, Which Documents Shall Be Validated To Determine If The Proponent Is Technically, Legally And Financially Capable Prior To The Award: (i) Mayor’s Permit Issued By The City Or Municipality Where The Principal Place Of Business Is Located; (ii) Philgeps Registration Number; (iii) Duly Notarized Omnibus Sworn Statement (see Attached Annex “a”) • If A Partnership, Corporation, Cooperative, Or Joint Venture, Please Provide Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate As Stated In Item No. 2 Of The Attached Omnibus Sworn Statement); (iv) Income Tax Returns (annual Income Tax Returns Of The Preceding Tax Year); (v) Business Tax Returns (value Added Tax Or Percentage Tax Returns Covering The Previous Six Months); In Addition, The Supplier With The Scb Or Lcb Shall Submit The Samples Indicated Below Within Five (5) Calendar Days From Receipt Of Notice From The Bac. (i) One (1) Sample Each Of 17 Items Shall Be Provided By The Winning Supplier During Post-qualification. To Facilitate Post-qualification, The Proponent At Its Option May Submit In Advance, I.e., Together With Its Quotation, The Above Requirements And Other Documents As May Be Required. Non-submission Of Any Of The Documents Shall Be A Ground For Post-disqualification. In The Case Of A Joint Venture, Or If The Parties Intend To Enter Into A Joint Venture, The Requirements Are As Indicated In The Revised Implementing Rules And Regulations Of Republic Act No. 9184. V. Terms And Conditions Of Contract: A. Instructions 1. The Proponent Shall Be Responsible For Sourcing Its Goods/equipment, And Shall Make The Deliveries In Accordance With The Schedule, And Specifications Of The Award. Failure Of The Proponent To Comply With This Provision Shall Be Ground For Cancellation Of The Award Issued To The Proponent. 2. The Proponent Shall Pick-up The Contract Or Purchase Order (po), And Notice To Proceed (ntp) Issued In Its Favor Within Three (3) Calendar Days From The Date Of Receipt Of Notice To That Effect. A Fax Transmission Or Electronic Mail Shall Constitute An Official Notice To The Proponent. Thereafter, If The Contract Or Po Remains Unclaimed, The Contract Or Po Shall Be Cancelled. To Avoid Delay In The Delivery Of The Requesting Agency’s Requirements, All Defaulting Proponent Shall Be Precluded From Proposing Or Submitting Substitute Quotation(s) Or Item(s). 3. The Proponent Who Accepted A Contract Or Po, And Ntp But Failed To Deliver The Required Goods Within The Time Called For In The Contract Or Po Shall Be Disqualified From Participating In Deped Or Any Of Deped Units’ Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under R.a. 9184 And Its Revised Irr Against The Proponent. 4. Rejected Deliveries Shall Be Construed As Non-delivery, And Shall Be Replaced By The Proponent Subject To Liquidated Damages For Delayed Deliveries. 5. All Duties, Excise, And Other Taxes And Revenue Charges Shall Be Paid By The Proponent. 6. All Transactions Are Subject To Applicable Withholding Taxes Per Relevant Revenue Regulations Of The Bureau Of Internal Revenue (bir) Withholding Of Credible Value Added Tax And/or Expanded Value Added Tax Per Revenue Regulation(s) Of The Bir. B. Delivery And Documents The Goods Shall Be Delivered At Deped Complex, Meralco Ave., Pasig City. Risk And Title To The Goods Will Pass From The Proponent To Deped Upon Receipt And Final Acceptance Of The Goods At Their Final Destination. The Goods Must Conform To And Comply With The Standards Mentioned In The Schedule Of Requirements, As Indicated In Annex “b” And Technical Specifications As Indicated In Annex “c”. Upon Delivery Of The Goods To The Delivery Site, The Proponent Shall Notify Deped Through As-gsd And Present The Following Documents: I. Original And 4 Copies Of The Proponent’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; Ii. Original And Four Copies Of The Proponent‘s Warranty Certificate, Where Applicable; Iii. Original (white Copy) And Scanned Copy Stored In Cd/dvd/flash Drive Of The Pre-numbered Inspection And Acceptance Report (iar) And Delivery Receipt (dr) Detailing The Number And Description Of Items Received And Duly Signed And Dated By The Authorized Receiving Personnel (arp). For This Purpose, The Deped’s Representative At The Project Site Shall Be Mr. Idan Ray D. Magbanua, And The Designated Inspectorate Team. Packaging As May Be Applicable For Goods To Be Delivered And As May Be Indicated In The Contract Or Po, The Proponent Shall Provide Such Packaging As Is Required To Prevent Damage Or Deterioration During Transit To Their Final Destination. The Packaging Shall Be Well Protected From Damage During Transport. It Should Be Reinforced With Impact-resistant Material And It Should Be Well-packed. Incidental Services The Proponent Shall Provide Orientation To The End-user On The Properly Use/handling Of The Supplied Goods. Transportation Transport Of The Goods Shall Be Arranged By The Proponent, And Related Costs Shall Be Included In The Contract/po Price. Deped Accepts No Liability For The Damage Of Goods During Transit. Risk And Title To The Goods Will Not Pass To Deped Until Its Receipt And Final Acceptance At The Final Destination, Through Its Authorized Receiving Personnel. C. Schedule Of Payment The Proponent May Submit A Request For Payment Based The Following: (i) Cumulative Quantities Of Items Delivered Based On The Schedule Of Deliveries And Other Relevant Terms And Conditions Of The Contract; (ii) Duly Signed Delivery Receipt(s); (iii) Inspection And Acceptance Report(s), Including Certification By The Proponent, As Approved By The Duly Authorized Deped Representative, That The Items Have Been Delivered And/or Properly Installed And Commissioned In Accordance With The Contract. Other Delivery Documents As May Be Subsequently Prescribed By Deped Shall Be Provided By The Proponent. One Hundred Percent (100%) Of The Contract/po Price Shall Be Paid To The Proponent Within 60 Calendar Days, Subject To Existing Government Disbursement Procedure, Upon Delivery And Acceptance Of Goods By The Duly Authorized Deped Representative, And Receipt Of The Billing Statement Of Account. (note: The Supplier Must Furnish A Copy Of The Above-mentioned Documents To The End-user [(as-gsd)] And The Contract Management Division Of The Procurement Management Service, Central Office.) Payments Shall Be Subject To The “warranty” Provision In The Form Of Either Retention Money In An Amount Equivalent To At Least 1% Of The Payment, Or A Special Bank Guarantee In The Amount Equal To At Least 1% Of The Contract Price Required In Section 62 Of Ra 9184 And Its Irr. Release Of The Retention Money Shall Be At The Expiration Of The Warranty Period, Or The Remaining Amount In Case It Has Been Utilized Pursuant To The Warranty Provision. D. Inspections Inspection Or Pre-delivery Inspection (pdi), Where Applicable For Goods To Be Delivered, Shall Be Conducted By Deped Through The Duly Designated Inspectorate Team. The Inspection Or Pdi Shall Be Made Upon Notice To The Deped Of The Readiness Of The Goods For Inspection. The Proponent Shall Coordinate With Deped, Through The Procurement Management Service-contract Management Division (procms-cmd), On The Conduct Of Inspection Or Pre-delivery Inspection (pdi). Any Request For Inspection Or Pdi Shall Be Done In Writing, And Contain The Following Information: A. Project Title And Contract/po Number; B. Specific Goods For Inspection; C. Quantity Of Goods For Inspection; D. Venue/address Of Inspection Site; And E. Proposed Schedule Of Inspection Which Must Be At Least Three (3) Calendar Days From The Submission Of The Request. The Request For Inspection Or Pdi Shall Be Addressed To Procms-cmd, And Must Be Submitted Through Email At Procms.cmd@deped.gov.ph. Prior To And For Purposes Of Inspection, The Proponent Shall Ensure Convenient Access To The Goods For Inspection. The Proponent Shall Assign Personnel To Undertake The Handling, Unpacking, Assembly, Commissioning, Dissassembly, Repacking, Resealing And Sorting Of The Goods Prior To, During And After The Inspection. Deped Shall Have The Right To Visit And Inspect The Proponent’s Premises Covered By The Contract/po, At Any Time Or Stage Of Contract Implementation, To Monitor And Assess The Proponent’s Capacity To Discharge Its Contractual Obligations. Goods With Defects Or Non-compliant With The Required Technical Specifications Upon Delivery Shall Be Rejected, Orally Or In Writing, By Deped And Replaced By The Proponent In Accordance With The Warranty Provision. The Replacement Goods For This Reason Shall Be Subject To Re-inspection. Goods Are Considered Defective When They Are Unfit For The Use For Which It Is Intended Or Its Fitness For Such Use Is Diminished To Such An Extent That, Had Deped Been Aware Thereof, It Would Not Have Acquired It Or Would Have Given A Lower Price For It. Defects In The Goods Can Either Be Patent Or Latent. A Patent Defect Is One That Is Apparent To The Buyer Or Normal Observation. It Is An Apparent Or Obvious Defect. On The Other Hand, A Latent Defect Is One That Is Not Apparent To The Buyer By Reasonable Observation. A Latent Defect Is Hidden Or One That Is Not Immediately Determinable. E. Warranty Six Months Comprehensive Warranty For The Goods Will Be Applied. The Said Warranty Period Shall Reckon From The Date Of Issuance Of The Certificate Of Final Acceptance By The Deped That The Delivered Goods Have Been Duly Inspected And Accepted (i.e. Final Acceptance). The Obligation For The Warranty Shall Be Covered By Special Bank Guarantee In The Amount Equivalent To One Percent (1%) Of The Total Contract Price. Replacement And/or Repair Of The Goods May Be Requested Within The Warranty Period. Replacement And/or Repair Shall Be Made Immediately Upon Claim Or Request Therefor. In Case The Proponent Opts For Retention Money, The Amount Shall Only Be Released After The Lapse Of The Entire Warranty Period, Unless During The Remainder Of The Warranty Period, The Retention Money Is Substituted With A Special Bank Guarantee As Prescribed Above. The Special Bank Guarantee Shall Not Contain Any Deletion, Crossing-out, Expunction, Or Any Form Of Correction. Otherwise, Deped May Reject Such Security If Any Such Intercalation, Superimposition Or Alteration Affects Any Materials Information Or Feature Of The Document. Vi. Schedule Of Requirements As Indicated In Annex ”b”. Vii. Technical Specifications As Indicated In Annex “c”. Viii. General Instructions To Suppliers 1. This Request For Quotation (rfq) Form Is Deped’s Standard Rfq To Be Used When Deped Solicits Quotations For The Procurement Of Goods And Services. It Is A Standard Template That Suppliers Must Follow In Order To Prepare And Submit Their Quotations For Consideration By Deped. 2. This Rfq Is Composed Of Three (3) Lots. Prospective Proponents Shall Submit Their Quote For Three (3) Lots. Quotation That Exceeds The Abc For The Said Lot Shall Be Rejected. 3. The Proponent Must Fill Up The Spaces With The Required And Correct Information Including The Offered Brand, Model, Make And Specifications, As Well As The Total Price Of The Item Or The Items In The Lot. They Shall Likewise Indicate The Total Price Of The Said Lot. 4. Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes, Duties And/or Levies To Be Paid And Other Incidental Costs To The Delivery Site/s If The Contract Is Awarded. 5. Award Of Contract Shall Be Made To The Single/lowest Quotation Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. The Rfq Form Must Be Duly Signed And Accomplished, Either Typewritten Or Written In Indelible Ink. Any Correction Made To The Prices, Rates Or To Any Information Shall Be Rewritten In Indelible Ink And Initialed By The Person Signing The Rfq Form. 6. The Proponent Shall Accomplish, Provide Correct And Accurate Information And Submit, Together With The Request For Quotation (rfq), The Following Attached Documents: (i) Schedule Of Requirements (annex “b”); (ii) Technical Specifications (annex “c”); And (iii) Financial Proposal (annex “d”) Otherwise, Non- Submission Of Which Shall Result To Automatic Disqualification Of Proposal. The Proponent Should Not Need To Fill Out The Attached Purchase Order (po) Under Annex "e". 