Software Tenders

Details: Combined Synopsis/solicitation – Boundary Line Maintenance For B. Everett Jordan Lake, Moncure, Nc solicitation No. W912pm25q0006. This Solicitation Is Issued As An Rfq. this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6 – Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested And A Separate Written Solicitation Will Not Be Issued. This Solicitation Is Being Issued Under The Authority Of Far Part 13 Simplified Acquisition Procedures. This Combined Synopsis/solicitation Is Being Issued As A Small Business Set-aside. this Solicitation Is A Request For Quote (rfq). This Solicitation Document Incorporates Provisions And Clauses In Effect Through Federal Acquisition Circular (fac) 2025-01 Effective November 12, 2024. The Associated North American Industry Classification System (naics) Code For This Procurement Is 561730 With A Size Standard Of $9,500,000.00. the U.s. Army Corps Of Engineers, Wilmington District Is Requesting Services Brush And Tree Limb Cutting, Painting, And Signing Approximately 41 Miles Of Existing United States Government’s Property Boundary To Maintain A Highly Visible Boundary Line At B. Everett Jordan Lake. The Contractor Shall Not Be Establishing New Boundary Lines Or Conducting Any Land Survey Activities. the Resulting Award Issued From This Request Will Result In One Award. Service Contract Act Wage Determination 2015-4393 Rev 27, Dated 07-22-2024 For Wake County, Nc And 2015-4373, Rev 27, Dated 07-22-2024 For Chatham County, Nc Will Apply. The Offeror Is Responsible For Referring To The Wage Determination And Applying It As Applicable. the Following Documents Have Been Provided: a21 - Combined Synopsis-solicitation – Bej Boundary Line Maintenance – W912pm25q0006 - Final questions Are Due Not Later Than 4:00 Pm, Edt, 08 January 2025. quotes Are Due Not Later Than 2:00 Pm, Edt, 17 January 2025. submit Questions & Quotes Electronically Via Email To Both Shaun.m.mckenna@usace.army.mil And Jenifer.m.garland@usace.army.mil. It Is Your Responsibility To Follow Up And Ensure Quotes Have Been Received By The Contract Specialist Prior To The Due Date And Time For Quotes. evaluation Of Award: The Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. Issuance Of Award Will Be Made To The Lowest Price Offeror That Is Technically Acceptable. price Quote And Technical Proposal: Each Offeror Must Submit Both A Price Quote And A Technical Proposal Via Email. The Technical Proposal Shall Include The Documentation In Certification And Documented Past Experience. See Provision 52.212-2 Within The Solicitation. No Hard Copies Will Be Accepted Or Evaluated. Both The Price Quote And Technical Proposal Must Be Received By The Closing Date And Time Set Forth Within The Solicitation. In An Effort To Reduce Paper And Cost, All Quotes Shall Be Submitted Electronically. All Submissions Shall Be In Adobe Pdf Format And Shall Be On 8 ½ X 11 Size Pages In No Less Than 10 Pitch Or 10 Fonts. The Pricing Quote Can Be In Microsoft Excel Spreadsheet Format Provided Within The Solicitation. Offerors May Use Compression Utility Software Such As Winzip Or Pkzip To Reduce Fie Size And Facilitate Electronic Transmission. title File(s) In The Following Format: w912pm25q0006_company Name_pricing w912pm25q0006_company Name_technical in Accordance With Far 52.212-1(k), Each Prospective Awardee Shall Be Registered And Be Active In The Sam Database Prior To Award. If The Offeror Does Not Become Registered In The Sam Database In The Time Prescribed By The Contracting Officer (nlt Due Date/time Of Solicitation), The Contracting Officer Will Proceed To Award To The Next Otherwise Successful Registered Offeror. Offerors May Obtain Information On Registration And Annual Confirmation Requirements Via The Internet At Https://www.sam.gov Or By Calling 866-606-8220, Monday – Friday From 8am – 8pm Est. the Government Reserves The Right To Cancel This Solicitation. this Announcement And Written Request For Quote Constitutes The Only “request For Quote” That Will Be Made For This Requirement.

