Scrap Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11107 With Available Items [refer Enclosure For The Approximate Weight].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets.s.1539 No.636425 Dt.20.08.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed/erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11105 With Available Items [refer Enclosure For List Of Available Items And The Approximate Weight].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1]wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets.s.1539 No.636423 Dt.20.08.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Erode)

Description: Scrap Iron And Steel Cut Up Parts Of Condemned Bobrm1, Boxnm1, Boxnr, Bvzc, Brna, & Bcnm1 Wagons No As Following: [1]er72029461988 Bobrm1 [2] Ser 10079461237 Boxnm1 [3] Er 10029560041 Boxnr [4] Nr 25039460052 Boxnr [5] Er 25029661001 Boxnr [6] Cr 85019460540 Bvzc [7] Cr 55018960365 Brna [8] Wr 25089760539 Boxnr [9] Ser 10079463576 Boxnm1 [10] Nfr 30058960995 Bcnm1 . Condition:-[1] Cutting Is Allowed For Loading Facilities Only. [2] Cutting Time Of Sold Wagons Of Jmpw/dhobighat Would Be 08.00 Hrs. To 16.00 Hrs. On Weekdays And 08.00 Hrs. To 12.00 Hrs. On Saturday. Purchaser, Their Labours Or Any Other Staff Will Not Be Allowed To Remain At Dhobighat Area Beyond The Scheduled Working Hour. The Purchaser May, However, Be Allowed To Keep Their Watchman To Guard Their Material. No Cutting Tools Will Be Allowed Inside Dhobighat Area On Sunday And Other Holidays. [3] To Be Sold Without All Available Excluded Fittings As Follows:- (i) For Boxnm1, Boxnr, Brna, & Bcnm1 : Bogie (except 22w & 22wm), Wheel Set With Ctrb, Brake Cylinder, Draft Gear, Coupler Body, Yoke & Yoke Pin, Distributer Valve, Yoke Supporting Plate, Yoke Pin Supporting Plate, All Sorts Of Bolster Springs, Slack Adjuster, Hand Brake Wheel, Knuckle, Anchor Plate With Safety Plate, Apm, Brake Beam Complete For Casnub Bogie, Equalising Lever With Bushes, Bogie Brake Push Rod.as Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024. (ii) For Bobrm1 : Bogie (except 22w & 22wm), Wheel Set With Ctrb, Brake Cylinder, Draft Gear, Coupler Body, Yoke & Yoke Pin, Distributer Valve, Yoke Supporting Plate, Yoke Pin Supporting Plate, Dom Cylinder, Square Shaft, All Sorts Of Bolster Springs, Slack Adjuster, Hand Brake Wheel, Knuckle, Anchor Plate With Safety Plate, Lsd, Apm, Brake Beam Complete For Casnub Bogie, Equalising Lever With Bushes, Bogie Brake Push Rod.as Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024. (iii) For Bvzc : Wheel Set With Rb And Axle Box, Brake Cylinder, Distributer Valve, Draft Gear, Coupler Body, Yoke & Yoke Pin As Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024

Details: Description:- Exposing Of Damaged Rcc Columns, Beams , Slabs, Soffit Of Rcc Girders & Deck Slab etc Including Removal Concrete/plaster Upto 6mm Beyond Main Reinforceemnt Carefully By Means Of chisel & Hammer Or Mechanically Along With Cleaning & Scraping Of Exposed Area Of Reinforcement ( wherereinforcemntisvisible)bywirebrush/compreessedair,reectinghorizontalplatformsat working Levels To Collect The Debrish Including Scaffolding At Any Height, Provifding Net All Round thescaffolding & Removal Of Debris & Carry Away Out Side The Premisess With All Contractor's Tools, materials&labours,transportation&disposalofsameasperdirectionofengineerincharge complete In All Respect 9 Note- Measurement Shall Be Given For Exposed Area Of Concrete).