7. The Proponent Requiring Any Clarifications Of The Request For Quotation Document May Refer To: Asec. Malcolm S. Garma Bids And Awards Committee Iv Department Of Education Room M-511, 5thfloor, Mabini Bldg., Deped Complex, Meralco Avenue, Pasig City Tel Nos. 8633-9343 / 8636-6542 Depedcentral.bacsecretariat@deped.gov.ph Look For: Ms. Mailyn B. Almodiel (project In Charge) Ix. Financial Proposal Quotation Form As Indicated In Annex “d”. Annex “a” Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] Republic Of The Philippines) City/municipality Of ____________________________________) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Its Association Or Relation With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End- User Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examine All Of The Bidding Documents; B. Acknowledge All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Made An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquire Or Secure Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of __________, 20____ At ______________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Rules On Notarial Practice] Annex “b” Schedule Of Requirements Supply And Delivery Of Automotive Tools Lot Description Quantity Delivery Period 1 Scan Tool / Intelligent Tester 1 Set Fifteen (15) Calendar Days’ Period Upon The Receipt Of Notice To Proceed 2 Coil Spring Compressor 3 Pcs 3 Air Compressor 1 Unit Impact Wrench Hydraulic 2 Pcs Impact Wrench Portable 1 Pc Floor Jack (3 Tons) 2 Pcs Floor Jack (5 Tons) 2 Pcs Jack Stands 3 Pairs Socket Wrench 2 Set Combination Wrench 3 Set Screwdriver Set 3 Set Set Of Allen Wrench (t-handle) 2 Set Adjustable Torque Wrench Handle 3 Pcs Mechanical Pliers 3 Set Circlip Pliers 2 Set Electricians Tool Kit Set 3 Set Impact Deep Socket Wrench Set 3 Set A. Delivery Schedule Complete Delivery Of The Goods Shall Be Made Within Fifteen (15) Calendar Days’ Period Upon The Receipt Of Notice To Proceed (ntp) B. Project Site Goods Shall Be Delivered To Administrative Service- General Service Divisions, Department Of Education, Deped Complex, Meralco Avenue, Pasig City. C. Delivery And Receiving Instructions The Supplier Shall Observe The Following Instructions: 1) Goods As Specified In This Schedule Of Requirements And/or Technical Specifications Shall Be Delivered Only To The Address Indicated Herein. 2) The Proponent Shall Notify The Indicated Authorized Receiving Personnel At The Project Site At The Scheduled Date Of Delivery At Least Three (3) Working Days In Advance And Shall Ensure That The Authorized Receiving Personnel Of The Deped Is Present During The Date And Time Of Delivery. 3) The Proponent Shall Make Delivery Or Deliveries To The Project Site On Regular Working Days, During Office Hours From 8:00 A.m. To 2:00 P.m. The Authorized Receiving Personnel Reserves The Right To Refuse To Receive/accept Delivered Goods Made Before 8:00 A.m. To 2:00 P.m., And On Non-working Days. 4) The Proponent Shall Coordinate With Deped Bureau Of Learning Resources – Office Of The Director For Purposes Of Inspection And Acceptance. 5) During The Delivery, Delivery Receipts Must Be Signed By Mr. Albert Alano, Chief Of Asset Management Division Or His Authorized Representative. D. Evaluation Of Quotations Quotations Shall Be Compared And Evaluated On The Basis Of The Following Criteria: 1) Completeness Of Submission 2) Compliance With Technical Specifications 3) Price-lowest Unit Cost Statement Of Compliance After Having Carefully Read And Accepted Your Request For Quotation And Its Terms And Conditions, I/we Quote You On The Item/s At Price Noted In The Rfq. The Quotation Shall Be Binding Upon Us For Thirty (30) Calendar Days Reckoned From Last Day Of Submission Indicated In The Submission Requirements. The Corresponding Award On Contract Shall Be Accepted By Us At Any Time Before Expiration Of This Period. The Deped- Bids And Awards Committee Iv Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. _____________________________________________________________________________ Name And Signature Of Provider’s Authorized Representative Annex “c” Technical Specifications General Requirements/specifications: To Provide The Necessary Supplies Automotive Tools For The Preventive Maintenance And Emergency Repair Of Service Vehicles Of The Department. Detailed Technical Specifications Lot Description Quantity Statement Of Compliance (state Comply Or Not Comply) Bidder’s Actual Offer 1 Scan Tool / Intelligent Tester Functional: To Interface With, Diagnose, And Reprogram Vehicle Control Modules. Performance: -retrieves Module Information From Body Chasis, Powertrain, Information & Communication -quickly Detect And Display Faults And Trouble Code. - Covers Domestic/ Asian / European Vehicle Manufactures. -the Unique Dedicated Services Section Includes All Reset, Epb, Abs/ Srs And Sas Services. -automatic System And Software Updates. Design: -atleast 8 Inch Full-color Led Screen Display. -atleast 1024x600 Resolution. Brand New 1 Set 2 Coil Spring Compressor Functional: Using On All Vehicles Equipped With Macpherson Struts To Rapidly Compress The Coil Spring For Replacement Of Shock Absorber, Spring Set, Repair Bent Struts And Damaged Spindles. Performance: - Compress Spring At 10mm Increments - 1/2-inch Drive Ratchet Design: -double-ended Jaws With Safety Hooks. - Forged Steel Brand New 3 Pcs 3 Air Compressor Functional: Putting Atmospheric Air Under High Pressure, “compressing” The Air And Converting Its Potential Energy Into Kinetic Energy That It Stores In An Air Tank For Use. Performance - Belt Driven - Maximum Pressure: 115 Psi - Tank Capacity: Maximum Of 155 Liters - Displacement: 16.3 Cubic Feet Per Minute (cfm) Design: - Single Phase - Rubberized Wheel With Handle Brand New 1 Unit Impact Wrench Hydraulic Functional: Tightening Or Loosening Nuts Quickly. They Are Essentially Small Handheld Electric Or Pneumatic Motors That Can Rotate Socket Wrenches At High Speed. Performance: - 1/2" Square Drive - Air Pressure: Maximum Of 90 Psi - Load Speed: Maximum Of 7,000 Rpm - Twin Hammer Mechanism Design - 1/4" Hose Inlet - 3/8" Air Hose - Weight: At Least 5.7 Lbs - Length: At Least 7.3" Brand New 2 Pcs Impact Wrench Portable Functional: Tightening Or Loosening Nuts Quickly. They Are Essentially Small Handheld Electric Or Pneumatic Motors That Can Rotate Socket Wrenches At High Speed. Design: - Cordless And Rechargeable - Brushless - Rubberized Soft Grip - 4.9 Lbs Weight Inclusion: - 40volts Lithium-ion (li-ion) Battery W/ 1 Spare Battery - Charger Environmental Interface: Power Saving Brand New 1 Pc Floor Jack (3 Tons) Functional: Has Horizontal Pistons And A Long Arm Which Provides The Vertical Motion For Lifting. Performance: - Max Lifting Capacity Of 3 Tons - Double Pump - Lifting Height: Up To 500mm Or 1.6 Ft. - Weight: Up To 35 Kgs Design: -hydraulic - Low Profile - Steel Material Brand New 2 Pcs Floor Jack (5 Tons) Functional: Has Horizontal Pistons And A Long Arm Which Provides The Vertical Motion For Lifting. Performance: - Max Lifting Capacity Of 5 Tons -double Pump - Lifting Height: Up To 500mm Or 1.6 Ft. - Weight: 45 Kgs Design: -hydraulic - Low Profile - Steel Material Brand New 2 Pcs Jack Stands Functional: A Jack Stand Is A Metal Height-adjustable Mechanical Device That Is Used To Support The Weight Of A Lifted Vehicle. Most Commonly, They Are Placed Underneath The Car As A Safety Net To Protect Against A Vehicle Falling On A Body Part. Performance: - Quickly And Safely Lock The Position With The Included Locking Pin. - Circular Base Pads Allow For Maximum Stability And Safety. - Includes 2 Jack Stands. Design: - Made From High-grade Steel - With Four Steel Feet - 3 Tons Per Pair - With A Rubber Top Post Brand New 3 Pairs Socket Wrench Functional: Socket Wrenches Are Widely Used Hand Tools For Easy Tightening And Loosening Of Common Fasteners, Typically Nuts And Bolts. Performance: They Work The Same Way As Standard Spanners And Wrenches, But Their Ratcheting Design Allows The User To Apply Torque More Easily, With Less Strain And Fatigue. Design: - Hexagon Head - Chromium-vanadium Steel / Alloyed Steel Included The Following: - 1pcs 1/4" Drive Ratchet Wrench,45t - 13pcs 1/4" Drive Socket: 4mm To 14mm - 1pcs 1/4" Drive Universal Joint - 2pcs 1/4" Drive Extension Bar 50mm 100mm - 1pcs 1/4" 114mm Sliding T Bar - 1pcs 1/4" 150mm Flexible Extension Bar - 1pcs 1/2" Drive Ratchet Wrench,45t - 18pcs 1/2" Drive Socket - 8mm To 32mm - 1pcs 1/2" Drive Universal Joint - 2pcs 1/2" Drive Extension Bar 125mm 250mm - 1pcs 1/2" 250mm Sliding T Bar - 2pcs Spark Plug Socket 16mm 21mm Brand New 2 Set Combination Wrench Functional: Combination Wrenches Have A Closed Loop On One Side (box-end) For Hexagonal Or Square Nuts, While The Other End Is An Open U-shape (open-end) Performance: These Wrenches Are Often Used For Nuts That Are Hard To Loosen. The Closed End Can Loosen The Nut, While The Open End Is Then Used To Unscrew It Fully. Design: - Flexible Ratchet Spanner - Chromium-vanadium Steel / Alloyed Steel - Sizes 8mm To 19mm Brand New 3 Set Screw Driver Set Functional: A Screwdriver Is A Simple And Common Tool Used To Install Or Remove Screws. Performance: Screwdrivers Perform Simple Functions In A Simple Design And Come In Several Types Depending On The Shape Of The Screw. Design: - Bi-material Handle - Magnetic Tip Holds Screws Securely -black Chrome Plating And Nickel-coated Tips - Chromium-vanadium Steel / Alloyed Steel - Philips Screwdriver: Ph1 X 3 In., 1pc Ph2 X 4 In, And 1pc Ph3 X 6 In - Slotted Or Flathead Screwdriver: 1pc Sl3/16 In X 4 In, 1pc Sl1/4 In X 4 In, And 1pc Sl5/16 In X 6 In - Robertson Head/ Square Screwdriver: 1pc Sq1 X 3 In And 1pc Sq2 X 4 In Brand New 3 Set Set Of Allen Wrench (t-handle) Functional: Hex Keys, Commonly Known As Allen Keys/wrenches In The Uk And Various Other Countries, Are A Very Simple Hand Tool Of The General Spanner And Socket Family. Performance: Used For Tightening And Loosening Hexagonal Bolts And Other Compatible Fasteners. Quantity: At Least 8pcs Per Set Of T-handle Torx/hex Wrench Design: - Sizes：2x75mm To10x200mm Or 2 To 10 Metric - Chromium-vanadium Steel / Alloyed Steel Brand New 2 Set Adjustable Torque Wrench Handle Functional: It Is A Fundamental Element In General Mechanics, Tire Changing Operations And Industrial Maintenance & Repair Industries, To Ensure Customers' Safety. Performance: Used To Control And Apply A Specific Torque To A Fastener Such As A Bolt Or A Nut. - 1/2" Drive - Torque Range: 40 To 200 N.m - Forward And Reverse Torque Capability - High Accuracy With A Control Mechanism -click Torque Wrench - Heavy Duty Design: - Chromium-vanadium Steel / Alloyed Steel - Society Automotive Engineers (sae)/metric Scales For Foot-pound And Newton-meter Applications. - 10-100 Ft-lbs Torque - Locking Trigger - Length: 30.2 Inches Brand New 3 Pcs Mechanical Pliers Functional: Slip-joint Pliers Have Grooved Jaws, And The Pivot Hole In One Member Is Elongated So That The Member Can Pivot In Either Of Two Positions In Order To Grasp Objects Of Different Size In The Most Effective Way. Performance: Hand-operated Tool For Holding And Gripping Small Articles Or For Bending And Cutting Wire. Design: Material: Plastic, Chromium-vanadium Steel Product Dimensions: 34l X 25.9w Centimetres Handle Material: Plastic, Steel Item Weight: 3 Pounds Grip Type: Non-slip Inclusion: - 1pc 8" High Leverage Combination Pliers - 1pc 7" High Leverage Diagonal Cutting Pliers - 1pc 8" High Leverage Long Nose Pliers - 1pc 10" Pump Plierss Brand New 3 Set Circlip Pliers Functional: There Are Two Types Of Pliers. On External Pliers The Head Opens When The Handle Is Squeezed And The Circlip Is Pushed Out. Performance: Circlip Pliers Are Special Pliers For Installing Or Removing Circlips On Shafts Or Insides Bores. Design: - 2pcs 180° - 2pcs 90° - Carbon Steel - Size:7"/180mm Brand New 2 Set Electricians Tool Kit Set Functional: Electrical Tools Are Tools Used To Work On An Electrical System. Performance: These Can Include A Wide Range Of Tools Such As Wire And Cable Cutters, Wire Strippers, Coaxial Compression Tools, Telephony Tools, Wire Cutter/strippers, Cable Tie Tools, Accessories, And Even More. Design: Electrician Tools Set Include: Digital Multimeter With Alkaline Battery - 6" Adjustable Wrench - 6" Long Nose Plier - 6" Diagonal Cutting Pliers - 7" Combination Plier - 6" Wire Stripper - 5.5 Mm Slotted Screwdriver - Snap-off Blade Knife - 3m/10'' Steel Measuring Tape - Flashlight - 4''x45m Pvc Insulating Tape - Tweezers 125mm - 5 5" Electrician's Scissors Brand New 3 Set Impact Deep Socket Wrench Set Functional: They Provide Added Accessibility In Limited Spaces And In Hard-to-reach Places All While Retaining Their Ability To Tighten Or Loosen. Performance: Deep Impact Sockets Are Made To Be Used With Impact Tools. - 1/2" Drive Design: - Sizes:10mm To 24mm - Length: 78mm - Heat Treatment - Chromium-vanadium Steel / Alloyed Steel Brand New 3 Set Statement Of Compliance I Hereby Commit To Provide The Above Specified Requirements In Compliance With The Technical Specifications For The Project: Supply And Delivery Of Automotive Tools ___________________________________________________________ Name And Signature Of Authorized Representative Supplier’s Business Name: Tin: Address: Telephone No.: Fax No.: E-mail: Authorized Representative’s Signature Over Printed Name And Designation: Date:

