Shoes Tenders

Details: Description Republic Of The Philippines Province Of Quezon City Government Of Tayabas Invitation To Bid For Project #24-200 Supply And Delivery Of Other Mooe Purchase And Distribution Of Sports Uniform – Csdo 1. The City Government Of Tayabas, Through The Sef Supplemental 2024intends To Apply The Sum Two Million Three Hundred Forty-seven Thousand Eight Hundred Pesos (php 2,347,800.00) Being The Abc To Payments Under The Contract For Project # 24-200 Supply And Delivery Of Other Mooe Purchase And Distribution Of Sports Uniform - Csdo. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Tayabasnow Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Within Ten (10) Calendar Days Upon The Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From City Government Of Tayabas And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. – 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024 (thursday), 8:00 A.m. – 5:00 P.m. From The Given Address And Website(s) Below, In The Amount Of Five Thousand Pesos (p 5,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees 6. The City Government Of Tayabaswill Hold A Pre-bid Conference On November 28, 2024 (thursday) 10:00 Am At Bids And Awards Committee Office, 2nd Floor New City Hall, Brgy. Baguio, Tayabas City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 10, 2024 (tuesday), 10:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 10, 2024 (tuesday), 10:01 A.m. At The Given Address Below .bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Procuring Entity Is The City Government Of Tayabas With Email Address Of Bidsandawards@gmail.com For The Use Of A Back-up Data Or Cloud Storage For Large Files Uploaded For Online Bid Submission 11. The City Government Of Tayabasreserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jayvee Mark E. Ford Head, Bac Secretariat 2nd Floor New City Hall, Brgy. Baguio, Tayabas City (042)-797-3778 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph/gepsnonpilot/tender/splashopportunitiessearchui.aspx?menuindex=3&clickfrom=openopp&result=3 Item No. Unit Description Qty 1. Pcs High Quality Trucker Cap Embroidered Logo (size: Adjustable) Materials: Front: Foam Mesh, Bill: Foam Mesh, Back And Side Panel: Polyester Mesh 350 2. Pcs Parade Jacket With Logo (material: Polyester Sizes: Small, Medium, Large And Extra Large) 350 3. Pcs Parade Jogging Pants With Logo (material: Polyester Sizes: Small, Medium, Large And Extra Large) 350 4. Pcs T-shirt With Collar (material: Polyester Sizes: Small, Medium, Large And Extra Large) Sublimation With Logo 350 5. Pcs Parade Playing Shoes Color: White (all Sizes) 350 6. Pcs High Quality Duffle Sports Bag Specifications: With Logo In The Bag And Handle, Material: Polyester Sizes: 60cm*25cm*19c 350 7. Pcs Playing Shorts Material: Polyester (sizes: Small, Medium, Large And Extra Large) Sublimation With Logo 350 8. Pcs Playing T-shirt Material: Polyester (sizes: Small, Medium, Large And Extra Large) Sublimation With Logo 350 9. Pcs Playing Sando Material: Polyester (sizes: Small, Medium, Large And Extra Large) Sublimation With Logo 350 10. Pcs Golf Umbrella, Single Canopy, Fiber Ribs Materials: Pongee 350 ***nothing Follows*** November 21, 2024 ______________________________________ Wilfredo S. Tomines Chairperson, Bids And Awards Committee

