Survey Tenders

Details: Schedile A:all That Piece And Parcel Of The Property Bearing Registered Sale Deed No 663/2018, Dated 12/04/2018, Chittor Dist, Sri Balaji Registration District, Tirupati, Tottembedu Mandall, In Tottembedu Survey Group Of Eedulagunta, Chilukavari Kandriga In Sy No 32/2 (ac 0.19 Cents), Sy No 32/3 (ac 0.35 Cents), Sy No 32/4a (ac 0.02 Cents), Sy No 32/4c (ac 0.88 Cents), Sy No 33/4 (ac 0.17 Cents) In Totall Ac 1.68 Cents Vacant Site Having P Nos 35, 36, 37part, 38, 39, 40, 41, 42& 43 With Boundaries Bounded By East: 16 Feet Set Back, South: 16 Feet Set Back, West: 10 Feet Set Back & 30 Feet Wide Road, North: 16 Feet Set Back Admeasuring In Total 11730 Sft Or 1303.33 Sqydsschedule B; Undivided Share Of Land Of 32.58 Sqyds As Mentioned In Schedule C & Common Flats In Mayuri Towers For Joint Usageschedule C; A Schedule Property In Mayuri Towers Having A Fourth Floor Bearing Flat No 307, D No 7-51/plot No 37, Assesment No 484, With 1005 Sft Build Up Area Bounded By East: Open To Sky, South: Open To Sky, West: Open To Sky, North: Common Corridor

Description: This Is A Sources Sought Synopsis Only And Does Not Constitute A Solicitation Announcement. This Is Not A Request For Proposals Or A Quote And In No Way Obligates The Government To Award Any Contract. This Sources Sought Is For Information And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government. This Is Not A Solicitation Announcement For Quotes/proposals And No Contract Will Be Awarded From This Announcement. This Sources Sought Notice Has Been Issued To Survey The Market And Assist The United States Coast Guard (uscg) In Determining Possible Sources For Consideration. All Firms Responding To This Sources Sought Notice Are Advised That Their Response To This Notice Is Not A Request To Be Considered For A Contract Award. the Uscg Is Conducting Market Research To Seek Sources That Have The Capability To Repair The Following Item: nsn: 6340-01-505-9569 part Number: 70553-85806-102 alternate Niin: 6340-01-hs3-4305 alternate Part Number: 70-0396-3 description: Repair Of Dimmer Assy potential Sources Must Be Able To Provide Traceability Back To One Of The Original Equipment Manufacturers (oems), Grimes Aerospace (cage Code 72914), Sikorsky Aircraft Corporation (sac – Cage Code 78286) Or Honeywell (cage Code 02lu7). responses responses To This Notice Should Include Company Name, Address, Telephone Number, And Point Of Contact (poc). Responses Should Include Approximate Lead-time For Delivery Of Part. Please Respond To The Following Questions: is Your Business A Large Or Small Business And How Many Employees? what North American Industry Classification System (naics) Code Does Your Company Use For This Type Of Service? if Small, Does Your Firm Qualify As A Small, Emergent Business, Or A Small, Disadvantaged Business? if Disadvantaged, Specify Under Which Disadvantaged Group And Is Your Firm Certified Under Section 8(a) Of The Small Business Act? is Your Firm A Certified Hub Zone Firm? is Your Firm A Woman-owned Or Operated Business? is Your Firm A Certified Service-disabled Veteran-owned? is Your Product Listed On A General Services Administration (gsa) Schedule? do You Have Other Government Agencies Using The Product, And If So Which Agencies, Pocs And Contract Numbers? if Possible, Provide Pocs For Civilian Users For General Usage Of Product Questions. after The Review Of The Responses To This Sources Sought Announcement, And If The Uscg Still Plans To Proceed With The Acquisition, A Solicitation Announcement Will Be Published On The Sam.gov Website. Responses To This Sources Sought Synopsis Are Not Adequate Responses To Any Future Solicitation Announcement. All Interested Offerors Will Have To Respond To The Solicitation In Addition To Responding To This Sources Sought Synopsis. Responses To This Sources Sought Synopsis Are Not A Request To Be Added To A Prospective Offerors List Or To Receive A Copy Of The Solicitation. closing Date And Time For Receipt Of Response Is 07 January 2025 @ 2:00pm Est. E-mail Responses Are Preferred And May Be Sent To Amy.e.whitehurst2@uscg.mil, Attention Amy Whitehurst. Please Indicate 70z03825ij0000013 In The Subject Line.