Details: Description Philippine Bidding Documents (as Harmonized With Development Partners) Repair Of Dairy Cattle Shed Bid No. Agr-24-1693-b Iloilo Provincial Government Sixth Edition Table Of Contents Glossary Of Terms, Abbreviations, And Acronyms 4 Section I. Invitation To Bid 7 Section Ii. Instructions To Bidders 9 1. Scope Of Bid 9 2. Funding Information 9 3. Bidding Requirements 9 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices 9 5. Eligible Bidders 10 6. Origin Of Associated Goods 10 7. Subcontracts 10 8. Pre-bid Conference 10 9. Clarification And Amendment Of Bidding Documents 10 10. Documents Comprising The Bid: Eligibility And Technical Components 11 11. Documents Comprising The Bid: Financial Component 11 12. Alternative Bids 11 13. Bid Prices 12 14. Bid And Payment Currencies 12 15. Bid Security 12 16. Sealing And Marking Of Bids 12 17. Deadline For Submission Of Bids 12 18. Opening And Preliminary Examination Of Bids 13 19. Detailed Evaluation And Comparison Of Bids 13 20. Post Qualification 13 21. Signing Of The Contract 13 Section Iii. Bid Data Sheet 14 Section Iv. General Conditions Of Contract 16 1. Scope Of Contract 16 2. Sectional Completion Of Works 16 3. Possession Of Site 16 4. The Contractor’s Obligations 16 5. Performance Security 17 6. Site Investigation Reports 17 7. Warranty 17 8. Liability Of The Contractor 17 9. Termination For Other Causes 17 10. Dayworks 18 11. Program Of Work 18 12. Instructions, Inspections And Audits 18 13. Advance Payment 18 14. Progress Payments 18 15. Operating And Maintenance Manuals 18 Section V. Special Conditions Of Contract 19 Section Vi. Specifications 20 Section Vii. Drawings 26 Section Viii. Bill Of Quantities Error! Bookmark Not Defined. Section Ix. Checklist Of Technical And Financial Documents 30 Glossary Of Terms, Abbreviations, And Acronyms Abc – Approved Budget For The Contract. Arcc – Allowable Range Of Contract Cost. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Cda – Cooperative Development Authority. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Contractor – Is A Natural Or Juridical Entity Whose Proposal Was Accepted By The Procuring Entity And To Whom The Contract To Execute The Work Was Awarded. Contractor As Used In These Bidding Documents May Likewise Refer To A Supplier, Distributor, Manufacturer, Or Consultant. Cpi – Consumer Price Index. Dole – Department Of Labor And Employment. Dti – Department Of Trade And Industry. Foreign-funded Procurement Or Foreign-assisted Project – Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government A Pcab – Philippine Contractors Accreditation Board. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Un – United Nations. Republic Of The Philippines Iloilo Provincial Government Section I. Invitation To Bid For Repair Of Dairy Cattle Shed At Brgy. Calamigan, Concepcion, Iloilo Bid No. Agr-24-1693-b 1. The Iloilo Provincial Government, Through The General Development Fund Fy 2024 Intends To Apply The Sum Of Seven Hundred Fifty Thousand Pesos (p750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Agr-24-1693-b For The Repair Of Dairy Cattle Shed At Brgy. Calamigan, Concepcion, Iloilo For The Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Eighty (80) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines And Inspect The Bidding Documents At The Address Given Below From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 31, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p1, 000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On None At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines, And/or Through Videoconferencing/webcasting Via Zoom Conference Which Shall Be Open To Prospective Bidders. The Default Meeting Id And Password Shall Be: Meeting Id: 4340851724 // Password: 0922 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before November 07, 2024, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 07, 2024, 9:01 A.m. At Bids And Awards Committee Secretariat, 5th Floor, New Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City, Philippines. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Head, Bac Secretariat 5f New Iloilo Provincial Capitol Bonifacio Drive, Iloilo City Tel. No. (33) 336-0736 Fax No. (33) 337-7731 Email: Ipg_bacs@yahoo.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.iloilo.gov.ph October 24, 2024 Atty. Dennis T. Ventilacion Bac Chairperson Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Invites Bids For The Repair Of Dairy Cattle Shed At Brgy. Calamigan, Concepcion, Iloilo, With Project Identification Number Agr-24-1693-b. The Procurement Project (referred To Herein As “project”) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount Of Seven Hundred Fifty Thousand Pesos (p 750,000.00) 2.2. The Source Of Funding Is: A.) General Development Fund Fy 2024 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address At Bac Office, 5th Floor, New Iloilo Provincial Capitol, Iloilo City And/or Through Videoconferencing As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. In Joint Ventures, A Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project, Shall Be Required. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until March 07, 2025. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: A) Construction Of Swine House/poultry/cattle Pen. 7.1 The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed. 10.3 Special Philippines Contractors Accreditors Board License 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel General Experience Relevant Experience Project Engineer 1 Year 1 Year Material Engineer 1 Year 1 Year Agricultural & Biosystems Engineer 1 Year 1 Year Health & Safety Officer 1 Year 1 Year 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Welding Machine - 1 One Bagger Mixer - 1 Plate Compactor - 1 12 Alternative Bids Are Not Allowed 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 19.2 Partial Bids Are Allowed 20 No Further Instructions. 21 The Additional Contract Documents Relevant To The Project That Are Required By The Procuring Entity Are: A. Construction Schedule And S-curve; B. Manpower Schedule; C. Construction Methods; D. Equipment Utilization Schedule; E. Construction Safety And Health Program Approved By The Department Of Labor And Employment; And F. Pert/cpm Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 4.1. The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 4.2. If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property(ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Gcc Clause 2 As Per Construction Schedule/contract Period 3.1 The Procuring Entity Shall Give Possession Of All Parts Of The Site To The Contractor Upon Effectivity Of The Contracts. 6 No Further Instructions 7.2 In Case Of Semi-permanent Structures, Such As Buildings Of Types 1, 2, And 3 As Classified Under The National Building Code Of The Philippines, Concrete/asphalt Roads, Concrete River Control, Drainage, Irrigation Lined Canals, River Landing, Deep Wells, Rock Causeway, Pedestrian Overpass, And Other Similar Semi-permanent Structures: Five (5) Years. 10 Dayworks Are Applicable At The Rate Shown In The Contractor’s Original Bid. 11.1 No Further Instructions 11.2 No Further Instructions 13 The Amount Of The Advance Shall Not Exceed 15% Of The Total Contract Price. 14 Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15.1 The Date By Which Operating And Maintenance Manuals Are Required Shall Be At Least 5 Days Before The Testing And Commissioning. The Date By Which “as Built” Drawings Are Required Shall Be At Least 10 Days Prior To The Final Billing. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is 1% Of The Final Contract Amount.   Section Vi. Specification General Requirements All Works To Be Done Shall Be With First Class Workmanship And Shall Conform To The Plans And Specifications. All Materials To Be Used Shall Be Of Good Quality And Properly Inspected By The Project Engineer. The Provincial Agriculturist Is Reserved The Right To Rescind, Terminate, Suspend The Contract If He Deems Necessary And To The Best Interest Of The Government. The Contractor Shall Be Liable For All Damages That Will Occur During The Construction Of The Project. Scope Of Work The Works Include Furnishing Of Labor, Materials, Tools, Equipment’s And Other Incidentals Necessary To Complete The Project Such As Demolition And Disposal Works, Embankment, Excavation, Concrete Works (concreting, Steel Works, And Form Works), Masonry, Installation Of Pen, And Roofing Works. General Condition A. The Works To Be Done Herein Shall Be The Improvement Of Repair Of Dairy Cattle Shed As Of Approved And Of Quality Materials Completed As Per Plans, Details And Specifications. Supervision Of The Work Shall Be Done Under The Responsibility Of The Project Engineer With The Help Of The Construction Foreman. B. All Materials Employed And To Be Used In The Construction Shall Be Brand New, Unless Otherwise Or As Directed And Approved By The Project Engineer. C. Skilled Workmen And Workmanship Subject To Project Engineer’s Approval Shall Perform Methods Of The Construction In The Most Acceptable Manner. D. The Drawings Referred To In The Specifications Including Supplementary One, To Be Furnished As The Work Progress Are Intended To Cooperate With The Specification And To Form Part Hereof. Where Figures Are Given, They Are To Be Followed In Performance To Measurement By Scale. E. The Assigned Engineer Or Construction Foreman Shall Lay – Out The Structure In Accordance With The Drawings And Directions On Plans As He Shall Not Only Responsible But Liable For Any Failure To Comply In This Respect With The Said Drawings, Specifications And Directions For Its Due And Accurate Location On The Lot. Project Sign Board / Billboard The Contractor Shall Ensure That The Project Site Is Identified With Information Billboard Which Shall Be Erected At The Beginning And Ending Of The Proposed Project. The Layout Of The Billboard Shall Accord To The Specifications Pursuant To The Commission On Audit (coa) Circular No. 2013-004 Issued On January 30, 2013. Coa Billboard Projects Status Project Status Remarks Duration Started Target Date Of Completion Percentage Of Completion As Of (date) Cost Incurred To Date Date Completed Pao Billboard Republic Of The Philippines Province Of Iloilo Provincial Agriculture Office Iloilo City Name Of Project: Location Of Project: Contractor: Implementing Agency: Appropriation: Fund Source: Contract Duration: Project Starting Date: Project Completion Date: Another Priority Project Of The Iloilo Provincial Government The Billboard’s Specifications Shall Conform To The Following Requirements: A. Tarpaulin, White 8ft X 8ft (coa) 4ft X 8ft (pao) B. Resolution 70 Dpi; C. Font Helvetica; D. Font Size: Main Information – 3”; E. Sub Information – 1”; F. Font Color: Black; G. Suitable Frame: Rigid