Transport Tenders

Purchaser Name: Soci t De Transport D Hydrocarbures Par Pipes Lines | Subscription to Sotrapil insurance contracts

Details: Description The Local Government Unit Of General Santos City, Through The General Fund Cy 2024 Intends To Apply The Sum Of Ten Million And Xx / 100 Pesos Only (10,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 24cb Gsc 577 Procurement Of Event Management Company For The Conduct Of City Festivals Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Invitation To Bid For Procurement Of Event Management Company For The Conduct Of City Festivals Republic Of The Philippines Local Government Unit Of General Santos City Bids And Awards Committee Goods And Consultancy Services City Hall, General Santos City Total Description Of Articles Item No. 1. Procurement Of Event Management Company For The Conduct Of City Festivals Procurement Of Event Management Company For The Conduct Of Paskuhan Sa Gensan 2024 Scope Of Work/deliverables December 6 (tentative) – Lighting Ceremony With Performance Of Local Talents, Lighting Of All Christmas Lanterns And Decorations, Liwanag Giant Parol Competition And 5 To 8 Minute Pyromusical. December 11 Opening Ceremonies With Float Parade, Variety Show From Local Talents, Todacares Tricylaban Contest, Facilitation Of Enrolled Events, 8 To 10 Minute Pyromusical And Local Artist Performance December 12 Christmas Sports Competition, Rondallawit, Inter School Christmas Dance Competition, Facilitation Of Enrolled Events And Local Artist Performance December 13 Christmas Sports Competition, Drum & Lyre Competition, Facilitation Of Enrolled Events, Christmas And Local Artist Performance December 14 Christmas Sports Competition, Christmas Zumbarangay, Facilitation Of Enrolled Events, And Local Artist Performance December 15 Christmas Sports Competition, Closing Ceremony With Extravaganza Show, Awarding Ceremony, 8 To 10 Minute Pyromusical And Local Artist Performance The Scope Includes Event Planning, Artist Coordination, Full Stage Venue Setup With Outstanding Lights And Sound, Adequate Led Walls, Marketing, Security, And Post Event Evaluation. Deliverables I. Event Schedule And Program Ii. Marketing And Promotional Materials Iii. Infrastructure Setup (stages, Lights, Sounds, Led Walls, Booths, Etc.) Appropriate To Christmas Decorations. Iv. Security Of The Artists And Emergency Plans V. Final Report Documenting The Event’s Outcomes And Impact Vi. Artist And Performer Management Vii. Partnership Coordination Viii. Volunteer Management Ix. Environmental Sustainability Initiatives X. Audience Engagement And Interactive Activities Xi. Logistics And Transportation Xii. Technical Setup And Support These Deliverables Ensure A Comprehensive Approach To Planning, Executing, And Evaluating The Paskuhan Sa Gensan 2024, Contributing To Its Success And Long Term Impact. Timeframe 10,000,000.00 Page 2 Of 5 24cb Gsc 577 *24cb Gsc 577* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. Festival Dates: December 6, 11 To 15, 2024 Roles And Responsibilities A. Festival Director: Oversees Overall Planning And Execution And Duly Delegated By The Local Chief Executive. B. Entertainment Service Provider: 5 Consecutive Nights Forty Five (45) To Sixty (60) Minute Performances Set To The Best Of The Artist’s Abilities. Conduct A Proper Sound Check Earlier In The Day For Up To Two Hours. C. Artist Management/liaison: Be The Main Point Of Contact/liaison Between The Artist, Companies, And Venues For Inquiries. Support Local Relations About Contract And Technical Requirements, Redirect As Appropriate, And Arrange Itineraries, Travel, Ground Transfers, Accommodation, Freight, Dressing Room Requirements, Catering, And Riders In Line With Contract Arrangements. D. Event Coordinators: Manage Specific Events Such As Concerts, Sports Events, And Exhibitions. E. Marketing Team: Handles Promotion And Publicity. To Include But Not Limited To The Following: Event Branding Aligned With The Event Theme Social Media Event Page Management Event Hashtag And Teaser Campaigns Digital Teaser Campaigns Pre Event Video Teasers Festival Photo Documentation Festival Video Production Tv And Radio Broadcasting F. Logistics Team: Manages Infrastructure Setup, Security, And Emergency Plans. G. Volunteer Coordinator: Manages Volunteer Workforce And Assignments. H. External Relations: Handles Relationships With Partners. I. Artist And Performer Liaison: Manages Relationships With Artists And Performers. J. Technical Director: Oversees Technical Aspects Such As Audio Visual And Lighting. K. Media Relations Officer: Manages Interactions With Media Outlets. L. Community Engagement Coordinator: Facilitates Involvement With Local Community. M. Sustainability Manager: Ensures Environmental Responsibility And Sustainability. N. Hospitality Manager: Manages Accommodation And Hospitality For Guests And Vips. O. Program Designer: Develops The Festival's Schedule And Program Content. P. It Support Team: Manages The Festival's It Infrastructure And Support. Resources To Be Managed And To Be Provided Venues (public Parks, Streets, Indoor And Outdoor Facilities) Equipment (stages, Lights, Sound Systems, Led Walls, Tents) Marketing Materials (banners, Flyers, Social Media Ads) Security Personnel For Artists And Emergency Services Artist And Performer Fees Transportation And Accommodation For Guest Artists And Vips Catering Services For Events And Vips Sanitation And Waste Management Services Volunteer Workforce And Coordination Materials (marshalls) Miscellaneous Supplies (decorations, Event Merchandise) Logistics And Transportation (vehicle Rentals And Logistics For Transporting Equipment And Materials, Shuttle Services For Attendees, If Applicable.) Insurance And Permits (event Insurance Coverage For Liability And Property Damage, Necessary Permits And Licenses For Events And Activities.) Technology And It Support (it Infrastructure, Including Internet Connectivity And Technical Support) Communication Systems (two Way Radios And Communication Systems For Staff Coordination) Environmental Sustainability Initiatives (environmental Sustainability Initiatives, Programs To Minimize The Environmental Impact Of The Festival) Contingency Funds (reserve Funds For Unexpected Expenses And Emergencies, Budget Flexibility To Address Unforeseen Challenges) Program Development And Design (professional Services For Designing And Developing Event Programs) Stakeholder Engagement And Partnership Management (resources For Managing Relationships With Sponsors, Partners, And Stakeholders) Feedback And Evaluation Tools (systems For Collecting And Analyzing Attendee Feedback) Bidders Qualification *note: Please Include R.a 9184 Page 3 Of 5 24cb Gsc 577 *24cb Gsc 577* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. The Local Government Unit Of General Santos City Now Invites Bids For The Supplies And Delivery Of Procurement Of Event Management Company For The Conduct Of City Festivals. Delivery Of The Goods Is Required On The Day Of Activity. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders) Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non Discretionary "pass/fail" Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. Prospective Bidders May Obtain Further Information From Local Government Unit Of General Santos City And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00 Am To 5:00 Pm Except On Holidays. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting November 12, 2024 12:00 Noon From The Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Either In Person, By Facsimile, Or Through Electronic Means. The Local Government Unit Of General Santos Will Hold A Pre Bid Conference On 11/19/2024 2:00:00pm At Bids And Awards Committee Office 4th Floor, Left Wing, City Action Investment Center, General Santos City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 2, 2024 12:00 Pm. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On December 2, 2024 2:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders Representatives Who Choose To Attend The Activity. Page 4 Of 5 24cb Gsc 577 *24cb Gsc 577* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production The Local Government Unit Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: _______________________________ Atty. Francisco M. Gacal Chairperson, Bac Goods And Consulting Services

Details: Title: Mehrspur Zürich – Winterthur (voieplus Zurich - Winterthur), Partie De Projet 240 Eg (entrepreneur Général) Gros Œuvre Du Tunnel, Travaux De Génie Civil description: Dans Le Cadre Du Projet «mehrspur Zürich–winterthur», La Confédération Et Les Cff Prévoient Une Nouvelle Ligne À Double Voie À Travers Le Tunnel De Brütten Ainsi Que L’aménagement Des Gares De Dietlikon, Bassersdorf, Wallisellen Et Winterthur Töss. Ces Travaux Permettront De Supprimer L’actuel Goulet D’étranglement Qui Affecte Le Réseau Ferroviaire Entre Zurich Et Winterthour, Et De Mener À Bien Le Réaménagement Nécessaire De L’offre. La Pièce Maîtresse Pour Répondre À La Contrainte De Capacité Entre Zurich Et Winterthour Est Le Tunnel De Brütten De Quelque 8,3 Km Et La Bifurcation D’environ 1 Km Vers L’aéroport De Zurich. Pour Ce Doublement Souterrain De La Voie, Un Tunnel À Voie Unique D’un Diamètre Intérieur D’environ 8,3 M Sera Construit Dans Chaque Sens. Un Accès Au Tunnel Sera Disponible Au Nord De La Gare De Dietlikon Et Un Autre À L’est De La Gare De Bassersdorf. Ils Se Rejoindront Sous Terre Au Niveau De La Bifurcation De Mülberg Et Referont Surface Avant Winterthour, Au Niveau De Tössmühle, Dans Un Ouvrage De Portail Franchissant La Kempt. Les Deux Tunnels À Voie Unique Seront Reliés Par Vingt Connexions Transversales Espacées De 500 M Au Plus. En Cas D’événement, Celles-ci Permettront Aux Voyageurs De Se Mettre À L’abri En Passant Dans Le Tube Opposé. Aux Trois Points Au Sol, Les Connexions Transversales Seront De Surcroît Combinées À Des Bâtiments Ferroviaires Permettant Un Accès Depuis La Surface. Un Complément D’information Est Proposé Sur La Page Officielle Du Projet: Https://company.sbb.ch/de/ueber-die-sbb/projekte/deutschschweiz/region-zuerich/bauprojekte-region-winterthur/zuerich-winterthur-bruettenertunnel.html?tracking-marketingurl=mehrspur (mehrspur Zürich–winterthur: Bahnausbau Via Brüttenertunnel | Sbb ) La Construction Du Tunnel Entre Dietlikon Et Winterthour Se Fera Essentiellement Au Moyen D’un Tunnelier À Partir Du Site De Montage Du Portail De Dietlikon Au Sud, Sur Une Longueur D’environ 2 X 8000 M. Les Deux Tunnels Ferroviaires De La Zone De Tunnel De Bassersdorf Seront Creusés À Partir Du Site De Montage De Bassersdorf Sur 600 Ou 700 M. La Liaison Entre Les Trois Zones De Tunnel De Dietlikon, Winterthour Et Bassersdorf Est Assurée Par La Zone De Tunnel De Mülberg Via Deux Ouvrages De Bifurcation Souterrains. Les Travaux De Construction Suivants Doivent Être Réalisés Pour La Construction De L'ensemble Du Tunnel: - Travaux De Génie Civil Spéciaux * Palplanches * Pieux Forés * Parois Moulées * Parois Clouées * Paroi Berlinoise * Tirant D’ancrage Tendues * Amélioration Du Sous-sol - Génie Civil - Ingénierie Des Structures - Démantèlement - Travaux Souterraines * Avancement Et Sécurisation - Tbm, Sm, Muf, Mul * Étanchement * Travaux De Habiilage * Aménagement Intérieur De Tunnel * Production De Cuvelage - Aménagement Hydraulique Du Geilikerbach - Gestion Des Matériaux Avec Entrepôt Intermédiaire, Installation De Convoyeurs, Gare De Chargement Et Chargement Ferroviaire - Aménagement Paysager Le Passage De La Pleine Voie Aux Zones De Tunnel S’effectuera Aux Trois Portails À L’aide De Rampes Et De Tunnels En Tranchée Ouverte Créés Dans Les Terrassements. Le Début Des Travaux Pour La Partie De Projet 240 Est Prévu En 2027 Et Une Période De Construction Principale D’environ Cinq Ans Est Mise À Disposition. Une Phase Avor (préparation Du Travail) Avant Le Début Des Travaux De Construction Proprement Dits Est Prise En Compte. Avec La Phase Avor Et Le Temps Nécessaire À L'achèvement Des Travaux, On Dispose D'une Durée Totale De Construction D'environ 8 Ans. Pour La Partie De Projet 240 De La Section 2 Tunnel De Brütten Du Grand Projet «mehrspur Zürich–winterthur», Les Cff Recherchent Un Entrepreneur Général (eg) Chargé Du Gros Œuvre, C’est-à-dire Principalement Pour Les Prestations Suivantes: Travaux De Génie Civil Spéciaux, Génie Civil Et Construction Du Tunnel. Il Sera Confié À Cet Eg De Gros Œuvre La Seule Construction Des Ouvrages (gros Œuvre) Et Celui-ci Se Portera Garant Des Coûts, Des Délais Et De La Qualité Requise, Hors Technique Ferroviaire Et Équipement. Les Transports Et La Valorisation Des Déblais Ne Font Pas Partie De Cette Procédure D'acquisition. Avec L'appel D'offres, Un Modèle 3d Du Gros Œuvre Est Notamment Mis À La Disposition De L'entreprise Générale De Construction De Tunnels Et Des Plans D'appel D'offres Complémentaires Lui Sont Remis. L’appel D’offres Implique Un Contrat À Prix Unitaire Incluant L’utilisation Du Catalogue Can. Lors De L’exécution, Les Planificateurs Mandatés Par Les Cff Assurent La Planification Et L’étude De Projet En Détaillant Les Modèle 3d Du Gros Œuvre Mises À Disposition Avec L’appel D’offres. Au Début Du Projet, Les Parties Impliquées Dans La Réalisation Du Tunnel De Brütten Chargé Du Gros Œuvre, Planificateur Et Cff Définissent Ensemble Les Éléments De Construction Nécessitant Des Plans D’exécution Et Ceux Pour Lesquels L’eg De Gros Œuvre Disposera De Le Modèle 3d Du Gros Œuvre En Place Et Lieu De Plans. L’objectif Fondamental Du Planificateur Et Des Cff Consiste, Dès Que Cela Est Possible Et Justifié, À Travailler Avec Le Modèle 3d Du Gros Œuvre Et À Réduire Le Recours Aux Plans D’exécution. Cette Décision Sera Examinée Chaque Trimestre Et Adaptée Suivant Les B