Description: The Defense Logistics Agency Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For Nsn 2840 -011001680, Seal, Air, Aircraft G. This Oem Is General Electric Co, Cage 99207. The Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 336412. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. Drawings Are Not Available. if Your Organization Has The Potential Capacity Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, Email Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To 1) Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated; 2) Secure And Apply The Full Range Of Corporate Financial, Human Capital, And Technical Resources Required To Successfully Perform Similar Requirements; 3) Implement A Successful Project Management Plan That Includes: Compliance With Tight Program Schedules; Cost Containment; Meeting And Tracking Performance; Hiring And Retention Of Key Personnel And Risk Mitigation; And 4) Provide Services Under A Performance Based Service Acquisition Contract. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition, And Multiple Awards May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By January 8, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Cindy.hunt@dla.mil. if You Have Any Questions Concerning This Opportunity, Please Contact: Cindy Hunt (804) 971-7217. appendix 1: Purpose And Objectives potential Sources Shall Be Capable Of Furnishing All Labor, Materials, Facilities And Equipment Required To Accomplish The New Manufacture Of The Item(s). Generally, This Entails The Procurement/manufacture Of Component Parts, Inspection, Testing, Preservation/packaging, And Shipping. Additionally, Potential Sources May Be Responsible For Supply Chain Management, Logistics Planning, Forecasting Production Requirements, Long-lead Time Parts Procurement, Diminishing Manufacturing Sources And Material Shortage Issues, And Shipping Serviceable Assets. The Unit Prices Will Be Established At The Time Of A Contract Award. the Specific Requirement For This Effort Is Below: part: 5034t70p04 nsn: 2840-011001680 nomenclature: Seal, Air, Aircraft G estimated Annual Qty: 780 Each technical Orders And Qualification Requirements Are Not Available.

Details: Background: Water Survey Of Canada (wsc) Of Environment And Climate Change Canada (eccc) Collects Water Quantity Data. As The Equipment That Collects The Data Is Dispersed Across The North On Remote Rivers And Lakes, Access To A Large Majority Of These Locations Requires Use Of Aircraft. Charters Leaving Fort Simpson To Access These Remote Locations In The Northwest Territories (nwt). Objective: Wsc Requires A Rotary Wing Aircraft (helicopter) Capable Of Transporting Hydrometric Technologists, Herein Referred To As Eccc Passengers, And Their Equipment To Remote, Off Strip, Hydrometric Sites, Landing On Lakes And Rivers In The Northwest Territories (nwt). The Aircraft Is Expected To Transport Eccc Passengers And Equipment From Fort Simpson To Each Site, Stay On Site With The Eccc Passengers While They Conduct Their Work Of Surveying, Working From Boats, Collecting Water Quality Samples, Discharge Measurements And Conducting Station And Site Maintenance. Aircraft Requirements: The Contractor’s Base Of Operations Must Have A Heated Indoor Washroom. The Aircraft Must Have The Following: • Gps • Elt • Satellite Tracking • Satellite Phone • First Aid/survival Kit Equipment Consists Of Large, Irregularly Shaped Containers, Long/sharp Objects, Lumber, Dangerous Goods (compressed Gas Cylinders And Gas Motors Boat Motor, Generator, Fuel Can, Etc.). Total Weight, Including Eccc Passengers, Can Be Up To 830kg Although Space Required To Accommodate The Equipment Will Generally Be Exhausted Before The Weight Threshold Is Exceeded. Each Site Visit Can Be 1-3 Hours And Pilots Should Have Personal Gear To Reflect The Weather/seasonal Conditions. Travel: All Flight Tours Will Initiate And Finish In Fort Simpson, Nt. Eccc Will Not Be Responsible For Expenses Incurred To Reposition The Aircraft To Or From Fort Simpson, Nt. No Inherent Travel Or Ferry Costs Will Be Paid To The Contractor To Reach The Point Of Departure (fort Simpson, Nt.) To Begin The Work. Term Of Contract Period Of The Contract The Period Of The Contract Is From Date Of Contract To March 31, 2026 Inclusive Option To Extend The Contract The Contractor Grants To Canada The Irrevocable Option To Extend The Term Of The Contract By Up To Two (2) Additional One (1) Year Period Under The Same Conditions. The Contractor Agrees That, During The Extended Period Of The Contract, It Will Be Paid In Accordance With The Applicable Provisions As Set Out In The Basis Of Payment. Canada May Exercise This Option At Any Time By Sending A Written Notice To The Contractor At Least Fifteen (15) Calendar Days Before The Expiry Date Of The Contract. The Option May Only Be Exercised By The Contracting Authority, And Will Be Evidenced For Administrative Purposes Only, Through A Contract Amendment. Comprehensive Land Claims Agreements (clcas) The Contract Is Subject To The Following Comprehensive Land Claims Agreement(s): Gwich’in Comprehensive Land Claims Agreement Inuvialuit Final Agreement Sahtu Dene And Metis Comprehensive Land Claims Agreement Tlicho Land Claims Agreement

