Survey Tenders

Details: The Following Is A Sources Sought Notice. This Sources Sought Is Seeking To Identify Qualified Sources Under North American Industry Classification System (naics) 541330, Engineering Services(a-e) Services. This Sources Sought Announcement Is For Market Research Information Only And Is To Be Used For Preliminary Planning Purposes. No Sf330s Are Being Requested And None Will Be Accepted In Response To This Notice. This Is Not A Solicitation For Proposals, And No Contract Will Be Awarded From This Notice. This Sources Sought Announcement Will Not Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Cost Incurred In Preparation Of A Response To This Notice. these Services Will Be Procured In Accordance With 40 U.s.c. Chap 11, Selection Of Architects And Engineers (formerly Known As The Brooks Architect Engineer Act) As Implemented In Far Subpart 36.6 And Dfars Subpart 236.6. the U.s. Army Corps Of Engineers (usace) Kansas City District (nwk) Seeks Qualified Ae Firms Interested And Capable Of Providing An Array Of Design Services For The Department Of Veteran's Affairs (dva) John Cochran Medical Center (jcmc) Located At 915 N Grand Blvd, St. Louis, Mo 63106. The Government Is Contemplating An Unrestricted (ur), A-e, Single Award Task Order Contract (satoc), Indefinite Delivery Contract Solicitation. The Estimated Ordering Limitation Of All Task Orders Issued Under The Satoc Will Have A Maximum Ordering Capacity Of One Hundred Million ($100,000,000.00) Dollars. The Base Ordering Period For This Contract Will Be Five (5) Years With One Option To Extend The Ordering Period For An Additional Five (5) Years. It Is Anticipated That A Solicitation Announcement Will Be Published In The Procurement Integrated Enterprise Environment In The 2nd Quarter Of Fy2026. firms Must Be Capable Of Performing Work To Support The Planning, Design, And Construction Phase Services For The Construction Of A New Health Care Facility And Supporting Facilities. Firms Must Be Capable Of Progressing The Current Conceptual Schematic Design Using The Collaborative Integrated Design And Construction (idac) Project Delivery Method. Idac Is A Usace Alternative Early Contractor Involvement (eci) Delivery Method That Requires Extensive Collaboration Between The Owner, Designer Of Record (dor), And Construction Manager / General Contractor. The A-e Collaboration Requirements Include Continuous Open Team Communication; Partnering; Willingness For The A-e To Incorporate Alternative Designs And Materials And Include Changes To Schedule; Phasing Plans; Specifications; Means And Methods Of Construction Throughout The Collaborative Design Progression Period That Takes Place During The Construction Contractor’s Preconstruction Phase Services. A Summary Of The Idac Delivery Method Is Attached To This Announcement. required Services May Include The Preparation Of Special Reports; Planning And Design Charrettes; Studies; Development Of Design Criteria For Performance Contracts; Design Of Construction; Documenting Basis Of Design; Developing, Updating, And Reconciling Construction Cost Estimates. The Task Orders May Include But Are Not Limited To Design Work Involving Site Investigation, Geotechnical Reports, Topographic Surveys, Preparation Of Contract Drawings, Technical Specifications, Design Analyses, Life Cycle Cost Analyses, And Continuous Real-time Computer Aided Cost Estimating And Cost Reconciliation With Third Party Estimates. Electronic Security System Design, Anti-terrorism/force Protection Design, Progressive Collapse, Seismic Design, Cyber Security, And Network Engineering May Be Required. Resiliency, Reliability, And Sustainability Will Be Important Considerations. total Building Commissioning, With A Perspective As Designer May Be Required. Construction Phase Services, Including Shop Drawing Review, Design During Construction, Site Visits, Etc., Could Be Included In Task Orders. Building Information Modeling (bim) Technologies, Cadd And Gis Deliverables May Be Required. Specific Requirements Will Be Determined Based Upon Project Requirements And Described In Each Task Order. Project Assignments Will Typically Require Performance In An Office Setting And On-site. the Kansas City District Is Soliciting Feedback From Industry As Part Of Our Market Research Efforts Associated With This Acquisition And Is Considering Various Acquisition Strategies To Deliver This Project And Requests Input From Industry. The Following Information Is Requested In This Sources Sought (ss) Announcement With A Limit Of Ten (10) Pages For Your Response: 1. Organization Name, Address, Email Address, Website Address, Telephone Number, Business Size (small Or Large), And Type Of Ownership For The Organization; Include Uei Number And Cage Code. 2. Firm's Interest In Providing An Sf330 On The Pending Solicitation Once Issued. 3. Experience: A. Evidence Of Capabilities To Perform Work Comparable To That Required For This Project (e.g. Design Of Medical Facilities And Ancillary Structures Providing A Wide Variety Of Patient Care Services, Design Of A Campus Requiring Phased Demolition And Phased Construction, Design Of Facilities Utilizing The Dva's Technical Information Library). B. Provide Three Recent Relevant/comparable Projects (not More Than Ten Years Old). Include The Project Name; Dollar Value Of The Project; Description Of The Key/salient Features Of The Project And Those That Demonstrate Similarity To The Work Required Under The Proposed Satoc; Identify The Contracting Office & The Customer/user (include Poc Information); And Identify/discuss The Acquisition Method (e.g., Sealed Bid, Best Value), Contract Type (e.g., Firm Fixed Price, Fixed Price Incentive Successive Targets [fpis], And Delivery Method (e.g., Integrated Design And Construction [idac],guaranteed Maximum Price [gmp], Design-bid-build, Design-build, Early Contractor Involvement [eci], Construction Manager As Constructor [cmc], Etc.). Responses Should Address The Firm's Capability To Construct A Hospital Or Medical Center Facility And The Challenges Associated With Large, Complex Medical Facilities. 4. Identify If, Based Upon The Scope Of This Project, You Would Form A Joint Venture To Execute This Work. Provide Joint Venture Information, If Applicable, Including Uei And Cage Code. 5. Provide The Firms Plan To Include Small Business Participation To The Maximum Extent Practicable. a Virtual Industry Day Is Planned For Thursday, December 19, 2024 At 1100 Cst. Webex Login Information Is Listed Below: 1. Join From The Meeting Link Below: https://usace1.webex.com/usace1/j.php?mtid=m5e4d4e7380c3b0f3d4796025d738aa1d 2. Join By Meeting Number Below: meeting Number (access Code): 2827 328 3747 meeting Password: N4ppp75cyc* 3. Join From A Mobile Device (attendees Only) +1-844-800-2712,,28273283747## Us Toll Free +1-669-234-1177,,28273283747## Us Toll 4. Join By Phone +1-669-234-1177 Us Toll +1-844-800-2712 Us Toll Free global Call-in Numbers | Toll-free Calling Restrictions 5. Join From A Video System Or Application dial 28273283747@usace1.webex.com you Can Also Dial 207.182.190.20 And Enter Your Meeting Number. please Send Your Sources Sought Responses Via Email To Ines.necker@usace.army.mil. Submissions Should Be Received By 11 A.m. Cst, January 6, 2025. this Synopsis Is For Market Research Purposes Only And Is Not A Request For An Sf330 Nor Does It Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Costs Incurred In Preparation Of A Response To This Notice.

Details: The Medical Technology Enterprise Consortium (mtec), In Support Of The U.s. Army Medical Research And Development Command (usamrdc), And Defense Health Agency (dha), Is Excited To Post This Request For Project Information (rpi) Focused On Surveying The Current Manufacturing Capabilities Of Single Blood Donor/storage Bags Within The Bounds Of The Contiguous United States. purpose Of The Project Information Paper: this Request For Project Information (rpi) Contains Background Material And Guidance For The Preparation Of Project Information Papers To Mtec. Project Information Papers Will Be Reviewed By The Sponsor And Used In A Manner That Shapes Dha Efforts In This Technology Space. The Results Of The Project Information Paper Submission Will Serve To Assess The Development Landscape And Potentially Focus Efforts That Will Follow. as A Note: This Rpi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. Neither Unsolicited Proposals Nor Any Other Kind Of Offers Will Be Considered For Award In Response To This Rpi. Responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rpi. All Information Received In Response To This Rpi That Is Marked “proprietary” Will Be Handled Accordingly. focus Area Of Interest: in Accord With The Department Of Defense (dod) 2022 National Defense Strategy Identifying Building Enduring Advantages, There Is An Effort To Invest In Manufacturing Capabilities Within The Continental United States (conus) As Part Of Efforts To Bolster The Defense Industrial Base (dib) And Securing Domestic Supply Chains. In Recent Years, There Has Been A Shortage Of Much needed Blood Storage Bags, And This Is Acute Within The Dod System Where There Is A Requirement For Singly Wrapped Blood Bags For Use In Far Forward Situations. “today’s Dib Requires Additional Investment From Private And Government Sources To Modernize Infrastructure And Capacity To Provide Military Capabilities At The Speed And Scale Necessary For The U.s. To Prevail In A Near‐peer Conflict. To Adapt And Fortify Our Existing Capabilities And Capacities, The Department Needs To Focus On Investment And To Buy Down Supply Chain Risk And Expand Capacity.” dod’s Diverse Warfighting Capabilities Means That Sailors, Marines, Soldiers, Airmen, Guardians And Joint Special Operations Service Members Operate In A Vast Array Of Challenging, Remote, And Austere Environments. In Forward Positions There Is A High Probability Of Traumatic Injury And Wounds Leading To Blood Loss. Hemorrhage Is The Leading Cause Of Death In Combat Zonetrauma. The Gold Standard For Immediate Treatment Of Hemorrhage Is Transfusion Of Whole Blood However, The Availability Of Whole Blood And Conventional Blood Products On Forward Missions Is Challenging. In Recent Years There Have Been Supply Chain Disruptions Across The Continuum Of Military And Civilian Products. This Includes Components Used In The Manufacture Of Blood Bags From The Polymer Components To The Anticoagulant/preservative Solutions Within The Bag. This Has Resulted In Shortages Of Single Blood Storage Kits Most Often Used In Austere Environments Especially For Walking Donors. According To The Us Food And Drug Administration center For Biologics Evaluation And Regulation For Regulated Products Shortages Website, The Shortage Of Series Of Blood Collection Bag Kits And Products Is Described As Ongoing. Shortages Of Ingredients, Components And Manufacturing Supplies, And Release Timing Issues Are Intermittent And Unpredictable. Product May Be Placed On Allocation As Necessary To Manage Reduced Or Unavailable Supply. This Vital Product Is Needed In Steady Supply To Meet The Needs Of Aiding Wounded Warriors Within The Golden Hour, Or Sooner, Out In The Field At The Point Of Injury With Donated Blood. Our Approach Is To Stand Up Or Bolster Domestic Production. the Government Seeks Project Information Papers Regarding The Development Of A Prototype System Detailing The Following: production Of A Bag Within The Contiguous United States Within 2 Years Of Award That Meets The Following Existing Specification: individually Wrapped Single Aseptic Collection Bag compliant With Fda (21 Cfr 864.9100), Iso 10993 And 3826, Usp And Mil 810h Standards And Guidance. supports Whole Blood Donor Phlebotomy Of 500ml (+/‐10%, 450‐550 Ml) Or 450 Ml (+/‐10%, 405‐495 Ml). contains A Solution Of Anticoagulant And Preservatives Meeting The Usp Standards That Allows For Storage Of Blood For At Minimum 21 Days Up To 35 Days. foil Wrapping That Is Easy To Open Requiring No Tools And If Practical, Textured For Better Grip With Brightly Marked Notches Not Only At The Corners But Also In The Center Of The Packaging. the Manufactured Bags Should Have A Shelf Life Of 18 ‐ 24 Months At Room Temperature. appropriate Fatigue And Distortion Testing. experience Designing Medical Devices Specifically Blood Products And Adhering To Verification And Validation Guidance. within 2 Years, Capability To Manufacture No Less Than 10,000 Standard Blood Donor/storage Bags Per Year And Have A Surge Capability Plan During Times Of Increased Demand For Full Single Blood Bag Kits With Compliant Materials And Processes. any Established Current Good Manufacturing Practice (cgmp) Ready Methods With Fully Designed Hardware And Functional Disposables. manufacturers Implementing Gmp That Require Financial Assistance To Meet All Requirements Of The U.s. Food And Drug Administration (fda) With Clear Standardoperating Procedures And Compliance Documentation (21 Cfr 864.9100) Shall Provide Appropriate Substantiating Information, Including A Workflow For Obtaining Gmp Certification. demonstrable Redundancy In Sourcing Of Raw Materials From Multiple Vendors. a Notional Rough Order Of Magnitude Estimate Of Proposed Program Cost Inclusive Of Any Cost Share And Other Funding Sources That The Offeror Has Secured. requirements Of The Project Information Paper: project Information Papers Should Clearly Describe Expertise In Each Of The Aforementioned Areas As It Relates To The Manufacturing Of Blood Bags. Interested Parties Are Encouraged To Submit Project Information Papers Using The Template Included In Addendum 1 Of This Rpi. mtec Is Seeking Input From Both Mtec Members And Non‐members Via A Project Information Paper To Be Considered By The Government. Project Information Papers Will Be Shared With The Reviewers Under Non‐disclosure Agreements. project Information Papers May Be Submitted At Any Time During The Submission Period But No Later Than The Due Date And Time Specified On The First Page Of This Rpi Using Bids: Https://submissions2.ati.org/ati2/portal.nsf/start?readform. See Addendum 2 Of This Rpi For Further Information Regarding Bids Registration. Mtec Membership Is Not Required For Submission Of Project Information Paper. mtec: the Mtec Mission Is To Assist The U.s. Army Medical Research And Development Command (usamrdc) And The Defense Health Agency (dha) By Providing Cutting‐edge Technologies And Supporting Life Cycle Management To Transition Medical Solutions To Industry That Protect, Treat, And Optimize Warfighters’ Health And Performance Across The Full Spectrum Of Military Operations. Mtec Is A Biomedical Technology Consortium Collaborating With Multiple Government Agencies Under A 10‐year Renewable Other Transaction Agreement (ota), Agreement No. W81xwh‐15‐9‐0001, With The U.s. Army Medical Research Acquisition Activity (usamraa). Mtec Is Currently Recruiting A Broad And Diverse Membership That Includes Representatives From Large Businesses, Small Businesses, “nontraditional” Defense Contractors, Academic Research Institutions And Not‐for‐profit Organizations. points Of Contact: for Inquiries, Please Direct Your Correspondence To The Following Contacts: technical And Membership Questions Should Be Directed To The Mtec Biomedical Research Associate, Dr. Chuck Hutti, Ph.d., Chuck.hutti@ati.org all Other Questions Should Be Directed To The Mtec Program Manager, Mr. Evan Kellinger, Mtec‐sc@ati.org

Details: Corrected Postponed Due To Winter Weather Public Notice Soq 24-039 The Parish Of Jefferson, Authorized By Resolution No.145367 Is Hereby Soliciting Statements Of Qualifications (tec Professional Services Questionnaire) From Persons Or Firms Interested And Qualified To Provide Professional Engineering Services Related To The Design And Construction Of The 6th Street Bridge At Keyhole Canal (council District 2). Deadline For Submissions: 3:30 P.m., January 31, 2025 General The Scope Of Work Associated With This Project Consists Of The Replacement Of The 6th Street Bridge At Keyhole Canal And Incidental Work As Needed. Project May Include The Following Supplemental Services: Load Rating In Accordance With The Ladotd Bridge Design And Evaluation Manual, Surveying, And Geotechnical Services. Compensation Compensation For The Required Design Services Will Be Made On An Hourly Rate Basis Or A Fixed Fee Basis, Or A Combination Of Both, Depending On Scope And Complexity Of The Work. The Parish Reserves The Right To Determine The Method Of Payment (hourly Or Fixed) For Each Individual Assignment. For Hourly Rate Work, The Firm Shall Be Compensated By The Appropriate Jefferson Parish Department On The Basis Of Their Certified And Itemized Burdened Rate In Accordance With Guidelines Established In The Ldotd Standard Rates Contained In Attachment “a” To The Standard Professional Services Agreement For Jefferson Parish. A Copy Of Attachment “a” May Be Obtained By Calling The Jefferson Parish Department Of Capital Projects At (504) 736-6833. For Fixed Fee Work, The Fee Shall Be Negotiated With The Firm By The Jefferson Parish Department Of Engineering And Shall Be Mutually Agreeable To Both Parties. Compensation For Supplemental Services, If Required, Shall Be In The Form Of A “lump Sum” Or Hourly Rate For Each Supplemental Service, Which Shall Be Mutually Agreeable To The Parish And The Consultant. All Costs Associated With This Project Shall Be Subject To Jefferson Parish Review And Approval. Minimum Requirements For Selection The Persons Or Firms Under Consideration Shall Have At Least One (1) Principal Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana. A Subcontractor May Not Be Used To Meet This Requirement. (section C. Of Tec Professional Services Questionnaire); The Persons Or Firms Under Consideration Shall Have A Professional In Charge Of The Project Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana With A Minimum Of Five (5) Years’ Experience. A Subcontractor May Not Be Used To Meet This Requirement. (section K. “professional In Charge Of Project:”; Of Tec Professional Services Questionnaire); The Persons Or Firms Under Consideration Shall Have One (1) Employee Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana In The Applicable Discipline Involved. A Subcontractor May Meet This Requirement Only If The Advertised Project Involves More Than One Discipline (section D. Of Tec Professional Services Questionnaire). With Regard To The Questionnaire, Principal Means The Sole Proprietor Of The Firm, Or One Who Shares An Ownership Interest With Other Persons In The Firm, Including But Not Limited To, A Partner In A Partnership, A Shareholder In A Corporation, Or A Member Of A Limited Liability Corporation. Evaluation Criteria The Following Criteria Will Be Used To Evaluate Each Firm Submitting A Statement Of Qualifications: Professional Training And Experience In Relation To The Type And Magnitude Of Work Required For The Particular Project - 35 Points; Size Of Firm, Considering The Number Of Professional And Support Personnel Required To Perform The Type Of Engineering Tasks, Including Project Evaluation, Project Design, Drafting Of Technical Plans, Development Of Technical Specifications And Construction Administration – 10 Points; Capacity For Timely Completion Of Newly Assigned Work, Considering The Factors Of Type Of Engineering Task, Current Unfinished Workload, And Person Or Firm’s Available Professional And Support Personnel. – 20 Points; Past Performance On A Project In Which The Person Or Firm Assisted A Governmental Entity In Dealings With Disaster Recovery And Any Other Projects Relating To Cdbg - 10 Points (respondent Should Provide A