Pumps Tenders
Pumps Tenders
City Government Iligan Tender
Civil And Construction...+1Building Construction
Philippines
Closing Date19 Nov 2024
Tender AmountPHP 2.8 Million (USD 50 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund Intend To Apply The Sum Of P 2,898,505.28 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City With Project No. Cb(b)-24-128 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City • General Requirements *permits & Clearances; *installation Of Project Billboard,2 Sets; *occupational Safety & Health Program; • Removal Of Structures, Obstructions, Clearing & Grubbing *existing Concrete Structures; *cutting Of Trees •earthworks *excavation For Foundation ,tie Beam, Zocalo, Catch Basin, Wall-footing & Septic Vault; *backfilling & Compaction For The Slab On Grade; *gravel Bedding For Foundation ,slab On Grade, Tie Beam, Zocalo, Wall-footing, Septic Vault, & Catch Basin; • Concrete Works, Forms & Scaffoldings *concrete Pouring For Foundation, Columns, Tie Beam, Roof Beams, Septic Vault Flooring (top & Bot), Zocalo (foundation), Ramp Flooring , Wall-footing (foundation), Slab On Grade, & Catch Basin Flooring (top & Bot); • Masonry Works *installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor ,wall-footing , Septic Vault, Catch Basin,& Zocalo, W/plaster Finish,& Smooth On Expose Areas; *using 10mmø X 6m Deformed Steel Bars W/#16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @ 3rd Layer; • Steel Reinforcement *using 10mmø, 12mmø,& 16mmø Deformed Steel Bars W/#16 G.i Tie Wire; • Paint Works & Finishes; *skim Coating & Paint Works For All Wallings And Columns At Ground Floor; •tinsmithry Works *installation Of 0.4mm Thk. Colored Root Long-span Rib Type,0.4mm Thk. Pre-fab Flashing Gutter,0.4mm Thk. Pre-fab Fascia Cover, & 0.30m X 2.40m X 0.4mm Thk . Pre-fab Colored Gutter Spanish Type W/complete Accessories; • Ceiling Works *installation Of 4' X 8' X 4.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/complete Accessories ; • Tile Works *installation Of 300mm X 300mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Ceramic Wall Tiles W/pvc Tile Trim & 600mm X 600mm Floor Tiles; • Doors & Windows *installation Of Pre-fab Wooden Panel Door & Flush Door W/complete Accessories; & Aluminum Glass Door; *installation Of Fixed, Sliding & Awning Glass Window On Aluminum Frame W/complete Accessories; • Electrical Works; *installation Of Electrical Wirings , Connections W/complete Accessories & Fixtures; • Plumbing Works *installation Of Pvc Pipes, Fittings & G.i Pipes; *installation Of G.i Basket Strainer, Pipe Strap/clip W/nut & Washer For 3"ø Pipe (downspout); *installation Of Plumbing Fixtures Such As, Water Closet, Lavatory, Stainless Floor Drain, Stainless Wall Faucet, *installation Of Motor Pump, Water Meter, Check Valve, Gate Valve & Stainless Handrail Grab-bar; • Steel Works *fabrication & Installation Of 2" X 6" X 1.20mm Thk. Channel For Steel Trusses & Web Members, 1" X 1" X 4.0mm Thk. Angle Bar & 1" X 3.0mm Thk. Flat Bar For Steel Fascia Frame; *installation Of 2" X 4" X 1.0mm Thk. C-purlins W/ 10mmø Sagrods And Installation Also Of 6mm Thk. Base Plate And Must Be Full Weld On Steel Trusses At The Top Of The Column W/4-10mmø Anchor Bolt W/ Nut & Washer To Be Full Weld On Vertical Bars; *installation Of 1-1/2"ø Stainless Steel Pipe Railings- Grade 304 For Ramp Only; *all Steel Works Must Be Coat With Epoxy Primer; I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)- 6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Removal Of Structures, Obstructions & Clearing & Grubbing (q = 1.00 Lot) Includes Existing Concrete Structures, Cutting Of Trees. Vi. Earthworks (q = 78.01 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled/re-use, Pit Run Soil/earthfill, Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 25.98 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/2" Thk. Ordinary Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 231.21 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Steel Reinforcements (q = 2,720.67 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. X. Steel Works (q = 1,027.28 Kg/s) Includes 2" X 6" X 1.20mm Thk. Channel (rafter/truss) - 32pcs, 1" X 1" X 4.0mm Thk. Angle Bar - 18pcs, 1" X 3.0mm Thk. Flat Bar - 8pcs, 2" X 4" X 1.0mm Thk. C-purlins - 36pcs, Sagrods-10mmø X 6mm Dsb- 6pcs, 1-1/2"ø X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304, 4' X 8' X 6mm Thk. Mild Steel Plate, 10mmø Anchor Bolt (l-type) W/5% Wastage, Welding Rod (6011), Stainless Welding Rod, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi. Tinsmithry ( Q = 127.92 Sq.m.) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored Ridge Roll, 0.4mm Thk. X 8', Pre-fab Colored Flashing Gutter, 0.4mm Thk. X 8', 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes ( Q = 336.30 Sq.m.) Includes Skim Coat, Neutralizer, Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush 2", Sand Paper. Xiii . Ceiling Works (q = 80.00 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb, A = 80.00 Sq.m; 19mm X 50mm X 0.5mm Thk. X 5m Double Furring; W-clip; Blind Rivets (1000pcs/box); 1" X 3mm Screw; 300mm X 300mm Wall Exhaust Fan; Concrete Nails; Aviation Metal Snip Scissor; Riveter. Xiv. Tile Works (q = 107.00 Sq.m.) Includes 600mm X 600mm Ceramic Floor Tiles, A= 76.79 Sq.m; 300mm X 300mm Non Skid Ceramic Floor Tiles, A = 6.81 Sq.m; 300mm X 600mm Ceramic Wall Tiles, A = 23.40 Sq.m; Pvc Tile Trim, 6mm X 2.40m; Tile Adhesive, Heavy Duty; Tile Grout; Portland Cement; Washed Sand; Tile Cutter Disc. Xv. Doors & Windows ( Q = 28.00 Set/s) Includes D1: 1-panel, 1000mm X 2100mm Aluminum Push & Pull Glass Door W/complete Accessories; D2: D2: 900mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D3: D3: 800mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D4: 700mm X 2100mm Flush Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 3 Sets Steel Hinges & Heavy Duty Door Knob); Ds: 1000mm X 2100mm Pre Fab Flush Door W/ss Kick Plate & Louver W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Of Steel Hinges & Heavy Duty Lever Type Door Knob); W1: 2-panels, 1200mm X 1600mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W2: 3-panels, 1200mm X 2300mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W3: 4-panels, 1200mm X 3100mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W4: 1-panel, 1100mm X 1200mm Fixed Window W/complete Accessories On Aluminum Frame W/complete Accessories; Ws: 1-panel, 300mm X 300mm Awning Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (2pcs Stainless Hinges & Heavy Duty Cam Handle