Scanning Tenders

Details: Description 1. 2 Pcs. 16port Switch Unmanaged Specifications: 16 10/100/1000mbps Ports / Innovative Energy-efficient Technology Saves Power Consumption / Supports Mac Address Self-learning, Auto Mdi/mdix And Auto-negotiation / Plug & Play Design 2. 20 Pcs. Atx Casing W/ 500w Psu Specifications: Support Mini-itx, Microatx, And Atx Supports Up To 6 Fans, Including One 120mm Fan In The Front ,air Vents On The Side Panel For Great Ventilation, Supports Up To 1 Odd, 3 Hdds, And 2 Ssds Slot For Great Expandability Supports High-end Graphics Cards Up To 322mm / 12.7 Inch 3. 4 Pcs. Barcode Scanner Voyager Single Line Lase Specifications: Applications: Retail / Point Of Sale Decode Capability: 1d/2d Brightness: 0 - 100000 Lux Scan Pattern: Area Image Motion Tolerance: 70 Cm/s (27.6 In/s) For 13 Mil Upc At Optimal Focus Scanning Range: Standard Range (sr) Engine Type: 2d Aimer Type: Led Interface: Usb Tumble Specifications: 1,000 0.5 M (1.6 Ft) Tumbles Drop Specifications: 30 1.8 M (6 Ft) Drops To Concrete Protection Ratings: Ip52 Power Connector Type: Corded 4. 2 Pcs. Battery Charger 12v 24v Specifications: Material: Metal Output: 12v-24v Input: 130v-250v Charging Current: 4000ma Input Related Power: 400w Output Current: 12v-40a/24v-20a Input Cable Length: 110cm/43.23inch Item Size: 18*14.5*7cm/inch(l*w*h) Net Weight: 1200g/42.33oz 5. 10 Packs. Cable Tie (black) Specifications: Nylon Cable Tie 4 X 250 Mm 100 Pcs Per Pack-black 6. 20 Pcs. Contact Cleaner 400ml Contact Cleaner Is A Non-cfc, Non-hcfc Cleaning Solvent For General Industrial And Maintenance Use. It Effectively Dissolves And Removes Dust, Dirt, Grime, Grease, Tar, Adhesives And Flux From Electrical And Electronic Contact Points. It Is Quick Drying And Evaporates Without Leaving Any Residue. This Product Is Suitable For Use On Electronic Parts, Metal And Most Plastics. 7. 2 Pcs. Digital Multimeter, Portable 6000 Counts Auto Specifications: Material:abs Color:gray Sample Rate: 3 Times Per Second Display:6000 Counts Auto Range:yes True Rms:yes Date Hold:yes Low Voltage Indication:yes Auto Power Off:yes Over Range Indication:ol Backlight:yes Diode Test:yes Continuity Test:yes Main Measurements:ac/dc Voltage,ac/dc Current,resistance,capacitance,frequency,duty Cycle,diode,continuity Testing And Temperature. Dc Volts:60mv/600mv±(0.5%+3),6v/60v/600v/1000v±(0.5%+3) Ac Volts:6v/60v/600v/750v±(1.0%+3),60mv/600mv±(1.0%+3) Dc Current:6a/10a±(1.2%+3),60ma/600ma±(1.2%+3) Ac Current:6a/10a±(1.5%+3),60ma/600ma±(1.5%+3) Resistance:600ω/6kω/60kω/600kω/6mω±(0.5%+3),60mω±(1.5%+3) Capacitance:9.999nf±(5.0%+20) 99.99nf/999.9nf/9.999μf/99.99μf/999.9μf±(2.0%+5) 9.999mf±(5.0%+5) Frequency:99.99hz/999.9hz/9.999khz/99.99khz/999.9khz/9.999mhz±(0.1%+2) Duty Cycle:1%~99%±( 0.1%+2) Temperature:(-20~1000)°±(2.5%+5) (-4~1832)°±(2.5%+5) Working Environment: 0~40c, Relative Humidity<75% Supply Power:1.5v Aaa Battery * 2 (not Included) Product Weight:127g Product Size:125mm * 65mm * 24 Mm Package Size:16 * 9.7 * 4.5cm / 6.3 * 3.8 * 1.8in Package Weight:251g/0.55lb 8. 15 Pcs. Fingerprint Scanner Specifications: Fips 201 Piv Certified Low Power Consumption Fine-grained Power Control Compact Size Landing Lights For Finger Tracking Red/green Status Leds Blue Illumination 500dpi And 1000dpi Images High-durability Glass Top Surface Ip64-rated Top Surface Sealed Against Dust And Liquid High Quality Fingerprint Image Counterfeit Finger Rejection Drivers And Sdks For Windows, Windows Ce, Linux 9. 2 Pcs. Fish Tape Reel Wire Cable Puller 30m Specifications: Type:cable Pullercolor:black+redmaterial: Nylon Fiberglass +abslength: 15/20/30m （optional）pack Size: 380 * 290 * 35mmapplication: For Pulling Wire And Cablepacking List:1 * Wire Puller 10. 5 Pcs. Graphics Card 4gb 1650 Oc Specifications: Powered By Geforce® Gtx 1650 Nvidia Turing™ Architecture And Geforce Experience™ Integrated With 4gb Gddr5 128-bit Memory Interface Windforce 2x Cooling System With Alternate Spinning Fans 80 Mm Unique Blade Fan Core Clock 1710 Mhz (reference Card Is 1665 Mhz) 11. 5 Pcs. Hdmi 3mtrs Specifications: Temperature Resistance, Withstand Voltage, Anti-oxidation. Low Lead And Low Cadmium Environmental Protection Materials. High Quality Pvc Coating, Wear Resistant, Acid And Alkali Resistant, Flexible And With Long Strong Service Life. Suitable For :lcd Tv, Projector, Game Console, Computer, Set-top Box 12. 2 Pcs. Hdmi4k 60m Extender W/ Power Supply Specifications: Length Of Cat5e/cat6 Cable Between Rx And Tx: 60 / 100 / 120 Meters Hdmi Input: 4k/1080p/720p/576p/576i/480p/480i Hdmi Output: 4k/1080p/720p/576p/576i/480p/480i / 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i Max Bandwidth: 340mhz Max Baud Rate: 3x3.4gbps Input Video Signal: 0.5~1.5volts P-p Output Ddc Signal: 5volts P-p (ttl) Input Hdmi Cable Distance: ≤10m Awg26 Hdmi Standard Cable Output Hdmi Cable Distance: ≤10m Awg26 Hdmi Standard Cable Tx Max Working Current: 350ma Rx Max Working Current: 200ma Power Adapter Format: Input:ac (50hz, 60hz) 100v-240v; Output: Dc5v/1a Operating Temperature Range: (0 To +45℃) / (-15 To +55℃) Operating Humidity Range: 5 To 90%rh (no Condensation) Dimension (l X W X H): 84x47x22(mm) / 81x47x22(mm) Tx Weight: 101g Rx Weight: 101g 13. 29 Pcs. Keyboard/ Mouse Combo Wired Specifications: Keycaps: Traditional Hotkeys: 12 Fn Multimedia Hotkeys Character: Laser Engraving Splash Proof: Yes Adjustable Keyboard Legs: Yes Rating: 5 V / 100 Ma Cable Length: 150 Cm Hardware Connectivity: Usb Illuminated: No Mouse: Op-330 / Op-330s Type: Wired Ergonomic Design: Symmetric Sensor: Optical Resolution: 1200 Dpi Buttons No.: 3 Port: Usb Cable Length: 150 Cm Mouse Weight: 85 G (w/ Cable) System Requirements: Windows 7 / 8 / 8.1 / 10 14. 2 Pcs. Lan Network Lcd Phone Telephone Wire Tracker Specifications: Lan Network Length Cable Tester Lcd Phone Telephone Wire Tracker For Ping / Poe Bnc Rj45 Rj11 Line Testing Poe Function: Identify Which Pins Are Providing Power And Detect How Much Voltage Ping Function To Test Network Performance, Data Packet, Min & Max Time Tone Trace Cable With Complete Ac Interference Rejection Hub Blink For Locating Network Port By The Flashing Port Light On Hub / Switch Tf Function To Import And Export Data From Comupter (160 Sets, Txt Format) Poe Function: Identify Which Pins Are Providing Power And Detect How Much Voltage Ping Function To Test Network Performance, Data Packet, Min & Max Time Tone Trace Cable With Complete Ac Interference Rejection Hub Blink For Locating Network Port By The Flashing Port Light On Hub / Switch Tf Function To Import And Export Data From Comupter (160 Sets, Txt Format) 15. 2 Pcs. Label Printer Black Specifications: Accepts 6mm, 9mm, 12mm And 18mm Tape Widths Support 14 Font Types, 87 Frames And 780 Symbols Support Barcode Printing Backlit Lcd Screen For A Clearer View Store Up To 50 Custom Label Designs For Instant Recall 16. 2 Pcs. Laser Rangefinder 300ft/100m Backlit Lcd Screen Specifications: Power Source: 3.7v 850mah Lithium Battery Measuring Accuracy: ±2mm(±1/16inch) Angle Range:±90° Working Range：100m Display Style：backlit Lcd Measuring Units: M/in/ft Mount Size: 1/4"-20 Recharge : Usb Charging 17. 3 Pcs. Magnetic Access Control Electric Door Lock Id (kit) Specifications: This Rfid Proximity Access Controller Using Proximity System Is One Of The Modern Access Control Systems. The State-of-the-art Cpu And Integrated Circuit Techniques Are Applied To Keep All The Data From Loss Due To Power Failure. It Is Powerful And Can Open The Door Using Proximity Cards, Passwords, Or The Hybrid. The Access Controller Can Provide Users With More Convenience By Connecting To Terminals, Including The Button For Opening The Door, Doorbell, And Electric Lock That Is Normally Open Or Closed. This Product Offers A Method For Controlling Access Safely And Automatically, Qualifying It As An Ideal Equipment For Businesses, Offices, Factories, And Communities. Maximum Card Distance: 10-15cm Features: This Rfid Proximity Access Controller Using Proximity System Is One Of The Modern Access Control Systems. The State-of-the-art Cpu And Integrated Circuit Techniques Are Applied To Keep All The Data From Loss Due To Power Failure. It Is Powerful And Can Open The Door Using Proximity Cards, Passwords, Or The Hybrid. The Access Controller Can Provide Users With More Convenience By Connecting To Terminals, Including The Button For Opening The Door, Doorbell, And Electric Lock That Is Normally Open Or Closed. This Product Offers A Method For Controlling Access Safely And Automatically, Qualifying It As An Ideal Equipment For Businesses, Offices, Factories, And Communities.electric Magnetic Lock Specifications: Lock Size: Approx. 115*115*20mm Net Weight: Approx. 122g Voltage: Dc+8v-15v(standard Dc12v) Current: Undrive The Lock: ≤70ma; Open The Lock: ≤1000ma Working Temperature: -10℃-70℃ Working Humidity: 0-100% Frequency: 125khz(em Card) 13.56mhz(m1 Card) Maximum Card Distance: 10-15cm Verification Methods: Cards, Passwords Initial Programming Password: 123456power Supply Specifications: Net Weight: Approx. 290g Size: Approx. 115*68*34mm/4.52*2.67*1.33'' Input Voltage: 110-240v Ac Input Frequency: 50-60hz Output Voltage: Dc 12v Output Current: 3apush Release Button Exit Switch Specifications: Size: Approx. 85*85*35mm/3.34*3.34*1.37'' Net Weight: Approx. 57gcontrol System Keypad Specifications: Size: Approx. 170*40*22mm/6.69*1.57*0.86'' Net Weight: Approx. 870gnote: Please Allow 1-3mm Differs Due To Manual Measurement. Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding. 18. 10 Pcs. Memory Ddr4 16gb 3200mhz With Heatsink Specifications: Internal Memory: 8 Gb Internal Memory Type: Ddr4 Clock Memory Speed: 3200 Mhz Component For: Pc / Server Memory Factor Form: 288-pin Dimm Memory Design (modules X Size): 1 X 4 Gb Cas Latency: 15 Memory Voltage: 1.2 V Lead Plate: Gold Module Configuration: 512m X 64 Row Cycle Time: 45 Ns Row Cycle Update Time: 260 Ns Active Time In Line: 29,125 Ns Spd Profile: Yes Intel® Extreme Memory Profile (xmp): Yes Memory Type: Pc-19200 Memory Without Buffer: Yes Compatible Chipset: Intel X99 Memory Rating: 1 19. 60 Pcs. Memory Ddr4 8gb 3200mhz With Heatsink Specifications: Internal Memory: 8 Gb Internal Memory Type: Ddr4 Clock Memory Speed: 3200 Mhz Component For: Pc / Server Memory Factor Form: 288-pin Dimm Memory Design (modules X Size): 1 X 4 Gb Cas Latency: 15 Memory Voltage: 1.2 V Lead Plate: Gold Module Configuration: 512m X 64 Row Cycle Time: 45 Ns Row Cycle Update Time: 260 Ns Active Time In Line: 29,125 Ns Spd Profile: Yes Intel® Extreme Memory Profile (xmp): Yes Memory Type: Pc-19200 Memory Without Buffer: Yes Compatible Chipset: Intel X99 Memory Rating: 1 20. 50 Pcs. Monitor 1080p 70hz 24"~24" Ips Panel Hdmi Vga Specifications: Screen Size (class): 24 Flat / Curved: Flat Active Display Size (hxv) (mm): 527.04 X 296.46 Mm Aspect Ratio: 16:9 Panel Type: Ips Brightness (typical): 250 Cd/㎡ Brightness (min): 200 Cd/㎡ Contrast Ratio Static: 1000:1(typical) Resolution: 1,920 X 1,080 Response Time: 5 (gtg） Viewing Angle (h/v): 178°/178° Color Support: Max 16.7m Color Gamut (ntsc 1976): 72% (cie 1931) Refresh Rate: Max 75hz 21. 45 Pcs. Motherboard (m.2 Slot) Specifications: Processor Support Intel® Core™ 14th/ 13th/ 12th Gen Processors, Intel® Pentium® Gold And Celeron® Processors 1 Processor Socket Lga1700 Please Go To Www.msi.com To Get The Newest Support Status As New Processors Are Released. See Supported Processors Chipset Intel® H610 Chipset Memory 2x Ddr4 Memory Slots, Support Up To 64gb 1 Supports 1r 2133/ 2666/ 2933/ 3200 Mhz (by Jedec & Por) Supports Dual-channel Mode Supports Non-ecc, Un-buffered Memory Please Refer To Www.msi.com For More Information On Compatible Memory. See Supported Memory Expansion Slot 1x Pcie X16 Slot (from Cpu) Supports Up To Pcie 4.0 X16 1x Pcie X1 Slot Supports Pcie 3.0 X1 1x M.2 Slot With E-key For Pcie Wifi Module Only (m2_wifi1) Onboard Graphics 1x Hdmi™ 2.1 With Hdr Port, Supports A Maximum Resolution Of 4k 60hz 1 / 2 1x Vga Port, Supports A Maximum Resolution Of 2048x1536 50hz, 2048x1280 60hz, 1920x1200 60hz 1 / 2 Available Only On Processors Featuring Integrated Graphics.graphics Specifications May Vary Depending On The Cpu Installed. Sata Ports 4x Sata 6gb/s Ports1 Sata7 Will Be Unavailable When Installing M.2 Sata Ssd In The M2_1 Slot. M.2 Ssd Slot 1x M.2 Slot (key M, From Chipset) 1 Supports Up To Pcie 3.0 X4 Supports Up To Sata 6gb/s Supports 2242/ 2260/ 2280 Storage Devices Supports Intel® Smart Response Technology For Intel Core™ Processors Sata7 Will Be Unavailable When Installing M.2 Sata Ssd In The M2_1 Slot Audio Realtek® Alc892/ Alc897 Codec 7.1-channel High Definition Audio Lan 1x Intel® I219v 1gbps Lan Controller Power Connectors 1x 24-pin Atx Main Power Connector 1x 8-pin Atx 12v Power Connector Usb Intel® H610 Chipset 4x Usb 3.2 Gen 1 5gbps Ports (2 Type-a Ports On The Back Panel, 2 Ports Available Through The Internal Usb Connector) 6x Usb 2.0 Ports (4 Type-a Ports On The Back Panel(hub-gl850g), 2 Ports Available Through The Internal Usb 2.0 Connector) Fan Connectors 1x 4-pin Cpu Fan Connector 1x 4-pin System Fan Connector System Connectors 1x Front Panel Audio Connector 2x System Panel Connectors 1x Chassis Intrusion Connector 1x Tpm Module Connector Jumpers 1x Clear Cmos Jumper Led Features 4x Ez Debug Led Back Panel Ports Hdmi™ Vga Keyboard/mouse Usb 3.2 Gen 1 5gbps Type-a Lan Port Audio Connector Usb 2.0 22. 20 Pcs. Power Supply 500 Watts 80+ Specifications: Dc Output: 500w Power Density: 277w Per Liter Load Range: +3.3v +5v +12v +5vsb -12v (amps): 18a 17a 38a 2.5a 0.3a Peak (amps): (amps): 0a 0a 0a 0a 0a Range (%): ±5% ±5% ±5% ±5% ±10% Line Reg.(%): ±1% ±1% ±1% ±1% ±1% Ripple(mvp-p): 50mv 50mv 120mv 50mv 120mv Combined +3.3v & +5v: 110w Combined +12v: 456w Input Voltage: 180 ~ 264vrms Input Frequency Range: 47hz ~ 63hz Pfc : Active Pfc.（pf>0.9 At Full Load） Efficiency: 82%~85% @ 20% ~ 100% Loading Mtbf: 100,000 Hours Operating Temperature: 0°c ~ 40°c Protection: Over Power Protection Over Voltage Protection Short Circuit Protection Connectors 1 X 24 / 20-pin Motherboard Connector（500mm） 1 X 8 / 4-pin Eps / Atx 12v Connector（750mm） 2 X 8 / 6-pin Pcie Connector（"500mm / 150mm"） 2 X Sata Connector And 1 X 4-pin Peripheral Connector And 1 X 4-pin Floppy Connector （500mm / 150mm / 150mm / 150mm） 2 X Sata Connector And 2 X 4-pin Peripheral Connector（500mm / 150mm / 150mm / 150mm） Cooling System: Silent 120mm Fan Noise Level : 18 Dba Minimum Dimension: 150 Mm (w) X 86 Mm (h) X 140 Mm (d): 5.91" (w) X 3.39" (h) X 5.51" (d) Weight: 1.31kg Certification: 80 Plus Other: Gpu Support List Compatible With Atx12v V2.4 Features: High Efficiency With 80 Plus Certifications 24/7 Continuous Power Output With 40℃ Operating Temperature Class-leading Single +12v Rail Active Pfc Circuitry Pci-e 8pin And Pci-e 6pin Connector Support Silent Running 120mm Fan With 18dbap Powerful Single +12 Rail Design, Perfect For The Future High-end Component Upgrades Or Overclocking 23. 40 Pcs. Processor 4 Cores 8 Threads With Cpu Fan Specifications: • 4 Cores (4 P-cores + 0 E-cores) And 8 Threads. • Performance Hybrid Architecture Integrates Two Core Microarchitectures, Prioritizing And Distributing Workloads To Optimize Performance • Up To 4.5 Ghz. 12m Cache • Turbo Boost Max Technology 3.0, And Pcie 5.0 & 4.0 Support. Optane Memory Support. Laminar Rh1 Cooler Included 24. 5 Pcs. Punch Down Tool Specifications: Type: Wire Tracker Origin: Mainland China Certification: Rohs Features 1: For Keystone Jack Features 2: Network Impact Tool Features 3: Punch Down Tool Features 4: Insert Cutter Cable Terminat Features 5: Rj45 Tool Features 6: Double Cutter Head Design Features 7: 110 Blade Type: 110 Idc 25. 6 Boxes. Rj45 Pass Through (100pcs Per/box) Specifications: 100pcs Rj45 Metal Pass Through Description: They Are Really 100% Brand New With High Quality Ez Rj45 Cat6 Pass Through( Open End ) 8p8c Modular Plug Lan Network Connector. Ez Rj45 Design Allows The Wires To Pass Through The Connector So The Twists In Each Pair Can Be Pulled Closer To The Contacts Than Conventional Plug. Maintaining The Twists To The Point Of Termination Significantly Decreases Crosstalk And Markedly Increases Performance. Fully Shielded Products Provide Reduced Pair-to-pair Crosstalk, Alien Crosstalkand Considerably Improved Immunity To Noise At All Frequencies. Substantially Improve Noise Immunity At All Frequencies, Especially Above 30 Mhz 26. 5 Pcs. Router Dual Band Wi-fi 6 Mu-mimo Gigabit Specifications: Next-gen Gigabit Wi-fi 6 Speed—2402 Mbps On 5 Ghz And 574 Mbps On 2.4 Ghz Band Ensure Smoother Streaming And Faster Downloads. Connect More Devices—ofdma Technology Increases Capacity By 4 Times To Enable Simultaneous Transmission To More Devices. Ultra-low Latency—enables More Responsive Gaming And Video Chatting. Expanded Wi-fi Coverage—four High-gain External Antennas And Beamforming Technology Combine To Extend Strong, Reliable Wi-fi Throughout Your Home. Tp-link Homeshield - Enhanced Security Defends Against The Latest Cyber Threats. Improved Battery Life—target Wake Time Helps Your Devices To Communicate More While Consuming Less Power. Compatible With Alexa—control Your Router Via Voice Commands And Make Your Life Smarter And Easier With Amazon Alexa. 27. 29 Pcs. Solid State Drive 480gb 2.5" Sata Specifications: Form Factor: 2.5" Max Sequential Read: Up To 535 Mbps Max Sequential Write: Up To 445 Mbps Interface: Sata Revision 3.0 (6 Gb/s) Operating Temperature: 32ºf To 158ºf (0ºc To 70 ºc) Vibration: 5 Grms, 10-2000 Hz / 4.9 Grms, 7-800 Hz Shock: Resistant Up To 1500g More Than 20x Better Performance Than Typical Hdd Device Type: Internal Solid State Drive (ssd) All Data Storage Are Not Exact In Stated Capacity. All Electronic Storage Has Hidden Partitions For Its Functions Tools. All These Hidden Partitions Will Not Be Shown In Windows Explorer, And Disk Management Does Not Give An Option To Browse Contents Of These Partitions. Also, The Binary Measurement Is Different And Not Eaxct For Units Stated Capacity. You May Research For It For More Info. Based On Internal Testing; Performance May Be Lower Depending On Host Device, Interface, Usage Conditions And Other Factors. 28. 45 Pcs. Solid State Drive 500gb M.2 Nvme 2280 Specifications: Gen 4x4 Nvme Pcie Performance Up To 3,500mb/s Read, 2,100mb/s Write Cloning Software Not Included Part Number: Snv2s/500g Specifications Form Factor M.2 2280 Interface Pcie 4.0 X4 Nvme Capacities 500gb Sequential Read/write 500gb – 3,500/2,100mb/s Endurance (total Bytes Written) 500gb – 160tb Storage Temperature -40°c~85°c Operating Temperature 0°c~70°c Dimensions 22mm X 80mm X 2.2mm Weight 7g (all Capacities) Vibration Operating 2.17g (7-800 Hz) Vibration Non-operating 20g (20-1000hz) Mtbf 1,500,000 Hours 29. 5 Pcs. Type C Usb Hub 7 In 1 Specifications: 7-in-1 Hdmi Rj45 Model : Hdmi + Rj45 + Sd + Tf + 2*usb3.0 + Pd 30. 50 Pcs. Uninterrupted Power Supply (ups) 650va 230v Specifications: Output Max Configurable Power (watts) 375 Watts / 650va Output Frequency (sync To Mains) 50/60 Hz +/- 1 Hz Unsynchronised Topology Line Interactive Waveform Typestepped Approximation To A Sinewave Transfer Time6 Ms Typical : 10 Ms Maximum Input Input Frequency50/60 Hz +/- 5 Hz Auto-sensing Input Voltage Range For Main Operations170 – 280v Number Of Power Cords 1 Batteries & Runtime Battery Type Lead-acid Battery Typical Recharge Time 8 Hour(s) Nominal Battery Voltage12 V Expected Battery Life 3 – 5 Communications & Management Control Panelled Status Display With On Line : On Battery Audible Alarm Alarm When On Battery : Distinctive Low Battery Alarm Surge Protection And Filtering Surge Energy Rating156joules Physical Maximum Height 93mm, 9.25cm Maximum Width 161mm, 16.05cm Maximum Depth 305mm, 30.5cm Net Weight 4.5kg 31. 50 Pcs. Ups Battery 12v, 7.2ah Specifications: Ups Battery Heavier Build Thicker And Better Terminals Flame Retardant Voltage: 12 Volts Capacity: 7.2 Ampere Valve Regulated Sealed Lead-acid Battery 32. 2 Boxes. Utp Cable Cat5e (305m/box) Specifications: Number Of Pairs: 4 Total Number Of Conductors: 8 Awg: 24 Stranding: Solid Conductor Material: Bc - Bare Copper Insulation Material: Po - Polyolefin Outer Shield Material: Unshielded Outer Jacket Material: Pvc - Polyvinyl Chloride Plenum (y/n): N Plenum Number: Bl-1585a Tested To 100mhz And Meets Or Exceeds The Tia/eia 568a Standard And Is Third Party Party Verified.24 Awg Solid Bare Copper, 4 Twisted Pairs, Jacket Sequentially Marked At Two Foot Intervals.suitable Applications: Premise Horizontal Cable,gigabit Ethernet,100basetx,100basevg Anylan,155atm,622atm,ntsc/pal Component Or Composite Video,aes/ebu Digital Video,rs-422. Cat5e (200mhz), 4-pair, U/utp-unshielded, Riser-cmr, Premise Horizontal Cable, 24 Awg Solid Bare Copper Conductors, Polyolefin Insulation, Ripcord, Pvc Jacket. 33. 50 Pcs. Vga To Hdmi Adapter Specifications: Hdmi Input : The Hdmi Input Interface Vga Output:vga Signal Output Interface Hdmi To Vga Cable Converts Hdmi Digital Video And Audio Signals Into Analog Of The Vga Interface And Audio Output. Convert The Hdmi Output Port On Your Envy Or Voodoo Laptop To An Analog Vga Input With The Hdmi To Vga Conversion Adapter. It Supports Full-size High-definition Resolution Of 720p Or 1080p. Can Use For All Hdmi Input And Vga Output Device. Computer Accessories For Computer Set For Desktop Computer Set 34. 10 Pcs. Web Cam Full Hd 1080p Specifications: Full Hd 1080p, 1920*1080 Pixels | Full Hd Glass Lens | 70 Degrees | Fixed Focus | 60cm And Beyond | Digital Hd Omni-directional Mic | Color Black 35. 10 Pcs. Wireless Device Dual 2.4hz/ 5ghz Specifications: Product Name Wireless Usb Adapter Wi-fi Dongle 2.4ghz And 5.0ghz Ac600 Plug It Forget It Dual Band Wi-fi Model: Archer T2u Interface: Usb 2.0 Dimensions ( W X D X H )15*7.1*18.6mm Antenna Type: Omni Directional High Speed Wifi – Up To 600mbps Speeds With 200mbps On 2.4ghz And 433 Mbps On 5ghz, Upgrades Your Devices To Higher Ac Wifi Speeds. Dual Band Wireless – 2.4ghz And 5ghz Band For Flexible Connectivity, Upgrades Your Devices To Work With The Latest Dual-band Wifi Router For Faster Speed And Extended Range. Nano Design – Small, Unobtrusive Design Allows You To Plug It In And Forget It Is Even There Operating System – Supports Windows 10/8.1/8/7/xp, Mac Os X Advanced Security – Supports 64/128-bit Wep, Wpa/wpa2, And Wpa-psk/wpa2-psk Encryption Standards Note: 1. All Items With One (1) Year Warranty 2. Bidder Shall Bid For The Entire Lot. Bid For Selected Lot Only Will Be Disqualified. Invitation To Bid For This Project Is Also Posted At Www.cavite.gov.ph