Details: Description Invitation To Apply For Eligibility And To Bid One (1) Lot Technical & Scientific Equipment-spectrometer Itb No. 2025-01-011 Pr No. 2024-11-351 1. The Mines And Geosciences Bureau, Through The General Appropriations Act (gaa) For Cy 2025 Intends To Apply The Sum Of Seven Million Pesos (php7,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Procurement Of One (1) Lot Technical & Scientific Equipment-spectrometer Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item/description Abc Price Of Bidding Documents One (1) Unit Of Energy Dispersive X-ray Fluorescence Spectrometer (ed-xrf) With Edx Software With Comprehensive Quantitation Functions Php7,000,000.00 Php10,000.00 2. Delivery Of The Goods Is Required By Within The Period Specified In The Bidding Documents Upon Receipt Of Purchased Order (po). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Mgb Website Or Send Email To The Bac Thru The Email Provided Herewith During The Period Of Enhanced Community Quarantine (ecq) And Inspect The Bidding Documents Uploaded In The Website Of Mgb (www.mgb.gov.ph). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Upon Payment Of A Non-refundable Fee As Indicated Above Not Later Than The Schedule Of Submission Of Bids. The Schedule Of Procurement Activities Is Listed As Follows: Activities Date 1. Period Of Availability/issuance Of Bidding Documents Starting: January 7, 2025 7:00 To 4:00 Pm Only (mondays To Fridays) 2. Schedule Of Pre-bid Conference January 15, 2025 @ 10:00am 3. Deadline Of Submission/receipt Of Bidding Documents January 29, 2025 @ 9:00am 4. Opening Of Bids January 29, 2025 @ 10:00am 6. The Mgb Will Hold A Pre-bid Conference On January 15, 2024 At 10:00am Through Video Conferencing Via Microsoft Teams, Which Shall Be Open To Prospective Bidders. Interested Bidders Are Requested To Register At Mgb Online Bidder Registration (please Scan Qr Code) To Be Properly Acknowledged During The Bac Meeting. 7. Bids Must Be Duly Received By The Bac Secretariat. Bidders Must Submit Their Original Bids On The Date And Time Specified In The Above Schedule At Bac Office, Mgb Multipurpose Building, North Avenue, Diliman Quezon City And An Electronic Copy Of Bids. Late Bid/s Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bids Higher Than The Abc Shall Be Automatically Disqualified During The Opening Of Bids. The Opening Of The Bid Shall Be On January 29, 2025, At 10:00am, Via Microsoft Teams Application. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 8. The Mines And Geosciences Bureau Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Information, Please Refer To: Ms. Venus Amor R. Sarmiento Head, Bac Secretariat Bids And Awards Committee North Avenue, Diliman, Quezon City Telephone No. 8932-7693 E-mail: Bac@mgb.gov.ph Website: Www.mgb.gov.ph Engr. Romualdo D. Aguilos Bac Chairperson

Details: Notice Of Intent To Award the Network Contracting Office (nco) 16, Located At Galleria Financial Center, 5075 Westheimer Rd, Ste 750, Houston, Tx 77056, Intends To Solicit And Award Sole Source, Firm-fixed-price, Purchase Order To One Large Business Source, Trillamed, Llc. The Purchase Order Will Be For Central Arkansas Veterans Healthcare System (cavhs) In Little Rock, North Little Rock And All Outlying Community-based Outpatient Clinics (cboc S) In Arkansas. Copeland Cold Chain Lp D/b/a Cooper-atkins Is Original Equipment Manufacturer (oem) For The Temp Trak Temperature And Humidity Sensing Monitoring For The Government Equipment. trillamed, Llc 30100 Telegraph Road, Suite 366 bingham Farms, Mi 48025 contractor Shall Service And Maintenance For The Current System In Place, To Include Any Upgrades/new Hardware To Monitor The Temperature And Humidity Sensors And Data Base For All Required Areas Of Cavhs. Contractor Shall Be On Site To Provide A Health Check Of The System Once A Year And Technical Guidance/assistance As Needed 24 Hours, 7days A Week (24/7). the North American Industry Classification (naics) Code For This Acquisition Is 811210, Electronic And Precision Equipment Repair And Maintenance. Naic Size $34,000,000 this Procurement Is Being Conducted Under Federal Acquisition Regulation (far) Parts 12 And 13.5 In Accordance With (iaw) Far Part 13.501 Soliciting From A Single Source. the Anticipated Award Date Is February 3, 2025. The Government Intends To Award A Firm-fixed-price Contract. v. Please Note That This Is Not A Request For Competitive Quotes And Is Being Posted For Informational Purposes Only. The Government Does Not Anticipate Receiving Responses To This Notice. However, Interested Parties Who Disagree With This Action May Submit A Letter Of Interest That Demonstrates Your Firm S Technical Expertise, Certifications, And Authorization To Compete For This Acquisition To Include A Rationale For Why You Should Be Considered. The Government Reserves The Right To Verify Any Request Additional Documentation Submitted. vi. Interested Parties May Identify Their Interests And Capability To Respond To This Requirement Within Ten (10) Calendar Days Of The Publication Of This Notice. Any Response To This Notice Must Show Clear And Convincing Evidence That Competition Would Be Advantageous To The Government. interested Parties May Identify Their Interest Solely Via Email To Contracting Officer, Anthony Marion, Anthony.marion2@va.gov No Later Than January 17, 2025, 10:00am Central Standard Time (cst). When Responding To This Announcement, Respondents Should Include " 36c25625q0334 Notice Of Intent" In The Subject Line. vii. Late Responses Shall Not Be Accepted. No Telephone Inquiries Will Be Accepted Nor Will Phone calls Be Returned. Only Emailed Responses Will Be Considered. Information Received Will Be utilized Solely For Determining Whether To Conduct A Competitive Procurement. A Determination not To Compete This Proposed Acquisition Based Upon Responses To This Notice Is At The Sole discretion Of The Government. note 1: Contractor Shall Be An Authorize Contractor, Trained Technician, Possess Licenses And Certification For Equipment And Services To Meet All Government Requirement. note 2: Contractor Shall Be Authorized From Copeland Cold Chain Lp D/b/a Cooper-atkins To Service And Provide Maintenance For The Temp Trak Temperature And Humidity Sensing. Evidence Shall Be Submitted By An Authorization Letter Or Other Documents From The Copeland Cold Chain Lp D/b/a Cooper-atkins, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Supplies, Equipment And/or Services Contracts For Maintenance Of Equipment Shall Be In Accordance With The Oem Terms And Conditions. note 3: The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Contractor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Facility Upon Discovery Of Such Items. information Received Will Be Considered Solely For The Purpose Of Determining Whether Or Not To Conduct A Competitive Procurement. A Determination By The Government Not To Compete This Proposed Contract Based Upon Response To This Notice Is Solely Within The Discretion Of The Government. No Reimbursement For Any Cost Connected With Providing Capability Information Will Be Provided. questions Regarding This Notice Should Be Sent To Contracting Officer Anthony Marion No Later Than January 10, 2025 By 9:00am (cst) At Anthony.marion2@va.gov.