Details: Description Medical Oxygen Tank (w/ Content) Size: Height 79 Cm X Diameter 13 Cm Capacity 10 Liters Cordless Sabre Saw Type: Cordless Sabre Saw (reciprocating Saw) Voltage: 18v Battery Type: Lithium-ion Stroke Length: 28 Mm Cutting Speed: Up To 0-3000 Strokes Per Minute (spm) Cutting Capacity: Wood: Up To 200 Mm Metal: Up To 10 Mm Weight: Approximately 3 Kg (may Vary By Model) Blade Type: Compatible With Standard Sabre Saw Blades Tool-less Blade Change: Yes Variable Speed Control: Yes Led Work Light: Yes Vibration Control: Yes 18v Battery Voltage: 18v Battery Type: Lithium-ion Capacity: Available In Various Amp-hour (ah) Ratings, Commonly: 2.0 Ah 4.0 Ah 5.0 Ah 8.0 Ah Dimensions: Varies By Capacity, Generally Compact And Lightweight Weight: Varies Based On Capacity: 2.0 Ah: Approximately 0.6 Kg 4.0 Ah: Approximately 1.1 Kg 5.0 Ah: Approximately 1.2 Kg 8.0 Ah: Approximately 1.5 Kg Tripod Stand Height Adjustment: Minimum Height: Approximately 65 Cm (25.6 Inches) Maximum Height: Approximately 160 Cm (63 Inches) Adjustment Mechanism: Quick-release Clamps For Easy Height Adjustment. Material: Construction: Sturdy Aluminum For Lightweight Durability. Weight: Approximately 2.4 Kg (5.3 Lbs.), Making It Portable Yet Stable. Base: Legs: Three Adjustable Legs For Stability On Uneven Surfaces. Foot Design: Equipped With Rubber Feet For Traction, With Some Models Having Spikes For Soft Ground. Compatibility: Compatible With Various Bosch Laser Levels And Other Surveying Instruments Featuring A Standard 1/4-inch Or 5/8-inch Mounting Thread. Foldable Design: Easily Folds For Convenient Storage And Transport. Load Capacity: Supports Tools Weighing Up To 5 Kg (11 Lbs.), Suitable For Various Laser Levels And Equipment. Storage And Carrying: Typically Comes With A Carrying Case For Easy Transportation. Sabre Saw Power Supply: Battery Voltage: 12v Motor: Power Output: Approximately 500 W (equivalent To Performance Level) No-load Stroke Rate: Up To 0 2,200 Strokes Per Minute (spm) Stroke Length: Stroke Length: Approximately 20 Mm Cutting Capacity: Wood: Up To 120 Mm Metal: Up To 10 Mm Blade Type: Compatible With Standard Sabre Saw Blades For Various Materials. Weight: Approximately 1.5 Kg (without Battery), Making It Lightweight And Easy To Handle. Design Features: Ergonomic Handle: Designed For Comfort And Reduced Fatigue During Extended Use. Tool-less Blade Change: Quick And Easy Blade Changes Without Additional Tools. Led Light: Integrated Led Work Light For Improved Visibility In Dark Or Confined Spaces. Vibration Control: Features To Reduce Vibration For Enhanced User Comfort. Battery And Charging: Compatible With Bosch 12v Lithium-ion Batteries. Battery And Charger Typically Sold Separately. Cordless Blower Battery Voltage: 18v Motor Type: Brushless Motor Air Speed: Up To 200 Km/h (approximately 124 Mph) Air Volume: Up To 200 M³/h (approximately 118.9 Cfm) Weight: Approximately 3.5 Kg (7.7 Lbs) Without Battery Noise Level: Approximately 90 Db(a) Vibration Level: Typically Low, Around 2.5 M/s² Battery Compatibility: Compatible With Bosch 18v Lithium-ion Batteries Charging Time: Depending On The Battery Charger Used, Typically Around 1 Hour For Standard Batteries. Sds & Shank Flak 14x250mm Shank Size: 14 Mm Diameter Length: 250 Mm (may Include Total Length Of The Shank And Working Part) Material: Typically, High-speed Steel (hss) Or Carbide-tipped For Durability Application: Suitable For Drilling Into Concrete, Brick, And Masonry Flute Design: Spiral Flute Design For Efficient Debris Removal Working End: May Have A Chiseling Or Cutting Tip Designed For Heavy-duty Applications Drill Bit Metal (1.5) Cobalt & Metal (2.5) Cobalt & Metal (6.5) Cobalt & Metal (8.0) Cobalt & Metal (3.0) Cobalt & Metal (10) Cobalt & Metal Material: Cobalt High-speed Steel (hss) For Enhanced Durability And Heat Resistance. Tip Angle: 135° Split Point For Faster Penetration And Reduced Walking. Sizes: Available In Various Sizes, Often Ranging From 1 Mm To 13 Mm In Diameter. Coating: Typically, Uncoated Or May Have A Titanium Or Nitride Coating For Additional Wear Resistance. Usage: Ideal For Drilling In Stainless Steel, Alloy Steel, And Other Hard Metals. Flute Design: Spiral Flute Design For Efficient Chip Removal And Improved Cutting Performance. Shank Type: Usually Available In Both Standard And Reduced Shank Sizes For Compatibility With Various Drills. Drill Bit Metal (7.0) (4.0) Material: Cobalt High-speed Steel (hss) With 5% To 8% Cobalt Content For Increased Strength And Heat Resistance. Tip Design: Point Angle: 135° Split Point Design For Improved Penetration And Reduced Walking On Metal Surfaces. Tip Type: Available In Standard, Taper, Or Other Configurations Depending On The Specific Drill Bit Model. Sizes: Available In A Wide Range Of Diameters, Commonly From 1 Mm To 13 Mm Or Larger, Catering To Various Drilling Needs. Coating: Typically, Uncoated Or With A Titanium Or Nitride Coating To Enhance Wear Resistance And Reduce Friction. Usage: Ideal For Drilling In Tough Metals Such As Stainless Steel, Tool Steel, And Other High-strength Alloys. Flute Design: Spiral Flute Design For Effective Chip Removal And Reduced Heat Buildup During Drilling. Flutes Often Designed To Help With Cooling, Enhancing Performance During Extended Use. Shank Type: Generally, Comes In Standard Round Shanks For Compatibility With Most Drill Chucks. Drill Bit Metal (6.5) Multi 6mm Material: Made From High Speed Steel (hss) With A Titanium Coating For Enhanced Durability And Wear Resistance. Diameter: Size: 6.5 Mm (this Is The Nominal Diameter Of The Drill Bit). Tip Design: Point Angle: Typically Features A 118° Or 135° Split Point Design For Efficient Penetration And Reduced Walking On Surfaces. Designed For Multi-material Applications, Including Metal, Wood, Masonry, And Plastic. Flute Design: Spiral Flute Design: Provides Effective Chip Removal And Cooling, Enhancing Performance During Drilling. Shank Type: Standard Round Shank: Compatible With Most Drills And Drill Chucks. Usage: Suitable For Drilling In Various Materials, Including: Metal (mild Steel, Aluminum) Wood Masonry (brick, Concrete) Plastics Designed For Versatility In Diy And Professional Applications. Performance Features: Durability: Engineered For Long Life, Even In Tough Applications. Precision: Provides Accurate Drilling With Minimal Burr Formation. Versatility: Can Be Used For A Wide Range Of Materials, Making It A Great All-purpose Drill Bit. Packaging: Often Available In Blister Packs Or Sets, With Clear Labeling For Easy Identification Of Size And Type. Drill Bit Mason (7.0) Drill Bit Mason (8.0) Drill Bit Mason (4.0) Drill Bit Mason (3.0) Drill Bit Mason (10) Material: Typically Made From Carbide-tipped Steel Or High Speed Steel (hss) For Durability And Strength. Diameter: Size: 7.0 Mm (nominal Diameter Of The Drill Bit). Tip Design: Tip Type: Usually Features A Carbide Tip Designed Specifically For Masonry Applications, Which Provides Excellent Cutting Performance. Point Angle: Often Has A Sharp Point Designed For Effective Penetration Into Hard Materials. Flute Design: Spiral Flute Design: Helps In The Efficient Removal Of Debris While Drilling, Which Is Crucial For Maintaining Cutting Efficiency. Cooling: The Flute Design May Aid In Heat Dissipation During Drilling. Shank Type: Sds Plus Or Standard Round Shank: Depending On The Model, It May Have An Sds Shank For Compatibility With Rotary Hammers Or A Standard Round Shank For Use In Regular Drills. Usage: Designed For Drilling Into: Masonry: Brick, Concrete, And Stone. Other Hard Materials: Ideal For