Scanning Tenders

Details: Description Provision Of (1) Photocopying Services Black And White; No Minimum Volume Requirements; Design: Console Type; Copy Speed: 45-60 Copies Per Minute (4 Size) With Pc Connectivity With Network Scanning And Printing Capability; Paper Size: Max-a3 Min Asr; Continuous Copy: Max-99 Copes; Resolution: Max-600 Dpi; Copy Paper: Regular Or Special; Paper Supply: 4 Paper Trays; Power Requirement: 220-240 Vag Lot; 12 Months; P360,000.00

Details: Nhs England (nhse) Are Seeking To Extend The Existing Dps To Support The National Approach To The Digitisation Of Lloyd George Records In Gp Practices. Corresponding Ted Notice Reference Is 2020/s 027-063375 Published On 7 August 2020. The National Commercial & Procurement Hub (on Behalf Of Nhse) Is Seeking Suitably Experienced And Qualified Suppliers To Join The Dynamic Purchasing System (dps) As The Vehicle For The Procurement Of Digitisation Services For Nhs Integrated Care Boards (icb's), And Other Contracting Authorities Identified On A Regional Or Local Basis. The Dps Will Be Divided Into Three Categories (lots): Lot 1 Scanning Services Lot 2 Integration With Foundation Clinical System Lot 3 Scanning Services/integration With Foundation Clinical System (being The Aggregate Subject-matter Of Lots 1 And 2). Suppliers Interested In Performing The Services Covered By Both Lots 1 And 2, May Apply For Lot 3 In Addition To Applying For Both Lots 1 And 2. The Awarding Of Specific Contracts Will Be Via Invitation To Tender To Suppliers Listed On The Established Dps. Contracting Authorities Will Be Able To Use The Dps To Award Specific Contracts By Inviting Suppliers Listed To Compete Via An Itt. Access To The Procurement Documents Is Restricted. Further Information Can Be Obtained At Https://atamis-1928.my.site.com/s/welcome Dps For Digitisation Of Lloyd George Records Reference C299199 Additional Information Can Be Obtained From The Above-mentioned Address Commercial.procurementhub@nhs.net Tenders Or Requests To Participate Must Be Submitted Electronically Via Https://atamis-1928.my.site.com/s/welcome

Details: Title: Sorteringsanlæg - Bygning_genudbud description: Ved Nærværende Udbud Ønsker Ordregiver At Indhente Tilbud På Sorteringsanlægget Der Omfatter En Modtagerhal, Proceshal Og En Teknikbygning. Yderligere Er Det 2 Overdækkede Områder For Hhv. Bal-lelager Og Containerplads. Formålet Med Etableringen Af Sorteringsanlægget Er At Adskille Det Genanvendelige Materiale I Det Restaffald Der Indsamles Fra Husstandene I Arcs Opland. Sorteringsanlægget Vil Blive Baseret På Nir Scanning Af Affald, En Ballistisk Separator, Magnetisk Sortering Og En Hvirvelstrøms Separator. Anlægget Automatiseres I Størst Muligt Omfang. Anlægget Designes Fleksibelt Med Hensyn Til Efterfølgende Udvidelse, Hvis Der Senere Ønskes Sortering Af Andre Fraktioner.

Details: Announcement of competition: dynamic purchasing scheme consulting services within information security. This scheme shall cover assistance and advice in the field of information security. it includes, but is not limited to, the following sub-areas: • it and information security, including consulting, management system / internal control, privacy, compliance with legal requirements, etc. • risk assessments and management • security-specific testing, including penetration testing, vulnerability scanning, etc. • security architecture .Suppliers shall briefly document which listed subject areas they have competence in within the area. Information about subcontracts This procurement is divided into subcontracts: no Languages such as offers or requests for participation can be submitted to Norsk Eligibility Criteria : qualification requirements overview and brief description of qualification requirements: see tender documentsminimum requirements: see tender documentscontract terms

Details: Title: Provision Of Enterprise Trurisk Platform (qualys Guard) description: The Authority Seeks An Enterprise Trurisk Platform (qualys Guard) Authorised Seller / Reseller Who Can Provide The Enterprise Trurisk Platform (qualys Guard) For The Authority. The Nta Intends To Enter A Contract For The Provision Of Enterprise Trurisk Platform (qualys Guard) Licence And Support For The Following Requirements: • Q-p-vmdr - Vulnerability Management Module (vmdr); • Q-p-totalcloud - Cloud Module (total Cloud); • Q- E-pub-pc Qualys Compliance Module; • Q-e-pub-was-qualys Web Application Scanning; • Q-p-csam-qualys Cyber Security Asset Management; And • Qualys Pci Module. The Estimated Value For The Duration Of Contract Is €470,000. However, The Authority Retains The Right To Spend A Maximum Value Of €733,200

