Solar Power Plant Tenders

Details: Description:- Design, Supply, Erection, Testing & Commissioning Of "on Grid Solar Roof Top Photovoltaic Power plant Of Capacity 145kwp" In The Following Locations Of Icf Comprising Of Spv Modules, Mounting Structures, power Conditioning Units, Junction Boxes, Distribution Boxes Cables & Wires, Lightning Arrestor, Earthing Kits, Pvc pipes& Accessories And Monitoring System As Per Icf Specification. Location 1 - Arun Stadium - 25 Kwp, location 2 - Shell Factory Canteen - 30 Kwp, Location 3 - Furnishing Canteen - 40 Kwp, Location 4 - Officer's rest House/perambur - 40 Kwp, Location 5 - Rpf Hostel - 10 Kwp".

Details: The Contractor's Goal Is to Increase the Energy Efficiency of the Building. Works to be carried out to achieve the goal: • Replacement of open fillings; • Reconstruction of the heating system; • Construction of the ventilation system; • Renovation of the electrical system; • Construction of a solar power plant; • Construction of a Hot Domestic Water System; • Renovation of water and sewage lines

Details: Technology Licensing Opportunity electric Current Enhanced Diffusion Welding For Manufacturing High-temperature Compact Heat Exchangers a New Approach To Fabricating Compact Heat Exchangers For High-temperature Applications opportunity: Idaho National Laboratory (inl), Managed And Operated By Battelle Energy Alliance, Llc (bea), Is Offering To Enter Into A License Or Collaborative Research Agreement To Commercialize This New Diffusion Welding Technology For Manufacturing High-temperature Compact Heat Exchangers. This Technology Transfer Opportunity Is Part Of A Dedicated Effort To Convert Government-funded Research Into Job Opportunities, Businesses, And, Ultimately, An Improved Way Of Life For The American People. overview: Diffusion Welding Of High-temperature Materials Such As Alloy 617 Is Technically Challenging, Costly, And In Some Cases, Nearly Impossible Due To Surface Preparation Needs, Residual Porosity, Precipitate Formation At Weld Interfaces, And Significantly Reduced Elevated-temperature Mechanical Properties. Researchers At Inl Have Developed A Method To Overcome These Challenges Through Electric Current Enhanced Diffusion Welding Enabled By Spark Plasma Sintering (sps). this New Process Enables Cost-effective Fabrication Of Compact Heat Exchangers For Elevated-temperature Applications Such As Nuclear Microreactors And Concentrated Solar Power Plants. Experiments Have Demonstrated That Alloy 617 Components Joined With This Process Have Superior Grain Growth Across The Interfaces, Which Is Critical To Acquire Mechanical Properties Like The Base Metal. This Technique Overcomes Challenges With The Existing Diffusion Welding Techniques. the Primary Challenge In The Current State Of The Art Of Sps Processing Is The Limited Capacity To Manufacture Large Parts, Such As Heat Exchanger Components. However, Inl's Recently Designed And Built Dcs-800 Unit, The Most Extensively Known Sps System In The World, Will Be Able To Fabricate Plates That Meet The Size Requirements To Qualify For Diffusion Welding. benefits: superior Grain Growth Across The Component Interface And Eliminate Diffusion Welding Interfaces. the Diffusion Welds Are Homogenous Across The Width Of The Plate. limit Precipitate Formation At The Interface. enhanced Performance In Grain Boundary Migration Compared To Previous Studies. improved Overall Weld Quality Using Efas Compared To Hot Pressing And Hot Isostatic Pressing Methods. significant Energy Savings (70–90%) In Manufacturing Compact Heat Exchangers Compared With Diffusion Welding Using Hot Pressing And Hot Isostatic Pressing. target Applications: fabrication Of Compact Heat Exchangers For Elevated-temperature Applications, Including Advanced Nuclear Reactors, Concentrated Solar Power, And Chemical Processing Plants. development Status: Trl 3; Undergoing Proof-of-concept Work. ip Status: Patent Application No. 18/183,513, “methods Of Forming Articles By Applying Electric Current And Pressure To Materials, And Related Articles,” Bea Docket No. Ba-1335. additional Information: zhang, X, Rupp, Re, Rufner, Jf, & Mcmurtrey, Md. "electric-field-assisted Diffusion Welding To Fabricate Alloy 617 Compact Heat Exchangers." Proceedings Of The . Volume 4a: Materials And Fabrication. Las Vegas, Nevada, Usa. July 17–22, 2022. V04at06a005. Asme. Https://doi.org/10.1115/pvp2022-83842 inl Seeks To License The Above Intellectual Property To A Company With A Demonstrated Ability To Bring Such Inventions To The Market. Exclusive Rights In Defined Fields Of Use May Be Available. Added Value Is Placed On Relationships With Small Businesses, Start-up Companies, And General Entrepreneurship Opportunities. please Visit Technology Deployment’s Website At Https://inl.gov/inl-initiatives/technology-deployment For More Information On Working With Inl And The Industrial Partnering And Technology Transfer Process. companies Interested In Learning More About This Licensing Opportunity Should Contact Andrew Rankin At Td@inl.gov.

