Scanning Tenders

Details: Description Procurement Of Various Equipment For Physical And Rehabilitation Ib No. 2024-07-16 (35) 1. The Adela Serra Ty Memorial Medical Center, Through The Astmmc Fund Intends To Apply The Sum Of Fourteen Million Nine Hundred Fifty Thousand Pesos Only [php 14,950,000.00] Being The Abc To Payments Under The Contract For An Item. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Adela Serra Ty Memorial Medical Center Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 60 Calendar Days. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Adela Serra Ty Memorial Medical Center And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm, Monday Thru Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On June 25, 2024 To July 16, 2024 From The Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Of Twenty Five Thousand Pesos Only [php 25,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In The Manner Whether It Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 6. The Adela Serra Ty Memorial Medical Center Will Hold A Pre-bid Conference On July 04, 2024; 09:00 Am At Bac Conference Room, Opd Bldg, Astmmc, Tandag City And Or Through Video Conferencing Or Webcasting Via Meet.google.com/rbu-snjw-vga Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before 09:00 Am; July 16, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 09:01 Am; July 16, 2024 At Bac Conference Room, Opd Bldg, Astmmc, Tandag City And Or Through Video Conferencing Or Webcasting Via Meet.google.com/rbu-snjw-vga Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Adela Serra Ty Memorial Medical Center Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dominador B. Toral, Md Bac Office, 2nd Floor Opd Bldg. Astmmc, Tandag City, Sds, 8300 Tel No. 086-211-4306 Astmmcprocurement@gmail.com 12. For Downloading Of Bidding Documents, You May Visit: Philgeps.gov.ph Dominador B. Toral, Rn, Md, Dpbohns Hbac Chairman Lot No. Description Unit Qty Total Delivered, Weeks/months 1 Color Doppler Muskuloskeletal Ultrasound Machine Unit 1 5,000,000.00 60 Calendar Days Technical Specifications * Color Monitor, Tft Or Lcd From At Least "21.5-inch High Resolution Led Monitor * Max Of 360° Articulating Monitor Arm * At Least 10.1-13.3 Inch, Ultra-slim, Angle Adjustable, Touch Gestures Supporter * Dynamic Range At Least 180 Db. * Frequency Range : 1-18 Mhz Imaging Modes *2d-mode *power Doppler (pd) Mode *m-mode * Scan Mode *color M-mode *3d/4d/xi Stic Imaging Mode *anatomical Mode *freehand 3d Mode *color Doppler Mode *dual Mode *pulsed Wave (pw) Spectral Doppler Mode *quad Mode *continuous Wave (cw) Doppler Mode *combined Mode *tissue Doppler Imaging (tdi) Mode *simultaneous Mode *tissue Doppler Wave (tdw) Mode *zoom Mode *s-flow Mode * Digital And Caliper Measurement Functions Required For Both Distance, Area And Volume. * Trackball And/or Touchpad In User Panel. * Frame By Frame Image Memory Or Cine-loop. 2000 Fps (hz) * Doppler Display To Indicate Blood Flow Both Numerically And In Colour. * Connection Port For Image Printing To Be Included (printer Specified Separately). * Hd/cd/dvd/usb Storage Unit * Internal Hard Disk Of At Least 500gb -1 Tb * Innovative Dual-wing Floating Arm * Raw Data * Patient Information Management * At Least 4 Probes Ports * Storage Space * Gel Warmer * Cable Management * Side Tray Connectivity - Built-in Wireless Adapter & Lan : 802.11n, Dual Band 2.4ghz & 5ghz - Built-in Battery Up To~60 Min Scanning Application Physical Specification Musculoskeletal Audio Speakers Nerve Stereo Audio Speakers Small Parts Monitor With Unique Dual-wing Floating Arm Vascular Rotate Angle:360 Degrees To The Left And 360 Degrees To The Right Pediatrics Along With The Support Arm Emergency Medicine Up: 150mm Others Front/back: 300mm Wheels Front Castor (2 Ea): Total Lock And Break Rear Castor (2 Ea): Right One For Electrical Power Total Lock And Break; Left One For Swivel Lock Voltage: 220-240v~ Frequency: 50/60 Hz Transducer Port And Holder Power Consumption: Max. 800va Transducer Ports With Dust Circuit Breaker: 100v~, 10a Prevention: 4 Active Ports, 1 More For Pencil Probe Only Operating Environment Transducer Holder: 5 (one For Ambient Temperature: 0-40 °c Pencil Transducer), Plus 1 Relative Humidity: 30%-85% (no Condensation) Dedicated Endocavity Transducer Holder Atmospheric Pressure: Adjustable Panel Height 700hpa-1060hpa Touch Screen Display User Interface * At Least 21.5 -inch High Sensitivity Floating Control Panel Anti-glare Color Touch Screen Resolution: Up To 1280*800 Brightness Adjustable For The Digital Brightness And Contrast Adjustment Through Preset Backlight Of The Whole Control Panel Angel Adjustable Range: 360degrees Full-sized, Backlit Qwerty Keyboard Viewing Angle: ≥178 Degrees 8 Programmable Keys Support Touch Screen Gestures 8-segment Tgc Control Support Either Hand Writing Or With Gloves On Rotate Angle Range: At Least 180 Degrees 10.1” Touch Panel High Resolution Led Monitor Touch Gestures Down/up: 200±20 Mm Or Better Swipe Down/up: Display/remove 3.2 Monitor Up Projected Image On Touch Screen * At Least 21.5-inch High Resolution Color Up Swipe Horizontally: Page Up/down Led Monitor Or Review Images/cine Loops One By One Resolution: 1920x1080 At Least True Color Swipe From Left Edge To Right: Viewing Angle: ≥178 Degrees Display Hidden Menu On Projected Image. Digital Brightness And Contrast Image Parameter Adjustment. Adjustment Through Preset Measurement On Projected Image On Touch Screen Tile/rotate Independent Zoom In/ Out The Projected Image On Touch Screen Adjustment: Rotate Or Erase On Projected 3d/4d Image On Touch Screen Tilt Angle Range:110 Degrees 8 User Defined Gestures Using Two Rotate Angle Range: 180 Degrees Fingers For More Functions, Such Recorder As Freeze, Save, Print, Activate Printer Specific Imaging Modes, Included Probes: Measurements, And Some Other A) Convex With At Least Triple Frequency, Bandwidth Of At Least 2mhz- 8mhz Frequency; Special Functions. B) Linear With At Least Triple Frequency, Bandwidth Of At Least 3 Mhz-16 Frequency; Touch Screen Menu Layout Editable C) Phased Array With At Least Triple Frequency, Bandwidth Of At Least 2 Mhz Including 3 Mhz Frequency; (optional) System Boot-up Boot-up From Shut-down: < 90sec Trolley To Include Shelf Space For Image Printer And Documentation Application: - Shared Service (includes Musculoskeletal, Nerve Obstetrics, Vascular, Small Parts, Pediatrics, Emergency Medicine, Gynecology, Abdomen, Urology, And Cardiology Packages). - Dicom Basic - Dicom/hl7 Worklist - 3d/4d Includes: - Viewing Workstation - 1 Unit 55" Smart Tv For Viewing Of Patient Computer Specifications * 1 Unit Branded Computer System At Least 16cores Up Processor 3.5ghz Up With 32gb Of Ram And Dedicated Video Card At Least 8gb Gddr5 24 Inches Monitor With Wireless Adapter, Ups, Mouse, Keyboard, Speaker And Other Accessories Needed * Provide Wireless & Wired Access Point For Pacsplus & Dicom (router & Switch Hub) * 2 Units Branded Laptop At Least 17" And Up With Viewing System For Ultrasound Synchronizing To Ultrasound '-16 Core, 1 Tb With Bag & Wireless Mouse * 2 Units Rotating Chair Adjustable Up & Down * 1 Unit Modern Table Hard Structure Steel And Chrome Plated Or Stainless * 2kva Ups With Avr Computer Grade For Workstation - 3kva Ups Medical Grade With Trolly For Ultrasound Consumables - 2000 Pcs Ultrasound Printer Thermal Paper - 1000 Btls Ultrasound Gel Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Training End Users & Biomedical/engineer Training Of Users And Biomedical *** Training Of Users In Operation And Basic Maintenance And Calibration Shall Be Provided *** Supplier To Issue Certificate Of Training *** Comprehensive Training Of Users In Operation , Basic And Advance Maintenance Shall Be Provided *** Off-site Comprehensive Training 4-6 Biomed Technician Participants Can Attend For One Week Technical Training & Orientation Of Biomedical Technician/engineer In Including Fares, Accommodation And Meals Off-site Comprehensive Training 1 End-user Participants Can Attend For One Week Technical Training & Orientation Of Biomedical Technician/engineer In Including Fares, Accommodation And Meals User Care*** Unit Layout To Enable Easy Cleaning And Sterilization Of All Surfaces. Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 5 Years Maintenance And Service = At Least 2 Years Maintenance Tasks *semi-annual Preventive Maintenance/calibration To Be Conducted By The Company Engineer In-charge *advanced Maintenance Tasks Required Shall Be Documented *physical And Rehabilitation Medicine As The Need Arise Type Of Service Contract Service Contract Is Recommended In Case No In-house Service Experience Is Available To Ensure That Preventive Maintenance Will Be Performed At Regular Intervals. Pricing For Service Contracts Should Be Negotiated Before The System Is Purchased. Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Documentation: Documentation Requirements - User, Technical And Maintenance Manuals To Be Supplied In English Language - At Least 3 Copies - Certificate Of Calibration And Inspection To Be Provided - List Of Equipment And Procedures Required For Local Calibration And Routine Maintenance To Be Provided By The Supplier - List Of Important Spare Parts And Accessories, With Their Part Numbers And Cost To Be Provided By The Supplier - Trade-in With Manufacturer If Available Decommissioning Estimated Life Span: 10 Years Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards 2 Tecar Therapy With Two Independent Channels Unit 1 4,000,000.00 60 Calendar Days Purpose Of Use: Tecar Therapy Is A Form Of Endogenous Thermotherapy (it Heals Your Body By Creating Heat Inside It) Based On Radio Waves. It Is Also Known As “capacitive And Resistive Electrical Transfer”. Other Types Of Laser Therapy Include Tens And Pemf, Which Use Different Wavelengths. Technical Specification Connected Device By Wifi (software Updated And Remote Technical Assistance) Operating Frequency: Tecar (300-500-1000khz), High Ems (1.5-4khz) , High Tens (2-5-25hz) Weight: At Least 6 Kg - Trolley : 17 Kg Manufactured To Iso13485 - Standards. Certifications: Medical Device - Fda-cleared Features: Capacitive Mode Medium-direct Current Boost Soft-500khz Deep Cet-300khz Dynamic-alternate Function Soft And Deep Resistive Mode Boost-medum-low Neutral Fix-neutral Mobile Two (2) Resistive Probes Can Use At The Same Time With Neutral Return Plate Resistive And Capacitive Can Use At The Same Time Resistive With Tens Mode (2, 5 And 25 Hz) Static-dynamic Neutral Fix- Neutral Mobile Resistive With Ems Mode : Focal-dynamic-radial Neutral Fix-neutral Mobile Mix Mode : Boost-medium-low Accessories: Resistive And Capacitive Tecar Handpiece Resistive And Capacitive Extension Cable 1 Neutral Extension Cable 1 Mobile Neutral Cable 1 Metal Neutral Plate 1 Mobile Neutral Handheld Neutral Adhesive Cable 2 Ret Tecar Bracelets 3 Capacitive Electrodes ( Small, Medium, Large) 1 Capacitive Convex Electrode 3 Resistive Electrodes ( Small, Medium, Large) 1 Resistive Convex Electrode 2 Multipolar Electrodes (small And Large) Resistive Focus Electrode 1 Resistive Fixed Pad Conducting Cream (oil Based) 1 Power Cord Power Supply: Ac 220vac ± 10% 50/60hz Dedicated Trolley With Wheels Other Components Per Unit 1 Unit Avr 3kva & 1 Unit Ups 3kva 1unit Dehumifier 15 Liters 1 Unit 5 Meters Extension Wire Standard Provide Adaptor If Needed Per Unit Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 3 Years Maintenance And Service = At Least 3 Years Maintenance Tasks *semi-annual Preventive Maintenance/calibration To Be Conducted By The Company Engineer In-charge *advanced Maintenance Tasks Required Shall Be Documented *end User As The Need Arise Type Of Service Contract Service Contract Is Recommended In Case No In-house Service Experience Is Available To Ensure That Preventive Maintenance Will Be Performed At Regular Intervals. Pricing For Service Contracts Should Be Negotiated Before The System Is Purchased. Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Sterilization Process For Accessories : Chemical Sterilization- Non Corrosive Chemical / Disinfectant Consumables / Reagents Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Laboratory Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards 3 Partial Weight Bearing (body Weight Support) Unit 1 980,000.00 60 Calendar Days Purpose Of Use: Pwb Is A Broad Term And Can Range From Anything Greater Than Non-weight Bearing To Anything Less Than Full Weight Bearing. This Status Should Be Accompanied By A Percentage Figure To Further Describe The Extent Of Weight Bearing. Most Sources Define Partial Weight Bearing As Being 30% To 50% Of A Patient's Body Weight. Features And Benefits Assist Posture, Balance & Weight Bearing Prevent Excessive Rotation Facilitate Hip Flexor Tension Differential Control Of Right Vs. Left Side Walk On Treadmill Or Over Ground Mobile Design Goes From Room To Room Train Gait Under Fall-free Conditions Frees Therapist To Facilitate Walking Wide Range Of Patient Sizes & Impairments Lift Patients Of All Sizes From Sit To Stand Fall-free, Supported Walking Technical Specifications - Hand Remote Control: Up/down Function - Minimum User Weight: At Least 308lbs(140kg) - Maximum User Weight: At Least 500lbs(227kg) - Maximum Unit Height: At Least 7’10” - Maximum Patient Height On Ground: At Least 7’4” - Lift Stroke: At Least 20” - Inside Base Width: At Least 34” (86.4cm) - Width: At Least 94cm - With Caster Wheels - Input Power: 220vac, 60hz - Battery Capacity: Rechargeable Battery 24vdc Power Supply: Ac 220vac ± 10% 50/60hz Accessories: Harness ( Complete Set) Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 3 Years Maintenance And Service = At Least 3 Years Maintenance Tasks *semi-annual Preventive Maintenance/calibration To Be Conducted By The Company Engineer In-charge *advanced Maintenance Tasks Required Shall Be Documented *end User As The Need Arise Type Of Service Contract Service Contract Is Recommended In Case No In-house Service Experience Is Available To Ensure That Preventive Maintenance Will Be Performed At Regular Intervals. Pricing For Service Contracts Should Be Negotiated Before The System Is Purchased. Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Sterilization Process For Accessories : Chemical Sterilization- Non Corrosive Chemical / Disinfectant Consumables / Reagents Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Laboratory Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards 4 Electrotherapy And Semg Biofeedback System Unit 1 550,000.00 60 Calendar Days Purpose Of Use: Patients With The Treatment They Deserve And Therapists With The Support They Need. Research Shows That The Use Of Neuromuscular Electrical Stimulation (nmes) Relieves Patients Of The Emotional, Physical, And Financial Burdens Of Feeding Tubes—allowing A Return To Normalcy. It Also Creates An Opportunity For Therapists To Not Only Manage Their Patients’ Difficulties, But Also To Overcome Them. Physical Characteristic W= Suppliers Preference D = Suppliers Preference H = Suppliers Preference Weight : At Least 0.34 Kg Input 6v (4x1.5v Aa) Maximum Voltage (patient) 70v (+0/-5v) Mode Continuous Product Characteristics Temperature 5º To 40º C Relative Humidity 15% To 95% Atmospheric Pressure 700hpa To 1060hpa Transport And Storage Conditions Temperature -25ºc To 70ºc Relative Humidity Max 90% Atmospheric Pressure 700hpa To 1060hpa At Least 4-channel Nmes Symmetrical Biphasic Intensity 0-25 Ma (constant Current) Channel Mode Continuous, Reciprocal, Co-contract Phase Duration 60-300 Μsec (10 % Accuracy) Frequency 1-80 Pps (5 % Accuracy) Treatment Time 1-240 Min Interphase Interval 100 Μsec Intensity 0-25 Ma (constant Current) Channel Mode Co-contract Phase Duration 300 Μsec (10 % Accuracy) Frequency 80 Pps (5 % Accuracy) Treatment Time 60 Min Interphase Interval 100 Μsec 2-channel Emg Semg Semg Range 0.2 To 2000 Μv Rms (continuous) Sensitivity 0.1 Μv Rms Accuracy 6% Of Μv Reading +/- 0.3 Μv Standard Accessories: - 1 Travel Case - 1 Kit Of 4 Snap Wires For Electrodes - 1 Emg Reference Wire - 1 Pack Of 4 Adult Electrodes - 1 Stand - 1 Stylus For Touch Screen - 1 Rubber Protection Sleeve - 4 Aa 1.5v Batteries - 1 Micro Sd Card - 1 User Manual And Pc Share Application On Usb Key - 1 Printed Quick Start Guide - Extra 2 Pieces Electrode Pads Includes : All-in-one Pc - Intel Core Processor - 1tb Internal Storage - 8gb Ram Memory - Win Other Components Per Unit 1 Unit Ups With Avr At Least 3000va Up 1 Unit 5 Meters Extension Wire Standard Provide Adaptor If Needed Per Unit Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 3 Years Maintenance And Service = At Least 3 Years Maintenance Tasks *semi-annual Preventive Maintenance/calibration To Be Conducted By The Company Engineer In-charge *advanced Maintenance Tasks Required Shall Be Documented *end User As The Need Arise Type Of Service Contract Service Contract Is Recommended In Case No In-house Service Experience Is Available To Ensure That Preventive Maintenance Will Be Performed At Regular Intervals. Pricing For Service Contracts Should Be Negotiated Before The System Is Purchased. Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Sterilization Process For Accessories: Chemical Sterilization- Non-corrosive Chemical / Disinfectant Consumables/reagents Requirements For Commissioning *** Supplier To Perform Installation, Safety, And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer/supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards 5 Electromagnetic Field Technology Machine Unit 1 4,100,000.00 60 Calendar Days Purpose Of Use: Features And Benefits I. Technology: High Intensity Electromagnetic Field Ii. Highest Maximum Stimulation Intensity Of Up To 2.5 Tesla Iii. Frequency Range Of 1-150hz Iv. Standard Accessories A. Focus Field Applicator With 6 Joint Arm Movement B. Applicator Arm With Cable Holder C. Arm Installation Set D. User’s Manual E. Power Cord F. Main Fuses V. Magnetic Field Classification: Class Iia According To Mdd 93/42/eec Vi. Main Unit Display A. Graphic Color Touch Screen At Least 8.4“ B. Preset Protocols With User Defined Protocols C. Body Parts Screen Navigation D. Quick Preset Protocols E. Manual Setting Of Therapy Parameters 1. Basic Mode 2. Sequence Mode 3. Single Mode Vii. Therapy Parameters A. Pulse Type: Sine, Biphasic B. Intensity Range: .7 To 2.5 T C. Intensity Setting: Relative 0-100% D. Intensity Modulation Type: None, Trapezoid, Sine, Staircase E. Pulse Repetition Rate Modulation Types: None, Alternating, Trapezoid, Sine, Random Viii. Device Design A. Unit Weight Is At Least 46kg Including Package And Standard Accessories App (included) B. Unit Dimensions (wxhxd) At Least 20x28x23 Inches C. Pulse Quality Monitor 400 Watts D. Intensity Predictor: Ability To Deliver 100% Intensity With Increasing Frequency E. Patented Cool Flow Technology Technical Specification Frequency Up To 150 Hz Display At Least 8.4’’ Color Touchscreen Quick Protocols Yes Body Part Navigation Yes Preset Protocols Yes Therapeutic Encyclopedia Yes Patient Database Yes Intensity Up To 2.5 T Dimension 500 X 970 X 580 Mm Suppliers Preference Weight At Least 33 Kg Main Supply 100-240 V Ac, 50-60 Hz Arm Six-joint Arm Applicator Focused Field Applicator Pulse Quality Monitor Yes Power Supply: Ac 220vac ± 10% 50/60hz Dedicated Trolley With Wheels Other Components Per Unit Other Components Per Unit 1 Unit Avr 3kva & 1 Unit Ups 3kva 1 Unit 5 Meters Extension Wire Standard Provide Adaptor If Needed Per Unit Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 3 Years Maintenance And Service = At Least 3 Years Maintenance Tasks *semi-annual Preventive Maintenance/calibration To Be Conducted By The Company Engineer In-charge *advanced Maintenance Tasks Required Shall Be Documented *end User As The Need Arises Type Of Service Contract Service Contract Is Recommended In Case No In-house Service Experience Is Available To Ensure That Preventive Maintenance Will Be Performed At Regular Intervals. Pricing For Service Contracts Should Be Negotiated Before The System Is Purchased. Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Sterilization Process For Accessories : Chemical Sterilization- Non Corrosive Chemical / Disinfectant Consumables / Reagents Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards 6 Smart Balance Board Unit 1 320,000.00 60 Calendar Days Purpose Of Use: Features And Benefits Premium Wooden Smart Balance Board At Least (19.6" X 13.7") Ios/android App With Predefined Training Programs & At Least 14 Balance Games Multiple Patients Dashboard Wearable Bluetooth Motion Sensor With 3 Velcro Straps Rom Assessment And Training Cycling Speedometer Trainer Holds Up To 450 Lbs *mobile Device & Balance Cushion Are Not Included Technical Specification Wireless Connectivity To Your Smartphone Or Tablet Battery Life Is 400 Hours Of Continuous Use Led & Audio Indicators 3-axis Accelerometer Sensors Operating Temperature: -5 ˚c To 45 ˚c (23 ˚f To 113 ˚f) Battery Type: 2032 Lithium Coin Battery 3v Communication Modules: Bluetooth Low Energy (ble) Power Supply: Ac 220vac ± 10% 50/60hz Inclusions: Tripod Tablet Sensor With Board Strap Inflatable Base 43' Smart Television Other Components Per Unit 1 Unit Avr 3kva & 1 Unit Ups 3kva 1 Unit 5 Meters Extension Wire Standard Provide Adaptor If Needed Per Unit Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 3 Years Maintenance And Service = At Least 3 Years Maintenance Tasks *semi-annual Preventive Maintenance/calibration To Be Conducted By The Company Engineer In-charge *advanced Maintenance Tasks Required Shall Be Documented *end User As The Need Arises Type Of Service Contract Service Contract Is Recommended In Case No In-house Service Experience Is Available To Ensure That Preventive Maintenance Will Be Performed At Regular Intervals. Pricing For Service Contracts Should Be Negotiated Before The System Is Purchased. Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Sterilization Process For Accessories : Chemical Sterilization- Non Corrosive Chemical / Disinfectant Consumables/reagents Requirements For Commissioning *** Supplier To Perform Installation, Safety, And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards

Live Ingest / Playback Servers For Cbc/radio-canada

Details: Description Department Of Social Welfare And Development Field Office Xii Purok Bumanaag, Brgy. Zone Iii, Koroandal City, 9506 Philippine Bidding Documents For The Procurement Of Supply And Delivery Of Office Equipment To Be Used By Aics Staff Project Identification No. Dswd12-cis-2024-06-012 Government Of The Republic Of The Philippines Sixth Edition July 2020 Preface These Philippine Bidding Documents (pbds) For The Procurement Of Goods Through Competitive Bidding Have Been Prepared By The Government Of The Philippines For Use By Any Branch, Constitutional Commission Or Office, Agency, Department, Bureau, Office, Or Instrumentality Of The Government Of The Philippines, National Government Agencies, Including Government-owned And/or Controlled Corporations, Government Financing Institutions, State Universities And Colleges, And Local Government Unit. The Procedures And Practices Presented In This Document Have Been Developed Through Broad Experience, And Are For Mandatory Use In Projects That Are Financed In Whole Or In Part By The Government Of The Philippines Or Any Foreign Government/foreign Or International Financing Institution In Accordance With The Provisions Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. The Bidding Documents Shall Clearly And Adequately Define, Among Others: (i) The Objectives, Scope, And Expected Outputs And/or Results Of The Proposed Contract Or Framework Agreement, As The Case May Be; (ii) The Eligibility Requirements Of Bidders; (iii) The Expected Contract Or Framework Agreement Duration, The Estimated Quantity In The Case Of Procurement Of Goods, Delivery Schedule And/or Time Frame; And (iv) The Obligations, Duties, And/or Functions Of The Winning Bidder. Care Should Be Taken To Check The Relevance Of The Provisions Of The Pbds Against The Requirements Of The Specific Goods To Be Procured. If Duplication Of A Subject Is Inevitable In Other Sections Of The Document Prepared By The Procuring Entity, Care Must Be Exercised To Avoid Contradictions Between Clauses Dealing With The Same Matter. Moreover, Each Section Is Prepared With Notes Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Shall Not Be Included In The Final Documents. The Following General Directions Should Be Observed When Using The Documents: A. All The Documents Listed In The Table Of Contents Are Normally Required For The Procurement Of Goods. However, They Should Be Adapted As Necessary To The Circumstances Of The Particular Procurement Project. B. Specific Details, Such As The “name Of The Procuring Entity” And “address For Bid Submission,” Should Be Furnished In The Instructions To Bidders, Bid Data Sheet, And Special Conditions Of Contract. The Final Documents Should Contain Neither Blank Spaces Nor Options. C. This Preface And The Footnotes Or Notes In Italics Included In The Invitation To Bid, Bid Data Sheet, General Conditions Of Contract, Special Conditions Of Contract, Schedule Of Requirements, And Specifications Are Not Part Of The Text Of The Final Document, Although They Contain Instructions That The Procuring Entity Should Strictly Follow. D. The Cover Should Be Modified As Required To Identify The Bidding Documents As To The Procurement Project, Project Identification Number, And Procuring Entity, In Addition To The Date Of Issue. E. Modifications For Specific Procurement Project Details Should Be Provided In The Special Conditions Of Contract As Amendments To The Conditions Of Contract. For Easy Completion, Whenever Reference Has To Be Made To Specific Clauses In The Bid Data Sheet Or Special Conditions Of Contract, These Terms Shall Be Printed In Bold Typeface On Sections I (instructions To Bidders) And Iii (general Conditions Of Contract), Respectively. F. For Guidelines On The Use Of Bidding Forms And The Procurement Of Foreign-assisted Projects, These Will Be Covered By A Separate Issuance Of The Government Procurement Policy Board. Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….4 Section I. Invitation To Bid……………………………………………………..7 Section Ii. Instructions To Bidders…………………………………………...11 1. Scope Of Bid ………………………………………………………………………. 12 2. Funding Information………………………………………………………………. 12 3. Bidding Requirements ……………………………………………………………. 12 4. Corrupt, Fraudulent, Collusive, And Coercive Practices………………………….. 12 5. Eligible Bidders…………………………………………………………………… 12 6. Origin Of Goods ………………………………………………………………….. 13 7. Subcontracts ……………………………………………………………………… 13 8. Pre-bid Conference ………………………………………………………………. 13 9. Clarification And Amendment Of Bidding Documents …………………………… 14 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 14 11. Documents Comprising The Bid: Financial Component …………………………... 14 12. Bid Prices …………………………………………………………………………. 14 13. Bid And Payment Currencies ……………………………………………………… 15 14. Bid Security ………………………………………………………………………. 15 15. Sealing And Marking Of Bids ……………………………………………………… 16 16. Deadline For Submission Of Bids …………………………………………………. 16 17. Opening And Preliminary Examination Of Bids ………………………………….. 16 18. Domestic Preference ……………………………………………………………… 16 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 16 20. Post-qualification ………………………………………………………………… 17 21. Signing Of The Contract …………………………………………………………… 17 Section Iii. Bid Data Sheet …………………………………………………..18 Section Iv. General Conditions Of Contract ……………………...………..23 1. Scope Of Contract ………………………………………………………………… 24 2. Advance Payment And Terms Of Payment ……………………………………….. 24 3. Performance Security ……………………………………………………………. 24 4. Inspection And Tests ……………………………………………………………… 24 5. Warranty …………………………………………………………………………. 25 6. Liability Of The Supplier ………………………………………………………….. 