Details: Nsn 7r-5998-014744622-v2, Tdp Ver 013, Qty 37 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement.

Details: Description Invitation To Apply For Eligibility And To Bid The Bids & Award Committee Of The Municipality Of Caibiran, Biliran Is Inviting All Interested Bidders On Its Forthcoming Public Bidding For: Project Title : Citizens Charter Information System Location : Lgu, Caibiran, Biliran Delivery Period : 20 Days Abc : P450,000.00 Source Of Funds : Lce Capital 2025 All Particulars Relative To Eligibility Statement And Screening, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of R.a 9184 And Its Revised Implementing Rules And Regulations (rirr) Item No. Quantity Unit Item Description I 1.00 Set Citizens Charter Info Kiosk System • 1 Unit 32” Interactive Kiosk With Power Adapter & Penguin Base Including Software Schedule Of Activities: (1st Posting) Advertisement : January 8, 2025 To January 15, 2025 Bid Evaluation : January 17, 2025 (9:00 Am At The Office Of The Bac Chairman, Municipal Hall Caibiran, Biliran) 1. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 2. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 9, 2025 Until January 16, 2025, Except Holidays & Upon Payment Of The Applicable Fee From The Municipal Treasurer, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos. [p500.00] 3. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Or To The Associated Components Of The Invitation To Bid Provided That Bidders Shall Pay The Applicable Fee Not Later Than The Submission Of Their Bids 4. Bids Must Be Duly Received Together With Official Receipt (o.r.) Issued By The Mun. Treasurer To The Bac Secretary Or To The Bac Chairman On Or Before January 17, 2025 At 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Itb. 5. Bid Evaluation Shall Be On January 17, 2025 At Exactly 9:00 Am At The Office Of The Bac Chairman, Municipal Hall, Caibiran, Biliran. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 6. The Lgu Caibiran Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. Checklist Of Eligibility Requirements For Goods Is Hereto Attached: First Envelope (technical Proposal) Note: All Document To Be Submitted To The Bac Must Be Alphabetically Tabbed According To The Technical Proposal (1st Envelope) & Financial Proposal (2nd Envelope) Eligibility Requirements: Class A Documents 1. Philgeps Platinum Registration In Lieu Of Class A Eligibility Documents Under Section 23.1 (a) & 24.1 (a) All Bidders Shall Upload & Maintain In Philgeps A Current & Updated File Of The Following Class A Eligibility Documents: A. Dti/sec/cda Registration B. Mayors Business Permit Or Its Equivalent Documents C. Tax Clearance Per Executive Order 398 Series 2005 As Finally Reviewed & Stamp Approved By The Bir D. Audited Financial Statement 2. Statement Of On-going Contracts 3. Statement Of Single Largest Completed Contract (slcc) 4. Nfcc Computation Of Committed Line Of Credit Class B Documents 1. Jva Or Notarized Statement From The Partners That They Will Enter Into Joint Ventures If Awarded The Contract. 2. Bid Security (form Of Bid Security) 3. Production/delivery Schedule 4. Manpower Requirement 5. After-sales Services/parts, If Applicable 6. Omnibus Sworn Statement In The Prescribed Form Note: Any Missing, Incomplete Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid. Second Envelope (financial Proposal) 1. Financial Bid Form (include Bid Prices & Bill Of Quantities, As Well As Applicable Price Schedule) 2. Certification If Claiming Preference As Domestic Bidder 3. Other Documents Required In The Bidding Documents Note: Any Missing, Incomplete Or Potentially Insufficient Document In The Above-mentioned Checklist Is A Ground For Outright Rejection Of The Bid 2025philgeps004