Lock) Xvi. Electrical Works (q = 1.00 Lot) Includes Service Entrance Cap,1" 1/2 Ø; Emt Pipe,1"1/2 X10'; Secondary Rack W/spool Insulator,2-pole,w/ Screws; Grounding Rod,10ft,1/2", Copper Plated; Ground Clamp, 1/2", Copper Plated; Panel Board Tqd 2-pole Main, 12 Branches 2-pole Tqc, Bolt-on; Moulded Case Circuit Breaker, 150at,2p, 30kaic @ 415vac; Circuit Breaker, 15a,bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 20a, Bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 30a, Bolt-on, 2pole, 220v, 60hz; Grounding Busbar, Copper; Cu Wire, 2.0mm2,thhn/ Thwn-2, Stranded; Cu Wire, 3.5mm2, Thhn/thwn-2, Stranded;cu Wire,;5.5mm2,thhn(thwn-2,;stranded; Cu Wire, 14mm2,thhn(thwn-2, Stranded; Cu Wire, 50mm2,thhn(thwn-2, Stranded; Switch,16a,spst,w/plate,1-gang; Switch, 16a,spst,w/plate, 2-gang; Switch, 16a,spst,w/plate, 3-gang; Duplex Universal Outlet W/ Ground & Shutter Set, 250vac, 15a; Aircon Outlet W/ Ground, 1gang, 20a; Utility Box,4x2x1.5 In, Pvc; Led Panel Light, 40 Watts, 40001m,30x30 Cm,220-240vac; Led Panel Light,72 Watts, 59001m, 120x60 Cm,220-240vac; Led Round Recessed Pinlight Housing W/ Beehive Reflector W/ Glass Cover,e27 Fixture,6"; Led Bulb, Lw,e-27; Junction Box With Cover And Screws,pvc; Pvc Flexible Hose 1/2" X 100 Meters Corrugated Flex Pipe Fire; Pvc Conduit Pipe,15mm Dia X 3m; Solvent Cement 100cc; Assorted Pvc Connectors; Electrical Tape 3/4" X20yds. Xvii. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" X 2" Sanitary Tee; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 3" Dia. Pvc Clean Out W/adapter & Plug; 3" X 2" Pvc Sanitary Wye; Pvc Pipe Strap/clip; Bolt (54pcs), Nut (54pcs) And Washer (54pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc Cross Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; G.i Basket Strainer;4" X 4" Stainless Floor Drain; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Stainless Water Faucet (for Lavatory), W/complete Accessories-heavy Duty; Wall Faucet, W/complete Accessories-heavy Duty; Stainless Steel Pwd Handrail Grab Bar-grade 304 W/complete Accessories; 1hp Motor Pump, Heavy Duty; Water Meter-heavy Duty; Gate Valve-heavy Duty; Check Valve Heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,898,505.28 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Forty (140) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-128 (ceo-infra)
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Philippines
Closing Soon5 Nov 2024
Tender AmountPHP 43.4 Million (USD 749.7 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00124 : National Building Program: Buildings And Other Structures-multipurpose Facilities - Structural Improvement Of Public Buildings And Construction Of Evacuation Centers-region Ii - Barangay Giayan, Nagtipunan, Quirino 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱43,425,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00124: National Building Program: Buildings And Other Structures-multipurpose Facilities - Structural Improvement Of Public Buildings And Construction Of Evacuation Centers-region Ii - Barangay Giayan, Nagtipunan, Quirino. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : National Building Program: Buildings And Other Structures-multipurpose Facilities - Structural Improvement Of Public Buildings And Construction Of Evacuation Centers-region Ii - Barangay Giayan, Nagtipunan, Quirino Contract Id No. : 24b00124 Location : Barangay Giayan, Nagtipunan, Quirino Brief Project Description : New Construction Of Permanent Evacuation Center With Generator Room And Elevated Water Tank Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) • Provision Of Furnitures/fixtures, Equipment & Appliances For The Field Office For The Engineer Other General Requirement • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization/demobilization • Geotechnical Investigation (soil) Earthworks • Excavation (surplus Common, Structure) • Embankment (from Structure Excavation) • Gravel Fill Subbase And Base Course • Aggregate Subbase Course Surface Courses • Pccp – 0.15 M Thick, 14 Day Concrete Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade 40 • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling (4.5mm Thick Ficem Board, Prepainted Metal Panel) On Metal Frame • Wall, Aluminum Metal Cladding • Carpentry And Joinery Works • Modular Partition • Finishing Hardware • Steel (window, Doors And Frames) • Aluminum Glass Windows • Wooden Doors And Windows • Fabricated Metal Roofing Accessory, 0.60 Mm, (flashing And Gutters) • Prepainted Metal Sheets (corrugated, Long Span,0.6mm Thk) • Waterproofing, Liquid • (glazed & Unglazed) Tiles & Trims • Cement Floor Finish, Colored • Nonslip Finish • Cement Plaster Finish • Decorative Stones • Painting Works, (masonry/concrete, Wood, Steel) • Reflective Insulation • Chb Non-load Bearing (including Reinforcing Steel) (100 Mm & 150mm) • Louver Block • Metal Structure Accessories, (turnbuckle, Bolts And Rods, Sagrods, Cross Bracing & Steel Plates) • Structural Steel (trusses, Purlins) • Railing • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Sanitary/plumbing Fixtures • Cold Water Lines Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pole Mounted Power Transformer (oisc) With Complete Accessories, Single Or Three Phase, Pole Type Or Flatform • Generator Single Or Three Phase Stand-by • Lighting Fixtures • Rc Pole Mechanical Works • Exhaust Fan, (wall Mounted) • Booster Pump With Control • Water Tank, Stainless • Air Conditioning System Approved Budget For The Contract (abc) : ₱43,425,000.00 Contract Duration : 242 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 50 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 15 - November 05, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos Only (₱25,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On October 22, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 05, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 05, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: October 15-21, 2024 Conspicuous Place (procurement Bulletin Board): October 15-21, 2024
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Philippines
Closing Soon5 Nov 2024
