Pumps Tenders

Description: CATEGORY: Gasket for Size IV Dozer With Cat Part No 21710 , O Ring for Size IV Dozer With Cat Part No 178937 , Screen Filter or Stainer for Size IV Dozer With Cat Part 20622 No 21710 , Plug Drain for Size IV Dozer With Cat Part No 501390 , Gasket for Size IV Dozer With Cat Part No 121907 , Spring for Size IV Dozer With Cat Part No 68274 , O Ring for Size IV Dozer With Cat Part No 173368 , Gasket for Size IV Dozer With Cat Part No 8265 , Element Filter Lub Oil for Size IV Dozer With Cat Part No 3228067 , Gasket for Size IV Dozer With Cat Part No 173161 , Gasket Cover Lub Oil Cooler for Size IV Dozer With Cat Part No 68210 , Ring O Rubber for Size IV Dozer With Cat Part No 3019116 , Retainer O Ring for Size IV Dozer With Cat Part No 110827 , Gasket Housing to Block for Size IV Dozer With Cat Part No 121779 , Hose for Size IV Dozer With Cat Part No 63495 , Clamp for Size IV Dozer With Cat Part No 43828D , Pipe Water Bypass for Size IV Dozer With Cat Part No 32374667 , Hose for Size IV Dozer With Cat Part No HS0802400SS , Gasket Techometer Housing for Size IV Dozer With Cat Part No 70732 , Seal Technometer Drive for Size IV Dozer With Cat Part No 70809 , Seal Cap Filter for Size IV Dozer With Cat Part No 147901 , Screen filter For Size IV Dozer With Cap Part No 3234051 , Element or Service AR 3245217 for Size IV Dozer With Cat Part No 256834 , Gasket for Size IV Dozer With Cat Part No 151881 , Ring Rubber O for Size IV Dozer With Cat Part No 134736 , Elbow Connector for Size IV Dozer With Cat Part No129859 , O Ring for Size IV Dozer With Cat Part No129858 , Hose Fuel Filter To Pump for Size IV Dozer With Cat Part No HS1001500SS , Gasket Copper for Size IV Dozer With Cat Part No 94262 , Gasket Fuel Connection for Size IV Dozer With Cat Part No 70854 , Hose Drain To Tank for Size IV Dozer With Cat Part No HS08009300SS , Ring Sealing for Size IV Dozer With Cat Part No 160196 , Ring Rubber O for Size IV Dozer With Cat Part No 70624 , Gasket for Size IV Dozer With Cat Part No 70441 , Gasket for Size IV Dozer With Cat Part No 132730 , Spring for Size IV Dozer With Cat Part No 132721 , Element Corrosion Resister for Size IV Dozer With Cat Part AR95679 , Clamp Hose for Size IV Dozer With Cat Part No 43828 , Hose for Size IV Dozer With Cat Part No 63411 , Hose for Size IV Dozer With Cat Part No 64998H , Gasket for Size IV Dozer With Cat Part No 66258 , Clamp Hose for Size IV Dozer With Cat Part No 43828D , Hose Water By Pass for Size IV Dozer With Cat Part No632411 , Gsket Manofold To Cylinder Head for Size IV Dozer With Cat Part No142234 , Gasket for Size IV Dozer With Cat Part No 63575 , Gasket for Size IV Dozer With Cat Part No 3008591 , Gasket for Size IV Dozer With Cat Part No 501924 , Gasket for Size IV Dozer With Cat Part No 67946 , Elbow for Size IV Dozer With Cat Part No 68139 , Gasket for Size IV Dozer With Cat Part No 118273 , Gasket for Size IV Dozer With Cat Part No 501671 , Assy Element Inner for Size IV Dozer With Cat Part No 504209 , Assy Element Outer for Size IV Dozer With Cat Part No 504210 , Washer Rubber for Size IV Dozer With Cat Part No 504218 , Ring Rubber for Size IV Dozer With Cat Part No 504322 , Assy Pre Cleaner for Size IV Dozer With Cat Part No AR3246288 , Belt Fan for Size IV Dozer With Cat Part No 178622 , Clamp Hose for Size IV Dozer With Cat Part No 43828A , Clamp Hose for Size IV Dozer With Cat Part No 438223D , Hose for Size IV Dozer With Cat Part No 67185

Description: CATEGORY: Cap Hyd for SSL BOB CAT with Cat Part No 6727475 , Filter Oil for SSL BOB CAT with Cat Part No 6675517 , Fuel Filter for SSL BOB CAT with Cat Part No 6667352 , Hyd Element for SSL BOB CAT with Cat Part No 7024037 , Hose for Size IV Dozer With Cat Part No 67185H , Hose Water for Size IV Dozer With Cat Part No 505062 , Hose Water Seprator for Size IV Dozer With Cat Part No HS1011200SS , Hose water Seprator To Filter Fuel for Size IV Dozer With Cat Part No HS1002100SS , Toogal Swich for Size IV Dozer With Cat Part No 500278 , Indicator Light for Size IV Dozer With Cat Part No 501115 , Pressuer Gauge Fuel for Size IV Dozer With Cat Part No 500419 , Hose for Size IV Dozer With Cat Part No HS0400900MS , Negative Terminal for Size IV Dozer With Cat Part No 26101337 , Belt Alternator for Size IV Dozer With Cat Part No , Positive Terminal for Size IV Dozer With Cat Part No 26101327 , Positive Brush Connector for Size IV Dozer With Cat Part No 9030101 , Negative Brush Connector for Size IV Dozer