Survey Tenders

Details: Page 3 Of 3 sources Sought Synopsis the Department Of Veterans Affairs Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Firms Having An Interest In And The Resources To Support A Requirement For The Vyntus Cpx/flex Plan Service Contract At The Jesse Brown Va Medical Center (jbvamc. The Result Of This Market Research May Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 811210 Electronic And Precision Equipment Repair And Maintenance. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. tentative Requirements: statement Of Work vyntus Cpx/flex Plan Service Contract 1. Description Of Services the Contractor Shall Provide All Labor, Material, Tools, Travel, Management, And Equipment Necessary To Provide Services Such As Upgrades, Repair, Preventative Maintenance And/or Replacement Equipment For The Pulmonary Function Testing And The Cardiopulmonary Exercise Test Equipment At The Jesse Brown Va Medical Center (jesse Brown Vamc) Located At 820 S. Damen Avenue, Chicago, Illinois 60612. This Is A Base Plus Three (3) Option Year(s) Contract. 2. Background the Jesse Brown Va Medical Center In The Pulmonary Function Lab Is Requesting A Service Contract For Existing Equipment That Was Purchased In September 2016. The Contractor Shall Provide For The Continuum Of Services Such As Upgrades, Repair, Preventative Maintenance And/or Replacement Of The Diagnostic Equipment In The Event Of Malfunction Or Destroyed Parts From The Normal Wear And Tear Of Use. Due To The Highly Specialized And Technical Equipment Requiring Specialized Training And Non-substitutable Parts Required For The Existing Equipment, Only Those Vendors That Specialize With The Software And Hardware Of Jaeger Masterscreen, Sentrysuite And Vyntus Equipment Shall Be Acceptable For Coverage Of This Equipment. 3. Objectives this Service Contract Shall Be Utilized For Performing Preventative Maintenance And Repair Or Replacement Of Malfunctioning Equipment Or Parts. The Services And Personnel Shall Be Provided By The Contractor Who Have Specifically Trained Field Support Representatives And In Coordination, When Needed, By Technical Support Specialists For All Repair, Updates, And Upgrades Of Jaeger Master Screen, Sentry Suite And Vyntus Equipment. The Parts Required For The Repair Of This Equipment Are Specifically Designed And Are Not Substitutable. The Trained Field Support Representatives Provided By The Company Shall Minimize The Potential Of Repair Delays Caused By Misdiagnosis Of Equipment Issues And Incorrect Parts Being Ordered. The Minimization Of Delays Of Veteran Care Due To Equipment That Is Down Shall Be Limited To The Time Period Required For The Appropriate Acquisition Of Equipment And Its Efficient Repair By The Company S Representatives. 4. Scope service Maintenance Call For Equipment the Contractor Shall Provide All Parts For The Year Plus Labor And Travel Expenses For One Preventive Maintenance Call (pmc) (if Needed To Meet Factory Recommended Pm Intervals) And Up To Three On-site Service Calls Per Instrument. The Contractor Shall Provide All Applicable Software Revisions Within The Purchased Version Of Operating Software At No Additional Charge. services Maintenance Call For Parts Only parts Only - Provides For All Replacement/exchange Service Parts And Components Needed For repairs. Additional Features Of This Contract Option Include: a) Software Updates - Includes Revisions To The Originally Purchased Version Of Jaeger Masterscreen, Sentrysuite Or Vyntus Equipment Operating Software And Tutorials At No Additional Charge. b) Software Upgrades - A) Jaeger Or Sentrysuite Equipment Operating Software Upgrades When They Become Available, B) Windows Operating Software And C) Related Hardware (computer And Printer) If Required For Compatibility With Vmax Software Upgrades. c) Peripherals Protection - Provides For Parts Replacements And Coverage For The Computer, Printer, And Associated Components. d) Preferred Tech Support Assistance Shall Have At Minimum Availability Monday Through Friday From 8:00 A.m. To 4:30 P.m. Local Time (cst). e) Field Service Labor Qualified Service Technicians And Technical Support Personnel Shall Be Provided By The Contractor. 5. Requirements the Contractor Shall Fulfill The Agreement As Indicated To Perform All Upgrades, Repairs, And Replacements Of Equipment On Request Within A Reasonable Amount Of Time As Agreed On By The Contractor And Buyer. All Upgrades And Repairs Shall Be Performed By The Contractor S Representative(s) Within The Agreed Upon Time Frame And In The Presence Of The Jesse Brown Va Medical Center S Pulmonary Function Lab Technicians And/or Bio-medical Engineering Representative. 6. Selection Criteria the Criteria Utilized For The Service Contract Is The Selected Company S Ability To Obtain Parts And To Appropriately Replace Damaged Or Malfunctioning Equipment. The Technical Support And/or Field Service Representative Shall Have Completed Specialized Knowledge And Training That Was Provided By The Original Equipment Manufacturer (oem), In Providing Technical Support And Repair Of Existing Equipment, All Aspects Of Troubleshooting And Repair To Best Provide The Upgrades And Repairs For The Existing Equipment. a) The Contractor Shall Have Access To Access To Diagnostic Software And Original Equipment Repair Parts. b) The Contractor Shall Have Access To The Oem Server As Well As The Va Server, With Access To Be Performed Only With Pre-approval And In Conjunction With Providing Access And Monitoring Of Contractor By Appropriate Va Employees. 7. Deliverables the Contractor Shall Provide Technical Support And Field Service Representatives For Troubleshooting, Preventative Maintenance, And Repairs Of Equipment From Fully Trained Employees On Request. The Contractor Shall Provide All Appropriate Parts As Covered In The Service Agreement. On Completion Of Work, The Contractor Shall Provide Timely Billing Of Items That Buyer Is Responsible Per The Service Agreement. Any Repairs Or Upgrades That Requires Technical Support Access To The Server Shall Only Be Performed With Pre-approval And In Conjunction With Providing Access And Monitoring Of Contractor By Appropriate Va Employees. 8. Service scheduled Preventive Maintenance Work Shall Be Required In The Performance Of This Contract And Shall Be Performed During The Hospital S Normal Business Hours Of 8:00 A.m. And 4:30 P.m., Local Time (cst), Excluding Federal Holidays, To Include Any Other Day Specifically Declared By The President Of The United States To Be A Federal Holiday. The Contractor Shall Notify The Contracting Officers Representative (cor) At Least 7 Calendar Days Prior To The Normal Testing/inspection Cycle Visit And 8 Hours Prior To Any Emergency Activities. The Jesse Brown Vamc May Consider Allowing Work Outside Of The Above-listed Hours Of Operation At The Convenience Of The Government. Federal Holidays Observed By The Jesse Brown Vamc(s) Are: new Years Day Labor Day Martin Luther King, Jr. Birthday Columbus Day washington S Birthday Inauguration juneteenth National Independence Day Labor Day independence Day Veterans Day memorial Day Thanksgiving Day christmas Day Columbus Day when One Of The Above Designated Federal Holidays Falls On A Sunday, The Following Monday Shall Be Observed As A Federal Holiday. When A Federal Holiday Falls On A Saturday, The Preceding Friday Shall Be Observed As A Federal Holiday By United States Government Agencies. If Different Times Shall Be Needed, This Shall Be Discussed And Mutually Agreed Upon With The Cor And Shall Still Be Considered Normal Business Hours. If Work Must Be Performed Outside Of Mutually Agreed Normal Business Hours ( Over-time Work), The Contractor Shall Obtain Prior Approval At Least 24 Hours From The Cor. If Such Work Shall Be At The Cost Of The Jesse Brown Vamc, A Separate Purchase Order Number Must Be Obtained By The Contractor Prior To Performing Any Over-time Work. Work Shall Be Scheduled In Such As Manner As To Allow As Little Disruption To Patient Services In All Campus Buildings Affected. 9. Security all Contractor Representatives Shall Only Be On Site During The Regular Business Hours Of The Pulmonary Function Lab, Monday Through Friday From 8:00 A.m. To 4:30 P.m. Local Time (illinois) When Management, Pulmonary Technicians Or Bio-medical Department Representatives Are Present And Shall Have Appropriate Identification That Is Easily Visible On Their Person. All Technical Support That Requires Contractor Access To The Equipment Server Shall Always Have Management Of The Lab Or A Representative From Bio-medical Engineering Department To Provide Access And Monitoring Of Work. 10. Reporting Requirements the Check-in Is Mandatory At Medical Center, Pulmonary Function Lab, Room #2254 At 820 S. Damen Avenue, Chicago, Illinois 60612. When The Service Is Completed, The Field Support Technician (fst) Or Technical Support Representatives (tsr) Shall Document Services Rendered On A Legible Equipment Service Report(s) (esr). The Fst Or Tsr Shall Be Required To Sign Out With A Representative From The Pulmonary Function Lab And Submit The Esr(s) To The Cor. All Esr S Shall Be Submitted To The Equipment User For An "acceptance Signature" And To The Cor For An "authorization Signature" Of Approval. jesse Brown Va Medical Center Phone Number: 312-569-8387 va Biomedical Contact Person(s): The Cor Delegation Notice Shall Be Provided At Time Of Award. contractor Contact Personnel Information: The Information Shall Be Produced At Time Of Award. if Your Company Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information:1) Company Name, Address, Email Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Company; 2) Tailored Capability Statements Addressing The Particulars Of The Above Statement Of Work And Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Companies Should Address The Administrative And Management Structure Of Such Arrangements; And 3) Confirmation Your Company Can Meet The Limitations Of Subcontracting Should They Apply (see Below) the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated. based On The Responses To This Synopsis And Other Market Research, This Requirement May Be Set-aside For Veteran-owned Small Businesses (sdvosbs Or Vosbs) (limitation Of Subcontracting Would Apply), Small Businesses (limitations On Subcontracting Would Apply) Or Procured Through Full And Open Competition, Or Procured Through Sole Source Contract. limitations On Subcontracting 13 Cfr §125.6 Will Apply To Any Procurement Set-aside For Veteran-owned Small Businesses (sdvosbs Or Vosbs) Or Small Businesses. 13 Cfr §125.6 States: (a) General. In Order To Be Awarded A Full Or Partial Small Business Set-aside Contract With A Value Greater Than The Simplified Acquisition Threshold (as Defined In The Far At 48 Cfr 2.101) In Paragraph (a) Introductory Text; And An 8(a) Contract, An Sdvo Sbc Contract, A Hubzone Contract, A Wosb Or Edwosb Contract Pursuant To Part 127 Of This Chapter, A Small Business Concern Must Agree That: (1) In The Case Of A Contract For Services (except Construction), It Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Similarly Situated. Any Work That A Similarly Situated Subcontractor Further Subcontracts Will Count Towards The 50% Subcontract Amount That Cannot Be Exceeded. before Any Small Or Large Business Can Be Awarded A Federal Contract, A Contracting Officer (co) Must Affirmatively Determine That The Firm Is Responsible To Perform The Specific Contract It Is Otherwise In Line To Receive. If An Apparent Small Business Successful Offeror Is Denied A Contract Award Because It Lacks Certain Elements Of Responsibility, The Co Will Refer The Matter To The Small Business Administration. Once A Co S Referral Is Received By The Sba S Area Office, The Sba Will Then Inform The Small Business Of The Co S Determination And Offer It The Opportunity To Apply To The Sba For A Certificate Of Competency By A Specific Date. Burden Of Proof Is On The Small Business To Demonstrate That It Meets Specific Coc Eligibility Criteria. after Award, If A Co Or Other Va Officials Determine A Review Of Limitations On Subcontracting Compliance Is Warranted Based Upon Reasonable Information Of Possible Noncompliance, A Request For Review Will Be Submitted To Va S Subcontracting Compliance Review Program. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By 10:00 Am Cst On January 17, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Della.bond@va.gov. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions.