Details: Sources Sought Notice For Market Research Only– This Notice Does Not Constitute A Solicitation Announcement Or Restrict The Government To An Ultimate Acquisition Approach And No Award Will Occur From This Notice. No Solicitation, Specifications, Or Drawings Are Available For This Notice. this Is A Sources Sought Notice To Determine The Capabilities Of Both Small And Large Business Firms. Small Firms Interested In Performing This Work Are Strongly Urged To Respond To This Notice. Two Or More Small Firms Capable Of Performing This Work Will Help To Guide The Acquisition Strategy And Influence Potential Set-aside. Responses To This Sources Sought Notice Will Be Used By The Government To Make Appropriate Acquisition Decisions. This Is Not A Request For Proposal (rfp) Or Invitation For Bid (ifb) And Is For Market Research Purposes Only. no Basis For Claim Against The Government Shall Arise As A Result Of A Response To This Sources Sought Notice. The Government Will Not Pay For Information Or Comments Provided And Will Not Recognize Any Cost Associated With The Submission Of Responses Or Comments. project Description: the U.s. Army Corps Of Engineers Detroit District Is Seeking Information On Potential Sources That Have The Capability To Provideabatement And Disposal Of Lead Paint From The Poe Lock And Macarthur Lock Chamber Buttons As Well As From Three Doors At The New Power Plant In Sault St. Marie, Mi. The Contractor Will Use Sponge Blasting And/or Needle Gun Abatement Techniques. The Contractor Will Collect Air Samples For Lead Analysis During Paint Abatement Activities. Waste Will Be Taken To An Appropriate Landfill By The Contractor. the Result Of This Market Research Will Contribute To Determining The Method Of Procurement For This Requirement. Based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses (in Full Or In Part) Or Procured Through Full And Open Competition. All Small Business Set-aside Categories Will Be Considered. Telephone Inquiries Will Not Be Accepted Nor Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Submissions. instructions: if You Desire To Participate In The Market Research, Please Complete The Attached Sources Sought Survey And Return To The Primary Point Of Contact Listed Below. Failure To Provide A Complete Response May Result In The Government Being Unable To Adequately Assess Your Capabilities. Any Information Submitted By Respondents To This Sources Sought Synopsis Is Voluntary. As Stipulated In Federal Acquisition Regulation 15.201, Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Any Information Submitted By Respondents To This Sources Sought Synopsis Is Voluntary And Will Not Be Returned. The Government Will Not Reimburse Any Costs Incurred Or Associated With The Submission Of Information In Response To This Notice. The Decision To Solicit For A Contract Shall Be Solely Within The Government's Discretion. additional Company Capability Information Is Welcome. Your Company's Response Is Limited To 25 Pages. All Attachments Must Be Provided In Either Microsoft Word, Excel, Or Adobe Acrobat Pdf Format. Attachments With Files Ending In ".zip" Or ".exe" Are Not Allowable And Files Will Be Stripped And Deleted From Any Emails Received By The Government. Ensure Only .pdf, .docx, Or .xls(x) Documents Are Attached To Your Email.please Send Responses By No Later Than 2:00 Pm Est On January 6, 2025.please Reference "sources Sought: Lead Paint Removal Sault St. Marie" In The Subject Line. please Respond To Sources Sought Survey In The Attachment And Email It To Lre-proposal@usace.army.mil, Sally.artz@usace.army.mil, And Stephanie.m.craig@usace.army.mil. if You Have Any Questions Or Concerns, Please Use Aforementioned Emails. Your Prompt Attention And Response To This Notice Is Greatly Appreciated. All Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Fully Protected From Any Release Outside The Government.