Description: CATEGORY: E2 4-22-6402-000 BELLOWS , E2 IEB-CZECH-SAM-1409 FILTER ELEMENT MS 100 , E2 IEB-CZECH-SAM-3-22-1761- 004 RING , E2 IEB-CZECH-SAM-3-22-5146-001 , E2 IEB- CZECH-SAM-3-22-5666-003 , E2 IEB-CZECH-SAM-4-22-1746- 001 , E2 IEB-CZECH-SAM-4-22-1746-010 , E2IEB-CZECH- SAM-4-22-1751-000 RING , E2IEB-CZECH-SAM-4-22-1761- 015 RING , E2 IEB-CZECH-SAM-4-22-5146-000 GLAND PACKING , E2 IEB-CZECH-SAM-CSN-022930 10399429 CIRCLIP 120 , E2 IEB-CZECH-SAM-CSN-022930-30CIRCLIP 30 , E2 IEB-CZECH-SAM-CSN-029280-2-145X130 RING 145X130 MASTER CYLINDER TABLE-12 , E2 IEB-CZECH-SAM-CSN- 029281-2-240X5 RING 240X5 , E2 IEB-CZECH-SAM-CSN- 029295 OIL SCRAPER RING 80 , E2 IEB-CZECH-SAM-CSN- 029295-100 OIL SCRAPPER RING 100 , E2 IEB-CZECH-SAM- CSN-029310-2 10517471 SEALING RING 8X12 , E2 IEB- CZECH-SAM-ON-029269-3-100X120 CUP PACKING 100X120 CRADLE CYL TAB-13 , E2 IEB-CZECH-SAM-ON-029269-3- 125X145 CUP PACKING 125X145 MAST CYL TAB-12 , E2 IEB- CZECH-SAM-ON-029269-3-80X90 CUP PACK 80X90 MAST CLY TABLE 12

Description: Locos-02nos - Sale Is On Number Basis And Delivery Is By Lot (the Fdp Is 65 Days For This Lot). Lot No 5364 24 09 82 Gtl Gy Cond Locos Ap. Available With Sse Dsl Gy. Scrap Condemned Unserviceable Two Numbers Of Bg Wdm3d Ge Diesel Alco Locomotive Nos.11119 And 11124. Each Locomotive Consisting Of Ferrous Items- 89.279mt, Copper Items-07.763mt, Brass Items- 0.903mt, Aluminium Items-0.411mt, Insulation/rubber Items ¿ 0.700mt. Total Quantity Of Each Loco Is 99.058mt. Approximately. Grand Total Of All The Items For Two Locos Is As Follows - Ferrous Items - 178.558 Mt, Copper Items-15.526mt, Brass Items-1.806mt, Aluminium Items-0.822mt, Insulation/rubber Items ¿ 1.400mt. Total Quantity For Two Locos Is 198.116 Mt. Detailed Break Up Of All The Major Condemned Items (items 1 To 95) And Reclaimable Items List (items 1&2) For Both Locos Along With The Weights Is As Per The Annexures Enclosed Herewith. Delivery On Lot Basis. Sale On Number Basis. Available In Gooty Diesel Loco Shed. Hsn Code: 720429/gst 18%. Ds.8 No.536480018 And 536480019, Dt. 19.09.24. For Full Description Along With The Annexures Of Two Loco¿s Reclaimable Items And Major Condemned Items And Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. The Fdp Is 65 Days For This Lot. Important Note To Bidders: (1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances.(2) Bidders May Visit The Loco Shed For Physical Inspection Of The Material And The Premises Of The Lot, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side.5) Gas/chisel Cutting Is Permitted ,if Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Such As Fire Extinguishers Etc, Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) Railways Reserve The Right To Provide Placement Of Locos After The Date Of Auction Depending Upon The Availability Of Space For Cutting. If Any Hsd Oil Available In Fuel Tank Of The Said Locos, The Same May Be Return To The Custodian, Railways Are Not Responsible For Any Shortage.

