Solar Power Plant Tenders

Details: Description:- Design, Supply, Installation, Testing And Commissioning Of "on Grid" Solar Photovoltaic Power plant With Required Solar Mono Crystalline Pv Modules, Ms Hot Dipped Galvanized Structure For Mounting Of panels, Suitable Power Conditioning Units Able To Adjust Voltage And Frequency Level To Suit The Grid Voltage frequency, Array And Main Junction Boxes With Ip 65 Protection, Required Ac And Dc Distribution Boards With switchgear, Armoured Power And Control Cables, Remote Data Monitoring System, Concerned State Electricity Board approved Bidirectional Energy Metering System (net Metering Applicable As Per Availability Of Power Supply Lt Or ht);htmeteringcubicleenclosurewithbusbar,changeoverarrangement,currenttransformers,solar generation Meter Box As Required, Earthing Arrangements, Suitable Lightening And Surge Protection As Per Detailed specifications Including All Necessary Allied Works/accessories As Per Site Condition, Liaison, Registration, Inspection and Any Other Charges Of Discoms Shall Be Borne By Contractor. The Successful Contractor Shall Survey The proposed Sites And Submit The Gad For Approval To Sr. Divisional Electrical Engineer (power) Vadodara Before commencing The Work. The Work Shall Be Warranted For A Period Of Five Years From The Date Of Completion. detailed Technical Specifications Are Given In Annexure-xx Of Tender Document.

Details: Description:- Design, Supply, Erection, Testing And Commissioning Of Grid Connected Rooftop Solar Pv System With mono Crystalline Panel Complete With All Accessories, Monitoring System, Inverter, Structure, Cables, Net Metering etc Complete With Five Years' Warrantee - Design, Supply, Installation, Testing And Commissioning Of "on Grid" solar Photovoltaic Power Plant With Required Solar Mono Crystalline Pv Modules, Ms Hot Dipped Galvanized structure For Mounting Of Panels, Suitable Power Conditioning Units Able To Adjust Voltage And Frequency Level To suit The Grid Voltage Frequency, Array And Main Junction Boxes With Ip 65 Protection, Required Ac And Dc distributionboardswithswitchgear,armouredpowerandcontrolcables,remotedatamonitoringsystem, concerned State Electricity Board Approved Bidirectional Energy Metering System (net Metering Applicable As Per availability Of Power Supply Lt Or Ht); Ht Metering Cubicle Enclosure With Bus Bar, Changeover Arrangement, current Transformers, Solar Generation Meter Box As Required, Earthing Arrangements, Suitable Lightening And surgeprotectionasperdetailedspecificationsincludingallnecessaryalliedworks/accessoriesaspersite condition, Liaison, Registration, Inspection And Any Other Charges Of Discoms Shall Be Borne By Contractor. The successful Contractor Shall Survey The Proposed Sites And Submit The Gad For Approval To Sr. Divisional Electrical engineer (power) Vadodara Before Commencing The Work. The Work Shall Be Warranted For A Period Of Five Years from The Date Of Completion. Detailed Technical Specifications Are Given In Annexure-xx Of Tender Document.

Details: Description:- Design, Supply, Installation, Testing And Commissioning Of "on Grid" Solar Photovoltaic Power Plant With Required Solar Mono crystalline Pv Modules, Ms Hot Dipped Galvanized Structure For Mounting Of Panels, Suitable Power Conditioning Units Able To Adjust Voltage And frequency Level To Suit The Grid Voltage Frequency, Array And Main Junction Boxes With Ip 65 Protection, Required Ac And Dc Distribution Boards With switchgear, Armoured Power And Control Cables, Remote Data Monitoring System, Concerned State Electricity Board Approved Bidirectional Energy metering System (net Metering Applicable As Per Availability Of Power Supply Lt Or Ht); Ht Metering Cubicle Enclosure With Bus Bar, Changeover arrangement, Current Transformers, Solar Generation Meter Box As Required, Earthing Arrangements, Suitable Lightening And Surge Protection As Per detailed Specifications Including All Necessary Allied Works/accessories As Per Site Condition, Liaison, Registration, Inspection And Any Other Charges Of discoms Shall Be Borne By Contractor. The Successful Contractor Shall Survey The Proposed Sites And Submit The Gad For Approval To Sr. Divisional electrical Engineer (power) Vadodara Before Commencing The Work. The Work Shall Be Warranted For A Period Of Five Years From The Date Of completion. Detailed Technical Specifications Are Given In Annexure-xx Of Tender Document. The Tentative Sites Of Work Are Given In Annexure-xxi Of tender Document.

Details: This contract concerns the acquisition and installation of an autonomous hybrid solar power plant composed of a solar field, a battery bank, a generator and a wind demonstrator on one of the terraces of building F (says La Recherche) On the site of the IUT de Ville d'Avray, within the University of Paris Nanterre.

