Solar Power Plant Tenders

Details: Description:- Supply, Installation, Testing And Commissioning Of On-grid, Rooftop Mounted Solar Photovoltaic power Plants Of 05 To 50 Kwp Capacity, Net Metering Type, To Be Installed At Various Buildings / Covered Platforms at Different Railway Stations (56 Nos) Under Hubballi Division. Conforming To Mnre Specifications As Amended and As Per Tender Conditions. The Plant Consisting Of Mono Crystalline Silicon Solar Cells, Net Metering Facility, necessary Protections, Earthing, Mounted On Gi Structure Suitable As Per Site Requirements And Withstand A Wind velocity Of 150 Kms Per Hour. Carrying Out Maintenance For A Period Of 36 Months After Completion Of The Work including Following Components Complete As Required:- A) Solar Photovoltaic Module Of Capacity 330 Wp Or Above, manufacturedinindia,conformingtois14286/iec61215,is/iec61730-part1,is/iec61730-part-2.solar photovoltaicmoduleconversionefficiencyshallnotbelessthan16.5%.pvmodulesusedinsolarpower plants/systems Must Be Warrantied For Their Output Peak Watt Capacity, Which Should Not Be Less Than 90% At The end Of 10 Years And 80% At The End Of 25 Years. B) Power Conditioning Unit (pcu) Of 250-800 V Dc Input Voltage range And 400 V Ac, Three Phase, 50hz+/-2.5hz,, 50hz+/-2.5hz, Output Voltage Suitable To Generate Ac Power with Efficiency Not Less Than 97%, Total Harmonic Distortion Less Than 3% And Suitable For Ambient Temperature from 0 To 50 Degree C. The Pcu Shall Adjust The Voltage And Frequency Level To Suit The Grid Voltage Frequency. all Outdoor Panels Must Be Protected With Ip-65 Ratings Or Above. C) Online Data Monitoring System Complete With accessories. D)fixingofarrayjunctionbox&mainjunctionboxwithip65 Protection Andtermination arrangement For Incoming And Outgoing Cable Along With Glands, Lugs And Other Accessories Etc. As Required. E) lightning And Surge Voltage Protection. F) Connections & Interconnections By Supplying & Fixing Required Size, single Core Xlpe Insulated Copper Conductor 1.1 Kv Grade Armored Power And Control Cables For Dc System And xlpe Insulated Armoured, 4 Core Aluminium Conductor Cables Of Suitable Size Between Ac Panel To Domestic Lt panel. Pcu Unit Along With Supplying & Fixing Of Necessary Channel/ Conduit Lugs And Other Accessories Etc. suitable Skid Free Walkway Provision On Sloppy Roof For Cleaning Purpose Wherever Required For Plants More Than 10 Kwp Capacity Complete All As Specified In The Tender Documents And As Directed At Site. Note: Lt Xlpe Ug cable From The Domestic Lt Panel To Grid Supply Connections / Up To Termination Point Will Be Supplied By Railways.

Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Solar Powered Pump Of Quinagaringan Grande Spip Contract Ref. No. : Nia.igimo-carp-ic-quinagaringan Grande Spip-cw31-24 Location : Passi City, Iloilo Approved Budget For The Contract (abc) : Php 4,440,552.81 Contract Duration : 150 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Hydraulic Drilling Rig With Machine 1 Unit – Welding Machine 1 Unit – Generator Set 1 Unit – Water Pump 1 Unit – Dump Truck 1 Unit – 1-bagger Concrete Mixer 1 Unit – Concrete Vibrator 1 Unit – Geo-resistivity Machine 1 Unit – Compressor Brief Description: Supply, Delivery, Installation And Commissioning Of Solar Powered Pump, Pumping Plant, Temp. Works, Occupational Safety & Health Program, Project Billboard Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Five Thousand Pesos (php 5,000.00) To The Nia-igimo Cashier. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – June 18, 2024, 8:30 A.m. 2. Pre-bidding Conference – June 3, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – June 18, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Geraldine G. Cabaobao Bac Vice Chairman Noted: Randy C. Alipis, Mpa Division Manager A Date Of Posting: Philgeps – May 24 – June 18, 2024

Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Solar Powered Pump Of Jalaur Extension Ris Contract Ref. No. : Nia.igimo-repair-nis-jalaur Extension Ris-cw27-24 Location : Dumangas, Iloilo Approved Budget For The Contract (abc) : Php 4,683,005.67 Contract Duration : 150 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Dumptruck 1 Unit – 1 Bagger Concrete Mixer 1 Unit – Concrete Vibrator 1 Unit – Water Pump 1 Unit – Hydraulic Drilling Rig With Machine 1 Unit – Welding Machine 1 Unit – Generator Set 1 Unit – Geo-resistivity Machine Brief Description: Supply, Delivery, Installation, Commissioning Of Solar Powered Pump, Pumping Plant, Bench Flume, Temp. Works, Occupational Safety & Health Program, Project Billboard Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Five Thousand Pesos (php 5,000.00) To The Nia-igimo Cashier. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – May 2, 2024, 9:00 A.m. 2. Pre-bidding Conference – April 19, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – May 2, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Lucy Grace B. Improgo Bac Chairman Noted: Randy C. Alipis, Mpa Division Manager A Date Of Posting: Philgeps – April 12 – May 2, 2024

Details: Description Lot No. Unit Quantity Specifications Approved Budget For Contract Price Of Bid Documents Delivery Period 1 Package 1 Supply, Delivery And Installation Of 5 Metric Tons Ice Plant Machine With Generator Set, Cold Storage And Other Accessories 18,500,000.00 25,000.00 Must Be Completed Within 45 Calendar Days Upon Receipt Of Ntp 2024-03-0526 Specification: 5 Metric Tons, 115 Kw Solar Powered Ice Plant And Cold Storage With 152 Kwh Lifepo4 Battery, 1000l/hour Seawater Desalination Machine And 150kva Generator Project Location: Languyan, Tawi-tawi Detailed Specification: Aluminum Direct Refrigeration Block Ice Making Machine Machine: ● Direct Cooling Refrigeration Type Block Ice Making Machine ● Capacity: 5,000 Kg In Single Production @ 12 Hours ● Weight Of Blocks: 50 Kg/block ● Single Production Quantity: 100 Blocks ● Fully Automated Machine ● Ice Lifting Plate With Lifting Mechanism ● With Lock Mechanism ● Integrated Unit And Compact Design. Refrigeration System Includes: ● Compressor: 40hp Minimum ● 380v, 50hz, 3phase ● Number Of Compressors: 1 Unit ● Compressor Type: Screw Compressor ● Refrigerant Charge: R404a ● Oil Separator (coalescent) ● Oil Reservoir ● Oil Filter Drier ● Oil Level Regulator ● Condenser: Shell And Tube ● Cooling Tower: Water Cooled With Fan And Cooling Tower Pump ● Liquid Receiver With Level Sensors And Float Switch ● Liquid Filter Drier ● Expansion Valve ● Evaporator With Seals ● Evaporator Pressure Regulator ● Accumulator ● Suction Filter ● Evaporator Pressure Regulator ● Valves (check Valves, Isolation Valves, Pressure Relief Valve, Actuator, Stop Valve, Solenoid Valve) ● Piping ● Insulation For The Piping ● Automatic Electric Control Panel With Timers And Sensors ● With Defrost Ice Block Molder (evaporator) ● Direct Heat Exchange Method ● Direct Cooling Plate Type Heat Exchanger ● Number Of Evaporators: 1 Set ● Material: Aluminum Alloy/sus304 Stainless Steel ● Evaporating Temperature: -15 Degrees Celsius ● Seals: Silicone ● Ice Comply With Food Hygiene Standard Requirements For Water Feeding Line ● Automatic Water Feeding Function With Water Level Control ● Water Feeding Pipes ● Water Pumps With Sensors And Switch ● Water Filters ● Water Level Sensor ● Passive Reservoir Control ● Plumbing Installation From The Desalination Machine To The Ice Machine Included Instrumentations ● Pressure Differential Indicator Or Switch For Inlet And Outlet Of Oil Separator And Liquid Filter Driers ● Low And High Pressure Switch ● Pressure Transducers ● Temperature Sensors ● Level Sensors ● Sight Glass For Oil Line And Liquid Refrigerant Line ● Temperature Gauges And Pressure Gauges ● Others Useful Sensor Cold Storage ● 3mx2mx2.5m Dimension ● Temperature: -10 Degree Celsius ● Refrigerant : R404a ● Cooling System : Air Cooling ● Compressor : Screw Compressor ● 220v, 60hz, 3phase ● Air Cooler : Dd30 ( 1 Set ) ● Insulation Panels Thickness : 100mm Material (wall, Ceiling ) : Double-side Color Bond Steel Pu Panels ● Door Size : 0.8mx1.8m Thickness : 100mm Quantity : 1 Pieces Material : Double-side Color Bond Steel Pu Panels 115kw Solar Panels, 150kva Inverter And 152kwh Battery ● 115 Kw ● Solar Panels: 210pcs (550w) Bi-facial ● Mppt Charge Controller: 384v, 200a ● Lifepo4 Battery: 152kwh (380v400ah) ● Off Grid Inverter, 150 Kva, 3ph, 380v ● Ground Pv Mount Component And Steel Structure ● Cable And Electrical Supply Location Working Conditions: ● Power Supply: 380v, 60hz, 3 Phase; ● Standard Ambient Temperature: 35 Degrees Celsius ● Standard Water Temperature: 27 Degrees Celsius Warranty: ● Compressor: 5 Years ● Evaporator: 5 Years ● Condenser: 5 Years ● Cooling Tower: 3 Year ● 1 Year Workmanship Warranty ● Inverter : 5 Years Replacement ● Solar Panels And Battery: 10 Years ● Overall Power Warranty: 20 Years ● 1000 Liters Per Hour Solar Seawater Desalination Machine ● Pro Filter ● Softener System ● Reverse Osmosis Host Machine ● Plc Touch Screen ● Uv System ● Liquid Level Sensor ● 500 Liters Raw Water Storage Tank ● 500 Liters Pure Water Storage Tank Heavy Duty Ice Crusher ● Capacity: 25kg Ice Block 150 Kva Generator Set O Year Model: Manufacturers Current Model O Brand New O Packaged Diesel Engine Generator Set O Stand-by Power O Generator Is Use To Power The 1-unit 5 Tons Capacity Ice Plant And Cold Storage During Power Interruption ● Performance: O Apparent Power: 150kva (minimum) O Phase: 3-phase O Output Frequency: 60hz O Power Factor: 0.8 O Voltage Output: 220v O Amperes: 460a O Engine Configuration: Diesel Engine, Turbocharged O Number Of Cylinder: 4-cylinder In-line (minimum) O Cooling System: Water Cooled O Fuel Type: Diesel Fuel ● With Weather Proof Enclosure ● Start System With Maintenance Free Battery ● Battery Charger/alternator ● Batteries ● With Lubricating Oil System ● Fuel Injection System ● Air Induction And Exhaust System, ● With Radiator Pipes For Cooling System ● Exhaust Pipe ● All Necessary Filters, Instruments, Valves, Piping, Fittings, Ducts Etc. ● Instruments: Temperature Indicators For Lube Oil Temperature And Pressure Gauges For Lube Oil, Fuel Oil, Cooling Water System, ● Standard Fuel Tank Capacity ● Power Generator ● The Complete Generator Set Is Mounted As Whole On A Heavy-duty Fabricated, Steel Base Frame. ● Anti-vibration Pads Fixed Between The Engine Feet And Base Frame ● With Foundation Pedestal Post ● Automatic Transfer Switch (ats)/automatic Start-stop System ● Control Panel With Metering Devices ● Installation Of Power Cables From The Generator Set To The Ats, Cable Pulling And Termination ● Installation Of Flexible Pipe And Ats Mounting ● Termination Of Control Wires From Generator Set To Ats ● Main Line Circuit Breaker ● Wires And ● Thermal Lugs ● Conduit Pipes ● Safety Requirements: O Equipped With Safety/precautionary Markings Which Shall Be Weather Resistant And Under Normal Cleaning Procedures, Shall Not Fade, Discolor Crack Or Blister And Remain Legible. ● Maintenance: With The Following Standard Heavy-duty Tools And Accessories: O Three (3) Pieces Open Wrench O One (1) Piece Of Philips Or Cross-tip Screw Driver O One (1) Piece Of Flat Screw Driver O One (1) Piece Of Mechanical Pliers O One (1) Piece Of Adjustable Wrench O With Heavy Duty Toolbox And Roll Up Tool Holder ▪ Size That Could Accommodate The List Of Tools ▪ Material: Metal Or Plastic O One (1) Original Equipment Manufacturer Manual (oem) Written In English For: ▪ Parts ▪ Service ▪ Users/operators ● Warranty And After-sales Service: O The Distributor/dealer Shall: ▪ Provide After-sales Services Free Of Charge If The Machine Is Still Under Warranty And Change At Reasonable Cost For Services That Are Already Out Of Warranty; ▪ Maintain Spare Parts Of At Least 10% Of Their Average Past Three-year Sales Per Product To Ensure Inventory If Fast-moving Spare Parts; ▪ Provide After Sales Service Within 72 Hours Upon The Receipt Of Complaints/request; And ▪ Provide Training On The Operation, Repairs And Maintenance Of The Agricultural And Fisheries Machinery. ● The Distributor/dealer Shall Include Testing/commissioning On Site. O The Distributor/dealer Shall Provide Test Materials And Lubricants For Testing/commissioning. ● Reflectorized Mafar Logo O With Reflectorized Mafar-barmm Logo (10 Inches Diameter) With Text Mafar-barmm Bangsamoro Appropriations Act Fund Cy-2024 (2 Inches Height) O The Mafar Logo Shall Be Placed At A Visible Position In The Machine Which Could Either Be Painted Or Made Up Of An All-weather Reflectorized Sticker. Scope Of Works ● Supply And Installation Of Ice Block Machine Including Electrical Component ● Supply And Installation Of Cold Storage Including Electrical Component ● Supply And Installation Of Solar Panel, Inverter, Battery Including All Electrical Component To Power The Ice Block Machine And Cold Storage ● Supply And Installation Of Generator Set Including All Electrical Component To Power The Ice Block Machine And Cold Storage ● Testing And Decommissioning Goods Must Be Delivered And Installed Within 45 Calendar Days After The Receipt Of The Notice To Proceed (ntp). Total Abc Php18,500,000.00

Details: Description Particulars Posted Supplemental Additional Specifications, Period Of Delivery For Lot 1 Supply, Delivery And Installation Of 5 Metric Tons Ice Plant Machine With Generator Set, Cold Storage And Other Accessories (1 Packages) Specification: 5 Metric Tons, 115 Kw Solar Powered Ice Plant And Cold Storage With 152 Kwh Lifepo4 Battery, 1000l/hour Seawater Desalination Machine And 150kva Generator Project Location: Languyan, Tawi-tawi Detailed Specification: Aluminum Direct Refrigeration Block Ice Making Machine Machine: ● Direct Cooling Refrigeration Type Block Ice Making Machine ● Capacity: 5,000 Kg In Single Production @ 12 Hours ● Weight Of Blocks: 50 Kg/block ● Single Production Quantity: 100 Blocks ● Fully Automated Machine ● Ice Lifting Plate With Lifting Mechanism ● With Lock Mechanism ● Integrated Unit And Compact Design. Refrigeration System Includes: ● Compressor: 40hp Minimum ● 380v, 50hz, 3phase ● Number Of Compressors: 1 Unit ● Compressor Type: Screw Compressor ● Refrigerant Charge: R404a ● Oil Separator (coalescent) ● Oil Reservoir ● Oil Filter Drier ● Oil Level Regulator ● Condenser: Shell And Tube ● Cooling Tower: Water Cooled With Fan And Cooling Tower Pump ● Liquid Receiver With Level Sensors And Float Switch ● Liquid Filter Drier ● Expansion