List Of Completed Disaster Recovery Projects And/or Similar Cdbg Projects For Which Firm Has Provided Verifiable References. Location Of The Principal Office - 15 Points (preference Shall Be Given To Persons Or Firms With A Principal Business Office As Follows: (a) Jefferson Parish, Including Municipalities Located Within Jefferson Parish (15 Points); (b) Neighboring Parishes Of The Greater New Orleans Metropolitan Region, Which Includes Orleans, Plaquemines, St. Bernard, St. Charles And St. Tammany Parishes (12 Points); (c) Parishes Other Than The Foregoing (10 Points); (d) Outside The State Of Louisiana (6 Points).) Location Of The Principal Office Shall Only Factor Into The Evaluation Criteria If Adequate Competition (two Or More Firms That Are Responsive And Responsible) Are Located Within Jefferson Parish; Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services, In Which The Parish Prevailed Or Any Ongoing Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services Excluding Those Instances Or Cases Where The Person Or Firm Was Added As An Indispensable Party, Or Where The Person Or Firm Participated In Or Assisted The Public Entity In Prosecution Of Its Claim - 15 Points (in The Event That The Person Or Firm Fails To Provide Accurate And Detailed Information Regarding Legal Proceedings With The Parish, Including The Absence Of Legal Proceedings, The Person Or Firm Shall Be Deemed Unresponsive With Regard To This Category, And Zero (0) Points Shall Be Awarded.); Prior Successful Completion Of Projects Of The Type And Nature Of Engineering Services, As Defined, For Which Firm Has Provided Verifiable References - 5 Points; Project Will Include Federal Disaster And Resiliency Funds And Therefore Will Include Associated Federal Requirements, Including Section 3, As Applicable. Statements Of Qualifications From Minority, Female-owned, And Local Firms / Individuals Are Invited. Each Firm’s Lowest And Highest Score Shall Be Dropped And Not Count Towards The Firm’s Score. Only Those Persons Or Firms Receiving An Overall Cumulative Score Of At Least Seventy (70) Percent Or Greater, Of The Total Possible Points For All Categories To Be Assigned By The Participating Technical Evaluation Committee Members Shall Be Deemed Qualified To Perform These Professional Services. All Firms (including Sub-consultants) Must Submit A Statement Of Qualifications (tec Professional Services Questionnaire). Please Obtain The Latest Questionnaire Form By Calling The Purchasing Department By Telephone At (504) 364-2678 Or Using Our Web Address: Https://www.jeffparish.gov/27/government. This Questionnaire Can Be Accessed By Clicking On The + Next To “doing Business In Jefferson Parish” On The Website And Clicking On “professional Services Questionnaires”. Submissions Will Only Be Accepted Electronically Via Jefferson Parish’s E-procurement Site, Central Bidding At Www.centralauctionhouse.com Or Www.jeffparishbids.net. Registration Is Required And Free For Jefferson Parish Vendors By Accessing The Following Link: Www.centralauctionhouse.com/registration.php. The Firms Submitting A Statement Of Qualifications (tec Professional Services Questionnaire) Must Identify All Sub-consultant Firms Which They Expect To Use To Provide Professional Services, And Submit A Statement Of Qualifications (jefferson Parish Tec Professional Services Questionnaire) For Each Sub-consultant Firm. (refer To Jefferson Parish Code Of Ordinances, Section 2-928). No Submittals Will Be Accepted After The Deadline. Affidavits Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Insurances Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Disputes/protests Relating To The Decisions By The Evaluation Committee Or By The Jefferson Parish Council Shall Be Brought Before The 24th Judicial Court. Adv: The New Orleans Advocate: December 4, 11, 18, And 25, 2024, And January 15, 2025 Corrected Postponed Due To Winter Weather: January 29, 2025

Details: Amendment 0004: amendment 0004 Is Issued To Extend The Sf 330 Submission Date Regarding N0016425r1025. amendment 0003: amendment 0003 Is Issued To Provide Answers To Industry Questions Received Thus Far Regarding N0016425r1025. amendment 0002: amendment 0002 Is Issued To Provide Answers To Industry Questions Received Thus Far Regarding N0016425r1025. amendment 0001: amendment 0001 Is Issued To Provide Answers To Industry Questions Received Thus Far Regarding N0016425r1025. original Posting: n0016425r1025 Indefinite Delivery/indefinite Quantity (idiq) Contract For Multi‐ Discipline Architect‐engineer (a‐e) Services In Support Of Naval Surface Warfare Center Crane Division (nswc Crane) Facilities Projects At Naval Support Activitys Crane (nsa Crane), Crane, Indiana And Lake Glendora Test Facility (lgtf), Sullivan In. description: All Information Needed For Interested Parties To Submit A Standard Form Sf 330, Architect Engineer Qualifications Is Contained Herein. There Is No Separate Request For Proposals (rfp) Package To Download. related Notices: N0016422snb83, N0016424snb55, N0016424r1025, N0016424snc12, N0016425snb08 background: the Naval Surface Warfare Center Crane Division (nswc Crane) Requires A-e Services In Support Of Various Projects At Nsa Crane And Lgtf. This Procurement Will Result In One Single-award Idiq Contract For Multi‐discipline A‐e Services For Planning, Design, Construction, Evaluation Of New Construction, And Renovation Projects. These Services Will Be Procured In Accordance With 40 United States Code (usc) Chapter 11, Selection Of Architects And Engineers, As Implemented By Federal Acquisition Regulation (far) Subpart 36.6. The Idiq Contract Will Be For A Five-year Ordering Period. This Is A Five-year Contract, With No Option Years. The Maximum Value For The Contract Term, Including All Awards, Shall Not Exceed $12,000,000. There Will Be No Minimum Dollar Limit Per Order And The Maximum Dollar Limit Per Order Will Be $5m In Compliance With The $9m Fy24 Ndaa Prescription. The Guaranteed Minimum For The Contract Ordering Period Is $5,000 And Will Be Satisfied By Simultaneous Award Of The Initial Task Order With The Basic Contract. Firm‐fixed Price Task Orders Will Be Negotiated At The Task Order Level. In Accordance With Dfars Subpart 236.6, The Contract Price Or The Estimated Cost And Fee For Production And Delivery Of Designs, Plans, Drawings, And Specifications Shall Not Exceed Ten (10) Percent Of The Estimated Construction Cost Of The Public Work Or Construction, Excluding Fees. there Will Be No Minimum Dollar Limits Per Task Order. The Estimated Award Date Is October 2025. this Proposed Contract Is Anticipated To Be A Full And Open Procurement. The North American Industry Classification System (naics) Code Is 541330, Engineering Services, And The Small Business Size Standard Is $25,500,000. The Product And Services Code (psc) Is C219 Architect And Engineering- General: Structural Engineering. The Government Seeks The Most Highly Qualified Firm To Perform The Required Services, Based On The Demonstrated Competence And Qualifications, In Accordance With The Selection Criteria Included Herein. comprehensive A‐e Services Are Required For The New Construction, Repair, Replacement, Demolition, Alteration, And/or Improvement Of Facility Projects. Projects May Include Single Or Multiple Disciplines, Such As: Structural, Civil, Mechanical, Electrical, Architectural, Planning, Environmental, Fire Protection, Cost Estimating, And/or Geotechnical. The Types Of Projects May Include: Building Renovations; Building Additions; Site Work Required To Support New Work; New Construction; Parking Areas; Foundations; Retaining Walls; Failure Investigation Including Destructive And Non‐destructive Testing; Seismic Evaluation And Design; Progressive Collapse Analysis; Blast Resistant Design; Structural Engineering Investigations; Utility Systems Including sanitary And Storm; Water Systems; Electrical Power Systems, Storm Water Management; Surveying; Pavement Design; And Civil Engineering Studies. the Selected Offeror Will Be Solely Responsible For The Designs Produced On The Resulting Task Order Contracts And Will Be Recorded As The Designer Of Record. The Successful Offeror Shall Also Be Accountable And Responsible For Contributions To Design-build Rfp Preparation And All Other Requirement Submittals To The Government. in Accordance With Far 36.604 And The Supplements Thereto, And Upon Final Acceptance Or Termination, All Task Orders Above $35,000 Will Receive A Performance Evaluation. A Performance Evaluation May Be Prepared For Lesser Task Orders And Interim Performance Evaluations May Be Prepared At Any Time. Performance Evaluations Will Be Maintained For Use In Future Source Selections For Architect-engineer Services. performance Location(s): crane, Indiana sullivan, Indiana requirements: for Complete Details On This Requirement See Attachment 1, “statement Of Work (sow).” Specific Types Of A‐e Services That May Be Required Under This Contract Include: facility Planning And Project Development: Services May Include Work Such As The Following: Prepare Master Plans, Project/site Plans For Proposed Facility/infrastructure Projects. Facility Planning May Be Requested For Renovation, Addition, Repair And New Construction Projects. development Of Design‐bid‐build (dbb) Packages: Services May Include Preparation Of Drawings And Specifications For Renovation, Addition, Repair Or New Construction Projects. Design Meetings With The Government May Be Required In Order To Agree On Design Solution(s) That Meet The Government’s Project Requirements. Electronic Document Delivery Details Will Be Specified At The Order Level. Electronic Delivery Shall Include Both .pdf And .dwg Formats. development Of Design‐build (db) Request For Proposal (rfp) Packages: Services May Include Working With A Construction Manager As Part Of A Design-build Team To Prepare Drawings And Specifications For Renovation, Additions, Repair Or New Construction Projects. Design Meetings With The Government May Be Required In Order To Agree On Design-build Solution(s) That Meet The Government’s Project Requirements. Electronic Document Delivery Details Will Be Specified At The Order Level. Electronic Delivery Shall Be Include Both .pdf And .dwg Formats. preparation Of Cost Estimates Using Unit Guidance, Parametric Methodologies, And Detailed Cost Estimating: Services May Include Preparing Cost Estimates To Include Rough Order Of Magnitude Through Construction Working Estimates For Renovation, Addition, Repair And/or New Construction Projects Based On Prepared Design Documents, As Called Out In The Task Order. development Of Alternatives And Economic Analysis: Service May Include Providing Alternate Design Solutions And Associated Economic Impacts For Renovation, Addition, Repair Or New Construction Projects. condition Assessment: Services May Include Performing Studies Of Existing Buildings And/or Components Of Buildings To Validate Existing Conditions That May Then Be Used To Inform Future Proposed Design Solutions. Site Visits May Be Required To Document Existing Facility/infrastructure Conditions. field Investigations (including Utility And Geotechnical): Services May Include Conducting Field Surveys/investigations Of Existing Sites, Buildings Or Specific Components Of A Building (i.e., Hvac Or Electrical Systems) In Order To Document Current Status Of A Facility’s Infrastructure. The Results Of Any Field Investigations May Then Be Used To Assist With The Preparation Of Design Documents For A Particular Project. surveying And Mapping: Services May Include Surveying And/or Mapping Of Existing Or Proposed Sites For A New Construction Project Or Building Addition. Survey Work May Be Required In Order To Document Existing Site Conditions To Support Site/civil Design Solutions. preparation Of Engineering Evaluations: Services May Include Performing Engineering Calculations To Support Civil, Mechanical, Electrical, Plumbing Or Fire Protection Design Solutions. incorporation Of Sustainable Engineering Design Practices: Services May Include Incorporation Of Design Principles For Renovation, Addition, Repair And/or New Construction Projects To Support Sustainable Design Solutions And/or Leadership In Energy And Environmental Design (leed) Certification. consultations: Services May Include Collaborating With Other Specialty Design Professionals To Offer And Propose Design Solutions Required To Respond To Unique Project Requirements. energy Computations: Services May Include Preparation Of Energy Calculations To Verify Proposed Design Solutions Comply With Required Building Codes, Federal, State And/or Local Energy Requirements. geotechnical Investigations: Services May Include Conducting Soil Boring Testing In Order To Identify Minimum Design Requirements For New Construction Projects Or Building Additions. obtaining Permits And Regulatory Approvals: Services May Include Submitting Design Documents To Local, State And/or Federal Jurisdictions For Review And Approval Prior To Proceeding With Renovation/construction Work. environmental Investigation And Consultation: Services May Include Providing Design Services Required To Meet Environmental/epa Regulations On Facility/infrastructure Projects And Providing Consultation(s)/collaboration With The Government To Discuss Acceptable Environmental Design Alternatives And Solutions. review Of Construction Contractor Submittals: Services May Include Review Of Project Submittals (such As Product Data Or Product Samples) In Order To Validate Proposed Materials/products Comply With Design Drawings And/or Specifications. field Consultation And Inspection During Construction: Services May Include Responding To Contractor Requests For Information (rfis) During Construction In Order To Address Design Questions That May Arise During Construction/renovation Projects. commissioning: Services May Include Supporting The Commissioning Process By Attending Commissioning Meetings In Order To Validate Engineered Design Solutions Are Incorporated Into The Project In Accordance With Design Specifications. operation And Maintenance Support Information (omsi): Services May Include Providing The Government With O&m Documentation And Training, Where Applicable, Based On The Final Design Solution And Construction. Electronic Document Delivery Details Shall Be Included With Each Order. Electronic Delivery Shall Include Both .pdf And .dwg Formats. as‐built Drawing Preparation: Services May Include Updating Design Documents Including Drawings And Specifications To Accurately Reflect Construction Field Changes And Document Final As-built Construction/renovation Projects. Electronic Document Delivery Details Shall Be Included With Each Order. Electronic Delivery Shall Include Both .pdf And .dwg Formats functional Analysis Concept Development (facd)/design Charrette/other Design And Construction Related Workshops And Meetings: Contractor Shall Attend Design Meetings To Collaborate With Government Representatives To Consider Design Options And Build Consensus Regarding Preferred Design Solution(s). Contractor Shall Provide Meeting Minutes (cdrl A005). document Deliverable Requirements: cdrl did Number did Title did Description/scope deliverable Schedule a001 di-misc-80508b technical Report - Study/services studies And Specifications at Milestone/ Asreq a002 di-fncl-81116 Not 2 manhour Estimate, Technical Cost Proposals manpower And Cost Estimate To Implement The Statement Of Work (sow) at Milestone a003 di-mgmt-80061a Not 2 engineering And Technical Services Accomplishment Report production Report weekly a004 di-misc-81274 Not 2 environmental Permits outlines Submittal Procedures To Be Applied To All Permits asreq a005 di-admn-81250c meeting Minutes meeting Minutes 2 Days After Meeting a006 di-mgmt-81597 personnel Resumes contractor’s Personnel Roster With Relevant Qualifications And Certifications post Award Kickoff a007 di-mgmt-80507 project Planning Chart schedule post Award Kick Off a008 di-admn-81249c meeting Agenda meeting Agenda 1 Day Before Meeting a009 di-facr-82278 installation Design Package designs And Drawings asreq other Special Considerations: as Defined By Paragraph 1‐5 Of United Facilities Criteria (ufc) 3‐ 600‐01, Fire Protection Engineering For Facilities, This Contract Requires The Services Of A Licensed Fire Protection Engineer Or Consultant. asbestos And/or Lead‐based Paint Assessments May Be Required On This Contract To Determine The Presence Of Hazardous Material During Removals/demolition Or At Utility Points Of Connections. Work On And Around Waterfront Structures, Including Under Deck And Underwater, And Work In Confined Spaces May Be Required On This Contract. A‐e Firms Must Be Able To Accept Work That Involves Asbestos, Lead Paint, Poly‐chlorinated Biphenyls (pcbs), And Other Hazardous Materials, Work On And Under Waterfront Structures, And In Confined Spaces. all Engineering And Design Services Shall Comply With The Most Current Edition Of Facilities Criteria (fc) 1‐300‐09n Design Procedures, And Other Requirements As Indicated On The Whole Building Design Guide (wbdg) Web Site (www.wbdg.org). The Selected A-e Contractor Shall Have Online Access To Web‐based Support Programs Capable Of Creating Auto-cad Documents For Government Review, And Email Via The Internet For Routine Exchange Of Correspondence. The Selected A-e Contractor Shall Submit And Maintain An A‐e Accident Prevention Plan (app) In Accordance With U.s. Army Corp Of Engineers (usace) Em 385‐1‐1 For Each Project On This Contract And Activity Hazard Analysis (aha) For Each In‐field Action. Key Personnel, Including Consultants, Must Be U.s. Citizens. a‐e Firms Are Advised That The Selected Firm, Its Subsidiaries Or Affiliates, And Its Consultants Which Design, Prepare, Or Provide Engineering Services In Support Of Construction Contract Documents Cannot Provide Construction Services For The Same Contract. This Includes Concept Design, Preparation Of Project Programming Documents (dd Form 1391), Facility Siting Studies, Environmental Assessments, Geotechnical Services, Engineering Studies And Services, Design‐build Request For Proposals (rfps), Or Other Activities That Result In Identification Of Project Scope And Cost. The Awarded Contract Will Be Subject To Specific Provisions Addressing The Avoidance Of Organizational Conflicts Of Interest, Including H-209-h003, Required Disclosure Of Organizational Conflict Of Interest (navsea) (nov 2022). The Prime Firm For This Contract Will Be Required To Perform Throughout The Contract Term. in Accordance With Far 19.702, Each Solicitation Of Offers To Perform A Contract That Is Expected To Exceed $750,000 ($1.5 Million For Construction) And That Has Subcontracting Possibilities, Shall Require The Apparently Successful Offeror To Submit An Acceptable Small Business Subcontracting Plan. If The Apparently Successful Offeror Fails To Negotiate A Subcontracting Plan Acceptable To The Contracting Officer Within The Time Limit Prescribed By The Contracting Officer, The Offeror Will Be Ineligible For Award. submission Requirements: submission Requirements - Sf 330 Part I typed, 12 Point Times New Roman, Shall Not Exceed 100 Single‐sided 8.5 By 11 Inch Pages criterion criterion Title criterion Requirements criterion 1 specialized Experience sf 330, Part I, Section F - Minimum Of Three (3) And Maximum Of Five (5) Projects Completed (project Completion To Be Defined As Receiving Final Design Acceptance From Client) Within The Past Seven (7) Years criterion 2 professional Qualifications And Technical Competence sf 330, Part I, Section E – Resumes For All Proposed Key Personnel That Illustrate Experience In The Type Of Work Proposed Under This Contract. Resumes Are Limited To Three Pages And Should Indicate: Professional Registration, Certification, Licensure And/or Accreditation In Appropriate Disciplines; Cite Recent (within The Past 10 Years) Project‐specific Experience In Work Relevant To The Services Required Under This Contract; And Indicate Proposed Role In This Contract. Indicate Participation Of Key Personnel In Example Projects In The Sf 330, Part I, Section G. criterion 3 past Performance submit A Completed Cpars/acass/ppq Evaluation For Each Project Under Criterion 1 criterion 4 quality Control describe The Quality Control Program That Will Be Utilized For All Deliverables Of This Contract And The Management Approach For Quality Control Processes And Procedures. criterion 5 program Management And Capacity 1. Provide An Organizational Chart For The Team And Discuss The Management Plan For This Contract And Personnel Roles In The Organization. Include Small Business Participation Specifics. 