With Cat Part No 903071 , Brush for Size IV Dozer With Cat Part No 9030644A , Split Pin for Size IV Dozer With Cat Part No 9030837 , Key Swich for Size IV Dozer With Cat Part No 070502000000 , Warming Lamp for Size IV Dozer With Cat Part No 610300030001 , Dash Lamp for Size IV Dozer With Cat Part No 070G03000000 , Rear Lamp for Size IV Dozer With Cat Part No 310800021400 , Front Head Lamp for Size IV Dozer With Cat Part No 310800021400 , Light Unit for Size IV Dozer With Cat Part No 26570021 , Cable and Bulb Holder for Size IV Dozer With Cat Part No 26840069 , Ammeter for Size IV Dozer With Cat Part No 071001502020 , Stainer for Size IV Dozer With Cat Part No 1300411120 , Hose for Size IV Dozer With Cat Part No HS0406000SS , Hose for Size IV Dozer With Cat Part No HS0402000SS , O Ring for Size IV Dozer With Cat Part No 0700003135 , Filter Oil for Size IV Dozer With Cat Part No 1301045111 , Hose Oil Pump to main Clutch Case for Size IV Dozer With Cat Part No 0726003216 , Stainer for Size IV Dozer With Cat Part No 1306013260 , Hose for Size IV Dozer With Cat Part No 0726003210 , Hyd Filter for JCB with Cat Part No 40 or 300893 , Throtal Cable for JCB with Cat Part No 332 or Y3852 , Fuel Filter for JCB with Cat Part No 02 or 910930 , Water Separator for JCB with Cat Part No 33 or Y2490 , Oil Filter for JCB with Cat Part No 02 or 910140A , Hyd Filter for JCB with Cat Part No 02 or 910155A , Hose Hyd for JCB with Cat Part No 625 or 80002 , Air Filter for JCB with Cat Part No 335 or Y2811 , Fuel Stainer for JCB with Cat Part No 332 or Y3299 , Side Cutter L for JCB with Cat Part No 40 or 303376 , Washer for JCB with Cat Part No 980 or 84768 , Hyd Filter 2nd for JCB with Cat Part No 335 or C7872 , Air Cleaner for JCB with Cat Part No 334 or Y2810 , Belt for JCB with Cat Part No 6009 or 3827Z , Nut for JCB with Cat Part No 173R020V2 , Belt for JCB with Cat Part No 6009 or 38262 , Cap Radiator for JCB with Cat Part No 332 or Y4005 , Climp Hose for JCB with Cat Part No 332 or Y3292 , Head Lub Oil Filter for JCB with Cat Part No 2910985 , Side Cutter R for JCB with Cat Part No 40 or 303377 , Tooth Bocket for JCB with Cat Part No 40 or 303603 , Bolt for JCB with Cat Part No 13050 or 0716Z , Nut for JCB with Cat Part No 1340 or 0701Z , Air Filter Outer for JCB with Cat Part No 32 or 915802 , Air Filer Inner for JCB with Cat Part No 32 or 915801 , Engine Oil Filter for JCB with Cat Part No 320 or 04134 , Fuel Filter for JCB with Cat Part No 320 or 070394

Description: Combined Synopsis/solicitation #: N0017825q6620 submitted By: Susan Madison naics Code: 334515 fsc/psc Code: 6650 anticipated Date To Be Published In Sam.gov: 06 November 2024 anticipated Closing Date: 15 November 2024 contracts Poc Name: Susan Madison telephone#: (540) 613-3296 email Address: Susan.h.madison.civ@us.navy.mil code And Description: 6650 – Optical Instruments Test Equipment, Components And Accessories this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. synopsis/solicitation N0017825q6620 Is Issued As A Request For Quotation (rfq). The Synopsis/solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through The Federal Acquisition Regulation As Indicated In The Attached Sf1449. The Sf1449 Form Is Being Utilized To Generate The Applicable Clauses From The Standard Procurement System. this Requirement Is Not Eligible For Small Business Set-aside. material Must Be Taa Compliant. the Naval Surface Warfare Center Dahlgren Division (nswcdd) Intends To Award On A Sole Source Basis For The Below Reflectometer With The Noted Options And Services Manufactured By Ultra Fast Innovations In Accordance With The Attached Statement Of Work (sow). Ultra Fast Innovations Is Located In Garching, Germany. quantity Item Description 1 Glacier-c 640-1100/1200-2000 Ultrafast Innovations Precision Cavity Ringdown Reflectometer. Output Spectrum 640-1100 Nm And 1200-2000 Nm. 99.995% Reflectance Measurement At 1080 Nm And 99.999% Reflectance Measurement At 640 Nm And 1645 Nm. 5-45 Degrees Angles Of I Incidence. 