Details: Description Itb No.104.24- 1 Unit Stress Ergometer Item Specifications 1. Description Of Function This Recumbent Bicycle Ergometer Test Machine Is Meant To Allow Stress Testing For Patient Population That Are Unable To Walk On A Regular Treadmill Or Do Safety, And Is Meant To Supplement Our Existing Cpet And Tet. 2. Operational Requirements System Complete With All Accessories As Specified In The Technical Specifications Below. 3. Technical Specifications 3.1 Bicycle Ergometer Test System 3.1.1 Compatible With Our Existing Treadmill Exercise Test System / Workstation 3.1.2 Recumbent Bicycle With User Weight Capacity Of At Least 300kg 3.1.2.1 Torque Range Of 1 To 70nm 3.1.2.2 Minimum Startup Load Of 5 To 10w 3.1.2.3 Maximum Peak Load Of 1000w 3.1.2.4 Minimum Load Increments Of 1w 3.1.2.5 Maximum Continuous Load 750w 3.1.2.6 Maximum Rpm Independent Constant Load Of 150 Rpm 3.1.2.7 Minimum Rpm Independent Constant Load Of 30 Rpm 3.1.2.8 Electromagnetic Braking System 3.1.2.9 Dynamic Calibration 3.1.2.10 Comfortable Seating With Seat Width Of At Least 20 Inches And With Cushioning Made Of Gel Or Foam 3.1.2.11 Minimum Leg Length Of User (incl. Adjustable Pedals) At Least 25 Inches 3.1.2.12 Adjustability Seat - Range Of At Least 15 Inches 3.1.2.13 Adjustable Cranks 3.1.2.14 Pedal Shoes For Foot Stability During Cycling (size Suitable For Most Adults According To Manufacturer's Specification (with 2 Sets Of Replacements) 3.1.3 Stand-alone Mode 3.1.4 With Remote Control 3.2 Programmable Control Unit 3.2.1 Screen Resolution Of At Least 320 X 240 (or Vice Versa), Touchscreen Monitor User Interface Of At Least 7” 3.2.1.1 Readout For Rate Per Minute (rpm) 3.2.1.2 Readout For Heart Rate (hr) 3.2.1.3 Readout For Time 3.2.1.4 Readout For Power 3.2.1.5 Readout For Distance 3.2.1.6 English User Interface 3.3 Attachments To Measure Spo2 And Heart Rate During Stand-alone Mode (plus At Least 2 Replacement Finger Probe) 3.4 All The Necessary Cabling And Wiring To Connect Ergometer With Existing Treadmill Exercise System 4. Environmental Factors 4.1 Power Supply 4.1.1 Power Equipment – Autovolt Or 100 To 240 Volts, 60hz, Fitted With Phc Outlet, 3-prong 4.1.2 Resettable Over-current Breaker To Be Fitted For Protection 4.1.3 Uninterruptable Power Supply With At Least 30 Minute Power Battery 5. Standards, Safety And Training 5.1 Manufactures/supplier Should Have Iso 13485 Certificate To Quality Standard. 5.2 Should Be A Philippine Fda Approved Product 5.3 Ce, Ul Or Bis Approved Product 5.4 Comprehensive Technical Training For Phc Biomed And User's Training To Staff For Familiarity With The System. 5.5 Electrical Conforms To Standards For Electrical Safety Iec 60601-1 General Requirements (or Equivalent International/national Standard) 5.6 Warranty /parts And Services 5.6.1 Comprehensive Three (3) Years Warranty On Equipment 5.6.2 Certify Availability Of Services And Spare Parts In The Market For Ten (10) Years After Warranty 5.6.3 Three (3) Years Services And Spare Parts Warranty Inclusive Of Quarterly Preventive Maintenance 5.6.4 Annual Calibration, Certificate During The Warranty Period 5.6.5 Vendor Shall Provide, At No Additional Cost To Philippine Heart Center, A Loaner Unit Of The Same Model While The Current Unit Is Under Repair Until Said Equipment Is Repaired To The Satisfaction Of The End-user Within 24 Hours 6. Documentation 6.1 User/technical/maintenance Manuals To Be Supplied In English And Must Provide Hard And Soft Copy Upon Delivery. 