Details: Description:- Design, Supply, Erection, Testing & Commissioning Of "on Grid Solar Roof Top Photovoltaic Power plant Of Capacity 145kwp" In The Following Locations Of Icf Comprising Of Spv Modules, Mounting Structures, power Conditioning Units, Junction Boxes, Distribution Boxes Cables & Wires, Lightning Arrestor, Earthing Kits, Pvc pipes& Accessories And Monitoring System As Per Icf Specification. Location 1 - Arun Stadium - 25 Kwp, location 2 - Shell Factory Canteen - 30 Kwp, Location 3 - Furnishing Canteen - 40 Kwp, Location 4 - Officer's rest House/perambur - 40 Kwp, Location 5 - Rpf Hostel - 10 Kwp".

Details: The Contractor's Goal Is to Increase the Energy Efficiency of the Building. Works to be carried out to achieve the goal: • Replacement of open fillings; • Reconstruction of the heating system; • Construction of the ventilation system; • Renovation of the electrical system; • Construction of a solar power plant; • Construction of a Hot Domestic Water System; • Renovation of water and sewage lines

Details: Technology Licensing Opportunity electric Current Enhanced Diffusion Welding For Manufacturing High-temperature Compact Heat Exchangers a New Approach To Fabricating Compact Heat Exchangers For High-temperature Applications opportunity: Idaho National Laboratory (inl), Managed And Operated By Battelle Energy Alliance, Llc (bea), Is Offering To Enter Into A License Or Collaborative Research Agreement To Commercialize This New Diffusion Welding Technology For Manufacturing High-temperature Compact Heat Exchangers. This Technology Transfer Opportunity Is Part Of A Dedicated Effort To Convert Government-funded Research Into Job Opportunities, Businesses, And, Ultimately, An Improved Way Of Life For The American People. overview: Diffusion Welding Of High-temperature Materials Such As Alloy 617 Is Technically Challenging, Costly, And In Some Cases, Nearly Impossible Due To Surface Preparation Needs, Residual Porosity, Precipitate Formation At Weld Interfaces, And Significantly Reduced Elevated-temperature Mechanical Properties. Researchers At Inl Have Developed A Method To Overcome These Challenges Through Electric Current Enhanced Diffusion Welding Enabled By Spark Plasma Sintering (sps). this New Process Enables Cost-effective Fabrication Of Compact Heat Exchangers For Elevated-temperature Applications Such As Nuclear Microreactors And Concentrated Solar Power Plants. Experiments Have Demonstrated That Alloy 617 Components Joined With This Process Have Superior Grain Growth Across The Interfaces, Which Is Critical To Acquire Mechanical Properties Like The Base Metal. This Technique Overcomes Challenges With The Existing Diffusion Welding Techniques. the Primary Challenge In The Current State Of The Art Of Sps Processing Is The Limited Capacity To Manufacture Large Parts, Such As Heat Exchanger Components. However, Inl's Recently Designed And Built Dcs-800 Unit, The Most Extensively Known Sps System In The World, Will Be Able To Fabricate Plates That Meet The Size Requirements To Qualify For Diffusion Welding. benefits: superior Grain Growth Across The Component Interface And Eliminate Diffusion Welding Interfaces. the Diffusion Welds Are Homogenous Across The Width Of The Plate. limit Precipitate Formation At The Interface. enhanced Performance In Grain Boundary Migration Compared To Previous Studies. improved Overall Weld Quality Using Efas Compared To Hot Pressing And Hot Isostatic Pressing Methods. significant Energy Savings (70–90%) In Manufacturing Compact Heat Exchangers Compared With Diffusion Welding Using Hot Pressing And Hot Isostatic Pressing. target Applications: fabrication Of Compact Heat Exchangers For Elevated-temperature Applications, Including Advanced Nuclear Reactors, Concentrated Solar Power, And Chemical Processing Plants. development Status: Trl 3; Undergoing Proof-of-concept Work. ip Status: Patent Application No. 18/183,513, “methods Of Forming Articles By Applying Electric Current And Pressure To Materials, And Related Articles,” Bea Docket No. Ba-1335. additional Information: zhang, X, Rupp, Re, Rufner, Jf, & Mcmurtrey, Md. "electric-field-assisted Diffusion Welding To Fabricate Alloy 617 Compact Heat Exchangers." Proceedings Of The . Volume 4a: Materials And Fabrication. Las Vegas, Nevada, Usa. July 17–22, 2022. V04at06a005. Asme. Https://doi.org/10.1115/pvp2022-83842 inl Seeks To License The Above Intellectual Property To A Company With A Demonstrated Ability To Bring Such Inventions To The Market. Exclusive Rights In Defined Fields Of Use May Be Available. Added Value Is Placed On Relationships With Small Businesses, Start-up Companies, And General Entrepreneurship Opportunities. please Visit Technology Deployment’s Website At Https://inl.gov/inl-initiatives/technology-deployment For More Information On Working With Inl And The Industrial Partnering And Technology Transfer Process. companies Interested In Learning More About This Licensing Opportunity Should Contact Andrew Rankin At Td@inl.gov.