2. Describe The Firm’s Present Workload And The Availability Of The Project Team (including Consultants) For The Specified Contract Performance Period. 3. Describe The Firm’s Ability To Sustain The Loss Of Key Personnel While Accomplishing Work Within Required Time Limits, To Ensure Continuity Of Services And Ability To Meet Surges In Unexpected Project Demands And Ability To Adhere To Schedules And Budgets. criterion 6 knowledge Of General Geographic Area 1. Indicate Location Of The Office(s) That Will Be Performing The Work, Including Main Offices, Branch Offices, And Offices Of Team Members. 2. Provide A Narrative Describing The Team’s Knowledge And Previous Experience Of The Primary Geographic Areas To Be Covered By This Contract. 3. Provide A Narrative To Describe The Team’s Ability To Provide Timely Response To Requests For On‐site Support. criterion 7 volume Of Work firms Shall Not Submit Data For This Factor. a‐e Firms Desiring To Be Considered For This Contract Shall Submit A Completed Sf 330 Package By Dod Safe To The Contracting Officer And The Contract Specialist. The Sf 330 Shall Be Typed, 12 Point Times New Roman. Part I Shall Not Exceed 100 Single‐sided 8.5 By 11 Inch Pages (the 100 Page Limit Does Not Include The First Eight (8) Instructional Pages Of The Sf 330, Individual Subcontracting Reports (isrs), The Small Business Subcontracting Plan Or Certificates/licenses, Nor Does The Page Limit Include Cover Sheets Or Dividers, Provided That These Do Not Contain Any Substantive Information Submitted In Response To The Synopsis Or Intended To Demonstrate The Qualifications Of The Firm). Part I Pages Shall Be Numbered Sequentially. Introductions Shall Be Included In Sections E And F. A-e Firm Submissions Shall Include Its Unique Entity Identifier (uei), Commercial And Government Entity (cage), And Taxpayer Identification Number (tin) Numbers In Block 30 Of The Sf 330. submissions To This Proposal Announcement Must Be Submitted Electronically Through Dod Safe. No Paper Copies, Email, Cd-roms Or Facsimile Submissions Will Be Accepted. Electronic Proposal Submission Is Required Through The Army’s Electronic File Sharing Service, Dod Safe (https://safe.apps.mil). The Dod Safe Application Is Used To Send Large Files To Individuals That Would Normally Be Too Large To Send Via Email. There Are No User Accounts For Dod Safe. Authentication Is Handled Via Email. anyone Has Access To Dod Safe And The Application Is Available For Use By Anyone. The Dod Safe “getting Started Guide” Has Information On How To Utilize The System (https://safe.apps.mil/about.php). Instructions For Uploading Are As Follows: send An Email To The Contracting Officer And Contract Specialist To Receive The Link To Drop Off Your Proposal. This Will Need To Be Completed Five (5) Business Days Prior To The Proposal Due Date. contract Specialist, Aaron Hohl, Aaron.m.hohl.civ@us.navy.mil contracting Officer, Jared Myers, Jared.s.myers3.civ@us.navy.mil . you Will Receive An Email With The Link To Submit Your Drop Off. The Link Will Be Provided No Later Than Two (2) Business Days Prior To The Proposal Due Date. short Note To The Recipients: Click The Add Files Or Drag And Drop Your Files. For File Description, Enter N0016425r1025-firmname. click Upload Button To Send Documents. guest Users Will Need To Check Their Email To Verify Their Email Address Before The Recipients Will Be Notified. (government-issued Common Access Cards (cacs) Are Not Required). file Size Limitations: Offerors Are Advised To Follow The Dod Safe Instruction For Uploading Files. Dod Safe Supports Delivery Up To 8gb. If Needed, Offerors Are Advised To Break The Files Down To Smaller Sections In Order To Upload It To The System. In Such Cases, Please Divide The Sections As Logically As Possible And Be Sure To Clearly Name The Files As Specified Below. file Naming Convention: To Ensure Your Submission Is Received And Processed Appropriately, It Is Important That Interested Parties Carefully Ensure Their Electronic Files Adhere To The Following Naming Convention: xxx- Firmname- Volume I xxx- Firmname- Volume Ii each File Name Shall Begin With The Solicitation Number Followed By The Firm’s Name And A Brief File Description. Please See Examples Above. file Organization: Although Hard Copies Are Not Accepted, Each File Shall Be Clearly Indexed, And Logically Assembled. Font Size Shall Be 12 Or Larger. Pages Shall Be Letter Sized (larger Page Sizes (such As 11x17 Foldouts, Etc.) Will Be Counted As One Page. Proposals Shall Be In Narrative Format, Organized, And Titled So That Each Section Of The Proposal Follows The Order And Format Of The Criterion. Information Presented Should Be Organized So As To Pertain To Only The Evaluation Factor In The Section That The Information Is Presented. Information Pertaining To More Than One Evaluation Factor Should Be Repeated In Each Section For Each Factor. upload Completion And Deadline: Interested Offerors Shall Submit Proposals No Later Than The Date And Time Specified In This Synopsis. The Time And Date Of The Proposal Receipt Will Be Upload Completion/delivery Time And Date Recorded Within Dod Safe Site. Do Not Assume That Electronic Submission Will Occur Instantaneously. Large Files (e.g. 10mb Or More) Will Take Some Time To Upload. Offerors Should Time Their Upload Effort With Prudence By Not Waiting Until The Last Few Minutes- This Will Allow For Unexpected Delays In The Transmittal Process. Offerors Are Encouraged To Keep A Copy Of The Upload Confirmation For Their Record. Submissions After The Deadline Will Be Considered Late And Will Be Processed In Accordance With Far 15.208. electronic Files: Files Shall Be In Their Native Format (i.e .,.docx, .xlsx, .ppt, Etc.), Or If In .pdf Format, Shall Be In Searchable Text. Text And Graphics Portfolios Of The Electronic Copies Shall Be In A Format Readable By Microsoft Office Or Adobe Applications. Data Submitted In A Spreadsheet Format Shall Be Readable By Ms Excel (all Cells And Formulars Shall Be Unlocked). all Contractors Are Advised That Registration In System For Award Management (sam) Database Is Required Prior To Award Of A Contract. Failure To Register In The Sam Database May Render Your Firm Ineligible For Award. For More Information, Check The Sam Web Site: Https://www.sam.gov. the Technical Data Package May Contain Information That Is Export Controlled. Only Those Companies That Have Completed Dd Form 2345 And Are Certified Under The Joint Certification Program (jcp) In An Active Status Are Authorized To Receive Export Controlled Information. Only Jcp Certified Firms Will Be Eligible For Any Future Award Made Related To This Effort. Additional Information About Jcp Is Available At Https://www.dla.mil/hq/logisticsoperations/services/jcp/. offerors Shall Restrict The Disclosure Or Use Of Its Proposal, (and) A Proper Legend Must Be Included On Materials Provided. Individual Subcontractor/vendor Proprietary Information May Be Submitted Separately. In Addition, If Proposal Volumes Include Technical Requirements That Have Been Identified As Cui, The Markings Shall Apply To The Technical Information Included In The Technical Volume. offeror Shall Mark Proposal Documents As Cui In Accordance With Nist Sp 800-171. Possible Categories For Use Include But Are Not Limited To The Following: cui Category: General Proprietary Business Information https://www.archives.gov/cui/registry/category-detail/proprietary-business-info.html#authority-list banner Marking For Specified Authorities: Cui//sp-propin banner Marking For Basic Authorities: Cui category Description: material And Information Relating To, Or Associated With, A Company's Products, Business, Or Activities, Including But Not Limited To Financial Information; Data Or Statements; Trade Secrets; Product Research And Development; Existing And Future Product Designs And Performance Specifications. *at A Minimum Technical Proposals Shall Safeguard In Accordance With Markings And Distributions Statements On All Technical Documents Within The Solicitation (sow, Specification, Drawings, Etc.). cui Category: Controlled Technical Information* https://www.archives.gov/cui/registry/category-detail/controlled-technical-info.html#authority-list banner Marking: Cui//sp-cti category Description: controlled Technical Information Means Technical Information With Military Or Space Application That Is Subject To Controls On The Access, Use, Reproduction, Modification, Performance, Display, Release, Disclosure, Or Dissemination. Controlled Technical Information Is To Be Marked With One Of The Distribution Statements B Through F, In Accordance With Department Of Defense Instruction 5230.24, "distribution Statements Of Technical Documents." The Term Does Not Include Information That Is Lawfully Publicly Available Without Restrictions. "technical Information" Means Technical Data Or Computer Software, As Those Terms Are Defined In Defense Federal Acquisition Regulation Supplement Clause 252.227-7013, "rights In Technical Data - Noncommercial Items" (48 Cfr 252.227-7013). Examples Of Technical Information Include Research And Engineering Data, Engineering Drawings, And Associated Lists, Specifications, Standards, Process Sheets, Manuals, Technical Reports, Technical Orders, Catalog-item Identifications, Data Sets, Studies And Analyses And Related Information, And Computer Software Executable Code And Source Code. category Marking: cti *at A Minimum Technical Proposals Shall Safeguard In Accordance With Markings And Distributions Statements On All Technical Documents Within The Solicitation (sow, Specification, Drawings, Etc.). cui Category: General Procurement And Acquisition https://www.archives.gov/cui/registry/category-detail/procurement-acquisition.html#authority-list banner Marking: Cui//sp-procure category Description: material And Information Relating To, Or Associated With, The Acquisition And Procurement Of Goods And Services, Including But Not Limited To, Cost Or Pricing Data, Contract Information, Indirect Costs And Direct Labor Rates. category Marking: procure cui Category: Source Selection https://www.archives.gov/cui/registry/category-detail/source-selection banner Marking For Specified Authorities: Cui//sp-ssel banner Marking For Basic Authorities: Cui category Description: per Far 2.101: Any Of The Following Information That Is Prepared For Use By An Agency For The Purpose Of Evaluating A Bid Or Proposal To Enter Into An Agency Procurement Contract, If That Information Has Not Been Previously Made Available To The Public Or Disclosed Publicly: (items 1-10). category Marking: ssel each Volume Submitted Shall Be Properly Marked With At A Minimum Ssel As Follows: a Cover Page Including The “cui” Marking In The Header And Footer As Required, As Well As The Requiredcui Designator Block If The Volume Contains Cui. This Designator Block Shall Be Included At The Bottom Right Portion Of The Cover Page And Read As Follows: controlled By: Department Of The Navy controlled By: Nswc Crane Code 02 cui Category: Propin/cti/procure/ssel distribution/dissemination Control: Fedcon poc: Nswccr 0253 Branch Head all Subsequent Pages Of The Document Shall Include The “cui” Marking In The Header And Footer. If Other Information Is Included In The Header Or Footer, The "cui" Marking Shall Be Centered On Its Own Line Within The Header And Footer. in Accordance With The Federal Acquisition Regulations (far) 36.601-4(b), The A-e Firm Must Be A Professional A-e Firm Permitted By Law To Practice The Professions Of Architecture Or Engineering In The State Of Indiana. This Requirement Can Be Achieved By Providing The Firm’s Indiana Secretary Of State Registration, And Currently Employing At Least Two (2) State Of Indiana Registered A-e Professionals. A-e Firms Shall Provide Proof That The Firm Is Permitted By Law To Practice The Professions Of Architecture Or Engineering In Indiana (e.g., Indiana Secretary Of State Registration And Employee’s State Of Indiana Professional Engineering License With Stamp Or State Of Indiana Registered Architect License With Stamp). Failure To Submit The Required Proof Will Result In A Firm’s Elimination From Consideration. all Businesses Intending To Conduct Business In Indiana, Except Sole Proprietors And General Partnerships, Must Register With The Indiana Secretary Of State. If A Business Needs To Be Registered, Please Do So At Www.inbiz.in.gov. jv Offerors Must Ensure That Both Entities Are Either State Registered Individually In Accordance With The Information Above, Or State Registered As A Jv In Accordance With The Information Above. only Those Companies That Have Completed Dd Form 2345 And Are Certified Under The Joint Certification Program (jcp) In An Active Status Are Authorized To Receive Export-controlled Information. Only Jcp Certified Firms Will Be Eligible For Any Future Award Made Related To This Effort. please Provide A-e Professional Licensure Proof Within Sf 330, Part I, Section E. Please Provide Secretary Of State Registration Information Within Sf 330, Part I, Section H. please Provide Jcp Registration Specifics Within Sf 330, Part I, Section E. Include Jcp Certification Number, Jcp Status, And Jcp Expiration Date. If Currently Working To Acquire Jcp Certification, You May Provide A Brief Explanation Of Your Firm’s Progress Towards Certification. However, Only Actively Jcp Certified Firms Will Be Eligible For Award. Jcp Active Status Will Be Confirmed Via Https://www.public.dacs.dla.mil/jcp/ext/ On The Day Of Proposal Submission. firms Must Also Acknowledge All Amendments To The Solicitation Within Their Proposal. A Statement Of Amendment Acknowledgement Within Sf 330, Part I, Section H Will Suffice. Please Address Individual Amendments Along With Corresponding Date Of Issuance On Sam.gov With Your Proposal. A Signed Copy Of The Amendments Is Not Required. if An Sf 254/sf 255 Is Submitted For This Request, It Will Not Be Reviewed Or Considered. As Required Above, Provide Verifiable Evidence That Your Firm Is Permitted By Law To Practice The Professions Of Architecture Or Engineering (e.g., State Registration Number). interested Firms Shall Submit Proposals To Both The Contract Specialist And The Contracting Officer Via Dod Safe. sf 330 Submissions Are Due No Later Than 9 January 2025 At 12:00 Pm (est). Late Responses Will Be Handled In Accordance With Federal Acquisition Regulations (far) 52.215‐1. The Points Of Contact For This Acquisition Are Contract Specialist, Aaron Hohl, At Aaron.m.hohl.civ@us.navy.mil And Jared Myers, Contracting Officer, At Jared.s.myers3.civ@us.navy.mil. inquiries Concerning This Procurement Should Reference The Solicitation Number (n0016425r1025) And Title And Be Forwarded Via Email To The Points Of Contact Identified Above. Questions Pertaining To This Requirement Are Due No Later Than Fourteen (14) Days After Posting Of This Requirement In Sam.gov. list Of Attachments: statement Of Work (sow) cdrls past Performance Questionnaire (ppq) key Personnel Criteria dd 254 selection Criteria: firms Responding To This Special Notice Will Be Evaluated To Determine The Most Highly Qualified Firms To Perform The Required Services In Accordance With The Published Selection Criteria. failure To Comply With Instructions Or Provide Complete Information May Affect The Firm’s Evaluation Or Disqualify The Firm From Further Consideration. Evaluation Criteria (1) Through (4) Are Considered Most Important And Are Equal Among Themselves; Criteria (5) Through (6) Are Less Important And Are Equal Among Themselves; Criteria (7) Will Only Be Used As A Tie‐breaker Among Technically Equal Firms. Specific Selection Criteria Include: specialized Experience professional Qualifications And Technical Competence past Performance quality Control program Management And Capacity knowledge Of General Geographic Area volume Of Work (no Data Submission Required) criterion 1 —specialized Experience (sf 330, Part I, Section F): firms Will Be Evaluated On Specialized Experience In Performance Of Services Similar To Those Anticipated Under This Contract Through Evaluation Of Experience In: infrastructure/facility Design Utilizing The Following Criteria, Including, But Not Limited To, Unified Facilities Criteria (ufcs) And Military Standard (milstd); conducting On‐site Design Development Workshops, Charrettes, Functional Analysis, Schematic Design, Or Space Programming, Including Supporting Budgetary Or Parametric Cost Estimating; demonstrated Ability To Design To Project Budget And Schedule; experience Preparing Design‐bid‐build; experience Preparing Design‐build Rfp Packages; And designing Projects In Accordance With Dod, Navy, Or Other Government Agencies’ Criteria. use Of Specsintact For Package Generation And Submittal To The Government specialized Design Experience To Include Antiterrorism Force Protection (atfp), Seismic Design And Analysis, And Design Of Secure Spaces firms May Be Considered More Favorably Under Criterion 1 By Demonstrating The Following: demonstrated Experience On Military Bases Within The Primary Geographic Area Of The Contract. experience In The Delivery Of Multiple Types Of A‐e Services Identified In The Requirements Above. experience On Multiple Facility Types, Such As Business, Educational, Industrial, Assembly, Health Care, Residential, Storage, Laboratory, And Mixed-use Occupancies, Identified In The Requirements Above. demonstrated Experience Using Rsmeans-based (or Equal) Electronic Cost Estimating Software. demonstrated Experience Designing Modifications To Existing Structures And Developing Construction Phasing While Associated Facilities Are Required To Remain In Service. demonstrated Experience Specific To Navy Facility Projects, Illustrating The Capability Of The A‐e Firm And Individual Design Team Members (a‐e Staff, Key Personnel, Consultants) To Work Within The Navy Project Planning Process Including: dd Form 1391 Development In The Navy’s Electronic Procurement Generator (epg), dd Form 1391 Validation Procedures Including Cost Validation. demonstrated Understanding Of Procedures And Timely Submission Of Base Access Documents In Adherence With Security, Safety, Environmental, And Accident Prevention Regulations In Order To Support A‐e Activities And Maintain Project Schedules. experience Of A‐e Firm And Individual Design Team Members (a‐e Staff, Key Personnel, Sub‐ Consultants) With Facilities Located In Historic Areas That Will Require Consultation With State Historic Preservation Officer (shpo) Throughout The Design Process. criterion 1 Submission Requirements: provide Up To A Minimum Of Three (3) And Maximum Of Five (5) Projects Completed (project Completion To Be Defined