Rotation Stage Tenders

Details: Sources Sought Notice sources Sought Notice page 6 Of 6 sources Sought Notice *= Required Field sources Sought Notice page 1 Of 6 this Request For Information (rfi) Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. the Submission Of Pricing, Capabilities For Planning Purposes, And Other Market Information Is Highly Encouraged And Allowed Under This Rfi In Accordance With (iaw) Far 15.201(e). disclaimer this Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. sources Sought Description this Is Not A Solicitation Announcement. This Is A Sources Sought/rfi Only. The Purpose Of This Sources Sought/rfi Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification Relative To Naics 334510 (size Standard 1,250). Responses To This Sources Sought Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought, A Solicitation Announcement May Be Published. Responses To This Sources Sought Synopsis Are Not Considered Adequate Responses For A Solicitation Announcement. the Department Of Veterans Affairs (va), Visn 22 Network Contracting Office, Is Seeking Sources That Can Provide An Osteo Measure System That Meets The Following Salient Characteristics And Specifications For Va Loma Linda Healthcare System. **manufacture Is Sci Measures Analytical Systems, Inc.** item # description/part Number* 1 osteomeasure High Resolution Digital Video System 2 osteomeasure 0.63x Camera Adapter 3 rotatable Specimen Holder salient Characteristics system Description this Requirement Is For One Dynamic Bone Histomorphometry Digital Color Video System With The Following Specifications For The Va Approved Research Projects. this System: must Have A High-resolution Ccd Camera That Can Capture Digital Imaging And Convert Images Into Multiple Digital Output Formats. must Have A High-resolution Video Frame System That Can Grab And Mix High Resolution Video Images And Graphics And Convert This Input Video Into Vga-compatible Output That Can Be Examined In Windows Formats. must Have A High-resolution, Color-corrected C-mount Video Adapter To Adapt The Ccd Camera To The Microscope. must Have Fluorescence Mode That Is Capable Of Capturing Real-time Fluorescent Images, Including Low Light Level Images. must Have A Rotatable Stage Specimen Holder. must Have An Active Area Drawing ( Touch )-screen That Can Measure Various Parameters Of Images. must Have An Analysis System That Is Based On Standard Nomenclature Of Skeletal Elements As Specified By The American Society For Bone And Mineral Research (asbmr), And An Accompanying Measurement List To Automatically Analyze And Annotate Various Bone And Mineral Parameters As Specified By The Asbmr. the Information Identified Above Is Intended To Be Descriptive, Not Restrictive And To Indicate The Quality Of The Supplies/services That Will Be Satisfactory. It Is The Responsibility Of The Interested Source To Demonstrate To The Government That The Interested Parties Can Provide The Supplies/services That Fulfill The Required Specifications. if You Are Interested And Are Capable Of Providing The Sought Out Supplies/services, Please Provide The Requested Information As Well As The Information Indicated Below. Response To This Notice Should Include Company Name, Address, Point Of Contact, Size Of Business Pursuant To The Following Questions: (1) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service Disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc.)? (2) Is Your Company Considered Small Under The Naics Code Identified Under This Rfi? (3) Are You The Manufacturer, Distributor, Or An Equivalent Solution To The Items Being Referenced Above? (4) If You Are A Large Business, Do You Have Any Designated Distributors? If So, Please Provide Their Company Name, Telephone, Point Of Contact And Size Status (if Available). (5) If You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above Or An Equivalent Solution, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified? (6) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Nasa Sewp Or Any Other Federal Contract? If So, Please Provide The Contract Number. (7) If You Are An Fss Gsa/nac Or Nasa Sewp Contract Holder Or Other Federal Contract Holder, Are The Items/solution You Are Providing Information For Available On Your Schedule/contract? (8) Please Provide General Pricing Of Your Products/solution For Market Research Purposes. (9) Please Submit Your Capabilities In Regards To The Salient Characteristics Being Provided And Any Information Pertaining To Equal To Items To Establish Capabilities For Planning Purposes? (10) Please Review Salient Characteristics/statement Of Work (if Applicable) And Provide Feedback Or Suggestions. If None, Please Reply As N/a. (11) Please Provide Your Sam Identification Number. (12) Please Provide A List Of Detail Requirements And Drawings. *** Submissions Addressing Section (8) Should Show Clear, Compelling And Convincing*** Evidence That All Equal To Items" Meet All Required Salient Characteristics. responses To This Notice Shall Be Submitted Via Email To Carlo.manuel@va.gov. Telephone Responses Shall Not Be Accepted. Responses Must Be Received No Later Than, Monday, June 3, 2024, At 1:00 Pm Pst. If A Solicitation Is Issued It Shall Be Announced At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Request For Information. Responses To This Notice Are Not A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation.

Description: CATEGORY: Suction caing CI RKB12527KCI113 , Enclosed impeller CI RKB12527KCI151 , Wear ring Suc side CI RKB12527KCI190 , WEar ring Del side CI RKB12527KCI191 , Inter stage bush for diffuser CI RKB12527KCI358 , Inter stage bush for DWGV CI RKB12527KCI355 , Diffuser with gaide vane CI RKB12527KCI129 , Shaft sleeve del side AISI 410 RKB12527KAISI410311 , Oil seal DE and NDE rubber RKB12527KRUBBER500 , Shaft sleeve suc side AISI 410 RKB12527KAISI410310 , Bearing housing unit STD RKB12527KSTDSUBBHU27K , Set of o ring 6 stage rubber RKB12527K6RUBBERSSOR1 , Set of Tie bars with nut and washer 6 stage C 40 RKB12527K6C40SSOT1 , Rotating assly 6 stage STD FTD RKB12527K6STDFTDSUBRUA , Compression Spring Steel RKB12527KSTEEL483 , Diffuser CI RKB12527KCI128 , pump shaft 6 stage C 40 RKB12527K6C40180 , Set of Keys 6stage C 40 RKB12527K6C40SSOK1 , Stage Casing CI RKB12527KCI124 , Gland CI RKB12527KCI223 , Bearing Housing CI RKB12527KCI240 , Shaft sleeve AISI 410 SHM6532NQAISI410311 , Pump shaft C 40 SHM6532NQC40180 , Helicoil insert SS SHM6532NQSS479 , Screw for impeller AISI 410 SHM6532NQAISI410669 , Set of Oil seals Rubber SHM6532NQRUBBERSSOS1 , Bearing housing CI SHM6532NQCI240 , Internal circlip for Brg carterige Spring ST IS 4072 80C6 SHM6532NQSPST485 , Bearing cartridge DE CI SHM6532NQCI241 , Back pull out assly Q Type STD FTD SHM6532NQSTDFTDSUBBPA , Semi open impeller Q Type CI SHM6532NQCI151 , Pump Shaft C 40 DSM6532ABC40180 , Impeller Nut Bronze DSM6532ABBR330 , Impeller 1st stage CI DSM6532ABCI157 , Insert 1st stage CI DSM6532ABCI9891 , Insert 2nd stage CI DSM6532ABCI9892 , Rotating Assembly STD FTD DSM6532ABSTDFTDSUBRUA2 , Impeller 2nd stage CI DSM6532ABCI158 , Shaft sleeve DE NDE CI DSM10036CI310 , Shaft sleeve Nut Bronze DSM10036BR334 , Bearing housing Unit STD DSM10036STDSUBBHUDSM36 , Set of O Ring Rubber DSM10036RUBBERSSOR1 , Wear ring CI DSM10036CI190 , Top and Bottom Assembly CI DSM10036CISTABA , Impeller 1st stage CI DSM10036CI157 , Rotating Assembly STD FTD DSM4RMSTDFTDSUBRUA2 , Balancing Disc CI MLA100125CI464 , Balancing Ring CI MLA100125CI463 , Shaft Sleeve DS CI MLA100125CI310 , Shaft Sleeve NDS CI MLA100125CI311 , Wear Ring CI MLA100125CI190 , Inter Stage Bush CI MLA100125CI358 , Bearing Housing DE NDE M Type CI MLA100125CI240 , Set of O Ring for 5 Stage Rubber MLA1001255RUBBERSSOR1 , Pump Shaft 3 Stage C 40 MLA1001253C40180 , Suction Casing CI MLA100125CI113 , Delivery Casing CI MLA100125CI111 , Impeller Stage CI MLA100125CI151 , Set of Keys 5 Stage C 40 MLA1001255C40SSOK1 , Set of CTSK Screw 5 Stage CL4 6 MLA1001255CL46SSOC1