Details: The U.s. Army Corps Of Engineers, New England District Is Issuing A Sources Sought Announcement For A Maintenance Dredging Project Located In New Haven, Ct. This Announcement Is To Determine The Interest, Availability, And Capability Of Hubzone, Service-disabled Veteran-owned, And Small Business Concerns As Described Below. The Naics Code For This Procurement Is 237990. The Project Is Planned To Be Issued On Or About April 15, 2025. The Construction Will Occur In The Fall/winter Of 2025/26 And Is Expected To Take 4 To 6 Months To Complete. The Estimated Construction Cost Is Between $10,000,000.00 And $25,000,000. the New Haven Harbor O&m Dredging Project Consists Of Dredging The 35-foot Navigation Channel And 35-foot Turning Below Mean Lower Low Water (mllw) From Long Island Sound To The Confluence At The Quinnipiac River. Approximately 800,000 Cubic Yards Of Predominantly Silt And Very Fine Sand Material Will Be Dredged From The 35-foot Main Channel And 35-foot Turning Basin During This Phase Of The Project. It Is Expected That A Mechanical Dredge Will Remove Material From The Shoaled Portions Of New Haven Harbor Channel And Place It Into Scows Before Being Delivered To The Central Long Island Sound Disposal Site. Dredging And Disposal Operations Are Anticipated To Take Four Months, And Will Be Performed During The Period From October 1, 2025 To March 1, 2026 To Meet Environmental Time Of Year (toy) Restrictions. in Order To Accomplish All Dredging Requirements Within The Specified Dredging Window It Is Expected That The Contractor Will Need To Meet A Production Rate Of 200,000 Cy Per 30 Calendar Days. Environmental Coordination And Permitting Has Been Completed By The U.s. Army Of Engineers, New England District. interested Firms Should Demonstrate Their Project Experience, By Providing Two (2) Projects Within The Last Ten (10) Years, Which Meet The Following Requirements: • Dredging By Mechanical Means Demonstrating A Minimum Production Rate Of 175,000 Cubic Yards In One Consecutive 30-day Period. • Experience With Placement Of Dredged Material At An Open Water Placement Site In New England During The Fall/winter Months Of October Through March. interested Firms Should Submit A Capabilities Package To Include The Following: Business Classification (i.e. Hubzone, Etc.), Type Of Equipment The Firm Is Proposing To Use On The Project, And Two (2) Example Projects Performed By The Firm In The Last Ten (10) Years (including Points Of Contact For Those Projects) Showing Experience With The Proposed Equipment At The Production Rate Listed Above. Please Indicate The Team Subcontractor(s) (if Any), Including Their Prior Experience And Qualifications Meeting The Same Qualifications Listed Above, Which Will Be Used To Support The Bidder's Effort. Firms May Use Subcontractor Experience To Demonstrate Experience With The Requirements, But The Role And Work Performed By Each Team Member (prime And Subcontractors) On Projects Demonstrating That Team Member's Experience Shall Be The Same As The Role For That Team Member For This Project. Bid Bond Will Need To Be Provided With The Bid. responses Are Limited To Twenty Pages And Due By January 8, 2025. Responses Should Be Addressed To Contract Specialist Tyler Maryak At Tyler.s.maryak@usace.army.mil. The Government Will Not Pay For Any Material Provided In Response To This Market Survey Nor Return The Data Provided. This Notice Is For Information Purposes Only And Is Not A Request To Be Placed On A Solicitation Mailing List Nor Is It A Request For Proposal (rfp) Or An Announcement Of A Solicitation. The Results Of This Survey Will Be Considered To Be In Effect For A Period Of One Year From The Date Of This Notice.