6.2 Laminated Troubleshooting Guide 6.3 Certificate Of Calibration And Inspection 6.4 List Of Important Spare Parts And Accessories With Their Part Number And Costing 6.5 Logbook With Instructions For Maintenance Checklist (daily, Weekly, Monthly & Quarterly). Job Description Of Hospital Technician And Company Service Engineer Should Be Clearly Stated. 6.6 List Of Equipment Available For Providing Calibration And Routine Maintenance Support As Per Manufacturer Documentation In Service/ Technical Manual 6.7 Distributorship – Exclusive Or Authorized 6.8 Delivery Period – 60 Calendar Days 6.9 Slcc – Any Cardiac Diagnostic Equipment For Last 3 Years

Details: Description 1 Lot Supply And Deliveryof The Following Spareparts Consisting Of … 2assy Headlight With Bulb 2assy Foglight With Bulb 1set Brake Shoe 2pcs Wheel Cylinder (rear) 1pc Clutch Lining 1pc Pressure Plate 1pc Pilot Bearing 1pc Release Bearing 1set Balljoint (lower & Upper) 1set Tie Rod End (l & R) 3pcs Cross Joint A/s 1set Diferrential Oil Seal 1set Differential Bearing 2sets Window Motor (l&r) 1pc Clutch Master (primary) 1pc Clutch Master (secondary) 3pcs Fan Belt 1pc Center Bearing 8pcs Spring Bushing 4pcs Shock Absorber (l&r) (f&r) 2pcs Rear Wheel Bearing 2pcs Outer Bearing (front) 2pcs Inner Bearing (front) 1set Winshield Tint 1set Window Tint 1pc Air Filter A/s 1pc Hydrovac Assy. 2pcs Fuel Filter (primary & Secondary) 1pc Wiper Washer Motor 1job Radiator Overhaul 1pc Door Knob (tailgate Outer) 1pc Receiver Drier 1pc Expansion Valve 1pc Underboost 1pc Throttle Body 1pc Mass Air Flow (maf) Sensor 1pc Cooling/evaporator 1pc Condenser 1pc Thermostat 1job Labor (general Service And Pull Down Evaporator, Vacuum/ Compressor Oil, Charging Of Freon)

Details: Description To Wit: 1 Lot Maintenance And Mechanical Repair/services Of Garbage Truck With The Following Scope To Undertake: replace Brake Master Assymbly open Brake System Rft & Rr L/r Portion: replace Engine Support L/r & Transmission Support repack Wheel Hub Bearing Inner & Outer Frt & Rr L/r bonding Brake Shoe Lining Frt And Rr L/r Transmiss gear Box Overhaul Leaking A.t.f refunctional Electrical System: Panel, Brake Lights, Back Up Clearance Lamp, Siding L/r Labor & Materials replace Valve Cover Cover Oil Leaks fixed Exhaust Pipe Rattle check Up Differential & Transmission Gear Oil Level pulled Out The Radiator For Overhaul refunction Power Window Switch L/r replace Drum Bolt Rr Lh replace Tie Rod End L/r Brake Master Assymbly, Rubber Caps 1 1/8, Rubber Caps 1 1/16, Engine Support, Transmission Support, Grease #3, Gear Box Kit, Back Up Switch, Temperature Sender, Clearance Lamp 24v, Bosch Relay 24 V, Auto Wire #14, Push & Pull Switch, Brake Switch, Auto Bulb Double, A.t.f Fluid, Wedge Bulb 24v, Electrical Tape, Valve Cover Assy, Valve Cover Gasket, Gear Oil #140, Brake Fluid, Apron Switch, Rr Drum Bolt Lh, Wiper Blade #19, Tie Rod End . Note: - The Procuring Entity Requires The Prospective Bidders To Specify The Brand They Will Offer. - For Representatives, Special Power Of Attorney (spa) Is Required To Perform Official Transactions With The Procuring Entity.