Details: Sources Sought Notice n00019-24-rfpreq-tpm273-0095 t-45 F405 Engine Contractor Logistics Support (cls) Fy27-32 naics: 336412, Aircraft Engine And Engine Parts Manufacturing psc: J028 place Of Performance: Naval Air Station Kingsville (nask), Naval Air Station Meridian (nasm), Naval Air Station Pensacola (nasp) And Naval Air Station Patuxent River 1.0 Introduction naval Air Systems Command (navair) In Patuxent River, Md Along With The Naval Undergraduate Flight Training Systems Program Office (pma-273) At Naval Air Systems command (navair), Also Located At Patuxent River, Md Is Conducting A Market Survey Of Industry To Identify Potential Sources Capable Of Providing The Skills And Experience Required To Perform All Intermediate (i)-level And Depot (d)-level Maintenance And Logistics Support For The F405-rr-401 Engine And Mk Ii Gas Turbine Starter (gts). The Contract Will Include All Necessary Engineering Support To Maintain The Engine At The Organizational (o)-level, I-level And D-level. Engine Repair Services Will Be In Support Of Various Naval Air Station Facilities For The T-45 Goshawk Aircraft’s Engine Cls Contract. This Requirement Is Anticipated To Be A Five-year Idiq Contract, Beginning In Late Fiscal Year (fy) 2027 And Through Late Fy 2032. this Notice Serves As A Market Research Tool Conducted In Accordance With Federal Acquisition Regulations (far) Part 10 To Assess Potential Sources And Their Technical Capabilities For The F405 Engine Contractor Logistics Support (cls) Contract. The Findings From This Market Research Will Assist In Determining The Appropriate Procurement Strategy, Including Whether To Issue A Competitive Solicitation Or Make A Sole Source Award To Rolls Royce, The Designer, Developer And Manufacturer Of The F405-rr-401 Adour Engine. Only Those Firms Who Believe They Possess The Capability To Provide The Required Supplies And Services And Can Meet The Requirements As A Prime Contractor Or As A Joint Venture Are Invited To Respond To This Notice. primary Work Location/place Of Performance: nas Kingsville, Tx Percentage Of Total Effort ~ 50% On-site Government – 100% nas Meridian, Ms Percentage Of Total Effort ~ 40% On-site Government – 100% nas Pensacola, Fl Percentage Of Total Effort ~ 10% On-site Government – 100% nas Patuxent River, Md Percentage Of Total Effort – <1% On-site Government – 100% various Detachments To Support Carrier Qualifications Percentage Of Total Effort – <1% On-site Government – 100% contractor Program Management, Engineering, Administrative & Manufacturing Support Percentage Of Total Effort – Unknown On-site Government – 0% 2.0 Disclaimer this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Sources Sought Is Strictly Voluntary. 3.0 Anticipated Contract Type And Contract/program Background the Government Anticipates This Follow-on Contract Will Be A Single-award, Indefinite Quantity, Indefinite Delivery (idiq) Contract, Primarily Utilizing -fixed-price Clins To Support A Minimum Of 65,000 Flight Hours Annually. Task Orders For Services Will Likely Be Issued On A “power By The Hour” Basis, Where The Government Will Pay A Firm-fixed-price For Each Actual Flight Hour Flown By The Training Wings. In Addition, The Government May Negotiate And Award Additional Task Orders For Engine Repairs, Obsolescence Mitigation, And Other Related Requirements To Support The Engine Ecosystem, Specifically In The Of Training Of Student Naval Aviators. the Incumbent Contract Information Is As Follows: incumbent Contractor: Rolls Royce contract Number: N00019-22-d-0042 contract End Date: 31 July 2027 contract Type: Single Award Idiq previous Set-aside Designation: Sole Source program Background: The Rolls-royce Model F405-rr-401 Adour Engine Is The Power Plant For The T-45 Aircraft, Which Is Used To Perform The United States Navy (usn) Undergraduate Jet Pilot Training Mission. The T-45ts Is The First Totally Integrated Training System Developed For And Used By The Usn. It Includes The Boeing-built T-45goshawk Aircraft, Advanced Flight Simulators, Computer-assisted Instructional Programs, A Computerized Training Integration System, And A Contractor Logistics Support Package. The T-45ts Replaced Two Training Aircraft And Added Advanced Simulators To Improve The Process For Training U.s.navy And Marine Corps Pilots For Conversion Into The F/a-18a-d Hornet, The F/a-18e/f Super Hornet, The E/a-18g Growler, Jsf, E-2d And The Av-8b Harrierii Plus.rolls-royce Is The Sole-source Manufacturer Of The F405-rr-401 Adour Engine. navair Has Obtained A Limited Rights License For A Minimal Quantity Of The F405-rr-401 Series Engine Data. However, It Is Not A Comprehensive Technical Data Package. As The Sole Engine Manufacturer, Rrc Is The Only Source With The Technical Data Required To Engineer And Produce The F405-rr-401 Engine Parts, As Well As Perform I-level And D-level Maintenance. Additionally, Rrc Bristol Holds The Design Authority For The Engine’s Hot Section, While The Partnership With Safran Who Serves As The Design Authority For The Engine’s Cold Section. Rrc Possesses The Capabilities And Resources To Forecast Parts And Logistics Requirements, Adjusting Its Manufacturing Priorities In Real Time To Meet Maintenance Requirements. Companies That Are Capable Of Meeting This Requirement, Currently Possess Or Have Authorized Access To The Necessary Technical Data Or Have A Viable Plan To Obtain, Generate, Or Otherwise Secure The Necessary Technical Data, And Can Maintain This Capability Throughout The Duration Of The Effort Being Solicited Are Encouraged To Respond. Companies May Also Highlight Unique Data Generation Techniques That Are Currently Utilized By Your Firm Or Areas Where Modifications Can Be Performed, Or The Capability Can Be Provided, Without Technical Data Provided By The Government Or Oem. Interested Businesses Or Organic Sources Shall Demonstrate The Capability To Meet The Government’s Required Timeline. You May Also Submit Information That Demonstrates How You Could Potentially Meet This Requirement For Future Production Opportunities. current Contract Requirements Include: deliver 170 Ready For Issue (rfi) Engines Daily To Cnatra For The Duration Of The Contract;  deliver 2 Rfi Engines Daily To Nas Patuxent River; deliver 185 Rfi Gts Systems Daily To Cnatra; deliver 2 Rfi Gts Systems Daily To Nas Patuxent River For The Five-year Contract Term;  deliver Final Engineering Investigation Reports Within 180 Calendar Days Of Event; manage The F405 & Gts System Supply Chain To Meet Or Exceed The Daily Availability Metrics; aviation Maintenance Management Team (ammt) Government Inspection Results With No More Than Two Areas Graded As Non-compliant;  international Organization For Standardization (iso) 9000/1400 And Aerospace Standard (as) 9100 Certified; And repair Severely Damaged Engines. 4.0 Special Requirements And Required Capabilities n/a 5.0 Eligibility the Applicable Naics Code For This Requirement Is 336412, Aircraft Engine And Engine Parts Manufacturing With A Small Business Size Standard Of 1,500 Employees. the Product Service Code Is J028, Maint/repair/rebuild Of Equipment- Engines, Turbines, And Components businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size In Their Capabilities Statement. Note: Far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance. Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far). to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics That You As The Prime Would Assign For Their Workshare. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In The Sources Sought Notice (ssn) In Order To Assist The Government’s Capability Determination. 6.0 Submission Requirements a. Interested Parties Should Address The Following Questions In Their Response. The Responses To These Questions Will Aid The Government In Determining Whether A Company Is Capable In Performing The Requirement, So It Is Important To Address These Areas With Specific Details: what Similar Corporate Experience In Maintaining, Repairing, Rebuilding, And Testing Aircraft Engines Does Your Firm Possess? What Similar Experience In Complex Supply Management Does Your Firm Possess? what Is Your Firm’s Approach To Data Rights Mitigation To Support This Requirement? is Your Firm As9100d And/or Iso9000/1400 Certified? what Engineering Resources Does Your Firm Have Available To Support Engine Maintenance And Manufacturing Operations? What I And D Level Resources (both Management And Front Line Maintainers) Does Your Firm Have Available To Support Engine Maintenance Operations? does Your Firm Have Experience In Using Navy Maintenance And Supply Software? please Note That Under A Small-business Set-aside, In Accordance With Far 52.219-14, The Small Business Prime Must Perform At Least 50% Of The Work Themselves In Terms Of The Cost Of Performance. Provide An Explanation Of Your Company’s Ability To Perform At Least 50% Of The Tasking Described In This Pbsow For The Base Period As Well As The Option Periods. Similarly Situated Small Businesses May Team Together To Meet The 50% Requirement. If Your Company Is Planning To Team With A Similarly Situated Small Business, The Response Must Clearly Identify The Proposed Team Members And The Capability Statement Must Clearly Articulate Which Portion Of The Work Each Team Member Will Be Responsible For. The Response Must Be Detailed Enough For The Government To Make A Determination Whether Or Not The Proposed Team Will Be Able To Perform 50% Of The Work When Combined. provide A Statement Including Current Small/large Business Status And Company Profile To Include Number Of Employees, Annual Revenue History, Office Locations, Unique Entity Identifier (uie) Number, Etc. respondents To This Notice Also Must Indicate Whether They Qualify As A Small, Small Disadvantaged, Women-owned, Hubzone, Or Service Disabled Veteran-owned Small Business Concern Under The Naics Code Identified For This Requirement. b. Interested Parties Shall Adhere To The Following Instructions For The Submittal Of Their Capabilities Statements: page Limit And Format: Ten (10) 8.5 X 11 Inch Pages In Times New Roman Font Of Not Less Than 10 Point. document Type: Microsoft Word Or Adobe Pdf Are Acceptable delivery: Email To Contracting Officer, Thomas Conrow (thomas.w.conrow.civ@us.navy.mil), Contract Specialist Erin Allison (erin.e.allison.civ@us.navy.mil), And Contract Specialist Lcdr Ronald Parry (ronald.r.parry1@navy.mil) response Date: Responses Are Due By 2:00pm Est Or Edt On 17 January 2025. no Classified Information Shall Be Submitted In Response To This Sources Sought. no Phone Calls Will Be Accepted. all Questions Must Be Submitted Via Email To The Contract Specialist Named Above all Responses Shall Include Sources Sought Notice Name/number, Company Name, Company Address, Company Business Size, And Points Of Contact (poc), Including Names, Phone Numbers, And Email Addresses. all Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Fully Protected From Any Release Outside The Government. any Information Or Materials Provided In Response To This Sources Sought Notice Will Not Be Returned. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To This Sources Sought Notice.

Details: This Is A Small Business Sources Sought Notice. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. the Purpose Of This Notice Is To Obtain Information Regarding: (1) The Availability And Capability Of Qualified Small Business Sources; (2) Whether They Are Small Businesses; Hubzone Small Businesses; Service-disabled, Veteran-owned Small Businesses; 8(a) Small Businesses; Veteran-owned Small Businesses; Woman-owned Small Businesses; Or Small Disadvantaged Businesses; (3) Their Size Classification Relative To The North American Industry Classification System (naics) Code For The Proposed Acquisition. your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible. An Organization That Is Not Considered A Small Business Under The Applicable Naics Code Should Not Submit A Response To This Notice. this Notice Is Issued To Help Determine The Availability Of Qualified Companies Technically Capable Of Meeting The Government Requirement And To Determine The Method Of Acquisition. It Is Not To Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract. Responses Will Not Be Considered As Proposals Or Quotes. No Award Will Be Made As A Result Of This Notice. The Government Will Not Be Responsible For Any Costs Incurred By The Respondents To This Notice. This Notice Is Strictly For Research And Information Purposes Only. background: Alzheimer’s Disease (ad) And Related Dementias Have No Effective Treatments To Halt Or Reverse Disease Progression. The Complexity Of These Diseases, Driven By Genetic, Molecular, And Environmental Factors, Requires An Innovative, Data-driven Approach To Accelerate Scientific Discovery. Bioinformatics, At The Intersection Of Biology, Computer Science, And Statistics, Is A Critical Tool That Empowers Researchers To Address This Challenge. Together, The Scientific Staff At The National Institute On Aging (nia) Center For Alzheimer’s And Related Dementias (card) Will Work Directly With The Contractor’s Bioinformatics Team On The Integration And Analysis Of Large, Multidimensional Datasets—imaging, Genomic, Proteomic And Transcriptomic Data Integrated With Clinical Measurements— To Enable The Identification Of Novel Drivers Of Disease Pathogenesis, The Discovery Of Biomarkers For Stratification And Early Diagnosis, As Well As New Therapeutic Targets. the Necessity Of Advanced Analytics In Alzheimer’s Disease And Related Dementias Research Is Underscored By The Increasing Volume And Complexity Of Data Generated By New Platforms Such As Spatial Transcriptomics And Single Cell Proteomic, Epigenetic And Transcriptomics. Card Needs A Partner In Advanced Analytics That Can Keep Pace With These New Platforms And Analytical Tools, To Uncover Insights Needed To Fully Understand The Molecular Underpinnings Of Disease. Bioinformatics, Analytics And Statistics Will Provide Computational Tools To Integrate Diverse Data Types, Identify Patterns And Associations That Are Not Readily Apparent, And Predict Disease Mechanisms. The Contractor Must Work With The Scientific Staff To Visualize And Interpret Data. The Team Will Also Help Foster And Lead Collaborations Across Groups Within And Outside The Nih. moreover, The Contractor Is An Essential Resource Driving Group. The Team Analyzes Diverse Publicly Available Datasets And Provides Insightful Interpretations. Advanced Analytics Also Aligns With Card’s Structural Priorities, Including Data Democratization, Transparency, And Reliability, Ensuring That Alzheimer’s And Related Dementias Research Is Inclusive, Reproducible, And Impactful Across The Global Scientific Community. The Advanced Analytic Teams Should Be Capable Of Designing And Implementing Solutions That Improve Data Accessibility, Quality, And Interoperability Across The Scientific Community, Ensuring That Card Data Adheres To The Fair Principles And Integrates Seamlessly With Fhir-based Standards, Enabling More Effective Data Exchange And Utilization In Operational Contexts. this Support Is Currently Provided Via Indefinite Delivery Indefinite Quantity Contract 75n95020d00014. The Current Contractor Is Dataconsult-io And The Current Ordering Period Is August 24, 2020 – August 23, 2025. purpose And Objectives: The Purpose Of This Requirement Is To Procure Scientific Data Consulting Services Related To Neurodegenerative Diseases In Support Of The National Institute On Aging (nia), Center For Alzheimer’s And Related Dementias (card). project Requirements: The Contractor Shall Provide Scientific Data Consulting Support Services In Relation To Alzheimer’s Disease And Related Dementias As Follows: task Categories /tasks: general Analytics Support, Guidance, And Training • Provide Guidance And Recommendations Regarding Statistical And Computing Processes Related To Analyzing The Data Generated By Card Scientists. This Includes Many Established Assays And Platforms As Well As Newly Developed Omic Platforms. Card Is Flexible And Dynamic, Data Analysis Needs May Change Quickly And The Team Will Be Adaptable. Contractor Shall Provide Previous Experience With Uk Biobank Research Analysis Platform, Verily Workbench, Terra, Azure, And Google Cloud Platforms. • Analyze Molecular Biology And Genomic Data. Including Genome-wide Genotype Data, Crispr Studies, Whole Genome/exome Sequencing, And Transcriptomic Sequencing, Using Standard Biostatistics/bioinformatics Packages As Well As Machine And Deep Learning Methods • Collaborate With Nih Scientists And Other Nih Collaborators To Perform Multi-national Analytics And Data Management Efforts Related To The Genomics Of Neurodegenerative Diseases Within A Meta-analysis And “big Data” Framework. • Lead Studies Analyzing Biobank Scale Datasets In Neurodegenerative Disease • Conduct Formal Systemic Reviews In Collaboration With Other Nih Ics And External Teams In The Neurodegenerative Disease Space • Prepare Manuscripts Related To Analyses Performed In Relation To This Requirement in This Task Category, The Contractor Shall Work Closely With The Nia Scientific Staff. Whenever Possible, The Contractor Shall Work Closely With The Scientific Team To Collaborate, Understand The Wet Lab Practices And Quality Control Metrics That Are Necessary For High Quality Data Output. The Contractor Shall Work Closely With The Scientific Staff To Interpret The Biological Meaning Of The Data In Order To Create The Best Tables, Tools, And Visualizations To Identify And Highlight Data Outcomes. standard Analytics Tool/pipeline Application • Manipulate Genome-scale, Proteomics, Whole Genome Short And Long Read Sequencing Data, Transcriptomic Data, Single Cell, Spatial And Imaging Data As Directed, Building Applications To Democratize These Data Types For The Card And Nih Community • Analyze Molecular Genetics And Genomic Data, Including Genome-wide Genotype Data, Crispr Screens, Transcriptomics, Single Cell And Spatial Technologies, Short And Long Read Sequencing Using Standard Biostatistics/bioinformatics Packages As Well As Machine And Deep Learning Methods. • Develop, Implement, And Maintain Cloud-based Analytic Pipelines For Generating And Analyzing Multi-modal Datasets • Develop Safe Applications In The Ai Space To Accelerate The Research Process In The Area Of Neurodegenerative Disease. in This Task Category, The Contractor Shall Collaborate With The Scientific Staff At Card To Prioritize Datasets For Analysis And Data Interpretation. The Teams Will Work Together To Create Standardized, Best Practices For Data Analysis. tool Testing, Development And Implementation • Assay Platforms Are Constantly Growing And Improving. Tools To Analyze, Visualize And Interpret The Data Also Grow Significantly. The Contractor Shall Spend Some Time Testing Tools For A Given Task, Interpreting How They Work, Which Ones Provide Better/useful Outputs, Are More Consistent, And/or Considered Community Best Practices From Papers. Tools Will Be Prioritized And Evaluated As A Collaborative Effort With The Scientific Team. • Some Tools Have Limits That Do Not Allow Card Researchers To Ask Important Questions. The Contractor, When They Are Able, Should Work With Researchers To Develop Better Tools For Data Analysis. It Is Important To Establish Together What Current Limitations Are Most Important To Prioritize. in This Task Category, The Contractor Shall Work With The Scientific Staff To Identify The Limits Of Current Tools And Where New Tool Development Could Provide Better Insights Into Disease Mechanisms, Biomarkers, Or Therapeutic Targets. New Assays Are Constantly Being Developed And New Questions About What The New Datatypes Can Reveal Are Being Considered. The Most Useful Prioritization Of Resources And Skill Sets Would Require The Scientific Staff And The Contractor Working Closely On How To Develop Better Tools And Applications That Overcome Current Limitations. management Of Analytic Ecosystem And Analytics Projects • Manipulate Genome Wide Array, Short And Long Read Sequence Data As Directed, Sharing In Cloud-based Open Science Platforms And On Nih’s Biowulf Cluster. • Analyze Molecular