Description: Clin 0001: 6105-00-912-5847 Motor, Direct Current approved Source(s) – Itt Aerospace Controls Llc (73760) P/n: 106785d100 clin 0002: 6105-01-006-2868 Motor, Direct Current approved Source(s) – Itt Aerospace Controls Llc (73760) P/n: 102650k100 clin 0003: 6105-01-370-7646 Motor, Alternating Current, approved Source(s) – Itt Aerospace Controls Llc (73760) P/n: 125322a the Amc/amsc For All Clins Is: 3 / C amc 3. Acquire, For The Second Or Subsequent Time, Directly From The Actual Manufacturer. amsc C. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing Knowledge By The Qualified Source(s) Require Acquisition Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights, Manufacturing Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. If One Source Is Approved, Amcs 3, 4, Or 5 Are Valid. If At Least Two Sources Are Approved Or If Data Is Adequate For An Alternate Source To Qualify In Accordance With The Design Control Activity's Procedures, Amcs 1 Or 2 Are Valid. primary Point Of Contact: mindy M Cook, contract Specialist please Review These Nsns Listed Above And Provide Any Sources That May Be Able To Manufacture These Items. The Approved Sources For These Nsns Are Currently Listed Above. All Information May Be Submitted Directly To The Contract Specialist Listed Above. This Information Must Be Provided By The Response Date Indicated Above. should A Company Wish To Be Reviewed And Qualified As An “approved Source”, They Must Submit An Application Package Through The Dla Land And Maritime Alternate Offer/source Approval Request (sar) Program. A Sar Package Contains All Technical Data Needed To Demonstrate That The Prospective Contractor Can Completely Manufacture The Item To The Same Level Of Quality Or Better Than The Original Equipment Manufacturer (oem). The Onus Is On The Contractor To Document And Demonstrate Their Product Is Equal To, Or Better, Than The Currently Approved Item Which Dla Land And Maritime Is Procuring. for Further Information, Please Reference The Dla Land And Maritime Webpage Shown Below For Detailed Explanation For The Information And Format Necessary For A Sar And For The Sar Approval Process. http://www.dla.mil/landandmaritime/business/selling/alternate-offers/ see Dibbs Dlad Proc Note L04 Offers For Part Numbered Items And M06 Evaluation Of Offers For Part Numbered Items. this Sources Sought Notice Is For Informational And Planning Purposes Only And Shall Not Be Construed As A Solicitation Or As An Obligation Or Commitment By The Government. This Notice Is Strictly For Market Research. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. The Purpose Of This Notice Is To Be Obtain Information Regarding The Capability And Availability Of Qualified Businesses That Are Capable Of Executing This Potential Contract. The Government Is Not Obligated And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Notice. Your Response To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method. sources Interested In Providing An Offer On The Solicitation, Should Complete The Attached Market Survey And Return The Completed Copy To Mindy Cook Via Email At Mindy.cook@dla.mil.

