Pumps Tenders

Details: Baa Amendment 3, 19 September 2023: this Is An Annual Notice Of An Open Baa As Required By Far 35.016. white Papers Are Still Being Accepted Against This Baa. Please See The Broad Agency Announcement, As Amended, For Specific Details On Submitting White Papers. this Amendment Encompasses The Following Changes: 1. Broad Agency Announcement (baa) a) Due To The Number Of Revisions In Amendment 3, Refer To The “tracked Changes” Version Which Is Provided For Ease Of Identifying The Specific Changes That Have Been Made Since The Previous Amendment. 2. Baa Attachments a) The Following Attachments Are Included In This Baa. Attachments Have Been Amended Or Added As Annotated In Bold Font. 1. Supplemental Instructions For Assistance Instrument Proposal (amended) 2. Model Assistance Instrument (amended) 3. Model Contract (amended) 4. Model Section K – Representations And Certifications (amended) 5. Model Section L – Instructions, Conditions, And Notices To Offerors (amended) 6. Proposal Adequacy Checklist (amended) 7. Contract Data Requirements List (cdrls) Dd Form 1423-1 (amended) 8. Statement Of Objectives (soo)(no Change) 9. Statement Of Work (sow) Supplemental Requirements (amended) 10. Standard Form (sf) 424 Form, Research And Related Senior/key Person Profile (expanded) Form (added) 11. Security Program Questionnaire (added) **the Government Is Providing A Model Contract And Model Assistance Agreement For Planning And Estimating Purposes Only. Each Award Will Be Tailored To Each Specific Proposal. The Attached Model Contract Is All-encompassing Of Multiple Types Of Contracts And Is Provided To Identify All Provisions And Clauses That May Be Included In Subsequent Awards. ------------------------------------------------------------------------------------------------------------------------------------ baa Amendment 2, 14 July 2023: call 1 To The Initial Baa Is Closed. As A Result Of The Issuance Of This Amendment, Objective 4: "expeditionary Medicine (em), Aim 2, Medical Logistics" Of The Baa Is Re-opened. All Areas Of The Statement Of Objectives Are Open. an Annual Update Is Forthcoming And Will Be Issued In A Subsequent Amendment. -------------------------------------------------------------------------------------------------------------------------------------- thisis Call 1, "joint Multi-channel Infusion Pump (jmcip)" To The Initial Broad Agency Announcement (baa), Fa8650-20-s-6008. This Is A Two-step Call For The Specific Research Objective 4, Expeditionary Medicine (em), Aim 2, Medical Logistics Of The Baa. Research Objective 4, Aim 2, Will Be Closed Off From The Open Baa Period Until Award Of The Resulting Proposal(s) From This Call. this Call Is Effective As Of The Date Of This Posting, 18 February 2022.white Papers Are Due No Later Than 5:00 P.m. Eastern Standard Time (est) On 10 March 2022.please Submit White Papers Via Email To The Contracting Pocs For The Call, Ms. Marina Schemmel At Marina.schemmel@us.af.mil And Ms. Kimberly Cerney At Kimberly.cerney@us.af.mil. technical Poc For This Call: Mr. Nathaniel Baldwin, Nathaniel.baldwin.1@us.af.mil contracting Pocs For This Call: Ms. Marina Schemmel, Marina.schemmel@us.af.mil And Ms. Kimberly Cerney, Kimberly.cerney@us.af.mil ________________________________________________________________________________________________________ the Warfighter Medical Optimization Division (rhm) Intends To Solicit White Papers Under This Announcement With The Focus Of Conducting Medical Research In Support Of Optimizing The Warfighter By Enabling, Enhancing, Restoring, And Sustaining The Airman To More Effectively Execute The Air Force Mission. This Medical Research Objective Is Dual Natured: (1) Ensure Medical Availability Of Airmen By Analyzing Attributes (sensory, Behavioral, Physiologic) And Operational Environments (chemical, Physical, Psychological, Biological, Radiological Stressors) To Drive Optimal Performance Of Airmen Engaged In High-demand, High-impact Mission Tasks (2) Investigate How The Flight Environment Affects The Process Of Life, The Ability To Maintain Homeostasis, And The Risk For Injury Or Secondary Insult, Seeking To Ameliorate These Stressors To Optimize Airman Health And Performance. this Baa Will Remain Open For Seventy-two (72)months With Calls Being Released Throughout The Seventy-two (72) Month Period Of Performance.