Details: 1) High Performance Liquid Chromatography System Equipped With Binary Mixing Pumping System With Operating Back Pressure Up To 700 Bar, “gradient Delay Volume” Option For Optimizing The Dead Volume Of The Pumping System Itself (tuning From 25µl To 230µl Via Software, Without Mechanical Operator Intervention) And Pump Flow Accuracy Of At Least [input] 0.1%. Equipped With Thermostatted Autosampler (4-40° C), Able To House At Least 200 Vials Of 2 Ml And Column Thermostat Module With Oven Heating Capacity In Both Forced Ventilation And Peltier Mode (selectable Via Software) And Able To Host At Least 2 Columns Of 30 Cm For The Accurate Separation Of Multiple Compounds Present In The Agro-food Matrices. 2) High Resolution Benchtop Mass Spectrometer Based On Quadrupole/detector Technology That Works In Fourier Transform Made Up Of A Precursor Selection Quadrupole, An Orbitrap Type Analyzer/detector And A Collision Cell (ion Routing Multipole) Where It Happens Fragmentation Ms/ms. 3) Resolution Values Up To 240,000 Fwhm, Measured At M/z 200; This Resolution Value Cannot Be Reached By Other Instruments That Do Not Involve The Use Of Magnetic Fields (generated By Superconducting Magnets With The Consequent Use Of Expensive And Demanding Cryogenic Systems) To Identify And Quantify The Molecules With Maximum Confidence. 4) Ability To Work In Polarity Switching: The Instrument Must Operate With Polarity Change Cycles (alternate Complete Scans In Positive Ion And Negative Ion Mode) In A Time Of 0.7 Seconds At Fixed Resolution (60,000 Fwhm). No Technology Other Than Orbitrap Allows Polarity Switching At Such Times, Fixed Resolution, And Without Compromising Sensitivity. 5) A Mass Accuracy Below 1 Ppm, A High Scanning Speed (up To 22 Hz), To Have A Versatile And Exclusive Platform For The Needs Of The Metrofood-it Laboratory Engaged In The Structural Characterization Of Individual Proteins, As Well As In The Analysis Of Post-translational Modifications And Glycoproteins, In The Detection Of Adducts, In The Qualitative And Quantitative Characterization Of Complex Protein Mixtures, In The Profiling Of Foods And At The Same Time Meeting The Needs Of Study And Research In The Field Of "small Molecules", Such As The Challenge Of Identifying An Unknown Substance In A Matrix: Whether It Is Exogenous, Endogenous, Parent Substance Or Metabolite 6) Spectra Acquisition Mode Sim (single Ion Monitoring) And Ms/ms In "multiplexing" Mode, Such That More Ions Precursors (at Least 20) Can Be Collected And Preselected For Detection In High Resolution, Reducing Analytical Cycle Time And Increasing Number Number Of Measurements Within The Chromatographic Peak. 7) Analysis Of Large Molecules Including Intact Proteins And Large Complexes Denatured Or In Native Conditions. Must Include The Ability To Pass (intact) And Analyze Masses Up To M/z 8,000. 8) A Fully Integrated Suite Of Advanced Software Tools For Processing And Interpreting Known And Unknown Data (targeted And Untargeted Approach). Software Must Simplify Compound Identification, Benchmarking, And Provide Extensive Data Filtering And Visualization Capabilities In Workflows. It Must Also Include The Analysis And Characterization Of Native Proteins And Peptide Mapping.

Details: 03/01/2024 please See The Attached Amendment_2 For Solicitation Ppq1118207 the Program Is Requesting A Windows 10 Product That Will Have The Capability To Upgrade To Windows 11 For This Requirement. 02/27/2024 please See Attached Amendment_1 To Sam.gov Rfq# Ppq1118207. sam.gov Sole Special Notice# Pr1118207 Published 2/20/2024 Is Hereby Cancelled. Alternate Products Are Acceptable. usda Aphis Ppq Science And Technology In Edinburg, Tx Would Like To Know What The Cost Would Be For A Service Visit For Annual Calibration. Please Include Any Information/details Regarding Calibration Services (please Complete Page 2 ) interested Parties Please Complete Boxes 8, 15a,b & C And Page 2 Of Amendment_1 Sf30 Form And Return By Solicitation Due Date. lack Of Submission Of Any Or All Documentation Requested May Result In No Further Consideration Of Quote Package. (i) This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. (ii) This Solicitation Number Ppq1118207 Is Being Issued As A, Request For Quotation (rfq) (iii) In Accordance With Federal Acquisition Regulation (far) Clause 52.252-2 Feb 1998)the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular. Applicable Far Clauses Are Incorporated By Reference And May Be Viewed On The Following Website (s) https://www.acquisition.gov/ https://www.acquisition.gov/agar (iv) This Requirement Is Being Issued As A Small Business Set Set-aside In Accordance With Federal Acquisition Regulation (far) 52.219-6. In Accordance With Agricultural Acquisition Regulation ( Agar )452.219-70 Size Standard And Naics Code Information : the North American Industrial Classification System Code(s) And Business Size Standard(s) Describing The Products And/or Services To Be Acquired Under This Solicitation Is Listed Below: naics 334516 Analytical Laboratory Instrument Manufacturing size Standard 1,000 Employees (v) Item Description 1ea Oxford Aztec Eds For The Hitachi Tabletop Sem With Truemap And Accessories Brand Name Or Equal Iaw Far 52.211-6 Brand Name Or Equal. (aug 1999)information Regarding This Product May Be Found At Https://nano.oxinst.com/products/eds/ travel Cost Is Included Within The Service Plan Fee. the Contractor Must Inform The Point Of Contact At Usda/aphis/ppq S & T, On Potential Dates For Installation Or Maintenance. The Poc Will Negotiate The Final Date And Time Of The Visit. The Poc Will Then Inform The Facility Manager At Moore Air Base Located At 22675 N. Moorefield Road, 78539 Edinburg, Texas Of The Upcoming Scheduled Visit. The Facility Manager Will Inform The Security Guards At The Entrance Of The Base Of The Upcoming Visitor And Date Or Dates Of The Visit. The Contractor (visitor) Will Be Advised Prior To The Visit To Bring A Photo Id For Entrance Onto The Facility. At That Time, The Poc Will Be Reached And Will Meet With The Contractor At The Entrance To Building 6414. The Poc Will Escort The Contractor To The Microscopy Lab Located Inside Bldg. 6414, And This Is The Location Of The Hitachi Tabletop Scanning Electron Microscope. (vi) Specifications And Description Of Requirement: pc-sem windows 10 Pc For Tm3030plus 55e-0890 win10 Upgrade For Tm3030plus xplore30tm oxford Aztec Eds For The Hitachi Tabletop Semwith Truemapthe Xplore Compact With Truemap, Ideal For Complicated Spectra With Crowded Overlapping Peaks. The Aztecone System For Tm4000 Series Is The Only System That Is Specifically Designed To Meet The Needs Of The Ttm User. A Simple To Use Interface Combined With The Proven Technology And Reliability Of Oxford Instruments Software Algorithms And Hardware, Mean That Novice And Infrequent Users Can Not Only Get Their Results Quickly And Easily, But They Can Have Confidence That They Are Accurate And Dependable.included Functionality: • Image Acquisition –capability To Acquire Se And Bse Images Sequentially Into The Same ‘site Of Interest’ • Spectrum Acquisition – Collect Data From Point, Rectangular, Elliptical And Irregular Acquisition Areas • Spectra Can Also Be Reconstructed From Existing Smartmap And Linescan Datacubes • Linescanning – Collects A Spectral Line Datacube • Truemap Overlap And Background Corrected Mapping And Linescanning (vii) Shipment Will Be Fob Destination And Inspection And Acceptance Is In Accordance With Far Clause 52.212-4(a) (nov 2023) usda Aphis Ppq Science And Technology 22675 North Moorefield Road edinburg, Tx 78541 please Ship The Pallets Shrink-wrapped. warehouse Receiving Hours: 7:30am-2:45pm Cst Monday Through Friday receiving Dock Is Present But, It Is Not Self-leveling. base Security Services Will Give The Truck Driver Directions To The Main Warehouse Upon Arrival At The Destination. for Invoice Processing And Payment. net 15dys Aro in Accordance With Omb Dated 06/07/2012 Accelerating Payments To Small Businesses For Goods And Services usda Uses The Invoice Processing Platform (ipp) For Electronic Submission And Tracking Of Purchase Orders, Invoices, And Payment Information To Its Suppliers Of Goods And Services: Enroll At Https://ipp.gov. The Ipp Is A Government-wide Secure Web-based Invoice Processing Service Offered Free Of Charge To Government Agencies And Their Suppliers By The U.s. Department Of Treasury’s Financial Management Service (fms). upon Contract Award, You Will Receive A Notification Of Your One-time Enrollment Requirement In An Automatic Invoice Payment Notification System Available Through Ipp. This One-time Enrollment In Ipp Means That You Will Receive A Series Of E-mails From Treasury Services. contractors Must Submit Invoices And Attach All Supporting Documentation As Required Within 5 Business Days Of Completion Of Services Provided. Supporting Documentation Include ,for Example; Maintenance Inspection Checklist, Timecard For Labor, Travel Receipts Etc.. The Cotr Will Review The Supporting Documents Before Approving Invoices In Ipp, If Supporting Documentation Is Not Provided The Invoice Will Be Rejected. Ipp Will Issue A Notification To Contractor That They Must Submit Supporting Documentation And Resubmit The Invoice. please See https://www.ipp.gov/vendors/enrollment-vendors.htm and Submit Invoices Through The Invoice Processing Platform (ipp) Enroll At Https://www.ipp.gov/ Ipp Is A Secure, Web-based System That Manages Government Invoicing. (viii) Provision At 52.212-1, Instructions To Offerors-commercial Products And Commercial Services(nov 2021) Does Not Apply To This Requirement (ix) Evaluation: evaluation Of Quotes Will Be In Accordance With Federal Acquisition Regulation ( Far) 13.106-1 (2) And (far) 13.106-2(b)(3) in Accordance With Federal Acquisition ( Far) 13.106-1 (2) The Government Will Award A Purchase Order Resulting From This Solicitation To The Responsible Quote Conforming To The Solicitation That Will Be The “best Value” And Most Advantageous To The Government. In Accordance With Far 13.106-2 (b)(3); Product Offered, Price, And Delivery Are The Factors To Be Considered. brand Name Justification: in Accordance With Far 13.106-1(b)(1)(i) And Far 13.106-3(b)(3)(i). )for Acquisitions Greater Than The Micro-purchase Threshold But Less Than The Simplified Acquisition Threshold (sat) The Contracting Officer May Solicit From One Source Only If The Contracting Officer Determines That The Circumstances Of The Contract Action Deem Only One Source Reasonably Available (e.g., Urgency, Exclusive Licensing Agreements, Brand Name, Etc.). usda Aphis Ppq Science And Technology Already Owns A Tabletop Sem. They Wish To Purchase An Accessory For Use With The Hitachi Tabletop Sem. The Add-on Accessory They Want To Purchase Is The Oxford Aztec Energy Dispersive Spectrometer (eds) With Trumap. any Pursuit Of Comparable Products At This Time Would Result In Substantial Duplication Of Cost To The Government Due To Non Compatibility Of Components And Methods Currently In Use. far Clause 52.225-1, Buy American-supplies (oct 2022) And Far Provision 52.225-2 Buy American Certificate. (oct 2022) Apply To This Purchase. pricing: the Government Will Evaluate Quote Prices In Accordance With The Policies And Procedures Of Part 25.105 Of The Federal Acquisition Regulation. Determination Of Cost Reasonableness Will Be In Accordance With Federal Acquisition Regulation 25.106 (b)(1) (x) Provision At 52.212-3 Representations And Certifications—commercial Items (nov 2023) Applies To This Solicitation And Is To Be Completed Online At Www.sam.gov (xi) The Clause At 52.212-4 Contract Terms And Conditions—commercial Items (nov 2023), Applies To This Acquisition. (xii) The Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Items (dec 2023), Applies To This Acquisition. (a)the Contractorshallcomply With The Following Federalacquisitionregulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: (1)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements(jan 2017)(section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kasperskylab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (3)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (4)52.209-10, Prohibition Oncontractingwith Inverted Domestic Corporations(nov 2015). (5)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023)(31 U.s.c. 3903and10 U.s.c. 3801). (6)52.233-3, Protest After Award(aug 1996)(31u.s.c.3553). (7)52.233-4, Applicable Law For Breach Of Contractclaim(oct 2004)(public Laws 108-77 And 108-78 (19u.s.c.3805note)). (b)the Contractorshallcomply With The Far Clauses In This Paragraph (b) That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] __(1)52.203-6, Restrictions On Subcontractor Sales To The Government(jun 2020),withalternatei(nov 2021)(41u.s.c.4704and10 U.s.c. 4655). __(2)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509)). __(3)52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009(jun 2010)(section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) __(4)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712); This Clause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of The Intelligence Community—see Far3.900(a). x(5)52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards(jun 2020)(pub. L. 109-282) (31u.s.c.6101note). __(6)[reserved]. __(7)52.204-14, Service Contract Reporting Requirements(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(8)52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(9)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (10)52.204–28, Federalacquisitionsupply Chain Security Act Orders—federal Supply Schedules, Governmentwideacquisitioncontracts, And Multi-agency Contracts.(dec 2023)(pub. L. 115–390, Title Ii). __(11)(i)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). __(ii)alternatei(dec 2023)of 52.204–30. x(12)52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed Fordebarment.(nov 2021)(31u.s.c.6101note). __(13)52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters(oct 2018)(41u.s.c.2313). __(14)[reserved]. __(15)52.219-3, Notice Ofhubzoneset-aside Or Sole-source Award (oct 2022) (15u.s.c.657a). __(16)52.219-4, Notice Of Price Evaluation Preference Forhubzonesmall Business Concerns (oct 2022) (if Theofferorelects To Waive The Preference, Itshallso Indicate In Itsoffer) (15u.s.c.657a). __(17)[reserved] x(18)(i)52.219-6, Notice Of Total Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-6. __(19)(i)52.219-7, Notice Of Partial Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-7. (20)52.219-8, Utilization Of Small Business Concerns (sep 2023) (15u.s.c.637(d)(2)and (3)). __(21)(i)52.219-9, Small Business Subcontracting Plan (sep 2023) (15u.s.c.637(d)(4)). __(ii)alternatei(nov 2016)of52.219-9. __(iii)alternateii(nov 2016)of52.219-9. __(iv)alternateiii(jun 2020)of52.219-9. __(v)alternateiv (sep 2023) Of52.219-9. __(22)(i)52.219-13, Notice Of Set-aside Of Orders(mar 2020)(15u.s.c.644(r)). __(ii)alternatei(mar 2020)of52.219-13. __(23)52.219-14, Limitations On Subcontracting (oct 2022) (15u.s.c.637s). __(24)52.219-16, Liquidated Damages—subcontracting Plan(sep 2021)(15u.s.c.637(d)(4)(f)(i)). __(25)52.219-27, Notice Of Service-disabled Veteran-owned Small Business Set-aside (oct 2022) (15u.s.c.657f). x(26)(i)52.219-28, Post Award Small Business Program Rerepresentation (sep 2023)(15u.s.c.632(a)(2)). __(ii)alternatei(mar 2020)of52.219-28. __(27)52.219-29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantagedwomen-owned Small Business Concerns(oct 2022) (15u.s.c.637(m)). __(28)52.219-30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15u.s.c.637(m)). __(29)52.219-32, Orders Issued Directly Under Small Business Reserves(mar 2020)(15u.s.c.644(r)). __(30)52.219-33, Nonmanufacturer Rule(sep 2021)(15u.s.c. 637(a)(17)). x(31)52.222-3, Convict Labor(jun 2003)(e.o.11755). x(32)52.222-19, Child Labor-cooperation With Authorities And Remedies(nov 2023). x(33)52.222-21, Prohibition Of Segregated Facilities(apr 2015). x(34)(i)52.222-26, Equal Opportunity(sep 2016)(e.o.11246). __(ii)alternatei(feb 1999)of52.222-26. (35)(i)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). __(ii)alternatei(jul 2014)of52.222-35. x(36)(i)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). __(ii)alternatei(jul 2014)of52.222-36. (37)52.222-37, Employment Reports On Veterans (jun 2020) (38u.s.c.4212). __(38)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). x(39)(i)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o. 13627). __(ii)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78and E.o. 13627). __(40)52.222-54, Employment Eligibility Verification(may2022)(executive Order 12989). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items Or Certain Other Types Ofcommercial Productsorcommercial Servicesas Prescribed In Far22.1803.) __(41)(i)52.223-9, Estimate Of Percentage Ofrecovered Materialcontent For Epa–designated Items (may2008) (42u.s.c.6962(c)(3)(a)(ii)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(ii)alternatei(may2008)of52.223-9(42u.s.c.6962(i)(2)(c)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(42)52.223-11,ozone-depleting Substancesandhigh Global Warming Potential Hydrofluorocarbons(jun 2016) (e.o. 13693). __(43)52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners(jun 2016)(e.o. 13693). __(44)(i)52.223-13,acquisitionof Epeat®-registered Imaging Equipment(jun 2014)(e.o.s 13423 And 13514). __(ii)alternatei(oct 2015)of52.223-13. __(45)(i)52.223-14,acquisitionof Epeat®-registered Televisions(jun 2014)(e.o.s 13423 And 13514). __(ii)alternatei (jun2014) Of52.223-14. __(46)52.223-15, Energy Efficiency In Energy-consumingproducts(may2020)(42u.s.c.8259b). __(47)(i)52.223-16,acquisitionof Epeat®-registered Personal Computerproducts(oct 2015)(e.o.s 13423 And 13514). __(ii)alternatei(jun 2014)of52.223-16. x(48)52.223-18, Encouraging Contractor Policies To Ban Text Messaging While Driving(jun 2020)(e.o. 13513). __(49)52.223-20, Aerosols(jun 2016)(e.o. 13693). __(50)52.223-21, Foams (jun2016) (e.o. 13693). __(51)(i)52.224-3privacy Training(jan 2017)(5 U.s.c. 552 A). __(ii)alternatei(jan 2017)of52.224-3. x(52)(i)52.225-1, Buy American-supplies(oct 2022)(41u.s.c.chapter83). __(ii)alternatei(oct 2022)of52.225-1. __(53)(i)52.225-3, Buy American-free Trade Agreements-israeli Trade Act(nov 2023)(19 U.s.c. 3301 Note,19 U.s.c. 2112 Note,19 U.s.c. 3805 Note,19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. __(ii)alternatei [reserved]. __(iii)alternateii(dec2022)of52.225-3. __(iv)alternateiii(nov 2023)of52.225-3. __(v)alternateiv (oct 2022) Of52.225-3. (54)52.225-5, Trade Agreements(nov 2023)(19u.s.c.2501,et Seq.,19u.s.c.3301note). x(55)52.225-13, Restrictions On Certain Foreign Purchases(feb 2021)(e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). __(56)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016) (section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). __(57)52.226-4, Notice Of Disaster Oremergencyarea Set-aside (nov 2007) (42u.s.c.5150). __(58)52.226-5, Restrictions On Subcontracting Outside Disaster Oremergencyarea (nov2007) (42u.s.c.5150). __(59)52.229-12, Tax On Certain Foreignprocurements(feb 2021). __(60)52.232-29, Terms For Financing Of Purchases Ofcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). (61)52.232-30, Installment Payments Forcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). x(62)52.232-33, Payment Byelectronic Funds Transfer-system For Award Management(oct2018)(31u.s.c.3332). (63)52.232-34, Payment Byelectronic Funds Transfer-other Thansystem For Award Management(jul 2013) (31u.s.c.3332). (64)52.232-36, Payment By Third Party(may2014)(31u.s.c.3332). __(65)52.239-1, Privacy Or Security Safeguards(aug 1996)(5u.s.c.552a). __(66)52.242-5, Payments Tosmall Business Subcontractors(jan 2017)(15u.s.c.637(d)(13)). __(67)(i)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). __(ii)alternatei(apr 2003)of52.247-64. __(iii)alternateii(nov 2021)of52.247-64. (c)the Contractorshallcomply With The Far Clauses In This Paragraph (c), Applicable Tocommercial Services, That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] (1)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (2)52.222-42, Statement Of Equivalent Rates For Federal Hires(may2014)(29u.s.c.206and41u.s.c.chapter67). (3)52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year Andoptioncontracts)(aug 2018)(29u.s.c.206and41u.s.c.chapter67). (4)52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may2014) (29u.s.c.206and41u.s.c.chapter67). __(5)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). __(6)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (7)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (8)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). __(9)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42u.s.c.1792). (d)comptroller General Examination Of Record. The Contractorshallcomply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of Thesimplified Acquisition Threshold, As Defined In Far2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At52.215-2, Audit And Records-negotiation. (1)the Comptroller General Of Theunited States, Or An Authorized Representative Of The Comptroller General,shallhave Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract. (2)the Contractorshallmake Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminatedshallbe Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Ofclaimsarising Under Or Relating To This Contractshallbe Made Available Until Such Appeals, Litigation, Orclaimsare Finally Resolved. (3)as Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e) (1)notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1), In A Subcontract Forcommercial Productsor Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Downshallbe As Required By The Clause- (i)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509). (ii)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712). (iii)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iv)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kasperskylab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (v)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (vi)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (vii)(a)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). (b)alternatei(dec 2023)of 52.204–30. (viii)52.219-8, Utilization Of Small Business Concerns (sep 2023) (15u.s.c.637(d)(2)and (3)), In All Subcontracts Thatofferfurther Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far19.702(a) On The Date Of Subcontract Award, The Subcontractormustinclude52.219-8in Lower Tier Subcontracts Thatoffersubcontracting Opportunities. (ix)52.222-21, Prohibition Of Segregated Facilities(apr 2015). (x)52.222-26, Equal Opportunity(sep 2015)(e.o.11246). (xi)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). (xii)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). (xiii)52.222-37, Employment Reports On Veterans(jun 2020)(38u.s.c.4212). (xiv)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause52.222-40. (xv)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (xvi)(a)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o 13627). (b)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78ande.o.13627). (xvii)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). (xviii)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (xix)52.222-54, Employment Eligibility Verification(may2022)(e.o. 12989). (xx)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (xxi)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). (xxii)(a)52.224-3, Privacy Training (jan 2017) (5u.s.c.552a). (b)alternatei(jan 2017)of52.224-3. (xxiii)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016)(section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxiv)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations(jun 2020)(42u.s.c.1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause52.226-6. (xxv)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023) (31 U.s.c. 3903and10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of52.232-40. (xxvi)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause52.247-64. (2)while Not Required, The Contractormayinclude In Its Subcontracts Forcommercial Productsandcommercial Servicesa Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. (end Of Clause) the Following Clauses And Provisions Also Apply To This Acquisition 52.252-2 Clauses Incorporated By Reference. (feb 1998) 52.204-13, System For Award Management Maintenance (oct 2018) 2.204-18 Commercial And Government Entity Code Maintenance. (aug 2020) 52.204-21 Basic Safeguarding Of Covered Contractor Information Systems. (nov 2021) 52.212-4 Contract Terms And Conditions—commercial Items. (nov 2023) 52.232-40 Providing Accelerated Payments To Small Business Subcontractors. (mar 2023) 52.204–28 - Federal Acquisition Supply Chain Security Act Orders—federal Supply Schedules, Governmentwide Acquisition Contracts, And Multi-agency Contracts. (dec 2023) 52.204–30 - Federal Acquisition Supply Chain Security Act Orders—prohibition. (dec 2023) 452.204-70 Modification For Contract Closeout. (july 2022) 52.252-1 Solicitation Provisions Incorporated By Reference. (feb 1998) 52.204-7 System For Award Management(oct 2018) 52.204-16 Commercial And Government Entity Code Reporting. (aug 2020) 52.204–29 Federal Acquisition Supply Chain Security Act Orders—representation And Disclosures. (dec 2023) 52.211-6 Brand Name Or Equal. (aug 1999) 52.212-3 Offeror Representations And Certifications—commercial Products And Commercial Services. (nov 2023) 52.225-2 Buy American Certificate. (oct 2022) (xiii) Additional Contract Requirements Or Warranty warranty implied Warranty - The Government’s Post Award Rights Contained In 52.212-4 Are The Implied Warranty Of Merchantability, The Implied Warranty Of Fitness For Particular Purpose And The Remedies Contained In The Acceptance Paragraph. additional Warranty - : Explain All Details Of The Warranty. If An Extended Warranty Is Available Explain Details Of Extended Warranty Including Price And Availability After Initial Warranty Expires. The Quoter Shall Extend To The Government The Full Coverage Of Any Standard Commercial Warranty Normally Quoted In A Similar Commercial Sale, Provided Such Warranty Is Available At No Additional Cost To The Government. Acceptance Of The Standard Commercial Warranty Does Not Waive The Government's Rights Under The Inspection Clause Nor Does It Limit The Government's Right With Regard To The Other Terms And Conditions Of This Contract. In The Event Of A Conflict, The Terms And Conditions Of The Contract Shall Take Precedence Over The Standard Commercial Warranty. The Contractor Shall Provide A Copy Of Its Standard Commercial Warranty (if Applicable) With This Response. (xiv) There Is No Defense Priority Allocation For This Requirement. (xv) The Date, Time And Place Quotes Are Due: interested Vendors Please Email (only) This Attachment 1 By 4pm (mt) 03/08/2024 To: Email: Carol.dingess@usda.gov Please Include Rfq# Ppq1118207on Subject Line questions Via Email Only - Are Due Nlt 8:am (mt) 03/01/2024 (xvi) The Name And Contact Info Of The Individual To Contact For Information Regarding This Rfq Is The Same As Item (xv)