Tender AmountPHP 43.4 Million (USD 749.7 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00125 : National Building Program: Buildings And Other Structures-multipurpose Facilities - Structural Improvement Of Public Buildings And Construction Of Evacuation Centers-region Ii - Barangay Centro West, Santa Teresita, Cagayan 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱43,425,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00125: National Building Program: Buildings And Other Structures-multipurpose Facilities - Structural Improvement Of Public Buildings And Construction Of Evacuation Centers-region Ii - Barangay Centro West, Santa Teresita, Cagayan. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : National Building Program: Buildings And Other Structures-multipurpose Facilities - Structural Improvement Of Public Buildings And Construction Of Evacuation Centers-region Ii - Barangay Centro West, Santa Teresita, Cagayan Contract Id No. : 24b00125 Location : Barangay Centro West, Santa Teresita, Cagayan Brief Project Description : New Construction Of Permanent Evacuation Center With Generator Room And Elevated Water Tank Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) • Provision Of Furnitures/fixtures, Equipment & Appliances For The Field Office For The Engineer Other General Requirement • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization/demobilization • Geotechnical Investigation (soil) Earthworks • Excavation (surplus Common, Structure) • Embankment (from Roadway/structure Excavation) • Gravel Fill Subbase And Base Course • Aggregate Subbase Course Surface Courses • Pccp – 0.15 M Thick, 14 Day Concrete Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade 40 • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling (4.5mm Thick Ficem Board, Prepainted Metal Panel) On Metal Frame • Wall, Aluminum Metal Cladding • Carpentry And Joinery Works • Modular Partition • Finishing Hardware • Steel (window, Doors And Frames) • Aluminum Glass Windows • Wooden Doors And Windows • Fabricated Metal Roofing Accessory, 0.60 Mm, (ridge/hip Rolls, Flashing And Gutters) • Prepainted Metal Sheets (corrugated, Long Span,0.6mm Thk) • Waterproofing, Liquid • (glazed & Unglazed) Tiles & Trims • Cement Floor Finish, Colored • Nonslip Finish • Cement Plaster Finish • Decorative Stones • Painting Works, (masonry/concrete, Wood, Steel) • Reflective Insulation • Chb Non-load Bearing (including Reinforcing Steel) (100 Mm & 150mm) • Louver Block • Metal Structure Accessories, (turnbuckle, Bolts And Rods, Sagrods, Cross Bracing & Steel Plates) • Structural Steel (trusses, Purlins) • Railing • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Sanitary/plumbing Fixtures • Cold Water Lines Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pole Mounted Power Transformer (oisc) With Complete Accessories, Single Or Three Phase, Pole Type Or Flatform • Generator Single Or Three Phase Stand-by • Lighting Fixtures • Rc Pole Mechanical Works • Exhaust Fan, (wall Mounted) • Booster Pump With Control • Water Tank, Stainless • Air Conditioning System Approved Budget For The Contract (abc) : ₱43,425,000.00 Contract Duration : 242 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 50 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 15 - November 05, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos Only (₱25,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On October 22, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 05, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 05, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: October 15-21, 2024 Conspicuous Place (procurement Bulletin Board): October 15-21, 2024
Municipality Of Jordan, Guimaras Tender
Electronics Equipment...+3Publishing and Printing, Electrical and Electronics, Solar Installation and Products
Philippines
Closing Date11 Nov 2024
Tender AmountPHP 147.3 K (USD 2.5 K)
Details: Description Republic Of The Philippines Province Of Guimaras Municipality Of Jordan Bids And Awards Committee Request For Quotation (negotiated Procurement – Two Failed Bidding) Supply And Delivery Of Consolidated Office Supplies 1. In View Of The Two (2) Failed Biddings, The Municipality Of Jordan, Through Its Bids And Awards Committee (bac), Invites Philgeps Registered Suppliers To Participate In The Negotiated Procurement Of Supply And Delivery Of Consolidated Office Supplies With The Approved Budget For The Contract (abc) Of One Hundred Forty Seven Thousand Three Hundred Ten Pesos Only (p147,310.00) In Accordance With Section 53.1 Of The Revised Implementing Rules And Regulations (rirr) Of The Republic Act No. 9184. Stock No. Unit Item Description Qty. Municipal Tourism Office Abc= Php 67,000.00 1 Pc Epson Ink 664 Black (expiry: 2025/2026) 5 2 Pc Epson Ink 664 Yellow (expiry: 2025/2026) 5 3 Pc Epson Ink 664 Magenta (expriy:2025/ 2026) 5 4 Pc Epson Ink 664 Cyan (expiry: 2025/2026) 5 5 Ream Bond Paper Legal Size 10 6 Pc Envelope (long: Plastic Type: Plastic Envelope) 10 7 Ream Folder Legal Size 14pts (100pcs White) 1 8 Box Paper Fastener (plastic) 5 9 Box Paper Fastener (metal) 5 10 Box Paper Clip (big) 5 11 Box Rubber Band (no.16 50 Grams) 3 12 Pc Correction Tape 10 13 Pc Stapler With Staple Wire Remover#35 1 14 Pc Scotch Tape (2inch) 10 15 Pc Masking Tape (1 Inch) 5 16 Pc Double Sided Tape (1 Inch) 10 17 Pc Electrical Tape (black, 0.16mmmmx19mmx 8m) 5 18 Pack Photo Paper (glossy, 20 Sheets/pack, Size:a4) 5 19 Stub Sticky Notes (3x3 Inches, 80 Sheets/ Pad) 10 20 Pc Clip Board (legal; Red,; Plastic; No Cover) 10 21 Stub Reimbursement Expense Receipt Forms 10 22 Stub Daily Time Recor Forms 10 23 Box Push Pins 2 24 Pc Calculator (digital, 12 Digits, Solar Cell) 1 25 Box Thumbtacks (no.153 , 20 Grams) 10 26 Pc Multi-purpose Glue (240grams) 1 27 Gal Isopropyl Alcohol (gallon; 4l Per Gallon) 10 28 Box Latex/ Medical Gloves (100pcs/box) 1 29 Btl Air Freshener (spray, 320ml ) 5 30 Btl Multi-insect Killer Spray (600ml) 5 31 Pc Antibacterial Hand Soap (bar, 135grams) 24 32 Btl Muriatic Acid (500ml) 52 33 Pc Dishwashing Paste (400grams, Round Packaging) 10 34 Pc Dishwashing Sponge/pad (waist-type) 12 35 Pc Aa Battery 20 36 Pc Aaa Battery 20 37 Pc Indoor Doormat (soft Coil-type, H-:40in, L:60in, Black) 6 38 Pc Indoor Doormat (cotton- Type, 12 X 20 Inches, Black) 3 39 Pc Dust Pan (big, Plastic, L:26cm, W: 29cm, H:61cm) 2 40 Pc Soft Broom / Walis Tambo (double-sewing) 4 41 Pc Paper Cutter (wood- Based, Size; B4) 1 42 Pc Glass Window Cleaner Wiper/ Scraper (adjustable Long Handle, Rubber Wiper With Washing Sponge) 1 43 Btl Glass Cleaner Spray (500ml) 5 44 Unit Stand Fan (3 Steel Blades, Size: 16 Inches) 2 45 Roll Plastic Cover (transparent Clear Plastic Sheet, Notebook/ Book Cover, 30 Meters Per Roll) 1 46 Pc Soft Pencil Eraser (big 7.3 X 3.2 X 10cm) 20 47 Set Ups/ Uninterruptible Power Supply (output Capacity: 800va/ 450w, No.of Outlets:4, Dimension:30.5 X 16.05 X 9.25cm, Complete Accessories With Cord) 2 48 Unit Avr/ Automatic Voltage Regulator (voltage: 