Survey Tenders

Details: Work Of Water Supply System Of Bakho Town Under Amrut 2.0 survey (both Existing And Proposed Components), Soil Investigation, Design and Construction Of a) construction Of Intake Well And Raw Water Pumphouse On Son river Intake Well Is Considered With Diameter 6 Meters And height 22 Meters Having Average Wall Thickness 350 Mm Also pumphouse Of 4.00 M Height Is Considered b) Construction Of Collecting Well Having A Diameter Of 4.5 M And 6 meter. c) Raw Water Pump: Supplying And Installation Of 3 Nos. Vertical turbine Pumps 3 No 35 Kw (discharge M 23 Lps. Head 94.0 meter) (2w+1s) d) Water Treatment Plant Of 3.50 Mld Capacity Along With Clear water Pumps For 3.50 Mld And All Necessary Electrical And mechanical Equipment For Clear Water Pump House e) Clear Water Pump: 3 Nos.22 Kw (two Working And One Stand By) discharge 22 Ips And 57 M Head,22 Kw f) Providing And Laying Of Raw Water Pumping Main 300 Mm Dia di-k-9 Having Cumulative Length Of 7126 Meter. g) Providing And Laying Of Clear Water Pumping Main 100mm To 300 Mm Dia Di-k-9 Having Cummulative Length Of 4048 Meter. h) Construction Of Three Nos. 20.00 M Staging Height Rcc Overhead service Reservoir Having Capacity Of 475 Kl, 400 Kl, 425 Kl For effective Distribution Of Water. i) Providing, Laying And Jointing Of 110mm To 355 Hdpe Pn-6 Class pipe & 400 Mm Dia Di K7 Pipe For Strengthening And Extension Of water Supply Distribution Network Of Bakho Water Supply arrangement Having Total Length Of 51518 Meter. j ) Supply And Installation Of Plc Scada For Entire Water Supply system k) Providing / Shifting House Service Connections For 1226 Nos. Of domestic Water Connection. 1) 11 Kv Ht Feeder Of 10 Km Length For Intake Well & Wtp substation For Wtp And Intake Well.

Details: Presolicitation Notice/advertisement Gsa Public Buildings Service u.s. Government general Services Administration (gsa) Seeks To Lease The Following Space: state: Ar city: Little Rock delineated Area: West: I-430, Colonel Glenn Rd, Cooper Orbit rd, Rushmore Ave, Kanis Rd, Chenal Pkwy north: Cantrell Rd (thomas B Schueck Hwy), la Harpe Blvd east: Us-70, W Roosevelt Rd, Hwy 367 (s arch St & Arch St) south: Baseline Rd (hwy 338) minimum Sq. Ft. (aboa): 1,500 maximum Sq. Ft. (aboa): 1,650 space Type: Warehouse secured Parking Spaces (total): 6 full Term: 10 Years firm Term: 8 Years option Term: N/a additional Requirements: Warehouse Dimensions: *225” Length (18’9”) | 81” *width (6’9”) | 80” *ceiling Height (10’) *ground Clearance: 7.5” *floor Load 22,0000 roll Up Door secured Parking 24 Hour Access To Garage Or Warehouse build Blackout Privacy Fence 11/2022 offered Space Must Meet Government Requirements For Fire Safety, Accessibility, seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced lease Is Required. Offered Space Shall Not Be In The 1-percent-annual Chance floodplain (formerly Referred To As “100-year” Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications prohibitions Outlined Under Section 889 Of The Fy19 National Defense authorization Act (ndaa), As Implemented By The Federal Acquisition regulation (far). ). For More Information, Visit: Https://acquisition.gov/far- case-2019-009/889_part_b. expressions Of Interest Due: 1/07/2025 market Survey (estimated): 1/21/2025 occupancy (estimated): 05/01/2025 send Expressions Of Interest To: name/title: Carson Melom-lemos / Lco email Address: Carson.melom-lemos@gsa.gov government Contact Information lease Contracting Officer Carson Melom-lemos project Manager Roxanne Cancino