Wood Or Steel Frame With Post; And, H. Posting: Outside Display At The Project Location After Award Has Been Made. Measurement The Supply And Erection Of The Project Billboard Shall Be In Accordance With Provisions Of This Specifications. Basis Of Payment No Additional Payment Shall Be Made In This Regard. Description Of Works: Demolition And Disposal Works A. Demolition Operations: Do Not Damage Building Elements And Improvements Indicated To Remain. Storage Or Sale Of Items At Project Site Is Prohibited. B. Utilities: Located, Identify, Disconnect, And Seal Or Cap Off Utilities In Buildings To Be Demolished. C. Occupies Spaces: Do Not Close Or Obstruct Streets, Walks, Drives Or Other Occupied Or Used Spaces Or Facilities Without The Written Permission Of The Owner And The Authorities Having Jurisdiction. Do Not Interrupt Utilities Serving Occupied Or Used Facilities Without The Written Permission Of The Owner And Authorities Having Jurisdiction. If Necessary, Provide Temporary Utilities. D. Operations: Cease Operations If Public Safety Or Remaining Structures Are Endangered. Perform Temporary Corrective Measures Until Operations Can Be Continued Properly. E. Security: Provide Adequate Protection Against Accidental Trespassing. Secured Project After Work Hours. F. Clearing Operations Include The Removal Of Demolished Materials And Objectionable Matter, Protection Of Existing Structures/facilities Left Functional And Clearing To Allow For New Construction Protection Necessary To Prevent Damage To Existing Structures And Facilities. Likewise, Disposal Of Materials, Trash And Debris In A Safe And Acceptable Manner In A Accordance With Applicable Ordinances. Embankment The Construction Of The Embankment Shall Be In Accordance With These Specifications And In Conformity With The Lines, Grades And Dimensions Shown On The Plans Or Established By The Engineer. It Shall Be Constructed Of Suitable Materials For Which Is Acceptable In Accordance With The Contract And Which Can Be Compacted In The Manner In Item 104. It Can Be A Common Rock. Embankments And Backfills Shall Not Contain Muck, Peat, Sod, Roots Ot Other Deleterious Matter. Rocks Or Broken Concrete Or Other Solid, Bulky Materials Shall Not Be Placed In The Embankment Areas Where Piling Is To Be Placed Or Driven. Where Shown On The Plans Directed By The Engineer, The Surface Of The Existing Ground Shall Be Compacted To A Depth Of 150mm (6 Inches) And To The Specified Requirements Of This Item. Excavation Works Foundation Trench Shall Be Dug To The Exact Width And Depth And Levels As Indicated In The Drawings. Sides Of The Trenches Shall Be Vertical. In Case Soil Does Not Permit Vertical Sides, The Contractor Shall Protect The Sides With Timber Shoring. Excavated Earth Shall Not Be Placed Within 1.5 Meters Of The Edge Of The Trench. The Project Engineer May Direct The Contractor To Be Excavated Earth At A Particular Site Up To 30 Meters Away From The Proposed Building. No Excavation Or Foundation Work Shall Be Filled In Or Covered Up Before The Inspection And Approval Of The Project Engineer. Concrete Works A. General: All Concrete Works To Be Done Herein Shall Be In Accordance With Aci Requirement And/ Or Standard Specifications As Adopted By The Government. B. Cement Shall Be Portland Cement (type 1) With 40 Kgs/bag. C. Fine Aggregates Shall Be Clean Hold River Sand, Free From Injurious Amount Of Clay, Loam And Vegetable Matter. D. Coarse Aggregates Shall Be River Run Gravel Or Broken Stones. The Maximum Size Shall Be 1/5 Of The Nearest Dimensions Between Side Forms Of The Concrete Members Or ¾ The Maximum Clear Spacing Between Reinforcing Bars. E. Reinforcing Bars: Reinforcing Bars Shall Be Intermediate Grade And Deformed And Shall Have Minimum Yield Strength Of 275 Mpa (40,000 Psi) F. The Wires Shall Be Locally Produced G.i. Wire Gauge No. 16. G. Placing Reinforcement And Miscellaneous Materials: Provide Bars, Wire Fabrics, Wire Ties, Supports And Other Devices Necessary To Install And Secure Reinforcement. Reinforcement Shall Not Contain Rust, Scale Oil, Grease Clay And Foreign Substances That Would Reduce The Bond. Rusting Of Reinforcement Is A Basis Of Rejection If The Effective Cross-sectional Area Of The Normal Weight Per Foot Of The Reinforcement Has Been Reduced To Less Than Specified In Paragraph Entitled “reinforcing Bars”. Remove Loose Rust Prior To Placing Of Steel. H. Proportioning Of Concrete For Concrete Works Use 1:2:3 I. All Concrete Cured For Least Seven (7) Days To Twenty-eight (28) Days If Possible After Placement To Attain The Required Strength Of Concrete. J. Removal Of Forms: Forms Shall Be Removed In Such A Manner As Not To Impair The Safety And Serviceability Of The Structures. Masonry A. General: All Concrete Works To Be Done Herein Shall Be In Accordance With Aci Requirement And/or Standard Specifications As Adopted By The Government. B. Cement Shall Be Portland Cement (type I) With 40kgs/bag. C. Fine Aggregates Shall Be Clean Hold River Sand, Free From Injurious Amount Of Clay, Loam And Vegetable Matter. D. Coarse Aggregates Shall Be River Run Gravel Or Broken Stines. The Maximum Size Shall Be 1/5 Of The Nearest Dimensions Between Side Forms Of The Concrete Members Or ¾ The Maximum Clear Spacing Between Reinforcing Bars. E. Reinforcing Bars: Reinforcing Bars Shall Be Intermediate Grate And Deformed And Shall Have A Minimum Yield Strength Of 275 Mpa (40,000 Psi). F. The Wires Shall Be Locally Produced G.i. Wire Gauge No. 16. G. Placing Reinforcement Provides Bars, Wire Fabrics, Wire Ties Supports And Other Devices Necessary To Install And Secure Reinforcement. Reinforcement Shall Not Contain Rust, Scale Oil, Grease Clay, And Foreign Substance That Would Reduce The Bond. Rusting Of A Reinforcement Is A Basis Of Rejection If The Effective Cross-sectional Area Of The Normal Weight Per Foot Of The Reinforcement Has Been Reduced To Less Than Specified In Paragraph Entitled “reinforcing Bars”. Remove Loose Rust Prior To Placing Of Steel. Splices Shall Be Approved Prior To Use. Do Not Splice At Points Of Maximum Stress. Overlapped Welded Wire Fabric The Spacing Of The Cross Wires, Plus 50 Mm (2 Inches). H. Concrete Hollow Blocks: 1. For Walls And Partitions, Use Chb Or Its Equivalent. 2. Minimum Comprehensive Strength Shall Be 700 Psi. I. All Concrete Cured For Least Seven (7) Days To Twenty-eight (28) Days If Possible After Placement To Attain The Required Strength Of Concrete. J. Removal Of Forms: Forms Shall Be Removed In Such A Manner As Not To Impair The Safety And Serviceability Of The Structure. K. Mixture For Plastering: Thickness Of Plastering Shall Be 16 Mm Thick. A Mixture Of Wasted Sand And Portland Cement. Installation Of Pen For The Railings Use 3” Diameter, Schedule 40 G.i. Pipe For The Vertical Post And 2” Diameter, Schedule 40 G.i. Pipe For Horizontal And Braces. All Materials Used Must Be Of Good Quality, And All Painted Materials Must Be Coated With Two (2) Coats Of Metal Primer Red Oxide. The Areas To Be Painted Shall Be Prepared Before Applying The Paint. During Installation, The Contractor Must Conform To The Project Engineer's Specifications. Roofing Works 1. Use 1.5 Mm Thick X 31” X16’ Metalplas Rib Type Sheet. It Shall Be Brand New As Approved By The Project Engineer. A. Use 2” X 3” X 1.5mm Thk Light Gauge C-purlins. B. Use 2” X 6” X 1.5 Mm Thk Light Gauge C-purlins For Rafters. C. Use 2” X 2” X 1/4” Thk Angle Bar For Top And Bottom Cord Of Roof Beam. D. Use 1 ½” X 1 ½” Thk Angle Bar For The Web Members Of Roof Beam. E. Use 1” X 1” X 3/16” Thk Angle Bar For The Top And Bottom Cord Of Fascia Frame. F. Use 1” X 1” X 3/16” Thk Flat Bars For Web Members Of Fascia Frame. G. Use Compatible Fascia Cover. H. Use .6mm Thk X 18” X 8’ Ordinary Ridge Roll. I. Use .6mm Thk Ordinary Gutter. 2. Fasten Framing Members Together By Welding Or By Using Bolts. Welding Shall Conform To Aws D1.3 Welding Procedure. Do Not Field Weld Materials Lighter Than 18 Gauge. 3. Complete Painting Covers All Metal Surfaces And Other Interior Parts Except Otherwise Specified. Areas To Be Painted Shall Be Cleaned And Sanded Before Applying The Paint. Painting Works Should Be Done With Good Quality Workmanship By A Skilled Painter. 4. Paint To Be Used Shall Be Leading Brand Available In The Market With The Approval Of The Project Engineer. Apply Two (2) Coats As Paint Follows: 1st & 2nd Coat = Metal Primer Red Oxide Paint Shall Be Thoroughly Dry Before Applying The Succeeding Coat No Exterior Painting Shall Be Done With The Surface To Be Applied Is Damp Or During Rainy Weather. Proper Works At All Times By Suitable Materials As Work Progress, Upon Completion Of Work, Remove All Paints Stains And Varnish Spots From Floors And Other Surfaces, Leave Work Clean And In Acceptable Condition. Section Vii. Drawings All Annexes Shall Be Annexed And The Title Shall Be Specified As To What Plan The Drawing Pertain To Annex A – Architectural Design Annex B- Project Billboard Plan Section Viii. Bill Of Quantities Bid No. Agr- 24-1693-b Item Description Quantity Unit Unit Cost Total Cost No. I. Demolition And Disposal Works 44.55 Sq.m Pesos And Ctvs. (p ) / Sq.m P Ii. Embankment 13.50 Cu. M Pesos And Ctvs. (p ) / Cu.m P Iii. Excavation 4.49 Cu. M Pesos And Ctvs. (p ) / Cu.m P Iv. Concrete Works A. Concreting 18.30 Cu.m Pesos And Ctvs. (p ) / Cu.m P B. Steel Works 708.85 Kgs And Ctvs. (p ) / Kgs P C. Form Works 64.42 Sq. M Pesos And Ctvs. (p ) / Sq.m P V. Masonry 26.35 Sq. M Pesos And Ctvs. (p ) / Sq.m P Vi. Installation Of Pen 226.70 M Pesos And Ctvs. (p ) / M P Vii. Roofing Works 98.00 Sq.m Pesos And Ctvs. (p ) / Sq.m P Total Bid Cost In Figures P Total Bid Cost In Words Summary Of Costs Item No. Bid Amount I. Demolition And Disposal Works ₱ ________________________________ Ii. Embankment ₱ ________________________________ Iii. Excavation ₱ ________________________________ Iv. Concrete Works A. Concreting ₱ ________________________________ B. Steel Works ₱ ________________________________ C. Form Works ₱ ________________________________ V. Masonry ₱ ________________________________ Vi. Installation Of Pen ₱ ________________________________ Vii. Roofing Works ₱ ________________________________ Total Bid Amount ₱ ________________________________

Details: Proposal Due Date And Time: This Baa Will Remain Open For A Period Of Seven (7) Years From The Date Of Publication. No Proposals Should Be Submitted Against This Overarching Baa. Proposal Due Dates And Times Will Be Specified In Calls Published Separately From The Overarching Announcement. Proposals Received After The Due Date And Time Specified In The Call Shall Be Governed By The Provisions Of Far 52.215- 1(c)(3). It Should Be Noted That This Installation Observes Strict Security Procedures To Enter The Facility. These Security Procedures Are Not Considered An Interruption Of Normal Government Processes, And Proposals Received After The Above Stated Date And Time As A Result Of Security Delays Will Be Considered “late”. Note: If Offerors Use Commercial Carriers For Delivery Of Proposals, Carriers May Not Honor Time-of-day Delivery Guarantees On Military Installations. Early Proposal Submission Is Encouraged. i. Program Description 1. Program Background vanguard Center (formerly Known As Maui High Performance Computing Center Mhpcc) Is One Of Five Defense Supercomputing Resource Centers (dsrcs) For The Department Of Defense (dod) High Performance Computing Modernization Program (hpcmp), And Provides Advanced, High-performance Computing Tools Based On The Latest Technologies To Government Researchers. The Mission Of The Vanguard Center Is To Evaluate And Optimize Early-production Hpc Technology And Provide Breakthrough Software Solutions To Significantly Increase The Breadth And Impact Of The Hpcmp. The Strategic Focus Areas Of The Vanguard Center Are: ‐ Exploring And Evaluating Emerging Hpc Architectures And Technologies ‐ Developing Breakthrough, Hpc-backed Solutions For High Priority Dod Use Cases ‐ Lowering Barriers To High Productivity Computing By Creating A Modern Hpc Ecosystem In Addition To The Hpcmp-focused Mission, The Vanguard Center Contributes To The Afrl