1 2” Reflectance Custom Sample Holder Additional Mount For 2” Optics 1 1” Transmission Rotation Custom Sample Holder Additional Rotational Mount For 1” Optics 1 1064 Nm Suppression Filter Filter To Suppress Pump Wavelength the Contractor Shall Unpack, Install, And Qualify The System At The Nswcdd Location In Accordance With 3.2 Of The Sow. the Contractor Shall Provide One Full Day Of Installation And On-site Instrument Instruction In Accordance With 3.3 Of The Sow. the Contractor Shall Provide Training On Software And Use Of The System After The Installation Is Complete In Accordance With 3.3.1 Of The Attached Sow. the Contractor Shall Coordinate With The Technical Point Of Contact (tpoc) Identified Below To Complete This Work After Issuance Of The Purchase Order In Accordance With 3.4 Of The Sow. all Travel Cost Shall Be In Accordance With The Joint Travel Regulations And Shall Be Provided On A Separate Clin. The Offeror Shall Ensure They Can Provide The Reflectometer And Services Outlined In The Sow. ultra Fast Innovations Is The Only Commercial System Meets Requirements Of Measuring Losses Of 5-1000 Parts Per Million, And For Wavelength Operation And Tuning Which Are 640-1100nm And 1200-2000nm Using A Supercontinuum Source. Ultrafast Innovations Owns The Patent For Using A Supercontinuum Source For Cavity Ring Down Measurements, Us 11,821,840 B2. please Include Shipping/freight Cost To Dahlgren, Va 22448-5114. Simplified Acquisition Procedures (sap) Will Be Utilized For Award In Accordance With Far Part 13. The Order Shall Be Firm Fixed Price. all Responsible Offerors Must Submit, With Its Offer, The Representation Required In Paragraph (c) Of Far Solicitation Provision 52.212-3. Offerors Must Complete The Following Representations When The Resulting Contract Is For Supplies To Be Delivered Or Services To Be Performed In The United States Or Its Outlying Areas, Or When The Contracting Officer Has Applied Far Part 19. All Offerors May Submit A Capability Statement, Proposal, Or Quotation Which Shall Be Considered By The Agency. The Completion And Submission To The Government Of An Offer Shall Indicate The Offeror’s Unconditional Agreement To The Terms And Conditions In This Solicitation. Offers May Be Rejected If An Exception To The Terms Or Conditions Set Forth In This Solicitation Is Taken. at Time Of Proposal Submission Please Submit Any Historical Data And Published Pricing. Award Will Be Made Based On Lowest Price Technically Acceptable. in Order To Be Eligible For Award, Firms Must Be Registered In The System For Award Management (sam). Offerors May Obtain Information On Registration In Sam By Calling 866-606-8220, Or Via The Internet At Https://www.sam.gov. quote Is Due 15 November, No Later Than 12:00 P.m. Est With An Anticipated Award Date By 3 December 2024. Questions And Responses Regarding This Synopsis/solicitation May Be Submitted By E-mail To Susan.h.madison.civ@us.navy.mil To The Rfq Closing. Please Be Sure To Include Synopsis/solicitation Number N0017825q6620 In The Subject Line. attachments – -sf1449: Solicitation For Commercial Items - Sow

Description: CATEGORY: SEAL KIT FOR OIL DISTRIBUTOR ONE RING TYPE TO DRG NO CAT PART NO 5330396077 , SEAL KIT FOR OIL DISTRIBUTOR TWO RING TYPE TO DRG NO CAT PART NO 5330396076 , DELIVERY HOSE TO DRG NO HOSE EN856 4SH SPRING GUARD , FILTER ELEMENT FOR TSW 310 25G B P G 6 01 E4 0 25P TO DRG NO FILTER ELEMENT 01TS31025GB , FILTER ELEMENT MF1801A10HBP01 FOR RLF MPF1811AG8A10HBP01 TE40A300 TO DRG NO FILTER ELEMENT MF1801A10HBP01 , FILTER ELEMENT 2 32H10LLP FOR PRESSURE LINE FILTER 400L32H10RMV4 4GP TO DRG NO FILTER ELEMENT 2 32H10LLP , FILTER ELEMENT 2 225H6P FOR PRESSURE LINE FILTER 25L225H6RMV4 4GP TO DRG NO FILTER ELEMENT 2 225H6P , SET OF SEALS FOR PUMP SIDE MODULE PVB32 157B5999 AND PVB32 157B6999 FOR PVG 32 VALVE TO DRG NO PVB32 157B5999 AND PVB32 157B6999 , ELECTRICAL ACTIVATION PVES 32 157B4832 FOR PVG 32 VALVE 1 AND 2 COMBINED 83036766 TO DRG NO PVES 32 157B4832 , BASIC MODULE PVB 32 157B6233 FOR PVG 32 VALVE 1 AND 2 COMBINED 83036766 TO DRG NO PVB32 157B6233 , SEALL KIT ELECTRICAL SIDE MODULE PVE 32 157B4997 AND SEAL KIT FOR LEVER SIDE MODULE TO DRG NO PVE32 157B4997 AND PVE BY PVMD32 157B , MECHANICAL ACTIVATION PVM 32 157B3171 FOR PVG 32 VALVE 1 AND 2 COMBINED 83036766 TO DRG NO PVM32 157B3171 , O RING ID 16 30 X CSD 2 40 TO DRG NO ID 16 DOT30XCSD 2 DOT40 , O RING ID 12 X CSD 2 TO DRG NO ID 12XCSD 2 , O RING ID 7 5 X CSD 1 5 TO DRG NO ID 7 DOT 5XCSD 1 DOT 5 , O RING ID 25 30 X CSD 2 40 TO DRG NO ID 25 DOT30XCSD 2 DOT 40 , ELASTOMERIC SEAL 3 BAR 4 BSP FOR PARALLEL MALE STUD COUPLING CP 20 SR TO DRG NO ELASTOMERIC SEAL THREE FOURTH INCH BSP , ELASTOMERIC SEAL HALF INCH BSP FOR MALE STUD COUPLING HALF INCH X16 GE16WSG04E TO DRG NO ELASTOMERIC SEAL HALF INCH BSP , ELASTOMERIC SEAL ONE FOURTH INCH BSP FOR PARALLEL MALE STUD COUPLING ONE FOURTH INCH 10 GE10WSG02E TO DRG NO ELASTOMERIC SEAL ONE FOURTH INCH BSP , ELASTOMERIC SEAL 1 INCH BSP FOR CHECK VALVE S 20 A 1 0 TO DRG NO ELASTOMERIC SEAL 1 INCH BSP , SEAL KIT FOR CYLINDER NO 1 PL NO 55 BAR 9 TO 55 BAR 17 AND 55 BAR 26 AS PER ISPL 2022 TO DRG NO SEAL KIT CYLINDER NO 1 , SEAL KIT FOR CYLINDER NO 2 PL NO 57 BAR 9 TO 57 BAR17 AS PER ISPL 2022 TO DRG NO SEAL KIT CYLINDER NO 2 , SEAL KIT FOR CYLINDER NO 3A AND 3B PL NO 59 BAR 19 TO 59 BAR 30 AS PER ISPL 2022 TO DRG NO SEAL KIT CYLINDER NO 3A AND 3B , SEAL KIT FOR LOCKING CYLINDER PL NO 65 BAR 5 TO 65 BAR 10 AS PER ISPL 2022 TO DRG NO SEAL KIT LOCKING CYLINDER , SEAL KIT FOR PUSHING CYLINDER PL NO 63 BAR 5 TO 63 BAR 10 AS PER ISPL 2022 TO DRG NO SEAL KIT PUSHING CYLINDER