Details: Description P7 J375 & S5s621 Ambulance 1 Pc Pressure Plate 1 Pc Clutch Disc 2 Set Brake Shoe 2 Set Brakepad 2 Set Wiperblade Rescue Truck 2 Pcs 2d Battery Pick-up P7j873 1 Set Brakepad Motorcycle Red Jaica 2 Liters Magnetic Oil/engine Oil Gasoline Ambulance Sab3706 1 Pc Radiator Hose Lower 4 Pcs Hoseclamp 4 Pcs Rim 6 Stud R15 2 Pcs Battery 3sm Dumptruck Nfx7242 3 Pcs Wiperblade L300 B8b620 6 Pcs Window Glass Lock 1 Set Wiperblade 5 Pcs Pitch Tubeless She 518 Dumptruck & Dropside 2 Pcs Crossiont 1 Pc Clutch Operating Assv 7/8 1 Pc Fanbelt 5450 B43 1 Pc Side Mirror 2 Set Horn 24v 20 Pcs Bolts And Nuts With Washer Watertruck 10 Pcs Hoseclamp 2 Pcs Battery 3sm 2 Set Tire 8025xr16 W/ Flap & Interior Ambulance For867 2 Pcs Shock Absorber 1 Pc Fuel Filter Primary 1 Pc Fuel Filter Secondary 1 Pc Wiperblade Shuttlebus Sjy921 2 Pcs Oilfilter 6 Pcs Studbolt 1 Pc Clutch Master Assy Sab4921 1 Pc Radiator Hose 2 Gal Coolant 2 Pcs Hoseclamp Genset Fishlanding 1 Pc 6sm Battery

Details: Description Project Reference Number Municipality Of Lemery Standard Form Number: Sf – Good – 60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Date: ________________ Quotation No. ________ ___________________________ ___________________________ ___________________________ Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than __________ In The Return Envelope Attached Herewith. Oscar C. Villegas Jr. Procurement Officer Note: 1. All Entries Must Be Typewritten 2. Delivery Period Within ____________ Calendar Days 3. Warranty Shall Be A Period Of Six (6) Months For Supplies & Material, One (1) Year For Equipment, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of _________ Calendar Days 5. G-eps Registration Certificate Shall Be Attached Upon Submission Of Quotation 6. Bidders Shall Submit Original Brochures Showing Certification Of The Product Being Offered. Item Item & Description Qty. Unit Unit Price Total Price 1 Rear Tire W/ Tube (400x18) Set 2 Front Tire W/ Tube (275x21) Set 3 Pinion, Sprocket, Roller Chain Set 4 Knuckle Bearing Pc 5 Brake Shoe Pc 6 Brake Pad Pc 7 Battery Pc Total Brand And Model : ______________ Delivery Period : ______________ Warranty : ______________ Price Validity : ______________ After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. ___________________________ Printed Name / Signature ____________________________ Tel. No. / Cellphone No. E– Mail Address ____________________________ Date

Description: CATEGORY: LV7 TATA 6220 004428 LAMP UNIT VEHICULAR , LV7 TMB 2754 4660 0103 VANE PUMP , LV7 TATA 2154 3010 0105 PULL CABLE ACCELERATOR , LV7 TATA 2154 3010 0107 ASSY PULL CABLE ACCEL , LV7 TATA 2641 7250 2301 DOOR GLASS LH , LV7 TMB 2752 2540 0105 COVER ASSY 1.75 INCH SPLINE DIA , LV7 TMB 2574 4215 0113 WHEEL CYL WITH CITRADELIP 44.45 MM DIA , LV7 TMB 2786 0999 9904 HEAD FUEL FILTER BOTTOM , LV7 TATA 2573 2910 0159 MAJOR REPAIR KIT FOR M CYL , LV7 TATA 270754440114 BLINKER LAMP RH 24V , LV7 TMB 2060 5890 0101 WHEEL SPANNER 27X30 A F , LV7 TMB 2547 2312 6328 POLY V BELT 1360 SVL A C FAN SAMSONS , LV7 TMB 6212 0520 046 LAMP 24V 21WD 24 1 T529201 , LV7 TATA 2573 2910 0160 MINOR REPAIR KIT FOR M CYL CONSISTING OF , LV7 TMB 2530 017910 ASSY MASTER CYLINDER 25.4 DIA , LV7 TMB 6210 000334 BLINKER GLASS LH , LV7 TMB 2699 2910 0177 MAJOR KIT CLUTCH MASTER CYL REPAIR , LV7 TMB 2573 4450 0107 FILTER ASSY , LV7 TMB 2632 5440 0131 ASSY BLINKER LAMP LH WITH BULB , LV7 TMB 2576 8240 0138 ASSY WIPER BLADE , LV7 TMB 6212 0400 156 BULB F15 WTS 29201 , LV7 TMB 3503 4010 500 L D SCREW DRIVER 0.4X2.5X50 , LV7 TMB 2547 0913 0135 