Survey Tenders

Details: The U.s. Army Corps Of Engineers, Wilmington District, Is Conducting Research To Determine The Market Capabilities Of Potential Contractors To Provide The Dredge Murden With Up To (90) Days Of Shipyard Repair Services. The Principal Dimensions And Physical Data For The Vessel Are Shown Below: general Description length Overall............................................................................ 156’-2” breadth, Molded........................................................................... 35’ 0” depth, Molded Amidships To Main Deck At Side........................ 10’-9” material (hull And Deckhouse Platform)....................all Welded Steel material (deckhouse)…………………………..all Welded Aluminum gross Tonnage…………................................................... 551 Tons Itc hull Form............................................................…………… Split Hull abs I.d. No. ……………………………………………….. 12222423 the Major Work Scope Includes Dry-docking The Vessel, Cleaning, And Painting The Exterior (including Underneath The Deckhouse) And Interior Of The Vessel, Assisting With Abs And Uscg Required Inspections, And Miscellaneous Modifications And Repairs In Accordance With These Specifications. the Work Scope Also Includes Various Items Required To Satisfy The Requirements Of The American Bureau Of Shipping (abs) With 7-3-2/5 Abs Steel Vessel Rules For Special Periodical Survey No. 3 And 7-6-2/3 Abs Steel Vessel Rules For Machinery Surveys – Survey Requirements/special Periodical Surveys. The Contractor Is Responsible For The Costs Associated With Providing The Inspection Services Of Abs. repair Work Must Be Completed From Brownsville Tx, Along The Intercostal Waterway To Tampa, Florida. Facilities Are Acceptable Located Up To 90 Miles From The Intercoastal Waterway In Any Direction Between These Ports. The Contact Facility Must Be Navigable By The Dredge Allowing For 8’ Of Draft To Transit Safely. certification For The Dry-dock To Be Used To Lift The Plant Shall Be Submitted With The Contractor’s Proposal. The Dry-dock Shall Be Certified For Docking The Plant Of The Dimensions And Weight Given By One Of The Following: (a) Us Navy, Naval Sea Systems Command (b) American Bureau Of Shipping (abs) (c) An Independent Registered Professional Engineer Specializing In Dry-docks, Who Shall Cover The Inspection Requirements Of Item (a) Or (b) Above. the Inspection Certificate Shall Be Within Three (3) Years If The Age Of The Dock Is Less Than Ten (10) Years Old And Within Two (2) Years If The Age Of The Dock Is Over Ten (10) Years Old. the Contract Duration Is Ninety (90) Calendar Days After Delivery Of The Vessel To Contractor’s Yard. The Contractor Is Responsible For Completing All Definite And Indefinite Work Items Within The Ninety (90) Calendar Day Contract Duration. this Solicitation Is A 100% Small Business Set-aside. the Contract Issued Will Be Firm Fixed Price. this Solicitation Will Be Issued In Electronic Format Only And Will Be Available On Or About 10 February 2025. the Quote Due Date Will Be Specified In The Solicitation When It Is Issued. No Additional Media (cd-rom, Floppy Disks, Facsimiles, Etc) Will Be Provided. Paper Copies Of This Solicitation Will Not Be Available. Other Methods Of Requesting A Package Will Not Be Honored. the North American Industry Classification System (naics) Code Is 336611 – Ship Building And Repairing And The Size Standard Is 1,300 Employees. offerors Must Be Registered In The System For Award Management (sam) In Order To Be Eligible To Receive An Award From Any Government Solicitation. Call 1-866-606-8220 For More Information Or Visit The Sam Website At Www.sam.gov. After Completing Sam, In Order To Download Documents Contractors And Their Subcontractors Must Register At Www.sam.gov. In Order To Locate Solicitation, Contractors Can Go To Www. Sam.gov And Search For The Solicitation Number. contractors Can Register To Be Put On A Plan Holders List That Others Can Access Through The Www.sam.gov Website. It Is The Offeror's Responsibility To Check The Internet Address Provided As Necessary For Any Posted Changes To This Solicitation And All Amendments. For Additional Information Or Assistance, Please Contact Diana Curl, Contract Specialist, Phone (910) 251-4915, Email Diana.d.curl@usace.army.mil Or Rosalind Shoemaker, Contract Office, Phone (910) 251-4436, Email Rosalind.m.shoemaker@usace.army.mil.