Details: The Unversity Of Ottawa Is Pleased To Invite Qualified Proponents To Submit A Proposal For A Slide Scanner To Perform High Resolution Automated Petrographic Analysis. General Description: An Automated Slide Scanner For Imaging And Digitising Thin Sections In Petrographic Analysis Is Required. The Slide Scanner Will Be Housed In The New Ore Deposit Petrology Laboratory (odpl) At The University Of Ottawa. The Laboratory Will Be Dedicated To The Petrological Characterization Of Ore Mineralized Rocks, With Specific Capacity In Reflected Light Characterization, Sample Visualization And Rapid Throughput For Mineralogical Screening. The Focus Will Be On Platinum-group Metal (pgm)-bearing Phases And Rocks, But The Analysis Of A Much Wider Array Of Base- And Precious Metal Mineralized Samples Will Be Possible Too. Key Capabilities Of The Odpl Will Be (1) Visualizing And Analyzing Multiple Thin Sections From The Same Hand Sample Quickly And Effectively In Looking For Pgm; (2) Image To Smaller (10s Of Nm) Length-scales In Reflected Light Optical Microscopy Than Possible Before; (3) Rapid Compositional Screening Of Pgm Assemblages; And (4) Isolating And Separating Pgm Populations From Bulk Rocks. The Slide Scanner Requested Will Be Particularly Relevant For Stages 1 And 3 Of The Workflow Outlined Above. The Automated Slide Scanner Must Be Automated, Have A Precision Scanning Stage, And Be Capable Of Imaging Multiple Thin Sections In One Sequence. The Slide Scanner Must Be Able To Operate In Transmitted And Reflected (bright Field) Light Modes. Transmitted Light, Plane Polarized, Cross Polarized And Circular Polarized Light Settings Must All Be Present, And The Polarizers Must Be Rotatable To Give A Virtual Petrographic Microscope Stage. A Range Of Objective Lens (5x, 10x, 20x Etc.) Will Facilitate High Resolution Image Collection Across Multiple Length Scales. A High Performance Microscope Camera Will Facilitate The Collection Of High Quality Color Images That Will Be Used For Subsequent Qualitative And Quantitative Analysis. A High Performance Workstation (computer System) Is Required To Handle The Large Datasets That Will Be Generated. The System Should Come With Bespoke Or Compatible Software To Support Multi-channel Image Acquisition, 2d Stitching, Multi-plane Z-stack Imaging, Quantitative Image Analysis And Machine Learning. Specifications Listed In Appendix A – Technical Specifications Compliance Form Of This Rfp Are The Mandatory Minimum Requirements For The Slide Scanner For High Resolution Automated Petrographic Analysis. Mandatory Minimum Requirements For The Slide Scanner To Perform High Resolution Automated Petrographic Analysis: 1.0 - Digital Petrographic Slide Scanner 1.1 - The Slide Scanner Must Have The Capability To Automatically Image 12 Slides Or More Continuously, With Continuous Loading Of Slides Even During Scanning Procedure 1.2 - The Imaging Station Must Be Fully Enclosed 1.3 - The Slide Scanner Must Be Able To Use Polarisation Contrast Optics And Image In Plane-polarised Light, Cross Polarised Light And Circular Polarised Light 1.4 - The Slide Scanner Must Be Able To Image In Reflected (bright Field) Light 1.5 - The Polarisers Must Be Rotatable, To Create A Virtual Rotatable Microscope Stage 1.6 - The Following Are The Minimum Slide Holder Requirements, Allowing For Standard Thin Section Dimensions Used In Optical Microscopy:

Description: This Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format At Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested. the Solicitation Number W913e524q0012 Is Being Issued As A Request For Quotation (rfq). the Associated North American Industry Classification System (naics) Code Is 334516 – Analytical Laboratory Instrument Manufacturing Was Determined To Best Represent This Requirement. the U.s. Army Engineer Research And Development Center (erdc), Cold Regions Research And Engineering Laboratory (crrel) Has A Requirement To Procure An Ice Fabric Analyzer requirement: The Requirement Includes All Items Described In The Description Of Requirement (dor) Resulting In One (1) Ice Fabric Analyzer And Shall Fulfill The Following Requirements: microscope: 50 Mm And 10 Mm Objective Lenses resolution Of 5 Um And 1 Um Respectively polarizer Filters polyaxial Led Illumination camera: 4-megapixel Camera capable Of Capturing Images At 15 Fps rgb Color motorized Stage With Rotation embedded Computer With Image Processing System For Image Acquisition And Analysis cold Capable (down To -10°c) can Image Ice Sections With Thickness 0.2 – 1 Mm case For Storage And Transportation must Be Portable universal Power Supply include All Power Cables (compatible With North American Power Grid And Sockets) And Data Communication Cables other: onsite Training: The Vendor Is Requested To Include In The Proposal Costs For Onsite Training, Site Preparation, And Set-up Of The Equipment. The Product Needs To Be Installed And Tested For Accuracy And Functionality By The Vendor Prior To Crrel Acceptance, And Prior To Any Invoice Being Submitted/accepted. Names Of Any Employee Of The Vendor Visiting Crrel Need To Be Submitted In Advance For Security Review And All Crrel Visitors Shall Be Escorted By Crrel Staff While Onsite. For This Specific Action, We Will Only Consider Onsite Visitation By Us Citizens Or Five Eyes Citizens With Proper Identification After A Security Check. Offerors Are Warned That Use Of Non-us Citizens, Even From A Five Eyes Nation, Will Require Significant Advanced Notice For Crrel To Review That Person To Be Cleared For An Onsite Visit (minimally 45 Days Or Longer). manuals: Hard Copy And Digital Copies Of Manuals Shall Be Provided In English Covering Site Preparation, Installation, Operating And Maintenance. warranty: The Proposal Shall Include A 5-year Warranty Covering The Hardware (defects In Material And Workmanship). A Copy Of This Warranty Shall Be Provided With The Proposal For Review. please Reference The Attached Request For Quote (rfq) W913e524q0012 For Instructions And Applicable Provisions And Clauses. The Following Factors Shall Be Used To Evaluate Offers: 1. Technical Capability Of The Item Offered To Meet The Government Requirements. 2. Total Quoted Price (including Shipping Fob Destination To Hanover, Nh 03755). award Will Be Made To The Responsible Offeror Whose Quote Represents The Lowest Priced Technically Acceptable (lpta) Offer. a Technically Acceptable Quote Is One That Clearly Represents The Ability To Satisfy The Minimum Specified Requirements Outlined In Section C, Description Of Requirements (dor). quotes Are Intended To Be Evaluated, And Award Made, Without Discussions With The Offerors (other Than Discussions Conducted For The Purpose Of Minor Clarification) Unless Discussions Are Determined To Be Necessary. fob Destination: Hanover, Nh 03755 payment Terms: Net 30 please Provide Responses To This Notice, No Later Than Monday, 29 April 2024, 12:00 Pm, Central Standard Time (cst) To:latosha.n.rodgers@usace.army.mil telephone Responses Will Not Be Accepted. *note: In Order To Be Eligible For Award Of A Government Contract, Vendors Must Be Actively Registered In The System For Award Management (sam), Have No Active Exclusions, And Complete Representations And Certifications. For More Information, Review The Sam Website At Https://www.sam.gov.

Description: CATEGORY: Shaft Sleeve DE NDE Bronze Pt no 6UP3BR310 , Shaft Sleeve Nut RH Bronze Pt no 6UP3BR334 , Shaft Sleeve Nut LH Bronze Pt no 6UP3BR3341 , Gland Bronze Pt no 6UP3BR223 , Pump Shaft CCW C 40 pt no 6UP3C40180 , Bearing Holder DE CI Pt no 6UP3CI241 , Bearing Holder NDE CI Pt no 6UP3CI253 , Bearing Housing Unit STD Pt no 6UP3STDSUBBHU6UP3 , Shaft Sleeve DE NDE Bronze pt no 6UP4BR310 , Pump Shaft CCW C 40 pt no 6UP4C40180 , Shaft Sleeve Nut RH Bronze pt no 6UP3BR334 , Shaft Sleeve Nut LH Bronze Pt no 6UP4BR3341 , Set of Keys C 40 Pt no 6UP4C40SSOK1 , Shaft sleeve DE NDE Bronze Pt no DSM10036BR310 , Pump shaft C 40 Pt no DSM10036C40180 , Wear Ring CI Pt no DSM10036CI190 , Bearing cartridge CI Pt no DSM10036CI241 , Bearing Cartridge CI Pt no DSM10036CI253 , Set of Keys C 40 Pt no DSM10036C40SSOK1 , Split Gland CI Pt no DSM10036CI229 , Bearing Housing Unit STD Pt no DSM10036STDSUBBHUDSM36 , Top and Bottom Assembly CI Pt no DSM10036CISTABA , Balancing ring CI Pt no MLA100125CI463 , Blancing Disc CI Pt no MLA100125CI464 , Pump shaft 3Stage M type C 40 pt no MLA1001253C40180 , Pump shaft 5Stage M type C 40 Pt no MLA1001255C40180 , Set of O ring 5 stg Rubber Pt no MLA1001255RUBBERSSOR1 , Shaft Sleeve DS CI Pt no MLA100125CI310 , Shaft Sleeve NDS CI Pt no MLA100125CI 311 , Bearing Housing DE NDE M Type CI pt no MLA100125CI240 , Impeller Stage CI Pt no MLA100125CI151 , Delivery Casing CI Pt no MLA100125CI111 , Suction Casing CI Pt no MLA100125CI113 , Bearing Housing Unit STD Pt no RKB15034KSTDSUBBHU34K , Stage Casing CI RKB15034KCI124 , Pump Shaft 6 Stage C 40 Pt no RKB15034K6C40180 , Wear Ring Suction Side Bronze Pt no RKB15034KBR190 , Wear Ring Delivery Side Bronze Pt no RKB15034KBR191 , Shaft Sleeve Suction Side AISI 410 Pt no RKB15034KAISI410310 , Shaft Sleeve Delivery Side AISI 410 Pt no RKB15034KAISI410311 , Bearing Lock Nut C 20 Pt no RKB15034KC20336 , Round Lock Nut C 20 Pt no RKB15034KC203361 , Lock Washer STEEL Pt no RKB15034KSTEEL415 , Interstage Bush for DWGV Bronze Pt no RKB15034KBR355 , Oil Seal DE NDE RUBBER Pt no RKB15034KRUBBER500 , Pump Shaft 7 Stage C 40 Pt no RKB15034K7C40180 , Gland CI RKB15034KCI223 , Cooling Chamber MS Pt no RKB15034KMS252 , Delivery Casing CI Pt no RKB15034KCI111 , Suction Casing CI pt no RKB15034KCI113 , Bearing Housing Unit STD Pt no RKB12527KSTDSUBBHU27K , Cooling Chamber MS Pt no RKB12527KMS252 , Gland CI Pt no RKB12527KCI223 , Pump Shaft 5 Stage C 40 Pt no RKB12527K5C40180 , Wear Ring Delivery Side Bronze Pt no RKB12527KBR191 , Shaft Sleeve Suction Side AISI 410 Pt no RKB12527KAISI410310 , Shaft Sleeve Delivery Side AISI 410 Pt no RKB12527KAISI410311 , Distence Sleeve C 40 Pt no RKB12527KC40317 , Oil Seal DE NDE RUBBER Pt no RKB12527KRUBBER500 , Bearing Lock Nut C20 Pt no RKB12527KC20336 , Round Lock Nut C 20 Pt no 1RKB12527KC203361 , Lock Washer CS Pt no RKB12527KCS415 , Set of Tie Bars With Nut and Washer 5 Stage C 40 Pt no RKB12527K5C40SSOT1 , Oil Seal DE NDE Rubber Pt no RKB12530KRUBBER500 , Set of O Ring 7 Stage Rubber pt no RKB12530K7RUBBERSSOR1 , Rotating Assembly 7 Stage Std Ftd Pt no RKB12530K7STDFTDSUBRUA