Details: Title: Technisches Gebäudemanagement Für Die Liegenschaften Deutsches Historisches Museum In Berlin-mitte Und In Berlin-spandau (vergabenummer Voek 027-24) description: Achtung: Die Anlagen Lv (anl. B-02), Bvb (anl. C-01), Lb (anl. C-02), Wartungsvertr. (anl. C-02_01) Und Lbs (anl. C-03) Sind Nicht Veröffentlicht. Details Hierzu Sind Unter Abs. 5.1.6 Zusätzl. Inform. Pkt. 4 Aufgeführt. --- Mit Dieser Ausschreibung Und Der Projektbegleitenden Steuerung Des Auftragnehmers (an) Über Die Gesamte Laufzeit Des Vertrages Soll Für Die Ausgeschriebenen Leistungen Des Betreibens, Bedienens Und Des Störungsmanagements Der Technischen Anlagen Des Deutschen Historischen Museums Berlin Ein Qualitativ Hochwertiges Gebäudemanagement Zu Wirtschaftlich Günstigen Konditionen Sichergestellt Werden. --- Es Ist Eine Uneingeschränkte Nutzung Des Gebäudes Und Der Technischen Anlagen (365/366 Tage Pro Jahr / 24 Stunden Am Tag) Mit Möglichst Geringfügigen Störungen Und Unterbrechungen Des Dienstbetriebes Anzustreben. --- Die Technischen Anlagen Sind Sind Auf Einem Liegenschaftskomplex Aus 9 Gebäuden, In Berlin-mitte U. Berlin-spandau, Aufgeteilt. Der Gebäudekomplex Ist Ein Sonderbau Gem. Berliner Bauordnung (bauobln). --- Die Leistungen Des An Umfassen Nach Art Und Umfang Sämtliche Maßnahmen, Welche Für Einen Sicheren, Funktionstüchtigen, Wirtschaftlichen Und Umweltschonenden Betrieb Der Liegenschaft, Der Gebäude Und Der Technischen Anlagen Erforderlich Sind Und Die Betreiberpflichten Durch Den An Sicherstellt. Der An Ist Damit U.a. Für Die Zyklische Und Termingerechte Wartung; Inspektion Und Prüfung Während Und Nach Ablauf Der Herstellergewährleistung Vollumfänglich Verantwortlich. Im Rahmen Des Störungsmanagements Gewährleistet Der An 24 Stunden Täglich Und An 365/366 Tagen Im Jahr Einen Störungsdienst. -- Die Geforderten Leistungen Sind Entsprechend Der Din 31051 / En 13306, Din 32736, Den Richtlinien Des Arbeitskreises Maschinen- Und Elektrotechnik Staatlicher Und Kommunaler Verwaltungen (amev) Sowie Der Vdma 24186 Zu Erbringen. --- Weitere Leistungsbestandteile Sind U.a. Das Energie-, Kommunikations- Und Stillstandsmanagement, Ggf. Die Gewährleistungsüberwachung, Alle Wiederholungsprüfungen Durch Sachverständige Für Alle Prüfpflichtigen Anlagen, Die Prüfung Ortsfester Und Ortsveränderlicher Betriebsmittel Und Die Entsorgung. -- Weitere Leistungen Sind Die Der Start-up-phase / Vertragsauslaufphase Mit Der Geordnete Übernahme Der Anlagen Zu Leistungsbeginn Sowie Die Reibungslose Übergabe Nach Leistungsende, Des Instandhaltungsmanagements Und Bereitschaftsdienstes, Der Objektleitung Und Haustechnikleistungen. -- Der An Hat Über Den Durch Vertrag Vereinbarten Leistungsumfang Hinausgehende Aufträge Gegen Entgelt Zu Übernehmen. Dazu Können Bau- Oder Dienstleistungsaufträge In Unterschiedlichem Umfang/auftragswert Gehören. -- Der An Setzt Für Die Bereiche Bürokommunikation (word, Excel, Outlook), Zeiterfassung Der Mitarbeiter Des An, Instandhaltungsplanung, Kaufmännisches Management Und Energiemanagement Eigenständig Moderne Edv- Bzw. Cafmsysteme Zur Weitergabe Der Benötigten Daten An Die Ag Ein. Das Cafm-system Des An Muss Sowohl Software- Als Auch Hardwareseitig Den Itsicherheitsanforderungen Des Bsi Entsprechen. -- Dem An Stehen Räumlichkeiten Sowie Wärme, Wasser Und Elektroenergie Für Seine Vertragserfüllung Unentgeltlich Zur Verfügung. Der An Stellt Alle Erforderlichen Werkzeuge, Geräte Und Materialien Für Seine Leistungserbringung. -- Das Eingesetzte Personal Des An Einschl. Genehmigter Unterauftragnehmer Muss Grundsätzlich Im Besitz Einer Einfachen Sicherheitsüberprüfung Sü1 Nach § 8 Süg Sein. --- Für Die Ausführung Der Leistungen Werden U.a. 1 Objektleiter Und 7 Haustechniker Sowie Deren Vertreter Benötigt. Es Ist Eine Präsenzzeit Des Ol Von 07:00 Bis 15:30 Uhr Arbeitstäglich Zu Gewährleisten. Die Vertragsgegenständlichen Leistungen Der Ht Sind Arbeitstäglich Im Präsenzzeitraum Von 07:00 Bis 19:00 Uhr (b.-mitte, 2-schicht-system) Und Von 06:00 Bis 14:30 Uhr (b.-spandau) Zu Erbringen. --- Genaue Angaben Sind Dem Vertrag Und Seinen Anlagen Zu Entnehmen.