Description: Locos-02nos - Sale Is On Number Basis And Delivery Is By Lot (the Fdp Is 65 Days For This Lot). Lot No 5321 24 09 60 Gtl Gtl Con Locos Ap. Available With Sse Dsl Gtl. Scrap Cond.unserviceable Alco Diesel Locomotives 02nos. Of 14779/wdg 3a And 14898/wdg 3a . 1) Ferrous Items Weight- 191678.000 Kgs (approx). 2) Copper Items Weight- 13176.000 Kgs (approx). 3) Brass Items Weight- 1680.000kgs (approx). 4) Aluminium Items Weight- 1284.000 Kgs (approx)5)insulation/rubber- 1432.000 Kgs(approx). Total: - 209250.00 Kgs (approx). 1) For Loco No. 14779/wdg3a Rc Items List Are Enclosed At Annexure-ii, From 1 To 2 And Major Condemned Items List Enclosed At Annexure-i, From 1 To 86. 2) For Loco No. 14898/wdg3a Rc Items List Are Enclosed At Annexure-ii, From 1 To 2 And Major Condemned Items List Enclosed At Annexure-i, From 1 To 86. Delivery On Lot Basis. Sale On Number Basis. Available At Diesel Loco Shed, Guntakal. Hsn Code: 720429/gst 18%. Ds.8 No.053211038 And 053211039, Dt. 14.09.24. For Full Description Along With The Annexures Of Two Loco¿s Reclaimable Items And Major Condemned Items And Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. The Fdp Is 65 Days For This Lot. Important Note To Bidders: (1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances.(2) Bidders May Visit The Loco Shed For Physical Inspection Of The Material And The Premises Of The Lot, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side.5) Gas/chisel Cutting Is Permitted ,if Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Such As Fire Extinguishers Etc, Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) Railways Reserve The Right To Provide Placement Of Locos After The Date Of Auction Depending Upon The Availability Of Space For Cutting. If Any Hsd Oil Available In Fuel Tank Of The Said Locos, The Same May Be Return To The Custodian, Railways Are Not Responsible For Any Shortage.

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 16867 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc] - 1no. S.1539 No.124441 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis. [2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 14640 With Available Items (refer Enclosure For The Approximate Weight).location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete (axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings)-6 Sets.[2]locomotive Batteries-8 Nos. S.1539 No.534317 Dt.17.10.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed/ernakulam)

Details: Sources Sought Notice manufacturing Circulated, Uncirculated And Proof Copper-plated-zinc Planchettes this Is Not A Solicitation, Request For Quote (rfq) Or Proposal (rfp). This Sources Sought Notice Is For Informational And Planning Purposes, Only. This Announcement Is Strictly Intended For Market Research And Shall Not Be Construed As A Solicitation, Obligation Or Commitment By The Government. please Note, In Accordance With 31 U.s.c. §5136, No Provisions Of Law Governing Procurement Or Public Contracts Are Applicable To The Procurement Of Goods Or Services Necessary For Carrying Out The United States Mint Programs And Operations. the United States Mint, Manufacturing Procurement, Washington, Dc Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For Circulating And Un-circulated Copper-plated Zinc (cpz) One-cent Planchets To Be Delivered To The Philadelphia And Denver Mints. Also Included In This Requirement Is Proof Cpz One-cent Planchets For The San Francisco Mint. Cpz Planchets Shall Be In Accordance With The Requirements And Specifications Set Forth Herein the Raw Material Acquired Must Produce Coins That Are Compatible With Existing Coinage In Circulation Within The Vending, Banking, Commerce As Well As The General Public. The Raw Material Breaks Down Into Two Separate Alloys. The One-cent Alloy Composed Of 2.5% Copper (cu) And 97.5% Zinc (zn). general Specifications For United States Mint Coinage Strip: plated Blank Dimensions Of Standard Cpz Planchets Weight (individual Blank) 2.50 Grams ± 0.16 Grams Plated Diameter 18.75 Mm ± 0.05 Mm Plated Gauge 1.255 Mm ± 0.043 Mm (preferred Tolerance ± 0.030 Mm) Plating Thickness 0.008 Mm + 0.017 Mm/-0.003 Mm Upset Configuration Same As Pre-plated (c.2.1) Upset Edge Thickness 1.461 Mm ± 0.076 Mm Overall Thickness 1.626 Mm Maximum “a” Dimension On Upset 0.64 Mm ± 0.05 Mm “b” Dimension On Upset 1.27 Mm + 0.13 Mm/-0.00 Mm Estimated Volume Requirements: denomination annual Volume pieces weekly Volume kilogram/pieces 1-cent 2.5 – 5 Billion 40 – 260 M in Addition, The United States Mint Generates Scrap. The Contractor Must Be Able To Recycle And Use Returned Scrap From The Coining Process As Feed Stock For Future Coinage Strip. the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 3314. if Your Organization Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, E-mail Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By December 31, 2024. All Responses Under This Sources Sought Notice Must Be Emailed To James.bacinski@usmint.treas.gov & Amalee.elayyan@usmint.treas.gov.