Genetics And Genomic Data, Including Genome-wide Genotype Data, Crispr Screens, Short And Long Read Whole Genome And Transcriptomic Sequencing, Using Standard Biostatistics/bioinformatics Packages As Well As Machine And Deep Learning Methods. • Develop, Implement, And Maintain Cloud-based Analytic Pipelines For Generating And Analyzing Multi-modal Datasets. • Collaborate With Nih Scientists And Other Nih Collaborators To Perform Multi-national Analytics And Data Management Efforts Related To The Genomics Of Neurodegenerative Diseases Within A Meta-analysis And “big Data” Framework. • Build And Maintain Safe Ai Infrastructure For Data Harmonization Supporting Fhir And Fair Data. • Build And Maintain Collaborative Knowledge Transfer Utilities In The Cloud For Public Consumption Of Research Deliverables. in This Task Category, The Contractor Shall Help Build The Data Infrastructure To Ensure That Datasets Are Properly Managed, Documented, And Available For Efficient Reuse. Work Closely With Data Stewards And Researchers To Improve Data Findability, Accessibility, And Interoperability. Work With Clinicians And Researchers To Ensure Data Standards Align With Clinical Needs, Regulatory Compliance And Research Objectives. Stay Up To Date With The Latest Advancements In Fair, Fhir Data Standards. anticipated Period Of Performance: The Government Anticipates An Indefinite Delivery Indefinite Quantity (idiq) Contract With An Ordering Period Of Five (5) Years. capability Statement/information Sought: companies That Believe They Possess The Capabilities To Provide The Required Services Should Submit Documentation Of Their Ability To Meet Each Of The Project Requirements To The Contracting Officer. The Capability Statement Must Specifically Address Each Of The Project Requirements Separately. Additionally, The Capability Statement Should Include 1) The Total Number Of Employees, 2) The Professional Qualifications Of Personnel As It Relates To The Requirements Outlined, 3) Any Contractor Gsa Schedule Contracts And/or Other Government-wide Acquisition Contracts (gwacs) By Which All Of The Requirements May Be Met, If Applicable, And 4) Any Other Information Considered Relevant To This Program. Capability Statements Must Also Include The Company Name, Unique Entity Id From Sam.gov, Physical Address, And Point Of Contact Information. The Response Must Include The Respondents’ Technical And Administrative Points Of Contact, Including Names, Titles, Addresses, Telephone And Fax Numbers, And E-mail Addresses. interested Companies Are Required To Identify Their Type Of Business, Applicable North American Industry Classification System (naics) Code, And Size Standards In Accordance With The Small Business Administration. The Government Requests That No Proprietary Or Confidential Business Data Be Submitted In A Response To This Notice. However, Responses That Indicate The Information Therein Is Proprietary Will Be Properly Safeguarded For Government Use Only. Capability Statements Must Include The Name And Telephone Number Of A Point Of Contact Having Authority And Knowledge To Discuss Responses With Government Representatives. Capability Statements In Response To This Market Survey That Do Not Provide Sufficient Information For Evaluation Will Be Considered Non-responsive. When Submitting This Information, Please Reference The Solicitation Notice Number. one (1) Copy Of The Response Is Required And Must Be In Microsoft Word Or Adobe Pdf Format Using 11-point Or 12-point Font, 8-1/2” X 11” Paper Size, With 1” Top, Bottom, Left And Right Margins, And With Single Or Double Spacing. the Information Submitted Must Be In An Outline Format That Addresses Each Of The Elements Of The Project Requirement And In The Capability Statement /information Sought Paragraphs Stated Herein. A Cover Page And An Executive Summary May Be Included But Is Not Required. the Response Is Limited To A Ten (10) Page Limit. The 10-page Limit Does Not Include The Cover Page, Executive Summary, Or References, If Requested. all Responses To This Notice Must Be Submitted Electronically To The Contract Specialist. Facsimile Responses Are Not Accepted. the Response Must Be Submitted To Hashim Dasti, Contract Specialist, At E-mail Address Hashim.dasti@nih.gov. the Response Must Be Received On Or Before January 24, 2025 At 11am Eastern Time. disclaimer And Important Notes: This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Qualifications To Perform The Work. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Presolicitation Synopsis And Solicitation May Be Published In Www.sam.gov. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality: No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).

Details: The Medical Technology Enterprise Consortium (mtec), In Support Of The U.s. Army Medical Research And Development Command (usamrdc), And Defense Health Agency (dha), Is Excited To Post This Request For Project Information (rpi) Focused On Surveying The Current Manufacturing Capabilities Of Single Blood Donor/storage Bags Within The Bounds Of The Contiguous United States. purpose Of The Project Information Paper: this Request For Project Information (rpi) Contains Background Material And Guidance For The Preparation Of Project Information Papers To Mtec. Project Information Papers Will Be Reviewed By The Sponsor And Used In A Manner That Shapes Dha Efforts In This Technology Space. The Results Of The Project Information Paper Submission Will Serve To Assess The Development Landscape And Potentially Focus Efforts That Will Follow. as A Note: This Rpi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. Neither Unsolicited Proposals Nor Any Other Kind Of Offers Will Be Considered For Award In Response To This Rpi. Responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rpi. All Information Received In Response To This Rpi That Is Marked “proprietary” Will Be Handled Accordingly. focus Area Of Interest: in Accord With The Department Of Defense (dod) 2022 National Defense Strategy Identifying Building Enduring Advantages, There Is An Effort To Invest In Manufacturing Capabilities Within The Continental United States (conus) As Part Of Efforts To Bolster The Defense Industrial Base (dib) And Securing Domestic Supply Chains. In Recent Years, There Has Been A Shortage Of Much needed Blood Storage Bags, And This Is Acute Within The Dod System Where There Is A Requirement For Singly Wrapped Blood Bags For Use In Far Forward Situations. “today’s Dib Requires Additional Investment From Private And Government Sources To Modernize Infrastructure And Capacity To Provide Military Capabilities At The Speed And Scale Necessary For The U.s. To Prevail In A Near‐peer Conflict. To Adapt And Fortify Our Existing Capabilities And Capacities, The Department Needs To Focus On Investment And To Buy Down Supply Chain Risk And Expand Capacity.” dod’s Diverse Warfighting Capabilities Means That Sailors, Marines, Soldiers, Airmen, Guardians And Joint Special Operations Service Members Operate In A Vast Array Of Challenging, Remote, And Austere Environments. In Forward Positions There Is A High Probability Of Traumatic Injury And Wounds Leading To Blood Loss. Hemorrhage Is The Leading Cause Of Death In Combat Zonetrauma. The Gold Standard For Immediate Treatment Of Hemorrhage Is Transfusion Of Whole Blood However, The Availability Of Whole Blood And Conventional Blood Products On Forward Missions Is Challenging. In Recent Years There Have Been Supply Chain Disruptions Across The Continuum Of Military And Civilian Products. This Includes Components Used In The Manufacture Of Blood Bags From The Polymer Components To The Anticoagulant/preservative Solutions Within The Bag. This Has Resulted In Shortages Of Single Blood Storage Kits Most Often Used In Austere Environments Especially For Walking Donors. According To The Us Food And Drug Administration center For Biologics Evaluation And Regulation For Regulated Products Shortages Website, The Shortage Of Series Of Blood Collection Bag Kits And Products Is Described As Ongoing. Shortages Of Ingredients, Components And Manufacturing Supplies, And Release Timing Issues Are Intermittent And Unpredictable. Product May Be Placed On Allocation As Necessary To Manage Reduced Or Unavailable Supply. This Vital Product Is Needed In Steady Supply To Meet The Needs Of Aiding Wounded Warriors Within The Golden Hour, Or Sooner, Out In The Field At The Point Of Injury With Donated Blood. Our Approach Is To Stand Up Or Bolster Domestic Production. the Government Seeks Project Information Papers Regarding The Development Of A Prototype System Detailing The Following: production Of A Bag Within The Contiguous United States Within 2 Years Of Award That Meets The Following Existing Specification: individually Wrapped Single Aseptic Collection Bag compliant With Fda (21 Cfr 864.9100), Iso 10993 And 3826, Usp And Mil 810h Standards And Guidance. supports Whole Blood Donor Phlebotomy Of 500ml (+/‐10%, 450‐550 Ml) Or 450 Ml (+/‐10%, 405‐495 Ml). contains A Solution Of Anticoagulant And Preservatives Meeting The Usp Standards That Allows For Storage Of Blood For At Minimum 21 Days Up To 35 Days. foil Wrapping That Is Easy To Open Requiring No Tools And If Practical, Textured For Better Grip With Brightly Marked Notches Not Only At The Corners But Also In The Center Of The Packaging. the Manufactured Bags Should Have A Shelf Life Of 18 ‐ 24 Months At Room Temperature. appropriate Fatigue And Distortion Testing. experience Designing Medical Devices Specifically Blood Products And Adhering To Verification And Validation Guidance. within 2 Years, Capability To Manufacture No Less Than 10,000 Standard Blood Donor/storage Bags Per Year And Have A Surge Capability Plan During Times Of Increased Demand For Full Single Blood Bag Kits With Compliant Materials And Processes. any Established Current Good Manufacturing Practice (cgmp) Ready Methods With Fully Designed Hardware And Functional Disposables. manufacturers Implementing Gmp That Require Financial Assistance To Meet All Requirements Of The U.s. Food And Drug Administration (fda) With Clear Standardoperating Procedures And Compliance Documentation (21 Cfr 864.9100) Shall Provide Appropriate Substantiating Information, Including A Workflow For Obtaining Gmp Certification. demonstrable Redundancy In Sourcing Of Raw Materials From Multiple Vendors. a Notional Rough Order Of Magnitude Estimate Of Proposed Program Cost Inclusive Of Any Cost Share And Other Funding Sources That The Offeror Has Secured. requirements Of The Project Information Paper: project Information Papers Should Clearly Describe Expertise In Each Of The Aforementioned Areas As It Relates To The Manufacturing Of Blood Bags. Interested Parties Are Encouraged To Submit Project Information Papers Using The Template Included In Addendum 1 Of This Rpi. mtec Is Seeking Input From Both Mtec Members And Non‐members Via A Project Information Paper To Be Considered By The Government. Project Information Papers Will Be Shared With The Reviewers Under Non‐disclosure Agreements. project Information Papers May Be Submitted At Any Time During The Submission Period But No Later Than The Due Date And Time Specified On The First Page Of This Rpi Using Bids: Https://submissions2.ati.org/ati2/portal.nsf/start?readform. See Addendum 2 Of This Rpi For Further Information Regarding Bids Registration. Mtec Membership Is Not Required For Submission Of Project Information Paper. mtec: the Mtec Mission Is To Assist The U.s. Army Medical Research And Development Command (usamrdc) And The Defense Health Agency (dha) By Providing Cutting‐edge Technologies And Supporting Life Cycle Management To Transition Medical Solutions To Industry That Protect, Treat, And Optimize Warfighters’ Health And Performance Across The Full Spectrum Of Military Operations. Mtec Is A Biomedical Technology Consortium Collaborating With Multiple Government Agencies Under A 10‐year Renewable Other Transaction Agreement (ota), Agreement No. W81xwh‐15‐9‐0001, With The U.s. Army Medical Research Acquisition Activity (usamraa). Mtec Is Currently Recruiting A Broad And Diverse Membership That Includes Representatives From Large Businesses, Small Businesses, “nontraditional” Defense Contractors, Academic Research Institutions And Not‐for‐profit Organizations. points Of Contact: for Inquiries, Please Direct Your Correspondence To The Following Contacts: technical And Membership Questions Should Be Directed To The Mtec Biomedical Research Associate, Dr. Chuck Hutti, Ph.d., Chuck.hutti@ati.org all Other Questions Should Be Directed To The Mtec Program Manager, Mr. Evan Kellinger, Mtec‐sc@ati.org

Details: W912ee - The Usace Vicksburg District Is Seeking To Identify Qualified And Capable Contractors With The Capability And Capacity To Perform The Scope-of-work Indicated, Who Are Capable Of Mobilizing Immediately With Sufficient Floating Plant To Meet The Stone Placement Production Rates Required. The Vicksburg District Is Seeking To Advertise To Award A Two-year Single Award Task Order Contract (satoc) With An Estimated Capacity Of $30,000,000 With A Minimum Guarantee Of $8,000,000. This Procurement Will Require 100% Bonding For All Task Orders Issued Under This Award. the Work To Be Performed Is Described Below. Based Upon Response To This Announcement, The Government May Determine To Set This Acquisition Aside Or Proceed With An Unrestricted Solicitation. The Applicable North American Industry Classification System (naics) Code Is 237990-other Heavy And Civil Engineering Construction, And The Related Small Business Size Standard Is $45.0m. this Notice Is Not A Request For Proposal And The Information Presented In This Announcement Will Not Obligate The U.s. Army Corps Of Engineers In Any Manner. project Specific Details: work Location: Mississippi River, River Miles 616 And 326 A.h.p.- Stone Repairs the Work Consists Of Furnishing All Plant, Labor, Materials, And Equipment Needed, And Performing All Stone Repairs To Revetments And Dikes At Various Locations On The Mississippi River Between Miles 616 And 326 A.h.p. Principal Features Of Work Include Grading; Earth Or Sand Fill, And Subgrade Excavation; Stone Paving, Stonefill And Subaqueous Stone Placement; Removing Pavement; Breaking Out Paving; Rearranging Disarranged Concrete Paving; Degrading Of Stone Along Revetments And/or Stone Bendway Weirs; Repair To Dikes, Including Placement Of Stone Fill In Specified Areas Of Minor Damage And Stone Paving Protection; And Environmental Protection. In Addition, Some Stone Dike Locations Will Require Extensive Stone Repairs. This Work Will Be Performed In The Mississippi River And Varying Water Depths, Usually Over 20 Feet, And Strong Currents May Be Encountered. Currents Usually Encountered At The Sites Of The Work During Low Water Period May Vary From About One Mile Per Hour To Six Miles Per Hour, But Could Be Higher. the Contractor Shall Be Required To (a) Commence Work Within 10 Calendar Days After The Date Of Receipt Of Notice To Proceed, (b) Prosecute The Work Diligently, And (c) Complete The Work Ready For Use Not Later Than The Time Required To Complete The Entire Project By Maintaining An Average Stone Placement Rate Of Not Less Than 800 Tons Of Stone Placement Per Calendar Day For Revetment Stone Repair, 1,200 Tons Of Stone Placement For Dike Stone Repair, And 400 Tons Of Stone Placement For Large Dike Bank Head Repair, the Contractor Shall Be Competent In Placing Stone On The Mississippi River In Rapid Flowing River Conditions With Varying Water Depths. the Estimated Tonnages Are Based On The Best Information Available At This Time And May Vary Due To Site Conditions. requirements: interested Firms Should Submit A Capabilities Package, To Include The Following: 1. Firm's Name, Address, Point Of Contact, Phone Number, And Email Address. 2. Cage Code And Uei. 3. Firm's Interest In Participating In The Solicitation, If Issued. 4. Business Classification: Small Business (sb), Small Disadvantaged Business (sdb), Woman Owned Small Business (wosb), Veteran Owned Small Business (vosb), Service-disabled Veteran Owned Small Business (sdvosb), Historically Underutilized Business Zone Small Business (hubzone), 8(a) Program, Or Other Than Small Business (large Business). 5. Firm's Joint Venture Information (if Applicable). 6. Bonding Information (provide Bonding Limits On The Bonding Company's Letterhead): A. Single Bond B. Aggregate C. Point Of Contact For The Bonding Company 7. If Depending On Sub-contractor Capability The Interested Party Shall Submit A Letter Of Commitment From The Sub-contractor. 8. Equipment List Of Floating Plant Capable Of Performing The Scope-of-work. 9. Interested Parties Who Believe They Can Meet The Requirements Are Invited To Submit, In Writing, Complete Information Describing Their Interest And Capability To Meet All Requirements Stated Above. include Your Firm’s Capability To Execute Comparable Work Performed Within The Past 5 Years. The Provided Information Shall Include The Following: A. Brief Description Of The Project B. Customer Contact Information C. Outcome Of The Project C. Timeliness Of Performance E. Dollar Value Of The Completed Projects capability Statements Shall Describe Past Work Experience And Capability Of Work That Your Firm Has Performed As The Prime Contractor In The Areas Listed Below, That Were Performed Under One Contract. Include The Total Amount Bonded By The Submitting Firm As The Prime Contractor. Projects Must Have Been Bonded By The Submitting Firm As The Prime Contractor To Be Considered. Detail What Work Was Self-performed And What Percentage Of Work Was Subcontracted. At Least Three (3) Projects Should Be Provided To Demonstrate Competency And Experience In The Required Areas Of Work. Narratives Shall Be No Longer Than Ten Pages. areas Of Work Involving Characteristics That Are Similar To The Types Of Work Described Herein: • River-based Training Structure Construction And Repair In Conditions Such As Would Be Encounter On The Mississippi River (deep Water And Strong Currents). • Construction On A Commercially Active Navigation Channel • Placing Graded Stone A (5,000-pound Maximum Size Stone) • Monitoring Surveys • Developing Quality Assurance Project Plans • Under Water Stone Paving In Over 20-feet Depths technical Questions: 1. Describe Similar Projects You Have Experience Constructing That Demonstrate Your Capabilities To Successfully Perform This Contract. If You Are Relying On A Subcontractor’s Experience, Describe Your Subcontractor’s Relevant Experience, Your History In Successfully Working On Other Contracts With This Subcontractor, And What Experience You Have As A Prime Contractor Managing Similar Contracts. 2. What Features Of Work Would You Self-perform And What Features Of Work Would You Subcontract Out? 3. What Equipment Do You Or Your Subcontractor Own And What Equipment Would You Have To Lease In Order To Successfully Perform This Contract? 4. What Stone Source Quarries Would You Work With To Ensure Consistent Stone Supply And Delivery During Construction To Meet The Production Rates Stated In The Sources Sought Notification? 5. Do You Currently Employ Any Key Field Management Personnel Such As Superintendents, Quality Control, Or Ssho's With Experience Placing Stone For Construction Or Repair Of Stone Dikes And Revetments In Strong Currents Similar To The Scope Provided With The Sources Sought Notice? If So, Please Provide A Brief Description Of Their Roles And Relevant Experience. submit To: submission Shall Be Via Email To Kasey T. Davis, Contract Specialist At Kasey.t.davis@usace.army.mil And Copy Furnish R. Ellis Screws, Contracting Officer, At Ellis.screws@usace.army.mil. responses Should Be Sent As Soon As Possible, But Not Later Than 2:00 Pm Central Time, Wednesday, 22 January 2025. Please Use The Following Subject Line For The Email: “panmvd-25-p-0000-2191 – Stone Repairs Fy25”. Telephone Inquiries Will Not Be Accepted Or Acknowledged. all Interested Firms Must Be Registered In The System For Award Management (www.sam.gov) And Maintain An Active Registration For The Duration Of The Contract To Be Eligible For Award Of Government Contracts.