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 19 Of 19 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 19 1. This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Items, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. 2. This Is A Request For Quote (rfq) And The Solicitation Number Is 36c26024q0552. The Government Anticipates Awarding A Firm-fixed Price Fss Delivery Order Contract Resulting From This Solicitation. 3. This Is A Solicitation For The Lease Of Brand Name Or Equal Two (2) Rapidpointâ® 500e Blood Gas Systems And Associated Reagents (period Of Performance Base+4 Option Years: 5/22/2024 4/30/2029). the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-05 Effective April 22, 2024. 4. This Solicitation Is A Service-disabled Veteran-owned Small Business Set-aside. The Associated North American Industrial Classification System (naics) Code For This Procurement Is 334516, With A Small Business Size Standard Of 1,000 Employees And The Psc Is W065. the Sba Non-manufacturer Rule Is Not Applicable As A Class Waiver Exists Under Naics Code 334516 -analytical Laboratory Instrument Manufacturing Under Which This Requirement Will Be Procured. all Interested Companies Shall Provide Quotations, Including Pricing, As A Part Of This Solicitation. All Information Of This Nature Submitted To The Government Shall Be Made In Accordance With The Brand Name Or Equal Salient Characteristics And Statement Of Work Below. Responsive Quotes Shall Include A Price Quote, Past Relevant Performance, And Item/task Technical Specifications Outlining How They Intend To Meet The Standards Provided In Both Section (6) Salient Characteristics And Section (7) Statement Of Work . 5. Price/cost Schedule: the Department Of Veterans Affairs, Puget Sound Va Heath Care System (vahcs), Nco20 Is Looking For A Lease Of Brand Name Or Equal Sources Of The Following: base Year + 4 Option Years (the Below Is A Template To Be Used Per Year) base Year: 5/22/2024 4/30/2025 o Option 1: 5/1/2025 4/30/2026 o Option 2: 5/1/2026 4/30/2027 o Option 3: 5/1/2027 4/30/2028 o Option 4: 5/1/2028 4/30/2029 item (per Year) quantity dollar Amount (per Item) total rp500e Blood Gas Analyzer 2 ups Standard 120v 2 warranty Service Rapidpoint 500e Plus 2 Years 2 extended Service Rapidpoint 500e Plus 3 Years 2 mcart Lac 250 Test 1 mcart Lac 400 Test 1 mcart Lac 750 Test 24 grand Total 6. Salient Characteristics: the Chemistry Department Of Puget Sound Health Care Systems Requires A Minimum Of Two (2) New Blood Gas Analyzers At This Time For Lease That Provide The Following Attributes: the Blood Gas Platform Selected Is A Comprehensive, Whole Blood Critical Care Analyzer That Combines Blood Gases, Electrolytes, Metabolites, Co-oximetry, And Calculated Results In A Simple, Compact Device. the Platform Combines Maintenance-free, Replaceable Cartridge Technology For Sensors And Reagents the Analyzer Uses Non-lysing Whole Blood Co-oximetry Technology. the Analyzer Must Produce Very Rapid And Complete Testing Within One Minute. the Analyzer Will Provide Bidirectional Connectivity And An Onboard Data Management System. the Platform Menu Must Include, But Not Limited To, The Following: ph pco2 tco2 po2 hct na+ k+ cl- ca++ mg++ glucose lactate hhb o2hb methb cohb so2 o2 tbil hbf thb barp the Platform Will Have A Mechanism To Prevent Clots From Entering The Sample Path. the Platform Will Use Liquid Qc To Meet Clia Guidelines Samples Can Be Aspirated Directly From The Syringe Proficiency Samples Will Not Require Adaptors Foot Print Of Analyzer Will Not Exceed 14.2 Inches Wide, 15.5 Inches Deep, And 18.2 Inches Tall To Meet Laboratory Countertop Restrictions. The Platform Will Have An Onboard Thermal Printer And A Back Up Battery Source. The Platform Will Have The Capacity To Provide The Following Reports: - Calibration Report - Cartridge Log Report - Daily Sample Log Report - Edit Log Report - Error Log Report - Maintenance Log Report - Operator Setup Report - Patient Report - Levey-jennings Qc Report - Qc Corrective Actions Report - Qc Data Report - Qc Statistics Report - Qc Setup Report - Sample Audit Log Report 7. Statement Of Work scope Of Work va Puget Sound Health Care System Is In Need Of Leasing A Minimum Of Two (2) Whole Blood/arterial Blood Gas/critical Care Metabolites Analytical Instrument Systems At This Time To Conduct A Variety Of Tests On Our Patient Population. These Analyzers And Supplies Must Be Provided To Both Seattle And/or American Lake And/or Any Vapshcs Campuses Per The Estimate Given In The Statement Of Work. There May Be The Need For An Additional Rental Unit To Be Added At A Later Date, Per The Needs Of The Puget Sound Vahcs. the Purpose Of This Statement Of Work (sow) Is For The Government To Obtain The Greatest Overall Benefit In Response To The Requirements. i 1.0 Requirements/services To Be Provided: general Requirement the Vendor Shall Furnish All Clinical Laboratory Supplies And Services As Described Herein To The Participating Vamc Facility In Accordance With The Applicable Federal Supply Schedule Contract. Attachment 1 (test Volumes) Can Be Utilized By Interested Contractors To Submit Their Cost Proposal. a Listing Of The Estimated Yearly Quantity Is Provided Under This Agreement Located In Attachment 1 (test Volume). Quantities Listed In The Attachment To This Rfq Are Estimates Based Upon Prior History Of Actual Volumes And Are Intended To Provide The Potential Contractor A Basis For Calculating Their Pricing. They Are Not A Guaranteed Minimum. the Pricing Shall Be Based On New Equipment. Remanufactured Or Used Models Will Not Be Accepted. The Vendors Offered Blood Gas Analyzer/system(s) Must Conform To The Facility S Existing Space. The Dimensions Of This Space Are 7 X 2.5 In Seattle And 16 X 24 In American Lake. the Analyzer/equipment Must Meet The Test Volume In Attachment 1 And Match Or Improve The Turnaround Time Requirements. The System Should Streamline All Aspects Of Testing, Thereby Improving Efficiency And Productivity Of The Using Facility. the Vendor Shall Provide The Facility With Food And Drug Administration (fda) Approved Analyzer/equipment, Reagents, Controls, Calibrators, Linearity Material, Disposables, Any Consumable Part Necessary For Analyzing/testing On The Analyzer. Vendor Shall List The Consumable Parts Provided. Vendor Shall State Any Parameter/function That Is Pending Fda Approval At The Time Of The Submission. b. System Requirements: the Desired Blood Gas/critical Care Metabolite Instrumentation Must Have The Capability Of Performing And/or Reporting The Following Parameters On Arterial, Venous, Or Mixed Venous Whole Blood Specimens: ph po2 pco2 hemoglobin hematocrit sodium potassium chloride ionized Calcium glucose lactic Acid base Excess bicarbonate total Carbon Dioxide (tco2) oxygen Saturation co-oximetry (or Similar Technology To Fractionate Hemoglobin Species) in Addition, The Analyses Must Take Place On A Single Instrument And A Single Specimen. The Instrument Shall Be Able To Perform The Complete Profile Described Above Discretely By Either Direct Or Indirect (calculated) Measurement And Meet The Performance Characteristics For Accuracy And Precision As Defined By The 1988 Clinical Laboratory Improvement Act (clia) And The National Committee For Clinical Laboratory Standards (nccls). the System Must Have Standardization Of Software, Hardware, Reagents, And Consumables Between The Primary And Back-up Analyzers Throughout The Facility (mirror Image Redundancy). the Vendor Shall Provide The Facility, For The Duration Of The Contract, With All Reagents, Controls (both Blood Gas, Chemistry, And Co-oximetry), Calibrators, Disposables, Any Consumable Part (inclusive Of Replacement Parts Per Manufacturers Maintenance Guidelines, Aspiration Devices, Etc.), Necessary For Analyzing/testing On Both The Primary And Back-up Analyzers To Produce A Patient Result. All Linearity Material And Any Commercial System Correlation Samples Needed May Be Provided To Meet Cap Requirements. vendor Must Provide A Printer And All Thermal Paper For Generating Paper Copy Of Results, And Provide A Replacement Printer As Needed. vendor Shall Specify Calibration Frequency Of One Point, Two Point, And System Calibrations In Accordance With Regulatory Requirements. The System Must Alert The Operator Of A Calibration Drift. vendor Must Provide On-board Commercial Quality Control For Every Twenty-four Hours Of Operation To Include: Three Levels For Blood Gases, At Least Two Levels For Chemistry, And Three Levels For Co-oximetry To Be Analyzed On Each Analyzer At The Facility. the System Must Have A Sampling System That Can Aspirate Directly From A Syringe Or An Evacuated Blood Collection Tube And Can Accommodate Any Sample Type Without Any Additional Adapter Devices. The Sampling System Must Have The Capability Of Walk Away Processing That Negates The Need For Additional Instrument Prompting. The Vendor Must Also State The Sample Size Required For Patient Testing. the Sampling System Must Immediately Alert The Operator That A Sample Is Not Positioned Properly, There Is Insufficient Sample Quantity, And Have Early Clot Detection That Alerts The Operator To The Suspected Existence Of A Fibrin Clot In The Specimen. The Vendor Must Define The Methodology For Clot Detection. the System Must Have Ready To Use Reagents That Have On Board Stability Greater Than Or Equal To 30 Days. Vendor Shall List All Reagents Needed For Blood Gas/chemistry/co-oximetry Analysis, The Format/size Of The Reagents, And If The Supplies Are Stored At Room Temperature Or Refrigerated. Vendor May State If Reagents And Controls Are Color-coded. Packaging Should Be Maximized To Accommodate The Specimen Volume At The Facility And Not Require A Frequent Exchange Of Inventory On The Equipment. the System May Provide Reagent Inventory, In Real Time That Can Be Printed At Selected Time Intervals For Reagent Documentation. the System Must Be Programmed To Perform And Execute Auto Quality Control Without Operator Intervention. Perform Automatic Corrective Action On The System If The Results Of The Quality Control Testing Are Not Acceptable And Have The Ability To Lock Out/suppress A Test If There Are Qc Failures. the Vendor Is To Define The Actual Hands-on Maintenance Time Required For Daily, Weekly, Monthly, And As Needed Maintenance. The Vendor Is To Include The Analyzer Time Required To Perform Each Maintenance Task. Vendor Must List Which Tasks Are User Level And Which Tasks Are Service Level. Systems That Use Electrodes Must Have Minimal Maintenance, Electrode Replacement Must Be Accomplished Easily, And The New Electrode Must Be Operational Within Two Hours Of Replacement. The Analyzer May Have On-board Integrated Maintenance And Trouble-shooting Procedures. the Vendor Must Provide A Comprehensive Qc Program, Provide Qc For All Tests Listed In Attachment 1 And Must Provide The Following Options: qc Files May Be Edited Or Corrected For Errors Manually With/without Password protection have On-board Quality Control Data Storage (for At Least 90 Days) And Reporting capabilities ability To View/print Daily, Monthly Qc Results And Levy-jennings Graphs. ability To Visually Alert The Operator Of Qc (westgard/user Defined Rules) Failures. electronic Transfer Of Qc Data To Vendor Without The Need For Manual Entry automatic Enrollment In A Quality Assurance Program That Has Peer Participation Of At Least 50 Participants That Are Not Part Of Visn 20 Network. Reports Of Peer Data Will Be Current And Available Within 2-4 Weeks Of The Data Submission For Hard Copy Review. the Vendor Must Supply Equipment That Performs Satisfactorily At Any Laboratory Relative Humidity Between 15 To 85 Percent And Any Laboratory Temperature Between 50 To 100 Degrees Fahrenheit. instrumentation And Software: the Vendor Is To Complete With Their Proposal The Medical Equipment Pre-procurement Assessment (va Directive 6550 Appendix A) For The Office Of Information Technology (oi & T) For The Facility For Any Medical Devices That Will Be Connected To The Va Information Network. The Vendor Will Provide Evidence Of Va Approved Remote Network Communication System That Continuously Collects And Monitors Performance Data Of The Analytical Systems Following All The Policies And Procedures Outlined In The Va Directive 6500, Information Security Program, And Its Handbooks To Ensure Appropriate Security Controls Are In Place (see Appendix A In Section D). the System May Have The Ability To Manage Patient Information Through A Data Manager. Including The Acceptance Of Test Ordering Information, Transmittal Of Patient Laboratory Patient Results, Storage And Retrieval Of Patient Laboratory Results. Retrieval Of Patient Or Instrument Data Must Be In A Microsoft Windows Compatible Format. the Equipment Shall Include 120-volt Ups That Has A 2 3-hour Back-up Capability For All Analyzers. The Vendor Will Be Responsible For Replacing The Ups Should It Become Dysfunctional And Provide Battery Replacement As Needed. the System Will Support Multiple Barcode Formats Including But Not Limited To Code 39, Code 128 And Coda Bar That May Be Enabled Concurrently. the System Must Accept At A Minimum, A 10-character Specimen Identifier That Is Alphanumeric (letters And Numbers). the Vendor Must Provide The Following Interfacing Requirements: instrument Lis Physical Connection And Translation (drivers) routing Must Be Fully Supported By All Laboratory Instrument Interface Partners, Especially Data Innovations, Inc. any Additional Hardware And Software Needed To Interface The Analyzer And Technical Assistance With Interfacing The Analyzer. any Required (additional) Interface Connection License(s) instrument-lis Interface Must Be Bi-directional. provide Documentation Of Successful Interfacing With Other Va Facilities (provide Two Vamc References) interface Must Use Automatic Host Query To Download Sample Ids, Test Requests, And Patient Demographics. automatic Host Query Must Seamlessly Integrate With Onboard Patient Sample Barcode Scanning And Translation. instrument Interface Must Transmit Test Results To The Host Computer System Via Automatic Upload. the System Shall Have Computer Capabilities That Are Compatible With Customer Lis Software, Provide Cd-rom/dvd Player, Minimum 17-inch Flat Screen Panel Lcd Display Monitor With Built-in Speakers, Optical Mouse, And Laser Jet Printer. the Blood Gas Instrumentation Must Have A Printer That Has The Capability Of Printing A Patient Report With Patient Demographic Information That Includes Minimally The Patient S Name, Social Security Number, Order Number, And Phlebotomy Site. Vendor May List Programmable Options For Patient Demographic Report. the System Shall Have An Automatic Back-up Function To Store All Data From The Hard Drive. Vendor Must Describe The Back-up Option In Submitted Proposal. Would Prefer If Data Back-up Was Exportable By Usb Flash Or Cd-dvd Drive And In A Microsoft Windows Compatible Format. the System Must Be Able To Store And Retransmit Records (24 Hours Of Maximum Instrument Throughput) In Case Of Interface Downtime. The System May Have The Ability To Edit Sample/patient Identifier After Interface Downtime And Then Be Able To Resend The Sample/patient Information To The Host For Verification. the Vendor Must Provide All Upgrades To The Equipment Hardware, Software, And Operating Systems Without Additional Charge To The Government (e.g., Upgrades That Correct Either A Mechanical Or Software Deficiency Of The System). These Enhancements To The Vendor S Equipment Shall Be Delivered And Installed At The Site Within Two Months Of Their Issuance Or Date Of First Commercial Availability. The Vendor Will Always Maintain Compatibility Of Systems With Whatever Host Lis Is In Place, Especially When Vendor Software Is Upgraded. the Vendor Must Remove All Equipment Within 90 Days Of The Expiration Of The Terms Of This Bpa But Not Until The Completion Of The New Vendor S Equipment Installation Inclusive Of Completed Cross Over Studies. The Facility, Per Their Protocol, Will Be Responsible For The Removal/erasing Of The Hard Drive At Analyzer Removal/upgrade. installation: the Vendor Shall List Analyzer/utility Requirements (electrical, Water, Plumbing, Reagent And Bio-hazardous Disposal, Temperature, Humidity, Etc.). The Vendor Shall Provide Weight And Dimensions Of Proposed Analyzers. the Vendor Must Indicate Any Routine And /or Special Items Required To Operate/maintain The Equipment/analyzer In Optimal Condition Such As But Not Limited To: Paper, Printer Cartridges, Drainage Systems, Surge Suppressors, Etc. Any Items Excluded By The Vendor Shall Be Delineated In Their Proposal. The Cost Of The Excluded Items Must Be Incorporated In The Price Proposal. the Vendor Shall Provide The Facility With All Reagents, Calibrators, Control, And Any Cross-over Supplies Needed At Installation And During Training Of Staff. The Vendor Must Pay All Shipping Costs For The Analyzers And All Supplies Needed For The Installation, Correlation Studies And Training Of Staff. Test Counts For Billing Will Begin After All Cap Required Studies, Performed At Installation Of New Equipment, Are Reviewed And Approved. at Installation/set-up The Vendor/technical Support Specialist Shall Perform All Validation Studies Including Installation/set-up, Correlation Studies (evaluation/comparison Data Sufficient To Satisfy Cap Standards), Reference Range Studies, Staff Training, In-services To Laboratory Personnel And Clinicians, And Assist With Any Methodology Problems And Questions. The Service Must Be Available During Regular Office Hours On A 5 Days/week Basis. the Vendor Must Provide Equipment Installation And Possible Reinstallation Costs If The Equipment Is Required To Be Moved Due To Construction Or Laboratory Redesign. the Vendor Will Work With The Facility To Adjust Reagent Supply To Match Workload Changes And To Provide The Option Annually For The Facility To Adjust The Shipment Table. The Vendor Shall State What Their Policy Is In Regard To Adjusting A Standing Order Or Ordering An Additional Shipment Of Supplies. training/procedures: the Vendor Shall Provide All Necessary Procedure Manuals, Troubleshooting Manuals, Operator Manuals, Technical Manuals For Computer Interfacing, Msdss, Etc. (also Available On Computer Disc). Procedures Must Be In The Clinical And Laboratory Standards Institute (clsi) Format. the Vendor Must Provide Primary User Training For A Minimum Of Two Users Per Instrument With On-site Training Available To The Remaining Users On All Tours (or Shifts) With Competency Assessment Performed And Documented. Primary User Training Is To Include All Costs Of Off-site Training, I.e., Transportation (air And Ground), Room And Board, Etc. support Services: the Vendor Must Provide A Preventative Maintenance Schedule To Include A Minimum Of Two Scheduled Preventative Visits Per Year For The Duration Of The Contract. the Vendor Shall Replace Any Analyzer/equipment That Is Provided During The Terms Of This Bpa That Has Not Been Repaired To The Workable Satisfaction Of The Facility. Should The Repair Record Of Any Individual Analyzer/equipment Reflect A Downtime Of 5% Or Greater Of The Normal Working Days In One Calendar Month, A Determination Will Be Made By The Designated Representative Of The Using Facility/clinic To Replace The Initial Laboratory Analyzer/equipment With New Analyzer/equipment. Each Analyzer/equipment Provided By The Vendor Shall Maintain An Uptime Of 95% In Each Month During The Terms Of The Agreement. the Vendor Shall Provide Instrument Support Service Sufficient To Aid With Troubleshooting And Repair Of The Analyzers. The Vendor May List Their Service Options Available. Or The Following Service Options May Be Available: 24 Hours/day, 7 Days/week Or From 08:00 17:00, 7 Days/week. For Any Site That May Encounter The Rare Occasion When Both Analyzers Are Inoperable (service Has Now Escalated To Emergency Status), Service Shall Immediately Dispatch A Field Service Engineer For Repair. Vendor Is To Explain Their Policy In Relation To Service If The Occasion Should Occur When All Analyzers Are Inoperable. The Support Service Must Follow-up All Down Calls Within 1 Hour. The Fsr Will Always Keep The Facility Informed Of The Timeline For When Repairs Are To Be Completed. All Repairs On Instrument Must Be Completed (at No Cost To The Facility/clinic) Within 24 Hours From The Time The Field Service Engineer Arrives. the Vendor Will Provide Twenty-four Hour/seven-day Service Hotline With Technical Support. All Calls Will Be Answered Within One Hour Via Telephone. service Is To Include All Travel, Parts For Repair Or Replacement, And Labor. the Vendor Will Pay All Routine Shipping Fees For Supplies, Consumables, And Equipment To Perform Testing At Initial Installation And With Routine Supply Delivery. if All Instruments Are Inoperable: The Vendor Shall Pay For The Laboratory Testing At A Reference Facility If The Equipment Requiring Repair Is Inoperative Due To Malfunction Through No Fault Or Negligence Of The Facility For A Total Of More Than 24 Hours. The Cost Incurred From The Reference Facility Testing, Packaging And Shipping Will Be Applied To The Invoice In The Form Of A Credit Or Deduction. Downtime For Each Incident Will Start From The Time The Facility Makes A Bona Fide Attempt To Contact The Vendor S Designated Representative Until The Analyzer Is Returned To Good Operating Order. if The