Modeling, Simulation, And Data Analytics (ms&a) Enterprise Which May Include Supporting Real Time, Physics-based Campaign Level As Well As Space Situational Analyses. The Vanguard Center Also Plans To Demonstrate High Impact Hpc Integration And Federation To Address Dod Needs In The Pacific Theater. requirement Description the R&d Requirement For This Baa Is Based On The Vanguard Center’s Mission To Evaluate And Optimize Earlyproduction Hpc Technology And Provide Breakthrough Software Solutions To Significantly Increase The Breadth And Impact Of The Hpcmp. In Particular, Research Objectives Center On Emerging Technologies And Lowering Barriers To The Use Of Hpc. Vanguard Center Is Seeking To Reduce Risk And Improve Performance By Transitioning Hpc Research And Benchmarking Hardware, Application Software, Networking And Refactoring Approaches Into Hpcmp Research System Procurement Activities; Identify And Exploit Trends In Hpc Hardware And Software To Deliver Capability And Decrease Time To Solution For R&d. Additionally, The Vanguard Center Is Seeking To Advance Dod Productivity Through A Modern Hpc Ecosystem. This Ecosystem Will Integrate Hardware (hw) And Software (sw) To Create Dynamic Workflows, Increased Accessibility, And Enhanced Collaboration By Identifying Trends In Best Software And Command And Control (c2) Practices To Improve Effectiveness And Productivity Of R&d, Including Secure Access To Hpc Using Modern Hardware And Software. Tasks Associated With These Technical Objectives May Include: ‐ Exploring New Architectures For Hpc Applicability Such As: Many Core; Gpgpus; Arm64; Next Generation X86; Data-intensive; Cognitive; Quantum; Mls ‐ Developing New Software Approaches For Hpc Applicability Such As: Python (+ Extensions); Domain Specific Languages (dsl) ‐ Researching New Networking Approaches For Hpc Applicability And Utility, To Include Programmable Networks ‐ Exploring New Network And System Interfaces Such As Optical Networks Fused With Optical Interconnections And Chip Photonics ‐ Exploring And Developing New Computer/software/network Ecosystems Such As Interactive Computing And Rendered Results Via Jupyter Notebooks Over Application Driven Networks ‐ Developing New And/or Updating Legacy Software (aka: Code Refactoring) For Use With New And Emerging Hpc Architectures ‐ Researching New Network And Software Interfaces And Developing Software To Provide Secure Access Of Hpc At Different Levels Of Security Through Modern Browsers And Devices, To Include Application Driven Networks ‐ Researching And Developing Hpc Workflow Extractions To Support A Broad Class Of Physics-based Modeling And Simulation Techniques For Test And Integration And Speeding Time To Solution Through Innovative Use Of Hpc Hardware And Software afrl May Seek Teaming-approaches For Testing And Disseminating Capabilities As Ancillary To These Technical Areas. The Teams May Be Established By Parties External To The Research Or In Addition To Government Personnel. deliverable Items: The Following General Data Deliverables Are Representative Of The Types Of Data That May Be Required For Any Call: (1) Program Plan With Updates As Needed; (2) Test Plans; (3) Monthly Status/financial Reports; (4) Technical Reports; (5) Computer Program Documentation/software User Manuals; (6) Computer Program/software Source Code; (7) Final Scientific And Technical Reports; (8) Presentation Materials; (9) Patent Reports; And (10) Prototypes. Data Deliverables Are Subject To Negotiations On Each Individual Call. The Scientific And Technical Report Shall Be Prepared Iaw The Most Current Afrl Ansi/niso Standard Z39.18-2005 Guidelines, Or Other Most Current Report Preparation Guidance. 2. Schedule: The Period Of Performance Will Be Stated In The Call. 3. White Papers/proposals: White Papers Are Brief Descriptive Summaries That Can Be Submitted By Offerors For Consideration In Response To This Baa Solicitation As Specified Per Individual Call (see Section V For Information On White Paper Evaluation Procedures). Offerors Whose White Papers Are Evaluated As Satisfying The Technical Merit Factor (section V, Paragraph 2), And For Which It Is Determined There Is Sufficient Funding Available, Will Be Asked To Submit A Full Technical And Cost/business Proposal. Offerors Whose White Papers Were Not Selected To Submit A Technical Cost/business Proposal Will Be Notified. 4. Organizational Conflict Of Interest (oci): Oci, If Applicable, Will Be Determined And Addressed At The Call Level. 5. System For Award Management (sam): Unless Exempted By 2 Cfr 25.110 All Offerors Must: (1) Be Registered In The System For Award Management (sam) Prior To Submitting An Application (for An Award) Or Proposal; (2) Maintain An Active Sam Registration With Current Information At All Times During Which It Has An Active Federal Award Or An Application Or Proposal Under Consideration By An Agency; And (3) Provide Itsduns Number In Each Application Or Proposal It Submits To The Agency. On-line Registration Instructions Can Be Accessed From The Sam Home Page At Www.sam.gov. potential Offerors That Are Notified As Eligible For An Award Must Submit Annual Electronic Representations And Certifications Via The System For Award Management (sam) Website At Www.sam.gov. These Far And Dfars Level Representations And Certifications Are Required In Addition To The Representations And Certifications That Will Be Attached To Each Call. Before Submitting The Electronic Representations And Certifications, Contractors Must Be Registered In The Systems For Award Management (sam) Database. ii. Award Information 1. Anticipated Funding: The Estimated Overarching Baa Ceiling Is $48.0m. All Funding Is Subject To Change Due To Government Discretion And Availability. All Potential Offerors Should Be Aware That Funding In Any Or All Areas May Change With Little Or No Notice Due To Unanticipated Budget Fluctuations. 2. Anticipated Number Of Awards: The Air Force Anticipates Awarding One Or More Contracts, And May Consider An Assistance Instrument, Or Other Transaction Procurements (otps). The Air Force Reserves The Right To Select All, Part, Or None Of The Proposals Received, Subject To The Availability Of Funds. * A Version Of This Baa For Assistance Instrument Opportunities Will Be Posted On Www.grants.gov. 3. Anticipated Award Date: It Is Anticipated This Baa Will Remain Open For A Period Of Seven (7) Years From The Date Of Publication. This Baa Will Be Reviewed Annually. Any Updates Or Possible Cancellation Will Be Issued As An Amendment To The Baa. This Annual Review And Subsequent Amendment To The Baa Shall Meet The Requirement Of Far 35.016 To Publish The Baa No Less Frequently Than Annually. 4. Anticipated Period Of Performance: The Period Of Performance Will Be Determined For Each Contract Award Based On The Requirements Of The Effort. 5. Funding Restrictions: The Cost Of Preparing White Papers And/or Proposals In Response To A Call Is Not Considered An Allowable Direct Charge To Any Resulting Contract Or Any Other Contract, But May Be An Allowable Expense To The Normal Bid And Proposal Indirect Costs Specified In Far 31.205-18(c), Independent Research And Development And Bid And Proposal Costs. iii. Eligibility Information 1. Eligible Offeror/applicants: All Responsible Sources Capable Of Satisfying The Government's Needs May Submit A Proposal. Small Businesses, Small Disadvantaged Business (sdb), Woman-owned Businesses, And Service-disabled Veteran-owned Businesses Are Encouraged To Submit Proposals; However, No Part Of This Announcement Will Be A Set-aside. Foreign Or Foreign-owned Offerors Are Advised That Their Participation Is Subject To Foreign Disclosure Review Procedures. Foreign Or Foreign-owned Offerors Should Immediately Contact The Contracting Office Focal Point Identified In The Call For Information If They Contemplate Responding. All Correspondence Must Reference The Baa Number, The Baa Title And The Call Number. 2. Federally Funded Research And Development Centers: The Following Guidance Is Provided For Federally Funded Research And Development Centers (ffrdcs) Contemplating Submitting A Proposal, As Either A Prime Or Subcontractor, In Response To A Call Against This Baa. Far 35.017-1(c)(4) Prohibits An Ffrdc From Competing With Any Non-ffrdc Concern In Response To A Federal Agency Request For Proposal For Other Than The Operation Of An Ffrdc (with Exceptions Stated In Dfars 235.017-1(c)(4)). There Is No Regulation Prohibiting An Ffrdc From Responding To A Solicitation. However, The Ffrdc’s Sponsoring Agency Must First Determine Whether The Proposed Effort Falls Within The Purpose, Mission, General Scope Of Effort, Or Special Competency Of The Ffrdc, And That Determination Must Be Included In The Ffrdc’s Proposal. In Addition, The Non-sponsoring Agency Must Determine If The Work Proposed Would Place The Ffrdc In Direct Competitionwith Domestic Private Industry. Only After These Initial Determinations Are Made Will A Determination Be Made Concerning The Ffrdc’s Eligibility To Receive An Award. 3. Government Agencies: If A Government Agency Is Interested In Performing Work, Please Contact The Technical Point Of Contact (tpoc) Identified In The Call. If Discussions Result In A Mutual Interest To Pursue Your Agency's Participation, The Effort Will Be Pursued Independently Of This Baa. 4. Security Classification: Depending On The Work To Be Performed, The Offeror May Require A Classified Facility Clearance And Safeguarding Capability; Therefore, Personnel Identified Must Be Cleared For Access To Information At The Equivalent Level Of Security At The Time Of Award. In Addition, The Offeror May Be Required To Have, Or Have Access To, A Certified And Government-approved Facility To Support Work Under A Call. If A Dd Form 254 Is Applicable, It Will Be Specified In The Individual Call With The Applicable Far Clause Attached. Offerors Must Verify Their Cognizant Security Office Information Is Current With Defense Security Service (dss) At Www.dss.mil. Calls Are Anticipated To Be Unclassified. For Calls Requiring Access To Classified Information, Offerors Must Have A Valid U.s. Security Clearance Of Secret Or Higher In Order To Respond. Calls Including Information Classified At The Secret Or Higher Level Will Be Released Only To Offerors Possessing The Appropriate Clearance. All Classified Material Will Be Handled In Accordance With E.o. 13526, National Industrial Security Program Operating Manual (nispom) Dod 5220.22-m, Dod Industrial Security Program 5200.01 Volume 1 Through 4, And Afi 16-1406. 5. Foreign Participation: a. Foreign Or Foreign-owned Offerors Are Advised Their Participation Is Subject To Foreign Disclosure Review Procedures. Foreign Or Foreign-owned Offerors Should Immediately Contact The Contracting Office Focal Point Identified In Section Vii For Information If They Contemplate Responding. Foreign Contractors Will Not Be Permitted To Participate At The Prime Contractor Level If It Is Determined The Acquisition Requires Access To Classified Information. b. Afrl Policy On Employment Of Non-us Citizen Contractors Applies To This Baa. Contractor Employees Requiring Access To Usaf Bases, Afrl Facilities, And/or Access To U.s. Government Information Technology Networks In Connection With The Work On This Contract Must Be U.s. Citizens. Possession Of A Permanent Resident Card (“green Card”) Does Not Equate To U.s. Citizenship. This Requirement Does Not Apply To Foreign Nationals Approved By The U.s. Department Of Defense Or U.s. State Department Under International Personnel Exchange Agreements With Foreign Governments. Any Waivers To This Requirement Must Be Granted In Writing By The Contracting Officer Prior To Providing Access. The Above Requirements Are In Addition To Any Other Contract Requirements Related To Obtaining A Common Access Card (cac). c. This Acquisition Involves Data That Are Subject To Export Control Laws And Regulations. Only Contractors Who Are Registered And Certified With The Defense Logistics Services Center (dlsc) And Have A Legitimate Business Purpose May Participate In This Solicitation. Contact The Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40937-3084 (1-877-352-2255) For Further Information On The Certification Process. You Must Submit A Copy Of Your Approved Dd Form 2345, Militarily Critical Technical Data Agreement, With Your Proposal. 