Details: (corrected) Public Notice Soq 24-039 The Parish Of Jefferson, Authorized By Resolution No.145367 Is Hereby Soliciting Statements Of Qualifications (tec Professional Services Questionnaire) From Persons Or Firms Interested And Qualified To Provide Professional Engineering Services Related To The Design And Construction Of The 6th Street Bridge At Keyhole Canal (council District 2). Deadline For Submissions: 3:30 P.m., January 24, 2025 General The Scope Of Work Associated With This Project Consists Of The Replacement Of The 6th Street Bridge At Keyhole Canal And Incidental Work As Needed. Project May Include The Following Supplemental Services: Load Rating In Accordance With The Ladotd Bridge Design And Evaluation Manual, Surveying, And Geotechnical Services. Compensation Compensation For The Required Design Services Will Be Made On An Hourly Rate Basis Or A Fixed Fee Basis, Or A Combination Of Both, Depending On Scope And Complexity Of The Work. The Parish Reserves The Right To Determine The Method Of Payment (hourly Or Fixed) For Each Individual Assignment. For Hourly Rate Work, The Firm Shall Be Compensated By The Appropriate Jefferson Parish Department On The Basis Of Their Certified And Itemized Burdened Rate In Accordance With Guidelines Established In The Ldotd Standard Rates Contained In Attachment “a” To The Standard Professional Services Agreement For Jefferson Parish. A Copy Of Attachment “a” May Be Obtained By Calling The Jefferson Parish Department Of Capital Projects At (504) 736-6833. For Fixed Fee Work, The Fee Shall Be Negotiated With The Firm By The Jefferson Parish Department Of Engineering And Shall Be Mutually Agreeable To Both Parties. Compensation For Supplemental Services, If Required, Shall Be In The Form Of A “lump Sum” Or Hourly Rate For Each Supplemental Service, Which Shall Be Mutually Agreeable To The Parish And The Consultant. All Costs Associated With This Project Shall Be Subject To Jefferson Parish Review And Approval. Minimum Requirements For Selection 1. The Persons Or Firms Under Consideration Shall Have At Least One (1) Principal Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana. A Subcontractor May Not Be Used To Meet This Requirement. (section C. Of Tec Professional Services Questionnaire); 2. The Persons Or Firms Under Consideration Shall Have A Professional In Charge Of The Project Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana With A Minimum Of Five (5) Years’ Experience. A Subcontractor May Not Be Used To Meet This Requirement. (section K. “professional In Charge Of Project:”; Of Tec Professional Services Questionnaire); 3. The Persons Or Firms Under Consideration Shall Have One (1) Employee Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana In The Applicable Discipline Involved. A Subcontractor May Meet This Requirement Only If The Advertised Project Involves More Than One Discipline (section D. Of Tec Professional Services Questionnaire). With Regard To The Questionnaire, Principal Means The Sole Proprietor Of The Firm, Or One Who Shares An Ownership Interest With Other Persons In The Firm, Including But Not Limited To, A Partner In A Partnership, A Shareholder In A Corporation, Or A Member Of A Limited Liability Corporation. Evaluation Criteria The Following Criteria Will Be Used To Evaluate Each Firm Submitting A Statement Of Qualifications: 1) Professional Training And Experience In Relation To The Type And Magnitude Of Work Required For The Particular Project - 35 Points; 2) Size Of Firm, Considering The Number Of Professional And Support Personnel Required To Perform The Type Of Engineering Tasks, Including Project Evaluation, Project Design, Drafting Of Technical Plans, Development Of Technical Specifications And Construction Administration – 10 Points; 3) Capacity For Timely Completion Of Newly Assigned Work, Considering The Factors Of Type Of Engineering Task, Current Unfinished Workload, And Person Or Firm’s Available Professional And Support Personnel. – 20 Points; 4) Past Performance On A Project In Which The Person Or Firm Assisted A Governmental Entity In Dealings With Disaster Recovery And Any Other Projects Relating To Cdbg - 10 Points (respondent Should Provide A List Of Completed Disaster Recovery Projects And/or Similar Cdbg Projects For Which Firm Has Provided Verifiable References. 5) Location Of The Principal Office - 15 Points (preference Shall Be Given To Persons Or Firms With A Principal Business Office As Follows: (a) Jefferson Parish, Including Municipalities Located Within Jefferson Parish (15 Points); (b) Neighboring Parishes Of The Greater New Orleans Metropolitan Region, Which Includes Orleans, Plaquemines, St. Bernard, St. Charles And St. Tammany Parishes (12 Points); (c) Parishes Other Than The Foregoing (10 Points); (d) Outside The State Of Louisiana (6 Points).) Location Of The Principal Office Shall Only Factor Into The Evaluation Criteria If Adequate Competition (two Or More Firms That Are Responsive And Responsible) Are Located Within Jefferson Parish; 6) Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services, In Which The Parish Prevailed Or Any Ongoing Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services Excluding Those Instances Or Cases Where The Person Or Firm Was Added As An Indispensable Party, Or Where The Person Or Firm Participated In Or Assisted The Public Entity In Prosecution Of Its Claim - 15 Points (in The Event That The Person Or Firm Fails To Provide Accurate And Detailed Information Regarding Legal Proceedings With The Parish, Including The Absence Of Legal Proceedings, The Person Or Firm Shall Be Deemed Unresponsive With Regard To This Category, And Zero (0) Points Shall Be Awarded.); 7) Prior Successful Completion Of Projects Of The Type And Nature Of Engineering Services, As Defined, For Which Firm Has Provided Verifiable References - 5 Points; Project Will Include Federal Disaster And Resiliency Funds And Therefore Will Include Associated Federal Requirements, Including Section 3, As Applicable. Statements Of Qualifications From Minority, Female-owned, And Local Firms / Individuals Are Invited. Each Firm’s Lowest And Highest Score Shall Be Dropped And Not Count Towards The Firm’s Score. Only Those Persons Or Firms Receiving An Overall Cumulative Score Of At Least Seventy (70) Percent Or Greater, Of The Total Possible Points For All Categories To Be Assigned By The Participating Technical Evaluation Committee Members Shall Be Deemed Qualified To Perform These Professional Services. All Firms (including Sub-consultants) Must Submit A Statement Of Qualifications (tec Professional Services Questionnaire). Please Obtain The Latest Questionnaire Form By Calling The Purchasing Department By Telephone At (504) 364-2678 Or Using Our Web Address: Https://www.jeffparish.gov/27/government. This Questionnaire Can Be Accessed By Clicking On The + Next To “doing Business In Jefferson Parish” On The Website And Clicking On “professional Services Questionnaires”. Submissions Will Only Be Accepted Electronically Via Jefferson Parish’s E-procurement Site, Central Bidding At Www.centralauctionhouse.com Or Www.jeffparishbids.net. Registration Is Required And Free For Jefferson Parish Vendors By Accessing The Following Link: Www.centralauctionhouse.com/registration.php. The Firms Submitting A Statement Of Qualifications (tec Professional Services Questionnaire) Must Identify All Sub-consultant Firms Which They Expect To Use To Provide Professional Services, And Submit A Statement Of Qualifications (jefferson Parish Tec Professional Services Questionnaire) For Each Sub-consultant Firm. (refer To Jefferson Parish Code Of Ordinances, Section 2-928). No Submittals Will Be Accepted After The Deadline. Affidavits Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Insurances Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Disputes/protests Relating To The Decisions By The Evaluation Committee Or By The Jefferson Parish Council Shall Be Brought Before The 24th Judicial Court. Adv: The New Orleans Advocate: December 4, 11, 18, And 25, 2024, And January 15, 2025

Details: The Following Is A Sources Sought Notice. This Sources Sought Is Seeking To Identify Qualified Sources Under North American Industry Classification System (naics) 541330, Engineering Services(a-e) Services. This Sources Sought Announcement Is For Market Research Information Only And Is To Be Used For Preliminary Planning Purposes. No Sf330s Are Being Requested And None Will Be Accepted In Response To This Notice. This Is Not A Solicitation For Proposals, And No Contract Will Be Awarded From This Notice. This Sources Sought Announcement Will Not Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Cost Incurred In Preparation Of A Response To This Notice. these Services Will Be Procured In Accordance With 40 U.s.c. Chap 11, Selection Of Architects And Engineers (formerly Known As The Brooks Architect Engineer Act) As Implemented In Far Subpart 36.6 And Dfars Subpart 236.6. the U.s. Army Corps Of Engineers (usace) Kansas City District (nwk) Seeks Qualified Ae Firms Interested And Capable Of Providing An Array Of Design Services For The Department Of Veteran's Affairs (dva) John Cochran Medical Center (jcmc) Located At 915 N Grand Blvd, St. Louis, Mo 63106. The Government Is Contemplating An Unrestricted (ur), A-e, Single Award Task Order Contract (satoc), Indefinite Delivery Contract Solicitation. The Estimated Ordering Limitation Of All Task Orders Issued Under The Satoc Will Have A Maximum Ordering Capacity Of One Hundred Million ($100,000,000.00) Dollars. The Base Ordering Period For This Contract Will Be Five (5) Years With One Option To Extend The Ordering Period For An Additional Five (5) Years. It Is Anticipated That A Solicitation Announcement Will Be Published In The Procurement Integrated Enterprise Environment In The 2nd Quarter Of Fy2026. firms Must Be Capable Of Performing Work To Support The Planning, Design, And Construction Phase Services For The Construction Of A New Health Care Facility And Supporting Facilities. Firms Must Be Capable Of Progressing The Current Conceptual Schematic Design Using The Collaborative Integrated Design And Construction (idac) Project Delivery Method. Idac Is A Usace Alternative Early Contractor Involvement (eci) Delivery Method That Requires Extensive Collaboration Between The Owner, Designer Of Record (dor), And Construction Manager / General Contractor. The A-e Collaboration Requirements Include Continuous Open Team Communication; Partnering; Willingness For The A-e To Incorporate Alternative Designs And Materials And Include Changes To Schedule; Phasing Plans; Specifications; Means And Methods Of Construction Throughout The Collaborative Design Progression Period That Takes Place During The Construction Contractor’s Preconstruction Phase Services. A Summary Of The Idac Delivery Method Is Attached To This Announcement. required Services May Include The Preparation Of Special Reports; Planning And Design Charrettes; Studies; Development Of Design Criteria For Performance Contracts; Design Of Construction; Documenting Basis Of Design; Developing, Updating, And Reconciling Construction Cost Estimates. The Task Orders May Include But Are Not Limited To Design Work Involving Site Investigation, Geotechnical Reports, Topographic Surveys, Preparation Of Contract Drawings, Technical Specifications, Design Analyses, Life Cycle Cost Analyses, And Continuous Real-time Computer Aided Cost Estimating And Cost Reconciliation With Third Party Estimates. Electronic Security System Design, Anti-terrorism/force Protection Design, Progressive Collapse, Seismic Design, Cyber Security, And Network Engineering May Be Required. Resiliency, Reliability, And Sustainability Will Be Important Considerations. total Building Commissioning, With A Perspective As Designer May Be Required. Construction Phase Services, Including Shop Drawing Review, Design During Construction, Site Visits, Etc., Could Be Included In Task Orders. Building Information Modeling (bim) Technologies, Cadd And Gis Deliverables May Be Required. Specific Requirements Will Be Determined Based Upon Project Requirements And Described In Each Task Order. Project Assignments Will Typically Require Performance In An Office Setting And On-site. the Kansas City District Is Soliciting Feedback From Industry As Part Of Our Market Research Efforts Associated With This Acquisition And Is Considering Various Acquisition Strategies To Deliver This Project And Requests Input From Industry. The Following Information Is Requested In This Sources Sought (ss) Announcement With A Limit Of Ten (10) Pages For Your Response: 1. Organization Name, Address, Email Address, Website Address, Telephone Number, Business Size (small Or Large), And Type Of Ownership For The Organization; Include Uei Number And Cage Code. 2. Firm's Interest In Providing An Sf330 On The Pending Solicitation Once Issued. 3. Experience: A. Evidence Of Capabilities To Perform Work Comparable To That Required For This Project (e.g. Design Of Medical Facilities And Ancillary Structures Providing A Wide Variety Of Patient Care Services, Design Of A Campus Requiring Phased Demolition And Phased Construction, Design Of Facilities Utilizing The Dva's Technical Information Library). B. Provide Three Recent Relevant/comparable Projects (not More Than Ten Years Old). Include The Project Name; Dollar Value Of The Project; Description Of The Key/salient Features Of The Project And Those That Demonstrate Similarity To The Work Required Under The Proposed Satoc; Identify The Contracting Office & The Customer/user (include Poc Information); And Identify/discuss The Acquisition Method (e.g., Sealed Bid, Best Value), Contract Type (e.g., Firm Fixed Price, Fixed Price Incentive Successive Targets [fpis], And Delivery Method (e.g., Integrated Design And Construction [idac],guaranteed Maximum Price [gmp], Design-bid-build, Design-build, Early Contractor Involvement [eci], Construction Manager As Constructor [cmc], Etc.). Responses Should Address The Firm's Capability To Construct A Hospital Or Medical Center Facility And The Challenges Associated With Large, Complex Medical Facilities. 4. Identify If, Based Upon The Scope Of This Project, You Would Form A Joint Venture To Execute This Work. Provide Joint Venture Information, If Applicable, Including Uei And Cage Code. 5. Provide The Firms Plan To Include Small Business Participation To The Maximum Extent Practicable. a Virtual Industry Day Is Planned For Thursday, December 19, 2024 At 1100 Cst. Webex Login Information Is Listed Below: 1. Join From The Meeting Link Below: https://usace1.webex.com/usace1/j.php?mtid=m5e4d4e7380c3b0f3d4796025d738aa1d 2. Join By Meeting Number Below: meeting Number (access Code): 2827 328 3747 meeting Password: N4ppp75cyc* 3. Join From A Mobile Device (attendees Only) +1-844-800-2712,,28273283747## Us Toll Free +1-669-234-1177,,28273283747## Us Toll 4. Join By Phone +1-669-234-1177 Us Toll +1-844-800-2712 Us Toll Free global Call-in Numbers | Toll-free Calling Restrictions 5. Join From A Video System Or Application dial 28273283747@usace1.webex.com you Can Also Dial 207.182.190.20 And Enter Your Meeting Number. please Send Your Sources Sought Responses Via Email To Ines.necker@usace.army.mil. Submissions Should Be Received By 11 A.m. Cst, January 6, 2025. this Synopsis Is For Market Research Purposes Only And Is Not A Request For An Sf330 Nor Does It Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Costs Incurred In Preparation Of A Response To This Notice.