Description: CATEGORY: Temperature controlled Soldering Iron , Solar Insulation m Weather monitoring station , Solar cell based sunlight radi meter , Solar simulator for solar cell characteristic study , I tester , Sun path finder , Solar energy trainer with groupin solar cells , Solar tracker demonstrator kit , Motorized Ben Grinder , Array junction box , Solar lantern assembly sets , light system , Solar cell kit , Clinometer , DC table fan , A.C Energy Meter , Kilo Wattmeter Analog , Digital Wattmeter , Sequence Indicator , DC LED Lamp , DC Pump , PWM Contr MPPT Charge Controller , Solar PCU , Solar Grid tied invert Demonstrator kit , Solar, wind and hybrid power plant , Sol Traffic Light , Used water treatment solar plant demonstrat solar DC pump , Demonstration kit for wind generation Wi turbine with blower , Rechargeable battery , Halogen lamp stand for illumination of solar panels in lab , Solar Charge controller with Dusk to Dawn automatic switching , Solar c controller with manual switch Day lighting , Combination Pl Insulated , Electrician screw driver thin stem insulated han Heavy Duty Screw Driver insulated , Electrician Screw Driv stem insulated handle , Punch Centre , Knife Double Blade Electrician , Neon Tester , Steel Rule Graduated both in Me English Unit , Hand Vice , Table Vice , Hacksaw frame with File flat , File half round , File round , Pliers long nose insul Pliers flat nose insulated , D.E. metric Spanner Double End Portable Electric Drill Machine , Pliers Side Cutting , Wire st adjustable length , Hammer ball peen With handle , Scribe Knurled centre position , Tool kit Box bag portable , Scisso , Load Bank variable type , Wire Cutter and Stripper , Earth Earth Electrode , Out Side Micrometer , Tap set , Die for Th , Thermometer Digital

Details: The facade and roof of the apartment building have been reconstructed, the openings have been replaced with the previous kredex measure. With this measure, we would like to reconstruct the boiler house, switch from wood heating to earth heating, with the installation of a two-pipe heating system and a central hot water system. A Heat Recovery Ventilation System will be installed. A New Electrical Installation will be partially installed along with a Solar Power Plant. The Initial Situation will be Restored After the Works Described Above, the Tender Must Include a 5% Reserve Duration of the Procurement Contract Includes the Procurement Preparation Period

Description: CATEGORY: EPC 14MWp Solar Plant BSES Rajdhani DISCOM , Land Lease Agreement value 1st YEAR , Land Lease Agreement value 2nd YEAR , Land Lease Agreement value 3rd YEAR , Land Lease Agreement value 4th YEAR , Land Lease Agreement value 5th YEAR , Land Lease Agreement value 6th YEAR , Land Lease Agreement value 7th YEAR , Land Lease Agreement value 8th YEAR , Land Lease Agreement value 9th YEAR , Land Lease Agreement value 10th YEAR , Land Lease Agreement value 11th YEAR , Land Lease Agreement value 12th YEAR , Land Lease Agreement value 13th YEAR , Land Lease Agreement value 14th YEAR , Land Lease Agreement value 15th YEAR , Land Lease Agreement value 16th YEAR , Land Lease Agreement value 17th YEAR , Land Lease Agreement value 18th YEAR , Land Lease Agreement value 19th YEAR , Land Lease Agreement value 20th YEAR , Land Lease Agreement value 21st YEAR , Land Lease Agreement value 22nd YEAR , Land Lease Agreement value 23rd YEAR , Land Lease Agreement value 24th YEAR , Land Lease Agreement value 25th YEAR , Land Lease Agreement value 26th YEAR , Land Lease Agreement value 27th YEAR , Power evacuation set up for 1MW , Power evacuation set up for 1.5 MW , Power evacuation set up for 2 MW , Power evacuation set up for 2.5 MW , Power evacuation set up for 3 MW , Power evacuation set up for 3.5 MW , Power evacuation set up for 4 MW , COMC Post Defect Liability Period for 1st Year , COMC Post Defect Liability Period for 2nd Year , COMC Post Defect Liability Period for 3rd Year , COMC Post Defect Liability Period for 4th Year , COMC Post Defect Liability Period for 5th Year , COMC Post Defect Liability Period for 6th Year , COMC Post Defect Liability Period for 7th Year , COMC Post Defect Liability Period for 8th Year , COMC Post Defect Liability Period for 9th Year , COMC Post Defect Liability Period for 10th Year , EPC 14MWp Solar Plant Tata Power DISCOM