Pumps Tenders

Details: Description The City Government Of Davao Now Invites Bidders For The Projects Under Batch 13-2024 As Listed Below. The Prospective Bidder Must Have Completed A Single Largest Contract Cost (slcc) That Is Similar To The Contract To Be Bid, And Whose Value, Adjusted To Current Prices Using The Psa Consumer Price Indices, Must Be At Least Fifty Percent (50%) Of The Abc To Be Bid: Provided, However, That Contractors Under Small A And B Categories Without Similar Experience On The Contract To Bid May Be Allowed To Bid If The Cost Of Such Contract Is Not More Than The Allowable Range Of Contract Cost (arcc) Of Their Registration Based On The Guidelines As Prescribed By The Pcab And Section 23.4.2.4 Of The 2016 Revised Irr Of Ra 9184 Updated As Of April 15, 2024. Moreover, A Contract Shall Be Considered "similar" To The Contract To The Bid If It Has The Same Major Categories Of Work. B13-2024-01 Project Title: Road Opening With Concreting Located At Purok Pag-ibig, Purok Salome, Purok Masaya To Purok Pagbabago, Brgy. Saloy, Calinan District (phase 2) Source Of Fund: Adf, Cy 2024 (24102) Approved Budget For The Contract: Php 160,000,000.00 Project Duration: 540 Calendar Days Pcab License: Road Medium B Cost Of Tender Documents: Php 50,000.00 Minimum Equipment Requirements: 1 Unit Hydraulic Excavator (0.80 Cu.m) 1 Unit Concrete Mixer (1-bagger) 1 Unit Bulldozer, D6h Series Ii Psds/dd 1 Unit Concrete Vibrator 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Saw 1 Unit Vibratory Roller (10mt), Sd100dc 1 Unit Handroller Vibratory 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Bar Cutter 1 Unit Hydraulic Excavator (0.80 Cu.m) W/ Breaker 2 Units Chainsaw 1 Unit Boomtruck 1 Unit Water Truck 1 Unit Payloader 1 Unit Tm Crane 86 Units Steel Forms 1 Unit Generator Set 1 Unit Vibratory Hammer B13-2024-02 Project Title: Construction Of Farm To Market Road From Purok 8 Gulansing To Sitio Kinse-kinse Proper, Brgy. Salapawan, Paquibato District Source Of Fund: Adf Cy 2024 (24094) Approved Budget For The Contract: Php 130,000,000.00 Project Duration: 540 Calendar Days Pcab License: Road Medium A Cost Of Tender Documents: Php 50,000.00 Minimum Equipment Requirements: 1 Unit Hydraulic Excavator (0.80 Cu.m) 1 Unit Payloader 1 Unit Bulldozer, D6h Series Ii Psds/dd 88 Units Steel Forms 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Mixer (1-bagger) 1 Unit Vibratory Roller (10mt), Sd100dc 1 Unit Concrete Vibrator 1 Unit Hydraulic Excavator (0.80 Cu.m) W/ Breaker 1 Unit Concrete Saw 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Handroller Vibratory 1 Unit Dumptruck 10 Cu.m Cap. 1 Unit Bar Cutter 1 Unit Boomtruck B13-2024-03 Project Title: Road Concreting With Drainage System From P-8 Puting Bato To Sitio Namnam, Brgy. Baganihan, Marilog District (with 2 Bridge Component) Source Of Fund: Adf , Cy 2024 (24104) Approved Budget For The Contract: Php 65,000,000.00 Project Duration: 300 Calendar Days Pcab License: Road/ Flood Control Medium A Cost Of Tender Documents: Php 50,000.00 Minimum Equipment Requirements: 88 Units Steel Forms 1 Unit Water Truck 1 Unit Bulldozer, D6h Series Ii Psds/dd 2 Units Concrete Mixer (1-bagger) 1 Unit Hydraulic Excavator (0.8 Cu.m) 1 Unit Concrete Vibrator 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Saw 1 Unit Vibratory Roller (10mt), Sd100dc 1 Unit Handroller Vibratory 2 Units Dumptruck (12 Cu.yd) 1 Unit Bar Cutter 1 Units Payloader (1.5 Cu. M) B13-2024-04 Project Title: Road Concreting And Drainage System At Purok 1-c, Brgy. Talomo River, Calinan District Source Of Fund: Df, Sb1, Cy 2023 (23250) Approved Budget For The Contract: Php 30,000,000.00 Project Duration: 240 Calendar Days Pcab License: Road/ Flood Control Medium A Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Jackhammer W/ Air Compressor 1 Unit Handroller 1 Unit Dumptruck 5 Cu.m. 1 Unit Concrete Vibrator 1 Unit Backhoe Pc - 60 1 Unit Concrete Saw 1 Unit 10w Dumptruck 1 Unit Bar Cutter 1 Unit Road Grader 88 Units Steel Forms 1 Unit Road Roller 1 Unit One Bagger Concrete Mixer 1 Unit Payloader B13-2024-05 Project Title:construction Of Farm To Market Road At Purok Olaniag To Purok Kibilog, Brgy. Mapula, Paquibato District (phase 3) Source Of Fund: Adf Cy2024 (24095) Approved Budget For The Contract: Php 24,000,000.00 Project Duration: 300 Calendar Days Pcab License: Road Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Water Truck/pump (16000l) 1 Unit Chainsaw 2 Units Handroller 2t Vibratory 1 Unit Hydraulic Backhoe (0.80 Cu.m.) 2 Units Concrete Vibrator 1 Unit Bulldozer, D6h Series Ii Psds/dd 2 Units Concrete Saw 1 Unit Dumptruck (12 Cu.yd) 2 Units Bar Cutter 1 Unit Backhoe Pc-60 176 Units Steel Forms 1 Unit Motorized Road Grader (140hp), G710a 1 Unit Concrete Mixer (one Bagger) 1 Unit Vibratory Roller (10mt), Sd100dc B13-2024-06 Project Title: Road Concreting At Purok 4 Sitio Magsaysay, Brgy. Catigan, Toril District Source Of Fund: Df, Sb No. 1, Cy 2024 (24199) Approved Budget For The Contract: Php 17,000,000.00 Project Duration: 180 Calendar Days Pcab License: Road Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 2 Units Backhoe Pc-30 1 Unit Handroller, 2t, Vibratory 2 Units Dumptruck 5 Cu.m. Cap. 1 Unit Concrete Vibrator 1 Unit Road Grader 1 Unit Concrete Saw 1 Unit Road Roller, Vibratory 4 Units Bar Cutter 1 Unit Mini Dumptruck 102 Units Steel Forms 1 Unit Water Truck/pump (16000l) 1 Unit One Bagger Concrete Mixer B13-2024-07 Project Title: Construction Of Wastewater Treatment Facility For Marilog District Hospital, Brgy. Marilog Proper, Marilog District Source Of Fund: Adf Cy 2024 (24132) Approved Budget For The Contract: Php 15,000,000.00 Project Duration: 180 Calendar Days Pcab License: Gb-3 Water Treatment Plant & System Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc-30 1 Unit Cut-off Machine 1 Unit Mini Dump Truck 1 Unit Concrete Mixer ( 1-bagger) 1 Unit Plate Compactor 8 Units H-frame With Cross Bracing & Joint Pin 1 Unit Concrete Vibrator 2 Units Welding Machine 1 Unit Pumpcrete 2 Units Electric Grinder B13-2024-08 Project Title: Road Construction At Purok 1, Purok 2 And Purok 9, Brgy. Buda, Marilog District (phase 1) Source Of Fund: Df, Sb No. 1, Cy 2024 (24196) Approved Budget For The Contract: Php 14,250,000.00 Project Duration: 120 Calendar Days Pcab License: Road Small B Cost Of Tender Documents: Php 25,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc-60 1 Unit Water Truck 1 Unit Bulldozer 1 Unit Concrete Vibrator 1 Unit Hydraulic Excavator (crawler) 1 Unit Concrete Saw 1 Unit Road Grader 84 Units Steel Forms 1 Unit Road Roller 1 Unit One Bagger Concrete Mixer 2 Units Dump Truck 1 Unit Electric Drill 1 Unit Chainsaw 1 Unit Bar Cutter 2 Units Payloader (1.50 Cu.m.) B13-2024-09 Project Title: Construction Of Perimeter Fence At Tagakpan Elementary School, Purok San Francisco, Tagakpan, Tugbok District, Davao City Source Of Fund: Sef 2024 (3321-a) Approved Budget For The Contract: Php 9,500,000.00 Project Duration: 240 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php10,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc – 35 1 Unit Concrete Vibrator 1 Unit Chainsaw 2 Units Bar/shear Cutter 1 Unit Dumptruck 1 Unit Electric Grinder 2 Units Jackhammer With Air Compressor 4 Units Welding Machine 1 Unit One Bagger Concrete Mixer 4 Units Cut-off Machine B13-2024-10 Project Title: Construction Of Bleachers With Canopy At Wangan Elementary School, Brgy. Wangan, Calinan District Source Of Fund: Df, Sb No. 1, Cy 2024 (24186) Approved Budget For The Contract: Php 7,500,000.00 Project Duration: 180 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php 10,000.00 Minimum Equipment Requirements: 1 Unit Backhoe Pc-60 W/ Breaker 1 Unit Cargo Stake Truck 1 Unit Plate Compactor 1 Unit Dumptruck 1 Unit Walk-behind Compactor 1 Unit Steel Bar Bender 2 Units One-bagger Concrete Mixer 2 Units Welding Machine 2 Units Bar/shear Cutter 1 Unit Boom W/ Chainblock 2 Units Electric Grinder 1 Unit Oxy-actylene Cuttiing Outfit 2 Units Electric Handrill 2 Units Cut Off Machine 2 Units Tile Cutter B13-2024-11 Project Title: Construction Of Multipurpose Building At Purok 4, Brgy. San Isidro, Bunawan District Source Of Fund: Df, Sb No. 1, 2024 (24206) Approved Budget For The Contract: Php 4,000,000.00 Project Duration: 150 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit Jackhammer With Air Compressor 2 Units Welding Machine 1 Unit Mini Dumptruck 1 Unit Cut Off Machine 1 Unit Backhoe Pc-30 1 Unit Electric Grinder 1 Unit Plate Compactor 2 Units Electric Drill 1 Unit One Bagger Mixer 2 Units Riveter 1 Unit Concrete Vibrator 2 Units Tile Cutter 2 Units Bar/shear Cutter 6 Units H-frame W/cross Bracing And Joint Pin B13-2024-12 Project Title: Construction Of Mini Green Park With Solar Lights And Drainage System Along Bonifacio-mabini-aurora Junctions, Brgy. 33-d, Poblacion District Source Of Fund: Df, Sb No. 1, Cy2023 (23269) Approved Budget For The Contract: Php 3,450,000.00 Project Duration: 120 Calendar Days Pcab License: Gb-4 Playground Or Recreational Work/ Electrical Works/ Flood Control Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 2 Units Bar/shear Cutter 1 Unit One Bagger Concrete Mixer 1 Unit Boom Truck 1 Unit Plate Compactor 1 Unit Concrete Vibrator 1 Unit Tile Cutter 1 Unit Electric Grinder 1 Unit Welding Machine 1 Unit Mini-dumptruck B13-2024-13 Project Title: Installation Of Solar Street Lights At Purok 8 And 9 Duha, San Rafael, Brgy. 10-a, Poblacion District Source Of Fund: Adf Cy 2024 (24057) Approved Budget For The Contract: Php 4,000,000.00 Project Duration: 60 Calendar Days Pcab License: Electrical Works Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit Concrete Mixer 1 Unit Jackhammer With Generator Set 1 Unit