Substation Tenders

Details: The Scope Of Work Under The Subject Package Includes Site Survey, Planning, Design, engineering, Assembly Manufacturing, Testing, Supply, Loading, Transportation, Unloading, insurance, Delivery At Site, Handling, Storage, Installation, Testing, Commissioning, And documentation Of All Items/material Required To Complete The Following Works In The kanpur District Which Inter-alia Include: scada And Smart Technology Works (supply And Erection) supply, Erection And Commissioning Of Rtu, Frtu, Rmu, Sectionalizer, Auto recloser And Other Necessary Component As Per Boq And Site Requirements For implementing Scada System In All Substations And Feeders As Per Model technical Specification Of Rfp. Bidder Shall Also Be Responsible For Integrating All system With Legacy System. supply, Erection And Commissioning Of Distribution Transformer Health Motoring system, Smart Inverter And Other It/ot Equipment As Per Rfp Document. Along with Integrating With Scada And Other Legacy System.

Details: Framework For The Provision Of Supply And Install Of 11kv Switch Gear-the University Of Birmingham Has A Requirement For A Framework For The Provision Of The Supply And Install Of High Voltage 11kv Switch Gear In Various Substations On Campus. The University Intends To Appoint A Single Framework Operator To Deliver This Requirement.at The Discretion Of The University Of Birmingham There May Be A Requirement To Replace Main And Sub Distribution Lv Panels, Circuit Protective Devices And Reconnect The Existing Circuits Back Into The New Switchgear. Testing Of The Circuits And Protection Works, Shall Form Part Of This Framework. Any Civils Work Or Cable Replacement Required For The New Switch Gear Shall Also Form Part Of This Works. The Successful Contractor/ Supplier Shall Be Responsible For Removal Of The Old Switch Gear, The Installation And Commissioning Of The New Switchgear In Its Entirety. The Selection Of The Switchgear Shall Comply With The University Of Birmingham Estates Electrical Specification, And Or The Requirements Of Estates Infrastructure

Details: Details Tender Number Mwp2785ntcsa_r Department Eskom Tender Type Request For Bid(open-tender) Province North West Date Published 27/11/2024 Closing Date 31/01/2025 10 00 Place Where Goods, Works Or Services Are Required Eskom Megawatt Park-sunninghill-johannesburg- Special Conditions Link Https //teams.microsoft.com/meet/382272503681?p=iggyzrzricsox8i7yl Enquiries Contact Person Senyanyathi Yvonia Moretsele Email Moretssy@ntcsa.co.za Telephone Number 011-800-4850 Fax Number N/a Briefing Session Is There A Briefing Session? Yes Is It Compulsory? Yes Briefing Date And Time N/a Briefing Venue Mst Join The Meeting Now Tender Documents 240-84512873 Rev 3.pdf Itp Template.docx Moo21p05-se-d90.pdf 240-15~1.xls C1 2a Ecc3 Data By Employer.pdf 240-68099512 Form A 2016-1 (6).docx 240-68099512 Form A 2020 Cat-3 Rev 8.pdf Qm 58_240-105658000.pdf 240-151560800_environmental Commencement Of Work _revised.docx 240-68099512 Form A 2020 Cat-3 Rev 8.pdf 1.0.1_ntcsa Invitation_to_tender_(itt)_.pdf 20230317_mookodi 1st 500mva Transformer Project Pqp.pdf Moo21p05-se-d6-01.pdf St_240-171000066 Rev 1.pdf Ems Manaul.pdf C3 1 Ecc3 Employers Works Information.pdf 20230628_tdp Bra_ Mookodi Substation.xlsx C1 2b Ecc3 Data By Contractor.pdf T2.2 Tender Schedules For Ecc3.pdf Moo21p05-se-d12-2.pdf C1 1 Ecc3 Offer Acceptance.pdf 240-53113927 Rev1 Spec Ss Clamps Stranded Al.pdf Cqp Template 2016 Rev 1.docx 20210617_annexure C1 High Risk_evaluation_240-77471651.docx Moo21p05-se-d12-1correction05072024.pdf C0 Ecc3 Contract Cover Page (5).pdf C2 Ecc3 Pricing Data Option B.pdf 20210706_annexure B_ She Acknowldgement Form_240-77471499.docx Revised Health And Safety Plan Mookodi.pdf 202409~1.doc 20230317_mookodi 1st 500mva Transformer Project Pqp.pdf Category3- Quality Assessment Criteria.xlsx 240-110600836_ Enviromental Requirements Proforma_final.docx Moo21p05-se-d7-01.pdf 240-68099512 Form A 2016-1 (6).docx St_240-171000067 Rev 1.pdf 240-53113923 Rev2 Spec Ss Clamps Tube Al Conductors.pdf 240-12248652 Cat-3- List Of Tender Returnables Rev 6.pdf 202306~1.doc Supply~1.xls 240-89926574 Rev 2.pdf Moo21p05-se-d75.pdf 240-84237021 Rev 3 Technical Evaluation Standard For Ss Tubular Clamps.pdf 20240710_approval Construction Work Permit Cwp Mookodi Substation.pdf Moo21p05-se-d76.pdf C4 Ecc3 Site Information.pdf 202405~1.pdf C1 3 Ecc3 Proforma Guarantees.pdf