Valve ● Evaporator With Seals ● Evaporator Pressure Regulator ● Accumulator ● Suction Filter ● Evaporator Pressure Regulator ● Valves (check Valves, Isolation Valves, Pressure Relief Valve, Actuator, Stop Valve, Solenoid Valve) ● Piping ● Insulation For The Piping ● Automatic Electric Control Panel With Timers And Sensors ● With Defrost Ice Block Molder (evaporator) ● Direct Heat Exchange Method ● Direct Cooling Plate Type Heat Exchanger ● Number Of Evaporators: 1 Set ● Material: Aluminum Alloy/sus304 Stainless Steel ● Evaporating Temperature: -15 Degrees Celsius ● Seals: Silicone ● Ice Comply With Food Hygiene Standard Requirements For Water Feeding Line ● Automatic Water Feeding Function With Water Level Control ● Water Feeding Pipes ● Water Pumps With Sensors And Switch ● Water Filters ● Water Level Sensor ● Passive Reservoir Control ● Plumbing Installation From The Desalination Machine To The Ice Machine Included Instrumentations ● Pressure Differential Indicator Or Switch For Inlet And Outlet Of Oil Separator And Liquid Filter Driers ● Low And High Pressure Switch ● Pressure Transducers ● Temperature Sensors ● Level Sensors ● Sight Glass For Oil Line And Liquid Refrigerant Line ● Temperature Gauges And Pressure Gauges ● Others Useful Sensor Cold Storage ● 3mx2mx2.5m Dimension ● Temperature: -10 Degree Celsius ● Refrigerant : R404a ● Cooling System : Air Cooling ● Compressor : Screw Compressor ● 220v, 60hz, 3phase ● Air Cooler : Dd30 ( 1 Set ) ● Insulation Panels Thickness : 100mm Material (wall, Ceiling ) : Double-side Color Bond Steel Pu Panels ● Door Size : 0.8mx1.8m Thickness : 100mm Quantity : 1 Pieces Material : Double-side Color Bond Steel Pu Panels 115kw Solar Panels, 150kva Inverter And 152kwh Battery ● 115 Kw ● Solar Panels: 210pcs (550w) Bi-facial ● Mppt Charge Controller: 384v, 200a ● Lifepo4 Battery: 152kwh (380v400ah) ● Off Grid Inverter, 150 Kva, 3ph, 380v ● Ground Pv Mount Component And Steel Structure ● Cable And Electrical Supply Location Working Conditions: ● Power Supply: 380v, 60hz, 3 Phase; ● Standard Ambient Temperature: 35 Degrees Celsius ● Standard Water Temperature: 27 Degrees Celsius Warranty: ● Compressor: 5 Years ● Evaporator: 5 Years ● Condenser: 5 Years ● Cooling Tower: 3 Year ● 1 Year Workmanship Warranty ● Inverter : 5 Years Replacement ● Solar Panels And Battery: 10 Years ● Overall Power Warranty: 20 Years ● 1000 Liters Per Hour Solar Seawater Desalination Machine ● Pro Filter ● Softener System ● Reverse Osmosis Host Machine ● Plc Touch Screen ● Uv System ● Liquid Level Sensor ● 500 Liters Raw Water Storage Tank ● 500 Liters Pure Water Storage Tank Heavy Duty Ice Crusher ● Capacity: 25kg Ice Block 150 Kva Generator Set O Year Model: Manufacturers Current Model O Brand New O Packaged Diesel Engine Generator Set O Stand-by Power O Generator Is Use To Power The 1-unit 5 Tons Capacity Ice Plant And Cold Storage During Power Interruption ● Performance: O Apparent Power: 150kva (minimum) O Phase: 3-phase O Output Frequency: 60hz O Power Factor: 0.8 O Voltage Output: 220v O Amperes: 460a O Engine Configuration: Diesel Engine, Turbocharged O Number Of Cylinder: 4-cylinder In-line (minimum) O Cooling System: Water Cooled O Fuel Type: Diesel Fuel ● With Weather Proof Enclosure ● Start System With Maintenance Free Battery ● Battery Charger/alternator ● Batteries ● With Lubricating Oil System ● Fuel Injection System ● Air Induction And Exhaust System, ● With Radiator Pipes For Cooling System ● Exhaust Pipe ● All Necessary Filters, Instruments, Valves, Piping, Fittings, Ducts Etc. ● Instruments: Temperature Indicators For Lube Oil Temperature And Pressure Gauges For Lube Oil, Fuel Oil, Cooling Water System, ● Standard Fuel Tank Capacity ● Power Generator ● The Complete Generator Set Is Mounted As Whole On A Heavy-duty Fabricated, Steel Base Frame. ● Anti-vibration Pads Fixed Between The Engine Feet And Base Frame ● With Foundation Pedestal Post ● Automatic