Details: Title: A Single Operator Framework Agreement For A Print Management Software Solution For University Of Galway description: University Of Galway Is Seeking A Print Management Software Solution That Offers Release Printing, Direct Printing, Wifi Printing, Scanning, Email Printing, Billing Functionality And Reporting. The Scope Also Includes Ongoing Support And Maintenance. The University’s Initial Requirement Is For An On-premises Solution With An Intention To Move To Cloud Over The Lifetime Of The Framework. University Of Galway Is In Contract With A Separate Service Provider For The Managed Print Service And Currently Have Over 100 Konica Minolta Mfps And 21 Direct Printers In Place. The Print Management Software Solution Being Sought Must Allow Users To Authenticate, Pay And Release Print Jobs On The Existing Konica Minolta Fleet Using Their Campus Cards. Payment For Print Jobs Will Either Be From Print Credit The User Purchases Through An Online Payment Provider, Or By Charging A University Cost Centre.

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: innovators At The Nasa Langley Research Center, In Collaboration With Analytical Mechanics Associates, Have Developed An Automated Ultrasonic Scanning System For In-situ Cure Monitoring And Defect Detection Of Composites In An Autoclave Or An Oven. This Non-destructive Evaluation System Is Based On An Ultrasonic Contact Scanner Enclosed In An Insulated Vessel Placed Inside Of The Autoclave. The System Actively Scans For Any Defects That May Form In Composites During The Cure Process And Tracks Movement Of Defects Originating During Layup Or Cure. Typically, Non-destructive Evaluation Of Composites, By Ultrasound Or Other Means, Is Conducted Either Before Or After The Cure Process, But Many Defects Vanish And Form During Cure. Nasa's In-situ Cure Monitoring System, By Contrast, Provides Real-time Monitoring Of Defect Formation And Movement During Cure. This Not Only Offers A Better Understanding Of Defect Sources And Sinks, But Also The Ability To More Accurately Validate Process Models For The Prediction Of Cure Process Defects. nasa's System For In-situ Defect (e.g., Porosity, Fiber Waviness) Detection In Composites During Cure Consists Of An Ultrasonic Portable Automated C-scan System With An Attached Ultrasonic Contact Probe. This Scanner Is Placed Inside Of An Insulated Vessel That Protects The Temperature-sensitive Components Of The Scanner. A Liquid Nitrogen Cooling Systems Keeps The Interior Of The Vessel Below 38°c. A Motorized X-y Raster Scanner Is Mounted Inside An Unsealed Cooling Container Made Of Porous Insulation Boards With A Cantilever Scanning Arm Protruding Out Of The Cooling Container Through A Slot. The Cooling Container That Houses The X-y Raster Scanner Is Periodically Cooled Using A Liquid Nitrogen (ln2) Delivery System. Flexible Bellows In The Slot Opening Of The Box Minimize Heat Transfer Between The Box And The External Autoclave Environment. The Box And Scanning Arm Are Located On A Precision Cast Tool Plate. A Thin Layer Of Ultrasonic Couplant Is Placed Between The Transducer And The Tool Plate. The Composite Parts Are Vacuum Bagged On The Other Side Of The Tool Plate And Inspected. The Scanning System Inside Of The Vessel Is Connected To The Controller Outside Of The Autoclave. The System Can Provide A-scan, B-scan, And C-scan Images Of The Composite Panel At Multiple Times During The Cure Process. The In-situ System Provides Higher Resolution Data To Find, Characterize, And Track Defects During Cure Better Than Other Cure Monitoring Techniques. In Addition, This System Also Shows The Through-thickness Location Of Any Composite Manufacturing Defects During Cure With Real-time Localization And Tracking. This Has Been Demonstrated For Both Intentionally Introduced Porosity (i.e., Trapped During Layup) As Well Processing Induced Porosity (e.g., Resulting From Uneven Pressure Distribution On A Part). The Technology Can Be Used As A Non-destructive Evaluation System When Making Composite Parts In In An Oven Or An Autoclave, Including Thermosets, Thermoplastics, Composite Laminates, High-temperature Resins, And Ceramics. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-327 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: Description 1 Unit Scanner With Adf For 44,000.00 Optimal Resolution: 1200dpi (flatbed) Max. Sacn Size: 8.5 X 20" Min. Sacn Size: 3.5 X 13" Flatbed Scan Area: 8.5 X 11.7" Automatic Duplex Scanning: Yes (3-pass) Daily Duty Cycle: Up To 1,500 Pages/day Adf Speed: 25 Ppm In Simplex And 10 Ipm In Duplex Mode 2 Units Projector For 80,000 Projector System: 3 Lcd, 3-chip Technology Native Resoultion: 1280 X 800 (wxga) Color Brightness: 3,600 - 4,000 Lumens White Brightness: 3,600 - 4,000 Lumens 15 Pcs Powerbank For 30,000 30,000 Mah Lighweight Super Fast Charging 30 Pcs 64 Gb Flash Drive For 15,000.00 For Office Use Of Pbdd Personnel. You Can Quote Per Line Item.

