Survey Tenders

Details: As Of 30 December 2024, The Following Amendments Have Been Made:1) The Size Standard Statement Has Been Removed And 2) The Project Manager (pm) Has Been Updated To Include R.a. Required. 1. Contract Information: these Contracts Are Procured As A Small Business Set-aside. The Naics Code’s Are 541330 And 541310. the Number One, Two And Three Ranked Small Business Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. The Length Of Each Indefinite Delivery Contract (idc) Is A Maximum Of 60 Months And Will Not Include Optional Time Periods. Three (3) Idc’s Will Share $49.9m Total Capacity Of The Matoc. Task Orders Will Be Issued By Negotiated Firm-fixed-price Task Orders To The Most Technically Qualified Offeror In Response To The Task Order Requirement Notification (torn) And Will Be Issued Under The Terms And Conditions Of This Matoc. The Government Guarantees A Minimum Value Of $4,000 Seed Task Order For Each Individual Idc. Labor Rates For Each Discipline, Overhead Rates, And Escalation Factors For Each 1 Year Time Period Will Be Negotiated For Each Basic Idc And Profit Will Be Negotiated For Each Task Order Not For Each Basic Idc. work Distribution Between Idcs: Task Orders (to) Will Be Distributed According To The Experience And Qualifications Of The A-e Firms. The Specific Contractor Chosen For A To Will Be Selected Based On Factors Such As Technical Expertise, Demonstrated Performance, Specific Ability, To Size And Complexity, And Contractor Availability To Complete The To In The Time Required. We Are Going To Have The A-e Firms To Compete Amongst The Highly Qualified Selectees For This Contract. Above All, It Is The Intent Of The New York District To Not Have A “hollow” Contract. three (3) Indefinite Delivery Contracts Will Be Negotiated That Includes Level Of Efforts, Labor Rates For Each Discipline And Overhead Rates For The Contract Period. Profit Will Be Negotiated In Each Task Order Not In The Basic Contract. the Selected Small Business A-e Firms Will Need To Demonstrate Capability To Perform At Least 51% Of The Contract Work Listed Below In Accordance With Ep 715-1, Chapter 3-8 C Which Can Be Found At Http//www.usace.army.mil/publications/eng.pamphlets/ep715-1-7 in Particular, In Order To Be Awarded A Small Business Contract The Concern Will Perform At Least 51 Percent Of The Cost Of The Contract Incurred From Personnel With Its Own Employees. “any Subcontractor And Outside Associates Or Consultants Required By The Contractor (prime A-e Firm) In Connection With The Services Covered By The Contract Will Limit To Individuals Or Firms That Were Specifically Identified And Agreed To During Negotiations The Contractor Shall Obtain The Contracting Officer’s Written Consent Before Making Substitutions For These Subcontractors, Associates Or Consultants”. if A Substitution Is Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason, The Selected A-e Firm Shall Notify The Contracting Officer In Writing Within 15 Calendar Days After The Concurrences Of Any Of These Events And Provide The Following Information To The Contracting Officer: required Information For Substitution Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason: The Contractor Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitution, Complete Resumes For The New Proposed Substitutes, And Any Additional Information Requested By The Contracting Officer. Proposed Substitutes Should Have Comparable Qualifications Or Better Qualifications To Those Of The Persons Being Replaced. The Contracting Officer Will Notify The Contractor Within 15 Calendar Days After Receipt Of All Required Information Of The Decision On Substitutions. approximate Award Date: June 2025 the Wages And Benefits Of Services Employees (see Far 22.10) Performing Under This Contract Must Be At Least Equal To Those Determined By The Department Of Labor Under The Service Contract Act, As Determined Relative To The Employee’s Office Location (not Of The Location Of The Work). To Be Eligible For A Contract Award, The Firm Must Be Registered In The Dod Central Contractor Registration (ccr). Registered Via The Ccr Internet Site At Http://www.ccr.gov Or By Contacting The Dod Electronic Commerce Information Center At 1-800-334-3414. 2. Project Information: a-e Services May Include But Not Be Limited To The Following: general Architect Engineering Services To Include Support Of The Milcon Programs, Sustainment, Restoration And Modernization (srm) Program, Iis Program And Other Non-military Construction Programs Within Nan/nad Boundaries. architect Engineering (a-e) Services For Smaller Scale Projects Typically With A Construction Cost Of Approximately $10m Or Less To Include The Following: construction Of New And Renovation/upgrade Of Multiple Hangar/buildings, Maintenance, Training Facilities (hands-on/simulators), Aviation Facilities, Runways And Taxiways, Aircraft Fueling Facilities/distribution, Industrial Facilities, Vehicle Maintenance Facilities, Research & Design Facilities (armament, Munitions And Communications), Munitions And Storage Facilities, Dining Facilities, Academic Labs, Barracks/dormitories, Academic Facilities, Administrative Office Buildings antarctic/cold Region Construction. whole And/or Partial Building Renovations Which Address Interior Re-configuration, Life/safety, Energy Conservation, And Utility Systems. architectural Alterations Which Address New Space Requirements, Programmed Functions Such As: Maintenance, Training Facilities, Storage, Administrative Spaces, And Squad/ops. new Building Exterior And Envelope (cold Region) Shall Follow The Architectural Compatibility Plan Defined At The Base Inclusive Of, Structural Roof Systems, Insulation And Waterproofing, Windows, And Atfp. mechanical/electrical/plumbing (mep): Fire Suppression And Water Supply Systems, Fire Alarm And Mass Notification System, Cybersecurity, Fire Detection/protection/monitoring And Controls, Heating And Ventilation Systems, Plumbing Systems, Electrical Systems, Telecommunication And Cabling Systems, Closed Circuit Television (cctv), Alarm And Card Access Systems, And Public Address Systems. topographic Surveys, Geological Surveys, Geotechnical Investigations, Environmental Investigations, Master Planning Studies, Value Engineering Studies, Field Investigation Studies, Construction Support Services. asbestos And Lead Abatement Services Related To Building Renovation Or Demolition. perform/conduct Design Charrettes Including Eco-charrettes prepare Studies (to Include Building, Energy, Life-cycle Studies) prepare Parametric Designs, To Include Development Of Dd Form 1391 Preparation. site & Infrastructure/seismic Design In Accordance With The Ufc’s development Of Design Criteria And Basis Of Design design Work Analysis And Technical Specifications nepa Documentation And Coordination historic Architecture And Section 106 Consultation preparation Of Permit Applications. preparation Of Design/build Documents preparation Of Arctic Foundation Designs, Building Air Tightness And Hvac Performance For Cold/arctic Regions. preparation Of Designs Including Hemp And Scif Areas. preparation Final Design Construction Documents antiterrorism/force Protection Design In Accordance With Applicable Ufc’s sustainable Design/gbi/net Zero Strategy Development cost Estimating Using The Latest Version Mii [m2] Software. value Engineering Studies And Cost Schedule Risk Analysis (csra). preparation Of Deliverables In Building Information Modeling (bim) Format. drawings In Accordance With The Architectural/engineering/construction (a/e/c) Computer-aided Standard Version (cadd) demonstrated Construction Phase Services: design During Construction preparation Of Operation And Maintenance Manuals providing Technical Assistance – Responding To Requests For Information (rfis) design Build Conformance Reviews shop Drawing Review – Review Of Shop Drawings And Submittals conduct Site Visits commissioning/enhanced Commissioning; Fit-up Design Support project Start-up – Coordinate With Contractors To Start Up And Conduct Performance Tests Of The Constructed Project. projects Designed Under These Contracts May Require Designers To Obtain Security Clearances As Well As Having Physical Security Measures In Place Before A Firm Can Do The Work. Security Clearances Are Not Required At The Time Of Selection Or Award Of A Contract. 3. Selection Criteria: primary Selection Criteria: the Selection Criteria Are Listed Below In Descending Order Of Importance (first By Major Criterion And Then By Each Sub-criterion). criteria A Through E Are Primary Selection Criteria. criteria F Through H Are Secondary Selection Criteria And Will Only Be Used As Tiebreakers Among Technically Equal Firms. the Firm Is Required To Have The Following Specific Design Capabilities: a. Specialized Experience And Technical Competence In: submit At Least Five (5) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Building (whole And/or Partial) Renovation Design That Includes At Least Five (5) Of The Following Design Elements As A Substantial Part Of The Design (replacement Of Architectural Elements, Interior Re-configuration, Building Seismic Upgrade, Anti-terrorism/force Protection Upgrades, Mechanical Systems, Hvac Systems, Electrical Upgrades, Fire Protection/detection Systems, Exterior Envelope Upgrades Including Roof, Windows And Walls, Asbestos And Lead Abatement.). The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Three (3) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Infrastructure Type Design That Includes At Least Three (3) Of The Following Design Elements As A Substantial Part Of The Design. The Ae Shall Demonstrate Experience In Planning, Designing And Preparing 100% Construction Bid Documents. Projects May Include The Following Project Types (each Example Project Shall Represent A Different Project Type): Road/parking Replacement/repairs, Utility Infrastructure Replacement/repairs, Utility Central Plant Upgrades/repairs, And Retaining Wall Upgrades/repairs. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of At Least $5m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Two (2) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Design Of New Facilities. The Ae Shall Demonstrate Experience In Sustainable Design Using An Integrated Design Approach And Emphasizing Environmental Stewardship, With Experience In Energy And Water Conservation And Efficiency; And Employing The Leed Evaluation And Certification Methods. The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. the Above Requested Projects Shall Also Demonstrate The A/e’s Abilities With All Of The Following: - Planning And Scheduling Management Of Fast Track Designs, - Working On Military Installation Projects, - Prepare Cost Estimates Using Mii And Paces, (the Cost Estimator And/or The Subcontractor Should Demonstrate Familiarity With The Changing Dynamics Of The Current Construction Market In The Tri-state New York Area With Particular Emphasis On The Southern New Jersey), - Preparing Drawings In Autocad And Autocad Revit, - Experience In The Ability To Provide A Qa/qc Plan Indicating How The Prime Plans To Manage Their Team To Ensure That Quality Products Are Prepared. Demonstrate Ability To Produce Quality Designs. Evaluation Will Be Based On The Firm's Design Quality Management Plan (dqmp) And Will Consider The Management Approach, Coordination Of Disciplines, Management Of Subcontractors And Quality Control Procedures. on All Ten (10) Example Projects, The Government May Consider The Following Strengths For Evaluation Purposes: projects Demonstrating Experience Working At Military Installations Within Nan Boundaries. projects Demonstrating Experience Working With Nydec And Njdep In Obtaining Environmental Permits. projects Demonstrating Experience With Sustainable Design And Achieving Leed Silver Or Better. projects Demonstrating Experience Working Mcaces Paces And Pax/dd1391. projects Demonstrating Experience With Fast-tracked Designs. projects Demonstrating Experience Utilizing A Design Quality Control Plan projects Demonstrating Experience In Permitting, Real Estate Actions, Nepa Documentation, And Other Agency Coordination Tasks. b. Qualified Registered Professional Personnel In The Following Key Disciplines: project Manager (p.e. Or R.a. Required) quality Assurance Manager (p.e. Or R.a. Required) architecture (r.a. Required) structural Engineering (p.e. Required) civil Engineering (p.e. Required) mechanical Engineering (p.e. Required) electrical Engineering (p.e. Required) fire Protection Engineering (p.e. Required) landscape Architect (r.la. Required) cost Engineering (p.e. Required. Those With Ccp/cpe Certification Will Be Considered A Strength) geotechnical Engineering (p.e. Required) certified Industrial Hygienist (cih Required) licensed Interior Designer (ncid Required) land Surveyor (p.l.s. Required) anti-terrorism/force Protection Specialist (p.e. Required) blast/explosives Safety Engineering (p.e. Required) industrial Engineering (p.e. Required) industrial/process Engineer (p.e. Required) lean-six Sigma Professional historic Preservationist environmental Engineering (p.e. Required) lead Commissioning Specialist (p.e And At Least One Of The Following: A Nebb Qualified Systems Commissioning Administrator (sca); Acg Certified Commissioning Authority (cxa); Icb/tabb Certified Commissioning Supervisor; Bca Certified Commissioning Professional (ccp); Aee Certified Building Commissioning Professional (cbcp); University Of Wisconsin-madison Qualified Commissioning Process Provider (qcxp); Ashrae Commissioning Process Management Professional (cpmp)) certified Value Specialist (cvs Required) telecommunications Engineering (rccd Required) master Planner (p.e. Or R.a. Required) the Evaluations Will Consider Education, Training, Registration, Voluntary Certificates, Overall And Relevant Experience, And Longevity With The Firm Using Information From Section E Of The Sf 330. The Sf 330 Includes A Matrix In Section G Showing Experience Of The Proposed Lead Designers On The Projects Listed In Section F Of The Sf 330. senior Project Personnel For Each Discipline Are Required To Be Licensed And/or Registered. additional Disciplines May Be Submitted As Required By The Ae For This Type/size Project And Will Be Evaluated As The Above. fire Protection Engineering: The Services And Qualifications Of Fire Protection Engineers Are Shown In Section 1.6 Of Ufc 3-600-01, And Are Reiterated Here: A Qualified Fire Protection Engineer Shall Be An Integral Part Of The Design As It Relates To Fire Protection. This Includes, But Is Not Limited To, Building Code Analysis, Life Safety Code Analysis, Design Of Automatic Detection And Suppression Systems, Water Supply Analysis, And A Multi-discipline Review Of The Entire Project. For The Purposes Of Meeting This Requirement A Qualified Fire Protection Engineer Is Defined As An Individual Meeting One Of The Following Conditions: i.) A Registered Professional Engineer (p.e.) Having A Bachelor Of Science Or Master Of Science Degree In Fire Protection Engineering, From An Accredited University Engineering Program, Plus A Minimum Of 5 Years’ Work Experience In Fire Protection Engineering. ii.) A Registered Professional Engineer (p.e.) Who Has Passed The National Council Of Examiners For Engineering And Surveys (ncees) Fire Protection Engineering Written examination. iii.) A Registered Professional Engineer (p.e.) In A Related Engineering Discipline With A Minimum Of 5 Years’ Experience, Dedicated To Fire Protection Engineering That Can Be Verified With Documentation. the Ae And Their Subconsultants Must Be A U.s. Company(ies). The Ae’s Team Must Use Only U.s. Citizens Or U.s. Persons (an Individual Who Has Been Lawfully Admitted For Permanent Residence As Defined In 8 U.s.c. § 1101(a)(20) Or Who Is A Protected Individual As Defined By Title 8 U.s.c. § 1324b (a)(3)). The A-e’s Team Must Be Able To Obtain Visitor Registration Documents/passes To Access Any Military Base And/or Federal Facility Under This Contract. c. Past Performance On Dod And Other Contracts With Respect To Cost Control, Quality Of Work And Compliance With Performance Schedules, As Determined From References, Other Sources And Cpars. Letters Of Recommendation From Customers Addressing Your Firm’s Cost Control, Quality Of Work And Schedule Compliance Capabilities May Be Included In Section H Of The Sf 330. Letters Should Be For Projects Of A Similar Nature And Shall Be No Older Than Three Years To Be Considered. d. Capacity To Initiate Work And Complete Within The Time Parameters Of The Project. The Evaluation Will Consider The Availability Of An Adequate Number Of Personnel In All Key Disciplines. The Evaluation Will Review Part Ii Of The Sf330 To Evaluate The Overall Capacity Of The Team. Include A Part Ii Form Of The Sf 330 For Each Firm And Each Office Of Each Firm That Is Part Of The Proposed Team. e. Knowledge Of The Locality In The General Geographical Area Of Ny District Boundaries. The Evaluators Will Review Projects Identified In Section F, The Specific Experience Of The Listed Key Discipline In Section E And Additional Information In Section H In Order Of Preference. secondary Selection Criteria: f. Geographic Proximity In Relation To Ny District Boundaries. g. Volume Of Work Previously Awarded To The Firm By The Department Of Defense, With The Object Of Effecting An Equitable Distribution Among Qualified A/e Firms, Including Small Business, Veteran-owned Small Business, Service-disabled Small Business, Hubzone Small Business, Small Disadvantaged Small Business And Woman-owned Small Business And Minority Institutions And Firms That Have Not Had Prior Dod Contracts. 4. Submission Requirements: interested Prime Firms Having The Capabilities To Perform These Services Must Submit Their Sf330 To Stephen Dibari By Email Stephen.dibari@usace.army.mil Maximum File Size Is 25 Mb If Overall Sf330 Is Larger Than 25 Mb, Please Break Up The File Into Smaller Separate Files. no Hard Copies Of Sf-330’s Will Be Required. Do Not Mail Sf-330’s (cd Or Hard Copies) To The Contract Specialist Nor To Stephen Dibari At 26 Federal Plaza. Doing So, Will Delay The Ae Selection/award Process. the Sf 330 Can Be Found By Searching For Sf330 On The Following Gsa Website: Https://www.gsa.gov/forms the Forms Can Be Downloaded In A .pdf File Type. Total Submittal Page Limitation Is 85 Pages. Section E Is Limited To 50 Pages. Section F Is Limited To 10 Pages (1 Page Per Project). Each Page Shall Be Numbered. Section Dividers, Front And Back Covers, Cover Letter And Part Ii Of The Sf 330 Don’t Count Towards Overall Page Limit. Tabloid Size Paper 11” X 17” Pages For Organizational Chart Or Other Graphics Will Count As One Page. Submittals Not Following These Instructions, May Not Be Evaluated By The Board. supplemental Information On The Sf 330 Is Posted On The Ny District Usace Website: Https://www.nan.usace.army.mil/business-with-us/engineering-division/ submittals Will Not Be Accepted After 2:00 Pm On The Response Date Shown In The Advertisement In The Https://sam.gov/. If The Response Date Falls On A Saturday, Sunday, Or A Federal Holiday, The Response Date Will Move To The Next Business Day. for Questions Regarding This Contract, Contact Stephen.dibari@usace.army.mil if A Pre-selection Meeting Is Required, Notifications Will Not Be Sent After Approval Of The Pre-selection. Notification Of All Firms Will Be Made Within Ten (10) Calendar Days After Selection Approval. In Addition To The Two (2) Items Listed Above, The Remaining Info On Release Of Information On Firm Selection Shall Be In Accordance With Uai Subpart 5.4 (usace Acquisition Instructions). interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project. firms Must Be Registered In The Following: Https://www.sam.gov/ naics Code’s Are 541330 And 541310. interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project.

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)||tbd|n00383|tbd|tbd|tbd|tbd||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportuity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| limitation Of Liability--high-value Items (feb 1997)|1|| limitations On Pass-through Charges (jun 2020)|1|| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| facsimile Proposals (oct 1997)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| the Purpose Of This Amendment Is To Incorporate The Following Change: 1. The Quantity Is Increased By Qty 5 To Qty 7. \ this Solicitation Will Be Using Competitive Procedures. This Requirement Will Be Limited To Government Government Approved Sources. Submission Of An Offer Indicates Acceptance Of, And Compliance With, The Requirement To Be An Approved Source For This Item. the Basis Of Award Will Be Trade-off. Offers Will Be Evaluated Based On The Non-price Factors Of Capacity, Delivery, And Past Performance, And When Combined, Those Non-price Factors Being More Important Than Price. Proposal Submission Should Include Non-price factors And Price Information. Price Will Still Be A Factor In Determining The Awardee. relevant Past Performance Demonstrates The Offeror's Past Performance Manufacturing (or Repair) An Item Of The Same Or Similar Scope, Complexity And Magnitude Relative To The Instant Requirement. The Submission Of Past Performance Should Be Limited To Three relevant Contracts. the Closing Date For This Solicitation Is Listed On Page 1. the Proposal May Be E-mailed To The Below Address And Must Be Received On Or Before 2:00 Pm Est Of The Closing Date. offers Received After The Closing Date Are Considered To Be Late And Will Not Be Considered For Award. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders, And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such As E-mail. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To Issue Contractual Documents As Detailed Herein. \ 1. Scope 1.1 . Markings Shall Be In Accordance With Mil-std-130. 1.2 Pre-award / Post Award Requirements: due To The Critical Use Of This Item And Its Quality History, A Pre-award Survey And Post-award Conference May Be Required For All New Manufacturers. For All Previous Sources, A Post-award Conference May Be Recommended. 1.3 . The Contractor Shall Include On The Detailed Process/operation Sheets Developed, (1) All In House Manufacturing Processes And (2) The Identity Of All Manufacturing Sources Performing Processes/operations Outside Their Facility. These Sheets Shall Not Be revised Or Altered After The Successful Completion Of First Article Or Production Lot Testing Without Approval From The Basic Design Engineering Activity, Via The Pco. 1.4 . Unless Otherwise Specified, For Fabricated Parts, The Inspection method Sheets/ Final Inspection Sheets Shall List The Characteristics of Each Item Produced Under The Contract. the Manufacturer Shall Be Required To Provide Certifications Of All Raw material Including Castings And Forgings. The Material Source Shall Be identified And The Documentation Shall Be Able To Identify The Customer and/or Contract Number. The Manufacturer Shall Maintain All Raw Material documentation For A Minimum Of Ten (10) Years. the Contractor Is Responsible For Providing Completed Inspection Method Sheets/final Inspection Sheets Showing The Actual Dimensions Taken For all Characteristics,in Addition, Critical Characteristics Shall Be annotated. 1.5 The Components Being Acquired Under This Solicitation Have Been Classified As Flight Critical Requiring Engineering Source Approval By The Naval Air Systems Command. Only Those Companies Who Have Submitted Requests For Source Approval And Been Approved will Be Eligible For Award Under This Solicitation. Any Company Not Previously Approved May Submit A Source Approval Request To The Contracting Officer, Naval Inventory Control Point, (see Block 10 Of The sf33 For Name And Code). The Source Approval Request Shall Contain The Following Documentation And Shall Be Submitted By The Closing Date Of This Solicitation: (a) Copy Of Complete Configuration Drawings For A Similar Item(s) Which Your Company Has Produced Within The Past Three Years, Including Test Procedures For Which Your Company (1) Has Been Qualified To Manufacture And (2) Which Is Similar, I.e., Requires The same Materials, Manufacturing Processes, Inspections, Tolerances And Similar Application As The Item(s) For Which You Are Seeking Approval. (b) Copy Of The Complete Process/operation Sheets Used To Manufacuture The Similar Item, Including But Not Limited To, Detailed Shop Sketches. These Plans Must Note Those Operations And Processes Performed By Subcontractors/ Vendors. (c) Complete Copies Of Purchase Orders, Shipping Documents, Etc. That Document Delivery Of Production Quantities Of The Part To The Original Equipment Manufacturer Or Military Service. Provide The Most Recent Copies Of The Documents. (d) A Detailed Comparative Analysis Of The Differences/similarities Between The Similar Part And The Part(s) For Which You Are Seeking Approval. This Analysis Should Include Materials, Configuration, Tolerances, Process Requirements, Dimensions, Castings, forgings, Etc. (e) Copy Of Inspection Method Sheets Used In The Manufacturing And At Final Inspection. These Sheets Should Include Actual Tolerance, Print Requirements, Inspection Devices, Sources Performing The Operation And Level Of Inspection. Critical Characteristics should Be Discernible From All Other Characteristics. the Above Requirements Are A Subset Of Requirements Specified In The Aso source Approval Information Brochure Dated January 1995. The Submission Of This Data Subset Is Contingent Upon And In Consideration Of The Submitting Contractor Meeting All Other Requirements Specified In This Solicitation To Include A Bilateral Agreement With mda Which Includes Availability Of Complete Data, Mrb Disposition, Etc. Any Company Not Having Such Agreement, But Desiring To Seek Engineering Source Approval, Will Be Required To Submit Data Meeting All Requirements Of The Aso/navicp Source Approval brochure. the Contractor Shall Notify Navicp Code 072 When Material Required By This Contract Has Been Shipped To Destination.this Shall Be Accomplished By Sending a Copy Of The Dd Form 250, Material Inspection And Receiving Report To: naval Inventory Control Point attn: Code 072 700 Robbins Avenue, Phila., Pa 19111 or By Submitting A Facsimile To Fax: (215)697-2524, Attn: Code 072. 1.6 Sampling Rates (aqls) Indicated Below Shall Be Used In Accordance With ansi Z1.4 For Single Sampling And A General Inspection Level Of Ii. 1.7 In Addition To The 100% Pco Mandatory, Critical And Major Characteristics, attributes For Plating, Hardness And Non-destructive Testing Will Be Inspected one Hundred Percent. 1.8 Contractor Shall Develop A System For Identification Of Individual piece Parts For Traceability Purposes. Markings Shall Not Be Permanent. 1.9 An Aql Of 1.5 Will Be Used For Class 3 Threads And Dimensions, And geometric Feature Controls With A Tolerance Range Of .010 Or Less. 1.10 For Minor Characteristics, A Sampling Rate Determined By The Contractor and Subject To Qar Approval Will Be Used. 1.11 The Material Covered In This Contract/purchase Order Will Be Used In A crucial Shipboard System Enabling The Launch And/or Recovery Of Aircraft. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In A Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems Or Loss Of Aircraft. Therefore,the Material Has Been designated As Critical Material And Special Control Procedures Are Invoked to Ensure Receipt Of Correct Material. 1.12 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;nawc Lakehurst; Drawing Number ( ;34000d1532801; ) ;rev "c" ; , Revision ;applies; And All Details And Specifications Referenced Therein. 1.13 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not be Provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced specification. 1.14 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents drawing Data=mpr 1222 |80020| A| |d| | | | drawing Data=mpr 1223 |80020| C| |d| | | | 3. Requirements 1.unique Requirements: a.all Records Pertaining To Alre Csi/cai Manufacture And Inspection/test Shall Be Provided To The Alre Cognizant Technical Authority. All Records Shall Be Maintained By Lke Qa And By The Manufacturer For A Period Of Seven Years. 2. Interim Inspection Requirements: The Following Item(s) Requires An Interim Inspection At The Contractor's Location: a. P/n 34000d1532801, Aft Bogey Assembly (csi): i. Witness Of Torque Per Notes 2, 3, 4, And 5 Of Drawing 34000d1532801 (m101-m104). b. P/n 34000d1532802, Aft Bogey (csi): i. Verification Of Material Properties Per Note 3 Of Drawing 34000d1532802 (c101). ii. Witness Of Hardness Testing Per Note 3 Of Drawing 34000d1532802(c101). iii. Witness Of Ultrasonic Testing Per Note 3 Of Drawing 34000d1532802iv. Witness Of Penetrant Inspection Per Note 5 Of Drawing 34000d1532802 (m101). v. Witness Of Torque Per Note 8 Of Drawing 34000d1532802 (m102). vi. Witness Of Dimensional Inspection Per Drawing 34000d1532802 (c102-c106, M103-m105). c. P/n 34000d1532803; Wheel Assy, Horizontal, Aft (csi): i. Witness Of Torque Per Notes 4 And 5 Of Drawing 34000d1532803 (m101, M102). d. P/n 34000d1532804; Bracket, Horiz, Wheel, Aft (csi):i. Verification Of Material Properties Per Note 4 Of Drawing 34000d1532804 (c101). ii. Witness Of Hardness Testing Per Note 4 Of Drawing 34000d1532804 (c101). iii. Witness Of Ultrasonic Testing Per Note 4 Of Drawing 34000d1532804(c101)/ Iv. Witness Of Penetrant Inspection Per Note 9 Of Drawing 34000d1532804(m101). v. Witness Of Dimensional Inspection Per Drawing 34000d1532804 (c102). the Contractor Shall Assist On The Conduct Of The Interim Inspection(s) As Described Herein. The Contractor Shall Provide Adequate Facilities, Inspection Equipment, And Skilled Personnel, To Support The Nawcadlkenspector In The Conduct Of The Interim inspection(s). The Contractor Shall Provide Gauges, Tools, Fixtures, And Jigs Necessary To Perform The Inspections.the Contractor Shall Also Provide Sufficient Rigging/material Handling Services And Manpower To Setup/configure/operate Equipment& Machines Used to Accomplish The Inspection Task. This Contractorssist Requirement Shall Be Applicable To 100% Of The Production Quantitiesand As A Minimum, Include Inspection Of All (100%) Interim Inspectionrequirements Identified Above. 3. Alre Csi Parts Require Certification. When Certified, An Alre Part Is Marked With A Material Identification Code(mic). Nawcadlke Qa Will Provide The Mic To Dcma If The Component Is Source Accepted, And After Receipt Of All Aassociated Data. Application Of mic Shall Be In The Same Methodology As The Drawing Note For Part Marking, And In Same Area As Partmarking (next To, Above, Or Below). 4. Receipt Inspection And Certification Of Sub-components: a. P/ns 34000d1532802, 34000d1532803, And 34000d1532804 Shall Be Certified At The Time Of Interim Inspection. Parts Will Be Certified And Markedas Directed By Nawcadlke Prior To Assembly. Contractor Assist Andmarking As Specified Below Applies. 5. Receipt Inspection And Certification Of The Top Assembly: a. The Receipt Inspection And Certification Of The Top Assembly Shall Occur During The Final Inspection. Contractor Assist And Part Marking As Specified Below Applies. 6. Contractor Assist And Part Marking: a. The Contractor Shall Assist On The Conduct Of The Inspections (both Final And Interim) Required That Are Necessary To Certify The Critical Items 6. Contractor Assist And Part Marking: a. The Contractor Shall Assist On The Conduct Of The Inspections (both Finalnd Interim) Required That Are Necessary To Certify The Critical Items Specified Herein. The Contractor Shall Provide Adequate Facilities, Inspectionequipment, And Skilled Personnel, To support The Nawcadlke Inspectorin The Conduct Of The Interim Inspection(s). The Contractor Shall Provide Gauges, Tools, Fixtures, And Jigs Necessary To Perform The Inspections. The Contractor Shall Also Provide Sufficient Rigging/material Handlingservices And manpower To Setup/configure/operate Equipment & Machines Used To Accomplish The Inspection Task. This Contractor Assist Requirement Shall Be Applicable To 100% Of The Production Quantities. As Part Of The Mri Process, The Nawcadlke Qa Representative Will provide, In Writing, A Certification Number Along With Direction For Marking Thecritical Safety Items (csi). 4. Quality Assurance 4.1 Review Documentation As Provided Under Dd 1423 Requirements. 4.2 Critical Manufacturing Processes ( ;n/a; ) Heat Treat ( ;applies; ) Welding ( ;n/a; ) Cadmium Plating ( ;n/a; ) Engineering Chrome Plating ( ;n/a; ) Nickel Chrome Plating ( ;n/a; ) Casting(s) ( ;n/a; ) Forging(s) ( ;mpr 1222, Mpr 1223; ) Mpr (material Processing Requirements) 4.3 The Test To Be Performed Under The First Article Approval Clause (far 52.209-3) Of The Contract Are Listed Below 4.3.1 Dimensional Test (special) ;close Machine Tolerances, Hardness Test; 4.3.2 Requirements Of: ;lke Drawing Package; 4.3.3 Form ;applies; 4.3.4 Fit ;n/a; 4.3.5 Function ;n/a; 4.3.6 Compliance With Drawing ( ;80020; ) ;34000d1532801; , Revision ;c; And Specifications Referenced Therein. 4.4 In Addition To The Above Tests, The First Article(s) To Be Inspected Hereunder Shall Also Be Subjected To Those Tests Which Will Demonstrate That The Article(s) Comply With The Contract Requirements 4.5 The Contractor Shall Be Responsible For Providing The Necessary Parts And Repair Of The First Article Sample(s) During Inspection 4.6 The Contractor Shall Notify The Pco, Aco, And Qar Fourteen (14) Days Prior To Conducting The First Article Test So That The Government May Witness Such Testing. 4.6.1 The Qar Shall Be Present To Witness All First Article Testing. 4.6.2 The Following Additional Personnel Shall Witness The First Article Testing: ;lonnie White Nawc Qa Rep At Fax (732) 323-4986; 4.7 Disposition Of Fat Samples 4.7.1 ; ; Sample(s) May Be Destroyed During Testing. 4.7.2 ;applies; Unless Otherwise Provided For In The Contract, Sample(s) Shall Remain At The Contractor And May Be Considered As Production Items Under The Contract Provided The Sample(s) Can Be Refurbished To Ready For Issue Condition And Provided The sample(s) Have Inspection Approval Of The Cognizant Dcmc Qar. Sample(s) May Be Shipped As Production Items Only After All Other Units Required Under The Contract Have Been Produced And Are Ready For Shipment. 4.8 Test Sample Coating Instructions 4.8.1 Samples Are To Be Unpainted. Corrosive Areas Are To Be Coated With A Light Preservative If Required. 4.9 Notice To Government Of Testing At The Contractors Facility. 4.9.1 Far 52.209-3 Applies (a) The Contractor Shall Present ;one; ; Unit(s) Of The Following Cage( ;80020; ; ), Part Number ;34000d1532801; ; , Revision ;c; ; As Specified In This Contract. At Least Fourteen (14) Calendar Days Before The Beginning Of The First Article Testing, The contractor Shall Notify The Contracting Officer, In Writing, Of The Time And Location Of The Testing So That The Government May Witness The Tests. (b) The Contractor Shall Submit The First Article Test Report Within 15 Calendar Days From The Date Of Testing To: ;pco; ; the Contractor Shall Mark The Report "first Article Test Report" And Cite The Contract Number And Lot/item Number. Review Documentation As Provided Under The Dd1423 Requirements. (c) Within 45 Calendar Days After The Government Inspects The First Article, The Contracting Officer Shall Notify The Contractor, In Writing, Of The Approval, Conditional Approval, Or Disapproval Of The First Article. The Notice Of Approval, Conditional approval, Or Disapproval Shall Not Relieve The Contractor From Complying With All Requirements Of The Specifications And All Other Terms And Conditions Of This Contract. A Notice Of Conditional Approval Shall State Any Further Action Required Of The contractor. A Notice Of Disapproval Shall Cite Reasons For Disapproval. (d) If The First Article Is Disapproved, The Contractor, Upon Government Request Shall Repeat Any Or All First Article Tests. After Each Request For Additional Tests, The Contractor Shall Make Any Necessary Changes, Modifications, Or Repairs To The First article Or Select Another First Article For Testing. All Costs Related To These Tests Are To Be Borne By The Contractor, Including Any And All Costs For Additional Tests Following A Disapproval. The Contractor Shall Then Conduct The Tests And Deliver Another report To The Government Under The Terms And Conditions And Within The Time Specified In Paragraph B Above. The Government Reserves The Right To Require An Equitable Adjustment Of The Contract Price For Any Extension Of The Delivery Schedule Or For Any additional Costs To The Government Related To These Tests. (e) If The Contractor Fails To Present Any First Article On Time, Or The Contracting Officer Disapproves Any First Article, The Contractor Shall Be Deemed To Have Failed To Make Delivery Within The Meaning Of The Default Clause Of This Contract. (f) Unless Otherwise Provided In The Contract, And If The Approved First Article Is Not Consumed Or Destroyed In Testing, The Contractor May Deliver The Approved First Article As Part Of The Contract Quantity If It Meets All Contract Requirements For acceptance. (g) If The Government Does Not Act Within The Time Specified In Paragraph (c) Above The Contracting Officer, Shall, Upon Timely Written Request From The Contractor, Equitably Adjust Under The Changes Clause Of This Contract The Delivery Or Performance Dates and/or The Contract Price, And Any Other Contractual Term Affected By The Delay. (h) Before First Article Approval, The Acquisition Of Materials Or Components For, Or The Commencement Of Production Or, The Balance Of The Contract Quantity Is At The Sole Risk Of The Contractor. Before First Article Approval, The Costs Thereof Shall Not Be allocated To This Contract For 1) Progress Payments, Or 2) Termination Settlements If The Contract Is Terminated For The Convenience Of The Government. The Contractor Is Responsible For Providing Operating And Maintenance Instructions, Spare Parts, And Repair of The First Article During Any First Article Test. (i) The Contractor Shall Produce Both The First Article And The Production Quantity At The Same Facility And Shall Submit A Certification To The Effect With Each First Article. (j) The Test Report (2 Copies) Shall Be In Accordance With Mil-std-831, Unless Otherwise Specified On The Dd1423, And Shall Be Submitted Via The Cognizant Dcmc To Navsup, Attn: (cite Name And Code In Block 10.a Of The Sf33). The Dcmc Shall Provide Comments On form Dd1222 (2 Copies) Which Shall Be Forwarded With The Test Report. Approval Of The Test Report Is The Pco's Responsibility. Upon Notification Of Approval, Condition Approval, The Aco Shall Execute The Dd250 To Indicate Government Acceptance Of The Test report. 4.10 Alternate Offers - Waiver Of First Article Approval Requirements. (the Following Provisions Supersede Any Waiver Of First Article Approval Requirements Terms Set Forth In Clause 52.209-3 Or 52.209-4 As Appropriate) (a) Unless Otherwise Specified In The Solicitation, Navsup Wss Reserves The Right To Waive The First Article Approval Requirements Specified Herein For Offerors Who Have Previously Furnished Identical Production Articles Accepted By The Government Or The original Equipment Manufacturer/prime Manufacturer. An Offeror Requesting Waiver Of First Article Requirements Shall Submit Evidence With Its Offer Establishing That: (i) The Last Production Unit Was Delivered Within Three (3) Years Of The Issue Date Of This Solicitation, And (ii) The Production Location To Be Used For This Requirement Is The Same As Used For The Previous Production Run. additionally, The Offeror Shall Submit A Certification, To Be Executed By The Officer Or Employee For The Offer, Stating That: (i) The Articles To Be Provided Will Be Produced Using The Same Facilities, Processes, Sequences Of Operations And Approved Subcontractors As Those Previously Delivered And Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer, and (ii) The Previous Production Units Were Manufactured Without Material Review Board Disposition Or Waiver/deviation Request Or Rejection Of Pre-production Samples For Cause. (note: This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States And The Making Of A False, Fictitious, Or Fraudulent Certification May Render The Maker Subject To Prosecution Under Title 18, United States code, Section 1001.) (b) Offerors Requesting Waiver Of First Article Approval Requirements Under The Provisions Of This Clause Are Cautioned To Submit Two Prices For Articles Required Herein - One That Is Based On Compliance With The First Article Approval Requirements And one That Is Based On A Waiver Of Such Requirements. Where An Offeror Submits Only One Price And Fails To Clearly State That The Price Is Based On Waiver Of The First Article Approval Requirements It Will Be Deemed To Be Based On Compliance With The First article Approval Requirements (c) In The Event Of The First Article Approval Requirement Is Granted, The Delivery Schedule For The Production Items Shall Be Reduced By The Number Of Days Designated For Delivery Of First Article Test Unit Plus The Number Of Calendar Days Indicated For The government Notification Of Conditional Approval Or Approval. These Requirements Are Specified In The Quality Assurance Section Of This Solicitation. If The Offeror Is Unable To Meet The Desired Schedule, He Shall Insert Below The Alternate Delivery Schedule he Offers To The Government. Offeror's Proposed Alternate Delivery Schedule (based On Waiver Of First Article Approval Requirements) within Days: item No. _____________ Quantity:_______ After Date Of Contract:_________ 4.11 . Mandatory Inspection Requirements: 100% Procurement Contracting Officer (pco) Mandatory Inspection Is Required And Shall Be Accomplished At Source Under The Surveillance And Final Approval Of The Cognizant Dcmao Quality Assurance Representative (qar). during Production, Mandatory Inspection Is Required To Be Accomplished By The Contractor As Follows: A. Level Of Inspection (loi). 