Details: Description Buildings: Construction – Low Rise - Concrete Cost Of Bidding Documents: Php 10,000.00 Source Of Funds: Fy 2025-dpwh Infrastructure Program Based On Nep The Significant Times And Deadlines Of Procurement Activities Are Shown Below: 1. Issuance Of Bidding Documents: November 15 - December 3, 2024, 8:30am 2. Pre-bid Conference Date & Time: November 21, 2024, 10:000 Am 3. Receipt Of Bids Deadline: December 3, 2024, 10:00 Am 4. Opening Of Bids Date & Time: December 3, 2024, 10:00 Am 5. Venue Of Activities Conference Hall, Cebu City District Engineering Office, V. Sotto St., Brgy. Tinago, Cebu City Prospective Bidders May Download The Bidding Documents (bds), If Available, At The Dpwh Website And At The Philippine Government Electronic Procurement System (philgeps). Bidders That Will Download Bd’s From The Dpwh Website Shall Pay The Said Fees As Stated Above On Or Before The Submission Of Their Bid Documents. The Bac Will Issue Hard Copies Of The Bds At The Same Address To Eligible Bidders Upon Payment Of A Fee Stated Above. The Interested Bidders For Project Number 3 Must Own Or Lease One (1) Unit Welding Machine (elect. Driven / Dc Output, 300amp), One (1) Unit Water Truck / Pump – 4,000l 360 Hp, And One (1) Unit Cargo / Service Truck 2-5mt, 270 Hp. Contractors / Applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. As Prescribed In Department Order No.3 Series Of 2015, The Deadline Of Submission Of Contractors Records To The Dpwh-civil Works Registry For Updating Is As Follows: A.) For Class “a” Documents And Financial Statements, Must Be Submitted At Least Seven (7) Calendar Days And B.) Technical Documents (completed / On-going Projects) At Least Fifteen (15) Calendar Days Before The Deadline For The Submission Or Opening Of Bids. Interested Bidders May Obtain Further Information And Inspect The Bidding Documents At The Same Address. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend And Late Bids Shall Not Be Accepted. Bid Submission Maybe Done Manually Or Electronically / Online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission Or At Electronicbids_cebucity@dpwh.gov.ph For Electronic Submission On Or Before The Deadline Stated Above. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. The Cebu City District Engineering Office Reserves The Right To Accept Or Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Hereby Incurring Any Liability To The Affected Bidders And No Responsibility To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. Approved: Sharinah A. Batocapala Bac Chairman Noted: Manolo B. Madronio, Jr. Oic-district Engineer

Details: Description National Irrigation Administration Davao Del Sur Irrigation Management Office Early Procurement Activities (epa) Repair/rehabilitation Of Supplementary Dam Of Badagoy Cis Cy 2025 The National Irrigation Administration-davao Del Sur Irrigation Management, Through The Fy 2025 National Expenditure Program (nep) Intends To Apply The Sum Of Four Million Seven Hundred Thirty Nine Thousand Eight Hundred Seventy Nine Pesos & 82/100 Only (php 4,739,879.82) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Epa Of Repair/rehabilitation Of Supplementary Dam Of Badagoy Cis Cy 2025, Lmc-ds-2025-01. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The National Irrigation Administration-davao Del Sur Irrigation Management Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 180 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From National Irrigation Administration-davao Del Sur Irrigation And Inspect The Bidding Documents At The Address Given Below From Monday To Friday (8:00 Am-5:00 Pm). A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 12-december 2, 2024 From Given Address And Website/s Below Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. The National Irrigation Administration-davao Del Sur Irrigation Management Will Hold A Pre-bid Conference On November 20, 2024 @ 9:00 O’clock In The Morning At Nia-davao Del Sur Irrigation Management Office, Conference Room, Lapu-lapu St., Digos City Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 2, 2024 @ 9:00 O’clock In The Morning. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On Before December 2, 2024 @ 9:30 In The Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Minimum Equipment Required: Trasit Mixer-2 Units, Boom Truck-1 Unit, Cargo Truck-1 Unit, Backhoe-1 Unit, Dumptruck-2 Units, Trailer Truck-1 Unit, Portable Batching Plant-1 Unit, One Bagger Concrete Mixer-1 Unit, Sheet Pile Drive–1 Unit, Water Pump–1 Unit, Utility Vehicle-1 Unit. The National Irrigation Administration-davao Del Sur Irrigation Management Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Sidney G. Rebosura Bac Secretariate Nia-davao Del Sur Irrigation Management Office Lapu-lapu St., Digos City, Davao Del Sur Email Add: R11.davaodelsur-imo@nia.gov.ph Tel. No. 237-6789 Engr. Jianel U. Masinadiong Bac Chairman