Details: Public Notice Soq #25-005 Sala Avenue Historic District Drainage Feasibility Analysis And Improvements The Parish Of Jefferson, Authorized By Resolution No 145576. Is Hereby Soliciting A Statement Of Qualifications ((tec) Professional Services Questionnaire) For Persons Or Firms Interested And Qualified To Provide Professional Engineering Services For The Sala Avenue Historic District Drainage Feasibility Analysis And Improvements Project (council District 2). Deadline For Submissions: 3:30 P.m., January 23, 2025 General The Scope Of Work Associated With This Project Consists Of Streetscape And Drainage Improvements To The Sala Avenue Corridor Between River Road And 4th Street In The City Of Westwego. The Intention For The Project Is To Beautify And Improve The Drainage Of The Corridor For A 10-year Design Storm Utilizing Alternative Drainage Methods, Such As Green Infrastructure (bioswales, Permeable Pavement, Rain Gardens, Etc.). Jefferson Parish Anticipates The Project Will Require The Following Supplemental Services: Hydraulic Analysis, Geotechnical Services, Surveying, Landscape Architecture, And Resident Inspection. Compensation Compensation For The Required Design Services Will Be Made On An Hourly Rate Basis Or A Fixed Fee Basis, Or A Combination Of Both, Depending On Scope And Complexity Of The Work. The Parish Reserves The Right To Determine The Method Of Payment (hourly Or Fixed) For Each Individual Assignment. For Hourly Rate Work, The Firm Shall Be Compensated By The Appropriate Jefferson Parish Department On The Basis Of Their Certified And Itemized Burdened Rate In Accordance With Guidelines Established In Attachment “a” To The Standard Professional Services Agreement For Jefferson Parish. A Copy Of Attachment “a” May Be Obtained By Calling The Jefferson Parish Department Of Capital Projects At (504) 736-6833. For Fixed Fee Work, The Fee Shall Be Negotiated With The Firm By The Jefferson Parish Department Of Capital Projects And Shall Be Mutually Agreeable To Both Parties. Compensation For Supplemental Services, If Required, Shall Be In The Form Of A “lump Sum” Or Hourly Rate For Each Supplemental Service, Which Shall Be Mutually Agreeable To The Parish And The Consultant. All Costs Associated With This Project Shall Be Subject To Jefferson Parish Review And Approval. Minimum Requirements For Selection The Persons Or Firms Under Consideration Shall Have At Least One (1) Principal Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana. A Subcontractor May Not Be Used To Meet This Requirement. (section C. Of Tec Professional Services Questionnaire); The Persons Or Firms Under Consideration Shall Have A Professional In Charge Of The Project Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana With A Minimum Of Five (5) Years’ Experience. A Subcontractor May Not Be Used To Meet This Requirement. (section K. “professional In Charge Of Project:”; Of Tec Professional Services Questionnaire); The Persons Or Firms Under Consideration Shall Have One (1) Employee Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana In The Applicable Discipline Involved. A Subcontractor May Meet This Requirement Only If The Advertised Project Involves More Than One Discipline (section D. Of Tec Professional Services Questionnaire). With Regard To The Questionnaire, Principal Means The Sole Proprietor Of The Firm, Or One Who Shares An Ownership Interest With Other Persons In The Firm, Including But Not Limited To, A Partner In A Partnership, A Shareholder In A Corporation, Or A Member Of A Limited Liability Corporation. Evaluation Criteria The Following Criteria Will Be Used To Evaluate Each Firm Submitting A Statement Of Qualifications: 1) Professional Training And Experience In Relation To The Type And Magnitude Of Work Required For The Particular Project – (maximum Points Awarded Shall Be 35). 2) Size Of Firm, Considering The Number Of Professional And Support Personnel Required To Perform The Type Of Engineering Tasks, Including Project Evaluation, Project Design, Drafting Of Technical Plans, Development Of Technical Specifications And Construction Administration – (maximum Points Awarded Shall Be 10). 3) Capacity For Timely Completion Of Newly Assigned Work, Considering The Factors Of Type Of Engineering Task, Current Unfinished Workload, And Person Or Firm’s Available Professional And Support Personnel – (maximum Points Awarded Shall Be 20). 4) Past Performance On A Project In Which The Person Or Firm Assisted A Governmental Entity In Dealings With Disaster Recovery And Any Other Projects Relating To Cdbg – (respondent Should Provide A List Of Completed Disaster Recovery Projects And/or Similar Cdbg Projects For Which Firm Has Provided Verifiable References) (maximum Points Awarded Shall Be 10). 5) Location Of The Principal Office – Preference Shall Be Given To Persons Or Firms With A Principal Business Office As Follows: (a) Jefferson Parish, Including Municipalities Located Within Jefferson Parish (15 Points); (b) Neighboring Parishes Of The Greater New Orleans Metropolitan Region, Which Includes Orleans, Plaquemines, St. Bernard, St. Charles And St. Tammany Parishes (12 Points); (c) Parishes Other Than The Foregoing (10 Points); (d) Outside The State Of Louisiana (6 Points). Location Of The Principal Office Shall Only Factor Into The Evaluation Criteria If Adequate Competition (two Or More Firms That Are Responsive And Responsible) Are Located Within Jefferson Parish - (maximum Points Awarded Shall Be 15). 6) Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services, In Which The Parish Prevailed Or Any Ongoing Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services Excluding Those Instances Or Cases Where The Person Or Firm Was Added As An Indispensable Party, Or Where The Person Or Firm Participated In Or Assisted The Public Entity In Prosecution Of Its Claim. (in The Event That The Person Or Firm Fails To Provide Accurate And Detailed Information Regarding Legal Proceedings With The Parish, Including The Absence Of Legal Proceedings, The Person Or Firm Shall Be Deemed Unresponsive With Regard To This Category, And Zero (0) Points Shall Be Awarded) - (maximum Points Awarded Shall Be 15). 7) Prior Successful Completion Of Projects Of The Type And Nature Of Engineering Services, As Defined, For Which Firm Has Provided Verifiable References - (maximum Points Awarded Shall Be 5). Project Will Include Federal Disaster And Resiliency Funds And Therefore Will Include Associated Federal Requirements, Including Section 3, As Applicable. Statements Of Qualifications From Minority, Female-owned, And Local Firms / Individuals Are Invited. Each Firm’s Lowest And Highest Score Shall Be Dropped And Not Count Towards The Firm’s Score. Only Those Persons Or Firms Receiving An Overall Cumulative Score Of At Least Seventy (70) Percent Or Greater, Of The Total Possible Points For All Categories To Be Assigned By The Participating Technical Evaluation Committee Members, Shall Be Deemed Qualified To Perform These Professional Services. The Person Or Firm Submitting A Statement Of Qualification ((tec) Professional Services Questionnaire) Must Identify All Subcontractors Who Will Assist In Providing Professional Services For The Project, In The Professional Services Questionnaire. Each Subcontractor Shall Be Required To Submit A ((tec) Professional Services Questionnaire) And All Documents And Information Included In The Questionnaire. (refer To Jefferson Parish Code Ordinance, Section 2-928) All Persons Or Firms (including Subcontractors) Must Submit A Statement Of Qualifications ((tec) Professional Services Questionnaire) By The Deadline. The Latest Professional Services Questionnaire May Be Obtained By Contacting The Purchasing Department At (504) 364-2678 Or Via The Jefferson Parish Website At Https://www.jeffparish.gov/27/government. This Questionnaire Can Be Accessed By Clicking On The + Next To “doing Business In Jefferson Parish” On The Website And Clicking On “professional Services Questionnaires”. Submissions Will Only Be Accepted Electronically Via Jefferson Parish’s E-procurement Site, Central Bidding At Www.centralauctionhouse.com Or Www.jeffparishbids.net. Registration Is Required And Free For Jefferson Parish Vendors By Accessing The Following Link: Www.centralauctionhouse.com/registration.php. No Statements Will Be Accepted After The Deadline. Affidavits Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Insurances Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Disputes/protests Relating To The Decisions By The Evaluation Committee Or By The Jefferson Parish Council Shall Be Brought Before The 24th Judicial Court. Adv: The New Orleans Advocate: January 8, & 15, 2025

Details: Amendment 0004: amendment 0004 Is Issued To Extend The Sf 330 Submission Date Regarding N0016425r1025. amendment 0003: amendment 0003 Is Issued To Provide Answers To Industry Questions Received Thus Far Regarding N0016425r1025. amendment 0002: amendment 0002 Is Issued To Provide Answers To Industry Questions Received Thus Far Regarding N0016425r1025. amendment 0001: amendment 0001 Is Issued To Provide Answers To Industry Questions Received Thus Far Regarding N0016425r1025. original Posting: n0016425r1025 Indefinite Delivery/indefinite Quantity (idiq) Contract For Multi‐ Discipline Architect‐engineer (a‐e) Services In Support Of Naval Surface Warfare Center Crane Division (nswc Crane) Facilities Projects At Naval Support Activitys Crane (nsa Crane), Crane, Indiana And Lake Glendora Test Facility (lgtf), Sullivan In. description: All Information Needed For Interested Parties To Submit A Standard Form Sf 330, Architect Engineer Qualifications Is Contained Herein. There Is No Separate Request For Proposals (rfp) Package To Download. related Notices: N0016422snb83, N0016424snb55, N0016424r1025, N0016424snc12, N0016425snb08 background: the Naval Surface Warfare Center Crane Division (nswc Crane) Requires A-e Services In Support Of Various Projects At Nsa Crane And Lgtf. This Procurement Will Result In One Single-award Idiq Contract For Multi‐discipline A‐e Services For Planning, Design, Construction, Evaluation Of New Construction, And Renovation Projects. These Services Will Be Procured In Accordance With 40 United States Code (usc) Chapter 11, Selection Of Architects And Engineers, As Implemented By Federal Acquisition Regulation (far) Subpart 36.6. The Idiq Contract Will Be For A Five-year Ordering Period. This Is A Five-year Contract, With No Option Years. The Maximum Value For The Contract Term, Including All Awards, Shall Not Exceed $12,000,000. There Will Be No Minimum Dollar Limit Per Order And The Maximum Dollar Limit Per Order Will Be $5m In Compliance With The $9m Fy24 Ndaa Prescription. The Guaranteed Minimum For The Contract Ordering Period Is $5,000 And Will Be Satisfied By Simultaneous Award Of The Initial Task Order With The Basic Contract. Firm‐fixed Price Task Orders Will Be Negotiated At The Task Order Level. In Accordance With Dfars Subpart 236.6, The Contract Price Or The Estimated Cost And Fee For Production And Delivery Of Designs, Plans, Drawings, And Specifications Shall Not Exceed Ten (10) Percent Of The Estimated Construction Cost Of The Public Work Or Construction, Excluding Fees. there Will Be No Minimum Dollar Limits Per Task Order. The Estimated Award Date Is October 2025. this Proposed Contract Is Anticipated To Be A Full And Open Procurement. The North American Industry Classification System (naics) Code Is 541330, Engineering Services, And The Small Business Size Standard Is $25,500,000. The Product And Services Code (psc) Is C219 Architect And Engineering- General: Structural Engineering. The Government Seeks The Most Highly Qualified Firm To Perform The Required Services, Based On The Demonstrated Competence And Qualifications, In Accordance With The Selection Criteria Included Herein. comprehensive A‐e Services Are Required For The New Construction, Repair, Replacement, Demolition, Alteration, And/or Improvement Of Facility Projects. Projects May Include Single Or Multiple Disciplines, Such As: Structural, Civil, Mechanical, Electrical, Architectural, Planning, Environmental, Fire Protection, Cost Estimating, And/or Geotechnical. The Types Of Projects May Include: Building Renovations; Building Additions; Site Work Required To Support New Work; New Construction; Parking Areas; Foundations; Retaining Walls; Failure Investigation Including Destructive And Non‐destructive Testing; Seismic Evaluation And Design; Progressive Collapse Analysis; Blast Resistant Design; Structural Engineering Investigations; Utility Systems Including sanitary And Storm; Water Systems; Electrical Power Systems, Storm Water Management; Surveying; Pavement Design; And Civil Engineering Studies. the Selected Offeror Will Be Solely Responsible For The Designs Produced On The Resulting Task Order Contracts And Will Be Recorded As The Designer Of Record. The Successful Offeror Shall Also Be Accountable And Responsible For Contributions To Design-build Rfp Preparation And All Other Requirement Submittals To The Government. in Accordance With Far 36.604 And The Supplements Thereto, And Upon Final Acceptance Or Termination, All Task Orders Above $35,000 Will Receive A Performance Evaluation. A Performance Evaluation May Be Prepared For Lesser Task Orders And Interim Performance Evaluations May Be Prepared At Any Time. Performance Evaluations Will Be Maintained For Use In Future Source Selections For Architect-engineer Services. performance Location(s): crane, Indiana sullivan, Indiana requirements: for Complete Details On This Requirement See Attachment 1, “statement Of Work (sow).” Specific Types Of A‐e Services That May Be Required Under This Contract Include: facility Planning And Project Development: Services May Include Work Such As The Following: Prepare Master Plans, Project/site Plans For Proposed Facility/infrastructure Projects. Facility Planning May Be Requested For Renovation, Addition, Repair And New Construction Projects. development Of Design‐bid‐build (dbb) Packages: Services May Include Preparation Of Drawings And Specifications For Renovation, Addition, Repair Or New Construction Projects. Design Meetings With The Government May Be Required In Order To Agree On Design Solution(s) That Meet The Government’s Project Requirements. Electronic Document Delivery Details Will Be Specified At The Order Level. Electronic Delivery Shall Include Both .pdf And .dwg Formats. development Of Design‐build (db) Request For Proposal (rfp) Packages: Services May Include Working With A Construction Manager As Part Of A Design-build Team To Prepare Drawings And Specifications For Renovation, Additions, Repair Or New Construction Projects. Design Meetings With The Government May Be Required In Order To Agree On Design-build Solution(s) That Meet The Government’s Project Requirements. Electronic Document Delivery Details Will Be Specified At The Order Level. Electronic Delivery Shall Be Include Both .pdf And .dwg Formats. preparation Of Cost Estimates Using Unit Guidance, Parametric Methodologies, And Detailed Cost Estimating: Services May Include Preparing Cost Estimates To Include Rough Order Of