Description: CATEGORY: Temperature controlled Soldering Iron , Solar Insulation m Weather monitoring station , Solar cell based sunlight radi meter , Solar simulator for solar cell characteristic study , I tester , Sun path finder , Solar energy trainer with groupin solar cells , Solar tracker demonstrator kit , Motorized Ben Grinder , Array junction box , Solar lantern assembly sets , light system , Solar cell kit , Clinometer , DC table fan , A.C Energy Meter , Kilo Wattmeter Analog , Digital Wattmeter , Sequence Indicator , DC LED Lamp , DC Pump , PWM Contr MPPT Charge Controller , Solar PCU , Solar Grid tied invert Demonstrator kit , Solar, wind and hybrid power plant , Sol Traffic Light , Used water treatment solar plant demonstrat solar DC pump , Demonstration kit for wind generation Wi turbine with blower , Rechargeable battery , Halogen lamp stand for illumination of solar panels in lab , Solar Charge controller with Dusk to Dawn automatic switching , Solar c controller with manual switch Day lighting , Combination Pl Insulated , Electrician screw driver thin stem insulated han Heavy Duty Screw Driver insulated , Electrician Screw Driv stem insulated handle , Punch Centre , Knife Double Blade Electrician , Neon Tester , Steel Rule Graduated both in Me English Unit , Hand Vice , Table Vice , Hacksaw frame with File flat , File half round , File round , Pliers long nose insul Pliers flat nose insulated , D.E. metric Spanner Double End Portable Electric Drill Machine , Pliers Side Cutting , Wire st adjustable length , Hammer ball peen With handle , Scribe Knurled centre position , Tool kit Box bag portable , Scisso , Load Bank variable type , Wire Cutter and Stripper , Earth Earth Electrode , Out Side Micrometer , Tap set , Die for Th , Thermometer Digital

Details: The facade and roof of the apartment building have been reconstructed, the openings have been replaced with the previous kredex measure. With this measure, we would like to reconstruct the boiler house, switch from wood heating to earth heating, with the installation of a two-pipe heating system and a central hot water system. A Heat Recovery Ventilation System will be installed. A New Electrical Installation will be partially installed along with a Solar Power Plant. The Initial Situation will be Restored After the Works Described Above, the Tender Must Include a 5% Reserve Duration of the Procurement Contract Includes the Procurement Preparation Period

Description: CATEGORY: EPC 14MWp Solar Plant BSES Rajdhani DISCOM , Land Lease Agreement value 1st YEAR , Land Lease Agreement value 2nd YEAR , Land Lease Agreement value 3rd YEAR , Land Lease Agreement value 4th YEAR , Land Lease Agreement value 5th YEAR , Land Lease Agreement value 6th YEAR , Land Lease Agreement value 7th YEAR , Land Lease Agreement value 8th YEAR , Land Lease Agreement value 9th YEAR , Land Lease Agreement value 10th YEAR , Land Lease Agreement value 11th YEAR , Land Lease Agreement value 12th YEAR , Land Lease Agreement value 13th YEAR , Land Lease Agreement value 14th YEAR , Land Lease Agreement value 15th YEAR , Land Lease Agreement value 16th YEAR , Land Lease Agreement value 17th YEAR , Land Lease Agreement value 18th YEAR , Land Lease Agreement value 19th YEAR , Land Lease Agreement value 20th YEAR , Land Lease Agreement value 21st YEAR , Land Lease Agreement value 22nd YEAR , Land Lease Agreement value 23rd YEAR , Land Lease Agreement value 24th YEAR , Land Lease Agreement