Pumps Tenders

Details: Advertisement For Bids Sealed Bids Will Be Received For The City Of Alexandria, Louisiana, By The City Clerk, At The City Council Chambers, City Hall, 915 Third Street, Alexandria, Louisiana, 71301, Until 10:00 A.m. On Tuesday, The 7th Day Of January, 2025, And Then At Said Office Publically Opened And Read Aloud. Any Person Requiring Special Accommodation Shall Notify The City Clerk Of The Type(s) Of Accommodations Required Not Less Than Seven (7) Days Before The Bid Opening. For: Augusta Avenue Drainage Improvements Spn: H.015190 Cpn: 252203/252301 Complete Bidding Documents May Be Obtained From: Ballard-clc, Inc 1009 Bayou Place Alexandria, La 71303 318-445-6571 (p) A Compact Disk (cd) With A Complete Set Of Bid Documents Will Be Given To Licensed Contractors. Pursuant To La R.s. 38:2212 A.(1)(f) And R.s. 38:2212 A.(1)(f)(vii), Vendors/contractors Have The Option To Submit Bids And Bonds Electronically. Bids And Bonds To Be Filed Electronically Shall Be Posted With Central Bidding At Www.centralauctionhouse.com (1-225-810-4814). Registration Will Need To Be Completed Prior To Posting Of Bid. Plans, Specifications And Bid Documents Shall Be Obtained From The Consultant Listed Above And Posted With Central Bidding. All Bids Must Be Accompanied By A Bid Security Equal To Five Percent (5%) Of The Sum Of The Base Bid, And Must Be In The Form Of A Certified Check, Cashier’s Check Of Bid Bond Written By A Surety Or Insurance Company Complying With R.s. 38.2218 C. The Bid Bond Shall Be In The Favor Of The Owner, And Shall Be Accompanied By Appropriate Power Of Attorney. The Successful Bidder Shall Be Required To Furnish A Performance Bond And Payment Bond, In An Amount Equal To 100% Of The Contract Amount, Written By A Surety Or Insurance Company Meeting The Requirements Noted In R.s. 38.2219 A.(1)(a), (b) And (c). Bids Shall Be Accepted From Contractors Who Are Licensed Under R.s. 37.2150-2163 For The Classification Of Highway, Street And Bridge Construction. Project Work Shall Consist Of The Following Major Items – Drainage Structures (reinforced Concrete Box, Reinforced Concrete Pipe And Catch Basins), Storm Water Pump Station, And Roadway Patching. The Contract Duration Shall Be Three Hundred Forty Days (240) Working Days. The Engineer’s Estimated Cost Of Construction Is $2,489,124.17. In Accordance With 38.2212.(a)(1)(b)(ii)(bb) And 38.2227, The Apparent Low Bidder Will Submit The Contractor’s Affidavit (aff-1), Contractor’s Attestion (ac 1-2) And Attestation Clause Regarding Verification Of Employees (av-1) Within Ten (10) Days Of The Bid Opening Or They Will Be Declared Non-responsive. No Bid May Be Withdrawn For A Period Of Forty-five (45) Days After Receipt Of Bids, Except Under The Provisions Of R.s. 38.2214. The Owner Reserves The Right To Reject Any And All Bids For Just Cause. In Accordance With R.s. 38.2212.(a)(1)(b), The Provisions And Requirements Of This Section, And Those Stated In The Advertisement Bids, And Those Required On The Bid Form Shall Not Be Considered As Informalities And Shall Not Be Waived. Donna Jones City Clerk November 12, 2024 Please Publish November 15, 22, December 6, 2024

Details: Description Republic Of The Philippines Province Of Nueva Ecija City Of Gapan Km.92, Maharlika Highway, Bayanihan, Gapan City - - - - O0o - - - - Bids And Awards Committee Request For Quotation The City Government Of Gapan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Distributors / Contractors To Submit Proposal / Qoutation For The Hereunder Project: Name Of Contract : Various Spare Parts For Repairing Of 10 Units Of Harvester Contract Location : Gapan City Hall, Km.92, Bayanihan, Gapan City Abc : P 589,600.00 (five Hundred Eighty Nine Thousand Six Hundred Pesos Only) Brief Description : Various Spare Parts For Repairing Of 10 Units Of Harvester For The Used Of City Government Of Gapan(office Of The City Gso) Contract Duration : 7 Days Source Of Fund : Item No. Qty. Unit Description Unit Cost Amount 1 10 Pcs Assy Pump Hyd. 18,010.00 180,100.00 - 2 10 Pcs Assy Soleniod 3,520.00 35,200.00 3 10 Pcs Seal Oil 355.00 3,550.00 4 10 Pcs Disc Break 2,520.00 25,200.00 5 10 Pcs Bearing 63/320 605.00 6,050.00 6 8 Pc Assy Starter 5,520.00 44,160.00 7 10 Pcs Tropeller 8,020.00 80,200.00 8 10 Pcs Plate 2,520.00 25,200.00 9 10 Pcs T-kit Seal 5,030.00 50,300.00 10 10 Pcs T-pin (lift Arm) 310.00 3,100.00 11 20 Pcs Bearing 6309 920.00 18,400.00 12 10 Pcs Assy Chain 5,550.00 55,500.00 13 10 Pcs Cross Kit 1,250.00 12,500.00 14 2 Pc Steering Jack 4,540.00 9,080.00 15 3 Pc Gear Box 2,550.00 7,650.00 16 2 Pcs Clutch Lining 12,520.00 25,040.00 17 2 Pc Steering Hose 2,550.00 5,100.00 18 1 Pc Control Valve Setting 7,550.00 7,550.00 19 10 Pcs Bearing 610.00 6,100.00 *****nothing Follows***** Total 599,980.00 All Particulars Relative To Eligibility Statement And Screening, Performance Security, Evaluation Of Proposal And Award Of Contract Shall Be Governed By The Pertinent Provisions Of The Revised R.a. 9184 And Its Implementing Rules And Regulations (irr) The City Government Of Gapan Reserves The Right To Accept Or Reject Any Proposal / Qoutation, Reject All Proposal / Qoutations At Any Time Prior To Contract Award And Assumes No Responsibility Whatsoever To Compensate Of Indemnify Suppliers / Contractors For Any Expense Incurred In The Preparation Of Such Proposal / Qoutations. For Further Information, Please Contact: Mr. Roman P. Baguisa Iii Bac Secretariat Mobile No.: 0916-869-7930 Jose Edwin L. Castillo Bac Chairman