Magnitude Through Construction Working Estimates For Renovation, Addition, Repair And/or New Construction Projects Based On Prepared Design Documents, As Called Out In The Task Order. development Of Alternatives And Economic Analysis: Service May Include Providing Alternate Design Solutions And Associated Economic Impacts For Renovation, Addition, Repair Or New Construction Projects. condition Assessment: Services May Include Performing Studies Of Existing Buildings And/or Components Of Buildings To Validate Existing Conditions That May Then Be Used To Inform Future Proposed Design Solutions. Site Visits May Be Required To Document Existing Facility/infrastructure Conditions. field Investigations (including Utility And Geotechnical): Services May Include Conducting Field Surveys/investigations Of Existing Sites, Buildings Or Specific Components Of A Building (i.e., Hvac Or Electrical Systems) In Order To Document Current Status Of A Facility’s Infrastructure. The Results Of Any Field Investigations May Then Be Used To Assist With The Preparation Of Design Documents For A Particular Project. surveying And Mapping: Services May Include Surveying And/or Mapping Of Existing Or Proposed Sites For A New Construction Project Or Building Addition. Survey Work May Be Required In Order To Document Existing Site Conditions To Support Site/civil Design Solutions. preparation Of Engineering Evaluations: Services May Include Performing Engineering Calculations To Support Civil, Mechanical, Electrical, Plumbing Or Fire Protection Design Solutions. incorporation Of Sustainable Engineering Design Practices: Services May Include Incorporation Of Design Principles For Renovation, Addition, Repair And/or New Construction Projects To Support Sustainable Design Solutions And/or Leadership In Energy And Environmental Design (leed) Certification. consultations: Services May Include Collaborating With Other Specialty Design Professionals To Offer And Propose Design Solutions Required To Respond To Unique Project Requirements. energy Computations: Services May Include Preparation Of Energy Calculations To Verify Proposed Design Solutions Comply With Required Building Codes, Federal, State And/or Local Energy Requirements. geotechnical Investigations: Services May Include Conducting Soil Boring Testing In Order To Identify Minimum Design Requirements For New Construction Projects Or Building Additions. obtaining Permits And Regulatory Approvals: Services May Include Submitting Design Documents To Local, State And/or Federal Jurisdictions For Review And Approval Prior To Proceeding With Renovation/construction Work. environmental Investigation And Consultation: Services May Include Providing Design Services Required To Meet Environmental/epa Regulations On Facility/infrastructure Projects And Providing Consultation(s)/collaboration With The Government To Discuss Acceptable Environmental Design Alternatives And Solutions. review Of Construction Contractor Submittals: Services May Include Review Of Project Submittals (such As Product Data Or Product Samples) In Order To Validate Proposed Materials/products Comply With Design Drawings And/or Specifications. field Consultation And Inspection During Construction: Services May Include Responding To Contractor Requests For Information (rfis) During Construction In Order To Address Design Questions That May Arise During Construction/renovation Projects. commissioning: Services May Include Supporting The Commissioning Process By Attending Commissioning Meetings In Order To Validate Engineered Design Solutions Are Incorporated Into The Project In Accordance With Design Specifications. operation And Maintenance Support Information (omsi): Services May Include Providing The Government With O&m Documentation And Training, Where Applicable, Based On The Final Design Solution And Construction. Electronic Document Delivery Details Shall Be Included With Each Order. Electronic Delivery Shall Include Both .pdf And .dwg Formats. as‐built Drawing Preparation: Services May Include Updating Design Documents Including Drawings And Specifications To Accurately Reflect Construction Field Changes And Document Final As-built Construction/renovation Projects. Electronic Document Delivery Details Shall Be Included With Each Order. Electronic Delivery Shall Include Both .pdf And .dwg Formats functional Analysis Concept Development (facd)/design Charrette/other Design And Construction Related Workshops And Meetings: Contractor Shall Attend Design Meetings To Collaborate With Government Representatives To Consider Design Options And Build Consensus Regarding Preferred Design Solution(s). Contractor Shall Provide Meeting Minutes (cdrl A005). document Deliverable Requirements: cdrl did Number did Title did Description/scope deliverable Schedule a001 di-misc-80508b technical Report - Study/services studies And Specifications at Milestone/ Asreq a002 di-fncl-81116 Not 2 manhour Estimate, Technical Cost Proposals manpower And Cost Estimate To Implement The Statement Of Work (sow) at Milestone a003 di-mgmt-80061a Not 2 engineering And Technical Services Accomplishment Report production Report weekly a004 di-misc-81274 Not 2 environmental Permits outlines Submittal Procedures To Be Applied To All Permits asreq a005 di-admn-81250c meeting Minutes meeting Minutes 2 Days After Meeting a006 di-mgmt-81597 personnel Resumes contractor’s Personnel Roster With Relevant Qualifications And Certifications post Award Kickoff a007 di-mgmt-80507 project Planning Chart schedule post Award Kick Off a008 di-admn-81249c meeting Agenda meeting Agenda 1 Day Before Meeting a009 di-facr-82278 installation Design Package designs And Drawings asreq other Special Considerations: as Defined By Paragraph 1‐5 Of United Facilities Criteria (ufc) 3‐ 600‐01, Fire Protection Engineering For Facilities, This Contract Requires The Services Of A Licensed Fire Protection Engineer Or Consultant. asbestos And/or Lead‐based Paint Assessments May Be Required On This Contract To Determine The Presence Of Hazardous Material During Removals/demolition Or At Utility Points Of Connections. Work On And Around Waterfront Structures, Including Under Deck And Underwater, And Work In Confined Spaces May Be Required On This Contract. A‐e Firms Must Be Able To Accept Work That Involves Asbestos, Lead Paint, Poly‐chlorinated Biphenyls (pcbs), And Other Hazardous Materials, Work On And Under Waterfront Structures, And In Confined Spaces. all Engineering And Design Services Shall Comply With The Most Current Edition Of Facilities Criteria (fc) 1‐300‐09n Design Procedures, And Other Requirements As Indicated On The Whole Building Design Guide (wbdg) Web Site (www.wbdg.org). The Selected A-e Contractor Shall Have Online Access To Web‐based Support Programs Capable Of Creating Auto-cad Documents For Government Review, And Email Via The Internet For Routine Exchange Of Correspondence. The Selected A-e Contractor Shall Submit And Maintain An A‐e Accident Prevention Plan (app) In Accordance With U.s. Army Corp Of Engineers (usace) Em 385‐1‐1 For Each Project On This Contract And Activity Hazard Analysis (aha) For Each In‐field Action. Key Personnel, Including Consultants, Must Be U.s. Citizens. a‐e Firms Are Advised That The Selected Firm, Its Subsidiaries Or Affiliates, And Its Consultants Which Design, Prepare, Or Provide Engineering Services In Support Of Construction Contract Documents Cannot Provide Construction Services For The Same Contract. This Includes Concept Design, Preparation Of Project Programming Documents (dd Form 1391), Facility Siting Studies, Environmental Assessments, Geotechnical Services, Engineering Studies And Services, Design‐build Request For Proposals (rfps), Or Other Activities That Result In Identification Of Project Scope And Cost. The Awarded Contract Will Be Subject To Specific Provisions Addressing The Avoidance Of Organizational Conflicts Of Interest, Including H-209-h003, Required Disclosure Of Organizational Conflict Of Interest (navsea) (nov 2022). The Prime Firm For This Contract Will Be Required To Perform Throughout The Contract Term. in Accordance With Far 19.702, Each Solicitation Of Offers To Perform A Contract That Is Expected To Exceed $750,000 ($1.5 Million For Construction) And That Has Subcontracting Possibilities, Shall Require The Apparently Successful Offeror To Submit An Acceptable Small Business Subcontracting Plan. If The Apparently Successful Offeror Fails To Negotiate A Subcontracting Plan Acceptable To The Contracting Officer Within The Time Limit Prescribed By The Contracting Officer, The Offeror Will Be Ineligible For Award. submission Requirements: submission Requirements - Sf 330 Part I typed, 12 Point Times New Roman, Shall Not Exceed 100 Single‐sided 8.5 By 11 Inch Pages criterion criterion Title criterion Requirements criterion 1 specialized Experience sf 330, Part I, Section F - Minimum Of Three (3) And Maximum Of Five (5) Projects Completed (project Completion To Be Defined As Receiving Final Design Acceptance From Client) Within The Past Seven (7) Years criterion 2 professional Qualifications And Technical Competence sf 330, Part I, Section E – Resumes For All Proposed Key Personnel That Illustrate Experience In The Type Of Work Proposed Under This Contract. Resumes Are Limited To Three Pages And Should Indicate: Professional Registration, Certification, Licensure And/or Accreditation In Appropriate Disciplines; Cite Recent (within The Past 10 Years) Project‐specific Experience In Work Relevant To The Services Required Under This Contract; And Indicate Proposed Role In This Contract. Indicate Participation Of Key Personnel In Example Projects In The Sf 330, Part I, Section G. criterion 3 past Performance submit A Completed Cpars/acass/ppq Evaluation For Each Project Under Criterion 1 criterion 4 quality Control describe The Quality Control Program That Will Be Utilized For All Deliverables Of This Contract And The Management Approach For Quality Control Processes And Procedures. criterion 5 program Management And Capacity 1. Provide An Organizational Chart For The Team And Discuss The Management Plan For This Contract And Personnel Roles In The Organization. Include Small Business Participation Specifics. 2. Describe The Firm’s Present Workload And The Availability Of The Project Team (including Consultants) For The Specified Contract Performance Period. 3. Describe The Firm’s Ability To Sustain The Loss Of Key Personnel While Accomplishing Work Within Required Time Limits, To Ensure Continuity Of Services And Ability To Meet Surges In Unexpected Project Demands And Ability To Adhere To Schedules And Budgets. criterion 6 knowledge Of General Geographic Area 1. Indicate Location Of The Office(s) That Will Be Performing The Work, Including Main Offices, Branch Offices, And Offices Of Team Members. 2. Provide A Narrative Describing The Team’s Knowledge And Previous Experience Of The Primary Geographic Areas To Be Covered By This Contract. 3. Provide A Narrative To Describe The Team’s Ability To Provide Timely Response To Requests For On‐site Support. criterion 7 volume Of Work firms Shall Not Submit Data For This Factor. a‐e Firms Desiring To Be Considered For This Contract Shall Submit A Completed Sf 330 Package By Dod Safe To The Contracting Officer And The Contract Specialist. The Sf 330 Shall Be Typed, 12 Point Times New Roman. Part I Shall Not Exceed 100 Single‐sided 8.5 By 11 Inch Pages (the 100 Page Limit Does Not Include The First Eight (8) Instructional Pages Of The Sf 330, Individual Subcontracting Reports (isrs), The Small Business Subcontracting Plan Or Certificates/licenses, Nor Does The Page Limit Include Cover Sheets Or Dividers, Provided That These Do Not Contain Any Substantive Information Submitted In Response To The Synopsis Or Intended To Demonstrate The Qualifications Of The Firm). Part I Pages Shall Be Numbered Sequentially. Introductions Shall Be Included In Sections E And F. A-e Firm Submissions Shall Include Its Unique Entity Identifier (uei), Commercial And Government Entity (cage), And Taxpayer Identification Number (tin) Numbers In Block 30 Of The Sf 330. submissions To This Proposal Announcement Must Be Submitted Electronically Through Dod Safe. No Paper Copies, Email, Cd-roms Or Facsimile Submissions Will Be Accepted. Electronic Proposal Submission Is Required Through The Army’s Electronic File Sharing Service, Dod Safe (https://safe.apps.mil). The Dod Safe Application Is Used To Send Large Files To Individuals That Would Normally Be Too Large To Send Via Email. There Are No User Accounts For Dod Safe. Authentication Is Handled Via Email. anyone Has Access To Dod Safe And The Application Is Available For Use By Anyone. The Dod Safe “getting Started Guide” Has Information On How To Utilize The System (https://safe.apps.mil/about.php). Instructions For Uploading Are As Follows: send An Email To The Contracting Officer And Contract Specialist To Receive The Link To Drop Off Your Proposal. This Will Need To Be Completed Five (5) Business Days Prior To The Proposal Due Date. contract Specialist, Aaron Hohl, Aaron.m.hohl.civ@us.navy.mil contracting Officer, Jared Myers, Jared.s.myers3.civ@us.navy.mil . you Will Receive An Email With The Link To Submit Your Drop Off. The Link Will Be Provided No Later Than Two (2) Business Days Prior To The Proposal Due Date. short Note To The Recipients: Click The Add Files Or Drag And Drop Your Files. For File Description, Enter N0016425r1025-firmname. click Upload Button To Send Documents. guest Users Will Need To Check Their Email To Verify Their Email Address Before The Recipients Will Be Notified. (government-issued Common Access Cards (cacs) Are Not Required). file Size Limitations: Offerors Are Advised To Follow The Dod Safe Instruction For Uploading Files. Dod Safe Supports Delivery Up To 8gb. If Needed, Offerors Are Advised To Break The Files Down To Smaller Sections In Order To Upload It To The System. In Such Cases, Please Divide The Sections As Logically As Possible And Be Sure To Clearly Name The Files As Specified Below. file Naming Convention: To Ensure Your Submission Is Received And Processed Appropriately, It Is Important That Interested Parties Carefully Ensure Their Electronic Files Adhere To The Following Naming Convention: xxx- Firmname- Volume I xxx- Firmname- Volume Ii each File Name Shall Begin With The Solicitation Number Followed By The Firm’s Name And A Brief File Description. Please See Examples Above. file Organization: Although Hard Copies Are Not Accepted, Each File Shall Be Clearly Indexed, And Logically Assembled. Font Size Shall Be 12 Or Larger. Pages Shall Be Letter Sized (larger Page Sizes (such As 11x17 Foldouts, Etc.) Will Be Counted As One Page. Proposals Shall Be In Narrative Format, Organized, And Titled So That Each Section Of The Proposal Follows The Order And Format Of The Criterion. Information Presented Should Be Organized So As To Pertain To Only The Evaluation Factor In The Section That The Information Is Presented. Information Pertaining To More Than One Evaluation Factor Should Be Repeated In Each Section For Each Factor. upload Completion And Deadline: Interested Offerors Shall Submit