1. Critical Characteristics: 100% Inspection Shall Apply. 2. Major And Minor Characteristics: Loi Shall Be In Accordance With A Sampling Plan Acceptable To The Qar. B. Critical Characteristics: ;the Contractor Shall Accomplish 100% Inspection And/or Testing Of All Critical,and/or Requirements Identified In The Drawings, Drawing Notes, And Process And Results Shall Consist Of Actual Dimensions, Measurements, And Test Outcomes Andincluded In The first Article Test Report. certifications To Be On File For A Minimum Of Seven Years After Delivery Of Contract.; C. Major And Minor Characteristics 1. Shall Be Defined By The Contractor Subject To Qar Concurrence, Unless Defined On Applicable Drawings And Associated Specifications. 4.12 Special Inspection Requirements ( ;n/a; ) Magnetic Particle Inspection ( ;applies; ) Surface Inspection ( ;applies. Liquid; ) Penetrant Inspection ( ;n/a; ) Radiographic Inspection ( ;applies; ) Ultrsonic Inspection ( ;n/a; ) High Shock Test ( ;n/a; ) Mechanical Vibration Test 4.13 Final Inspection Requirement:due To The Critical Nature Of This Item, Representatives Of The Buying office/and The Cognizant Field Activity, Nawc Lakehurst, Shall Be Notified By The Successful Contractor At Least 14 Days Prior To Presentation To The Dcm Qar Of The Items For Final Inspection So That They May Have The Option Of witnessing The Final Inspection. The Contractor Shall Notify By Email Or telefax Pco And Nawc Lakehurst Qa ;lonnie White Nawc Qa Rep At Fax (732) 323-4986; To Arrange For The Final Inspection.the Authority Of The Qar Shall Not Be Abrogated. If The Notification Is Not Given To Both Sites Then The Qar Shall Not Accept The Units. quality Assurance Requirements 1. First Article Testing: the Contractor Shall Conduct First Article Testing On This Item Of Alre/se And Must Address All Elements Listed Below And Prepare A First Article Test Report Documenting The Outcome. Unless Otherwise Specified, The Report And Its Acceptance Shall Be Per The provisions Of The Applicable Contract Data Requirements List (cdrl). a. Requirements: i. First Article Quantity Is One (1); In Uncoated Condition. ii. The First Article Shall Be Available For Government Evaluation Per The Contract Schedule. The Evaluation Shall Be Conducted In The Presence Of The Government Personnel. Accordingly, The Contractor Shall Allow Time To Arrange For Nawc Participation In accordance With The "nawcadlke Inspection Witness Option"; iii. The Contractor Shall Provide Facilities And Personnel Sufficient To Conduct All Necessary Tests To Establish Conformance; iv. The Contractor Shall Have Available For Review All Certifications, Test Repin-process Inspection Documents Needed To Substantiate Product Quality; This Same Documentation Shall Also Be Included In The First Article Test Report; v. The Contractor Shall, At The Time Of First Article, Have Corrected Any Problareas Deemed Significant And Documented As Deficient By The Government Within His/her Quality Assurance System Not Previously Identified During Prior Evaluations And/or Surveys; Any problems Identified During The Conduct Of The Test Will Also Require Correction. b. Testing And Evaluation: i. The Contractor Shall Accomplish 100% Inspection And/or Testing Of All Critic Major, And Minor Dimensions And/or Requirements Identified In The Drawings, Drawing Notes, And Process And Fabrication Specifications. Results Shall Consist Of Actual Dimensions, measurements, And Test Outcomes And Shall Be Recorded And Included In The First Article Test Report. c. Acceptance/reject Criteria: i. Satisfactorily Meeting All Requirements Cited In Paragraph 7a And Satisfactorily Demonstrating 100% Conformance To The Test And Evaluation Elements Cited In Paragraph 7.b Shall Constitute Acceptance Of The First Article. ii. Failure To Meet Any Of The Conditions In Paragraph 7.a And 7.b Shall Be Cause For Rejection. d. Delivery: i. The Accepted First Article Exhibit May Be Delivered And Counted Along With The Contract Production Quantities Providing The Item Has Not Been Damaged During Testing, And Has Been Found To Be Conforming; ii. The Contractor Is Responsible For Preparing The First Article Test Report In Accordance With Cdrl's. /2. Production Lot Special Tests: N/a 3. For Purposes Of This Tdr, The Term Ndt Shall Refer To The Following Methods: Mt - Magnetic Particle Testing, Pt - Penetrant Inspection, Ut - Ultrasonic Testing, Rt - Radiographic Testing, And Vt - Visual Testing. 4. Companies Performing Ndt Shall Be Nadcap Accredited, Or A Laboratory Accredited By One Of The Organizations Listed Below As Satisfying Iso 17025 (general Requirements For The Competence Of Testing And Calibration Laboratories). Ndt Certificates Shall Be Bear the Symbols Of Accreditationand The Accreditation Body. a. American Association For Laboratory Accreditation (a2la) b. Ansi National Accreditation Board (anab) c. International Accreditation Service, Inc. (ias) d. National Voluntary Laboratory Accreditation Program (nvlap) e. Perry Johnson Laboratory Accreditation, Inc. (pjla) f. Canadian Association For Laboratory Accreditation Inc. (cala) g. Standards Council Of Canada (scc) 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable this Is A Alre Critical Safety Item. For Drawing Updates, See Attached Nawc Lke Drawing Update Sheet. navsup Reference Only: Procurement Tdr 23-10116a, the Components Being Acquired Under This Solicitation Have Been Classified As "critical" Requiring Engineering Source Approval By Naval Air Systems Command Only Those Companies Who Have Subm& Been Approved Will Be Eligible For Award Under This Solicitation Any company Submit A Source Approval Request As Outlined In This Solicitation. \ date Of First Submission=asreq 16. Remarks Inspection/certification Data Needed To Substantiate The Quality Of The First Article Test Unit Shall Be Included In First Article Unit Packaging. The Outside Of The Package That Contains The Data Shallbe Clearly Marked "inspection/certification Data included". data Requirements: a. Copies Of All Approved Requests For Variations. b. Torque Per Drawings 34000d1532801, 34000d1532802,34000d1532803. c. Material And Mill Certifications Per Specification, 34000s1580220nd Drawings 34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117,34000d1532961, 34000d1532893, 34000d1532894, 34000d1532960,34000d1562962, 34000d1572525, 34000d1532802,34000d1532804. d. Ultrasonic Inspection Per Drawings 34000d1532804, 34000d1532802. e. Hardness Per Drawings 34000d1532802, 34000d1532804, 34000d1572525. f. Dimensional Inspection Per Drawings 34000d1532802, 34000d1533125,g. Identification Per Drawings 34000d1532802, 34000d1532803,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216,34000d1533117, 34000d1532961, 34000d1532893, 34000d1532894,34000d1532897, 34000d1532898, 34000d1532960, 34000d1562962,34000d1572525. h. Liquid Penetrant Inspection Per Drawings 34000d1532802,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216,34000d1533117, 34000d1530223, 34000d1530213. i. Welding Per Navsea S9074-ar-gib-010/278 Per Drawing34000d1530213, 34000d1530223. j. Visual Inspection Of Welds Per Drawing 34000d1562962. date Of First Submission=asreq data Requirements: a. Copies Of All Approved Requests For Variations. b. Torque Per Drawings 34000d1532801, 34000d1532802,4000d1532803. c. Material And Mill Certifications Per Specification, 34000s1580220and Drawings34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117,34000d1532961, 34000d1532893, 34000d1532894, 34000d1532960,34000d1562962, 34000d1572525, 34000d1532802,34000d1532804. d. Ultrasonic Inspection Per Drawings 34000d1532804, 34000d1532802. e. Hardness Per Drawings 34000d1532802, 34000d1532804,34000d1572525. f. Dimensional Inspection Per Drawings 34000d1532802, 34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117, 34000d1532961,34000d1532893, 34000d1532894, 34000d1532897, 34000d1532898,34000d1532960, 34000d1562962, 34000d1572525, 34000d1532804. g. Identification Per Drawings 34000d1532802, 34000d1532803,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117, 34000d1532961, 34000d1532893, 34000d1532894,34000d1532897, 34000d1532898, 34000d1532960, 34000d1562962,34000d1572525. h. Liquid Penetrant Inspection Per Drawings 34000d1532802,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216,34000d1533117, 34000d1530223, 34000d1530213. i. Welding Per Navsea S9074-ar-gib-010/278 Per Drawing34000d1530213, 34000d1530223. j. Visual Inspection Of Welds Per Drawing 34000d1562962. date Of First Submission=090 Dac the Welding Procedures Will Be Used By The Government To Verify Contractor Designated Welding Responsibilities Implement Weld Procedures For Each Cont Ractor, Subcontractor Or Welding Entity Performing Welding On Specific Work Specifications 16. Remarks (block 5) Data Requirements a. Weld Procedure Iaw Navsea S9074-ar-gib-010/278^ Para 4.2 Per Drawing 34000d1530213 And 34000d1530223. block 13) Date Of Subsequent Submmision: Approval Or Reason For Disapproval Shall Be Given By Navairwarcenacdivlke Via The P.c.o.nlt 45 Days After Disapproval. /(block 14) Addresses For Navair Codes/ navairwarcenacdivlke code Bl14000 Bldg 596 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000/ navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac the Welding Procedures Will Be Used By The Government To Verify Contractor Designated Welding Responsibilities Implement Weld Procedures For Each Cont Ractor, Subcontractor Or Welding Entity Performing Welding On Specific Work Specifications 16. Remarks (block 5 ) Data Requirements a.the Weld Procedure Qualification Test Report, Including All Supporting Test R And Documentation, Iaw Navsea S9074-aq-gib-010/248^ Para 4.2.3 And 4.6 Drawing34000d1530213 And 34000d1530223. (block 13) Date Of Subsequent Submmision: Approval Or Reason For Disapproval Shall Be Given By Navairwarcenacdivlke Via The P.c.o. Nlt 45 Days After Disapproval. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl14000 Bldg 596 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000/ navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=asreq date Of Subsequent Submission=asreq 16. Remarks (block 5) Contract Reference a. Evidence Of Welder Performance Qualification, Including Supporting Test Resudocumentation, Iaw Navsea S9074-aq-gib-010/248^ Para 5.2 Per Drawing 34000d1530213 And 34000d1530223. (block 12) Date Of First Submission - 30 Days Prior To Production. (block 13) Provide Qualification Evidence For All Welders. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference a.evidence Of Level Iii Certification Iaw T9074-as-gib-010/271^ Para 1.6 For The Individual Who Approved The Welders Qualification Training Program Iaw Navseas9074-aq-gib-010/248 Para 5.2.3.1, Per Drawing 34000d1530213 And 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference a. Visual Inspection Written Procedure To Be Used To Visually Inspect All Weldst9074-as-gib-010/271^ Para 8.3 And 1.7 Thru 1.7.3 Per Drawing 34000d1530213and 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference a. Evidence Of Approval Of The Welder Qualification Training Program Iaw Navseas9074-aq-gib-010/248^ Para 5.2.3.1(d), Per Drawing 34000d1530213 And 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference b. Evidence Of Maintenance Of Qualification For All Welders Iaw Navsea S9074-aq010/248^ Para 5.2.11 And 5.2.12 Per Drawing 34000d1530213 And 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000

Details: The subject of the public contract is construction work and related supplies and services consisting in the reconstruction of the existing bridge structure, which transfers local traffic over the bed of a watercourse with a permanent flow (malé Elbe – Vodní Linie Idvt: 10100231). The existing bridge shows a number of faults that need to be resolved as soon as possible. A separate diagnostic construction and technical survey was prepared for the bridge structure, including recommendations for further management of the bridge structure. For this reason, the contracting authority decided to carry out the reconstruction of the existing bridge structure within the given scope, while retaining the existing horizontal supporting structure. The necessary modification of the local traffic on both bridgeheads is also being addressed as part of the reconstruction. The reconstruction requires the lateral relocation of the cable line.