Details: Description 1 Lot Hairdressing Nc Ii Laboratory Tools & Equipment For Student Use: 20 Units Hair Dryer - Power: 1000w Rated Voltage: 220 Vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm W/ Plastic Handle Design Packed W/carton Box W/ Styro Foam Holder W/ User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Branded 13 Unit Crimper - Power: 25 Watts(minimum) Size: At Least 38cmx15.5cmx9cm Max. Temperature: 200 Degrees Centigrade W/ Variable Heat Setting W/ On/off Switch Button Rated Voltage: 110 – 230volts Ac W/power Cord W/ Plastic Handle 10 Unit Curling Iron - Ceramic Curling Iron Capacity: 65wat Voltage: 210-240volts Ac W/ Power Cord Barrel Size: 1” (min.) Adjustable Heat Setting W/ Maximum Temp. Of 200 Degrees Centigrade Swivel Cord Up To 360 Degree Cylindrical Shape Plastic Handle For Safety Purpose Packed W/ Protective Carton Box, Branded 5 Unit Hydraulic Chair - Material: Metal Base Size: L-59cm W-54cm H- From 51-78cm Hydraulic Pump Can Be Up & Down By Pedalling Load Cap.: 180kg. Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable & 360' Rotation Hydraulic Pump Build In For Adjusting The Seating Height. W/ Foot Rest Lockable Hydraulic Pump For Safety Feature W/ User Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed W/ Transport Protective Carton Box 10 Unit High Chair - Bar Stool Material: Metal, Painted W/ Anti Rust Width Of The Chair :15” Min. Height :33” Min. Synthetic Leather Seat Material Bar Stool Crown Back Type W/ Rubber Ring Of Barstool For Anti-skidding 2 Set Shampoo Bowl Set - Bowl Material: Abs Plastic W/ Adjustable Stand (height: 39” To 54”) Min. Bowl Dimensions: 19 Inches(l) X 20”(w)x10”(h); W/sealed Foam Rubber Neck Rest For Shampoo Bowls W/ Hose Attachment Of 7 Ft. Long(min.) Stainless Steel Frame Portable Type Packed W/ Shipping Carton Box, Branded 10 Units Hair Iron - Material: Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (min.) Power Rating: 220-240 Volts Ac; Over-all Size: 24cm Long (min.) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit W/ Digital Temp. Control Safety Mode: Auto Shut Off After 60 Minutes; W/ Swivel Cord Comes With Storage Pouch, Branded 3 Unit Hair Steamer Power 450 Watts (minimum) Rating Is 220 Volts/50-60hz Hood Material: Polycarbonate Hood Has At Least 30cm Dia. Opening X 25cm Deep Timer Setting Is Up To 60 Min. W/at Least 32 Ounce Water Reservoir Adjustable Height From 100 To 150cm W/ At Least 5 Swivel Caster W/ User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Branded 30 Pc. Hand Mirror - Mirror Size 15 Cm Dia. (min.) Frame Thickness Including Mirror Glass: 6. 5mm (min.) Over-all Length W/ The Handle Is 20 Cm (min.) Clear Mirror W/ No Distortion Frame & Handle Are Made Of Plastic Plane Mirror Type Packed W/ Carton Box With Styrofoam Protection 10 Pc. Modular Mirror -mirror Type: Plain Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75cmx65cm (min.) Mirror Thickness: 6mm (min.) Smooth Surface, No Sharp Edges & Cracks Packed W/ Protective Carton Box 30 Doz. Razor - Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14cmx2cm (min. When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Non Corrosive, Branded 10 Unit Hair Clipper - Body Material: Hard Plastic Blade Material: Carbon Steel Capacity: 6 Watts (min.) Complete With Blade Guard & 4 Comb Attachments (#1, #2, #3, #4) Motor: Magnetic Type, Corded, 12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, W/ Complete Accessories Including The Cleaning Brush W/ Cord 2 Meters Length Min. W/ User's Manual In English Which Includes: A. Parts Manual W/ Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box, Branded 10 Unit Stool - Material: Metal, Electroplated Load Cap.:150kg Design: Swivel Stool W/backrest W/hydraulic Lift To Adjust Height Freely. W/ Thick Sponge Cushion. W/ At Least Four Caster Wheels. W/ Thick Sponge Cushion. Swivel Stool W/ Backrest No Sharp Edges, Branded 23 Pc. Applicator Brush - Material: Plastic Nontoxic Size: Small=190mm Length Medium= 270 Mm Large=300mm Handle Width: 70 Mm (min.) Width Of Tip: 80mm (min.) W/hair Coloring Dyeing Board Packed W/ Plastic Pouch 30 Pc. Roller Brush - Material: Plastic Bristle Paddle Brush Type Wooden Handle Min. Width: 2” Nontoxic Packed W/ Protective Carton Box 30 Pc. Paddle Brush - Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm (min.) W/ Wooden Handle" 30 Pc. Tinting Brush - Material: Plastic Bristle Paddle Brush Type Wooden Handle Min. Width: 2” Nontoxic Packed W/ Protective Carton Box 5 Dozen Curling Rods - Material: Hard Plastic Color : Any Color W/ Different Size: Small, Medium, Large And Jumbo Size 10 Dozen Jumbo Size 10 Dozen Medium Size 20 Dozen Large Size 10 Dozen Small Size 20 Dozen Extra Small 25 Pc. Hairbrush - Material: Plastic Bristle Paddle Brush Type Wooden Handle Min. Width: 2” Non Toxic Packed W/ Protective Carton Box 20 Pc. Frosting Cap W/ Hook - Cap Material: Silicone Type: Reusable, Perforated Cap One Size Fits All Or At Least 31cmx22cm W/ Pre-cut Tipping Guides W/ Bleed Proof Inner Liner W/ A Rounded Metal Hook To Pull Hair Through The Readymade Perforations Packed With Plastic Pouch 30 Pc. Shower Cap - Material: Plastic Reusable Capacity: 1/2 Cup (minimum) Rounded Edges W/ Handle Thickness: 1.5mm (min.) 20 Unit Heating Cap - Waterproof Cloth Material. Cordless Type To Fit An Average Size Head (21-24”) Stretch Up To 29” Unisex Hair Care Treatment Styling Reversible & Reusable, Nontoxic Includes With User's Guide In English That Contains: A. Diagram Of The Parts W/ Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment D. Basic Trouble Shooting & Maintenance Procedure Packed W/ Protective Carton Box 30 Pc. All Purpose Comb - Material: Plastic Size#3 Or At Least 18 Cm Long (min.) Has Both Fine & Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (min.)nontoxic Packed W/ Plastic Pouch 50 Pc. Tail Comb - Material: Plastic Size : 8” (l) Min. X 1” (w) Min. Tail Length: 4” (min.) Tooth Length: ¾” Min. Packed W/ Plastic Pouch 20 Pc. Appro Comb - Material: Plastic Size: Over All Length At Least 7” Width: M3.25” Min. Number Of Teeth: 12 Teeth (min.); Teeth Height: 2.5” Long (min.) Nontoxic Packed W/ Plastic Pouch 30 Pc. Haircutting Comb - Material: Hard Plastic Length Including The Handle:180mm (min.) Width: 30mm (min.) W/ Detachable Steel Blades & Blade Holder W/ Two Sides For Different Cuts W/ Extra Blades Packed W/ Protective Carton Box 39 Pc. Large Toothed Comb - Material: Hard Plastic Length Including The Handle:180mm (min.) Width: 30mm (min.) W/ Detachable Steel Blades & Blade Holder W/ Two Sides For Different Cuts W/ Extra Blades Packed W/ Protective Carton Box 30 Pc. Teasing Comb - Material: Plastic W/ 2 Rows Of Teeth 1st Row: Large Teeth W/at Least 25mm Long 2nd Row: Small Teeth W/ At Least 19mm Long Over-all Comb Size: 20 Cm (l) Min.x3.8cm (w) Mini. Nontoxic Packed W/ Plastic Pouch 30 Pc. Wide Toothed Comb - Material: Plastic Size: At Least 15cm Number Of Teeth: 10 Teeth (min.) Gap Between Comb's Teeth: 0.4 To 0.5cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length 30 Pc. Rubber Gloves -size: Medium Thickness: 4 Mil Acid Resistant Packed W/ Plastic Pouches In Pairs 10 Dozen Hair Clamps - Material: Plastic Overall Length: 9.5cm Thickness:10mm (min.) Hairstyling Clamp Type 5 Box Hair Pins (box) - Material: Metal Size: At Least 3.5 X 4.5 X 0.5” W/ Ball Tips Packaging: 100 Pcs/ Box Color: Black 10 Dozen Duck Bill Clamp - Material: Metal Length: 11cm (min.) High Elasticity Stainless Steel Spring. Non Slip Handle Packed W/ Plastic Pouch Branded 10 Dozen Pin Curl Clips - Material: Metal Length: 11cm (min.) High Elasticity Stainless Steel Spring. Non Slip Handle Packed W/plastic Pouch. Branded 10 Dozen Roller Pin - Material: Metal Size: 60m Long (min.) Application: Hair Roller Pins Quantity By Dozen (12 Pc.) Non Corrosive Packed W/plastic Pouch 10 Dozen Double Prong Clips - Material: Steel Nickel Or Chrome Base Plated Size: 45mm Min. Hairstyling Clip Type Packed W/ Plastic Handle 10 Dozen Single Prong Clips - Material: Steel, Plated Size: 55mm (min.) Type: Single-prong Clip Packed W/ Plastic Pouch 30 Pc. Headband - Size: 6 Inches (min.) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable & Breathable 30 Pc. Flannel Headband – Flannel Cloth Size : At Least 45 Cm (unstretched Circumference Width: 8cm (min.) 30 Pc. Invisible Hairnet - Material: Nylon Size: 55mm (min.) Stretchable & Unisex Type Color: Black Nontoxic Packed W/ Plastic Pouch 40 Pc. Smock Gown - Material: Polyester Sizes: 1 Pc. = Small Size, At Least (50”x56”); 1 Pc. = Medium Size, At Least (52”x 58”);1 Pc. = Large Size, At Least (54”x60”); Packed W/ Plastic Pouch Per Size 5 Dozen Jumbo Rollers - Material: Plastic Approx. 44mm In Dia.x64mm Long 5 Dozen Medium Size Rollers - Material: Plastic; Dia.: 38 Mm (min.) Length: 58mm (min.) Hairstyling Type Packed W/plastic Pouch 15 Pc. Drip Pan - Material: Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8”(min.) Shallow Rectangular Type Packed W/carton Box 30 Pc. Mixing Bowl - Material: Plastic Inner Diameter: 10.5 Cm (min.) Height: 6cm (min.) Thickness Is 2mm (min.) Any Color Nontoxic 5 Set Measuring Cup - Material: Hard Plastic Size: 8cm X 10.5c, Height 10 Pc. Scoop - Material: Plastic Capacity:1/2 Cup (min.) Rounded Edges W/ Handle Thickness: 1.5mm (min.) 20 Pc. Spatula - Material: Plastic Dimension: Over-all Length Of 7.5cm Long, X 1.5cm Wide (min.) Application: Hair Waxing Removal Packed W/ Plastic Pouch 20 Pc. Spray Gun - Material: Transparent Plastic Capacity: 300ml (min.) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7cm & The Height Is 17cm

Description: Eips Is Looking To Reduce Toxins And Hazardous Materials In Cleaning And Disinfecting Supplies To Reduce Air And Water Pollution And To Protect Human Health And Safety In Learning And Workplace Environments. To Assist With Leed Requirements, Taking Into Consideration Performance And Cost, Eips Is Looking To Purchase Products Which Have The Least Adverse Impact On Health And The Environment. As Such, Eips Is Looking To Purchase Safe Products That Are: - Produced From Re-cycled Materials, Have Minimal Adverse Effect On Human Health, Conserve Natural Resources And Reduce Waste; - Third Party Certified Products That Are Certified Through Ul Ecologo, And Or Green Seal Will Be Given Consideration; And - Products Which Are Greenguard Gold Certified Are Preferred. Cleaning/disinfecting Products: - Preference Is For Hydrogen Peroxide Based Chemical Products; - Preference Is For An All-in-one Cleaner/disinfectant; - Disinfectants Must Be Approved By Health Canada, Have A Drug Identification Number (din) And A Broad-spectrum Virucidal Claim Or A Virucidal Claim Against Non-enveloped Viruses Or Coronaviruses; - Should Have A Kill Time Of Five Minutes Or Less Against Strains Of Sars-cov-2(covid-19); - Must Be Dilutable (concentrate Format) – No Ready To Use Products (rtu); - Must Have No Or Low Voc Claim; - Should Have Virucide, Bactericide, Fungicide And Mildewcide Properties; - Should Meet Bloodborne Pathogen Standards For Decontaminating Blood And Bodily Fluids; - Organic Ingredients In The Product Should Be Readily Biodegradable In Accordance With Oecd301 Standard; - Preference For Products That Are Ahp(r) – Actively Will Break Down Into Water And Oxygen After Use - Preference For Fragrance-free Products; - Should Have A Low Or No Voc Claim; - Preference For Products That Contains No Phosphorous Or Nonylphenol Ethoxylate (npe) Detergents; - Should Be Able To Be Diluted With Cold Water; And - Preference For Products That Do Not Require Ppe When In Diluted Form. Bathroom Cleaners: - Preference For Products That Can Effectively Clean Toilet Bowls, Urinals, And Porcelain Sinks; - Must Be Mild All-purpose Cleaners Which Will Not Damage Porcelain, Metal, Countertops And Tiles; - Should Be Effective To Clean And De-scale To Remove Hard Water Deposits, Soap Scum And Urine Salts - Should Be Fragrance Free; - Must Have No Or Low Voc Claim; - Must Be Phosphate Free; - Must Not Cause Harm To Plumbing Systems; And - Organic Ingredients In The Product Should Be Readily Biodegradable In Accordance With Oecd301 Standard. Heavy Duty Degreaser: - Should Be Able To Effectively Remove Grease, Grime, Oily Residue And Other Difficult To Remove Materials; - Must Be Safe To Use On Floors, Walls, Ceramic, Plastic, Metal And Concrete; - Must Have A No Or Low Voc Claim; And - Should Be Fragrance-free. Graffiti Remover: - Should Be Preferably Formulated With Ingredients