Use In Construction And Renovation Projects. Performance Features: Durability: Built To Withstand High-impact Drilling In Tough Materials, Ensuring A Longer Lifespan. Precision: Provides Clean Holes With Minimal Breakout Or Chipping In Masonry Surfaces. Packaging: Usually Available In Individual Packaging Or Sets, Clearly Labeled For Easy Identification Of Size And Type. Impact Drill Power: Voltage: 18v Battery Type: Lithium-ion Battery Capacity: Typically, 2.0 Ah Or 4.0 Ah (depending On The Version). Motor: Power Output: 600 W (approximate) Speed: No-load Speed: 0 - 1,700 Rpm (depending On The Gear Setting) Impact Rate: Up To 27,000 Blows Per Minute. Torque: Max Torque: Soft Torque: 30 Nm Hard Torque: 50 Nm Torque Settings: 20+1 Adjustable Torque Settings For Precise Control. Drilling Capacity: Wood: Up To 35 Mm Steel: Up To 13 Mm Masonry: Up To 20 Mm Chuck: Chuck Type: Keyless Chuck Chuck Capacity: 1.5 – 13 Mm Weight: Tool Weight: Approximately 1.6 Kg (without Battery). Dimensions: Length: 215 Mm Height: 235 Mm Width: 60 Mm Features: Compact Design: Lightweight And Compact For Easy Handling And Maneuverability. Led Light: Integrated Led Light For Better Visibility In Dark Areas. Electronic Motor Protection (emp): Prevents Overheating And Extends The Tool's Lifespan. Soft Grip: Ergonomic Handle For Comfort During Prolonged Use. Two-speed Gearbox: For Versatile Drilling And Screwing Applications. Applications: Suitable For Drilling And Screwdriving In Various Materials, Including Wood, Metal, And Masonry. Ideal For Both Professional And Diy Applications. Max Cutting Capacity 42mm (pvc) Material: Typically Made From High Speed Steel (hss) Or Carbide Tipped For Enhanced Durability And Cutting Performance In Plastic Materials. Diameter: Max Cutting Capacity: 42 Mm (this Refers To The Maximum Diameter The Drill Bit Can Effectively Cut). Tip Design: Point Type: Often Features A Brad Point Or Split Point Design For Precise Drilling Without Wandering. Tip Angle: Designed Specifically For Optimal Cutting Through Pvc And Other Plastics. Flute Design: Flute Type: Usually, Spiral Flutes Designed To Facilitate Efficient Chip Removal, Reducing Clogging While Drilling. Cooling Features: May Include Design Elements That Help Dissipate Heat, Which Is Important When Drilling Through Plastics To Prevent Melting. Shank Type: Shank Design: Commonly Features A Standard Round Shank For Compatibility With Most Drill Chucks. Usage: Specifically Designed For Drilling Into Pvc, But Can Also Be Used On Other Plastics And Softer Materials. Ideal For Applications In Plumbing, Construction, And Diy Projects Where Plastic Materials Are Prevalent. Performance Features: Durability: Engineered For Long Lasting Performance, Especially In High-speed Drilling Applications. Precision: Provides Clean Holes With Minimal Burr Formation, Ensuring A Professional Finish. Packaging: Often Sold Individually Or In Sets, With Clear Labeling For Easy Identification Of Size And Type. Handsaw Type: Crosscut Saw: Designed For Cutting Across The Grain Of Wood. Rip Saw: Made For Cutting Along The Grain Of Wood. Panel Saw: A Versatile Saw For General Purpose Cutting. Back Saw: Typically Used For Precision Cuts, Featuring A Reinforced Spine. Blade Length: Common Lengths Range From 12 Inches To 26 Inches (300 Mm To 660 Mm), Depending On The Type Of Saw And Intended Use. Blade Material: Usually Made From High-carbon Steel For Durability And Sharpness. Some May Have A Stainless-steel Blade For Corrosion Resistance. Tooth Configuration: Teeth Per Inch (tpi): Fewer Teeth (e.g., 5-7 Tpi) For Faster Cuts In Rough Wood. More Teeth (e.g., 10-12 Tpi) For Smoother Cuts In Finer Materials. Tooth Design: Raker Teeth: Alternating Teeth For A More Aggressive Cut. Side Set Teeth: Teeth Angled To Reduce Friction And Facilitate Cutting. Kerf Width: The Width Of The Cut Made By The Saw, Typically Ranging From 0.025 Inches To 0.05 Inches (0.64 Mm To 1.27 Mm) Depending On The Blade Thickness. Handle: Material: Wood, Plastic, Or Rubber For A Comfortable Grip. Design: Usually Ergonomically Shaped To Reduce Hand Fatigue. Grip Type: May Have A Straight Or D-shaped Handle For Better Control. Weight: Weight Varies Depending On The Materials And Size, Usually Between 1 Lb To 3 Lbs (0.45 Kg To 1.36 Kg). Applications: Suitable For Woodworking, Carpentry, And General-purpose Cutting Tasks. Ideal For Both Professional And Diy Applications. Ppvc25 Material: Wheel Material: Polypropylene (pp), Known For Its Durability And Resistance To Chemicals And Moisture. Frame Material: Often Made From Steel Or Plastic, Depending On The Specific Model. Wheel Diameter: Diameter: 25 Mm (approximately 1 Inch). Load Capacity: Weight Capacity: Typically Rated For Loads Ranging From 50 Kg To 100 Kg (approximately 110 Lbs To 220 Lbs), Depending On The Specific Design And Application. Type: Type: Usually Designed As A Swivel Caster, Allowing For Easy Maneuverability. May Also Come In A Fixed Configuration For Straight-line Movement. Mounting Type: Mounting Plate: Commonly Features A Square Or Rectangular Mounting Plate With Holes For Easy Attachment To Carts, Furniture, Or Other Equipment. Stem Type: Some Models May Have A Stem For Mounting Directly Into A Socket. Braking System: Brake: Some Variants May Include A Brake Mechanism For Locking The Wheel In Place, Providing Additional Stability When Needed. Environmental Resistance: Resistant To Moisture, Making It Suitable For Use In Damp Or Humid Environments. Applications: Ideal For Use In Light-duty Applications Such As: Office Furniture (like Chairs And Desks). Carts And Trolleys. Material Handling And Logistics. Ceiling Sealant Steel Brush Battery 6.0 Ah Battery Type: Chemistry: Lithium-ion (li-ion) Series: Typically, Part Of The Bosch Professional Line, Compatible With Their 18v Tools. Capacity: Amp Hour (ah): 6.0 Ah Provides Extended Runtime For Demanding Applications. Voltage: Nominal Voltage: 18v Weight: Approximate Weight: 0.65 Kg (about 1.43 Lbs) Dimensions: Size: Typically, Around 115 Mm X 75 Mm X 50 Mm (4.5 In X 3 In X 2 In), Depending On Design. Charging Time: With Fast Charger (e.g., Bosch Gal 18v 40): Approximately 30-45 Minutes For A Full Charge. Standard Charger: Typically, 1-2 Hours For A Full Charge. Compatibility: Compatible Tools: Works With A Wide Range Of Bosch 18v Cordless Power Tools, Including Drills, Impact Drivers, Saws, And More. Features: Electronic Cell Protection (ecp): Protects Against Overload, Overheating, And Deep Discharge, Extending Battery Life. Bosch Coolpack Technology: Helps Dissipate Heat, Reducing Heat Buildup And Prolonging Battery Life. Led Charge Level Indicator: Built-in Leds Indicate The Remaining Battery Charge Level For Better Visibility. Durability: Impact Resistant: Designed To Withstand Tough Job Site Conditions. Weather Resistant: Suitable For Use In Various Environmental Conditions, Although Prolonged Exposure To Extreme Conditions Should Be Minimized. Applications: Ideal For Professional And Diy Applications Requiring High Performance And Longevity, Such As Construction, Woodworking, And Other Demanding Tasks.