Details: Suction caing CI RKB12527KCI113 , Enclosed impeller CI RKB12527KCI151 , Wear ring Suc side CI RKB12527KCI190 , WEar ring Del side CI RKB12527KCI191 , Inter stage bush for diffuser CI RKB12527KCI358 , Inter stage bush for DWGV CI RKB12527KCI355 , Diffuser with gaide vane CI RKB12527KCI129 , Shaft sleeve del side AISI 410 RKB12527KAISI410311 , Oil seal DE and NDE rubber RKB12527KRUBBER500 , Shaft sleeve suc side AISI 410 RKB12527KAISI410310 , Bearing housing unit STD RKB12527KSTDSUBBHU27K , Set of o ring 6 stage rubber RKB12527K6RUBBERSSOR1 , Set of Tie bars with nut and washer 6 stage C 40 RKB12527K6C40SSOT1 , Rotating assly 6 stage STD FTD RKB12527K6STDFTDSUBRUA , Compression Spring Steel RKB12527KSTEEL483 , Diffuser CI RKB12527KCI128 , pump shaft 6 stage C 40 RKB12527K6C40180 , Set of Keys 6stage C 40 RKB12527K6C40SSOK1 , Stage Casing CI RKB12527KCI124 , Gland CI RKB12527KCI223 , Bearing Housing CI RKB12527KCI241 , Shaft sleeve AISI 410 SHM6532NQSAISI410311 , Pump shaft C 40 SHM6532NQC40180 , Helicoil insert SS SHM6532NQSS479 , Screw for impeller AISI 410 SHM6532NQAISI410669 , Set of Oil seals Rubber SHM6532NQRUBBERSSOS1 , Bearing housing CI SHM6532NQCI240 , Internal circlip for Brg carterige Spring ST IS 4072 80C6 SHM6532NQSPST485 , Bearing cartridge DE CI SHM6532NQCI241 , Back pull out assly Q Type STD FTD SHM6532NQSTDFTDSUBBPA , Semi open impeller Q Type CI SHM6532NQCI151 , Pump Shaft C 40 DSM6532ABC40180 , Impeller Nut Bronze DSM6532ABBR330 , Impeller 1st stage CI DSM6532ABCI157 , Insert 1st stage CI DSM6532ABCI9891 , Insert 2nd stage CI DSM6532ABCI9892 , Rotating Assembly STD FTD DSM6532ABSTDFTDSUBRUA2 , Impeller 2nd stage CI DSM6532ABCI158 , Shaft sleeve DE NDE CI DSM10036CI310 , Shaft sleeve Nut Bronze DSM10036BR334 , Bearing housing Unit STD DSM10036STDSUBBHUDSM36 , Set of O Ring Rubber DSM10036RUBBERSSOR1 , Wear ring CI DSM10036CI190 , Top and Bottom Assembly CI DSM10036CISTABA , Impeller 1st stage CI DSM10036CI157 , Rotating Assembly STD FTD DSM4RMSTDFTDSUBRUA2 , Balancing Disc CI MLA100125CI463 , Balancing Ring CI MLA100125CI464 , Shaft Sleeve DS CI MLA100125CI310 , Shaft Sleeve NDS CI MLA100125CI311 , Wear Ring CI MLA100125CI190 , Inter Stage Bush CI MLA100125CI358 , Bearing Housing DE NDE M Type CI MLA100125CI240 , Set of O Ring for 5 Stage Rubber MLA1001255RUBBERSSOR , Pump Shaft 3 Stage M Type C 40 MLA1001253C40180 , Suction Casing CI MLA100125CI113 , Delivery Casing CI MLA100125CI111 , Impeller Stage CI MLA100125CI151 , Set of Keys 5 Stage C 40 MLA1001255C40SSOK1 , Set of CTSK Screw 5 Stage CL4 6 MLA1001255C40SSOK1

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-223 Bidding December 3, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Fifteen (15) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 3 Unit Microscope 750,000.00 Observation Method Brightfield✓darkfield✓phase Contrast✓fluorescence (blue/green Excitations)✓simple Polarized Light✓focusfocusing Mechanism Stage Focus✓coarse Handle Stroke (26mm) Coarse Handle Stroke Per Rotation (36.8 Mm) Stage Height Movement By Roller Guide (rack And Pinion) Upper Limit Stopper Tension Adjustment On Coarse Focus Adjustment Knob Stage: Manual Stages With Right0 Hand Control Buit- In X: 76 Mm; Y: 50 Mm Condenser: Manual Darkfield Condenser Dryna 0.8- 0.92/ W.d. 4.52 Mm (10x- 40x) Abbe Condenser Na 1.25/ W.d. 0.5 Mm (4x- 100x) Simple Polarizing Condenser Na 1.25/ W.d. (4x- 100x) Slide Condenser Na W.d. (4x- 100x) Observation Tubes Widefield (fn 22) Binocular Tilting Binocular Trinocular Tube Inclination Angle 30o 30- 60o Trinocular Tube Light Path Selection (camera: Observation) 50%- 50% Interpupillary Distance Adjustment 48- 75mm Dimensions: (w X D X H)233 (w) X 367.5 Mm (d) X 432 Mm (h) Weight: 8.5 Kg (standard Configuration)) X 367.5 Mm (d) X 432 Mm (h) Weight: 8.5 Kg (standard Configuration) Please Indicate Brand Of Offer And Attach Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possessvalid Mayor's/business Permit With A Relevant Line Of Business In The Sale Of Medical/laboratory Equipment For Use Of Hso Under Pr No. 43 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, December 13, 2024 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 1

Details: Advance Contract Award Notice (acan) [24-58245] [scanning Electron Microscope With Field Emission Gun (sem-feg), Integrated Energy Dispersive Spectrometry (eds) And Electron Backscattered Diffraction (ebsd) Systems] 1. Advance Contract Award Notice (acan) An Acan Is A Public Notice Indicating To The Supplier Community That A Department Or Agency Intends To Award A Contract For Goods, Services Or Construction To A Pre-identified Supplier, Thereby Allowing Other Suppliers To Signal Their Interest In Bidding, By Submitting A Statement Of Capabilities. If No Supplier Submits A Statement Of Capabilities That Meets The Requirements Set Out In The Acan, On Or Before The Closing Date Stated In The Acan, The Contracting Officer May Then Proceed With The Award To The Pre-identified Supplier. 2. Definition Of The Requirement The National Research Council Canada Has A Requirement For The Supply Of Quantity One (1) Fully Digital, Extreme High Resolution Field Emission Scanning Electron Microscope (fe-sem) System, In Compliance With Csa And Semi S2 And S8 Certification Requirements. The System Must Also Provide A Retractable Energy Dispersive X-ray Spectrometer (eds) And Electron Backscattered Diffraction (ebsd) Integrated System, A Retractable Scanning Transmission Electron Microscopy (stem) Detector, A Gas Injection System (gis) For Platinum Deposition, On-site And/or Remote Applications Training For Three Nrc Staff Members, A Csa Approved Installation Kit Suitable For Canadian Installations, And An Annual Service Maintenance Contract Covering An Additional Three Years Of Ownership After The Provided Manufacturer Warranty And Service Period. The Annual Service Maintenance Contract Must Include Labour, Travel, Living Expenses And Major Parts Coverage And Must Have A Targeted On-site Service Response Time Of 48 Hours, During Normal Business Hours, To The Ottawa, On – Montreal Rd. Nrc Campus. The Minimum Specifications And Requirements For The Fe-sem System Must Meet And Include All Of The Following: • Beam Characteristics: O Acceleration Voltage: 350 V To 30 Kv O Landing Energies: Adjustable From 20 Ev To 30 Kev O Beam Current: 0.8 Pa – 100 Na • Resolution: O 0.6 Nm From 30 Kv Down To 2 Kv O 0.7 Nm At 1 Kv O 1.0 Nm At 500 Ev • A Hot-swappable Schottky Thermal ?eld-emission Source Capable Of Providing An Electron Beam With Incident Energy Ranging From 20 Ev - 30,000 Ev And A Current Range Of 0.8 Pa To 100 Na • A Dual-mode (magnetic Immersion And Field-free) Lens To Enable Extremely High-resolution Imaging Over A Working Distance Range From 8 Mm To As Low As 0.5 Mm. Extremely High Resolution Is Defined Above As 0.6 Nm From 30 Kv Down To 2 Kv, 0.7 Nm At 1 Kv, And 1.0 Nm At 500 Ev. • Sixty-degree Dual Objective Lens With A Protection Feature To Protect The Lens Unit From Damage Due To Accidental Sample Contact And To Enable Tilting Of Large Samples. • A Monochromated Electron Beam Source Capable Of Reducing The Energy Spread To Less Than 0.2 Ev Across All Accelerating Voltages Within The Chromatic Aberration-limited Regime Typically Associated With High Surface Sensitivity Imaging. Specifically, The Monochromator Must Provide Up 100 Pa Of Beam Current Across The Nominal Incident Beam Energy Range Of 500 Ev - 5 Kev As Well As For Beams With Landing Energies Down To 20 Ev. • A 6.0 Megapixel (mp) Or Greater Resolution Optical Color Navigation Camera To Provide A Full View Of Sample Holder Over The Full Range Of Travel Of The Xy Stage. • A Single Sem Column With Multiple Detectors Capable Of Secondary Electron (se) And Backscattered Electron (bse) Detection That Is Specially Designed For Extremely High-resolution Imaging (defined Above) At Both High And Low Kvs. It Must Also Be Designed For Excellent Materials Contrast And Imaging At Landing Energies Down To 500 Ev, Capable Of Providing Simultaneous In-lens Se And Bse Imaging, And Provide Excellent Direct Detection Of Low Loss Bses. • A Retractable, Single Crystal Stem Detector For Annular Bright Field, Dark Field, And High Angle Annular Dark Field Regions. • A Directional Back Scatter (dbs) Detector Capable Of Detecting All Backscattered Electrons Emitted Up To 90 Degrees. • Large Specimen Chamber With A Door-mounted 5-axes Motorized X-y-z-rotate-tilt Eucentric Stage, Capable Of Loading Specimens With The Size Of 150 X 150 X 55 Mm With Full (360o) Rotation • A Drift-free Image Mode Setting To Permit High-resolution, High Signal-to-noise Images Under Conditions Of Very Low Dwell Times. 