That Are Biodegradable; - Should Have A Low Voc Claim; - Should Be Able To Efficiently Remove Spray Paint, Ink, Permanent Markers And Other Hard To Remove Substances From Interior And Exterior Surfaces; And - Should Not Cause Damage To School Contents Such As Desks, Counter Tops, Metal Lockers, Ceramic Walls, Painted Drywalls, Cement, Brick, Walls, And Metal Lockers. Floor Wax: - Should Be An Environmentally Formulated Sealer Finish Which Produces A Noticeable Gloss; - Should Dry To A Smooth, Hard, Clear And Colorless Coating Within 30-40 Minutes; - Should Be Easy To Re-coat And Should Be Quick To Remove Coats; - Should Be Safe For Most Resilient Hard Surface Flooring Including Vinyl Composition, Linoleum, Terrazzo, And Quarry Tile; - Should Be Durable For Heavy Foot Traffic; And - Should Not Contain Materials Harmful For The Wastewater Treatment Systems Such As Heavy Metals Or Zinc. Floor Stripper: - Should Quickly And Effectively Remove Wax; - Should Have A Low Voc Claim; - Should Not Contain Any Butyl, Phosphate Or Ammonia; And - Must Not Cause Damage To Vinyl Composition, Linoleum, Terrazzo, And Quarry Tile. Carpet Cleaner: - Should Be Conducive For Carpet Extraction, Bonnet Cleaning, And Carpet Spot Stain Remover; - Should Be Able To Removal Soils Without Causing Harm To The Carpet; - Should Be Able To Effectively Removal Salts And Ice-melt Staining From Entrance Matting; - Should Be Fragrance Free; And - Should Be Able To Be Used With Cold Water. Odor Eliminator/cleaner: - Should Be Highly Concentrated, And Contain Microbial Enzyme Producing Bacteria And Odor Counteractants; - Should Be Effective To Treat Grout, Urinals, Drains, Showers And Surface Areas Of Locker Rooms; - Should Be Able To Treat Fats, Grease And Deposits In Grout And Floors Commercial Kitchens; And - Should Be Effective For Use On Carpets. Hand Soap: Eips Is Interested In Hand Soap That Is Gentle, Dermatologist Tested, Hypoallergenic, Fragrance And Dye Free, Ph-balanced And Triclosan-free. The Re-fill Cartridges Should Be 100% Recyclable, Allow For At Least 99% Of The Product To Be Used Up And Be Designed For Heavy Use. The Refill Cartridges Should Be Designed To Be Sealed So-as-to Reduce The Risk Of Cross Contamination And Should Be Designed To Not Allow For Dripping To Ensure That Counters Remain Clean. Hand Sanitizer And Dispensers: - Must Be Soapopular Brand, Alternatives Will Not Be Considered; And - Must Be Non-alcohol Foaming. Paper Products – Toilet Paper And Paper Towel: - Should Be At Minimum, Green Seal Standard Gs-1 Certified; - Should Be Coreless Paper Towel And Toilet Paper; - Should Be Ul Ecologo Certified; And - Should Contain At Least 25% Post-consumer Recycled Material. Garbage Bags: - Preference: 100% Degradable, Made Of 100% Re-cycled Plastic, 100% Recyclable Product; - Compostable Bags Must Be Tested According To The Requirements Of Astm 6954-04; And - Product Does Not Create Or Release Methane Gas. Ice Melt: - Preference Is For A Product That Is Not Harmful To Vegetation – Will Not Damage Grass, Trees And Shrubs - Is Safe For Children And Pets; - Should Be Comprised Of An Anti-corrosion Formula To Reduce Damage To Vehicles, Equipment And Other Metals; - Should Be Comprised Of Formulations Which Will Minimize Damage To Wood And Concrete; - Should Be Non-tracking To Help Protect Carpets And Flooring; - Should Be Easy To Use – No Ppe Required For Application; And - Should Be Fast Acting. Packaging: - Should Be Designed To Reduce Waste; And - Should Be 100% Recyclable. Dispensers: - All Paper Towel And Soap Dispensers Are To Be Provided (in Bulk Quantities) At No Cost To Eips For The Initial Install And Throughout The Duration Of The Contract When Required; - All Dispensers Should Be Constructed Of Strong Durable Material Which Are Designed For Heavy Usage; - Should Have A Low Maintenance Design To Ensure Easy To Maintain, Clean, And Have A Window To Check Quantity Capacity; - Toilet Paper Dispensers Should Be Stainless Steel, Double Capacity Featuring An Automatic Drop Down To Ensure Continuous Supply, And Be Able To Support Coreless Toilet Paper Rolls; - Should Be High Capacity To Minimize Refill Frequency; - Should Be Easy To Refill To Maximize Efficiency; - Soap And Paper Towel Dispensers Must Be Manual; - Dispensers Which Are Hard Wired Or Require Batteries Will Not Be Considered; - Paper Towel Dispensers Must Have A Manual Feed Wheel Which Does Not Allow For The Paper To Go Back Up Into The Unit; - Paper Towel Dispensers Should Have A Front Pump Bar Or Wheel To Effectively Pull-down Paper. Slide Turn Wheels Which Have A Low Profile Are Not Preferred; - Soap Dispensers Should Allow For Portion Control Settings; Chemical Dispensing Systems For The Cleaning Supplies Should Allow For Multiple Chemicals To Be Housed In Lockable Cabinet; 1. The Cabinet Unit Should Be Equipped With A Selector Valve To Easily Change From Each Different Product. The Unit Should Have The Capability To Dispense Product Into Buckets Or Spray Bottles At The Correct Dilution Ratio; 2. The Chemical Dispensing Hose Should Be At A Minimum Of 8 Feet In Length And Should Have A Pull Trigger Handle To Start And Stop At The Desired Fill Level; 3. The Chemical Dispensing Unit Should Be Water Valve Operated, Filling Both Buckets And Water Bottles From The Same Chemical Port; 4. The Chemical Dispensing Unit Should Be Equipped With Back Flow Preventers Inside The Unit That Comply With Csa B64.10; 5. Maintenance Free Chemical Dispensing Systems Are Required For Commercial Kitchen Areas For 2-3 Compartment Size Sinks; 6. The Dispensing System Must Automatically Dispense The Correct Amount Of Chemical Based On The Water Flow; - Components And Parts Must Be Readily Available; And - Contractor Is Required To Perform All Necessary Repairs In A Timely Manner Without Incurring Any Costs To Eips. Glass Cleaner: - Should Be Non-ammoniated, Non-streaking And Quick Drying; And - Should Be Safe To Use On Stainless Steel, Chrome, And Washable Surfaces.