Details: Amendment 01 fda Issues The Subject Amendment 01 Incorporating All Questions And Answers Submitted In Response To The Rfq, And Extending The Quote Deadline. Please Review In Its Entirety. quotation Deadline: The Deadline For Receipt Of Quotations In Response To This Requirement Is Extended To Wednesday, January 8, 2025, At 12:00pm Et. Quote Submissions Are To Be Submitted To The Co Using Subject Line “75f40125q00050 – Cvm Evaluation Of Biological Safety Cabinets”. Quoters Shall Not Submit Electronic Documents Using Microsoft Office Suite Products That Contain The Use Of “macros”. --------------------------------------------------------------------------------------------------------------------------------------------- original Solicitation see Attached Solicitation important Dates And Information i. Mandatory Site Visit: All Quoters Must Attend At No Cost To The Government, A Site Survey: When: Tuesday, December 17, 2024, From 10:00am To 12:00pm Et. Where: Us Food And Drug Administration, Muirkirk Research Complex In Laurel, Maryland. firms Are To Arrive No Later Than 9:30am Et. The Quoter Must Electronically Provide To The Contracting Officer (co), Sheneil Green At Sheneil.green@fda.hhs.gov No Later Than 9:00am, December 16, 2024, The Below Information. All Attendees Must Have A Valid Government Issued Id: full Name And Telephone Number Of Individual Attendees company Name, Address, And Telephone Number. the Co Will Provide The Specific Site Visit Location And Point Of Contact Information Via Confirmation Email. ii. Question Deadline: Thursday, December 19, 2024, At 12:00pm Et. Questions Related To This Procurement Shall Be Submitted Via Email To Co At Sheneil.green@fda.hhs.gov. No Phone Calls Will Be Accepted. Questions Received After The Deadline Will Not Be Considered. Responses Will Be Posted To Sam.gov. iii. Quotation Deadline: The Deadline For Receipt Of Quotations In Response To This Requirement Is Tuesday, December 24, 2024, At 12:00pm Et. Quote Submissions Are To Be Submitted To The Co Using Subject Line “75f40125q00050 – Cvm Evaluation Of Biological Safety Cabinets”. Quoters Shall Not Submit Electronic Documents Using Microsoft Office Suite Products That Contain The Use Of “macros”.

Description: Sources Sought Notice Template ****************************************************************************** this Is A Sources Sought Notice For Information Only: This Is Not A Request For Quotes/proposals Or An Invitation For Bids. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals. Submission Of Any Information In Response To This Market Survey Is Purely Voluntary And Will Be Used Only For Market Research Purposes To Determine Availability Of Sources, Commerciality, And Competitive Strategy. The Government Assumes No Financial Responsibility For Any Costs Associated With Any Response To This Notice As Incurred By Prospective Contractors. ****************************************************************************** project Title: Integrated Wall System Connex tracking Number: Ihs1506332 the Indian Health Service (ihs), Crownpoint Health Care Facility, Located In/at Crownpoint, Nm 87313 Is Seeking Capable Sources To Provide Services: Integrated Wall System Connex the Anticipated Period Of Performance Or Delivery Date Is: 15 Days Aro the Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 339112- Surgical And Medical Instrument Manufacturing the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Supplies With Those Described In This Notice. in Accordance With The Buy Indian Act, 25 U.s.c. 47, The Indian Health Service Shall Give Preference At All Times, As Far As Practicable, To Indian Economic Enterprises. If Your Firm Is Capable Of Providing The Supplies And/or Services Described In This Notice, Complete The Attached Representation Form And Submit It Along With The Rest Of The Requested Documents Identified In This Notice. the Responses To This Sources Sought Notice/market Research Will Be Used To Determine The Acquisition Strategy Such As Indian-owned Enterprise Set Asides, Total Small Business Set Aside, Any Other Socio-economic Set Aside, Or Unrestricted. note: If This Requirement Is Set-aside, Far 52.219-14 (deviation 2019-01) Limitations On Subcontracting Will Apply; Similarly-situated Entity Description Applies. This Clause Requires That The Concern Perform At Least 50 Percent (50%) Of The Cost Of The Contract, Not Including The Cost Of Materials, With Its Own Employees. submission Instructions: all Interested Sources Must Submit A Capabilities Package