ASSY SERVICE INDICATOR , 43 I 43 AKL B 6518576 PIPE WRENCH 350 MM , Tool Kit COIQ 17082A BLOCK JACK , LV7 LD CVD X 3922400 TYRE PRESSURE GUAGE , Tool Kit CVD 5110000448 HANDLE AXES PICK HEAD 2 KG , LV6 MT2 5120 99 803 0263 LEVER TYRE CAR OR TRUCK , LV7 MARUTI 09482M00551 SPARK PLUG CHAMPION RC 8 YC , LV7 TATA 350 233 009 ADJUSTABLE WRENCH , LV7 TMB 2573 4370 0152 AIR FILTER , LV6 MT14 2640 000048 VALVE CORE TR CI LONG SHORT , LV7 MARUTI 13650 52G00 SENSOR INLET AIR TEMPERATURE , LV7 TATA 2540 008745 REGULATOR VEHICLE WINDOW , LV7 STLN VF 2466100034 DRIVE SHAFT , LV7 STLN VF 14610743283 UC SEALING PLATE , LV6 MT2 8340 000015 SCRENE LATRINE COMPLETE , LV6 MT2 4910 000003 GAUGE TYRE PRESSURE MASTER TYPE 70KPA TO , LV7 STLN P 4329039 BRAKE SHOE ASSY FRONT REAR , LV7 TATA 2540 008746 REGULATOR VEHICLE WINDOW , LV7 STLN P 3700951 BRUSH SET , LV7 MARUTI 11141M86512 GASKET CYLINDER HEAD , LV7 STLN F0244610 FRONT HUB BEARING , LV7 STLN VF 2460230774 AR ROLLER RING , LV7 TATA 2154 891 0010 CAB LIFTING BAR , LV6 MT14 2610 000250 FLAP RUST SLIP ITTAC 20RR 1100X20 ON 800 , LV7 MARUTI 18590M81A10 SENSOR MAP , LV6 MT6 17841M60A00 HOSE RADIATOR INLET , LV7 MARUTI 15910M830A0 CABLE ASSY ACCELERATOR

Details: Description 605 Project Signboard Quantity : 5.76 Sq.m. Materials Pcs. Tarpaulin 1.00 Pcs. Ordinary Plywood 4' X 8' X 1/2" 2.00 Pcs. Cocolumber 2" X 3" X 12' 5.00 Kgs. Assorted Common Nail 1.00 Labor 1 Carpenter 0.50 Day 1 Laborer 0.50 Day Spl-1 Construction Safety And Health Quantity : 1.00 Lot Materials Pcs. Safety Helmet 15.00 Pcs. Hand Gloves 15.00 Pcs. Safety Shoes 15.00 Lot Miscellaneous Items 1.00 (medicine, Medicine Cabinet, Water, First-aid Kit) Pc Welding Mask Hat Type (safety Glasses With Shields) 1.00 Pc Welding Apron (leather With Sleeves) 1.00 Pc Welding Gloves 1.00 Pcs Longsleeve Shirt 10.00 Spl-2 #ref! Quantity : 108.00 Sq.m. Equipment 0 Jack Hammer 10.00 Hour Labor 0 Construction Foreman 4.00 Days 0 Laborer 4.00 Days 100 Clearing & Grubbing Quantity: 1,300.00 Sqm Equipments 1 Road Grader 6.00 Labor 1 Construction Foreman 2.00 8 Laborer 2.00 105 Subgrade Preparation Quantity : 2,600.00 Sq.m. Equipment 1 Road Grader 10.00 Hour 1 Road Roller 10.00 Hour Labor 1 Construction Foreman 3.00 Days 10 Laborer 3.00 Days 201 Aggregate Base Coarse Quantity : 488.00 Cu.m. Materials: Aggregate Base Coarse 561.00 Cu.m. Equipment: 1 Road Grader 16.00 Hour 1 Road Roller 16.00 Hour Labor: 1 Construction Foreman 4.00 Days 8 Laborer 4.00 Days 311 Portland Cement Concrete Pavement Quantity : 1,950.00 Sq.m Materials: Portland Cement 2,633.00 Bags Sand 147.000 Cum Gravel 293.00 Cum 16mmø Rsb X 6m 159.00 Pc(s) Form Lumber - 2"x4"x12' 55.00 Pc(s) Asstd. Cwn 10.00 Kg(s) G.i. Pail (big) 10.00 Pc(s) Hot Asphalt Sealant 15.00 Kg(s) Labor 1 Construction Foreman 23.00 Day 10 Skilled Worker 23.00 Day 16 Laborer 23.00 Day Concrete Pouring 0 Construction Foreman 22.00 Day 0 Skilled Worker - Mason 22.00 Day 0 Laborer 22.00 Day Concrete Cutting 0 Laborer 6.00 Day Concrete Curing 0 Laborer 15.00 Day Equipment 1 Concrete Saw 14" Blade Ø 14.00 Day 1 Water Tank 14.00 Day 2 One Bagger Mixer 23.00 Day Installation Of Side Railings 103 (1) Structure Excavation Quantity: 48.00 Cu.m Labor 1 Foreman 6.00 Days 6 Unskilled Worker 6.00 Days Equipment 1 Minor Tools (10% Labor Cost) 1.00 Lot 405 Structural Concrete Quantity: 17.80 Cu.m Materials: Cement 160.00 Bags Sand 11.00 