Concrete Vibrator 1 Unit Boom Truck B13-2024-14 Project Title: Construction Of Concrete Pathway With Drainage At Subasta Elementary School, Brgy. Subasta, Calinan District Source Of Fund: Df, Sb No. 1, Cy 2024 (24184) Approved Budget For The Contract: Php 3,600,000.00 Project Duration: 120 Calendar Days Pcab License: Road/ Flood Control Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit Cargo Stake Truck/low Bed Truck 1 Unit Concrete Saw 1 Unit Jack Hammer With Air Compressor 1 Unit Concrete Vibrator 1 Unit Dumptruck 5 Cu.m. Cap. 1 Unit Steel Forms 1 Unit Backhoe (pc-60) 1 Unit Bar Cutter 1 Unit Hand Roller B13-2024-15 Project Title: Completion Of Multipurpose Building At Megkawayan Elementary School, Brgy. Megkawayan, Calinan District, Davao City Source Of Fund: Sef Cy 2024 (3321-a) Approved Budget For The Contract: Php 2,000,000.00 Project Duration: 60 Calendar Days Pcab License: Building Small B Cost Of Tender Documents: Php 5,000.00 Minimum Equipment Requirements: 1 Unit One-bagger Concrete Mixer 2 Units Electric Grinder 1 Unit Concrete Vibrator 1 Unit Welding Machine 1 Unit Bar/shear Cutter 1 Unit Cut-off Machine 12 Units H-frame With Cross Bracing & Joint Pin 4 Units Tile Cutter 2 Units Electric Handrill Procurement Activity Schedule A. Issuance Of Bidding Documents November 6 To 27, 2024 8:00 Am To 5:00 Pm Bac Secretariat For Civil Works (excluding Saturdays, Sundays & Holidays) B. Pre-bid Conference November 13, 2024, 10:30 Am Virtual Meeting Through Zoom C. Deadline Of Submission And Receipt Of Bids November 27, 2024, 9:00 Am Bac Conference Room, Ground Floor, City Hall, Davao City D. Opening Of Bids November 27, 2024, 10:30 Am Virtual Meeting Through Zoom (sgd) Atty. Joseph Dominic S. Felizarta, Ce Bac Chairman

Details: Description Invitation To Bid For The Procurement Of 5 Units Multi-tiller Cultivator Under Organic Agriculture Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Organic Agriculture Program Intends To Apply The Sum Of Seven Hundred Fifty Thousand Pesos (ᵽ 750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 5 Units Multi-tiller Cultivator Under Organic Agriculture Program Fy 2025 With Project Identification No.: Itb-2025-10-027 . Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 5 Units Multi-tiller Cultivator Walking-type Agricultural Tractor (rotary Tilling-type) I. Design And Performance Prime Mover: Four-stroke, Air-cooled, Single-cylinder, Gasoline Engine Rated Powe: 4.8 Kw (6.5hp), Minimum Starting System: Rope Recoil Fuel Consumption: Not More Than 1.5 Li/hr Engine Fuel Tank Capacity: 3.5 Liters, Minimum Field Capacity: 0.0625 Ha/hr, Minimum Average Depth Of Tillage: 65 Mm, Minimum Average Width Of Tillage: 1000 Mm Minimum Shall Be Free From Any Manufacturing Defects That May Be Detrimental To Its Operation All Metal Surfaces Shall Be Painted Properly Ii. Attachments And Accessories "a. Hoe Set (at Least 36 Cm Diameter) B. Rear Running Wheel C. L-shaped Tilling/rotary Blades D. Plough (1 Pc) E. Metal Wheel (pair) F. Weeding Wheel (pair) G. Ridger (1 Pc) H. Water Pump And Pto Mount (1 Set)" Iii. Safety Noise Level: 95db (a), Maximum During Operation, If Exceeded, An Ear Protection Device Must Be Provided For Each Unit. For Operator's Safety, The Following Shall Be Provided: Belt-guard Or Cover Mud-guard Rubber Hand Grip Iv. Maintenance Provided With Set Of Manufacturer's Standard Tools V. List Of Applicable Paes/pabes/pns/bafs Paes For Walking Type-agricultural Tractor (rotary Tilling Type) Paes For Small Engine Paes For Guidelines On After-sales Service Paes For Agricultural Machinery - Operator's Manual Vi. Other Requirements With Original Equipment Manufacturers (oem) Operators Manual With One (1) Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary Warranty Card For Each Unit Shall Be Provided By The Winning Bidder/supplier Upon Delivery Certification That The Bidder/supplier Shall Provide Warranty And After-sales Service Conforming To Pns/pabes 192:2024 - After-sales Service — Guidelines With Reflectorized "da-calabarzon" Logo With Valid And Passing Test Report Issued By Amtec Or Other Accredited Testing Center Certification That The Bidder/supplier Shall Provide Fuel And Technician/operator During Demonstration And Training Of The Operator/recipient Certification That The Bidder/supplier Shall Provide Fuel, Engine Oil And Technician/operator During Acceptance Testing. The Bidder/supplier Shall Ensure That The Machine And Its Engine Is Already Subjected To Break-in Prior To Conduct Of Acceptance Testing. Certification That All Units Shall Be Demonstrated And The Recipients Shall Be Trained In Proper Operation, Routine Maintenance, After-sales And Warranty Coverage Conduct Of Acceptance Testing Of Randomly Selected Units Upon Delivery Prior To Acceptance And Payment Of The Contractor. The Number Of Units Will Be Determined Using Pns/paes/pabes - Agricultural Machinery - Method Of Sampling. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers, Accreditation And Classification (namdac) Certificate Of Accreditation With Permit To Operate (pto) And Certificate Of Conformity (cc) Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 All Technical Specifications Shall Be Signed And Sealed By Professional Agricultural And Biosystems Engineer (abe) With Valid Prc License And Professional Tax Receipt (ptr) In Consonance With Ra 10915 Place Of Delivery: Apco Offices Calabarzon Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (ᵽ1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On November 27, 2024 11:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before December 9, 2024 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 9, 2024 11:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: November 19, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Invitation To Bid November 20, 2024 1. The Dpwh- Quirino District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of ₱49,000,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Stated Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh- Quirino District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1 Name Of Project/location : Construction/ Rehabilitation Of Water Supply/ Septage And Sewerage/ Rain Water Collectors - Water Supply System - Construction Of Cabarroguis Water System, Cabarroguis, Quirino Contract I.d. : 25bk0032 Brief Project Description L=7660 Ln.m. And Rcbc Scope Of Works : Construction Of Water Supply Systems Earthworks • Removal Of Actual Structures/obstruction, Pccp • Structure Excavation, Common Soil • Embankment From Roadway/ Structure Excavation, Common Soil • Gravel Fill Reinforced Concrete • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed), Grade 40 • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Sewer Line Works • Septic Vault, Concrete/chb • Plumbing Fixtures • Cold Water Lines • Ceiling, 4.5 Mm, Metal Frame, Fiber Cement Board • Aluminum Glass Windows, Awning Type • Prepainted Metal Sheets, Above 0.427 Mm, Rib Type, Long Span • Unglazed Tiles • Glazed Tiles • Cement Plaster Finish • Painting Works, Masonry/concrete • Painting Works, Steel • Pvc Doors And Frames • Chb Non Load Bearing (including Reinforcing Steel), 100mm • Structural Steel, Trusses • Structural Steel, Purlins Electrical • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Electric Wire, 50 Mm2, Acsr • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pole Mounted Distribution Transformer (oisc) With Complete Accessories, Pole Type • Lighting Fixtures And Lamps Mechanical • Water Pumping System Water Supply • Pipeline Trench Excavation • Fill And Backfill • Polyethylene (pe) Plastic Pipe Approved Budget For The Contract (abc) : ₱49,000,000.00 Contract Duration : 362 Calendar Days Cost Of Bidding Documents : ₱25,000.00 Pcab License Category C&d (size Range : Small B) 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category (see Table Above). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15-2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh- Quirino District Engineering Office And Inspect The Bidding Documents At Procurement Unit Office, Dpwh Quirino District Engineering Office During Weekdays From November 22, 2024 - December 16, 2024. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Stated Above. Pursuant To Section 17.5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh- Quirino District Engineering Office Will Hold A Pre-bid Conference On December 3, 2024 9:00 A.m. Via Zoom Meeting Id: 460 121 7399 Passcode: Pru_24 At Conference Room, Dpwh Quirino District Engineering Office And Through Live-stream On Youtube Channel: Www.youtube.com/@dpwh.quirino.districteo, Which Shall Be Open To Prospective Bidders. 11. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_quirino@dpwh.gov.ph For Electronic Submission On Or Before December 16, 2024 Not Later Than 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 13. Bid Opening Shall Be On December 16, 2024 Immediately After The Deadline Of Submission Of Bids, Via Zoom (same Id And Passcode With The Pre-bid Conference) At Conference Room, Dpwh Quirino District Engineering Office And Through Live-stream On Youtube Channel: Https://www.youtube.com/@dpwhquirinodeoproclivestream. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 14. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 15. If At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No.9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 16. The Dpwh- Quirino District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 17. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Www.youtube.com/@dpwh.quirino.districteo For Online Bid Submission: Electronicbids_quirino@dpwh.gov.ph 18. For Further Information, Please Refer To: Brenda B. Carbonel Head, Procurement Unit Email Address: Carbonel.brenda@dpwh.gov.ph

Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental First District Engineering Office Gingoog City, Misamis Oriental, Region X Invitation To Bid For 25kk0044 – Construction Of Multi-purpose Building (magsaysay Community College), Magsaysay, Misamis Oriental 1. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office, Through The Nga The National Expenditure Program (nep) Intends To Apply The Sum Of ₱ 39,600,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25kk0044 – Construction Of Multi-purpose Building (magsaysay Community College), Magsaysay, Misamis Oriental. 2. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building (magsaysay Community College), Magsaysay, Misamis Oriental Contract Id No. : 25kk0044 Locations : Magsaysay, Misamis Oriental Scope Of Works : Construction Of Multi-purpose Building In Magsaysay Community College, Magsaysay, Misamis Oriental, A Two-unit 2sty6cl Building Where The Scope Consists Of The Following: Complete Structural Component (reinforced Concrete Footing, Columns And Beams), Roof Trusses And Roof Sheets, Including All Roofing Accessories (ridge Roll, Downspout And Flashings), Roof On The Exit Stairs, Complete Ceiling With Reflective Insulation, Complete Concrete Gutters With Cement-based, Liquid And Membrane Waterproofing, Complete Masonry And Finishing Works, Complete Doors, And Windows, Complete Plumbing And Sanitary Works, Complete Septic Tank, Complete Cistern And Water Pumping System, Complete Electrical Works. Due To Budget Constrain, The Second Unit Only Has Exterior Painting (no Interior Painting), Accent Walls And Signage Were Also Not Included In The Scope. Approved Budget For The Contract : ₱ 39,600,000.00 Contract Duration : 280 Calendar Days Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Size Range Medium A, Pcab License Category Of (b) For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. The Contractor Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification. 4. Interested Bidders May Obtain Further Information From Department Of Public Works And Highways – Misamis Oriental First District Engineering Office And Inspect The Bidding Documents At Dpwh - Misamis Oriental First District Engineering Office, Gingoog City During Weekdays From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 07, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of ₱25,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Will Hold A Pre-bid Conference On November 14, 2024, 10:00 A.m. At Bac-conference Room, 3rd Floor, Dpwh-mofdeo, And/or Through Videoconferencing/webcasting Via Live Streaming: (youtube Page) Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq Which Shall Be Open To Prospective Bidders. 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. The Deadline For Issuance/ Downloading Of Bidding Documents (buying Of Bidding Documents) Will Be On November 28, 2024 Until 08:30 A.m. In Accordance With The Department's Citizen's Charter (attached As Annex "a") And Unnumbered Memorandum Dated December 27, 2001 (attached As Annex "b"), Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary C. Letter Of Intent (for Foreign Funded Projects) Bids Must Be Duly Received By The Bac Secretariat At Bac-conference Room, 3rd Floor, Dpwh - Misamis Oriental First District Engineering Office For Manual Submission Or At Electronicbids_misamisoriental1@dpwh.gov.ph For Electronic Submission On Or Before November 28, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 28, 2024, Immediately After The Deadline For The Submission Of Bid, At Bac-conference Room, 3rd Floor, Dpwh-mofdeo And Through Live Streaming: Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq (youtube Page) Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. In Consistent Of The Do 127 S 2018, “if At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid”. 11. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Marcelino O. Cabeguin, Jr., A.e.r. April Jane T. Pecasales Oic- Assistant District Engineer Engineer Ii Bac Chairperson Head, Bac Secretariat Dpwh-misamis Oriental 1st Deo Dpwh-misamis Oriental 1st Deo Brgy. 26, Gingoog City, Misamis Oriental Brgy. 26, Gingoog City, Misamis Oriental Tel/ No.: (088) 861-1185 Tel/ No.: (088) 861-1185 Email Address: Dpwhmofdeo@yahoo.com Email Address: Dpwhmofdeo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents : Www.philgeps.gov.ph : Www.dpwh.gov.ph For Online Bid Submission : Electronicbids_misamisoriental1@dpwh.gov.ph November 07, 2024 Approved By: Marcelino O. Cabeguin, Jr., A.e.r. Oic- Assistant District Engineer Bac Chairpbac Chairperson

Details: Description Item No. Items / Description Qty Unit Service Vehicle 1 Petron Rev X 15w40 Oil 16 Galon 2 Top1 Synthetic 15w40 Oil 16 Liters 3 Oil Filter Hilux 3 Pcs 4 Fuel Filter Hilux 3 Pcs 5 Battery Motolite Enduro N50 Mf 1 Pcs 6 Velocity Assy. Hilux 1 Pc 7 Wheel Bearing Assy.hilux 1 Pc 8 Oil Filter Hilux 1 Pc 9 Oil Seal 80-97-10/18.5 For Hilux 1 Pcs 10 Steering Rack Assembly 1 Pc 11 Oil Filter 4m40 1 Pcs 12 Brake Hose 1 Pcs 13 Cable Tie Big 1 Pack 14 Steel Tube 3/8 2 Rolls 15 Steel Tube 1/4 2 Rolls 16 Rear Hub Assy. Machining 1 Pcs 17 Relay 12 Volts 4 Pins 6 Pcs 18 Signal Light Bulb 12 Volts 10 Pcs 19 Brake Lining With Rivets 8 Pcs 20 Horn 12v Mega 1 Pcs 21 Horn Relay 12volts 1 Pcs 22 Relay Socket 1 Pcs 23 Engine Oil Sae 40 Plantinum 2 Pail 24 Piston Ring 4d33 Canter 1 Set 25 Piston Assy. 4d33 Canter 1 Set 26 Connecting Rod Bearing 4d33 1 Set 27 Overhauling Gasket 4d33 1 Set 28 Fuel Filter 4d33 4 Pcs 29 Brake Pad Front 4 Set 30 Brake Pad Front Nissan Urvan 2 Set 31 Fan Belt B45 17x1170 3 Pcs 32 Horn Relay 24 Volts 6 Pcs 33 Brake Lining With Rivets 8 Pcs 34 Gasket Cement 1 Pcs 35 Gasket All 2 Pcs 36 Brake Pad Front Hilux Patrol 1 Set 37 Brake Master Repair Kit 1 Set 38 Fuel Filter F196 2 Pcs 39 Air Cleaner Hilux 1 Pcs 40 Brake Pad Nissan Ambulance 2 Pc 41 Hydraulic Hose Fabrication 1 Pc 42 (atf) Automatic Transmission Fluid 3 Liters 43 Bn 043472-lhilp-fuel Pump Assy. 6 Pc 44 Up Filter (baldwm) Bt 237 2 Pc 45 Bn 037288-itodld-a/f 10dc1 1 Pc 46 Up Clucth Cover (valeo) Mmc-03(mahindra)bn 008161-dtxhp-clucth Disc 45r15r 1 Set 47 Bn 021011-onp-rubber Cap 4518 1" 10 Pcs 48 Bn 020908-olp-rubber Cap 4533 15/16 10 Pcs 49 Bn 021042-onp-rubber Cap 7059 10 Pcs 50 Lp Oil Filter Us. 1921b Hk 4 Liters 51 Bn 001633-yhyep H/g 4m40 Ysw 1 52 Lp Head Gasket 4m40 Meiji Me200753 1 Pc 53 Bn 002210-ohyep Koyo Brg. 30305d 2 Pc 54 Lp Koyo Brg#33015jr 2 Pc 55 Battery Charger Heavy Duty 1 Pc 56 Battery 11 Plates 2 Pc 57 Battery 9 Plates 2 Pc 58 4m40 Mitsubishi Cylinder Head 2 Pc 59 4m40mitsubishi Starter Assy. 2 Pc 60 Tire 215x70x15c Es88 8 Pcs 61 Oil Filter Vic C-503 2 Liter 62 Brake Fluid Total 1 Liter 63 Oil 40 Platinum 3 Liter 64 Crossbearing For Military Jeep 3 65 Center Bolt 4 66 Hose Clip 10-16 8 Pc 67 Oil Filter C111 2 Pcs 68 Drive Belt 7pk 1515 1 Pc 69 Timing Belt 97t Bando 1 Pc 70 Crossbearing For Military Jeep 3 Pcs 71 Oil Filter 3 Pc 72 Gasket All 2 Pcs 73 Tire 275/65r18 20 Pc 74 Tire 265/60r18 4 Pcs 75 Rotor Disk 2 Set 76 Brake Cleaner 1 Pc 77 Brake Pad 1 Set 78 Alternator Pulley 1 Pc 79 Brake Shoe Rear 1 Set 80 Oil Filter 2 Pc 81 Fuel Filter 2 Pc 82 Diffirential Oil Seal 2 Pcs 83 Rubber Cup 1h 20 Pcs 84 Brake Shoe Bonding 2 Pcs 85 Brake Pad Bonding 2 Pcs 86 Brake Pad Front 2 Pcs 87 Fan Belt 9.5x965 For Military Jeep 8 Pcs 88 Brake Shoe Rear Hilux 4x4 2 Set 89 Brake Pad Front Hilux Patrol 2 Set 90 Brake Fluid National 12 Liters 91 Brake Pad Hi Ace W046 1 Set 92 Engine Oil Sae 40 1 Drum 93 Gear Oil Sae 140 1 Drum 94 Brake Pad Nissan 2 Pcs 95 Center Link Nissan Frontier 1 Pc 96 Tie Rod End 4 Pcs Heavy Equipment 97 Windshield Glass Installation, Bulldozer/gridder/back Hoe 3 Pcs 99 O Ring For Power Steering 4 Pc 101 Oil Seal 130.5x98x12/15 For Sinotruck 4 Pc 103 Fuse 15a Small 20 Pc 105 Fuse 20a Small 20 Pc 107 Oil Seal Sinotruck Small 6 Pc 109 Front Shock 4d33 2 Pc 111 Front Bearing 4d33 2 Pc 113 Radiator Hose Cj 202 3 Pc 115 Hose Clip 3 1/2 4 Pc 117 Hose Clip 2 3/8 15 Pc 119 Air Cleaner Hose 1 Pc 121 Oil Cooler Hose Aj 26 3 123 Air Gauge 1 Pc 125 Secondary Clutch Operating Assy. 1 Pc 127 Hydrovac Assy. Fighter Nc 828264 2 Pc 129 Clucth Hose 1/2 1 Pc 131 Tire 215/70r15 Evergreen 12 Pcs 133 Tire 8.25x16 Sinotruck 8 Pcs 135 Tire 10.00x20 Lug Tire For Backhoe 6 Pcs 137 Leaf Spring Bushing 8 Pcs 139 Hydraulic Hose Fabrication With Fitting 11 Pcs Service Vehicle 137 Brake Shoe (rear) Toyota Hilux 2 Set 138 Brake Pad (front) Hilux (bendix) 2 Set 139 Stud Bolt 1 Set 140 Grease 3 Pails 141 Oil 40 11 Pails 142 Oil 40 7 Pails 143 Deomax 8 Liters 144 Oil Filter (hilux) 1 Pc 145 Fuel Filter (hilux) 1 Pc Heavy Equipment 146 Fuel Filter (bulldozer) 4 Pcs 147 Fuel Filter (backhoe) 2 Pcs 148 Oil Filter (backhoe) 2 Pcs 149 Bucket Teeth (backhoe) 1 Set 150 Oil Filter (backhoe) 2 Pcs 151 Grease 3 Pails 152 Fuel Filter 4 Pcs 153 Stud Bolt (bulldozer) 48 Pcs 154 Welding Rod 2 Boxes 155 Square Bar 18mm 1 Length 156 Gasket All 2 Pcs 157 Gear Oil (volga) 6 Liters 158 Electrical Tape 3 Pcs 159 Automotive Wire #16 (bulldozer) 1 Roll 160 Mighty Gasket 1 Pc