To The Primary Point Of Contact Listed Below, No Later Than 1/9/2025 10:00 Am (mst). at A Minimum, The Following Information Must Be Submitted To The Poc Listed In This Notice: confirm The Buy-indian Set-aside Status You Qualify For Under Following Naics Code: 339112- Surgical And Medical Instrument Manufacturing if The Proposed Naics Is Not The Customary Or Applicable Naics Relative To The Need’s Description, Include Your Firm’s Proposed Naics And Rationale For The Different Naics. fill Out The Attached Ihs Buy Indian Act Indian Economic Enterprise Representation Form. if Non-indian, Indicate Firm’s Size – Small Or Other-than-small; And Other Socio-economic Program Participation Such As Small-disadvantaged, 8(a)-certified, Hubzone, Sdvosb, And/or Wosb/edwosb a Positive Statement Of Your Intention To Submit A Quote To An Upcoming Solicitation As A Prime Contractor. provide Firm’s Uei Number. evidence Of Recent (within The Last Five Years) Experience With Work Similar In Type And Scope To Include: contract Numbers project Titles dollar Amounts percent And Complete Description Of Work Self-performed. customer Points Of Contact With Current Telephone Number And Email Address. all Of The Above Information Must Be Submitted In Sufficient Detail For A Decision To Be Made On Availability Of Interested Qualified Buy-indian Parties. If Adequate Interest Is Not Received From Buy-indian Concerns, The Solicitation May Be Issued As Another Type Of Set Aside Or Unrestricted Without Further Notice. point Of Contact: Arlynda Largo, Purchasing Agent 505-786-2530, Arlynda.largo@ihs.gov place Of Performance: Crownpoint Healthcare Facility State Highway 371 Route 9 Junction Crownpoint Nm 87313 Country: Usa this Is Not A Solicitation. *include The Hhs Buy Indian Self-representation Form *inclusion Of The Sow/pws/specs Is Not Necessary. If Included, Mark As “draft.” *do Not Include Estimated Value, Unless Construction And Only As Required At Far 36.204.

Details: i) Geo-Technical & Hydro- geological Sub Surface Investigation, Surveying, Planning, Designing, Construction & commissioning of atleast. 5.0 meter dia. & required depth Radial Collector well with 250 mm dia & 300 mtr.(approx) long Infiltration Gallery with laying of LCG strainer pipe of minimum 8 mm thick including sub surface dyke to harvest 4.24 MLD raw water with 16 hours designing operation along with Pump House, Access & Pipe carrying Bridge at Subarnarekha along with 01(one) LT Station room for termination of WBSEDCL power source at vicinity of High Bank at Subarnarekha River (Kerwari), protection work at river bank, including construction of Pipe carrying Bridge with necessary Civil, Electrical (according to I.E. rules), Mechanical & all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement and (ii)Laying of raw water rising main from intake well to CWR(D.I./K9 Pipes All types and Class) with all necessary fittings & valves for raw water rising main work, temporary road restoration works for vehicular movement and pillar carrying pipe line and Jack Pushing works for raw and clear water rising main work all complete and (iii)Construction of R.C.C Over Head Reservoirs(OHR) of 1000 cum & 600 cum capacity with 20 m Staging height per approved departmental design, drawing & Specification etc at zone – A & Zone – B including land development , approach road, internal drainage, boundary wall and Sal Bullah Piling etc and pipe line work and connection to the Distribution and inlet line all complete (iv) Surveying , Geo-Technical Investigation, Planning, Designing, Construction & Commissioning of 770 Cum. capacity Clear Water Reservoir with Pumping station, with Construction of weir with minimum 400 cum capacity sedimentation tank and Slow sand filter of area 1000 Sqm minimum, Chlorination treatment unit, ,land development ,approach road, internal drainage, and boundary wall including Electro- Mechanical works at Jhalda and all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement within Jhalda Municipality under AMRUT 2.0 Project.