Details: Description 1 Unit Printer Type: (print, Scan, Copy) Printing: Piezoelectric Printhead: 180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Nozzle Configuration; 5760 X 1440 Dpi Maximum Resolution Copying: Up To 7.7 Ipm / 3.8 Ipm Copy Speed; 99 Copies Maximum From Standalone; 25- 400% Reduction/enlargement Scanning: Flatbed Colour Image Scanner; Cis Sensor Type; 1200 X 2400 Dpi Optical Resolution; Can Scan Legal Size Paper Interface: Usb 2.0; Ethernet, Wifi Ieee 802.11b/g/n, Wi-fi Direct 2 Units Laser Jet Monochrome Printer Function Print Memory/processor 64m/400mhz Control Panel Buttons (power, Cancel); Led Indicator Lights (power, Tone, Attention) Connectivity Hi-speed Usb 2.0 Port Recommended Monthly Page Volume 100 To 1,500 Pages 5 Pcs Hard Drive (1tb) Specification: Brand : External Warranty: 3 Years Dimensions: 109x 78 X 14 Mm Max. Transfer Rate: 5.0 Gbits Weight (approx) : 149g 3 Units Printer All-in-one Specifications Print Method: On-demand Inkjet (piezoelectric) Print Speed: Photo Default. 10x15 Cm 14x6''*1: Approx 69 Photo (borderless)*2 Maximum Scan Area: 216x297 Mm Scan Speed: Flatbed (black/colour) 200 Dpi: Up To 11 Sec /up To 32 Sec 1 Unit Printer 3-in 1 Specifications: Print Head/consumables Number Of Nozzles- Total 1,472 Nozzles Int Bottles/cyan- Gi-790 (pigment Ink/black), (dye- Based Ink/cyan, Magenta, Yellow) Maximum Print Resolution- 4,800 (horizontal X 1,200 (vertical) Dpi Print Speed: Document (esat/simplex)- 8.8/5 Ipm Momo/colour) Photo (4x6") (pp-201/borderless)- 60 Sec Scan Scanner Type- Flatbed (platen) Scanner Technology- Contract Image Sensor Optical Resolution- 600x1,200 Dpi Scanning Bit Depyh (input/output) Greyscale- 16 Bit/ 8 Bit Colour- 48 Bit/ 24 Bit (rgb Each 16bit/8 Bit)

Details: Details Tender Number Eri/2024/tgs/28 Department Eskom Tender Type Request For Quotation Province Gauteng Date Published 29/11/2024 Closing Date 22/01/2025 10 00 Place Where Goods, Works Or Services Are Required Hunslett & Lower Germiston-rosherville-johannesburg-1459 Special Conditions N/a Enquiries Contact Person Kushandra Krishna Email Krishnk@eskom.co.za Telephone Number 011-629-4894 Fax Number N/a Briefing Session Is There A Briefing Session? Yes Is It Compulsory? No Briefing Date And Time 02/12/2024 10 00 Briefing Venue Teams Link Attached On Itt Tender Documents Annexure K- Super Scanner.pdf Sow For The Purchase And Installation Of A Automated 3d Scanner (002) R1 (autorecovered).pdf Enabling Contract Supply Installation & Maintenance 3d Scanner 11 2024.pdf Technical Evaluation Automated 3d Scanning Facility.pdf Pricing Schedule Automated 3d Scanner (super Scanner).pdf Invitation To Tender Request For Proposal (rfp) Template New- Super Scanner.pdf