Details: Project Number Dgs C 0553 0045 P ... Project Number Dgs C 0553 0045 Phase 1 Project Title Selinsgrove Center Electrical Upgrades Project Location 1000 U S Route 522 Selinsgrove Pa 17870 This Project Is Advertising For Professional Selections For Design And Or Engineering Services Brief Description The Scope Of Work Includes But Is Not Limited To Investigation Evaluation And Replacement Of Electrical Distribution System And Replacement Of Existing Medium Voltage Switchgear Sub Stations Transformers Diesel Generators Transfer Gear Transformers And Underground Cabling In Support Of The New Switchgear The Project S Priority Is To Replace The Existing Group Operated Air Break Switch Substation Transformers Double Ended Switchgear And Emergency Generators And Associated Paralleling Equipment The Next Priority Is To Replace Existing Cabling Building Switchgear Transformers And Secondary Distribution Equipment Estimated Construction Cost 5 600 000 00 B Application Due Date Thursday January 16 2025 At 4 30 P M B The Department Of General Services Capital Programs And The Bureau Of Diversity Inclusion And Small Business Opportunities Identified This Procurement As Eligible For The Setting Of Small Diverse Business Sdb And Or Veteran Business Enterprise Vbe Participation Goals Applicants Must Agree To Meet All Sdb And Vbe Participation Goals In Full Or Demonstrate That They Have Made Good Faith Efforts To Meet The Goals Refer To The Project Trimble Unity Construct Previously E Builder Solicitation Folder For Instructions Regarding Small Diverse Business And Veteran Business Enterprise Participation The Goals For Sdb Participation 0 The Goals For Vbe Participation 0 Project Documents Including The Application And Project Development Study Pds Can Be Viewed In And Downloaded From The Project S Trimble Unity Construct Solicitation File B All Applicants Are Required To Create A User Profile Within Trimble Unity Construc...