220v; Watts: 500 Watts; Max Capacity: 50va; Fuse: 5a; Socket:3 X 220v) 2 49 Pc High Stool Monobloc Chair (plastic, Height: 28 In, Diameter: 12in, Color: Green) 3 50 Pc Multi- Purpose Storage Box (heavy Duty, Plastic-type, Cap:143liters, Size: L 67cm X W 51 Cm X H 42cm, Black With Wheels/ Rollers With Side Clip) 1 51 Pc Flash Drive (64gb) 1 Mo- Jordan Wharf Management Unit Abc= Php42,500.00 1 Box Latex/ Medical Gloves (100pcs Per Box) 1 2 Box Facemask/ Surgical Mask3-ply (50pcs Per Box, Adult Size) 5 3 Stub Daily Time Record Forms 5 4 Stub Reimbursement Expense Receipt Forms 5 5 Sachet Dishwashing Liquid (sachet, 40ml) 100 6 Pc Toilet Bowl Cleaner (500ml) 25 7 Pc Antibacterial Soap (bar, 135grams) 50 8 Pc Toilet Bowl Brush (handle Size/ Length: 47cm) 5 9 Pc Laundry Brush 5 10 Pc Trigger Spray Bottle (500ml, Blue) 6 11 Pc Toilet Plunger/pump (suction/ Traditional Design, Wooden Handle, Leng: 18in) 3 12 Pc Water Dipper/ Tabo (plastic, Blue, 1l) 3 13 Pc Water Pail/ Timba (plastic, Black, 20l) 2 14 Pc Floor Push-brush/ Scrub (long Handle, H:45in L:16in) 4 15 Pc Traditional Broom Stick (walis Tingting) 10 16 Pc Soft Whisk Broom/ Walis Tambo (double - Sewing) 10 17 Pc Glass Window Cleaner Wiper/ Scraper (adjustable Long Handle, Rubber Wiper With Washing Sponge) 1 18 Pc Dust Pan (big, Plastic, L:26cm, W:29cm, H:61cm) 10 19 Pc Indoor Doormat (soft Coil-type, H:40in, L:60in, Black) 20 20 Pc Empty Rice -packing Sacks (polyethylene-type, Cap:50kgs) 150 21 Pc Hand Towel (cotton, L:52cm W:28cm) 10 22 Pc Caution Wet Floor Sign (plastic-type, Size:25inches In Height, Color: Yellow) 2 23 Pc Caution Tape (3 Inches X 300 Meters) 2 24 Pc Duct Tape (2 Inches) 2 25 Set Raincoat (adult Size: Xl, Color: Green, Complete Set With Pants And Reflective Strip/ Reflectorized Line) 5 26 Set Tornado Mop (complete Set) 4 27 Pc Tornado Spin Mop Head (standard Size) 5 28 Set Cloth Mop/ Ordinary Mop (non-spin, Complete Set) 4 29 Pc Mop Head (ordinary, Cotton-type) 4 30 Set Mop Squeezer Bucket (complete Set) 2 31 Pc Multi- Purpose Storage Box (heavy Duty, Plastic-type, Cap:143liters, Size: L 67cm X W 51 Cm X H 42cm, Black With Wheels/ Rollers With Side Clip) 1 Solid Waste Management Unit Abc= Php37,810.00 1 Ream Bond Paper Long 2 2 Ream Bond Paper A4 4 3 Reams Rizo Paper A4 2 4 Set Epson Ink (003) 4 5 Pcs Logbook (150pp) 20 6 Pcs Folder (long) 10 7 Pcs Folder (short) 10 8 Box Ballpen (black) 2 9 Box Pencil (any Number) 1 10 Pairs Cotton Gloves (l) 68 11 Pairs Chemical Resistant Gloves (l) 17 12 Pcs Raincoat (10l, 4m) 17 13 Pcs Rubber Boots 13 14 Box Facemask (50pcs/ Box) 10 15 Gal Alcohol 500ml 4 16 Pcs Germicidal Soap 6 17 Pcks Cotton Balls (100s) 2 18 Bars Detergent Soap 4 19 Gal Bleach 2 20 Gal Muriatic Acid 1 21 Bot Wound Solution 120ml 1 22 Roll Wound Gauze 2x10yards 1 2. The Schedule Of Bidding Activities Is Herein Stated Below: Activities Schedule Availability Of Request For Quotation An Other Documents Starting On October 30, 2024 Issuance And Availability Of Request For Quotation October 30, 2024- November 11, 2024 Submission Of Eligibility Technical Components And Financial Documents November 11, 2024 On 9:30am @ Bac Office Opening Of Request For Quotations November 11, 2024 10:00am @ Bac Office 3. Interest Bidders Shall Submit The Following Documents In Sealed Envelopes, Labeled As “negotiated Document”, With The Title Project Name Of The Bidder, Address Of The Bidder And Addressed To The Undersigned. 4. The Municipality Of Jordan Reserves The Right To Accept Or Reject Any Proposal And To Terminate The Procurement Process At Any Time Prior To Awarding Of Contract Without Thereby Incurring Any Liability To The Affected Suppliers. 5. For Further Information, Please Refer To: Ms. Sharon F. Fernandez Head Of The Bac Secretariat Municipality Of Jordan Poblacion, Jordan, Guimaras Tel No: 033-3225495 Email Address: Bacjordan2@gmail.com Issued This 29th Day Of October 2024. ____________________________________ Sgd_ Marilyn Efondo Municipal Budget Officer/ Bac Chairperson
Stadt Elsterwerda Tender
Electrical Goods and Equipments...+1Electrical and Electronics
Germany
Closing Date14 Nov 2024
Tender AmountRefer Documents
Details: Lot 6 Heating installation 1 piece air/water heat pump 15 kW incl. buffer tank 1 piece hot water tank 290 litres 85 m copper pipes, DN 12-32; incl. insulation 12 pieces fittings + pumps 35 m² underfloor heating 60 m² industrial surface heating 1 piece heating circuit distributor Fbh 3 pieces geothermal probes with drilling, brine distributor, brine pipes, incl. earthworks 4 m drainage channel incl. Cover lot 7 Electrical installation 3 pcs direct measurements 1 pc feed-in emergency power system 1 pc sub-distribution boards with built-in components 35 pcs installation devices 45 m cable routes 600 m cables/lines up to 5x6 mm² 20 pcs interior lights of different designs 3 pcs exterior lights (mounted lights) 17 pcs safety lights 120 m earthing cables 95 m lightning protection cables 1 pc smoke alarm system 1 pc computer system for 12 ports
University Of The Philippines Tender
Philippines
Closing Date25 Nov 2024
Tender AmountPHP 16.9 Million (USD 293.2 K)
Details: Description Supply Of Various Simulation Equipment For Clinical Simulation Laboratory Pelvic Simulator With Virtual System Specifications ● Enhance Knowledge Of Pelvic Anatomy And Acquire The Comprehensive Skills Required To Accurately Perform Pelvic Exams ● Combines A Physical Mannequin With A Computerized 3d Virtual System ● Sensors Are Placed On The Trainee’s Fingers Which Are Used In Conjunction With The Mannequin And 3d Virtual Model ● Provides Real-time Indication Of Finger Palpation, Downward Press On The Abdomen And Cervix Manipulation ● Interchangeable Anatomies Are Easily Replaced To Represent Normal And Pathological Anatomical Structures ● Comes With A Height-adjustable Cart ● Curriculum Videos Included For Online Learning And Self-instruction ● Self-learning With Skill And Procedural Tasks ● Anatomical Labeling, Organ Recognition System ● Palpation Or Movement Is Reflected To Provide A True-to-life Image Of Internal Pelvic Actions ● Anatomical Software Customization: Allows Learner To Choose The Anatomies And Content To Be Included In The Training Or Testing Session ● Performance Reports/ Metrics At The End Of Each Training Session Allow The Learner And The Trainer To Review Practice Results Components: ● All-in-one Computer ● Mannequin ● Platform Base ● Finger Sensors ● Speculum And Interchangeable Pap Test Tool (interchangeable Pap Test Tool Includes Cytobrush And Cervical Broom) ● 6 Interchangeable Anatomical Units (normal Uterus, Ovarian Cyst, Multiparous Uterus, Large Fibroid, Ectopic Pregnancy, And Retroflexed Uterus) ● Control Unit ● Wireless Keyboard And Mouse ● Foot Pedal Display Cart Components: ● Computer Tray ● Keyboard And Mouse Tray ● Rotating Mannequin Table ● Table-height Adjustment Mechanism ● Control Unit Tray Simulation Processing Unit: ● Computer ● Windows Os-based ● At Least 22” Touch Screen Physical Dimensions: ● Platform Size: At Least 20.8”(l) X 18.8”(d) X 5.8”(h) ● Control Unit: At Least 15”(l) X 9.5”(d) X 4.8”(h) Electrical And Environmental Characteristics: ● 100-240 V~, 50/60 Hz, 3.2a ● Operation Temperature: Range 10-30°c ● Relative Humidity: Maximum 90%: ● Cloud Web-based Management System ● User Friendly Simulator And Curricula Administration ● Customize And Design Courses And Curricula ● Allows Learner Progress Monitoring And Setting Training Goals Modules: 1. Anatomical Recognition ● In The Module, The User Palpates The Anatomical Mannequin The Same Way It Is Done When Performing Pelvic Procedures On Live Patients ● The Realistic Physical Mannequin Provides The Trainee With A Very Accurate And True-to-life Palpation Sensation ● Customization Allows The Course Director To Choose The Relevant Anatomies And Content To Be Included In The Training Session ● Consists Of At Least Two (2) Modes: Anatomical Recognition Practice Mode And Anatomical Recognition Test Mode 2. Pelvic Exam ● Provided With Interchangeable Anatomies That Represent Different Exam Types ● These Anatomies Enable Trainees To Virtually Encounter And Learn Various Pelvic Conditions Before They Perform The Exam On A Live Patient ● Trainees Gain The Ability To Recognize Normal And Abnormal Gynecological Findings And Practice Using The Proper Techniques To Perform Pelvic Exams ● Dynamic Anatomical Behavior: The Palpated Organs In The Virtual Model On The Screen Move In Synchronization With The Mannequin, Allowing The Learner To Receive Real-time Feedback On Movements Inside The Pelvic Cavity ● Consists Of At Least Two (2) Modes: Pelvic Exam Practice Mode And Pelvic Exam Test Mode 3. Speculum Examination And Pap Test ● Includes A Self-guided Step-by-step And A Test Case For Cervix Examination Using A Speculum And Perform A Pap Test ● Use True-to-life Speculum And Pap Test Tools Including A Cytobrush And A Cervical Broom ● Connected To A Virtual Model, Trainee Can Track Patient Discomfort During Examination, Accuracy Of Tools Position And Receive Feedback Through The Performance Report ● Visualization Of Speculum And Pap Smear Tools In Virtual Anatomical Model Assist In Orientation ● Dynamic Anatomical Behavior: Vaginal Movement Is Reflected To Provide A True-to-life Image Of Internal Pelvic Actions Adult Auscultation Training Simulator Specifications For Training Different Heart, Lung And Bowel Sounds. The Sounds Library Conforms To American Thoracic Society Guidelines. ● At Least 35 Heart, 18 Lung And 12 Abdomen Sounds ● Anterior And Posterior Auscultation Points ● All Auscultation Points Light Up ● Transmit Sounds To External Speakers ● Compatible With A Real Stethoscope Challenge Assessment Skills From Clear Clinical Findings To Detecting Faint Murmurs. The Flexible Operating Tablet Allows You To: ● Activate Or Deactivate Auscultation Points And Backlighting Individually ● Adjust Volume And Intensity Of Sounds ● Change Hr And Rr For A Sound That Is Currently Being Reproduced ● Compare Sound Recordings ● Sound Matches Ecg Diagrams And Other Vital Parameters Cardiac Auscultation 1. Normal Heart Sound 2. Split First Heart Sound 3. Split Second Heart Sound 4. Third Heart Sound (gallop) 5. Fourth Heart Sound (gallop) 6. Functional Murmur 7. Diastolic Murmur 8. Opening Snap 9. Holosystolic Murmur 10. Early Systolic Murmur 11. Mid-systolic Murmur 12. Continuous Murmur 13. Austin Flint Murmur 14. Pericardial Rub 15. Graham Steel Murmur 16. Aortic Valve Regurgitation 17. Aortic Valve Stenosis 18. Aortic Stenosis And Regurgitation 19. Congenital Aortic Stenosis 20. Mitral Valve Regurgitation 21. Mitral Valve Stenosis 22. Mitral Valve Prolapse 23. Pulmonary Valve Stenosis 24. Pulmonary Valve Regurgitation 25. Tricuspid Valve Regurgitation 26. Coarctation Of The Aorta 27. Hypertrophic Cardiomyopathy 28. Patent Ductus Arteriosus 29. Atrial Septal Defect 30. Ventricular Septal Defect 31. Acute Myocardial Infarction 32. Congestive Heart Failure 33. Systemic Hypertension 34. Acute Pericarditis 35. Dilated Cardiomyopathy Auscultation Of Lungs 1. Bronchial Breath Sounds 2. Bronchovesicular Sounds 3. Vesicular Breath Sounds 4. Diminished Vesicular Breath Sounds 5. Coarse Crackles 6. Fine Crackles 7. Wheezes 8. Rhonchi 9. Gurgling Rales 10. Stridor 11. Pleural Friction Rub 12. Cavernous Breath Sound 13. Abnormal Harsh Bronchovesicular Breath Sounds 14. Asthma 15. Covid-19 16. Left-sided Pneumothorax 17. Right-sided Pneumothorax 18. Pneumonia Abdomen Auscultation 1. Normal Bowel Sound 2. Hyperactive Sounds 3. Hypoactive Sounds 4. Borborygmus 5. Capotement 6. Peritoneal Friction Rub 7. Normal Bowel Sound With Bruits 8. Irritable Bowel Syndrome 9. Diarrhea 10. Ulcerative Colitis 11. Crohn’s Disease 12. Functional Intestinal Obstruction 13. Paralytic Ileus Bluetooth Compatible Adult Full-body Resuscitation Manikin Specifications A Full-body Cpr Manikin With A Rechargeable Battery, Designed To Represent A Standard Adult Cardiac Arrest Patient (in Terms Of Required Chest Compression Force). It Simulates An Adult Of Average Physiology And Is Designed For Realistic Training In Basic Life Support Techniques Following International Recommendations. ● High-performance Cpr Training For Professional First Responders ● The Airway (aw) Head Is Designed For Supraglottic (sg) Intubation Supporting The Protocol For Doing Endotracheal (et Or Eti) Intubation In A Resuscitation Team Training Setting ● The Aed Skin Includes A Connector To Real And Simulated Aed Trainers, Enabling Aed Trainings In A Resuscitation Team Training Setting ● Enables Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback To: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief ● Multiple Chest Stiffnesses With Qcpr Feedback Device Includes: ● Full Body Manikin With Rechargeable Battery (1) ● Trolley Bag (1) ● 45kg Compression Spring Installed (1) ● 2 Extra Compression Springs (30kg And 60kg) (1) ● Training Pads Multi (1) ● Manikin Wipes Pkg (4) ● Important Product Information (1) ● User Guide (1) ● Airway Assemblies (2) ● Usb A-c (1) ● Ac Power Adapter Usb 2a (1) Bluetooth Compatible Child Full-body Resuscitation Manikin Specifications A Professional-grade