Details: Diagnostics of the South Posts of Building N at the Onera Center in Palaiseau The Work Units Are as Follows: • Review of the File and Drafting of a Strategic Note; • Site Installation; • Visual Inspection and Crack Survey; • Reinforcement Coating Measurements; • Moisture Measurement; • Permeability/Capillarity Measurement; • In Situ Carbonation Measurement; • Chloride Ion Dosage Measurement; • Mortar and Concrete Surface Cohesion Measurement; • Electrochemical Potential Measurement; • Measurement of the Compressive Strength of a Test Piece; • Sclerometer Measurements; • Delivery and Return of a Nacelle; • Daily Rental of a Nacelle; • Test Report; • Final Test Summary Report; • General Hypothesis Note; • “Contractual Load Case” Calculation Note; • Calculation Note “Current Load Cases”; • Calculation Note “Acceptable Load Cases”; • Recommendation Report on Repairs and Monitoring of Posts; • Final Diagnostic Report.

Details: This Framework Agreement Covers The Carrying Out Of Preliminary Land And Urban Planning Studies (Data Collection, Feasibility Study) And The Drafting Of Specific Files (Project Declaration, Declaration Of Public Utility, Environmental Study, The Carrying Out Of Impact Studies, Of The Compatibility File Of Urban Planning Documents (Excluding The Land Survey File) Relating To The Construction Of Large (Several Hundred Places) And Small Capacity (Between 15 And 150 Places, Such As Semi-Freedom Center Or Structure For Support Towards Release) Penitentiary Establishments In Mayotte. It May Be Executed Via The Issuance Of Purchase Orders And Subsequent Contracts. Framework Agreement Without Mini / With A Maxi Over The Total Duration Of The AC Of €198,000 excluding VAT. AC With A Duration Of 12 Months Renewable 3 Times - 48 Months (4 Years) Max.

Details: Sources Sought Notice n00019-24-rfpreq-tpm273-0095 t-45 F405 Engine Contractor Logistics Support (cls) Fy27-32 naics: 336412, Aircraft Engine And Engine Parts Manufacturing psc: J028 place Of Performance: Naval Air Station Kingsville (nask), Naval Air Station Meridian (nasm), Naval Air Station Pensacola (nasp) And Naval Air Station Patuxent River 1.0 Introduction naval Air Systems Command (navair) In Patuxent River, Md Along With The Naval Undergraduate Flight Training Systems Program Office (pma-273) At Naval Air Systems command (navair), Also Located At Patuxent River, Md Is Conducting A Market Survey Of Industry To Identify Potential Sources Capable Of Providing The Skills And Experience Required To Perform All Intermediate (i)-level And Depot (d)-level Maintenance And Logistics Support For The F405-rr-401 Engine And Mk Ii Gas Turbine Starter (gts). The Contract Will Include All Necessary Engineering Support To Maintain The Engine At The Organizational (o)-level, I-level And D-level. Engine Repair Services Will Be In Support Of Various Naval Air Station Facilities For The T-45 Goshawk Aircraft’s Engine Cls Contract. This Requirement Is Anticipated To Be A Five-year Idiq Contract, Beginning In Late Fiscal Year (fy) 2027 And Through Late Fy 2032. this Notice Serves As A Market Research Tool Conducted In Accordance With Federal Acquisition Regulations (far) Part 10 To Assess Potential Sources And Their Technical Capabilities For The F405 Engine Contractor Logistics Support (cls) Contract. The Findings From This Market Research Will Assist In Determining The Appropriate Procurement Strategy, Including Whether To Issue A Competitive Solicitation Or Make A Sole Source Award To Rolls Royce, The Designer, Developer And Manufacturer Of The F405-rr-401 Adour Engine. Only Those Firms Who Believe They Possess The Capability To Provide The Required Supplies And Services And Can Meet The Requirements As A Prime Contractor Or As A Joint Venture Are Invited To Respond To This Notice. primary Work Location/place Of Performance: nas Kingsville, Tx Percentage Of Total Effort ~ 50% On-site Government – 100% nas Meridian, Ms Percentage Of Total Effort ~ 40% On-site Government – 100% nas Pensacola, Fl Percentage Of Total Effort ~ 10% On-site Government – 100% nas Patuxent River, Md Percentage Of Total Effort – <1% On-site Government – 100% various Detachments To Support Carrier Qualifications Percentage Of Total Effort – <1% On-site Government – 100% contractor Program Management, Engineering, Administrative & Manufacturing Support Percentage Of Total Effort – Unknown On-site Government – 0% 2.0 Disclaimer this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Sources Sought Is Strictly Voluntary. 3.0 Anticipated Contract Type And Contract/program Background the Government Anticipates This Follow-on Contract Will Be A Single-award, Indefinite Quantity, Indefinite Delivery (idiq) Contract, Primarily Utilizing -fixed-price Clins To Support A Minimum Of 65,000 Flight Hours Annually. Task Orders For Services Will Likely Be Issued On A “power By The Hour” Basis, Where The Government Will Pay A Firm-fixed-price For Each Actual Flight Hour Flown By The Training Wings. In Addition, The Government May Negotiate And Award Additional Task Orders For Engine Repairs, Obsolescence Mitigation, And Other Related Requirements To Support The Engine Ecosystem, Specifically In The Of Training Of Student Naval Aviators. the Incumbent Contract Information Is As Follows: incumbent Contractor: Rolls Royce contract Number: N00019-22-d-0042 contract End Date: 31 July 2027 contract Type: Single Award Idiq previous Set-aside Designation: Sole Source program Background: The Rolls-royce Model F405-rr-401 Adour Engine Is The Power Plant For The T-45 Aircraft, Which Is Used To Perform The United States Navy (usn) Undergraduate Jet Pilot Training Mission. The T-45ts Is The First Totally Integrated Training System Developed For And Used By The Usn. It Includes The Boeing-built T-45goshawk Aircraft, Advanced Flight Simulators, Computer-assisted Instructional Programs, A Computerized Training Integration System, And A Contractor Logistics Support Package. The T-45ts Replaced Two Training Aircraft And Added Advanced Simulators To Improve The Process For Training U.s.navy And Marine Corps Pilots For Conversion Into The F/a-18a-d Hornet, The F/a-18e/f Super Hornet, The E/a-18g Growler, Jsf, E-2d And The Av-8b Harrierii Plus.rolls-royce Is The Sole-source Manufacturer Of The F405-rr-401 Adour Engine. navair Has Obtained A Limited Rights License For A Minimal Quantity Of The F405-rr-401 Series Engine Data. However, It Is Not A Comprehensive Technical Data Package. As The Sole Engine Manufacturer, Rrc Is The Only Source With The Technical Data Required To Engineer And Produce The F405-rr-401 Engine Parts, As Well As Perform I-level And D-level Maintenance. Additionally, Rrc Bristol Holds The Design Authority For The Engine’s Hot Section, While The Partnership With Safran Who Serves As The Design Authority For The Engine’s Cold Section. Rrc Possesses The Capabilities And Resources To Forecast Parts And Logistics Requirements, Adjusting Its Manufacturing Priorities In Real Time To Meet Maintenance Requirements. Companies That Are Capable Of Meeting This Requirement, Currently Possess Or Have Authorized Access To The Necessary Technical Data Or Have A Viable Plan To Obtain, Generate, Or Otherwise Secure The Necessary Technical Data, And Can Maintain This Capability Throughout The Duration Of The Effort Being Solicited Are Encouraged To Respond. Companies May Also Highlight Unique Data Generation Techniques That Are Currently Utilized By Your Firm Or Areas Where Modifications Can Be Performed, Or The Capability Can Be Provided, Without Technical Data Provided By The Government Or Oem. Interested Businesses Or Organic Sources Shall Demonstrate The Capability To Meet The Government’s Required Timeline. You May Also Submit Information That Demonstrates How You Could Potentially Meet This Requirement For Future Production Opportunities. current Contract Requirements Include: deliver 170 Ready For Issue (rfi) Engines Daily To Cnatra For The Duration Of The Contract;  deliver 2 Rfi Engines Daily To Nas Patuxent River; deliver 185 Rfi Gts Systems Daily To Cnatra; deliver 2 Rfi Gts Systems Daily To Nas Patuxent River For The Five-year Contract Term;  deliver Final Engineering Investigation Reports Within 180 Calendar Days Of Event; manage The F405 & Gts System Supply Chain To Meet Or Exceed The Daily Availability Metrics; aviation Maintenance Management Team (ammt) Government Inspection Results With No More Than Two Areas Graded As Non-compliant;  international Organization For Standardization (iso) 9000/1400 And Aerospace Standard (as) 9100 Certified; And repair Severely Damaged Engines. 4.0 Special Requirements And Required Capabilities n/a 5.0 Eligibility the Applicable Naics Code For This Requirement Is 336412, Aircraft Engine And Engine Parts Manufacturing With A Small Business Size Standard Of 1,500 Employees. the Product Service Code Is J028, Maint/repair/rebuild Of Equipment- Engines, Turbines, And Components businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size In Their Capabilities Statement. Note: Far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance. Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far). to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics That You As The Prime Would Assign For Their Workshare. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In The Sources Sought Notice (ssn) In Order To Assist The Government’s Capability Determination. 6.0 Submission Requirements a. Interested Parties Should Address The Following Questions In Their Response. The Responses To These Questions Will Aid The Government In Determining Whether A Company Is Capable In Performing The Requirement, So It Is Important To Address These Areas With Specific Details: what Similar Corporate Experience In Maintaining, Repairing, Rebuilding, And Testing Aircraft Engines Does Your Firm Possess? What Similar Experience In Complex Supply Management Does Your Firm Possess? what Is Your Firm’s Approach To Data Rights Mitigation To Support This Requirement? is Your Firm As9100d And/or Iso9000/1400 Certified? what Engineering Resources Does Your Firm Have Available To Support Engine Maintenance And Manufacturing Operations? What I And D Level Resources (both Management And Front Line Maintainers) Does Your Firm Have Available To Support Engine Maintenance Operations? does Your Firm Have Experience In Using Navy Maintenance And Supply Software? please Note That Under A Small-business Set-aside, In Accordance With Far 52.219-14, The Small Business Prime Must Perform At Least 50% Of The Work Themselves In Terms Of The Cost Of Performance. Provide An Explanation Of Your Company’s Ability To Perform At Least 50% Of The Tasking Described In This Pbsow For The Base Period As Well As The Option Periods. Similarly Situated Small Businesses May Team Together To Meet The 50% Requirement. If Your Company Is Planning To Team With A Similarly Situated Small Business, The Response Must Clearly Identify The Proposed Team Members And The Capability Statement Must Clearly Articulate Which Portion Of The Work Each Team Member Will Be Responsible For. The Response Must Be Detailed Enough For The Government To Make A Determination Whether Or Not The Proposed Team Will Be Able To Perform 50% Of The Work When Combined. provide A Statement Including Current Small/large Business Status And Company Profile To Include Number Of Employees, Annual Revenue History, Office Locations, Unique Entity Identifier (uie) Number, Etc. respondents To This Notice Also Must Indicate Whether They Qualify As A Small, Small Disadvantaged, Women-owned, Hubzone, Or Service Disabled Veteran-owned Small Business Concern Under The Naics Code Identified For This Requirement. b. Interested Parties Shall Adhere To The Following Instructions For The Submittal Of Their Capabilities Statements: page Limit And Format: Ten (10) 8.5 X 11 Inch Pages In Times New Roman Font Of Not Less Than 10 Point. document Type: Microsoft Word Or Adobe Pdf Are Acceptable delivery: Email To Contracting Officer, Thomas Conrow (thomas.w.conrow.civ@us.navy.mil), Contract Specialist Erin Allison (erin.e.allison.civ@us.navy.mil), And Contract Specialist Lcdr Ronald Parry (ronald.r.parry1@navy.mil) response Date: Responses Are Due By 2:00pm Est Or Edt On 17 January 2025. no Classified Information Shall Be Submitted In Response To This Sources Sought. no Phone Calls Will Be Accepted. all Questions Must Be Submitted Via Email To The Contract Specialist Named Above all Responses Shall Include Sources Sought Notice Name/number, Company Name, Company Address, Company Business Size, And Points Of Contact (poc), Including Names, Phone Numbers, And Email Addresses. all Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Fully Protected From Any Release Outside The Government. any Information Or Materials Provided In Response To This Sources Sought Notice Will Not Be Returned. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To This Sources Sought Notice.