25 Section V. Special Conditions Of Contract ………………………………….26 Section Vi. Schedule Of Requirements ……………………………………....30 Section Vii. Technical Specifications …………………………………………39 Section Viii. Checklist Of Technical And Financial Documents …………..58 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Notes On The Invitation To Bid The Invitation To Bid (ib) Provides Information That Enables Potential Bidders To Decide Whether To Participate In The Procurement At Hand. The Ib Shall Be Posted In Accordance With Section 21.2 Of The 2016 Revised Irr Of Ra No. 9184. Apart From The Essential Items Listed In The Bidding Documents, The Ib Should Also Indicate The Following: A. The Date Of Availability Of The Bidding Documents, Which Shall Be From The Time The Ib Is First Advertised/posted Until The Deadline For The Submission And Receipt Of Bids; B. The Place Where The Bidding Documents May Be Acquired Or The Website Where It May Be Downloaded; C. The Deadline For The Submission And Receipt Of Bids; And D. Any Important Bid Evaluation Criteria (e.g., The Application Of A Margin Of Preference In Bid Evaluation). The Ib Should Be Incorporated In The Bidding Documents. The Information Contained In The Ib Must Conform To The Bidding Documents And In Particular To The Relevant Information In The Bid Data Sheet. Invitation To Bid For The Dswd12-cis-2024-06-011 Procurement Of Supply And Delivery Of Office Equipment To Be Used By Aics Staff 1. The Department Of Social Welfare And Development Field Office Xii, Through The General Appropriations Act Fy 2024 Intends To Apply The Sum Of Two Million Four Hundred Sixty-three Thousand And Eight Hundred Pesos Only (php 2,463,800.00) Being The Abc To Payments Under The Contract For Dswd12-cis-2024-06-012 Procurement Of Supply And Delivery Of Office Furniture To Be Used By Aics Staff. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Social Welfare And Development Field Office Xii Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By One Time Delivery And Within Thirty (30) Days Upon The Receipt Of The Purchase Order. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Social Welfare And Development Field Office Xii – Bids And Awards Committee Secretariat Office And Inspect The Bidding Documents At The Address Given Below During Office Hours (8:00a.m. To 5:00 P.m.). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On June 06, 2024 To June 27, 2024, 05:00 P.m From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Approved Budget For The Contract Bid Docs Amount ₱ 2,463,800.00 Php 5,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Department Of Social Welfare And Development Field Office Xii Will Hold A Pre-bid Conference On June 13, 2024, 11:00 A.m. At Dswd Field Office 12, Regional Center, Brgy. Carpenter Hill, Koronadal City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below On Or Before June 28, 2024, 09:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening And Evaluation Shall Be On June 28, 2024, 11:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Prospective Bidders Are Hereby Reminded, As Follows: A. Bidding Documents For Eligibility And Financial Envelopes Shall Comprise The Following: I. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). *one (1) Mother Envelope For Technical Component Documents, Composed Of Three (3) Sub Envelopes For (original, Copy 1, And Copy 2). Ii. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). *one (1) Mother Envelope For Financial Component Documents, Composed Of Three (3) Sub Envelopes For (original, Copy 1, And Copy 2). 11. The Department Of Social Welfare And Development Field Office Xii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dswd 12 – Bac Secretariat Head Administrative Division – Procurement Section Dswd Field Office 12, Regional Center, Brgy. Carpenter Hills, Koronadal City, 9506 Procurement.fo12@dswd.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://fo12.dswd.gov.ph/bid-bulletin/ Https://www.philgeps.gov.ph June 05, 2024 Jackiya A. Lao Bac Chairperson By The Authority Of The Bac Chairperson (sgd.) Emerita Q. Dizon. Rsw, Mps Bac Vice Chairperson Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Department Of Social Welfare And Development Field Office Xii Wishes To Receive Bids For The Procurement Of Supply And Delivery Of Office Equipment To Be Used By Aics Staff With Identification Number Dswd12-cis-2024-06-012. The Procurement Project (referred To Herein As “project”) Is Composed Of One Lot Or Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 Approved In The Amount Of Two Million Four Hundred Sixty-three Thousand And Eight Hundred Pesos Only (₱2,463,800.00) 2.2. The Source Of Funding The General Appropriations Act. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On June 13, 2024, 10:00 A.m. And At Its Physical Address Department Of Social Welfare And Development Field Office 12, Regional Center, Brgy. Carpenter Hill, Koronadal City As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, On/or Before June 15, 2024 Or At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In The Bds. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In The Bds. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until October 28, 2024. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Notes On The Bid Data Sheet The Bid Data Sheet (bds) Consists Of Provisions That Supplement, Amend, Or Specify In Detail, Information, Or Requirements Included In The Itb Found In Section Ii, Which Are Specific To Each Procurement. This Section Is Intended To Assist The Procuring Entity In Providing The Specific Information In Relation To Corresponding Clauses In The Itb And Has To Be Prepared For Each Specific Procurement. The Procuring Entity Should Specify In The Bds Information And Requirements Specific To The Circumstances Of The Procuring Entity, The Processing Of The Procurement, And The Bid Evaluation Criteria That Will Apply To The Bids. In Preparing The Bds, The Following Aspects Should Be Checked: A. Information That Specifies And Complements Provisions Of The Itb Must Be Incorporated. B. Amendments And/or Supplements, If Any, To Provisions Of The Itb As Necessitated By The Circumstances Of The Specific Procurement, Must Also Be Incorporated. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply And Delivery Of Consumables And Expendable Office Equipment. B. Completed Within At Least Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 The Price Of The Goods Shall Be Quoted Ddp Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than ₱49,276.00 Or The Amount Equivalent To Two Percent (2%) Of Abc If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than ₱123,190.00 Or The Amount Equivalent To Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 19.1 1. All Forms Must Be Submitted Using The Prescribed Format Provided By The Procuring Entity And Completed Without Any Alterations To Their Format, And No Substitute Form Shall Be Accepted. All Blank Spaces Shall Be Filled In With The Information Requested. 2. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder, Otherwise, Bids Shall Be Subject To An Outright Disqualification. 20.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Supplier Of The Notice Of Post Qualification From The Bac That The Supplier Has The Lowest Calculated Bid (lcb) Or Single Calculated Bid (scb), The Supplier Shall Submit And/or Present The Following Requirements For Post Qualification In Accordance To Section 34 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra9184: 1. Present Original Copy Of The Following: A. A. Latest Income Tax Return And Business Tax Return ( For 4th Quarter Of 2023) B. B. Latest Value Added Tax (vat) Return ( For 4th Quarter Of 2023, If Applicable) Only Tax Returns Filed And Taxes Paid Through The Bir Electronic Filing & Payment System (efps) Shall Be Accepted. C. Valid Philgeps Registration Certificate (platinum Membership) (all Pages) D. Valid Registration Certificate From Securities And Exchange Commission (sec) For Corporations, Or From Department Of Trade And Industry (dti) For Sole Proprietorship, Or From Cooperative Development Authority (cda) For Cooperatives; E. Valid Business/mayor’s Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Bidder Is Located; F. Valid Tax Clearance Per Eo 398, Series Of 2005, As Finally Reviewed And Approved By The Bir; G. Bureau Of Internal Revenue (bir) Registration Certificate. H. Copy Of Contracts Or Po’s, Notice Of Award (noa) And Notice To Proceed (ntp) For All On-going Contracts I. End-user’s Acceptance, Official Receipt (duplicate Or Triplicate Copy) Or Sales Invoice With Collection Receipt/s (duplicate Or Triplicate Copy) Relative To Single Largest Completed Contract J. Company Profile And Organizational Chart. Company Printed Brochure May Be Included. K. Vicinity Map/location Of The Business. L. Other Appropriate Licenses And Permits Required By Law And Stated In The Bidding Documents. Failure To Submit Any Of The Post-qualification Requirements On Time, Or A Finding Against The Veracity Thereof, Shall Disqualify The Bidder For Award. Provided In The Event That A Finding Against The Veracity Of Any Of The Documents Submitted Is Made, It Shall Cause The Forfeiture Of The Bid Security In Accordance With Section 69 Of The Irr Of Ra 9184. Note: For Post Qualification Purposes Only 20.3 Each Bidder Shall Submit The Following In One (1) “mother” Envelope Duly Sealed And Labeled, Containing Two (2) Sets Of Envelopes: First Envelope Containing Three (3) Sets Of Eligibility And Technical Documents Duly Sealed And Marked As Original Copy, Copy One And Copy Two. Second Envelope Containing Three (3) Sets Of Financial Bid Documents Duly Sealed And Marked As Original Copy, Copy One And Copy Two. 20.4 All Envelopes Shall Be Labeled/marked As Follows: To : Jackiya A. Lao Chairperson Bids And Awards Committee Dswd-field Office 12 From :_______________________________ (name Of Bidder In Capital Letters) Address: _______________________________ (address Of Bidder In Capital Letters) Project: Procurement Of Supply And Delivery Of Office Equipment To Be Used By Aics Staff Bid Ref No.: Itb No. Dswd12-cis-2024-06-012 Approved Budget For The Contract : ₱2,463,800.00 Do Not Open Before: 28 June 2024; 11:00 A.m. 21.2 No Further Instructions Section Iv. General Conditions Of Contract Notes On The General Conditions Of Contract The General Conditions Of Contract (gcc) In This Section, Read In Conjunction With The Special Conditions Of Contract In Section V And Other Documents Listed Therein, Should Be A Complete Document Expressing All The Rights And Obligations Of The Parties. Matters Governing Performance Of The Supplier, Payments Under The Contract, Or Matters Affecting The Risks, Rights, And Obligations Of The Parties Under The Contract Are Included In The Gcc And Special Conditions Of Contract. Any Complementary Information, Which May Be Needed, Shall Be Introduced Only Through The Special Conditions Of Contract. 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Vii (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Notes On The Special Conditions Of Contract Similar To The Bds, The Clauses In This Section Are Intended To Assist The Procuring Entity In Providing Contract-specific Information In Relation To Corresponding Clauses In The Gcc Found In Section Iv. The Special Conditions Of Contract (scc) Complement The Gcc, Specifying Contractual Requirements Linked To The Special Circumstances Of The Procuring Entity, The Procuring Entity’s Country, The Sector, And The Goods Purchased. In Preparing This Section, The Following Aspects Should Be Checked: A. Information That Complements Provisions Of The Gcc Must Be Incorporated. B. Amendments And/or Supplements To Provisions Of The Gcc As Necessitated By The Circumstances Of The Specific Purchase, Must Also Be Incorporated. However, No Special Condition Which Defeats Or Negates The General Intent And Purpose Of The Provisions Of The Gcc Should Be Incorporated Herein. Special Conditions Of Contract Gcc Clause Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: Delivery Term: One Time Delivery It Should Be 30 Days Upon Receipt Of Purchase Order (po) Place Of Delivery / Venue: Dswd Field Office Xii Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – Not Applicable Packaging – Not Applicable The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. Transportation – Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 The Terms Of Payment Shall Be As Follows: Partial Payment Must Correspond To The Value Of Goods Delivered And Accepted After The Appropriate Inspection And Acceptance Procedures. Proof Of Deliveries (delivery Receipts Or Acknowledgement Receipts) Must Be Signed By An Authorized Person To Support Claims For Payment. 4 The Inspections And Tests That Will Be Conducted By The Inspection (dswd Inspection Committee), Designated Inspectorate At The Regional Level, Final Acceptance By The Dswd Acceptance Committee, And End-user Section Vi. Schedule Of Requirements Dswd12-cis-2024-06-012 Procurement Of Supply And Delivery Of Office Equipment To Be Used By Aics Staff The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Laptop 35 Units 35 Units Delivery Of The Goods Is Required One Time Delivery And Within Thirty (30) Days Upon The Receipt Of The Purchase Order Operating System Windows 11 Pro Operating System Architecture 64-bit Processor & Chipset Processor Type Core™ I5 Processor Model Intel® Core™ I5-1240p Processor Processor Speed 1.7ghz Processor Speed (turbo) 2.0 To 4.4 Ghz Memory Standard Memory 16 Gb Storage Total Solid State Drive Capacity 512 Gb Solid State Drive Interface 512gb Nvme Ssd Display & Graphics Screen Size 35.6 Cm (14") Display Screen Technology Display With Ips (in-plane Switching) Technology Screen Resolution 2560 X 1440 Graphics Controller Manufacturer Intel® Graphics Controller Model Intel® Iris® Xe Graphics Graphics Memory Technology Open Gl Audio Hd Audio Yes Speakers Yes Number Of Speakers 2 Speakers Speaker Output Mode Stereo Network & Communication Wireless Lan Yes Wireless Lan Manufacturer Ntel® Wireless Wi-fi 6e Ax211 Wireless Lan Model Intel® Wireless Wi-fi 6e Ax211 Wireless Lan Standard Ieee 802.11 A/b/g/n+ac+ax Bluetooth Yes Built-in Devices Webcam Yes Webcam Resolution (front) 1920 X 1080 Resolution Microphone Yes Interfaces/ports Hdmi Yes Usb Yes Headphone Yes Battery Information Number Of Cells 3-cell Battery Battery Chemistry Lithium Ion (li-ion) Battery Capacity 56wh Maximum Battery Run Time 13 Hour Physical Characteristics Height 15.9mm Width 321mm Depth 210.8mm Warranty: 3 Years Parts- 3 Years Labor Only 3 Years Onsite (3-3-3) Note: >the Supplier Must Have Service Center Within The Region Xii Or Nearby Region For An Easy And Immidiate Response. >the Supplier Should Have A Satisfactory Performance On All It's On Going And Completed Contract. >the Item Delivered By The Supplier Found To Be Damage/broken/not Functional Or Factory Defect. Should Be Replaced Immidiately. Should Not To Be Repaired. >the Item Must Be In The Current Catalogue And Not End Of Life >certification Of Authorized Dealership Of The Bidder. >the Supplier Must Have A Physical Store Within The Region 12 Or Nearby The Region >warranty Certificate From The Brand Being Offered. >the Equipment Must Come From A Credible Manufacturer With Support Through A Distributor. >the Equipment Must Be Brand New And Unused >must Be International Brand Name With Existence Of At Least 10 Years In The Philippines. 2 Document Scanner 3 Units 3 Units Description Scan Speed: Resolution (colour/greyscale/mono): 200 Dpi: 35 Ppm / 70 Ipm 300 Dpi: 35 Ppm / 70 Ipm 600 Dpi: 12 Ppm / 24 Ipm Scan Function: Scanner Type: A4 Sheet-fed, One-pass Duplex Colour Scannersensor Type: Colour Contact Image Sensor Scanning Method: Fixed Carriage And Moving Document Light Source: Rgb Led Optical Resolution: 600 X 600 Dpi Output Resolution: 50 - 1,200 Dpi (1 Dpi Increments) Bit Depth:each Colour (rgb): 10 Bit Input / 8 Bit Output Min Document Size: 50.8 X 50.8 Mm Max Document Size: 215.9 X 6096 Mm Supported Paper Weight: 27 - 413 G/m2 (a8 Or Less 127 - 413 G/m2) Scan 2: Jpeg, Tiff, Multi-tiff, Pdf, Searchable Pdf, Bmp, Png Document Capture Pro (win): Jpeg, Bmp, Pdf, Searchable Pdf, Tiff, Multi-tiff, Png, Docx, Xlsx, Pptx Adf Capacity: 50 Sheets (80g/m2) Daily Scan Volume: Up To 4,000 Pages / Day Multi-feed Detection: Ultrasonic Sensor And Length Detection Weight: ≤ 3.7 Kg 1 Year Warranty 3 Printer 3 In 1 35 Units 35 Units Print, Scan, Copy Desired Technical Specification Ink Technology: Dye Ink Printing Resolution: 5760 X 1440 Dpi Printer Function: Print, Scan, Copy Printing Speed (iso) A4: 10 Pages/mins, 5 Pages/mins Coloured Droplet Size: 3pl With Variable Sized Droplet Technology Scan Single Sided A4 Colour: 200 Dpi, 32 Sec With Flatbed Scan Scan Resolution: 600 X 1200 Dpi 1 Year Warranty 4 Web Cam 35 Units 35 Units Technical Specifications Usage Scenario: Gaming Multimedia Interface: Wired Connector: Usb 2.0 Support Platform: Pc & Mac - Sharp Fhd (1920 X 1080) Video Output At A Smooth 30 Fps - Effectively Reduces Environmental Noise For Crystal-clear Video Calls, Even While Gaming - 90° Tilt? Adjustable Clip Fits A Variety Of Laptop Screens And Desktop Monitors, And 360° Rotation Mechanism Enables Flexible Camera Angles - Compatible With Popular Applications Such As Skype, Microsoft® Teams And Zoom - Wide Field Of View ? Perfect For Conferences, Telecommuting, Or Chats With Two Or More Parties Sitting Side-by-side 5 Money Counter 8 Units 8 Units With Uv+mg Detection, Fron Led Screen Display Counting Speed:1000 Bills Per Minutes L345mmxh205mm 8.2kg 6 Radio Walkie Talkie 100 Units 100 Units 2 Radio In 1 Set Features: Output: =<5w. Frequency (uhf): 400.00-470.00mhz. 16 Channels. Pc Program. Flashlight Function. 50 Ctcss And 105 Dcs Codes. Squelch Level. Battery Saving. Vox (voice Operated Transmitting) Function. Busy Channel Lock. Low Battery Warning. Over Voltage Or Low Voltage Protection. Channel Monitor. Tot (time-out Timer). 7 Wi-fi Router 10 Units 10 Units Security Network Security Spi Firewall Access Control Ip & Mac Binding Application Layer Gateway Guest Network 1× 5 Ghz Guest Network 1× 2.4 Ghz Guest Network Wifi Encryption Wpa Wpa2 Wap3 Wpa/wpa2-enterprise (802.1x) Wireless Standards Wi-fi 5 Ieee 802.11ac/n/a 5 Ghz Ieee 802.11n/b/g 2.4 Ghz Wifi Speeds Ac1200 Delivery Term: One Time Delivery It Should Be 30 Days Upon Receipt Of Purchase Order (po) Place Of Delivery / Venue: Dswd Field Office Xii General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed And Ongoing Government And Completed Projects For The Last Year; Any Unsatisfactory Performance Would Mean Disqualification In Accordance With The Rdc Resolution. Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ Section Vii. Technical Specifications Notes For Preparing The Technical Specifications A Set Of Precise And Clear Specifications Is A Prerequisite For Bidders To Respond Realistically And Competitively To The Requirements Of The Procuring Entity Without Qualifying Their Bids. In The Context Of Competitive Bidding, The Specifications (e.g. Production/delivery Schedule, Manpower Requirements, And After-sales Service/parts, Descriptions Of The Lots Or Items) Must Be Prepared To Permit The Widest Possible Competition And, At The Same Time, Present A Clear Statement Of The Required Standards Of Workmanship, Materials, And Performance Of The Goods And Services To Be Procured. Only If This Is Done Will The Objectives Of Transparency, Equity, Efficiency, Fairness, And Economy In Procurement Be Realized, Responsiveness Of Bids Be Ensured, And The Subsequent Task Of Bid Evaluation And Post-qualification Facilitated. The Specifications Should Require That All Items, Materials And Accessories To Be Included Or Incorporated In The Goods Be New, Unused, And Of The Most Recent Or Current Models, And That They Include Or Incorporate All Recent Improvements In Design And Materials Unless Otherwise Provided In The Contract. Samples Of Specifications From Previous Similar Procurements Are Useful In This Respect. The Use Of Metric Units Is Encouraged. Depending On The Complexity Of The Goods And The Repetitiveness Of The Type Of Procurement, It May Be Advantageous To Standardize The General Technical Specifications And Incorporate Them In A Separate Subsection. The General Technical Specifications Should Cover All Classes Of Workmanship, Materials, And Equipment Commonly Involved In Manufacturing Similar Goods. Deletions Or Addenda Should Then Adapt The General Technical Specifications To The Particular Procurement. Care Must Be Taken In Drafting Specifications To Ensure That They Are Not Restrictive. In The Specification Of Standards For Equipment, Materials, And Workmanship, Recognized Philippine And International Standards Should Be Used As Much As Possible. Where Other Particular Standards Are Used, Whether National Standards Or Other Standards, The Specifications Should State That Equipment, Materials, And Workmanship That Meet Other Authoritative Standards, And Which Ensure At Least A Substantially Equal Quality Than The Standards Mentioned, Will Also Be Acceptable. The Following Clause May Be Inserted In The Special Conditions Of Contract Or The Technical Specifications. Sample Clause: Equivalency Of Standards And Codes Wherever Reference Is Made In The Technical Specifications To Specific Standards And Codes To Be Met By The Goods And Materials To Be Furnished Or Tested, The Provisions Of The Latest Edition Or Revision Of The Relevant Standards And Codes Shall Apply, Unless Otherwise Expressly Stated In The Contract. Where Such Standards And Codes Are National Or Relate To A Particular Country Or Region, Other Authoritative Standards That Ensure Substantial Equivalence To The Standards And Codes Specified Will Be Acceptable. Reference To Brand Name And Catalogue Number Should Be Avoided As Far As Possible; Where Unavoidable They Should Always Be Followed By The Words “or At Least Equivalent.” References To Brand Names Cannot Be Used When The Funding Source Is The Gop. Where Appropriate, Drawings, Including Site Plans As Required, May Be Furnished By The Procuring Entity With The Bidding Documents. Similarly, The Supplier May Be Requested To Provide Drawings Or Samples Either With Its Bid Or For Prior Review By The Procuring Entity During Contract Execution. Bidders Are Also Required, As Part Of The Technical Specifications, To Complete Their Statement Of Compliance Demonstrating How The Items Comply With The Specification. Technical Specifications A. Dswd12-cis-2024-06-012 Procurement Of Supply And Delivery Of Office Equipment To Be Used By Aics Staff Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Laptop Operating System Windows 11 Pro Operating System Architecture 64-bit Processor & Chipset Processor Type Core™ I5 Processor Model Intel® Core™ I5-1240p Processor Processor Speed 1.7ghz Processor Speed (turbo) 2.0 To 4.4 Ghz Memory Standard Memory 16 Gb Storage Total Solid State Drive Capacity 512 Gb Solid State Drive Interface 512gb Nvme Ssd Display & Graphics Screen Size 35.6 Cm (14") Display Screen Technology Display With Ips (in-plane Switching) Technology Screen Resolution 2560 X 1440 Graphics Controller Manufacturer Intel® Graphics Controller Model Intel® Iris® Xe Graphics Graphics Memory Technology Open Gl Audio Hd Audio Yes Speakers Yes Number Of Speakers 2 Speakers Speaker Output Mode Stereo Network & Communication Wireless Lan Yes Wireless Lan Manufacturer Ntel® Wireless Wi-fi 6e Ax211 Wireless Lan Model Intel® Wireless Wi-fi 6e Ax211 Wireless Lan Standard Ieee 802.11 A/b/g/n+ac+ax Bluetooth Yes Built-in Devices Webcam Yes Webcam Resolution (front) 1920 X 1080 Resolution Microphone Yes Interfaces/ports Hdmi Yes Usb Yes Headphone Yes Battery Information Number Of Cells 3-cell Battery Battery Chemistry Lithium Ion (li-ion) Battery Capacity 56wh Maximum Battery Run Time 13 Hour Physical Characteristics Height 15.9mm Width 321mm Depth 210.8mm Warranty: 3 Years Parts- 3 Years Labor Only 3 Years Onsite (3-3-3) Note: >the Supplier Must Have Service Center Within The Region Xii Or Nearby Region For An Easy And Immidiate Response. >the Supplier Should Have A Satisfactory Performance On All It's On Going And Completed Contract. >the Item Delivered By The Supplier Found To Be Damage/broken/not Functional Or Factory Defect. Should Be Replaced Immidiately. Should Not To Be Repaired. >the Item Must Be In The Current Catalogue And Not End Of Life >certification Of Authorized Dealership Of The Bidder. >the Supplier Must Have A Physical Store Within The Region 12 Or Nearby The Region >warranty Certificate From The Brand Being Offered. >the Equipment Must Come From A Credible Manufacturer With Support Through A Distributor. >the Equipment Must Be Brand New And Unused >must Be International Brand Name With Existence Of At Least 10 Years In The Philippines. 2 Document Scanner Description Scan Speed: Resolution (colour/greyscale/mono): 200 Dpi: 35 Ppm / 70 Ipm 300 Dpi: 35 Ppm / 70 Ipm 600 Dpi: 12 Ppm / 24 Ipm Scan Function: Scanner Type: A4 Sheet-fed, One-pass Duplex Colour Scannersensor Type: Colour Contact Image Sensor Scanning Method: Fixed Carriage And Moving Document Light Source: Rgb Led Optical Resolution: 600 X 600 Dpi Output Resolution: 50 - 1,200 Dpi (1 Dpi Increments) Bit Depth:each Colour (rgb): 10 Bit Input / 8 Bit Output Min Document Size: 50.8 X 50.8 Mm Max Document Size: 215.9 X 6096 Mm Supported Paper Weight: 27 - 413 G/m2 (a8 Or Less 127 - 413 G/m2) Scan 2: Jpeg, Tiff, Multi-tiff, Pdf, Searchable Pdf, Bmp, Png Document Capture Pro (win): Jpeg, Bmp, Pdf, Searchable Pdf, Tiff, Multi-tiff, Png, Docx, Xlsx, Pptx Adf Capacity: 50 Sheets (80g/m2) Daily Scan Volume: Up To 4,000 Pages / Day Multi-feed Detection: Ultrasonic Sensor And Length Detection Weight: ≤ 3.7 Kg 1 Year Warranty 3 Printer 3 In 1 Print, Scan, Copy Desired Technical Specification Ink Technology: Dye Ink Printing Resolution: 5760 X 1440 Dpi Printer Function: Print, Scan, Copy Printing Speed (iso) A4: 10 Pages/mins, 5 Pages/mins Coloured Droplet Size: 3pl With Variable Sized Droplet Technology Scan Single Sided A4 Colour: 200 Dpi, 32 Sec With Flatbed Scan Scan Resolution: 600 X 1200 Dpi 1 Year Warranty 4 Web Cam Technical Specifications Usage Scenario: Gaming Multimedia Interface: Wired Connector: Usb 2.0 Support Platform: Pc & Mac - Sharp Fhd (1920 X 1080) Video Output At A Smooth 30 Fps - Effectively Reduces Environmental Noise For Crystal-clear Video Calls, Even While Gaming - 90° Tilt? Adjustable Clip Fits A Variety Of Laptop Screens And Desktop Monitors, And 360° Rotation Mechanism Enables Flexible Camera Angles - Compatible With Popular Applications Such As Skype, Microsoft® Teams And Zoom - Wide Field Of View ? Perfect For Conferences, Telecommuting, Or Chats With Two Or More Parties Sitting Side-by-side 5 Money Counter With Uv+mg Detection, Fron Led Screen Display Counting Speed:1000 Bills Per Minutes L345mmxh205mm 8.2kg 6 Radio Walkie Talkie 2 Radio In 1 Set Features: Output: =<5w. Frequency (uhf): 400.00-470.00mhz. 16 Channels. Pc Program. Flashlight Function. 50 Ctcss And 105 Dcs Codes. Squelch Level. Battery Saving. Vox (voice Operated Transmitting) Function. Busy Channel Lock. Low Battery Warning. Over Voltage Or Low Voltage Protection. Channel Monitor. Tot (time-out Timer). 7 Wi-fi Router Security Network Security Spi Firewall Access Control Ip & Mac Binding Application Layer Gateway Guest Network 1× 5 Ghz Guest Network 1× 2.4 Ghz Guest Network Wifi Encryption Wpa Wpa2 Wap3 Wpa/wpa2-enterprise (802.1x) Wireless Standards Wi-fi 5 Ieee 802.11ac/n/a 5 Ghz Ieee 802.11n/b/g 2.4 Ghz Wifi Speeds Ac1200 Delivery Term: One Time Delivery It Should Be 30 Days Upon Receipt Of Purchase Order (po) Place Of Delivery / Venue: Dswd Field Office Xii General Requirements: The Supplier Must Attach A Certification Of Satisfactory Performance For All Its Completed And Ongoing Government And Completed Projects For The Last Year; Any Unsatisfactory Performance Would Mean Disqualification In Accordance With The Rdc Resolution. Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ Section Viii. Checklist Of Technical And Financial Documents Notes On The Checklist Of Technical And Financial Documents The Prescribed Documents In The Checklist Are Mandatory To Be Submitted In The Bid, But Shall Be Subject To The Following: A. Gppb Resolution No. 09-2020 On The Efficient Procurement Measures During A State Of Calamity Or Other Similar Issuances That Shall Allow The Use Of Alternate Documents In Lieu Of The Mandated Requirements; Or B. Any Subsequent Gppb Issuances Adjusting The Documentary Requirements After The Effectivity Of The Adoption Of The Pbds. The Bac Shall Be Checking The Submitted Documents Of Each Bidder Against This Checklist To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion Pursuant To Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (k) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (l) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.