3. Criteria For Assessment Of The Statement Of Capabilities (minimum Essential Requirements) O Any Interested Supplier Must Demonstrate By Way Of A Statement Of Capabilities That Its System (as Appropriate) Meets All Of The Following Requirements: ? A Demonstrated Schottky Thermal ?eld-emission Source That Is Hot-swappable For A Fast And Contamination-free Source Exchange. ? A Monochromated Electron Beam Source Capable Of Reducing The Energy Spread To Less Than 0.2 Ev Across All Accelerating Voltages Within The Chromatic Aberration-limited Regime Typically Associated With High Surface Sensitivity Imaging. Specifically, The Monochromator Must Provide Up 100 Pa Of Beam Current Across The Nominal Incident Beam Energy Range Of 500 Ev - 5 Kev As Well As For Beams With Landing Energies Down To 20 Ev. ? The Ability To Maintain The Thermal Stability Of The Electron Column Over The Full Range Of Magnifications, Lens Currents And Accelerating Voltages. ? An Optical Color Navigation Camera That Provides A Full View Of Sample Holder Over The Full Range Of Xy Stage Travel With A Resolution Of 6.0 Mp Or Greater. ? A Single Sem Column With Multiple Detectors Capable Of Secondary Electron (se) And Backscattered Electron (bse) Detection That Is Specially Designed For High-resolution Imaging At Both High And Low Kvs. It Must Also Be Designed For Excellent Materials Contrast And Imaging At Landing Energies Down To 500 Ev And Capable Of Providing Simultaneous In-lens Se And Bse Imaging, And Provide Excellent Direct Detection Of Low Loss Bses. ? A Retractable, Single Crystal Stem Detector With 11 Segments For Annular Bright Field, Dark Field, And High Angle Annular Dark Field Regions. ? A Two-mode, Nine-segment Annular Directional Back Scatter (dbs) Detector Capable Of Detecting All Backscattered Electrons Emitted Up To 90 Degrees When Beam Deceleration Is Applied In Combination With An Immersion Field. ? A 150 Mm X 150 Mm X-axis/y-axis Piezo Stage With 1 Micron Or Better Repeatability And Must Have Continuous 360° Piezo-driven Rotation. ? A Drift-free Image Mode Setting To Permit High-resolution, High Signal-to-noise Images Under Conditions Of Very Low Dwell Times. 4. Applicability Of The Trade Agreement(s) To The Procurement This Procurement Is Subject To The Following Trade Agreement(s) O Canadian Free Trade Agreement (cfta) O Revised World Trade Organization - Agreement On Government Procurement (wto-agp) O Canada-european Union Comprehensive Economic And Trade Agreement (ceta) O Comprehensive And Progressive Agreement For Trans-pacific Partnership (cptpp) O Canada-chile Free Trade Agreement (ccfta) O Canada-colombia Free Trade Agreement O Canada-honduras Free Trade Agreement O Canada-korea Free Trade Agreement O Canada-panama Free Trade Agreement O Canada-peru Free Trade Agreement (cpfta) O Canada-united Kingdom Trade Continuity Agreement (canada-uk Tca) O Canada-ukraine Free Trade Agreement (cufta) 5. Justification For The Pre-identified Supplier The Verios 5 Uc From Thermo Fisher Scientific Has Been Identified As The Only Fully Digital, Extreme High Resolution Field Emission Scanning Electron Microscope (fe-sem) That Meets All Of The Criteria Set Out In The Statement Of Capabilities. The Pre-identified Vendor, Systems For Research Corporation (sfr), Is The Sole Distributor And Only Authorized Technical Support And Repair Company In Canada For Fe-sems Manufactured By Thermo Fisher Scientific 6. Government Contracts Regulations Exception(s) The Following Exception(s) To The Government Contracts Regulations Is (are) Invoked For This Procurement Under Subsection 6(d) “only One Person Is Capable Of Performing The Work. 7. Exclusions And/or Limited Tendering Reasons The Following Exclusion(s) And/or Limited Tendering Reasons Are Invoked Under The: A. Canadian Free Trade Agreement (cfta) – Article 513 (1) (b) (iii): Due To An Absence Of Competition For Technical Reasons; B. World Trade Organization - Agreement On Government Procurement (wto-agp) – Article Xiii (b) (iii): Due To An Absence Of Competition For Technical Reasons; C. Canada-european Union Comprehensive Economic And Trade Agreement (ceta) – Article 19.12 (b) (iii): Due To An Absence Of Competition For Technical Reasons; D. Comprehensive And Progressive Agreement For Trans-pacific Partnership (cptpp) – Article 15.10 (2) (b) (iii): Due To An Absence Of Competition For Technical Reasons; E. Canada-chile Free Trade Agreement (ccfta) – Article Kbis-16 (2) (c): Necessary To Protect Intellectual Property; F. Canada-colombia Free Trade Agreement – Article 1409 (1) (b) (iii): Due To An Absence Of Competition For Technical Reasons; G. Canada-honduras Free Trade Agreement – Article 17.11 (2) (b) (iii): Due To An Absence Of Competition For Technical Reasons; H. Canada-korea Free Trade Agreement – Referencing The Wto Protocol Amending The Gpa, Article Xiii (1) (b) (iii): Due To An Absence Of Competition For Technical Reasons; I. Canada-panama Free Trade Agreement – Article 16.10 (1) (b) (iii): Because Of The Absence Of Competition For Technical Reasons; J. Canada-peru Free Trade Agreement (cpfta) –article 1409 (1) (b) (iii): Due To An Absence Of Competition For Technical Reasons; K. Canada-ukraine Free Trade Agreement (cufta) – Annex 10-6 (2) (a): Any Form Of Preference, Including Set Asides, To Benefit Micro, Small And Medium Enterprises; And L. Canada-united Kingdom Trade Continuity Agreement: Refer To Ceta As The Provisions Of Ceta Are Incorporated By Reference Into And Made Part Of This Agreement. (ceta) Article 19.12 (b) (iii). 8. Period Of The Proposed Contract Or Delivery Date All The Deliverables Are Expected To Be Received On Or Before 6 Weeks After Contract Award. 9. Name And Address Of The Pre-identified Supplier Systems For Research Corp. · 4243c Dundas Street West, Unit #7, Etobicoke, On, M8x 1y3 10. Suppliers' Right To Submit A Statement Of Capabilities Suppliers Who Consider Themselves Fully Qualified And Available To Provide The Goods, Services Or Construction Services Described In The Acan May Submit A Statement Of Capabilities In Writing To The Contact Person Identified In This Notice On Or Before The Closing Date Of This Notice. The Statement Of Capabilities Must Clearly Demonstrate How The Supplier Meets The Advertised Requirements. 11. Closing Date For A Submission Of A Statement Of Capabilities The Closing Date And Time For Accepting Statements Of Capabilities Is December 24th 2024. 12. Inquiries And Submission Of Statements Of Capabilities Inquiries And Statements Of Capabilities Are To Be Directed To: Jonathan Soles E-mail:jonathan.soles@nrc-cnrc.gc.ca

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 21 Of 21 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 21 (i) This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Offers Are Being Requested And A Written Solicitation Will Not Be Issued. (ii) The Solicitation Number 36c26224q1362 Is Issued As A Request For Quotation (rfq). (iii) The Provisions And Clauses In This Document Are In Effect Through The Federal Acquisition Circular. (iv) This Solicitation Is Unrestricted Using Naics Code 334510 Having A Size Standard Of 1250 Employees. (v) Product Information: **manufacture Is Sci Measures Analytical Systems, Inc.** item # description/part Number* 1 osteomeasure High Resolution Digital Video System 2 osteomeasure 0.63x Camera Adapter 3 rotatable Specimen Holder salient Characteristics system Description this Requirement Is For One Dynamic Bone Histomorphometry Digital Color Video System With The Following Specifications For The Va Approved Research Projects. this System: must Have A High-resolution Ccd Camera That Can Capture Digital Imaging And Convert Images Into Multiple Digital Output Formats. must Have A High-resolution Video Frame System That Can Grab And Mix High Resolution Video Images And Graphics And Convert This Input Video Into Vga-compatible Output That Can Be Examined In Windows Formats. must Have A High-resolution, Color-corrected C-mount Video Adapter To Adapt The Ccd Camera To The Microscope. must Have Fluorescence Mode That Is Capable Of Capturing Real-time Fluorescent Images, Including Low Light Level Images. must Have A Rotatable Stage Specimen Holder. must Have An Active Area Drawing ( Touch )-screen That Can Measure Various Parameters Of Images. must Have An Analysis System That Is Based On Standard Nomenclature Of Skeletal Elements As Specified By The American Society For Bone And Mineral Research (asbmr), And An Accompanying Measurement List To Automatically Analyze And Annotate Various Bone And Mineral Parameters As Specified By The Asbmr. (vi) The Us Government, Veterans Affairs (va) Seeks To Make A Procurement For The Osteomeasure System For The Va Loma Linda Healthcare System. offeror Quotations Must Demonstrate Meeting The Salient Physical, Functional, Or Performance Characteristic Specified In This Solicitation, Otherwise It Will Be Considered Non-responsive. The Technical Specifications For This Requirement Are Listed For Brand Name Or Equal Per Far 52.211-6. the Information Identified Provided Is Intended To Be Descriptive, Not Restrictive And To Indicate The Quality That Will Be Satisfactory. The Interested Parties Bear Full Responsibility To Ensure Their Submission Demonstrates To The Government That They Can Provide The Brand Name Or Equal To Supplies Being Requested. (vii) Delivery Requirements: place Of Delivery va Loma Linda Healthcare System | 11201 Benton St. | Loma Linda, Ca 92357 period Of Performance/delivery Timeframe: deliver Items No Later Than 30 Days From The Award Date. (viii) The Provision At 52.212-1, Instructions To Offerors Commercial Items, Applies To This Solicitation. far 52.212-1 Addendum: all Offeror Quotes For This Solicitation Must Be Received Electronically Through Email No Later Than Friday June 21, 2024, At 1:00 Pm Pst. Ensure To Reference Solicitation Number 36c26224q1362 Within Subject Line Of The Email. Any Offeror Quotes Received After The Prescribed Date/time Shall Be Considered Late And Will Not Be Considered For Award offers Shall Be Sent By Email To Carlo Manuel At Carlo.manuel@va.gov . (ix) The Provision At Far 52.212-2, Evaluation -- Commercial Items (oct 2014), Applies To This Solicitation. far 52.212-2 Addendum / Replacement: (a) The Government Will Award A Contract Resulting From This Solicitation To The