Consumables Are Found To Be Defective And Unsuitable For Use With The Vendor S Equipment, Or The Vendor Has Failed To Comply With The Requirements For Routine Supply Delivery, The Vendor Shall Deliver The Consumable Supplies Within A Period Of 24 Hours After Receipt Of The Verbal Order For Priority Delivery From The Facility/clinic. If Either Circumstance Has Occurred, The Vendor Will Deliver To The Facility, In The Most Expeditious Manner Possible, Without Additional Costs To The Facility, The Necessary Consumable In Sufficient Quantity Until The Arrival Of The Standing Order/routine Supplies Delivery. the Vendor Must Provide Replacement Parts And Any Components Necessary For The Operation Of The Instrument(s) To Produce Patient Results. past Performance/technical Excellence: Availability Of Four (4) References (two Va And Two From The Private Sector) Which Can Validate Past Experience Within The Last Three (3) Years Regarding: a. Quality Of Service (to Include Timeliness Of Service, Documentation And Communication Of Work/repair At Time Of Service, Does Service Repair/fix The Problem On The First Site Visit Or Does Service Have To Return To Repair/fix The Problem Again, Are Parts/tools Available When Service Is Performed Or Is Service Delayed Due To Ordering Replacement Parts), And Technical Support Including Method Validation. ability Of Vendor To Supply Accurate Data For Annual Contract Renewal By Required Time Frames And Timeliness Of Billing Reconciliation. customer Satisfaction: Meets Or Exceeds Turn-around With Negligible Downtime. the Vendor Will Include Within Its Proposal The National Average Of Service Calls Per Analyzer Per Year. the Vendor Shall List Reagent Recalls/bulletins Within The Last Five Years. The Vendor Shall List Any Product Unavailability Due To Manufacturing Issues Within The Last Five Years. the Proposed Equipment Should Have At Least One-year Proven Experience And Be Available On The Federal Supply Schedule. ii 2.0 Value Added Characteristics: the Vendor Will Provide Replacement Parts And Any Components Necessary For The Operation Of The Instrument(s) To Produce Patient Results. the System May Have The Ability For The Electronic Transfer Of The Manufacturer S Qc Ranges To The Instrument Without The Need For Manual Entry. the System May Have The Ability To Have On-board Documentation For Out-of-range Quality Control And Instrumentation Problems. the Analyzer May Have Onboard Maintenance Records That Can Be Modified For Additional User Defined Maintenance Records And Printed At Selected Time Intervals For Maintenance Documentation. the System May Have A Touch-screen Interface In Addition To The Keyboard And Mouse. the Vendor May Provide On-site Refresher Training In Renewal Option Years Of The Contract If So Exercised. User Also Has The Option Of Sending One Additional Staff Member Per Analyzer For Primary Off-site Training In Renewal Option Years. Renewal Option Year Training Is To Include All Costs Of Off-site Training, I.e., Transportation (air And Ground), Room And Board, Etc. the System May List Additional Parameters Such As Lactic Acid, Creatinine, Blood Urea Nitrogen, Etc. That Can Be Analyzed On A Patient Sample. the System May Have Fda Approval For Ph Of Other Body Fluids. the System May Have The Ability To Have On-board Parallel Qc Lot Capability, Allowing For Old And New Lot Qc To Be Run Consecutively For Validation For Effective Time Management And Cap Compliance. iii 3.0 Other Terms And Conditions: unless Otherwise Agreed Upon By Both Parties, Terms And Conditions Of This Bpa Will Be Determined By The Vendor S Current Federal Supply Schedule Contract With The General Services Administration Or Va National Contract Center. all Pricing Will Be Based On And Shall Not Exceed The Vendor S Most Current Fss Contract Pricing For Supplies Offered. this Shall Be Based On Period Of Performance: 22 May 2024 To 30 April 2025 Base Year 1 May 2025 To 30 April 2026 Option Year 1 1 May 2026 To 30 April 2027 Option Year 2 1 May 2027 To 30 April 2028 Option Year 3 1 May 2028 To 30 April 2029 Option Year 4 attachment 1 annual Volume: test volume abg 6800 glucose 6800 ionized Calcium 12,176 co-oximitry 280 lactic Acid 4600 note: Va Puget Sound Health Care System Workload Increases 2.5% Each Year, On Average. 8. The Full Text Of Far And Vaar Provisions Or Clauses May Be Accessed Electronically At: http://acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp the Following Solicitation Provisions Apply To This Acquisition: 10. Far 52.212-1, Instructions To Offerors Commercial Items , Applies To This Acquisition And The Following Clauses And Instructions Are Added As Addenda: addendum To Far 52.212-1 Instructions To Offerors Commercial 52.252-1 solicitation Provisions Incorporated By Reference (feb 1998) 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (aug 2020) 52.211-6 brand Name Or Equal (aug 1999) 52.214-21 descriptive Literature (apr 2002) (a) Gray Market Items Are Original Equipment Manufacturers (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e. Replacement Parts) For Va Medical Centers. No Remanufactures Or Gray Market Items Will Be Acceptable. (b) Offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e. Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. (c) The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. (d) Any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. (e) Offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contactors, The Offeror Making Such Contact May Be Excluded From Award Considerations. (f) All Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. (g) All Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. (end Of Addendum To 52.212-1) 11. Far 52.212-2, Evaluation-commercial Items , Applies To This Acquisition. The Government Intends To Make A Best Value Determination Based On, But Not Limited To, The Following Evaluation Factors When Evaluating Offers: (a) Technical Compliance: quoted Commodities And Services/supplies Shall Be In Accordance With The Salient Characteristics And The Statement Of Work Above. (b) Price: price - The Offeror Shall Complete The Price/cost Schedule Provided In Section (5) Above. (c) Past Performance: past Performance The Offeror Shall Attach Contract Numbers Of Previous Similar Past Performance Along With A Very Brief Description Of Services. (d) Proof Of Meeting The Special Tasks And Salient Characteristics Per The Sow: the Offeror Shall Provide Either A Statement Or A Brief Synopsis Of The Process Outlining How They Intend To Meet The Standards Provided In Both Section (7) Statement Of Work And In Section (6) Salient Characteristics Order To Be Considered For Award. 12. Offerors Are Advised To Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Its Offer If Has Not Been Completed On Sam.gov. offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: 13. Far 52.212-4, Contract Terms And Conditions Commercial Items (oct 2018) addendum To Far 52.212-4 The Following Clauses Are Included As A Part Of The Addendum: 52.204-13 system For Award Management Maintenance (oct 2018) 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) 52.217-8 option To Extend Services (nov 1999) 52.217-9 option To Extend The Term Of The Contract (mar 2000) 52.232-40 providing Accelerated Payments To Small Business Subcontractors (dec 2013) 852.212-70, Provisions And Clauses Applicable To Va Acquisition Of Commercial Items (apr 2020). The Following Clauses Are Incorporated By This Clause: 852.203-70 commercial Advertising 852.211-70 equipment Operation And Maintenance Manuals 852.212-71 gray Market Items (apr 2020) 852.215-70 service-disabled Veteran-owned And Veteran-owned Small Business Evaluation Factors 852.219-10 va Notice Of Total Service-disabled Veteran-owned Small Business Set-aside. (nov 2020) 852.219-74 limitations On Subcontracting Monitoring And Compliance (jul 2018) 852.232-72 electronic Submission Of Payment Requests. 852.242-71 administrative Contracting Officer (oct 2020) 852.264-71 rejected Goods the Following Subparagraphs Of Far 52.212-5 Are Applicable: far 52.212-5 Applies To This Acquisition With The Following Far Clauses Incorporated By Reference; 52.203-6 restrictions On Subcontractor Sales To The Government (jun 2020) 52.204-10 reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (jun 2020) 52.219-8 utilization Of Small Business Concerns (oct 2018) 52.219-14 limitations On Subcontracting (jun 2020) 52.219-28 post Award Small Business Program Representation (may 2020) (15 U.s.c 632(a)(2)) 52.222-3 convict Labor (jun 2003) (e.o. 11755) 52.222-19 child Labor Cooperation With Authorities And Remedies (jan 2020) (e.o. 13126) In Both 52.222-21 prohibition Of Segregated Facilities (apr 2015) 52.222-26 equal Opportunity (sep 2016) (e.o. 11246) 52.222-35 equal Opportunity For Veterans (jun 2020) 52.222-36 equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793) 52.222-37 employment Reports On Veterans (jun 2020) 52.222-40 notification Of Employee Rights Under The National Labor Relations Act (dec 2010) 52.222-50 combating Trafficking In Persons (jan 2019) (22 U.s.c. Chapter 78 And E.o. 13627) 52.222-54 employment Eligibility Verification (oct 2015) 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513) 52.225-5 trade Agreements (oct 2019) 52.225-13 restrictions On Certain Foreign Purchases (jun 2008) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury) 52.232-33 payment By Electronic Funds Transfer System For Award Management (jul 2018) (31 U.s.c. 3332) 15. There Are No Additional Contract Requirements, Terms Or Conditions. 16. The Defense Priorities And Allocations System (dpas) Ratings Are Not Applicable. 17. Quotes Must Be Emailed To Dane.gift@va.gov And Received No Later Than 17:00 Pm Pst On 5/21/2024. Quotes May Be Submitted On The Vendor S Own Form Following The Format Found In Section 11 Evaluation-commercial Items . no Late Quotations Will Be Accepted. The Government Intends To Make Award Without Discussions. 18. For Information Regarding The Solicitation, Please Contact Dane Gift At Dane.gift@va.gov. department Of Veterans Affairs

Details: The subject of the Public Contract are Services Consisting of Ensuring the Operation of the Collection, Collection, Transport, Sorting, Utilization of Waste or Removal of Municipal Waste. The subject of the Services for Natural Persons and Originators involved in the City's Waste Management System is: A) Regular Collection and Energy Utilization/removal of All Mixed Municipal Waste Cat. Number 200301 "house from house" According to Appendix No. 1 of the Contract From the Territory of the City of Chýné B) Regular Collection and Material Use of All Biodegradable Waste Cat. Number 200201 "House From House" According to Annex No. 1 of the Contract on the Territory of the City of Chýně. C) Regular collection and material utilization of all plastic Cat. Number 200139 Mixed With Composite And Beverage Cartons Cat. Number 20010101 "House From House" According to Annex No. 1 of the Agreement on the Territory of the City of Chýně. D) Regular collection and material use of paper and cardboard Cat. Number 200101 "House From House" According to Annex No. 1 of the Contract on the Territory of the City of Chýně. E) Regular collection and material utilization of all glass Cat. Number 200102 From All Collection Nests According to Annex No. 1 and 2 of the Contract (containers Owned by the City). F) On Order Collection and Energy Utilization/removal of Bulky Waste Cat. Number 200307 From the Bulk Container According to Attachment No. 1 From the Collection Point (the container is owned by the Supplier). G) Regular collection and material utilization of all textile material Cat. Number 200111 Together With Clothing Cat. Number 200110 From the Collection Point According to Annexes No. 1 and 2 of the Contract (containers Owned by the City). H) Processing of Statements for the Authorized Packaging Company Eko-kom, As The statement will be submitted to the Customer by the 10th calendar day of the following month after the end of the calendar quarter. I) Keeping Continuous Records of Received Waste, Pursuant to Decree No. 383/2001 Coll., On Details of Waste Management, as Amended by Later Regulations. This record will be handed over to the customer by the 20th day of the following calendar month for the previous month in Xlsx format and by January 20th of the calendar year for the previous year in the data standard of the Integrated System for the Fulfillment of Reporting Obligations (ispop). This Record Will Be Submitted To The Customer For Approval And Sent As A Report On Waste Production And Waste Management In The Current Ispop Data Standard. J) Loading, Exporting and Transmitting Monthly Statements for All Collection Containers According to the Customer's Instructions. Scanning Collection Containers Using an Rfid Chip Reader. Online Connection of Readers for Payment Records. K) Outputs from the Service Provider's Sw Records in *.xlsx format according to the attached sample (Annex No. 4 of the Contract), delivered and uploaded to the City's website within 24 hours of the collection being carried out, or alternatively the possibility of providing open data online during the collection, which will be Possible to Immediately Transfer to Citizens. More details on the subject of performance are given in the appendices: Appendix No. 1 – Draft Contract and Appendix No. 5 – List and Price List of Tender Documentation Services.

Details: Description Procurement Of Equipment, Machinery, Materials/supplies And Other Necessary Items For The Beneficiaries Of Daetpreneur: Nurturing Success For Self-employed Workers In Daet Powertools Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 1 Unit Cut Off Machine, Continuous Rating Output 2,000 Watts, Wheel Diameter: 355mm (14”), Hole Diameter: 25.4mm (1”), No Load Speed: 3,800rpm, 4”diameter 1 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Up To 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 1 Unit Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 1 Set Needle File Set, (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File); Color Black; Metal Type: Carbon Steel; Handle Material: Wood, Alloy Steel; Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h) 1 Set Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 1 Unit Welding Magnets, 6 Pcs/set, Overall Length: At Least (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 1 Set Food Vending Materials/supplies Adjustable Hot Air Blower Sealing Machine Heating Machine; Power Supply: Ac220v; Output: 2000w ; Air Flow: 250-450l/min; No-load Speed: 8000rpm; Temperature Range: 60-600°c; Item Size: Approx. 25cm (l) X 7cm (w) X 19. 5cm (h) 1 Pc Barbecue Air Blower With Charger, Material: Iron, Voltage: 12v - 220v, Output:100w, Clamp: 12v,size For 100w Blower: Approx 23x21x17cm/9. 05x8. 27x6. 69in--- Air Duct Diameter 4. 5cm/1. 77in 1 Unit Barbeque Grill With Stand, Heavy Duty, L=19 Inches, W=12 Inches, H=33 Inches, Stainless Griller And G. I. Pipe Stand 1 Unit Basin; Stainless; Diameter: 22", Base: 16"; Depth: 7"; Thickness: 1cm 3 Pc Beach Umbrella, Round-shaped; Material: Poly Canvass; Diameter: 60"; Pole Stand Length: At Least 45"; Pole Material: Stainless Steel Chrome 4 Pc Cake Decorating Kit Stainless Icing Piping Nozzles Pastry Tips Cake Decorating Tips Set Stainless, 27 Stainless Steel Tips And 2 Reusable Plastic Couplers, Cake Decorating Tips: Closed Star, Open Star, French, Round, Plain, Leaf, And Petal; Strong, Durable, Stainless Steel; Corrosion Resistant 1 Set Caldero With Double Handle; Aluminum Material; Diameter;40cm; Height 28cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 7 Pc Casserole Set, Material: Stainless Steel, Diameter: 28, 30 And 32cm, Height: 16, 18, 20cm 6 Set Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 3 Pc Chest Cooler, Item Package Dimensions: ‎25. 8" (l) X 16. 2" (w) X 15. 7" (h), Package Weight: ‎5. 76kg, Inside Dimensions: 24. 95" (l) X 14. 58" (w) X 14. 77" (h), Material: ‎plastic, Chamber Depth: 24. 95", Capacity: 52l 12 Pc Chest Type Freezer, Solid Top With Glass Cover,hd Inverter 5. 5cu. Ft. , Weight:37 Kg,dimensions: 75. 5 × 57 × 87. 5 Cm, Fast Freezing Mode, Dual Function Technology (freezer Or Chiller), Led Lights, Key Lock, Roller Feet, Frontal Temperature Control, 1 Unit Chopping Knife; 10" Stainless; Wood Handle 1 Pc Colander With Handle (material: Stainless Steel, Size Medium: Top Diameter-23. 5 X Base Diameter-19. 5 X Height-7. 8 Cm) 8 Pc Commercial Blender,volume Capacity:1. 5l, Dimension: 26x27x47cm , Input Voltage 220v, Power Consumption: 1200w, 3 Horsepower, 38000 Rpm , Weight: 5kg 1 Unit Deep Electric Fryer, Capacity: 12l, Material: Stainless Steel, Voltage: 220v 60hz, Power: 2. 5kw + 2. 5kw, Temperature: 60° - 200°c, Basket Size: 18x20x10cm * 2 Basket, Pan Size:50x30x13cm, Machine Size:53x41x28cm 1 Unit Digital Kitchen Scale, Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0. 05 Oz Increments; Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade; Stainless Steel Platform: Approx. Dimension 7. 45110. 5" (l) X 5. 45053. 90" (w) X 0. 6-08" (h); 2 X 1. 5v Aaa Batteries 1 Pc Digital Weighing Scale, Capacity: 60kg, Material: Stainless Steel, Five Memories For Unit Price, Dual Display: Weight, Unit, Price, Amount, Automatic Energy Saving Mode, Led Display, Built In 4v/$ah Rechargeable Battery,power Supply: Ac/dc Charger Included, Operating Time: Over 3 Months When Fully Charged, Low Voltage Display And Overcharge Protection 1 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 15 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 12 Unit Food Storage Plastic, Set, 4 Pcs. Rectangular Plastic, Secure-fit Lid; 17x12. 2x5. 5cm (650ml); Materials: Polypropelene (pp) Food Grade Plastic Atleast 1mm Thick 2 Set Food Tong, Material: Stainless Steel, Length: 14" 6 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 48 Pcs Food Tray, Flat, Stainless , 37x47x2cm, Depth: 2cm 16 Pc Food Tray, Stainless(flat), 60x40x2cm , Depth: 2cm 4 Pc Freezer Chest Type, Gross / Net Volume 10. 6 Cu. Ft. (10 Liters) / 10. 1 Cu. Ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111. 4 X H 84. 7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 1 Unit Frying Pan 14" In Diameter, Cast Iron 8 Pc Gas Regulator And Accessories; With Gauge And Safety Device; Safety Push Protection For Leakage; Gas Auto Safe Controller; Rubber Gasket; Steel Belted; 1. 8m Hose, With Clamp 17 Set Industrial Pail With Cover And Metal Handle (20 Liters), Plastic Type: Pp 1 Pc Kawa; Big, Size: Diameter 52cm Height 18cm; Material: Aluminum; Double Handle 11 Pc Llanera, Round, Size: 7inches Diameter 3inches Height, Material: Aluminum 10 Pcs Lpg Tank; 11kg Cylinder 21 Unit Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups. The Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7. 13" (l) X 6. 75" (w) X 4. 38" (h); Measuring Capacity: 500ml 2 Set Measuring Spoons (set), 7pcs. Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0. 63ml), 1/4 Tsp (1. 25ml), 1/2 Tsp (2. 5ml), 3/4 Tsp (3. 75ml), 1 Tsp (5ml), 1/2 Tbsp (7. 5ml), 1 Tbsp (15ml) 2 Set Milk Tea Barrel, Product Size: 12l, Barrel Body Diameter: 24cm, Barrel Height: 47cm, Actual Capacity: 9. 50kg (9. 5l),product Material: Stainless Steel For Food Contact, Insulation Layer: Polyurethane Foam, Product Heat Resistance: 150⁰c, Product Cold Resistance: -30⁰c, 1 Unit Milk Tea Cup Sealer Machine, Degree Of Automation: Manual, Power: 270, Power Consumption: 270w, Maximum Size Of Applicable Container: 95, Weight: 9kg, Production Capacity: 80, Function: Sealing, Sealing Speed: 1-2s, Temperature Control Range: 0-250, Processing Customization: No, Dimensions: 27*24*65 Cm 1 Unit Milktea Pearl Container, Type: Whole Cover Lid, Material: Acrylic, Dimensions:17. 6 X 16. 2 X 10cm, Capacity: 1. 53l 2 Pcs Mixing Bowl Medium, Approx. Diameter: 28cm, Height: 11. 2cm; Material: Stainless; Capacity: Atleast 4l 6 Pc Monoblock Chair, Front Leg Distance 355mm Width Seat, With Backrest, Color: Beige, Seat Width: 375mm, Depth 330mm, Side Legs Distance Left: 378mm, Side Legs Distance Right: 378mm, Back Legs Distance: 210mm, Back Rest Height: 779mm, Set Back Height: 405mm, Seat Height: 376mm, Gross Weight: 2. 25kgs 12 Pc Monoblock Stool, Color: Beige, Legs Distance: 264 Mm, Seat Diameter: 320 Mm, Seat Height: 442 Mm 1 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 13 Pc Muffin Pan, 12 Holes; Inner Dimension: L35cm X W26cm X H3cm; Diameter: 6. 3cm; Material: Nonstick Carbon Steel; Weight: 360g; 1 Pc Muffin Pan, 6 Holes; Inner Dimension : L26. 5cm X W18. 5cm X H3cm; Diameter: 6. 3cm; Outer Dimension: L26. 5cmxw18. 7cmxh2. 7cm; Outer Diameter: 6. 5cm/4. 6cm; Usage : Muffin, Cupcakes Baking (full Size Cavity); Material : Non Stick Carbon Steel; Weight : 230g; 1 Pc Multi Dual Action Air Brush; Color: Silver + White; Material: Aluminum + Copper + Rubber + Nylon + Plastic; Plug Type: Eu / Us (optional); Input: 100-250v, Frequenzy: 50/60hz, 0. 6a Max Output: 12v Dc, 1. 6a; Air Output Per Min: 8l/min; Max Pressure: 25-30psi; Nozzle Diameter: 0. 3mm; Fluid Cup Capacity: 7cc Diameter Of Hose: 1/8"; Silicone Hose Length: 1. 5m; Air Compressor Size: 120 * 95 * 65mm / 4. 72 * 3. 74 * 2. 56in Airbrush Size: 14. 7 * 2. 8 * 8. 5cm / 5. 8 * 1. 1 * 3. 3in Item Weight: 791g / 27. 90oz (a Set) Package Size: 23. 88 * 17. 53 * 7. 62cm; (accessories Included: 1 * 0. 3mm Airbrush; 1 * Air Brush Holder; 1 * Air Compressor; 1 * Mini Air Filter; 1 * Air Hose; 1 * Ac Transformer; 1 * Instruction Manual ) 1 Set Multi-function Food Processor With Blender And Dry Mill With 4 Interchangeable Stainless-steel Blades For Slicing, Fine And Coarse, Shredding, And Chopping, 1. 0l Food Processor Capacity, 500watts, 220 Volts, Dimension: Whd 39x20x36 Cm, Housing Material: Metal; Pulse Switch, Safely Locking Lid, With Cord Storage, Non-slip Feet, Dishwasher Safe 2 Unit Package 1: Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 1 Unit Package 2. 1: 4 Plates Industrial Oven, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 36 X 25 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; G. I. Sheets Inner And Outer Walls And Stainless-steel Front Panel, With Tempered Glass; About 4-inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 1 Unit Palamigan Container W/ Gripo 15l, Dimension: 31. 8x23. 8x48. 5cm, Material: High Quality Durable Plastic 6 Pc Peanut Grinder, Material: Metal, Others, Galvanized, Stainless; Grinder Type: Electric; Food Processor Settings: Variable (manual); Volume Capacity: 3l; Input Voltage: 220v; Frequency: 60hz; Power Consumption: 1500w; Weight: 25kg; Dimension (l X W X H): 40x55x65cm; Speed ​​rated: 1400r / Min; Drill Width: 140mm; Rotation Direction: Counter Clockwise; Production Granulity: 30-200 Mesh 1 Unit Peanutbutter Jars; Dimension: Medium 13cm (h) X 7cm (dia) Plastic Pet Jar With Lid; 400ml 100 Pcs Puto Cups, Big, 24pcs/set, Plastic, Any Color 11 Sets Puto Cups, Small, 24pcs/set, Plastic, Any Color 11 Sets Sandok; 14" Length, Stainless Steel 10 Pc Shansi/pan Turner, Stainless (big) 9" Length 7 Pc Shrink Wrap Film/ Cap Seal; Dimension: 91mm X 26-30mm; 100pcs/pack 1 Pack Shrink Wrap Film/ Cap Seal;dimension: 119 Mm X 30-35 Mm ;100pcs/pack 1 Pack Single Burner Cast Iron Automatic Ignition Gas Stove, Total Length: 55cm/22 Inches Approx, Inner Burner Diameter: 18cm/7. 5 Inches Approx. , Total Outer Diameter: 28cm/11. 5 Inches Approx With Gas Regulator And Accessories 4 Unit Siomai Steamer Electric, 220w 3 Layers 23x 16, Glass 220v, Dimension: Lwh 34x21x61 Cm, 50-60hz, Sliding Glass Opener, Body Made In Steel And Glass 2 Pc Spanish Peanuts; Per Kg 5 Kgs Spatula (big), Heat Resistant Silicone, Approx. Dimension 14-15" (l) X 3-4" (w) X 0. 2-0. 5" (thickness); Color: White 4 Pc Standmixer, 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4. 