Details: Work Of Water Supply System Of Bakho Town Under Amrut 2.0 survey (both Existing And Proposed Components), Soil Investigation, Design and Construction Of a) construction Of Intake Well And Raw Water Pumphouse On Son river Intake Well Is Considered With Diameter 6 Meters And height 22 Meters Having Average Wall Thickness 350 Mm Also pumphouse Of 4.00 M Height Is Considered b) Construction Of Collecting Well Having A Diameter Of 4.5 M And 6 meter. c) Raw Water Pump: Supplying And Installation Of 3 Nos. Vertical turbine Pumps 3 No 35 Kw (discharge M 23 Lps. Head 94.0 meter) (2w+1s) d) Water Treatment Plant Of 3.50 Mld Capacity Along With Clear water Pumps For 3.50 Mld And All Necessary Electrical And mechanical Equipment For Clear Water Pump House e) Clear Water Pump: 3 Nos.22 Kw (two Working And One Stand By) discharge 22 Ips And 57 M Head,22 Kw f) Providing And Laying Of Raw Water Pumping Main 300 Mm Dia di-k-9 Having Cumulative Length Of 7126 Meter. g) Providing And Laying Of Clear Water Pumping Main 100mm To 300 Mm Dia Di-k-9 Having Cummulative Length Of 4048 Meter. h) Construction Of Three Nos. 20.00 M Staging Height Rcc Overhead service Reservoir Having Capacity Of 475 Kl, 400 Kl, 425 Kl For effective Distribution Of Water. i) Providing, Laying And Jointing Of 110mm To 355 Hdpe Pn-6 Class pipe & 400 Mm Dia Di K7 Pipe For Strengthening And Extension Of water Supply Distribution Network Of Bakho Water Supply arrangement Having Total Length Of 51518 Meter. j ) Supply And Installation Of Plc Scada For Entire Water Supply system k) Providing / Shifting House Service Connections For 1226 Nos. Of domestic Water Connection. 1) 11 Kv Ht Feeder Of 10 Km Length For Intake Well & Wtp substation For Wtp And Intake Well.

Details: Advance Procurement Notice 25kv High Voltage Lines Replacement 4 Wing Cold Lake, Alberta. (with Security Requirements) Purpose Of This Advance Procurement Notice This Is Not A Bid Solicitation Nor A Request For Proposals. This Is An Advance Notice For A Potential Contract With Anticipated Security Requirements To Provide Interested Contractors An Opportunity To Begin The Sponsorship Process For Obtaining (if Required) The Anticipated Security Clearance(s). Note That There Is No Guarantee That This Solicitation Will Proceed Or That Any Security Clearance(s) Will Be Granted Under The Sponsorship Process In A Timely Fashion Or Otherwise. Description Of The Project And Services The Defence Of Canada Fighter Infrastructure (dcfi) Power Grid Modernization (pgm) Project Is To Construct A New 25kv Underground (in Concrete Encased Copper Conduit Except For A Small Section Of Direct Buried Copper Conduit) High Voltage Power Line From Dnd Owned Sub-stn B651 On The Base Side Of 4 Wing To Both The Tac Side And The Airfield Of 4 Wing Cold Lake. The Project Is Divided Into Two Phases. Phase 1 Is The Installation Of A 25kv Line For The Main High Voltage Electrical Distribution System From The Existing Atco East Substation To A New East Switching Station, Through The Existing Switching Station To The New West Switching Station & Installation Of Concrete Encased Duct Bank Throughout. Phase 2 Is The Installation Of A New High Voltage Distribution System To The Qra, Waterleap, Tac Ramp, Hangarettes, And Fsf Tying Into The Phase 1 Distribution System; And Upgrade Of All Distribution Equipment For Multiple Buildings (approx. 13) Throughout The Base; And Also Concrete Encased Duct Bank Throughout. These Two Phases Of The Work Will Be Tendered Together As A Single Project. The Scope Of Work Is Not Limited To Electrical Site Services, It Also Includes Demolition Of Existing Services (i.e. Fences, O/h Line, Riser Poles, Concrete Pad, Etc.), And Reinstatement Of Associated Civil Works. It Is Anticipated That This Solicitation Will Be Initiated In February 2025. This Is Conditional On The Contract Receiving Approval To Proceed By The Department Of National Defence (dnd). It Is Anticipated That The Following Solicitation Will Proceed As Noted In The Table Below. This Is Conditional On The Contract Receiving Approval To Proceed From Dnd.