Responsive And Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers: lowest Priced Quotation That Meets All Salient Characteristics That Is Both Responsive And Responsible. acceptability Of Equipment/services Shall Be Established By Review Of Each Submitted Quotation By The Designated Evaluator(s) And Verification That Any Equal-to Items Meet The Salient Characteristics Included In This Solicitation. Submissions To This Solicitation Must Show Clear, Compelling And Convincing Evidence That Equal-to Items Meet All The Salient Characteristics. Offers That Include Any Items That Are Not Determined As Brand Name Or Equal Shall Result In An Unacceptable Offer. See 52.211-6 Brand Name Or Equal For Additional Information. (b) Options. The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). (c) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified With A Minimum Of At Least Sixty Days, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer S Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. (end Of Provision) authorized Distributor Letter (adl) any Suppliers, Distributors And/or Resellers Who Participate In This Solicitation, Must Be Authorized To Provide The Supplies By The Original Equipment Manufacturer (oem). An Authorized Distributor Letter (adl) From The Manufacturer Shall Be Included With Your Response To Be Considered For Award. if The Potential Authorized Supplier Is Not The Oem, The Authorized Supplier Must Provide An Authorized Distributor Letter From The Oem Signed Within The Last 90 Days. The Letter Must Either State Specific Product(s) Quoted Or That The Quoter Is An Authorized Distributor For All Of The Manufacturer S Products. This Letter Must Be On The Manufacturer S Letterhead And Contain The Signature Of An Authorized Official For The Manufacturer. (x) Must Include A Completed Copy Of The Provision At 52.212-3 -- Offeror Representations And Certifications -- Commercial Items, With This Solicitation Or Ensure Sam.gov Is Updated With Current Information. (xi) The Clause At 52.212-4, Contract Terms And Conditions -- Commercial Items, Applies To This Acquisition. 52.212-4 Contract Terms And Conditions Commercial Items (oct 2018) (a) Inspection/acceptance. The Contractor Shall Only Tender For Acceptance Those Items That Conform To The Requirements Of This Contract. The Government Reserves The Right To Inspect Or Test Any Supplies Or Services That Have Been Tendered For Acceptance. The Government May Require Repair Or Replacement Of Nonconforming Supplies Or Reperformance Of Nonconforming Services At No Increase In Contract Price. If Repair/replacement Or Reperformance Will Not Correct The Defects Or Is Not Possible, The Government May Seek An Equitable Price Reduction Or Adequate Consideration For Acceptance Of Nonconforming Supplies Or Services. The Government Must Exercise Its Post-acceptance Rights (1) Within A Reasonable Time After The Defect Was Discovered Or Should Have Been Discovered; And (2) Before Any Substantial Change Occurs In The Condition Of The Item, Unless The Change Is Due To The Defect In The Item. (b) Assignment. The Contractor Or Its Assignee May Assign Its Rights To Receive Payment Due As A Result Of Performance Of This Contract To A Bank, Trust Company, Or Other Financing Institution, Including Any Federal Lending Agency In Accordance With The Assignment Of Claims Act (31 U.s.c. 3727). However, When A Third Party Makes Payment (e.g., Use Of The Governmentwide Commercial Purchase Card), The Contractor May Not Assign Its Rights To Receive Payment Under This Contract. (c) Changes. Changes In The Terms And Conditions Of This Contract May Be Made Only By Written Agreement Of The Parties. (d) Disputes. This Contract Is Subject To 41 U.s.c. Chapter 71, Contract Disputes. Failure Of The Parties To This Contract To Reach Agreement On Any Request For Equitable Adjustment, Claim, Appeal Or Action Arising Under Or Relating To This Contract Shall Be A Dispute To Be Resolved In Accordance With The Clause At Far 52.233-1, Disputes, Which Is Incorporated Herein By Reference. The Contractor Shall Proceed Diligently With Performance Of This Contract, Pending Final Resolution Of Any Dispute Arising Under The Contract. (e) Definitions. The Clause At Far 52.202-1, Definitions, Is Incorporated Herein By Reference. (f) Excusable Delays. The Contractor Shall Be Liable For Default Unless Nonperformance Is Caused By An Occurrence Beyond The Reasonable Control Of The Contractor And Without Its Fault Or Negligence Such As, Acts Of God Or The Public Enemy, Acts Of The Government In Either Its Sovereign Or Contractual Capacity, Fires, Floods, Epidemics, Quarantine Restrictions, Strikes, Unusually Severe Weather, And Delays Of Common Carriers. The Contractor Shall Notify The Contracting Officer In Writing As Soon As It Is Reasonably Possible After The Commencement Of Any Excusable Delay, Setting Forth The Full Particulars In Connection Therewith, Shall Remedy Such Occurrence With All Reasonable Dispatch, And Shall Promptly Give Written Notice To The Contracting Officer Of The Cessation Of Such Occurrence. (g) Invoice. (1) The Contractor Shall Submit An Original Invoice And Three Copies (or Electronic Invoice, If Authorized) To The Address Designated In The Contract To Receive Invoices. An Invoice Must Include (i) Name And Address Of The Contractor; (ii) Invoice Date And Number; (iii) Contract Number, Line Item Number And, If Applicable, The Order Number; (iv) Description, Quantity, Unit Of Measure, Unit Price And Extended Price Of The Items Delivered; (v) Shipping Number And Date Of Shipment, Including The Bill Of Lading Number And Weight Of Shipment If Shipped On Government Bill Of Lading; (vi) Terms Of Any Discount For Prompt Payment Offered; (vii) Name And Address Of Official To Whom Payment Is To Be Sent; (viii) Name, Title, And Phone Number Of Person To Notify In Event Of Defective Invoice; And (ix) Taxpayer Identification Number (tin). The Contractor Shall Include Its Tin On The Invoice Only If Required Elsewhere In This Contract. (x) Electronic Funds Transfer (eft) Banking Information. (a) The Contractor Shall Include Eft Banking Information On The Invoice Only If Required Elsewhere In This Contract. (b) If Eft Banking Information Is Not Required To Be On The Invoice, In Order For The Invoice To Be A Proper Invoice, The Contractor Shall Have Submitted Correct Eft Banking Information In Accordance With The Applicable Solicitation Provision, Contract Clause (e.g., 52.232-33, Payment By Electronic Funds Transfer System For Award Management, Or 52.232-34, Payment By Electronic Funds Transfer Other Than System For Award Management), Or Applicable Agency Procedures. (c) Eft Banking Information Is Not Required If The Government Waived The Requirement To Pay By Eft. (2) Invoices Will Be Handled In Accordance With The Prompt Payment Act (31 U.s.c. 3903) And Office Of Management And Budget (omb) Prompt Payment Regulations At 5 Cfr Part 1315. (h) Patent Indemnity. The Contractor Shall Indemnify The Government And Its Officers, Employees And Agents Against Liability, Including Costs, For Actual Or Alleged Direct Or Contributory Infringement Of, Or Inducement To Infringe, Any United States Or Foreign Patent, Trademark Or Copyright, Arising Out Of The Performance Of This Contract, Provided The Contractor Is Reasonably Notified Of Such Claims And Proceedings. (i) Payment. (1) Items Accepted. Payment Shall Be Made For Items Accepted By The Government That Have Been Delivered To The Delivery Destinations Set Forth In This Contract. (2) Prompt Payment. The Government Will Make Payment In Accordance With The Prompt Payment Act (31 U.s.c. 3903) And Prompt Payment Regulations At 5 Cfr Part 1315. (3) Electronic Funds Transfer (eft). If The Government Makes Payment By Eft, See 52.212-5(b) For The Appropriate Eft Clause. (4) Discount. In Connection With Any Discount Offered For Early Payment, Time Shall Be Computed From The Date Of The Invoice. For The Purpose Of Computing The Discount Earned, Payment Shall Be Considered To Have Been Made On The Date Which Appears On The Payment Check Or The Specified Payment Date If An Electronic Funds Transfer Payment Is Made. (5) Overpayments. If The Contractor Becomes Aware Of A Duplicate Contract Financing Or Invoice Payment Or That The Government Has Otherwise Overpaid On A Contract Financing Or Invoice Payment, The Contractor Shall (i) Remit The Overpayment Amount To The Payment Office Cited In The Contract Along With A Description Of The Overpayment Including The (a) Circumstances Of The Overpayment (e.g., Duplicate Payment, Erroneous Payment, Liquidation Errors, Date(s) Of Overpayment); (b) Affected Contract Number And Delivery Order Number, If Applicable; (c) Affected Line Item Or Subline Item, If Applicable; And (d) Contractor Point Of Contact. (ii) Provide A Copy Of The Remittance And Supporting Documentation To The Contracting Officer. (6) Interest. (i) All Amounts That Become Payable By The Contractor To The Government Under This Contract Shall Bear Simple Interest From The Date Due Until Paid Unless Paid Within 30 Days Of Becoming Due. The Interest Rate Shall Be The Interest Rate Established By The Secretary Of The Treasury As Provided In 41 U.s.c. 7109, Which Is Applicable To The Period In Which The Amount Becomes Due, As Provided In (i)(6)(v) Of This Clause, And Then At The Rate