Details: Description The Municipality Of Sibonga Through The General Fund Fy 2024 Intends To Apply The Sum Of Two Hundred Twenty-five Million Pesos Only (225,000,000.00), Construction/expansion Of Sibonga Water System (level Iii) In Barangay Lamacan, Poblacion, Lindogon, Simala, Sabang, Guimbangco-an, Candaguit, Abugon, Mangyan, Tubod, Bahay, Bagacay & Magcagong, Sibonga, Cebu, Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot. Bid Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Work Description Quantity Unit 1. General Requirements 1.1. Mobilization/demobilization 1 Unit 1.2. Contractors Field Office 20 Months 1.3. Signages & Barricades 1 Unit 1.4. Material Testing 1 Unit 1.5. Permits & Clearance (nwrb, Ecc & Dpwh Permits) 1 Unit 1.6. Project Billboards 2 Units 1.7. Construction Health & Safety 20 Months 2. Source Development 2.1. System 1 Spring Development (lamacan) 1 Lot 2.2. System 2 (well Drilling Including Submersible Pump At Simala) 1 Lot 2.3. System 4 (well Drilling Including Submersible Pump At Abugon) 1 Lot 2.4. System 4 (well Drilling Including Submersible Pump At Sabang) 1 Lot 2.5. System 5 (well Drilling Including Submersible Pump At Bagacay) 1 Lot 2.6. System 5 (well Drilling Including Submersible Pump At Bahay) 1 Lot 3. Construction Pipes 3.1. System 1: Pipe Laying/jointing 3.1.1. Hardrock Excavation 4,364 Cu.m 3.1.2. Sand Bedding 138 Cu.m 3.1.3. 8” Pe Pipe Sdr 13.6 4,021.65 Lm 3.1.4. 6” Pe Pipe Sdr 13.6 273.54 Lm 3.1.5. 4” Pe Pipe Sdr 13.6 2,761.74 Lm 3.1.6. 3” Pe Pipe Sdr 17 4,338.11 Lm 3.1.7. 2” Pe Pipe Sdr 17 7,207.7 Lm 3.1.8. Pipe Fittings 82 Units 3.1.9. Thrust Block 5 Cu.m 3.1.10. Disinfection 18,603 Lm 3.1.11. Backfilling 3,077 Cu.m 3.1.12. Hydrotesting 18,603 Lm 3.1.13. Transporting/disposing Of Unused Materials 1,287 Cu.m 3.2. System 2: Pipe Laying/jointing 3.2.1. Hardrock Excavation 2,402 Cu.m 3.2.2. Sand Bedding 77 Cu.m 3.2.3. 6” Pe Pipe Sdr 13.6 2,918.37 Lm 3.2.4. 4” Pe Pipe Sdr 13.6 984.33 Lm 3.2.5. 3” Pe Pipe Sdr 17 5,787.26 Lm 3.2.6. 2” Pe Pipe Sdr 17 702.27 Lm 3.2.7. Pipe Fittings 24 Unit 3.2.8. Thrust Block 3 Cu.m 3.2.9. Disinfection 10,393 Lm 3.2.10. Backfilling 1,703 Cu.m 3.2.11. Hydrotesting 10,393 Cu.m 3.2.12. Transporting/disposing Of Unused Materials 699 Cu.m 3.3. System 4: Pipe Laying/jointing 3.3.1. Hardrock Excavation 6,020 Cu.m 3.3.2. Sand Bedding 163 Cu.m 3.3.3. 8” Pe Pipe Sdr 13.6 1,745.31 Lm 3.3.4. 6” Pe Pipe Sdr 13.6 7,941.85 Lm 3.3.5. 4” Pe Pipe Sdr 13.6 3,536.96 Lm 3.3.6. 3” Pe Pipe Sdr 17 3,914.56 Lm 3.3.7. 2” Pe Pipe Sdr 17 1,369.37 Lm 3.3.8. Pipe Fittings 81 Units 3.3.9. Thrust Block 5 Cu.m 3.3.10. Disinfection 18,509 Lm 3.3.11. Backfilling 4,267 Cu.m 3.1.12. Hydrotesting 18,509 Lm 3.1.13. Transporting/disposing Of Unused Materials 1,987 Cu.m 3.4. System 5: Pipe Laying/jointing 3.4.1. Hardrock Excavation 8,998 Cu.m 3.4.2. Sand Bedding 240 Cu.m 3.4.3. 6” Pe Pipe Sdr 13.6 13,745.34 Lm 3.4.4. 4” Pe Pipe Sdr 13.6 7,287.47 Lm 3.4.5. 3” Pe Pipe Sdr 17 3,303.80 Lm 3.4.6. 2” Pe Pipe Sdr 17 2,774.65 Lm 3.4.7. Pipe Fittings 49 Unit 3.4.8. Thrust Block 7 Cu.m 3.4.9. Disinfection 27,112 Lm 3.4.10. Backfilling 6,466 Cu.m 3.4.11. Hydrotesting 27,112 Cu.m 3.4.12. Transporting/disposing Of Unused Materials 2,532 Cu.m 4. Assemblies 4.1. Stub-out 4.1.1. System 1 A. 25mm Dia. 3 Set B. 50mm Dia. 8 Set 4.1.2. System 2 A. 25mm Dia. 3 Set B. 50mm Dia. 5 Set 4.1.3. System 4 A. 25mm Dia. 5 Set B. 50mm Dia. 8 Set 4.1.4. System 5 A. 25mm Dia. 3 Set B. 50mm Dia. 8 Set 4.2. 