Details: Description Republic Of The Philippines City Of San Pedro Province Of Laguna City Bids And Awards Committee Invitation To Apply For Eligibility And To Bid Pr No. 2024-11-1181 1. The City Government Of San Pedro, Laguna Through The 2024 Budget Approved By The Sangguniang Panlungsod Intends To Apply The Sum Of Php 20,151,779.00 Being The Approved Budget Contract (abc) To Payments Under The Contract For Supply And Delivery Of Annual Care Benefit For Particular And File Member Of City Of San Pedro, Laguna. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of San Pedro, Laguna Now Invites Bids For The Following: Quantity Unit Item Description Renewal Notice: Group Hmo Plan For City Of San Pedro, Laguna Run And Board Maximum Benefit Limit 1 Lot Regular Private 500,000 78 Lot Regular Private 150,000 580 Lot Semi-private 100,000 Provider Access - Members Shall Have Access In All Accredited Hospitals And Clinics Nationwide Including Six (6) Major Hospitals: Mmc, Tmc, Slmc-qc, Slmc-global, Ahmc And Csmc; Without Access To Healthway Medical Clinics Pre-existing Condition - Pre-existing Conditions Or Illnesses Are Covered Up To Plan Limit For All Employees Preventive Health Benefits 1. Diagnostic Assessment And Management - Covered 2. Administration Of Immunization, Except Cost Of Vaccines - Covered 3. Counseling On Health Habits, Diet And Exercise - Covered 4. Family Planning Counseling - Covered 5. Record Keeping Of Medical History - Covered 6. Wellness Programs - Covered Up To Two(2) Sessions Per Year 7. Annual Physical Examination (ape) Shall Be Conducted By Accredited Ape Provider To Include The Following Procedures For All Employees: A. Medical Check-up And Evaluation - Covered B. Complete Blood Count With Blood Typing - Covered C. Routine Urinalysis - Covered D. Stool Examination (fecalysis) - Covered E. Chest X-ray - Covered F. Pap Smear For Female Employees 35 Years Old And Above Or If Prescribed - Covered G. Electrocardiogram (ecg) For Employees 35 Years Old And Above Or If Prescribed - Covered Emergency Care Benefits 1. In Accredited Hospitals A. Doctor's Services - Covered B. Medicines Used During Treatment Or For Immediate Relief - Covered C. Oxygen And Intravenous Fluids - Covered D. Dressings, Casts And Sutures - Covered E. Laboratory, X-ray And Other Diagnostic Examinations Directly Related To The Emergency Management Of The Patient - Covered F. Vehicular Accidents/medico-legal Cases Seen At The Emergency Room Treated As Out-patient - Covered 2.in Non-accredited Hospitals - Reimbursement Of 100% Of All Hospital Charges And Professional Fees Based On Rates But Not To Exceed P 30,000.00 3. In Areas With No Accredited Hospitals - Shall Cover Up Tp Mbl 4. Emergency Ambulance Conduction - Ambulatory Transport During Transfer Charge To Mbc, With No Cash Out On Accredited Hospital Up To Mbl (covers Transfers From Site To Hospital, Hospital To Hospital And Hospital To Home) Out-patient Benefits 1. Fees For Medical Consultation And Physical Examination Services, Including Er Consultation; - Covered 2. Referral To Specialty Or Sub-specialty Physician Including Ent And Opthalmology Referrals - Covered 3. Laboratory Services Deemed Necessary By The Attending Physician - Covered 4. Radiographs And Other Modern Diagnostic Modalities As Well As Interventional Modalities Such As Ct Scan, Mri, Ecg, Eeg, Ultrasound Procedures, Mammography, Angiography, Carotid Doppler Ultrasound, Etc. And Other Procedures Or Modern Modalities Deemed Necessary By The Attending Physician In The Evaluation And Management Of The Patient Or Employee - Covered 5. Treatment Of Minor Injuries Not Requiring Confinements Including Sutures, Cast, And Other Items Used During Treatment - Covered 6. Routine Minor Elective Surgical Procedures - Covered 7. Diagnostics Needed For Medical Clearance Prior To A Contemplated Medical Procedure/surgery Such As Cardio-pulmonary Clearance, Etc. - Covered 8. Eye, Ear, Nose And Throat (eent) Care - Covered 9. Treatment Of Minor Injuries Such As Lacerations, Mild Burns, Sprains And The Like - Covered 10. Necessary Routine Laboratory Test And Commonly Available Diagnostic Procedures, Including Ecg And X-ray Examinations, As May Be Prescribed By Affiliated Physicians And Specialists - Covered 11. Minor Surgery Procedures For Covered Lesions - Covered 12. Cauterization Of Warts - Covered 13. Sclerotheraphy (for Deep Veins Only) - Covered 14.prescribed Allergy Testing/allergy Screening - Covered 15. Tuberculin Test - Subject To Mbl 16. Physical/occupational Theraphy - Up To 12 Session Per Member Per Year 17. Speech Theraphy (consultations Considered As Sessions) - Up To P10,000 18. Pre-natal & Post-natal Consultation With Accredited Ob-gyne - Covered Up To Twelve (12) Sessions In-patient Benefits 1. No Deposit Upon Admission - Covered 2. Room And Board Accommodation According To Type Of Plan - Covered A. This Plan Is Integrated With Philhealth Benefits. This Means That In Case Of Hospitalization, The Member's Philhealth Benefit Will Be Applied First And Will Philbritish Care Will Only Only Answer For The Remaining Covered Charges After Philhealth-covered B. Philhealth Should Be Filed Prior To Discharge- Covered 3. General Nursing Services - Covered 4. Use Of Operating And Recovery Rooms - Covered 5. Services Of Affiliated Specialist Like Surgeons, Anesthesiologists, Etc. - Covered 6. Services And Medications For Anesthesia (e.g. General Anesthesia, Spinal, Epidural Anesthesia,etc.) Deemed Necessary For A Surgical Procedure - Covered 7. Transfusion Of Blood And Intravenous Fluids Including Cost Of Blood Products, Except Screening And Cross-matching-covered 8. Complex And Non-complex Diagnostic Examinations Enumerated Under Outpatient Services Shall Be Covered Up To Plan Limit Of The Underlying Illness Or Disease - Covered 9. Administered Medicines - Covered 10. Dressings, Plaster Casts, Sutures And Other Items Directly Related To The Medical Management Of The Patient - Covered 11. Icu Confinement Subject To The Maximum Limits And Pre-existing Conditions Coverage - Covered 12. Assistance In Administrative Requirements Through The Liason Officers - Covered 13.all Other Services Related To The Management Of The Case - Covered - All The Above In-patient Services Are Covered Up To The Limits For The Underlying Illness Or Procedure Special Diagnostic Procedures, Modalities, Therapeutic And Other Benefits 1. The Following Prescribed Diagnostic Examinations On An Out-patient Basis Shall Be Covered Up To Mbl Per Member Per Year Immunologic And Special