Details: Description 4 Pc Belt, B-type, B-63 780 2 Set Brake Pad, Front, Va-426 K, Left And Right (for Mitsubishi Canter-4d32 Engine) 1,850.00 2 Set "brake Shoe, Rear, Left And Right (for Mitsubishi Canter - 4d32 Engine)" 2,000.00 16 Pc Bushing, Spring, Front (for Mitsubishi Canter-4d32 Engine) 100 16 Pc Bushing, Spring, Rear (for Mitsubishi Canter-4d32 Engine) 100 14 Pc "clearance Lamp, (side Marker Light) Led Volts: 24v/12v 100% Brand New High Intensity Durable Energy Efficient Water-resistant Longer Lifespan Easy Installation Color: 2 Pc Amber, 3 Pcs Blue, 3pcs Green, 3 Red, And 3 White (for Mitsubishi Canter-4d32 Engine)" 500 1 Assy Clutch Booster, (for Mitsubishi Canter-4d32 Engine) 3,000.00 1 Pc "clutch Master Primary (right Ear For Copper Tube) Assy 7/8 (for Mitsubishi Canter-4d32 Engine)" 1,500.00 1 Pc "clutch Master, Secondary, 7/8 (for Mitsubishi Canter - 4d32 Engine)" 1,500.00 2 Bx Cross Bearing, Gum-93 Gmb Original (for Mitsubishi Canter-4d32 Engine) 850 3 Pc Filter Oil, C-305 (for Mitsubishi Canter-4d32 Engine) 450 3 Pc Filter Oil, C-503 (for Mitsubishi Canter-4d32 Engine) 450 2 Pc Filter, Air Element (for Mitsubishi Canter-4d32 Engine) 680 3 Pc Filter, Fuel (ff5052) 650 3 Pc Filter, Fuel (fs1280) 500 3 Pc Filter, Fuel, Fc-317 (for Mitsubishi Canter-4d32 Engine) 450 3 Pc Filter, Oil 91py162 Or Lf777 Cummins Oil Filter 700 10 Pc Hand Tractor Rotary Tiller Knife Single Hole Double Blade Hand (1cm Hole, 22.5cm Length) 450 1 Set "kit, King Pin, Left And Right (for Mitsubishi Canter-4d32 Engine) Chasis Nymber:fe 305b-547340" 3,000.00 5 Set "rubber Cup, Primary, 7/8 Repair Kit, Cap Type (for Mitsubishi Canter-4d32 Engine)" 50 8 Pc "rubber Cup, Rear Wheel Brake Cylinder 1-1/8, Cap Type (for Mitsubishi Canter-4d32 Engine)" 70 5 Set "rubber Cup, Secondary, 7/8 Repair Kit, Cap Type (for Mitsubishi Canter-4d32 Engine)" 50 2 Pc Shock Absorber, Fluid Type (for Mitsubishi Canter-4d32 Engine) 2,500.00 1 Assy "starter, 24v (for Mitsubishi Canter-4d32 Engine)" 7,000.00 1 Pc Starter, Solenoid, Actuator, Tp6500dgs 3,500.00 2 Assy "tail Lamp (for Mitsubishi Canter-4d32 Engine)" 1,500.00 1 Pc "water Pump Assembly (for Mitsubishi Canter - 4d32 Engine)" 3,000.00 2 Pr "wiper Blade, Mounting Type & Wiper Type (banana) (for Mitsubishi Canter-4d32 Engine) " 800 Awarding By Lot But Quotation Not To Exceed Line-item Abc Requirements: 1. Mayor's / Business Permit 2. Philgeps Reg. Number

Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Office Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Canal Structures Of Suague Ris Contract Ref. No. : Nia.igimo-resto-nis-suague Ris-cw02-25 Location : Mina, Iloilo Approved Budget For The Contract (abc) : Php 4,659,167.82 Contract Duration : 120 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Dump Truck 2 Unit – 1 Bagger Concrete Mixer 2 Unit – Concrete Vibrator 1 Unit – Water Truck 1 Unit – Backhoe 2 Unit – Water Pump (4” Dia.) 1 Unit – Plate Compactor Brief Description: Construction Of Canal Structures Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Five Thousand Pesos (php 5,000.00) To The Nia-igimo Cashier. Only Bidder’s Representative With The Special Power Of Attorney Or Board Secretary’s Certificate (if Corporation) Will Be Allowed To Purchase Bidding Documents And Upon Presentation Of Its Pcab License. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – December 2, 2024, 12:00 P.m. 2. Pre-bidding Conference – November 19, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – December 2, 2024, 2:00 P.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Joselito J. Depalubos Acting Section Chief O&m, Asbris & Sris Bac Chairman Noted: Randy C. Alipis, Mpa Division Manager A Head Of The Procuring Entity (hope) Date Of Posting: Philgeps – November 7 – December 2, 2024

Description: Contract notice – general guideline, standard rule, open procedure (construction work) Frankfurt – new Rebstockbad building The new Rebstockbad building in Frankfurt am Main is the most important swimming pool project within the framework of the Frankfurt 2025 swimming pool concept and, in addition to its function of providing regional services to the city of Frankfurt am Main, has the aim of creating a supra-regional appeal in the Rhine-Main area. The Rebstockbad is to become a showcase project in the swimming pool landscape. The wide-ranging needs when visiting a pool – from sporting aspects to the opportunity to spend free time with family and friends to health and wellness-oriented offers – are to be reflected in the profile of the new Rebstockbad. In addition to the external impact of the building, the primary project goal is to make the pool attractive for future users. Other key project goals are the energy and resource-saving, ecological and economical construction and operation of the Rebstockbad. This is to be ensured by an efficient, durable, sustainable, low-maintenance and easy-care construction. If you have any questions regarding the e-tendering platform Subreport Elvis, please contact: Stefan Ehl, Tel.: +49 (0) 221/9 85 78-58, Fax: +49 (0) 221/9 85 78-66, E-mail: stefan.ehl@subreport.de, Internet: www.subreport.de 9. For bidder communication (questions about the list of services or bidder questions of any kind), only the communication function via the tendering platform is to be used. In this case Subreport Elvis. VE 400.410 Lv Sanitary equipment - Approx. 