Details: Description 1. 2 Pcs. 16port Switch Unmanaged Specifications: 16 10/100/1000mbps Ports / Innovative Energy-efficient Technology Saves Power Consumption / Supports Mac Address Self-learning, Auto Mdi/mdix And Auto-negotiation / Plug & Play Design 2. 20 Pcs. Atx Casing W/ 500w Psu Specifications: Support Mini-itx, Microatx, And Atx Supports Up To 6 Fans, Including One 120mm Fan In The Front ,air Vents On The Side Panel For Great Ventilation, Supports Up To 1 Odd, 3 Hdds, And 2 Ssds Slot For Great Expandability Supports High-end Graphics Cards Up To 322mm / 12.7 Inch 3. 4 Pcs. Barcode Scanner Voyager Single Line Lase Specifications: Applications: Retail / Point Of Sale Decode Capability: 1d/2d Brightness: 0 - 100000 Lux Scan Pattern: Area Image Motion Tolerance: 70 Cm/s (27.6 In/s) For 13 Mil Upc At Optimal Focus Scanning Range: Standard Range (sr) Engine Type: 2d Aimer Type: Led Interface: Usb Tumble Specifications: 1,000 0.5 M (1.6 Ft) Tumbles Drop Specifications: 30 1.8 M (6 Ft) Drops To Concrete Protection Ratings: Ip52 Power Connector Type: Corded 4. 2 Pcs. Battery Charger 12v 24v Specifications: Material: Metal Output: 12v-24v Input: 130v-250v Charging Current: 4000ma Input Related Power: 400w Output Current: 12v-40a/24v-20a Input Cable Length: 110cm/43.23inch Item Size: 18*14.5*7cm/inch(l*w*h) Net Weight: 1200g/42.33oz 5. 10 Packs. Cable Tie (black) Specifications: Nylon Cable Tie 4 X 250 Mm 100 Pcs Per Pack-black 6. 20 Pcs. Contact Cleaner 400ml Contact Cleaner Is A Non-cfc, Non-hcfc Cleaning Solvent For General Industrial And Maintenance Use. It Effectively Dissolves And Removes Dust, Dirt, Grime, Grease, Tar, Adhesives And Flux From Electrical And Electronic Contact Points. It Is Quick Drying And Evaporates Without Leaving Any Residue. This Product Is Suitable For Use On Electronic Parts, Metal And Most Plastics. 7. 2 Pcs. Digital Multimeter, Portable 6000 Counts Auto Specifications: Material:abs Color:gray Sample Rate: 3 Times Per Second Display:6000 Counts Auto Range:yes True Rms:yes Date Hold:yes Low Voltage Indication:yes Auto Power Off:yes Over Range Indication:ol Backlight:yes Diode Test:yes Continuity Test:yes Main Measurements:ac/dc Voltage,ac/dc Current,resistance,capacitance,frequency,duty Cycle,diode,continuity Testing And Temperature. Dc Volts:60mv/600mv±(0.5%+3),6v/60v/600v/1000v±(0.5%+3) Ac Volts:6v/60v/600v/750v±(1.0%+3),60mv/600mv±(1.0%+3) Dc Current:6a/10a±(1.2%+3),60ma/600ma±(1.2%+3) Ac Current:6a/10a±(1.5%+3),60ma/600ma±(1.5%+3) Resistance:600ω/6kω/60kω/600kω/6mω±(0.5%+3),60mω±(1.5%+3) Capacitance:9.999nf±(5.0%+20) 99.99nf/999.9nf/9.999μf/99.99μf/999.9μf±(2.0%+5) 9.999mf±(5.0%+5) Frequency:99.99hz/999.9hz/9.999khz/99.99khz/999.9khz/9.999mhz±(0.1%+2) Duty Cycle:1%~99%±( 0.1%+2) Temperature:(-20~1000)°±(2.5%+5) (-4~1832)°±(2.5%+5) Working Environment: 0~40c, Relative Humidity<75% Supply Power:1.5v Aaa Battery * 2 (not Included) Product Weight:127g Product Size:125mm * 65mm * 24 Mm Package Size:16 * 9.7 * 4.5cm / 6.3 * 3.8 * 1.8in Package Weight:251g/0.55lb 8. 15 Pcs. Fingerprint Scanner Specifications: Fips 201 Piv Certified Low Power Consumption Fine-grained Power Control Compact Size Landing Lights For Finger Tracking Red/green Status Leds Blue Illumination 500dpi And 1000dpi Images High-durability Glass Top Surface Ip64-rated Top Surface Sealed Against Dust And Liquid High Quality Fingerprint Image Counterfeit Finger Rejection Drivers And Sdks For Windows, Windows Ce, Linux 9. 2 Pcs. Fish Tape Reel Wire Cable Puller 30m Specifications: Type:cable Pullercolor:black+redmaterial: Nylon Fiberglass +abslength: 15/20/30m （optional）pack Size: 380 * 290 * 35mmapplication: For Pulling Wire And Cablepacking List:1 * Wire Puller 10. 5 Pcs. Graphics Card 4gb 1650 Oc Specifications: Powered By Geforce® Gtx 1650 Nvidia Turing™ Architecture And Geforce Experience™ Integrated With 4gb Gddr5 128-bit Memory Interface Windforce 2x Cooling System With Alternate Spinning Fans 80 Mm Unique Blade Fan Core Clock 1710 Mhz (reference Card Is 1665 Mhz) 11. 5 Pcs. Hdmi 3mtrs Specifications: Temperature Resistance, Withstand Voltage, Anti-oxidation. Low Lead And Low Cadmium Environmental Protection Materials. High Quality Pvc Coating, Wear Resistant, Acid And Alkali Resistant, Flexible And With Long Strong Service Life. Suitable For :lcd Tv, Projector, Game Console, Computer, Set-top Box 12. 2 Pcs. Hdmi4k 60m Extender W/ Power Supply Specifications: Length Of Cat5e/cat6 Cable Between Rx And Tx: 60 / 100 / 120 Meters Hdmi Input: 4k/1080p/720p/576p/576i/480p/480i Hdmi Output: 4k/1080p/720p/576p/576i/480p/480i / 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i Max Bandwidth: 340mhz Max Baud Rate: 3x3.4gbps Input Video Signal: 0.5~1.5volts P-p Output Ddc Signal: 5volts P-p (ttl) Input Hdmi Cable Distance: ≤10m Awg26 Hdmi Standard Cable Output Hdmi Cable Distance: ≤10m Awg26 Hdmi Standard Cable Tx Max Working Current: 350ma Rx Max Working Current: 200ma Power Adapter Format: Input:ac (50hz, 60hz) 100v-240v; Output: Dc5v/1a Operating Temperature Range: (0 To +45℃) / (-15 To +55℃) Operating Humidity Range: 5 To 90%rh (no Condensation) Dimension (l X W X H): 84x47x22(mm) / 81x47x22(mm) Tx Weight: 101g Rx Weight: 101g 13. 29 Pcs. Keyboard/ Mouse Combo Wired Specifications: Keycaps: Traditional Hotkeys: 12 Fn Multimedia Hotkeys Character: Laser Engraving Splash Proof: Yes Adjustable Keyboard Legs: Yes Rating: 5 V / 100 Ma Cable Length: 150 Cm Hardware Connectivity: Usb Illuminated: No Mouse: Op-330 / Op-330s Type: Wired Ergonomic Design: Symmetric Sensor: Optical Resolution: 1200 Dpi Buttons No.: 3 Port: Usb Cable Length: 150 Cm Mouse Weight: 85 G (w/ Cable) System Requirements: Windows 7 / 8 / 8.1 / 10 14. 2 Pcs. Lan Network Lcd Phone Telephone Wire Tracker Specifications: Lan Network Length Cable Tester Lcd Phone Telephone Wire Tracker For Ping / Poe Bnc Rj45 Rj11 Line Testing Poe Function: Identify Which Pins Are Providing Power And Detect How Much Voltage Ping Function To Test Network Performance, Data Packet, Min & Max Time Tone Trace Cable With Complete Ac Interference Rejection Hub Blink For Locating Network Port By The Flashing Port Light On Hub / Switch Tf Function To Import And Export Data From Comupter (160 Sets, Txt Format) Poe Function: Identify Which Pins Are Providing Power And Detect How Much Voltage Ping Function To Test Network Performance, Data Packet, Min & Max Time Tone Trace Cable With Complete Ac Interference Rejection Hub Blink For Locating Network Port By The Flashing Port Light On Hub / Switch Tf Function To Import And Export Data From Comupter (160 Sets, Txt Format) 15. 2 Pcs. Label Printer Black Specifications: Accepts 6mm, 9mm, 12mm And 18mm Tape Widths Support 14 Font Types, 87 Frames And 780 Symbols Support Barcode Printing Backlit Lcd Screen For A Clearer View Store Up To 50 Custom Label Designs For Instant Recall 16. 2 Pcs. Laser Rangefinder 300ft/100m Backlit Lcd Screen Specifications: Power Source: 3.7v 850mah Lithium Battery Measuring Accuracy: ±2mm(±1/16inch) Angle Range:±90° Working Range：100m Display Style：backlit Lcd Measuring Units: M/in/ft Mount Size: 1/4"-20 Recharge : Usb Charging 17. 3 Pcs. Magnetic Access Control Electric Door Lock Id (kit) Specifications: This Rfid Proximity Access Controller Using Proximity System Is One Of The Modern Access Control Systems. The State-of-the-art Cpu And Integrated Circuit Techniques Are Applied To Keep All The Data From Loss Due To Power Failure. It Is Powerful And Can Open The Door Using Proximity Cards, Passwords, Or The Hybrid. The Access Controller Can Provide Users With More Convenience By Connecting To Terminals, Including The Button For Opening The Door, Doorbell, And Electric Lock That Is Normally Open Or Closed. This Product Offers A Method For Controlling Access Safely And Automatically, Qualifying It As An Ideal Equipment For Businesses, Offices, Factories, And Communities. Maximum Card Distance: 10-15cm Features: This Rfid Proximity Access Controller Using Proximity System Is One Of The Modern Access Control Systems. The State-of-the-art Cpu And Integrated Circuit Techniques Are Applied To Keep All The Data From Loss Due To Power Failure. It Is Powerful And Can Open The Door Using Proximity Cards, Passwords, Or The Hybrid. The Access Controller Can Provide Users With More Convenience By Connecting To Terminals, Including The Button For Opening The Door, Doorbell, And Electric Lock That Is Normally Open Or Closed. This Product Offers A Method For Controlling Access Safely And Automatically, Qualifying It As An Ideal Equipment For Businesses, Offices, Factories, And Communities.electric Magnetic Lock Specifications: Lock Size: Approx. 115*115*20mm Net Weight: Approx. 122g Voltage: Dc+8v-15v(standard Dc12v) Current: Undrive The Lock: ≤70ma; Open The Lock: ≤1000ma Working Temperature: -10℃-70℃ Working Humidity: 0-100% Frequency: 125khz(em Card) 13.56mhz(m1 Card) Maximum Card Distance: 10-15cm Verification Methods: Cards, Passwords Initial Programming Password: 123456power Supply Specifications: Net Weight: Approx. 290g Size: Approx. 115*68*34mm/4.52*2.67*1.33'' Input Voltage: 110-240v Ac Input Frequency: 50-60hz Output Voltage: Dc 12v Output Current: 3apush Release Button Exit Switch Specifications: Size: Approx. 85*85*35mm/3.34*3.34*1.37'' Net Weight: Approx. 57gcontrol System Keypad Specifications: Size: Approx. 170*40*22mm/6.69*1.57*0.86'' Net Weight: Approx. 870gnote: Please Allow 1-3mm Differs Due To Manual Measurement. Due To The Different Display And Different Light, The Picture May Not Reflect The Actual Color Of The Item. Thanks For Your Understanding. 18. 10 Pcs. Memory Ddr4 16gb 3200mhz With Heatsink Specifications: Internal Memory: 8 Gb Internal Memory Type: Ddr4 Clock Memory Speed: 3200 Mhz Component For: Pc / Server Memory Factor Form: 288-pin Dimm Memory Design (modules X Size): 1 X 4 Gb Cas Latency: 15 Memory Voltage: 1.2 V Lead Plate: Gold Module Configuration: 512m X 64 Row Cycle Time: 45 Ns Row Cycle Update Time: 260 Ns Active Time In Line: 29,125 Ns Spd Profile: Yes Intel® Extreme Memory Profile (xmp): Yes Memory Type: Pc-19200 Memory Without Buffer: Yes Compatible Chipset: Intel X99 Memory Rating: 1 19. 60 Pcs. Memory Ddr4 8gb 3200mhz With Heatsink Specifications: Internal Memory: 8 Gb Internal Memory Type: Ddr4 Clock Memory Speed: 3200 Mhz Component For: Pc / Server Memory Factor Form: 288-pin Dimm Memory Design (modules X Size): 1 X 4 Gb Cas Latency: 15 Memory Voltage: 1.2 V Lead Plate: Gold Module Configuration: 512m X 64 Row Cycle Time: 45 Ns Row Cycle Update Time: 260 Ns Active Time In Line: 29,125 Ns Spd Profile: Yes Intel® Extreme Memory Profile (xmp): Yes Memory Type: Pc-19200 Memory Without Buffer: Yes Compatible Chipset: Intel X99 Memory Rating: 1 20. 50 Pcs. Monitor 1080p 70hz 24"~24" Ips Panel Hdmi Vga Specifications: Screen Size (class): 24 Flat / Curved: Flat Active Display Size (hxv) (mm): 527.04 X 296.46 Mm Aspect Ratio: 16:9 Panel Type: Ips Brightness (typical): 250 Cd/㎡ Brightness (min): 200 Cd/㎡ Contrast Ratio Static: 1000:1(typical) Resolution: 1,920 X 1,080 Response Time: 5 (gtg） Viewing Angle (h/v): 178°/178° Color Support: Max 16.7m Color Gamut (ntsc 1976): 72% (cie 1931) Refresh Rate: Max 75hz 21. 45 Pcs. Motherboard (m.2 Slot) Specifications: Processor Support Intel® Core™ 14th/ 13th/ 12th Gen Processors, Intel® Pentium® Gold And Celeron® Processors 1 Processor Socket Lga1700 Please Go To Www.msi.com To Get The Newest Support Status As New Processors Are Released. See Supported Processors Chipset Intel® H610 Chipset Memory 2x Ddr4 Memory Slots, Support Up To 64gb 1 Supports 1r 2133/ 2666/ 2933/ 3200 Mhz (by Jedec & Por) Supports Dual-channel Mode Supports Non-ecc, Un-buffered Memory Please Refer To Www.msi.com For More Information On Compatible Memory. See Supported Memory Expansion Slot 1x Pcie X16 Slot (from Cpu) Supports Up To Pcie 4.0 X16 1x Pcie X1 Slot Supports Pcie 3.0 X1 1x M.2 Slot With E-key For Pcie Wifi Module Only (m2_wifi1) Onboard Graphics 1x Hdmi™ 2.1 With Hdr Port, Supports A Maximum Resolution Of 4k 60hz 1 / 2 1x Vga Port, Supports A Maximum Resolution Of 2048x1536 50hz, 2048x1280 60hz, 1920x1200 60hz 1 / 2 Available Only On Processors Featuring Integrated Graphics.graphics Specifications May Vary Depending On The Cpu Installed. Sata Ports 4x Sata 6gb/s Ports1 Sata7 Will Be Unavailable When Installing M.2 Sata Ssd In The M2_1 Slot. M.2 Ssd Slot 1x M.2 Slot (key M, From Chipset) 1 Supports Up To Pcie 3.0 X4 Supports Up To Sata 6gb/s Supports 2242/ 2260/ 2280 Storage Devices Supports Intel® Smart Response Technology For Intel Core™ Processors Sata7 Will Be Unavailable When Installing M.2 Sata Ssd In The M2_1 Slot Audio Realtek® Alc892/ Alc897 Codec 7.1-channel High Definition Audio Lan 1x Intel® I219v 1gbps Lan Controller Power Connectors 1x 24-pin Atx Main Power Connector 1x 8-pin Atx 12v Power Connector Usb Intel® H610 Chipset 4x Usb 3.2 Gen 1 5gbps Ports (2 Type-a Ports On The Back Panel, 2 Ports Available Through The Internal Usb Connector) 6x Usb 2.0 Ports (4 Type-a Ports On The Back Panel(hub-gl850g), 2 Ports Available Through The Internal Usb 2.0 Connector) Fan Connectors 1x 4-pin Cpu Fan Connector 1x 4-pin System Fan Connector System Connectors 1x Front Panel Audio Connector 2x System Panel Connectors 1x Chassis Intrusion Connector 1x Tpm Module Connector Jumpers 1x Clear Cmos Jumper Led Features 4x Ez Debug Led Back Panel Ports Hdmi™ Vga Keyboard/mouse Usb 3.2 Gen 1 5gbps Type-a Lan Port Audio Connector Usb 2.0 22. 20 Pcs. Power Supply 500 Watts 80+ Specifications: Dc Output: 500w Power Density: 277w Per Liter Load Range: +3.3v +5v +12v +5vsb -12v (amps): 18a 17a 38a 2.5a 0.3a Peak (amps): (amps): 0a 0a 0a 0a 0a Range (%): ±5% ±5% ±5% ±5% ±10% Line Reg.(%): ±1% ±1% ±1% ±1% ±1% Ripple(mvp-p): 50mv 50mv 120mv 50mv 120mv Combined +3.3v & +5v: 110w Combined +12v: 456w Input Voltage: 180 ~ 264vrms Input Frequency Range: 47hz ~ 63hz Pfc : Active Pfc.（pf>0.9 At Full Load） Efficiency: 82%~85% @ 20% ~ 100% Loading Mtbf: 100,000 Hours Operating Temperature: 0°c ~ 40°c Protection: Over Power Protection Over Voltage Protection Short Circuit Protection Connectors 1 X 24 / 20-pin Motherboard Connector（500mm） 1 X 8 / 4-pin Eps / Atx 12v Connector（750mm） 2 X 8 / 6-pin Pcie Connector（"500mm / 150mm"） 2 X Sata Connector And 1 X 4-pin Peripheral Connector And 1 X 4-pin Floppy Connector （500mm / 150mm / 150mm / 150mm） 2 X Sata Connector And 2 X 4-pin Peripheral Connector（500mm / 150mm / 150mm / 150mm） Cooling System: Silent 120mm Fan Noise Level : 18 Dba Minimum Dimension: 150 Mm (w) X 86 Mm (h) X 140 Mm (d): 5.91" (w) X 3.39" (h) X 5.51" (d) Weight: 1.31kg Certification: 80 Plus Other: Gpu Support List Compatible With Atx12v V2.4 Features: High Efficiency With 80 Plus Certifications 24/7 Continuous Power Output With 40℃ Operating Temperature Class-leading Single +12v Rail Active Pfc Circuitry Pci-e 8pin And Pci-e 6pin Connector Support Silent Running 120mm Fan With 18dbap Powerful Single +12 Rail Design, Perfect For The Future High-end Component Upgrades Or Overclocking 23. 40 Pcs. Processor 4 Cores 8 Threads With Cpu Fan Specifications: • 4 Cores (4 P-cores + 0 E-cores) And 8 Threads. • Performance Hybrid Architecture Integrates Two Core Microarchitectures, Prioritizing And Distributing Workloads To Optimize Performance • Up To 4.5 Ghz. 12m Cache • Turbo Boost Max Technology 3.0, And Pcie 5.0 & 4.0 Support. Optane Memory Support. Laminar Rh1 Cooler Included 24. 5 Pcs. Punch Down Tool Specifications: Type: Wire Tracker Origin: Mainland China Certification: Rohs Features 1: For Keystone Jack Features 2: Network Impact Tool Features 3: Punch Down Tool Features 4: Insert Cutter Cable Terminat Features 5: Rj45 Tool Features 6: Double Cutter Head Design Features 7: 110 Blade Type: 110 Idc 25. 6 Boxes. Rj45 Pass Through (100pcs Per/box) Specifications: 100pcs Rj45 Metal Pass Through Description: They Are Really 100% Brand New With High Quality Ez Rj45 Cat6 Pass Through( Open End ) 8p8c Modular Plug Lan Network Connector. Ez Rj45 Design Allows The Wires To Pass Through The Connector So The Twists In Each Pair Can Be Pulled Closer To The Contacts Than Conventional Plug. Maintaining The Twists To The Point Of Termination Significantly Decreases Crosstalk And Markedly Increases Performance. Fully Shielded Products Provide Reduced Pair-to-pair Crosstalk, Alien Crosstalkand Considerably Improved Immunity To Noise At All Frequencies. Substantially Improve Noise Immunity At All Frequencies, Especially Above 30 Mhz 26. 5 Pcs. Router Dual Band Wi-fi 6 Mu-mimo Gigabit Specifications: Next-gen Gigabit Wi-fi 6 Speed—2402 Mbps On 5 Ghz And 574 Mbps On 2.4 Ghz Band Ensure Smoother Streaming And Faster Downloads. Connect More Devices—ofdma Technology Increases Capacity By 4 Times To Enable Simultaneous Transmission To More Devices. Ultra-low Latency—enables More Responsive Gaming And Video Chatting. Expanded Wi-fi Coverage—four High-gain External Antennas And Beamforming Technology Combine To Extend Strong, Reliable Wi-fi Throughout Your Home. Tp-link Homeshield - Enhanced Security Defends Against The Latest Cyber Threats. Improved Battery Life—target Wake Time Helps Your Devices To Communicate More While Consuming Less Power. Compatible With Alexa—control Your Router Via Voice Commands And Make Your Life Smarter And Easier With Amazon Alexa. 27. 29 Pcs. Solid State Drive 480gb 2.5" Sata Specifications: Form Factor: 2.5" Max Sequential Read: Up To 535 Mbps Max Sequential Write: Up To 445 Mbps Interface: Sata Revision 3.0 (6 Gb/s) Operating Temperature: 32ºf To 158ºf (0ºc To 70 ºc) Vibration: 5 Grms, 10-2000 Hz / 4.9 Grms, 7-800 Hz Shock: Resistant Up To 1500g More Than 20x Better Performance Than Typical Hdd Device Type: Internal Solid State Drive (ssd) All Data Storage Are Not Exact In Stated Capacity. All Electronic Storage Has Hidden Partitions For Its Functions Tools. All These Hidden Partitions Will Not Be Shown In Windows Explorer, And Disk Management Does Not Give An Option To Browse Contents Of These Partitions. Also, The Binary Measurement Is Different And Not Eaxct For Units Stated Capacity. You May Research For It For More Info. Based On Internal Testing; Performance May Be Lower Depending On Host Device, Interface, Usage Conditions And Other Factors. 28. 45 Pcs. Solid State Drive 500gb M.2 Nvme 2280 Specifications: Gen 4x4 Nvme Pcie Performance Up To 3,500mb/s Read, 2,100mb/s Write Cloning Software Not Included Part Number: Snv2s/500g Specifications Form Factor M.2 2280 Interface Pcie 4.0 X4 Nvme Capacities 500gb Sequential Read/write 500gb – 3,500/2,100mb/s Endurance (total Bytes Written) 500gb – 160tb Storage Temperature -40°c~85°c Operating Temperature 0°c~70°c Dimensions 22mm X 80mm X 2.2mm Weight 7g (all Capacities) Vibration Operating 2.17g (7-800 Hz) Vibration Non-operating 20g (20-1000hz) Mtbf 1,500,000 Hours 29. 5 Pcs. Type C Usb Hub 7 In 1 Specifications: 7-in-1 Hdmi Rj45 Model : Hdmi + Rj45 + Sd + Tf + 2*usb3.0 + Pd 30. 50 Pcs. Uninterrupted Power Supply (ups) 650va 230v Specifications: Output Max Configurable Power (watts) 375 Watts / 650va Output Frequency (sync To Mains) 50/60 Hz +/- 1 Hz Unsynchronised Topology Line Interactive Waveform Typestepped Approximation To A Sinewave Transfer Time6 Ms Typical : 10 Ms Maximum Input Input Frequency50/60 Hz +/- 5 Hz Auto-sensing Input Voltage Range For Main Operations170 – 280v Number Of Power Cords 1 Batteries & Runtime Battery Type Lead-acid Battery Typical Recharge Time 8 Hour(s) Nominal Battery Voltage12 V Expected Battery Life 3 – 5 Communications & Management Control Panelled Status Display With On Line : On Battery Audible Alarm Alarm When On Battery : Distinctive Low Battery Alarm Surge Protection And Filtering Surge Energy Rating156joules Physical Maximum Height 93mm, 9.25cm Maximum Width 161mm, 16.05cm Maximum Depth 305mm, 30.5cm Net Weight 4.5kg 31. 50 Pcs. Ups Battery 12v, 7.2ah Specifications: Ups Battery Heavier Build Thicker And Better Terminals Flame Retardant Voltage: 12 Volts Capacity: 7.2 Ampere Valve Regulated Sealed Lead-acid Battery 32. 2 Boxes. Utp Cable Cat5e (305m/box) Specifications: Number Of Pairs: 4 Total Number Of Conductors: 8 Awg: 24 Stranding: Solid Conductor Material: Bc - Bare Copper Insulation Material: Po - Polyolefin Outer Shield Material: Unshielded Outer Jacket Material: Pvc - Polyvinyl Chloride Plenum (y/n): N Plenum Number: Bl-1585a Tested To 100mhz And Meets Or Exceeds The Tia/eia 568a Standard And Is Third Party Party Verified.24 Awg Solid Bare Copper, 4 Twisted Pairs, Jacket Sequentially Marked At Two Foot Intervals.suitable Applications: Premise Horizontal Cable,gigabit Ethernet,100basetx,100basevg Anylan,155atm,622atm,ntsc/pal Component Or Composite Video,aes/ebu Digital Video,rs-422. Cat5e (200mhz), 4-pair, U/utp-unshielded, Riser-cmr, Premise Horizontal Cable, 24 Awg Solid Bare Copper Conductors, Polyolefin Insulation, Ripcord, Pvc Jacket. 33. 50 Pcs. Vga To Hdmi Adapter Specifications: Hdmi Input : The Hdmi Input Interface Vga Output:vga Signal Output Interface Hdmi To Vga Cable Converts Hdmi Digital Video And Audio Signals Into Analog Of The Vga Interface And Audio Output. Convert The Hdmi Output Port On Your Envy Or Voodoo Laptop To An Analog Vga Input With The Hdmi To Vga Conversion Adapter. It Supports Full-size High-definition Resolution Of 720p Or 1080p. Can Use For All Hdmi Input And Vga Output Device. Computer Accessories For Computer Set For Desktop Computer Set 34. 10 Pcs. Web Cam Full Hd 1080p Specifications: Full Hd 1080p, 1920*1080 Pixels | Full Hd Glass Lens | 70 Degrees | Fixed Focus | 60cm And Beyond | Digital Hd Omni-directional Mic | Color Black 35. 10 Pcs. Wireless Device Dual 2.4hz/ 5ghz Specifications: Product Name Wireless Usb Adapter Wi-fi Dongle 2.4ghz And 5.0ghz Ac600 Plug It Forget It Dual Band Wi-fi Model: Archer T2u Interface: Usb 2.0 Dimensions ( W X D X H )15*7.1*18.6mm Antenna Type: Omni Directional High Speed Wifi – Up To 600mbps Speeds With 200mbps On 2.4ghz And 433 Mbps On 5ghz, Upgrades Your Devices To Higher Ac Wifi Speeds. Dual Band Wireless – 2.4ghz And 5ghz Band For Flexible Connectivity, Upgrades Your Devices To Work With The Latest Dual-band Wifi Router For Faster Speed And Extended Range. Nano Design – Small, Unobtrusive Design Allows You To Plug It In And Forget It Is Even There Operating System – Supports Windows 10/8.1/8/7/xp, Mac Os X Advanced Security – Supports 64/128-bit Wep, Wpa/wpa2, And Wpa-psk/wpa2-psk Encryption Standards Note: 1. All Items With One (1) Year Warranty 2. Bidder Shall Bid For The Entire Lot. Bid For Selected Lot Only Will Be Disqualified. Invitation To Bid For This Project Is Also Posted At Www.cavite.gov.ph