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Bids And Awards Committee Ooooooo ----------------------------------------------------------------------------------------------------------------------------- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Invitation To Bid Ib No. 2024-12-03 (92) Supply And Delivery Of Various Equipment Of Diagnostic And Examination Video Camera - Rebid Abc: ₱ 3,100,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The General Appropriation Act (gaa), Hfep -saa No. 2024-02-0271 Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Three Million One Hundred Thousand Pesos Only ( Php 3,100,000.00 ) Under The Contract For The Supply And Delivery Of Various Equipment Of Diagnostic And Examination Video Camera - Rebid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding, To Wit: Item No. Description Qty Unit Of Measure Unit Cost Total Cost Supply And Delivery Of Various Equipment Of Diagnostic And Examination Video Camera 1 Rigid Proctoscope 1 Set ₱500,000.00 ₱500,000.00 2 Opthalmoscope And Otoscope Set 2 Set ₱200,000.00 ₱400,000.00 3 Laryngoscope With Curved And Straight Blades, Spare Led Bulb And Rechargeable Battery, Neonate And Pediatric Size 2 Set ₱50,000.00 ₱100,000.00 4 Laryngoscope With Curved And Straight Blades, Spare Led Bulb And Rechargeable Battery, Adult Size 2 Set ₱50,000.00 ₱100,000.00 5 Flexible Video Choledoscope With Fiber Optic Lens 1 Set ₱2,000,000.00 ₱2,000,000.00 Total ₱3,100,000.00 This Is A Partial Bid Or Line Item Bid 1. Rigid Proctoscope Description A Proctoscope Is A Hollow Tube, Usually With A Tiny Light At The End, That Can Also Be Used To Take Tissue Samples For Biopsies As A Cancer Screening Tool. The Procedure Also Helps Your Gastroenterologist Find Other Causes Of Rectal And Anal Bleeding, Such As Hemorrhoids. Purpose Of Use Clinical Or Other Purpose Opd-minor Surgery / Ambulatory Surgery Unit Technical Parameter Special Features: - With Holder For Fiber Optic Light Carrier. Optional - Choice Between Ratchet And Fixation Screw. - 3 Blades • Distending Speculum Set, With 3 Blades, Outer Diameter 18mm, Working Length 6cm, With Ratchet And Holder For Fiber Light Carrier With Obturator. • Distending Speculum, As Insertion Aid For Circular Stapler, With 3 Blades, Outer Diameter 27mm, Working Length 6 Cm, With Ratchet, With Obturator The Blade Spread 40mm. Anal Retractor: • Anal Retractor And Distending Speculum , With Holder For Fiber Optic Light Carrier • Blade Pair, Parks Retractor Type, Only Tapered Blades, Working Length 7.5 Cm - 9.5cm. • Blade Pair, Only Tapered Blades, Slim Size Working Length 9.5cm • Blade Pair, Only Fenestrated, Working Length 10 Cm • Fiber Optic Light Carrier, With Fiber Optic Light Cable Connector. Proctoscope For Pediatric And Adult: • Outer Diameter: Working Length: 9.5mm 6.5cm 11mm 11cm 13mm 11cm • Insertion Tube: With Lateral Opening And Mirror, For Use With Proctoscope Tubes. Proctoscope Set, Tube With Obturator: With Fiber Optic Light Cable Connector. Outer Diameter: Working Length: 20mm 8cm 20mm 6.5cm 24mm 8cm 24mm 6.5cm 30mm 6.5cm 30mm 8cm 17mm 6.5cm 17mm 8cm • Proctovision Set: Outer Diameter: 1.9mm Working Length: 6.5cm Direction Of View: 30° Forward Oblique Telescope • Instruments For Proctoscopy: - Sponge Forceps: Length 20 Cm - Swab Forceps: Length 20 Cm - Fistula Hook: Length 18 Cm - Fistula Hook: Distal Bore 0.5 Mm - Snare Guide: Length 20 Cm With Connector Pin For Unipolar Coagulation. • Instruments For The Hemorrhoids: - Hemorrhoid Grasping Forceps: Length 16cm - Ligature Instrument: Feed Opening Diameter 11 Mm, Length 17cm - Cone: Loading Ring Special Feature: - Integrated Mechanical Vacuum Pump - Replaceable Handle - Mobile Use Possible - Optional Combination Possibility With Conventional Handles For Connecting External Pump. • Suction Ligation Instruments: - Suction Opening Diameter 10mm, Length 14cm With Integrated Vacuum Pump. • Suction Ligature Instrument: - Suction Opening Diameter 8mm, Length 19cm With Integrated Vacuum Pump. Environmental Factors Application Environment • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90%. Characteristics A Proctoscope Is A Straight, Hollow Metal Or Plastic Tube, Sometimes With A Tiny Light At The End. Accessories, Consumables, Spare Parts, Other Components Mobility, Portability - Rubber Ligature Ring, Latex-free: 300 Pcs - Mobile Unit With At Least 4 Castor Anti-static Wheels And At Least Two Brakes W/ Holder Of Proctoscope Camera - Mobile Unit With At Least 4 Castor Anti-static Wheels And At Least Two Brakes. Training, Installation And Utilization Pre-installation Requirements - Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost, Warranty Certification And Inspection To Be Provided. Training Of User/s Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty Warranty 5-years Warranty Documentation Documentation Requirements • User, Technical And Maintenance Manuals To Be Supplied In English Language. (hard And Soft Copy), Service Manual In English Language • Provide Certificate Of Calibration Upon Delivery/installation. • List To Be Provided Of Equipment And Procedures Required For Local Calibration And Routine Maintenance • List To Be Provided Of Important Spares And Accessories, With Their Brand Names, Part Numbers, Serial Numbers And Cost. Certificate Of Quality Inspection To Be Provided By Supplier. • Material Safety And Data Sheet Safety And Standards International Standards Certified In At Least One Of The Following: Iso 13485:2003 Medical Devices -- Quality Management Systems -- Requirements For Regulatory Purposes (australia, Canada And Eu) Iso 14971:2007 Medical Devices -- Application Of Risk Management To Medical Devices Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Iec 60601-1-1:2000 Medical Electrical Equipment - Part 1-1: General Requirements For Safety - Collateral Standard: Safety Requirements For Medical Electrical Systems Iec 60601-1-2:2007 Medical Electrical Equipment - Part 1-2: General Requirements For Basic Safety And Essential Performance - Collateral Standard: Electromagnetic Compatibility - Requirements And Tests Iec 60601-2-50:2009 Medical Electrical Equipment - Part 2-50: Particular Requirements For The Basic Safety And Essential Performance Of Infant Phototherapy Equipment Regulatory Approval / Certification Must Be Fda, Ce Or Ul Approved Product. Other Terms And Condition Of Acceptability Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. Delivery Period 45 Calendar Days Upon Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Post Qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital And/or Site Visit To Nearest Hospital Within Caraga Region, Cebu City, Cdo, Or Davao City. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) 2. Ophthalmoscope & Otoscope Description Patient Category Ophthalmoscope Designed To Visualize The Interior Of The Eye, With The Instrument Relatively Close To The Subject's Eye And The Observer Viewing An Upright Magnified Image. Otoscope Exam Helps To Assess The Condition Of The External Auditory Canal (eac), Tympanic Membrane (tm), And The Middle Ear. Mastering The Otoscope Exam Leads To Accurate Diagnoses, Allowing For Targeted Treatment And Prevention Of Complications. Purpose Of Use Clinical Department/ward Ambulatory Surgery Unit Technical Specifications Otoscope Features: • 2.5v Halogen Light Source For True Tissue Color And Long Lasting Lamp Performance. • Fiberoptics For Cool, Obstruction Free Light Transmission. • Wide Angle, Removable 2.5x Viewing Lens Permits Instrumentation. • Sealed System With Included Insufflator Fitting For Pneumatic Otoscopy. • Otoscope Head Made From Polymid - An Impact Resistant Space Age Thermoplastic. • Disposable Polypropylene Ear Specula In 2.5mm And 4.0mm Sizes Are Convenient, Safe, And Economical. • “aa” Metal Battery Handle Interchanges Ophthalmoscope. • With Integral On/off Slide Switch For Ambidextrous Use. • Complete Instrument Includes Insufflator Fitting And Tube Of 5 Each 2.5mm And 4.0mm Specula. Ophthalmoscope Features: • 2.5v Halogen Light Source For True Tissue Color And Long Lasting Lamp Performance. • 5 Aperture Selections (small Aperture, Large Aperture, Fixation Aperture, Semicircle Aperture, And Red-free Filter) • 17 Lenses From -20 To +20 Diopters For Better Resolution. • Illuminated Dial. • Silicon Coated Protection Of Glass Components. • Built-in Lens Dust Cover. • Rubber Brow Rest Prevents Scratching Of Eyeglasses. • Ophthalmoscope Head Made From Polymid - An Impact Resistant, Space-age Thermoplastic. • “aa” Metal Battery Handle Interchanges Otoscope. • With Integral On/off Slide Switch For Ambidextrous Use. Technical: • Otoscope Viewing Lens: Swivel • Otoscope Weight: 5 Oz. • Otoscope Length: 6.5 Inches • Opthalmoscope Weight: 4 Oz • Opthalmoscope Length: 6.75 Inches • Opthalmoscope Viewing Lenses: 19 Lenses Technical Services As Follows: • System Warranty Must Be Two (2) Years • Calibration Of The Unit Must Be Performed After Installation With Certificate • Service Kits And Consumables To Be Included For One Year Use. • Supplier Must Deliver And Install The Unit Without Cost To The Owner • Training Of End-users And Biomed. Physical/chemical Characteristics Dust-free Sealed Optics. Supplied In Protective, Reclosable Container. On/off Switch To Be Robust And Easy To Use. External Material To Be Non-ferrous. Accessories, Consumables, Spare Parts, Other Components • Rechargeable Battery 1.5 Volts Aa • 2 Pcs Extra Bulb Per Unit Training, Installation And Utilization Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning Local Clinical Staff To Affirm Completion Of Installation Training Of User/s Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty 5 Years Environmental Factors • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Safety And Standards International Standards Certified In At Least One Of The Following: En 12470-5: European Standard For Clinical Thermometer Performance - Infrared Ear Thermometers Astm E1965-1998: Astm (american Society Of Testing And Methodology) - Standard Specification Of Infrared Thermometers For Intermittent Determination Of Patient Temperature En 980: Graphical Symbols For Use In The Labeling Of Medical Devices En 1041: Information Supplied By The Manufacturer With Medical Devices En 60601-1: Medical Electrical Equipment Part 1: General Requirements For Safety (iec: 60601-1:1998) En 60601-1-2: Medical Electrical Equipment Part 1-2: General Requirements For Safety - Collateral Standard: Electromagnetic Compatibility - Requirements And Test (iec 60601-1-2:2001) Other Terms And Condition Of Acceptability Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. Delivery Period 45 Calendar Days Upon Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Post Qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital And/or Site Visit To Nearest Hospital Within Caraga Region, Cebu City, Cdo, Or Davao City. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) 3. Laryngoscope With Curved And Straight Blades, Spare Led Bulb And Rechargeable Battery, Neonate And Pediatric Size Description Patient Category The Curve Blade Laryngoscope Is Traditionally Recommended For Intubation In Infants, Due To The Large Size And Flexibility Of The Infant Epiglottis. The Miller Straight Laryngoscope Blade Is Regarded As The Preferred Blade To Expose The Laryngeal Inlet In Infants And Children. Purpose Of Use Clinical Department/ward Ambulatory Surgery Unit Technical Specifications Laryngoscope With 1 Piece Of Handle With Special Lock And Waterproof System. Lightweight Design For Improved Balance And Maneuverability. Laryngoscope Set Is Composed Of 10 Pieces Of Blade: [macintosh (00, 0, 1, 2, 3)], [miller (00, 0, 1, 2, 3)] With Sizes Embedded Clearly And Accordingly: Size 00, Macintosh-00 , And Miller-00 Size 0, Macintosh-0 , And Miller-0 Size 1, Macintosh-1 , And Miller-1 Size 2, Macintosh-2 , And Miller-2 Size 3, Macintosh-3 , And Miller-3 Technical Services As Follows: • System Warranty Must Be 5 Years • Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Physical/chemical Characteristics • Materials: Stainless Steel/fiber Optic • Usage: Right Hand / Left Hand Accessories, Consumables, Spare Parts, Other Components • 4 Pcs Led Bulb (white Light) • 2 Medium Rechargeable Battery 1.5volts Heavy Duty, Fast Charging Batteries • Charger With Type-c Cord • Safety Carrying Case Or Waterproof Durable Box Training, Installation And Utilisation Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning Local Clinical Staff To Affirm Completion Of Installation Training Of User/s Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty 5 Years Environmental Factors 1. Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. 2. Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. (hard Copy And Soft Copy) Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Serial Numbers, Part Numbers And Cost. Certificate Of Warranty, Calibration And Inspection To Be Provided By Supplier. Safety And Standards International Standards Risk Classification - Class B (ghtf Rule 11);class Ii (usa); Class Ii (eu, Japan, Canada And Australia)international Standards - Iso 13485, Fda, Ce. Other Terms And Condition Of Acceptability Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. Delivery Period 45 Calendar Days Upon Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Post Qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital And/or Site Visit To Nearest Hospital Within Caraga Region, Cebu City, Cdo, Or Davao City. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) 4. Laryngoscope With Curved And Straight Blades, Spare Led Bulb And Rechargeable Battery / Adult Description Patient Category The Most Common Laryngoscope Blade Used For Intubation In Adults Is The Curved Blade And The Straight Blade Occasionally. This Is Inserted Into The Right Side Of The Mouth To Displace The Tongue Laterally. The Tip Of The Blade Sits In The Vallecula And Is Lifted Forward To Elevate The Epiglottis And Expose The Laryngeal Inlet. Purpose Of Use Clinical Department/ward Ambulatory Surgery Unit Technical Specifications Laryngoscope With 1 Piece Of Handle With Special Lock And Waterproof System. Lightweight Design For Improved Balance And Maneuverability. Laryngoscope Set Is Composed Of 8 Pieces Of Blade: [macintosh (1, 2, 3, 4)], [miller (1, 2, 3, 4)] With Sizes Embedded Clearly And Accordingly Size 1, Macintosh-1 , And Miller-1 Size 2, Macintosh-2 , And Miller-2 Size 3, Macintosh-3 , And Miller-3 Size 4, Macintosh-4 , And Miller-4 Technical Services As Follows: • System Warranty Must Be Five (5) Years • Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 1 Day Period. Physical/chemical Characteristics • Materials: Stainless Steel/fiber Optic • Usage: Right Hand / Left Hand Accessories, Consumables, Spare Parts, Other Components • 4 Pcs Led Bulb (white Light) • 2 Medium Rechargeable Battery 1.5volts Heavy Duty, Fast Charging Batteries • Charger With Type-c Cord • Safety Carrying Case Or Waterproof Durable Box Training, Installation And Utilisation Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning Local Clinical Staff To Affirm Completion Of Installation Training Of User/s Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty 5 Years Environmental Factors 1. Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. 2. Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. (hard Copy And Soft Copy) Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Serial Numbers, Part Numbers And Cost. Certificate Of Warranty, Calibration And Inspection To Be Provided By Supplier. Safety And Standards International Standards Risk Classification - Class B (ghtf Rule 11);class Ii (usa); Class Ii (eu, Japan, Canada And Australia) International Standards - Iso 13485, Fda, Ce. Other Terms And Condition Of Acceptability Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. Delivery Period 45 Calendar Days Upon Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Post Qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital And/or Site Visit To Nearest Hospital Within Caraga Region, Cebu City, Cdo, Or Davao City. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) 5. Flexible Video Choledoscope With Fiber Optic Lens Description Patient Category An Assembly Of Devices Used For Direct Visualization Of The Biliary Tract Which Can Be Used Both Diagnostic And Therapeutic Purposes. Pathologies Of The Intra- And Extra-hepatic Biliary Tree Can Be Directly Visualized Which Can Be Used Intraoperatively. In The Opd-setting, Patients With Retained Biliary Duct Stones With T-tube, The Scope Can Be Used Through The Tract To Extract The Stones. Purpose Of Use Clinical Department/ward Ambulatory Surgery Unit Technical Specifications Detailed Requirements: Monitor ● 32 Inches 4k Monitor With Pixel Upscaling Feature ● Multimodality Display Capability Producing Sharp, Vivid Images By Enhancing Structure And Color ● Panel: A-si Tft Active Matrix Lcd (opti-contrast Panel) ● Voltage: 100-240v ● Resolution: At Least 3840 X 2160 Pixels ● Aspect Ratio: 16:9 ● Inputs: Hdmi, Dvi-d, Bnc Ports Video Processor ● High Definition Processor With 4led Light Source ● Touch Panel ● Capable Of Nbi Observation With Improved Brightness In Dark Area ● Capable Of Infrared Observation ● 3d Display Capable With Use Of 3d Scopes And 3d4k Monitors ● Input: Dvi, Hd-sdi, Y/c Videocholedochoscope ● Field Of View: 120 Degrees ● Depth Of Field: 3-100mm ● Direction: 0 Degree ● Up And Down Deflection 120-210 Degrees ● Outer Diameter: <6mm ● Inner Channel Diameter: 2mm ● Working Length: At Least 350mm ● Connectible To Video Processor And Light Source Machine ● Fiber Optic Lens Physical/chemical Characteristics Components: ● Video Choledoscope With Attachment To Video Processor And Light Source ● The Unit Is To Be Supplied On A Stable, Mobile Cart To Place Video Processor And Monitor And With Handle For Properly Hanging Of The Scope Mobility And Portability: ● The Cart Is Mobile Accessories, Consumables, Other Components ● Oval Snare (5 Pcs) ○ Diameter And Work Length: 1.8 X 1000mm ○ Opening Width 10/15/20 Mm ○ Working Channel > 2.0mm ● Endoscopy Basket Retrieval Device (5 Pcs) Training, Installation And Utilization Pre-installation Requirements Supplier To Provide Product Demonstration And Perform Safety And Operation Checks Prior To Hand-over. Requirements For Commissioning Clinical Staff To Affirm Completion Of Parts And Installation Training Of User/s Product Orientation For Operation And Maintenance For End Users As Well As Biomedical Engineers. Troubleshooting Training For At Least Two (2) Biomedical Engineers. User Care Demonstrate The Proper Cleaning And Disinfection Warranty And Maintenance Warranty ● 5 Years On Parts And Services. Free Quarterly Preventive Maintenance During The Warranty Period. ● Warranty Period Shall Commence From The Date Of Acceptance By The End User. ● Quotation Of Annual Preventive Maintenance Cost After The Warranty Period Expires Environmental Factors Storage Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50°celsius And Relative Humidity Of 15 To 90%. Capable Of Operating Continuously In Ambient Temperature Of 10 To 40°celsius And Relative Humidity Of 15 To 90%. Documentation ● Original Hard Copy And Soft Copy Of User, Technical And Maintenance Manuals To Be Supplied In English Language. ● Certificate Of Warranty To Be Provided. ● Certification By The Supplier That At Least One Service Engineer Is Available To Provided Quick On-site Support ● Iso Compliance Certificate Of The Manufacturer Safety And Standards International Standards Certified In At Least One Of The Following: Iso 13485:2003 Medical Devices -- Quality Management Systems -- Requirements For Regulatory Purposes (australia, Canada And Eu) Iso 14971:2007 Medical Devices -- Application Of Risk Management To Medical Devices Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Iec 60601-1-1:2000 Medical Electrical Equipment - Part 1-1: General Requirements For Safety - Collateral Standard: Safety Requirements For Medical