Details: Description Notice Of Negotiated Procurement (negotiated Procurement Due To Two-failed Biddings) Dswd Nnp No. 25-tfb-001 “hiring Of Consulting Services For Developing The Electronic Management Of Programs, Services And Opportunities For The Welfare And Rights Of Persons With Disabilities (empower Pwds) Application” (pr Nos. 2024101590) 1. The Department Of Social Welfare And Development (dswd), Through The Information And Communications Technology Management Service (ictms) Funds For Cy 2024 Intends To Apply The Sum Of Three Million Nine Hundred Forty-one Thousand Eight Hundred Eighty-nine Pesos And Sixty Centavos (php3,941,889.60) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “hiring Of Consulting Services For Developing The Electronic Management Of Programs, Services And Opportunities For The Welfare And Rights Of Persons With Disabilities (empower Pwds) Application” Under Dswd Nnp No. 25-tfb-001. 2. The Dswd Now Invites Legally, Technically And Financially Capable Consulting Firms For The Software Development Cycle To Establish The Empower Pwd Website, Web And Mobile Application, Which Aims To: A. Analyze The Business Requirements Of The Program; B. Design And Develop The Empower Pwd App, Including A Public-facing Website Based On The Specified Business Requirements; C. Perform The Necessary Quality Assurance Tests For The Empower Pwd Application, Including The Privacy Impact Assessment; D. Assist In The Deployment Of The Empower Pwd Application, Including The Conduct Of Training Of Trainers; And E. Provide A Warranty Service Upon Post-deployment Of The Empower Pwd Application. Interested Consultant/s Are Requested To Submit The Eligibility Documents, Technical, And Financial Proposals As Specified In The Herein Attached Checklist Of Eligibility, Technical, And Financial Documents. 3. The Procurement Procedure That Will Be Adopted Is Negotiated Procurement Considering That There Has Been Two Failure Of Biddings Pursuant To Section 53.1 Of The Implementing Rules And Regulations (irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The Government Procurement Reform Act (gpra). The Procurement Is Restricted To Filipino Citizens/sole Proprietorships, Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To R.a. 5183 And Subject To Commonwealth Act 138. The Bids And Awards Committee (bac) Will Engage In Negotiation A Sufficient Number Of Consulting Firm/s To Ensure Effective Competition. If Only One (1) Consultant Respond To The Notice/invitation Or Posting, The Bac Shall Proceed With The Negotiation Subject To The Rules Prescribed In The 2016 Revised Irr Of Ra 9184. The Selection Of The Successful Offers Shall Be Based On The Best And Final Offer That Will Be Submitted On A Specified Date, Which Could Meet The Dswd’s Minimum Technical And Financial Requirements And Does Not Exceed The Abc. 4. Interested Consultant/s May Obtain Further Information From The Bac Secretariat At The Address Given Below From Monday To Friday At 8:00 Am To 5:00 Pm. 5. The Deadline For The Submission Of Proposals (technical And Financial Documents) Is On 21 January 2025 At 09:00 A.m. Which Shall Be Delivered At The Bac Secretariat Office, 2nd Floor, Mahusay Building, Dswd Central Office, Ibp Road, Constitution Hills, Quezon City. Late Proposals Shall Not Be Accepted. 6. The Opening Of Quotations/proposals And Negotiation Will Be Scheduled Within The Day Of The Deadline For The Submission Of Quotation/proposal, To Be Held At The Bac Conference Room, 2nd Floor Mahusay Building, Dswd Central Office, Ibp Road, Constitution Hills, Quezon City. 7. The Procuring Entity Shall Evaluate Proposals Using The Quality-cost Based Evaluation (qcbe), At 85% (technical Proposal) And 15% (financial Proposal) Ratio. The Criteria And Rating System For The Evaluation Of Quotations/proposals Shall Be Provided In The Terms Of Reference. 8. The Contract Shall Be Completed Within Four (4) Months From Receipt Of The Notice To Proceed. 9. The Dswd Reserves The Right To Accept Or Reject Any Proposal And To Annul The Procurement Process At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Suppliers. 10. For Further Information, Please Refer To: The Chairperson Dswd Bids And Awards Committee C/o Bac Secretariat Ground Floor, Dswd Central Office Ibp Road, Constitution Hills, Quezon City Fax No. (02) 951-7116 Telephone Nos. (02) 931-8101 To 07 Local 123 (original Signed) U/sec. Monina Josefina H. Romualdez Undersecretary And Chairperson Bids And Awards Committee

Details: Nsn 7r-5821-015855355-p8, Tdp Ver 001, Qty 7 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement.

Details: This Is A Modification 6 To The Synopsis Entitled Extravehicular Activity And Human Surface Mobility Technologies, Reference No. 80jsc022ehp Which Was Posted On September 23, 2022. You Are Notified That The Following Changes Are Made: purpose: extended The Response Date From 1/16/2025 To 1/16/2027. the Due Date For Responses Is Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments. ***end Of Modification 6*** this Is A Modification 5 To The Synopsis Entitled Extravehicular Activity And Human Surface Mobility Technologies, Reference No. 80jsc022ehp Which Was Posted On September 23, 2022. You Are Notified That The Following Changes Are Made: purpose: this Is A Modification 5 To Update The Point Of Contact (poc) From: contact Information: technology Development And Partnerships Manager, eva & Human Surface Mobility Program email: Michael.a.berdich@nasa.gov to: contact Information: technology Development And Partnerships Manager, eva & Human Surface Mobility Program email: Stephanie.a.sipila@nasa.gov the Due Date For Responses Is Not Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments. ***end Of Modification 5*** this Is A Modification 4 To The Synopsis Entitled Extravehicular Activity And Human Surface Mobility Technologies, Reference No. 80jsc022ehp Which Was Posted On September 23, 2022. You Are Notified That