Details: Description I General Requirements I.1 Contactors Temporary Facilities And Field Office Months 8 I.2 Material Testing Lot 1 I.3 Safety Signages And Barricades Lot 1 I.4 Construction Safety And Health Lot 1 I.5 Project Billboard Unit 2 I.6 Permits And Clearances I.6.1 Occupancy Permit Lot 1 I.6.2 Ecc Permit Lot 1 Ii Concrete Works Ii.1 Cast In Place Concrete, Fc'=23.13 Mpa (3500psi) Second Floor Ii.1.1 Lintel Beam Cu.m 4 Ii.1.2 Stiffiner Column Cu.m 2 Ii.2 Cast In Place Concrete, Fc'=27.4 Mpa (4000psi) Second Floor Ii.2.1 Column Cu.m 10 Ii.2.2 Roof Beam Cu.m 26 Ii.2.3 Stairs (stair 1 And 2) Cu.m 14 Iii Reinforcing Steel Bars (inclusive Of Tie Wire Ga.#16) Iii.1 Reinforcing Steel (grade 40 ,fy=276 Mpa Inclusive Of Tie Wire Ga. #16) Kgs 11,927.54 Iii.2 Reinforcing Steel (grade 60 ,fy=414 Mpa Inclusive Of Tie Wire Ga. #16) Kgs 13,173.54 Iv Formworks And Scaffoldings Second Floor Iv.1 Column Sq.m 144 Iv.2 Roof Beam Sq.m 284 Iv.3 Lintel Beam Sq.m 32 Iv.4 Stiffiner Column Sq.m 33 Iv.5 Stairs (stair 1 And 2) Sq.m 100 V. Masonry Works V.1 Second Floor V.1.1 Exterior Wall (6"chb 700 Psi Including 12mm Thk Plastering) Sq.m 173 V.1.2 Interior Wall (4"chb 700 Psi Including 12mm Thk Plastering) Sq.m 207 Vi Doors And Windows Second Floor Vi.1 Doors And Accessories Inclusive Of Painting Vi.1.1 D2 - 900mm Flush Door (single-acting Door) W/ View Window Set 4 Vi.1.2 D4 - 800mm Flush Door (single Acting Door) Set 4 Vi.1.3 D7 - 700mm Pvc Door (single Acting Door) Set 4 Vi.2 Windows With Accessories Vi.2.1 W1 - 4panels - Jalousie Window On Aluminum Frame Set 2 Vi.2.2 W2 - 2panels-jalousie Window On Aluminum Frame Set 4 Vi.2.3 W4 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Incl. Framing Set 2 Vi.2.4 W5 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Incl. Framing Set 1 Vi.2.5 W7 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Incl. Framing Set 4 Vi.2.6 W10 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Inc. Framing Set 3 Vii Finishes Vii.1 Floor Finishes Vii.1.1 Ground Floor Vii.1.1.1 300mm X 300mm Wall Tiles (comfort Room) Sq.m 62 Vii.1.2 Second Floor Vii.1.2.1 Ff01 - Smooth Concrete Cement Finish Including 100mm Concrete Topping Sq.m 186 Vii.1.2.2 Ff02 - 300mm X 300mm Non-slip Porcelain Tiles Sq.m 19 Vii.1.2.3 Ff03 - 600mm X 600mm Non-slip Porcelain Tiles Sq.m 126 Vii.1.2.4 300mm X 300mm Wall Tiles (comfort Room) Sq.m 55 Vi.2 Painting Works Vi.2.1 Ground Floor Vi.2.1.1 Interior Wall Top-coat Paint Finish Sq.m 250 Vi.2.1.2 Exterior Walls Including Corridor Ceiling Sq.m 509 Vi.2.1.3 Fiber Cement Board Ceiling Sq.m 237 Vi.2.2 Second Floor Vi.2.2.1 Exterior And Interior Walls Including Skim Coat Sq.m 810 Vi.2.2.2 Fiber Cement Board Ceiling (rooms And Hallway) Sq.m 286 Viii Carpentry Works Viii.1 Ceiling Works Viii.1.1 Ground Floor Viii.1.1.1 Cf01 - 3.5mm Thk Fiber Cement Board On Light Metal Framing Sq.m 186 Viii.1.2 Second Floor Viii.1.2.1 Cf01 - 3.5mm Thk Fiber Cement Board On Light Metal Framing Sq.m 234 Viii.1.2.2 Cf02 - Acoustic Board 2x4x5/8, Fine Fissured On Tee Runner Framing Sq.m 52 Viii.1.2.3 0.4mm Thk Pre-painted Metal Spandrel With Air Vent On Metal Framing Sq.m 149 Viii.2 Partition Works Viii.2.1 Foldable Partition Fabric Acoustic Sq.m 17 Ix Steel Works Ix.1 Roof Framing And Steel Trusses Ix.1.1 Steel Trusses Ix.1.1.1 2"x2"x1/4" Angle Bar Ln.m 481 Ix.1.1.2 1-1/2" X 1-1/2" X 3/16" Angle Bar Ln.m 582 Ix.1.2 C-purlins Ix.1.2.1 140mm X 41mm X 2.0mm C-purlins Ln.m 1076 Ix.1.3 Sag Rod Ix.1.3.1 12mm Dia. Plain Round Bars Ln.m 113 Ix.2 Pre-painted Roofing Including Bended Accessories Ix.2.1 0.50mm Long Span Pre-painted Ribbed Type, Red Color Gi Sheet Ln.m 536 Ix.2.2 0.50mm Bended Spanish Gutter (red) Ln.m 40 Ix.2.3 0.50mm Bended Gutter Flashing (red) Ln.m 40 Ix.2.4 0.50mm Bended End Flashing (red) Ln.m 108 Ix.2.5 0.50mm Metal Fascia Ln.m 108 Ix.2.6 1"x1"x4mm Fascia Frame Ln.m 108 Ix.2.7 Insulation Foam 10mm, Double Sided Sq.m 483 Ix.3 Stairs, Ramp And Second Floor Corridor Metal Railings Ix.3.1 Stainless Steel (304) Round Tube 50mm X 6mm X 1.5mm, Handrail Ln.m 242 Ix.3.2 Stainless Steel (304) Round Tube 50mm X 6mm X 1.5mm, Balusters Ln.m 83 Ix.3.3 Aluminum Stair Nosing 1 1/2 X 8ft. X 1.2mm Thick Ln.m 80 Ix.4 1-3/4" X 3" Aluminum Tubular Wood Finish Vertical Slots Ln.m 22 Ix.5 Green Wall Panel Unit 1 Ix.6 Glass Roof Canopy Unit 1 Ix.7 Stainless Steel Letters And Logo Unit 1 X Electrical Works X.1 Lighting Luminaries X.1.1 24w Led Lamp Panel Recessed Downlight, Round, Daylight, Glass Covered To Specialist Recommendation Set 22 X.1.2 15w Led Lamp Panel Recessed Downlight, Round, Daylight, Glass Covered To Specialist Recommendation Set 4 X.1.3 2x28w Led Fluorescent Lamp, Recessed 300x1200mm Daylight, Rectangular To Specialist Recommendation Set 18 X.1.4 Twin 7.5w Led Lamp, Self-contained For Non-maintained Emergency Lighting For 3 Hours Duration. Set 15 X.1.5 Exit Light Set 3 X.2 Wiring Devices X.2.1 Switch: Two Gang, 15a, 230v, Flush Mount Set 8 X.2.2 Switch: One Gang Three Way, 15a, 230v, Flush Mount Set 2 X.2.3 Convenience Outlet, Duplex, 16a, 230v W/ground, Wall Flush Mounted Set 22 X.2.4 Outlet, Single, 15a, 230v For Exhaust Fans, Ceiling Fans, Emergency Lightings, Exit Sign And Hand Dryers Set 7 X.2.5 Hand Dryer 240v, Single