Details: W15qkn-25-x-12pn - Modular Artillery Charge System (macs) Pa161 And Pa103a2 Metal Containers: the U.s. Army Contracting Command-new Jersey (acc-nj), Picatinny Arsenal, Nj 07806-5000, On Behalf Of The Project Manager Combat Ammunition Systems (pm-cas), Both Located At Picatinny Arsenal, New Jersey, Is Conducting Market Research To Identify Potential Qualified Sources Capable Of Manufacturing And Delivering The Pa161 And Pa103a2 Metal Containers. The Pa161 And Pa103a2 Containers Are Square Rimmed Six-inch Diameter Cylindrical Steel Shipping And Storage Containers Between 31 And 38 Inches In Length, Used For The 155mm M231 And M232a1 Modular Artillery Charge System (macs). The Purpose Of This Market Survey Is To Obtain Current Information On The Capability Of Potential Sources To Deliver The Metal Containers In Support Of Fy26 – Fy31 Requirements. the 155mm M231 & M232-series Propelling Charges, Known As Macs, Consist Of Two Different Propelling Charges That Provide A Complete Zoning Solution For 155mm Artillery Applications By Using Multiples Of A Basic Increment. The M231 Charges Are Used At Lower Zones (zones 1 & 2), While M232-series Charges Are Used At Progressively Higher Zones As Required. A Total Of Four M231 Macs Are Packed Per Pa161 Container While Five M232a2 Macs Are Packed Per Pa103a2 Container. These Containers Were Developed To Protect The Macs Charges Throughout The Army's Stringent Logistic Environments And Have Design Features That Improve The Insensitive Munitions Characteristics For The Macs System. to Be Considered A Capable Source For This Effort, All Interested Sources Must Submit The Following Information: provide Evidence Of Capabilities Including An Ability To Produce A Combined Total Of The Pa161 And Pa103a2 Metal Containers At A Production Rate Of Approximately 10,000 Units Per Month And Any Capability To Surge To 92,000 Units Per Month; past Manufacturing Experience With Pa161 And Pa103a2 Metal Containers Within The Last Ten (10) Years; description Of Facilities, Personnel (numbers, Experience, Specialized Skill Sets), Key Raw Material Sources, And Environmental Compliance As It Relates To The Above Production Efforts; provide A Summary And Evidence Of In-house Quality Assurance System(s) In Order To Support This Production Program; a General Understanding Of United States Government Container Testing Requirements; provide Company Name, Address, Telephone Number, Email Address, Technical Point Of Contact, And Company Size (please Specify As Either A Large Business, Foreign-owned Business, Small Business, Small Disadvantaged Business, 8(a) Concern, Woman-owned Small Business, Historically Underutilized Business Zone Concern, Veteran-owned Small Business, Or Service-disabled Small Business). all Companies Interested In This Notice Must Be Registered In System For Award Management (sam). this Market Survey Is For Informational And Planning Purposes And Shall Not Be Construed As A Request For Proposal. The Technical Data Package (tdp) Will Be Provided Upon Request For Information Only. The M231 Type Tdp Is Marked Distribution F (further Dissemination Only As Directed By Pm Cas). The M232 Type Tdp Is Marked Distribution D, Therefore Distribution Will Only Be Authorized To The Department Of Defense (dod) And United States Dod Contractors. To Receive The Tdp, Contractors Are Required To Submit A Signed And Completed Dd Form 2345, Militarily Critical Technical Data Agreement; Amsta-ar Form 1350, Technical Data Request Questionnaire; And Non-disclosure Agreement (nda). if The Tdp For This Effort Is Provided, A Certificate Of Destruction Form Shall Be Completed And Submitted By Any Contractor In Receipt Of The Tdp, Upon This Sources Sought Notice Closing. all Information Is To Be Submitted At No Cost Or Obligation To The Government. If A Formal Solicitation Is Generated At A Later Date, A Solicitation Notice Will Be Published. Please Identify And Appropriately Mark Any Proprietary Information Submitted. All Information Provided Will Not Be Returned And Will Be Held In Confidential Status. all Market Information Sought In This Notification Must Be Provided Within 15 Days Of This Notice By Electronic Mail Only At No Cost To The Government. The Points Of Contact For This Requirement Are Jeremy.p.contreras.civ@army.mil And Renee.k.prendergast.civ@army.mil, Acc-nj (ccnj-ca), Bldg.10, Picatinny Arsenal, Nj 07806-5000. All Inquiries Shall Be Made Via E-mail Only. Telephone Inquiries Will Not Be Accepted.