25mm Air Release Valve 4.2.1. System 1 2 Set 4.2.2. System 2 2 Set 4.2.3. System 4 8 Set 4.2.4. System 5 3 Set 4.3. Blow-off 4.3.1. System 1 150mm Dia. 1 Set 4.3.2 System 2 100mm Dia. 2 Set 75mm Dia. 3 Set 4.3.3 System 4 200mm Dia. 1 Set 150mm Dia. 2 Set 50mm Dia. 3 Set 4.3.4 System 5 150mm Dia. 2 Set 100mm Dia. 2 Set 75mm Dia. 2 Set 50mm Dia. 2 Set 4.4. Fire Hydrant 4.4.1. System 1 1 Set 4.4.2. System 2 1 Set 4.4.3. System 5 1 Set 4.5. Flow Meter / Discharge Assembly 4.5.1. System 1 1 Set 4.5.2. System 2 1 Set 4.5.3. System 4 2 Set 4.5.4. System 5 2 Set 5. Concrete Works 5.1. Reservoir 5.1.1. System 1 200 Cubic Meters 200 Cu.m 5.1.2. System 2 150 Cubic Meters 150 Cu.m 5.1.3. System 4 250 Cubic Meters 250 Cu.m 50 Cubic Meters 50 Cu.m 5.1.4. System 5 250 Cubic Meters 270 Cu.m 50 Cubic Meters 50 Cu.m 5.2. Chlorinator House Incl. Equipment 5.2.1. System 1 1 Set 5.2.2. System 2 1 Set 5.2.3. System 4 1 Set 5.2.4. System 5 1 Set 5.3. Pump Control House 5.3.1. System 2 1 Set 5.3.2. System 4 2 Set 5.3.3. System 5 2 Set 5.4. Demolition And Restoration Of Pavement 5.4.1. System 1 1 Set 5.4.2. System 2 1 Set 5.4.3. System 4 1 Set 5.4.4. System 5 1 Set 6. Power Supply; Transformer With Complete Accessories 6.1. System 2 1 Lot 6.2. System 4 2 Lot 6.3. System 5 2 Lot The Municipality Of Sibonga Now Invites Bids For The Abovementioned Procurement Project. Completion Of The Works Is Required Within Six Hundred (600) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From The Municipality Of Sibonga And Inspect The Bidding Documents Or One May Call The Secretariat At (032) 486-0551 From Monday To Friday 8:00 A.m To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 9 – February 4, 2025 At Municipality Of Sibonga, Poblacion, Sibonga, Cebu And Upon Payment Of A Nonrefundable Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Php. 50,000.00 To The Municipal Treasurer’s Office. The Municipality Of Sibonga Will Hold A Pre-bid Conference On January 20, 2025 (10:00 A.m) At Multi-purpose Building, Bac Office, Poblacion, Sibonga, Cebu Which Shall Be Open To Prospective. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipality Of Sibonga, Multi-purpose Building, Bac Office, Poblacion, Sibonga, Cebu On Or Before February 4, 2025 (10:00 A.m). Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On February 4, 2025 (10:00 A.m) At Multipurpose Building, Bac Office, Poblacion, Sibonga, Cebu. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Municipality Of Sibonga Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Fy23 Missile Assembly Support Building Tactical Equipment Maintenace Facility (temf), White Sands Missile Range (wsmr), Dona Ana County, New Mexico the Proposed Procurement Is An Unrestricted, Open To Both Large And Small Businesses, Lowest Price Technically Acceptable (lpta) Request For Proposal (rfp). Naics Is 236220, With A Size Standard Of $45,000,000.00. The Magnitude Of Construction For This Project Will Be Between $25,000,000.00 And $100,000,000.00. Bonding Will Be Required For This Acquisition. Offerors Attention Is Directed To Section 00 21 00 In The Solicitation For Information Regarding The Tour Of The Site. Plans Will Be Issued On Or About 06 January 2025, With Proposals Due On Or About 20 February 2025. Offerors Are Advised That This Requirement May Be Delayed, Cancelled, Or Revised At Any Time During The Solicitation, Or Final Award Process. the Project Consists Of Construction Of A Launcher Maintenance, Missile Assembly Support Facility At White Sands Missile Range, New Mexico. The Project Includes An 18,800 S.f. Vehicle Maintenance Facility Including Maintenance Bays, Wash Bay, Repair Bays, Machine Shop/welding Area, Maintenance Pit, Training Rooms, Offices, And Security Vaults. Facility Includes 2,300 S.y. Tactical Organizational Vehicle Parking And Apron, Petroleum And Hazardous Waste Storage Buildings, Cybersecurity And Antiterrorism/force Protection (at/fp) Measures, Building Information Systems, Fire Protection And Alarm Systems, Lightning Protection And Grounding System, Intrusion Detection System (ids), Electronic Access Control System (acs), Energy Monitoring Control Systems (emcs) Connection, Vehicle Exhaust System, Petroleum Oil And Lubricants (pol) Distribution Systems, And A 10-ton Bridge Crane. Sustainability And Energy Enhancement Measures Are Included. Photovoltaic Power Will Be Provided By Two Parking Structure Roof-top Arrays And Two Roof-top Arrays On The Vehicle Maintenance Building. Supporting Facilities Include Site Development, Utilities And Connections, Storm Drainage, Paving, Parking, Walkways, Lighting, Information Systems, Landscaping, And Signage. Heating Will Include A Hot Water Heating System With High Efficiency Boiler, Pumps, And Piping Distribution. Cooling Will Be Provided By A Direct Expansion (dx) Based Cooling System