value 25th YEAR , Land Lease Agreement value 26th YEAR , Land Lease Agreement value 27th YEAR , Power evacuation set up for 1MW , Power evacuation set up for 1.5 MW , Power evacuation set up for 2 MW , Power evacuation set up for 2.5 MW , Power evacuation set up for 3 MW , Power evacuation set up for 3.5 MW , Power evacuation set up for 4 MW , COMC Post Defect Liability Period for 1st Year , COMC Post Defect Liability Period for 2nd Year , COMC Post Defect Liability Period for 3rd Year , COMC Post Defect Liability Period for 4th Year , COMC Post Defect Liability Period for 5th Year , COMC Post Defect Liability Period for 6th Year , COMC Post Defect Liability Period for 7th Year , COMC Post Defect Liability Period for 8th Year , COMC Post Defect Liability Period for 9th Year , COMC Post Defect Liability Period for 10th Year , EPC 14MWp Solar Plant Tata Power DISCOM

Details: Description:- Supply, Installation, Testing And Commissioning Of On-grid, Rooftop Mounted Solar Photovoltaic power Plants Of 05 To 50 Kwp Capacity, Net Metering Type, To Be Installed At Various Buildings / Covered Platforms at Different Railway Stations (56 Nos) Under Hubballi Division. Conforming To Mnre Specifications As Amended and As Per Tender Conditions. The Plant Consisting Of Mono Crystalline Silicon Solar Cells, Net Metering Facility, necessary Protections, Earthing, Mounted On Gi Structure Suitable As Per Site Requirements And Withstand A Wind velocity Of 150 Kms Per Hour. Carrying Out Maintenance For A Period Of 36 Months After Completion Of The Work including Following Components Complete As Required:- A) Solar Photovoltaic Module Of Capacity 330 Wp Or Above, manufacturedinindia,conformingtois14286/iec61215,is/iec61730-part1,is/iec61730-part-2.solar photovoltaicmoduleconversionefficiencyshallnotbelessthan16.5%.pvmodulesusedinsolarpower plants/systems Must Be Warrantied For Their Output Peak Watt Capacity, Which Should Not Be Less Than 90% At The end Of 10 Years And 80% At The End Of 25 Years. B) Power Conditioning Unit (pcu) Of 250-800 V Dc Input Voltage range And 400 V Ac, Three Phase, 50hz+/-2.5hz,, 50hz+/-2.5hz, Output Voltage Suitable To Generate Ac Power with Efficiency Not Less Than 97%, Total Harmonic Distortion Less Than 3% And Suitable For Ambient Temperature from 0 To 50 Degree C. The Pcu Shall Adjust The Voltage And Frequency Level To Suit The Grid Voltage Frequency. all Outdoor Panels Must Be Protected With Ip-65 Ratings Or Above. C) Online Data Monitoring System Complete With accessories. D)fixingofarrayjunctionbox&mainjunctionboxwithip65 Protection Andtermination arrangement For Incoming And Outgoing Cable Along With Glands, Lugs And Other Accessories Etc. As Required. E) lightning And Surge Voltage Protection. F) Connections & Interconnections By Supplying & Fixing Required Size, single Core Xlpe Insulated Copper Conductor 1.1 Kv Grade Armored Power And Control Cables For Dc System And xlpe Insulated Armoured, 4 Core Aluminium Conductor Cables Of Suitable Size Between Ac Panel To Domestic Lt panel. Pcu Unit Along With Supplying & Fixing Of Necessary Channel/ Conduit Lugs And Other Accessories Etc. suitable Skid Free Walkway Provision On Sloppy Roof For Cleaning Purpose Wherever Required For Plants More Than 10 Kwp Capacity Complete All As Specified In The Tender Documents And As Directed At Site. Note: Lt Xlpe Ug cable From The Domestic Lt Panel To Grid Supply Connections / Up To Termination Point Will Be Supplied By Railways.

Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Solar Powered Pump Of Quinagaringan Grande Spip Contract Ref. No. : Nia.igimo-carp-ic-quinagaringan Grande Spip-cw31-24 Location : Passi City, Iloilo Approved Budget For The Contract (abc) : Php 4,440,552.81 Contract Duration : 150 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Hydraulic Drilling Rig With Machine 1 Unit – Welding Machine 1 Unit – Generator Set 1 Unit – Water Pump 1 Unit – Dump Truck 1 Unit – 1-bagger Concrete Mixer 1 Unit – Concrete Vibrator 1 Unit – Geo-resistivity Machine 1 Unit – Compressor Brief Description: Supply, Delivery, Installation And Commissioning Of Solar Powered Pump, Pumping Plant, Temp. Works, Occupational Safety & Health Program, Project Billboard Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Five Thousand Pesos (php 5,000.00) To The Nia-igimo Cashier. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – June 18, 2024, 8:30 A.m. 2. Pre-bidding Conference – June 3, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – June 18, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Geraldine G. Cabaobao Bac Vice Chairman Noted: Randy C. Alipis, Mpa Division Manager A Date Of Posting: Philgeps – May 24 – June 18, 2024

Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Solar Powered Pump Of Jalaur Extension Ris Contract Ref. No. : Nia.igimo-repair-nis-jalaur Extension Ris-cw27-24 Location : Dumangas, Iloilo Approved Budget For The Contract (abc) : Php 4,683,005.67 Contract Duration : 150 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Dumptruck 1 Unit – 1 Bagger Concrete Mixer 1 Unit – Concrete Vibrator 1 Unit – Water Pump 1 Unit – Hydraulic Drilling Rig With Machine 1 Unit – Welding Machine 1 Unit – Generator Set 1 Unit – Geo-resistivity Machine Brief Description: Supply, Delivery, Installation, Commissioning Of Solar Powered Pump, Pumping Plant, Bench Flume, Temp. Works, Occupational Safety & Health Program, Project Billboard Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Five Thousand Pesos (php 5,000.00) To The Nia-igimo Cashier. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – May 2, 2024, 9:00 A.m. 2. Pre-bidding Conference – April 19, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – May 2, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Lucy Grace B. Improgo Bac Chairman Noted: Randy C. Alipis, Mpa Division Manager A Date Of Posting: Philgeps – April 12 – May 2, 2024

Details: Description Lot No. Unit Quantity Specifications Approved Budget For Contract Price Of Bid Documents Delivery Period 1 Package 1 Supply, Delivery And Installation Of 5 Metric Tons Ice Plant Machine With Generator Set, Cold Storage And Other Accessories 18,500,000.00 25,000.00 Must Be Completed Within 45 Calendar Days Upon Receipt Of Ntp 2024-03-0526 Specification: 5 Metric Tons, 115 Kw Solar Powered Ice Plant And Cold Storage With 152 Kwh Lifepo4 Battery, 1000l/hour Seawater Desalination Machine And 150kva Generator Project Location: Languyan, Tawi-tawi Detailed Specification: Aluminum Direct Refrigeration Block Ice Making Machine Machine: ● Direct Cooling Refrigeration Type Block Ice Making Machine ● Capacity: 5,000 Kg In Single Production @ 12 Hours ● Weight Of Blocks: 50 Kg/block ● Single Production Quantity: 100 Blocks ● Fully Automated Machine ● Ice Lifting Plate With Lifting Mechanism ● With Lock Mechanism ● Integrated Unit And Compact Design. Refrigeration System Includes: ● Compressor: 40hp Minimum ● 380v, 50hz, 3phase ● Number Of Compressors: 