Description: Expression Of Interest For The Provision Of Multi-disciplinary Consultancy Services [architectural (lead Consultant), Civil & Structural Engineering, Mechanical & Electrical Engineering And Quantity Surveying] For Woodlands Checkpoint Redevelopment Phases 2 And 3 Loading

Details: Contractor Will Provide All Labor, Equipment, Materials, And Supervision Necessary To Remodel The Chapel At The Fort Wayne Vamc. This Will Include But Is Not Limited To The Following. remodel The Fort Wayne Chapel. Demolition As Stated In The Drawings And Specifications. Construction As Stated In The Drawings And Specifications. Adherence To All Infection Control Requirements Given In The Drawings And Specifications. a Non-destructive Hazardous Materials Survey Was Provided In The Project Package. As Such The Contractor May Encounter Other Hazardous Material (asbestos Containing Material, Lead Based Paint) During Demolition. all Work To Be Completed At The Va- Northern Indiana Health Care – Fort Wayne Campus, 2121 Lake Ave., Fort Wayne, In 46805. work To Be Completed Within 183 Calendar Days From Notice To Proceed. *8 Jan 2025 - Specifications Have Been Added To List Of Attachments. *14 Jan 2025 - Amendment A00001 Is Hereby Issued To Establish Rfi Due Date Of 21 January 2025 By 2:00 Pm Est. *6 Feb 2025 - Bid Due Date Has Been Extended To 21 February 2025 At 2:00pm Est. Conference Call In Information Will Be Provided In A Future Amendment. Rfi Responses Are Still Being Gathered, And They Will Be Provided In A Future Amendment. Additional Information Concerning Environmental Requirements Has Been Provided, In Addition To A Copy Of The Site Visit Sign-in Sheet.

Description: Engagement Of Design Consultant / Architect For Surveying,geotechnical,soil Investigation,conceptual Design, Architectural Planning And Drawings, Carrying Out All Related Design And Drawings, Detailed Estimate, And Detailed Project Report (dpr)

Description: Ap-aps-1016-pvc-25-j2 [pl No. 98051301] Scrap Condemned Released Damaged Pvc Flooring Sheets Released From Poh Coaches On As Is Where Is Condition Available Under The Custody Of Sse/cbr/ap. Loc: Available At 1016 Refusal Yard. Ds-8 No. 069164-23-05174 Of 11.03.2024. Ds-8 No. 069164-23-00790 Of 11.06.2024 Ds-8 No. 069164-24-02104 Of 21.08.2024 Ds-8 No. 069164-24-03925 Of 01.01.2025 Note: While Taking Delivery Safety Precautions Has To Be Followed As Per The Instructions Of Safety Officer Cws/ap. Special Conditions: During Delivery, Selection, Sorting, Rejection Of Part Or Partial Lot Will Not Be Entertained. Picking, Disturbing Of Other Nearby Lots, Undefined Materials Near Lot Or Under Lot Formation Materials Will Not Be Entertained. Purchaser May Survey Materials Before Bidding Into Auction, After Successful Bid Further Queries Or Objection Will Not Be Entertained.

Description: Survey, Design, Construction And Commissioning Of Sewerage Network In 161.37 Km Of In West-south Of Bhopal Municipal Area Including Construction Of Sewage

Description: Survey, Design, Construction And Commissioning Of Sewerage Network In 140.18 Km Of In East Of Bhopal Municipal Area Including Construction Of Sewage Treatment Plants And Intermediate Pumping Stations Including Under Package 2