4,050 m drinking water pipes made of stainless steel DN 12 - DN 100, including molded parts, fastening material and thermal insulation (aluminum-laminated mineral wool insulation with sheet metal jacket, PVC coating, pipe shells without coating and cold insulation made of synthetic rubber) - Approx. 380 m PE drain pipe, including molded parts and fastening material DN 50 - DN 150, including cold insulation made of synthetic rubber - Approx. 2,500 m soundproofed plastic drain pipe, including molded parts and fastening material DN 50 - DN 150 - 7 fresh water modules 70-120l, circulation circuit, charging and circulation pump, control - Approx. 125 shower panels, electronic including shower control and cabling, - Approx. 60 pcs. wall-hung toilets, as deep-flush basins, including wall-mounted elements, of which 7 are disabled toilets with folding support handles and electronic flush activation, - approx. 62 washbasin systems, including wall-mounted elements, of which 6 are disabled washbasins, - approx. 24 waterless urinals, including wall-mounted elements - 2 lifting systems including accessories - 1 grease separator including accessories - 2 pressure boosting systems including accessories - 1 water softening system including accessories - 1 pressure boosting system including accessories for fire extinguishing system - 29 wall hydrants including accessories - Preparation of inspection and documentation documents

Details: This Request For Proposals (the “rfp”) Is An Invitation By The University Of Ottawa (the “university”) To Prospective Proponents To Submit Proposals For An Oxygen Transmission Rate Measurement And Water Vapour Transmission Rate Measurement Systems, Funded By The Canada Foundation For Innovation And The Ontario Research Fund. Prospective Proponents Must Be Able To Supply Both Systems. The Deliverables The Proposed Equipments Are An Oxygen Transmission Rate Measurement System And A Water Vapour Transmission Rate Measurement System. Oxygen Transmission Rate Measurement System: Oxygen Transmission Rate (otr) Measurement Is To Quantify The Rate At Which Oxygen Permeates Through Target Materials, Typically Thin Polymeric Film, Containers, And Membranes. This Is A Critical Method In Academics And Industries Such As Textile, Pharmaceuticals, Nanocellulose, Food, And Health And Safety-related Wearable Applications, Maintaining Object Integrity And Extending Lifetime Under A Given Environmental Condition. The Requested Equipment Is An Advanced Oxygen Transmission Rate (otr) Measurment System To Support Our Research And Development In Functional Thin Film Analysis. This Equipment Will Enable Us To Accurately Assess The Oxygen Permeability Of Various Thin Films, Including Polymer, Nanocellulose, And Ultrathin Metallic Films, Providing Critical Analysis To Understand The Interface Between Multi-stack Films In The Then-nanometer Range. Significantly, The Center For Hybrid Interfaces And Intelligent Thin-films (hiit) Is A Partnership Between Academia And Industry To Bring Transformational Advances In Hybrid Thin Films And Devices And Convergence With More Established Technologies Such As Bulk Semiconductors. Both Uottawa And Industrial Partners Will Benefit From Otr Measurement, Where Controlling Oxygen Permeation Is Critical To Maintaining Product Integrity, Ensuring That We Can Optimize And Develop Materials That Provide Ideal Barrier Properties Against A Given Environmental Condition. With Growing Environmental Concerns, Ort Measurement Will Help Us Establish Eco-friendly Packaging Materials That Balance Required Oxygen Barrier Performance With Sustainability. Water Vapour Transmission Rate Measurement System: A Water Vapour Transmission Rate (wvtr) Measurement System Evaluates The Rate At Which Water Vapor Permeates Through A Material, Especially Films Or Membranes, Under Temprature And Humidity Conditions. This Measurement Is Essential For Materials Used In Packaging, Pharmaceuticals, And Electronics, And Moisure Barrier Properties Are Critical To Maintaining The Integrity And Lifetime Of Devices. The Requested Equipment Is A Precise Water Vapor Transmission Rate (wvtr) Measurement. This System Is For Testing The Permeability Of Materials To Water Vapour. Wvtr Measurement Is Critical For Engineering Fields, Including Electronics, Packaging, And Pharmaceuticals, Where Controlling Moisture Levels Is Essential For Thin Film Quality, Safety, And Longevity. Wvtr System Will Provide Accurate, Reliable, And Repeatable Testing Results, Ensuring That Deposited Films Meet Required Standards And Performance