The Following Changes Are Made: correct The Modification 3 revise The Entry Titled “modification 2” To Reflect It As “modification 1.” Additionally, Incorporate Relevant Links In Bold Into This Entry. the Following Link Https://nasajsc.secure.force.com/statementofinterest Is No Longer Valid Please Refer To The Link Below Titled: The Statement Of Interest In The Attachments/links Section. purpose: the Nasa Extravehicular Activity (eva) And Human Surface Mobility (hsm) Program (ehp) Seeks To Work With Partners To Advance The Technologies Associated With Human Surface Mobility In Support Of Nasa’s Artemis Missions. The Ehp Vision Is To Provide Safe, Reliable, And Effective Eva And Hsm Capabilities That Allow Astronauts To Survive And Work Outside The Confines Of A Spacecraft On And Around The Moon. Artemis Missions Will Return Humans To The Surface Of The Moon Using Innovative Technologies To Explore More Of The Lunar Surface Than Ever Before. We Will Collaborate With Commercial And International Partners And Establish The First Long-term Presence On The Moon. Then, We Will Use What We Learn On And Around The Moon To Take The Next Giant Leap: Sending The First Astronauts To Mars. ehp Flight Projects Are Exploration Eva Suits (xeva Suits) And Tools, Lunar Terrain Vehicle (ltv), And Pressurized Rover (pr). For More Information, Reference The Ehp Website Here: Extravehicular Activity And Human Surface Mobility - Nasa (https://www.nasa.gov/extravehicular-activity-and-human-surface-mobility/). the Ehp And Partners Will Collaborate On Developing Lunar Surface Capabilities To Reduce Risk And Increase Productivity Of Ehp Flight Projects During Artemis Missions. Focus Will Be On Technologies That Mitigate Risk For Lunar Surface Systems That Will Provide Mission Planners With More Choices, Thereby Increasing Mission Success. In Pursuing These Types Of Capabilities, Nasa And Potential Partners Will Develop New And Improved Technologies That Will Provide Additional Options For Terrestrial Applications In Multiple Industries. additional Information: ehp May Periodically Publish In Appendices To This Announcement Identifying Specific Technologies Under Current Development To Further Inform Potential Collaboration Opportunities. An Example Of One Such Technology Being Developed Is Described In Appendix A - Lunar Dust Level Sensor And Effects On Surfaces (ldes). For Access To This Export-controlled Document, Please Email The Points Of Contact Below. ehp Periodically Places Informational Reference Documents That Relate To Lunar Human Surface Mobility Accessible By Industry In The Ehp Technical Library (https://eva.jsc.nasa.gov/). Access To The Technical Library Requires Login.gov Access. Follow The Prompts To Gain Access. Once Access Has Been Granted, The Informational Documents Related To This Announcement Is In The ‘ehp Technology Integration’ Folder, In Which You Will Find Information On The Following (major Updates To The Technical Library Content Will Also Be Updated Here): - Ldes – Initial Ground Test Results Regarding The Magnitude Of Thermal Impact That Lunar Dust Has On Surfaces. - 84s Lunar Terrain Model – A Terrain Model Of The Lunar South Pole (below The 84 South Latitude) Which Can Be Used As An Early Reference Data Set To Enable Initial Studies Of The Lunar Terrain. additionally, Nasa Has Made Available To The Public The Digital Lunar Exploration Sites Unreal Simulation Tool (dust) Which Is An Early 3d Visualization Application Of The Lunar South Pole. Its Intended Use Is For Early Inspection, Mission Planning, And Analysis Of Lunar Landing And Traverse Sites For Hls And Artemis Base Camp. This Application And The Supporting Toolkit Built From Dust Are Used To Provide Distributable Lunar Environments And Tools To Support Rendering And Exporting Terrain, Multi-display Facilities, And Connections To Trick-based Simulations. It Can Be Attained At The Following Link: Digital Lunar Exploration Sites Unreal Simulation Tool (dust) Products(msc-27522-1) | Nasa Software Catalog (https://software.nasa.gov/software/msc-27522-1). technology: ehp Technology Goals Include, But Are Not Limited To, Overcoming Environmental And Long Mission Duration Challenges. Lunar Environmental Challenges Include Operating In Dust (lunar Regolith), Radiation, And Extreme Temperatures. Martian Environmental Challenges Are Operating In Martian Carbon Dioxide-rich Atmosphere And 1/3g, Driving The Need For Low Size, Weight, And Power. Long Mission Durations Drive Sustainability And Maintainability Challenges. Some Technology Areas Of Interest Include, But Are Not Limited To: Dust Mitigation Capabilities, Eva Systems, Local Relative Navigation, Increased Battery Capacity And Reduced Charge Time, And Advanced Mobility Concepts Capable Of Sustained Operation While Minimizing Maintenance In A Lunar Environment For An Extended Service Period. Each System Will Be Required To Operate In The Extreme Environment Of Cis-lunar Orbit And/or The Lunar South Pole, Including Inside Permanently Shadowed Regions (psrs) And Onto Mars. intellectual Property (ip): this Potential Partnership May Produce New Ip That Could Be Jointly Owned By Nasa And The Partner Or May Become The Property Of The Partner. Standard Clauses For Partnership Agreements Are Provided In The Appendices Of The Space Act Agreements Guide, Naii 1050-1. These Standard Clauses Are Usually Used Without Any Changes. Any Deviations From The Standard Intellectual Property Clauses Are Reviewed By Nasa Office Of The General Counsel At The Headquarters And/or Center-level, As Appropriate And Approved By Nasa Partnerships Office. potential Commercial Applications: lunar, Undersea, Automotive, Nuclear, Space Tourism, Personal Protective Equipment (ppe) … keywords: mobility, Spacesuit, Rover, Vehicle, Power Infrastructure, Sustainable, Dust, Communication Architecture, Relative Navigation And Localization, Regolith, Lunar Terrain Vehicle, Ltv, Pressurized