Applicable For Each Six-month Period As Fixed By The Secretary Until The Amount Is Paid. (ii) The Government May Issue A Demand For Payment To The Contractor Upon Finding A Debt Is Due Under The Contract. (iii) Final Decisions. The Contracting Officer Will Issue A Final Decision As Required By 33.211 If (a) The Contracting Officer And The Contractor Are Unable To Reach Agreement On The Existence Or Amount Of A Debt Within 30 Days; (b) The Contractor Fails To Liquidate A Debt Previously Demanded By The Contracting Officer Within The Timeline Specified In The Demand For Payment Unless The Amounts Were Not Repaid Because The Contractor Has Requested An Installment Payment Agreement; Or (c) The Contractor Requests A Deferment Of Collection On A Debt Previously Demanded By The Contracting Officer (see 32.607-2). (iv) If A Demand For Payment Was Previously Issued For The Debt, The Demand For Payment Included In The Final Decision Shall Identify The Same Due Date As The Original Demand For Payment. (v) Amounts Shall Be Due At The Earliest Of The Following Dates: (a) The Date Fixed Under This Contract. (b) The Date Of The First Written Demand For Payment, Including Any Demand For Payment Resulting From A Default Termination. (vi) The Interest Charge Shall Be Computed For The Actual Number Of Calendar Days Involved Beginning On The Due Date And Ending On (a) The Date On Which The Designated Office Receives Payment From The Contractor; (b) The Date Of Issuance Of A Government Check To The Contractor From Which An Amount Otherwise Payable Has Been Withheld As A Credit Against The Contract Debt; Or (c) The Date On Which An Amount Withheld And Applied To The Contract Debt Would Otherwise Have Become Payable To The Contractor. (vii) The Interest Charge Made Under This Clause May Be Reduced Under The Procedures Prescribed In 32.608-2 Of The Federal Acquisition Regulation In Effect On The Date Of This Contract. (j) Risk Of Loss. Unless The Contract Specifically Provides Otherwise, Risk Of Loss Or Damage To The Supplies Provided Under This Contract Shall Remain With The Contractor Until, And Shall Pass To The Government Upon: (1) Delivery Of The Supplies To A Carrier, If Transportation Is F.o.b. Origin; Or (2) Delivery Of The Supplies To The Government At The Destination Specified In The Contract, If Transportation Is F.o.b. Destination. (k) Taxes. The Contract Price Includes All Applicable Federal, State, And Local Taxes And Duties. (l) Termination For The Government's Convenience. The Government Reserves The Right To Terminate This Contract, Or Any Part Hereof, For Its Sole Convenience. In The Event Of Such Termination, The Contractor Shall Immediately Stop All Work Hereunder And Shall Immediately Cause Any And All Of Its Suppliers And Subcontractors To Cease Work. Subject To The Terms Of This Contract, The Contractor Shall Be Paid A Percentage Of The Contract Price Reflecting The Percentage Of The Work Performed Prior To The Notice Of Termination, Plus Reasonable Charges The Contractor Can Demonstrate To The Satisfaction Of The Government Using Its Standard Record Keeping System, Have Resulted From The Termination. The Contractor Shall Not Be Required To Comply With The Cost Accounting Standards Or Contract Cost Principles For This Purpose. This Paragraph Does Not Give The Government Any Right To Audit The Contractor's Records. The Contractor Shall Not Be Paid For Any Work Performed Or Costs Incurred Which Reasonably Could Have Been Avoided. (m) Termination For Cause. The Government May Terminate This Contract, Or Any Part Hereof, For Cause In The Event Of Any Default By The Contractor, Or If The Contractor Fails To Comply With Any Contract Terms And Conditions, Or Fails To Provide The Government, Upon Request, With Adequate Assurances Of Future Performance. In The Event Of Termination For Cause, The Government Shall Not Be Liable To The Contractor For Any Amount For Supplies Or Services Not Accepted, And The Contractor Shall Be Liable To The Government For Any And All Rights And Remedies Provided By Law. If It Is Determined That The Government Improperly Terminated This Contract For Default, Such Termination Shall Be Deemed A Termination For Convenience. (n) Title. Unless Specified Elsewhere In This Contract, Title To Items Furnished Under This Contract Shall Pass To The Government Upon Acceptance, Regardless Of When Or Where The Government Takes Physical Possession. (o) Warranty. The Contractor Warrants And Implies That The Items Delivered Hereunder Are Merchantable And Fit For Use For The Particular Purpose Described In This Contract. (p) Limitation Of Liability. Except As Otherwise Provided By An Express Warranty, The Contractor Will Not Be Liable To The Government For Consequential Damages Resulting From Any Defect Or Deficiencies In Accepted Items. (q) Other Compliances. The Contractor Shall Comply With All Applicable Federal, State And Local Laws, Executive Orders, Rules And Regulations Applicable To Its Performance Under This Contract. (r) Compliance With Laws Unique To Government Contracts. The Contractor Agrees To Comply With 31 U.s.c. 1352 Relating To Limitations On The Use Of Appropriated Funds To Influence Certain Federal Contracts; 18 U.s.c. 431 Relating To Officials Not To Benefit; 40 U.s.c. Chapter 37, Contract Work Hours And Safety Standards; 41 U.s.c. Chapter 87, Kickbacks; 41 U.s.c. 4712 And 10 U.s.c. 2409 Relating To Whistleblower Protections; 49 U.s.c. 40118, Fly American; And 41 U.s.c. Chapter 21 Relating To Procurement Integrity. (s) Order Of Precedence. Any Inconsistencies In This Solicitation Or Contract Shall Be Resolved By Giving Precedence In The Following Order: (1) The Schedule Of Supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance With Laws Unique To Government Contracts, And Unauthorized Obligations Paragraphs Of This Clause; (3) The Clause At 52.212-5. (4) Addenda To This Solicitation Or Contract, Including Any License Agreements For Computer Software. (5) Solicitation Provisions If This Is A Solicitation. (6) Other Paragraphs Of This Clause. (7) The Standard Form 1449. (8) Other Documents, Exhibits, And Attachments (9) The Specification. (t) [reserved] (u) Unauthorized Obligations. (1) Except As Stated In Paragraph (u)(2) Of This Clause, When Any Supply Or Service Acquired Under This Contract Is Subject To Any End User License Agreement (eula), Terms Of Service (tos), Or Similar Legal Instrument Or Agreement, That Includes Any Clause Requiring The Government To Indemnify The Contractor Or Any Person Or Entity For Damages, Costs, Fees, Or Any Other Loss Or Liability That Would Create An Anti-deficiency Act Violation (31 U.s.c. 1341), The Following Shall Govern: (i) Any Such Clause Is Unenforceable Against The Government. (ii) Neither The Government Nor Any Government Authorized End User Shall Be Deemed To Have Agreed To Such Clause By Virtue Of It Appearing In The Eula, Tos, Or Similar Legal Instrument Or Agreement. If The Eula, Tos, Or Similar Legal Instrument Or Agreement Is Invoked Through An I Agree Click Box Or Other Comparable Mechanism (e.g., Click-wrap Or Browse-wrap Agreements), Execution Does Not Bind The Government Or Any Government Authorized End User To Such Clause. (iii) Any Such Clause Is Deemed To Be Stricken From The Eula, Tos, Or Similar Legal Instrument Or Agreement. (2) Paragraph (u)(1) Of This Clause Does Not Apply To Indemnification By The Government That Is Expressly Authorized By Statute And Specifically Authorized Under Applicable Agency Regulations And Procedures. (v) Incorporation By Reference. The Contractor S Representations And Certifications, Including Those Completed Electronically Via The System For Award Management (sam), Are Incorporated By Reference Into The Contract. (end Of Clause) (xii) The Clause At 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, Applies To This Acquisition. 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Items (jun 2020) (a) The Contractor Shall Comply With The Following Federal Acquisition Regulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Items: (1) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2) 52.204 23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab And Other Covered Entities (jul 2018) (section 1634 Of Pub. L. 115 91). (3) 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (aug 2019) (section 889(a)(1)(a) Of Pub. L. 115 232). (4) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015). (5) 52.233-3, Protest After Award (aug 1996) (31 U.s.c. 3553). (6) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) (public Laws 108-77 And 108-78 (19 U.s.c. 3805 Note)). (b) The Contractor Shall Comply With The Far Clauses In This Paragraph (b) That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Items: [] (1) 52.203 6, Restrictions On Subcontractor Sales To The Government (jun 2020), With Alternate I (oct 1995) (41 U.s.c. 4704 And 10 U.s.c. 2402). [] (2) 52.203 13, Contractor Code Of Business Ethics And Conduct (jun 2020) (41 U.s.c. 3509). [] (3) 52.203 15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009 (jun 2010) (section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) [] (4) 52.204 10, Reporting Executive Compensation And First-tier Subcontract Awards (jun 2020) (pub. L. 109 282) (31 U.s.c. 6101 Note). [] (5) [reserved] [] (6) 52.204 14, Service Contract Reporting Requirements (oct 2016) (pub. L. 