Pediatric Cpr Manikin Designed To Represent A 5–6-year-old Boy, Which Enables Professional First Responders To Practice Cpr Skills And High-performance Team Training. The Manikin Is Bluetooth Enabled For Qcpr Feedback Device. ● Enables Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback To: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief With Qcpr Feedback Device Includes: ● Full-body Manikin With Jacket And Shorts ● Soft Carry Case That Doubles As Training Mat ● Pulse Bulb ● Manikin Wipes ● Face Masks ● At Least 2 Junior Airways ● Product Information ● User Guide ● At Least 2 Airway Assemblies, Usb A-c ● Ac Power Adapter Usb 2a ● 4 Aa Size Batteries Bluetooth Compatible Infant Full-body Resuscitation Manikin Specifications A Professional-grade Infant Cpr Manikin Designed To Represent A 3-month-old Baby, Which Enables Professional First Responders To Practice Cpr Skills And High-performance Team Training. The Manikin Is Bluetooth Enabled For Qcpr Feedback Devices. ● Facilitates Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback For: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief With Qcpr Feedback Device Includes: ● Full-body Manikin With Onesie Clothing And Rechargeable Battery ● Carry Case 20 L ● Pulse Bulb ● At Least 5 Disposable Airways ● 2 Baby Standard Head Face Skins ● Manikin Wipes ● Baby Blanket ● Qcpr Armband ● Product Information ● User Guide ● At Least 2 Airway Assemblies ● Usb A-c ● Ac Power Adapter Usb 2a Blood Pressure Measurement Trainer Specifications Lifelike, Adult Arm With An Electronic Trainer Designed For Training The Procedure Of Nibp Measurement. ● Palpable Antecubital Pulse ● Blood Pressure Trainer With Lcd Guided Operation ● Systolic, Diastolic, Heart Rate And Auscultatory Gap Are Programmable ● Representation Of Both Systolic And Diastolic Pressures ● Indication Of Gauge Reading As Pressure Is Increased Or Decreased ● Adjustable Volume Adult Airway Management Trainer Specifications ● Manually Inflatable Tongue To Simulate Obstructed Airway Or Tongue Edema ● Anatomically Correct Internal Anatomy Facilitates Airway Management Skills Using Manual Maneuvers And Mechanical Devices ○ Updated Airway Allows For Insertion Of Standard Airway Devices With The Addition Of The Lma, Combitube And King Lt ○ Oropharyngeal And Nasopharyngeal Airway Insertion ○ Endotracheal And Right Mainstem Intubation ○ Needle Or Surgical Cricothyrotomy ○ Retrograde Intubation ○ Bag-valve-mask Ventilation ○ Tracheal Suctioning Pediatric Airway Management Trainer Specifications ● Anatomically Accurate Airway ● Pediatric Torso ● Oropharyngeal And Nasopharyngeal Airway Insertion ● Endotracheal Tube Insertion And Securing ● Bag-valve Mask Ventilation ● Tracheal Suctioning ● Manually Generated Carotid Pulse ● Closed Chest Compressions Includes: ● 1 Pediatric Torso Trainer ● 1 Can Of Manikin Lubricant ● 1 Carry Case ● Directions For Use Infant Airway Management Trainer Specifications Realistic Anatomy Of A Three-month-old Infant For Teaching And Practicing Basic And Advanced Airway Management Skills. ● Realistic Representation Of Human Anatomy, Tissue, And Skin Material ● Allows Students To Undertake Training That Is Directly Transferable To The Clinical Setting ● Minimal Maintenance And Robust Design Enable Cost Effective Training ● A Base Plate Mount Allows Stable Practicing Conditions And Easy Transportation ● The Cover Prevents Dust From Coming Into Contact With The Head During Storage Product Features: ● Realistic Anatomy Of The Tongue, Oropharynx, Epiglottis, Larynx, Vocal Cords, And Trachea ● Practicing Of Oral And Nasal Intubation ● Practicing Use Of Lma (laryngeal Mask Airway) ● Correct Tube Placement Can Be Checked By Practical Inflation Test ● Bag-valve-mask Ventilation Can Be Practiced ● Sellick Maneuver Can Be Performed ● Stomach Inflation ● Realistic Tissue Simulation Leopold’s Maneuvers Task Trainer Specifications Comprehensive Maternal Body Set For Skills Training In Labor And Delivery. Combination Of Modules Offer A Variety Of Skills Training Features ● Realistic Reproduction Of The Birth Canal Allows For Pelvic Examination In Accordance With The Progress Of Delivery. ● The Ability To Perform Various Techniques (mcroberts Position, Woods Screw Method, Etc.) In Fetal Malposition And Shoulder Dystocia. Training Skills / Applications ● Delivery ● Pelvic Examination ● Normal Delivery ● Delivery Of Placenta And Umbilical Cord ● Reproduction And Handling Of Shoulder Dystocia And Fetal Malposition ● Vacuum Extraction ● Forceps Delivery ● Breech Delivery ● Delivery Of The Placenta ● Treatment Of The Fetus ● Umbilical Cord Entanglement ● Umbilical Cord Clamping And Cutting ● Palpation Of The Anterior/posterior Fontanels ● Suctioning Procedures Through Mouth And Nose Set Includes At Least The Following ● 1 Maternal Body ● 1 Skin Cover ● 2 Clamps ● 1 Fetus ● 1 Placenta ● 1 Umbilical Cord ● 3 Umbilical Cords For Omphalotomy ● 5 Velamen Sheets ● 1 Lubricant ● 1 Bottle For Lubricant ● 1 Talcum Powder ● 1 Towel ● 1 Instruction Manual Wound Care Task Trainer – Leg Specifications Wound Care Task Trainer Molded From An Actual Patient For True-to-life Realism. The Following Conditions* Are Presented: ● Venous Ulcers ● Cellulitis ● Stasis Dermatitis ● Varicose Veins ● Hemosiderin Staining Vasculitis ● Lipodermatosclerosis ● Calciphylaxis ● Pyoderma Grangrenosum ● Healed Foot Ulcer ● Fungal Thickened Toenails ● Maceration ● Diabetic Ulcer ● Atrophie Blanche ● Pitting Edema ● Reticular And Telangiectasia Veins. The Top Of The Leg Model Has A Unique Molded-in Swivel Fixture That Permits The Leg To Be Rotated A Full 360 Degrees For Easy Visualization. Wounds Associated With Venous Disease And Other Wounds On The Lower Leg And Foot Are Often Extremely Painful For The Patient, Thus Adding Urgency To Their Effective And Efficient Identification And Treatment. Includes A Display Stand Which Permits The Trainer To Pivot From Above The Knee And Rotate 360 Degrees, Providing A Realistic Experience In Supporting The Leg While Practicing Compression Wrapping, Dressing Changes Or Identifying Conditions In A Teaching Situation. Pediatric Iv Training Hand Specifications Set Of Pediatric Hands For Practicing Iv Features 1. Fingers And Dorsum Of Hand Are Flexible, Able To Be Gripped, And Repositionable As In Real-life Procedures 2. Two Puncture Sites On The Back Of The Hand 3. Practice Dressing And Securing The Cannula Training Skills / Applications ● Pediatric Dorsal Veins Injection ● Blood Collection ● Intravenous Infusion Set Includes: ● 2 Injection Arm-hands (one-year-old) ● 2 