Rover, Pr, Lunar, Artemis, Moon, Iss, Leo contact Information: technology Development And Partnerships Manager, eva & Human Surface Mobility Program email: Michael.a.berdich@nasa.gov partnership Manager, jsc’s Partnership Development Office email: Jsc-partnerships@mail.nasa.gov to Respond To This Announcement, Please Use The Statement Of Interest Form Found At statement Of Interest (https://docs.google.com/forms/d/e/1faipqlsclwzeqitigc1wauvfvegkykseuozom0uofxtc60gk_giretq/viewform?usp=sharing) to View All Co-development And Partnering Opportunities With The Nasa Johnson Space Center, Please Visit Our Website At (https://www.nasa.gov/johnson/exploration/technology/co-development-and-partnering-opportunities) the Due Date For Responses Is Not Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments. ***end Of Modification 4*** this Is A Modification 3 To The Synopsis Entitled Extravehicular Activity And Human Surface Mobility Technologies, Reference No. 80jsc022ehp Which Was Posted On September 23, 2022. You Are Notified That The Following Changes Are Made: update Modifcation 2 In Its Entirety: purpose: the Nasa Extravehicular Activity (eva) And Human Surface Mobility (hsm) Program (ehp) Seeks To Work With Partners To Advance The Technologies Associated With Human Surface Mobility In Support Of Nasa’s Artemis Missions. The Ehp Vision Is To Provide Safe, Reliable, And Effective Eva And Hsm Capabilities That Allow Astronauts To Survive And Work Outside The Confines Of A Spacecraft On And Around The Moon. Artemis Missions Will Return Humans To The Surface Of The Moon Using Innovative Technologies To Explore More Of The Lunar Surface Than Ever Before. We Will Collaborate With Commercial And International Partners And Establish The First Long-term Presence On The Moon. Then, We Will Use What We Learn On And Around The Moon To Take The Next Giant Leap: Sending The First Astronauts To Mars. ehp Flight Projects Are Exploration Eva Suits (xeva Suits) And Tools, Lunar Terrain Vehicle (ltv), And Pressurized Rover (pr). For More Information, Reference The Ehp Website Here: Extravehicular Activity And Human Surface Mobility - Nasa the Ehp And Partners Will Collaborate On Developing Lunar Surface Capabilities To Reduce Risk And Increase Productivity Of Ehp Flight Projects During Artemis Missions. Focus Will Be On Technologies That Mitigate Risk For Lunar Surface Systems That Will Provide Mission Planners With More Choices, Thereby Increasing Mission Success. In Pursuing These Types Of Capabilities, Nasa And Potential Partners Will Develop New And Improved Technologies That Will Provide Additional Options For Terrestrial Applications In Multiple Industries. additional Information: ehp May Periodically Publish In Appendices To This Announcement Identifying Specific Technologies Under Current Development To Further Inform Potential Collaboration Opportunities. An Example Of One Such Technology Being Developed Is Described In Appendix A - Lunar Dust Level Sensor And Effects On Surfaces (ldes). For Access To This Export Controlled Document, Please Email The Points Of Contact Below. ehp Periodically Places Informational Reference Documents That Relate To Lunar Human Surface Mobility Accessible By Industry In The Ehp Technical Library. Access To The Technical Library Requires Login.gov Access. Follow The Prompts To Gain Access. Once Access Has Been Granted, The Informational Documents Related To This Announcement Is In The ‘ehp Technology Integration’ Folder, In Which You Will Find Information On The Following (major Updates To The Technical Library Content Will Also Be Updated Here): ldes – Initial Ground Test Results Regarding The Magnitude Of Thermal Impact That Lunar Dust Has On Surfaces. 84s Lunar Terrain Model – A Terrain Model Of The Lunar South Pole (below The 84 South Latitude) Which Can Be Used As An Early Reference Data Set To Enable Initial Studies Of The Lunar Terrain. additionally, Nasa Has Made Available To The Public The Digital Lunar Exploration Sites Unreal Simulation Tool (dust) Which Is An Early 3d Visualization Application Of The Lunar South Pole. Its Intended Use Is For Early Inspection, Mission Planning, And Analysis Of Lunar Landing And Traverse Sites For Hls And Artemis Base Camp. This Application And The Supporting Toolkit Built From Dust Are Used To Provide Distributable Lunar Environments And Tools To Support Rendering And Exporting Terrain, Multi-display Facilities, And Connections To Trick-based Simulations. It Can Be Attained At The Following Link: Digital Lunar Exploration Sites Unreal Simulation Tool (dust) Products(msc-27522-1) | Nasa Software Catalog. technology: ehp Technology Goals Include, But Are Not Limited To, Overcoming Environmental And Long Mission Duration Challenges. Lunar Environmental Challenges Include Operating In Dust (lunar Regolith), Radiation, And Extreme Temperatures. Martian Environmental Challenges Are Operating In Martian Carbon Dioxide-rich Atmosphere And 1/3g, Driving The Need For Low Size, Weight, And Power. Long Mission Durations Drive Sustainability And Maintainability Challenges. Some Technology Areas Of Interest Include, But Are Not Limited To: Dust Mitigation Capabilities, Eva Systems, Local Relative Navigation, Increased Battery Capacity And Reduced Charge Time, And Advanced Mobility Concepts Capable Of Sustained Operation While Minimizing Maintenance In A Lunar Environment For An Extended Service Period. Each System Will Be Required To Operate In The Extreme Environment Of Cis-lunar Orbit And/or The Lunar South Pole, Including Inside Permanently Shadowed Regions (psrs) And Onto Mars. intellectual Property (ip): this Potential Partnership May Produce New Ip That Could Be Jointly Owned By Nasa And The Partner Or May Become The Property Of The Partner. Standard Clauses For Partnership Agreements Are Provided In The Appendices Of The Space Act Agreements Guide, Naii 1050-1. These Standard Clauses Are Usually Used Without Any