Proposals No Later Than The Date And Time Specified In This Synopsis. The Time And Date Of The Proposal Receipt Will Be Upload Completion/delivery Time And Date Recorded Within Dod Safe Site. Do Not Assume That Electronic Submission Will Occur Instantaneously. Large Files (e.g. 10mb Or More) Will Take Some Time To Upload. Offerors Should Time Their Upload Effort With Prudence By Not Waiting Until The Last Few Minutes- This Will Allow For Unexpected Delays In The Transmittal Process. Offerors Are Encouraged To Keep A Copy Of The Upload Confirmation For Their Record. Submissions After The Deadline Will Be Considered Late And Will Be Processed In Accordance With Far 15.208. electronic Files: Files Shall Be In Their Native Format (i.e .,.docx, .xlsx, .ppt, Etc.), Or If In .pdf Format, Shall Be In Searchable Text. Text And Graphics Portfolios Of The Electronic Copies Shall Be In A Format Readable By Microsoft Office Or Adobe Applications. Data Submitted In A Spreadsheet Format Shall Be Readable By Ms Excel (all Cells And Formulars Shall Be Unlocked). all Contractors Are Advised That Registration In System For Award Management (sam) Database Is Required Prior To Award Of A Contract. Failure To Register In The Sam Database May Render Your Firm Ineligible For Award. For More Information, Check The Sam Web Site: Https://www.sam.gov. the Technical Data Package May Contain Information That Is Export Controlled. Only Those Companies That Have Completed Dd Form 2345 And Are Certified Under The Joint Certification Program (jcp) In An Active Status Are Authorized To Receive Export Controlled Information. Only Jcp Certified Firms Will Be Eligible For Any Future Award Made Related To This Effort. Additional Information About Jcp Is Available At Https://www.dla.mil/hq/logisticsoperations/services/jcp/. offerors Shall Restrict The Disclosure Or Use Of Its Proposal, (and) A Proper Legend Must Be Included On Materials Provided. Individual Subcontractor/vendor Proprietary Information May Be Submitted Separately. In Addition, If Proposal Volumes Include Technical Requirements That Have Been Identified As Cui, The Markings Shall Apply To The Technical Information Included In The Technical Volume. offeror Shall Mark Proposal Documents As Cui In Accordance With Nist Sp 800-171. Possible Categories For Use Include But Are Not Limited To The Following: cui Category: General Proprietary Business Information https://www.archives.gov/cui/registry/category-detail/proprietary-business-info.html#authority-list banner Marking For Specified Authorities: Cui//sp-propin banner Marking For Basic Authorities: Cui category Description: material And Information Relating To, Or Associated With, A Company's Products, Business, Or Activities, Including But Not Limited To Financial Information; Data Or Statements; Trade Secrets; Product Research And Development; Existing And Future Product Designs And Performance Specifications. *at A Minimum Technical Proposals Shall Safeguard In Accordance With Markings And Distributions Statements On All Technical Documents Within The Solicitation (sow, Specification, Drawings, Etc.). cui Category: Controlled Technical Information* https://www.archives.gov/cui/registry/category-detail/controlled-technical-info.html#authority-list banner Marking: Cui//sp-cti category Description: controlled Technical Information Means Technical Information With Military Or Space Application That Is Subject To Controls On The Access, Use, Reproduction, Modification, Performance, Display, Release, Disclosure, Or Dissemination. Controlled Technical Information Is To Be Marked With One Of The Distribution Statements B Through F, In Accordance With Department Of Defense Instruction 5230.24, "distribution Statements Of Technical Documents." The Term Does Not Include Information That Is Lawfully Publicly Available Without Restrictions. "technical Information" Means Technical Data Or Computer Software, As Those Terms Are Defined In Defense Federal Acquisition Regulation Supplement Clause 252.227-7013, "rights In Technical Data - Noncommercial Items" (48 Cfr 252.227-7013). Examples Of Technical Information Include Research And Engineering Data, Engineering Drawings, And Associated Lists, Specifications, Standards, Process Sheets, Manuals, Technical Reports, Technical Orders, Catalog-item Identifications, Data Sets, Studies And Analyses And Related Information, And Computer Software Executable Code And Source Code. category Marking: cti *at A Minimum Technical Proposals Shall Safeguard In Accordance With Markings And Distributions Statements On All Technical Documents Within The Solicitation (sow, Specification, Drawings, Etc.). cui Category: General Procurement And Acquisition https://www.archives.gov/cui/registry/category-detail/procurement-acquisition.html#authority-list banner Marking: Cui//sp-procure category Description: material And Information Relating To, Or Associated With, The Acquisition And Procurement Of Goods And Services, Including But Not Limited To, Cost Or Pricing Data, Contract Information, Indirect Costs And Direct Labor Rates. category Marking: procure cui Category: Source Selection https://www.archives.gov/cui/registry/category-detail/source-selection banner Marking For Specified Authorities: Cui//sp-ssel banner Marking For Basic Authorities: Cui category Description: per Far 2.101: Any Of The Following Information That Is Prepared For Use By An Agency For The Purpose Of Evaluating A Bid Or Proposal To Enter Into An Agency Procurement Contract, If That Information Has Not Been Previously Made Available To The Public Or Disclosed Publicly: (items 1-10). category Marking: ssel each Volume Submitted Shall Be Properly Marked With At A Minimum Ssel As Follows: a Cover Page Including The “cui” Marking In The Header And Footer As Required, As Well As The Requiredcui Designator Block If The Volume Contains Cui. This Designator Block Shall Be Included At The Bottom Right Portion Of The Cover Page And Read As Follows: controlled By: Department Of The Navy controlled By: Nswc Crane Code 02 cui Category: Propin/cti/procure/ssel distribution/dissemination Control: Fedcon poc: Nswccr 0253 Branch Head all Subsequent Pages Of The Document Shall Include The “cui” Marking In The Header And Footer. If Other Information Is Included In The Header Or Footer, The "cui" Marking Shall Be Centered On Its Own Line Within The Header And Footer. in Accordance With The Federal Acquisition Regulations (far) 36.601-4(b), The A-e Firm Must Be A Professional A-e Firm Permitted By Law To Practice The Professions Of Architecture Or Engineering In The State Of Indiana. This Requirement Can Be Achieved By Providing The Firm’s Indiana Secretary Of State Registration, And Currently Employing At Least Two (2) State Of Indiana Registered A-e Professionals. A-e Firms Shall Provide Proof That The Firm Is Permitted By Law To Practice The Professions Of Architecture Or Engineering In Indiana (e.g., Indiana Secretary Of State Registration And Employee’s State Of Indiana Professional Engineering License With Stamp Or State Of Indiana Registered Architect License With Stamp). Failure To Submit The Required Proof Will Result In A Firm’s Elimination From Consideration. all Businesses Intending To Conduct Business In Indiana, Except Sole Proprietors And General Partnerships, Must Register With The Indiana Secretary Of State. If A Business Needs To Be Registered, Please Do So At Www.inbiz.in.gov. jv Offerors Must Ensure That Both Entities Are Either State Registered Individually In Accordance With The Information Above, Or State Registered As A Jv In Accordance With The Information Above. only Those Companies That Have Completed Dd Form 2345 And Are Certified Under The Joint Certification Program (jcp) In An Active Status Are Authorized To Receive Export-controlled Information. Only Jcp Certified Firms Will Be Eligible For Any Future Award Made Related To This Effort. please Provide A-e Professional Licensure Proof Within Sf 330, Part I, Section E. Please Provide Secretary Of State Registration Information Within Sf 330, Part I, Section H. please Provide Jcp Registration Specifics Within Sf 330, Part I, Section E. Include Jcp Certification Number, Jcp Status, And Jcp Expiration Date. If Currently Working To Acquire Jcp Certification, You May Provide A Brief Explanation Of Your Firm’s Progress Towards Certification. However, Only Actively Jcp Certified Firms Will Be Eligible For Award. Jcp Active Status Will Be Confirmed Via Https://www.public.dacs.dla.mil/jcp/ext/ On The Day Of Proposal Submission. firms Must Also Acknowledge All Amendments To The Solicitation Within Their Proposal. A Statement Of Amendment Acknowledgement Within Sf 330, Part I, Section H Will Suffice. Please Address Individual Amendments Along With Corresponding Date Of Issuance On Sam.gov With Your Proposal. A Signed Copy Of The Amendments Is Not Required. if An Sf 254/sf 255 Is Submitted For This Request, It Will Not Be Reviewed Or Considered. As Required Above, Provide Verifiable Evidence That Your Firm Is Permitted By Law To Practice The Professions Of Architecture Or Engineering (e.g., State Registration Number). interested Firms Shall Submit Proposals To Both The Contract Specialist And The Contracting Officer Via Dod Safe. sf 330 Submissions Are Due No Later Than 9 January 2025 At 12:00 Pm (est). Late Responses Will Be Handled In Accordance With Federal Acquisition Regulations (far) 52.215‐1. The Points Of Contact For This Acquisition Are Contract Specialist, Aaron Hohl, At Aaron.m.hohl.civ@us.navy.mil And Jared Myers, Contracting Officer, At Jared.s.myers3.civ@us.navy.mil. inquiries Concerning This Procurement Should Reference The Solicitation Number (n0016425r1025) And Title And Be Forwarded Via Email To The Points Of Contact Identified Above. Questions Pertaining To This Requirement Are Due No Later Than Fourteen (14) Days After Posting Of This Requirement In Sam.gov. list Of Attachments: statement Of Work (sow) cdrls past Performance Questionnaire (ppq) key Personnel Criteria dd 254 selection Criteria: firms Responding To This Special Notice Will Be Evaluated To Determine The Most Highly Qualified Firms To Perform The Required Services In Accordance With The Published Selection Criteria. failure To Comply With Instructions Or Provide Complete Information May Affect The Firm’s Evaluation Or Disqualify The Firm From Further Consideration. Evaluation Criteria (1) Through (4) Are Considered Most Important And Are Equal Among Themselves; Criteria (5) Through (6) Are Less Important And Are Equal Among Themselves; Criteria (7) Will Only Be Used As A Tie‐breaker Among Technically Equal Firms. Specific Selection Criteria Include: specialized Experience professional Qualifications And Technical Competence past Performance quality Control program Management And Capacity knowledge Of General Geographic Area volume Of Work (no Data Submission Required) criterion 1 —specialized Experience (sf 330, Part I, Section F): firms Will Be Evaluated On Specialized Experience In Performance Of Services Similar To Those Anticipated Under This Contract Through Evaluation Of Experience In: infrastructure/facility Design Utilizing The Following Criteria, Including, But Not Limited To, Unified Facilities Criteria (ufcs) And Military Standard (milstd); conducting On‐site Design Development Workshops, Charrettes, Functional Analysis, Schematic Design, Or Space Programming, Including Supporting Budgetary Or Parametric Cost Estimating; demonstrated Ability To Design To Project Budget And Schedule; experience Preparing Design‐bid‐build; experience Preparing Design‐build Rfp Packages; And designing Projects In Accordance With Dod, Navy, Or Other Government Agencies’ Criteria. use Of Specsintact For Package Generation And Submittal To The Government specialized Design Experience To Include Antiterrorism Force Protection (atfp), Seismic Design And Analysis, And Design Of Secure Spaces firms May Be Considered More Favorably Under Criterion 1 By Demonstrating The Following: demonstrated Experience On Military Bases Within The Primary Geographic Area Of The Contract. experience In The Delivery Of Multiple Types Of A‐e Services Identified In The Requirements Above. experience On Multiple Facility Types, Such As Business, Educational, Industrial, Assembly, Health Care, Residential, Storage, Laboratory, And Mixed-use Occupancies, Identified In The Requirements Above. demonstrated Experience Using Rsmeans-based (or Equal) Electronic Cost Estimating Software. demonstrated Experience Designing Modifications To Existing Structures And Developing Construction Phasing While Associated Facilities Are Required To Remain In Service. demonstrated Experience Specific To Navy Facility Projects, Illustrating The Capability Of The A‐e Firm And Individual Design Team Members (a‐e Staff, Key Personnel, Consultants) To Work Within The Navy Project Planning Process Including: dd Form 1391 Development In The Navy’s Electronic Procurement Generator (epg), dd Form 1391 Validation Procedures Including Cost Validation. demonstrated Understanding Of Procedures And Timely Submission Of Base Access Documents In Adherence With Security, Safety, Environmental, And Accident Prevention Regulations In Order To Support A‐e Activities And Maintain Project Schedules. experience Of A‐e Firm And Individual Design Team Members (a‐e Staff, Key Personnel, Sub‐ Consultants) With Facilities Located In Historic Areas That Will Require Consultation With State Historic Preservation Officer (shpo) Throughout The Design Process. criterion 1 Submission Requirements: provide Up To A Minimum Of Three (3) And Maximum Of Five (5) Projects Completed (project Completion To Be Defined As Receiving Final Design Acceptance From Client) Within The Past Seven (7) Years Immediately Preceding The Date Of Issuance Of This Notice That Best Demonstrate Specialized Experience Of The Proposed Team In The Areas Outlined Above. Sufficient Information To Determine The Date Of Completion Of The Project Must Be Included In The Project Description Or The Project Will Not Be Considered. If More Than The Maximum Number Of Projects Is Submitted, The Government Will Only Evaluate Projects Up To The Maximum Number Authorized In The Order Submitted. all Projects Provided In The Sf 330 Must Be Completed By The Actual Office/branch/regional Office/ Individual Team Member Proposed To Manage And Perform Work Under This Contract. Projects Not Meeting This Requirement Will Be Excluded From Consideration In The Evaluation. To Enable Verification, Firms Should Include The Uei And Cage Along With Each Firm Name In The Sf 330 Part I, Section F, Block 25, “firm Name.” Include A Contract Number Or Project Identification Number In Block 21. Include An E‐mail Address And Phone Number For The Point Of Contact In Block 23(c). In Block 24, Include In The Project Description The Contract Period Of Performance, Award Contract Value, Current Contract Value, And A Summary Of The Work Performed That Demonstrates Relevance To Specialized Experience As Outlined Above. For Projects Performed As A Sub-contractor Or A Joint Venture Involving Different Partners, Specifically Indicate The Value Of The Work Performed As A