Details: This Presolicitation Notice Has Been Updated To Change The Response Date From 7 February 2025 To 21 February 2025. No Response Is Required. Please Continue To Watch This Presolicitation Notice For Further Updates. the U.s. Army Corps Of Engineers (usace) Walla Walla District Intends To Issue A Construction Solicitation For A Project Titled Little Wood River, Gooding, Idaho. The Work Is Located In Gooding, Idaho. This Will Be A Firm-fixed-price, Design Build Construction Contract. The Magnitude Of Construction Is Between $25,000,000 And $100,000,000. 100% Performance And Payment Bonds Will Be Required. The Government Expects To Award One Contract In October 2025. The North American Industry Classification System (naics) Code For This Project Is 237990 Other Heavy And Civil Engineering Construction And The Associated Small Business Size Standard Is $45 Million. This Solicitation Is Not Set Aside For Small Business, I.e. Unrestricted And Open To Both Small And Large Businesses the Solicitation Will Follow The Two-phase Design-build Selection Procedures As Outlined In Far Subpart 36.3. A Site Visit Will Be Offered During Phase Ii Of The Two-phase Selection Process. Only One Site Visit Is Expected To Be Offered. the Solicitation Is Expected To Be Made Available For Download On The Sam.gov Contract Opportunities Website In January 2025. Offerors Are Responsible For Checking The Referenced Page For Any Updates To The Notice. The Government Is Not Responsible For Any Loss Of Internet Connectivity Or For An Offeror's Inability To Access The Documents Posted At The Referenced Website. Proposals Will Be Due Approximately 30 Days After The Solicitation Is Posted. The Exact Proposal Due Date Will Be Indicated In The Solicitation. system For Award Management (sam): Offerors Must Register In The Sam At Https://sam.gov/content/home Prior To Receiving An Award. point Of Contact For This Procurement Is Preston Jones, Contract Specialist At Preston.e.jones@usace.army.mil all On-site Work Shall Be Performed In Accordance With The Corps Of Engineers Safety And Health Requirements Manual (em 385-1-1). the Contractor Will Be Responsible For Establishing And Managing An Effective On-site Safety And Health Program In Accordance With Em 385-1-1 That Will Require The Development And Submission Of A Comprehensive Project Specific Accident Prevention Plan For Government Acceptance. In Addition, The Contractor Will Be Required To Develop And Submit For Government Acceptance Activity Hazard Analyses For Each Phase Of Work And A Project Specific Fall Protection Plan That Comply With Em 385-1-1. use The Government-furnished Resident Management System (rms) – Contractor Mode To Record, Maintain, And Submit Various Information Throughout The Contract Period. Rms Is A Windows-based Program Capable Of Operating On A Stand-alone Personal Computer Or On A Network. The Government Will Make The Qcs Software Available To The Contractor At Time Of Notice To Proceed. the Project Will Involve The Development And Management Of Contractor Furnished Submittals For Items Such As Pre-construction Plans, Product Data, Test Reports, And Contract Close-out Documentation As Required By The Technical Specifications Of The Contract. summary Scope Of Work design: a 30% Conceptual Design Package Which Conveys The Government’s Design Intent Will Be Provided With The Phase Ii Solicitation. The Design Package Will Include Plans, Specifications, A Geotechnical Exploration Report, And A Recent Site Survey. The Contractor Will Be Responsible For Continuing This Design Package To Completion. Contractor-generated Cad Drawings Must Be In Bentley Dgn Format. construction: proposed Construction Features Are Divided Into Two Primary Categories: (1) Wall Repair/replacement And (2) Vehicle And Pedestrian Bridge Replacement. The Project Is A Lava Rock Wall Channel; The Channel Dimensions Are Approximately 24 Feet Wide, 8 Feet Deep, And 0.9 Miles Long. wall Repair/replacement Work May Include: Mortar Repointing, Concrete Walls, Concrete Blocks, Geotextiles, Drainage Culverts, Irrigation Systems, Fencing, Waterstop Installation, Road Reconstruction, Pavements, And Pavement Striping. bridge Replacement Work May Include: Demolition Of Roadway Culverts, Demolition Of Pedestrian Bridges, Traffic Control, Installation Of New Roadway Bridges, Installation Of New Pedestrian Bridges, And Road Reconstruction. The Bridges Will Include Reinforced Concrete Decks, Railings, Abutments, And Wingwalls.

Description: Framework Agreement For Rope Access Survey, Minor Repairs And Associated Services

Description: Basic Survey On Minimum Wages In 2025, 1 Set