6. Export Control: Information Involved In This Research Effort Will Be Subject To Export Control (international Traffic In Arms Regulation (itar) 22 Cfr 120-130 Or Export Administration Regulations (ear) 15 Cfr 730- 774). If The Effort Is Subject To Export Control, Then A Certified Dd Form 2345, Militarily Critical Technical Data Agreement, Will Be Required To Be Submitted With Proposal. export-controlled Items: As Prescribed By Dfars 225-7901, Dfars 252.225-7048, “export-controlled Item (jun 2013)” Is Contained In This Solicitation (as Shown Below). This Clause Shall Be Contained In All Solicitations And Resulting Contracts. export-controlled Items (jun 2013) (a) Definition. “export-controlled Items,” As Used In This Clause, Means Items Subject To The Export Administration Regulations (ear) (15 Cfr Parts 730-774) Or Theinternational Traffic In Arms Regulations (itar) (22 Cfr Parts 120-130). The Term Includes: (1) “defense Items,” Defined In The Arms Export Control Act, 22 U.s.c. 2778(j)(4)(a), As Defense Articles, Defense Services, And Related Technical Data And Further Defined In The Itar, 22 Cfr Part 120. (2) “items,” Defined In The Ear As “commodities”, “software”, And “technology,” Terms That Are Also Defined In The Ear, 15 Cfr 772.1. (b) The Contractor Shall Comply With All Applicable Laws And Regulations Regarding Exportcontrolled Items, Including, But Not Limited To, The Requirement For Contractors To Register With The Department Of State In Accordance With The Itar. The Contractor Shall Consult With The Department Of State Regarding Any Questions Relating To Compliance With The Itar And Shall Consult With The Department Of Commerce Regarding Any Questions Relating To Compliance With The Ear. (c) The Contractor's Responsibility To Comply With All Applicable Laws And Regulations Regarding Export-controlled Items Exists Independent Of, And Is Not Established Or Limited By, The Information Provided By This Clause. (d) Nothing In The Terms Of This Contract Adds, Changes, Supersedes, Or Waives Any Of The Requirements Of Applicable Federal Laws, Executive Orders, And Regulations, Including But Not Limited To— (1) The Export Administration Act Of 1979, As Amended (50 U.s.c.app.2401, Et Seq.); (2) The Arms Export Control Act (22 U.s.c. 2751, Et Seq.); (3) The International Emergency Economic Powers Act (50 U.s.c.1701, Et Seq.); (4) The Export Administration Regulations (15 Cfr Parts 730-774); (5) The International Traffic In Arms Regulations (22 Cfr Parts 120-130); And (6) Executive Order 13222, As Extended; 7. Government Property Availability: Gp (to Include Government Furnished Equipment, Property Or Information Or Contractor Acquired Property), If Applicable, Will Be Identified At The Call Level. If Applicable, The Contractor Is Responsible For All Costs Related To Making The Property Available For Use, Such As Payment Of All Transportation, Installation, Or Rehabilitation Costs In Accordance With Far 45.201(b). if Gp Is Included In The Call Or Requested In The White Paper And/or Proposal, The Following Clauses/provisions Apply: a. Far 52.245-1 Government Property (apr 2012) Or Far 52.245-1, Alt Ii (jan 2017) If The Resulting Contract Is For Basic Or Applied Research At A Nonprofit Institution Of Higher Education Or At A Nonprofit Whose Primary Purpose Is The Conduct Of Scientific Research. b. Far 52.245-9 Use And Charges (apr 2012), c. Dfars 252.211.7007 Reporting Of Government-furnished Property (aug 2012), d. Dfars 252.245-7001 Tagging, Labeling, And Marking Of Government-furnished Property (apr 2012), e. Dfars 252.245-7002 Reporting Loss Of Government Property (apr 2012) f. Dfars 252.245-7003 Contractor Property Management System Administration (apr 2012) g. Dfars252.245-7004 Reporting, Reutilization, And Disposal (sep 2016) 8. Government Furnished Information (gfi) Availability: Gfi, If Applicable, Will Be Identified At The Call Level. If Applicable, Technical Data Or Computer Software Provided To The Contractor As Government-furnished Information (gfi) Under This Contract May Be Subject To Restrictions On Use, Modification, Reproduction,release, Performance, Display, Or Further Disclosure. The Contractor Will Take All Reasonable Steps To Protect The Technical Data Or Computer Software Against Any Unauthorized Release Or Disclosure. Gfi Provided Could Consist Of, But Not Be Limited To, Technical Specifications, Manuals, Drawings, Test Data, And Software. if Gfi Is Included In The Solicitation Or Requested In The Proposal The Following Clauses/provisions Apply: dfars 252.227-7025 Limitations On The Use Or Disclosure Of Government-furnished Information Marked With Restrictive Legends Applies. 9. Base Support/network Access: Base Support/network Access May Be Provided Under Any Resulting Contract And Will Be Specified In The Individual Call. 10. Data Rights: Required Data Rights Will Be Identified Per Call; Minimum Required Data Rights Are: a. Technical Data: Unlimited Rights Or Government Purpose Rights b. Non-commercial Software (ncs): Unlimited Rights Or Government Purpose Rights c. Ncs Documentation: Unlimited Rights Or Government Purpose Rights d. Commercial Computer Software Rights: Customary License, Etc. e. Third Party Software (commercial And Noncommercial) the Air Force Research Laboratory Is Engaged In The Discovery, Development, And Integration Of Warfighting Technologies For Our Air, Space, And Cyberspace Forces. As Such, Rights In Technical Data And Ncs Developed Or Delivered Under This Contract Are Of Significant Concern To The Government. The Government Will Therefore Carefully Consider Any Restrictions On The Use Of Technical Data, Ncs, And Ncs Documentation Which Could Result In Transition Difficulty Or Less-than Full And Open Competition For Subsequent Development Of This Technology. in Exchange For Paying For Development Of The Data, The Government Expects Technical Data, Ncs, And Ncs Documentation Developed Entirely At Government Expense To Be Delivered With Unlimited Rights. technical Data, Ncs, And Ncs Documentation Developed With Mixed Funding Are Expected To Be Delivered With At Least Government Purpose Rights. Offerors Proposing Delivery Of Technical Data, Ncs, Or Ncs Documentation (subject To Government Purpose Rights) Should Fully Explain What Technical Data, Ncs, Or Ncs Documentation (developed With Costs Charged To Indirect Cost Pools And/or Costs Not Allocated To A Government Contract) Will Be Incorporated, How The Incorporation Will Benefit The Program, And Address Whether Those Portions Or Processes Are Able To Be Segregated. The Government Expects Delivery Of Technical Data, Ncs, And Ncs Documentation Subject To Government Purpose Rights Will Fully Meet Program Needs. offers Proposing Delivery Of Technical Data, Ncs, Or Ncs Documentation Subject To Limited Rights, Restricted Rights, Or Specifically Negotiated License Rights Will Be Considered. Proposals Should Fully Explain What Technical Data, Ncs, Or Ncs Documentation Developed With Costs Charged To Indirect Cost Pools And/or Costs Not Allocated To A Government Contract Will Be Incorporated And How The Incorporation Will Benefit The Program. offerors Are Reminded That The Identification And Assertion Of Restrictions On The Government’s Use, Release, Or Disclosure Of Technical Data Or Computer Software (the Assertions List), Required Under Dfars 252.227- 7013 And Dfars 252.227-7014, Is Included In Section K And Due At Time Of Proposals. Assertions Must Be Completed With Specificity With Regard To Each Item, Component, Or Process Listed. note That Dfars 252.227-7014(d) Describes Requirements For Incorporation Of Third Party Computer Software (commercial And Noncommercial). Any Commercial Software To Be Incorporated Into A Deliverable Must Be Clearly Identified In The Proposal. Prior To Delivery Of Any Third Party Software, The Contractor Will Obtain An Appropriate License For The Government, And The Written Approval Of The Contracting Officer. as Used In This Subparagraph, The Terms Unlimited Rights, Government Purpose Rights, Specifically Negotiated License Rights, And Limited Rights In Technical Data Are As Defined In Dfars 252.227-7013. The Terms Unlimited Rights, Government Purpose Rights, Specifically Negotiated License Rights, And Restricted Rights In Noncommercial Computer Software And Noncommercial Software Documentation Are As Defined In Dfars 252.227-7014. The Term Commercial Computer Software Is As Defined In Dfars 252.227-7014. iv. Application And Submission Information No Proposals Or White Papers Should Be Submitted Against This Baseline Baa 1. 1-step And 2-step Procedures: The Application Process For Opportunities Presented In This Baa Will Be Identified In Calls Published Separately From The Overarching Announcement. Each Call Will Identify The Procedure To Accept And Evaluate Offeror Responses (one Step Or Two Step) And If Applicable, Specify A Date And Time For Receipt Of Proposals Or White Papers. Below Is A Description Of One Step And Two Step Procedures For Acceptance And Evaluation Of Offeror Responses: when A One-step Process Is Utilized By The Government, Proposals Submitted In Response To Calls Should Be Submitted In Accordance With This Baa And The Individual Call Instructions. The Government Reserves The Right To Select All, Part, Or None Of The Proposals Received In Response To A Call, Subject To The Availability Of Funds And Without Negotiation/discussion. However, The Government Reserves The Right To Negotiate With Those Offeror(s) Whose Proposal Is Selected For Funding. when A Large Volume Of Responses Are Anticipated By The Government, A Two-step Process Will Be Utilized Requesting White Papers. This Two-step Process Is To Streamline The Proposal Process And To Assist Offerors In Determining Whether To Incur The Cost Of Generating A Formal Call Proposal (not All Calls Will Require A Submittal Of A White Paper). Offerors Of Those White Papers Evaluated As Satisfying Technical Merit Factor (section V, Paragraph 2) And For Which It Is Determined There Is Sufficient Funding Available, Will Be Sent A Letter Request For Proposal (rfp) To Submit A Formal Technical And Cost Proposal. An Rfp Does Not Assure An Offeror Of A Subsequent Contract Award. White Papers Not Selected For Full Proposal Submission Or Proposals Not Selected For Immediate Funding Will Be Disposed Of/destroyed After The Indicated Holding Period For Each Call. 2. Monitoring Government-wide Point Of Entry: Offerors Should Monitor Www.sam.gov Regularly For Any Baa Amendments That May Permit Extensions To The Proposal Submission Date Or Make Other Changes. Offerors Are Advised That Only Contracting Officers Are Legally Authorized To Contractually Bind Or Otherwise Commit The Government. 3. Response Costs: The Cost Of Preparing A Response To Calls Issued Under This Baa Are Not Considered An Allowable Direct Charge To Any Resulting Or Any Other Contract; However, It May Be An Allowable Expense To The Normal Bid And Proposal Indirect Costs As Specified In Far 31.205-18. 4. Submitting Classified Information: Do Not Submit Classified Information In The Proposal. If Necessary, Classified Material Shall Be Submitted As A Separate Addendum. Specific Instructions For Submitting A Classified Addendum, Up To Secret, Will Need To Be Coordinated And Arranged With The Technical Pocs For Each Call Prior To Submission. 