Subcontractor Or By Those Firms Proposed For This Contract, And Identify The Specific Roles And Responsibilities Performed As A Sub-contractor Or By Those Firms On The Project Rather Than The Work Performed On The Project As A Whole. If The Project Description Does Not Clearly Delineate The Work Performed By The Entity/entities Offering/teaming On This Contract, The Firm Will Be Eliminated From Award Consideration. note: If The Firm Is A Joint Venture, Projects Performed By The Joint Venture Should Be Submitted; However, If There Are No Projects Performed By The Joint Venture, Projects Must Be Submitted For Each Joint Venture Partner, Not To Exceed A Total Of Five (5) Projects For Both Partners Combined. Each Partner Within A Jv May Not Be Responsible For More Than Three (3) Projects Within The Past Performance Submission. Firms Failing To Provide Projects From All Joint Venture Partners Will Be Considered To Have Not Met The Requirements Of The Criterion. projects Shall Be Submitted On The Sf 330 At Part I, Section F And Shall Be Completed Projects. Projects Not Completed Will Be Excluded From Evaluation Consideration. For Submittal Purposes, A Task Order On An Idiq Contract Is Considered A Project, As Is A Stand‐alone Contract Award. Do Not Submit An Idiq Base Contract As An Example Project. Instead, List Relevant Task Orders Or Stand‐ Alone Contract Awards That Fit Within The Definition Above. The Government Will Not Evaluate Information Provided For An Idiq Contract. Examples Of Project Work Submitted That Do Not Conform To This Requirement Will Not Be Evaluated. all Information For Criterion 1 Shall Be Submitted In The Sf 330, Part I, Section F. The Government Will Not Consider Information Submitted In Addition To Part I, Section F In The Evaluation Of Criterion 1. criterion 2—professional Qualifications And Technical Competence (sf 330, Part I, Sections E & G): films Will Be Evaluated On Professional Qualifications, Competence, And Experience Of The Proposed Key Personnel In Providing Services To Accomplish The Tasks Required Under This Contract, Including Participation In Example Projects In The Sf 330, Part I, Section G. Key Personnel Are Individuals Who Will Have Major Contract Or Project Management Responsibilities And/or Will Provide Unusual Or Unique Expertise. Specific Disciplines That Must Be Included In Key Personnel Are: project Manager, Registered Architect Or Professional Engineer, 10 Years quality Control Specialist, Architect Or Professional Engineer, 15 Years architect, Senior, Registered Architect, 15 Years architect, Junior, Registered Architect, 10 Years civil Engineer, Senior, Registered Professional Engineer, 15 Years civil Engineer, Junior, Registered Professional Engineer, 10 Years structural Engineer, Senior, Registered Professional Engineer, 15 Years structural Engineer, Junior, Registered Professional Engineer, 10 Years mechanical Engineer, Senior, Registered Professional Engineer, 15 Years mechanical Engineer, Junior, Registered Professional Engineer, 10 Years electrical Engineer, Senior, Registered Professional Engineer, 15 Years electrical Engineer, Junior, Registered Professional Engineer, 10 Years registered Communication Distribution Design (rcdd), 15 Years fire Protection Engineer, Registered Professional Engineer, 15 Years cost Estimator, Certified Cost Professional Or Equivalent, 15 Years key Personnel, Including Consultants, Shall Be U.s. Citizens. submissions Must Demonstrate Key Personnel Relevant Experience, Formal Education (e.g. Bachelor’s Or Master’s Degrees), And Relevant Professional Development Or Professional Certifications. See Key Personnel Attachment For Specific Qualification Criteria. If An Offeror Is Unable To Meet Key Personnel Requirement List In Its Entirety, The Government Still Urges A Response For Consideration Which Illustrates The Firm’s Maximum Personnel Capabilities. If Certain Key Personnel Roles Cannot Be Fulfilled, Please Indicate Those Role Vacancies Individually With A Course Of Action For Fulfillment. criteria 2 Submission Requirements: sf 330, Part I, Section E – Provide Resumes For All Proposed Key Personnel That Illustrate Experience In The Type Of Work Proposed Under This Contract. Resumes Are Limited To Three (3) Single-sided Pages And Should Indicate: Professional Registration, Certification, Licensure And/or Accreditation In Appropriate Disciplines To Include Document/licensure Numbers; Cite Recent (within The Past 10 Years) Project‐specific Experience In Work Relevant To The Services Required Under This Contract; And Indicate Proposed Role In This Contract. Indicate Participation Of Key Personnel In Example Projects In The Sf 330, Part I, Section G. The Firm Must Hold A Current And Active License In The State Of Indiana As Well As Currently Employ At Least Two (2) State Of Indiana Registered A-e Professionals. offeror Will Not Be Permitted To Simultaneously Fulfill Multiple Roles With An Individual On The Same Project. The Individuals Identified As Key Personnel On The Sf330 May Not Have Multiple Duties Or Be “dual-hatted.” Offerors Shall Provide Individual Resumes In Sf330 Section E For Each Of The Individuals Listed Above. criterion 3—past Performance (sf 330, Part I, Section H): firms Will Be Evaluated On Past Performance With Government Agencies And Private Industry In Terms Of Work Quality, Compliance With Schedules, Cost Control, And Stakeholder/customer Satisfaction. evaluating Past Performance And Experience Will Include Information Provided In The Contract performance Assessment Reporting System (cpars) / Architect-engineer Contract Administration Support System (acass) Or A Completed Past Performance Questionnaire (ppq) For Criterion 1 Projects And May Include Customer Inquiries, Government Databases, And Other Information Available To The Government Including Contacts With Points Of Contact In Other Criteria. Failure To Provide Requested Data, Accessible Points Of Contact, Or Valid Phone Numbers Could Result In A Firm Being Considered Less Qualified. criteria 3 Submission Requirements: submit A Completed Cpars/acass/ppq Evaluation For Each Project Under Criterion 1. firms May Provide Any Information On Problems Encountered And The Corrective Actions Taken On Projects Submitted Under Criterion 1—specialized Experience. Firms May Also Address Any Adverse Past Performance Issues. Information For Each Past Performance Submission Shall Not Exceed Five Single‐sided Pages In Total. offeror Shall Submit One (1) Past Performance Questionnaire Provided As An Attachment To This Synopsis To Each Of Its Customer Pocs Identified In Criterion 1 For Referenced Projects With No Cpars/acass Available. In Order To Expedite The Assessment Process, The Offeror May Complete The “contract Information” Portion Of The Past Performance Questionnaire For The Convenience Of The Customer Poc. A Ppq Submission Is Not Required For Criterion 1 Projects Accompanied By A Cpars/acass. However, A Ppq Submission For Every Criterion 1 Project, Including Those With A Cpars/acass Evaluation On Record, Would Assist The Government In Evaluation Accuracy And Is Encouraged. the Offeror Shall Not, However, Complete Any Other Section Of The Past Performance Questionnaire. The Questionnaire Shall Be Provided To The Customer Poc With Instructions To Complete And Submit It Directly To The Contracting Officer And/or The Point Of Contact Identified In This Announcement On Or Before The Proposal Due Date. Electronic Submission Via Encrypted E-mail By The Customer Is Required. under No Circumstances Shall The Questionnaires Be Returned To The Offerors After Completion. Any Information Provided By The Offeror’s References Is Subject To Verification/validation By The Government During The Evaluation Process. The Government May Make Contact And Follow Up With The Listed References Identified On The Contractor Past Performance Data Documents/data. The Offeror May Provide Information On Problems Encountered On The Identified Contracts As Well As The Offeror’s Corrective Actions. The Government Reserves The Right To Solicit Feedback Beyond What Is Identified In The Questionnaire. awards, Letters Of Commendation, Certificates Of Appreciation, Etc., Shall Not Be Submitted And Will Not Be Considered In The Evaluation. criterion 4—quality Control Program (sf 330, Part I, Section H): firms Will Be Evaluated On The Strength Of The Quality Control Program Proposed By The Firm To Ensure Quality Products And Services Under This Contract And Means Of Ensuring Quality Services From Their Consultants/subcontractors. criteria 4 Submission Requirements: describe The Quality Control Program That Will Be Utilized For All Deliverables Of This Contract And The Management Approach For Quality Control Processes And Procedures. The Description Shall: describe Specific Quality Control Processes And Procedures Proposed For This Contract To Achieve Technical Accuracy Of And Assurance Of Overall Coordination Of Plans And Specifications, And Engineering And Design Services. provide A Quality Control Process Chart Showing The Inter‐relationship Of The Management And Team Components. identify The Key Personnel (submitted Under Criterion 2—professional Qualifications And Technical Competence) Responsible For The Quality Control Program And A Description Of Their Roles And Responsibilities. describe How The Firm’s Quality Control Program Extends To Management Of Sub-contractors. explain The Quality Control Program Including An Example Of How The Plan Has Worked For One Of The Projects Submitted As Part Of Sf 330, Section F Or How The Plan Will Work If It Has Not Been Used Previously. criterion 5—program Management And Capacity (sf 330, Part I, Section H): firms Will Be Evaluated On The Firm’s Ability To Plan For And Manage Work Under The Contract And The Capacity To Accomplish The Work In The Required Time. criteria 5 Submission Requirements: provide An Organizational Chart For The Team And Discuss The Management Plan For This Contract And Personnel Roles In The Organization. Describe The Ability Of The Firm To Manage, Coordinate And Work Effectively With Team Members, Both Internal Staff, Sub- Contractors And Consultants. Discuss The History Of Working Relationships With Team Members, Including Joint Venture Partners Where Applicable. describe The Firm’s Present Workload And The Availability Of The Project Team (including Consultants) For The Specified Contract Performance Period. Describe The Workload/availability Of The Key Personnel During The Anticipated Contract Performance Period And The Ability Of The Firm To Provide Qualified Backup Staffing For Key Personnel To Ensure Continuity Of Services. General Statements Of Availability/capacity May Be Considered Less Favorably. describe The Firm’s Ability To Sustain The Loss Of Key Personnel While Accomplishing Work Within Required Time Limits, To Ensure Continuity Of Services And Ability To Meet Surges In Unexpected Project Demands And Ability To Adhere To Schedules And Budgets. include Small Business Subcontracting Plan Specifics Which Detail Level Of Participation Of Small Business, Small Disadvantaged Business, Woman-owned Small Business, Hubzone Small Business, Service-disabled Veteran-owned Small Business And Veteran Owned Small Business Team Members. attach A Small Business Subcontracting Plan Which Estimates The Proposed Extent Of Participation Of Small Business, Small Disadvantaged Business, Woman-owned Small Business, Hubzone Small Business, Service-disabled Veteran-owned Small Business And Veteran Owned Small Business Team Members In The Contract Team. Clearly Specify Each Small Business Firm That Is A Team Member, Their Small Business Category, And Their Proposed Level Of Participation Measured As A Percentage Of The Overall Estimated Effort. The Small Business Subcontracting Plan Draft Will Not Count Against The Total Page Count Limitation For The Firm’s Response. The Small Business Subcontracting Plan Should Be Included As An Attachment To The Sf 330 Response. Small Business Subcontracting Plan Specifics May Be Referenced Within The Sf 330 Response, But The Subcontracting Plan Should Also Be Attached In Its Entirety. criterion 6— Knowledge Of General Geographic Area (sf 330, Part I, Section H) firms Will Be Evaluated On The Locations Of Their Office Or Offices That Will Be Performing The Work Under This Contract And Demonstrated Knowledge Of The General Geographic Areas In Which Projects Could Be Located. Evaluation Of Firms Will Include Consideration Of Their Location Within The General Geographic Area Of The Anticipated Projects (primarily At Naval Surface Warfare Center Crane Division, Crane, In). criteria 6 Submission Requirements: indicate Location Of The Office(s) That Will Be Performing The Work, Including Main Offices, Branch Offices, And Offices Of Team Members. provide A Narrative Describing The Team’s Knowledge And Previous Experience Of The Primary Geographic Areas To Be Covered By This Contract. provide A Narrative To Describe The Team’s Ability To Provide Timely Response To Requests For On‐site Support. Provide Timelines And Examples Of The Team’s Success In Providing This Response. Include Both Primary And Sub‐contractor Support As Required. Teams With A Demonstrated History Of Providing Timely Support May Be Considered More Favorably. criterion 7—volume Of Work (sf 330, Part 1, Section H) (tie-breaker) in The Event Of A Tie Among Equally Rated Firms, Those Firms Will Be Evaluated In Accordance With Dod Federal Acquisition Regulation Supplement (dfars) Procedures, Guidance And Information (pgi) 236.602‐1, From Data Extracted From The Federal Procurement Data System (fpds). Firms Will Be Evaluated In Terms Of Work Previously Awarded To The Firm By Dod Within The Past Twelve (12) Months With The Objective Of Effecting An Equitable Distribution Of Contracts Among Qualified A‐e Firms Including Small, Disadvantaged Business Firms, And Firms That Have Not Had Prior Dod A‐e Contracts. criterion 7 Submission Requirements: firms Shall Not Submit Data For This Factor.

Details: Creation of a concept for the provision of needs-based housing for people in need of care and their relatives in the city of Frankfurt (or) As part of the Care Pact and the Local Care Funding Program of the State of Brandenburg, a report on the provision of needs-based housing for people in need of care and their relatives in the city of Frankfurt (or) is to be prepared by June 30, 2025. The basis is a well-founded assessment of the current situation and future trends to be expected in the city of Frankfurt (or) with regard to the housing situation of people in need of care and senior citizens. It should be noted that extensive data is already available in the form of the population forecast, a senior citizen survey, care structure planning and the plan for senior citizens. Particular attention should be paid to - the housing wishes of senior citizens, - generational change, - the different developments in the districts and the city center, - information on age-appropriate housing stock and - the affordability of housing. Building on this, goals and strategies for age-appropriate housing provision in Frankfurt (Oder) are to be developed.