Details: Classification Code: Z2jz Repair Or Alteration Of Miscellaneous Buildings naics Code: 236220 Commercial And Institutional Building Construction. set Aside: Tbd please Note: This Is Not A Solicitation Announcement. This Is A Potential Sources Sought Issued Only To Conduct A Market Research Study For An Anticipated Military Program. the Information Received Will Be Used Within Department Of Public Works, Fort Leavenworth, Kansas, To Facilitate The Decision-making Process And Will Not Be Disclosed Outside Of The Organization. This Announcement Is Not A Request For Proposals, But A Survey Of The Market For Potential Sources. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Announcement Or Any Follow-up Information Requests. This Notice Does Not Constitute A Request For Proposal And Is Not To Be Construed As A Commitment By The Government For Any Purpose Other Than Market Research. Respondents Will Not Be Notified Of The Results Of The Evaluation. department Of Public Works, Fort Leavenworth, Ks Is Seeking Current Relevant Experience, Personnel, And Capability To Work That Includes But Is Not Limited To The Following: Building 246 On Ft. Leavenworth, Kansas Requires A Full Demolition And Replacement Of Its’ Existing Mrl Elevator And Associated Equipment And Support Structure. The New Elevator Shall Be Installed With A 100% Non-proprietary System, Being That When Future Maintenance Is Required, Any Elevator Repair Technician Has The Capability Of Performing Repairs, Obtaining Parts And Obtaining As-required Troubleshooting Technical Support From The Component Manufacturer’s Tech Support Team. the Work To Be Done Consists Of Furnishing All Plant, Labor, Equipment, And Materials As Well As Performing All Work In Strict Accordance With The Drawings And Specifications At Fort Leavenworth, Kansas. All Work Performed By The Contractor Shall Result In A Complete And Functional Elevator. the Contract To Be Awarded Will Be For Construction In Fort Leavenworth, Within The North American Industry Classification System (naics) Code Is 236220 (commercial And Institutional Building Construction) With A Corresponding Size Standard Of $45 Million. interested Sources Are Invited To Respond To These Sources Sought Announcement Utilizing Their Company Letterhead In A Portable Document Format (pdf). responses To This Source Sought Should Be Forwarded To The Attention Of Felipe D. Zaragoza At The Following E-mail – Usarmy.leavenworth.acc-micc.mbx.construction@army.milor Felipe.d.zaragoza.civ@army.mil And Or Ms. Jennifer Walker At Jennifer.s.walker@army.mil

Description: Sensor, Ambient Temp the Defense Logistics Agency Is Issuing A Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For Nsn 6685-01-698-2840, Sensor, Ambient Temp. The Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 334419. this Item Has Technical Data Some Or All Of Which Is Subject To Export-control Of Either The International Traffic In Arms Regulations (itar) Or The Export Administration Regulations (ear), And Cannot Be Exported Without Prior Authorization From Either The Department Of State Or The Department Of Commerce. Export Includes Disclosure Of Technical Data To Foreign Persons And Nationals Whether Located In The United States Or Abroad. This Requirement Applies Equally To Foreign National Employees And U.s. Companies And Their Foreign Subsidiaries. Dfars 252.225-7048 Is Applicable To This Data. the Defense Logistics Agency (dla) Limits Distribution Of Export-control Technical Data To Dla Contractors That Have An Approved Us/canada Joint Certification Program (jcp) Certification, Have Completed The Introduction To Proper Handling Of Dod Export-controlled Technical Data Training And The Dla Export-controlled Technical