111 117, Section 743 Of Div. C). [] (7) 52.204 15, Service Contract Reporting Requirements For Indefinite-delivery Contracts (oct 2016) (pub. L. 111 117, Section 743 Of Div. C). [] (8) 52.209 6, Protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment. (jun 2020) (31 U.s.c. 6101 Note). [] (9) 52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters (oct 2018) (41 U.s.c. 2313). [] (10) [reserved] [] (11)(i) 52.219-3, Notice Of Hubzone Set-aside Or Sole-source Award (mar 2020) (15 U.s.c. 657a). [] (ii) Alternate I (mar 2020) Of 52.219-3. [x] (12)(i) 52.219-4, Notice Of Price Evaluation Preference For Hubzone Small Business Concerns (mar 2020) (if The Offeror Elects To Waive The Preference, It Shall So Indicate In Its Offer) (15 U.s.c. 657a). [] (ii) Alternate I (mar 2020) Of 52.219-4. [] (13) [reserved] [] (14)(i) 52.219-6, Notice Of Total Small Business Set-aside (mar 2020) (15 U.s.c. 644). [] (ii) Alternate I (mar 2020). [] (15)(i) 52.219-7, Notice Of Partial Small Business Set-aside (mar 2020) (15 U.s.c. 644). [] (ii) Alternate I (mar 2020) Of 52.219-7. [] (16) 52.219-8, Utilization Of Small Business Concerns (oct 2018) (15 U.s.c. 637(d)(2) And (3)). [] (17)(i) 52.219 9, Small Business Subcontracting Plan (jun 2020) (15 U.s.c. 637(d)(4)). [] (ii) Alternate I (nov 2016) Of 52.219-9. [] (iii) Alternate Ii (nov 2016) Of 52.219-9. [] (iv) Alternate Iii (jun 2020) Of 52.219 9. [] (v) Alternate Iv (jun 2020) Of 52.219 9. [] (18) 52.219-13, Notice Of Set-aside Of Orders (mar 2020) (15 U.s.c. 644(r)). [] (19) 52.219-14, Limitations On Subcontracting (mar 2020) (15 U.s.c. 637(a)(14)). [] (20) 52.219-16, Liquidated Damages Subcontracting Plan (jan 1999) (15 U.s.c. 637(d)(4)(f)(i)). [] (21) 52.219-27, Notice Of Service-disabled Veteran-owned Small Business Set-aside (mar 2020) (15 U.s.c. 657f). [] (22)(i) 52.219-28, Post Award Small Business Program Rerepresentation (mar 2020) (15 U.s.c 632(a)(2)). [] (ii) Alternate I (mar 2020) Of 52.219-28. [] (23) 52.219-29, Notice Of Set-aside For, Or Sole Source Award To, Economically Disadvantaged Women-owned Small Business (edwosb) Concerns (mar 2020) (15 U.s.c. 637(m)). [] (24) 52.219-30, Notice Of Set-aside For, Or Sole Source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (mar 2020) (15 U.s.c. 637(m)). [] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (mar 2020) (15 U.s.c. 644(r)). [] (26) 52.219-33, Nonmanufacturer Rule (mar 2020) (15 U.s.c. 637(a)(17)) [] (27) 52.222-3, Convict Labor (june 2003) (e.o. 11755). [] (28) 52.222 19, Child Labor Cooperation With Authorities And Remedies (jan 2020) (e.o. 13126). [] (29) 52.222-21, Prohibition Of Segregated Facilities (apr 2015). [] (30)(i) 52.222 26, Equal Opportunity (sep 2016) (e.o. 11246). [] (ii) Alternate I (feb 1999) Of 52.222-26. [] (31)(i) 52.222 35, Equal Opportunity For Veterans (jun 2020) (38 U.s.c. 4212). [] (ii) Alternate I (july 2014) Of 52.222-35. [] (32)(i) 52.222 36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793). [] (ii) Alternate I (july 2014) Of 52.222-36. [] (33) 52.222 37, Employment Reports On Veterans (jun 2020) (38 U.s.c. 4212). [] (34) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). [x] (35)(i) 52.222-50, Combating Trafficking In Persons (jan 2019) (22 U.s.c. Chapter 78 And E.o. 13627). [] (ii) Alternate I (mar 2015) Of 52.222-50 (22 U.s.c. Chapter 78 And E.o. 13627). [] (36) 52.222-54, Employment Eligibility Verification (oct 2015). (e. O. 12989). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items Or Certain Other Types Of Commercial Items As Prescribed In 22.1803.) [] (37)(i) 52.223-9, Estimate Of Percentage Of Recovered Material Content For Epa-designated Items (may 2008) (42 U.s.c.6962(c)(3)(a)(ii)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.) [] (ii) Alternate I (may 2008) Of 52.223-9 (42 U.s.c. 6962(i)(2)(c)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.) [] (38) 52.223-11, Ozone-depleting Substances And High Global Warming Potential Hydrofluorocarbons (jun 2016) (e.o. 13693). [] (39) 52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners (jun 2016) (e.o. 13693). [] (40)(i) 52.223-13, Acquisition Of Epeatâ®-registered Imaging Equipment (jun 2014) (e.o.s 13423 And 13514). [] (ii) Alternate I (oct 2015) Of 52.223-13. [] (41)(i) 52.223-14, Acquisition Of Epeatâ®-registered Televisions (jun 2014) (e.o.s 13423 And 13514). [] (ii) Alternate I (jun 2014) Of 52.223-14. [] (42) 52.223-15, Energy Efficiency In Energy-consuming Products (dec 2007)(42 U.s.c. 8259b). [] (43)(i) 52.223-16, Acquisition Of Epeatâ®-registered Personal Computer Products (oct 2015) (e.o.s 13423 And 13514). [] (ii) Alternate I (jun 2014) Of 52.223-16. [x] (44) 52.223 18, Encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513). [] (45) 52.223-20, Aerosols (jun 2016) (e.o. 13693). [] (46) 52.223-21, Foams (jun 2016) (e.o. 13693). [] (47) (i) 52.224-3, Privacy Training (jan 2017) (5 U.s.c. 552a). [] (ii) Alternate I (jan 2017) Of 52.224-3. [] (48) 52.225-1, Buy American Supplies (may 2014) (41 U.s.c. Chapter 83). [] (49)(i) 52.225-3, Buy American Free Trade Agreements Israeli Trade Act (may 2014) (41 U.s.c. Chapter 83, 19 U.s.c. 3301 Note, 19 U.s.c. 2112 Note, 19 U.s.c. 3805 Note, 19 U.s.c. 4001 Note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. [] (ii) Alternate I (may 2014) Of 52.225-3. [] (iii) Alternate Ii (may 2014) Of 52.225-3. [] (iv) Alternate Iii (may 2014) Of 52.225-3. [] (50) 52.225 5, Trade Agreements (oct 2019) (19 U.s.c. 2501, Et Seq., 19 U.s.c. 3301 Note). [x] (51) 52.225-13, Restrictions On Certain Foreign Purchases (jun 2008) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). [] (52) 52.225 26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. 2302 Note). [] (53) 52.226-4, Notice Of Disaster Or Emergency Area Set-aside (nov 2007) (42 U.s.c. 5150). [] (54) 52.226-5, Restrictions On Subcontracting Outside Disaster Or Emergency Area (nov 2007) (42 U.s.c. 5150). [x] (55) 52.229 12, Tax On Certain Foreign Procurements (jun 2020). [] (56) 52.232-29, Terms For Financing Of Purchases Of Commercial Items (feb 2002) (41 U.s.c. 4505, 10 U.s.c. 2307(f)). [] (57) 52.232-30, Installment Payments For Commercial Items (jan 2017) (41 U.s.c. 4505, 10 U.s.c. 2307(f)). [x] (58) 52.232-33, Payment By Electronic Funds Transfer System For Award Management (oct 2018) (31 U.s.c. 3332). [] (59) 52.232-34, Payment By Electronic Funds Transfer Other Than System For Award Management (jul 2013) (31 U.s.c. 3332). [] (60) 52.232-36, Payment By Third Party (may 2014) (31 U.s.c. 3332). [] (61) 52.239-1, Privacy Or Security Safeguards (aug 1996) (5 U.s.c. 552a). [] (62) 52.242-5, Payments To Small Business Subcontractors (jan 2017)(15 U.s.c. 637(d)(13)). [] (63)(i) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (feb 2006) (46 U.s.c. Appx. 1241(b) And 10 U.s.c. 2631). [] (ii) Alternate I (apr 2003) Of 52.247-64. [] (iii) Alternate Ii (feb 2006) Of 52.247-64. (c) The Contractor Shall Comply With The Far Clauses In This Paragraph (c), Applicable To Commercial Services, That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Items: [] (1) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67). [] (2) 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). [] (3) 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards Price Adjustment (multiple Year And Option Contracts) (aug 2018) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). [] (4) 52.222-44, Fair Labor Standards Act And Service Contract Labor Standards Price Adjustment (may 2014) (29 U.s.c 206 And 41 U.s.c. Chapter 67). [] (5) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment Requirements (may 2014) (41 U.s.c. Chapter 67). [] (6) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services Requirements (may 2014) (41 U.s.c. Chapter 67). [] (7) 52.222-55, Minimum Wages Under Executive Order 13658 (dec 2015). [] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2017) (e.o. 13706). [] (9) 52.226 6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42 U.s.c. 1792). (d) Comptroller General Examination Of Record. The Contractor Shall Comply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of The Simplified Acquisition Threshold, As Defined In Far 2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At 52.215-2, Audit And Records Negotiation. (1) The Comptroller General Of The United States, Or An Authorized Representative Of The Comptroller General, Shall Have Access To And Right To Examine Any Of The Contractor's Directly Pertinent Records Involving Transactions Related To This Contract. (2) The Contractor Shall Make Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart 4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminated Shall Be Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Of Claims Arising Under Or Relating To This Contract Shall Be Made Available Until Such Appeals, Litigation, Or Claims Are Finally Resolved. (3) As Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e)(1) Notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1) In A Subcontract For Commercial Items. Unless Otherwise Indicated Below, The Extent Of The Flow Down Shall Be As Required By The Clause (i) 52.203 13, Contractor Code Of Business Ethics And Conduct (jun 2020) (41 U.s.c. 3509). (ii) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iii) 52.204 23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab And Other Covered