Pumps Tenders

Details: Energy Systems Catapult (esc) Is Looking To Engage With Suitable Suppliers Who Are Highly Experienced With The Installation, Maintenance And Decommissioning Of Smart Heating Systems, Home Electric Vehicle (ev) Charge Points, Domestic Renewable Energy Measures, Meter Reading Technology, Home Energy Management Systems, And Air Quality Monitoring Systems. Esc Is Particularly Looking To Expand Its Supply Base In Scotland, Including Islands, The Highlands, And Other Rural And Remote Parts Of Scotland. This Is To Cater For A Large Upcoming Scottish Project, Involving Over 300 Living Lab Homes, And With A Potential Annual Budget Of Up To £900k To Be Spent On Installations, Maintenance And Decommissioning. Below You Will Find The Details Of How To Apply To Be An Appointed Supplier With The Minimum Criteria You Must Meet In Order To Be Appointed. All Suppliers Who Meet The Selection Criteria Will Be Appointed To The Ll2.0 Dps And There Is No Limit On The Number Of Suppliers Who Can Be Appointed. Suppliers Can Apply To Join The Dps At Any Point During Its Lifetime. It Is Currently Envisaged To Run For At Least 3 Years And May Well Be Extended Providing It Is Still Fit For Purpose. Esc Operates From Offices In Birmingham. Installations Will Be Required In Homes Throughout England, Scotland And Wales. Project Meetings May Be Required. Appointed Suppliers May Be Required To Attend Kick Off Meetings At Esc Office In Birmingham Or Any Suitable Location In The Uk And/or Via A Conference Call Using One Of The Conferencing Services Such As Ms Teams, Skype Or Global Meet Whichever Esc Is Using At That Time. Lots Lot 1 Installation And Maintenance Of Smart Heating Controllers/ Systems (tado Or Equivalent) Lot 2 Installation And Maintenance Of Electric Vehicle Charging Stations/points. Lot 3 Installation And Maintenance Of Home Energy And Efficiency Measures(heat Pumps, Pv /solar Systems, Insulation, Infrared Etc) Lot 4 Installation, Maintenance And Decommissioning Of Home Energy Monitoring (eg. Hildebrand Cads, Heat Meters, Current Clamps, Smart Things, Aeotec, Northq) Lot 5 Installation, Maintenance And Decommissioning Of Home Energy Management Systems Lot 6 Installation, Maintenance And Decommissioning Of Air Quality Monitoring Systems Lot 7 Domestic Energy Performance Assessment And Issuing Of Energy Performance Certificates (epc) Lot 8 Home Energy Efficiency And Retrofit- Installer Management Team To Apply To Join The Ll 2.0 Dps Framework Please Request An Application Pack From The Following Email : Procurement@es.catapult.org.uk Your Email Should Be Entitled In The Subject Line : "ll 2.0 Dps Application" Any Questions Should Also Be Sent To This Email Address And Use The Same Subject Title.