Data Questionnaire (both Are Available At The Web Address Given Below), And Have Been Approved By The Dla Controlling Authority To Access The Export-controlled Data. Instructions For Obtaining Access To The Export-controlled Data Can Be Found At: Https://www.dla.mil/logistics-operations/enhanced-validation/ to Be Eligible For Award, Offerors And Any Sources Of Supply Proposed For Use Are Required To Have An Approved Jcp Certification And Have Been Approved By The Dla Controlling Authority To Access Export-controlled Data Managed By Dla. Dla Will Not Delay Award In Order For An Offeror Or Its Supplier To Apply For And Receive Approval By The Dla Controlling Authority To Access The Export-controlled Data. inspection And Acceptance At Origin there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. Drawings Are Not Available. if Your Organization Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, Email Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To 1) Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated; 2) Secure And Apply The Full Range Of Corporate Financial, Human Capital, And Technical Resources Required To Successfully Perform Similar Requirements; 3) Implement A Successful Project Management Plan That Includes: Compliance With Tight Program Schedules; Cost Containment; Meeting And Tracking Performance; Hiring And Retention Of Key Personnel And Risk Mitigation; And 4) Provide Services Under A Performance Based Service Acquisition Contract. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition, And Multiple Awards May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 9, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Annette.pruett@dla.mil. If You Have Any Questions Concerning This Opportunity, Please Contact: Annette Pruett. technical Orders And Qualification Requirements Are Not Available. appendix 1: Purpose And Objectives potential Sources Shall Be Capable Of Furnishing All Labor, Materials, Facilities And Equipment Required To Accomplish The New Manufacture Of The Item(s). Generally, This Entails The Procurement/manufacture Of Component Parts, Inspection, Testing, Preservation/packaging, And Shipping. Additionally, Potential Sources May Be Responsible For Supply Chain Management, Logistics Planning, Forecasting Production Requirements, Long-lead Time Parts Procurement, Diminishing Manufacturing Sources And Material Shortage Issues, And Shipping Serviceable Assets. The Unit Prices Will Be Established At The Time Of A Contract Award.

Details: Title: Usługi Kwestionariuszowego Badania Panelowego: „ggs-pl: Generacje I Rodziny" Dla Szkoły Głównej Handlowej W Warszawie description: 1. Przedmiotem Zamówienia Jest Realizacja W Polsce Kwestionariuszowego Badania Panelowego „ggs-pl: Generacje I Rodziny” (ggs – Generations And Gender Survey), Na Reprezentatywnej Próbie Kobiet I Mężczyzn W Wieku 18-59 Lat, Z Wykorzystaniem Mieszanych Metod Zbierania Danych: Wywiady Bezpośrednie Wspierane Komputerowo (computer Assisted Personal Interviews /capi) I Ankiety Internetowe (computer Assisted Web Interviews /cawi). 2. Badanie Realizowane Jest W Ramach Projektu Pt.: „ggp-pl: Generacje I Rodziny. Panelowe Badanie Przemian Relacji Między Pokoleniami, W Rodzinie Oraz Między Kobietami I Mężczyznami” Finansowanego Z Programu Ministra Nauki „wsparcie Udziału Polskich Zespołów Naukowych W Międzynarodowych Projektach Infrastruktury Badawczej”. 3. Badanie Obejmuje: • Realizację W Polsce Dwóch Fal Międzynarodowego Badania Panelowego Ggs-pl, Przy Czym Fale Zostaną Zrealizowane W Odstępie Trzech Lat We Współpracy Z Międzynarodową Infrastrukturą Badań Społecznych „generations And Gender Programme” (ggp), Koordynowaną Przez Niderlandzki Interdyscyplinarny Instytut Demograficzny (nidi) W Hadze; • Realizację Dodatkowego Badania Lokalnego (tzw. Fali 1.5) W Połowie Okresu Pomiędzy Falami Właściwymi. 