5. White Paper Submissions: Content And Form Of Submission For White Papers (2-step Process): The Paragraphs Below Identify White Paper Format And Content. White Papers Should Be Addressed And Delivered As Specified In The Call. a. General Instructions White Papers (2-step Process Only): Offerors Including Data In Their Proposals They Do Not Want Disclosed To The Public For Any Purpose Or Used By The Government Should Mark Restriction On Disclosure And Use Of Data. Technical And Cost Volumes Should Be Submitted As Separate Volumes And Must Be Valid For 180 Days. The White Paper Volumes Must Reference The Baa Number Fa9451-18-s-0002, Call Number, And Title. b. White Paper Format: The Following Format Shall Be Used For Submission Of White Papers In A 2-step Process Unless Otherwise Stated In The Call. i. Page Size: 8 ½ X 11 ii. Microsoft Word Format. iii. Margins – One-inch On Each Side iv. Font - Arial 11+ Point v. Spacing: Single vi. Page Limit: Five Pages Maximum (one-side Only) all Text, Including Text In Tables And Charts, Must Adhere To All Font Size And Line Spacing Requirements Listed Herein. No Hard Copies Of The White Papers Are Requested Unless Otherwise Stated In The Individual Call. c. Instructions For White Paper Content: i. Cover Page (not To Exceed One Page): The White Paper Cover Page Shall Include At A Minimum: Title Of The White Paper; Name Of The Organization Submitting The White Paper; Organization Size; Technical And Contracting Points Of Contact; Telephone Number; Fax; And Email. Additionally, The Cover Page Shall Include Baa And Call Number And Call Title. ii. Technical/business Content (not To Exceed Three Pages): The Technical Content In White Papers Should Capture The Following Information: Innovative And Technically Sound Approach To Accomplish The Call’s Objective(s) And/or Advances In Knowledge, Understanding, Technology, And State-of-the-art. The Cost/business Content (which Includes The Rom) Should Provide Toplevel Details On Major Cost Items Such As Labor, Special Equipment That Must Be Purchased, Materials, And Any Subcontracts Or Other Organizations’ Costs (to Include Government Furnished Facilities, Equipment, Or Personnel) For The Proposed Effort. The Rom Cost Section Shall Not Exceed One Page. iii. Addendum (not To Exceed One Page): Include Biographical Sketches Of The Key Personnel Who Will Perform The Research, Highlighting Their Qualifications And Experience. iv. After The Review Of White Papers, The Government Will Determine Whether A Formal Proposal Will Be Requested Based On The Evaluation Criteria Listed In Section V, White Paper Evaluation Criteria. Offerors Of Those White Papers Evaluated As Satisfying The Technical Merit Factor (section V, Paragraph 2) And For Which It Is Determined There Is Sufficient Funding Available, Will Be Sent A Request For Proposal (rfp) Letter To Submit A Formal Technical And Cost/business Proposal To The Contracting Point Of Contact. An Rfp Does Not Assure An Offeror Of A Subsequent Contract Award. White Papers Not Selected For Full Proposal Submission Or Proposals Not Selected For Immediate Funding Will Be Disposed Of/destroyed After The Indicated Holding Period For Each Call. v. Any Questions Concerning The White Paper Preparation Shall Be Referred To The Technical Or Contracting Pocs Identified In The Call. d. Handling And Transmittal Instructions: Electronic Submission Via Dod Safe Site Or Email Is Required, Specific Instructions Will Be Provided At The Call. Offerors Are Responsible For Confirming Receipt With Afrl/rkdb. Afrl/rkdb Is Not Responsible For Undelivered Documents. 6. Full Proposal Submissions: The Paragraphs Below Identify Proposal Format And Content. Proposals Should Be Addressed And Delivered As Specified In The Call. (note Full Proposal Instructions Apply To 1 And 2-step Processes) a. General Instructions Proposals: Offerors That Including Data In Their Proposals They Do Not Want Disclosed To The Public For Any Purpose Or Used By The Government Should Mark Restriction On Disclosure And Use Of Data. Technical And Cost/business Volumes Should Be Submitted In Separate Volumes, And Must Be Valid For 180 Days. Proposals Must Reference The Baa Announcement Number Fa9451-18-s-0002, Call Number And Title. b. Proposal Format: i. The Technical Proposal Shall Be Limited To 30 Pages Unless Otherwise Stated In The Call And Shall Be Prepared And Submitted In Microsoft Word Format. The Statement Of Work (sow) Does Not Count Against The Page Limit. ii. Cost/business Proposals Have No Page Limitations; However, Offerors Are Requested To Keep Cost Proposals Under 100 Pages (cost Break-outs Should Be Submitted In Microsoft Excel With The Formulas, All Other Information Should Be Provided In Microsoft Word). iii. Paper Size – 8.5 Inch X 11 Inch iv. Margins – One-inch On Each Side v. Font - Arial 11+ Point Font Or Equivalent, To Include Tables, Diagrams, And Charts. Any Other Information (e.g. Captions, Restrictive Markings) Shall Not Be Smaller Than Calibri 10 Point Font Or Equivalent. vi. Pages Shall Be Single-spaced And Double-sided (each Side Counts As One Page) vii. All Text, Including Text In Tables And Charts, Must Adhere To All Font Size And Line Spacing Requirements Listed Herein viii. The Technical Proposal Page Limit Does Not Include The Offeror’s Proposed Sow; However, The Same Formatting Rules Apply To The Sow, Which Is Limited To Ten (10) Pages. note: The Number Of Hard Copies And Submission Instructions Will Be Stated In The Individual Call. c. Technical Volume: The Technical Volume Shall Include A Discussion Of The Following Information: Creative Or Innovative And Technically Sound Approach To Accomplish The Call’s Objective(s) And/or Advances In Knowledge, Understanding, Technology, State-of-the-art, And Rationale Of The Offeror’s Technical Approach And The Relevance To The Directed Energy Directorate/vanguard Center’s Program Objective(s). the Offeror Shall Provide Any Information On Prior Work In The Technical Areas, Descriptions Of Available Equipment, Data And Facilities As Attachments To The Technical Proposal. This Information Will Be Used In The Proposal Evaluation To Help Determine The Soundness Of The Technical Approach. This Volume Shall Include A Sow Detailing The Technical Tasks Proposed To Be Accomplished Under The Proposed Effort. The Offeror Shall Provide A Proposed Sow Suitable For Contract Incorporation Into A Resulting Contract, If Any, And Thus Shall Not Have Any Company Proprietary Information Contained Within The Document. If Government Furnished Property Is Requested, Offerors Are Required To Submit The Following Information With Their Offer: i. A List Or Description Of Government Property The Offeror Or Its Subcontractors Request To Use. The List Shall Identify The Accountable Contract Under Which The Property Is Held And The Authorization For Its Use (from The Contracting Officer Having Cognizance Of The Property). ii. The Dates During Which The Property Will Be Required For Use (including The First, Last, And All Intervening Months), And For Any Property That Will Be Used Concurrently In Performing Two Or More Contracts, The Values Of The Respective Uses In Sufficient Detail To Support Prorating The Rent. iii. The Amount Of Rent That Would Otherwise Be Charged In Accordance With Far 52.245-9, Use And Charges, And Be Used In The Management Of Government Property, Or Existing Property Management Plans, Methods, Practices, Or Procedures For Accounting For Property. iv. The Voluntary Consensus Standard Or Industry Leading Practices And Standards To Be Used In The Management Of Government Property Or Existing Property Management Plans, Methods, Practices, Or Procedures For Accounting For Property. Any Questions Concerning The Technical Volume Or Sow Preparation Shall Be Referred To The Technical Poc Cited In Section Vii. d. Cost/business Volume: i. Separate The Volume Into A Cost Section And Business Section. The Business Section Should Contain All Business Aspects Of The Proposed Contract Such As: Resumes Of Personnel Who Will Be Participating In This Effort; Contractual Instrument Type; Any Exceptions To Terms And Conditions Of The Announcement; And Any Information Not Technically Related. Provide Rationale For Exceptions. Identify Any Technical Data That Will Be Delivered With Less Than Unlimited Rights. Cost Proposals Have No Page Limitations; However, Offerors Are Requested To Keep Cost Proposals Under 100 Pages As A Goal. The Proposal Shall Be Furnished With Supporting Schedules And Shall Contain A Labor Hour Breakdown Per Task. ii. Subcontracting Plans For Efforts Anticipated To Exceed $750,000 Shall Be Submitted Along With The Technical And Cost Proposals. Reference Far 19.704, Dfars 219.704, And Affars 5319.704(a)(1) For Subcontracting Plan Requirements. Small Businesses Are Exempt From This Requirement. iii. All Direct Costs (labor, Material, Travel, Computer, Etc.) As Well As Labor And Overhead Rates Should Be Provided By Contractor Fiscal Year (cfy). A Separate Breakout By Government Fiscal Year (gfy) Is Not Required. iv. Submit Fully-disclosed Electronic Cost Spreadsheets With Formulas. Include Rate Table For All Direct And Indirect Rates That Support The Cost Element Summaries. e. Proposal Content Summary: You May Be Ineligible For Award If All Requirements Of This Solicitation Are Not Met On The Proposal Due Date. Reference Section Viii For A Checklist Of The Requirements. 7. Proposal Submission Dates And Times: Proposals Submitted Shall Be In Accordance With This Announcement And Any Instructions In The Individual Call For Proposals. Proposals Should Be Submitted In Accordance With Any Modifications Or Amendments Of The Full Text Baa And Individual Call. Proposals Received After The Due Date And Time Specified Shall Be Governed By The Provisions Of Far 52.215-1(c)(3). 8. Data Right Assertions: It Is Desired That All Data Delivered Under Any Resulting Award Will Be Delivered With Unlimited Rights; However Different Rights May Be Negotiated As Appropriate. The Offeror Shall Identify Data Rights Assertions, Licenses, Patents, Etc. That Apply To Any Proprietary Materials, Technical Data, Products, Software, Or Processes To Be Used By The Prime Or Subcontractor(s) In The Performance Of This Program. The Proposal Shall Address Acquisition Of Data Rights Or Licenses Or Expected Recoupment Of Development Costs For Those Proprietary Items That Will Be Integral To Any Contracts Awarded Under This Baa. Any Data Delivered Or Anticipated To Be Delivered With Less Than Unlimited Rights Must Be Reported In A Separate, Appropriately Marked Appendix To The Final Report Of Any Awarded Contract Resulting From This Baa. 9. Other Submission Requirements: Proposals Must Be Submitted To The Contracting Point Of Contact Identified At The Call Level. v. Evaluation Criteria And Application Review Information 1. General Information: Evaluations Will Vary Based Upon A One Step Or Two Step Approach. Evaluations Of Proposals/white Papers Will Be Conducted By A Peer Or Scientific Review Process Using The Criteria Described Below. 2. White Paper Evaluation Criteria (two-step Process Only): The Following Criteria Will Be Used To Determine If A Formal Proposal Will Be Requested. The Offeror’s White Paper Must Satisfactorily Addressthe Scientific And/or Technical Merit Factor Identified Below In Order For The Rough Order Of Magnitude (rom) To Be Evaluated For Affordability. White Papers Satisfying Both The Scientific And/technical Merit And Affordability Factors Will Result In A Request For Proposal. a. Technical Merit: Innovative And Technically Sound Approaches Proposed To Accomplish The Technical Objectives And/or Advances In Knowledge; Understanding, Technology, And State-of-the-art b. Affordability: Roms Will Be Evaluated To Determine If Sufficient Funding Is Available. White Papers Satisfying The Technical Merit Factor, And For Which Sufficient Funding Is Determined To Be Available, Will Be Evaluated As Affordable 3. White Paper Selection Process: The Offeror’s White Paper Must Satisfactorily Address The Scientific And/technical Merit Factor And Be Determined To Be Affordable To Result In A Request For Proposal. 