Cu.m Gravel 3/4 18.00 Cu.m Rsb 10mm Dia 17.00 Pcs Welding Rod 8.00 Kg Phenolic 15.00 Pcs Assorted Cwn 4.00 Kg Labor 1 Foreman 6.00 Days 2 Skilled Worker 6.00 Days 4 Unskilled Worker 6.00 Days Equipment 1 One Bagger Mixer 40.00 Hours 1 Welding Machine 24.00 Hours 1 Minor Tools (10% Labor Cost) 1.00 Lot Spl-2 Steel Works Quantity: 1.00 L.s. Materials: B.i. Steel Tube 50mm X 75mm X 1.5mm Thk 180.00 Pcs B.i. Steel 25mmx25mmx 1.2mm - Metal Railings 383.00 Pcs B.i. Steel Tube 25mm X 50mm X 1.5mm Thk 80.00 Pcs Welding Rod 85.00 Kg Consumables 1.00 Lot Labor 1 Foreman 12.00 Days 4 Welder 12.00 Days 8 Unskilled Worker 12.00 Days Equipment 4 Welding Machine 88.00 Hours 2 Cut-off Machine 40.00 Hours 1032 Painting Works Quantity: 28.00 Sq.m Materials: Epoxy Primer 30.00 Gal Lacquer Paint Finish 12.00 Gal Paint Brush & Roller 1.00 Lot Labor 1 Foreman 6.00 Day 4 Skilled Worker 6.00 Day Spl-3 Landscaping Works Quantity: 1.00 Lot Materials: Landspacing 1.00 Lot Labor 1 Foreman 7.00 Day 4 Skilled Worker 7.00 Day 8 Unskilled Worker 7.00 Day Equipment 1 Minor Tools (10% Labor Cost) 1.00 Lot

Description: * Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** "hammer Drill Bosch Gbh220 Professional Or Similar Approved Required Specifications: Nominal Input Power: 720 W Impact Energy: 2,0 J Tool Holder: Sds Plus Impact Speed At Nominal Speed: 0-4800 Bpm Rated Speed: 0-1200 Min -1 Max. Drill-ø: 22 Mm Weight: 2,3kg Must Include: Depth Gauge Auxiliary Handle Carrying Case Sds-plus Drill Kit (3 Piece: 6/8/10mm) " For Any Information Please Contact Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "fold Up Ladder Heavy Duty Mulitfunction Ladder 3100 Mm Required Specifications: Duty Rating: Heavy-duty Load Capacity: 150kg Safe Working Load: 270kg Maximum Static Load Rating: 150kg Extended Length: 3100mm Reach Height: 3100mm Step/rung Material: Aluminium Number Of Steps: 12 Material: Aluminium Application: Commercial " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "ratchet And Socket Set Rs Pro 26-piece Metric 1/2 In Standard Socket Set With Ratchet, 6 Point Or Equavalent Required Specifications: Drive Size: 1/2 In Finish: Chrome Material: Chrome Vanadium Steel Required Components: 19 X 1/2in Sockets: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 23mm, 24mm, 27mm, 30mm, 32mm 1 X 1/2in Spark Plug Socket: 16mm 3 X 1/4in Extension Bar 75mm, 125mm <(>&<)> 250mm 1x 1/2in Ratchet Handle 1x 1/2in Sliding T-bar Head 1 X 1/2in Universal Joint Must Include A Carry Case " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "pipe Wrench Required Specifications: Jaw Capacity: 50mm Overall Length: 315 Mm Material: Forged Steel, Corrosion Treated " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "industrial Labelling Machine Brother Pt-e550wvp Or Similar Approved Required Specifications: Display: 16 Characters X 3 Lines Backlit Graphic Lcd Print Speed: 30mm/second Compatible Label Widths: 6 Mm, 9 Mm, 12 Mm, 18 Mm, 24mm Maximum Print Height: 18mm Max Lines Per Label: 7 Resolution: 180 Dpi Cutter: Auto Full <(>&<)> Half Keyboard Layout: Qwerty Printing Options: Vertical Printing, Rotated Text(once, Rotate <(>&<)> Repeat) Labelling Functions: General, Faceplate, Cable Wrap, Cable Flag, Patch Panel, Punch Block, Heat Shrink Tube Must Be 100% Compatible With The Brother Tze And Hse Tube Range Of Tapes Must Include: Ac Adapter, Li-ion Battery, 12mm Black