Criteria, Which Is Well Aligned With The Objectives Of Center For Hybrid Interfaces And Intelligent Thin-films (hiit) Objectives. Understanding The Interactions Between Thin Films Of Various Hybrid Materials, Such As Organic-inorganic, Organic-metal, And High Throughput, Low-cost, And Low-power Consumption Roll-to-roll (r2r) Manufacturing Approaches Will Offer Canada And The World Revolutionary Innovations In Technology That Will Bring Tremendous Positive Economic, Health, Social, And Environmental Impacts. Innovations Include; (i) The Realization Of Low-cost Intelligent Labels That Detect Water Permeation Through The Film, (ii) Biometric Sensors Integrated Into Textiles That Can Identify Disease In Human Sweat For Early Detection And Prevention, And More. Under This Scope, Measuring The Water Permeation Through Thin Films, Interfaces, And Packaging Is Essential To Hiit Research. Mandatory Technical Requirements - Oxygen Transmission Rate Measurement System: 1.0 - Oxygen Transmission Rate Measurement System 1.1 - The Instrument Must Comply With International Standards, Such As Astm, Iso, Or Equivalent Standards. 1.2 - The Instrument Must Have An Automatic Calibration Protocol With Nist-traceable Calibration Standards Or Equipped With Automatic Calibration Sensors. 1.3 - The Instrument Must Provide Capabilities To Test Variety Of Samples Including But Not Limited To Thin Films, Polymers, Textiles, And Papers 1.4 - The Instrument Must Have An Ultra-high Barrier Testing Capability For Oxygen Permeation By A Detector Based On Coulometric Sensing (faraday Law Operation Principles). 1.5 - The Instrument Must Be Capable To Operate In A Higher Temperature Than 30oc. 1.6 - The Operating Temperature Range Must Have An Error (fluctuation) Of No More Than ±1oc. 1.7 - The Machine Must Allow For Fully Automated Testing, Including Vacuum/purging, Excluding Sample Loading. 1.8 - The Instrument Must Allow The Measurement Of Samples Having An Area Ranging From 5 Cm2 To 30 Cm2. 1.9 - The Instrument Must Provide No Less Than 2 Cells Per Cartridge. 1.10 - The Test Range On The Large Samples (30 Cm2 Or Larger) Must Be Better Than 0.005 -150 (cc/m2.day), And 0.05-1000 (cc/m2.day) For The Smallest Samples. 1.11 - The Resolution Of The Instrument Must Be Better Than 0.0005 Cc/(m2.day) 1.12 - The Repeatability Of The Instrument Must Be Better Than 0.005 Cc/(m2.day) Or 98%. 1.13 - The Instrument Must Be Bench Top And Dimensions Should Not To Exceed 1 M (h) X 1 M (w) X 0.75 M (d) And Cannot Weigh More Than 100 Kg. 2.0 - Connected Accessories 2.1 - If An External Vacuum Pump Is Needed, It Must Be Capable Of Achieving Less Than 2 Torr And Included With The System. 3.0 - Warranty, Installation, And Training 3.1 - Must Include 1-year Standard Manufacturer’s Warranty And Technical Support (on-site, Emails And Phone Calls). 3.2 - Must Include On-site Installation And Training. Supplier Must Agree To Video-recording Of The Training Session(s) For The Purpose Of Future Users’ Trainings. Mandatory Technical Requirements - Water Vapour Transmission Rate Measurement System: 1.0 - Water Vapour Transmission Rate Measurement System 1.1 - The Machine Must Comply With International Standards, Such As Astm, Iso, Or Equivalent Standards 1.2 - The Machine Must Have An Automatic Calibration Protocol With Nist-traceable Calibration Standards Or Equipped With Automatic Calibration Sensors. 1.3 - The Instrument Must Provide Capabilities To Test Variety Of Samples Including But Not Limited To Thin Films, Polymers, Textiles, And Papers. 1.4 - The Instrument Must Be Capable To Operate In A Higher Temperature Than 30oc 1.5 - The Operating Temperature Range Must Have An Error (fluctuation) Of No More Than ±5oc. 1.6 - The Carrier Gas For The Instrument Must Be Dry Nitrogen. 1.7 - The Instrument Must Accommodate Sample Dimensions Varying In Area From 5 Cm2 To 30 Cm2. Larger Sample Test Capability Is Acceptable. 1.8 - The Instrument Must Provide No Less Than 2 Cells Per Analyzer, And A Separate Film Cartridge 1.9 - The Resolution Of The Instrument For Large Samples Must Be Better Than 0.005-1 G/m2/day 1.10 - The Resolution Of The Instrument For Smaller Samples Must Be Better Than 0.0005 G/m2/day 1.11 - The Instrument Must Be Bench Top And Dimensions Should Not Exceed 1 M (h) X 1 M(w) X 0.75 M(d), And Cannot Weigh More Than 100 Kg 1.12 - The Instrument Must Come With A Real-time Data Logging Software With Data Export Capabilities At Least One Of Csv, Excel, Pdf, And Txt Formats. 2.0 - Connected Accessories 2.1 - If An External Vacuum Pump Is Needed, It Must Be Capable Of Achieving Less Than 2 Torr And Included With The System. 3.0 - Warranty, Installation, And Training 3.1 - Must Include 1-year Standard Manufacturer’s Warranty And Technical Support (on-site, Emails And Phone Calls). 3.2 - Must Include On-site Installation And Training. Supplier Must Agree To Video-recording Of The Training Session(s) For The Purpose Of Future Users’ Trainings.