5l W/ 5-speed Turbo Function; Color: Black, 350 Watts, 230volts/60hz; Body Material: Plastic, Blade Material: Stainless Steel, Dimension: Lwh 26x24x30cm 5 Unit Steamer; Aluminum; About 16" Diameter; 3 Layers With Cover; With Handle Per Layer 6 Set Vegetable Oil; 1 Liter 14 Liters Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 5 Pc Fabricated Nego Cart 1. Hauler 2, Body Materials: G.i. Pipe 3/4" (2pcs), G.i. Pipe 1" (2pcs), G.i. Pipe 1/2"(40pcs), Flat Bar 1/4x1"(4pcs), Side Wheel (300x17), Leaf Spring (7 Layers), Coilspring, Bolt And Nut Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Mint Green 1 Unit 1. Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole & Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Mint Green 2 Unit 1. Nego-kart With Bmx Bicycle; Fabricated (please See Attached Design And Specifications) Note: With Dole, Dilp & Negosyo Sa Kariton Logo At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6”x W-51” And H-23.6” X W29.5” Fully Painted Color: Mint Green 1 Unit 1. Hauler 1, Body Materials: Side Seat, Leaf Spring, Coilspring, G.i. Pipe 1" (4pcs), Flat Bar 2", 1 Roundbar 12mm 1pc , Epoxy Primer, Bolt & Nuts, Side Wheel Axle 1pc Note: With Dole & Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Mint Green 1 Unit T-shirt And Mug Printing Equipment, Materials/supplies Exposure Unit, 6 Uv Tubes,power Supply: 220v,printing Area: 45cm * 60cm, Appearance Size: 38cm * 39cm * Height 8.5cm, Ultraviolet Wavelength: 365-435nm,material: Metal Shell, Using 6 Ultraviolet Lamps 1 Unit Heat Press Machine, Printing Size: 38cm X 45cm, Voltage: 110v - 220v, Power: 1800w, Temperature Range: 0-220°c, Time Range: 0-999s, Weight: 27kgs, Packing Dimension: 82cmx45cmx46cm, Led Control Panel,teflon Coated Plate, Rubber Pad Working Area 1 Unit Mug Press Machine, Automatic Grade: Semi_automatic, Type: Heat Press Machine, Usage:mug Printer, Color & Page:multicolor, Voltage:110v/220v, Gross Power:300w/350w, Dimensions(l*w*h): 41*36*21cm, Weight: 7kg 1 Unit Paint Mixing Spatula, Material: Stainless Steel Metal With Wooden Handle, Size: 4” Metal Part, Handle 4” 1 Pc Printer, Print: Printer Type: Print, Scan, Copy,printing Technology: Print Method:on-demand Inkjet (piezoelectric) Printer Language:esc/p-r, Esc/p Raster Nozzle Configuration:180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 5760 X 1440 Dpi Automatic 2-sided Printing: No, Print Speed: Photo Default - 10 X 15 Cm / 4 X 6" *1:approx. 69 Sec Per Photo (border) / 90 Sec Per Photo (borderless)*2 Draft, A4 (black / Colour):up To 33.0 Ppm / 15.0 Ppm*2 Iso 24734, A4 Simplex (black / Colour):up To 10.0 Ipm / 5.0 Ipm*2 First Page Out Time From Ready Mode (black / Colour): Approx. 10 Sec / 16 Sec*2, Copying: Maximum Copies From Standalone:20 Copies,maximum Copy Resolution:600 X 600 Dpi,maximum Copy Size:a4, Letter Iso 29183, A4 Simplex (black / Colour):up To 7.0 Ipm / 1.7 Ipm,pc Printing/ Premium Glossy Photo Paper Best Photo:sound Power (black / Colour) 5.1 / 5.2 B(a),sound Pressure (black / Colour) 38 / 39 Db(a)pc Printing / Plain Paper Default*4:sound Power (black / Colour) 6.4 / 6.2 B(a),sound Pressure (black / Colour) 50 / 48 Db(a) Scanning: Scanner Type:flatbed Colour Image Scanner, Sensor Type:cis Optical Resolution:600 X 1200 Dpi Maximum Scan Area:216 X 297 Mm Scanner Bit Depth (colour): 48-bit Input, 24-bit Output Scanner Bit Depth (grayscale):16-bit Input, 8-bit Output Scanner Bit Depth (black & White):16-bit Input, 1-bit Output, General: Operating System Compatibility:windows Xp / Xp Professional / Vista / 7 / 8 / 8.1 / 10,windows Server 2003 / 2008 / 2012 / 2016 / 2019,mac Os X 10.6.8 Or Later, Electrical Specifications:rated Voltage:ac 220-240 V,rated Frequency:50-60 Hz,operating:14.0 W,sleep:0.4 W,power Off:0.2 W Standby:4.0 W,interface:usb:usb 2.0, Dimensions And Weight:dimensions (w X D X H):375 X 347 X 179mm,weight:3.9 Kg, Consumables: Black Ink Bottle: Page Yield*5: 4,500 Pages Order Code: 003 (c13t00v100 / C13t00v199 (indonesia)) Cyan Ink Bottle: Page Yield*5: 7,500 Pages (composite Yield) Order Code: 003 (c13t00v200 / C13t00v299 (indonesia)) Magenta Ink Bottle: Page Yield*5: 7,500 Pages (composite Yield) Order Code: 003 (c13t00v300 / C13t00v399 (indonesia)) Yellow Ink Bottle: Page Yield*5: 7,500 Pages (composite Yield) Order Code: 003 (c13t00v400 / C13t00v499 (indonesia)) 1 Unit Silk Screen Printing Frame, Material Wood, High Tension 45 Degree Cross Cut Miter Joint, V-nail Secured, Size: Extra Large: 15"x20.75" (inside Dimension) 5 Pcs Squegee, Material:rubber With Aluminum Handle, Size: 3inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 4inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 5inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 6inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 7inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 8inches 1 Pc Stainless Coater, Material: Aluminum, Size: 30cm 1 Pc Sublimation Blank Mug, Material: Ceramic, Capacity: 11 Oz/300 Ml, Product Size 8.2*9.5cm, Color: Black, Shape: Round 45 Pcs Sublimation Paper 100gsm, Size: A4, 100 Sheets Per Pack 4 Packs Events Decorations Materials/ Supplies Arch Flower Stand, Material: Iron, Size: 140x38x240cm / 55.1*15*94.5", Pipe Diameter: 13mm, Color: Preferably White 2 Pcs Artificial Grass Carpet, Material: Polyester Fiber, Thickness: 3cm, Size: 1meter X 4meters 1 Yard Artificial Tulip Flower, Material: Pu Latex + Plastic, Flower Heads Height: 4.5cm, Total Length: 34cm, Assorted Colors: Champagne, White, Pink, Red, Blue 16 Pcs Background Stand Backdrop Support Technical Specs: Light Stand: Material: Aluminum Alloy, Sections: 3,max Height: 2m, Min Height: 0.9m, Folded Height: 07m, Diameter Of Legs: Φ22cm, Net Weight: 2.4kg Light Stand: Material: Aluminum Alloy, Sections: 3,max Height: 2m, Min Height: 0.9m, Folded Height: 07m, Diameter Of Legs: Φ22cm, Net Weight: 2.4kg Cross Bars: Material: Aluminum Alloy, Interlocking Cross Bars, Sections: 3, Diameter: 70cm,max Length: 2m, Min Length: 1.4m; Heavy Duty Spring Clamps: Material: Nylon, Holds Canvas, Muslin Or Paper 1 Set Balloon Stand With Base Kits, Material: Plastic, Size: Base 21cm(8.26"), Tube 120cm(50") 6 Pcs Electric Balloon Pump With 2 Inflation Nozzles, Voltage: 110 - 240v, Plug: Us / Eu, Power: 800w, Material: Plastic, Frequency: 50hz / 60hz, Power Supply: - Us: Ac110v ~ 120v, 60hz - Eu: Ac220v ~ 240v, 50hz , Color: Red, Product Weight: 1689 G / 59.58 Ounces, Product Dimensions (l*w*h): 150*190*140 Mm / 5.91*7.48*5.51 Inches, Package Weight: 1600.0 G / 56.44 Ounces, Package Dimensions (l*w*h): 160*200*150 Mm / 6.30*7.87*5.91 Inches 1 Unit Foam Sheet, Size: 200cmx60cm, Thickness: 3 Mm, Assorted Colors (white, Light Pink, Light Green, Light Violet, Light Orange, Light Yellow) 4 Rolls Plain Cloth, Silk, Assorted Colors (black, Silver, Matte Gold, Dark Peach, Light Violet) - 30 Yards Each 150 Yards White Roman Column Pillar, Color: White, Material: High-quality Resin Material, Height 87cm, Width 14cm 4 Pcs Sewing Equipments/supplies Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 1 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm With Flat Table , Size : L107cm X W54cm Xh75xm) 1 Unit Flat Iron, Ceramic Sole Plate At Least 8" (l); Rated Voltage: 230v; Rated Power: 1600w; Water Tank Capacity: 220ml 1 Unit French Curve, Material: Plastic; Color: White; Size: Approx. 58cm (l) X 40cm (w) 1 Pc Geena Silk Fabric (assorted Colors); W- 96" 20 Yards L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 1 Pc Meter Stick, Color: Yellow; Wood Type; About 100 Cm 1 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 1 Box Tape Measure, Material: Durable Soft Plastic; Color: Preferably Blue; Measurements: Inches (can Measure Up To 60") And Centimeters (can Measure Up To 150cm) 2pcs

Details: Statement Of Work cepheid Genexpert Maintenance And Support general scope Of Services: the Purpose Of This Requirement Is To Provide Full-service Maintenance And Repair For Twelve (12) Cepheid Genexpert Laboratory Analyzer Systems Across The Veterans Integrated Service Network (visn) 5 Medical Centers. The Requirement Includes The Scheduled Maintenance And Corrective Maintenance According To The Manufacturer S Recommendations/procedures. The Contractor Shall Provide All Resources Necessary To Accomplish The Deliverables Described In This Statement Of Work (sow), Except As May Otherwise Be Specified. a Firm-fixed Price Contract Is Anticipated. locations: beckley Va Medical Center, 200 Veterans Ave, Beckley Wv 25801-6444 hershel "woody" Williams Va Medical Center, 1540 Spring Valley Drive, Huntington Wv 25704 louis A. Johnson Va Medical Center, 1 Medical Center Drive, Clarksburg Wv 26301 martinsburg Va Medical Center, 510 Butler Avenue, Martinsburg Wv 25405 va Maryland Healthcare System, 10 N Greene St, Baltimore, Md 21201 washington Dc Va Medical Center, 50 Irving Street, Nw, Washington Dc 20422 work Hours hours Of Operation: Normal Business Hours Are Monday Through Friday, 8:00 A.m. To 4:30 P.m., Excluding Holidays. Should The Contractor Require Work Afterhours, The Contractor Shall Arrange In Advance With The Contracting Officer S Representative (cor). delivery Hours: The Warehouse Is Open To Receive Deliveries Monday Through Friday, 8:00 A.m. To 4:00 P.m., Excluding Holidays. national Holidays: The Holidays Observed By The Federal Government Are: New Year S Day, Martin Luther King Day, President S Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veteran S Day, Thanksgiving Day, And Christmas Day And Any Other Day Specifically Declared By The President Of The United States To Be A National Holiday. Contractor May Work On Holidays With Prior Communication And Coordination. period Of Performance base Year march 23, 2024 March 22, 2025 1st Option Period march 23, 2025 March 22, 2026 2nd Option Period march 23, 2026 March 22, 2027 3rd Option Period march 23, 2027 March 22, 2028 4th Option Period march 23, 2028 March 22, 2029 equipment ee# serial # manufacturer model #/name location 544496 808373 cepheid genexpert Infinity-48s baltimore, Md 32749 110004114 cepheid genexpert Iv beckley, Wv 35406 120001412 cepheid genexpert Xvi beckley, Wv 36204 110019557 cepheid genexpert Xvi clarksburg, Wv 34528 110016198 cepheid genexpert Xvi clarksburg, Wv 62866 110019089 cepheid genexpert Xvi huntington, Wv 49996 803748 cepheid genexpert Xvi martinsburg, Wv 75393 110020210 cepheid genexpert Xvi martinsburg, Wv 1291876 802387 cepheid genexpert Xvi washington Dc 1327503 110001056 cepheid genexpert Iv washington Dc specifications preventative Maintenance this Contract Shall Include All Preventative Maintenance Of The Equipment According To Manufacturer S Recommendations/procedures In The Equipment Manual. all Tasks In The Manufacturer S Procedures Shall Be Completed At The Manufacturer S Listed Frequencies. calibration-- Contractor Will Guarantee Proper Calibration Specification (for All Included Equipment) Will Meet Standards For One Full Year Or Until Next Required Calibration. Contractor Shall Provide Certificate Of Calibration For The Equipment. corrective Maintenance the Contract Shall Include All Corrective (unplanned) Maintenance/repair Of The Equipment In Accordance With The Manufacturer S Manual. recalls & Alerts-- Contractor Shall Perform All Remediation Actions Needed For Product Alerts And Recalls Issued For The Equipment. parts/materials/tools/labor all Parts And Materials To Complete The Maintenance Shall Be Included As A Part Of This Contract. all Parts And Materials For Maintenance And Repair Shall Meet Current Manufacturer Standards. contractor Shall Provide Their Own Tools To Complete The Maintenance. all Labor (including Travel) To Complete The Maintenance Is Included In The Contract. updates/patching contractor Shall Complete Available Updates To The Software At The Discretion Of Biomedical Engineering. contractor Shall Complete All Patching According To Manufacturer S Specifications. response Time contractor Shall Respond To Trouble Phone Calls Within Thirty Minutes. contractor Shall Perform All Scheduled And Unscheduled Services (including Emergencies) On-site, During Normal Business Hours To Include Repair, Labor And Travel At No Additional Cost. contractor Shall Maintain An Uptime Guarantee Of 98% Or Better check In/out contractor Personnel Arriving On-site To Perform Work Shall Report To The Biomedical Engineering Department. contractor Personnel Shall Sign In Using The Department S Vendor Sign In Sheet, Filling Out All Required Information. contractor Personnel S Tool Bags Are Subject To Inspection By The Biomedical Engineering Department Upon Arrival And Upon Departure. contractor Personnel Shall Sign Out Upon Completion Of Visit. prior To Departure, Contractor Personnel Are Required To, At A Minimum, Verbally Report Any Issues With The Equipment To The Biomedical Engineering Department, Especially Noting If The System Is Still Down Or Not Fully Repaired. the Va Campus Is Non-smoking. Contractor Personnel Are Required To Comply With This Policy. parking. It Is The Responsibility Of The Contractor To Park In The Appropriate Desig Nated Park Ing Areas. reporting contractor Shall Provide A Copy Of The Service Report, Complete With Test Data, To The Contract Cor Within Five Working Days After Completion Of Any Services. service Reports Shall Include Identifying Information About The Equipment, All Services Provided During The Service Visit, Any Issues Found During The Visit, The Technician/engineer Names Of The Personnel Performing Work, And The Date Service Was Provided. remote Support the Contractor Shall Provide A Telephone Line Available 24/7 For Technical Support. Contractor Shall Also Provide A Phone Number For Va Staff To Call To Dispatch Contractor Field Service Engineers/technicians. if Remote Support Via Site-to-site Virtual Private Network (vpn) Is Required, Contractor Shall Work With The Cor And The Facility Information Security Officer (iso) To Meet The Requirements Prior To Connection. A National Site To Site Mou/isa Is The Preferred Way To Complete This Connection. patient Health Information the Contractor Shall Safeguard Patient Health Information. the Contractor Shall Report To The Biomedical Engineering Department Any Issues With Disclosed Or Unsecure Patient Health Information. contractor Shall Note Remove Any Hard Drives, Storage Devices, Or Anything Containing Patient Health Information From The Site. contractor Requirements all Contractor Personnel Performing Services On The Equipment Shall Have Factory Training And Experience In The Maintenance And Repair Of The Equipment. contractor Shall Provide Copies Of Training Certificates For The Contractor Personnel Performing Work On-site Upon The Request Of The Government. safety And Security contractor Shall Follow All Occupational Safety And Health Administration (osha) Laws And Regulations. The Contractor Is Responsible For Reporting Any Hazards They Come Across To Their Point Of Contact. contractor Shall Follow All Local Procedures Concerning Infection Control. Should The Contractor Be Unsure Of The Requirements, The Cor Can Provide The Specific Information And Procedures. contractor Personnel Shall Wear Visible Identification At All Times While On Va Property. Contract Personnel Are Required To Identify Themselves As Such To Avoid Creating An Impression In The Minds Of Members Of The Public That They Are Government Officials. property Damage the Contractor Shall Take All Necessary Precautions To Prevent Damage To Any Government Property. the Contractor Shall Report Any Damages Immediately And Shall Be Assessed Current Replacement Costs For Property Damaged By The Contractor, Unless Corrective Action Is Taken. any Damaged Material (i.e., Trees, Shrubs, Lawn/turf, Curbs, Gutters, Sidewalks, Etc.) Will Be Replaced In A Timely Manner Or Corrected By The Contractor With Like Materials, At No Extra Cost To The Government, Upon Approval Of The Contracting Officer. chemical Use prior To Performance Of Any Work, The Contractor Will Be Required To Furnish The Contracting Officer With The Trade Names (if Any) And Chemical Names Of All Chemicals To Be Used, Along With A Label Showing Contents, The Use Strength Of The Chemical As Applied, And The Antidote Thereto. contractor Shall Furnish The Same Information Each Time A Change Is Made To The Chemicals Or Products Used In The Performance Of This Contract. this Information Is Required For Emergency Treatment In The Event Of Ingestion Or And/or Contact With The Material By Humans. quality Assurance end-users, Biomedical Engineering, And/or The Contract Cor Shall Perform System Verification Tests To Ensure The System Is Fully Functional Following Service/repairs. issues With The Quality Of The Contractor S Work Will Be Communicated Through The Contracting Officer To The Contractor Point Of Contact For Resolution. documentation With Be Completed In The Government Systems. va Information And Information System Security/privacy Language 1. General contractors, Contractor Personnel, Subcontractors, And Subcontractor Personnel Shall Be subject To The Same Federal Laws, Regulations, Standards, And Va Directives And Handbooks As Va And Va Personnel Regarding Information And Information System Security. 2. Access To Va Information And Va Information Systems a. A Contractor/subcontrator Shall Request Logical (technical) Or Physical Access To Va information And Va Information Systems For Their Employees, Subcontractors, And Affiliates Only To The Extent Necessary To Perform The Services Specified In The Contract, Agreement, Or Task Order. b. All Contractors, Subcontractors, And Third-party Servicers And Associates Working With va Information Are Subject To The Same Investigative Requirements As Those Of Va Appointees Or Employees Who Have Access To The Same Types Of Information. The Level And Process Of Background Security Investigations For Contractors Must Be In Accordance With Va Directive And Handbook 0710, Personnel Suitability And Security Program. The Office For Operations, Security, And Preparedness Is Responsible For These Policies And Procedures. c. Contract Personnel Who Require Access To National Security Programs Must Have A Valid Security Clearance. National Industrial Security Program (nisp) Was Established By Executive Order 12829 To Ensure That Cleared U.s. Defense Industry Contract Personnel Safeguard The Classified Information In Their Possession While Performing Work On Contracts, Programs, Bids, Or Research And Development Efforts. The Department Of Veterans Affairs Does Not Have A Memorandum Of Agreement With Defense Security Service (dss). Verification Of A Security Clearance Must Be Processed Through The Special Security Officer Located In The Planning And National Security Service Within The Office Of Operations, Security, And Preparedness. d. Custom Software Development And Outsourced Operations Must Be Located In The U.s. To The Maximum Extent Practical. If Such Services Are Proposed To Be Performed Abroad And Are Not Disallowed By Other Va Policy Or Mandates, The Contractor/subcontractor Must State Where All Non-u.s. Services Are Provided And Detail A Security Plan, Deemed To Be Acceptable By Va, Specifically To Address Mitigation Of The Resulting Problems Of Communication, Control, Data Protection, And So Forth. Location Within The U.s. May Be An Evaluation Factor. e. The Contractor Or Subcontractor Must Notify The Contracting Officer Immediately When an Employee Working On A Va System Or With Access To Va Information Is Reassigned Or Leaves The Contractor Or Subcontractor S Employ. The Contracting Officer Must Also Be Notified Immediately By The Contractor Or Subcontractor Prior To An Unfriendly Termination. information Made Available To The Contractor Or Subcontractor By Va For The Performance Or Administration Of This Contract Or Information Developed By The Contractor/subcontractor In Performance Or Administration Of The Contract Shall Be Used Only For Those Purposes And Shall Not Be Used In Any Other Way Without The Prior Written Agreement Of The Va. This Clause Expressly Limits The Contractor/subcontractor's Rights To Use Data As Described In Rights In Data - General, Far 52.227-14(d) (1). va Information Should Not Be Co-mingled, If Possible, With Any Other Data On The Contractors/subcontractor S Information Systems Or Media Storage Systems In Order To Ensure Va Requirements Related To Data Protection And Media Sanitization Can Be Met. If Co-mingling Must Be Allowed To Meet The Requirements Of The Business Need, The Contractor Must Ensure That Va S Information Is Returned To The Va Or Destroyed In Accordance With Va S Sanitization Requirements. Va Reserves The Right To Conduct On-site Inspections Of Contractor And Subcontractor It Resources To Ensure Data Security Controls, Separation Of Data And Job Duties, And Destruction/media Sanitization Procedures Are In Compliance With Va Directive Requirements. prior To Termination Or Completion Of This Contract, Contractor/subcontractor Must Not Destroy Information Received From Va, Or Gathered/created By The Contractor In The Course Of Performing This Contract Without Prior Written Approval By The Va. Any Data Destruction Done On Behalf Of Va By A Contractor/subcontractor Must Be Done In Accordance With National Archives And Records Administration (nara) Requirements As Outlined In Va Directive 6300, Records And Information Management And Its Handbook 6300.1 Records Management Procedures, Applicable Va Records Control Schedules, And Va Handbook 6500.1, Electronic Media Sanitization. Self-certification By The Contractor That The Data Destruction Requirements Above Have Been Met Must Be Sent To The Va Contracting Officer Within 30 Days Of Termination Of The Contract. the Contractor/subcontractor Must Receive, Gather, Store, Back Up, Maintain, Use, Disclose And Dispose Of Va Information Only In Compliance With The Terms Of The Contract And Applicable Federal And Va Information Confidentiality And Security Laws, Regulations And Policies. If Federal Or Va Information Confidentiality And Security Laws, Regulations And Policies Become Applicable To The Va Information Or Information Systems After Execution Of The Contract, Or If Nist Issues Or Updates Applicable Fips Or Special Publications (sp) After Execution Of This Contract, The Parties Agree To Negotiate In Good Faith To Implement The Information Confidentiality And Security Laws, Regulations And Policies In This Contract. the Contractor/subcontractor Shall Not Make Copies Of Va Information Except As Authorized And Necessary To Perform The Terms Of The Agreement Or To Preserve Electronic Information Stored On Contractor/subcontractor Electronic Storage Media For Restoration In Case Any Electronic Equipment Or Data Used By The Contractor/subcontractor Needs To Be Restored To An Operating State. If Copies Are Made For Restoration Purposes, After The Restoration Is complete, The Copies Must Be Appropriately Destroyed. f. If Va Determines That The Contractor Has Violated Any Of The Information Confidentiality, Privacy, And Security Provisions Of The Contract, It Shall Be Sufficient Grounds For Va To Withhold Payment To The Contractor Or Third Party Or Terminate The Contract For Default Or Terminate For Cause Under Federal Acquisition Regulation (far) Part 12. if A Vha Contract Is Terminated For Cause, The Associated Baa Must Also Be Terminated And Appropriate Actions Taken In Accordance With Vha Handbook 1600.01, Business Associate Agreements. Absent An Agreement To Use Or Disclose Protected Health Information, There Is No Business Associate Relationship. the Contractor/subcontractor Must Store, Transport, Or Transmit Va Sensitive Information In An Encrypted Form, Using Va-approved Encryption Tools That Are, At A Minimum, Fips 140-2 Validated. the