On White Flexible Tape (8m), User Guide, Usb Cable, Carry Case, Wrist Strap And 3 Year Carry-in Warranty " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "multifunction Processmeter Fluke 789 Or Similar Approved Required Specification: Current Measurement: Range: 0-1 A Ac Or Dc Resolution: 1 Ma Accuracy: 0.2% + 2 Lsd (dc) Range: 0-30 Ma Resolution: 0.001 Ma Accuracy: 0.05% + 2 Lsd Current Sourcing: Range: 0-20 Ma Or 4-20 Ma Resolution: 0.05% Of Span Voltage Measurement: Range: 0-1000 V Ac (true-rms) Or Dc Resolution: 0.1 Mv To 1.0 V Accuracy: 0.1% Rdg + 1 Lsd (vdc) Frequency: Range: 0 To 19.999 Khz Accuracy: 0.005% + 1 Lsd Continuity: Beeps For Resistance <(><<)> 100 O Resistance Measurement: Range: 0 To 40 Mo Accuracy: 0.2% + 1 Lsd Diode Test: 2.0 V Shoes Diode Voltage Drop Display Current And % Of Span: Yes Auto Step, Auto Ramp: Yes Overvoltage Category: Iec 1010-1 Cat Iii 1000 V Iec 1010-1 Cat Iv 600 V Safety: Iec 1010-1, Ansi/isa S82.01-1994 C An/csa C22.2 No 1010.1-92 " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "32 Piece Electrician#s Backpack Tool Kit Hellermann Tyton Elecbp Or Similar Approved Requirements: 1 X Heavy Duty Uninsulated Crimper (1.5 - 16mm2) 1 X 8mm Socket Wrench Screwdriver, Overall Length = 330mm 1 X 10mm Socket Wrench Screwdriver, Overall Length = 330mm 1 X Led Headlight With Adjustable Settings, Output: 180lm, Power: 3 X Aaa Batteries, Runtime: 25hrs 1 X 38mm Cable Cutter 1 X Wire Stripper 1 X 160mm Long Nose Pliers (chrome Plated) 1 X 200mm Pliers (chrome Plated) 1 X 200mm Diagonal Cutter (chrome Plated) 1 X 200mm Adjustable Spanner 1 X Utility Knife 1 X 1000v Insulated Screwdrivers (7 Piece, Flat Blade <(>&<)> Phillips Inc Neon Tester) 1 X Universal Panel Key 1 X 5m Magnetic Tip Tape Measure 1 X 250mm Vice Grip 1 X 300g Ball Pein Hammer 1 X Junior Hacksaw 1 X 7 Piece Allen Key Set 1 X 250mm Groove Joint Pliers 1 X 300mm Groove Joint Pliers 1 X Toolbag Bag Dimensions " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "heavy Duty Rechargeable Worklight Avit Av15020 Or Similar Approved Required Specifications: Battery: 3.7v 4400mah, Recharge Via Usb Lumens: 1500 Lumens Wattage: 20 W Charging Time: 5-6 H Ip Rating: Ip65 Heavy Duty Rechargeable Worklight Avit Av15020 Or Similar Approved Required Specifications: Battery: 3.7v 4400mah, Recharge Via Usb Lumens: 1500 Lumens Wattage: 20 W Charging Time: 5-6 H Ip Rating: Ip65 " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za * "heavy Duty Gazebo Oztrail Deluxe 3.0 Hydro Flow Or Similar Approved Required Specifications: Canopy Material: Uv Resistant And Waterproof Canopy Size: 300 X 300 Cm Canopy Colour: Navy Canopy Fire Rating: Cpai-84 Complaint Frame: Reinforced Cross Gables For Increased Strength In Windy Conditions. Legs: Heavy Duty 32mm Powder Coated Steel With 3 Position Push Button Height Adjustment Canopy Strut System: Heavy Duty Straight Scissor Struts Height: 3 Position Height Adjustment # 193cm, 208cm Or 223cm Head Clearance At The Side. Pegs <(>&<)> Guy Ropes: Pre-attached Guy Ropes <(>&<)> Sturdy Pegs Included. Carry Bag: Wheeled Carry Bag For Transport <(>&<)> Storage Included. Must Include 2 Compatible Side Panels " Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services, Water And Sanitation Tel: 021 417 4148 | Cell: 076 521 5612 | Email: Marque.cupido@capetown.gov.za