Electrical Systems Iec 60601-1-2:2007 Medical Electrical Equipment - Part 1-2: General Requirements For Basic Safety And Essential Performance - Collateral Standard: Electromagnetic Compatibility - Requirements And Tests Iec 60601-2-37:2007 Medical Electrical Equipment - Part 2-37: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Medical Diagnostic And Monitoring Equipment Iec 61391-1:2006 Ultrasonics - Pulse-echo Scanners - Part 1: Techniques For Calibrating Spatial Measurement Systems And Measurement Of System Point-spread Function Response Iec 61391-2:2010 Ultrasonics - Pulse-echo Scanners - Part 2: Measurement Of Maximum Depth Of Penetration And Local Dynamic Range Iec 62359 :2010 Ultrasonics - Field Characterization - Test Methods For The Determination Of Thermal And Mechanical Indices Related To Medical Diagnostic Ultrasonic Fields Other Terms And Condition Of Acceptability Supplier Must Comply With The Following Conditions: 1. Must Be The Authorized Distributor Of The Principal Company Of The Equipment And The Necessary Consumables In The Philippines 2. Submit Certificate Of Training Of The Company Engineer /technical Personnel And Product Specialist Issued By The Principal Or Manufacturer 3. Provide Company Response Within 24-48hrs In Case Technical Problems Or Equipment Breakdown 4. Must Submit Notarized Certificate Of Availability Of Spare Parts For The Next 5years 5. Supplier Must Have An Actual Installation Of The Offered Brand And Model 6. Provision On-site Training For End-user & Maintenance Personnel On Basic Preventive Maintenance And Proper Operation Of The Unit. Delivery Period 45 Calendar Days Upon Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. Post Qualification Must Be Willing To Send Demo Unit To Caraga Regional Hospital And/or Site Visit To Nearest Hospital Within Caraga Region, Cebu City, Cdo, Or Davao City. Supplier To Provide Actual Prototype/demo-unit During The Conduct Of Post Qualification- Same Brand & Model Of Offered Bid, No Alteration Of Actual Submitted Brochure Technical Specification Sheets. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Technical Specification And Other Terms Of Reference Are Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. Slcc Must Be Within 5 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature. Similar In Nature Means, The Bidder Shall Have An Slcc Of Any Medical Equipment. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, At Procurement Section, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 06, 2024 – December 03, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference November 19, 2024 At 9:00 O’clock In The Morning Via Zoom Platform Join Zoom Meeting: Https://us06web.zoom.us/j/85349027824?pwd=fjavaoznvzha69hbf9iowdayb7zqf9.1 Meeting Id: 853 4902 7824 Passcode: 506174 Deadline Of Submission Of Bids December 03, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com . Opening Of Bids December 03, 2024 At 2:00 P.m. Via Zoom Platform. Link For The Opening Of Bids Shall Be Provided To The Qualified Bidders Only Or Those Who Purchase The Bidding Documents. Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1zi4lh_k9g5xfntde4vh7cwjmbw4w4hwn?usp=sharing Payment Of Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before December 03, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 03, 2024 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted And Shall Disqualifed 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com. 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 (086) 826-9058 Mobile Nos: Globe: 0953-9212-832 / Smart: 0985-0508-783 E-mail Address: Crhprocurement.bac@gmail.com Fb Page: Caraga Regional Hospital – Bids And Awards Committee Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Details: Description Republic Of The Philippines University Of Northern Philippines Tamag, Vigan City Invitation To Bid For The Procurement Of Patient Communication Simulator And Other Digital Tools And Equipment 1. The University Of Northern Philippines, Through The Fiduciary Fund, 2024 Intends To Apply The Sum Of ₱ 7,896,631.00 The Abc To Payments Under The Contract For Procurement Of Patient Communication Simulator And Other Digital Tools And Equipment/g-2024-43. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The University Of Northern Philippines Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 15 Calendar Days For Lot 1 And 60 Calendar Days For Lot 2 Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From University Of Northern Philippines And Inspect The Bidding Documents At The Address Given Below During 8:00 Am – 12:00 Pm And 1:00-5:00 Pm, From Monday To Friday Except Non-working Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21 – December 11, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee To The Cashier’s Office For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, To Wit: Lot No. Abc Price Of Bid Documents Per Lot 1 ₱ 7,500,000.00 ₱ 10,000.00 2 396,631.00 500.00 1-2 7,896,631.00 10,000,000.00 If The Bidder Shall Submit Its Bid For More Than One Lot, The Bidder Shall Pay The Corresponding Maximum Fee For The Bidding Documents Stated In The Guidelines Issued By The Gppb Based On The Total Abc Of The Lots To Be Bid. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The University Of Northern Philippines Will Hold A Pre-bid Conference On November 29, 2024, 9:00 Am At Bac Meeting Room, 2/f Roco Lina Building, University Of Northern Philippines, Tamag, Vigan City, Ilocos Sur And/or Through Video Conferencing Or Webcasting Via Google Meet (https://meet.google.com/jxm-txqj-xov) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through: (i) Manual Submission At The Office Address Indicated Below On Or Before December 11, 2024, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 11, 2024, 9:00 Am At The Given Address Below And/or Via Google Meet (https://meet.google.com/jxm-txqj-xov). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The University Of Northern Philippines Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dr. Fatima F. Rocamora/dr. Frances R. Duldulao University Of Northern Philippines Tamag, Vigan City, Ilocos Sur 2700 Bac@unp.edu.ph (077) 632-6895 Www.unp.edu.ph You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph November 20, 2024 Fatima F. Rocamora, Edd Bac Chairperson Procurement Of Patient Communication Simulator And Other Digital Tools And Equipment Abc: ₱ 7,896,631.00 Lot No. Item No. Unit Item Description Qty Abc --for The Provision Of Digital Tools For Teaching And Learning For The College Of Medicine (pr #2024-10-03-799) Fiduciary Fund Lot 1--1. Unit Patient Communication Simulator (pcs) --abc: ₱ 7,500,000.00 Full-bodied Patient Simulator With Artificial Intelligence Based Advanced Communication Skills And Minimum Speech Recognition Features As Follow: A. Natural Voice/speech Recognition And Spontaneous Response As Opposed To A Repeated Prerecorded Template, B. Text-to-speech (tts) Synthesis Application Within The Simulator-software Interface, C. Simulator Intercom-like "pus-to-talk" Through Voip Within The Simulator Software Interface, D. Male And Female Voice Synthesis With Multi-lingual Capability, E. Speech Recognition With Unlimited Questions, F. Artificial Intelligence (ai) Voice Responses. Connectivity Features: -wire And Wireless Networks/connections -controlled From Modern Browser Using Html5 User Interface -remote Login, Operation And Review -all Features Controllable And Available From Any Location, Bandwidth Permitting -cloud-connected And Accessible From All Devices -encrypted Communications From Simulator-cloud And Cloud-client Using Online Banking Level Security Protocols -operating Device Independent -no Requisite For Instructor Workstation; Utilizes Existing Hardware Equipment -no Client Software Installed. Requires No Plugins Or Apps To Be Installed Video Recording Features: -with Inconspicuously Built-in High-definition Camera For Unlimited Recording Of Patient Point Of View Experience -streams High Definition, Low Latency Video For Remote Viewing And Reviewing Capability -support On-screen/tab Monitor Annotations For Debriefing Purposes Without Added Learning Management System Software Features: -saves/archives Simulation Session With Physiologic Data Trend Chart, Video, Audio, Log And Checklist Data For Review -provides A Single Searchable Log For Every Simulation Including Physiologic Parameters, Voice Transcripts And Instructor Entries -with Onscreen Getting Started Guide And Real-time Customer Support Chat Embedded Within The Simulator Software Interface -5 Year Simulation Log Archive. Features/accessories/inclusion: -wireless Auscultation Scope Delivering Realistic Lung, Heart, And Bowels Sound Through Any Stethoscope Or Attached Headset By Using Near Field Communication (nfc) And Bluetooth Technology -blood Pressure Measurement Playback Of Korotkoff Sounds And Brachial Pulse Using Bluetooth Technology -built-in Microphone And Speakers -patient Monitoring With Vitals And Waveforms -intubation - Oral, Nasal And Digital -scenarios Included With Customizable Patients -scenarios-driven, Instructor-controlled Case-customized Simulation Also Includes: -two-crank Hospital Bed Included For The Mannequin And On Site Training Maximum Of 15 Participants For 2days Warranty - 3years For Parts And Service -1- Lot 2--2. Unit Child Airway Management Trainer With Stand-- ₱ 396,631.00 -a Simulated Head Of A 5-year-old Child Featuring Realistic Size And Anatomy. Perfect For Practicing Airway Management Skills On Pediatric Patients. -realistic Anatomy Includes Mouth, Tongue, Oral Pharynx, Larynx, Epiglottis, Vocal Cords, Trachea And Esophagus. Separate Lungs For Auscultation. Inflatable Stomach Bladder Indicates Esophageal Insufflation. -practice Suctioning And Oral, Nasal And Intubation Techniques. Includes Training Stand To Mount Head, Pump Spray Lubricant And Hard Carrying Case. Manual Carotid Pulse. Warranty – 2 Years For Parts And Services -1- 3. Unit Infant Airway Management Trainer -features Landmarks Including Uvula, Vocal Cords, Glottis, Epiglottis, Larynx, Arytenoid Cartilage, Trachea, Esophagus And Inflatable Lungs And Stomach. Perform Nasal And Oral Intubation Vocal Cords Are Highlighted In White For Easy Laryngoscopic Viewing. -carry Bag And Lubricant Included Latex Free Warranty – 2 Years For Parts And Services -1- 4. Unit Breast Self-examination Simulator And Cd -state Of The Art Material To Create A Realistic Look, Feel And Texture -excellent Platform To Teach How To Perform Breast Examination As Well As Demonstrate Self-examination Techniques -left Breast Contains 4 Masses In The Breast Tissue And 2 Masses In Axilla Region -masses And Depths Ranges In Different Sizes -right Breast Contains 2 Masses Designed To Simulate An Enlarged Axillary Lymph Mode And 2 Fluid Filled Cysts (19mm And 24mm) -includes User Guide, A Breast Examination Learning Package Cd And Carry Case Warranty – 2 Years For Parts And Services -1-

Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental First District Engineering Office Gingoog City, Misamis Oriental, Region X Invitation To Bid For 25kk0038 – Construction Of Multi-purpose Building Including Facilities, Barangay Poblacion, Binuangan, Misamis Oriental (phase 2) 1. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office, Through The Nga The National Expenditure Program (nep) Intends To Apply The Sum Of ₱ 29,700,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25kk0038 – Construction Of Multi-purpose Building Including Facilities, Barangay Poblacion, Binuangan, Misamis Oriental (phase 2). 2. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building Including Facilities, Barangay Poblacion, Binuangan, Misamis Oriental (phase 2) Contract Id No. : 25kk0038 Locations : Binuangan, Misamis Oriental Scope Of Works : Construction Of Multi-purpose Building Including Facilities In Barangay Poblacion, Binuangan, Misamis Oriental (phase 2), A 42.4 X 24.4 Public Market Where The Scope Consists Of The Following: Removal And Relocating Of Two Electrical Posts, Completion Of The Existing Columns And Additional Columns For The Façade And Rear Part Of The Building, Complete Roof Beams And Roof Trusses, Complete Roofing Works (this Includes Installation Of 25mm Thk Polyurethane Roof Panel And Other Roofing Accessories Such As Gutter, Flashings And Downspout), Fiber Cement Ceiling For The Office Area, Bathroom Area And A Rentable Space, Tiling Work (this Entails Complete Non-skid Floor Tile For The Whole Building, Wall Tiles For The Bathroom Area And Granite Countertop), Complete Concrete Gutters, Complete Masonry Works For Market Office, Bathroom Area, Rentable Spaces And Other Market Stalls, Complete Doors And Windows, Complete Two-unit Septic Tank, Complete Waste Water Treatment, Complete Plumbing Fixtures And Sanitary Works, Complete Catch Basin, Complete Water Pumping System, Complete Fire Alarm System, Structural Support For Electrical Works And Complete Electrical Works. Due To Budget Constrain, The Scope Does Not Include Painting On Other Market Stalls (except For Office Space And Exterior Walls), Steel Matting Ceiling For Some Rentable Spaces, Tactile Floor Tile, Perimeter Canal, Entrance Ramp, Plant Box, And Signage. Approved Budget For The Contract : ₱ 29,700,000.00 Contract Duration : 150 Calendar Days Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Size Range Small B, Pcab License Category Of (c & D) For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. The Contractor Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification. 4. Interested Bidders May Obtain Further Information From Department Of Public Works And Highways – Misamis Oriental First District Engineering Office And Inspect The Bidding Documents At Dpwh - Misamis Oriental First District Engineering Office, Gingoog City During Weekdays From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of ₱25,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Will Hold A Pre-bid Conference On November 21, 2024, 02:00 P.m. At Bac-conference Room, 3rd Floor, Dpwh-mofdeo, And/or Through Videoconferencing/webcasting Via Live Streaming: (youtube Page) Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq Which Shall Be Open To Prospective Bidders. 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. The Deadline For Issuance/ Downloading Of Bidding Documents (buying Of Bidding Documents) Will Be On December 05, 2024 Until 08:30 A.m. In Accordance With The Department's Citizen's Charter (attached As Annex "a") And Unnumbered Memorandum Dated December 27, 2001 (attached As Annex "b"), Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary C. Letter Of Intent (for Foreign Funded Projects) Bids Must Be Duly Received By The Bac Secretariat At Bac-conference Room, 3rd Floor, Dpwh - Misamis Oriental First District Engineering Office For Manual Submission Or At Electronicbids_misamisoriental1@dpwh.gov.ph For Electronic Submission On Or Before December 05, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 05, 2024, Immediately After The Deadline For The Submission Of Bid, At Bac-conference Room, 3rd Floor, Dpwh-mofdeo And Through Live Streaming: Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq (youtube Page) Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. In Consistent Of The Do 127 S 2018, “if At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid”. 11. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Marcelino O. Cabeguin, Jr., A.e.r. April Jane T. Pecasales Oic- Assistant District Engineer Engineer Ii Bac Chairperson Head, Bac Secretariat Dpwh-misamis Oriental 1st Deo Dpwh-misamis Oriental 1st Deo Brgy. 26, Gingoog City, Misamis Oriental Brgy. 26, Gingoog City, Misamis Oriental Tel/ No.: (088) 861-1185 Tel/ No.: (088) 861-1185 Email Address: Dpwhmofdeo@yahoo.com Email Address: Dpwhmofdeo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents : Www.philgeps.gov.ph : Www.dpwh.gov.ph For Online Bid Submission : Electronicbids_misamisoriental1@dpwh.gov.ph November 14, 2024 Approved By: Marcelino O. Cabeguin, Jr., A.e.r. Oic- Assistant District Engineer Bac Chairperson

Details: Description 1.contract Id 24 – 0069– S Contract Name Procurement Of Spare Parts For The Use Of Service Vehicle And Heavy Equipment Detailed In The Maintenance Section, Dpwh-quezon 4th District Engineering Office, Gumaca, Quezon Approved Budget For The Contract (abc) P 970,000.00 Purchase Request No: 2024-11-103 Contract Duration 15 Calendar Days Item No. / Description Unit Quantity Brake Cleaner (h2-401) Btl 2.00 Brake Paste (h2-401) Pc 1.00 Gear Oil (h2-401) Lit 8.00 Coolant Blue (h2-401) Lit 8.00 Radiator Flush (h2-401) Btl 1.00 Double Contact Bulb 24v (h2-401) Pc 2.00 Single Contact Bulb 24v (h2-401) Pc 2.00 Brake Fluid (h2-401) Btl 4.00 Fuel Pump Assy (h2-401) Assy 1.00 Fuel Filter Secondary (h2-401) Pc 1.00 Oil Filter (h2-401) Pc 1.00 Hi-temp Grease (h2-401) Lot 4.00 Brake Shoe (front And Rear) (h2-401) Set 2.00 Axle Oil Seal Rl & Fr (h2-401) Pc 2.00 Wheel Bearing Oil Seal (h2-401) Pc 4.00 Wheel Cylinder Fl & Fr (h2-401) Pc 4.00 Wheel Cylinder Rl & Rr (h2-401) Pc 4.00 Leaf Spring U-bolt L&r (h2-401) Pc 4.00 Egr Cleaner (h2-401) Btl 2.00 Gi Sheet 1.2m (h2-401) Sheet 4.00 Channel Bar 2.5x5 (h2-401) Pc 1.00 Channel Bar 2.5x3 (h2-401) Pc 5.00 Ms Plate 3mm (h2-401) Pc 5.00 Angular Bar 4mm X 1/2 (h2-401) Pc 3.00 Angular Bar 3.5 Mm (h2-401) Pc 1.00 Channel Bar 3.5 Mm (h2-401) Pc 3.00 Channel Bar 2x3 (h2-401) Pc 2.00 Angular Bar 8mm X 2 (h2-401) Pc 2.00 Gi Sheet 1.3 Mm (h2-401) Sheet 1.00 Gi Conn Sheet 10ft (h2-401) Sheet 1.00 Bisagra (h2-401) Pc 1.00 Drill 5/16 (h2-401) Pc 1.00 8mm X 30/25 Nut Washer (h2-401) Lot 22.00 Paint Materials (h2-401) Lot 1.00 A/c Materials (h2-401) Lot 1.00 Brake Pads (h1-6503) Set 1.00 Brake Shoe (h1-6503) Set 1.00 Lower Ball Joint, Lh & Rh (h1-6503) Pc 2.00 Upper Ball Joint, Lh & Rh (h1-6503) Pc 2.00 Tie Rod End (h1-6503) Pc 2.00 Shock Absorber, Double Action, Lh (h1-6503) Pc 2.00 Fan Belt (h1-6503) Set 1.00 Wiper Blades, Heavy Duty (h1-6503) Pc 2.00 Clutch Disc (h1-6503) Pc 1.00 Clutch Cover (h1-6503) Pc 1.00 Release Bearing (h1-6503) Pc 1.00 Pressure Plate (h1-6503) Pc 1.00 Tire Valve (h1-6503) Pc 4.00 Wheel Weights (h1-6503) Pc 4.00 Rack End (h1-6503) Pc 1.00 Battery 3sm (h1-7875) Pc 1.00 Brake Cleaner (h1-7875) Pc 1.00 Brake Paste (h1-7875) Pc 1.00 Brake Pads (h1-7875) Set 1.00 Brake Shoe (h1-7875) Set 2.00 Fuel Filter (h1-7875) Pc 1.00 Timing Belt (h1-7875) Pc 1.00 Tensioner Bearing Assy (h1-7875) Assy 1.00 Tensioner Assy (h1-7875) Assy 1.00 Turbo Actuator (h1-7875) Pc 1.00 Turbo (h1-7875) Pc 1.00 4x4 Actuator (h1-7875) Pc 1.00 Pressure Sensor (h1-7875) Pc 1.00 Pressure Sensor Socket (h1-7875) Pc 1.00 Rotor Disc (h1-7875) Pc 2.00 Radiator Assy (h1-7875) Assy 1.00 Radiator Upper Hose (h1-7875) Pc 1.00 Radiator Lower Hose (h1-7875) Pc 1.00 Bypass Hose (h1-7875) Pc 1.00 Tank Hose (h1-7875) Pc 1.00 Temperature Sensor (h1-7875) Pc 1.00 Coolant Reservoir (h1-7875) Pc 1.00 Lower Control Arm Bushing Big (h1-7875) Pc 1.00 Lower Control Arm Bushing Small (h1-7875) Pc 1.00 Differential Oil Seal (h1-7875) Pc 2.00 Lock Axle Bearing (h1-7875) Pc 2.00 Adjuster Camber Bolt (h1-7875) Pc 2.00 Wheel Bearing (h1-7875) Pc 1.00 Wheel Bearing Oil Seal (h1-7875) Pc 1.00 Shock Absorber Front (left And Right) Pc 2.00 Rack And Pinion Assy (h1-7875) Assy 1.00 Fog Light Assy (h1-7875) Assy 1.00 Tail Light Assy (h1-7875) Assy 1.00 Coolant (h1-7875) Lit 8.00 Radiator Flush (h1-7875) Btl 1.00 Brake Fluid (h1-7875) Lit 1.00 Power Steering Fluid (h1-7875) Lit 1.00 Air Filter (h1-7875) Pc 1.00 Cabin Filter (h1-7875) Pc 1.00 Filter, Air, Genuine (h1-6009) Pc 1.00 Filter, Cabin (h1-6009) Pc 1.00 Filter, Engine Oil Genuine (h1-6009) Pc 1.00 Filter, Fuel Genuine (h1-6009) Pc 1.00 Brake Shoe (h1-6009) Set 2.00 Brake Pads (h1-6009) Set 1.00 Brake Paste (h1-6009) Pc 1.00 Brake Cleaner (h1-6009) Btl 1.00 Wheel Bearing Front Inner (left Side) (h1-6009) Pc 1.00 Wheel Bearing Front Outer (left Side) (h1-6009) Pc 1.00 Wheel Bearing Rear Inner (left And Right) (h1-6009) Pc 2.00 Wheel Bearing Rear Outer (left And Right) (h1-6009) Pc 2.00 Wheel Bearing Oil Seal Rear Inner L&r (h1-6009) Pc 2.00 Wheel Bearing Oil Seal Rear Outer L&r (h1-6009) Pc 2.00 Wheel Bearing Oil Seal Front Inner L&r (h1-6009) Pc 2.00 Shimlock (h1-6009) Set 1.00 Engine Oil Filter (n1-2326) Pc 4.00 Fuel Filter Primary (n1-2326) Pc 4.00 Fuel Filter Secondary (n1-2326) Pc 4.00 Hydraulic Return Filter (n1-2326) Pc 4.00 Hydraulic Main Filter (n1-2326) Pc 4.00 Air Cleaner (n1-2326) Pc 4.00 Cabin Filter (n1-2326) Pc 4.00 X-x-x-x-x Nothing Follows X-x-x-x-x

