Solar Power Plant Tenders

Details: Augmentation To Gangakhed Water Supply Scheme Under Maharastra Suvarn Jayanti Nagarotthan Maha Abhiyan, Tal.gangakhed, Dist.-parbhani. (masoli Source A) Approach Channel L-300 M , B) Repair Of Existing Jackwell Dia. 6.5 M @ Masoli Dam, C) Construction of Panel Room 8x6x5m , D)raw Water Pumping Machinery At Masoli Jackwell, (200 Hp V.t. Pumps, Discharging Cap. 419300 lph For Head 83 M - Total 3 Nos. 2+1 Nos With Automation Of Pumps ), E) Desilting Pump @ Masoli Jackweell F) Raw Water rising Main From Head Works To Bpt , (500 Mm Dia. D.i.k-9 Pipes- L =700 M) g)repairs To Existing Bpt (total Cap. 2,25,000 Ltr), H) Raw Water Gravity Main From Bpt To Wtp 350 Mm Dia. Di K7 Pipes ,l =1500 M , 400 Mm Dia. Di K-7 Pipe L = 6500m. Godavari Source I) Repair Of Intake Well @godavari - Dia 6 M & Depth 18 M, J) Repair Of Existing Jackwell Dia- 6 M Ht-8 M @godavari River, K) Raw Water Pumping Machinery At godawari Jackwell Q:- 34200 Lph Head H:-81m 20.0 Hp Submersible Monoblock Pump, L) Desilting Pump At Godavari River, m) Raw Warter Rising Main From Jackwell @ Godavari River To Wtp Di K-9 Dia- 200mm Length - 4500 M. Combine subworks N)proposed Conventional Water Treatment Plant Capacity- 19 Mld O) Recirculation Sump Cap- 3,57,000 Lit, p) Raw Water Pumping Machinery At Recirculation Sump Q:-66640 Lph Head H:-12 M 7.5 Hp Submersible Pump (2+1), Q) rising Main From Recirculation Sump To Wtp Di K-9, Dia-200 Mm Length -100m, R) Pure Water Pumping Machinery Q403400 Lph Head H:-33 M 90 Hp Vt Pump (2+1), S)pure Water Rising Main From Wtp To Mbr Di K-9, Dia-500 Mm Length - 1200 M, T) Mbr For Gangakhed (total Cap:- 15,34,000 Lit), U) Pure Water Gravity Main From Mbr To Various Esr's Dia200mm To 700mm Length-6467m, V) Provision For Repairs To Existing Rcc Elevated Storage Reservoir At Gangakhed (total Cap:- 13,00,000 Lit), W) Rcc Elevated Storage Reservoir At Gangakhed (total Cap:- 25,14,000 Lit), X) distribution System Hdpe Pe- 6kg/cm^2 Dia 110 Mm To 225 Mm & Di K-9 Dia 250 Mm To 500 Mm Total Length - 125.00 Km Y) Running The Scheme On Trial Basis, Miscellaneous Works, Solar Power Plant 510 Kwp, automation (scada ) Etc Complete.)

Details: Pre-tender Meeting For Publishing Tender Towards Selection Of Epc Contractor For Design, Engineering, Procurement, Construction, Testing, Commissioning, And Operation & Maintenance Of A Floating Solar Photovoltaic (fspv) Power Plants. All The Prospective Interested Bidders May Participate In The Pre - Tender Meeting Through Video Conference At 12:00 Pm 26.08.2024 With Following Link. Https://hpcl-in.zoom.us/j/99471002345?pwd=bybsc9loxtazytzlgwbn50pm5zvhvc.1 Meeting Id: 994 7100 2345 Passcode: 846846