1 Unit ● Compressor Type: Screw Compressor ● Refrigerant Charge: R404a ● Oil Separator (coalescent) ● Oil Reservoir ● Oil Filter Drier ● Oil Level Regulator ● Condenser: Shell And Tube ● Cooling Tower: Water Cooled With Fan And Cooling Tower Pump ● Liquid Receiver With Level Sensors And Float Switch ● Liquid Filter Drier ● Expansion Valve ● Evaporator With Seals ● Evaporator Pressure Regulator ● Accumulator ● Suction Filter ● Evaporator Pressure Regulator ● Valves (check Valves, Isolation Valves, Pressure Relief Valve, Actuator, Stop Valve, Solenoid Valve) ● Piping ● Insulation For The Piping ● Automatic Electric Control Panel With Timers And Sensors ● With Defrost Ice Block Molder (evaporator) ● Direct Heat Exchange Method ● Direct Cooling Plate Type Heat Exchanger ● Number Of Evaporators: 1 Set ● Material: Aluminum Alloy/sus304 Stainless Steel ● Evaporating Temperature: -15 Degrees Celsius ● Seals: Silicone ● Ice Comply With Food Hygiene Standard Requirements For Water Feeding Line ● Automatic Water Feeding Function With Water Level Control ● Water Feeding Pipes ● Water Pumps With Sensors And Switch ● Water Filters ● Water Level Sensor ● Passive Reservoir Control ● Plumbing Installation From The Desalination Machine To The Ice Machine Included Instrumentations ● Pressure Differential Indicator Or Switch For Inlet And Outlet Of Oil Separator And Liquid Filter Driers ● Low And High Pressure Switch ● Pressure Transducers ● Temperature Sensors ● Level Sensors ● Sight Glass For Oil Line And Liquid Refrigerant Line ● Temperature Gauges And Pressure Gauges ● Others Useful Sensor Cold Storage ● 3mx2mx2.5m Dimension ● Temperature: -10 Degree Celsius ● Refrigerant : R404a ● Cooling System : Air Cooling ● Compressor : Screw Compressor ● 220v, 60hz, 3phase ● Air Cooler : Dd30 ( 1 Set ) ● Insulation Panels Thickness : 100mm Material (wall, Ceiling ) : Double-side Color Bond Steel Pu Panels ● Door Size : 0.8mx1.8m Thickness : 100mm Quantity : 1 Pieces Material : Double-side Color Bond Steel Pu Panels 115kw Solar Panels, 150kva Inverter And 152kwh Battery ● 115 Kw ● Solar Panels: 210pcs (550w) Bi-facial ● Mppt Charge Controller: 384v, 200a ● Lifepo4 Battery: 152kwh (380v400ah) ● Off Grid Inverter, 150 Kva, 3ph, 380v ● Ground Pv Mount Component And Steel Structure ● Cable And Electrical Supply Location Working Conditions: ● Power Supply: 380v, 60hz, 3 Phase; ● Standard Ambient Temperature: 35 Degrees Celsius ● Standard Water Temperature: 27 Degrees Celsius Warranty: ● Compressor: 5 Years ● Evaporator: 5 Years ● Condenser: 5 Years ● Cooling Tower: 3 Year ● 1 Year Workmanship Warranty ● Inverter : 5 Years Replacement ● Solar Panels And Battery: 10 Years ● Overall Power Warranty: 20 Years ● 1000 Liters Per Hour Solar Seawater Desalination Machine ● Pro Filter ● Softener System ● Reverse Osmosis Host Machine ● Plc Touch Screen ● Uv System ● Liquid Level Sensor ● 500 Liters Raw Water Storage Tank ● 500 Liters Pure Water Storage Tank Heavy Duty Ice Crusher ● Capacity: 25kg Ice Block 150 Kva Generator Set O Year Model: Manufacturers Current Model O Brand New O Packaged Diesel Engine Generator Set O Stand-by Power O Generator Is Use To Power The 1-unit 5 Tons Capacity Ice Plant And Cold Storage During Power Interruption ● Performance: O Apparent Power: 150kva (minimum) O Phase: 3-phase O Output Frequency: 60hz O Power Factor: 0.8 O Voltage Output: 220v O Amperes: 460a O Engine Configuration: Diesel Engine, Turbocharged O Number Of Cylinder: 4-cylinder In-line (minimum) O