Injection Arm-hands (three-year-old) ● 2 Stands ● 1 Circulation Pump ● 10 Cotton Swabs ● 1 Spoon ● 1 Plastic Jar ● 1 Plastic Beaker ● 1 Storage Case ● 1 Instruction Manual Pediatric Iv Training Arm Specifications Lifelike Pediatric Arm Reproduction With Replaceable Skin And Multi-vein System Designed For Peripheral Intravenous Therapy. ● Venipuncture Possible In The Antecubital Fossa And Dorsum Of The Hand ● Accessible Veins Include Median, Basilic And Cephalic ● Arm Will Articulate To Pediatric Manikins And Task Trainers Kit Includes: ● 1 Pediatric Iv Arm - Right ● 1 Replacement Skin And Multi-vein System ● 1 Bottle Red Simulated Blood, ● 1 Can Of Manikin Lubricant ● 1 Blood Bag With Tubing And Connector ● 1 Clamp And Hook ● 1 Set Of Shoulder Attachment Hardware Pediatric Clinical Skills Trainer (for Ngt/ogt, Catheterization, Iv Insertion) ● Realistically Representing At Least, A Six-year-old Child For Skill And Scenario-based Training Of The Care And Management Of A Variety Of Pediatric Patients. For Clinical Training Of Common And Uncommon In-hospital Pediatric Patients Including Wound Assessment And Care, First Aid, And Child Abuse Training. ● Provides Training Targeting Key Skills Specific To Pediatric Care Providers. Designed To Meet The Training Requirements For Pediatric Patient Care And Helps Facilitate Delivery Of Consistent Simulations Into Nursing Curriculums. Features: 1. Articulating Iv Arm Allows For Practice Of Iv Cannulation, Medication Administration And Site Care And Maintenance. Venipuncture Possible In The Antecubital Fossa And Dorsum Of The Hand. Accessible Veins Include Median, Basilic And Cephalic. 2. Interchangeable Male And Female Genitalia Allow For Complete Urinary Catheterization. Enema Procedures May Also Be Performed. 3. Head With Anatomical Landmarks, Trachea, And Esophagus Along With Simulated Lungs And Stomach Allow The Practice Of Many Procedures, Including Ng, Og, Tracheal Care And Suctioning, And Insertion, Securing And Care Of Endotracheal Tubes. Arterial Blood Extraction Trainer Specifications Features 1. Palpable Arterial Pulse 2. Realistic Resistance Of Tissue And Artery Wall Felt With The Injection Needle 3. Natural Flashback Training Skills / Applications ● Radial Arterial Puncture ● Artery Blood Sampling ● Radial Line Placement Set Includes: ● 1 Wrist And Hand Model ● 1 Circulation Pump ● 2 Sets Of Puncture Skins (inner And Outer Skin) ● 4 Artery Tubes ● 1 Silicon Tape ● 1 Jar Of Coloring Powder (red) ● 1 Spoon ● 2 Plastic Jars ● 2 Connection Tubes ● 1 Vinyl Sheet ● 1 Syringe ● 1 Storage Case ● 1 Instruction Manual 3d Printer With Basic Materials Specifications ● Print Technology: Fusion Deposition Modeling (fdm) ● Composites-capable 3d Printer W/ Cc Core (high-strength Glass And Carbon Fiber Filament) ● Compatible With Metal 3d Printing Filament 316l / 17-4ph Material And Over 40+ Different Engineering Materials ● Large Build Volume: At Least 330 X 240 X 300 Mm (13 X 9.4 X 11.8 Inches) ● Compatible With Down To 20 Micron (0.001 Inch) Layer Resolution ● Print Head: Dual Extrusion Print Head With A Unique Auto-nozzle Lifting System And Swappable Print Cores ● Capable To Utilize Aa Print Core ● Technology Nozzle Type ● Bb Print Core Technology For Dissolvable Support Nozzle Type ● Cc Print Core For Composites And Abrasive Materials ● Print Head Compatibility ○ Aa Print Core - Build Material ○ Bb- Print Core - Support Material ○ Cc Print Core - Composite Material ● Materials: Compatible With 190+ Different Materials ● Integrated Air Manager ● Air Extraction Rate: 1 - 50 M3/h (35m3/h Nominal Rate For Most Materials At 23°c) ● Osite Material Speed And Precision: ● Print Speed: Min. 30- Max. 300mm/s ● Travel Speed: Min. 30- Max. 350mm/s Up To 16mm3/s ● Precision: 12.5/12.5/5 Micron ● Nozzle Options: 0.25mm / 0.4mm / 0.6mm / 0.8mm Diameter ● Print Surface: Pei Printing Surface ● Inductive Sensor: Yes ● Build Plate: Flexible ● Heatup Time: <2mins ● Auto Detection Of Materials Thru Nfc Technology Material Input ● Sound Operation Level: >51dba ● Built-in Live 1080p Camera ● Includes Software ● Future Proof Investment ● Automatic Materials Switching ● Materials Capacity: Up To Six Spools ● Materials Loading: Front Loading Connection ● File Types: Stl/obj/dae/amf ● Os Requirement: Windows/mac/ubuntu Linux ● Electrical: 100-240vac; 50-60hz ● Open Filament System – Print With Any 2.85 Mm Material ● Connectivity: Wifi, Ethernet, Lan, Usb Drive Connectivity ● 4.7-inch Touchscreen Interface ● Bowden Driven Extruder Technology ● Ruby-tipped Nozzle Option Available Inclusions: ● 3d Printer ● 1 Spool Of Tough Pla Filament And 1 Spool Of Pva (dissolvable) ● Heated Glass Bed ● Front Glass Enclosure ● Usb Thumb Drive, Calibration Card ● Maintenance Tools ● Nfc Spool Holder ● 2x Print Core Aa ● 1x Print Core Bb (for Pva Supports) ● Software With Unending Enterprise Software Subscription And Access To E-learning Modules ● Materials Station ○ Includes 6 Material Storage Equipped With Pre-feeders Which Automatically Swap Between Filaments During Run Outs. ○ Condition Filaments To Optimal Quality And Acts As A Dry-box ● 2 Units Of Filaments Dryer Storage Box ● 3 Units Of Filaments Storage Box ● 1 Unit Of 114l Filament Dry-box ● Speed Kit Bundle With: ○ 2x 0.8 Mm Aa Print Cores For Build Materials ○ 2x 0.8 Mm Bb Print Cores For Support Material Pva Removal Station Specifications Removal Station That Dissolves Support Material Of Prints Quickly And Effectively. ● Container Volume 13.7 Liters ● Maximum Part Size That Can Be Dissolved W 200 X D 230 X H 165 Mm (w 7.8 X D 9 X H 6.4 In) ● Supported Materials: Pla And Pva, Petg, Tough Pla, Nylon, Or Cpe In Combination With Pva ● Supported Solvents: Water ● Rotor Speed: 225 Rpm (normal), 100 Rpm (low) Physical Dimensions At Least W 303 X D 325 X H 374 Mm (w 11.9 X H 12.8 X D 14.7 In) Net Weight At Least 6.35 Kg (14 Lbs) Container Weight (when Empty) At Least 4.2 Kg (9.3 Lbs) Electrical Requirements Voltage: 100 - 240 V Ac Frequency: 50 - 60 Hz Power: 38 W Filaments Starter Bundle Specifications Filaments Starter Bundle Including: ● 5 Units Of Pla ● 5 Units Of Tough Pla ● 5 Units Of Petg ● 5 Units Of Pva ● 3 Units Of Breakaway Infant Warmer Specifications ● Pre-warm Mode Control, Manual Mode Control And Baby Mode Controlled By Micro-computer; ● Set Temperature And Baby Temperature Can Be Displayed Separately; ● Horizon Angle Of Heater Head And Inclination Of The Bassinet Can Be Adjusted; ● The Panels Around Bassinet Can Be Turned Outward; ● X-ray Cassette Under The Bassinet. ● With Wheels And Wheel Breaks ● 1 Unit Only.