Phase, 1400watts Set 3 X.2.6 Junction Box: 100x100x60mm, Square, Galvanized, #16 W/cover Ea 100 X.2.7 Outlet Box: 50x100x60mm, Galvanized, #16 Ea 115 X.2.8 Pull Box: 200x250x100mm, Galvanized, #18 W/cover Ea 2 X.3 Wires And Cables X.3.1 2.0mm2 Tw Wire-green M 50 X.3.2 3.5mm2 Thw Cu-green M 500 X.3.3 3.5mm2 Thw Cu-white M 500 X.3.4 22mm2 Thhn-2 Wire (fr)-yellow M 15 X.3.5 22mm2 Thhn-2 Wire (fr)-blue M 15 X.3.6 22mm2 Thhn-2 Wire (fr)-red M 15 X.4 Conduits, Boxes & Fittings X.4.1 Conduit: 20mm Dia. X 300mm Pvc L 104 X.4.2 Elbow: 32mmdia.pvc, Elbow: 32mmdia. Emt, Adapter W/lock Nut: 20mmdia.pvc, Adapter W/lock Nut: 32mmdia.pvc, Angle Bars, Unistrut Channel, Lock Nuts And Bushing Nuts, Conduit Clamps, Expansion Bolts. Etc. L 1 Xi Plumbing Works Xi.1 Plumbing Fixtures And Accessories/fittings Xi.1.1 Two Piece Water Closet With Complete Accessories Units 4 Xi.1.2 Urinal With Complete Accessories Units 1 Xi.1.3 Wall Mounted Lavatory And Complete Accessories Units 3 Xi.1.4 6" Stainless Kitchen Sink With Complete Accessories (processing Room) Units 6 Xi.1.5 6" Stainless Floor Drain Units 4 Xi.2 Waterline Xi.2.1 Second Floor Xi.2.1.1 3/4" Ppr Pipe Pn20 Ln.m 20 Xi.2.1.2 1 - 1/4" Ppr Pipe Ln.m 19 Xi.2.1.3 Fittings And Accessories Lot 1 Xi.3 Sanitary & Waste Line Xi.3.1 Second Floor Xi.3.1.1 100mm Dia. Pvc Pipe, S-1000 Ln.m 18 Xi.3.1.2 75mm Dia. Pvc Pipe, S-1000 Ln.m 1 Xi.3.1.3 Fittings And Accessories Lot 1 Xi.3.2 Downspout Xi.3.2.1 100mm Dia. Pvc Pipe, S-1000 Ln.m 250 Xi.3.2.2 Fittings And Accessories Unit 1 Xi.4 Non Metallic Diaphragm Pressure Tank ( 450 Liters) Inclusive Of Tank Fittings And Accessories Set 1 Xi.5 1hp Booster Pump Unit 2 Xii Mechanical Works Xii.1 Fire Protection - Lpg Xii.1.1 Equipment And Devices Unit 1 Xii.1.2 Pipes And Fittings Xii.1.2.1 Gi Pipes Schedule 40 Astm Including Fittings Lot 1 Xii.1.2.2 Lpg Pipe Secondary Containment Lot 1 Xii.2 Fire Protection-automatic Fire Sprinkler System Xii.2.1 Automatic Fire Sprinkler System Unit 1 Xii.2.2 Bi Pipes - Schedule 40 Astm Including Valves And Fittings Lot 1 Xii.2.3 Brackets And Supports Lot 1 Xii.2.4 Valves - Ul/fm Approved Lot 1 Xii.2.5 Flow And Monitoring Switches Unit 1 Xii.2.6 Firehose Cabinet W/ Complete Accessories Unit 4 Xii.2.7 Fire Extinguisher Unit 10 Xii.2.8 Fire And Jockey Pumps Including Pump Accessories - Including All Necessary Materials And Accessories To Complete The System Set 1 Xii.3 Fire Reserve Tank (34 Cu.m) Including Waterproofing And Accessories Unit 1 Xii.4 Pumphouse Unit 1 Xiii Auxiliary Works Xiii.1 Fire Detection And Alarm System (fdas) Xiii.1.1 Fire Alarm Control Panel And Accessories Unit 1 Xiii.1.2 Wires, Cables And Metallic Conduits Lot 1 Xiii.1.3 Roughing-ins Lot 1 Xiii.1.4 Miscellaneous Lot 1 Xiii.1.5 Grounding And Bonding Lot 1

Details: Copper Bottle Lugs Size 16 Sq Mm , 16 Sq Mm Copper reducer Terminal Crimping Type , 25 Mm Sq Pin Type copper Lugs , Lugs Copper, 16mm Sq Pin Type , Copper lugs 25 Sqmm , Copper Lugs, Type-ring, Size35mmsq,hole Dia-12mm , Copper Ring Type Lug 35 Sq mm , Lug Ring Type 25sqmm , 35 Mm Sq Pin Type Copper lugs , Copper Lug Ring Type Size 95 Sq Mm , Copper lugs 120 Sq Mm Copper Tubular Heavy Duty Type terminal Skts Ring Type H By D , Copper Lugs 150 Sq mm , 95 Mm Sq 12 Mm Hole Dia Ring Type Copper Lugs , copper Lugs, Type-ring, Size-35mmsq, Hole Dia-10mm , lugs Long Pump Cu Lugs Size 70mm Heavy Duty tubular Terminal End, Sh 10 Point 2 Mm,crimpi Ng barrel28mm , 50 Mm Sq,10mm Hole Dia Ring Type Copper lugs , Lugs Heavy Duty Crimping Type Cu Lugs 50m2 hole Dia 16 Point 2 Tongue Type, Palm-32 Mm , Ring type Cu Lugs Size 70mm2 Copper Lug, Size 70 Sq Mm tongue Type, Sh16 Point 2mm, Crimpi Ng Barrel18mm , heavy Duty Ring Tongue Type Copper Lugs 50 Sq Mm stud Hole 12point7 M Copper Lug, Size 50 Sq Mm Palm24mm,crimping Barrel-16mm , 50 Sq. Mm Heavy Duty copper In-line Connector Confirming To Bs 1977 Or Is 1897 , Aluminium Straight Through Ferrule In-line Connector 185 sq Mm , Aluminium Straight Through Ferrule In-line connector 25 Sq Mm , Copper Lugs 300 Sq Mm , Copper lugs 240 Sq Mm , Aluminium Straight Through Ferrule In-line connector 150 Sq Mm , Copper Straight Through Ferrule Inline Connector 25.0 Sq.mm , Aluminium Straight Through ferrule In-line Connector 95 Sq Mm , Lugs Copper crimping Type 300sq Mm Heavy Duty Copper Lug Size 300 Sq Mm Single Hole Standard Barrel Tubular terminal End, Sh-16point2mm,crimping Barrel-54mm. , aluminium Lug 120 Sq Mm Bolt Dia M12 , Aluminium straight Through Ferrule In-line Connector 35 Sqbmm , Lugs cupper Crimping Type 150 Sqmm , Aluminium Straight through Ferrule In-line Connector 50 Sq Mm , Aluminium lugs 95 Mm Crimpring Type , Aluminium Lugs, Typetubular Heavy Duty, Size-300mm Sq.,hole Dia20mm , aluminium Straight Through Ferrule In-line Connector 120 Sq mm , Aluminium Lug, Heavy Duty, Tubular Type, 150 Sq. mm. , Aluminium Lugs, Type-tubular Heavy Duty, Size70mm Sq.,hole Dia12mm , Copper Straight Through Ferrule in-lineconnector 35 Sq Mm , Aluminium Lugs, Type-tubular heavy Duty, Size-240mm Sq.,hole Dia16mm , Alumin