Details: Description Invitation To Bid For The Procurement Of 1 Lot Rescue-related Materials And Equipment For Drrm Operation Center - 1st Posting (itb No. 110-goods-2024) 1. The Local Government Unit Of Sta. Cruz, Davao Del Sur, Through The General Fund For The 2024 Intends To Apply The Sum Of Five Hundred Fourty Six Thousand Eight Hundred Pesos (php 546,800.00) Being The Abc To Payments Under The Contract For Procurement Of 1 Lot Rescue-related Materials And Equipment For Drrm Operation Center - 1st Posting. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Qty Unit Of Issue Item Description Approved Budget For The Contract (abc) 1 3 Pcs Water Dispenser 6,600.00 (hot And Cold) Specs: Voltage: 230va.c. 60hz Refrigerant: R134a/45g Input Power: 635w Heating Power: 550w Cooling Power: 85w Cooling Current: 0.67a Hot Water: >90˚c 5l/h Cold Water: <10˚c 1.5l/h Relative Humidity: <90% 2 60 Pcs Rubber Rainboots 30,000.00 (black Color, Heavy Duty) 3 100 Pcs Plastic Monoblock Chair 85,000.00 ( White Color W/ Back Support) Specs: Seat Ht 375mm Seat Length: 355mm Side Legs Distance: 365 Mm Seat Width: 370mm Gross Weight: 2.28kg 4 10 Pcs Plastic Folding Long Table 40,000.00 (white Color, Heavy Duty, Shape: Rectangular, Depth: 30 Inches, Height: 30 Inches, Length: 96 Inches, 14 Gauge Steel Under Support 5 2 Refill Petroleum Gas (11kg) 3,000.00 6 1 Set Cylinder With Content (11kg/2pcs) 3,500.00 7 1 Set Cylinder With Content (22kg/2pcs) 8,000.00 8 1 Refill Petroleum Gas (22kg) 2,700.00 9 2 Set Kendrick Extrication Device 22,000.00 10 1 Roll Prusik Rope (6mm X 100 Meters) 12,000.00 11 10 Packs Safety Gloves 3,000.00 (color Black, Stretchable, Rubber Coated, 1 Pack 12 Pair) 12 29 Pcs Tactical Boots 92,800.00 13 29 Pcs Outdoor Helmet 43,500.00 14 29 Pcs Aqua Shoes 43,500.00 (ultra Light, Non Slip) 15 29 Pcs Tactical Full Finger Gloves 23,200.00 (sports Gloves, Anti Skid Breathable) 16 10 Pcs Life Saver Ring 17,000.00 ( Solid Plastic Bouy With Pvc And Polyethylene Foam) 17 10 Pcs Marine Life Saving Lifeguard/torperdo Buoy 15,000.00 18 29 Pcs Tactical Pants 58,000.00 (good Quality, Stretchable, Color Black) 19 19 Pcs Tactical Jacket 38,000.00 (good Quality, Stretchable, Color Black) Total 546,800.00 2. The Local Government Unit Of Sta. Cruz, Davao Del Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required At Fifteen (15) Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Secretariat Office At Old Municipality Of Sta. Cruz Hall Compound, Sta. Cruz, Davao Del Sur And Inspect The Bidding Documents At The Address During Weekdays Starting From 8:00 O’clock In The Morning To 5:00 O’clock In The Afternoon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Saturday, November 16, 2024 From The Given Address Below And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand (php 1,000.00) Pesos. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before 9:30 O’clock In The Morning Of Tuesday, November 26, 2024. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On 9:40 O’clock In The Morning Of Tuesday, November 26, 2024 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Local Government Of Unit Of Sta. Cruz, Davao Del Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Ommi Kharzom L. Buat Bac Head Secretariat Bac Secretariat Office, New Municipal Hall Of Sta. Cruz, Davao Del Sur. 09107650089 - E-mail Address:bac5stacruz@gmail.com Engr. Ray R. Sealana Bac Chairperson, Municipal Assessor