Details: Update: 18 Dec 2024 response Due Date Change To 31 Jan 2025 @ 5:00pm Cst update: 27 Nov 2024 redacted/edited Version Of The Slide Deck From The 30 October Industry Day File Name "jbsa Industry Day Slide Deck 20241030" update: 19 Nov 2024 following The Industry Day, Saf/ieip Is Considering Revising The Rfi. The Revision Would Provide Additional Specificity And Explain The Daf Requirements In More Detail. We Have Developed A Series Of Questions (attached) But Would Appreciate Any Additional Input From Industry Regarding Technical Approach, Corporate Finance Capability, And Past Performance. Please Send Any Additional Quesitons. The Recording With The Attendee List Is Also Attached. 1.0 Description 1.1 The Air Force Installation Contracting Center (aficc) 772nd Enterprise Sourcing Squadron (772 Ess), In Support Of The Air Force Installation And Mission Support Center (afimsc) Under The Department Of The Air Force (daf), Is Conducting A Market Survey To Determine Commercial And Industry Capabilities And Practices As Well As Solicit Comments About The Rfi And Attached Documents. This Request For Information (rfi) Is Regarding The Strategic Real Estate Opportunities (sreo) Initiative In Support Of Six (6) Major Innovation (opportunity) Plans At Jbsa. The Purpose Of This Rfi Is To Gain Knowledge About Interest, Capabilities, And Qualifications Of Various Members Of Industry. 1.2 This Is A Request For Information Only. This Rfi Is A Market Research Tool Issued To Determine The Availability And Adequacy Of Potential Business Sources For The Daf’s Information And Planning. It Is Not A Request For Proposal (rfp) Nor Is It A Notice Of The Government’s Intent To Issue An Rfp In The Future. This Rfi Does Not Commit The Government To Contract For Any Services Whatsoever. Furthermore, The Government Is Not At This Time Seeking Proposals And Will Not Accept Unsolicited Proposals. Responders Are Advised That The Government Will Not Pay For Any Information Provided Or Administrative Costs Incurred In Response To This Rfi. All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party’s Expense. Not Responding To This Rfi Does Not Preclude Interested Parties From Submitting Proposals For A Future Rfp If One Is Issued. If Any Solicitations Are Issued, It Will Be Synopsized On The System For Award Management (sam) Website, Www.sam.gov. It Is The Responsibility Of Potential Offerors To Monitor This Website For Additional Information Pertaining To This Requirement. 2.0 Background there Is A Recognition Among Senior Leaders That The Daf Cannot Afford To Adequately Maintain Its Current Infrastructure Portfolio, Which Can Cost Upwards Of 10% Of The Total Daf Budget. To Address This Challenge, Csaf Directed Saf/ie In Jan 2023 To Develop An Enterprise-level Approach To Identify And Execute 2-3 Large Strategic Real Estate Actions Fat Daf Installation. Each Sreo Pilot Project Is Intended To Significantly Reduce Costs Associated With Operating And Maintaining Daf Installations. 3.0 Subject saf/ieip Is Working With The 772nd To Identify Potential Sreo Opportunities At Joint Base San Antonio. The Rfi Was Developed In Collaboration With The 772nd And Other Daf Stakeholders. This Rfi Is Soliciting Interest For Potential Development, Re-development, Or Lease Of Underutilized Real Estate And Facilities Located On Jbsa. The Goal Of This Rfi Is To Achieve Compatible Development Which Meets The Mutual Needs Of The Daf And Nearby Communities. The Daf Desires To Engage Industry To Obtain Information And Levels Of Interest To Help The Government Prepare A Course Of Action For Jbsa. This Rfi Will Also Help To Identify U.s. Domestic Entities Interested In Utilizing Existing Title 10 Authorities To Develop Facilities In Support Of The Daf Mission At Jbsa. Prior To Entering Into Any Agreement(s) For Use Of Real Estate Or Facilities, Daf Will Evaluate Ownership And Control Options (fee Simple, Transfer, Lease, Etc.) For The Real Estate And/or Facilities. disclaimer: This Posting Is Issued Solely For Conducting Market Research And Planning Purposes To Determine Qualified And Interested Potential Sources And Does Not Constitute A Solicitation. Neither Unsolicited Quotes Nor Any Other Kind Of Offers Will Be Considered In Response To This Posting. Responses To This Posting Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Respondents Are Solely Responsible For All Expenses Associated With Responding To This Posting. The 772 Ess/pks Or Saf/ieip Will Not Entertain Any Questions Concerning The Composition, Requirements, Or The Nature Of Services To Be Performed Under Any Upcoming Solicitation For Related Services. The Daf Reserves The Right To Cancel This Rfi At Any Time. 4.0 Scope saf/ieip Is Working With The 772nd To Identify Potential Sreo Opportunities At Jbsa. The Rfi Was Developed By Saf/ieip In Collaboration With The 772nd And Other Daf Stakeholders. This Rfi Is Soliciting Interest For Potential Development, Re-development, Or Lease Of Underutilized Real Estate And Facilities Located On Jbsa. The Goal Of This Rfi Is To Achieve Compatible Development Which Meets The Mutual Needs Of The Daf And Nearby Communities. Jbsa Has Identified Areas Of Opportunities Considered For Redevelopment And/or Recapitalization. Further Details Are Provided Below Outlining Each Opportunity Which May Be Considered Individually Or In Any Combination Considered Feasible By Industry. Any Redevelopment Of Jbsa Property Must Comply With The Land Use Restrictions And Requirements Contained In The Jbsa Idp And The Air Installations Compatible Use Zones (aicuz), Which Are Intended To Promote Public Health And Safety Through The Local Adoption Of Compatible Land Use Controls And To Protect The Operational Capability Of Jbsa. Proposals Must Also Comply With Relevant Policy, Laws And Regulations, To Include 32 Cfr 989, Environmental Impact Analysis Process. under Existing Authorities (e.g. Venture Capital Investment, Real Estate Development, Power Purchase Agreements, Energy Assurance Leases, Or A Conglomeration), The Daf Is Considering Making Available For Use Six (6) Opportunities That Include Parcels Of Land, Facilities / Assets Considered Non-excess Real Property At Jbsa, San Antonio, Texas, Under The Authority Of Title 10, United States Code. This Authority Allows For Military Departments To Out Lease Land Or Facilities, Or Grant Easements To A Private Or Public Entity, On A Long-term Basis Where Payment In-kind Or Cash Considerations Are Received In Exchange For Use Of The Property. The Six (6) Opportunities Are Further Defined In The Opportunities Attachment Of This Rfi. 5.0 Performance Requirements there Are Six (6) Major Potential Areas On Opportunities To Be Considered At Follows: opportunity 1: Cyber Security Center opportunity 2: Kelly Airfield opportunity 3: Parade Field Redevelopment opportunity 4: South Beach Renovation opportunity 5: Energy Resiliency, Medical Education And Training Campus (metc) Housing Redevelopment opportunity 6: General Call For Additional Opportunities the Attachment Entitled, “opportunities” Is Hereby Attached And Explains The Six Potential Opportunities In More Detail, Which Includes Diagrams/maps And Related Attachments. 6.0 Submissions any Interested Responsible Party Believes It Is Equally Or Otherwise Uniquely Capable Of Meeting The Opportunity Requirements Described In This Request For Information (rfi), Shall Hereby Submit A Capability Statement To Include The Following Criteria Address Below. the Response Should Describe The Company’s Capability To The Following: Technical Approach describe Your Organization’s Qualifications To Provide A Concept In Response To This Rfi. provide A Statement Articulating The Overall Concept And Approach For Development, Operations, As Well As How It Aligns With Market Opportunities provide The Proposed Technical Approach, Including A General End-to-end Integrated Concept Of Operations total Occupancy Headcount, Anticipated Timeline For Real Estate/facility Utilization, Any Other Jbsa Assets Necessary For Successful Project Execution, Facilities, Or Land Use Needed To Support The Concept Of Operations, In Addition To, Frequency And Duration Of The Anticipate Use. include Any Potential Construction And Timeframe For Proposed Development. describe The Expected Activities To Occur At The Real Estate And Facilities, Anticipated Security Requirements, And Any Planned Periods Of Inactivity On The Projected Schedule For Use Of The Real Estate And Facility/facilities. modifications describe Any Modifications To The Real Estate And Associated Facility/facilities That May Be Required And An Anticipated Timeframe For Making Such Modifications. proposed Modifications To The Real Estate And Associated Facility/facilities Will Require Daf Review And Compliance With Existing Federal Laws. Approval By Daf And Jbsa Will Ensure Compatibility With Existing Programs And Compliance With Applicable Building Codes. Limitations, Restrictions, And Impact describe Any Limitations, Restrictions, And Impacts On Other Occupants Of Jbsa, Including Such Effects On Other Occupants, And Any Risk Mitigation Measures To Facilitate Concurrent Utilization Of Real Estate And Associated Facilities At Jbsa. Examples Include Construction Timelines, Staging Of Materials, Noise Impacts, Etc. Corporate Financial Capability provide Financial Plan Which Reflects The Amount Of Funding For Project Requirements, Objectives, And Priorities To Successfully Achieve And Sustain The Described Operations And Level Of Financial Commitment To Implement The Proposed Technical Approach. Include The Potential Sources Of Funding (venture Capital, Bonds, Commercial Lending, Etc.). Prior Experience describe Experience With Developing Real Estate And Facilities In The State Of Texas And/or The City Of San Antonio. Include Descriptions Of Past Experience Working In Collaboration With The Federal Government. Include A List With At Least Two (2) And No More Than Five (5) Projects That You Have Successfully Completed Within The Past Ten (10) Years, Or Will Complete By 31 December 2024, Which Are Of Comparable Magnitude And Complexity To The Proposed Use Of Any Of The Identified Opportunities Outlined In This Rfi. identify The Types And Total Number Of Commercial And Government Customers. Questions please Provide Any Additional Questions, Comments, Concerns, Etc., Concerning This Rfi If Applicable. Answers To Such Questions Will Be Provided Accordingly. Any Questions Concerning What Will Be The Type Of Composition, Requirements, Solicitation Or Contract As It Relates To This Rfi Will Not Be Address. Format responses Should Not Exceed Twenty (20) Pages. Please Include Attachments (maps, Figures, Financial Details, Etc.) And Appendices With Necessary Supporting Details. These Attachments And Appendices Will Not Be Included In The Page Limit. Due To Email Size Limits, Please Limit Emailed Responses And Attachments To 20 Mbs. Font Should Be Times New Roman, Size 12. respondents Are Encouraged To Limit The Amount Of Proprietary Data (defined Below) Included In Their Response, And Only Include Such Information That Is Necessary To Respond To This Inquiry. Any Proprietary Data Must Be Clearly Marked. For Purposes Of This Rfi, “proprietary Data” Means Data Embodying Trade Secrets Developed At Private Expense Or Commercial Or Financial Information That Is Privileged Or Confidential, And That Includes A Restrictive Notice, Unless The Data Is: Known Or Available From Other Sources Without Restriction; Known, Possessed, Or Developed Independently, And Without Reference To The Proprietary Data; Made Available By The Owners To Others Without Restriction; Or Required By Law Or Court Order To Be Disclosed. With Respect To Such Proprietary Data, Daf Shall: a. Use, Disclose, Or Reproduce Such Proprietary Data Only As Necessary To Evaluate The Response. b. Safeguard Such Proprietary Data From Unauthorized Use And Disclosure. c. Allow Access To Such Proprietary Data Only To Companies, Including Employees And Contractors, Requiring Access For Purposes Of Evaluating The Rfi Responses. d. Preclude Disclosure Outside Daf. e. Notify Its Employees With Access About Their Obligations Under This Rfi And Ensure Their Compliance. f. Dispose Of Such Proprietary Data After Evaluation Of The Rfi Has Concluded. 7.0 Industry Day an Industry Day Will Be Held At San Antonio Water System (saws) Headquarters, Located At 2800 Us Hwy 281 N San Antonio, Tx 78212 From 1:00 Pm To 4:00 Pm On Wednesday, October 30, 2024. Directions To The Site Can Be Found In The Pdf Document (as Reference In Saws Hq Attachment.) Daf Does Not Intend To Reply To Individual Responses, But Reserves The Right To Conduct Additional Market Research, Which May Include Later Communications With Respondents Or At An Industry Day Held At Jbsa. Daf Will Not Provide Information Concerning Or Developed In The Course Of Its Deliberative Process. There Is No Registration Requirements To Attend. At This Time We Are Not Accepting Request To Present Any Material. 8.0 Responses – Point Of Contact please Send Comments And Questions To Saf.jbsa.sreo@us.af.mil. Comments And Questions Should Be Directed To The Pocs Listed Below In The Subject Line Of Your Email. Any Responses To Questions Posed By External Parties Will Be Posted For Public Review. for Opportunities 1-4 Or A New Opportunity Not Identified In This Rfi, Please Direct Your Email To Lt Col Raymond Elmore, Ms. Laura Yates, And Mr. Paul Holland. for Opportunities 5a And 5b, Please Direct Your Email To Mr. Jake Gilman And Mr. Michael Lovell. all Responses Must Be Provided By Email To The Daf Point Of Contact No Later Than 5:00 Pm Eastern Time On 31 January 2025. Send All Responses To Saf.jbsa.sreo@us.af.mil. No Other Forms Of Transmission Are Requested Or Will Be Accepted. the Government Will Not Pay For Any Material Provided In Response To This Notice Nor Return The Data Provided. Daf Will Use The Rfi Responses To Define Requirements And Gauge Market Interest In Using The Real Estate And/or Facility/facilities And Determine Whether It Is In The Government’s Best Interest To Issue A Competitive Rfp.