Details: Statement Of Work (sow) uscgc Haddock fire Main Piping Repairs background: damaged Piping On Discharge Side Of Fire Main System. Damage Is Due To Corrosion And Has Created A Small Leak On Piping. Due To Level Of Corrosion A New Section Of Piping Will Need To Be Fabricated And Welded In Place. reference: coast Guard Drawings coast Guard Drawing 87 Wpb 521-001, Rev H, Firemain Piping. coast Guard Publications surface Forces Logistics Center Standard Specification 0740 (sflc Std Spec 0740), 2022, Welding And Allied Processes scope Of Work: task Description: crop And Renew Approximately Three (3) Linear Feet Of 2-1/2” Fire Main Piping And Associated Fittings/flanges From The Discharge Side Of The Fire/bilge Pump To The Flange Of The 2-1/2” Wafer Check Valve. See Elevation 42-e And Firemain Piping Diagram On Sheet 2 Of Coast Guard Drawing 87 Wpb 521-001 For Guidance. requirements: piping Renewals. Using Coast Guard Drawings 87 Wpb 521-001 As Reference, The Contractor Must Perform All Repair Tasks Designated In Task Description. renew Any Valve Label Plate That Is Unreadable, Damaged, Broken, Lost, Etc., As Applicable With The Appropriate Valve Designation As Shown On The Applicable Compartment Check-off List As Designated By The Coast Guard Inspector. hydrostatic Test. After All Authorized Repairs, The Contractor Must Hydrostatically Test All New And Disturbed Welded Piping And Components Of The Seawater Cooling And Firemain System In Accordance With Sflc Std Spec 0740, Appendix C, Hydrostatic Test. Ensure Zero Leakage From Or Permanent Deformation Of Pressure-containing Parts By Repairing All Leaks, Deformations, And Discrepancies. Submit A Cfr. leak Test. After Completing All Authorized Mechanical (i.e. Threaded, Bolted, Etc.) Joint Repairs, The Contractor Must Test The Seawater Cooling And Firemain System's Operation Using The System Fluid At Normal Operating Pressure. Ensure Zero Visible Leakage From Or Deformation Of Mechanical Parts By Repairing All Leaks And Discrepancies. Submit A Cfr. operational Test, Post Repairs. After Completion Of Work, The Contractor Must Thoroughly Test, In The Presence Of The Coast Guard Inspector And Demonstrate All Items Or Shipboard Devices That Have Been Disturbed, Used, Repaired, Altered, Or Installed To Be In Satisfactory Operating Condition. Submit A Cfr. touch-up Preservation. The Contractor Must Prepare And Coat All New And Disturbed Surfaces To Match Existing Adjacent Surfaces In Accordance With Sflc Std Spec 6310, Paragraph 3.1.13 (touch-ups And Minor Coating Repairs.) all Work Shall Be Accomplished With The Best Standard Practices, And By Workmen Thoroughly Experienced In The Required Trades. The Work Shall Be Supervised By Experienced Personnel And Shall Be Satisfactory To The Engineer Petty Officer. period Of Performance: contractor Shall Complete Repairs And Provide Deliverable Product Within 3 Weeks Of Contract Being Awarded. Approximate Dates To Begin Repair 01jul2024. place Of Performance: piping Has Been Removed By Ship’s Crew. Vendor Will Need To Have Adequate Facilities Or Equipment To Conduct Repairs With Piping Off Cutter. point Of Contact And Cutter Location: cpo Connor Green, 406-399-0209 uscgc Haddock (wpb-87347) 2710 N Harbor Dr san Diego, Ca 92101 phone: 406-399-0209 note: The Uscg/government Reserves The Right To Award On An All Or None Basis That Is The Government May Issue A Purchase Order (po) To The Offeror That Submits The Lowest Aggregate Price Rather Than Issue A Purchase Order To Each Offeror Based On The Lowest Quotation On Each Item. as Stated Below, The Provision At Far 52,212-2, Evaluation-commercial Items-applies With The Following Addenda: award Of A Contract Will Be Based On The Following Criteria: The Purchase Order Will Be Awarded As A Firm Fixed Price Contract Using Simplified Acquisition Procedures In Accordance With Far Part 13.5. 1. Please Provide Any Warranty Information. 2. Vendors Must Be Registered In Www.sam.gov the Uscg/government Intends To Award A Purchase Order Resulting From This Synopsis/solicitation To The Responsible Contractor Whose Quote Conformed To The Solicitation Which Will Be Most Advantageous And The Best Value To The Government, Price And Other Factors Considered. please Note: Interested Offerors Having The Expertise As Required Are Invited To Submit A Firm Fixed Price Quotation That Will Be Considered By The Agency. Quotations Must Be Submitted On Company Letterhead Stationery And Must Include The Following Information ( 1) Cost Breakdown, (2) Unit Cost, (3) Extended Price, (4) Total Price, (5) Payment Terms, (6) Discount Offered For Prompt Payment, (7) Company Unique Entity Id (uei) And Cage Code.. quotes Must Be Received No Later Than Thursday, June 27, 2024 At 09:00 A.m. Eastern Standard Time. Email Quotes Are Acceptable And Should Be Sent To Timothy Ford At Email Address – Timothy.s.ford@uscg.mil And Carbon Copy Stacy Spalding At Email Address Stacy.j.spalding@uscg.mil . any Questions Or Concerns Regarding Any Aspect Of The Rfq Must Be Forwarded To The Contracting Officer, Cwo3 Stacy Spalding At Email Address Stacy.j.spalding@uscg.mil And Carbon Copy Timothy Ford At Email Address Timothy.s.ford@uscg.mil . the Following Far Clauses And Provisions Apply To This Acquisition: far 52.212-1 - Instructions To Offerors - Commercial Items (oct 2018) far 52.212-2 - Evaluation - Commercial Items (oct 2014) Award Will Be Made To The Offeror Proposing The Best Value To The Government Considering Specification, Price, Past Performance And Quality. far 52.212-3 - Offeror Representations And Certifications - Commercial Items (oct 2018) To Include Alt I (oct 2014). Offeror Is To Complete The Annual Representations And Certification Electronically Via The System For Award Management (sam) Web Site Accessed Through Http://www.sam.gov . far 52.212-4 - Contract Terms And Conditions -commercial Items (oct 2018) With The Following Addenda's. far 52.212-5 - Contract Terms And Conditions Required To Implement Statutes Or Executive Orders - Commercial Items (jan 2019) the Following Clauses And Others As Indicated By The Contracting Officer As Applicable Shall Apply To This Awarded Contract. far 52.252-2 - Clauses Incorporated By Reference (feb 1998), The Full Text Of The Clause May Be Accessed Electronically At Internet Address Http://farsite.hill.af.mil/vffara.htm; A Data Universal Numbering System (duns) Number Is The Primary Identifier In Far 52.204-7 - System For Award Management (oct 2018). contractors Are Located And Identified In Sam By Their Uei Number. To Facilitate Payment Via Electronic Funds Transfer - Sam, Contractors Should Be Registered In Sam. A Uei Number Can Be Obtained Via Www.dnb.com And Sam Registration Can Be Obtained Via Www.sam.gov. the Following Clauses And Others As Indicated By The Contracting Officer As Applicable Shall Apply To This Awarded Contract. far 52.222-3 - Convict Labor (jun 2003) far 52.222-19 - Child Labor Cooperation With Authorities And Remedies ((jan2020) (e.o.13126). far 52.222-21 - Prohibition Of Segregated Facilities (apr 2015) far 52.222-26 - Equal Opportunity (sep 2016) far 52.222-35 - Equal Opportunity For Veterans (jun 2020) (38u.s.c.4212). far 52.222-36 - Equal Opportunity For Workers With Disabilities (jun 2020) (29u.s.c.793). far 52.222-37 - Employment Reports On Veterans (jun 2020) (38u.s.c.4212). far 52.222-50 - Combating Trafficking In Persons (oct 2020) (22u.s.c.chapter78 And E.o. 13627). far 52.223-18 - Encouraging Contractor Policies To Ban Text Messaging While Driving (aug 2011) far 52.225-1 - Buy American Supplies (jan2021) (41u.s.c.chapter83). (51) 52.225-13, Restrictions On Certain Foreign Purchases (jun 2008) (e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury).far 52.232-33 - Payment By Electronic Funds Transfer - Systems For Award Management (oct 2018) far 52.233-3 - Protest After Award (aug 1996) far 52.233-4 - Applicable Law For Breach Of Contract Claim (oct 2004) *the Above/following Clauses Are Incorporated By Reference, Entire Clause(s) Available At Http://www.arnet.gov/far. notice To Offerors Concerning Representations And Certifications: this Solicitation Contains Far Clause 52.204-7, Central Contractor Registration And Far Provision 52.204-8, Annual Representations And Certifications. In Accordance With Far 4.1201 (a) Prospective Contractors Shall Complete Electronic Annual Representations And Certifications Sam Accessed Via Https://www.acquisition.gov. Please Ensure Completion Prior To Submission Of Your Quote. Also Note That Paragraph (b) Of Far 52,204-8 Applies.