Details: The subject of the Public Contract are Services Consisting of Ensuring the Operation of the Collection, Collection, Transport, Sorting, Utilization of Waste or Removal of Municipal Waste. The subject of the Services for Natural Persons and Originators involved in the City's Waste Management System is: A) Regular Collection and Energy Utilization/removal of All Mixed Municipal Waste Cat. Number 200301 "house from house" According to Appendix No. 1 of the Contract From the Territory of the City of Chýné B) Regular Collection and Material Use of All Biodegradable Waste Cat. Number 200201 "House From House" According to Annex No. 1 of the Contract on the Territory of the City of Chýně. C) Regular collection and material utilization of all plastic Cat. Number 200139 Mixed With Composite And Beverage Cartons Cat. Number 20010101 "House From House" According to Annex No. 1 of the Agreement on the Territory of the City of Chýně. D) Regular collection and material use of paper and cardboard Cat. Number 200101 "House From House" According to Annex No. 1 of the Contract on the Territory of the City of Chýně. E) Regular collection and material utilization of all glass Cat. Number 200102 From All Collection Nests According to Annex No. 1 and 2 of the Contract (containers Owned by the City). F) On Order Collection and Energy Utilization/removal of Bulky Waste Cat. Number 200307 From the Bulk Container According to Attachment No. 1 From the Collection Point (the container is owned by the Supplier). G) Regular collection and material utilization of all textile material Cat. Number 200111 Together With Clothing Cat. Number 200110 From the Collection Point According to Annexes No. 1 and 2 of the Contract (containers Owned by the City). H) Processing of Statements for the Authorized Packaging Company Eko-kom, As The statement will be submitted to the Customer by the 10th calendar day of the following month after the end of the calendar quarter. I) Keeping Continuous Records of Received Waste, Pursuant to Decree No. 383/2001 Coll., On Details of Waste Management, as Amended by Later Regulations. This record will be handed over to the customer by the 20th day of the following calendar month for the previous month in Xlsx format and by January 20th of the calendar year for the previous year in the data standard of the Integrated System for the Fulfillment of Reporting Obligations (ispop). This Record Will Be Submitted To The Customer For Approval And Sent As A Report On Waste Production And Waste Management In The Current Ispop Data Standard. J) Loading, Exporting and Transmitting Monthly Statements for All Collection Containers According to the Customer's Instructions. Scanning Collection Containers Using an Rfid Chip Reader. Online Connection of Readers for Payment Records. K) Outputs from the Service Provider's Sw Records in *.xlsx format according to the attached sample (Annex No. 4 of the Contract), delivered and uploaded to the City's website within 24 hours of the collection being carried out, or alternatively the possibility of providing open data online during the collection, which will be Possible to Immediately Transfer to Citizens. More details on the subject of performance are given in the appendices: Appendix No. 1 – Draft Contract and Appendix No. 5 – List and Price List of Tender Documentation Services.

Details: 1) High Performance Liquid Chromatography System Equipped With Binary Mixing Pumping System With Operating Back Pressure Up To 700 Bar, “gradient Delay Volume” Option For Optimizing The Dead Volume Of The Pumping System Itself (tuning From 25µl To 230µl Via Software, Without Mechanical Operator Intervention) And Pump Flow Accuracy Of At Least [input] 0.1%. Equipped With Thermostatted Autosampler (4-40° C), Able To House At Least 200 Vials Of 2 Ml And Column Thermostat Module With Oven Heating Capacity In Both Forced Ventilation And Peltier Mode (selectable Via Software) And Able To Host At Least 2 Columns Of 30 Cm For The Accurate Separation Of Multiple Compounds Present In The Agro-food Matrices. 2) High Resolution Benchtop Mass Spectrometer Based On Quadrupole/detector Technology That Works In Fourier Transform Made Up Of A Precursor Selection Quadrupole, An Orbitrap Type Analyzer/detector And A Collision Cell (ion Routing Multipole) Where It Happens Fragmentation Ms/ms. 3) Resolution Values Up To 240,000 Fwhm, Measured At M/z 200; This Resolution Value Cannot Be Reached By Other Instruments That Do Not Involve The Use Of Magnetic Fields (generated By Superconducting Magnets With The Consequent Use Of Expensive And Demanding Cryogenic Systems) To Identify And Quantify The Molecules With Maximum Confidence. 4) Ability To Work In Polarity Switching: The Instrument Must Operate With Polarity Change Cycles (alternate Complete Scans In Positive Ion And Negative Ion Mode) In A Time Of 0.7 Seconds At Fixed Resolution (60,000 Fwhm). No Technology Other Than Orbitrap Allows Polarity Switching At Such Times, Fixed Resolution, And Without Compromising Sensitivity. 5) A Mass Accuracy Below 1 Ppm, A High Scanning Speed (up To 22 Hz), To Have A Versatile And Exclusive Platform For The Needs Of The Metrofood-it Laboratory Engaged In The Structural Characterization Of Individual Proteins, As Well As In The Analysis Of Post-translational Modifications And Glycoproteins, In The Detection Of Adducts, In The Qualitative And Quantitative Characterization Of Complex Protein Mixtures, In The Profiling Of Foods And At The Same Time Meeting The Needs Of Study And Research In The Field Of "small Molecules", Such As The Challenge Of Identifying An Unknown Substance In A Matrix: Whether It Is Exogenous, Endogenous, Parent Substance Or Metabolite 6) Spectra Acquisition Mode Sim (single Ion Monitoring) And Ms/ms In "multiplexing" Mode, Such That More Ions Precursors (at Least 20) Can Be Collected And Preselected For Detection In High Resolution, Reducing Analytical Cycle Time And Increasing Number Number Of Measurements Within The Chromatographic Peak. 7) Analysis Of Large Molecules Including Intact Proteins And Large Complexes Denatured Or In Native Conditions. Must Include The Ability To Pass (intact) And Analyze Masses Up To M/z 8,000. 8) A Fully Integrated Suite Of Advanced Software Tools For Processing And Interpreting Known And Unknown Data (targeted And Untargeted Approach). Software Must Simplify Compound Identification, Benchmarking, And Provide Extensive Data Filtering And Visualization Capabilities In Workflows. It Must Also Include The Analysis And Characterization Of Native Proteins And Peptide Mapping.

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 19 Of 19 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 19 1. This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Items, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. 2. This Is A Request For Quote (rfq) And The Solicitation Number Is 36c26024q0552. The Government Anticipates Awarding A Firm-fixed Price Fss Delivery Order Contract Resulting From This Solicitation. 3. This Is A Solicitation For The Lease Of Brand Name Or Equal Two (2) Rapidpointâ® 500e Blood Gas Systems And Associated Reagents (period Of Performance Base+4 Option Years: 5/22/2024 4/30/2029). the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-05 Effective April 22, 2024. 4. This Solicitation Is A Service-disabled Veteran-owned Small Business Set-aside. The Associated North American Industrial Classification System (naics) Code For This Procurement Is 334516, With A Small Business Size Standard Of 1,000 Employees And The Psc Is W065. the Sba Non-manufacturer Rule Is Not Applicable As A Class Waiver Exists Under Naics Code 334516 -analytical Laboratory Instrument Manufacturing Under Which This Requirement Will Be Procured. all Interested Companies Shall Provide Quotations, Including Pricing, As A Part Of This Solicitation. All Information Of This Nature Submitted To The Government Shall Be Made In Accordance With The Brand Name Or Equal Salient Characteristics And Statement Of Work Below. Responsive Quotes Shall Include A Price Quote, Past Relevant Performance, And Item/task Technical Specifications Outlining How They Intend To Meet The Standards Provided In Both Section (6) Salient Characteristics And Section (7) Statement Of Work . 5. Price/cost Schedule: the Department Of Veterans Affairs, Puget Sound Va Heath Care System (vahcs), Nco20 Is Looking For A Lease Of Brand Name Or Equal Sources Of The Following: base Year + 4 Option Years (the Below Is A Template To Be Used Per Year) base Year: 5/22/2024 4/30/2025 o Option 1: 5/1/2025 4/30/2026 o Option 2: 5/1/2026 4/30/2027 o Option 3: 5/1/2027 4/30/2028 o Option 4: 5/1/2028 4/30/2029 item (per Year) quantity dollar Amount (per Item) total rp500e Blood Gas Analyzer 2 ups Standard 120v 2 warranty Service Rapidpoint 500e Plus 2 Years 2 extended Service Rapidpoint 500e Plus 3 Years 2 mcart Lac 250 Test 1 mcart Lac 400 Test 1 mcart Lac 750 Test 24 grand Total 6. Salient Characteristics: the Chemistry Department Of Puget Sound Health Care Systems Requires A Minimum Of Two (2) New Blood Gas Analyzers At This Time For Lease That Provide The Following Attributes: the Blood Gas Platform Selected Is A Comprehensive, Whole Blood Critical Care Analyzer That Combines Blood Gases, Electrolytes, Metabolites, Co-oximetry, And Calculated Results In A Simple, Compact Device. the Platform Combines Maintenance-free, Replaceable Cartridge Technology For Sensors And Reagents the Analyzer Uses Non-lysing Whole Blood Co-oximetry Technology. the Analyzer Must Produce Very Rapid And Complete Testing Within One Minute. the Analyzer Will Provide Bidirectional Connectivity And An Onboard Data Management System. the Platform Menu Must Include, But Not Limited To, The Following: ph pco2 tco2 po2 hct na+ k+ cl- ca++ mg++ glucose lactate hhb o2hb methb cohb so2 o2 tbil hbf thb barp the Platform Will Have A Mechanism To Prevent Clots From Entering The Sample Path. the Platform Will Use Liquid Qc To Meet Clia Guidelines Samples Can Be Aspirated Directly From The Syringe Proficiency Samples Will Not Require Adaptors Foot Print Of Analyzer Will Not Exceed 14.2 Inches Wide, 15.5 Inches Deep, And 18.2 Inches Tall To Meet Laboratory Countertop Restrictions. The Platform Will Have An Onboard Thermal Printer And A Back Up Battery Source. The Platform Will Have The Capacity To Provide The Following Reports: - Calibration Report - Cartridge Log Report - Daily Sample Log Report - Edit Log Report - Error Log Report - Maintenance Log Report - Operator Setup Report - Patient Report - Levey-jennings Qc Report - Qc Corrective Actions Report - Qc Data Report - Qc Statistics Report - Qc Setup Report - Sample Audit Log Report 7. Statement Of Work scope Of Work va Puget Sound Health Care System Is In Need Of Leasing A Minimum Of Two (2) Whole Blood/arterial Blood Gas/critical Care Metabolites Analytical Instrument Systems At This Time To Conduct A Variety Of Tests On Our Patient Population. These Analyzers And Supplies Must Be Provided To Both Seattle And/or American Lake And/or Any Vapshcs Campuses Per The Estimate Given In The Statement Of Work. There May Be The Need For An Additional Rental Unit To Be Added At A Later Date, Per The Needs Of The Puget Sound Vahcs. the Purpose Of This Statement Of Work (sow) Is For The Government To Obtain The Greatest Overall Benefit In Response To The Requirements. i 1.0 Requirements/services To Be Provided: general Requirement the Vendor Shall Furnish All Clinical Laboratory Supplies And Services As Described Herein To The Participating Vamc Facility In Accordance With The Applicable Federal Supply Schedule Contract. Attachment 1 (test Volumes) Can Be Utilized By Interested Contractors To Submit Their Cost Proposal. a Listing Of The Estimated Yearly Quantity Is Provided Under This Agreement Located In Attachment 1 (test Volume). Quantities Listed In The Attachment To This Rfq Are Estimates Based Upon Prior History Of Actual Volumes And Are Intended To Provide The Potential Contractor A Basis For Calculating Their Pricing. They Are Not A Guaranteed Minimum. the Pricing Shall Be Based On New Equipment. Remanufactured Or Used Models Will Not Be Accepted. The Vendors Offered Blood Gas Analyzer/system(s) Must Conform To The Facility S Existing Space. The Dimensions Of This Space Are 7 X 2.5 In Seattle And 16 X 24 In American Lake. the Analyzer/equipment Must Meet The Test Volume In Attachment 1 And Match Or Improve The Turnaround Time Requirements. The System Should Streamline All Aspects Of Testing, Thereby Improving Efficiency And Productivity Of The Using Facility. the Vendor Shall Provide The Facility With Food And Drug Administration (fda) Approved Analyzer/equipment, Reagents, Controls, Calibrators, Linearity Material, Disposables, Any Consumable Part Necessary For Analyzing/testing On The Analyzer. Vendor Shall List The Consumable Parts Provided. Vendor Shall State Any Parameter/function That Is Pending Fda Approval At The Time Of The Submission. b. System Requirements: the Desired Blood Gas/critical Care Metabolite Instrumentation Must Have The Capability Of Performing And/or Reporting The Following Parameters On Arterial, Venous, Or Mixed Venous Whole Blood Specimens: ph po2 pco2 hemoglobin hematocrit sodium potassium chloride ionized Calcium glucose lactic Acid base Excess bicarbonate total Carbon Dioxide (tco2) oxygen Saturation co-oximetry (or Similar Technology To Fractionate Hemoglobin Species) in Addition, The Analyses Must Take Place On A Single Instrument And A Single Specimen. The Instrument Shall Be Able To Perform The Complete Profile Described Above Discretely By Either Direct Or Indirect (calculated) Measurement And Meet The Performance Characteristics For Accuracy And Precision As Defined By The 1988 Clinical Laboratory Improvement Act (clia) And The National Committee For Clinical Laboratory Standards (nccls). the System Must Have Standardization Of Software, Hardware, Reagents, And Consumables Between The Primary And Back-up Analyzers Throughout The Facility (mirror Image Redundancy). the Vendor Shall Provide The Facility, For The Duration Of The Contract, With All Reagents, Controls (both Blood Gas, Chemistry, And Co-oximetry), Calibrators, Disposables, Any Consumable Part (inclusive Of Replacement Parts Per Manufacturers Maintenance Guidelines, Aspiration Devices, Etc.), Necessary For Analyzing/testing On Both The Primary And Back-up Analyzers To Produce A Patient Result. All Linearity Material And Any Commercial System Correlation Samples Needed May Be Provided To Meet Cap Requirements. vendor Must Provide A Printer And All Thermal Paper For Generating Paper Copy Of Results, And Provide A Replacement Printer As Needed. vendor Shall Specify Calibration Frequency Of One Point, Two Point, And System Calibrations In Accordance With Regulatory Requirements. The System Must Alert The Operator Of A Calibration Drift. vendor Must Provide On-board Commercial Quality Control For Every Twenty-four Hours Of Operation To Include: Three Levels For Blood Gases, At Least Two Levels For Chemistry, And Three Levels For Co-oximetry To Be Analyzed On Each Analyzer At The Facility. the System Must Have A Sampling System That Can Aspirate Directly From A Syringe Or An Evacuated Blood Collection Tube And Can Accommodate Any Sample Type Without Any Additional Adapter Devices. The Sampling System Must Have The Capability Of Walk Away Processing That Negates The Need For Additional Instrument Prompting. The Vendor Must Also State The Sample Size Required For Patient Testing. the Sampling System Must Immediately Alert The Operator That A Sample Is Not Positioned Properly, There Is Insufficient Sample Quantity, And Have Early Clot Detection That Alerts The Operator To The Suspected Existence Of A Fibrin Clot In The Specimen. The Vendor Must Define The Methodology For Clot Detection. the System Must Have Ready To Use Reagents That Have On Board Stability Greater Than Or Equal To 30 Days. Vendor Shall List All Reagents Needed For Blood Gas/chemistry/co-oximetry Analysis, The Format/size Of The Reagents, And If The Supplies Are Stored At Room Temperature Or Refrigerated. Vendor May State If Reagents And Controls Are Color-coded. Packaging Should Be Maximized To Accommodate The Specimen Volume At The Facility And Not Require A Frequent Exchange Of Inventory On The Equipment. the System May Provide Reagent Inventory, In Real Time That Can Be Printed At Selected Time Intervals For Reagent Documentation. the System Must Be Programmed To Perform And Execute Auto Quality Control Without Operator Intervention. Perform Automatic Corrective Action On The System If The Results Of The Quality Control Testing Are Not Acceptable And Have The Ability To Lock Out/suppress A Test If There Are Qc Failures. the Vendor Is To Define The Actual Hands-on Maintenance Time Required For Daily, Weekly, Monthly, And As Needed Maintenance. The Vendor Is To Include The Analyzer Time Required To Perform Each Maintenance Task. Vendor Must List Which Tasks Are User Level And Which Tasks Are Service Level. Systems That Use Electrodes Must Have Minimal Maintenance, Electrode Replacement Must Be Accomplished Easily, And The New Electrode Must Be Operational Within Two Hours Of Replacement. The Analyzer May Have On-board Integrated Maintenance And Trouble-shooting Procedures. the Vendor Must Provide A Comprehensive Qc Program, Provide Qc For All Tests Listed In Attachment 1 And Must Provide The Following Options: qc Files May Be Edited Or Corrected For Errors Manually With/without Password protection have On-board Quality Control Data Storage (for At Least 90 Days) And Reporting capabilities ability To View/print Daily, Monthly Qc Results And Levy-jennings Graphs. ability To Visually Alert The Operator Of Qc (westgard/user Defined Rules) Failures. electronic Transfer Of Qc Data To Vendor Without The Need For Manual Entry automatic Enrollment In A Quality Assurance Program That Has Peer Participation Of At Least 50 Participants That Are Not Part Of Visn 20 Network. Reports Of Peer Data Will Be Current And Available Within 2-4 Weeks Of The Data Submission For Hard Copy Review. the Vendor Must Supply Equipment That Performs Satisfactorily At Any Laboratory Relative Humidity Between 15 To 85 Percent And Any Laboratory Temperature Between 50 To 100 Degrees Fahrenheit. instrumentation And Software: the Vendor Is To Complete With Their Proposal The Medical Equipment Pre-procurement Assessment (va Directive 6550 Appendix A) For The Office Of Information Technology (oi & T) For The Facility For Any Medical Devices That Will Be Connected To The Va Information Network. The Vendor Will Provide Evidence Of Va Approved Remote Network Communication System That Continuously Collects And Monitors Performance Data Of The Analytical Systems Following All The Policies And Procedures Outlined In The Va Directive 6500, Information Security Program, And Its Handbooks To Ensure Appropriate Security Controls Are In Place (see Appendix A In Section D). the System May Have The Ability To Manage Patient Information Through A Data Manager. Including The Acceptance Of Test Ordering Information, Transmittal Of Patient Laboratory Patient Results, Storage And Retrieval Of Patient Laboratory Results. Retrieval Of Patient Or Instrument Data Must Be In A Microsoft Windows Compatible Format. the Equipment Shall Include 120-volt Ups That Has A 2 3-hour Back-up Capability For All Analyzers. The Vendor Will Be Responsible For Replacing The Ups Should It Become Dysfunctional And Provide Battery Replacement As Needed. the System Will Support Multiple Barcode Formats Including But Not Limited To Code 39, Code 128 And Coda Bar That May Be Enabled Concurrently. the System Must Accept At A Minimum, A 10-character Specimen Identifier That Is Alphanumeric (letters And Numbers). the Vendor Must Provide The Following Interfacing Requirements: instrument Lis Physical Connection And Translation (drivers) routing Must Be Fully Supported By All Laboratory Instrument Interface Partners, Especially Data Innovations, Inc. any Additional Hardware And Software Needed To Interface The Analyzer And Technical Assistance With Interfacing The Analyzer. any Required (additional) Interface Connection License(s) instrument-lis Interface Must Be Bi-directional. provide Documentation Of Successful Interfacing With Other Va Facilities (provide Two Vamc References) interface Must Use Automatic Host Query To Download Sample Ids, Test Requests, And Patient Demographics. automatic Host Query Must Seamlessly Integrate With Onboard Patient Sample Barcode Scanning And Translation. instrument Interface Must Transmit Test Results To The Host Computer System Via Automatic Upload. the System Shall Have Computer Capabilities That Are Compatible With Customer Lis Software, Provide Cd-rom/dvd Player, Minimum 17-inch Flat Screen Panel Lcd Display Monitor With Built-in Speakers, Optical Mouse, And Laser Jet Printer. the Blood Gas Instrumentation Must Have A Printer That Has The Capability Of Printing A Patient Report With Patient Demographic Information That Includes Minimally The Patient S Name, Social Security Number, Order Number, And Phlebotomy Site. Vendor May List Programmable Options For Patient Demographic Report. the System Shall Have An Automatic Back-up Function To Store All Data From The Hard Drive. Vendor Must Describe The Back-up Option In Submitted Proposal. Would Prefer If Data Back-up Was Exportable By Usb Flash Or Cd-dvd Drive And In A Microsoft Windows Compatible Format. the System Must Be Able To Store And Retransmit Records (24 Hours Of Maximum Instrument Throughput) In Case Of Interface Downtime. The System May Have The Ability To Edit Sample/patient Identifier After Interface Downtime And Then Be Able To Resend The Sample/patient Information To The Host For Verification. the Vendor Must Provide All Upgrades To The Equipment Hardware, Software, And Operating Systems Without Additional Charge To The Government (e.g., Upgrades That Correct Either A Mechanical Or Software Deficiency Of The System). These Enhancements To The Vendor S Equipment Shall Be Delivered And Installed At The Site Within Two Months Of Their Issuance Or Date Of First Commercial Availability. The Vendor Will Always Maintain Compatibility Of Systems With Whatever Host Lis Is In Place, Especially When Vendor Software Is Upgraded. the Vendor Must Remove All Equipment Within 90 Days Of The Expiration Of The Terms Of This Bpa But Not Until The Completion Of The New Vendor S Equipment Installation Inclusive Of Completed Cross Over Studies. The Facility, Per Their Protocol, Will Be Responsible For The Removal/erasing Of The Hard Drive At Analyzer Removal/upgrade. installation: the Vendor Shall List Analyzer/utility Requirements (electrical, Water, Plumbing, Reagent And Bio-hazardous Disposal, Temperature, Humidity, Etc.). The Vendor Shall Provide Weight And Dimensions Of Proposed Analyzers. the Vendor Must Indicate Any Routine And /or Special Items Required To Operate/maintain The Equipment/analyzer In Optimal Condition Such As But Not Limited To: Paper, Printer Cartridges, Drainage Systems, Surge Suppressors, Etc. Any Items Excluded By The Vendor Shall Be Delineated In Their Proposal. The Cost Of The Excluded Items Must Be Incorporated In The Price Proposal. the Vendor Shall Provide The Facility With All Reagents, Calibrators, Control, And Any Cross-over Supplies Needed At Installation And During Training Of Staff. The Vendor Must Pay All Shipping Costs For The Analyzers And All Supplies Needed For The Installation, Correlation Studies And Training Of Staff. Test Counts For Billing Will Begin After All Cap Required Studies, Performed At Installation Of New Equipment, Are Reviewed And Approved. at Installation/set-up The Vendor/technical Support Specialist Shall Perform All Validation Studies Including Installation/set-up, Correlation Studies (evaluation/comparison Data Sufficient To Satisfy Cap Standards), Reference Range Studies, Staff Training, In-services To Laboratory Personnel And Clinicians, And Assist With Any Methodology Problems And Questions. The Service Must Be Available During Regular Office Hours On A 5 Days/week Basis. the Vendor Must Provide Equipment Installation And Possible Reinstallation Costs If The Equipment Is Required To Be Moved Due To Construction Or Laboratory Redesign. the Vendor Will Work With The Facility To