As Receiving Final Design Acceptance From Client) Within The Past Seven (7) Years Immediately Preceding The Date Of Issuance Of This Notice That Best Demonstrate Specialized Experience Of The Proposed Team In The Areas Outlined Above. Sufficient Information To Determine The Date Of Completion Of The Project Must Be Included In The Project Description Or The Project Will Not Be Considered. If More Than The Maximum Number Of Projects Is Submitted, The Government Will Only Evaluate Projects Up To The Maximum Number Authorized In The Order Submitted. all Projects Provided In The Sf 330 Must Be Completed By The Actual Office/branch/regional Office/ Individual Team Member Proposed To Manage And Perform Work Under This Contract. Projects Not Meeting This Requirement Will Be Excluded From Consideration In The Evaluation. To Enable Verification, Firms Should Include The Uei And Cage Along With Each Firm Name In The Sf 330 Part I, Section F, Block 25, “firm Name.” Include A Contract Number Or Project Identification Number In Block 21. Include An E‐mail Address And Phone Number For The Point Of Contact In Block 23(c). In Block 24, Include In The Project Description The Contract Period Of Performance, Award Contract Value, Current Contract Value, And A Summary Of The Work Performed That Demonstrates Relevance To Specialized Experience As Outlined Above. For Projects Performed As A Sub-contractor Or A Joint Venture Involving Different Partners, Specifically Indicate The Value Of The Work Performed As A Subcontractor Or By Those Firms Proposed For This Contract, And Identify The Specific Roles And Responsibilities Performed As A Sub-contractor Or By Those Firms On The Project Rather Than The Work Performed On The Project As A Whole. If The Project Description Does Not Clearly Delineate The Work Performed By The Entity/entities Offering/teaming On This Contract, The Firm Will Be Eliminated From Award Consideration. note: If The Firm Is A Joint Venture, Projects Performed By The Joint Venture Should Be Submitted; However, If There Are No Projects Performed By The Joint Venture, Projects Must Be Submitted For Each Joint Venture Partner, Not To Exceed A Total Of Five (5) Projects For Both Partners Combined. Each Partner Within A Jv May Not Be Responsible For More Than Three (3) Projects Within The Past Performance Submission. Firms Failing To Provide Projects From All Joint Venture Partners Will Be Considered To Have Not Met The Requirements Of The Criterion. projects Shall Be Submitted On The Sf 330 At Part I, Section F And Shall Be Completed Projects. Projects Not Completed Will Be Excluded From Evaluation Consideration. For Submittal Purposes, A Task Order On An Idiq Contract Is Considered A Project, As Is A Stand‐alone Contract Award. Do Not Submit An Idiq Base Contract As An Example Project. Instead, List Relevant Task Orders Or Stand‐ Alone Contract Awards That Fit Within The Definition Above. The Government Will Not Evaluate Information Provided For An Idiq Contract. Examples Of Project Work Submitted That Do Not Conform To This Requirement Will Not Be Evaluated. all Information For Criterion 1 Shall Be Submitted In The Sf 330, Part I, Section F. The Government Will Not Consider Information Submitted In Addition To Part I, Section F In The Evaluation Of Criterion 1. criterion 2—professional Qualifications And Technical Competence (sf 330, Part I, Sections E & G): films Will Be Evaluated On Professional Qualifications, Competence, And Experience Of The Proposed Key Personnel In Providing Services To Accomplish The Tasks Required Under This Contract, Including Participation In Example Projects In The Sf 330, Part I, Section G. Key Personnel Are Individuals Who Will Have Major Contract Or Project Management Responsibilities And/or Will Provide Unusual Or Unique Expertise. Specific Disciplines That Must Be Included In Key Personnel Are: project Manager, Registered Architect Or Professional Engineer, 10 Years quality Control Specialist, Architect Or Professional Engineer, 15 Years architect, Senior, Registered Architect, 15 Years architect, Junior, Registered Architect, 10 Years civil Engineer, Senior, Registered Professional Engineer, 15 Years civil Engineer, Junior, Registered Professional Engineer, 10 Years structural Engineer, Senior, Registered Professional Engineer, 15 Years structural Engineer, Junior, Registered Professional Engineer, 10 Years mechanical Engineer, Senior, Registered Professional Engineer, 15 Years mechanical Engineer, Junior, Registered Professional Engineer, 10 Years electrical Engineer, Senior, Registered Professional Engineer, 15 Years electrical Engineer, Junior, Registered Professional Engineer, 10 Years registered Communication Distribution Design (rcdd), 15 Years fire Protection Engineer, Registered Professional Engineer, 15 Years cost Estimator, Certified Cost Professional Or Equivalent, 15 Years key Personnel, Including Consultants, Shall Be U.s. Citizens. submissions Must Demonstrate Key Personnel Relevant Experience, Formal Education (e.g. Bachelor’s Or Master’s Degrees), And Relevant Professional Development Or Professional Certifications. See Key Personnel Attachment For Specific Qualification Criteria. If An Offeror Is Unable To Meet Key Personnel Requirement List In Its Entirety, The Government Still Urges A Response For Consideration Which Illustrates The Firm’s Maximum Personnel Capabilities. If Certain Key Personnel Roles Cannot Be Fulfilled, Please Indicate Those Role Vacancies Individually With A Course Of Action For Fulfillment. criteria 2 Submission Requirements: sf 330, Part I, Section E – Provide Resumes For All Proposed Key Personnel That Illustrate Experience In The Type Of Work Proposed Under This Contract. Resumes Are Limited To Three (3) Single-sided Pages And Should Indicate: Professional Registration, Certification, Licensure And/or Accreditation In Appropriate Disciplines To Include Document/licensure Numbers; Cite Recent (within The Past 10 Years) Project‐specific Experience In Work Relevant To The Services Required Under This Contract; And Indicate Proposed Role In This Contract. Indicate Participation Of Key Personnel In Example Projects In The Sf 330, Part I, Section G. The Firm Must Hold A Current And Active License In The State Of Indiana As Well As Currently Employ At Least Two (2) State Of Indiana Registered A-e Professionals. offeror Will Not Be Permitted To Simultaneously Fulfill Multiple Roles With An Individual On The Same Project. The Individuals Identified As Key Personnel On The Sf330 May Not Have Multiple Duties Or Be “dual-hatted.” Offerors Shall Provide Individual Resumes In Sf330 Section E For Each Of The Individuals Listed Above. criterion 3—past Performance (sf 330, Part I, Section H): firms Will Be Evaluated On Past Performance With Government Agencies And Private Industry In Terms Of Work Quality, Compliance With Schedules, Cost Control, And Stakeholder/customer Satisfaction. evaluating Past Performance And Experience Will Include Information Provided In The Contract performance Assessment Reporting System (cpars) / Architect-engineer Contract Administration Support System (acass) Or A Completed Past Performance Questionnaire (ppq) For Criterion 1 Projects And May Include Customer Inquiries, Government Databases, And Other Information Available To The Government Including Contacts With Points Of Contact In Other Criteria. Failure To Provide Requested Data, Accessible Points Of Contact, Or Valid Phone Numbers Could Result In A Firm Being Considered Less Qualified. criteria 3 Submission Requirements: submit A Completed Cpars/acass/ppq Evaluation For Each Project Under Criterion 1. firms May Provide Any Information On Problems Encountered And The Corrective Actions Taken On Projects Submitted Under Criterion 1—specialized Experience. Firms May Also Address Any Adverse Past Performance Issues. Information For Each Past Performance Submission Shall Not Exceed Five Single‐sided Pages In Total. offeror Shall Submit One (1) Past Performance Questionnaire Provided As An Attachment To This Synopsis To Each Of Its Customer Pocs Identified In Criterion 1 For Referenced Projects With No Cpars/acass Available. In Order To Expedite The Assessment Process, The Offeror May Complete The “contract Information” Portion Of The Past Performance Questionnaire For The Convenience Of The Customer Poc. A Ppq Submission Is Not Required For Criterion 1 Projects Accompanied By A Cpars/acass. However, A Ppq Submission For Every Criterion 1 Project, Including Those With A Cpars/acass Evaluation On Record, Would Assist The Government In Evaluation Accuracy And Is Encouraged. the Offeror Shall Not, However, Complete Any Other Section Of The Past Performance Questionnaire. The Questionnaire Shall Be Provided To The Customer Poc With Instructions To Complete And Submit It Directly To The Contracting Officer And/or The Point Of Contact Identified In This Announcement On Or Before The Proposal Due Date. Electronic Submission Via Encrypted E-mail By The Customer Is Required. under No Circumstances Shall The Questionnaires Be Returned To The Offerors After Completion. Any Information Provided By The Offeror’s References Is Subject To Verification/validation By The Government During The Evaluation Process. The Government May Make Contact And Follow Up With The Listed References Identified On The Contractor Past Performance Data Documents/data. The Offeror May Provide Information On Problems Encountered On The Identified Contracts As Well As The Offeror’s Corrective Actions. The Government Reserves The Right To Solicit Feedback Beyond What Is Identified In The Questionnaire. awards, Letters Of Commendation, Certificates Of Appreciation, Etc., Shall Not Be Submitted And Will Not Be Considered In The Evaluation. criterion 4—quality Control Program (sf 330, Part I, Section H): firms Will Be Evaluated On The Strength Of The Quality Control Program Proposed By The Firm To Ensure Quality Products And Services Under This Contract And Means Of Ensuring Quality Services From Their Consultants/subcontractors. criteria 4 Submission Requirements: describe The Quality Control Program That Will Be Utilized For All Deliverables Of This Contract And The Management Approach For Quality Control Processes And Procedures. The Description Shall: describe Specific Quality Control Processes And Procedures Proposed For This Contract To Achieve Technical Accuracy Of And Assurance Of Overall Coordination Of Plans And Specifications, And Engineering And Design Services. provide A Quality Control Process Chart Showing The Inter‐relationship Of The Management And Team Components. identify The Key Personnel (submitted Under Criterion 2—professional Qualifications And Technical Competence) Responsible For The Quality Control Program And A Description Of Their Roles And Responsibilities. describe How The Firm’s Quality Control Program Extends To Management Of Sub-contractors. explain The Quality Control Program Including An Example Of How The Plan Has Worked For One Of The Projects Submitted As Part Of Sf 330, Section F Or How The Plan Will Work If It Has Not Been Used Previously. criterion 5—program Management And Capacity (sf 330, Part I, Section H): firms Will Be Evaluated On The Firm’s Ability To Plan For And Manage Work Under The Contract And The Capacity To Accomplish The Work In The Required Time. criteria 5 Submission Requirements: provide An Organizational Chart For The Team And Discuss The Management Plan For This Contract And Personnel Roles In The Organization. Describe The Ability Of The Firm To Manage, Coordinate And Work Effectively With Team Members, Both Internal Staff, Sub- Contractors And Consultants. Discuss The History Of Working Relationships With Team Members, Including Joint Venture Partners Where Applicable. describe The Firm’s Present Workload And The Availability Of The Project Team (including Consultants) For The Specified Contract Performance Period. Describe The Workload/availability Of The Key Personnel During The Anticipated Contract Performance Period And The Ability Of The Firm To Provide Qualified Backup Staffing For Key Personnel To Ensure Continuity Of Services. General Statements Of Availability/capacity May Be Considered Less Favorably. describe The Firm’s Ability To Sustain The Loss Of Key Personnel While Accomplishing Work Within Required Time Limits, To Ensure Continuity Of Services And Ability To Meet Surges In Unexpected Project Demands And Ability To Adhere To Schedules And Budgets. include Small Business Subcontracting Plan Specifics Which Detail Level Of Participation Of Small Business, Small Disadvantaged Business, Woman-owned Small Business, Hubzone Small Business, Service-disabled Veteran-owned Small Business And Veteran Owned Small Business Team Members. attach A Small Business Subcontracting Plan Which Estimates The Proposed Extent Of Participation Of Small Business, Small Disadvantaged Business, Woman-owned Small Business, Hubzone Small Business, Service-disabled Veteran-owned Small Business And Veteran Owned Small Business Team Members In The Contract Team. Clearly Specify Each Small Business Firm That Is A Team Member, Their Small Business Category, And Their Proposed Level Of Participation Measured As A Percentage Of The Overall Estimated Effort. The Small Business Subcontracting Plan Draft Will Not Count Against The Total Page Count Limitation For The Firm’s Response. The Small Business Subcontracting Plan Should Be Included As An Attachment To The Sf 330 Response. Small Business Subcontracting Plan Specifics May Be Referenced Within The Sf 330 Response, But The Subcontracting Plan Should Also Be Attached In Its Entirety. criterion 6— Knowledge Of General Geographic Area (sf 330, Part I, Section H) firms Will Be Evaluated On The Locations Of Their Office Or Offices That Will Be Performing The Work Under This Contract And Demonstrated Knowledge Of The General Geographic Areas In Which Projects Could Be Located. Evaluation Of Firms Will Include Consideration Of Their Location Within The General Geographic Area Of The Anticipated Projects (primarily At Naval Surface Warfare Center Crane Division, Crane, In). criteria 6 Submission Requirements: indicate Location Of The Office(s) That Will Be Performing The Work, Including Main Offices, Branch Offices, And Offices Of Team Members. provide A Narrative Describing The Team’s Knowledge And Previous Experience Of The Primary Geographic Areas To Be Covered By This Contract. provide A Narrative To Describe The Team’s Ability To Provide Timely Response To Requests For On‐site Support. Provide Timelines And Examples Of The Team’s Success In Providing This Response. Include Both Primary And Sub‐contractor Support As Required. Teams With A Demonstrated History Of Providing Timely Support May Be Considered More Favorably. criterion 7—volume Of Work (sf 330, Part 1, Section H) (tie-breaker) in The Event Of A Tie Among Equally Rated Firms, Those Firms Will Be Evaluated In Accordance With Dod Federal Acquisition Regulation Supplement (dfars) Procedures, Guidance And Information (pgi) 236.602‐1, From Data Extracted From The Federal Procurement Data System (fpds). Firms Will Be Evaluated In Terms Of Work Previously Awarded To The Firm By Dod Within The Past Twelve (12) Months With The Objective Of Effecting An Equitable Distribution Of Contracts Among Qualified A‐e Firms Including Small, Disadvantaged Business Firms, And Firms That Have Not Had Prior Dod A‐e Contracts. criterion 7 Submission Requirements: firms Shall Not Submit Data For This Factor.

Details: Description Re Quest For Price Quotation Date: 23 January 2025 Rfq No: 001-2025 Company/business Name: Address: Business/mayor’s Permit No. Tin No. Philgeps Registration No.: The Department Of Migrant Workers (dmw) Ro Xi, Through Its Bids And Awards Committee (bac), Intends To Procure The Security Service For Dmw Ro Xi For Cy 2025 Through Section 53.9 (negotiated Procurement – Small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein Addressed To: Atty. Persis Niña M. Mula-enriquez Chairperson, Bids And Awards Committee 3/f Nccc Buhangin, Km. 7 Tigatto Rd., Buhangin, Davao City Contact No. 09310298009 E-mail Address: Davao@dmw.gov.ph Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Quotation Duly Signed By Your Authorized Representative Not Later Than 28 January 2025 At 11:00 Am. The Following Documents Are Also Required To Be Submitted Along With Your Quotation On The Specified Above Or Before A Notice Of Award Is Submitted: Documents Remarks 2025 Mayor’s/business Permit In Case Not Yet Available, You May Submit Your Expired 2024 Mayor’s Or Business Permit With The Official Receipt Of The Renewal Application. However, A Copy Of Your 2025 Mayor’s Or Business Permit Shall Be Required To Be Submitted Before The Award Of The Contract. Philgeps Registration Number For Procurement Requiring A Mayor’s Permit And Philgeps Registration Number, A Certificate Of Platinum Membership May Be Submitted In Lieu Of The Said Documents. Latest Income/business Tax Return Required For Abc Above P500k. Omnibus Sworn Statement Required For Abc Above P50k. If Unable To Have The Document Notarized, You May Submit A Signed Unnotarized Omnibus Sworn Statement (in The Prescribed Template), Subject To Compliance Therewith Before The Award Of The Contract. For Any Clarification, You May Contact Us At The Telephone Number Or Email Address Provided. Valid License To Operate From Supervisory Office For Security And Investigation Agency (sosia); Valid Philippine Association Of Detective And Protective Agency Operators (padpao) Certificate; And For Any Clarification, You May Contact Us At The Telephone Number Or Email Address Provided. Instructions: Note: Failure To Follow These Instructions Will Disqualify Your Entire Quotation. 1. Do Not Alter The Contents Of This Form In Any Way. 2. The Use Of This Rfq Is Highly Encouraged To Minimize Errors Or Omissions Of The Required Mandatory Provisions. In Case Of Any Changes, Bidders Must Use Or Refer To The Latest Version Of The Rfq, Except When The Latest Version Of The Rfq Only Pertains To Deadline Extension. If Another Form Is Used Other Than The Latest Rfq, The Quotation Shall Contain All The Mandatory Requirements/provisions Including Manifestation On The Agreement With The Terms And Conditions Below. In Case A Prospective Supplier/service Provider Submits A Filled-out Rfq With A Supporting Document (i.e., A Price Quotation In A Different Format), Both Documents Shall Be Considered Unless There Will Be Discrepancies. In This Case, Provisions In The Rfq Shall Prevail. 3. All Mandatory Technical Specifications (with Asterisk) Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/ Disqualified. 4. Quotations May Be Submitted Through Electronic Mail At Davao@dmw.gov.ph. Compressed Password-protected Price Quotations, In Case Of Electronic Submission, Shall Be Sent At Davao@dmw.gov.ph With The Corresponding Password. 5. Quotations Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. For Quotations Submitted Via Electronic Mail, The Date And Time Of Receipt Indicated In The Email Shall Be Considered. 6. Do Not Leave Any Blank Items. Indicate “0” If The Item Being Offered Is For Free. Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 3. Price Quotation/s Must Be Valid For A Period Of Sixty (60) Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/ Lowest Calculated And Responsive Quotation, The Dmw Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With The Gppb Circular 06-2005. 7. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. 8. The Item/s Shall Be Delivered According To The Accepted Offer Of The Bidder. 