Entities (jul 2018) (section 1634 Of Pub. L. 115 91). (iv) 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (aug 2019) (section 889(a)(1)(a) Of Pub. L. 115 232). (v) 52.219 8, Utilization Of Small Business Concerns (oct 2018) (15 U.s.c. 637(d)(2) And (3)), In All Subcontracts That Offer Further Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far 19.702(a) On The Date Of Subcontract Award, The Subcontractor Must Include 52.219 8 In Lower Tier Subcontracts That Offer Subcontracting Opportunities. (vi) 52.222-21, Prohibition Of Segregated Facilities (apr 2015). (vii) 52.222 26, Equal Opportunity (sep 2016) (e.o. 11246). (viii) 52.222 35, Equal Opportunity For Veterans (jun 2020) (38 U.s.c. 4212). (ix) 52.222 36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793). (x) 52.222 37, Employment Reports On Veterans (jun 2020) (38 U.s.c. 4212). (xi) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause 52.222-40. (xii) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67). (xiii)(a) 52.222-50, Combating Trafficking In Persons (jan 2019) (22 U.s.c. Chapter 78 And E.o. 13627). (b) Alternate I (mar 2015) Of 52.222-50 (22 U.s.c. Chapter 78 And E.o. 13627). (xiv) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment Requirements (may 2014) (41 U.s.c. Chapter 67). (xv) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services Requirements (may 2014) (41 U.s.c. Chapter 67). (xvi) 52.222-54, Employment Eligibility Verification (oct 2015) (e. O. 12989). (xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (dec 2015). (xviii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (jan 2017) (e.o. 13706). (xix)(a) 52.224-3, Privacy Training (jan 2017) (5 U.s.c. 552a). (b) Alternate I (jan 2017) Of 52.224-3. (xx) 52.225 26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. 2302 Note). (xxi) 52.226 6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42 U.s.c. 1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause 52.226-6. (xxii) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (feb 2006) (46 U.s.c. Appx. 1241(b) And 10 U.s.c. 2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause 52.247-64. (2) While Not Required, The Contractor May Include In Its Subcontracts For Commercial Items A Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. (end Of Clause) (xxiii) In Addition, The Following Clauses Shall Also Apply: 52.211-6 Brand Name Or Equal (aug 1999) (a) If An Item In This Solicitation Is Identified As Brand Name Or Equal, The Purchase Description Reflects The Characteristics And Level Of Quality That Will Satisfy The Government S Needs. The Salient Physical, Functional, Or Performance Characteristics That Equal Products Must Meet Are Specified In The Solicitation. (b) To Be Considered For Award, Offers Of Equal Products, Including Equal Products Of The Brand Name Manufacturer, Must (1) Meet The Salient Physical, Functional, Or Performance Characteristic Specified In This Solicitation; (2) Clearly Identify The Item By (i) Brand Name, If Any; And (ii) Make Or Model Number; (3) Include Descriptive Literature Such As Illustrations, Drawings, Or A Clear Reference To Previously Furnished Descriptive Data Or Information Available To The Contracting Officer; And (4) Clearly Describe Any Modification The Offeror Plans To Make In A Product To Make It Conform To The Solicitation Requirements. Mark Any Descriptive Material To Clearly Show The Modification. (c) The Contracting Officer Will Evaluate Equal Products On The Basis Of Information Furnished By The Offeror Or Identified In The Offer And Reasonably Available To The Contracting Officer. The Contracting Officer Is Not Responsible For Locating Or Obtaining Any Information Not Identified In The Offer. (d) Unless The Offeror Clearly Indicates In Its Offer That The Product Being Offered Is An Equal Product, The Offeror Shall Provide The Brand Name Product Referenced In The Solicitation. (end Of Clause) 52.217-6 - Option For Increased Quantity (mar 1989) the Government May Increase The Quantity Of Supplies Called For In The Schedule At The Unit Price Specified. The Contracting Officer May Exercise The Option By Written Notice To The Contractor Within One-hundred Eighty (180) Calendar Days Of Contract Conclusion. Delivery Of The Added Items, Not To Exceed 50% Of All Contract Line Items, Shall Continue At The Same Rate As The Like Items Called For Under The Contract, Unless The Parties Otherwise Agree. (end Of Clause) 852.212-72 - Gray Market And Counterfeit Items (mar 2020) (a) No Used, Refurbished, Or Remanufactured Supplies Or Equipment/parts Shall Be Provided. This Procurement Is For New Original Equipment Manufacturer (oem) Items Only. No Gray Market Items Shall Be Provided. Gray Market Items Are Oem Goods Intentionally Or Unintentionally Sold Outside An Authorized Sales Territory Or Sold By Non-authorized Dealers In An Authorized Sales Territory. (b) No Counterfeit Supplies Or Equipment/parts Shall Be Provided. Counterfeit Items Include Unlawful Or Unauthorized Reproductions, Substitutions, Or Alterations That Have Been Mismarked, Misidentified, Or Otherwise Misrepresented To Be An Authentic, Unmodified Item From The Original Manufacturer, Or A Source With The Express Written Authority Of The Original Manufacturer Or Current Design Activity, Including An Authorized Aftermarket Manufacturer. Unlawful Or Unauthorized Substitutions Include Used Items Represented As New, Or The False Identification Of Grade, Serial Number, Lot Number, Date Code, Or Performance Characteristics. (c) Vendor Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Equipment/system, Verified By An Authorization Letter Or Other Documents From The Oem. All Software Licensing, Warranty And Service Associated With The Equipment/system Shall Be In Accordance With The Oem Terms And Conditions. (end Of Clause) 52.252-2 - Clauses Incorporated By Reference (feb 1998) this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): http://www.acquisition.gov/comp/far/index.html (far) http://www.va.gov/oal/library/vaar/index.asp (vaar) (end Of Clause) 52.204-27 Prohibition On A Bytedance Covered Application (jun 2023) (a) Definitions. As Used In This Clause Covered Application Means The Social Networking Service Tiktok Or Any Successor Application Or Service Developed Or Provided By Bytedance Limited Or An Entity Owned By Bytedance Limited. Information Technology, As Defined In 40 U.s.c. 11101(6) (1) Means Any Equipment Or Interconnected System Or Subsystem Of Equipment, Used In The Automatic Acquisition, Storage, Analysis, Evaluation, Manipulation, Management, Movement, Control, Display, Switching, Interchange, Transmission, Or Reception Of Data Or Information By The Executive Agency, If The Equipment Is Used By The Executive Agency Directly Or Is Used By A Contractor Under A Contract With The Executive Agency That Requires The Use (i) Of That Equipment; Or (ii) Of That Equipment To A Significant Extent In The Performance Of A Service Or The Furnishing Of A Product; (2) Includes Computers, Ancillary Equipment (including Imaging Peripherals, Input, Output, And Storage Devices Necessary For Security And Surveillance), Peripheral Equipment Designed To Be Controlled By The Central Processing Unit Of A Computer, Software, Firmware And Similar Procedures, Services (including Support Services), And Related Resources; But (3) Does Not Include Any Equipment Acquired By A Federal Contractor Incidental To A Federal Contract. (b) Prohibition. Section 102 Of Division R Of The Consolidated Appropriations Act, 2023 (pub. L. 117 328), The No Tiktok On Government Devices Act, And Its Implementing Guidance Under Office Of Management And Budget (omb) Memorandum M 23 13, Dated February 27, 2023, No Tiktok On Government Devices Implementation Guidance, Collectively Prohibit The Presence Or Use Of A Covered Application On Executive Agency Information Technology, Including Certain Equipment Used By Federal Contractors. The Contractor Is Prohibited From Having Or Using A Covered Application On Any Information Technology Owned Or Managed By The Government, Or On Any Information Technology Used Or Provided By The Contractor Under This Contract, Including Equipment Provided By The Contractor S Employees; However, This Prohibition Does Not Apply If The Contracting Officer Provides Written Notification To The Contractor That An Exception Has Been Granted In Accordance With Omb Memorandum M 23 13. (c) Subcontracts. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (c), In All Subcontracts, Including Subcontracts For The Acquisition Of Commercial Products Or Commercial Services. (end Of Clause) in Addition, The Following Clauses And Provisions Shall Also Apply: 52.232-18 availability Of Funds (apr 1984) 52.233-1 disputes (may 2014) 52.233-3 protest After Award (aug 1996) 852.203-70 commercial Advertising (jan 2008) 852.232-72 electronic Submission Of Payment Requests (nov 2012) 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (oct 2016) 52.209-7 information Regarding Responsibility Matters (oct 2018) 52.233-2 service Of Protest (sept 2006) 852.233-70 protest Content/alternative Dispute Resolution (oct 2018) 852.252-70 solicitation Provisions Or Clauses Incorporated By Reference (jan 2008) 852.237-70 contractor Responsibilities apr 1984 852.215-70 service-disabled Veteran-owned And Veteran-owned Small Business Evaluation Factors jul 2016