Laboratory Examninations: A. Hepatitis Profile, E.g. Hbeag, Anti Hbc (igm), Anti-hav (igm), Hbv Dna - Covered Up To Plan Limit B. Ana Profile,e.g. Anti-nuclear-antibody, Anti-native-dna, Anti-sm, Anti-ssa, Beta, Ana - Covered Up To Plan Limit C. Thyroid Profile, E.g. T3,t4,tsh, Fta-abs - Covered Up To Plan Limit D. Torch Profile, E.g. Anti-toxoplasma Gondii(igm), Anti-rubella, Anti-cytomegalo-virus(total Ig)-covered Up To Plan Limit E. Sle Test, Fat Widal Test, Aso, Titer, Serum Ig-ci, Alpha-ferto Protein, Esr - Covered Up To Plan Limit F. Urine/blood Culture And Sensitivity Test - Covered Up To Plan Limit G. 24-hour Protein Determination - Covered Up To Plan Limit H. Troponin - Covered Up To Plan Limit I. Glycosylated Hemoglobin - Covered Up To Plan Limit J. Prostate Specific Antigen - Covered Up To Plan Limit Special And Computer-based Diagnostic Procedures A. Stress Testing (all Types) - Covered Up To Plan Limit B. All Types Of Cat Scan - Covered Up To Plan Limit C. Nuclear Imaging(including Parathyroid Scan) - Covered Up To Plan Limit D. Total Body Scan, Bone Scan, Renal Scan, Pulmonary Scan, Thallium Scan, Thyroid Scan - Covered Up To Plan Limit E. Echocardiography (all Types)- Covered Up To Plan Limit F. Fluorescein Angiography Or Angioscopy Of Eye Total - Covered Up To Plan Limit G. Breast Scintigraphy - Covered Up To Plan Limit H. Electro Myelography With Nerve Conduction Test - Covered Up To Plan Limit I. Electroencephalography (eeg) - Covered Up To Plan Limit J. Chest, Abdominal, Thyroid, Renal, Breast, Or Pelvic Ultrasound (including Transvaginal)-covered Up To Plan Limit K. 3d Imaging - Covered Up To Plan Limit L. Mammography - Covered Up To Plan Limit M. Magnetic Resonance Imaging (mri) With Or Without Contrast - Covered Up To Plan Limit Others A. Chemotherapy - Up To 12 Sessions Per Member Per Year B. Radiotherapy - Up To 12 Sessions Per Member Per Year C. Dialysis - Up To 12 Sessions Per Member Per Year D. Arthroscopic Knee Surgery - Covered Up To Plan Limit E. Laparoscopic Pelvic Operation - Covered Up To Plan Limit F. Laparoscopic Cholecystectomy - Covered Up To Plan Limit G. Extracorporeal Shock Wave Lithotripsy (eswl)/lithotripsy - Covered Up To Plan Limit H. Endoscopic Retrograde Cholangiopancreatography (ercp) - Covered Up To Plan Limit I. Functional Endoscopic Sinus Surgery (fess) -covered Up To Plan Limit J. Laser Theraphy (for Dm Patients Only) - Covered Up To Plan Limit K. Transurethral Microwave Theraphy Of Prostate - Covered Up To Plan Limit L. Other Laparoscopic, Endoscopic And Arthroscopic Procedure - Covered Up To Plan Limit M. Angiogram And Angioplasty/coronary Artery Bypass Graft - Covered Up To Plan Limit N. Conventional Hemorrhoidectomy - Covered Up To Plan Limit O. Scalpel, Stapled Or Laser Hemorrhoidectomy - Covered Up To Plan Limit P. 24-hour Eeg Monitoring - Covered Up To Plan Limit Q. 4d Ultrasound For Medical Cases Only - Covered Up To Plan Limit R. Ct Pulmonary Angiography - Covered Up To Plan Limit S. Esophageal Manometry - Covered Up To Plan Limit T. Intensified Modulated Radiotheraphy - Covered Up To Plan Limit U. Mammotome - Covered Up To Plan Limit V. Photodynamic Theraphy - Covered Up To Plan Limit W. Positron Emission Tomography - Covered Up To Plan Limit X. Other Special Diagnostic Procedures Not Mentioned Above - Covered Up To Limit Plan Y. Other Medically Necessary Modalities Of Treatment Not Mentioned Above Or Those For Which There Are No Comparable, Convetional Or Traditional Counterparts - Covered Up To Plan Limit Other Benefits - Congenital And Hereditary Illness - Up To Plan Limit - Congenital Hernia - Up To Plan Limit - Chronic Dermatoses - Up To Plan Limit (consultations Only) - Provoked And Unprovoked Assault - Up To Plan Limit - Work-related Cases Based On Conditions Covered By Ecc - Up To Plan Limit (for Principals Only) - Motor Vehicle Accidents - Up To Plan Limit - Scoliosis - Up To Plan Limit (consult And Treatment) - Anti-rabies, Anti-venom And Anti-tetanus Vaccines - Up To Aggregate Limit Of P 20,000 Involuntary Room Upgrade - In Case Of Emergency And There Is No Room Available Equal To Member's Room Plan, The Member May Occupy The Next Higher Category Room Plan With No Incremental Charges Within The 24-48 Hours Of Confinement Dental Benefits -health Partners 1. Oral Examintaion/diagnosis As Needed 2. Oral Prophylaxis Every Six(6) Months (twice A Year) 3. Gum Problem Consultation And Treatment Planning 4. Simple Tooth Extraction When Indicated (excluding Impaction) 5. Temporary Fillings When Indicated 6. Re-cementation Of Loose Jacket Crowns 7. Adjustment Of Dentures 8. Oral Hygiene Instruction 9. Dental Helath Education And Consultation 10. Othrodontic Treatment Consultation 11. Permanent Light Cure Fillings Up To Two(2) Teeth 12. Discounted Rates Of Up To 15% For Other Services Not Covered By The Dental Plan (e.g. Dentures, X-rays, Permanent Fillings And Dental Surgery) Financial Assistance (for Employees Only) - Natural Death (p 25,000.00) - Accidental Death (p 50,000.00) Delivery Of The Goods/services Is Required Within Twelve (12) Months Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Otherwise Known As The “government Procurement Reform Act”. In Addition, Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws And Regulations Of Which Grant Similar Rights To Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The City Government Of San Pedro, Laguna And Inspect The Bidding At The Address Given Below During 8:30am To 9:30am Only. Office Of The Bac Secretariat 4/f Conference Room, City Administrator’s Office City Hall Bldg., San Pedro, Laguna A Complete Set Of Bidding Document May Be Purchased By Interested Bidders On The Date, Time And Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Php 25,000.00. Issuance Of Eligibility And Bidding Documents: November 22 – December 12, 2024 8:30am To 9:30am Bac Secretariat 4/f Conference Room City Administrator’s Office City Hall Bldg., San Pedro, Laguna 5. Bids Must Be Delivered To The Address Below On Or Before The Specified Date And Time. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Deadline Of Submission Of Eligibility Requirements And Opening Of Bids: December 12, 2024 10:00am Bac Secretariat 4/f Conference Room City Administrator’s Office City Hall Bldg., San Pedro, Laguna Pre-bid Conference: December 2, 2024 Bid Opening Shall Be On The Same Date And Time For Deadline Of Submission Of Eligibility Requirements And Submission Of Bids And Shall Be Conducted At The Office Of Bac Secretariat. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Given Above. Late Bids Shall Not Be Accepted. 6. The City Government Of San Pedro, Laguna Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bid. Further, City Government Of San Pedro, Laguna, Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. For Further Information, Please Refer To: Mr. Merlin B. Paala Office Of The Bac Secretariat Telefax No. 8847.1722 (signed)atty. Henry B. Salazar Chairman City Bids And Awards Committee