Details: Description Item Description Abc Unit Quantity 1 Insulin Syringe 1cc, Thickness: Not Less Than G-30x5/16" (100's/box) Sterile 594,000.00 Piece 49,500.00 2 Syringe Disposable (1ml G-26 X 1/2) Luer Lock Tip (100's/box) 1,219,800.00 Piece 128,400.00 3 Syringe Disposable 3ml G-23 X 1", Luer Lock Tip (100's/box) Sterile 2,423,200.00 Piece 302,900.00 4 Syringe Disposable 5ml G 23 X 1", Luer Lock Tip (100's/box) Sterile 3,035,700.00 Piece 337,300.00 5 Syringe Disposable 10ml G-23 X 1", Luer Lock Tip (100's/box) 3,859,000.00 Piece 385,900.00 6 Syringe Disposable 20ml (50's/box), Luer Lock Tip , Sterile 319,000.00 Piece 14,500.00 7 Syringe Disposable (30ml) 907,500.00 Piece 33,000.00 8 Syringe Disposable 50ml, Luer Lock Tip (50's/box) 927,850.00 Piece 24,100.00 9 Syringe Disposable 60ml, Luer Lock Tip 20,000.00 Piece 400.00 Terms Of Reference (p.r. No: 2024-08-0931) • Items No. 1 To 9 Lot Bid • Mode Of Delivery: *within Twenty (20) Calendar Days Upon Receipt Of The Call-off. • The Authorized Representative Should Notify The Materials Management Section Personnel At Least One (1) Day Before The Delivery Arrives For Proper Warehousing Management. • A Copy Of Purchase Order (po) Must Be Presented During Delivery To Ascertain Which Specific Po The Item(s) Corresponds To, Especially In Cases Where Bidders Are Awarded With Multiple Contracts. • All Items To Be Delivered Must Be Securely Packaged In Crdboard Boxes, Particularly Loose Items, To Safeguard The Contents Against Damage, Maintain Sterility And Cleanliness, And Display Essential Information Such As Manufacturing Date, Expiration Date, Temperature Requirements, And Lot Number. • All Medical Supplies To Be Delivered Must Have A Minimum Expiration Period Of 2 Years From Date Of Delivery. If The Expiration Period Is Less Than 2 Years, Guarantee Letter Is Required Stating That The Supplier Shall Replace These Items Within 3 Months Prior To The Expiration Date. • For Items Lacking An Expiration Date, A Certification From The Manufacturer Should Be Provided, Indicating The Products Shelf Life Starting From The Manufacturing Date. • All Supplies To Be Delivered Must Strictly Adhere To The Specified Requirements And Brand. Any Items Found Not Conforming To Any Of The Requirements During Inspection Will Be Rejected, Unless Accompanied By A Letter Granting Prior Approval For A Change In Specification Or Brand. • A Safety Data Sheet (sds), Consisting Of 16 Sections And Updated Within 5 Years Must Be Provided During Delivery. If No Changes Have Been Made, A Certification Letter Should Accompany The Sds To Substantiate This Claim. This Requirement Applies Only To Supplies For Which A Safety Data Sheet Is Necessary. Terms Of Reference (pr# 2024-08-0931) (lot Bid) 1. Free Use Of 35 Units Syringe Pumps. 2. Free Use Syringe Pump While Supplies Last. 3. Equipment Must Be Compatible With The Supplies To Be Delivered. 4. Repairs, Maintenance And Calibration Of Said Items Will Be The Responsibility Of The Supplier. 5. In Case Of Damage Or Malfunction, Supplier Must Repair Or Replace Said Unit Within 24 Hours. 6. All Supplies Should Have At Least Two (2) Years Of Expiration From The Date Of Delivery. 7. The Winning Bidder Should Provide A Guarantee Letter For Less Than Two (2) Years Expiry And Replace Near Expiry Items Three (3) Months Prior To Expiration Date. Total Abc 13,306,050.00