Details: Rfq Type Goods Goods Safety Related Equipment Reference Number Gl12500459 Title Sign Board;prohib&proce;el Sub;800x600mm Description 19 Each X Sign Board;prohib&proce;el Sub;800x600mm Specification* Prohbition <(>&<)> Procedure Sign - Type: Electrical Substation; Size: 800mm X600mm; Specification: Procedure In Case Of Fire,ww7,un Authorisedentrance Prohibited, Unauthorised Handling Of Machinery. Unframed,reference Km 147, Abs Plastic; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". "1. Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation,supplier To Complete Rfq Sample Checklist Attached To Ad 2. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent# Delivery Date2025/02/14 Delivery Toelectricity - Ndabeni Red1 Plant / Ph: 511 0410 Delivery Address0 Melck Street, Ndabeni Contact Personthembani Geza Telephone Number0214449986 Cell Number Closing Date2025/01/28 Closing Time04:00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: The contract refers to the modernization of the substation with additional return heat installation as well as the modernization of process water technology for the bathing facility...

Details: Hospital Group Center - Edouard Herriot Hospital Replacement of the Low Voltage General Panel of the P6 Substation

Description: Contract notice – Sector Directive, standard regulation negotiated procedure with prior publication of a call for competition/negotiated procedure (construction work) Uw Berliner Straße Project description substation Berliner Straße The structure is being built on a 2,095 m² plot of land and is structured as follows: The cables are introduced into the building in the basement. From there, they are led directly into the 20 kV switchgear on the ground floor and via an open shaft into the 110 kV switchgear on the first floor. The two 110 kV transformers provided are arranged on the ground floor, while the oil drip pans for these transformers are located in the first basement. The building has a staircase in the southern area that provides access from the basement to the roof. A freight elevator will also be installed that reaches up to the first floor. The structure extends over a depth of approx. 22.5 m and a width of approx. 48.8 m. On the southwest side, a shaft approx. 2 m wide is planned, which serves the forced cooling of the two 50/63 mva transformers. The total building height is approx. 15.3 m including a parapet of 1.4 m. The civil engineering includes a well foundation for the foundation and the construction of a Berlin shoring with rear anchoring to secure the excavation pit. Furthermore, the building must be provided with a predefined expanded metal facade with corresponding substructure all around. The 110 kV switchgear on the first floor is to be designed as a gas-insulated double busbar variant with an alternative gas to SF6 that meets the current requirements of the F-gas regulation. This switchgear comprises seven panels with the following division: transformer 1, feed-in network 1, longitudinal separation, cross-coupling, feed-in network 2, transformer 2 and reserve panel. The busbars and panels are to be designed for 2500 A and a short-circuit current of 40 KA for 3 seconds. The standardized protection and control cabinets are housed in a separate adjacent room. A 110 kV E-coil is to be installed on the first floor and connected to the 110 kV star points of the transformers. The isolators to be supplied are located in the E-coil room. All required connections are to be taken into account in the scope of the project. The 20 kV primary switchgear and the star-point switchgear are located on the ground floor. The primary switchgear is to be implemented as an air-insulated double busbar with a nominal current of 2500 A and a short-circuit current of 25 Ka for 3 seconds. It comprises 42 panels, two of which are to be provided as space reserves. The switchgear is divided into three busbar sections that are connected to one another via two longitudinal couplings. Sections 1 and 3 also contain cross-couplings. The star-point switchgear is to be implemented as an air-insulated single busbar, comprises 11 panels and can be connected to one another via three longitudinal couplings. It is to be designed for a nominal current of 1250 A and a short-circuit current of 20 Ka for 1 second. Two 20 kV E coils, a grounding transformer and the 20 kV star points of the transformers provided are to be connected to this system. All required connections are to be taken into account in the scope of the project. The AC and DC switchgear and the batteries for the DC supply are located in the first basement. The DC switchgear is to be designed redundantly and includes two batteries, each with 200 Ah at 220 Vdc. The AC switchgear includes six panels, including a feed panel for the 400 kVA auxiliary winding of the grounding transformer, a feed panel for a 400 A house connection and one for the emergency power system. In addition, three fans are installed in the basement for ONAF operation of the 110 kV transformer rooms. All technical components are to be designed in accordance with the current standards and regulations. Design of the electrical equipment ? 