Description: Eips Is Looking To Reduce Toxins And Hazardous Materials In Cleaning And Disinfecting Supplies To Reduce Air And Water Pollution And To Protect Human Health And Safety In Learning And Workplace Environments. To Assist With Leed Requirements, Taking Into Consideration Performance And Cost, Eips Is Looking To Purchase Products Which Have The Least Adverse Impact On Health And The Environment. As Such, Eips Is Looking To Purchase Safe Products That Are: - Produced From Re-cycled Materials, Have Minimal Adverse Effect On Human Health, Conserve Natural Resources And Reduce Waste; - Third Party Certified Products That Are Certified Through Ul Ecologo, And Or Green Seal Will Be Given Consideration; And - Products Which Are Greenguard Gold Certified Are Preferred. Cleaning/disinfecting Products: - Preference Is For Hydrogen Peroxide Based Chemical Products; - Preference Is For An All-in-one Cleaner/disinfectant; - Disinfectants Must Be Approved By Health Canada, Have A Drug Identification Number (din) And A Broad-spectrum Virucidal Claim Or A Virucidal Claim Against Non-enveloped Viruses Or Coronaviruses; - Should Have A Kill Time Of Five Minutes Or Less Against Strains Of Sars-cov-2(covid-19); - Must Be Dilutable (concentrate Format) – No Ready To Use Products (rtu); - Must Have No Or Low Voc Claim; - Should Have Virucide, Bactericide, Fungicide And Mildewcide Properties; - Should Meet Bloodborne Pathogen Standards For Decontaminating Blood And Bodily Fluids; - Organic Ingredients In The Product Should Be Readily Biodegradable In Accordance With Oecd301 Standard; - Preference For Products That Are Ahp(r) – Actively Will Break Down Into Water And Oxygen After Use - Preference For Fragrance-free Products; - Should Have A Low Or No Voc Claim; - Preference For Products That Contains No Phosphorous Or Nonylphenol Ethoxylate (npe) Detergents; - Should Be Able To Be Diluted With Cold Water; And - Preference For Products That Do Not Require Ppe When In Diluted Form. Bathroom Cleaners: - Preference For Products That Can Effectively Clean Toilet Bowls, Urinals, And Porcelain Sinks; - Must Be Mild All-purpose Cleaners Which Will Not Damage Porcelain, Metal, Countertops And Tiles; - Should Be Effective To Clean And De-scale To Remove Hard Water Deposits, Soap Scum And Urine Salts - Should Be Fragrance Free; - Must Have No Or Low Voc Claim; - Must Be Phosphate Free; - Must Not Cause Harm To Plumbing Systems; And - Organic Ingredients In The Product Should Be Readily Biodegradable In Accordance With Oecd301 Standard. Heavy Duty Degreaser: - Should Be Able To Effectively Remove Grease, Grime, Oily Residue And Other Difficult To Remove Materials; - Must Be Safe To Use On Floors, Walls, Ceramic, Plastic, Metal And Concrete; - Must Have A No Or Low Voc Claim; And - Should Be Fragrance-free. Graffiti Remover: - Should Be Preferably Formulated With Ingredients That Are Biodegradable; - Should Have A Low Voc Claim; - Should Be Able To Efficiently Remove Spray Paint, Ink, Permanent Markers And Other Hard To Remove Substances From Interior And Exterior Surfaces; And - Should Not Cause Damage To School Contents Such As Desks, Counter Tops, Metal Lockers, Ceramic Walls, Painted Drywalls, Cement, Brick, Walls, And Metal Lockers. Floor Wax: - Should Be An Environmentally Formulated Sealer Finish Which Produces A Noticeable Gloss; - Should Dry To A Smooth, Hard, Clear And Colorless Coating Within 30-40 Minutes; - Should Be Easy To Re-coat And Should Be Quick To Remove Coats; - Should Be Safe For Most Resilient Hard Surface Flooring Including Vinyl Composition, Linoleum, Terrazzo, And Quarry Tile; - Should Be Durable For Heavy Foot Traffic; And - Should Not Contain Materials Harmful For The Wastewater Treatment Systems Such As Heavy Metals Or Zinc. Floor Stripper: - Should Quickly And Effectively Remove Wax; - Should Have A Low Voc Claim; - Should Not Contain Any Butyl, Phosphate Or Ammonia; And - Must Not Cause Damage To Vinyl Composition, Linoleum, Terrazzo, And Quarry Tile. Carpet Cleaner: - Should Be Conducive For Carpet Extraction, Bonnet Cleaning, And Carpet Spot Stain Remover; - Should Be Able To Removal Soils Without Causing Harm To The Carpet; - Should Be Able To Effectively Removal Salts And Ice-melt Staining From Entrance Matting; - Should Be Fragrance Free; And - Should Be Able To Be Used With Cold Water. Odor Eliminator/cleaner: - Should Be Highly Concentrated, And Contain Microbial