Changes. Any Deviations From The Standard Intellectual Property Clauses Are Reviewed By Nasa Office Of The General Counsel At The Headquarters And/or Center-level, As Appropriate And Approved By Nasa Partnerships Office. potential Commercial Applications: lunar, Undersea, Automotive, Nuclear, Space Tourism, Personal Protective Equipment (ppe) … keywords: mobility, Spacesuit, Rover, Vehicle, Power Infrastructure, Sustainable, Dust, Communication Architecture, Relative Navigation And Localization, Regolith, Lunar Terrain Vehicle, Ltv, Pressurized Rover, Pr, Lunar, Artemis, Moon, Iss, Leo contact Information: technology Development And Partnerships Manager, eva & Human Surface Mobility Program email: Michael.a.berdich@nasa.gov partnership Manager, jsc’s Partnership Development Office email: Jsc-partnerships@mail.nasa.gov to Respond To This Announcement, Please Use The Statement Of Interest Form Found At statementofinterest to View All Co-development And Partnering Opportunities With The Nasa Johnson Space Center, Please Visit Our Website At https://www.nasa.gov/johnson/exploration/technology/co-development-and-partnering-opportunities extended The Response Date From 9/26/2024 To 1/16/2025 the Due Date For Responses Is Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments. ***** End Of Modification 3**** this Is A Modification 2 To The Synopsis Entitled Extravehicular Activity And Human Surface Mobility Technologies, Reference No. 80jsc022ehp Which Was Posted On September 23, 2022. You Are Notified That The Following Changes Are Made: extended The Response Date From 9/26/2023 To 9/26/2024 the Due Date For Responses Is Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments. *****end Of Modiffication 2 ****** this Is A Modification 1 To The Synopsis Entitled Extravehicular Activity And Human Surface Mobility Technologies, Reference No. 80jsc022ehp Which Was Posted On September 23, 2022. You Are Notified That The Following Changes Are Made: new Attachment: Appendix A – Lunar Dust Level Sensor And Effects On Surfaces new Purpose Statement Added In Bold. the Due Date For Responses Is Not Extended. offerors Are Responsible For Monitoring This Site For The Release Of Any New Special Notice. purpose: the Nasa Extravehicular Activity (eva) And Human Surface Mobility (hsm) Program (ehp) Seeks To Work With Partners To Advance The Technologies Associated With Human Mobility And Lunar Surface Infrastructure In Support Of Nasa’s Artemis Missions. The Ehp Vision Is To Provide Safe, Reliable, And Effective Eva And Hsm Capabilities That Allow Astronauts To Survive And Work Outside The Confines Of A Spacecraft On And Around The Moon. Artemis Missions Will Return Humans To The Surface Of The Moon Using Innovative Technologies To Explore More Of The Lunar Surface Than Ever Before. We Will Collaborate With Commercial And International Partners And Establish The First Long-term Presence On The Moon. Then, We Will Use What We Learn On And Around The Moon To Take The Next Giant Leap: Sending The First Astronauts To Mars. the Ehp And Partners Will Collaborate On Developing Lunar Capabilities To Increase Productivity Of Relevant Systems Allowing Crew To Accomplish More During Artemis Missions. Focus Will Be On High-risk Technologies For Lunar Surface Systems That Will Provide Mission Planners With More Choices, Thereby Increasing Mission Success. In Pursuing These Types Of Capabilities, Nasa And Potential Partners Will Develop New And Improved Technologies That Will Provide Additional Options For Terrestrial Applications In Multiple Industries. ehp May Periodically Publish In Appendices To This Announcement Identifying Specific Technologies Under Current Development To Further Inform Potential Collaboration Opportunities. An Example Of One Such Technology Being Developed Is Described In Appendix A - Lunar Dust Level Sensor And Effects On Surfaces (ldes).for Access To This Export Controlled Document, Please Email The Points Of Contact Below. technology: technology Goals Include, But Are Not Limited To: Dust Mitigation Capabilities, Eva Systems, Lunar Power And Communication Infrastructure, Local Relative Navigation, Increased Battery Capacity And Reduced Charge Time, And Advanced Mobility Concepts Capable Of Sustained Operation While Minimizing Maintenance In A Lunar Environment For An Extended Service Period. Each System Will Be Required To Operate In The Extreme Environment Of Cis-lunar Orbit And/or The Lunar South Pole, Including Inside Permanently Shadowed Regions (psrs) And Onto Mars. intellectual Property (ip): this Potential Partnership May Produce New Ip That Could Be Jointly Owned By Nasa And The Partner Or May Become The Property Of The Partner. Standard Clauses For Partnership Agreements Are Provided In The Appendices Of The Space Act Agreements Guide, Naii 1050-1. These Standard Clauses Are Usually Used Without Any Changes. Any Deviations From The Standard Intellectual Property Clauses Are Reviewed By Nasa Office Of The General Counsel At The Headquarters And/or Center-level, As Appropriate And Approved By Nasa Partnerships Office. potential Commercial Applications: lunar, Undersea, Automotive, Nuclear, Space Tourism, Personal Protective Equipment (ppe) … keywords: mobility, Spacesuit, Rover, Vehicle, Power Infrastructure, Sustainable, Dust, Communication Architecture, Relative Navigation And Localization, Regolith, Lunar Terrain Vehicle, Ltv, Pressurized Rover, Pr, Lunar, Artemis, Moon, Iss, Leo to Respond To This Announcement, Please Use The Statement Of Interest Form Found At The Link Below. to View All Co-development And Partnering Opportunities With The Nasa Johnson Space Center, Please Visit Our Website At https://www.nasa.gov/johnson/exploration/technology/co-development-and-partnering-opportunities

Details: On-site and remote preventive and corrective maintenance of pneumatic transport networks of the Aerocom and Elektror brands and updating of associated software