Adjust Reagent Supply To Match Workload Changes And To Provide The Option Annually For The Facility To Adjust The Shipment Table. The Vendor Shall State What Their Policy Is In Regard To Adjusting A Standing Order Or Ordering An Additional Shipment Of Supplies. training/procedures: the Vendor Shall Provide All Necessary Procedure Manuals, Troubleshooting Manuals, Operator Manuals, Technical Manuals For Computer Interfacing, Msdss, Etc. (also Available On Computer Disc). Procedures Must Be In The Clinical And Laboratory Standards Institute (clsi) Format. the Vendor Must Provide Primary User Training For A Minimum Of Two Users Per Instrument With On-site Training Available To The Remaining Users On All Tours (or Shifts) With Competency Assessment Performed And Documented. Primary User Training Is To Include All Costs Of Off-site Training, I.e., Transportation (air And Ground), Room And Board, Etc. support Services: the Vendor Must Provide A Preventative Maintenance Schedule To Include A Minimum Of Two Scheduled Preventative Visits Per Year For The Duration Of The Contract. the Vendor Shall Replace Any Analyzer/equipment That Is Provided During The Terms Of This Bpa That Has Not Been Repaired To The Workable Satisfaction Of The Facility. Should The Repair Record Of Any Individual Analyzer/equipment Reflect A Downtime Of 5% Or Greater Of The Normal Working Days In One Calendar Month, A Determination Will Be Made By The Designated Representative Of The Using Facility/clinic To Replace The Initial Laboratory Analyzer/equipment With New Analyzer/equipment. Each Analyzer/equipment Provided By The Vendor Shall Maintain An Uptime Of 95% In Each Month During The Terms Of The Agreement. the Vendor Shall Provide Instrument Support Service Sufficient To Aid With Troubleshooting And Repair Of The Analyzers. The Vendor May List Their Service Options Available. Or The Following Service Options May Be Available: 24 Hours/day, 7 Days/week Or From 08:00 17:00, 7 Days/week. For Any Site That May Encounter The Rare Occasion When Both Analyzers Are Inoperable (service Has Now Escalated To Emergency Status), Service Shall Immediately Dispatch A Field Service Engineer For Repair. Vendor Is To Explain Their Policy In Relation To Service If The Occasion Should Occur When All Analyzers Are Inoperable. The Support Service Must Follow-up All Down Calls Within 1 Hour. The Fsr Will Always Keep The Facility Informed Of The Timeline For When Repairs Are To Be Completed. All Repairs On Instrument Must Be Completed (at No Cost To The Facility/clinic) Within 24 Hours From The Time The Field Service Engineer Arrives. the Vendor Will Provide Twenty-four Hour/seven-day Service Hotline With Technical Support. All Calls Will Be Answered Within One Hour Via Telephone. service Is To Include All Travel, Parts For Repair Or Replacement, And Labor. the Vendor Will Pay All Routine Shipping Fees For Supplies, Consumables, And Equipment To Perform Testing At Initial Installation And With Routine Supply Delivery. if All Instruments Are Inoperable: The Vendor Shall Pay For The Laboratory Testing At A Reference Facility If The Equipment Requiring Repair Is Inoperative Due To Malfunction Through No Fault Or Negligence Of The Facility For A Total Of More Than 24 Hours. The Cost Incurred From The Reference Facility Testing, Packaging And Shipping Will Be Applied To The Invoice In The Form Of A Credit Or Deduction. Downtime For Each Incident Will Start From The Time The Facility Makes A Bona Fide Attempt To Contact The Vendor S Designated Representative Until The Analyzer Is Returned To Good Operating Order. if The Consumables Are Found To Be Defective And Unsuitable For Use With The Vendor S Equipment, Or The Vendor Has Failed To Comply With The Requirements For Routine Supply Delivery, The Vendor Shall Deliver The Consumable Supplies Within A Period Of 24 Hours After Receipt Of The Verbal Order For Priority Delivery From The Facility/clinic. If Either Circumstance Has Occurred, The Vendor Will Deliver To The Facility, In The Most Expeditious Manner Possible, Without Additional Costs To The Facility, The Necessary Consumable In Sufficient Quantity Until The Arrival Of The Standing Order/routine Supplies Delivery. the Vendor Must Provide Replacement Parts And Any Components Necessary For The Operation Of The Instrument(s) To Produce Patient Results. past Performance/technical Excellence: Availability Of Four (4) References (two Va And Two From The Private Sector) Which Can Validate Past Experience Within The Last Three (3) Years Regarding: a. Quality Of Service (to Include Timeliness Of Service, Documentation And Communication Of Work/repair At Time Of Service, Does Service Repair/fix The Problem On The First Site Visit Or Does Service Have To Return To Repair/fix The Problem Again, Are Parts/tools Available When Service Is Performed Or Is Service Delayed Due To Ordering Replacement Parts), And Technical Support Including Method Validation. ability Of Vendor To Supply Accurate Data For Annual Contract Renewal By Required Time Frames And Timeliness Of Billing Reconciliation. customer Satisfaction: Meets Or Exceeds Turn-around With Negligible Downtime. the Vendor Will Include Within Its Proposal The National Average Of Service Calls Per Analyzer Per Year. the Vendor Shall List Reagent Recalls/bulletins Within The Last Five Years. The Vendor Shall List Any Product Unavailability Due To Manufacturing Issues Within The Last Five Years. the Proposed Equipment Should Have At Least One-year Proven Experience And Be Available On The Federal Supply Schedule. ii 2.0 Value Added Characteristics: the Vendor Will Provide Replacement Parts And Any Components Necessary For The Operation Of The Instrument(s) To Produce Patient Results. the System May Have The Ability For The Electronic Transfer Of The Manufacturer S Qc Ranges To The Instrument Without The Need For Manual Entry. the System May Have The Ability To Have On-board Documentation For Out-of-range Quality Control And Instrumentation Problems. the Analyzer May Have Onboard Maintenance Records That Can Be Modified For Additional User Defined Maintenance Records And Printed At Selected Time Intervals For Maintenance Documentation. the System May Have A Touch-screen Interface In Addition To The Keyboard And Mouse. the Vendor May Provide On-site Refresher Training In Renewal Option Years Of The Contract If So Exercised. User Also Has The Option Of Sending One Additional Staff Member Per Analyzer For Primary Off-site Training In Renewal Option Years. Renewal Option Year Training Is To Include All Costs Of Off-site Training, I.e., Transportation (air And Ground), Room And Board, Etc. the System May List Additional Parameters Such As Lactic Acid, Creatinine, Blood Urea Nitrogen, Etc. That Can Be Analyzed On A Patient Sample. the System May Have Fda Approval For Ph Of Other Body Fluids. the System May Have The Ability To Have On-board Parallel Qc Lot Capability, Allowing For Old And New Lot Qc To Be Run Consecutively For Validation For Effective Time Management And Cap Compliance. iii 3.0 Other Terms And Conditions: unless Otherwise Agreed Upon By Both Parties, Terms And Conditions Of This Bpa Will Be Determined By The Vendor S Current Federal Supply Schedule Contract With The General Services Administration Or Va National Contract Center. all Pricing Will Be Based On And Shall Not Exceed The Vendor S Most Current Fss Contract Pricing For Supplies Offered. this Shall Be Based On Period Of Performance: 22 May 2024 To 30 April 2025 Base Year 1 May 2025 To 30 April 2026 Option Year 1 1 May 2026 To 30 April 2027 Option Year 2 1 May 2027 To 30 April 2028 Option Year 3 1 May 2028 To 30 April 2029 Option Year 4 attachment 1 annual Volume: test volume abg 6800 glucose 6800 ionized Calcium 12,176 co-oximitry 280 lactic Acid 4600 note: Va Puget Sound Health Care System Workload Increases 2.5% Each Year, On Average. 8. The Full Text Of Far And Vaar Provisions Or Clauses May Be Accessed Electronically At: http://acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp the Following Solicitation Provisions Apply To This Acquisition: 10. Far 52.212-1, Instructions To Offerors Commercial Items , Applies To This Acquisition And The Following Clauses And Instructions Are Added As Addenda: addendum To Far 52.212-1 Instructions To Offerors Commercial 52.252-1 solicitation Provisions Incorporated By Reference (feb 1998) 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (aug 2020) 52.211-6 brand Name Or Equal (aug 1999) 52.214-21 descriptive Literature (apr 2002) (a) Gray Market Items Are Original Equipment Manufacturers (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e. Replacement Parts) For Va Medical Centers. No Remanufactures Or Gray Market Items Will Be Acceptable. (b) Offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e. Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. (c) The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. (d) Any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. (e) Offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contactors, The Offeror Making Such Contact May Be Excluded From Award Considerations. (f) All Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. (g) All Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. (end Of Addendum To 52.212-1) 11. Far 52.212-2, Evaluation-commercial Items , Applies To This Acquisition. The Government Intends To Make A Best Value Determination Based On, But Not Limited To, The Following Evaluation Factors When Evaluating Offers: (a) Technical Compliance: quoted Commodities And Services/supplies Shall Be In Accordance With The Salient Characteristics And The Statement Of Work Above. (b) Price: price - The Offeror Shall Complete The Price/cost Schedule Provided In Section (5) Above. (c) Past Performance: past Performance The Offeror Shall Attach Contract Numbers Of Previous Similar Past Performance Along With A Very Brief Description Of Services. (d) Proof Of Meeting The Special Tasks And Salient Characteristics Per The Sow: the Offeror Shall Provide Either A Statement Or A Brief Synopsis Of The Process Outlining How They Intend To Meet The Standards Provided In Both Section (7) Statement Of Work And In Section (6) Salient Characteristics Order To Be Considered For Award. 12. Offerors Are Advised To Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Its Offer If Has Not Been Completed On Sam.gov. offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: 13. Far 52.212-4, Contract Terms And Conditions Commercial Items (oct 2018) addendum To Far 52.212-4 The Following Clauses Are Included As A Part Of The Addendum: 52.204-13 system For Award Management Maintenance (oct 2018) 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) 52.217-8 option To Extend Services (nov 1999) 52.217-9 option To Extend The Term Of The Contract (mar 2000) 52.232-40 providing Accelerated Payments To Small Business Subcontractors (dec 2013) 852.212-70, Provisions And Clauses Applicable To Va Acquisition Of Commercial Items (apr 2020). The Following Clauses Are Incorporated By This Clause: 852.203-70 commercial Advertising 852.211-70 equipment Operation And Maintenance Manuals 852.212-71 gray Market Items (apr 2020) 852.215-70 service-disabled Veteran-owned And Veteran-owned Small Business Evaluation Factors 852.219-10 va Notice Of Total Service-disabled Veteran-owned Small Business Set-aside. (nov 2020) 852.219-74 limitations On Subcontracting Monitoring And Compliance (jul 2018) 852.232-72 electronic Submission Of Payment Requests. 852.242-71 administrative Contracting Officer (oct 2020) 852.264-71 rejected Goods the Following Subparagraphs Of Far 52.212-5 Are Applicable: far 52.212-5 Applies To This Acquisition With The Following Far Clauses Incorporated By Reference; 52.203-6 restrictions On Subcontractor Sales To The Government (jun 2020) 52.204-10 reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (jun 2020) 52.219-8 utilization Of Small Business Concerns (oct 2018) 52.219-14 limitations On Subcontracting (jun 2020) 52.219-28 post Award Small Business Program Representation (may 2020) (15 U.s.c 632(a)(2)) 52.222-3 convict Labor (jun 2003) (e.o. 11755) 52.222-19 child Labor Cooperation With Authorities And Remedies (jan 2020) (e.o. 13126) In Both 52.222-21 prohibition Of Segregated Facilities (apr 2015) 52.222-26 equal Opportunity (sep 2016) (e.o. 11246) 52.222-35 equal Opportunity For Veterans (jun 2020) 52.222-36 equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793) 52.222-37 employment Reports On Veterans (jun 2020) 52.222-40 notification Of Employee Rights Under The National Labor Relations Act (dec 2010) 52.222-50 combating Trafficking In Persons (jan 2019) (22 U.s.c. Chapter 78 And E.o. 13627) 52.222-54 employment Eligibility Verification (oct 2015) 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513) 52.225-5 trade Agreements (oct 2019) 52.225-13 restrictions On Certain Foreign Purchases (jun 2008) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury) 52.232-33 payment By Electronic Funds Transfer System For Award Management (jul 2018) (31 U.s.c. 3332) 15. There Are No Additional Contract Requirements, Terms Or Conditions. 16. The Defense Priorities And Allocations System (dpas) Ratings Are Not Applicable. 17. Quotes Must Be Emailed To Dane.gift@va.gov And Received No Later Than 17:00 Pm Pst On 5/21/2024. Quotes May Be Submitted On The Vendor S Own Form Following The Format Found In Section 11 Evaluation-commercial Items . no Late Quotations Will Be Accepted. The Government Intends To Make Award Without Discussions. 18. For Information Regarding The Solicitation, Please Contact Dane Gift At Dane.gift@va.gov. department Of Veterans Affairs

Details: 03/01/2024 please See The Attached Amendment_2 For Solicitation Ppq1118207 the Program Is Requesting A Windows 10 Product That Will Have The Capability To Upgrade To Windows 11 For This Requirement. 02/27/2024 please See Attached Amendment_1 To Sam.gov Rfq# Ppq1118207. sam.gov Sole Special Notice# Pr1118207 Published 2/20/2024 Is Hereby Cancelled. Alternate Products Are Acceptable. usda Aphis Ppq Science And Technology In Edinburg, Tx Would Like To Know What The Cost Would Be For A Service Visit For Annual Calibration. Please Include Any Information/details Regarding Calibration Services (please Complete Page 2 ) interested Parties Please Complete Boxes 8, 15a,b & C And Page 2 Of Amendment_1 Sf30 Form And Return By Solicitation Due Date. lack Of Submission Of Any Or All Documentation Requested May Result In No Further Consideration Of Quote Package. (i) This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. (ii) This Solicitation Number Ppq1118207 Is Being Issued As A, Request For Quotation (rfq) (iii) In Accordance With Federal Acquisition Regulation (far) Clause 52.252-2 Feb 1998)the Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular. Applicable Far Clauses Are Incorporated By Reference And May Be Viewed On The Following Website (s) https://www.acquisition.gov/ https://www.acquisition.gov/agar (iv) This Requirement Is Being Issued As A Small Business Set Set-aside In Accordance With Federal Acquisition Regulation (far) 52.219-6. In Accordance With Agricultural Acquisition Regulation ( Agar )452.219-70 Size Standard And Naics Code Information : the North American Industrial Classification System Code(s) And Business Size Standard(s) Describing The Products And/or Services To Be Acquired Under This Solicitation Is Listed Below: naics 334516 Analytical Laboratory Instrument Manufacturing size Standard 1,000 Employees (v) Item Description 1ea Oxford Aztec Eds For The Hitachi Tabletop Sem With Truemap And Accessories Brand Name Or Equal Iaw Far 52.211-6 Brand Name Or Equal. (aug 1999)information Regarding This Product May Be Found At Https://nano.oxinst.com/products/eds/ travel Cost Is Included Within The Service Plan Fee. the Contractor Must Inform The Point Of Contact At Usda/aphis/ppq S & T, On Potential Dates For Installation Or Maintenance. The Poc Will Negotiate The Final Date And Time Of The Visit. The Poc Will Then Inform The Facility Manager At Moore Air Base Located At 22675 N. Moorefield Road, 78539 Edinburg, Texas Of The Upcoming Scheduled Visit. The Facility Manager Will Inform The Security Guards At The Entrance Of The Base Of The Upcoming Visitor And Date Or Dates Of The Visit. The Contractor (visitor) Will Be Advised Prior To The Visit To Bring A Photo Id For Entrance Onto The Facility. At That Time, The Poc Will Be Reached And Will Meet With The Contractor At The Entrance To Building 6414. The Poc Will Escort The Contractor To The Microscopy Lab Located Inside Bldg. 6414, And This Is The Location Of The Hitachi Tabletop Scanning Electron Microscope. (vi) Specifications And Description Of Requirement: pc-sem windows 10 Pc For Tm3030plus 55e-0890 win10 Upgrade For Tm3030plus xplore30tm oxford Aztec Eds For The Hitachi Tabletop Semwith Truemapthe Xplore Compact With Truemap, Ideal For Complicated Spectra With Crowded Overlapping Peaks. The Aztecone System For Tm4000 Series Is The Only System That Is Specifically Designed To Meet The Needs Of The Ttm User. A Simple To Use Interface Combined With The Proven Technology And Reliability Of Oxford Instruments Software Algorithms And Hardware, Mean That Novice And Infrequent Users Can Not Only Get Their Results Quickly And Easily, But They Can Have Confidence That They Are Accurate And Dependable.included Functionality: • Image Acquisition –capability To Acquire Se And Bse Images Sequentially Into The Same ‘site Of Interest’ • Spectrum Acquisition – Collect Data From Point, Rectangular, Elliptical And Irregular Acquisition Areas • Spectra Can Also Be Reconstructed From Existing Smartmap And Linescan Datacubes • Linescanning – Collects A Spectral Line Datacube • Truemap Overlap And Background Corrected Mapping And Linescanning (vii) Shipment Will Be Fob Destination And Inspection And Acceptance Is In Accordance With Far Clause 52.212-4(a) (nov 2023) usda Aphis Ppq Science And Technology 22675 North Moorefield Road edinburg, Tx 78541 please Ship The Pallets Shrink-wrapped. warehouse Receiving Hours: 7:30am-2:45pm Cst Monday Through Friday receiving Dock Is Present But, It Is Not Self-leveling. base Security Services Will Give The Truck Driver Directions To The Main Warehouse Upon Arrival At The Destination. for Invoice Processing And Payment. net 15dys Aro in Accordance With Omb Dated 06/07/2012 Accelerating Payments To Small Businesses For Goods And Services usda Uses The Invoice Processing Platform (ipp) For Electronic Submission And Tracking Of Purchase Orders, Invoices, And Payment Information To Its Suppliers Of Goods And Services: Enroll At Https://ipp.gov. The Ipp Is A Government-wide Secure Web-based Invoice Processing Service Offered Free Of Charge To Government Agencies And Their Suppliers By The U.s. Department Of Treasury’s Financial Management Service (fms). upon Contract Award, You Will Receive A Notification Of Your One-time Enrollment Requirement In An Automatic Invoice Payment Notification System Available Through Ipp. This One-time Enrollment In Ipp Means That You Will Receive A Series Of E-mails From Treasury Services. contractors Must Submit Invoices And Attach All Supporting Documentation As Required Within 5 Business Days Of Completion Of Services Provided. Supporting Documentation Include ,for Example; Maintenance Inspection Checklist, Timecard For Labor, Travel Receipts Etc.. The Cotr Will Review The Supporting Documents Before Approving Invoices In Ipp, If Supporting Documentation Is Not Provided The Invoice Will Be Rejected. Ipp Will Issue A Notification To Contractor That They Must Submit Supporting Documentation And Resubmit The Invoice. please See https://www.ipp.gov/vendors/enrollment-vendors.htm and Submit Invoices Through The Invoice Processing Platform (ipp) Enroll At Https://www.ipp.gov/ Ipp Is A Secure, Web-based System That Manages Government Invoicing. (viii) Provision At 52.212-1, Instructions To Offerors-commercial Products And Commercial Services(nov 2021) Does Not Apply To This Requirement (ix) Evaluation: evaluation Of Quotes Will Be In Accordance With Federal Acquisition Regulation ( Far) 13.106-1 (2) And (far) 13.106-2(b)(3) in Accordance With Federal Acquisition ( Far) 13.106-1 (2) The Government Will Award A Purchase Order Resulting From This Solicitation To The Responsible Quote Conforming To The Solicitation That Will Be The “best Value” And Most Advantageous To The Government. In Accordance With Far 13.106-2 (b)(3); Product Offered, Price, And Delivery Are The Factors To Be Considered. brand Name Justification: in Accordance With Far 13.106-1(b)(1)(i) And Far 13.106-3(b)(3)(i). )for Acquisitions Greater Than The Micro-purchase Threshold But Less Than The Simplified Acquisition Threshold (sat) The Contracting Officer May Solicit From One Source Only If The Contracting Officer Determines That The Circumstances Of The Contract Action Deem Only One Source Reasonably Available (e.g., Urgency, Exclusive Licensing Agreements, Brand Name, Etc.). usda Aphis Ppq Science And Technology Already Owns A Tabletop Sem. They Wish To Purchase An Accessory For Use With The Hitachi Tabletop Sem. The Add-on Accessory They Want To Purchase Is The Oxford Aztec Energy Dispersive Spectrometer (eds) With Trumap. any Pursuit Of Comparable Products At This Time Would Result In Substantial Duplication Of Cost To The Government Due To Non Compatibility Of Components And Methods Currently In Use. far Clause 52.225-1, Buy American-supplies (oct 2022) And Far Provision 52.225-2 Buy American Certificate. (oct 2022) Apply To This Purchase. pricing: the Government Will Evaluate Quote Prices In Accordance With The Policies And Procedures Of Part 25.105 Of The Federal Acquisition Regulation. Determination Of Cost Reasonableness Will Be In Accordance With Federal Acquisition Regulation 25.106 (b)(1) (x) Provision At 52.212-3 Representations And Certifications—commercial Items (nov 2023) Applies To This Solicitation And Is To Be Completed Online At Www.sam.gov (xi) The Clause At 52.212-4 Contract Terms And Conditions—commercial Items (nov 2023), Applies To This Acquisition. (xii) The Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Items (dec 2023), Applies To This Acquisition. (a)the Contractorshallcomply With The Following Federalacquisitionregulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: (1)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements(jan 2017)(section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kasperskylab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (3)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (4)52.209-10, Prohibition Oncontractingwith Inverted Domestic Corporations(nov 2015). (5)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023)(31 U.s.c. 3903and10 U.s.c. 3801). (6)52.233-3, Protest After Award(aug 1996)(31u.s.c.3553). (7)52.233-4, Applicable Law For Breach Of Contractclaim(oct 2004)(public Laws 108-77 And 108-78 (19u.s.c.3805note)). (b)the Contractorshallcomply With The Far Clauses In This Paragraph (b) That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] __(1)52.203-6, Restrictions On Subcontractor Sales To The Government(jun 2020),withalternatei(nov 2021)(41u.s.c.4704and10 U.s.c. 4655). __(2)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509)). __(3)52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009(jun 2010)(section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) __(4)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712); This Clause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of The Intelligence Community—see Far3.900(a). x(5)52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards(jun 2020)(pub. L. 109-282) (31u.s.c.6101note). __(6)[reserved]. __(7)52.204-14, Service Contract Reporting Requirements(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(8)52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(9)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (10)52.204–28, Federalacquisitionsupply Chain Security Act Orders—federal Supply Schedules, Governmentwideacquisitioncontracts, And Multi-agency Contracts.