Enzyme Producing Bacteria And Odor Counteractants; - Should Be Effective To Treat Grout, Urinals, Drains, Showers And Surface Areas Of Locker Rooms; - Should Be Able To Treat Fats, Grease And Deposits In Grout And Floors Commercial Kitchens; And - Should Be Effective For Use On Carpets. Hand Soap: Eips Is Interested In Hand Soap That Is Gentle, Dermatologist Tested, Hypoallergenic, Fragrance And Dye Free, Ph-balanced And Triclosan-free. The Re-fill Cartridges Should Be 100% Recyclable, Allow For At Least 99% Of The Product To Be Used Up And Be Designed For Heavy Use. The Refill Cartridges Should Be Designed To Be Sealed So-as-to Reduce The Risk Of Cross Contamination And Should Be Designed To Not Allow For Dripping To Ensure That Counters Remain Clean. Hand Sanitizer And Dispensers: - Must Be Soapopular Brand, Alternatives Will Not Be Considered; And - Must Be Non-alcohol Foaming. Paper Products – Toilet Paper And Paper Towel: - Should Be At Minimum, Green Seal Standard Gs-1 Certified; - Should Be Coreless Paper Towel And Toilet Paper; - Should Be Ul Ecologo Certified; And - Should Contain At Least 25% Post-consumer Recycled Material. Garbage Bags: - Preference: 100% Degradable, Made Of 100% Re-cycled Plastic, 100% Recyclable Product; - Compostable Bags Must Be Tested According To The Requirements Of Astm 6954-04; And - Product Does Not Create Or Release Methane Gas. Ice Melt: - Preference Is For A Product That Is Not Harmful To Vegetation – Will Not Damage Grass, Trees And Shrubs - Is Safe For Children And Pets; - Should Be Comprised Of An Anti-corrosion Formula To Reduce Damage To Vehicles, Equipment And Other Metals; - Should Be Comprised Of Formulations Which Will Minimize Damage To Wood And Concrete; - Should Be Non-tracking To Help Protect Carpets And Flooring; - Should Be Easy To Use – No Ppe Required For Application; And - Should Be Fast Acting. Packaging: - Should Be Designed To Reduce Waste; And - Should Be 100% Recyclable. Dispensers: - All Paper Towel And Soap Dispensers Are To Be Provided (in Bulk Quantities) At No Cost To Eips For The Initial Install And Throughout The Duration Of The Contract When Required; - All Dispensers Should Be Constructed Of Strong Durable Material Which Are Designed For Heavy Usage; - Should Have A Low Maintenance Design To Ensure Easy To Maintain, Clean, And Have A Window To Check Quantity Capacity; - Toilet Paper Dispensers Should Be Stainless Steel, Double Capacity Featuring An Automatic Drop Down To Ensure Continuous Supply, And Be Able To Support Coreless Toilet Paper Rolls; - Should Be High Capacity To Minimize Refill Frequency; - Should Be Easy To Refill To Maximize Efficiency; - Soap And Paper Towel Dispensers Must Be Manual; - Dispensers Which Are Hard Wired Or Require Batteries Will Not Be Considered; - Paper Towel Dispensers Must Have A Manual Feed Wheel Which Does Not Allow For The Paper To Go Back Up Into The Unit; - Paper Towel Dispensers Should Have A Front Pump Bar Or Wheel To Effectively Pull-down Paper. Slide Turn Wheels Which Have A Low Profile Are Not Preferred; - Soap Dispensers Should Allow For Portion Control Settings; Chemical Dispensing Systems For The Cleaning Supplies Should Allow For Multiple Chemicals To Be Housed In Lockable Cabinet; 1. The Cabinet Unit Should Be Equipped With A Selector Valve To Easily Change From Each Different Product. The Unit Should Have The Capability To Dispense Product Into Buckets Or Spray Bottles At The Correct Dilution Ratio; 2. The Chemical Dispensing Hose Should Be At A Minimum Of 8 Feet In Length And Should Have A Pull Trigger Handle To Start And Stop At The Desired Fill Level; 3. The Chemical Dispensing Unit Should Be Water Valve Operated, Filling Both Buckets And Water Bottles From The Same Chemical Port; 4. The Chemical Dispensing Unit Should Be Equipped With Back Flow Preventers Inside The Unit That Comply With Csa B64.10; 5. Maintenance Free Chemical Dispensing Systems Are Required For Commercial Kitchen Areas For 2-3 Compartment Size Sinks; 6. The Dispensing System Must Automatically Dispense The Correct Amount Of Chemical Based On The Water Flow; - Components And Parts Must Be Readily Available; And - Contractor Is Required To Perform All Necessary Repairs In A Timely Manner Without Incurring Any Costs To Eips. Glass Cleaner: - Should Be Non-ammoniated, Non-streaking And Quick Drying; And - Should Be Safe To Use On Stainless Steel, Chrome, And Washable Surfaces.