Details: This Is A Sources Sought Notice Only. This Is Not A Request For Proposals. There Will Not Be A Solicitation, Specifications, Nor Drawings Available At This Time. the U.s. Army Corps Of Engineers – Norfolk District Is Anticipating A Future Procurement For A Firm-fixed-price Construction Contract For Thimble Shoal Maintenance Dredging, Hampton Roads, Virginia. description Of Work: the U.s. Army Corps Of Engineers – Norfolk District Is Seeking Eligible Firms Capable Of Performing Maintenance Dredging By Hopper Dredge, By Bucket Dredge, Or A Combination Of The Two In The Thimble Shoal Channel, Part Of The Norfolk Harbor Federal Navigation Project. The Segments Are Being Dredged To Required Depth Of -56 Feet Mllw. One Foot Of Allowable Overdepth Dredging Will Be Considered As Part Of The Contract Dredging Pay Prism. Minor Areas Of New Work Dredging May Be Encountered When Performing Maintenance Dredging. Dredged Material Generated By The Project Is Expected To Be Transported And Placed Within The Cells At The Dam Neck Ocean Disposal Site (dnods). Dredging Is Estimated To Generate Approximately 1,000,000 To 1,500,000 Cubic Yards Of Pay Volume. The Contractor Shall Be Responsible For The Following: Dredging Within The Designated Areas To The Proposed Required And Allowable Pay Depths, Transporting The Dredged Material To The Dnods, Discharging The Material By Bottom Dump Method Into The Designated Government-furnished Placement Site, Performing Pre-placement And Post-placement Surveys Of The Cells Utilized At Dnods, And Communicating With The Port Of Hampton Roads Maritime Users To Minimize Impacts To Vessel Traffic, Adjacent Structures, And Other Dredging Operations. in Accordance With Dfars 236.204, The Estimated Construction Price Range For This Project Is Between $25,000,000 And $100,000,000. Naics Code 237990, Other Heavy And Civil Engineering Construction, Applies To This Project. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Synopsis. construction Time: the Work Will Commence First With Performance Beginning Within 20 Calendar Days Of Receipt Of Notice-to-proceed (ntp). The Construction Period Of Performance Will Be Approximately 325 Calendar Days From Issuance Of The Ntp. *there Are Restrictions On Hopper Dredging In The Channel. No Dredging Will Be Allowed Between September 1 And 15 November For The Protection Of Sea Turtles, So The Contractor Is Expected To Plan Their Work Accordingly. industry Survey the Following Confidential Survey Questionnaire Is Designed To Apprise The Corps Of Prospective Contractors' Project Execution Capabilities. Please Provide Your Response To The Following Questions. All Questions Are In Regard To Thimble Shoal Maintenance Dredging Project In Hampton Roads, Virginia. please Provide Company’s Name, Address, Point Of Contact, Phone Number, And E-mail Address. would You Be Interested In Bidding On The Solicitation When It Is Issued? If The Answer Is No, Please Explain Why Not? have You Worked On Jobs Similar In Nature, Complexity And Magnitude To This Project Within The Past 5 Years? have You Managed The Dredge Material Placement Sites With The Inflows Similar In Magnitude To This Project In The Past 5 Years? if So, Please Describe The Project(s) And For Whom The Work Was Performed. Indicate The Dollar Value Of The Project(s). Identify A Point Of Contact (s) And Phone Number, As A Reference Of Relevant Experience. would You Be Bidding On This Project As A Sole Contractor, Prime Contractor With Subcontractor(s) Or As A Joint Venture? is There A Dollar Limit On The Size Of Contract That You Would Bid? If So, What Is That Limit? what Is The Largest Dredging Contract, In Dollars, On Which You Were The Prime Contractor? what Is Your Bonding Capacity Per Contract? What Is Your Total Bonding Capacity? what Is Your Firm’s Business Size (e.g., Lb, Sb, 8(a), Hubzone, Sdvosb, Wob)? are You Familiar With The Safety And Health Requirements Of Em 385-1-1? please Only Include A Narrative Of The Requested Information. Additional Information Will Not Be Reviewed. This Sources Sought Synopsis Should Not Be Construed In Any Manner To Be An Obligation Of The U.s. Army Corps Of Engineers–norfolk District To Issue A Contract, Or Result In Any Claim For Reimbursement Of Costs For Any Effort You Expand Responding To This Request. No Solicitation Is Currently Available. the Government Will Utilize This Information In Determining An Acquisition Strategy. Please State All Of The Socio-economic Categories In Which Your Company Belongs—(8)(a), Hub-zone, Service Disabled Veteran Owned Small Business, Woman Owned. please Submit Capability Packages And Responses To The Above Questions Via Email To Amy Herrera Coody At Amy.h.coody@usace.army.mil, Copying Tiffany N. Kirtsey At Tiffany.n.kirtsey@usace.army.mil. Responses Must Be Submitted No Later Than 06 January 2025. the Official Synopsis Citing The Solicitation Number Will Be Issued On Sam.gov At Https://sam.gov/content/home. all Prospective Contractors Are Required To Be Registered In The System For Award Management (sam) Database Prior To Contract Award. Offerors And Contractors May Obtain Information On Registration And Annual Confirmation Requirements By Calling 1-866-606-8220 Or Via The Internet At Https://www.sam.gov . Representations And Certifications Applications Apply To This Solicitation. Representations And Certifications May Be Completed Online Via The Sam. no Attachments Or Links Have Been Added To This Opportunity.