Contractor/subcontractor S Firewall And Web Services Security Controls, If Applicable, Shall Meet Or Exceed Va S Minimum Requirements. Va Configuration Guidelines Are Available Upon Request. except For Uses And Disclosures Of Va Information Authorized By This Contract For Performance Of The Contract, The Contractor/subcontractor May Use And Disclose Va Information Only In Two Other Situations: (i) In Response To A Qualifying Order Of A Court Of Competent Jurisdiction, Or (ii) With Va S Prior Written Approval. The Contractor/subcontractor Must Refer All Requests For, Demands For Production Of, Or Inquiries About, Va Information And Information Systems To The Va Contracting Officer For Response. notwithstanding The Provision Above, The Contractor/subcontractor Shall Not Release Va Records Protected By Title 38 U.s.c. 5705, Confidentiality Of Medical Quality Assurance Records And/or Title 38 U.s.c. 7332, Confidentiality Of Certain Health Records Pertaining To Drug Addiction, Sickle Cell Anemia, Alcoholism Or Alcohol Abuse, Or Infection With Human Immunodeficiency Virus. If The Contractor/subcontractor Is In Receipt Of A Court Order Or Other Requests For The Above Mentioned Information, That Contractor/subcontractor Shall Immediately Refer Such Court Orders Or Other Requests To The Va Contracting Officer For Response. for Service That Involves The Storage, Generating, Transmitting, Or Exchanging Of Va Sensitive Information But Does Not Require C&a Or An Mou-isa For System Interconnection, The Contractor/subcontractor Must Complete A Contractor Security Control Assessment (csca) On A Yearly Basis And Provide It To The Cotr. information System Design And Development a. Information Systems That Are Designed Or Developed For Or On Behalf Of Va At Non-va Facilities Shall Comply With All Va Directives Developed In Accordance With Fisma, Hipaa, Nist, And Related Va Security And Privacy Control Requirements For Federal Information Systems. This Includes Standards For The Protection Of Electronic Phi, Outlined In 45 C.f.r. Part 164, Subpart C, Information And System Security Categorization Level Designations In Accordance With Fips 199 And Fips 200 With Implementation Of All Baseline Security Controls Commensurate With The Fips 199 System Security Categorization (reference Appendix D Of Va Handbook 6500, Va Information Security Program). During The Development Cycle A Privacy impact Assessment (pia) Must Be Completed, Provided To The Cotr, And Approved By The Va Privacy Service In Accordance With Directive 6507, Va Privacy Impact Assessment. the Contractor/subcontractor Shall Certify To The Cotr That Applications Are Fully Functional And Operate Correctly As Intended On Systems Using The Va Federal Desktop Core Configuration (fdcc), And The Common Security Configuration Guidelines Provided By Nist Or The Va. This Includes Internet Explorer 7 Configured To Operate On Windows Xp And Vista (in Protected Mode On Vista) And Future Versions, As Required. the Standard Installation, Operation, Maintenance, Updating, And Patching Of Software Shall Not Alter The Configuration Settings From The Va Approved And Fdcc Configuration. Information Technology Staff Must Also Use The Windows Installer Service For Installation To The Default Program Files Directory And Silently Install And Uninstall. applications Designed For Normal End Users Shall Run In The Standard User Context Without Elevated System Administration Privileges. the Security Controls Must Be Designed, Developed, Approved By Va, And Implemented In Accordance With The Provisions Of Va Security System Development Life Cycle As Outlined In Nist Special Publication 800-37, Guide For Applying The Risk Management Framework To Federal Information Systems, Va Handbook 6500, Information Security Program And Va Handbook 6500.5, Incorporating Security And Privacy In System Development Lifecycle. the Contractor/subcontractor Is Required To Design, Develop, Or Operate A System Of Records Notice (sor) On Individuals To Accomplish An Agency Function Subject To The Privacy Act Of 1974, (as Amended), Public Law 93-579, December 31, 1974 (5 U.s.c. 552a) And Applicable Agency Regulations. Violation Of The Privacy Act May Involve The Imposition Of Criminal And Civil Penalties. the Contractor/subcontractor Agrees To: comply With The Privacy Act Of 1974 (the Act) And The Agency Rules And Regulations Issued Under The Act In The Design, Development, Or Operation Of Any System Of Records On Individuals To Accomplish An Agency Function When The Contract Specifically Identifies: the Systems Of Records (sor); And the Design, Development, Or Operation Work That The Contractor/subcontractor Is To Perform; include The Privacy Act Notification Contained In This Contract In Every Solicitation And Resulting Subcontract And In Every Subcontract Awarded Without A Solicitation, When The Work Statement In The Proposed Subcontract Requires The Redesign, Development, Or Operation Of A Sor On Individuals That Is Subject To The Privacy Act; And (3) Include This Privacy Act Clause, Including This Subparagraph (3), In All Subcontracts Awarded Under This Contract Which Requires The Design, Development, Or Operation Of Such A Sor. h. In The Event Of Violations Of The Act, A Civil Action May Be Brought Against The Agency Involved When The Violation Concerns The Design, Development, Or Operation Of A Sor On Individuals To Accomplish An Agency Function, And Criminal Penalties May Be Imposed Upon The Officers Or Employees Of The Agency When The Violation Concerns The Operation Of A Sor On Individuals To Accomplish An Agency Function. For Purposes Of The Act, When The Contract Is For The Operation Of A Sor On Individuals To Accomplish An Agency Function, The Contractor/subcontractor Is Considered To Be An Employee Of The Agency. Operation Of A System Of Records Means Performance Of Any Of The Activities Associated With Maintaining The Sor, Including The Collection, Use, Maintenance, And Dissemination Of Records. Record Means Any Item, Collection, Or Grouping Of Information About An Individual That Is Maintained By An Agency, Including, But Not Limited To, Education, Financial Transactions, Medical history, And Criminal Or Employment History And Contains The Person S Name, Or Identifying Number, Symbol, Or Any Other Identifying Particular Assigned To The Individual, Such As A Fingerprint Or Voiceprint, Or A Photograph. System Of Records Means A Group Of Any Records Under The Control Of Any Agency From Which Information Is Retrieved By The Name Of The Individual Or By Some Identifying Number, Symbol, Or Other Identifying Particular Assigned To The Individual. the Vendor Shall Ensure The Security Of All Procured Or Developed Systems And Technologies, Including Their Subcomponents (hereinafter Referred To As Systems ), Throughout The Life Of This Contract And Any Extension, Warranty, Or Maintenance Periods. This Includes, But Is Not Limited To Workarounds, Patches, Hotfixes, Upgrades, And Any Physical Components (hereafter Referred To As Security Fixes) Which May Be Necessary To Fix All Security Vulnerabilities Published Or Known To The Vendor Anywhere In The Systems, Including Operating Systems And Firmware. The Vendor Shall Ensure That Security Fixes Shall Not Negatively Impact The Systems. the Vendor Shall Notify Va Within 24 Hours Of The Discovery Or Disclosure Of Successful Exploits Of The Vulnerability Which Can Compromise The Security Of The Systems (including The Confidentiality Or Integrity Of Its Data And Operations, Or The Availability Of The System). Such Issues Shall Be Remediated As Quickly As Is Practical, But In No Event Longer Than Days. when The Security Fixes Involve Installing Third Party Patches (such As Microsoft Os Patches Or Adobe Acrobat), The Vendor Will Provide Written Notice To The Va That The Patch Has Been Validated As Not Affecting The Systems Within 10 Working Days. When The Vendor Is Responsible For Operations Or Maintenance Of The Systems, They Shall Apply The Security Fixes Within Days. all Other Vulnerabilities Shall Be Remediated As Specified In This Paragraph In A Timely Manner Based On Risk, But Within 60 Days Of Discovery Or Disclosure. Exceptions To This Paragraph (e.g. For The Convenience Of Va) Shall Only Be Granted With Approval Of The Contracting Officer And The Va Assistant Secretary For Office Of Information And Technology. information System Hosting, Operation, Maintenance, Or Use for Information Systems That Are Hosted, Operated, Maintained, Or Used On Behalf Of Va At Non-va Facilities, Contractors/subcontractors Are Fully Responsible And Accountable For Ensuring Compliance With All Hipaa, Privacy Act, Fisma, Nist, Fips, And Va Security And Privacy Directives And Handbooks. This Includes Conducting Compliant Risk Assessments, Routine Vulnerability Scanning, System Patching And Change Management Procedures, And The Completion Of An Acceptable Contingency Plan For Each System. The Contractor S Security Control Procedures Must Be Equivalent, To Those Procedures Used To Secure Va Systems. A Privacy Impact Assessment (pia) Must Also Be Provided To The Cotr And Approved By Va Privacy Service Prior To Operational Approval. All External Internet Connections To Va S Network Involving Va Information Must Be Reviewed And Approved By Va Prior To Implementation. adequate Security Controls For Collecting, Processing, Transmitting, And Storing Of Personally Identifiable Information (pii), As Determined By The Va Privacy Service, Must Be In Place, Tested, And Approved By Va Prior To Hosting, Operation, Maintenance, Or Use Of The Information System, Or Systems By Or On Behalf Of Va. These Security Controls Are To Be Assessed And Stated Within The Pia And If These Controls Are Determined Not To Be In Place, Or Inadequate, A Plan Of Action And Milestones (poa&m) Must Be Submitted And Approved Prior To The Collection Of Pii. outsourcing (contractor Facility, Contractor Equipment Or Contractor Staff) Of Systems Or Network Operations, Telecommunications Services, Or Other Managed Services Requires Certification And Accreditation (authorization) (c&a) Of The Contractor S Systems In Accordance With Va Handbook 6500.3, Certification And Accreditation And/or The Va Ocs Certification Program Office. Government-owned (government Facility Or Government Equipment) Contractor-operated Systems, Third Party Or Business Partner Networks Require Memorandums Of Understanding And Interconnection Agreements (mou-isa) Which Detail What Data Types Are Shared, Who Has Access, And The Appropriate Level Of Security Controls For All Systems Connected To Va Networks. the Contractor/subcontractor S System Must Adhere To All Fisma, Fips, And Nist Standards Related To The Annual Fisma Security Controls Assessment And Review And Update The Pia. Any Deficiencies Noted During This Assessment Must Be Provided To The Va Contracting Officer And The Iso For Entry Into Va S Poa&m Management Process. The Contractor/subcontractor Must Use Va S Poa&m Process To Document Planned Remedial Actions To Address Any Deficiencies In Information Security Policies, Procedures, And Practices, And The Completion Of Those Activities. Security Deficiencies Must Be Corrected Within The Timeframes Approved By The Government. Contractor/subcontractor Procedures Are Subject To Periodic, Unannounced Assessments By Va Officials, Including The Va Office Of Inspector General. The Physical Security Aspects Associated With Contractor/subcontractor Activities Must Also Be Subject To Such Assessments. If Major Changes To The System Occur That May affect The Privacy Or Security Of The Data Or The System, The C&a Of The System May Need To Be Reviewed, Retested And Re-authorized Per Va Handbook 6500.3. This May Require Reviewing And Updating All Of The Documentation (pia, System Security Plan, Contingency Plan). The Certification Program Office Can Provide Guidance On Whether A New C&a Would Be Necessary. the Contractor/subcontractor Must Conduct An Annual Self Assessment On All Systems And Outsourced Services As Required. Both Hard Copy And Electronic Copies Of The Assessment Must Be Provided To The Cotr. The Government Reserves The Right To Conduct Such An Assessment Using Government Personnel Or Another Contractor/subcontractor. The Contractor/subcontractor Must Take Appropriate And Timely Action (this Can Be Specified In The Contract) To Correct Or Mitigate Any Weaknesses Discovered During Such Testing, Generally At No Additional Cost. va Prohibits The Installation And Use Of Personally-owned Or Contractor/subcontractor- Owned Equipment Or Software On Va S Network. If Non-va Owned Equipment Must Be Used To Fulfill The Requirements Of A Contract, It Must Be Stated In The Service Agreement, Sow Or Contract. All Of The Security Controls Required For Government Furnished Equipment (gfe) Must Be Utilized In Approved Other Equipment (oe) And Must Be Funded By The Owner Of The Equipment. All Remote Systems Must Be Equipped With, And Use, A Va-approved Antivirus (av) Software And A Personal (host-based Or Enclave Based) Firewall That Is Configured With A Va- Approved Configuration. Software Must Be Kept Current, Including All Critical Updates And Patches. Owners Of Approved Oe Are Responsible For Providing And Maintaining The Anti-viral Software And The Firewall On The Non-va Owned Oe. all Electronic Storage Media Used On Non-va Leased Or Non-va Owned It Equipment That Is Used To Store, Process, Or Access Va Information Must Be Handled In Adherence With Va Handbook 6500.1, Electronic Media Sanitization Upon: (i) Completion Or Termination Of The Contract Or (ii) Disposal Or Return Of The It Equipment By The Contractor/subcontractor Or Any Person Acting On Behalf Of The Contractor/subcontractor, Whichever Is Earlier. Media (hard Drives, Optical Disks, Cds, Back-up Tapes, Etc.) Used By The Contractors/subcontractors That Contain Va Information Must Be Returned To The Va For Sanitization Or Destruction Or The Contractor/subcontractor Must Self-certify That The Media Has Been Disposed Of Per 6500.1 Requirements. This Must Be Completed Within 30 Days Of Termination Of The Contract. bio-medical Devices And Other Equipment Or Systems Containing Media (hard Drives, Optical Disks, Etc.) With Va Sensitive Information Must Not Be Returned To The Vendor At The End Of Lease, For Trade-in, Or Other Purposes. The Options Are: vendor Must Accept The System Without The Drive; va S Initial Medical Device Purchase Includes A Spare Drive Which Must Be Installed In Place Of The Original Drive At Time Of Turn-in; Or va Must Reimburse The Company For Media At A Reasonable Open Market Replacement Cost At Time Of Purchase. due To The Highly Specialized And Sometimes Proprietary Hardware And Software Associated With Medical Equipment/systems, If It Is Not Possible For The Va To Retain The Hard Drive, Then; the Equipment Vendor Must Have An Existing Baa If The Device Being Traded In Has Sensitive Information Stored On It And Hard Drive(s) From The System Are Being Returned Physically Intact; And any Fixed Hard Drive On The Device Must Be Non-destructively Sanitized To The Greatest Extent Possible Without Negatively Impacting System Operation. Selective Clearing Down To Patient Data Folder Level Is Recommended Using Va Approved And Validated Overwriting Technologies/methods/tools. Applicable Media Sanitization Specifications Need To Be Pre- Approved And Described In The Purchase Order Or Contract. a Statement Needs To Be Signed By The Director (system Owner) That States That The Drive Could Not Be Removed And That (a) And (b) Controls Above Are In Place And Completed. The Iso Needs To Maintain The Documentation. security Incident Investigation the Term Security Incident Means An Event That Has, Or Could Have, Resulted In Unauthorized Access To, Loss Or Damage To Va Assets, Or Sensitive Information, Or An Action That Breaches Va Security Procedures. The Contractor/subcontractor Shall Immediately Notify The Cotr And Simultaneously, The Designated Iso And Privacy Officer For The Contract Of Any Known Or Suspected Security/privacy Incidents, Or Any Unauthorized Disclosure Of Sensitive Information, Including That Contained In System(s) To Which The Contractor/subcontractor Has Access. to The Extent Known By The Contractor/subcontractor, The Contractor/subcontractor S Notice To Va Shall Identify The Information Involved, The Circumstances Surrounding The Incident (including To Whom, How, When, And Where The Va Information Or Assets Were Placed At Risk Or Compromised), And Any Other Information That The Contractor/subcontractor Considers Relevant. with Respect To Unsecured Protected Health Information, The Business Associate Is Deemed To Have Discovered A Data Breach When The Business Associate Knew Or Should Have Known Of A Breach Of Such Information. Upon Discovery, The Business Associate Must Notify The Covered Entity Of The Breach. Notifications Need To Be Made In Accordance With The Executed Business Associate Agreement. in Instances Of Theft Or Break-in Or Other Criminal Activity, The Contractor/subcontractor Must Concurrently Report The Incident To The Appropriate Law Enforcement Entity (or Entities) Of Jurisdiction, Including The Va Oig And Security And Law Enforcement. The Contractor, Its Employees, And Its Subcontractors And Their Employees Shall Cooperate With Va And Any Law Enforcement Authority Responsible For The Investigation And Prosecution Of Any Possible Criminal Law Violation(s) Associated With Any Incident. The Contractor/subcontractor Shall Cooperate With Va In Any Civil Litigation To Recover Va Information, Obtain Monetary Or Other Compensation From A Third Party For Damages Arising From Any Incident, Or Obtain Injunctive Relief Against Any Third Party Arising From, Or Related To, The Incident. liquidated Damages For Data Breach consistent With The Requirements Of 38 U.s.c. §5725, A Contract May Require Access To Sensitive Personal Information. If So, The Contractor Is Liable To Va For Liquidated Damages In The Event Of A Data Breach Or Privacy Incident Involving Any Spi The Contractor/subcontractor Processes Or Maintains Under This Contract. the Contractor/subcontractor Shall Provide Notice To Va Of A Security Incident As Set Forth In The Security Incident Investigation Section Above. Upon Such Notification, Va Must Secure From A Non-department Entity Or The Va Office Of Inspector General An Independent Risk Analysis Of The Data Breach To Determine The Level Of Risk Associated With The Data Breach For The Potential Misuse Of Any Sensitive Personal Information Involved In The Data Breach. The Term 'data Breach' Means The Loss, Theft, Or Other Unauthorized Access, Or Any Access Other Than That Incidental To The Scope Of Employment, To Data Containing Sensitive Personal Information, In Electronic Or Printed Form, That Results In The Potential Compromise Of The Confidentiality Or Integrity Of The Data. Contractor Shall Fully Cooperate With The Entity Performing The Risk Analysis. Failure To Cooperate May Be Deemed A Material Breach And Grounds For Contract Termination. each Risk Analysis Shall Address All Relevant Information Concerning The Data Breach, Including The Following: nature Of The Event (loss, Theft, Unauthorized Access); description Of The Event, Including: date Of Occurrence; data Elements Involved, Including Any Pii, Such As Full Name, Social Security Number, Date Of Birth, Home Address, Account Number, Disability Code; number Of Individuals Affected Or Potentially Affected; names Of Individuals Or Groups Affected Or Potentially Affected; ease Of Logical Data Access To The Lost, Stolen Or Improperly Accessed Data In Light Of The Degree Of Protection For The Data, E.g., Unencrypted, Plain Text; amount Of Time The Data Has Been Out Of Va Control; the Likelihood That The Sensitive Personal Information Will Or Has Been Compromised (made Accessible To And Usable By Unauthorized Persons); known Misuses Of Data Containing Sensitive Personal Information, If Any; assessment Of The Potential Harm To The Affected Individuals; data Breach Analysis As Outlined In 6500.2 Handbook, Management Of Security And Privacy Incidents, As Appropriate; And whether Credit Protection Services May Assist Record Subjects In Avoiding Or Mitigating The Results Of Identity Theft Based On The Sensitive Personal Information That May Have Been Compromised. d. Based On The Determinations Of The Independent Risk Analysis, The Contractor Shall Be Responsible For Paying To The Va Liquidated Damages In The Amount Of $ Per Affected Individual To Cover The Cost Of Providing Credit Protection Services To Affected Individuals Consisting Of The Following: notification; one Year Of Credit Monitoring Services Consisting Of Automatic Daily Monitoring Of At Least 3 Relevant Credit Bureau Reports; data Breach Analysis; fraud Resolution Services, Including Writing Dispute Letters, Initiating Fraud Alerts And Credit Freezes, To Assist Affected Individuals To Bring Matters To Resolution; one Year Of Identity Theft Insurance With $20,000.00 Coverage At $0 Deductible; And necessary Legal Expenses The Subjects May Incur To Repair Falsified Or Damaged Credit Records, Histories, Or Financial Affairs. 8. Security Controls Compliance Testing on A Periodic Basis, Va, Including The Office Of Inspector General, Reserves The Right To Evaluate Any Or All Of The Security Controls And Privacy Practices Implemented By The Contractor Under The Clauses Contained Within The Contract. With 10 Working-day S Notice, At The Request Of The Government, The Contractor Must Fully Cooperate And Assist In A Government-sponsored Security Controls Assessment At Each Location Wherein Va Information Is Processed Or Stored, Or Information Systems Are Developed, Operated, Maintained, Or Used On Behalf Of Va, Including Those Initiated By The Office Of Inspector General. The Government May Conduct A Security Control Assessment On Shorter Notice (to Include Unannounced Assessments) As Determined By Va In The Event Of A Security Incident Or At Any Other Time. 9. Training a. All Contractor Employees And Subcontractor Employees Requiring Access To Va Information And Va Information Systems Shall Complete The Following Before Being Granted Access To Va Information And Its Systems: sign And Acknowledge (either Manually Or Electronically) Understanding Of And Responsibilities For Compliance With The Contractor Rules Of Behavior, Appendix E Relating To Access To Va Information And Information Systems; successfully Complete The Va Cyber Security Awareness And Rules Of Behavior training And Annually Complete Required Security Training; successfully Complete The Appropriate Va Privacy Training And Annually Complete Required Privacy Training; And successfully Complete Any Additional Cyber Security Or Privacy Training, As Required For Va Personnel With Equivalent Information System Access [to Be Defined By The Va Program Official And Provided To The Contracting Officer For Inclusion In The Solicitation Document E.g., Any Role-based Information Security Training Required In Accordance With Nist Special Publication 800-16, Information Technology Security Training Requirements.] b. The Contractor Shall Provide To The Contracting Officer And/or The Cotr A Copy Of The Training Certificates And Certification Of Signing The Contractor Rules Of Behavior For Each Applicable Employee Within 1 Week Of The Initiation Of The Contract And Annually Thereafter, As Required. c. Failure To Complete The Mandatory Annual Training And Sign The Rules Of Behavior Annually, Within The Timeframe Required, Is Grounds For Suspension Or Termination Of All Physical Or Electronic Access Privileges And Removal From Work On The Contract Until Such Time As The Training And Documents Are Complete.