Details: Description Invitation To Bid Procurement Of 20,000 Liters Diesel Fuel Under Purchase Request No. 2870-24 1. The Provincial Government Of Misamis Oriental, Through The Peo-gasoline, Oil & Lubricants Intends To Apply The Sum Of One Million Five Hundred Thousand Pesos (php1,500,000.00) Being The Abc To Payments Under The Contract For The Supply And Delivery Of The Following: 1. Diesel Fuel 20,000 Liters Note: Payment Will Be Base On The Pump Price At The Time Of Actual Dispensing. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening 2. The Provincial Government Of Misamis Oriental Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 60 Calendar Days. Bidders Should Have Completed, Within 2 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Bids And Awards Committee Thru The Bac Secretariat At The Procurement Unit, Capitol Building, Cagayan De Oro City And Inspect The Bidding Documents At The Address Given Below During [8:00am-5:00 Pm]. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On [november 21, 2024 To December 11, 2024; 8:00am-3:00pm] From The Given Address Bids And Awards Committee Thru The Bac Secretariat At The Procurement Unit, Capitol Building, Cagayan De Oro City And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of [php5,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment. 6. The Pgmo Through Its Bids And Awards Committee Will Hold A Pre-bid Conference On November 28, 2024 At 10:30 Am., Bids And Awards Committee Office, Conference Room, 2nd Flr., Capitol Bldg., Velez St., Cagayan De Oro City, Misamis Oriental, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Bids And Awards Committee Office, Conference Room, 2nd Floor, Capitol Building, Cagayan De Oro City. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Submission Of Bids Shall Be On December 12, 2024; 8:00am-10:00am And Bid Opening Shall Be On December 12, 2024; 10:30am At The Given Address Bids And Awards Committee Office, Conference Room, 2nd Floor, Capitol Building, Cagayan De Oro City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Misamis Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Jacquiline M. Noble Head, Bac Secretariat C/o Procurement Unit Capitol Building Cagayan De Oro City. Bacmisamisoriental@gmail.com Www.misamisoriental.gov.ph Sgd Filemon R. Aguilar, Jr. Bac, Chairman

Details: Description Item No. Unit Item Description 1 Set Piston Assembly (for Daewoo Skt 684) 2 Set Piston Ring (for Daewoo Skt 684) 3 Set Overhauling Gasket(for Daewoo Skt 684) 4 Set Con Rod - Std (for Daewoo Skt 684) 5 Set Liner Oring (for Daewoo Skt 684) 6 Set Liner(for Daewoo Skt 684) 7 Pcs Gasket Cement 8 Set Grinding Compound(for Daewoo Skt 684) 9 Pcs Push Rod Tube (for Daewoo Skt 684) 10 Pcs Silicon Gasket (for Daewoo Skt 684) 11 Set Liner (hino) 12 Set Piston Ring Std.(hino) 13 Set Piston(hino) 14 Set Conrod Bearing(hino) 15 Set Overhauling Gasket (hino) 16 Set Silicon(hino) 17 Pcs Sand Paper #120(hino) 18 Pcs Sand Paper #1000 19 Pc Oil Filter C602a(hino) 20 Pcs Release Bearing (daewoo) 21 Pc Clutch Lining Rebonding (daewoo) 22 Pcs Quick Release Copling(daewoo) 23 Pc Battery -nrt (66l43) 24 Box Vulcanizing Patch #1 (dumptruck) 25 Box Vulcanizing Patch #3 (dumptruck) 26 Box Vulcanizing Patch #4(dumptruck) 27 Pcs Relay 12v(dumptruck) 28 Can Kwik 80l 250ml 29 Pc Center Bearing (daewoo) 30 Pcs Fuel Filter (dt Sha-260) 31 Pcs Hydraulic Hose Assembly(daewoo) 32 Set King Pin Kit Ho7d9(ud) 33 Pc Leaf Spring(ud) 34 Pcs Cross Joint (ud) 35 Pcs Center Bolt (ud) 36 Pcs Bolt W/ Lock Washer (ud) 37 Set The Rod End(hino) 38 Pcs Hub Oil Seal ( Sen 109) 39 Box Rubber Boots (sen 109) 40 Pcs Tire Tube 12x16.5(backhoe) 41 Pc Hydraulic Hose Assembly (1 1/4 X 4ply) 42 Pcs Battery 21 Plates (backhoe) Long Arm 43 Pcs Battery 11 Plates 44 Pc Hydraulic Hose Assembly 3/8 X 19" (grader) 45 Pc Hydraulic Hose Assembly 3/8 X 27' (grader) 46 Pc Ignition Switch (grader) 47 Roll Auto Wire #16 (grader) 48 Roll Auto Wire # 14(grader) 49 Pcs Electrical Tape (grader) 50 Pcs Battery N60 (volvo Long Arm) 51 Pcs Belt B42 Grove Volvo Long Arm) 52 Set Alternator Assembly (grader) 53 Pc Hydraulic Hose Assembly (xcmg Backhoe) 54 Pc Hydraulic Hoop Assembly (xcmg Backhoe) 55 Gal Rubberized Coat(black) - Sen 109 56 Gal Acrylic (black)- Sen 109 57 Gal Enamel (black)- Sen 109 58 Pc Hydraulic Hose Assembly 1/2 X Ply 59 Pc Hydraulic Hose Assembly 1/4 X 2 Ply 60 Pcs Hydraulic Boom Hose 61 Pcs Packing Seal Kit 62 Pc Hydraulic Hose Assembly 4 Ply 44' -long Arm Backhoe 63 Pcs Bolt 18mm X 8' With Nut Washer- Long Arm Backhoe 64 Pcs Bolt 18mm X 6' With Nut Washer- Long Arm Backhoe 65 Pcs Battery 19 Plates - Grader 66 Pcs Pump Belt B'45- Mini Dt 67 Pcs Bearing Inner/ Outer- Mini Dt 68 Pcs Oil Seal- Mini Dt 69 Pcs Bearing 303121r- Loader 70 Pc Hydraulic Hose Assembly- 3/4 X 4 Ply 11.5 Ft. -grader 71 Pcs Tail Light Assembly - Daewoo 72 Pcs Clearance Light - Daewoo 73 Pcs Fabricated Hose Aps- Daewoo