4. Proposal Evaluation Criteria (one-step Process): The Following Criteria, Which Is Listed In Descending Order Of Importance, Will Be Used To Determine Whether One Or More Sources Should Be Recommended For Award. The Government Reserves The Right To Select All, Part, Or None Of The Proposals Received In Response To A Call For Award Subject To The Availability Of Funds. a. Technical Merit: Technical Merit Is First In Order Of Priority And Shall Be Evaluated Based On The Following Criteria That Are Of Equal Importance. i. Creative Or Innovative Approach Proposed To Accomplish The Technical Objectives And/or Advances In Knowledge, Understanding, Technology, And State-of-the-art ii. Soundness Of The Offeror’s Technical Approach iii. Relevance Towards Vanguard Center For Hpc Program Objectives b. Cost/price: The Cost/price Criterion Includes The Realism Of The Proposed Cost. Cost/price Is A Substantial Factor, But Ranked As Second Order Priority. (if An Offeror Proposes The Use Of Gfp Other Than Any Gfp Identified In This Baa, And That Proposed Gfp Provides The Offeror An Unfair Competitive Advantage, Then Far 45.202 Requires Rental Equivalent Be Applied To The Cost Factor For Evaluation Purposes Only). 5. Proposal Review And Selection Process (one-step Process): The Technical And Cost/business Proposals Satisfying Both Technical Merit And Cost/price Evaluation Criteria Will Be Categorized: a. Highly Recommended: Well-conceived Scientifically And Technically Sound Proposal Pertinent To Accomplish Goals And Objectives. Proposals Are Recommended For Acceptance (subject To Availability Of Funds) And Normally Are Displaced Only By Other Highly Recommended Proposals. b. Selectable: Scientifically Or Technically Sound Proposals That May Need Additional Development. Proposals Are Recommended For Acceptance If Sufficient Funding Is Available, But At A Lower Priority Than Highly Recommended Proposals. To Ensure A Diversity Of Approaches, A Selectable Proposal May Be Prioritized Over A Highly Recommended Proposal If The Selectable Proposal Presents A Unique Approach Unlike Any Of The Highly Recommended Proposals. c. Not Selectable: Proposal Is Not Technically Sound Or Does Not Meet Agency Needs. Even If Sufficient Funding Existed, The Proposal Will Not Be Funded. note: Prior To Award Of A Potentially Successful Offer, The Contracting Officer Will Make A Determination Regarding Price Reasonableness. note: When The Government Elects To Award Only Part Of A Proposal, The Selected Part May Be Categorized As Highly Recommended Or Selectable Although The Proposal As A Whole May Not Merit Such A Categorization. vi. Award Administration Information award Notices: Offerors Will Be Notified Whether Their Proposal Is Recommended For Award In Writing By Letter. The Notification Of Recommendation For Award Is Not To Be Construed To Mean The Award Of A Contract Is Assured As Availability Of Funds And Successful Negotiations Are Prerequisites To Any Award. vii. Agency Contacts 1. Technical Points Of Contact: Any Correspondence Must Reference The Baa Title And Number. Questions Of A Technical Nature Shall Be Directed To The Following Technical Points Of Contact: program Manager: Usaf Capt. Alexandra A. Mihaylova,afrl/rdsme, Kihei, Hi 96753’ Phone: (808)-891-7704, Email: Alexandra.mihaylova.1@us.af.mil technical Director:usaf Lt. Col. Scott Pierce, Afrl/rdsme, Kihei, Hi, Phone: (808)891-7744, Email: Scott.pierce.2@us.af.mil. 2. Contracting Points Of Contact:questions Of A Contractual/business Nature Shall Be Directed To The Contracting Officer Or Contract Specialist Specified In The Contact Information Below. note: Each Call Will Also Include Specific Technical And Contracting Points Of Contact. 3. Ombudsman: The Ombudsman Clause, Affars 5352.201-9101 Ombudsman (jan 2017) Will Be Contained In Any Contracts Or Agreements Resulting From This Solicitation. the Afrl Ombudsman Is: Director Of Contracting, Afrl/pk 1864 Fourth Street. Wright-patterson Afb Oh 45433-7130, Phone 937-904-9700 alternate Ombudsman: Deputy Director Of Contracting, Afrl/pk 1864 Fourth Street, Wright Patterson Afb, Oh 45433- 7130, Phone 937-255-4967 viii. Other Information 1. Support Contractors: a. The Air Force Research Laboratory's Directed Energy (rd) And Space Vehicles (rv) Directorates Have Contracted For Various Business And Staff Support Services, Some Of Which Require Contractors To Obtain Administrative Access To Proprietary Information Submitted By Other Contractors. Administrative Access Is Defined As "handling Or Having Physical Control Over Information For The Sole Purpose Of Accomplishing The Administrative Functions Specified In This Contract Or Order, Which Do Not Require The Review, Reading, Or Comprehension Of The Content Of The Information On The Part Of Non-technical Professionals Assigned To Accomplish The Specified Administrative Tasks." b. The Required Administrative Access Will Be Granted To Non-technical Professionals. Examples Of The Administrative Tasks Performed Include: I. Assembling And Organizing Information For R&d Case Files; Ii. Accessing Library Files For Use By Government Personnel In The Rd And Rv Directorates c. Offerors Shall Provide Written Objection To Administrative Access. Any Objection To Administrative Access: I. Shall Be Provided In Writing To The Contracting Officer Within 10 Days Of Rfp ( Baa, Etc., As Appropriate) Issuance; And Ii. Shall Include A Detailed Statement Of The Basis For The Objection. 2. Communication: Dialogue Between Prospective Offerors And Government Representatives Is Encouraged Until Submission Of Proposals. Discussions With Any Of The Points Of Contact Shall Not Constitute A Commitment By The Government To Subsequently Fund Or Award Any Proposed Effort. Only Contracting Officers Are Legally Authorized To Commit The Government. 3. Debriefings: Debriefings Will Be In Accordance With 10 Usc 2305(b)(5), But The Debriefing Content Will Vary To Be Consistent With The Procedures Set Out In Far 35.016 Governing Baas. 4. Wide Area Work Flow Notice: Any Far-based Contract Award Resulting From This Announcement Will Contain The Clause At Dfars 252.232-7003, Electronic Submission Of Payment Requests And Receiving Reports (jun 2012), Which Requires Electronic Submission Of All Payment Requests. The Clause Cites Three Possible Electronic Formats Through Which To Submit Electronic Payment Requests. Effective 01 October 2006, The Department Of Defense Adopted Wide Area Work Flow-receipt And Acceptance (wawf-ra) As The Electronic Format For Submission Of Electronic Payment Requests. Any Contract Resulting From This Announcement Will Establish A Requirement To Use Wawf-ra For Invoicing And Receipt/acceptance And Provide Coding Instructions Applicable To This Contract. Contractors Are Encouraged To Take Advantage Of Available Training (both Web-based And Through Your Cognizant Dcma Office) And To Register In The Wawf-ra System. Information Regarding Wawf-ra, Including The Web-based Training And Registration, Can Be Found At Https://wawf.eb.mil/. Note: Wawf-ra Requirement Does Not Apply To Universities That Are Audited By An Agency Other Than Dcaa. 5. Forward Pricing Rate Agreements: Offerors Who Have Forward Pricing Rate Agreements (fpras) And Forward Pricing Rate Recommendations (fprrs) Should Identify Them In Their Proposal. 6. Pre-award Clearance: Pursuant To Far 22.805, A Pre-award Clearance Must Be Obtained From The U.s. Department Of Labor, Employment Standards Administration, Office Of Federal Contract Compliance Program’s (ofccp) Prior To Award Of A Contract (or Subcontract) Of $10,000,000 Or More Unless The Contractor Is Listed In Ofccp’s National Pre-award Registry Http://www.dol-esa.gov/preaward. This Registry Indicates The Contractor Has Been Found To Be “in Compliance” Within The Past Two Years With The Equal Employment Opportunity (eeo) Regulations The Ofccp Is Mandated To Enforce. The Registry Is Updated Nightly; Facilities Reviewed More Than Two Years Ago Are Removed And New Ones Are Added. Award May Be Delayed If You Are Not Currently Listed In The Registry And The Contracting Officer Must Request A Pre-award Clearance From The Ofccp. 7. Limitations On Pass-through Charges: As Prescribed In Far 15.408(n)(1) & 15.408(n)(2), Provisions 52.215-22, “limitations On Pass Through Charges – Identification Of Subcontract Effort (oct 2009),” And 52.215-23, “limitations On Pass-through Charges (oct 2009),” Are Contained In This Solicitation. Any Contract Valued Greater Than The Threshold For Cost Or Pricing Data Threshold, Except Fixed Price Contracts Awarded On The Basis Of Adequate Price Competition Resulting From This Solicitation, Shall Contain The Clause At Far 52.215-23 (or Alt I). 8. Associate Contractor Agreements: Associate Contractor Agreements (acas) Are Agreements Between Contractors Working On Government Contracts That Specify Requirements For Them To Share Information, Data, Technical Knowledge, Expertise, Or Resources. The Contracting Officer May Require Acas When Contractors Working On Separate Government Contracts Must Cooperate, Share Resources, Or Otherwise Jointly Participate In Working On Contracts Or Projects. Prime Contractor To Subcontractor Relationships Do Not Constitute Acas. For Each Award, The Contracting Officer Will Identify Associate Contractors With Whom Agreements Are Required. 9. Post-award Small Business Program Representation: As Prescribed In Far 19.308, Far Clause 52.219-28, “post-award Small Business Program Representation (jul 2013),” Is Incorporated Byreference In This Solicitation. This Clause Will Be Contained In Any Contracts Resulting From This Solicitation. This Clause Requires A Contractor To Represent Its Size Status When Certain Conditions Apply. The Clause Provides Detail On When The Representation Must Be Complete And What The Contractor Must Do When A Representation Is Required. 10. Employment Eligibility Verification: As Prescribed By Far 22.1803, Far Clause 52.222-54, Employment Eligibility Verification (oct 2015), Is Hereby Incorporated By Reference In This Solicitation. Any Contract Awarded As A Result Of This Baa That Is Above The Simplified Acquisition Threshold And Contains A Period Of Performance Greater Than 120 Days Shall Include This Clause. This Clause Provides The Requirement For Contractors To Enroll As A Federal Contractor In The E-verify Program Within 30 Days After Contract Award. 11. Reporting Executive Compensation And First-tier Sub-contract/sub-recipient Awards: As Prescribed By Far 4.1403(a), Far 52.204-10 Reporting Executive Compensation And First-tier Subcontract Awards (oct 2016) Is Hereby Incorporated By Reference In This Solicitation. Any Contract Valued At $25,000 Or More, Excluding Classified Contracts Or Contractors With Individuals, Must Contain This Clause. Any Grant Or Agreement Award Resulting From This Announcement May Contain The Award Term Set Forth In 2 Cfr, Appendix A To Part 25. 12. Updates Of Publicly Available Information Regarding Responsibility Matters: Any Contract Award That Exceeds $500,000.00; And When An Offeror Checked “has” In Paragraph (b) Of The Provision Far 52.209-7, Shall Contain The Clause/article, Far 52.209-9 Updates Of Publicly Available Information Regarding Responsibility Matters (jan 2013). 13. Contractor Business Systems: Dfars 252.242-7005, Contractor Business Systems (feb 2012), Is Hereby Incorporated By Reference. 14. Proposal Content Checklist: You May Be Ineligible For Award If All Requirements Of This Solicitation Are Not Met On The Proposal Due Date. a. Proposals Are Due To The Point Of Contact Specified On The Call. b. Proposals Are Due No Later Than The Due Date And Time Specified In The Call. c. Proposal Page Limits Are Strictly Enforced. See Section Iv Of The Solicitation For Page Limits. d. Completed Certifications And Representations (section K) Are Due With The Proposal. Certifications And Representations (section K) Can Be Found At Www.sam.gov. e. The Cost/business Proposal Must Contain All Information Described In The Content And Form Of Proposal Section. f. For Any Subcontracts Proposed, The Cost/business Proposal Must Contain A Subcontractor Analysis Iaw Far 15.404-3(b). g. Offerors Other Than Small Businesses Are To Include A Subcontracting Plan In Microsoft Word Readable Or Adobe Format On A Cd Rom As Well As A Hard Copy. h. Proposals Must Be Submitted In The Format Specified In Section Iv. i. Offerors Who Have Forward Pricing Rate Agreements (fpra’s) And Forward Pricing Rate Recommendations (fprr’s) Should Submit Them With Their Proposal. j. If A Dd254 Is Applicable, Offerors Must Verify Their Cognizant Security Office Information Is Current With Defense Security Service (dss) At Www.dss.mil.