9. Item/s Delivered Shall Be Inspected On The Scheduled Date And Time Of The Dmw. The Delivery Of The Item/s Shall Be Acknowledged Upon Delivery To Confirm Compliance With The Technical Specifications. 10. Payment Shall Be Made After Delivery And Upon The Submission Of The Required Supporting Documents, I.e., Order Slip And/or Billing Statement, By The Supplier, Contractor, Or Consultant. Our Government Servicing Bank, I.e., The Land Bank Of The Philippines, Shall Credit The Amount Due To The Identified Bank Account Of The Supplier, Contractor, Or Consultant Not Earlier Than Twenty-four (24) Hours, But Not Later Than Forty-eight (48) Hours, Upon Receipt Of Our Advice. Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. 11. Liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered, Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Dmw May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. After Having Carefully And Accepted The Instructions And Terms And Conditions, I/we Submit Our Quotation/s For The Item/s As Follows: Security Services For Dmw Ro Xi For Cy 2025 Technical Specifications Yes No Remarks Manpower Requirement 1. The Department Of Migrant Workers (dmw) Is In Need Of Security Services For Cy 2025, To Maintain Safety, Peace And Order Inside The Building And Around The Dmw’s Premises; As Well As Protect Its Officials, Employees, Visitors And Guests From Assault, Harassment, Threat And/or Intimidation And Other Criminal Acts; Guard And Protect Its Property From Theft, Arson, Pilferage, Trespass, Robbery, Destruction Or Damage And Other Unlawful Acts By Strangers Or Employees. 2. The Prospective Bidder Must Be An Active Member Of The Philippine Association Of Detective And Protective Agency Operators (padpao), Inc. For At Least Five (5) Years, With Good Standing And Duly Accredited With The Philippine-government Electronic Procurement System (phil-geps) Of The Department Of Budget And Management (dbm). 3. The Prospective Bidder Must Have Completed And/or Has An Ongoing Similar Contract. 4. The Prospective Bidder Shall Comply And Submit The Required Eligibility Requirements Per Ra 9184 And Dmw Bids And Awards Committee (bac). 5. The Security Agency Must Have A Branch Office In Davao City To Provide The Following: Location No. Of Security Guards Davao City 2 Sg (7:00 Am To 7:00 Pm) A Total Of Two (2) Qualified And Competent Uniformed, Armed, And Bonded Security Guards In Accordance With Ra 5487, Private Security Agency Law As Amended And As Well As Other Related Laws And Regulations. The Security Personnel Shall Render Service Five (5) Days A Week. Upon The Exigency Of The Service Or Need Of The Security Personnel Posted, The Guard Shall Extend Duty Hours And Shall Be Entitled To Overtime Pay. The Agency Shall Submit A Weekly Deployment Schedule Of Guards And Daily Actual Deployment Report. Subject To Approval Of The Official Where They Are Assigned. 6. For This Purpose, The Security Agency Shall Provide Dmw A Security Plan And Complete List Of The Names Of The Security Guards And Their Supervisors, Together With The Necessary Firearms And Ammunitions To The Guards Assigned To The Dmw As Well As Communications And Transportation Equipment, Health Paraphernalia Such As Face Shield And Face Mask For The Guard And Other Security Equipment Services And Shall See To It That When On Duty, They Are In Prescribed Uniform With Complete Accoutrements (see Item 12 (ii-5); Completeness Of Uniform And Paraphernalia). Likewise, Their Respective Dates Of Hiring Together With Their Respective Bio-data Duly Subscribed And Sworn To. In Case Of Any Change In The Roster Of Security Guards Including Their Supervisor Assigned To The Dmw, The Agency Shall Immediately Inform The Dmw And Shall Submit The Aforecited Data. 7. The Security Agency Shall Ensure That The Guards To Be Deployed Must Present Medical Certificate And Nbi Clearance. 8. The Supervisor Of The Security Guards Shall Initiate And Implement, With The Concurrence Of The Dmw, Other Security Measures, Aside From The Approved Security Plan, To Further Improve And Maintain Effective And Efficient Security Service For The Dmw. Any Member Of The Security Force Deployed By The Security Agency May Be Replaced Or Rotated Upon The Recommendation Of The Dmw. 9. It Is Expressly Understood And Agreed That The Security Agency Is Not An Agency Or Employee Of The Dmw And The Personnel To Be Assigned By The Security Agency To The Dmw Are In No Case Employee To The Latter As They, For All Intents And Purpose, Are Under Contract With The Security Agency. Accordingly, The Dmw Shall Not Be Responsible For Any And All Claims For Personnel Injury Or Damage, Including Death Arising Out Or, Or On The Course Of, The Lawful Performances Of The Regular And Official Function Of The Said Security Personnel. 10. The Security Agency Shall Exercise Discipline, Supervision, Control And Administration Over Its Guards In Accordance With Law, Ordinances And Permanent Governmental Rules And Regulations As Well As The Rules And Policies Prescribed By The Dmw On The Matter. Schedule Of Requirements: Post Area Of No. Of Hour Day No. Responsibility Guards Coverage 1 Dmw Regional 2 7:00 Am To Mon- Office Xi 7:00 Pm Fri Within The Duration Of The Contract The Security Service Contractor (ssc)/private Security Agency (psa) Shall Provide The Minimum Requirement Of Equipment But Not Limited To The Following: Quantity Unit Description 2 Units Side Arms 2 Units Night Sticks (batons) & Whistle 2 Units Handheld Radio With Headset 2 Pcs Spare Battery Of Handheld Radio 2 Units Handheld Metal Detector I. Scope Of Services The Security Agency Shall Provide And Deploy Sufficient Number Of Efficient, Well Trained, Experienced And Trustworthy Personnel For Security Services Daily, For The Year 2025 Per Labor Advisory No. 15, Series Of 2018 Under The Herein Schedule Of Deployments And Work Shift. The Agency Shall Provide The Supplies And Equipments As Stated In Item No. 10 - Schedule Of Requirements. Ii. Performance Criteria 1. The Security Agency Must Have Deployed At Least 10 Guards With Its Previous Contract With Other Government Agency. 2. The Security Agency Must Be Of Good Standing And Should Not Have Pending Cases With Other Agencies, Department Of Labor (dole), National Labor Relations Commission (nlrc), Other Government/private Agency And Judicial Courts. Any Pending Case By The Agency That In The Discretion Of Dmw May Be Detrimental And / Or Disadvantageous To The Administration May Be A Ground For Outright Denial And/or Disqualification By Security Agency From Further Participating In The Procurement Activity To Be Conducted By Dmw. Iii. Additional Set Of Technical Evaluation Parameters 1. Stability A) Years Of Experience – At Least 5 Years In Business B) Liquidity Of The Contractor – At Least 5 Million (current Assets Minus Stocks Minus Current Liabilities Based On Balance Sheet As Of December 31, 2022) C) Organizational Set-up – With Good Office Set-up, Personnel And Office Tools And Equipment. (submit Organizational Structure And List Of Officers) 2. Resources A) Number Of Licensed Firearms B) Number And Kind Of Communication Devices C) Number And Kind Of Motor Powered Vehicles Number And Kind Of Equipment And Supplies – With The Minimum Number And Kind Of Equipment And Supplies As Specified In Item No. 10 - Schedule Of Requirements D) Number Of Guards – With At Least 50 Security Guards 3. Security Plan General Security Protocol A) The Security Agency Shall Provide The Dmw With Twelve (12) Hour Security Service Based On The Schedule Of Requirements: Deployment Schedule. B) The Security Agency Shall Maintain A Pool Of Security Guards And Promptly Provide Relievers/replacements In Case Of Absences Of Any Of The Assigned Security Officer Or Guard In Order To Insure Continuous And Uninterrupted Security Service. The Head Of Office Shall Promptly Be Informed Of The Contingency Arrangements By The Security Agency In Cases Of Absences And/or Necessary Replacements Of Their Security Personnel Assigned To Dmw. A Security Guard Shall In No Case, Act As A Reliever After His Tour Of Duty. C) The Security Guard On Duty Shall Be Responsible For Closely Monitoring And Recording Of Movement Of All Office Materials, Supplies And Personnel Within The Assigned Area Of Responsibility. Whenever Equipment Is Brought Out Of The Building, The Security Guard On Duty Shall Demand A Gatepass Duly Signed By The Head Of The Office. D) The Security Guard On Duty Shall Be Responsible For The Proper Screening Of Visitors And Guest Observing The Proper Decorum In A Very Courteous And Polite Manner. The Security Guard Shall Require Visitors And Guests To Register In The Visitor’s Logbook, Issue A Visitor’s Pass, If Applicable, And Check For Any Firearms Or Deadly Weapons That They May Deposit For Safekeeping And Issued With The Appropriate Acknowledgement Receipt. E) The Security Guard On Duty Shall Be Duly Authorized To Inspect Bags And Packages And Search Individuals, Including Employees When Necessary. 4. Disaster Management Plan A) Fire B) Earthquake C) Flood D) Bomb Threat 5. Recruitment And Selection Criteria A) The Security Agency Shall Ensure That The Security Guards Are Properly Screened, Declared Physically And Mentally Fit And Undergone On-the-job-training Before They Are Allowed To Report To Their Assigned Posts. Security Guards Shall In No Instance Be In The Influence Of Liquor/alcohol Or Any Prohibited Drugs While On Duty. Upon The Instance When Dmw Through Its Head Of Office Found Any Security Guard To Be Under The Influence Of Liquor Or Any Prohibited Drugs, The Security Agency Shall Immediately Replace The Said Security Guard. B) All Security Guards To Be Assigned By The Security Agency To Dmw Must Possess The Following Minimum And Basic Qualifications: B.1) Filipino Citizen; B.2) 21 Years Old But Not More Than 45* Years Of Age; Preferably At Least 2nd Year College Of Sound And Alert Mind And Physically Fit For Security Duties; *more Than 45 Years Old Are Subject To Approval Of Dmw B.3) At Least 5 Feet In Height Of Medium Built; B.4) Duly Licensed And Must Have Passed The Physical And Neuro-psychiatric Examination And Drug Test Required By The Pnp And Cleared By The Pnp, Nbi And Other Concerned Government Officers; B.5) Must Be A Holder Of Certificate Of Training For Security Guards Issued By Recognized Police Agency And Such Other Requirements Under R.a. 5478, As Amended; B.6) If Those With Military Background, Must Submit Honorable Discharge Papers; And B.7) Of Good Moral Character C) The Security Agency Shall Conduct Seminars At Least Once Every Quarter To Further Train Its Security Guards On Emergency Response, Public Relations, Courtesy, Discipline, First Aid, Report Writing, Crisis Management, Proper Use And Maintenance Of Firearms, Laws On Arrest, Seizure, Searchers, Evidence, Strikes, Crime Against Persons And Property, And Other Related Topics; D) All Security Guards Shall Be Screened By The Head Of Office Before Their Acceptance. The Following Should Be Submitted For Evaluation Of The Head Of Office: D.1) Transcript Of Records Showing Compliance To Education Requirements; D.2) Medical Certificate Attested Within Two (2) Weeks Prior To Assignment To The Dmw, Showing The Physical And Mental Fitness, Height And Weight Of The Candidate; D.3) Certificate Of Live Birth Of The Candidate Showing Exact Date Of Birth On Record; D.4) Nbi Clearance D.5) Current/unexpired Security Guard License Issued By The Pnp. D.6) Certificate Of Training D.7) Recent 2x2 Picture D.8) Sss Membership D.9) Drug Test Certification D.10) Police And Barangay Clearances Showing That The Candidate Is A Citizen Of Good Moral Character In The Community. E) After Evaluation Of The Submitted Documentary Requirements And Acceptance Of Security Personnel, The Security Agency Shall Submit To The Head Of Office The Duty Detail Order Of The Accepted Security Personnel To Be Deployed To Dmw Ro Xi F) The Number Of Security Guards May Be Subsequently Increased Or Decreased As May Be Determined By Dmw Depending Upon The Circumstances; 6. Completeness Of Uniform And Paraphernalia I. The Security, Shall At All Times During The Tour Of Duty, Assign To Dmw Uniformed And Adequately Trained Security Personnel With Duly Licensed Firearms And Ammunitions With Adequate Licenses And Permits From Appropriate Government Agencies And Fully Equipped With Supplies Necessary For The Successful Implementation Of Their Duties. Ii. The Security Agency Shall Provide All Security Guards And Security Officers With Clean And Presentable Uniforms, Nametags/id, Raincoats, Batons At Its Own Cost And Other Necessary Tools Such As But Not Limited To Metal Detectors, Weapons And Ammunitions Needed. Iv. Other Duties Of Security Agency 1. The Security Agency Shall Be Under The Direct Control And Supervision Of The Dmw Head In So Far As The Security Requirements And Concerns Of The Latter. 2. The Security Agency Shall Accordingly Coordinate With Head Of Office To Conduct A Survey Of The Areas Of The Security Plan Based On Their Requirements. The Agency Shall Submit A Security Plan Based On Their Survey As Part Of Their Documentary Submissions. The Security Agency Shall Strategically Position Their Guards In Accordance With The Security Plan Save In Those Instances When There Is A Duly Authorized Special Security Arrangement With The Chief Of Office Concerned Or The Building Administration Office, As Cleared And Duly Coordinated With Administrative Unit. 3. The Security Agency Shall Immediately Replace Any Security Guard Or Officer/personnel Who May Be Found To Be Undesirable And/or Incompetent, Involve With Immoral And Illegal Activities By The Dmw Through Administrative Unit Or Head Of The Office) Upon Receipt And Verification Of Any Complaint Report Or Request. 4. The Security Agency Shall Visit The Client Or Its Representative Regularly For A Meeting At Least Twice A Month Concerning Security Operations And Other Concerns Of The Detachment; 5. The Security Guards Shall Undergo A Quarterly Drug Test At The Expense Of The Security Agency; Submit Test Results As Proof Of Compliance; If Found Positive, The Security Agency Shall Notify Dmw In Writing And Provide Replacement. 6. The Head Of The Office Jointly Or By Themselves, Shall Have The Right To Randomly Inspect The Security Guards In Their Posts To Determine Compliance On The Physical Condition Of The Security Guard On Duty, With Emphasis On Checking Whether The Guard Is Under The Influence Of Liquor And Other Intoxicating Experience Or Prohibited Substances. Reports Of Security Guards Under The Influence Of Liquor Or Other Prohibited Substances Shall Be Ground For Suspension Or Debarment Of Such Person Or If Warranted, The Pre-termination Of The Contract With Security Agency With The Dmw Without Prejudice To Any “blacklisting” Proceedings That May Be Initiated By Dmw Against The Security Agency. 7. The Security Agency Shall Be Directly Liable For The Loss, Due To Negligence Of The Assigned Security Guards Of Any Properties Of The Dmw. 8. It Is Mutually Agreed Between The Parties That The Retirement Benefits Due To The Guards Shall Exclusively Be Borne By The Security Agency Accordingly. V. Other Terms And Conditions That Will Be Included In The Contract 1. The Dmw Shall Deduct The Cost Of Maintaining The Post For The Day/shift If The Assigned Guard Is Under The Influence Of Liquor Or Prohibited Drugs Were Learned, Even If Replacement/reliever Has Been Provided; 2. Any Case Regardless Of The Nature Thereof By The Security Agency Against Dmw, Its Officers And / Or Any Of Its Personnel, That In The Discretion Of Dmw May Be Detrimental And / Or Disadvantageous To The Administration Shall Be A Ground For Outright Denial And / Or Disqualification By The Security Agency From Further Participating In The Procurement Activity To Be Conducted By Dmw. 3. The Security Agency With Pending Case Or Have Filed A Case Against Dmw Is Not Allowed To Participate In The Bidding. Vi. Payment Of Security Services Rendered 1. Payments For Services Rendered In Accordance With The Contract Shall Be Made By The Administration With The Security Agency On A Twice A Month Or Monthly Basis As The Case Maybe, Subject To The Withholding Of Any Lawful Charges And Subject Further To The Presentation By The Ssc/psa Of A Certification Of Compliance With All Existing Social And Labor Laws: The Wages (minimum Wage, 13th Month Pay, Service Incentive Leave With Pay) Have Been Paid And That All Remittances Due To The Government (retirement Benefit (ra 7641)/ Sss/ Philhealth/ Insurance Fund/ Pag-big/ Ecc Premium Contributions And Other Mandatory Benefits.) Are Made As Required Under Existing Government Auditing Rules And Regulation. The Department Reserves The Right To Inspect The Payroll Of The Security Agency In Order To Verify That The Wages Have Been Paid. Any Violation Shall Be Sufficient Ground For The Termination Of The Contract Without Prejudice To The Liability Of The Ssc/psa. 2. Claims For Payment By The Security Agency Must Be Supported By A Copy Of All Remittances Due To Sss, Pag- Ibig And Philhealth. The Security Agency Is Also Required To Submit Rf-1 (philhealth), R-3 (sss) And Hdmf Remittance Lists For Pag-ibig And Other Deductions/contributions Authorized By Law. 3. Payment Shall Be Made Within Fifteen (15) Working Days Upon Complete Submission Of The Following Documents: A) Dtrs Of All Security Guards Signed By The Duly Authorized Officer; B) Proof Of Preceding Month Remittances To Sss, Philhealth And Pag-ibig Together With The Transmittal Sheet With Stamped Received By The Said Agencies I.e. Sss, Philhealth, Pag-ibig, And Other Documents As May Be Required; And C) Invoice Of Billing Or Statement Of Account For The Period Covered. 4. All Taxes Payable To The Government Shall Be Borne By The Security Agency. 5. In Case Of Increase In Wages Rates Due To Enactment Of New Laws, The Security Agency May Seek Adjustment In Writing, Subject To The Approval Of The Authorities Concerned. 6. The Security Agency Shall Guarantee Payment To The Dmw, For Any Loss Of Or Damage To Its Property Provided That The Same Occurred Within The Jurisdiction Of The Security Agency And It Was Duly Established After Due Investigation That Said Loss Or Damaged Was The Result Principally Of The Act, Omission, Negligence Of Fault Of The Security Agency Or Its Security Personnel. Provided, Further That Such Loss, Pilferage, Or Damage On The Properties Involved Is Reported In Writing To The Security Agency Within Three (3) Working Days From The Occurrence Or Discovery Thereof. When Such Loss Or Damage Is Caused By Force Majeure Or Fortuitous Events, The Security Agency Shall Not In Any Way Be Held Responsible. In The Event The Security Agency Is Made To Pay For Such Loss Or Damage, It Shall Be Subrogated To The Rights Of The Client Against The Party Or Parties Responsible For Such Loss Or Damage. The Security Agency Performance Security Shall Be Liable For The Damages Or Losses That May Arise Directly Or Indirectly Attributable To The Negligence Or Misbehavior Or Direct Participation Of The Security Guard Assigned By The Security Agency. In Case The Bond Is Not Sufficient To Cover Such Losses Or Damages, The Security Agency Will Have To Pay The Balance Directly To The Dmw. Vii. Termination Of Contract 1. The Security Agency Shall Assume Full Responsibility For Any Claim For Any Compensation On Injuries From Accidents In Connection With Performance Of The Duties Of Security Guards And Shall Free The Dmw For Any Legal Suit In Connection Therewith. 