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System 1. The Local Government Unit Of Irosin, Through The 20% Edf Intends To Apply The Sum Of One Million Two Hundred Twenty Seven Thousand One Hundred Seventy Three Pesos (p 1,227,173.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System, Good-40-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System Brief Description: 168bags Portland Cement/ 155.5 Cu.m. Sand/ 19.5cu.m. Peasize/ 1cu.m. Gravel/ 2cu.m. Boulderette/ 5sacks Charcoal (wood)/ 1pc Mosquito Net/ 151packs Sahara/ 174pcs 12mm Rsb/ 21pcs 10mm Rsb/ 4pcs 8mm Rsb/ 16pcs 1-1/2” G.i. Pipe, S-40/ 18pcs 10mm Plain Bar/6rolls 2” Cyclone Wire, 5ft./ 5kgs Welding Rod/ 23kgs #16 Tie Wire/4pcs Cut-off Blade, 14” Diam/ 7pcs 4” Cutting Disc/4pcs Sandflex Blade/ 1gal Epoxy Primer/ 1pc 4” Roller Paint W/ Pan/2pcs 2” Paint Brush/60l.m. 3” Diam. P.e. Pipe, Sdr 11/ 120l.m. 2-1/2” P.e. Pipe Sdr 11/ 900l.m. 2” Diam P.e. Pipe, Sdr 11/ 1410l.m. 1-1/2” Diam. P.e. Pipe, Sdr 11/ 1500l.m. 1” Diam. P.e. Pipe, Sdr 11/ 600l.m. Diam. P.e. Pipe, Sdr 11/600l.m. ½” Diam. P.e. Pipe, Sdr 11/ 1pc 4” X 2-1/2” Wye Reducer/ 1pc 1” Diam. Wye/ 1pc 2-1/2” Diam. P.e. Elbow, 90deg./ 2pcs 2-1/2” Diam. P.e. Elbow, 45deg./ 3pcs 2-1/2” X 2” Coupling Reducer/ 3pcs 2” X 1-1/2” Coupling Reducer/ 1pc 1-1/2” X 1” Coupling Reducer/ 1pc 2-1/2” Diam. Coupling/ 5pcs 2” Diam. Coupling/ 5pcs 1-1/2” Diam. Coupling/ 1pc 2-1/2” X 1-1/2” Wye Reducer/ 2pcs 2-1/2” X 2” Wye Reducer/ 1pc 1” Diam. End Cap/ 8pcs 6” X ½” Diam. G.i. Nipple, S-40/8pcs ½” Diam. G.i. Coupling, S-40/ 16pcs ½” Diam. G.i. Elbow, S-40/ 16pcs Teplon Tape/ 9pcs ½” Diam. Plastic Faucet/ 2pcs 3” Diam. Gate Valve/ 1pc 2-1/2” Gate Valve/ 5pcs 2” Diam. Gate Valve/ 3pcs 1-1/2” Diam. Gate Valve/ 1pc ¾” Marine Plywood/ 5pcs ½” Marine Plywood;/ 1pc ½” Phenolic Plywood/ 42pcs ½” Ord. Plywood/ 470bd.ft. 2” X 3” X 12’ Coco-lumber/ 1383bd.ft. 2” X 3” X 10’ Coco-lumber/ 32kgs Assorted Cw Nail Approved Budget For The Contract : P 1,227,173.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : 29% Edf 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Priveleges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024, November 27, 2024 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Hold A Pre-bid Conference On November 14, 2024, 2:00pm At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before November 27, 2024, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 27, 2024, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Benjamin M. Gabionza, Ce Municipal Engineer Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Issue: November 7, 2024 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System, With Project Identification Number Good-40-2024. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Nutribun, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 20% Edf In The Amount Of One Million Two Hundred Twenty Seven Thousand One Hundred Seventy Three Pesos ( P 1,227,173.00). 2.2. The Source Of Funding Is: 20% Edf 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Not Hold A Pre-bid Conference For This Project. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.supply & Delivery Of Hardware/materials For The Improvement Of Various Barangay Water System Brief Description: 168bags Portland Cement/ 155.5 Cu.m. Sand/ 19.5cu.m. Peasize/ 1cu.m. Gravel/ 2cu.m. Boulderette/ 5sacks Charcoal (wood)/ 1pc Mosquito Net/ 151packs Sahara/ 174pcs 12mm Rsb/ 21pcs 10mm Rsb/ 4pcs 8mm Rsb/ 16pcs 1-1/2” G.i. Pipe, S-40/ 18pcs 10mm Plain Bar/6rolls 2” Cyclone Wire, 5ft./ 5kgs Welding Rod/ 23kgs #16 Tie Wire/4pcs Cut-off Blade, 14” Diam/ 7pcs 4” Cutting Disc/4pcs Sandflex Blade/ 1gal Epoxy Primer/ 1pc 4” Roller Paint W/ Pan/2pcs 2” Paint Brush/60l.m. 3” Diam. P.e. Pipe, Sdr 11/ 120l.m. 2-1/2” P.e. Pipe Sdr 11/ 900l.m. 2” Diam P.e. Pipe, Sdr 11/ 1410l.m. 1-1/2” Diam. P.e. Pipe, Sdr 11/ 1500l.m. 1” Diam. P.e. Pipe, Sdr 11/ 600l.m. Diam. P.e. Pipe, Sdr 11/600l.m. ½” Diam. P.e. Pipe, Sdr 11/ 1pc 4” X 2-1/2” Wye Reducer/ 1pc 1” Diam. Wye/ 1pc 2-1/2” Diam. P.e. Elbow, 90deg./ 2pcs 2-1/2” Diam. P.e. Elbow, 45deg./ 3pcs 2-1/2” X 2” Coupling Reducer/ 3pcs 2” X 1-1/2” Coupling Reducer/ 1pc 1-1/2” X 1” Coupling Reducer/ 1pc 2-1/2” Diam. Coupling/ 5pcs 2” Diam. Coupling/ 5pcs 1-1/2” Diam. Coupling/ 1pc 2-1/2” X 1-1/2” Wye Reducer/ 2pcs 2-1/2” X 2” Wye Reducer/ 1pc 1” Diam. End Cap/ 8pcs 6” X ½” Diam. G.i. Nipple, S-40/8pcs ½” Diam. G.i. Coupling, S-40/ 16pcs ½” Diam. G.i. Elbow, S-40/ 16pcs Teplon Tape/ 9pcs ½” Diam. Plastic Faucet/ 2pcs 3” Diam. Gate Valve/ 1pc 2-1/2” Gate Valve/ 5pcs 2” Diam. Gate Valve/ 3pcs 1-1/2” Diam. Gate Valve/ 1pc ¾” Marine Plywood/ 5pcs ½” Marine Plywood;/ 1pc ½” Phenolic Plywood/ 42pcs ½” Ord. Plywood/ 470bd.ft. 2” X 3” X 12’ Coco-lumber/ 1383bd.ft. 2” X 3” X 10’ Coco-lumber/ 32kgs Assorted Cw Nail B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Hardware/materials 168bags Portland Cement/ 155.5 Cu.m. Sand/ 19.5cu.m. Peasize/ 1cu.m. Gravel/ 2cu.m. Boulderette/ 5sacks Charcoal (wood)/ 1pc Mosquito Net/ 151packs Sahara/ 174pcs 12mm Rsb/ 21pcs 10mm Rsb/ 4pcs 8mm Rsb/ 16pcs 1-1/2” G.i. Pipe, S-40/ 18pcs 10mm Plain Bar/6rolls 2” Cyclone Wire, 5ft./ 5kgs Welding Rod/ 23kgs #16 Tie Wire/4pcs Cut-off Blade, 14” Diam/ 7pcs 4” Cutting Disc/4pcs Sandflex Blade/ 1gal Epoxy Primer/ 1pc 4” Roller Paint W/ Pan/2pcs 2” Paint Brush/60l.m. 3” Diam. P.e. Pipe, Sdr 11/ 120l.m. 2-1/2” P.e. Pipe Sdr 11/ 900l.m. 2” Diam P.e. Pipe, Sdr 11/ 1410l.m. 1-1/2” Diam. P.e. Pipe, Sdr 11/ 1500l.m. 1” Diam. P.e. Pipe, Sdr 11/ 600l.m. Diam. P.e. Pipe, Sdr 11/600l.m. ½” Diam. P.e. Pipe, Sdr 11/ 1pc 4” X 2-1/2” Wye Reducer/ 1pc 1” Diam. Wye/ 1pc 2-1/2” Diam. P.e. Elbow, 90deg./ 2pcs 2-1/2” Diam. P.e. Elbow, 45deg./ 3pcs 2-1/2” X 2” Coupling Reducer/ 3pcs 2” X 1-1/2” Coupling Reducer/ 1pc 1-1/2” X 1” Coupling Reducer/ 1pc 2-1/2” Diam. Coupling/ 5pcs 2” Diam. Coupling/ 5pcs 1-1/2” Diam. Coupling/ 1pc 2-1/2” X 1-1/2” Wye Reducer/ 2pcs 2-1/2” X 2” Wye Reducer/ 1pc 1” Diam. End Cap/ 8pcs 6” X ½” Diam. G.i. Nipple, S-40/8pcs ½” Diam. G.i. Coupling, S-40/ 16pcs ½” Diam. G.i. Elbow, S-40/ 16pcs Teplon Tape/ 9pcs ½” Diam. Plastic Faucet/ 2pcs 3” Diam. Gate Valve/ 1pc 2-1/2” Gate Valve/ 5pcs 2” Diam. Gate Valve/ 3pcs 1-1/2” Diam. Gate Valve/ 1pc ¾” Marine Plywood/ 5pcs ½” Marine Plywood;/ 1pc ½” Phenolic Plywood/ 42pcs ½” Ord. Plywood/ 470bd.ft. 2” X 3” X 12’ Coco-lumber/ 1383bd.ft. 2” X 3” X 10’ Coco-lumber/ 32kgs Assorted Cw Nail 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three(3) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Three(3) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Applicable Provided That Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Hardware/materials If It Follows The Technical Specification Set By The End-user Units. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Portland Cement 168 Bags 2 Sand 15.5 Cu.m 3 Peasize 19.5 Cu.m. 4 Gravel 1 Cu.m. 5 Boulderette 2 Cu.m. 6 Charcoal (wood) 5 Sacks 7 Mosquito Net 1 Pc 8 Sahara 151 Packs 9 12mm Rsb 174 Pcs 10 10mm Rsb 21 Pcs 11 8mm Rsb 4 Pcs 12 1-1/2” G.i. Pipe, S-40 16 Pcs 13 10mm Plain Bar 18 Pcs 14 2” Cyclone Wire, 5ft. 6 Rolls 15 Welding Rod 5 Kgs 16 #16 Tie Wire 23 Kgs 17 Cut-off Blade, 14” Diam. 4 Pcs 18 4” Cutting Disc 7 Pcs 19 Sandflex Blade 4 Pcs 20 Epoxy Primer 1 Gal 21 4” Roller Paint W/ Pan 1 Pcs 22 2” Paint Brush 2 Pcs 23 3” Diam. P.e. Pipe, Sdr 11 60 L.m. 24 2-1/2” P.e. Pipe Sdr 11 120 L.m. 25 2” Diam. P.e. Pipe, Sdr 11 900 L.m. 26 1-1/2” Diam. P.e. Pipe, Sdr 11 1410 L.m. 27 1” Diam. P.e. Pipe, Sdr 11 1500 L.m. 28 ¾” Diam. P.e. Pipe, Sdr 11 600 L.m. 29 ½” Diam. P.e. Pipe, Sdr 11 600 L.m. 30 4” X 1-1/2” Wye Reducer 1 Pc 31 1” Diam. Wye 1 Pc 32 2-1/2” Diam. P.e. Elbow, 90deg. 1 Pc 33 2-1/2” Diam. P.e. Elbow, 45deg. 2 Pcs 34 2-1/2” X 2” Coupling Reducer 3 Pcs 35 2” X 1-1/2” Coupling Reducer 3 Pcs 36 1-1/2” X 1” Coupling Reducer 1 Pc 37 2-1/2” Diam. Coupling 1 Pc 38 2” Diam. Coupling 5 Pcs 39 1-1/2” Diam. Coupling 5 Pcs 40 2-1/2” X 1-1/2” Wye Reducer 1 Pc 41 2-1/2” X 2” Wye Reducer 2 Pcs 42 1” Diam. End Cap 1 Pc 43 6” X ½” Diam. G.i. Nipple, S-40 8 Pcs 44 ½” Diam. G.i. Coupling, S-40 8 Pcs 45 ½” Diam. G.i. Elbow, S-40 16 Pcs 46 Teplon Tape 16 Pcs 47 ½” Diam. Plastic Faucet 9 Pcs 48 3” Diam. Gate Valve 2 Pcs 49 2-1/2” Gate Valve 1 Pc 50 2” Diam. Gate Valve 5 Pcs 51 1-1/2” Diam. Gate Valve 3 Pcs 52 ¾” Marine Plywood 1 Pc 53 ½” Marine Plywood 5 Pcs 54 ½” Phenolic Plywood 1 Pc 55 ½” Ord. Plywood 42 Pcs 56 2” X 3” X 12’ Coco-lumber 470 Bd.ft 57 2” X 3” X 10’ Coco-lumber 1383 Bd.ft. 58 Assorted Cw Nail 32 Kgs Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 168 Bags Portland Cement 2 15.5 Cu.m. Sand 3 19.5 Cu.m. Peasize 4 1 Cu.m. Gravel 5 2 Cu.m. Boulderette 6 5 Sacks Charcoal (wood) 7 1 Pc Mosquito Net 8 151 Packs Sahara 9 174 Pcs 12mm Rsb 10 21 Pcs 10mm Rsb 11 4 Pcs 8mm Rsb 12 16 Pcs 1-1/2” G.i. Pipe, S-40 13 18 Pcs 10mm Plain Bar 14 6 Rolls 2” Cyclone Wire, 5ft. 15 5 Kgs Welding Rod 16 23 Kgs #16 Tie Wire 17 4 Pcs Cut-off Blade, 14” Diam. 18 7 Pcs 4” Cutting Disc 19 4 Pcs Sandflex Blade 20 1 Gal Epoxy Primer 21 1 Pc 4” Roller Paint W/ Pan 22 2 Pcs 2” Paint Brush 23 60 L.m. 3” Diam. P.e. Pipe, Sdr 11 24 120 L.m. 2-1/2” P.e. Pipe Sdr 11 25 900 L.m. 2” Diam. P.e. Pipe, Sdr 11 26 1410 L.m. 1-1/2” Diam. P.e. Pipe, Sdr 11 27 1500 L.m. 1” Diam. P.e. Pipe, Sdr 11 28 600 L.m. ¾” Diam. P.e. Pipe, Sdr 11 29 600 L.m. ½” Diam. P.e. Pipe, Sdr 11 30 1 Pc 4” X 1-1/2” Wye Reducer 31 1 Pc 1” Diam. Wye 32 1 Pc 2-1/2” Diam. P.e. Elbow, 90deg. 33 2 Pcs 2-1/2” Diam. P.e. Elbow, 45deg. 34 3 Pcs 2-1/2” X 2” Coupling Reducer 35 3 Pcs 2” X 1-1/2” Coupling Reducer 36 1 Pc 1-1/2” X 1” Coupling Reducer 37 1 Pc 2-1/2” Diam. Coupling 38 5 Pcs 2” Diam. Coupling 39 5 Pcs 1-1/2” Diam. Coupling 40 1 Pc 2-1/2” X 1-1/2” Wye Reducer 41 2 Pcs 2-1/2” X 2” Wye Reducer 42 1 Pc 1” Diam. End Cap 43 8 Pcs 6” X ½” Diam. G.i. Nipple, S-40 44 8 Pcs ½” Diam. G.i. Coupling, S-40 45 16 Pcs ½” Diam. G.i. Elbow, S-40 46 16 Pcs Teplon Tape 47 9 Pcs ½” Diam. Plastic Faucet 48 2 Pcs 3” Diam. Gate Valve 49 1 Pc 2-1/2” Gate Valve 50 5 Pcs 2” Diam. Gate Valve 51 3 Pcs 1-1/2” Diam. Gate Valve 52 1 Pc ¾” Marine Plywood 53 5 Pcs ½” Marine Plywood 54 1 Pc ½” Phenolic Plywood 55 42 Pcs ½” Ord. Plywood 56 470 Bd.ft. 2” X 3” X 12’ Coco-lumber 57 1383 Bd.ft. 2” X 3” X 10’ Coco-lumber 58 32 Kgs Assorted Cw Nail Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Lorenzo G. Ubalde Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor Technical Specifications Item No. Item Statement Of Compliance (comply/not Comply) Prepared By: ______________ Proprietor

Details: The tender is for the provision and delivery of Psm_rodenticide, here 72 buckets of Ratron poison lenses for forestry, to the Brandenburg State Forestry Office, Bad Belzig Forestry Office, Forstweg 8, 14828 Bad Belzig. Delivery is made in compliance with the Ggbefa dangerous goods transport regulations, in safe, environmentally friendly and sturdy packaging. Delivery will be announced at least 2 working days before delivery. Goods will be accepted from Monday to Thursday between 7:30 a.m. and 4:00 p.m.

Details: Etelä-savo Hyvinvointalue Eloisa Requests a Participation Application for Passenger Transport According to the Participation Request for the Contract Period 1.11.2023-31.10.2027. ","","procurement All Candidates Who Meet All Eligibility And Minimum Requirements Are Selected. Eligibility and minimum requirements as well as equipment requirements are described in the request for participation and its attachments. The Service Must Comply with the Directly Mandatory Regulations of the European Union, Finnish Laws and Regulations, and the Orders Given by the Authorities.","","the application for participation is binding and must be written in Finnish.

Details: The procurement notice sets up a dynamic purchasing system. The dynamic purchasing system accepts all eligibility requirements to meet the candidates. Registration does not apply to the candidate. The Candidate may choose which deposits to be made within the crew will take place. Acceptance of candidates to the Dynamic Purchase System Makes Katain City Procurement Services » The target is the order services acquired by Ka.i City on the basis of a taxi or passenger transport licence. The services required by the City staff, trustees, as well as thenscription services required by the Daycare and Schools.”

Purchaser Name: Contracting Board Of The Ministry Of Transport And Sustainable Mobility | Simplified Open Procedure Processed To Award The Works Financed With European Funds Called "Photovoltaic Installation On The Roof Of Different Municipal Buildings In Mejorada Del Campo (Madrid)"