Details: Description Republic Of The Philippines Casd Government Of Ormoc City P.r. No.: 242779 Bids And Awards Committee Quotation No.: 245461-3021 Ormoc City Philgeps No.: Standard Form Title: Request For Quotation Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By You Or Your Authorized Representative Not Later Than _______ _______________________. (sgd) Katheryn A. Solaña Procurement Officer Note: (1) All Entries Must Be Typewritten Or Legibly Written. Of Acceptance By The End-user. (4) Price Validity Shall Be For A Period Of (2) Delivery Period Within 20 C.d. Upon Receipt Of The Sixty (60) Days. (5) G-eps Reg No., Mayors Permit, Dti/sec, And For Abc's Above Approved Funded Purchase Order (p.o.). Administrative 500k - Itr & Omnibus Sworn Statement Shall Be Attached Upon Submission Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall (6) Bidders Shall Submit Original Brochures Showing Certifications Of Be For A Minimum For Non-delivery Without Valid Reason. The Products If Applicable. (7) The Approved Budget Ceiling For This (3) Warranty Shall Be For A Period Of Three (3) Months Of Procurement Is (amount Indicated Below) Supplies & Materials, One (1) Year For Equipment, From Date Php 100,000.00 Activities Schedule From To 1 Issuance Of Canvass Thursday November 21, 2024 Tuesday November 26, 2024 2 Submission Of Canvass Wednesday November 27, 2024 10:00 Am 3 Opening Of Canvass Wednesday November 27, 2024 2:00 Pm # Item And Description Qty Unit Cost Total 1 Marine Engine (lot) 2 Lot Specifications: Marine Engine: 16 Hp, Low Speed Features: For Marine Use, High Torque And Power, Fuel Efficiency Easy To Assemble And Easy To Start Type 4 Stroke, Ohv, Single Cylinder, Inclined 25" Displacement 389 Cm3 (23.7 Cu In),bore X Stroke 88x64mm(3.5x2.5in) Maximum Net Torque 26.9 N-m(2.74 Kgf-m)2.74kgf-m,19.8lbf-ft @ 3000 Rpm, Compression Ratio 8.2:1 Fuel Consumption (at Continuous Rated Power) *1 4.7 Liters (1.24 Us Gal, 1.03 (mp Gal)/h Ignition System Transistorized Magneto Lubrication System Forced Splash Oil Capacity 1.1 Liter (1.16 Us Qt,0.97 Lmp Qt) Starting System Recoil Starter Air Cleanergrid Type Governor Mechanical Centrifugal Fuel Used Gasoline With Pump Octane Rating Of 86 Or Higher Fuel Tank Capacity 6.1 Liters (1.61 Us Gal, 1.34 Lmp Gal) With Warranty -x-x-x-x-x-x-x- Nothing Follows -x-x-x-x-x-x-x- Grand Total >>> * Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your Conditions, I/we Quote You On The Item At Prices Noted Above And Hereby Commit To Deliver The Same If Adjudged To Have The Lowest And Responsive Quotation. Business Name 2024-11-242779 Printed Name/signature/date

Details: Description Request For Quotation Rfq No.: 13748 Pr No.: 2024-1398 Rfq Date: 11/19/2024 Pr Date: 09/26/2024 Bac Routing Date: 11/11/2024 Company Name : Address : Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Starting The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than Two (2) Days Upon Receipt Thereof, In Return Envelope As Attached Herewith. Canvassed By: Checked By: Dwight Donald B. Javerle Josie C. Lim, Jd Canvasser Head, Procurement Terms And Conditions: ● Drop Your Quotations At The Bac Secretariat Office Or Thru This Email Crhprocurement2020@gmail.com Within 7 Days From Receipt Of Rfq. Counteroffer May Be Indicated At The Back Of This Rfq. ● Mayor's Permit, Tax Clearance & Philgeps Registration Certificate Shall Be Attached Upon Submission Of The Quotation. ● Bidders Shall Submit Clear And Readable Brochure, Cpr (if Applicable) And Other Required Documents. ● Price Validity Shall Be For A Period Of Sixty (60) Calendar Days; Or Within The Period Indicated Below ● Crh Reserves The Right To Accept Or Reject Any Quotation At Any Time Prior To The Awarding Of Contract Without Incurring Any Liability To The Affected Bidder Or Bidders Especially Those Considered Disadvantageous To The Procurement Processes Therein. ● Award Of The Contract Shall Be Made To The Lowest Calculated And Responsive Quotation Which Complies With The Technical Specifications, Other Terms And Conditions Required Herein. ● Whenever Awarded, The Purchase Order (po) May Be Sent Via Electronic Mail To The Official Email Address Provided Below By The Supplier. Provided That The Supplier Shall Confirm Receipt By Affixing Their Signature Within 7 Calendar Days From Receipt And Shall Return The Same To The Procurement Office Or Send It Back To Our Official Email Address At (crhprocurementamp@gmail.com) Immediately Thereafter. Failure On The Part Of The Supplier To Confirm Receipt Of The P.o. Emailed Within Seven (7) Calendar Days Shall Result In The Automatic Conformance/acknowledgment/acceptance Thereof. Hence, The Running Period For The Imposition Of Liquidated Damages Shall Commence Then On. ● Warranty Shall Be For A Period Of Six (6) Months For Supplies And Materials, One (1) Year For Equipment, From Date Of Acceptance By The Procuring Entity. ● Delivery Period Shall Be Within Thirty (30) Calendar Days Or The Period Indicated Below From Receipt Of Notice To Proceed, For Infrastructure It Will Depend On The Program Of Works. ● Failure Of The Bidder To Comply With The Aforementioned Requirements May Cause The Blacklisting Of The Supplier Or Imposition Of Penalties. Line Item No. Procuring Entity’s Description Approved Budget For The Contract Supplier's Bid Amount / Specification Description Qty Unit Of Measure Unit Cost Total