Details: Description 1 Lot Water Truck 4000l Cab & Chasis Specifications Drive` : 4x2 (6-wheeler) Type : 4 Stroke-cycle, Water Cooled, Direct Injection Diesel Engine Engine : D4ga15 (euro-4) Displacement : 3,933cc Max Power : 150ps @ 2,500rpm Max Torque : 59 Kg-m @ 1,400 Rpm Turbocharger : Turbo Charger Intercooler Air Cleaner : Cyclonic Dry Paper Element Fuel Tank Capacity : 100 L,steel Max Speed : 132 Kph Gradeability (tan) : 46.1 Type Clutch : Hydraulic Control, Diaphragm Spring, Single Dry Plate Facing Material : Non – Asbestos Transmission Model: T060s5 (5-speed Mt) Pto : With Transmission Type : 5 Forward And 1 Reverse Speed Battery : 24v-90ah Mf Alternator : 24v-55a Starter : 24v-5.0kw Chassis Cab : Tilt Type With Torsion Bar, All Steel Welded Construction With Safety Zone Design Frame : “h” Type Frame With Channel Sectional Side Rail & Cross Members, Side Rail Is Reinforced With Outer Stiffeners Steering : 2-spoke, Ball-nut Type, Tilt & Telescopic Steering Column, Power Assist Suspension (front/ Rear) : Semi-elliptic, Laminated Leaf Springs With Shock Absorber Shock Absorber : Hydraulic Double Acting Telescopic Type On The Front & Rear Axles Brakes (service Brake) : Hydraulic With Vacuum Servo Assistance, Dual Circuit (parking Brake) : Internal Expanding Type On Propeller Shaft At The Rear Of Transmission Assy. (auxillary Brake) : Exhaust Brake: Vacuum Operated, Butterfly Valve Type Tire (single Front,) : 7.00 X 16 -10pr (dual Rear) : 5.50 F X 16 Sdc -115 Axle (front) : Reverse Elliot Type “i” Beam (capacity Kg) : 2,600 (rear) : Full Floating Type (capacity Kg) : 4,700 Curb Weight (kg) : 2,630 Payload Capacity (kg) : 3,870 Gvw (kg) : 6,500 Wheelbase (mm) : 3,415 Overall Length (mm) : 6,170 C/cab Width (mm) : 2,000 Height (mm) : 2,250 Overhang Front (mm) : 1,120 C/cab Rear (mm) : 1,635 C.a (cab To Rear Axle) (mm) : 2,875 C.e (cab To End Of Frame) (mm) : 4,455 Min. Ground Clearance (mm) : 195 Driver’ Seat : Urethane Foam Cushioned Adjustable To The Front & Rear/reclining, Vinyl Material Assistant’s Seat : Bench Seat, Stimulated Leather Material (std) Reverse Warning Buzzer : With Air Conditioning : With Seatbelts : 3-point Elr (driver And Passenger) Water Tanker Specifications: Structural Frameworks : All Steel Electrically Welded And/or Bolted Chassis Sub-frame : Machine Pressed Channel 4.5mm Thk X 50mm X 100mm With U-bolt And I-bolt Anchorage Anchorage : 20.0 Ø Mm U-bolt And I-bolt With Plate Strap Body Shell : 4.0mm (ss304) Thk Gi Sheet Body In Two (2) Compartments (elliptical Shape), 2000 Liters Per Compartment With Baffles Plate, Reinforcing Bars And Other Tank Internal Accessories Shall Be Made Of Ss304 With Catwalk, With Tool Box, Hose Tray Top Stainless Hose Tray Cover, With Tool Box, Hose Box. Catwalk : 1.5mm Thick Gi Sheet Stamped Checkered Plate Sheets On Angular Bar Frames And Stringers. Vertical Access Ladders : 304mm Wide X 1’’ Dia Gi Pipe Ladders Installed At Front And Rear Of Tank Body Piping Arrangement With : Ank Body Interior To Be Partitioned Into 2 Compartments At 2 Dia. Discharge Pipe On 2,000 Liter Capacity Each. The Right Side : Total Tank Capacity Is 4000 Liters Compartment : Compartment Should Have 2.0’’ Dia. Drain Valve On The Right Side Compartment. : With One Ball Valve As Control Located At The Bottom Center Of The Tank Outside (bottom) : With Two (2) Supply Valve 1.0 Dia (left And Right Side) At The Rear Side Of The Tank Installed With Ball Valve Faucet. Manhole Cover : With Two (2) Pieces Manhole At One (1) Manhole Per Compartment Using Gi Sheet Cover And Breather With Manual Lock. Painting : Cab And Tank Body Painted Using Polyurethane Undercoating As Per Customer Color Specification. Accessories : Siren, Blinker, And Radio Base With Antenna. Pump And Engine Specifications: Brand New Water Pump : Pump With Engine Model 6hp Robin Subaru Rpx206 Or Equivalent With Engine, With Fittings Maximum Delivery Volume Of 600l/minute; Maximum And Accessories Output 3.7kw (5.0ps) 4000rpm To Be Mounted Between Cab And Tank Drivers Side. Pump Discharge Pipe Of 2’’ X 3’’ With Ventilated Cage. Hose : 10 Meters Brand New Non Collapsible Suction Hose (rubber), With Double Jacketed Fire Hose 2’’ Dia. X 15’’ Meters Length, With Nozzles. Additional : 1 Faucet At The Back (3” Diameter) With Motor Pump Housing Stainless With Side Grills Catwalk Stainless 1 Manhole // Advertisement/posting Of Invitation To Bid November 20-27, 2024 Pre-bid Conference November 27, 2024 2pm Issuance Of Bid Docs November 27 – December 09, 2024 Deadline Of Submission And Receipt Of Bids December 10, 2024 Time 2:00 Pm Bid Opening December 10, 2024 Time 2:01 Pm Bid Evaluation December 11, 2024 //