2. Any Provision, Converts And Stipulations In The Contract Which May Be Contrary To Law, Morals, Good Customs, Public Order Or Public Policy Shall Be Void An Initio And Deemed Not To Have Been Written And In Their Instead, The General Provisions Of Law Shall Apply. 3. In Case Of Any Violations Of The Stipulations And Covenants Of The Contract, The Security Agency Agrees To Allow The Dmw To Automatically Rescind And/or Terminate The Same Without Notice To The Security Agency, And That The Dmw Shall Be Entitled For Damages Sustained. The Dmw Has The Right To Unilaterally Award Or Renegotiate The Unfinished Services/unexpired Portion Of The Contract To Another Security Agency. 4. Any And All Disputes Arising From The Implementation Of A Contract Shall Be Submitted To Arbitration In The Philippines According To The Provisions Of Republic Act No. 876, Otherwise Known As The Arbitration Law; Provided, That By Mutual Consent, The Parties May Agree In Writing To Resort To Alternative Models Of Dispute Resolution. 5. The Parties Hereunto Agree That Any Or All Actions Arising From The Contract Shall Be Filed In The City Of Davao. Viii. Assessment Or Evaluation Of The Performance Of The Service Provider/contractor 1. Before End Of The Year, Dmw Shall Conduct An Assessment Or Evaluation Of The Performance Of The Service Provider/contractor. 2. The Security Service Contractor (ssc)/private Security Agency (psa) Shall Maintain A Satisfactory Level Of Performance Throughout The Term Of The Contract Based On A Prescribed Set Of Performance Criteria. The Performance Criteria To Be Applied Shall Include, Among Others, The Following: A) Quality Of Service Delivered; B) Time Management; C) Management And Suitability Of Personnel; D) Contract Administration And Management; And E) Provision Of Regular Progress Reports. 3. Based On Its Assessment, Dmw May Pre-terminate The Contract For Failure By The Ssc/psa To Perform Its Obligations Thereon Following The Procedure Prescribed Under The Guidelines On Termination Of Contracts Issued By The Government Procurement Policy Board Under Resolution No.018-2004 Dated 22 December 2004. Ix. Contract Cost And Duration 1. The Contract Shall Be For Cy 2025, January To December 2024. However, Either Party May Terminate The Contact By Giving The Other Party Thirty (30) Days Notice In Writing Prior To Such Termination. 2. The Approved Budget Cost For The Security Service For Cy 2025 Is Five Hundred Seventy Two Thousand One Hundred Ninety Three And 36/100 Pesos Only (p572,193.36) Inclusive Of Vat. 3. The Financial Proposal Shall Contain A Breakdown Of All Costs, Including Cost Of Supplies And Equipment, Necessary For The Execution Of The Contract. 4. Retirement Benefits Shall Be Released To The Security Guard/officer Upon Retirement, Resignation, Transfer Of Service To Sister Agency Or Other Agency Or As The Security Guard/officer Is No Longer Connected To The Agency. 5. The Security Guard/officer Is Entitled To Overtime Pay Provided That Dmw Has Written Request To The Security Service Contractor (ssc)/private Security Agency (psa), Signed By The Administrator. 6. All Bid Prices For A Duration Of One (1) Year Shall Be Fixed And Shall Not Be Adjusted During Contract Implementation, Except For The Following: A. Increase In Minimum Daily Wage Pursuant To Law Or New Wage Order Issued After Date Of Bidding, Increase In Taxes; And B. If During The Term Of The Contract The Dmw Sees The Need For An Increase Or Decrease In The Number Of Security Guards, The Resulting Cost Of Said Increase Or Decrease, Provided That The Abc For The Relevant Year Is Not Exceeded. 7. The Dmw Ro Xi Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. I Hereby Certify To Comply With All The Technical Specifications Stated In The Terms Of Reference. Name Of Company/bidder Signature Over Printed Name Date Financial Offer: Security Service For Dmw Ro Xi For Cy 2025 Approved Budget For The Contract: Five Hundred Seventy Two Thousand One Hundred Ninety Three And 36/100 Pesos Only (p572,193.36) Qty Unit Description Monthly Rate (inclusive Of Vat) Total Amount For Jan-dec 2025 (inclusive Of Vat) 1 Lot Security Service For Dmw Ro Xi For Cy 2025: - 2 Guards (7:00 Am To 7:00 Pm) Total Amount In Words: Signature Over Printed Name Position/designation Office Tel./fax/mobile Nos. E-mail Address/es

Details: Corrected Postponed Due To Winter Weather Public Notice Soq #25-005 Sala Avenue Historic District Drainage Feasibility Analysis And Improvements The Parish Of Jefferson, Authorized By Resolution No 145576. Is Hereby Soliciting A Statement Of Qualifications ((tec) Professional Services Questionnaire) For Persons Or Firms Interested And Qualified To Provide Professional Engineering Services For The Sala Avenue Historic District Drainage Feasibility Analysis And Improvements Project (council District 2). Original Deadline For Submissions: 3:30 P.m., January 23, 2025 Postponed Deadline For Submissions: 3:30 P.m., February 7, 2025 General The Scope Of Work Associated With This Project Consists Of Streetscape And Drainage Improvements To The Sala Avenue Corridor Between River Road And 4th Street In The City Of Westwego. The Intention For The Project Is To Beautify And Improve The Drainage Of The Corridor For A 10-year Design Storm Utilizing Alternative Drainage Methods, Such As Green Infrastructure (bioswales, Permeable Pavement, Rain Gardens, Etc.). Jefferson Parish Anticipates The Project Will Require The Following Supplemental Services: Hydraulic Analysis, Geotechnical Services, Surveying, Landscape Architecture, And Resident Inspection. Compensation Compensation For The Required Design Services Will Be Made On An Hourly Rate Basis Or A Fixed Fee Basis, Or A Combination Of Both, Depending On Scope And Complexity Of The Work. The Parish Reserves The Right To Determine The Method Of Payment (hourly Or Fixed) For Each Individual Assignment. For Hourly Rate Work, The Firm Shall Be Compensated By The Appropriate Jefferson Parish Department On The Basis Of Their Certified And Itemized Burdened Rate In Accordance With Guidelines Established In Attachment “a” To The Standard Professional Services Agreement For Jefferson Parish. A Copy Of Attachment “a” May Be Obtained By Calling The Jefferson Parish Department Of Capital Projects At (504) 736-6833. For Fixed Fee Work, The Fee Shall Be Negotiated With The Firm By The Jefferson Parish Department Of Capital Projects And Shall Be Mutually Agreeable To Both Parties. Compensation For Supplemental Services, If Required, Shall Be In The Form Of A “lump Sum” Or Hourly Rate For Each Supplemental Service, Which Shall Be Mutually Agreeable To The Parish And The Consultant. All Costs Associated With This Project Shall Be Subject To Jefferson Parish Review And Approval. Minimum Requirements For Selection The Persons Or Firms Under Consideration Shall Have At Least One (1) Principal Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana. A Subcontractor May Not Be Used To Meet This Requirement. (section C. Of Tec Professional Services Questionnaire); The Persons Or Firms Under Consideration Shall Have A Professional In Charge Of The Project Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana With A Minimum Of Five (5) Years’ Experience. A Subcontractor May Not Be Used To Meet This Requirement. (section K. “professional In Charge Of Project:”; Of Tec Professional Services Questionnaire); The Persons Or Firms Under Consideration Shall Have One (1) Employee Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana In The Applicable Discipline Involved. A Subcontractor May Meet This Requirement Only If The Advertised Project Involves More Than One Discipline (section D. Of Tec Professional Services Questionnaire). With Regard To The Questionnaire, Principal Means The Sole Proprietor Of The Firm, Or One Who Shares An Ownership Interest With Other Persons In The Firm, Including But Not Limited To, A Partner In A Partnership, A Shareholder In A Corporation, Or A Member Of A Limited Liability Corporation. Evaluation Criteria The Following Criteria Will Be Used To Evaluate Each Firm Submitting A Statement Of Qualifications: 1) Professional Training And Experience In Relation To The Type And Magnitude Of Work Required For The Particular Project – (maximum Points Awarded Shall Be 35). 2) Size Of Firm, Considering The Number Of Professional And Support Personnel Required To Perform The Type Of Engineering Tasks, Including Project Evaluation, Project Design, Drafting Of Technical Plans, Development Of Technical Specifications And Construction Administration – (maximum Points Awarded Shall Be 10). 3) Capacity For Timely Completion Of Newly Assigned Work, Considering The Factors Of Type Of Engineering Task, Current Unfinished Workload, And Person Or Firm’s Available Professional And Support Personnel – (maximum Points Awarded Shall Be 20). 4) Past Performance On A Project In Which The Person Or Firm Assisted A Governmental Entity In Dealings With Disaster Recovery And Any Other Projects Relating To Cdbg – (respondent Should Provide A List Of Completed Disaster Recovery Projects And/or Similar Cdbg Projects For Which Firm Has Provided Verifiable References) (maximum Points Awarded Shall Be 10). 5) Location Of The Principal Office – Preference Shall Be Given To Persons Or Firms With A Principal Business Office As Follows: (a) Jefferson Parish, Including Municipalities Located Within Jefferson Parish (15 Points); (b) Neighboring Parishes Of The Greater New Orleans Metropolitan Region, Which Includes Orleans, Plaquemines, St. Bernard, St. Charles And St. Tammany Parishes (12 Points); (c) Parishes Other Than The Foregoing (10 Points); (d) Outside The State Of Louisiana (6 Points). Location Of The Principal Office Shall Only Factor Into The Evaluation Criteria If Adequate Competition (two Or More Firms That Are Responsive And Responsible) Are Located Within Jefferson Parish - (maximum Points Awarded Shall Be 15). 6) Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services, In Which The Parish Prevailed Or Any Ongoing Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services Excluding Those Instances Or Cases Where The Person Or Firm Was Added As An Indispensable Party, Or Where The Person Or Firm Participated In Or Assisted The Public Entity In Prosecution Of Its Claim. (in The Event That The Person Or Firm Fails To Provide Accurate And Detailed Information Regarding Legal Proceedings With The Parish, Including The Absence Of Legal Proceedings, The Person Or Firm Shall Be Deemed Unresponsive With Regard To This Category, And Zero (0) Points Shall Be Awarded) - (maximum Points Awarded Shall Be 15). 7) Prior Successful Completion Of Projects Of The Type And Nature Of Engineering Services, As Defined, For Which Firm Has Provided Verifiable References - (maximum Points Awarded Shall Be 5). Project Will Include Federal Disaster And Resiliency Funds And Therefore Will Include Associated Federal Requirements, Including Section 3, As Applicable. Statements Of Qualifications From Minority, Female-owned, And Local Firms / Individuals Are Invited. Each Firm’s Lowest And Highest Score Shall Be Dropped And Not Count Towards The Firm’s Score. Only Those Persons Or Firms Receiving An Overall Cumulative Score Of At Least Seventy (70) Percent Or Greater, Of The Total Possible Points For All Categories To Be Assigned By The Participating Technical Evaluation Committee Members, Shall Be Deemed Qualified To Perform These Professional Services. The Person Or Firm Submitting A Statement Of Qualification ((tec) Professional Services Questionnaire) Must Identify All Subcontractors Who Will Assist In Providing Professional Services For The Project, In The Professional Services Questionnaire. Each Subcontractor Shall Be Required To Submit A ((tec) Professional Services Questionnaire) And All Documents And Information Included In The Questionnaire. (refer To Jefferson Parish Code Ordinance, Section 2-928) All Persons Or Firms (including Subcontractors) Must Submit A Statement Of Qualifications ((tec) Professional Services Questionnaire) By The Deadline. The Latest Professional Services Questionnaire May Be Obtained By Contacting The Purchasing Department At (504) 364-2678 Or Via The Jefferson Parish Website At Https://www.jeffparish.gov/27/government. This Questionnaire Can Be Accessed By Clicking On The + Next To “doing Business In Jefferson Parish” On The Website And Clicking On “professional Services Questionnaires”. Submissions Will Only Be Accepted Electronically Via Jefferson Parish’s E-procurement Site, Central Bidding At Www.centralauctionhouse.com Or Www.jeffparishbids.net. Registration Is Required And Free For Jefferson Parish Vendors By Accessing The Following Link: Www.centralauctionhouse.com/registration.php. No Statements Will Be Accepted After The Deadline. Affidavits Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Insurances Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Disputes/protests Relating To The Decisions By The Evaluation Committee Or By The Jefferson Parish Council Shall Be Brought Before The 24th Judicial Court. Adv: The New Orleans Advocate: January 8, & 15, 2025 Corrected Postponed Due To Winter Weather: January 29, 2025

Details: N44255-25-r-1501 Full And Open Indefinite Delivery/indefinite Quantity Contract For Architect-engineer Services For Marine Waterfront Architect-engineereing (wf A-e) Services At Various Locations Within Naval Facilities Engineering Systems Command (navfac) Northwest Area Of Responsibility (aor), Primarily Washington Statedescription: All Information Needed For Interested Parties To Submit A Standard Form Sf 330, Architect Engineer Qualifications Is Contained Herein. There Is No Separate Request For Proposals (rfp) Package To Download.this Procurement Will Result In One Indefinite Delivery/indefinite Quantity (idiq) Contract For Multi-discipline Architect-engineer (a-e) Services Primarily For Marine - Waterfront Projects At Locations In The Navfac Northwest Aor Including The States Of Washington, Oregon, Idaho, Montana, Alaska, North Dakota, South Dakota, Nebraska, Minnesota, Iowa, And Wyoming. These Services Will Be Procured In Accordance With 40 Usc Chapter 11, Selection Of Architects And Engineers, As Implemented By Far Subpart 36.6. The Idiq Period Of Performance Will Be For A Base Period Of (2) Two Years And One Three (3) Year Option Period For Maximum Duration Of 60 Months. The Total Fee For The Contract Term Shall Not Exceed $249m. The Guaranteed Minimum For The Contract Term (including Option Years) Is $5,000. Firm-fixed Price Task Orders Will Be Negotiated For This Contract. There Will Be No Dollar Limit Per Task Order And No Dollar Limit Per Year.this Proposed Contract Is Being Solicited On A Full And Open Basis. The North American Industrial Classification System (naics) Code Is 541330 ? Engineering Services And The Annual Small Business Size Standard Is $22.5m. The Government Seeks The Most Highly Qualified Firm To Perform The Required Services, Based On The Demonstrated Competence And Qualifications For The Type Of Professional Services Required And At Fair And Reasonable Prices, In Accordance With The Selection Criteria. The Market Research Study (sources Sought Number: N44255-24-r-1500) Conducted By Navfac Northwest Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement On An Unrestricted Basis Inviting Full And Open Competition. The Navfac Northwest Deputy For Small Business Concurs With This Decision.the A-e Firm Is Expected To Provide An Interdisciplinary Team To Furnish Engineering And Design Services For Marine Waterfront Projects At Various Locations Predominantly Serviced By The Navfac Northwest Office. The Design And Engineering Services Will Require Expertise In Architectural, Mechanical, Electrical, Civil, Structural, Geotechnical, Corrosion Control, Coastal, Naval Architect, Fire Protection, Survey, Cost And Environmental Disciplines As It Pertains To Department Of Defense Waterfront/marine Facilities And Systems. Services May Include New Designs, Evaluations, Inspections And/or Studies For Maintenance, Construction, Equipment Installation, New Construction Repair And Replacement Of Piers, Wharves, Quay Walls, Dry Docks, Fendering Systems, Floating Metal Or Concrete Structures, Wave Attenuation Devices, Dredging, Etc., Including Utilities. The Work May Also Include Field Investigations, Technical Feasibility Assessments, Design Analysis, Structural/seismic Evaluation, Underwater Inspection, Geotechnical Evaluation, Cathodic Protection, Surveying, Cost Estimating, Technical Review Of Contract Documents Prepared By Government Employees, And Construction Support Consultation. At The Governments Discretion Up To 20% Of The Contract Value May Be Awarded For Non-waterfront Specific Designs Or Studies Including But Not Limited To New Construction Or Renovation Of Warehouses, Hangars, Administration Facilities, Barracks, Industrial Facilities, And/or Utilities.the Awarded Contract Will Be Subject To Specific Provisions Addressing The Avoidance Of Organizational Conflicts Of Interest. The Prime Firm For This Contract Will Be Required To Perform Throughout The Contract Term.interviews May Be Scheduled With Firms Slated As The Most Highly Qualified. Firms Slated For Interviews May Be Asked To Clarify Information Contained In The Sf330 Submittal. Elaborate Presentations Are Not Desired.selection Criteriafirms Responding To This Synopsis Will Be Evaluated To Determine The Most Highly Qualified Firms To Perform The Required Services In Accordance With The Published Selection Criteria. Failure To Comply With Instructions Or Provide Complete Information May Affect The Firms Evaluation Or Disqualify The Firm From Further Consideration. Criteria 1 And 2 Are Most Important And Equally Weighted. Criteria 3 Through 8 Are In Descending Order Of Importance. Specific Selection Criteria Include:1 - Specialized Experience And Sustainable Design2 - Professional Qualifications3 - Past Performance 4 - Quality Control 5 - Program Management And Capacity6 - Location7 - Commitment To Small Business8 - Volume Of Workcriterion 1 ?specialized Experience And Sustainable Design (sf330, Part I, Section F): Firms Will Be Evaluated On Specialized Experience In Performance Of Services Like Those Anticipated Under This Contract Through Evaluation Of Experience In: 1. design Of Waterfront Structures And Facilities (e.g. Piers, Wharves, Dry Docks).2. design Of Waterfront Utilities (e.g. Electrical, Compressed Air, Oily Waste)3. experience Using Department Of Defense Waterfront Unified Facilities Criteria4. experience Applying Sustainability Concepts Through An Integrated, Cost-effective Design Approach And Designing In Accordance With Recognized Sustainability Rating Systems Such As Green Globe, Leed, Etc.firms May Be Considered More Favorably By Demonstrating The Following: 1. projects Where Offeror Was The Prime Architect-engineer And Design Fees Were Above $4,000,000.submission Requirements: Provide A Maximum Of Five (5) Projects With The Design Complete Within The Past Ten (10) Years Immediately Preceding The Date Of Issuance Of This Notice That Best Demonstrate Specialized Experience Of The Proposed Team In The Areas Outlined Above. Sufficient Information To Determine The Date Of Completion Of The Project Must Be Included In The Project Description Or The Project Will Not Be Considered. If More Than The Maximum Number Of Projects Are Submitted, The Government Will Only Evaluate Projects Up To The Maximum Number Authorized In The Order Submitted.all Projects Provided In The Sf330 Must Be Completed By The Actual Office/branch/regional Office/individual Team Member Proposed To Manage And Perform Work Under This Contract. Projects Not Meeting This Requirement Will Be Excluded From