(dec 2023)(pub. L. 115–390, Title Ii). __(11)(i)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). __(ii)alternatei(dec 2023)of 52.204–30. x(12)52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed Fordebarment.(nov 2021)(31u.s.c.6101note). __(13)52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters(oct 2018)(41u.s.c.2313). __(14)[reserved]. __(15)52.219-3, Notice Ofhubzoneset-aside Or Sole-source Award (oct 2022) (15u.s.c.657a). __(16)52.219-4, Notice Of Price Evaluation Preference Forhubzonesmall Business Concerns (oct 2022) (if Theofferorelects To Waive The Preference, Itshallso Indicate In Itsoffer) (15u.s.c.657a). __(17)[reserved] x(18)(i)52.219-6, Notice Of Total Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-6. __(19)(i)52.219-7, Notice Of Partial Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-7. (20)52.219-8, Utilization Of Small Business Concerns (sep 2023) (15u.s.c.637(d)(2)and (3)). __(21)(i)52.219-9, Small Business Subcontracting Plan (sep 2023) (15u.s.c.637(d)(4)). __(ii)alternatei(nov 2016)of52.219-9. __(iii)alternateii(nov 2016)of52.219-9. __(iv)alternateiii(jun 2020)of52.219-9. __(v)alternateiv (sep 2023) Of52.219-9. __(22)(i)52.219-13, Notice Of Set-aside Of Orders(mar 2020)(15u.s.c.644(r)). __(ii)alternatei(mar 2020)of52.219-13. __(23)52.219-14, Limitations On Subcontracting (oct 2022) (15u.s.c.637s). __(24)52.219-16, Liquidated Damages—subcontracting Plan(sep 2021)(15u.s.c.637(d)(4)(f)(i)). __(25)52.219-27, Notice Of Service-disabled Veteran-owned Small Business Set-aside (oct 2022) (15u.s.c.657f). x(26)(i)52.219-28, Post Award Small Business Program Rerepresentation (sep 2023)(15u.s.c.632(a)(2)). __(ii)alternatei(mar 2020)of52.219-28. __(27)52.219-29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantagedwomen-owned Small Business Concerns(oct 2022) (15u.s.c.637(m)). __(28)52.219-30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15u.s.c.637(m)). __(29)52.219-32, Orders Issued Directly Under Small Business Reserves(mar 2020)(15u.s.c.644(r)). __(30)52.219-33, Nonmanufacturer Rule(sep 2021)(15u.s.c. 637(a)(17)). x(31)52.222-3, Convict Labor(jun 2003)(e.o.11755). x(32)52.222-19, Child Labor-cooperation With Authorities And Remedies(nov 2023). x(33)52.222-21, Prohibition Of Segregated Facilities(apr 2015). x(34)(i)52.222-26, Equal Opportunity(sep 2016)(e.o.11246). __(ii)alternatei(feb 1999)of52.222-26. (35)(i)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). __(ii)alternatei(jul 2014)of52.222-35. x(36)(i)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). __(ii)alternatei(jul 2014)of52.222-36. (37)52.222-37, Employment Reports On Veterans (jun 2020) (38u.s.c.4212). __(38)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). x(39)(i)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o. 13627). __(ii)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78and E.o. 13627). __(40)52.222-54, Employment Eligibility Verification(may2022)(executive Order 12989). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items Or Certain Other Types Ofcommercial Productsorcommercial Servicesas Prescribed In Far22.1803.) __(41)(i)52.223-9, Estimate Of Percentage Ofrecovered Materialcontent For Epa–designated Items (may2008) (42u.s.c.6962(c)(3)(a)(ii)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(ii)alternatei(may2008)of52.223-9(42u.s.c.6962(i)(2)(c)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(42)52.223-11,ozone-depleting Substancesandhigh Global Warming Potential Hydrofluorocarbons(jun 2016) (e.o. 13693). __(43)52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners(jun 2016)(e.o. 13693). __(44)(i)52.223-13,acquisitionof Epeat®-registered Imaging Equipment(jun 2014)(e.o.s 13423 And 13514). __(ii)alternatei(oct 2015)of52.223-13. __(45)(i)52.223-14,acquisitionof Epeat®-registered Televisions(jun 2014)(e.o.s 13423 And 13514). __(ii)alternatei (jun2014) Of52.223-14. __(46)52.223-15, Energy Efficiency In Energy-consumingproducts(may2020)(42u.s.c.8259b). __(47)(i)52.223-16,acquisitionof Epeat®-registered Personal Computerproducts(oct 2015)(e.o.s 13423 And 13514). __(ii)alternatei(jun 2014)of52.223-16. x(48)52.223-18, Encouraging Contractor Policies To Ban Text Messaging While Driving(jun 2020)(e.o. 13513). __(49)52.223-20, Aerosols(jun 2016)(e.o. 13693). __(50)52.223-21, Foams (jun2016) (e.o. 13693). __(51)(i)52.224-3privacy Training(jan 2017)(5 U.s.c. 552 A). __(ii)alternatei(jan 2017)of52.224-3. x(52)(i)52.225-1, Buy American-supplies(oct 2022)(41u.s.c.chapter83). __(ii)alternatei(oct 2022)of52.225-1. __(53)(i)52.225-3, Buy American-free Trade Agreements-israeli Trade Act(nov 2023)(19 U.s.c. 3301 Note,19 U.s.c. 2112 Note,19 U.s.c. 3805 Note,19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. __(ii)alternatei [reserved]. __(iii)alternateii(dec2022)of52.225-3. __(iv)alternateiii(nov 2023)of52.225-3. __(v)alternateiv (oct 2022) Of52.225-3. (54)52.225-5, Trade Agreements(nov 2023)(19u.s.c.2501,et Seq.,19u.s.c.3301note). x(55)52.225-13, Restrictions On Certain Foreign Purchases(feb 2021)(e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). __(56)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016) (section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). __(57)52.226-4, Notice Of Disaster Oremergencyarea Set-aside (nov 2007) (42u.s.c.5150). __(58)52.226-5, Restrictions On Subcontracting Outside Disaster Oremergencyarea (nov2007) (42u.s.c.5150). __(59)52.229-12, Tax On Certain Foreignprocurements(feb 2021). __(60)52.232-29, Terms For Financing Of Purchases Ofcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). (61)52.232-30, Installment Payments Forcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). x(62)52.232-33, Payment Byelectronic Funds Transfer-system For Award Management(oct2018)(31u.s.c.3332). (63)52.232-34, Payment Byelectronic Funds Transfer-other Thansystem For Award Management(jul 2013) (31u.s.c.3332). (64)52.232-36, Payment By Third Party(may2014)(31u.s.c.3332). __(65)52.239-1, Privacy Or Security Safeguards(aug 1996)(5u.s.c.552a). __(66)52.242-5, Payments Tosmall Business Subcontractors(jan 2017)(15u.s.c.637(d)(13)). __(67)(i)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). __(ii)alternatei(apr 2003)of52.247-64. __(iii)alternateii(nov 2021)of52.247-64. (c)the Contractorshallcomply With The Far Clauses In This Paragraph (c), Applicable Tocommercial Services, That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] (1)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (2)52.222-42, Statement Of Equivalent Rates For Federal Hires(may2014)(29u.s.c.206and41u.s.c.chapter67). (3)52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year Andoptioncontracts)(aug 2018)(29u.s.c.206and41u.s.c.chapter67). (4)52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may2014) (29u.s.c.206and41u.s.c.chapter67). __(5)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). __(6)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (7)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (8)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). __(9)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42u.s.c.1792). (d)comptroller General Examination Of Record. The Contractorshallcomply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of Thesimplified Acquisition Threshold, As Defined In Far2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At52.215-2, Audit And Records-negotiation. (1)the Comptroller General Of Theunited States, Or An Authorized Representative Of The Comptroller General,shallhave Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract. (2)the Contractorshallmake Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminatedshallbe Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Ofclaimsarising Under Or Relating To This Contractshallbe Made Available Until Such Appeals, Litigation, Orclaimsare Finally Resolved. (3)as Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e) (1)notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1), In A Subcontract Forcommercial Productsor Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Downshallbe As Required By The Clause- (i)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509). (ii)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712). (iii)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iv)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kasperskylab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (v)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (vi)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (vii)(a)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). (b)alternatei(dec 2023)of 52.204–30. (viii)52.219-8, Utilization Of Small Business Concerns (sep 2023) (15u.s.c.637(d)(2)and (3)), In All Subcontracts Thatofferfurther Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far19.702(a) On The Date Of Subcontract Award, The Subcontractormustinclude52.219-8in Lower Tier Subcontracts Thatoffersubcontracting Opportunities. (ix)52.222-21, Prohibition Of Segregated Facilities(apr 2015). (x)52.222-26, Equal Opportunity(sep 2015)(e.o.11246). (xi)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). (xii)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). (xiii)52.222-37, Employment Reports On Veterans(jun 2020)(38u.s.c.4212). (xiv)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause52.222-40. (xv)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (xvi)(a)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o 13627). (b)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78ande.o.13627). (xvii)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). (xviii)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (xix)52.222-54, Employment Eligibility Verification(may2022)(e.o. 12989). (xx)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (xxi)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). (xxii)(a)52.224-3, Privacy Training (jan 2017) (5u.s.c.552a). (b)alternatei(jan 2017)of52.224-3. (xxiii)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016)(section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxiv)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations(jun 2020)(42u.s.c.1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause52.226-6. (xxv)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023) (31 U.s.c. 3903and10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of52.232-40. (xxvi)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause52.247-64. (2)while Not Required, The Contractormayinclude In Its Subcontracts Forcommercial Productsandcommercial Servicesa Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. (end Of Clause) the Following Clauses And Provisions Also Apply To This Acquisition 52.252-2 Clauses Incorporated By Reference. (feb 1998) 52.204-13, System For Award Management Maintenance (oct 2018) 2.204-18 Commercial And Government Entity Code Maintenance. (aug 2020) 52.204-21 Basic Safeguarding Of Covered Contractor Information Systems. (nov 2021) 52.212-4 Contract Terms And Conditions—commercial Items. (nov 2023) 52.232-40 Providing Accelerated Payments To Small Business Subcontractors. (mar 2023) 52.204–28 - Federal Acquisition Supply Chain Security Act Orders—federal Supply Schedules, Governmentwide Acquisition Contracts, And Multi-agency Contracts. (dec 2023) 52.204–30 - Federal Acquisition Supply Chain Security Act Orders—prohibition. (dec 2023) 452.204-70 Modification For Contract Closeout. (july 2022) 52.252-1 Solicitation Provisions Incorporated By Reference. (feb 1998) 52.204-7 System For Award Management(oct 2018) 52.204-16 Commercial And Government Entity Code Reporting. (aug 2020) 52.204–29 Federal Acquisition Supply Chain Security Act Orders—representation And Disclosures. (dec 2023) 52.211-6 Brand Name Or Equal. (aug 1999) 52.212-3 Offeror Representations And Certifications—commercial Products And Commercial Services. (nov 2023) 52.225-2 Buy American Certificate. (oct 2022) (xiii) Additional Contract Requirements Or Warranty warranty implied Warranty - The Government’s Post Award Rights Contained In 52.212-4 Are The Implied Warranty Of Merchantability, The Implied Warranty Of Fitness For Particular Purpose And The Remedies Contained In The Acceptance Paragraph. additional Warranty - : Explain All Details Of The Warranty. If An Extended Warranty Is Available Explain Details Of Extended Warranty Including Price And Availability After Initial Warranty Expires. The Quoter Shall Extend To The Government The Full Coverage Of Any Standard Commercial Warranty Normally Quoted In A Similar Commercial Sale, Provided Such Warranty Is Available At No Additional Cost To The Government. Acceptance Of The Standard Commercial Warranty Does Not Waive The Government's Rights Under The Inspection Clause Nor Does It Limit The Government's Right With Regard To The Other Terms And Conditions Of This Contract. In The Event Of A Conflict, The Terms And Conditions Of The Contract Shall Take Precedence Over The Standard Commercial Warranty. The Contractor Shall Provide A Copy Of Its Standard Commercial Warranty (if Applicable) With This Response. (xiv) There Is No Defense Priority Allocation For This Requirement. (xv) The Date, Time And Place Quotes Are Due: interested Vendors Please Email (only) This Attachment 1 By 4pm (mt) 03/08/2024 To: Email: Carol.dingess@usda.gov Please Include Rfq# Ppq1118207on Subject Line questions Via Email Only - Are Due Nlt 8:am (mt) 03/01/2024 (xvi) The Name And Contact Info Of The Individual To Contact For Information Regarding This Rfq Is The Same As Item (xv)

Details: Description Procurement Of Equipment, Machinery, Materials/supplies And Other Necessary Items For The Beneficiaries Of Daetpreneur: Nurturing Success For Self-employed Workers In Daet Powertools Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 1 Unit Cut Off Machine, Continuous Rating Output 2,000 Watts, Wheel Diameter: 355mm (14”), Hole Diameter: 25.4mm (1”), No Load Speed: 3,800rpm, 4”diameter 1 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Up To 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 1 Unit Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 1 Set Needle File Set, (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File); Color Black; Metal Type: Carbon Steel; Handle Material: Wood, Alloy Steel; Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h) 1 Set Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 1 Unit Welding Magnets, 6 Pcs/set, Overall Length: At Least (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 1 Set Food Vending Materials/supplies Adjustable Hot Air Blower Sealing Machine Heating Machine; Power Supply: Ac220v; Output: 2000w ; Air Flow: 250-450l/min; No-load Speed: 8000rpm; Temperature Range: 60-600°c; Item Size: Approx. 25cm (l) X 7cm (w) X 19. 5cm (h) 1 Pc Barbecue Air Blower With Charger, Material: Iron, Voltage: 12v - 220v, Output:100w, Clamp: 12v,size For 100w Blower: Approx 23x21x17cm/9. 05x8. 27x6. 69in--- Air Duct Diameter 4. 5cm/1. 77in 1 Unit Barbeque Grill With Stand, Heavy Duty, L=19 Inches, W=12 Inches, H=33 Inches, Stainless Griller And G. I. Pipe Stand 1 Unit Basin; Stainless; Diameter: 22", Base: 16"; Depth: 7"; Thickness: 1cm 3 Pc Beach Umbrella, Round-shaped; Material: Poly Canvass; Diameter: 60"; Pole Stand Length: At Least 45"; Pole Material: Stainless Steel Chrome 4 Pc Cake Decorating Kit Stainless Icing Piping Nozzles Pastry Tips Cake Decorating Tips Set Stainless, 27 Stainless Steel Tips And 2 Reusable Plastic Couplers, Cake Decorating Tips: Closed Star, Open Star, French, Round, Plain, Leaf, And Petal; Strong, Durable, Stainless Steel; Corrosion Resistant 1 Set Caldero With Double Handle; Aluminum Material; Diameter;40cm; Height 28cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 7 Pc Casserole Set, Material: Stainless Steel, Diameter: 28, 30 And 32cm, Height: 16, 18, 20cm 6 Set Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 3 Pc Chest Cooler, Item Package Dimensions: ‎25. 8" (l) X 16. 2" (w) X 15. 7" (h), Package Weight: ‎5. 76kg, Inside Dimensions: 24. 95" (l) X 14. 58" (w) X 14. 77" (h), Material: ‎plastic, Chamber Depth: 24. 95", Capacity: 52l 12 Pc Chest Type Freezer, Solid Top With Glass Cover,hd Inverter 5. 5cu. Ft. , Weight:37 Kg,dimensions: 75. 5 × 57 × 87. 5 Cm, Fast Freezing Mode, Dual Function Technology (freezer Or Chiller), Led Lights, Key Lock, Roller Feet, Frontal Temperature Control, 1 Unit Chopping Knife; 10" Stainless; Wood Handle 1 Pc Colander With Handle (material: Stainless Steel, Size Medium: Top Diameter-23. 5 X Base Diameter-19. 5 X Height-7. 8 Cm) 8 Pc Commercial Blender,volume Capacity:1. 5l, Dimension: 26x27x47cm , Input Voltage 220v, Power Consumption: 1200w, 3 Horsepower, 38000 Rpm , Weight: 5kg 1 Unit Deep Electric Fryer, Capacity: 12l, Material: Stainless Steel, Voltage: 220v 60hz, Power: 2. 5kw + 2. 5kw, Temperature: 60° - 200°c, Basket Size: 18x20x10cm * 2 Basket, Pan Size:50x30x13cm, Machine Size:53x41x28cm 1 Unit Digital Kitchen Scale, Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0. 05 Oz Increments; Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade; Stainless Steel Platform: Approx. Dimension 7. 45110. 5" (l) X 5. 45053. 90" (w) X 0. 6-08" (h); 2 X 1. 5v Aaa Batteries 1 Pc Digital Weighing Scale, Capacity: 60kg, Material: Stainless Steel, Five Memories For Unit Price, Dual Display: Weight, Unit, Price, Amount, Automatic Energy Saving Mode, Led Display, Built In 4v/$ah Rechargeable Battery,power Supply: Ac/dc Charger Included, Operating Time: Over 3 Months When Fully Charged, Low Voltage Display And Overcharge Protection 1 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 15 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 12 Unit Food Storage Plastic, Set, 4 Pcs. Rectangular Plastic, Secure-fit Lid; 17x12. 2x5. 5cm (650ml); Materials: Polypropelene (pp) Food Grade Plastic Atleast 1mm Thick 2 Set Food Tong, Material: Stainless Steel, Length: 14" 6 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 48 Pcs Food Tray, Flat, Stainless , 37x47x2cm, Depth: 2cm 16 Pc Food Tray, Stainless(flat), 60x40x2cm , Depth: 2cm 4 Pc Freezer Chest Type, Gross / Net Volume 10. 6 Cu. Ft. (10 Liters) / 10. 1 Cu. Ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111. 4 X H 84. 7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 1 Unit Frying Pan 14" In Diameter, Cast Iron 8 Pc Gas Regulator And Accessories; With Gauge And Safety Device; Safety Push Protection For Leakage; Gas Auto Safe Controller; Rubber Gasket; Steel Belted; 1. 8m Hose, With Clamp 17 Set Industrial Pail With Cover And Metal Handle (20 Liters), Plastic Type: Pp 1 Pc Kawa; Big, Size: Diameter 52cm Height 18cm; Material: Aluminum; Double Handle 11 Pc Llanera, Round, Size: 7inches Diameter 3inches Height, Material: Aluminum 10 Pcs Lpg Tank; 11kg Cylinder 21 Unit Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups. The Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7. 13" (l) X 6. 75" (w) X 4. 38" (h); Measuring Capacity: 500ml 2 Set Measuring Spoons (set), 7pcs. Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0. 63ml), 1/4 Tsp (1. 25ml), 1/2 Tsp (2. 5ml), 3/4 Tsp (3. 75ml), 1 Tsp (5ml), 1/2 Tbsp (7. 5ml), 1 Tbsp (15ml) 2 Set Milk Tea Barrel, Product Size: 12l, Barrel Body Diameter: 24cm, Barrel Height: 47cm, Actual Capacity: 9. 50kg (9. 5l),product Material: Stainless Steel For Food Contact, Insulation Layer: Polyurethane Foam, Product Heat Resistance: 150⁰c, Product Cold Resistance: -30⁰c, 1 Unit Milk Tea Cup Sealer Machine, Degree Of Automation: Manual, Power: 270, Power Consumption: 270w, Maximum Size Of Applicable Container: 95, Weight: 9kg, Production Capacity: 80, Function: Sealing, Sealing Speed: 1-2s, Temperature Control Range: 0-250, Processing Customization: No, Dimensions: 27*24*65 Cm 1 Unit Milktea Pearl Container, Type: Whole Cover Lid, Material: Acrylic, Dimensions:17. 6 X 16. 2 X 10cm, Capacity: 1. 53l 2 Pcs Mixing Bowl Medium, Approx. Diameter: 28cm, Height: 11. 2cm; Material: Stainless; Capacity: Atleast 4l 6 Pc Monoblock Chair, Front Leg Distance 355mm Width Seat, With Backrest, Color: Beige, Seat Width: 375mm, Depth 330mm, Side Legs Distance Left: 378mm, Side Legs Distance Right: 378mm, Back Legs Distance: 210mm, Back Rest Height: 779mm, Set Back Height: 405mm, Seat Height: 376mm, Gross Weight: 2. 25kgs 12 Pc Monoblock Stool, Color: Beige, Legs Distance: 264 Mm, Seat Diameter: 320 Mm, Seat Height: 442 Mm 1 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 13 Pc Muffin Pan, 12 Holes; Inner Dimension: L35cm X W26cm X H3cm; Diameter: 6. 3cm; Material: Nonstick Carbon Steel; Weight: 360g; 1 Pc Muffin Pan, 6 Holes; Inner Dimension : L26. 5cm X W18. 5cm X H3cm; Diameter: 6. 3cm; Outer Dimension: L26. 5cmxw18. 7cmxh2. 7cm; Outer Diameter: 6. 5cm/4. 6cm; Usage : Muffin, Cupcakes Baking (full Size Cavity); Material : Non Stick Carbon Steel; Weight : 230g; 1 Pc Multi Dual Action Air Brush; Color: Silver + White; Material: Aluminum + Copper + Rubber + Nylon + Plastic; Plug Type: Eu / Us (optional); Input: 100-250v, Frequenzy: 50/60hz, 0. 6a Max Output: 12v Dc, 1. 6a; Air Output Per Min: 8l/min; Max Pressure: 25-30psi; Nozzle Diameter: 0. 3mm; Fluid Cup Capacity: 7cc Diameter Of Hose: 1/8"; Silicone Hose Length: 1. 5m; Air Compressor Size: 120 * 95 * 65mm / 4. 72 * 3. 74 * 2. 56in Airbrush Size: 14. 7 * 2. 8 * 8. 5cm / 5. 8 * 1. 1 * 3. 3in Item Weight: 791g / 27. 90oz (a Set) Package Size: 23. 88 * 17. 53 * 7. 62cm; (accessories Included: 1 * 0. 3mm Airbrush; 1 * Air Brush Holder; 1 * Air Compressor; 1 * Mini Air Filter; 1 * Air Hose; 1 * Ac Transformer; 1 * Instruction Manual ) 1 Set Multi-function Food Processor With Blender And Dry Mill With 4 Interchangeable Stainless-steel Blades For Slicing, Fine And Coarse, Shredding, And Chopping, 1. 0l Food Processor Capacity, 500watts, 220 Volts, Dimension: Whd 39x20x36 Cm, Housing Material: Metal; Pulse Switch, Safely Locking Lid, With Cord Storage, Non-slip Feet, Dishwasher Safe 2 Unit Package 1: Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 1 Unit Package 2. 1: 4 Plates Industrial Oven, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 36 X 25 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; G. I. Sheets Inner And Outer Walls And Stainless-steel Front Panel, With Tempered Glass; About 4-inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 1 Unit Palamigan Container W/ Gripo 15l, Dimension: 31. 8x23. 8x48. 5cm, Material: High Quality Durable Plastic 6 Pc Peanut Grinder, Material: Metal, Others, Galvanized, Stainless; Grinder Type: Electric; Food Processor Settings: Variable (manual); Volume Capacity: 3l; Input Voltage: 220v; Frequency: 60hz; Power Consumption: 1500w; Weight: 25kg; Dimension (l X W X H): 40x55x65cm; Speed ​​rated: 1400r / Min; Drill Width: 140mm; Rotation Direction: Counter Clockwise; Production Granulity: 30-200 Mesh 1 Unit Peanutbutter Jars; Dimension: Medium 13cm (h) X 7cm (dia) Plastic Pet Jar With Lid; 400ml 100 Pcs Puto Cups, Big, 24pcs/set, Plastic, Any Color 11 Sets Puto Cups, Small, 24pcs/set, Plastic, Any Color 11 Sets Sandok; 14" Length, Stainless Steel 10 Pc Shansi/pan Turner, Stainless (big) 9" Length 7 Pc Shrink Wrap Film/ Cap Seal; Dimension: 91mm X 26-30mm; 100pcs/pack 1 Pack Shrink Wrap Film/ Cap Seal;dimension: 119 Mm X 30-35 Mm ;100pcs/pack 1 Pack Single Burner Cast Iron Automatic Ignition Gas Stove, Total Length: 55cm/22 Inches Approx, Inner Burner Diameter: 18cm/7. 