Details: Provn Of External Services At Certain Places At Af Stn Nagpur (ph-i)- Construction Of Block Of Pump House Complete All As Specified And As Shown In Drawings, M&l For Laying And Compacting 250 Mm Thick (compacted Thickness) Granular Sub Base Course (gsb) Grading As Per Grade Ii As Specified Table 400-1 Of Marth Specifications For Road And Bridge Works, 2013, In Two Layers Of Each 125mm Over Compacted Subgrade With Natural Sand, Crushed Gravel, Crushed Stone, Crushed Slag Or Combination Thereof As Per The Grading Required The Materials Are Mechanically Mixed, Spread And Leveling On The Subgrade By Using Motor Grader Of Adequate Capacity, And Rolling With Vibratory Roller Of Capacity 80-100 Kn Static Weight For Achieving Required Compaction Density Of Atleast 98% Of The Maximum Dry Density. Consolidating To Required Gradient And Camber Complete All As Specified And Directed With Finished Surface Tolerances As Per Table 900-1 Of Morth Specifications For Road And Bridge Works, 2013. Complete All As Specified & Directed.

Details: Moray Council Wishes To Establish A Framework Agreement With Suitably Qualified And Experienced Contractors To Assist With Delivery Of The Council’s Capital And Revenue Programmes, For Civil Engineering Related Work. This Agreement Will Replace The Current Civil Engineering Small Works Framework Ref 18/0326, Which Is Due To Expire In June 2024. The Anticipated Total Value Of This Framework Is In The Region Of 5,729,000 And Is Expected To Run For An Initial Period Of 2 Years, With Options To Extend For A Further Period Of 2x12 Months. This Notice Is To Make Potential Suppliers Aware Of This Future Contract Opportunity And Proposed Timescales. The New Framework Will Be Split Into The Following Lots: 1 - Surfacing And Roads 2 – Flood Risk Maintenance 3 – Vegetation Management 4 – Bridge And Structure Maintenance 5 – Vrs 6 – Fencing 7 – Topographic And Bathymetric Surveys 8 – Ecology Surveys 9 – Pump Station Maintenance 10 – Traffic Management 11 – Road Lining And Ancillaries Cpv: 45200000, 45220000, 45200000, 45200000, 45200000, 45200000, 45200000, 45200000, 45200000, 45200000, 45200000, 45200000.

Details: Description 1.00 Pc Water Separator 1.00 Pc Belt Tensioner 1.00 Pc V-belt 1.00 Pc Fuel Filter 1.00 Pc Oil Filter 1.00 Pc Filter Cartridge 1.00 Pc Hydraulic Pilot Filter Element 1.00 Pc Filter, Hydraulic Return 1.00 Pc Air Filter Secondary 1.00 Pc Primming Pump, Water Separator 1.00 Pc Ac Main Filter 1.00 Pc A/c Ambient Filter 1.00 Pc Hydraulic Tank Breather Filter 1.00 Pc Fuel Tank Breather Filter 1.00 Pc Air Filter Primary 28.00 Ltrs Ultra Diesel Engine Oil 15w/40 32.00 Ltrs Super Transmission Oil 80w/90 4.00 Ltrs Super Transmission Oil 85w/140 180.00 Ltrs Super Hydraulic Oil

Details: Description 1 Spark Plug 3 Pcs 2 Oil Filter 2 Pcs 3 Bolt, 12x55mm 1 Pcs 4 Brake Pad 1 Set 5 Suspension Arm 4 Pcs 6 Ball Joint, 54530-2k000 4 Pcs 7 Wheel Nut 1 Pc 8 Magwheel Nut 2 Pcs 9 Ball Joint, Sb-3881 (upper) 4 Pcs 10 Ball Joint, Sb-3883 (lower) 4 Pcs 11 Fuel Filter 1 Pc 12 Brake Pad (bendix) 1 Set 13 Fuel Filter Assy., 4jh1, 8-97287518-0 1 Set 14 Tail Light Assy. 2 Sets 15 Bolt, Carbon Steel 1 Pc 16 Fuel Filter, Uc 515 2 Pcs 17 Fuel Pump Hkt Assy. 2 Sets 18 Shock Absorber, 3442 (kyb) 2 Pcs