Consideration In The Evaluation. To Enable Verification, Firms Should Include:1. the Unique Entity Identifier (uei) Number Along With Each Firms Name In The Sf330 Part 1, Section F, Block 25, Firm Name; 2. include A Contract Number Or Project Identification Number In Block 21;3. include An E-mail Address And Phone Number For The Point Of Contact In Block 23(c); 4. in Block 24, Include In The Project Description, The Contract Period Of Performance, Award Contract Value, Current Contract Value, And A Summary Of The Work Performed That Demonstrates Relevance To Specialized Experience As Outlined Above;5. for Projects Performed As A Subcontractor Or A Joint Venture Involving Different Partners, Specifically Indicate The Value Of The Work Performed As A Subcontractor Or By Those Firms Proposed For This Contract, And Identify The Specific Roles And Responsibilities Performed As A Subcontractor Or By Those Firms On The Project Rather Than The Work Performed On The Project As A Whole. If The Project Description Does Not Clearly Delineate The Work Performed By The Entity/entities Offering/teaming On This Contract, The Project Could Be Eliminated From Consideration.note: If The Firm Is A Joint Venture, Projects Performed By The Joint Venture Should Be Submitted; However, If There Are No Projects Performed By The Joint Venture, Projects Shall Be Submitted For Each Joint Venture Partner. Firms Failing To Provide Projects From All Joint Venture Partners Will Be Considered To Have Not Met The Requirements Of The Criterion. Projects Shall Be Submitted On The Sf-330 At Part I, Section F And Shall Be Completed Projects. Projects Not Complete Will Be Excluded From Evaluation Consideration. For Submittal Purposes, A Task Order On An Idiq Contract Is Considered A Project, As Is A Stand-alone Contract Award. Do Not Submit An Idiq Contract As An Example Project. Instead, List Relevant Task Orders Or Stand-alone Contract Awards As Individual Projects That Fit Within The Definition Above. The Government Will Not Evaluate Information Provided For An Idiq Contract. Examples Of Project Work Submitted That Do Not Conform To This Requirement Will Not Be Evaluated. All Information For Criterion 1 Should Be Submitted In The Sf330, Part I, Section F Of The Form. The Government Will Not Consider Information Submitted In Addition To Part 1, Section F In Evaluation Of Criterion 1.criterion 2 ? Professional Qualifications And Technical Competence (sf330, Part I, Sections E And G): Firms Will Be Evaluated On Professional Qualifications, Competence, And Experience Of The Proposed Key Personnel In Providing Services To Accomplish The Tasks Required Under This Contract, Including Participation In Example Projects In The Sf330, Part 1, Section G.key Personnel Are Individuals Who Will Have Major Contract Or Project Management Responsibilities And/or Will Provide Unusual Or Unique Expertise. All Key Personnel Must Be A Licensed Professional In Their Discipline And Have At Least Five (5) Years Of Demonstrated Experience On Waterfront Projects. Specific Disciplines That Shall Be Included In Key Personnel Are:� project Manager� design Quality Control Manager� senior Structural Engineer� senior Civil Engineer� senior Geotechnical Engineersubmission Requirements (sf330, Part I, Section E):provide Resumes For All Proposed Key Personnel That Illustrate Experience In The Work Proposed Under This Contract. Resumes Are Limited To 2 Pages And Should Indicate: Professional Registration, Certification, Licensure And/or Accreditation In Appropriate Disciplines; Cite Recent (within The Past Ten (10) Years) Project-specific Experience In Work Relevant To The Services Required Under This Contract; And Indicate Proposed Role In This Contract. Indicate Participation Of Key Personnel In Example Projects In The Sf330, Part 1, Section G.criterion 3 ? Past Performance (sf330, Part I, Section H):firms Will Be Evaluated On Past Performance With Government Agencies And Private Industry In Terms Of Work Quality, Compliance With Schedules, Cost Control, And Stakeholder/customer Satisfaction. Evaluating Past Performance And Experience Will Include Information Provided In Past Performance Questionnaires (ppqs) Or Cpars/acass For Criterion 1 Projects And May Include Customer Inquiries, Government Databases, And Other Information Available To The Government Including Contracts With Points Of Contact In Other Criteria. Note: Past Performance Information For Projects Listed Under Criterion 1 May Be Given Greater Weight.submission Requirements: Submit A Completed Cpars/acass Evaluation For Each Project Under Criterion 1. If A Completed Cpars/acass Evaluation Is Not Available, The Past Performance Questionnaire (ppq), Attachment (a), Included In This Notice, Is Provided For The Firm Or Its Team Members To Submit To The Client For Each Project Included Under Criterion 1, Specialized Experience. Do Not Submit A Ppq When A Completed Cpars/acass Is Available. If A Cpars/acass Evaluation Is Not Available, Completed Ppqs Should Be Submitted With Your Sf330. If The Firm Is Unable To Obtain A Completed Ppq From A Client For A Project(s) Before The Response Date Set Forth In This Notice, Firms Should Complete And Submit With Their Responses The First Page Of The Ppq, Attachment (a), Which Provides Contract And Client Information For The Respective Project(s). Firms May Submit A Ppq Previously Submitted Under A Different Notice/rfp (legible Copies Are Acceptable) If It Is On The Same Or Similar Form As Posted With This Synopsis. Firms Should Follow Up With Clients/references To Ensure Timely Submittal Of Questionnaires. If Requested By The Client, Questionnaires May Be Submitted Directly To The Governments Point Of Contact Via Email To:grace Montero: grace.e.montero.civ@us.navy.mil With A Copy Tonancy Coffee: nancy.m.coffee.civ@us.navy.mil Firms Shall Not Incorporate By Reference Into Their Response Ppqs Or Cpars Previously Submitted In Response To Other A/e Services Procurements. However, This Does Not Preclude The Government From Utilizing Previously Submitted Ppq Information In The Past Performance Evaluation. Firms Shall Provide Any Information On Problems Encountered And The Corrective Actions Taken On Projects Submitted Under Criterion 1 Specialized Experience And Sustainable Design. Firms Shall Also Address Any Adverse Past Performance Issues. Information Discussing Corrective Actions Or Adverse Past Performance Information Shall Not Exceed Two Double-sided Pages (or Four Single-sided Pages) In Total.awards, Letters Of Commendation, Certificates Of Appreciation, Etc. Shall Not Be Submitted And Will Not Be Considered In The Evaluation.criterion 4 ? Quality Control Program (sf330, Part I, Section H):firms Will Be Evaluated On The Strength Of The Quality Control Program Proposed By The Firm To Ensure Quality Products And Services Under This Contract And Means Of Ensuring Quality Services From Their Consultants/subcontractors.submission Requirements: Describe The Quality Control Program That Will Be Utilized For All Deliverables Of This Contract And The Management Approach For Quality Control Processes And Procedures. The Description Shall:1. explain The Quality Control Program Including An Example Of How The Plan Has Worked For One Of The Projects Submitted As Part Of Sf330, Section F Or How The Plan Will Work If It Has Not Been Used Previously. 2. provide A Quality Control Process Chart Showing The Inter-relationship Of The Management And Team Components.3. describe Specific Quality Control Processes And Procedures Proposed For This Contract Including Technical Accuracy Of And Assurance Of Overall Coordination Of Plans And Specifications, Field Verification Of Record Drawings And Existing Conditions Prior To Design, And Engineering And Design Services. 4. identify The Quality Control Manager And Any Other Key Personnel Responsible For The Quality Control Program And A Description Of Their Roles And Responsibilities.5. describe How The Firms Quality Control Program Extends To Management Of Subcontractors.criterion 5?program Management And Capacity (sf330, Part I, Section H): Firms Will Be Evaluated On The Firms Ability To Plan For And Manage Work Under The Contract And Demonstrated Capacity To Accomplish The Work In The Required Time. Submission Requirements: 1. provide An Organizational Chart For The Team And Discuss The Management Plan For This Contract And Personnel Roles In The Organization. 2. describe The Ability Of The Firm To Manage, Coordinate And Work Effectively With Team Members, Both Internal Staff And Consultants. Discuss The History Of Working Relationships With Team Members, Including Joint Venture Partners Where Applicable. 3. describe The Firms Present Workload And The Availability Of The Project Team (including Consultants) For The Specified Contract Performance Period. Describe The Workload/availability Of The Key Personnel During The Anticipated Contract Performance Period And The Ability Of The Firm To Provide Qualified Backup Staffing For Key Personnel To Ensure Continuity Of Services. General Statements Of Availability/capacity May Be Considered Less Favorably. Criterion 6? Location (sf330, Part I, Section H): Provide The Location Of The Office(s) That Will Be Performing The Work, Including Main Offices, Branch Offices, And Offices Of Team Members And The Locations Of Their Office(s) That Will Be Performing The Work Under This Contract With Demonstrated Knowledge Of The Primary Geographic Areas In Which Projects Could Be Located. Provide A Narrative Describing The Teams Knowledge Of The Primary Geographic Areas In Which Projects May Be Located And The Ability Of The Prime A-e To Respond To Urgent Site Visits Within 24 Hours Of Notification. The Individual(s) Responding Must Possess Authority To Negotiate And Bind The Prime Contractor. Evaluation Of Firms Will Include Consideration Of The Teams Knowledge Of The Primary Geographic Area Of The Anticipated Projects, Primarily The Navfac Northwest Aor.criterion 7?commitment To Small Business (sf330, Part I, Section H): Firms Will Be Evaluated In Terms Of The Extent To Which They Have Identified And Committed To Small Business (sb), Small Disadvantaged Business (sdb), Women-owned Small Business (wosb), Historically Underutilized Business Zone Small Business (hubzone Sb), Veteran-owned Small Business (vosb), Service Disabled Veteran Owned Small Business (sdvosb), And If Applicable, Historically Black Colleges Or Universities And Minority Institutions (hbcu/mi) In Performance Of This Contract, Whether As A Joint Venture, Teaming Arrangement, Or Subcontractor. The Government Will Evaluate Proposals Based On: (a) Past Performance In Utilization Of Small Business Concerns, And (b) Participation Of Small Business Concerns For This Requirement. In Support Of (a), All Firms Shall Provide Historical Data On Utilization Of Sb, Sdb, Wosb, Hubzone Sb, Vosb, Sdvosb And Hbcu/mi. Large Businesses Shall Submit Three Final Or Most Recent Individual Subcontracting Reports (isrs) For Similar Contracts Of Relative Size Which Show Compliance With Utilizing The Various Types Of Small Business Firms Noted Above. If Isrs Are Not Final Or Most Recent They Will Not Be Considered. If Subcontracting Goals Were Not Met, Provide An Explanation. If Individual Subcontracting Reports Were Not Applicable To The Similar Contracts Noted, Large Businesses Shall Submit Other Documentation Which Shows Their Utilization Of The Various Types Of Small Business Firms For The Contracts. Small Businesses Shall Also Submit Documentation Which Shows Their Utilization Of The Various Types Of Small Business Firms For Similar Contracts Of Relative Size. In Support Of (b), Large Businesses Shall Submit A Draft Small Business Subcontracting Plan, In Which They Will Be Evaluated On The Extent To Which They Identify And Commit To The Published Small Businesssubcontracting Program. The Secretary Of The Navy Has Assigned The Naval Facilities Engineering Command Goals For Fy2024 In Terms Of Percentages Of Total Planned Subcontracting Dollars For Utilization Of Small Businesses. Demonstrate The Plan To Meet These Goals:program fy24 Subcontracting Targetssmall Business (sb) 40%hubzone Small Business (hubzone Sb) 3%small Disadvantaged Business (sdb) 5%service-disabled Veteran-owned Small Business (sdvosb) 5%woman Owned Small Business (wosb) 5%veteran-owned Small Business (vosb) 5%if A Large Business Firm Is Selected For Award, A Small Business Subcontracting Plan, In Accordance With Far 19.7 And Dfar 219.7, Will Be Required And Incorporated Into The Contract Award. A Draft Small Business Subcontracting Plan Is Not Required From Small Businesses; However, Small Businesses Shall Submit Similar Information On The Extent To Which They Identify And Commit To Subcontracting To Large Business (lb), Sb, Sdb, Wosb, Hubzone Sb, Vosb, Sdvosb, And Hbcu/mi If Applicable In The Performance Of This Contract.the Small Business Size Standard Classification Is Naics 541330, Engineering Services, Size Standard $22.5m.the Attached Small Business Subcontracting Plan Template (attachment (b)) Shall Be Used By Large Businesses To Complete The Draft Subcontracting Plan. Firms Shall Submit Their Draft Small Business Subcontracting Plans Utilizing This Template, And Only This Template.criterion 8 ? Volume Of Work (sf330, Part 1, Section H) Firms Will Be Evaluated In Accordance With Dod Federal Acquisition Regulation Supplement (dfars) Procedures, Guidance And Information (pgi) 236.602-1, From Data Extracted From The Federal Procurement Data System (fpds). Firms Will Be Evaluated In Terms Of Work Previously Awarded To The Firm By Dod Within The Past Twelve Months With The Objective Of Effecting An Equitable Distribution Of Contracts Among Qualified A-e Firms Including Small, Disadvantaged Business Firms, And Firms That Have Not Had Prior Dod A-e Contracts.submission Requirements: Firms Do Not Submit Data For This Factor.sf330 Submission Requirements:architect-engineer Firms Desiring To Be Considered For This Contract Must Submit A Completed Sf-330 Package. The Sf-330 Shall Be Typed, One-sided, At Least 11-point Times New Roman Or Larger. Part I Shall Not Exceed 75 Single-sided 8.5 By 11 Inch Pages (the Page Limit Does Not Include Isrs, Certificates, Ppqs, Licenses, Or The Draft Subcontracting Plan, As Required By The Small Business Subcontracting Criterion, Nor Does The Page Limit Include Cover Sheets, Dividers, Or Other Requested Documentation (e.g., Joint Venture Agreement, Proof Of Ae Firm Registration) Provided That These Do Not Contain Any Substantive Information Submitted In Response To The Synopsis Or Intended To Demonstrate The Qualifications Of The Firm). Part I Pages Shall Be Numbered Sequentially. The Organizational Chart May Be One Page Single Sided 11 By 17 Foldout, Using 11-point Font Or Larger (font Limitations Do Not Apply To Graphics, Captions Or Tables). Please Include Your Unique Entity Identifier, Cage And Tin Numbers In Block 30 Of The Sf-330.in Accordance With The Far 36.601-4(b), Contracts For Architect-engineer Services May Only Be Awarded To Firms Permitted By Law To Practice The Professions Of Architecture Or Engineering. Firms Must Submit Proof That They Are Permitted By Law As Required By Far 36.601-4(b). If A Firm Is In A Jurisdiction That Requires Ae Firm Registration, The Firm Must Provide Proof Of Registration. If A Firm Is In A Jurisdiction That Does Not Require Ae Firm Registration, The Firm Must Provide Proof Eligibility To Practice (e.g., A Summary Explaining Eligibility Under The Laws Of That Jurisdiction. Failure To Submit The Required Proof Could Result In A Firms Elimination From Consideration.firms Who Are Offering As A Joint Venture Shall Include With Their Sf330 Submission A Copy Of The Joint Venture Agreement. Failure To Include The Joint Venture Agreement May Result In The Firms Elimination From Further Evaluation.interested Parties Must Be Registered In System Of Award Management (sam) At Time Of Offer Submission And Must Remain Valid Through Award. If Sam Registration Lapses During The Solicitation And Evaluation Period, The Offer Will No Longer Be Eligible For Award. For Instructions On Registering In Sam, The Sam Website At Https://www.sam.gov. *offer Submission Is Defined As The Selected Firms Submission Of Rates. If Sam Registration Is Not Complete By The Time The Government Requests Submission Rates, The Government May Proceed To The Next Slated Firm To Negotiate And Award A Contract.vets 4212 Federal Contract Reporting. The Selected Firm Must Be Current With Dol Vets 4212 Reporting Requirements If Current Awards Are $150,000 And Above. For Vets 4212 Requirements See Https://www.dol.gov/agencies/vets/programs/vets4212.the Selected Firm Must Be Determined To Be Responsible In Accordance With Far Part 9.104-1 And May Be Requested To Provide Additional Documentation In Support Of An Affirmative Determination Of Responsibility.architect-engineer Firms That Meet The Requirements Described In This Announcement Are Invited To Submit An Electronic Sf-330 To Naval Facilities Engineering Command Nw. This Is Not A Request For Proposal.if An Sf 254/sf 255 Is Submitted For This Solicitation, It Will Not Be Reviewed Or Considered. As Required Above, Provide Verifiable Evidence That Your Firm Is Permitted By Law To Practice The Professions Of Architecture Or Engineering (e.g., State Registration Number).hand-carried Or Mailed Sf-330s Will Not Be Accepted. Electronic Submissions Can Be No Larger Than 1.9 Gb Per File. Offerors Shall Ensure That The Government Has Received The Electronic Proposal Prior To The Date And Time Specified. Piee Solicitation Vendor Access Instructions Are Provided Via Enclosure 1. Emailed Submissions Will Not Be Accepted.submission Of Sf330s Will Be Via Solicitation Module Available Within Procurement Integrated Enterprise Environment (piee) At Https://wawf.eb.mil/piee-landing/. Instructions For Obtaining Access To And Using The Solicitation Module Will Be Provided In The A-e Synopsis.inquiries Concerning This Procurement Should Include Solicitation Number And Title And Be Forwarded Via Email: Grace Montero: grace.e.montero.civ@us.navy.mil With A Copy Tonancy Coffee: nancy.m.coffee.civ@us.navy.mil Submission Deadline Statements Of Qualifications Are Due No Later Than: 12:00 P.m. Pacific Standard Time (pst) On Monday, January 27, 2025.late Responses Will Be Handled In Accordance With Far 52.215-1 Instructions To Offerors-competitive Acquisition.this Is Not A Request For Proposal.

Details: Creation of a concept for the provision of needs-based housing for people in need of care and their relatives in the city of Frankfurt (or) As part of the Care Pact and the Local Care Funding Program of the State of Brandenburg, a report on the provision of needs-based housing for people in need of care and their relatives in the city of Frankfurt (or) is to be prepared by June 30, 2025. The basis is a well-founded assessment of the current situation and future trends to be expected in the city of Frankfurt (or) with regard to the housing situation of people in need of care and senior citizens. It should be noted that extensive data is already available in the form of the population forecast, a senior citizen survey, care structure planning and the plan for senior citizens. Particular attention should be paid to - the housing wishes of senior citizens, - generational change, - the different developments in the districts and the city center, - information on age-appropriate housing stock and - the affordability of housing. Building on this, goals and strategies for age-appropriate housing provision in Frankfurt (Oder) are to be developed.