5 Inches Approx. , Total Outer Diameter: 28cm/11. 5 Inches Approx With Gas Regulator And Accessories 4 Unit Siomai Steamer Electric, 220w 3 Layers 23x 16, Glass 220v, Dimension: Lwh 34x21x61 Cm, 50-60hz, Sliding Glass Opener, Body Made In Steel And Glass 2 Pc Spanish Peanuts; Per Kg 5 Kgs Spatula (big), Heat Resistant Silicone, Approx. Dimension 14-15" (l) X 3-4" (w) X 0. 2-0. 5" (thickness); Color: White 4 Pc Standmixer, 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4. 5l W/ 5-speed Turbo Function; Color: Black, 350 Watts, 230volts/60hz; Body Material: Plastic, Blade Material: Stainless Steel, Dimension: Lwh 26x24x30cm 5 Unit Steamer; Aluminum; About 16" Diameter; 3 Layers With Cover; With Handle Per Layer 6 Set Vegetable Oil; 1 Liter 14 Liters Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 5 Pc Fabricated Nego Cart 1. Hauler 2, Body Materials: G.i. Pipe 3/4" (2pcs), G.i. Pipe 1" (2pcs), G.i. Pipe 1/2"(40pcs), Flat Bar 1/4x1"(4pcs), Side Wheel (300x17), Leaf Spring (7 Layers), Coilspring, Bolt And Nut Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Mint Green 1 Unit 1. Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole & Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Mint Green 2 Unit 1. Nego-kart With Bmx Bicycle; Fabricated (please See Attached Design And Specifications) Note: With Dole, Dilp & Negosyo Sa Kariton Logo At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6”x W-51” And H-23.6” X W29.5” Fully Painted Color: Mint Green 1 Unit 1. Hauler 1, Body Materials: Side Seat, Leaf Spring, Coilspring, G.i. Pipe 1" (4pcs), Flat Bar 2", 1 Roundbar 12mm 1pc , Epoxy Primer, Bolt & Nuts, Side Wheel Axle 1pc Note: With Dole & Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Mint Green 1 Unit T-shirt And Mug Printing Equipment, Materials/supplies Exposure Unit, 6 Uv Tubes,power Supply: 220v,printing Area: 45cm * 60cm, Appearance Size: 38cm * 39cm * Height 8.5cm, Ultraviolet Wavelength: 365-435nm,material: Metal Shell, Using 6 Ultraviolet Lamps 1 Unit Heat Press Machine, Printing Size: 38cm X 45cm, Voltage: 110v - 220v, Power: 1800w, Temperature Range: 0-220°c, Time Range: 0-999s, Weight: 27kgs, Packing Dimension: 82cmx45cmx46cm, Led Control Panel,teflon Coated Plate, Rubber Pad Working Area 1 Unit Mug Press Machine, Automatic Grade: Semi_automatic, Type: Heat Press Machine, Usage:mug Printer, Color & Page:multicolor, Voltage:110v/220v, Gross Power:300w/350w, Dimensions(l*w*h): 41*36*21cm, Weight: 7kg 1 Unit Paint Mixing Spatula, Material: Stainless Steel Metal With Wooden Handle, Size: 4” Metal Part, Handle 4” 1 Pc Printer, Print: Printer Type: Print, Scan, Copy,printing Technology: Print Method:on-demand Inkjet (piezoelectric) Printer Language:esc/p-r, Esc/p Raster Nozzle Configuration:180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 5760 X 1440 Dpi Automatic 2-sided Printing: No, Print Speed: Photo Default - 10 X 15 Cm / 4 X 6" *1:approx. 69 Sec Per Photo (border) / 90 Sec Per Photo (borderless)*2 Draft, A4 (black / Colour):up To 33.0 Ppm / 15.0 Ppm*2 Iso 24734, A4 Simplex (black / Colour):up To 10.0 Ipm / 5.0 Ipm*2 First Page Out Time From Ready Mode (black / Colour): Approx. 10 Sec / 16 Sec*2, Copying: Maximum Copies From Standalone:20 Copies,maximum Copy Resolution:600 X 600 Dpi,maximum Copy Size:a4, Letter Iso 29183, A4 Simplex (black / Colour):up To 7.0 Ipm / 1.7 Ipm,pc Printing/ Premium Glossy Photo Paper Best Photo:sound Power (black / Colour) 5.1 / 5.2 B(a),sound Pressure (black / Colour) 38 / 39 Db(a)pc Printing / Plain Paper Default*4:sound Power (black / Colour) 6.4 / 6.2 B(a),sound Pressure (black / Colour) 50 / 48 Db(a) Scanning: Scanner Type:flatbed Colour Image Scanner, Sensor Type:cis Optical Resolution:600 X 1200 Dpi Maximum Scan Area:216 X 297 Mm Scanner Bit Depth (colour): 48-bit Input, 24-bit Output Scanner Bit Depth (grayscale):16-bit Input, 8-bit Output Scanner Bit Depth (black & White):16-bit Input, 1-bit Output, General: Operating System Compatibility:windows Xp / Xp Professional / Vista / 7 / 8 / 8.1 / 10,windows Server 2003 / 2008 / 2012 / 2016 / 2019,mac Os X 10.6.8 Or Later, Electrical Specifications:rated Voltage:ac 220-240 V,rated Frequency:50-60 Hz,operating:14.0 W,sleep:0.4 W,power Off:0.2 W Standby:4.0 W,interface:usb:usb 2.0, Dimensions And Weight:dimensions (w X D X H):375 X 347 X 179mm,weight:3.9 Kg, Consumables: Black Ink Bottle: Page Yield*5: 4,500 Pages Order Code: 003 (c13t00v100 / C13t00v199 (indonesia)) Cyan Ink Bottle: Page Yield*5: 7,500 Pages (composite Yield) Order Code: 003 (c13t00v200 / C13t00v299 (indonesia)) Magenta Ink Bottle: Page Yield*5: 7,500 Pages (composite Yield) Order Code: 003 (c13t00v300 / C13t00v399 (indonesia)) Yellow Ink Bottle: Page Yield*5: 7,500 Pages (composite Yield) Order Code: 003 (c13t00v400 / C13t00v499 (indonesia)) 1 Unit Silk Screen Printing Frame, Material Wood, High Tension 45 Degree Cross Cut Miter Joint, V-nail Secured, Size: Extra Large: 15"x20.75" (inside Dimension) 5 Pcs Squegee, Material:rubber With Aluminum Handle, Size: 3inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 4inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 5inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 6inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 7inches 1 Pc Squegee, Material:rubber With Aluminum Handle, Size: 8inches 1 Pc Stainless Coater, Material: Aluminum, Size: 30cm 1 Pc Sublimation Blank Mug, Material: Ceramic, Capacity: 11 Oz/300 Ml, Product Size 8.2*9.5cm, Color: Black, Shape: Round 45 Pcs Sublimation Paper 100gsm, Size: A4, 100 Sheets Per Pack 4 Packs Events Decorations Materials/ Supplies Arch Flower Stand, Material: Iron, Size: 140x38x240cm / 55.1*15*94.5", Pipe Diameter: 13mm, Color: Preferably White 2 Pcs Artificial Grass Carpet, Material: Polyester Fiber, Thickness: 3cm, Size: 1meter X 4meters 1 Yard Artificial Tulip Flower, Material: Pu Latex + Plastic, Flower Heads Height: 4.5cm, Total Length: 34cm, Assorted Colors: Champagne, White, Pink, Red, Blue 16 Pcs Background Stand Backdrop Support Technical Specs: Light Stand: Material: Aluminum Alloy, Sections: 3,max Height: 2m, Min Height: 0.9m, Folded Height: 07m, Diameter Of Legs: Φ22cm, Net Weight: 2.4kg Light Stand: Material: Aluminum Alloy, Sections: 3,max Height: 2m, Min Height: 0.9m, Folded Height: 07m, Diameter Of Legs: Φ22cm, Net Weight: 2.4kg Cross Bars: Material: Aluminum Alloy, Interlocking Cross Bars, Sections: 3, Diameter: 70cm,max Length: 2m, Min Length: 1.4m; Heavy Duty Spring Clamps: Material: Nylon, Holds Canvas, Muslin Or Paper 1 Set Balloon Stand With Base Kits, Material: Plastic, Size: Base 21cm(8.26"), Tube 120cm(50") 6 Pcs Electric Balloon Pump With 2 Inflation Nozzles, Voltage: 110 - 240v, Plug: Us / Eu, Power: 800w, Material: Plastic, Frequency: 50hz / 60hz, Power Supply: - Us: Ac110v ~ 120v, 60hz - Eu: Ac220v ~ 240v, 50hz , Color: Red, Product Weight: 1689 G / 59.58 Ounces, Product Dimensions (l*w*h): 150*190*140 Mm / 5.91*7.48*5.51 Inches, Package Weight: 1600.0 G / 56.44 Ounces, Package Dimensions (l*w*h): 160*200*150 Mm / 6.30*7.87*5.91 Inches 1 Unit Foam Sheet, Size: 200cmx60cm, Thickness: 3 Mm, Assorted Colors (white, Light Pink, Light Green, Light Violet, Light Orange, Light Yellow) 4 Rolls Plain Cloth, Silk, Assorted Colors (black, Silver, Matte Gold, Dark Peach, Light Violet) - 30 Yards Each 150 Yards White Roman Column Pillar, Color: White, Material: High-quality Resin Material, Height 87cm, Width 14cm 4 Pcs Sewing Equipments/supplies Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 1 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm With Flat Table , Size : L107cm X W54cm Xh75xm) 1 Unit Flat Iron, Ceramic Sole Plate At Least 8" (l); Rated Voltage: 230v; Rated Power: 1600w; Water Tank Capacity: 220ml 1 Unit French Curve, Material: Plastic; Color: White; Size: Approx. 58cm (l) X 40cm (w) 1 Pc Geena Silk Fabric (assorted Colors); W- 96" 20 Yards L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 1 Pc Meter Stick, Color: Yellow; Wood Type; About 100 Cm 1 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 1 Box Tape Measure, Material: Durable Soft Plastic; Color: Preferably Blue; Measurements: Inches (can Measure Up To 60") And Centimeters (can Measure Up To 150cm) 2pcs

Details: Description Quantity Unit Item Description 1 Unit Vacuum Forming Machine Item Specifications Sheet Size: 330 Mm X 250 Mm Maximum Sheet Thickness: 3.0 Mm Minimum Sheet Thickness: 0.2 Mm Forming Area: 280 Mm X 200 Mm Maximum Depth Draw: 200 Mm Dimensions: L400 X W335 X H405 Mm Weight: 9 Kg Standard Input Voltage: 100 V - 240 V Standard Frequency: 50, 60 Hz Standard Wattage: 1.32 Kw Noise Level: 65 Db Heater Temperature: Up To 250 Deg Celsius Inclusions: Plastic Sheets (10pcs) Desktop Computer Desk With Metal Frame And Wooden Top English Manual Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 1 Unit Uniit 3d Pellet Printer Item Specifications Print Technology: Dual Direct Drive Pellets, Independent Extruder Build Volume: At Least 290 X 185 X 200 Mm (minimum) Dual Printing: At Least 280 X 165 X 200 Mm (minimum) Mirror Printing: At Least 147 X 185 X 200 Mm (minimum) Print Capability: Mirror Printing, Dual Printing Pellet Diameter: 3 - 5 Mm Layer Resolution: 10μm Extruder Maximum Temperature: 300º C Build Plate Leveling: Semi- Automatic -manual Nozzle Diameter (mm): Direct Drive Hr: 0.15 - 0.25 - 0.4 - 0.6 - 0.8 Mm Pellet: 0.4 - 0.6 - 0.8 - 2.0 - 4.0 - 5.0 Mm Connectivity: Usb, Wifi, Sd Card Display : 5" Color Touch Screen Control Devices: Pc, Tablet, Smartphone Control Mode: Web Direct Drive: Abs, Asa, Nylon, Pet-g, Pla, Pp, Tpu, Pla-3d870, Pva Pellets: Pla, Abs, Petg, A93, Wood, Abs+cf, Pc, Hdpe, Ultem, Peek Slicing Software Included: Professional Software 1 Unit Print Bed 1 Set Starter Material Dimensions: 550mm X 440mm X 460mm Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 1 1 1 Unit Nit 1 Unit Polyetheretherketone (peek) 3d Printer Item Specifications Printing Technology: Fused Filament Fabrication (fff) Extruder: Single Extruder Diameter: Swappable 0.25, 0.4, 0.6 And 0.8mm Nozzle, Default 0.4mm Layer Resolution: 0.05-0.4mm Position Accuracy: Xy:0.025mm, Z:0.0025mm Print Speed: 30-200mm/s Filament Diameter: 1.75mm Build Platform: Pi + Glass Ceramics Supported Filament: Peek, Pekk, Pei, Ppsu, Abs, Pc, Nylon, Carbon Fiber-filled, Petg, Pva, Pla, Tpu, Hips, Woodfill, Metalfill, Etc. Language: Chinese & English User Interface Features: Full-color Touch Screen Connectivity: Sd Card, Usb Camera: Yes Power Failure Recovery: Yes Filament Absent Warning: Yes Build Plate Leveling: Auto Leveling, Manual Leveling Build Volume: 10.3"*10.3"*10.3"(260*260*260mm) Dimensions: 530*490*645mm Weight: 46kg Heated-plate Temperature (max): 160°c Extruder Temperature (max): 450°c Heated Chamber (max): 90°c Software: Appropriate 3d Printing Slicing Software; Compatible Software: Simplify3d & Cura Input Supported File Type: .stl, .obj, .obj, .x3d Output Supported File Type: Gcode Operating Environment: Temperature: 15°c To 32°c Humidity: 30% To 70% Storage Environment Temperature: 0°c To 54°c Humidity: 10% To 85% Material Storage Environment Temperature: 13°c To 24°c Humidity: 20% To 50% Voltage Input: 100~120vac (110v Version Only, Refer To The Nameplate) 200~240vac (220v Version Only, Refer To The Nameplate) 47~63hz Power: 1200w Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Professional Image Processing Software (segmentation, Analysis And Simulation) Item Specifications An Image Processing Software That Allows The User To Import, Visualize And Segment Medical Images (such As Images From A Ct Or Mri Scanner). Users Can Check And Correct The Segmentations And Create Digital 3d Models. The Models Can Then Be Used For Measuring, Treatment Planning And Producing An Output File To Be Used For Additive Manufacturing (3d Printing). A Software That Combines Cad Tools With Pre-processing (meshing) Capabilities. It Should Work On Triangulated (stl) Files Which Makes It Suitable For Freeform 3d Data, Like The Anatomical Data Coming From The Segmentation Of Medical Images. The Software May Be Used To Import Anatomical Data And Other 3d Objects In Stl Format. Once Objects Have Been Loaded, They Can Be Used For Many Applications Including Measuring, Designing, Modeling And 3d Printing. The Software Should Allow For Thorough 3d Measurements, Analyses, Surgical Planning And More. 1.base Functionality • Importing Medical Images In Dicom Format And Other Formats (bmp, Tiff, Jpg And Raw Images) • Viewing Images And Dicom Data • Selecting A Region Of Interest Using Generic Segmentation Tools • Verifying And Editing A Region Of Interest • Calculating A Digital 3d Model And Editing The Model • Measuring On Images And 3d Models • Exporting Images, Measurements, And 3d Models To Third-party Package 1.1 Base: Image Import Load And Process Stacks Of 2d Images From Several Formats Including Dicom 3.0 Format, Bmp, Tiff, Jpg And Raw Images. The Data Is Loaded And Then Stored In A File Format (original Input Images Are Not Modified). Both During And After Import, The User Can Inspect Not Only The Images But Also Associated Dicom Data (if Present In The Image Files). The Software Should Represent And Visualize The Images As Either Gray Values Or Hounsfield Units. Ct Images Are Always Calibrated Based On The Hounsfield Units, With The Intensity Of Water Being 0. Background Air Typically Has A Value Of –1000. The User Can Choose (as A Preference) To Offset The Units By 1000 To Obtain Positive Values In The Range Of 0 To 4095. 1.2 Base: Visualization After Import, The Images Should Be Displayed: The Original Scanner Images Together With The Two Orthogonal Sections. In The Case Of Axial Images, The Coronal And Sagittal Sections Are Created. The Software Should Offer Features And Settings To Control Image Visualization, Including The Following: • Rotate, Pan, And Zoom • Fit To Screen / Full Screen • Reslice Images • Fluoroscopy Simulation • Contrast And Brightness • Interpolation Of Images • Viewing Direction • Image Filters • Alignment Image • Scatter Removal Filter • Pseudo Color Visualization • Image Layouts • Navigation. • Cine Loop For 4d Datasets • Overlay While The Above Part Applies To Visualization On The 2d Images, Features And Settings Related To Visualization In 3d Include The Following: • 3d Preview • 3d Rendering And Shading • Contour Visualization • Transparency • Clipping • Colors 1.3 Base: Measurement Tools Tools To Measure Distances (in Mm), Angles (in Degrees), Etc., As Specified Below. Measurements To Be Displayed With 4 Digits Behind The Decimal Point, However Accuracy Of Measurements Is Inherently Limited By The Pixel Size Of The Images. Measurements Can Be Performed Either On The 2d Images Or In The 3d Workspace. Supported Measurements Include: • Distance, Angle, Radius, Length, And Diameter Measurements • Minimal Distance Over Surface • Measure Ellipse And Area • Centerline Measurements • Profile Line • 3d Histogram • Intensity Monitoring • Intensity Measurement In Region Of Interest 1.4 Base: Segmentation Tools Tools To Produce A Binary ‘mask’ As Output, Representing The Region Of Interest. A Mask Defines For Each Voxel In The Image Data Whether It Is Part Of The Region Of Interest Or Not. Note That The Original Images Are Visualized Together With The Segmentation Results, No Original Information Is Lost Or Hidden. Multiple Different Segmentation Objects (masks) Can Be Made In One Session. Visualization Of One Or Multiple Masks Can Be Done In 2d As Well As In 3d Using Specific Colors. The Generic Segmentation Tools Required: • Global And Local Thresholding • Region Growing • Dynamic Region Growing • Segmentation By Livewire • Manual Editing (‘edit Mask’) • Cavity Fill • Smooth Mask • Smart Fill And Smart Brush • Morphology Operations • Boolean Operations • Multiple Slice Edit And 3d Interpolate • Split Mask • Mask Properties • Compare Masks • Segment Thin Bone • Segment Vessel • Label • Tracing Thin Structures • Ct Bone Wizard • Calculate Part (from Mask) • Calculate Mask From Object 1.5 Base: 3d Editing Tools After 3d Objects (stl Objects) Are Created, The Software Should Support The Editing Of Those Objects. Supported Operations Include: • Edit Contours • Smooth, Wrap And Reduce • Mirror, Transform And Boolean 1.6 Base: Export Tools Export Capabilities: • Project To Dicom • Image To Dicom • Dicom Tags • Bmp/jpeg • 3d View To Dicom • 360 View To Dicom • 2d Mask Area • Grayvalues • 3d Parts (binary Stl, Ascii Stl, Dicom Encapsulated Stl, Dicom Sso, Mgx, Dxf, 3mf, Dicom Encapsulated Obj, Wavefront Obj, Vrml 2.0, Ply, Point Cloud) • Txt And Cloud (share) • Media (print, Save Screenshot, Capture Movie) 1.7 Base: Other Tools • Registration Tools: Allows Registering Imported 3d Models Onto 3d Models Created In Different Image Datasets. • Anonymize Images: Anonymize The Dicom Tags From The Imported Images. • Project Metadata: Define Any Custom-defined Metadata And Store It Inside The Project. The Tool Allows To Add, Modify, And Delete Metadata. • Run Matlab Script: Run Custom Matlab Script On Some Of The Objects In The Project. • Reporting Tools: Printing, Save Screenshot, Capture Movie 2. Analysis Functionality Users Should Be Able To Indicate Landmarks And Annotate And To Construct Geometrical Entities Or ‘analytical Primitives’ (points, Lines, Planes, Circles, Cylinders, Spheres, Splines, Centerlines), Which Can Serve To Indicate Anatomical Landmarks, Anatomical Axes, Anatomical Planes, Or Planned Resection Planes, Etc. These Geometrical Entities Can Be Created By Drawing, By Fitting, By Entering Coordinates, Radius, And Vectors, Or By Creation Of Entities Based On Previously Created Entities Using A Few Predefined Creation Methods (‘create Primitives’ Tool). On The Images And 3d Models, Polylines Can Also Be Grown. The Created Entities Can Be Exported To A Cad System In Iges Format. Users Should Be Able To Perform Advanced Measurements, Advanced Measurements Based On Centerlines And Splines, Wall Thickness Analysis, Part Comparison Analysis, Curvature Analysis, Distance To Curve Analysis, Distance To Curve Over Surface Analysis, Midplane Thickness Analysis, Extrema Analysis, Self-supporting Analysis & Collision Detection. 3. Simulation Functionality Users Should Be Able To Evaluate The Patient’s Anatomy, Performing Measurements, And Planning Osteotomies And Distractions In 3d. The Software Should Have A Tool That Supports 3d Cephalometry And Allows The User To Perform Several Standard Analyses (templates) Listed In A Library. Each Analysis Lists The Landmarks That Need To Be Defined. Planes And Measurements Are Indicated Automatically If You Have Defined All The Necessary Landmarks. Landmarks Can Be Placed In 2d And 3d. New Analyses Can Be Created And Saved, And Points And Planes Can Be Imported From Other Existing Cephalometric Analyses. The Software Should Also Offer A 3d Environment For Planning Certain Surgical Steps Like Cuts Etc. Osteotomies And Distractions Are Implemented (a Distractor Can Be Chosen Out Of An Available Distractor Library). Attention To Be Paid To The User-friendliness Of The Software: A Wizard Guides The User Through The Steps Needed To Achieve Bone Repositioning. • Select Osteotomy Or Distraction: Choose Osteotomy (lefort 1, Lefort 2, Lefort 3, Ramus Lengthening, Bilateral Sagittal Split, Simple Plane, Freeform) • Choose Distraction (alveolar Distraction, Unilateral And Bilateral Ramus Lengthening, Maxillary) • Define The Necessary Landmarks: Automatic Placement Of The Cutting Path, And Possibility To Adjust The Suggested Position Cutting Path • Cut And Split The Chosen Object • Reposition The Created New Part To Desired Location During The Planning Process, The Objects And Distractors Should Be Seen In 3d As Well As In 2d. All Positions Of The Moved Parts Can Be Saved, And It Is Possible At Each Stage To Return To The Home Position. It Should Be Possible To Compare And Analyze The Virtual Pre- And Post-operative Positions. Apart From The Osteotomy Wizard, The User Should Be Able To Plan Resections By Means Of Various ‘cut’ Tools (planar Cut, Etc). The ‘soft Tissue’ Feature Can Assist The User In Assessing A Possible Outcome By Using A Biomechanical Model. The Result Is To Be Visualized In 3d As A Computer Animation. 