Cost Unit Cost Total Cost Specification 1 Complete Vacuum Delivery System 20 Pcs 8,000.00 160,000.00 Specifications: • Versatile Use (for All Fetal Head Position) • Flexible Stem (for Flexion Point System) • Low Cup Profile (for Ease Of Insertion) • Palm Pump Technology (for Single Operator) • Traction Force Indicator (measures The Force Exerted) • Disposable (for Convenience And Safety) Intended Use: • For Vacuum Assisted Delivery ***nothing Follows*** Delivery Period:___________________________ Warranty:_____________________________ Price Validity:_____________________________ After Having Carefully Read, Conform And Accepted The General Terms And Conditions Stated Above And Thereby Quoted The Aforementioned Goods And Services. Supplier’s Or Authorized Representative’s Printed Name & Signature: _________________________________________________________________ Philgeps No.: _________________________________________________ Tin: ______________________________________________________ Contact Number: ___________________________________ Email Address: ______________________________________ Date: _______________

Details: Description 1. Cement (203 Bags) 2. Sand (18.5 Cu.m.) 3. Gravel (23 Cu.m.) 4. 10mm Dia X Gm Rsb (135 Pcs) 5. 12mm Dia X Gm Rsb (136 Pcs) 6. #16 G.i. Tie Wire (43 Kg) 7. 2"x6"x16' Coco Lumber (40 Pcs) 8. 2"x3"x16' Coco Lumber (70 Pcs) 9. 2"x4"xl6' Good Lumber (3 Pcs) 10. 2"x3"x16' Good Lumber (4 Pcs) 11. L/2"thk, Ordinary Plywood (16 Shts) 12. 4"thk Chb (565 Pcs) 13. Asstd. Cw Nails (10 Kgs) 14. 1/4"x2"x2"x16' Angle Bar (10 Pcs) 15. Welding Rod (5 Kg) 16. G.i. Pipe 3" Dia X 20' Sched 40 (5 Pcs) 17. G.i. Pipe 1" Dia X 20' Sched 40 (8 Pcs) 18. Coupling 3" Dia (4 Pcs) 19. Coupling 1" Dia (7 Pcs) 20. Electric Motor Pump 1 Hp (1 Unit) 21. Teflon Tape (12 Pcs) 22. 1" Dia Union Coupling Plastic Compression Fitting (2 Pcs) 23. Water Tank 2000l (1 Unit) 24. Apc Control (1 Pcs) 25. Pvc Solvent (6 Cans) 26. Float Control (1 Pcs) 27. Pvc Pipe 3/4" Dia X 3m (60 Pcs) 28. Pvc Pipe 1/2" Dia X 3m (45 Pcs) 29. Pvc Coupling Reducer (12 Pcs) 30. Pvc Elbow (18 Pcs) 31. Teflon Tape (6 Pcs) 32. Float Valve (1 Pcs) 33. 16mm Dia Rsb (18 Pcs) 34. Square Bar 12mm (12 Pcs) 35. 1/2" Thk Ordinary Plywood (8 Shts) 36. Epoxy Primer (2 Gal) 37. Paint Brush (2 Pcs) 38. Welding Rod (4 Kgs) 39. G.i. Sheet Roofing (1 Shts) 40. Roofing Nails (1 Kg) 41. Pdx Wire #12 (4 Box) 42. Circuit Breaker Plug In 20a (1 Pcs) 43. Safety Breaker (main) W/ Box 20a (1 Pcs) 44. Wire Clip (#2.0) (60 Pcs) 45. Screw 1" (60 Pcs) 46. Electrical Tape (big) (4 Pcs) 47. Plastic Moulding 3/4 (5 Pcs) 48. Thhn #6 (14mm') (66 Meters) 49. Service Drop (58 Meters) 50. Meter Box (1 Unit) 51. Meter (1 Unit) Equipment Rentals: 52. 1 Unit Backhoe (0.80 Cu.m.) (2 Days) 53. 1 Unit Welding Machine (13 Days) 54. 1 Unit Deep Well Draining Equipment (8 Days) 55. 1 Unit Rotary Hammer Drill/ Clipping Gun (12 Days) 56. Labor Atty. Michael E. Costelo, Jr., Rme Cgdh 1/ Head Bac Secretariat Mobile No. 0917 168 9211

Details: Description Republic Of The Philippines Province Of Batangas Nasugbu, Batangas Ib No. 24 – 78 Invitation To Bid For The Procurement Of Goods 1. The Municipal Government Of Nasugbu, Batangas Through Trust Fund Intends To Apply The Sum Of ₱1,120,000.00 Being The Total Approved Budget For The Contract (abc) To Payment Under The Contract For Procurement Of Goods Listed Below. Bids Received In Excess Of The Abc Shall Automatically Be Rejected At Bid Opening. Item No. Particulars Department Delivery Period Source Of Fund Approved Budget For The Contract 1. Supply And Delivery Of Sixteen (16) Units Diesel Water Pump Municipal Agriculture Office 7 C.d. Trust Fund ₱1,120,000.00 2. The Municipal Government Of Nasugbu, Batangas Now Invites Bids For The Above Procurement Projects. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipal Government Of Nasugbu And Inspect The Bidding Documents At The Office Of The Bids And Awards Committee, Plaza De Roxas, Municipal Compound, Escalera St., Barangay Ii, Nasugbu, Batangas (8:00 A.m. – 5:00 P.m.). 5. A Complete Set Of Bidding Documents May Be Purchased On November 15, 2024 – December 5, 2024 By Interested Bidders From The Address Below And Upon Payment Of A Non – Refundable Fee For The Bidding Documents In The Amount Of ₱5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. There Will Be A Pre – Bid Conference On November 22, 2024 (11:00 A.m.) To Be Held At The Office Of The Bids And Awards Committee, Plaza De Roxas, Municipal Compound, Escalera St., Barangay Ii, Nasugbu, Batangas. All Prospective Bidders May Attend The Conference. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On December 5, 2024 Until 11:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bids Will Be Opened On December 5, 2024, 2:00 P.m. To Be Held At The Office Of The Bids And Awards Committee, Plaza De Roxas, Municipal Compound, Escalera St., Barangay Ii, Nasugbu, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Nasugbu, Batangas Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Diana D. Ermita Local Civil Registrar Municipal Compound, Escalera St. Brgy. Ii Nasugbu, Batangas Phone No.: (043) 416 – 5213 Email Ad: Bacnasugbu@gmail.com (sgd.) Diana D. Ermita Bac Chairwoman