Details: Amendment 0003 (01/01/2025): Solicitation Q&asee Attachment "solicitation Q&a" For All Responses To Inquiries Submitted By The Due Date/time.end Of Amendment 0003.amendment 0002 (12/19/2024): Solicitation Extendedthe Solicitation Due Date And Time Is Hereby Extended To Friday, January 17, 2024 At 12:00pm Mst/mdt Due To Limited Availability For Site Visits During The End Of The Calendar Year.end Of Amendment 0002amendment 0001 (12/19/2024): Incumbent Informationthe Incumbent Contract Was Awarded To Superior Janitorial Group Llc For An Aggregate Of $70,620.00.end Of Amendment 0001combined Synopsis/solicitationnon-personal Janitorial Services For National Weather Service (nws), Weather Forecast Office (wfo) Located In Tallahassee, Fl(i) this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice And In Accordance With The Simplified Acquisition Procedures Authorized In Far Part 13. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued.(ii) this Solicitation Is Issued As A Request For Quotation (rfq). Submit Written Quotes On Rfq Number 1305m325q0035.(iii) the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2025-01 (nov 2024).(iv) this Solicitation Is Being Issued As A Total Small Business Set-aside. The Associated Naics Code Is 561720. The Small Business Size Standard Is $22.0 Million. (v) this Combined Solicitation/synopsis Is For Purchase Of The Following Commercial Services:clin 0001 – Base Yearservices, Non-personal, To Provide All Labor, Equipment And Materials (unless Otherwise Provided Herein) Necessary For Janitorial Services At The National Weather Service (nws), Weather Forecast Office (wfo) In Tallahassee, Fl, In Accordance With The Statement Of Work. Period Of Performance 03/01/2025 Through 02/28/2026.quantity: 12 Months unit Price (per Month): ___________ annual Total: ______________clin 1001 – Option Year 1services, Non-personal, To Provide All Labor, Equipment And Materials (unless Otherwise Provided Herein) Necessary For Janitorial Services At The National Weather Service (nws), Weather Forecast Office (wfo) In Tallahassee, Fl, In Accordance With The Statement Of Work. Period Of Performance 03/01/2026 Through 02/28/2027.quantity: 12 Months unit Price (per Month): ___________ annual Total: ______________clin 2001 – Option Year 2services, Non-personal, To Provide All Labor, Equipment And Materials (unless Otherwise Provided Herein) Necessary For Janitorial Services At The National Weather Service (nws), Weather Forecast Office (wfo) In Tallahassee, Fl, In Accordance With The Statement Of Work. Period Of Performance 03/01/2027 Through 02/29/2028.quantity: 12 Months unit Price (per Month): ___________ annual Total: ______________clin 3001 – Option Year 3services, Non-personal, To Provide All Labor, Equipment And Materials (unless Otherwise Provided Herein) Necessary For Janitorial Services At The National Weather Service (nws), Weather Forecast Office (wfo) In Tallahassee, Fl, In Accordance With The Statement Of Work. Period Of Performance 03/01/2028 Through 02/28/2029.quantity: 12 Months unit Price (per Month): ___________ annual Total: ______________clin 4001 – Option Year 4services, Non-personal, To Provide All Labor, Equipment And Materials (unless Otherwise Provided Herein) Necessary For Janitorial Services At The National Weather Service (nws), Weather Forecast Office (wfo) In Tallahassee, Fl, In Accordance With The Statement Of Work. Period Of Performance 03/01/2029 Through 02/28/2030.quantity: 12 Months unit Price (per Month): ___________ annual Total: ______________aggregate Total For All Years: ________________________(vi) description Of Requirements Is As Follows:see Attached Statement Of Work Which Applies To Base Year And All Option Years 1 – 4, And Department Of Labor Wage Rates: Wd 2015-4569, Revision No. 24, Dated 07/22/2024, Which Can Be Found On: Https://sam.gov/content/wage-determinationsinvoices To Be Billed Monthly In Arrears. Provide Monthly And Annual Pricing For Each Base And Option Year. Quote Pricing May Be Provided On Attached Sf18 Form Or On Company Letterhead.(vii) date(s) And Place(s) Of Delivery And Acceptance:period Of Performance Shall Be:base Year For A Twelve Month Period 03/01/2025 Through 02/28/2026.option Period 1 For A Twelve Month Period 03/01/2026 Through 02/28/2027.option Period 2 For A Twelve Month Period 03/01/2027 Through 02/29/2028. Option Period 3 For A Twelve Month Period 03/01/2028 Through 02/28/2029. Option Period 4 For A Twelve Month Period 03/01/2029 Through 02/28/2030. Place Of Performance Is 1017 Academic Way, Tallahassee, Fl 32306.(viii) Far Provision 52.212-1, Instructions To Offerors-commercial Products And Commercial Services (sept 2023), Applies To This Acquisition And Can Be Found On The Request For Quote Form Sf18 Attachment.(ix) Far Provision 52.212-2, Evaluation-commercial Products And Commercial Services (nov 2021), Applies To This Acquisition And Can Be Found On The Request For Quote Form Sf18 Attachment.(x) Far Provision 52.212-3, Offeror Representations And Certifications-commercial Products And Commercial Services (may 2024), Applies To This Acquisition And Can Be Found On The Request For Quote Form Sf18 Attachment. Offerors Are Advised To Include A Completed Copy Of The Provision With Its Offer.(xi) Far Clause At 52.212-4, Contract Terms And Conditions-commercial Products And Commercial Services (nov 2023), Applies To This Acquisition And Can Be Found On The Request For Quote Form Sf18 Attachment. (xii) Far Clause At 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders-commercial Products And Commercial Services (nov 2024), Applies To This Acquisition And Can Be Found In Full Text On The Request For Quote Form Sf18 Attachment. (xiii) Any Additional Contract Requirement(s) Or Terms And Conditions That Apply Can Be Found On The Request For Quote Form Sf18 Attachment. (xiv) Defense Priorities And Allocations System (dpas) And Assigned Rating Does Not Apply.(xv) Quotes Are Required To Be Received In The Contracting Office No Later Than 12:00pm Mst/mdt On Friday, January 3, 2025. All Quotes Must Be Submitted Electronically Via Email To Stephanie.mas@noaa.gov.(xvi) Any Questions Regarding This Solicitation Should Be Submitted Electronically Via Email To Stephanie.mas@noaa.gov.utilization Of Fedconnect® For Contract Administrationthe Department Of Commerce Will Utilize The Fedconnect® Web Portal In Administering This Award. The Contractor Must Be Registered In Fedconnect® And Have Access To The Fedconnect® Website Located At Https://www.fedconnect.net/fedconnect/. For Assistance In Registering Or For Other Fedconnect® Questions Please Call The Fedconnect® Help Desk At (800) 899-6665 Or Email At Support@fedconnect.net. There Is No Charge For Registration In Or Use Of Fedconnect®.(end)1352.215-72 Inquiries (apr 2010)offerors Must Submit All Questions Concerning This Solicitation In Writing Via Email To Stephanie.mas@noaa.gov. Questions Should Be Received No Later Than 12:00pm Mst/mdt On Friday, December 27, 2024. Any Responses To Questions Will Be Made In Writing, Without Identification Of The Questioner, And Will Be Included In An Amendment To The Solicitation. Even If Provided In Other Form, Only The Question Responses Included In The Amendment To The Solicitation Will Govern Performance Of The Contract.(end Of Clause)52.237-1 Site Visit (apr 1984)offerors Or Quoters Are Urged And Expected To Inspect The Site Where Services Are To Be Performed And To Satisfy Themselves Regarding All General And Local Conditions That May Affect The Cost Of Contract Performance, To The Extent That The Information Is Reasonably Obtainable. In No Event Shall Failure To Inspect The Site Constitute Grounds For A Claim After Contract Award.(end Of Provision)a Site Visit Is Highly Recommended But Not Required. Offerors Are Urged And Expected To Inspect The Site Where Services Are To Be Performed And To Satisfy Themselves Regarding All General And Local Conditions That May Affect The Cost Of Contract Performance, To The Extent That The Information Is Reasonably Obtainable. In No Event Shall Failure To Inspect The Site Constitute Grounds For A Claim After Contract Award. Please Contact Jennifer Nichols At 850-942-8833 Ext. 222 Or Jennifer.nichols@noaa.gov To Set Up A Time To Visit The Site. All Questions During The Site Visit Should Be Submitted Electronically To Stephanie.mas@noaa.gov.far 52.212-1 Instructions To Offerors-commercial Products And Commercial Services (sep 2023)notice To Offerors: Instructions For Submitting Quotations Under This Request For Quote Must Be Followed. Failure To Provide All Information To Aid In The Evaluation May Be Considered Non-responsive. Offers That Are Non-responsive May Be Excluded From Further Evaluation And Rejected Without Further Notification To The Offeror.1. Submit Pdf Or Microsoft Word Format Quotations To The Office Specified In This Solicitation At Or Before The Time Specified In The Solicitation. Quote Documents Shall Include Signed Copies Of The Sf 18 And Sf 30(s) To Acknowledge The Solicitation And Any Applicable Amendments. Email Quotes Are Required And Can Be Sent To Stephanie.mas@noaa.gov. 2. Offeror Shall Have An Active Registration In The System For Award Management (sam Found At Https://sam.gov/content/home) In Order To Provide A Quote And Be Eligible For Award. Must Provide Their Ueid/cage Code With Their Quote. 3. Offerors Shall Assume That The Government Has No Prior Knowledge Of Them Or Their Capability.4. Offerors Must Provide All Evaluation Criteria In Accordance With Far 52.212-2. Offerors Who Do Not Provide All Evaluation Criteria May Not Be Considered.1. technical Approach And Capability2. past Performance, Including Submission Of Completed Past Performance Questionnaires3. pricethe Government Does Not Accept Responsibility For Non-receipt Of Quotes. It Is The Contractor’s Responsibility To Request And Receive A Confirmation Of The Quote Receipt.far 52.212-2 Evaluation- Commercial Products And Commercial Services (nov 2021) Offers Will Be Evaluated Based On Price And The Factors Set Forth In Paragraph (a). The Evaluation Will Consider The Non-price Technical Solution (technical Approach And Past Performance) To Be Significantly More Important Than Price. However, As Quotes Are Determined To Be More Equal In The Non-price Evaluation Factor, Price Becomes More Important And May Become The Determining Factor For Award. If, At Any Stage Of The Evaluation, All Vendors Are Determined To Have Submitted Equal, Or Virtually Equal, Non-price Technical Solutions, Price Could Become The Factor In Determining Which Vendor Will Receive The Award.the Government Intends To Evaluate The Quotes And Award A Purchase Order Based On The Offeror’s Initial Quote; Therefore, The Offeror’s Initial Quote Should Contain The Offeror’s Best Terms From A Non-price Technical Solution And Price Standpoint. The Government Reserves The Right Not To Award A Purchase Order Depending On The Quality Of The Quote(s) Submitted And The Availability Of Funds. Furthermore, The Government May Waive Informalities And Minor Irregularities Or Omissions In Quotes Received.the Government May Make Award To Other Than The Lowest-priced Offeror Or The Offeror With The Highest Technical Rating If The Contracting Officer Determines That To Do So Would Result In The Best Value To The Government. The Government Will Not Make An Award At A Significantly Higher Overall Price To Achieve Only Slightly Superior Performance Capability. (a) The Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. Paragraph (a) Is Hereby Completed As Follows: Evaluation Will Be Based On The Following: 1. technical Approach And Capability. The Offeror’s Overall Technical Approach Will Be Evaluated To Assess The Government's Level Of Confidence In The Offeror’s Understanding Of, Approach To, And Ability To Successfully Perform The Requirements As Described In The Statement Of Work. Provide A Detailed Description Of The Company’s Experience Performing Similar Services. A Detailed Technical Approach Write-up Describing How The Offeror Will Perform This Service Is Required To Be Submitted With The Quote Regardless Of Whether A Site Visit Was Made Or Not. The Technical Approach Write-up Must Not Be A Reiteration Of The Statement Of Work, But How Your Company Plans On Performing The Tasks Listed In The Attached Statement Of Work. (i.e. Performance Checklists, Anticipated Number Of Employees, Anticipated Hours At The Facility And/or Confirmation Of Supplies Being Provided, Etc.)2. past Performance. Quote Shall Include At Least Two References From At Least Two Separate Contracts For Similar And Relevant Services Including The Name, Phone Number, Full Address, And E-mail Address Of The Reference To Demonstrate The Offeror’s Capability To Successfully Perform The Services Listed In The Statement Of Work. The Offeror Is Required To Fill Out Blocks 1-4 And Send The Attached Past Performance Questionnaire To Those References Provided By The Offeror In Their Submission, And Email The Completed Survey Form Directly To Stephanie.mas@noaa.gov By The Closing Date And Time Of This Solicitation. The Government Reserves The Right To Consider Past Performance Report Forms Received After The Due Date And Time Of The Solicitation And To Contact References For Verification Or Additional Information.the Offeror's Past Performance On Related Contracts Will Be Evaluated To Determine, As Appropriate, Successful Performance Of Contract Requirements, Quality And Timeliness Of Delivery Of Goods And Services, Cost Management, Communications Between Contracting Parties, Proactive Management And Customer Satisfaction. The Government Will Use Its Discretion To Determine The Sources Of Past Performance Information Used In The Evaluation, And The Information May Be Obtained From References Provided By The Offeror, The Agency’s Knowledge Of Offeror Performance, Other Government Agencies Or Commercial Entities, Or Past Performance Databases, And Will Be Based On Responsiveness, Quality, And Customer Services. Offerors Lacking Relevant Past Performance History, Or For Whom Past Performance Information Is Either Not Available Or Has Not Been Submitted To The Government, Will Receive A Neutral Rating For Past Performance.3. price. The Government Will Evaluate The Price Quote For Completeness And Reasonableness In Relation To The Rfq Requirements. Quoted Prices Must Be Entirely Compatible With The Non-price Technical Solution.the Government Intends To Award A Trade-off, Single Firm Fixed-price Purchase Order On An All Or None Basis With Payment Terms Of Net 30. (b) Options. The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s).(c) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer’s Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award.(end Of Provision)

Details: Advanced Procurement Notice Future Fighter Capabilities Project (ffcp) Cfb Cold Lake, Ab (with Security Requirements) Purpose Of This Advanced Procurement Notice This Is Not A Bid Solicitation. This Is An Advanced Procurement Notice (apn) Of Potential Contracts With Anticipated Security Requirements To Provide Interested Contractors, Suppliers, And Vendors An Opportunity To Begin The Sponsorship Request Process For Potentially Obtaining The Required Security Clearance(s) That Are Anticipated. Note That There Is No Guarantee That These Contracts Will Proceed Or That Any Security Clearance(s) Will Be Granted Under The Sponsorship Process In A Timely Fashion Or Otherwise. Description Of The Project Ellisdon Construction Services Inc. (ellisdon) As The Design Builder, Along With Its Design Partner, Stantec Have Been Contracted To Provide Design Services And Constructability Oversight To Complete The Design Of The Royal Canadian Air Force (rcaf) Infrastructure That Will Support The Future Fighter Capability Project (ffcp). The Infrastructure Will Provide Shelter And A Working Environment Capable Of Supporting The Operation And Maintenance Of A Yet To Be Determined Advanced Fighter Aircraft. Design Has Progressed Significantly With Various Tender Packages Forthcoming Tentatively To Start In Q3 2024, With Project Construction Being Conditional On The Project Receiving Approval To Proceed From Dnd. details On Upcoming Projected Tender Packages To Follow Via Amendment. Prior To This, Ellisdon Is Seeking Interested Parties Consisting Of Trade Contractors, Vendors, And Suppliers To Ensure That They Have All Necessary Security Clearances In Place Prior To This As This Is A Requirement For This Project.    Description Of The Scope Of Works Project Construction Is Conditional On The Project Receiving Approval To Proceed From Dnd. Project Scope And Summary Are Noted Below. Contract Number:  71947 Title:  Modified Design Build Services For Fighter Squadron Facility Building Size: Approximately 555,000 Sf Anticipated Posting Date: q3 2024 Description: construction Of A New A Fighter Squadron Facility Consisting Of Two Fully Operational tactical Fighter Squadrons (tfs) And The Operational Training Unit (otu),  including But Not Limited to: Offices, Administrative Spaces, Mission Planning Rooms, Briefing / De-briefing Rooms, Meeting rooms, Classrooms, Auditorium, Speciality Training Rooms Including Simulators (sims) accommodations And Part-task Trainers Accommodations, Hangars, Maintenance Bay Facilities, specialty Aircraft Maintenance Labs, Shops And Storage, It Offices And Server Rooms, Building support Spaces, And Common Spaces. This Work Package Will Also Include The Construction Of Nearby Airfield Pavements, Apron And Taxiway Access Lane Edge Lighting, And Apron Flood Lighting consisting Of Concrete And Asphalt. Construction Of Infrastructure Will Encompass The Following Scopes Of Work. Scope Of Work, Using Masterformat Divisional Breakdown As A Reference, May Include, But Are Not Limited To: Masterformat Division             Scope Of Work 01 45 00                                 Surveying 01 45 00                                 Material Testing 01 45 00                                  Third Party Inspection (roof, Structural, Geotechnical) 01 52 00                                  Temporary Facilities (trailers, Toilets, Fencing, Waste Bins) 01 54 19                                  Tower Cranes 01 54 23                                  Scaffolding 02 41 19                                  Selective Demolition 03 11 00                                  Concrete Formwork 03 15 00                                  Concrete Accessories 03 20 00                                  Reinforcing Steel 03 30 00                                  Concrete Supply 03 35 00                                  Concrete Placing & Finishing 03 45 00                                  Precast Specialties 04 00 00                                  Masonry 05 10 00                                  Structural Steel 05 30 00                                  Metal Decking 05 50 00                                  Miscellaneous Steel 05 70 00                                  Ornamental (specialized) Metals 06 20 00                                  Millwork / Architectural Woodwork 07 10 00                                  Damp Proofing & Waterproofing 07 40 00                                  Metal Roofing, Cladding & Siding 07 50 00                                  Membrane Roofing 07 80 00                                  Firestopping & Fireproofing 07 90 00                                  Caulking 08 10 00                                  Openings – Doors, Frames & Hardware 08 33 00                                  Coiling Doors & Grilles 08 34 16                                  Hanger Doors 08 35 00                                  Folding Doors & Grilles 08 36 00                                  Overhead Doors 08 40 00                                  Aluminum Entrances, Storefronts & Curtain Wall 08 80 00                                  Glazing 08 87 00                                  Window Film 09 21 16                                  Gypsum Board Assemblies 09 51 14                                  Acoustic Panels 09 60 00                                  Flooring 09 66 00                                  Tiling 09 67 00                                  Fluid Applied Flooring 09 69 00                                  Access Flooring 09 90 00                                  Painting 10 11 00                                  Visual Display Boards 10 14 00                                  Signage 10 22 19                                  Demountable Partitions 10 26 00                                  Wall, Corner, Door Protection 10 28 00                                  Bathroom Accessories & Toilet Partitions 10 51 00                                  Lockers 10 75 00                                  Flagpoles 11 30 00                                  Appliances 11 61 00                                  Theater And Stage Equipment 11 66 00                                  Athletic Equipment 11 81 29                                  Fall Arrest Systems 11 98 00                                  Detention Equipment 12 00 00                                  Furnishings 12 20 00                                  Window Coverings 14 20 00                                  Elevator & Lifts 21 00 00                                  Fire Suppression 22 00 00                                  Mechanical – Plumbing 23 00 00                                  Mechanical – Heating, Ventilation And Air Conditioning (hvac) 25 00 00                                  Integrated Automation 26 00 00                                  Electrical 28 10 00                                  Access Control            31 00 00                                  Earthworks 31 60 00                                  Piling 32 10 00                                  Paving 32 16 00                                  Sidewalk Curb & Gutter 32 31 00                                  Fencing 32 90 00                                  Landscaping 33 00 00                                  Utilities & Underground 34 73 00                                  Airfield Construction - Apron 41 22 00                                  Overhead Cranes 48 16 00                                  Geothermal Energy Project Prequalification And Anticipated Security Requirements In Order To Be Eligible To Participate In The Upcoming Project Prequalification Process, The Interested Party Will Be Required To, Among Other Things, Actively Hold All Required Security Clearance(s) At The Time Of Closing. this Will Also Be Noted in All Upcoming Solicitation Tender Documents. As Of The Date Of Posting Of This Advance Procurement Notice, The Required Security Clearance(s) Are Anticipated To Be: * for Areas Established As Security And High Security Zones - A Valid And Active Facility Security Clearance (fsc) At The Level Of Secret Granted Or Approved By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc)   * For Areas Established As Public, Reception And Operations Zones - A Valid And Active Designated Organization Screening (dos) At The Level Of Reliability Granted Or Approved By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc) Industrial Security Program (isp) Sponsorship Defence Construction Canada (dcc) Is Providing Interested Parties Early Access To The Security Clearance Application Process Through Sponsorship Under Its Industrial Security Program (isp). Accordingly, Interested Parties That Are Interested In Submitting Or Participating In A Proposal/bid For These Procurements That Fall Under This Program And That Do Not Actively Hold The Above Identified Security Clearance(s) Should Begin The Security Clearance Application Process By Applying Through Dcc’s Isp. To Begin The Security Clearance Sponsorship Process, Please Submit A Sponsorship Request Application To Dcc By Following The Steps Identified On Dcc’s Website At: Https://www.dcc-cdc.gc.ca/industry/security-requirements In Their Sponsorship Request Application To Dcc, Interested Parties Are Asked To Quote The Following Information, Among Other Things: * Contract Number As Referenced Above; And * Level Of Clearance Requested To Be Sponsored For. Sponsorship Process Timeline Sponsorship Timeline Is Currently As Follows: * Thirty (30) Calendar Days Prior To Planned Tender Closing, For Designated Organization Screening (dos); And * Sixty (60) Calendar Days Prior To Planned Solicitation/tender Closing, For Facility Security Clearance (fsc) At The Level Of Secret. Questions Any Questions Pertaining To The Isp Sponsorship Process Outlined In This Advanced Procurement Notice Can Be Addressed To: Telephone: (613) 998-8974 Email Address: Isp.sponsorship@dcc-cdc.gc.ca Any Questions, Exclusive Of Security Sponsorship, Relating To This Advanced Procurement Notice Can Be Addressed To: Scott Barabash, Cet, Gsc, Cec Senior Estimator Ellisdon Construction Services Inc. 780-444-3042 Sbarabash@ellisdon.com Disclaimer Dcc Nor Ellisdon Do Not Provide Any Assurances Or Guarantees That A Sponsorship Request Package Or A Security Clearance Application Forwarded To The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc) On Behalf Of A Interested Party Will Be Successful Or Result In The Granting Of The Requested Security Clearance(s) By The Csp, Pwgsc, In A Timely Fashion. At All Times, The Processing Of A Sponsorship Request Package Or A Securiy Clearance Application Is Subject To The Respective Terms, Conditions, And Timelines Of Dcc's Isp Sponsorship Process And The Csp, Pwgsc's Security Clearance Granting Process. By Applying To Either Of The Aforementioned Processess, The Interested Party Accepts And Agrees To Bear Any Risks Associated With: (i) The Completeness Or Accuracy, Or Lack Thereof, Of Its Application Or Related Documents Submitted Under Or In Connection With Either Said Processes, And (ii) The Timeliness, Or Lack Thereof, Of Any Processing Or Granting Of Security Clearance(s) Under Or In Connection With Either Said Processes.