Description: CATEGORY: Measuring Steel Tape , Combination Plier Insulated , Screw Driver Insulated , Electrician screw driver thin stem insulated handle , Heavy Duty Screw Driver insulated , Electrician Screw Driver thin stem insulated handle , Punch Centre , Knife Double Bladed Electrician , Neon Tester , Steel Rule , Hammer Cross pein , Electrical Symbol and Accessories Charts , Pipe vice , Hand Vice , Table Vice , Hacksaw frame with blade , File flat , File half round , File round , Pliers ,long nose , Pliers flat nose insulated , Pliers, round nose insulated , D.E. metric Spanner Double Ended , Wire Gauge imperial stainlees , Portable Electric Drill Machine , Crimping Tool , Pliers Side Cutting , Wire stripper adjustable length , Hammer ball peen With wooden handle , Scriber , Tool kit Box or bag portable , Allen Key , Scissors blade , Electrical load board , Torque wrench , Pipe Cutter to cut pipes , Try Square , Multi Meter analog , Load Bank variable , Wire Cutter and Stripper , Earth Plate , Earth Electrode , Out Side Micrometer , Tap and Die set , Trolley for Transportation of Batteries , Rooftop Mounting Structure , Electrical wiring and switch gear rack , Protective relays and contactors rack , MCCB , ELCB and RCCB , Fuses , Digital Multimeter , Megger , Hydrometer , Solar Insulation meter , Pyranometer , Pyrheliometer , Lux meter , Magnetic Flux Meter , Tong Tester or Clamp Meter , Soldering Iron , Temperature controlled Soldering Iron , Thermometer Digital , Sun Shine recorder , Weather monitoring station , Solar cell based sunlight radiation meter , Magnetic compass , Cut models of photo voltaic cell assembly , Cut model of Lead acid battery , Lead Acid battery , Solar simulator for solar cell characteristic study , I V Curve tester , Sun path finder , Solar energy trainer with grouping of solar cells , Solar tracker demonstrator kit , Solar PV e- learning software using animations for training , Halogen lamp with stand for illumination of solar panels in lab , Motorized Bench Grinder , Battery Charger , Solar photovoltaic module , Solar panels , Solar Charge controller with Dusk to Dawn automatic switching , Solar charge controller with manual switch Day lighting , Array junction box , Solar lantern , Solar lantern assembly sets , Home light system , Solar cell kit , Clinometer , Spirit level , Anemometer , DC table fan , AC Voltmeter Moving Iron , Volt meter , Ammeter MC , Ammeter MC centre zero , Power Factor Meter , Rheostat , AC Energy Meter , Kilo Wattmeter Analog , Digital Wattmeter , Phase Sequence Indicator , Frequency Meter , DC LED Lamp , DC Pump , PWM Controller , MPPT Charge Controller , Inverter with Battery , Solar PCU , Solar Grid tied inverter Demonstrator kit , Solar Street Light , Solar wind hybrid power plant , Solar Traffic Light , Water treatment solar plant demonstrator kit , Solar DC pump , Demonstration kit for wind generation Wind turbine with blower , Working Bench , Wiring Board

Details: Description:- Design, Supply, Installation, Testing And Commissioning Of "on Grid" Solar Photovoltaic Power plant With Required Solar Mono Crystalline Pv Modules, Ms Hot Dipped Galvanized Structure For Mounting Of panels, Suitable Power Conditioning Units Able To Adjust Voltage And Frequency Level To Suit The Grid Voltage frequency, Array And Main Junction Boxes With Ip 65 Protection, Required Ac And Dc Distribution Boards With switchgear, Armoured Power And Control Cables, Remote Data Monitoring System, Concerned State Electricity Board approved Bidirectional Energy Metering System (net Metering Applicable As Per Availability Of Power Supply Lt Or ht);htmeteringcubicleenclosurewithbusbar,changeoverarrangement,currenttransformers,solar generation Meter Box As Required, Earthing Arrangements, Suitable Lightening And Surge Protection As Per Detailed specifications Including All Necessary Allied Works/accessories As Per Site Condition, Liaison, Registration, Inspection and Any Other Charges Of Discoms Shall Be Borne By Contractor. The Successful Contractor Shall Survey The proposed Sites And Submit The Gad For Approval To Sr. Divisional Electrical Engineer (power) Vadodara Before commencing The Work. The Work Shall Be Warranted For A Period Of Five Years From The Date Of Completion. detailed Technical Specifications Are Given In Annexure-xx Of Tender Document.