110 kV switchgear in SF6-free design including control cabinets (7 fields with space reserve for one more) ? Two 110/20 kV transformers with an output of 50/63 MVA (will be provided) ? 20 kV primary switchgear // DSS system, air-insulated (42 fields) ? 20 kV starpoint switchgear // ESS system, air-insulated (11 fields) ? Two 20 kV E-coils up to 52-520 A in continuous operation, 650 A in short-time operation (will be provided) ? One 110 kV E-coil up to 24-240 in short-time operation (will be provided) ? One earthing transformer with a starpoint current of up to 565 A in continuous operation; 660 A in short-term operation, as well as a net output of 400 KVA (will be provided) ? AC and DC power systems ? 220 Vdc battery system Division of the rooms in the substation ? Basement O 2 transformer troughs O Staircase (1x for SW network) O Anteroom (1x for SW network) O Goods elevator (1x for SW network) O Technical room O AC power system room O DC power system room O Battery room O Tank room O Cable cellar (20 and 110 kV cables) O Cable ducts (2x 110 kV, 2x LWL, 1x TGA, etc.) ? Ground floor O 2 transformer rooms O Staircase (1x for SW network) O Anteroom (1x for SW network) O Goods lift (1x for SW network) O Bma/ema room O Corridor O 2 20 kV e-coil rooms O 1 earthing transformer room O 20 kV DSS primary and star point switchgear room O Sanitary rooms O 20 kV technical room O Cable ducts (2x 110 kV, 2x LWL, 1x TGA etc.) ? First floor O 2 air spaces for the transformers O Staircase (1x for SW network) O Anteroom (1x for SW network) O Goods elevator (1x for SW network) O Corridor O 110 kV protection and control technology O 1 x 110 kV e-coil room O 110 kV switchgear room O 110 kV technical room O Emergency power system room O Cable shafts (2x LWL, 1x TGA etc.) Building including civil engineering The client will conduct a negotiated procedure with a prior competition for the award of construction services. Only the equipment provided may be used to submit the application to participate. The client will check and evaluate the applications to participate received on time in terms of form and content. He will then ask the best-placed applicants (maximum of five) to submit a bid for the services advertised (start of the tender phase). The applicants/groups of applicants are selected for the tender and negotiation phase based on their suitability in relation to the references in accordance with the competition. The invitation to submit a tender (aza) is issued secondarily. This describes the tasks to be performed in addition to the announcement, announces the evaluation criteria and the evaluation matrix, and provides further information on the subject matter of the contract, the contractual regulations and the service specifications. The incoming offers are checked for form and content. The client expressly reserves the right to enter into negotiations with selected bidders regarding their offers. If the client conducts negotiations regarding the offers, the remaining bidders are invited to the negotiation round and their offers are negotiated separately with them. Further negotiation rounds remain reserved. The offers are evaluated based on the evaluation criteria and the evaluation matrix announced there. Electrical systems The client is conducting a negotiated procedure with a prior competition for the award of construction services. Only the documents provided may be used to submit the application to participate. The client will check and evaluate the applications to participate received on time in terms of form and content. It will then invite the best-placed (maximum of five) applicants to submit an offer for the services advertised (start of the tender phase). The applicants/groups of applicants are selected for the tender and negotiation phase based on their suitability in relation to the references in accordance with the competition. The invitation to submit an offer (aza) is made secondarily. This describes the tasks to be performed in addition to the announcement, announces the evaluation criteria and the evaluation matrix, and provides further information on the object of the contract, the contractual regulations and the service specifications. The incoming offers are checked in terms of form and content. The client expressly reserves the right to enter into negotiations with selected bidders regarding their offers. If the client conducts negotiations regarding the offers, the remaining bidders will be invited to the negotiation round and their offers will be negotiated with them separately. Further negotiation rounds remain reserved. The offers will be evaluated based on the evaluation criteria and the evaluation matrix announced there.