4. Badanie Umożliwi Pozyskanie Informacji O Przeszłości (biografii) Respondenta (w Szczególności Sytuacji W Jego Domu Rodzinnym, Historii Formowania I Rozpadu Związków Oraz Rodzenia Dzieci), A Także Podstawowych Informacji O Historii Zawodowej I Migracyjnej, Sytuacji Bieżącej (sytuacja Materialna, Zawodowa, Rodzinna, Mieszkaniowa, Stan Zdrowia I Kondycja Psychiczna, Sieci Społeczne, Poglądy, Opinie I Wyznawane Wartości), A Także Zamierzeń Respondenta Na Przyszłość (dotyczących Formowania Związków, Posiadania Dzieci, Podejmowania Pracy Zawodowej Czy Rezygnacji Z Aktywności Zawodowej). W Kwestionariuszu Ggs Kładzie Się Również Szczególny Nacisk Na Relacje Pomiędzy Dziećmi I Rodzicami (pokoleniami) Oraz Pomiędzy Partnerami (role Kobiet I Mężczyzn). Ponadto Dużo Uwagi Poświęca Się Jakości Tych Relacji, W Tym Satysfakcji Ze Związków Oraz Bliskości Kontaktów. 5. Zakres, Warunki I Sposób Realizacji Przedmiotu Zamówienia Określone Zostały W Poniższych Załącznikach Do Swz: 1) Załącznik Nr 3 Do Swz – Opis Przedmiotu Zamówienia; 2) Załącznik Nr 4 Do Swz – Wzór Umowy.

Details: This Sources Sought Notice Is For Informational And Planning Purposes Only And Shall Not Be Construed As A Solicitation, An Obligation Or Commitment By The Albuquerque Area Indian Health Service. This Notice Is Intended Strictly For Market Research To Determine If A 100% Set Aside For Indian Small Business Economic Enterprise Or If A 100% Set Aside For Small Business Concerns Can Fulfill The Requirements Set Forth In This Request For Information. this Is A Request For Information Only, Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. The Purpose Of This Notice Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification/socioeconomic Status (indian Small Business Economic Enterprise (isbee) Or Other Small Businesses Categories). the Albuquerque Area Indian Health Service Is Conducting A Market Survey To Help Determine The Availability Of The Following Service: naics Code: 339112 description: Surgical And Medical Instrument Manufacturing trophon2 Automated Ultrasound Probe High-level Disinfection Unit Qty: 01,(far 52.211-6 Brand Name Or Equal) printer Usb Cable Qty: 01, annual Preventive Maintenance Plan Qty: 04, the Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Whether A Set-aside Is Appropriate. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It Will Be Announced On Federal Business Opportunities Website, Http://www.sam.gov, At A Later Date, And All Interested Parties Must Respond To The Solicitation Announcement Separately From The Responses To This Announcement In Order To Be Considered. interested Parties Are Required To Submit: if Your Business Can Provide This Type Of Service, Submit A Capability Statement - Include Company Name, Address, Point Of Contact, Unique Entity Number, Size Of Business Pursuant To North American Industrial Classification System (naics). summary Of Relevant Performance History (with Points Of Contact And Applicable Telephone Numbers, Addresses And Email Addresses, If Available). interested Parties Are Required To Be Registered And Certified In The System For Award Management (sam), Https://www.sam.gov. what Is Your Socioeconomic Status-is Your Business An Indian Small Business Economic Enterprise (isbee)? Is Your Firm A Veteran Owned Small Business? A Certified Service-disabled Veteran Owned? Is Your Firm A Woman-owned Business? Is Your Business A Small Business? complete Indian Economic Enterprise Representation Form. submit All Information To Shannon Eldridge-shorty Via E-mail: Shannon.eldridge-shorty@ihs.gov; No Later Than January 07, 2025 By 03:00 Pm (mt).