With High Efficiency Air-cooled Condensing Units. Maintenance Bays Will Be Cooled By High Efficiency Evaporative Cooling Units And Heated By A Low Intensity Infrared Radiant Heating System. Measures In Accordance With The Department Of Defense (dod) Minimum Antiterrorism For Buildings Standards Will Be Provided. Comprehensive Building And Furnishings Related Interior Design Services Are Required. Access For Individuals With Disabilities Will Be Provided As Appropriate. Facilities Will Be Designed To A Minimum Life Of 40 Years In Accordance With Dod’s Unified Facilities Criteria (ufc 1-200-02) Including Energy Efficiencies, Building Envelope And Integrated Building Systems Performance. The Facility Will Be Designed And Constructed To Achieve Leed Silver Certification. the Project Will Be Advertised As A Request For Proposal. Competitive Proposals Will Be Evaluated Based On The Evaluation Criteria Set Forth In The Solicitation Package. Evaluation By The Government Will Result In Selection Of A Firm That Represents The Best Value To The Government. The Proposed Procurement Will Result In A Firm-fixed Price Contract. Offerors Must Be Registered With System For Award Management (sam), In Order To Receive A Government Contract Award. To Register, The Sam Internet Address Is: Https://sam.gov/content/home. this Solicitation Will Be Issued Via Internet Only. Notification Of Amendments Shall Be Made Via Internet Only, As Well. It Is Therefore The Contractors’ Responsibility To Check The Following Address Daily For Any Posted Changes To This Solicitation. For Security Reasons, All Technical And Engineering Data Related To This Solicitation Will Be Distributed Using The Sam.gov System. Sam.gov Is A Web-based Dissemination Tool Designed To Safeguard Acquisition-related Information For All Federal Agencies. Interested Offerors Must Register With Sam.gov Or They Will Not Be Able To Download Information From The Site. Registration Instructions Can Be Found On The Website At Https://sam.gov/content/home. Contractors Registered With Sam.gov May View And/or Download This Solicitation And All Amendments From The Internet After Solicitation Issuance. Offerors Are Encouraged To Post Notices Of Prospective Subcontracting Opportunities On The Website. Offerors Are Advised That This Requirement May Be Delayed, Cancelled, Or Revised At Any Time During The Solicitation, Or Final Award Process.

Description: Contact Information|4|n7m1.16|hfc|717-605-2828|dakota.s.bentzel.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo||tbd|n00104|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| option For Increased Quantity (mar 1989)|1|365 Days| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| annual Representations And Certifications (may 2024)|13|333914|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To Increase The Quantity From 1 Each To 2 Each And Extend The Offer Due Date To 1/10/2025. this Amendment Makes No Other Changes. Accelerated Delivery Is Encouraged And Accepted Before The Delivery Date(s) Listed In The Schedule. ^^ all Freight Is Fob Origin. this Rfq Is For A Buy. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractors Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. government Source Inspection Is Required. Unit Price:__________ Firm Total Price:__________ Firm Procurement Turnaround Time (ptat) :__________ Awardee Cage: __________ Inspection & Acceptance Cage, If Not At Source:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________ important Traceability Notice: If You Are Not The Manufacturer Of The Material You Are Offering, You Must Provide A Letter/official Email From The Oem Confirming Your Company Is An Authorized Distributor Of Their Items. the Government Intends To Add An Option Quantity To The Resultant Contract. In Reference To The Option Quantity, The Government May Increase The Quantity Of Supplies Called For In The Schedule At The Unit Price Specified. The Contracting Officer May Exercise The option By Written Notice To The Contractor Within The Number Of Days In Far 52.217-6 Herein. Delivery Of The Added Items Shall Continue At The Same Rate As The Like Items Called For Under The Contract, Unless The Parties Otherwise Agree. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Pump,rotary . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Pump,rotary Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;07524 E-4519 Piece 48; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161.