4. Cloud-based Communication Platform An Online Platform To Upload And Share Software Project Files With Different Users, Allowing Easy Navigation In The Medical Images And 3d Files As Well As Basic Line Drawings, Measurements, And Annotations. The Following Should Be Possible: • Upload A Case And Share With Different Collaborators • View Cases In The 3d Viewer Within The Browser O 3d View Manipulation O Image View (contrast Change, Multiplanar Reconstruction, Enlarging View And More) O Custom Views O Indication Tools O Measurement Tools O Section Tool O Fly-through Tool To View Inside A Structure Along The Centerline • Case Comments • Case Management • Institution Account Management • User Management 4.1 Automatic Segmentation Capabilities Software Package Should Have Complimentary Access To Ai-enabled Automatic Segmentation Algorithms That Were Designed To Perform Segmentation Without Human Intervention At The Initial Stage: • Cmf Cbct Segmentation • Cmf Ct Segmentation • Heart Ct Segmentation • Knee Ct Segmentation • Knee Mri Segmentation • Shoulder Ct Segmentation • Hip Ct Segmentation • Torso Ct Segmentation • Ankle Ct Segmentation • Bone Ct Segmentation Training: - Includes Training For At Least 4 Faculty Members / Staff. - Training Period Is 1 Full Day High-end Desktop Pc Item Specifications Processor 13th Generation Core™ I7-13700kf Processor (e-cores Up To 4.20 Ghz P-cores Up To 5.30 Ghz) Operating System: Latest Proprietary Operating System Graphic Card: 16gb Gddr6x Memory: 32 Gb Ddr5-5200mhz (udimm) - (2 X 8 Gb) Storage: 512 Gb Ssd M.2 2280 Pcie Gen4 Performance Tlc Cooling System: 150w 120mm Air Cooling + 1 X Rear + 3 X Front + 2 X Top With Argb Fan Pointing Device: Usb Optical Mouse Keyboard: Usb, Calliope, Black - English (us) Wifi Wireless Lan Adapters Wi-fi 6e 2x2 Ax & Bluetooth® 5.1 Or Above Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Desktop Pcs For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 4 1 Units 1 Unit High Speed 3d Printer Item Specifications Technology: Fused Deposition Modelling (fdm) / Fused Filament Fabrication (fff) Product Dimensions: 355x355x482mm Package Dimensions: 428x428x567mm Net Weight: 12.4kg Gross Weight: 16kg Display Screen: 4.3" Color Touch Screen Rated Input Voltage 100-0240v~, 50/60hz Output Voltage: 24vdc Rated Power: 350w Printing Technology: Fdm Build Volume: 220x220x250mm Printing Accuracy: 100mm+-0.1mm Layer Height: 0.1-0.35mm Typical Printing Speed 300mm/s Max. Printing Speed: 600mm/s Acceleration: 20000mm/s2 Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm (standard) Nozzle Temperature: 300c Build Surface: Pei Flexible Build Dimensions: 139.76" X 139.76" X 188.98" Inclusions: Industrial-grade Adjustable Shelves 4 Layers (only 1 Shelf For The 4 Units) English Manual Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pcs For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 3 1 Units Unit Unit Multi-color Fdm 3d Printer Item Specifications Technology: Fused Deposition Modelling (fdm) / Fused Filament Fabrication (fff) Build Volume (w×d×h) 256 × 256 × 256 Mm³ Nozzle 0.4 Mm Hardened Steel Included Hotend All-metal Max Hot End Temperature 300 ℃ Filament Diameter 1.75 Mm Supported Filament Pla, Petg, Tpu, Abs, Asa, Pva, Pet Ideal For Pa, Pc, Carbon/ Glass Fiber Reinforced Polymer Build Plate Surface Bambu Cool Plate, Bambu Engineering Plate Included Max Build Plate Temperature 110℃@220v, 120℃@110v Max Speed Of Tool Head 500 Mm/s Max Acceleration Of Tool Head 20 M/s² Physical Dimensions 389 × 389 × 457 Mm³, Package Size 480 × 480 × 590 Mm³, Net Weight 14.13 Kg, Gross Weight(ams Included) 22.3 Kg Electrical Requirements 100-240 Vac, 50/60 H, 1000w@220v, 350w@110v Inclusions: Industrial-grade Adjustable Shelves 4 Layers Layers (only 1 Shelf For The 3 Units) English Manual Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 60-seat Premium 3d Cad Software With Initial 4 Years Subscription Services Item Specifications - Premium (3d Cad Software) - Simulation Premium (fea Tools) - Flow Simulation (cfd Tools) - Motion (kinematics Analysis) - Plastics (part And Mold Filling Analysis) - Sustainability (environmental Impact Tools) - Electrical Professional (electrical Systems Design Tools) - Model Base Definition (define, Organize, And Publish 3d Pmi) - Visualize (develop Rich, Photo-quality Content) - Computer Aided Manufacturing Supports For Education Edition Includes: - Complete Curriculum, Including A Teacher Guide And Student Guide That Makes Teaching Easier At Every Level. - Extensive Interactive Courseware Projects - Access To Online Educational Community, Plus Our Library Of Articles, Tutorials, Product Resources, And More. - Free Access To Customer Portal. - Free Updates And Upgrade To Latest Version. - Free Installation Assistance. Training: - Includes Training For 5 Faculty Members / Staff. - Training Period Is 4 Full Days - Lunch Is Included Terms And Conditions: 1. Warranty: Technical Support During Subscription 2. Delivery Period: Within 90 Working Days 3. All Prices Quoted Are Subject To Change W/o Prior Notice 1 Unit Professional Desktop Fused Deposition Modelling/fused Filament Fabrication 3d Printer Item Specifications Technology: Fused Deposition Modelling (fdm) / Fused Filament Fabrication (fff) Dimensions Build Volume 330 X 240 X 300 Mm (13 X 9.4 X 11.8 Inches) Assembled Dimensions: W 495 X D 585 X H 780 Mm (w 19.5 X D 23 X H 30.7 Inches) Print Technology: Fused Deposition Modeling (fdm) Compatible Filament Diameter: 2.85 Mm Weight: 29.1 Kg (64.2 Lbs) Maximum Power Output: 500 W Printer Properties Layer Resolution: 0.25 Mm Nozzle: 150 - 60 Micron 0.4 Mm Nozzle: 200 - 20 Micron 0.6 Mm Nozzle: 300 - 20 Micron 0.8 Mm Nozzle: 600 - 20 Micron Xyz Resolution: 6.9, 6.9, 2.5 Micron Feeder Type: Dual-geared Feeder, Reinforced For Composite Materials Display: 4.7-inch (11.9 Cm) Color Touchscreen Print Core Replacement: Swappable Print Cores Print Head: Dual Extrusion Print Head With An Auto-nozzle Lifting System, Swappable Print Cores, And Flood Detection. Nozzle Diameters: 0.25 Mm, 0.4 Mm, 0.6 Mm, 0.8 Mm Operation Parameters Nozzle Temperature 180 - 280 °c Nozzle Heat-up Time: < 2 Minutes Operating Sound: < 51 Dba Build Plate Leveling: Advanced Active Leveling Build Plate: Glass Build Plate Build Plate Heat-up Time: < 5 Minutes (from 20 To 60 °c) Operating Ambient Temperature: 15 - 32 °c (59 - 90 °f) Non-operating Temperature: 0 - 32 °c (32 - 90 °f) Ecosystem: Supplied Free Software - Appropriate Slicing Software - Appropriate Printer Management Software Essential Software – Enterprise-grade Online Software Tools Supported Os: All Leading Industry Os Plugin Integration: All Leading Professional Cad Software Supported File Types: Stl, Obj, X3d, 3mf, Bmp, Gif, Jpg, Png Printable Formats: G, Gcode, Gcode.gz, Ufp File Transfter: Wi-fi (2.4 Ghz), Ethernet, Usb Safety And Compliance Certification: Ce, Fcc, Vpat, Rohs, Reach, Cb, Bis, Kc, Pse, Rcm, Srrc, Mic, Ncc, Safe Unattended Professional Use Security Certification: Iso/iec 27001 Certified (https://support.makerbot.com/s/article/1667411337398) Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Food 3d Printer Item Specifications Single Syringe With 100 Cubic Centimeters Volume (cc) Capacity Print Area: Up To 220 X 195 X 170 Mm Syringe And Printbed Heating Automatic Calibration Dimensions: 510 X 420 X 700 Mm Smarter Control And Monitoring With Touch Screen And Webcam. The Touchscreen Is Intuitively Designed For An Excellent User Experience. The Webcam Gives You The Freedom To Keep An Eye On Your Print Job If You Need To Step Away Motorized Syringe For More Accurate And Controlled Paste Flow Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Printed Circuit Board (pcb) Printer Item Specifications Printing Specifications Minimum Trace Width 0.2 Mm Minimum Passive Size 1005 Minimum Pin-to-pin Pitch (conductive Ink) 0.8 Mml Minimum Pin-to-pin Pitch (solder Paste) 0.5 Mml Resistivity 12 Mω/sq @ 70 Um Height Substrate Material Fr4 Maximum Board Thickness 3 Mm Soldering Specifications Solder Paste Alloy Sn42/bi57.6/ag0.4 Solder Wire Alloy Snbiag1 Soldering Iron Temperature 180-210 °c Print Bed Print Area 135 X 113.5 Mm Max. Heated Bed Temperature 240 °c Heated Bed Ramp Rate ~2°c/s Footprint Dimensions: 390 X 257 X 207 Mm (l X W X H) Weight 7 Kg Computing Requirements Compatible Operating Systems Latest Proprietary Operating System Compatible File Format Gerber Connection Type Wired Usb Certification En 61326-1:2013 Emc Requirements Iec 61010-1 Safety Requirements Ce Marking Affixed To The Printers Delivered To European Customers Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 1 Unit T Computer Numerical Control (cnc) Router Item Specifications X Axis Travel 23.81" (605mm) Y Axis Travel = 47.63" (1210mm) Z Axis Travel 3.937" (100mm) Table Work Area = 28.4" X 61" Electro Spindle 800w (1hp) Includes Collets 1/4" & 1/8" Spindle Speed 0-24,000 Rpm Rapid Feed Rate 150 Ipm (3.81 Mpm) Precision Linear Guideway X/y/z Precision Ball Screw X/y/z Ball Screw Diameter 16mm Resolution +/- .00589" (0.15mm) Power Requirements 115v, 50~60hz, 13a, 1-phase (canada 220v, 7a) Working Table High Rigidity Aluminum Extrusion Gantry Bridge High Rigidity Aluminum Extrusion Gantry Supports Aluminum Billet Machined Max Gantry Clearance 5 1/2" (139.0mm) Gantry Clearance Above Spoil Brds 4 1/2" (114.3mm) Machine Base All Welded Steel Frame Machine Dimensions = 62"l X 35"w X 28"h Shipping Dimensions = 65" X 38" X 21" Machine Weight = 242 Lbs Tool Touch Off Included Controller Richauto B11 Dsp Cnc Motion Control System Usb Port For Easy File Transfer Inclusions: English Manual Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair 1 1 Unit Unit 3d Scanner Item Specifications Scanner Type: Handheld With Built-in Touchscreen Interface Description: Hand-held 3d Scanner Meant To Capture (from 30cm To 10m In Length). With Built-in Touchscreen For Ease-of-use During Scanning. 3d Point Accuracy : 0.1 Mm Or Better 3d Resolution : 0.6 Mm Or Better Depth Of View : At Least 55-95 Cm Field Of View: At Least 280 X 360 Mm (min.) To 490 X 650 Mm (max.) 3d Light Source: White Led Texture Resolution: 2.3 Mp Frame Rate : 35 Fps Or Better Data Acquisition Speed : At Least 3m Points /sec Multi Core Processing: Yes 3d Formats: Obj, Ply, Stl, Etc. Interface: Built In Touchscreen - 4 Inches Or Bigger Tracking Modes: Geometry, Markers, Texture Capable Of Scanning: Black Surfaces, Glossy Objects, Sharp Edges, Human Hair Dimensions: At Least 165 × 85 × 274 Mm Or Equivalent Software: Include License Operating Software That Can Fill Holes, Simplify The Mesh, Apply Texture. - Calibration Board - Magnetic Marker - Usb Cable - Appropriate Software - Carry Case Inclusions: English Manual Safety Box With Security Lock (using Key And Pin Code) Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service High-end Laptop Item Specifications Operating System: Latest Proprietary Operating System Processor: Core I7-10750h Processor 2.60 Ghz 12m Cache, Up To 5.00 Ghz Graphics: Gtx 1660 Ti 6gb Gddr6 Vram Memory: 16gb Ddr4 Up To 3200mhz Sdram Support Up To 48gb Storage: 1tb Ssd Display: 15.6-inch Full Hd 12 Months Warranty For Parts And Service Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair 1 1 1 Unit Unit Unit Large Format Printer And Cutter Item Specifications Printing Method: Piezo Ink-jet Method Width: 11.7 To 54 In. (297 To 1,371 Mm) Thickness: Max. 39.3 Ml (1.0 Mm) With Liner, For Printing Max. 15.7 Ml (0.4 Mm) With Liner And 8.6 Ml (0.22 Mm) Without Liner, For Cutting Media Roll Outer Diameter: Max. 9.8 In. (250 Mm) Media Roll Weight: Max. 77 Lb. (35 Kg) Media Core Diameter: 3 In. (76.2 Mm) Or 2 In. (50.8 Mm) Printing/cutting Width (*1): Max. 52.9 In. (1,346 Mm) Printing Resolution (dots Per Inch): Max. 1,200 Dpi Cutting Speed:0.39 To 11.8 In/s (10 To 300 Mm/s) Blade Force (*2): 30 To 500 Gf Software Resolution (when Cutting): 0.98 Ml/step (0.025 Mm/step) Dimensions: At Least 103.7 In. X 29.5 In. X 52.0 In. (2,632 Mm X 748 Mm X 1,320 Mm) Media Heating System (*3): Print Heater Set Temperature: 86 To 113 (°f 30 To 45 °c) Dryer Set Temperature: 86 To 131 °f (30 To 55 °c) Connectivity: Ethernet Power-saving Function: Automatic Sleep Feature Rated Input: 100-120/220-240 Va.c. 50/60 Hz 8.0/4.1 A 8 Liters Ink (cmyk) - 1l Per Color 1 Pc Cleaning Solution 1 Pc Avr 2kva 1 Rolls Generic Sticker Dedicated Stands, Power Cord, Media Holders, Replacement Blade For Separating Knife, Drain Bottle, User's Manual, Software Inclusions: English Manual Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service Desktop Pc For Cad Modelling Item Specifications - 3.4 Ghz Eight-core Processor # Of Cpu Cores: 8 # Of Threads: 16 Max. Boost Clock: Up To 4.6ghz Base Clock: 3.4ghz L1 Cache: 512kb L2 Cache: 4mb L3 Cache: 32mb Default Tdp: 65w Processor Technology For Cpu Cores: Tsmc 7nm Finfet Unlocked For Overclocking: Yes Cpu Socket: Am4 Socket Count: 1p Thermal Solution (pib): Not Included Max. Operating Temperature (tjmax): 90°c - B550m Wifi Motherboard Chipset: B550 Memory: 4 X Dimm, Max. 128gb, Ddr4 4600(o.c)/ 4400(o.c)/ 4266(o.c.)/4133(o.c.)/4000(o.c.)/ 3866(o.c.)/733(o.c.)/3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/2800/2666/2400/ 2133 Mhz Un-buffered Memory * 4 X Dimm, Max. 128gb, Ddr4 4800(o.c.)/ 4600(o.c)/ 4466(o.c.)/4400(o.c)/4266(o.c.)/ 4133(o.c.)/4000(o.c.)/ 3866(o.c.)/3733(o.c.)/ 3600(o.c.)/ 3466(o.c.)/ 3333(o.c.)/3200/3000/ 2800/2666/2400/2133 Mhz Un-buffered Memory * Dual Channel Memory Architecture Ecc Memory (ecc Mode) Support Varies By Cpu. Graphic 1 X Displayport 1.2 1 X Hdmi 2.1(4k@60hz) *graphics Specifications May Vary Between Cpu Types. Expansion Slots Desktop Processors: 1 X Pcie 4.0 X16 (x16 Mode) G-series Desktop Processors: 1 X Pcie 3.0 X16 (x16 Mode) B550 Chipset: 1 X Pcie 3.0 X16 (x4 Mode) *1 1 X Pcie 3.0 X1 *1 * Support Pcie Bifurcation For Raid On Cpu Function. Storage Total Supports 2 X M.2 Slot(s) And 4 X Sata 6gb/s Ports Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 4.0 X4 And Sata Modes) Storage Devices Support Desktop Processors: 1 X M.2_1 Socket 3, With M Key, Type 2242/2260/2280 (pcie 3.0 X4 And Sata Modes) Storage Devices Support B550 Chipset : 1 X M.2_2 Socket 3, With M Key, Type 2242/2260/2280/22110(pcie 3.0 X4 And Sata Modes) Storage Devices Support 4 X Sata 6gb/s Port(s), Support Raid 0, 1, 10 Lan: 2.5gb Ethernet Wireless Data Network: Wi-fi 6 Ax200 2x2 Wi-fi 6 (802.11 A/b/g/n/ac/ax) Support 1024qam/ofdma/mu-mimo Supports Up To 2.4gbps Max Data Rate Supports Dual Band Frequency 2.4/5 Ghz Supports Channel Bandwidth: Ht20/ht40/ht80/ht160 Supports Pcie Interface Bluetooth: Bluetooth V5.1* *bt 5.1 Function Will Be Ready In 10 Build 19041 Or Later. Audio: Alc S1200a 7.1 Surround Sound High Definition Audio Codec - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Up To 24-bit/192khz Playback Audio Feature : - Exclusive Dts Custom For Gaming Headsets. - Optical S/pdif Out Port(s) At Back Panel - Audio Cover - Audio Shielding - Dedicated Audio Pcb Layers - Premium Japanese Audio Capacitors Usb Ports Rear Usb Port ( Total 8 ) 2 X Usb 3.2 Gen 2 Port(s)(1 X Type-a +1 X Usb Type-c®) 4 X Usb 3.2 Gen 1 Port(s)(4 X Type-a) 2 X Usb 2.0 Port(s)(2 X Type-a) Front Usb Port ( Total 6 ) 2 X Usb 3.2 Gen 1 Port(s)(2 X Type-a) 4 X Usb 2.0 Port(s)(4 X Type-a) Software Features: Appropriate Software Specia Features: Protection Back I/o Ports 1 X Ps/2 Keyboard/mouse Combo Port(s) 1 X Displayport 1 X Hdmi 1 X Lan (2.5g) Port(s) 2 X Usb 3.2 Gen 2 (teal Blue) (1 X Type-a+1 X Usb Type-c®) 2 X Usb 2.0 4 X Usb 3.2 Gen 1 (blue) (one Port Can Be Switched To Usb Bios Recovery) 1 X Optical S/pdif Out 5 X Audio Jack(s) 1 X Bios Recovery Button(s) 1 X Wi-fi Module Internal I/o Ports 1 X Cpu Fan Connector(s) 1 X Cpu Opt Fan Connector(s) 2 X Chassis Fan Connector(s) 2 X Rgb Strip Headers 1 X Addressable Gen 2 Header(s) 1 X Usb 3.2 Gen 1(up To 5gbps) Connector(s) Support(s) Additional 2 Usb 3.2 Gen 1 Port(s) 2 X Usb 2.0 Connector(s) Support(s) Additional 4 Usb 2.0 Port(s) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X M.2 Socket 3 With M Key, Type 2242/2260/2280/22110 Storage Devices Support (sata Mode & X4 Pcie Mode) 1 X Spi Tpm Header 4 X Sata 6gb/s Connector(s) 1 X 24-pin Eatx Power Connector(s) 1 X 8-pin Eatx 12v Power Connectors 1 X Front Panel Audio Connector(s) (aafp) 1 X Clear Cmos Jumper(s) 1 X System Panel Connector 1 X Com Port Header 1 X Speaker Connector Accessories User´s Manual I/o Shield 2 X Sata 6gb/s Cable(s) 1 X Supporting Dvd 1 X Gaming Sticker 1 X Certification Card(s) 1 X Wi-fi Moving Antenna 1 X M.2 Ssd Screw Package(s) 1 X M.2 Rubber Package(s) Bios: 256 Mb Flash Rom, Uefi Ami Bios Operating System: Latest Proprietary Operating System Form Factor: Matx Form Factor 9.6 Inch X 9.6 Inch ( 24.4 Cm X 24.4 Cm ) Note: *1 Pciex16_2 Will Run X2 Mode When Pciex1 Is Used. - 16gb Ddr4 3600mhz Ram Capacity: 16gb (2 X 8gb) Type: 288-pin Ddr4 Sdram Speed: Ddr4 3600 (pc4 28800) Cas Latency: 18 Timing: 18-22-22-42 Voltage: 1.35v Ecc: No Buffered/registered: Unbuffered Multi-channel Kit: Dual Channel Kit Chipset: Xmp 2.0 Color Black Heat Spreader Yes - 500gb Ssd Card Capacity: 500gb Form Factor: M.2 2280 Connector: M.2 Sequential Read Performance: 3500mb/s Sequential Write Performance: 2300mb/s Random Read: 360k Iops Random Write: 390k Iops Interface: Pcie Gen3 X4, Nvme V1.4 Warranty: 5-year Limited Warranty Endurance (tbw): 300 Dimensions (l X W X H): 80mm X 22mm X 2.38mm Weight: 6.5gms Operating Temperature: 0°c To 70°c Non-operating Temperature: -40°c To 85°c Certifications: Bsmi, Ices-003/nmb-003, Ce, Fcc, Kc, Maghreb, Rcm, Ukca, Vcci, Cb-scheme, Tuv, Ul - Video Card Bus Standard: Pci Express 4.0 Opengl: Opengl®4.6 Video Memory: 8gb Gddr6 Engine Clock: Oc Mode - 1740 Mhz (boost Clock) Gaming Mode - 1710 Mhz (boost Clock) Cuda Core: 4864 Memory Speed: 14 Gbps Memory Interface: 256-bit Resolution: Digital Max Resolution 7680 X 4320 Interface: Yes X 2 (native Hdmi 2.1) Yes X 3 (native Displayport 1.4a) Hdcp Support Yes (2.3) - Cpu Case Type: Atx Case Drive Space: 5:25" - 0 Drive Space: 3.25" - 2 Drive Space: 2.5" - 2 Main Board: Atx Power Supply: Ps2 Expansion Slot: 7 Slots Case Dimension: 400x 185 X 440mm Fan Capacity Front: 2 X 12cm Rear: 1x12cm Top: 2 X 12cm Measurement: 1080pcs / 40' Hq Maximum Compatibility: Vga Card Length: 380mm | Cpu Cooler: 160mm | M/b: 305x244mm - Fsp 750w Gold Power Supply Unit - Monitor: 21.5" Wide Black Fhd Led Monitor (vga, Hdmi) - Mouse And Keyboard - Desktop Computer Desk With Metal Frame And Wooden Top - Swivel Chair Graphing Software Item Specifications - Engineering Graphing Software - Capable Of The Ff: - Linear And Polynomial Fitting - Nonlinear Fitting - Peak Analysis - Descriptive Statistics - Hypothesis Testing - Nonparametric Tests - Multivariate Analysis - Power And Sample Size - Roc Curve - Signal Analysis (smoothing And Filtering, Fast Fourier Transform) - Matematics (simple Math Operations, Interpolation, Extrapolation, Area Calculation) - Graphing (2d Graphing, 3d Graphing) - Curve Fitting - Graph Customization - Data Processing - Etc 1 Unit Digital Embroidery Item Specifications Can Embroider Using Digital Designs Basic Features Accessory Storage Yes Adjustable Screen Brightness No Automatic Thread Cutter Yes Built-in Languages Yes Built-in Memory Yes Included Accessory Feet Button Fitting Foot, Zipper Foot, Overcasting Foot, Blindstich Foot, Monogramming Foot, Zigzag Foot, Embroidery Foot Needle Position Key (up/down) Yes Needle Threading System Advanced Number Of Presser Feet 8 Presser Foot Leveling Yes Quick Set Bobbin Yes Start/stop Button Yes Thread Sensor On/off No Wide Table Included No Wireless Enabled Yes Dimensions Carton Dimensions (w" X D" X H") 16.500 " X 21.000 " X 15.750 " Carton Weight (lbs) 26.700 Unit Dimensions (w" X D" X H") 7.76" X 16.50" X 12.09" Unit Weight (lbs) 15.06 Embroidering Built-in Designs 135 Built-in Embroidery Lettering Alphabet Fonts 10 Embroidery Position Marker No Maximum Embroidery Area 4" X 4" Sewing Automatic Height Adjustment (aha) No Built-in Lettering Fonts 10 Built-in Stitch Selections (stitches) 103 Button Hole Styles 10 Independent Bobbin Winding Motor No Knee Lifter No Maximum Sewing Speed (stitches Per Minute) 710 Pivot Function No Speed Control Yes Carton Contents: Zigzag Foot “j” (on Machine), Monogramming Foot “n”, Overcasting Foot “g”, Zipper Foot “i”, Blind Stitch Foot “r”, Button Fitting Foot “m”, Buttonhole Foot “a”, Embroidery Foot “q”, Needle Set, Twin Needle, Bobbin (2) (one Bobbin Is On Machine), Pre- Wound Bobbin (3) (60 Weight White Embroidery Bobbin Thread), Bobbin Clip (4), Seam Ripper, Scissors, Cleaning Brush, Eyelet Punch, Screwdriver, Disc-shaped Screwdriver, Extra Spool Pin, Spool Cap (large), Spool Cap (medium) (on Machine), Spool Cap (small), Thread Spool Insert (mini King Thread Spool), Spool Net, Bobbin Case (on Machine), Foot Controller, Embroidery Frame Set (medium), 10 Cm (h) × 10 Cm (w) (4 Inches (h) × 4 Inches (w)), Accessory Bag, Dust Cover, Operation Manual, Quick Reference Guide, Embroidery Design Guide Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Flatbed Uv Printer With Initial Consumables, And Other Peripherals Item Specifications Can Print Directly On Solid Materials Such As Woods, Plastics, Metals, Rubber, Leather, Glass, And More Printer Technology: Drop-on-demand Micro Piezo Inkjet Technology Description: Print Quality On A Wide Variety Of Solid Materials And Objects Including Abs, Alu-board, Pc, Pet, Pmma (acrylic), Ps, Pvc, Etc. Application: Prototypes, Personalised Gifts, Packaging, Souvenirs, Awards, Specialty Industrial Items As Well As Labels, Decals, Signs, Etc. Print Head: 1 Max. Media Size: At Least 483 Mm (19") X 594 Mm (23.4”) Max. Media Thickness: At Least 150 Mm (5.9") Max. Print Area: At Least 473 Mm (18,6”) X 584 Mm (23") Media Drying System: Long-life Led-uv Curing Lamp Vacuum System: Standard Integrated - Electronically Adjustable Hold-down Strength No. Of Ink Slot: 6 Ink Type: Led-uv Ink Ink Colors: Kcmy, White+ Varnish Print Resolutions: 1440/1080/720dpi Interface: Ethernet Power Supply: Ac 100-240v - 50/60hz±1hz Power Consumption Operating Status: 300w Or Less Machine Measurements (w) X (d) X (h) : 1188 X 1533.6 X 604.3 Mm (46.8"x 60.4" X 23.8") Rotary Cmyk Uv Ink User Manual Avr Software Inclusions: Consumables: 1 Set Cmyk + White And Varnish Peripherals Or Machine Parts: Vacuum Table, Led Pointer, Front Cover, Plus Rotary Attachment Machine Software English Manual Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Garment / T-shirt Printer Prints Directly On Fabrics And Textiles Specifications: Printing Technology: Advanced Inkjet Technology Nozzle Configuration : At Least 3,200 Nozzles Maximum Print Resolution: 2400 X 1200 Dpi Print Speed: Production (2 Pass), For Fabric: Up To 62sec / 21m2 (600 X 1200 Dpi) Production (7 Pass): For Fabric & Rigid: Up To 208sec / 7.5m2 (1200 X 1200 Dpi) Production (12 Pass), For Fabric & Rigid: Up To 350sec / 4.5m2 (2400 X 1200 Dpi) Ink Colours: Cyan, Magenta, Yellow, Black Ink Capacity: 140ml Dimensions: 97cm 81.1cm X 24.5cm Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Co2 Laser Cutter / Engraver Item Specifications Mechanics Work Surface Area: At Least 1290 X 990 Mm Dimension: 1850 X 1500 X 1100 Mm Or Equivalent Cutting Speed: At Least 30000 Mm/min Engraving Speed: At Least 60000 Mm/min Laser Type: Co2 Laser Tube Laser Power Included: Up To 100watts Focus Lens: At Least 2.0 In Standard Resolution Ratio: At Least 0.025 Mm Repositioning Accuracy: At Least '+/- 10% Operating Humidity: 5%-80% Graphic Format Supported: Bmp,gif,jpeg,unitx,tga,tiff,plt,cdr,dwg,dxf Software Compatibility: Coreldraw, Photoshop, Autocad, Tajima , Cam/cad Cooling Method: Water Cooling (chiller Included) Materials Compatibility: Acrylic, Wood, Fabric, Cardboard, Paper, Synthetic Granite, Natural Granite, Leather, Foam Board, Glass Extendable Size: Front And Back Of Laser Machine Can Be Opened Suitable For Super Length Material Process Power Requirements: 220v, 50hz/60hz Package Inclusions: 1 Unit Spare Lens 2 Units Spare Mirror 1 Unit Air Compressor 1 Unit Chiller 1 Set Starter Consumable Other Inclusions: English Manual Desktop Computer Desk With Metal Frame And Wooden Top Swivel Chair Cabinet For Accessories, Supplies And Materials Certificate Of Authority To Sell From The Manufacturer Or Local Distributor/reseller. Training Certificate Provided By Manufacturer To Certified Trainer. After-sales Support Certificate Issued By The Manufacturer. Parts Availability Certificate Issued By The Manufacturer. On-site Training And Installation 12 Months Warranty For Parts And Service 1 Unit Duplicator Item Specifications A3 Size Paper B4 Size Output Master Making Method: Thermal Digital Master Making Interval: 23 Seconds (a4.100%) Resolution: Scan (input) Resolution: 300x360 Dpi Print (output) Resolution: 300x600 Dpi Scanning Method: Adf Scanner Document Feeder Document Weight: 45-210gsm 17-34lbs (bond) Document Capacity: 1 Sheet Printing Method: Stencil Print Document Type: Sheet, Book (max) Document Size: Max: 297mmx420mm Min: 100x148mm Image Area: Max: 250x355mm Feeding Capacity: 1,300sheets (64gsm) Stacker Capacity: 1,300sheets (64gsm) Paper Size: Max: 297x420mm Min: 100x148mm Paper Weight: 42-210gsm Print Speed: 60ppm/130ppm (3steps) Zoom: 50-200% Preset Reduction/enlargement: 57, 70, 81, 86, 94, 115, 122, 141, 173% Margin: X94% Registration Adjustment: Vertical ±15mm And Horizontal ±15mm Other Function: Ink Save Mode, Multiple Exposure (2, 4, 8, & 16-up, 2in1), Confidential Safeguard, 90, 180 Degree Rotation, Master Re-make (save The Data From Last Master Making), Repeat Counter, Pre-print, Interval Print (2 Mode, By Time Specified), Print Per Set/prints Per Document Program, Energy Save Mode(lcd / Back Light Turned Off /sleep Led), Ink Replenishing Mode, Auto- Reset, Online Print (usb 2.0), Double Feed Detection. Power Source: 100-240v, 50/60hz, 1.6-0.8a/ Max Speed Printing - Max. 135wenergy Save Mode -min. 10.2w Dimensions: 1,290mm X 620mm X 1165mm Inclusions: • Price Is Vat Inc • Including The Delivery Fee • Free Lifetime Service Warranty • Ink Starter Set • 1 Year Standard Warranty On Parts • Desktop Computer Desk With Metal Frame And Wooden Top • Swivel Chair • Cabinet For Accessories, Supplies And Materials Should Also Include Additional: One (1) Black Ink: (600 Cc) 10,000-15,000 Copies One (1) Master Stencil Roll: (200 Cuts/roll) Per Cut Yield 10,000 - 15,000 Copies