Cooling System: Water Cooled O Fuel Type: Diesel Fuel ● With Weather Proof Enclosure ● Start System With Maintenance Free Battery ● Battery Charger/alternator ● Batteries ● With Lubricating Oil System ● Fuel Injection System ● Air Induction And Exhaust System, ● With Radiator Pipes For Cooling System ● Exhaust Pipe ● All Necessary Filters, Instruments, Valves, Piping, Fittings, Ducts Etc. ● Instruments: Temperature Indicators For Lube Oil Temperature And Pressure Gauges For Lube Oil, Fuel Oil, Cooling Water System, ● Standard Fuel Tank Capacity ● Power Generator ● The Complete Generator Set Is Mounted As Whole On A Heavy-duty Fabricated, Steel Base Frame. ● Anti-vibration Pads Fixed Between The Engine Feet And Base Frame ● With Foundation Pedestal Post ● Automatic Transfer Switch (ats)/automatic Start-stop System ● Control Panel With Metering Devices ● Installation Of Power Cables From The Generator Set To The Ats, Cable Pulling And Termination ● Installation Of Flexible Pipe And Ats Mounting ● Termination Of Control Wires From Generator Set To Ats ● Main Line Circuit Breaker ● Wires And ● Thermal Lugs ● Conduit Pipes ● Safety Requirements: O Equipped With Safety/precautionary Markings Which Shall Be Weather Resistant And Under Normal Cleaning Procedures, Shall Not Fade, Discolor Crack Or Blister And Remain Legible. ● Maintenance: With The Following Standard Heavy-duty Tools And Accessories: O Three (3) Pieces Open Wrench O One (1) Piece Of Philips Or Cross-tip Screw Driver O One (1) Piece Of Flat Screw Driver O One (1) Piece Of Mechanical Pliers O One (1) Piece Of Adjustable Wrench O With Heavy Duty Toolbox And Roll Up Tool Holder ▪ Size That Could Accommodate The List Of Tools ▪ Material: Metal Or Plastic O One (1) Original Equipment Manufacturer Manual (oem) Written In English For: ▪ Parts ▪ Service ▪ Users/operators ● Warranty And After-sales Service: O The Distributor/dealer Shall: ▪ Provide After-sales Services Free Of Charge If The Machine Is Still Under Warranty And Change At Reasonable Cost For Services That Are Already Out Of Warranty; ▪ Maintain Spare Parts Of At Least 10% Of Their Average Past Three-year Sales Per Product To Ensure Inventory If Fast-moving Spare Parts; ▪ Provide After Sales Service Within 72 Hours Upon The Receipt Of Complaints/request; And ▪ Provide Training On The Operation, Repairs And Maintenance Of The Agricultural And Fisheries Machinery. ● The Distributor/dealer Shall Include Testing/commissioning On Site. O The Distributor/dealer Shall Provide Test Materials And Lubricants For Testing/commissioning. ● Reflectorized Mafar Logo O With Reflectorized Mafar-barmm Logo (10 Inches Diameter) With Text Mafar-barmm Bangsamoro Appropriations Act Fund Cy-2024 (2 Inches Height) O The Mafar Logo Shall Be Placed At A Visible Position In The Machine Which Could Either Be Painted Or Made Up Of An All-weather Reflectorized Sticker. Scope Of Works ● Supply And Installation Of Ice Block Machine Including Electrical Component ● Supply And Installation Of Cold Storage Including Electrical Component ● Supply And Installation Of Solar Panel, Inverter, Battery Including All Electrical Component To Power The Ice Block Machine And Cold Storage ● Supply And Installation Of Generator Set Including All Electrical Component To Power The Ice Block Machine And Cold Storage ● Testing And Decommissioning Goods Must Be Delivered And Installed Within 45 Calendar Days After The Receipt Of The Notice To Proceed (ntp). Total Abc Php18,500,000.00