Details: The Following Is A Sources Sought Notice. This Sources Sought Is Seeking To Identify Qualified Sources Under North American Industry Classification System (naics) 541330, Engineering Services(a-e) Services. This Sources Sought Announcement Is For Market Research Information Only And Is To Be Used For Preliminary Planning Purposes. No Sf330s Are Being Requested And None Will Be Accepted In Response To This Notice. This Is Not A Solicitation For Proposals, And No Contract Will Be Awarded From This Notice. This Sources Sought Announcement Will Not Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Cost Incurred In Preparation Of A Response To This Notice. these Services Will Be Procured In Accordance With 40 U.s.c. Chap 11, Selection Of Architects And Engineers (formerly Known As The Brooks Architect Engineer Act) As Implemented In Far Subpart 36.6 And Dfars Subpart 236.6. the U.s. Army Corps Of Engineers (usace) Kansas City District (nwk) Seeks Qualified Ae Firms Interested And Capable Of Providing An Array Of Design Services For The Department Of Veteran's Affairs (dva) John Cochran Medical Center (jcmc) Located At 915 N Grand Blvd, St. Louis, Mo 63106. The Government Is Contemplating An Unrestricted (ur), A-e, Single Award Task Order Contract (satoc), Indefinite Delivery Contract Solicitation. The Estimated Ordering Limitation Of All Task Orders Issued Under The Satoc Will Have A Maximum Ordering Capacity Of One Hundred Million ($100,000,000.00) Dollars. The Base Ordering Period For This Contract Will Be Five (5) Years With One Option To Extend The Ordering Period For An Additional Five (5) Years. It Is Anticipated That A Solicitation Announcement Will Be Published In The Procurement Integrated Enterprise Environment In The 2nd Quarter Of Fy2026. firms Must Be Capable Of Performing Work To Support The Planning, Design, And Construction Phase Services For The Construction Of A New Health Care Facility And Supporting Facilities. Firms Must Be Capable Of Progressing The Current Conceptual Schematic Design Using The Collaborative Integrated Design And Construction (idac) Project Delivery Method. Idac Is A Usace Alternative Early Contractor Involvement (eci) Delivery Method That Requires Extensive Collaboration Between The Owner, Designer Of Record (dor), And Construction Manager / General Contractor. The A-e Collaboration Requirements Include Continuous Open Team Communication; Partnering; Willingness For The A-e To Incorporate Alternative Designs And Materials And Include Changes To Schedule; Phasing Plans; Specifications; Means And Methods Of Construction Throughout The Collaborative Design Progression Period That Takes Place During The Construction Contractor’s Preconstruction Phase Services. A Summary Of The Idac Delivery Method Is Attached To This Announcement. required Services May Include The Preparation Of Special Reports; Planning And Design Charrettes; Studies; Development Of Design Criteria For Performance Contracts; Design Of Construction; Documenting Basis Of Design; Developing, Updating, And Reconciling Construction Cost Estimates. The Task Orders May Include But Are Not Limited To Design Work Involving Site Investigation, Geotechnical Reports, Topographic Surveys, Preparation Of Contract Drawings, Technical Specifications, Design Analyses, Life Cycle Cost Analyses, And Continuous Real-time Computer Aided Cost Estimating And Cost Reconciliation With Third Party Estimates. Electronic Security System Design, Anti-terrorism/force Protection Design, Progressive Collapse, Seismic Design, Cyber Security, And Network Engineering May Be Required. Resiliency, Reliability, And Sustainability Will Be Important Considerations. total Building Commissioning, With A Perspective As Designer May Be Required. Construction Phase Services, Including Shop Drawing Review, Design During Construction, Site Visits, Etc., Could Be Included In Task Orders. Building Information Modeling (bim) Technologies, Cadd And Gis Deliverables May Be Required. Specific Requirements Will Be Determined Based Upon Project Requirements And Described In Each Task Order. Project Assignments Will Typically Require Performance In An Office Setting And On-site. the Kansas City District Is Soliciting Feedback From Industry As Part Of Our Market Research Efforts Associated With This Acquisition And Is Considering Various Acquisition Strategies To Deliver This Project And Requests Input From Industry. The Following Information Is Requested In This Sources Sought (ss) Announcement With A Limit Of Ten (10) Pages For Your Response: 1. Organization Name, Address, Email Address, Website Address, Telephone Number, Business Size (small Or Large), And Type Of Ownership For The Organization; Include Uei Number And Cage Code. 2. Firm's Interest In Providing An Sf330 On The Pending Solicitation Once Issued. 3. Experience: A. Evidence Of Capabilities To Perform Work Comparable To That Required For This Project (e.g. Design Of Medical Facilities And Ancillary Structures Providing A Wide Variety Of Patient Care Services, Design Of A Campus Requiring Phased Demolition And Phased Construction, Design Of Facilities Utilizing The Dva's Technical Information Library). B. Provide Three Recent Relevant/comparable Projects (not More Than Ten Years Old). Include The Project Name; Dollar Value Of The Project; Description Of The Key/salient Features Of The Project And Those That Demonstrate Similarity To The Work Required Under The Proposed Satoc; Identify The Contracting Office & The Customer/user (include Poc Information); And Identify/discuss The Acquisition Method (e.g., Sealed Bid, Best Value), Contract Type (e.g., Firm Fixed Price, Fixed Price Incentive Successive Targets [fpis], And Delivery Method (e.g., Integrated Design And Construction [idac],guaranteed Maximum Price [gmp], Design-bid-build, Design-build, Early Contractor Involvement [eci], Construction Manager As Constructor [cmc], Etc.). Responses Should Address The Firm's Capability To Construct A Hospital Or Medical Center Facility And The Challenges Associated With Large, Complex Medical Facilities. 4. Identify If, Based Upon The Scope Of This Project, You Would Form A Joint Venture To Execute This Work. Provide Joint Venture Information, If Applicable, Including Uei And Cage Code. 5. Provide The Firms Plan To Include Small Business Participation To The Maximum Extent Practicable. a Virtual Industry Day Is Planned For Thursday, December 19, 2024 At 1100 Cst. Webex Login Information Is Listed Below: 1. Join From The Meeting Link Below: https://usace1.webex.com/usace1/j.php?mtid=m5e4d4e7380c3b0f3d4796025d738aa1d 2. Join By Meeting Number Below: meeting Number (access Code): 2827 328 3747 meeting Password: N4ppp75cyc* 3. Join From A Mobile Device (attendees Only) +1-844-800-2712,,28273283747## Us Toll Free +1-669-234-1177,,28273283747## Us Toll 4. Join By Phone +1-669-234-1177 Us Toll +1-844-800-2712 Us Toll Free global Call-in Numbers | Toll-free Calling Restrictions 5. Join From A Video System Or Application dial 28273283747@usace1.webex.com you Can Also Dial 207.182.190.20 And Enter Your Meeting Number. please Send Your Sources Sought Responses Via Email To Ines.necker@usace.army.mil. Submissions Should Be Received By 11 A.m. Cst, January 6, 2025. this Synopsis Is For Market Research Purposes Only And Is Not A Request For An Sf330 Nor Does It Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Costs Incurred In Preparation Of A Response To This Notice.