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Scanner Bid No. Jch-24-698-b(rebid-2) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 6 9. Clarification And Amendment Of Bidding Documents …………………………… 6 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 6 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 7 13. Bid And Payment Currencies ……………………………………………………… 7 14. Bid Security ………………………………………………………………………. 7 15. Sealing And Marking Of Bids ……………………………………………………… 7 16. Deadline For Submission Of Bids …………………………………………………. 8 17. Opening And Preliminary Examination Of Bids ………………………………….. 8 18. Domestic Preference ……………………………………………………………… 8 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 8 20. Post-qualification ………………………………………………………………… 8 21. Signing Of The Contract …………………………………………………………… 8 Section Iii. Bid Data Sheet …………………………………………………..9 Section Iv. General Conditions Of Contract ……………………...………..10 1. Scope Of Contract ………………………………………………………………… 10 2. Advance Payment And Terms Of Payment ……………………………………….. 10 3. Performance Security ……………………………………………………………. 10 4. Inspection And Tests ……………………………………………………………… 10 5. Warranty …………………………………………………………………………. 10 6. Liability Of The Supplier ………………………………………………………….. 10 Section V. Special Conditions Of Contract ………………………………….11 Section Vi. Schedule Of Requirements ……………………………………....13 Section Vii. Technical Specifications …………………………………………14 Section Viii. Checklist Of Technical And Financial Documents …………..14 Section I. Invitation To Bid Purchase Of Scanner Bid No. Jch-24-698-b(rebid-2) 1. The Iloilo Provincial Government Through The Sb#4 2020 (co) Intends To Apply The Sum Of One Hundred Seventy-four Thousand Nine Hundred Sixty-nine Pesos (php174,969.00) Being The Abc To Payments Under The Contract For The Purchase Of Scanner. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On July 23,2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On N/a At 9:00 A.m. At Bac Secretariat, Iloilo Provincial Capitol And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before August 1,2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On August 1,,2024 At 9:01 A.m. At The 5th Floor, Bac Secretariat, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com/bac@iloilo.gov.ph Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com July 19,2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Scanner With Bid No. Jch-24-698-b(rebid-2). The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2020 In The Amount Of One Hundred Seventy-four Thousand Nine Hundred Sixty-nine Pesos (php174,969.00) 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [jesus M. Colmenares District Hospital-balasan,iloilo] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Jesus M. Colmenares District Hospital-balasan,iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Scanner 3 3 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Jch-24-698-b(rebid-2) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Scanner Scanner Type: Adf, Manual Feed, Duplex Scanning Speed (a4 Portrait): Simplex/duplex: 40ppm, Minimum Image Sensor: Cis X 2 (front X 1, Back X 1), Or Better Light Source: 3 Color Led (red/green/blue) Optical Resolution: 600dpi, Or Better Adf Capacity: 50 Sheets (a4, 80 G/m2 Or 20 Lb) Interface: Usb, Wifi, Minimum Lcd: 4.3 In. Color Tft Touch Screen, Or Wider Terms And Conditions Delivery Period 30 Days Upon Receipt Of Approved Notice To Proceed Warranty: One Year Parts And Services W/ Free Preventive Maintenance During Warranty Period ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope (m) Original Of Duly Signed And Accomplished Financial Bid Form; And (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description Quantity Unit Item Description 1 Unit Vacuum Forming Machine Item Specifications Sheet Size: 330 Mm X 250 Mm Maximum Sheet Thickness: 3.0 Mm Minimum Sheet Thickness: 0.2 Mm Forming Area: 280 Mm X 200 Mm Maximum Depth Draw: 200 Mm Dimensions: L400 X W335 X H405 Mm Weight: 9 Kg Standard Input Voltage: 100 V - 240 V Standard Frequency: 50, 60 Hz Standard Wattage: 1.32 Kw Noise Level: 65 Db Heater Temperature: Up To 250 Deg Celsius Inclusions: Plastic Sheets (10pcs) Desktop Computer Desk With Metal Frame And Wooden Top English Manual Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 1 Unit Uniit 3d Pellet Printer Item Specifications Print Technology: Dual Direct Drive Pellets, Independent Extruder Build Volume: At Least 290 X 185 X 200 Mm (minimum) Dual Printing: At Least 280 X 165 X 200 Mm (minimum) Mirror Printing: At Least 147 X 185 X 200 Mm (minimum) Print Capability: Mirror Printing, Dual Printing Pellet Diameter: 3 - 5 Mm Layer Resolution: 10μm Extruder Maximum Temperature: 300º C Build Plate Leveling: Semi- Automatic -manual Nozzle Diameter (mm): Direct Drive Hr: 0.15 - 0.25 - 0.4 - 0.6 - 0.8 Mm Pellet: 0.4 - 0.6 - 0.8 - 2.0 - 4.0 - 5.0 Mm Connectivity: Usb, Wifi, Sd Card Display : 5" Color Touch Screen Control Devices: Pc, Tablet, Smartphone Control Mode: Web Direct Drive: Abs, Asa, Nylon, Pet-g, Pla, Pp, Tpu, Pla-3d870, Pva Pellets: Pla, Abs, Petg, A93, Wood, Abs+cf, Pc, Hdpe, Ultem, Peek Slicing Software Included: Professional Software 1 Unit Print Bed 1 Set Starter Material Dimensions: 550mm X 440mm X 460mm Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 1 1 1 Unit Nit 1 Unit Polyetheretherketone (peek) 3d Printer Item Specifications Printing Technology: Fused Filament Fabrication (fff) Extruder: Single Extruder Diameter: Swappable 0.25, 0.4, 0.6 And 0.8mm Nozzle, Default 0.4mm Layer Resolution: 0.05-0.4mm Position Accuracy: Xy:0.025mm, Z:0.0025mm Print Speed: 30-200mm/s Filament Diameter: 1.75mm Build Platform: Pi + Glass Ceramics Supported Filament: Peek, Pekk, Pei, Ppsu, Abs, Pc, Nylon, Carbon Fiber-filled, Petg, Pva, Pla, Tpu, Hips, Woodfill, Metalfill, Etc. Language: Chinese & English User Interface Features: Full-color Touch Screen Connectivity: Sd Card, Usb Camera: Yes Power Failure Recovery: Yes Filament Absent Warning: Yes Build Plate Leveling: Auto Leveling, Manual Leveling Build Volume: 10.3"*10.3"*10.3"(260*260*260mm) Dimensions: 530*490*645mm Weight: 46kg Heated-plate Temperature (max): 160°c Extruder Temperature (max): 450°c Heated Chamber (max): 90°c Software: Appropriate 3d Printing Slicing Software; Compatible Software: Simplify3d & Cura Input Supported File Type: .stl, .obj, .obj, .x3d Output Supported File Type: Gcode Operating Environment: Temperature: 15°c To 32°c Humidity: 30% To 70% Storage Environment Temperature: 0°c To 54°c Humidity: 10% To 85% Material Storage Environment Temperature: 13°c To 24°c Humidity: 20% To 50% Voltage Input: 100~120vac (110v Version Only, Refer To The Nameplate) 200~240vac (220v Version Only, Refer To The Nameplate) 47~63hz Power: 1200w Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Professional Image Processing Software (segmentation, Analysis And Simulation) Item Specifications An Image Processing Software That Allows The User To Import, Visualize And Segment Medical Images (such As Images From A Ct Or Mri Scanner). Users Can Check And Correct The Segmentations And Create Digital 3d Models. The Models Can Then Be Used For Measuring, Treatment Planning And Producing An Output File To Be Used For Additive Manufacturing (3d Printing). A Software That Combines Cad Tools With Pre-processing (meshing) Capabilities. It Should Work On Triangulated (stl) Files Which Makes It Suitable For Freeform 3d Data, Like The Anatomical Data Coming From The Segmentation Of Medical Images. The Software May Be Used To Import Anatomical Data And Other 3d Objects In Stl Format. Once Objects Have Been Loaded, They Can Be Used For Many Applications Including Measuring, Designing, Modeling And 3d Printing. The Software Should Allow For Thorough 3d Measurements, Analyses, Surgical Planning And More. 1.base Functionality • Importing Medical Images In Dicom Format And Other Formats (bmp, Tiff, Jpg And Raw Images) • Viewing Images And Dicom Data • Selecting A Region Of Interest Using Generic Segmentation Tools • Verifying And Editing A Region Of Interest • Calculating A Digital 3d Model And Editing The Model • Measuring On Images And 3d Models • Exporting Images, Measurements, And 3d Models To Third-party Package 1.1 Base: Image Import Load And Process Stacks Of 2d Images From Several Formats Including Dicom 3.0 Format, Bmp, Tiff, Jpg And Raw Images. The Data Is Loaded And Then Stored In A File Format (original Input Images Are Not Modified). Both During And After Import, The User Can Inspect Not Only The Images But Also Associated Dicom Data (if Present In The Image Files). The Software Should Represent And Visualize The Images As Either Gray Values Or Hounsfield Units. Ct Images Are Always Calibrated Based On The Hounsfield Units, With The Intensity Of Water Being 0. Background Air Typically Has A Value Of –1000. The User Can Choose (as A Preference) To Offset The Units By 1000 To Obtain Positive Values In The Range Of 0 To 4095. 1.2 Base: Visualization After Import, The Images Should Be Displayed: The Original Scanner Images Together With The Two Orthogonal Sections. In The Case Of Axial Images, The Coronal And Sagittal Sections Are Created. The Software Should Offer Features And Settings To Control Image Visualization, Including The Following: • Rotate, Pan, And Zoom • Fit To Screen / Full Screen • Reslice Images • Fluoroscopy Simulation • Contrast And Brightness • Interpolation Of Images • Viewing Direction • Image Filters • Alignment Image • Scatter Removal Filter • Pseudo Color Visualization • Image Layouts • Navigation. • Cine Loop For 4d Datasets • Overlay While The Above Part Applies To Visualization On The 2d Images, Features And Settings Related To Visualization In 3d Include The Following: • 3d Preview • 3d Rendering And Shading • Contour Visualization • Transparency • Clipping • Colors 1.3 Base: Measurement Tools Tools To Measure Distances (in Mm), Angles (in Degrees), Etc., As Specified Below. Measurements To Be Displayed With 4 Digits Behind The Decimal Point, However Accuracy Of Measurements Is Inherently Limited By The Pixel Size Of The Images. Measurements Can Be Performed Either On The 2d Images Or In The 3d Workspace. Supported Measurements Include: • Distance, Angle, Radius, Length, And Diameter Measurements • Minimal Distance Over Surface • Measure Ellipse And Area • Centerline Measurements • Profile Line • 3d Histogram • Intensity Monitoring • Intensity Measurement In Region Of Interest 1.4 Base: Segmentation Tools Tools To Produce A Binary ‘mask’ As Output, Representing The Region Of Interest. A Mask Defines For Each Voxel In The Image Data Whether It Is Part Of The Region Of Interest Or Not. Note That The Original Images Are Visualized Together With The Segmentation Results, No Original Information Is Lost Or Hidden. Multiple Different Segmentation Objects (masks) Can Be Made In One Session. Visualization Of One Or Multiple Masks Can Be Done In 2d As Well As In 3d Using Specific Colors. The Generic Segmentation Tools Required: • Global And Local Thresholding • Region Growing • Dynamic Region Growing • Segmentation By Livewire • Manual Editing (‘edit Mask’) • Cavity Fill • Smooth Mask • Smart Fill And Smart Brush • Morphology Operations • Boolean Operations • Multiple Slice Edit And 3d Interpolate • Split Mask • Mask Properties • Compare Masks • Segment Thin Bone • Segment Vessel • Label • Tracing Thin Structures • Ct Bone Wizard • Calculate Part (from Mask) • Calculate Mask From Object 1.5 Base: 3d Editing Tools After 3d Objects (stl Objects) Are Created, The Software Should Support The Editing Of Those Objects. Supported Operations Include: • Edit Contours • Smooth, Wrap And Reduce • Mirror, Transform And Boolean 1.6 Base: Export Tools Export Capabilities: • Project To Dicom • Image To Dicom • Dicom Tags • Bmp/jpeg • 3d View To Dicom • 360 View To Dicom • 2d Mask Area • Grayvalues • 3d Parts (binary Stl, Ascii Stl, Dicom Encapsulated Stl, Dicom Sso, Mgx, Dxf, 3mf, Dicom Encapsulated Obj, Wavefront Obj, Vrml 2.0, Ply, Point Cloud) • Txt And Cloud (share) • Media (print, Save Screenshot, Capture Movie) 1.7 Base: Other Tools • Registration Tools: Allows Registering Imported 3d Models Onto 3d Models Created In Different Image Datasets. • Anonymize Images: Anonymize The Dicom Tags From The Imported Images. • Project Metadata: Define Any Custom-defined Metadata And Store It Inside The Project. The Tool Allows To Add, Modify, And Delete Metadata. • Run Matlab Script: Run Custom Matlab Script On Some Of The Objects In The Project. • Reporting Tools: Printing, Save Screenshot, Capture Movie 2. Analysis Functionality Users Should Be Able To Indicate Landmarks And Annotate And To Construct Geometrical Entities Or ‘analytical Primitives’ (points, Lines, Planes, Circles, Cylinders, Spheres, Splines, Centerlines), Which Can Serve To Indicate Anatomical Landmarks, Anatomical Axes, Anatomical Planes, Or Planned Resection Planes, Etc. These Geometrical Entities Can Be Created By Drawing, By Fitting, By Entering Coordinates, Radius, And Vectors, Or By Creation Of Entities Based On Previously Created Entities Using A Few Predefined Creation Methods (‘create Primitives’ Tool). On The Images And 3d Models, Polylines Can Also Be Grown. The Created Entities Can Be Exported To A Cad System In Iges Format. Users Should Be Able To Perform Advanced Measurements, Advanced Measurements Based On Centerlines And Splines, Wall Thickness Analysis, Part Comparison Analysis, Curvature Analysis, Distance To Curve Analysis, Distance To Curve Over Surface Analysis, Midplane Thickness Analysis, Extrema Analysis, Self-supporting Analysis & Collision Detection. 3. Simulation Functionality Users Should Be Able To Evaluate The Patient’s Anatomy, Performing Measurements, And Planning Osteotomies And Distractions In 3d. The Software Should Have A Tool That Supports 3d Cephalometry And Allows The User To Perform Several Standard Analyses (templates) Listed In A Library. Each Analysis Lists The Landmarks That Need To Be Defined. Planes And Measurements Are Indicated Automatically If You Have Defined All The Necessary Landmarks. Landmarks Can Be Placed In 2d And 3d. New Analyses Can Be Created And Saved, And Points And Planes Can Be Imported From Other Existing Cephalometric Analyses. The Software Should Also Offer A 3d Environment For Planning Certain Surgical Steps Like Cuts Etc. Osteotomies And Distractions Are Implemented (a Distractor Can Be Chosen Out Of An Available Distractor Library). Attention To Be Paid To The User-friendliness Of The Software: A Wizard Guides The User Through The Steps Needed To Achieve Bone Repositioning. • Select Osteotomy Or Distraction: Choose Osteotomy (lefort 1, Lefort 2, Lefort 3, Ramus Lengthening, Bilateral Sagittal Split, Simple Plane, Freeform) • Choose Distraction (alveolar Distraction, Unilateral And Bilateral Ramus Lengthening, Maxillary) • Define The Necessary Landmarks: Automatic Placement Of The Cutting Path, And Possibility To Adjust The Suggested Position Cutting Path • Cut And Split The Chosen Object • Reposition The Created New Part To Desired Location During The Planning Process, The Objects And Distractors Should Be Seen In 3d As Well As In 2d. All Positions Of The Moved Parts Can Be Saved, And It Is Possible At Each Stage To Return To The Home Position. It Should Be Possible To Compare And Analyze The Virtual Pre- And Post-operative Positions. Apart From The Osteotomy Wizard, The User Should Be Able To Plan Resections By Means Of Various ‘cut’ Tools (planar Cut, Etc). The ‘soft Tissue’ Feature Can Assist The User In Assessing A Possible Outcome By Using A Biomechanical Model. The Result Is To Be Visualized In 3d As A Computer Animation. 4. Cloud-based Communication Platform An Online Platform To Upload And Share Software Project Files With Different Users, Allowing Easy Navigation In The Medical Images And 3d Files As Well As Basic Line Drawings, Measurements, And Annotations. The Following Should Be Possible: • Upload A Case And Share With Different Collaborators • View Cases In The 3d Viewer Within The Browser O 3d View Manipulation O Image View (contrast Change, Multiplanar Reconstruction, Enlarging View And More) O Custom Views O Indication Tools O Measurement Tools O Section Tool O Fly-through Tool To View Inside A Structure Along The Centerline • Case Comments • Case Management • Institution Account Management • User Management 4.1 Automatic Segmentation Capabilities Software Package Should Have Complimentary Access To Ai-enabled Automatic Segmentation Algorithms That Were Designed To Perform Segmentation Without Human Intervention At The Initial Stage: • Cmf Cbct Segmentation • Cmf Ct Segmentation • Heart Ct Segmentation • Knee Ct Segmentation • Knee Mri Segmentation • Shoulder Ct Segmentation • Hip Ct Segmentation • Torso Ct Segmentation • Ankle Ct Segmentation • Bone Ct Segmentation Training: - Includes Training For At Least 4 Faculty Members / Staff. - Training Period Is 1 Full Day High-end Desktop Pc Item Specifications Processor 13th Generation Core™ I7-13700kf Processor (e-cores Up To 4.20 Ghz P-cores Up To 5.30 Ghz) Operating System: Latest Proprietary Operating System Graphic Card: 16gb Gddr6x Memory: 32 Gb Ddr5-5200mhz (udimm) - (2 X 8 Gb) Storage: 512 Gb Ssd M.2 2280 Pcie Gen4 Performance Tlc Cooling System: 150w 120mm Air Cooling + 1 X Rear + 3 X Front + 2 X Top With Argb Fan Pointing Device: Usb Optical Mouse Keyboard: Usb, Calliope, Black - English (us) Wifi Wireless Lan Adapters Wi-fi 6e 2x2 Ax & Bluetooth® 5.1 Or Above Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Desktop Pcs For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 4 1 Units 1 Unit High Speed 3d Printer Item Specifications Technology: Fused Deposition Modelling (fdm) / Fused Filament Fabrication (fff) Product Dimensions: 355x355x482mm Package Dimensions: 428x428x567mm Net Weight: 12.4kg Gross Weight: 16kg Display Screen: 4.3" Color Touch Screen Rated Input Voltage 100-0240v~, 50/60hz Output Voltage: 24vdc Rated Power: 350w Printing Technology: Fdm Build Volume: 220x220x250mm Printing Accuracy: 100mm+-0.1mm Layer Height: 0.1-0.35mm Typical Printing Speed 300mm/s Max. Printing Speed: 600mm/s Acceleration: 20000mm/s2 Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm (standard) Nozzle Temperature: 300c Build Surface: Pei Flexible Build Dimensions: 139.76" X 139.76" X 188.98" Inclusions: Industrial-grade Adjustable Shelves 4 Layers (only 1 Shelf For The 4 Units) English Manual Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pcs For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 3 1 Units Unit Unit Multi-color Fdm 3d Printer Item Specifications Technology: Fused Deposition Modelling (fdm) / Fused Filament Fabrication (fff) Build Volume (w×d×h) 256 × 256 × 256 Mm³ Nozzle 0.4 Mm Hardened Steel Included Hotend All-metal Max Hot End Temperature 300 ℃ Filament Diameter 1.75 Mm Supported Filament Pla, Petg, Tpu, Abs, Asa, Pva, Pet Ideal For Pa, Pc, Carbon/ Glass Fiber Reinforced Polymer Build Plate Surface Bambu Cool Plate, Bambu Engineering Plate Included Max Build Plate Temperature 110℃@220v, 120℃@110v Max Speed Of Tool Head 500 Mm/s Max Acceleration Of Tool Head 20 M/s² Physical Dimensions 389 × 389 × 457 Mm³, Package Size 480 × 480 × 590 Mm³, Net Weight 14.13 Kg, Gross Weight(ams Included) 22.3 Kg Electrical Requirements 100-240 Vac, 50/60 H, 1000w@220v, 350w@110v Inclusions: Industrial-grade Adjustable Shelves 4 Layers Layers (only 1 Shelf For The 3 Units) English Manual Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 60-seat Premium 3d Cad Software With Initial 4 Years Subscription Services Item Specifications - Premium (3d Cad Software) - Simulation Premium (fea Tools) - Flow Simulation (cfd Tools) - Motion (kinematics Analysis) - Plastics (part And Mold Filling Analysis) - Sustainability (environmental Impact Tools) - Electrical Professional (electrical Systems Design Tools) - Model Base Definition (define, Organize, And Publish 3d Pmi) - Visualize (develop Rich, Photo-quality Content) - Computer Aided Manufacturing Supports For