Details: Legal Notice To Bidders Sealed Bids For The Construction Of Fairhaven Raw Water Well Replacement Project, Will Be Received By The City Of Olive Branch At 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654 Until 2:00 P.m. Local Time On Monday, January 13, 2025, And Thereafter Will Be Opened And Publicly Read. The Project Consists Generally Of The Construction Of One 1,000 Gallon Per Minute Raw Groundwater Supply Well, Including All Drilling, Test Holes, Raw Water Analysis, Reaming, Casings, Screen, Gravel Wall, Well Development, Well Testing, Well Cleaning, Cctv Inspection, Construction Of Pump Foundation, Well Pump, Discharge Head, Column Assembly, Shafts, Suction Pipe, Electric Motor, Water Level Indicator, Pressure Gauge, Discharge Piping, Check Valves, Flow Meter, Gate Valves, Insulation, Connection To The Existing Raw Water Line, Painting, Electrical And Controls, Site Work, Fencing, Site Restoration, Final Cleaning, And All Other Necessary And Appurtenant Work Required To Complete The Work As Described In These Specifications And Detailed In The Drawings. A Non-mandatory Pre-bid Meeting Will Be Held At 2:00 P.m. On Monday, January 6, 2025, In The 1st Floor Conference Room Of City Hall Located At 9200 Pigeon Roost Road, Olive Branch, Mississippi. Plans, Specifications And Contract Documents May Be Picked Up At The Office Of Karen Mcneil, Purchasing Manager, 9200 Pigeon Roost Road, Olive Branch, Mississippi (662-892-9208) Or Via Email At Karen.mcneil@obms.us. In Addition, Official Bid Documents Can Be Downloaded From Central Bidding At Www.centralbidding.com. Electronic Bids Can Be Submitted At Www.centralbidding.com. Electronic Bids Are Due The Same Time And Date As Sealed Bids. For Any Questions Relating To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. Each Bid Must Be Submitted In A Sealed Envelope, Addressed To The City Clerk, City Of Olive Branch, 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654. Each Envelope Must Be Plainly Marked On The Outside As “re-bid Fairhaven Raw Water Well Replacement Project” And Must Bear On The Outside The Date The Bid Is To Be Opened. Opened Bids Will Be Presented For Consideration At A Regular Meeting Of The Mayor And Board Of Aldermen Of The City Of Olive Branch. Each Bid Shall Be Accompanied By A Bidder’s Bond Issued By A Surety Company Licensed To Operate In The State Of Mississippi, In The Amount Of 5% Of The Total Bid Price, As A Guarantee That If The Bid Is Accepted, The Bidder Will Enter Into A Contract And Execute The Performance And Payment Bonds In The Form And Within The Time Specified. The Successful Bidder Will Be Required To Execute A Performance Bond And A Payment Bond, Each In The Amount Of 100% Of The Contract, Issued By A Surety Company Licensed To Operate In The State Of Mississippi And Shall Be Named In The Current List Of "companies Holding Certificates Of Authority As Acceptable Sureties On Federal Bonds And As Acceptable Reinsuring Companies" As Published In Circular 570 (amended) By The Audit Staff Bureau Of Accounts, U.s. Treasury Department. Each Bidder Shall Have A Certificate Of Responsibility To Bid On Contracts For Public Projects In Which The Bid Price Exceeds $50,000.00 And For Private Projects In Which The Bid Price Exceeds $100,000.00 As Required By The Laws Of The State Of Mississippi. Each Bidder Shall Show On The Outside Of The Envelope Containing His Bid: His Current Certificate Of Responsibility Number And Expiration Date Or If Applicable, A Statement Certifying That The Bid Enclosed Does Not Exceed $50,000.00 For A Public Project Or $100,000.00 For A Private Project. Failure To Show These Items On The Outside Of The Envelope Containing The Bid Will Result In The Bid Being Returned To Bidder Unopened. No Bidder May Withdraw His Bid For A Period Of Sixty (60) Days After Date Of Actual Bid Opening, Without The Owner's Consent. The City Of Olive Branch Reserves The Right To Reject Any Or All Bids In Whole Or In Part, With Or Without Cause; And To Accept The Lowest Bid Which In Its Judgment Will Be For The Best Interest Of The City Of Olive Branch. Witness My Signature This The 19th Day Of November, 2024. /s/ Tena Stewart, City Clerk

Description: Restricted invitation to tender with public participation competition VOB/A construction work This is preliminary information with a call for competition. Sanitary/heating trade, conversion of house G8, ground floor/1st floor, sanitary: Ug/eg: 245 M PP sewage pipes DN 50 - ... More This is preliminary information with a call for competition. Sanitary / heating trade Conversion of house G8 Ground floor / 1st floor Sanitary: Ug/eg: 245 m PP wastewater pipes DN 50 - DN 100 42 pcs. sanitary objects and accessories 930 m stainless steel drinking water pipes DN 15 - DN 32 including insulation 1 pc. fresh water station with buffer tank 1 pc. fire extinguishing dry system with 1 feed point, 3 extraction points 35 m galvanized pipes DN 50 - DN 80 dismantling 110 m SML pipe, 135 m galvanized drinking water pipes 50 pcs sanitary objects Og1: 50 m PP wastewater pipes DN 50 - DN 100 15 pcs. sanitary objects and accessories 130 m stainless steel drinking water pipes DN 15 - DN 20 including insulation dismantling 80 m SML pipe, 100 m galvanized drinking water pipes 40 pieces sanitary objects Heating: Ug/eg: 19 pieces radiators (tubular radiators) 200 pieces pipes DN 15 - DN 50 including insulation 66 pieces heating fittings DN 15 - DN 32, 1 piece circulation pump Dismantling: 140 m heating pipes, 10 pieces radiators Og1: 9 pieces radiators (tubular radiators) 70 pieces pipes DN 15 - DN 20 including insulation Dismantling: 20 m heating pipes, 5 pieces radiators Companies can informally express their interest in participating in the OA tendering procedure. Documents can be requested from Mail@fm-zennern.de by January 31, 2025, stating the HAD reference number.