Details: Title: Procurement Of Electricity For Øyvar As 2025 - 2028 + Option For 2 Years Extension. description: Øygarden Municipality (previously Fjell Municipality) Separated Services In 2003 For Planning, Development, Operation Of Water And Sewage Installations In The Municipality, As Well As The Sanitation Services Of A Separate Company, Øyvar As (formerly Fjellvar As). Øygarden Municipality Owns 100% Of The Shares And Has Provided Surety For All Of The Loan Raising That The Company Requires For Investment. The Company's Services Lie Under The Self-cost Regime, And All Costs The Company Has Are Covered Through Fees To Subscribers. The Company Has An Annual Turnover Of Nok 270 Million (2023) And Has A Electricity Consumption Of About 5.7 Gwh/year. The Company Has Both Large Water Treatment Plants And Sewage Treatment Plants That Require A Lot Of Electricity As Well As A Number Of Smaller Installations Such As Pumping Stations And Other Infrastructure That Requires Electricity. Øyvar Shall Enter Into A Framework Agreement With One Tenderer For The Purchase Of Electricity. Volume: Approx. 5.7 Gwh Number Of Plants: 190 Installations Distributed Over The Entire Municipality.

Details: The Regional District Of Okanagan-similkameen (rdos) And Regional Partners Including City Of Penticton, District Of Summerland, Penticton Indian Band, Town Of Oliver, Town Of Osoyoos, Town Of Princeton, And Village Of Keremeos Requests Applications From Suppliers And Contractors Who Are Interested And Capable To Perform Work During Emergencies. The Regional Partners Are Seeking The Following:  Eoc Staff (contractors Able To Work In The Eoc: Reception, Information, Operations, Logistics, Management Team, And Incident Command)  Catering  Sand Supply And Delivery  Security Providers  Trucking Services (including Crane Or Forklifts) – Consider Working On Uneven Ground  De-watering Services  Pump Providers  Professional Services O Hydrologist O Hydrogeologist O Geoscientist O Archeologist O Engineer O It Services O Gis For Eoc Staff Persons, Rates Must Fall Within The Industry Standard:  Eoc Director/deputy-director: $72.50- $101.00/hour  Eoc Management Team (section Chief/liaison): $59.50-$80.00/hour  Eoc Section Staff: $30.00- $65.00/hour

Description: CATEGORY: AAMI level 4 EN 13795 low linting Disposable breathable high performance raglan sleeves surgical gown with two towels , ECG Roll 210mmX 20mtr , Peracetic Acid bott of 810 gm , Pad abdominal sponges with radioopaque thread stiched with bleached gauze non fraying edges EP 17 size 25 X 25 CM piles of Eight , Individually vacuum packed Sterile triple nitrile coating latex powder free puncture resistance gloves with triple coating technology Size 6 point 5 , Individually vacuum packed Sterile triple nitrile coating latex powder free puncture resistance gloves with triple coating technology Size 7 point 0 , Individually vacuum packed Sterile triple nitrile coating latex powder free puncture resistance gloves with triple coating technology Size 7 point5 , Individually vacuum packed Sterile triple nitrile coating latex powder free puncture resistance gloves with triple coating technology Size 8 point 0 , Certofix Protect Chemically Bonded with Biguanide Central Venous Catheter Triple Lumen , Ambulatory Multirate Elastomeric Infusor Pump with maximum fill Volume of 300ml with flow rates of 2 3 and 5ml hr , Chemical Indicator Strip HMCS for HMTS 80 Machine 250 pack , Biological Indicator HMBI24 24h for HMTS 80 Machine pack of 30 , Autoclave wrapping paper for SMS with 100 percent Polypropylene of approx weight 125gm m2 size 120x120cm , Descaler Rust Remover De Stainer and Passivier and Neutralizing Detergent 4x4 Ltr Case , Medical Instrument Lubricant Non Silicon Based for Metal Instruments 4x1 Gal Case , Autoclavable Silicon Gloves , Disinfection tray Polypropylene 426x156x138 4 Litres , Combined Preventive maintenance Kit HMPM For HMTS 80 Machine , 3 Line Labeller Machine for Documentation Sticker , Self Seal Tyvek Film Pouches with auto closure mechanism with EO and Steam Chemical Indicators 400 mm X 530 mm Medical grade , Self Seal Tyvek Film Pouches with auto closure mechanism with EO and H2O2 Chemical Indicators 400 mm X 500 mm Medical grade , Sticker with Steam Chemical Indicator for Documentation 30 ROLLS BOX , Biological Indicator Rapid Readout H2O2containing a standardized viable population of Bacillus Stearothermophilus spores detects viable spores