Transfer Switch (ats)/automatic Start-stop System ● Control Panel With Metering Devices ● Installation Of Power Cables From The Generator Set To The Ats, Cable Pulling And Termination ● Installation Of Flexible Pipe And Ats Mounting ● Termination Of Control Wires From Generator Set To Ats ● Main Line Circuit Breaker ● Wires And ● Thermal Lugs ● Conduit Pipes ● Safety Requirements: O Equipped With Safety/precautionary Markings Which Shall Be Weather Resistant And Under Normal Cleaning Procedures, Shall Not Fade, Discolor Crack Or Blister And Remain Legible. ● Maintenance: With The Following Standard Heavy-duty Tools And Accessories: O Three (3) Pieces Open Wrench O One (1) Piece Of Philips Or Cross-tip Screw Driver O One (1) Piece Of Flat Screw Driver O One (1) Piece Of Mechanical Pliers O One (1) Piece Of Adjustable Wrench O With Heavy Duty Toolbox And Roll Up Tool Holder ▪ Size That Could Accommodate The List Of Tools ▪ Material: Metal Or Plastic O One (1) Original Equipment Manufacturer Manual (oem) Written In English For: ▪ Parts ▪ Service ▪ Users/operators ● Warranty And After-sales Service: O The Distributor/dealer Shall: ▪ Provide After-sales Services Free Of Charge If The Machine Is Still Under Warranty And Change At Reasonable Cost For Services That Are Already Out Of Warranty; ▪ Maintain Spare Parts Of At Least 10% Of Their Average Past Three-year Sales Per Product To Ensure Inventory If Fast-moving Spare Parts; ▪ Provide After Sales Service Within 72 Hours Upon The Receipt Of Complaints/request; And ▪ Provide Training On The Operation, Repairs And Maintenance Of The Agricultural And Fisheries Machinery. ● The Distributor/dealer Shall Include Testing/commissioning On Site. O The Distributor/dealer Shall Provide Test Materials And Lubricants For Testing/commissioning. ● Reflectorized Mafar Logo O With Reflectorized Mafar-barmm Logo (10 Inches Diameter) With Text Mafar-barmm Bangsamoro Appropriations Act Fund Cy-2024 (2 Inches Height) O The Mafar Logo Shall Be Placed At A Visible Position In The Machine Which Could Either Be Painted Or Made Up Of An All-weather Reflectorized Sticker. Scope Of Works ● Supply And Installation Of Ice Block Machine Including Electrical Component ● Supply And Installation Of Cold Storage Including Electrical Component ● Supply And Installation Of Solar Panel, Inverter, Battery Including All Electrical Component To Power The Ice Block Machine And Cold Storage ● Supply And Installation Of Generator Set Including All Electrical Component To Power The Ice Block Machine And Cold Storage ● Testing And Decommissioning Period Of Delivery: 45 Days After The Receipt Of Ntp · Goods Must Be Delivered To The Warehouse Of The Winning Bidder Within 90 Calendar Days After The Receipt Of The Notice To Proceed (ntp). · 6000 Liters Raw Water Storage Tank For Water Desalination · 6000 Liters Pure Water Storage Tank For Water Desalination · Heavy Duty Ice Crusher Capacity: 50kg Ice Block · Supply, Delivery And Installation Of 1000l/hr Water Desalination Machine (additional Scope Of Work) · Certificate Of Site Visitation Issued By Mafar Regional Engineering Division. · Duly Notarized Affidavit Of Site Inspection. · The Supplier Must Have National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Certificate. · The Supplier Must Have Bureau Of Agriculture And Fisheries Engineering Permit To Operate Certificate Bafe-pto. Standard Tools And Accessories: • Each Unit Is Provided With A Manufacturer's Set Of Standard Tools For Repair And Maintenance. • With Fire Extinguisher • With Lighting Arrester • Operators’ Handbook (printed And Electronic Copy) In English Trainings Upon Delivery, The Supplier Must Provide A Theoretical And Practical (hands-on) Training For Approximately 5-10 Participants On-site Per Area. The Training Shall Include The Following: • Safe And Proper Operation Of The Machine • Routine Maintenance Procedures • Troubleshooting Common Issues