Details: U.s. Government general Services Administration (gsa) Seeks To Lease The Following Space: state: south Carolina city: charleston delineated Area: north: Interstate 526 south: Riverland Dr To Fort Johnson Rd east: Interstate 526 To 17 East And 703 west: Interstate 526 To 17 West And 700 minimum Sq. Ft. (aboa): 23,061 maximum Sq. Ft. (aboa): 26,175 space Type: office parking Spaces (total): 0 parking Spaces (surface): 0 parking Spaces (structured): 0 parking Spaces (reserved): 0 full Term: 10 firm Term: 3 option Term: 5 additional Requirements: offered Space Must Meet Government Requirements For Fire Safety, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced Lease Is Required. Offered Space Shall Not Be In The 1-percent-annual Chance Floodplain (formerly Referred To As “100-year” Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By The Federal Acquisition Regulation (far). ). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b. the U.s. Government Currently Occupies Office And Related Space In A Building Under A Lease In Charleston, South Carolina That Will Be Expiring. The Government Is Considering Alternative Space If Economically Advantageous. In Making This Determination, The Government Will Consider, Among Other Things, The Availability Of Alternative Space That Potentially Can Satisfy The Government’s Requirements, As Well As Costs Likely To Be Incurred Through Relocating, Such As Physical Move Costs, Replication Of Tenant Improvements And Telecommunication Infrastructure, And Non-productive Agency Downtime. expressions Of Interest Due: 05/20/2024 market Survey (estimated): 05/30/2024 occupancy (estimated): 08/12/2024 send Expressions Of Interest To: name/title: willie Acree email Address: willie.acree@gsa.gov government Contact Information lease Contracting Officer willie Acree leasing Specialist broker

Details: Description Part A Facilities For The Engineer A.1.1 (10) Provision Of Living Quarter For The Engineer (rental Basis) Mo. 10.37 Total Cost (part A) Carried To Summary Php Part B Other General Requirements B.4(1) Construction Survey And Staking Km. 0.29 B.5(1) Project Billboard/signboard Each 3.00 B.7(1) Occupational Safety And Health L.s. 1.00 B.9(1) Mobilization/demobilization L.s. 1.00 B.18(2) Craneway L.s. 1.00 Total Cost (part B) Carried To Summary Php Part C Earthworks 801(1) Removal Of Structures And Obstruction L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Reinforced Concrete 900(1)c Structural Concrete (3000psi, Class-a, 28days) Cu.m. 150.95 901(1) Lean Concrete Cu.m. 156.30 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg. 9,724.24 Total Cost (part D) Carried To Summary Php Part L Flood And River Control And Drainage Part L-a Earthworks 1702(1)a Structure Excavation (common Soil) Cu.m. 294.90 1704(1)b Embankment (from Borrow) Cu.m. 5,898.00 Total Cost (part L-a) Carried To Summary Php Part L-b Bank And Slope Protection Works 1711(1) Stone Masonry Cu.m. 630.80 1712(1) Concrete Slope Protection Cu.m. 636.98 1716(6) Structural Steel Sheet Piles, Furnished M. 4,830.00 1716(12) Structural Steel Sheet Piles, Driven M. 4,724.50 Total Cost (part L-b) Carried To Summary Php