Education Edition Includes: - Complete Curriculum, Including A Teacher Guide And Student Guide That Makes Teaching Easier At Every Level. - Extensive Interactive Courseware Projects - Access To Online Educational Community, Plus Our Library Of Articles, Tutorials, Product Resources, And More. - Free Access To Customer Portal. - Free Updates And Upgrade To Latest Version. - Free Installation Assistance. Training: - Includes Training For 5 Faculty Members / Staff. - Training Period Is 4 Full Days - Lunch Is Included Terms And Conditions: 1. Warranty: Technical Support During Subscription 2. Delivery Period: Within 90 Working Days 3. All Prices Quoted Are Subject To Change W/o Prior Notice 1 Unit Professional Desktop Fused Deposition Modelling/fused Filament Fabrication 3d Printer Item Specifications Technology: Fused Deposition Modelling (fdm) / Fused Filament Fabrication (fff) Dimensions Build Volume 330 X 240 X 300 Mm (13 X 9.4 X 11.8 Inches) Assembled Dimensions: W 495 X D 585 X H 780 Mm (w 19.5 X D 23 X H 30.7 Inches) Print Technology: Fused Deposition Modeling (fdm) Compatible Filament Diameter: 2.85 Mm Weight: 29.1 Kg (64.2 Lbs) Maximum Power Output: 500 W Printer Properties Layer Resolution: 0.25 Mm Nozzle: 150 - 60 Micron 0.4 Mm Nozzle: 200 - 20 Micron 0.6 Mm Nozzle: 300 - 20 Micron 0.8 Mm Nozzle: 600 - 20 Micron Xyz Resolution: 6.9, 6.9, 2.5 Micron Feeder Type: Dual-geared Feeder, Reinforced For Composite Materials Display: 4.7-inch (11.9 Cm) Color Touchscreen Print Core Replacement: Swappable Print Cores Print Head: Dual Extrusion Print Head With An Auto-nozzle Lifting System, Swappable Print Cores, And Flood Detection. Nozzle Diameters: 0.25 Mm, 0.4 Mm, 0.6 Mm, 0.8 Mm Operation Parameters Nozzle Temperature 180 - 280 °c Nozzle Heat-up Time: < 2 Minutes Operating Sound: < 51 Dba Build Plate Leveling: Advanced Active Leveling Build Plate: Glass Build Plate Build Plate Heat-up Time: < 5 Minutes (from 20 To 60 °c) Operating Ambient Temperature: 15 - 32 °c (59 - 90 °f) Non-operating Temperature: 0 - 32 °c (32 - 90 °f) Ecosystem: Supplied Free Software - Appropriate Slicing Software - Appropriate Printer Management Software Essential Software – Enterprise-grade Online Software Tools Supported Os: All Leading Industry Os Plugin Integration: All Leading Professional Cad Software Supported File Types: Stl, Obj, X3d, 3mf, Bmp, Gif, Jpg, Png Printable Formats: G, Gcode, Gcode.gz, Ufp File Transfter: Wi-fi (2.4 Ghz), Ethernet, Usb Safety And Compliance Certification: Ce, Fcc, Vpat, Rohs, Reach, Cb, Bis, Kc, Pse, Rcm, Srrc, Mic, Ncc, Safe Unattended Professional Use Security Certification: Iso/iec 27001 Certified (https://support.makerbot.com/s/article/1667411337398) Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Food 3d Printer Item Specifications Single Syringe With 100 Cubic Centimeters Volume (cc) Capacity Print Area: Up To 220 X 195 X 170 Mm Syringe And Printbed Heating Automatic Calibration Dimensions: 510 X 420 X 700 Mm Smarter Control And Monitoring With Touch Screen And Webcam. The Touchscreen Is Intuitively Designed For An Excellent User Experience. The Webcam Gives You The Freedom To Keep An Eye On Your Print Job If You Need To Step Away Motorized Syringe For More Accurate And Controlled Paste Flow Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Printed Circuit Board (pcb) Printer Item Specifications Printing Specifications Minimum Trace Width 0.2 Mm Minimum Passive Size 1005 Minimum Pin-to-pin Pitch (conductive Ink) 0.8 Mml Minimum Pin-to-pin Pitch (solder Paste) 0.5 Mml Resistivity 12 Mω/sq @ 70 Um Height Substrate Material Fr4 Maximum Board Thickness 3 Mm Soldering Specifications Solder Paste Alloy Sn42/bi57.6/ag0.4 Solder Wire Alloy Snbiag1 Soldering Iron Temperature 180-210 °c Print Bed Print Area 135 X 113.5 Mm Max. Heated Bed Temperature 240 °c Heated Bed Ramp Rate ~2°c/s Footprint Dimensions: 390 X 257 X 207 Mm (l X W X H) Weight 7 Kg Computing Requirements Compatible Operating Systems Latest Proprietary Operating System Compatible File Format Gerber Connection Type Wired Usb Certification En 61326-1:2013 Emc Requirements Iec 61010-1 Safety Requirements Ce Marking Affixed To The Printers Delivered To European Customers Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 1 Unit T Computer Numerical Control (cnc) Router Item Specifications X Axis Travel 23.81" (605mm) Y Axis Travel = 47.63" (1210mm) Z Axis Travel 3.937" (100mm) Table Work Area = 28.4" X 61" Electro Spindle 800w (1hp) Includes Collets 1/4" & 1/8" Spindle Speed 0-24,000 Rpm Rapid Feed Rate 150 Ipm (3.81 Mpm) Precision Linear Guideway X/y/z Precision Ball Screw X/y/z Ball Screw Diameter 16mm Resolution +/- .00589" (0.15mm) Power Requirements 115v, 50~60hz, 13a, 1-phase (canada 220v, 7a) Working Table High Rigidity Aluminum Extrusion Gantry Bridge High Rigidity Aluminum Extrusion Gantry Supports Aluminum Billet Machined Max Gantry Clearance 5 1/2" (139.0mm) Gantry Clearance Above Spoil Brds 4 1/2" (114.3mm) Machine Base All Welded Steel Frame Machine Dimensions = 62"l X 35"w X 28"h Shipping Dimensions = 65" X 38" X 21" Machine Weight = 242 Lbs Tool Touch Off Included Controller Richauto B11 Dsp Cnc Motion Control System Usb Port For Easy File Transfer Inclusions: English Manual Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 1 1 Unit Unit 3d Scanner Item Specifications Scanner Type: Handheld With Built-in Touchscreen Interface Description: Hand-held 3d Scanner Meant To Capture (from 30cm To 10m In Length). With Built-in Touchscreen For Ease-of-use During Scanning. 3d Point Accuracy : 0.1 Mm Or Better 3d Resolution : 0.6 Mm Or Better Depth Of View : At Least 55-95 Cm Field Of View: At Least 280 X 360 Mm (min.) To 490 X 650 Mm (max.) 3d Light Source: White Led Texture Resolution: 2.3 Mp Frame Rate : 35 Fps Or Better Data Acquisition Speed : At Least 3m Points /sec Multi Core Processing: Yes 3d Formats: Obj, Ply, Stl, Etc. Interface: Built In Touchscreen - 4 Inches Or Bigger Tracking Modes: Geometry, Markers, Texture Capable Of Scanning: Black Surfaces, Glossy Objects, Sharp Edges, Human Hair Dimensions: At Least 165 × 85 × 274 Mm Or Equivalent Software: Include License Operating Software That Can Fill Holes, Simplify The Mesh, Apply Texture. - Calibration Board - Magnetic Marker - Usb Cable - Appropriate Software - Carry Case Inclusions: English Manual Safety Box With Security Lock (using Key And Pin Code) Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service High-end Laptop Item Specifications Operating System: Latest Proprietary Operating System Processor: Core I7-10750h Processor 2.60 Ghz 12m Cache, Up To 5.00 Ghz Graphics: Gtx 1660 Ti 6gb Gddr6 Vram Memory: 16gb Ddr4 Up To 3200mhz Sdram Support Up To 48gb Storage: 1tb Ssd Display: 15.6-inch Full Hd 12 Months Warranty For Parts And Service Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair 1 1 1 Unit Unit Unit Large Format Printer And Cutter Item Specifications Printing Method: Piezo Ink-jet Method Width: 11.7 To 54 In. (297 To 1,371 Mm) Thickness: Max. 39.3 Ml (1.0 Mm) With Liner, For Printing Max. 15.7 Ml (0.4 Mm) With Liner And 8.6 Ml (0.22 Mm) Without Liner, For Cutting Media Roll Outer Diameter: Max. 9.8 In. (250 Mm) Media Roll Weight: Max. 77 Lb. (35 Kg) Media Core Diameter: 3 In. (76.2 Mm) Or 2 In. (50.8 Mm) Printing/cutting Width (*1): Max. 52.9 In. (1,346 Mm) Printing Resolution (dots Per Inch): Max. 1,200 Dpi Cutting Speed:0.39 To 11.8 In/s (10 To 300 Mm/s) Blade Force (*2): 30 To 500 Gf Software Resolution (when Cutting): 0.98 Ml/step (0.025 Mm/step) Dimensions: At Least 103.7 In. X 29.5 In. X 52.0 In. (2,632 Mm X 748 Mm X 1,320 Mm) Media Heating System (*3): Print Heater Set Temperature: 86 To 113 (°f 30 To 45 °c) Dryer Set Temperature: 86 To 131 °f (30 To 55 °c) Connectivity: Ethernet Power-saving Function: Automatic Sleep Feature Rated Input: 100-120/220-240 Va.c. 50/60 Hz 8.0/4.1 A 8 Liters Ink (cmyk) - 1l Per Color 1 Pc Cleaning Solution 1 Pc Avr 2kva 1 Rolls Generic Sticker Dedicated Stands, Power Cord, Media Holders, Replacement Blade For Separating Knife, Drain Bottle, User's Manual, Software Inclusions: English Manual Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Usb Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair Graphing Software Item Specifications - Engineering Graphing Software - Capable Of The Ff: - Linear And Polynomial Fitting - Nonlinear Fitting - Peak Analysis - Descriptive Statistics - Hypothesis Testing - Nonparametric Tests - Multivariate Analysis - Power And Sample Size - Roc Curve - Signal Analysis (smoothing And Filtering, Fast Fourier Transform) - Matematics (simple Math Operations, Interpolation, Extrapolation, Area Calculation) - Graphing (2d Graphing, 3d Graphing) - Curve Fitting - Graph Customization - Data Processing - Etc 1 Unit Digital Embroidery Item Specifications Can Embroider Using Digital Designs Basic Features Accessory Storage Yes Adjustable Screen Brightness No Automatic Thread Cutter Yes Built-in Languages Yes Built-in Memory Yes Included Accessory Feet Button Fitting Foot, Zipper Foot, Overcasting Foot, Blindstich Foot, Monogramming Foot, Zigzag Foot, Embroidery Foot Needle Position Key (up/down) Yes Needle Threading System Advanced Number Of Presser Feet 8 Presser Foot Leveling Yes Quick Set Bobbin Yes Start/stop Button Yes Thread Sensor On/off No Wide Table Included No Wireless Enabled Yes Dimensions Carton Dimensions (w" X D" X H") 16.500 " X 21.000 " X 15.750 " Carton Weight (lbs) 26.700 Unit Dimensions (w" X D" X H") 7.76" X 16.50" X 12.09" Unit Weight (lbs) 15.06 Embroidering Built-in Designs 135 Built-in Embroidery Lettering Alphabet Fonts 10 Embroidery Position Marker No Maximum Embroidery Area 4" X 4" Sewing Automatic Height Adjustment (aha) No Built-in Lettering Fonts 10 Built-in Stitch Selections (stitches) 103 Button Hole Styles 10 Independent Bobbin Winding Motor No Knee Lifter No Maximum Sewing Speed (stitches Per Minute) 710 Pivot Function No Speed Control Yes Carton Contents: Zigzag Foot “j” (on Machine), Monogramming Foot “n”, Overcasting Foot “g”, Zipper Foot “i”, Blind Stitch Foot “r”, Button Fitting Foot “m”, Buttonhole Foot “a”, Embroidery Foot “q”, Needle Set, Twin Needle, Bobbin (2) (one Bobbin Is On Machine), Pre- Wound Bobbin (3) (60 Weight White Embroidery Bobbin Thread), Bobbin Clip (4), Seam Ripper, Scissors, Cleaning Brush, Eyelet Punch, Screwdriver, Disc-shaped Screwdriver, Extra Spool Pin, Spool Cap (large), Spool Cap (medium) (on Machine), Spool Cap (small), Thread Spool Insert (mini King Thread Spool), Spool Net, Bobbin Case (on Machine), Foot Controller, Embroidery Frame Set (medium), 10 Cm (h) × 10 Cm (w) (4 Inches (h) × 4 Inches (w)), Accessory Bag, Dust Cover, Operation Manual, Quick Reference Guide, Embroidery Design Guide Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Flatbed Uv Printer With Initial Consumables, And Other Peripherals Item Specifications Can Print Directly On Solid Materials Such As Woods, Plastics, Metals, Rubber, Leather, Glass, And More Printer Technology: Drop-on-demand Micro Piezo Inkjet Technology Description: Print Quality On A Wide Variety Of Solid Materials And Objects Including Abs, Alu-board, Pc, Pet, Pmma (acrylic), Ps, Pvc, Etc. Application: Prototypes, Personalised Gifts, Packaging, Souvenirs, Awards, Specialty Industrial Items As Well As Labels, Decals, Signs, Etc. Print Head: 1 Max. Media Size: At Least 483 Mm (19") X 594 Mm (23.4”) Max. Media Thickness: At Least 150 Mm (5.9") Max. Print Area: At Least 473 Mm (18,6”) X 584 Mm (23") Media Drying System: Long-life Led-uv Curing Lamp Vacuum System: Standard Integrated - Electronically Adjustable Hold-down Strength No. Of Ink Slot: 6 Ink Type: Led-uv Ink Ink Colors: Kcmy, White+ Varnish Print Resolutions: 1440/1080/720dpi Interface: Ethernet Power Supply: Ac 100-240v - 50/60hz±1hz Power Consumption Operating Status: 300w Or Less Machine Measurements (w) X (d) X (h) : 1188 X 1533.6 X 604.3 Mm (46.8"x 60.4" X 23.8") Rotary Cmyk Uv Ink User Manual Avr Software Inclusions: Consumables: 1 Set Cmyk + White And Varnish Peripherals Or Machine Parts: Vacuum Table, Led Pointer, Front Cover, Plus Rotary Attachment Machine Software English Manual Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Garment / T-shirt Printer Prints Directly On Fabrics And Textiles Specifications: Printing Technology: Advanced Inkjet Technology Nozzle Configuration : At Least 3,200 Nozzles Maximum Print Resolution: 2400 X 1200 Dpi Print Speed: Production (2 Pass), For Fabric: Up To 62sec / 21m2 (600 X 1200 Dpi) Production (7 Pass): For Fabric & Rigid: Up To 208sec / 7.5m2 (1200 X 1200 Dpi) Production (12 Pass), For Fabric & Rigid: Up To 350sec / 4.5m2 (2400 X 1200 Dpi) Ink Colours: Cyan, Magenta, Yellow, Black Ink Capacity: 140ml Dimensions: 97cm 81.1cm X 24.5cm Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Co2 Laser Cutter / Engraver Item Specifications Mechanics Work Surface Area: At Least 1290 X 990 Mm Dimension: 1850 X 1500 X 1100 Mm Or Equivalent Cutting Speed: At Least 30000 Mm/min Engraving Speed: At Least 60000 Mm/min Laser Type: Co2 Laser Tube Laser Power Included: Up To 100watts Focus Lens: At Least 2.0 In Standard Resolution Ratio: At Least 0.025 Mm Repositioning Accuracy: At Least '+/- 10% Operating Humidity: 5%-80% Graphic Format Supported: Bmp,gif,jpeg,unitx,tga,tiff,plt,cdr,dwg,dxf Software Compatibility: Coreldraw, Photoshop, Autocad, Tajima , Cam/cad Cooling Method: Water Cooling (chiller Included) Materials Compatibility: Acrylic, Wood, Fabric, Cardboard, Paper, Synthetic Granite, Natural Granite, Leather, Foam Board, Glass Extendable Size: Front And Back Of Laser Machine Can Be Opened Suitable For Super Length Material Process Power Requirements: 220v, 50hz/60hz Package Inclusions: 1 Unit Spare Lens 2 Units Spare Mirror 1 Unit Air Compressor 1 Unit Chiller 1 Set Starter Consumable Other Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Duplicator Item Specifications A3 Size Paper B4 Size Output Master Making Method: Thermal Digital Master Making Interval: 23 Seconds (a4.100%) Resolution: Scan (input) Resolution: 300x360 Dpi Print (output) Resolution: 300x600 Dpi Scanning Method: Adf Scanner Document Feeder Document Weight: 45-210gsm 17-34lbs (bond) Document Capacity: 1 Sheet Printing Method: Stencil Print Document Type: Sheet, Book (max) Document Size: Max: 297mmx420mm Min: 100x148mm Image Area: Max: 250x355mm Feeding Capacity: 1,300sheets (64gsm) Stacker Capacity: 1,300sheets (64gsm) Paper Size: Max: 297x420mm Min: 100x148mm Paper Weight: 42-210gsm Print Speed: 60ppm/130ppm (3steps) Zoom: 50-200% Preset Reduction/enlargement: 57, 70, 81, 86, 94, 115, 122, 141, 173% Margin: X94% Registration Adjustment: Vertical ±15mm And Horizontal ±15mm Other Function: Ink Save Mode, Multiple Exposure (2, 4, 8, & 16-up, 2in1), Confidential Safeguard, 90, 180 Degree Rotation, Master Re-make (save The Data From Last Master Making), Repeat Counter, Pre-print, Interval Print (2 Mode, By Time Specified), Print Per Set/prints Per Document Program, Energy Save Mode(lcd / Back Light Turned Off /sleep Led), Ink Replenishing Mode, Auto- Reset, Online Print (usb 2.0), Double Feed Detection. Power Source: 100-240v, 50/60hz, 1.6-0.8a/ Max Speed Printing - Max. 135wenergy Save Mode -min. 10.2w Dimensions: 1,290mm X 620mm X 1165mm Inclusions: • Price Is Vat Inc • Including The Delivery Fee • Free Lifetime Service Warranty • Ink Starter Set • 1 Year Standard Warranty On Parts • Desktop Computer Desk With Metal Frame And Wooden Top • Swivel Chair • Cabinet For Accessories, Supplies And Materials Should Also Include Additional: One (1) Black Ink: (600 Cc) 10,000-15,000 Copies One (1) Master Stencil Roll: (200 Cuts/roll) Per Cut Yield 10,000 - 15,000 Copies

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Scanner Bid No. Jch-24-698-b(rebid) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid……………………………………………………..3 Section Ii. Instructions To Bidders………………………………………..…...5 1. Scope Of Bid ………………………………………………………………………. 5 2. Funding Information………………………………………………………………. 5 3. Bidding Requirements ……………………………………………………………. 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders…………………………………………………………………… 5 6. Origin Of Goods ………………………………………………………………….. 6 7. Subcontracts ……………………………………………………………………… 6 8. Pre-bid Conference ………………………………………………………………. 6 9. Clarification And Amendment Of Bidding Documents …………………………… 6 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 6 11. Documents Comprising The Bid: Financial Component …………………………... 7 12. Bid Prices …………………………………………………………………………. 7 13. Bid And Payment Currencies ……………………………………………………… 7 14. Bid Security ………………………………………………………………………. 7 15. Sealing And Marking Of Bids ……………………………………………………… 7 16. Deadline For Submission Of Bids …………………………………………………. 8 17. Opening And Preliminary Examination Of Bids ………………………………….. 8 18. Domestic Preference ……………………………………………………………… 8 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 8 20. Post-qualification ………………………………………………………………… 8 21. Signing Of The Contract …………………………………………………………… 8 Section Iii. Bid Data Sheet …………………………………………………..9 Section Iv. General Conditions Of Contract ……………………...………..10 1. Scope Of Contract ………………………………………………………………… 10 2. Advance Payment And Terms Of Payment ……………………………………….. 10 3. Performance Security ……………………………………………………………. 10 4. Inspection And Tests ……………………………………………………………… 10 5. Warranty …………………………………………………………………………. 10 6. Liability Of The Supplier ………………………………………………………….. 10 Section V. Special Conditions Of Contract ………………………………….11 Section Vi. Schedule Of Requirements ……………………………………....13 Section Vii. Technical Specifications …………………………………………14 Section Viii. Checklist Of Technical And Financial Documents …………..14 Section I. Invitation To Bid Purchase Of Scanner Bid No. Jch-24-698-b(rebid) 1. The Iloilo Provincial Government Through The Sb#4 2020 (co) Intends To Apply The Sum Of One Hundred Seventy-four Thousand Nine Hundred Sixty-nine Pesos (php174,969.00) Being The Abc To Payments Under The Contract For The Purchase Of Scanner. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On June 27 ,2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On N/a At 9:00 A.m. At Bac Secretariat, Iloilo Provincial Capitol And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City On Or Before July 4,2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On July 4,2024 At 9:01 A.m. At The 5th Floor, Bac Secretariat, Iloilo Provincial Capitol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. G. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com/bac@iloilo.gov.ph Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com June 25 ,2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Scanner With Bid No. Jch-24-698-b(rebid). The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2020 In The Amount Of One Hundred Seventy-four Thousand Nine Hundred Sixty-nine Pesos (php174,969.00) 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp [jesus M. Colmenares District Hospital-balasan,iloilo] Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Jesus M. Colmenares District Hospital-balasan,iloilo. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Item Number Description Quantity Total Delivered, Weeks/months 1 Scanner 3 3 Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Jch-24-698-b(rebid) Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Scanner Scanner Type: Adf, Manual Feed, Duplex Scanning Speed (a4 Portrait): Simplex/duplex: 40ppm, Minimum Image Sensor: Cis X 2 (front X 1, Back X 1), Or Better Light Source: 3 Color Led (red/green/blue) Optical Resolution: 600dpi, Or Better Adf Capacity: 50 Sheets (a4, 80 G/m2 Or 20 Lb) Interface: Usb, Wifi, Minimum Lcd: 4.3 In. Color Tft Touch Screen, Or Wider Terms And Conditions Delivery Period 30 Days Upon Receipt Of Approved Notice To Proceed Warranty: One Year Parts And Services W/ Free Preventive Maintenance During Warranty Period ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope (m) Original Of Duly Signed And Accomplished Financial Bid Form; And (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.