Details: Description:- Design, Supply, Erection, Testing And Commissioning Of Grid Connected Rooftop Solar Pv System With mono Crystalline Panel Complete With All Accessories, Monitoring System, Inverter, Structure, Cables, Net Metering etc Complete With Five Years' Warrantee - Design, Supply, Installation, Testing And Commissioning Of "on Grid" solar Photovoltaic Power Plant With Required Solar Mono Crystalline Pv Modules, Ms Hot Dipped Galvanized structure For Mounting Of Panels, Suitable Power Conditioning Units Able To Adjust Voltage And Frequency Level To suit The Grid Voltage Frequency, Array And Main Junction Boxes With Ip 65 Protection, Required Ac And Dc distributionboardswithswitchgear,armouredpowerandcontrolcables,remotedatamonitoringsystem, concerned State Electricity Board Approved Bidirectional Energy Metering System (net Metering Applicable As Per availability Of Power Supply Lt Or Ht); Ht Metering Cubicle Enclosure With Bus Bar, Changeover Arrangement, current Transformers, Solar Generation Meter Box As Required, Earthing Arrangements, Suitable Lightening And surgeprotectionasperdetailedspecificationsincludingallnecessaryalliedworks/accessoriesaspersite condition, Liaison, Registration, Inspection And Any Other Charges Of Discoms Shall Be Borne By Contractor. The successful Contractor Shall Survey The Proposed Sites And Submit The Gad For Approval To Sr. Divisional Electrical engineer (power) Vadodara Before Commencing The Work. The Work Shall Be Warranted For A Period Of Five Years from The Date Of Completion. Detailed Technical Specifications Are Given In Annexure-xx Of Tender Document.

Details: Description:- Design, Supply, Installation, Testing And Commissioning Of "on Grid" Solar Photovoltaic Power Plant With Required Solar Mono crystalline Pv Modules, Ms Hot Dipped Galvanized Structure For Mounting Of Panels, Suitable Power Conditioning Units Able To Adjust Voltage And frequency Level To Suit The Grid Voltage Frequency, Array And Main Junction Boxes With Ip 65 Protection, Required Ac And Dc Distribution Boards With switchgear, Armoured Power And Control Cables, Remote Data Monitoring System, Concerned State Electricity Board Approved Bidirectional Energy metering System (net Metering Applicable As Per Availability Of Power Supply Lt Or Ht); Ht Metering Cubicle Enclosure With Bus Bar, Changeover arrangement, Current Transformers, Solar Generation Meter Box As Required, Earthing Arrangements, Suitable Lightening And Surge Protection As Per detailed Specifications Including All Necessary Allied Works/accessories As Per Site Condition, Liaison, Registration, Inspection And Any Other Charges Of discoms Shall Be Borne By Contractor. The Successful Contractor Shall Survey The Proposed Sites And Submit The Gad For Approval To Sr. Divisional electrical Engineer (power) Vadodara Before Commencing The Work. The Work Shall Be Warranted For A Period Of Five Years From The Date Of completion. Detailed Technical Specifications Are Given In Annexure-xx Of Tender Document. The Tentative Sites Of Work Are Given In Annexure-xxi Of tender Document.

Details: This contract concerns the acquisition and installation of an autonomous hybrid solar power plant composed of a solar field, a battery bank, a generator and a wind demonstrator on one of the terraces of building F (says La Recherche) On the site of the IUT de Ville d'Avray, within the University of Paris Nanterre.

Details: Description:- Design, Supply, Erection, Testing & Commissioning Of "on Grid Solar Roof Top Photovoltaic Power plant Of Capacity 145kwp" In The Following Locations Of Icf Comprising Of Spv Modules, Mounting Structures, power Conditioning Units, Junction Boxes, Distribution Boxes Cables & Wires, Lightning Arrestor, Earthing Kits, Pvc pipes& Accessories And Monitoring System As Per Icf Specification. Location 1 - Arun Stadium - 25 Kwp, location 2 - Shell Factory Canteen - 30 Kwp, Location 3 - Furnishing Canteen - 40 Kwp, Location 4 - Officer's rest House/perambur - 40 Kwp, Location 5 - Rpf Hostel - 10 Kwp".