Details: (corrected) Public Notice Soq 24-039 The Parish Of Jefferson, Authorized By Resolution No.145367 Is Hereby Soliciting Statements Of Qualifications (tec Professional Services Questionnaire) From Persons Or Firms Interested And Qualified To Provide Professional Engineering Services Related To The Design And Construction Of The 6th Street Bridge At Keyhole Canal (council District 2). Deadline For Submissions: 3:30 P.m., January 9, 2025 General The Scope Of Work Associated With This Project Consists Of The Replacement Of The 6th Street Bridge At Keyhole Canal And Incidental Work As Needed. Project May Include The Following Supplemental Services: Load Rating In Accordance With The Ladotd Bridge Design And Evaluation Manual, Surveying, And Geotechnical Services. Compensation Compensation For The Required Design Services Will Be Made On An Hourly Rate Basis Or A Fixed Fee Basis, Or A Combination Of Both, Depending On Scope And Complexity Of The Work. The Parish Reserves The Right To Determine The Method Of Payment (hourly Or Fixed) For Each Individual Assignment. For Hourly Rate Work, The Firm Shall Be Compensated By The Appropriate Jefferson Parish Department On The Basis Of Their Certified And Itemized Burdened Rate In Accordance With Guidelines Established In The Ldotd Standard Rates Contained In Attachment “a” To The Standard Professional Services Agreement For Jefferson Parish. A Copy Of Attachment “a” May Be Obtained By Calling The Jefferson Parish Department Of Capital Projects At (504) 736-6833. For Fixed Fee Work, The Fee Shall Be Negotiated With The Firm By The Jefferson Parish Department Of Engineering And Shall Be Mutually Agreeable To Both Parties. Compensation For Supplemental Services, If Required, Shall Be In The Form Of A “lump Sum” Or Hourly Rate For Each Supplemental Service, Which Shall Be Mutually Agreeable To The Parish And The Consultant. All Costs Associated With This Project Shall Be Subject To Jefferson Parish Review And Approval. Minimum Requirements For Selection 1. The Persons Or Firms Under Consideration Shall Have At Least One (1) Principal Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana. A Subcontractor May Not Be Used To Meet This Requirement. (section C. Of Tec Professional Services Questionnaire); 2. The Persons Or Firms Under Consideration Shall Have A Professional In Charge Of The Project Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana With A Minimum Of Five (5) Years’ Experience. A Subcontractor May Not Be Used To Meet This Requirement. (section K. “professional In Charge Of Project:”; Of Tec Professional Services Questionnaire); 3. The Persons Or Firms Under Consideration Shall Have One (1) Employee Who Is A Licensed, Registered Professional Engineer In The State Of Louisiana In The Applicable Discipline Involved. A Subcontractor May Meet This Requirement Only If The Advertised Project Involves More Than One Discipline (section D. Of Tec Professional Services Questionnaire). With Regard To The Questionnaire, Principal Means The Sole Proprietor Of The Firm, Or One Who Shares An Ownership Interest With Other Persons In The Firm, Including But Not Limited To, A Partner In A Partnership, A Shareholder In A Corporation, Or A Member Of A Limited Liability Corporation. Evaluation Criteria The Following Criteria Will Be Used To Evaluate Each Firm Submitting A Statement Of Qualifications: 1) Professional Training And Experience In Relation To The Type And Magnitude Of Work Required For The Particular Project - 35 Points; 2) Size Of Firm, Considering The Number Of Professional And Support Personnel Required To Perform The Type Of Engineering Tasks, Including Project Evaluation, Project Design, Drafting Of Technical Plans, Development Of Technical Specifications And Construction Administration – 10 Points; 3) Capacity For Timely Completion Of Newly Assigned Work, Considering The Factors Of Type Of Engineering Task, Current Unfinished Workload, And Person Or Firm’s Available Professional And Support Personnel. – 20 Points; 4) Past Performance On A Project In Which The Person Or Firm Assisted A Governmental Entity In Dealings With Disaster Recovery And Any Other Projects Relating To Cdbg - 10 Points (respondent Should Provide A List Of Completed Disaster Recovery Projects And/or Similar Cdbg Projects For Which Firm Has Provided Verifiable References. 5) Location Of The Principal Office - 15 Points (preference Shall Be Given To Persons Or Firms With A Principal Business Office As Follows: (a) Jefferson Parish, Including Municipalities Located Within Jefferson Parish (15 Points); (b) Neighboring Parishes Of The Greater New Orleans Metropolitan Region, Which Includes Orleans, Plaquemines, St. Bernard, St. Charles And St. Tammany Parishes (12 Points); (c) Parishes Other Than The Foregoing (10 Points); (d) Outside The State Of Louisiana (6 Points).) Location Of The Principal Office Shall Only Factor Into The Evaluation Criteria If Adequate Competition (two Or More Firms That Are Responsive And Responsible) Are Located Within Jefferson Parish; 6) Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services, In Which The Parish Prevailed Or Any Ongoing Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services Excluding Those Instances Or Cases Where The Person Or Firm Was Added As An Indispensable Party, Or Where The Person Or Firm Participated In Or Assisted The Public Entity In Prosecution Of Its Claim - 15 Points (in The Event That The Person Or Firm Fails To Provide Accurate And Detailed Information Regarding Legal Proceedings With The Parish, Including The Absence Of Legal Proceedings, The Person Or Firm Shall Be Deemed Unresponsive With Regard To This Category, And Zero (0) Points Shall Be Awarded.); 7) Prior Successful Completion Of Projects Of The Type And Nature Of Engineering Services, As Defined, For Which Firm Has Provided Verifiable References - 5 Points; Project Will Include Federal Disaster And Resiliency Funds And Therefore Will Include Associated Federal Requirements, Including Section 3, As Applicable. Statements Of Qualifications From Minority, Female-owned, And Local Firms / Individuals Are Invited. Each Firm’s Lowest And Highest Score Shall Be Dropped And Not Count Towards The Firm’s Score. Only Those Persons Or Firms Receiving An Overall Cumulative Score Of At Least Seventy (70) Percent Or Greater, Of The Total Possible Points For All Categories To Be Assigned By The Participating Technical Evaluation Committee Members Shall Be Deemed Qualified To Perform These Professional Services. All Firms (including Sub-consultants) Must Submit A Statement Of Qualifications (tec Professional Services Questionnaire). Please Obtain The Latest Questionnaire Form By Calling The Purchasing Department By Telephone At (504) 364-2678 Or Using Our Web Address: Https://www.jeffparish.gov/27/government. This Questionnaire Can Be Accessed By Clicking On The + Next To “doing Business In Jefferson Parish” On The Website And Clicking On “professional Services Questionnaires”. Submissions Will Only Be Accepted Electronically Via Jefferson Parish’s E-procurement Site, Central Bidding At Www.centralauctionhouse.com Or Www.jeffparishbids.net. Registration Is Required And Free For Jefferson Parish Vendors By Accessing The Following Link: Www.centralauctionhouse.com/registration.php. The Firms Submitting A Statement Of Qualifications (tec Professional Services Questionnaire) Must Identify All Sub-consultant Firms Which They Expect To Use To Provide Professional Services, And Submit A Statement Of Qualifications (jefferson Parish Tec Professional Services Questionnaire) For Each Sub-consultant Firm. (refer To Jefferson Parish Code Of Ordinances, Section 2-928). No Submittals Will Be Accepted After The Deadline. Affidavits Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Insurances Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Disputes/protests Relating To The Decisions By The Evaluation Committee Or By The Jefferson Parish Council Shall Be Brought Before The 24th Judicial Court. Adv: The New Orleans Advocate: December 4, 11, 18 And 25, 2024

Details: The Medical Technology Enterprise Consortium (mtec), In Support Of The U.s. Army Medical Research And Development Command (usamrdc), And Defense Health Agency (dha), Is Excited To Post This Request For Project Information (rpi) Focused On Surveying The Current Manufacturing Capabilities Of Single Blood Donor/storage Bags Within The Bounds Of The Contiguous United States. purpose Of The Project Information Paper: this Request For Project Information (rpi) Contains Background Material And Guidance For The Preparation Of Project Information Papers To Mtec. Project Information Papers Will Be Reviewed By The Sponsor And Used In A Manner That Shapes Dha Efforts In This Technology Space. The Results Of The Project Information Paper Submission Will Serve To Assess The Development Landscape And Potentially Focus Efforts That Will Follow. as A Note: This Rpi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. Neither Unsolicited Proposals Nor Any Other Kind Of Offers Will Be Considered For Award In Response To This Rpi. Responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rpi. All Information Received In Response To This Rpi That Is Marked “proprietary” Will Be Handled Accordingly. focus Area Of Interest: in Accord With The Department Of Defense (dod) 2022 National Defense Strategy Identifying Building Enduring Advantages, There Is An Effort To Invest In Manufacturing Capabilities Within The Continental United States (conus) As Part Of Efforts To Bolster The Defense Industrial Base (dib) And Securing Domestic Supply Chains. In Recent Years, There Has Been A Shortage Of Much needed Blood Storage Bags, And This Is Acute Within The Dod System Where There Is A Requirement For Singly Wrapped Blood Bags For Use In Far Forward Situations. “today’s Dib Requires Additional Investment From Private And Government Sources To Modernize Infrastructure And Capacity To Provide Military Capabilities At The Speed And Scale Necessary For The U.s. To Prevail In A Near‐peer Conflict. To Adapt And Fortify Our Existing Capabilities And Capacities, The Department Needs To Focus On Investment And To Buy Down Supply Chain Risk And Expand Capacity.” dod’s Diverse Warfighting Capabilities Means That Sailors, Marines, Soldiers, Airmen, Guardians And Joint Special Operations Service Members Operate In A Vast Array Of Challenging, Remote, And Austere Environments. In Forward Positions There Is A High Probability Of Traumatic Injury And Wounds Leading To Blood Loss. Hemorrhage Is The Leading Cause Of Death In Combat Zonetrauma. The Gold Standard For Immediate Treatment Of Hemorrhage Is Transfusion Of Whole Blood However, The Availability Of Whole Blood And Conventional Blood Products On Forward Missions Is Challenging. In Recent Years There Have Been Supply Chain Disruptions Across The Continuum Of Military And Civilian Products. This Includes Components Used In The Manufacture Of Blood Bags From The Polymer Components To The Anticoagulant/preservative Solutions Within The Bag. This Has Resulted In Shortages Of Single Blood Storage Kits Most Often Used In Austere Environments Especially For Walking Donors. According To The Us Food And Drug Administration center For Biologics Evaluation And Regulation For Regulated Products Shortages Website, The Shortage Of Series Of Blood Collection Bag Kits And Products Is Described As Ongoing. Shortages Of Ingredients, Components And Manufacturing Supplies, And Release Timing Issues Are Intermittent And Unpredictable. Product May Be Placed On Allocation As Necessary To Manage Reduced Or Unavailable Supply. This Vital Product Is Needed In Steady Supply To Meet The Needs Of Aiding Wounded Warriors Within The Golden Hour, Or Sooner, Out In The Field At The Point Of Injury With Donated Blood. Our Approach Is To Stand Up Or Bolster Domestic Production. the Government Seeks Project Information Papers Regarding The Development Of A Prototype System Detailing The Following: production Of A Bag Within The Contiguous United States Within 2 Years Of Award That Meets The Following Existing Specification: individually Wrapped Single Aseptic Collection Bag compliant With Fda (21 Cfr 864.9100), Iso 10993 And 3826, Usp And Mil 810h Standards And Guidance. supports Whole Blood Donor Phlebotomy Of 500ml (+/‐10%, 450‐550 Ml) Or 450 Ml (+/‐10%, 405‐495 Ml). contains A Solution Of Anticoagulant And Preservatives Meeting The Usp Standards That Allows For Storage Of Blood For At Minimum 21 Days Up To 35 Days. foil Wrapping That Is Easy To Open Requiring No Tools And If Practical, Textured For Better Grip With Brightly Marked Notches Not Only At The Corners But Also In The Center Of The Packaging. the Manufactured Bags Should Have A Shelf Life Of 18 ‐ 24 Months At Room Temperature. appropriate Fatigue And Distortion Testing. experience Designing Medical Devices Specifically Blood Products And Adhering To Verification And Validation Guidance. within 2 Years, Capability To Manufacture No Less Than 10,000 Standard Blood Donor/storage Bags Per Year And Have A Surge Capability Plan During Times Of Increased Demand For Full Single Blood Bag Kits With Compliant Materials And Processes. any Established Current Good Manufacturing Practice (cgmp) Ready Methods With Fully Designed Hardware And Functional Disposables. manufacturers Implementing Gmp That Require Financial Assistance To Meet All Requirements Of The U.s. Food And Drug Administration (fda) With Clear Standardoperating Procedures And Compliance Documentation (21 Cfr 864.9100) Shall Provide Appropriate Substantiating Information, Including A Workflow For Obtaining Gmp Certification. demonstrable Redundancy In Sourcing Of Raw Materials From Multiple Vendors. a Notional Rough Order Of Magnitude Estimate Of Proposed Program Cost Inclusive Of Any Cost Share And Other Funding Sources That The Offeror Has Secured. requirements Of The Project Information Paper: project Information Papers Should Clearly Describe Expertise In Each Of The Aforementioned Areas As It Relates To The Manufacturing Of Blood Bags. Interested Parties Are Encouraged To Submit Project Information Papers Using The Template Included In Addendum 1 Of This Rpi. mtec Is Seeking Input From Both Mtec Members And Non‐members Via A Project Information Paper To Be Considered By The Government. Project Information Papers Will Be Shared With The Reviewers Under Non‐disclosure Agreements. project Information Papers May Be Submitted At Any Time During The Submission Period But No Later Than The Due Date And Time Specified On The First Page Of This Rpi Using Bids: Https://submissions2.ati.org/ati2/portal.nsf/start?readform. See Addendum 2 Of This Rpi For Further Information Regarding Bids Registration. Mtec Membership Is Not Required For Submission Of Project Information Paper. mtec: the Mtec Mission Is To Assist The U.s. Army Medical Research And Development Command (usamrdc) And The Defense Health Agency (dha) By Providing Cutting‐edge Technologies And Supporting Life Cycle Management To Transition Medical Solutions To Industry That Protect, Treat, And Optimize Warfighters’ Health And Performance Across The Full Spectrum Of Military Operations. Mtec Is A Biomedical Technology Consortium Collaborating With Multiple Government Agencies Under A 10‐year Renewable Other Transaction Agreement (ota), Agreement No. W81xwh‐15‐9‐0001, With The U.s. Army Medical Research Acquisition Activity (usamraa). Mtec Is Currently Recruiting A Broad And Diverse Membership That Includes Representatives From Large Businesses, Small Businesses, “nontraditional” Defense Contractors, Academic Research Institutions And Not‐for‐profit Organizations. points Of Contact: for Inquiries, Please Direct Your Correspondence To The Following Contacts: technical And Membership Questions Should Be Directed To The Mtec Biomedical Research Associate, Dr. Chuck Hutti, Ph.d., Chuck.hutti@ati.org all Other Questions Should Be Directed To The Mtec Program Manager, Mr. Evan Kellinger, Mtec‐sc@ati.org