Description: Request For Information - Sources Sought naval Air Warfare Center, Aircraft Division Lakehurst, Nj rsd Depot Level Repair Facility - Request For Information/sources Sought (rfi) introduction: this Request For Information (rfi) Is Issued Pursuant To Far 15.201(e) And In Conformance With Dfars Pgi 206.302.this Is A Request For Information/sources Sought (rfi) Notice To Solicit Comments, Questions And Feedback From Industry Regarding Their Interest In And Capacity To Conduct A “depot Level” Repair/overhaul Of An Electro-hydraulic Device (rapid Securing Device (rsd)). The Rsd Is One Of The Main Assemblies Of A Us Navy Helicopter Landing System Called Recovery Assist, Securing, And Traversing (rast). The Rsd Is Installed On Multiple Us Navy Vessels And Is Used To Secure And Maneuver Military Helicopters On The Flight Deck. nawcad Lakehurst Is Requesting To Establish An Independent Overhaul Facility Which Will Supplement Existing Organic Repair/overhaul Capacity With The Capability To Refurbish Approximately 18-24 Rsds Per Year. The Repair/overhaul Involves Disassembly, Corrosion Control, Inspection And Testing Of Numerous Parts And Assemblies, Changeout Of Mandatory Parts, Reassembly, And Functional As Well As Load Testing. interested Parties May Submit Technical Literature/brochures On Solutions That Meet These Material Requirements. Any Relevant Information May Also Be Submitted For Consideration To Aid In Refinement Of This Requirement. this Rfi Is Not A Request For Proposal: it Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Providing Services Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Notice. eligibility: the Psc For This Requirement Is J017 (maintenance, Repair, And Rebuilding Of Equipment- Aircraft Launching, Landing, And Ground Handling Equipment). Naics Is 811310 (commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance). All Interested Businesses Are Encouraged To Respond. submittal Information: it Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Statement Package Demonstrating Ability To Meet The Requirements Outlined In Description. Responses Must Include 0610-rsd Overhaul Facility In Subject. This Documentation Must Address, At A Minimum, The Following: company Contact Information To Include: Company Name, Company Address, Cage Code, Company Business Size, And Point-of-contact (poc) Name, Phone Number, Fax Number, And E-mail Address. company Profile To Include: Number Of Employees And Duns Number; statement Regarding Capability: if You Are A Small Business, Provide An Explanation Of Your Company's Ability To Perform At Least 50% Of The Tasking Described In The Specifications. the Capability Statement Package Shall Be Sent Via Email To Air- 2.5.2.5.2 Navair Lakehurst Contracts, Zaib Nageeb, Zaib.nageeb.civ@us.navy.mil . Submissions Must Be Received At The Office Cited No Later Than 5:30 P.m. Eastern Standard Time On 4 October 2024. description: general Rsd Information: overall Dimensions – 100 X 70 X 14 Inches weight – 3200 Lbs hydraulic Fluid – Mil-h-83282a electrical – Input: 200v +/- 10% 3 Phase 400 Hz +/- 10% Current: Full Load – 6.7a Start Up - 25a representative Components: Accumulator, Hydraulic Actuators, Chains, Wire Rope Cables, Mechanical Linkages, Steel Plates, Machined Parts, Hydraulic Piping, Hydraulic Pump And Motor, Filter, Pulleys. how To Respond: all Interested Parties Must Submit Written Responses, Preferably Via Electronic Mail Within Fifteen (15) Days After Release Of This Rfi With Product Information That Meets All Or A Subset Of The Aforementioned Attributes. Please Submit Your Response To This Rfi Via E-mail No Later Than 4 October 2024, 5:30 Pm Edt To Contract Specialist, Zaib Nageeb At Zaib.nageeb.civ@us.navy.mil. The Navy Does Not Intend To Award A Contract On The Basis Of This Request Or Otherwise Pay For The Information Solicited. While The Navy Intends To Use This Information For Future Acquisition Planning Purposes, It Will Not Release Any Information About Your Approach That Might In Any Way Compromise Your Competitive Posture Or Proprietary Information. The Navy Will Not Use Any Information Provided To Level Your Company’s Approach Relative To Another Competitor. All Information Received In Response To This Rfi That Is Marked Proprietary Will Be Handled Accordingly. The Navy Will Not Be Liable For Or Suffer Any Consequential Damages For Any Proprietary Information Not Properly Identified. Proprietary Information Will Be Safeguarded In Accordance With The Applicable Navy Regulations. Responses To This Rfi Will Not Be Returned. Respondents Will Not Be Notified Of The Result Of The Review. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Associated Rfp/rfq That May Be Issued. Information Provided In No Way Binds The Navy To Solicit Or Award A Contract. If A Solicitation Is Released, It Will Be Synopsized On The System For Award Management (sam) Website: Www.sam.gov. It Is The Potential Vendor's Responsibility To Monitor This Site For The Release Of Any Follow-on Information.