Details: Technology Licensing Opportunity electric Current Enhanced Diffusion Welding For Manufacturing High-temperature Compact Heat Exchangers a New Approach To Fabricating Compact Heat Exchangers For High-temperature Applications opportunity: Idaho National Laboratory (inl), Managed And Operated By Battelle Energy Alliance, Llc (bea), Is Offering To Enter Into A License Or Collaborative Research Agreement To Commercialize This New Diffusion Welding Technology For Manufacturing High-temperature Compact Heat Exchangers. This Technology Transfer Opportunity Is Part Of A Dedicated Effort To Convert Government-funded Research Into Job Opportunities, Businesses, And, Ultimately, An Improved Way Of Life For The American People. overview: Diffusion Welding Of High-temperature Materials Such As Alloy 617 Is Technically Challenging, Costly, And In Some Cases, Nearly Impossible Due To Surface Preparation Needs, Residual Porosity, Precipitate Formation At Weld Interfaces, And Significantly Reduced Elevated-temperature Mechanical Properties. Researchers At Inl Have Developed A Method To Overcome These Challenges Through Electric Current Enhanced Diffusion Welding Enabled By Spark Plasma Sintering (sps). this New Process Enables Cost-effective Fabrication Of Compact Heat Exchangers For Elevated-temperature Applications Such As Nuclear Microreactors And Concentrated Solar Power Plants. Experiments Have Demonstrated That Alloy 617 Components Joined With This Process Have Superior Grain Growth Across The Interfaces, Which Is Critical To Acquire Mechanical Properties Like The Base Metal. This Technique Overcomes Challenges With The Existing Diffusion Welding Techniques. the Primary Challenge In The Current State Of The Art Of Sps Processing Is The Limited Capacity To Manufacture Large Parts, Such As Heat Exchanger Components. However, Inl's Recently Designed And Built Dcs-800 Unit, The Most Extensively Known Sps System In The World, Will Be Able To Fabricate Plates That Meet The Size Requirements To Qualify For Diffusion Welding. benefits: superior Grain Growth Across The Component Interface And Eliminate Diffusion Welding Interfaces. the Diffusion Welds Are Homogenous Across The Width Of The Plate. limit Precipitate Formation At The Interface. enhanced Performance In Grain Boundary Migration Compared To Previous Studies. improved Overall Weld Quality Using Efas Compared To Hot Pressing And Hot Isostatic Pressing Methods. significant Energy Savings (70–90%) In Manufacturing Compact Heat Exchangers Compared With Diffusion Welding Using Hot Pressing And Hot Isostatic Pressing. target Applications: fabrication Of Compact Heat Exchangers For Elevated-temperature Applications, Including Advanced Nuclear Reactors, Concentrated Solar Power, And Chemical Processing Plants. development Status: Trl 3; Undergoing Proof-of-concept Work. ip Status: Patent Application No. 18/183,513, “methods Of Forming Articles By Applying Electric Current And Pressure To Materials, And Related Articles,” Bea Docket No. Ba-1335. additional Information: zhang, X, Rupp, Re, Rufner, Jf, & Mcmurtrey, Md. "electric-field-assisted Diffusion Welding To Fabricate Alloy 617 Compact Heat Exchangers." Proceedings Of The . Volume 4a: Materials And Fabrication. Las Vegas, Nevada, Usa. July 17–22, 2022. V04at06a005. Asme. Https://doi.org/10.1115/pvp2022-83842 inl Seeks To License The Above Intellectual Property To A Company With A Demonstrated Ability To Bring Such Inventions To The Market. Exclusive Rights In Defined Fields Of Use May Be Available. Added Value Is Placed On Relationships With Small Businesses, Start-up Companies, And General Entrepreneurship Opportunities. please Visit Technology Deployment’s Website At Https://inl.gov/inl-initiatives/technology-deployment For More Information On Working With Inl And The Industrial Partnering And Technology Transfer Process. companies Interested In Learning More About This Licensing Opportunity Should Contact Andrew Rankin At Td@inl.gov.

Details: The Contractor's Goal Is to Increase the Energy Efficiency of the Building. Works to be carried out to achieve the goal: • Replacement of open fillings; • Reconstruction of the heating system; • Construction of the ventilation system; • Renovation of the electrical system; • Construction of a solar power plant; • Construction of a Hot Domestic Water System; • Renovation of water and sewage lines