National Irrigation Administration Tender
Civil And Construction...+1Irrigation Work
Philippines
Closing Date20 Nov 2024
Tender AmountPHP 13 Million (USD 225.3 K)
Details: Description Section I. Invitation To Bid Invitation To Bid For Construction Of Canalization And Canal Structures For Dipolog Nis The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-repairnis2025-004 (infra) Project Name : Construction Of Canalization And Canal Structures For Dipolog Nis Contract Location : Dipolog, Zamboanga Del Norte Scope Of Works : Construction Of Canalization And Canal Structures (sta. 0 + 713.13 – Sta. 1 + 497.80) Dc Approved Budget For The Contract (abc) : Php 13,050,977.75 Contract Duration : 180 Calendar Days Amount Of Bidding Documents : Php 25,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : October 28 – November 20, 2024 At 8:30 Am Pre-bid Conference : November 8, 2024 At 9:00 Am Submission Of Bids : November 20, 2024 At 8:30 Am Opening Of Bids : November 20, 2024 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting October 28 – November 20, 2024. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 November 2024 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 November 2024 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/unk-ujzz-kkq Opening Of Bids : Https://meet.google.com/gdi-fdbf-gij Any Requests For Additional Information Concerning This Bidding Shall Be Directed To The Following: Marietta M. Cortes Bac Secretariat Head, Nia-regional Office Regional Center Ix, Balintawak, Pagadian City, Zambo. Sur Niaregion9bac@gmail.com 09630884373 – Office Number Date Posted: August 1, 2024 (sgd) Antonio B. Gujeling Bac Chairperson 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation & Flood Control To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Irrigation Structures. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Backhoe 0.45-1 Cu.m 2 Dumptruck 10 Cu.m 2 Concrete Mixer 1 – Bagger 2 Water Pump 4” Ø 2 Concrete Vibrator 5 Hp 2 Plate Compactor 5 Hp 1 Survey Instrument 1 Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Backhoe 0.45-1 Cu.m 1 Dumptruck 10 Cu.m 1 Survey Instrument 1 The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit A. Canalization Common Excavation (mechanized) 904.74 Cu.m Common Backfill (mechanized) With Compaction 3,886.80 Cu.m Class B Concrete, 16.56 Mpa 354.24 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 20,203.73 Kg Gravel Bedding 266.79 Cu.m B. Canal Structures Structure Excavation (mechanized) 150.40 Cu.m Structure Backfill (mechanized) 230.05 Cu.m Class A Concrete, 20.76 Mpa 18.78 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 954.03 Kg C. Project Billboard 1 Ls D. Temporary Works, Mobilization And Demobilization 1 Ls E. Occupational Construction Safety And Health Program 1 Ls
DEPT OF THE NAVY USA Tender
Civil And Construction...+2Others, Pipe Line Project
United States
Closing Soon1 Nov 2024
Tender AmountRefer Documents
Details: Notice Type: Sources Sought solicitation No: N4008525r2522 response Date: 11/1/2024 2:00 Pm Eastern Time classification Code: Y naics Code: 236220 magnitude Of Construction: Between $25,000,000 And $100,000,000 this Is A Sources Sought Notice Only. This Is Not A Request For Proposal Or Invitation For Bid. There Will Not Be A Solicitation, Specifications Or Drawings Available At This Time. the Naval Facilities Engineering Command, Mid-atlantic Is Seeking Eligible Small Businesses, Hub Zone Small Businesses, Small Disadvantaged Businesses, Veteran-owned Small Businesses, Service-disabled Veteran-owned Small Businesses, And Women-owned Small Businesses Capable Of Performing Design-bid-build, For The P502 Replace Mcas Beaufort Fuel Pier, Marine Corps Air Station Beaufort, South Carolina. this Project Will Replace A Circa 1957 Pier With A New Fuel Pier That Meets Mil-hdbk- 1025/department Of Defense (dod) Unified Facilities Criteria (ufc) 2-000-05n, Facility Planning Criteria For Navy/marine Corps Shore Installations, Ccn 151-40, Ufc 4-150-02, Dockside Utilities For Ship Service, Ufc 3-201-01 Civil Engineering, Updated Sept 2020, And Ufc 4-152-01 Design: Piers And Wharves. Construction Will Include A Single Deck Fueling Pier Approximately 40 Linear Feet (lf) Wide And 169 Lf Long With A Pile Supported Concrete Approach That Is Approximately 25 Lf Wide And 200 Lf Long, With A Minimum 20 Lf Wide (inside Curb-to-curb) Vehicle One-way Travel Lane. The Piping Will Be Protected By Curbing On Either Side And Will Also Provide Containment In The Event Of A Leak. connecting The Pier And Approach Is A Section Of The Pier Which Measures Approximately 40 Lf Wide By 63 Lf Long, Creating A Pier Resembling A T Shape. the New Facility Will Be Constructed Concurrently With Demolition Of The Existing Facility, Allowing Ability To Maintain Existing Operations. Once Completed, The New Facility Will Also Serve As A Berthing/mooring Pier For Barges And At The Height Required Due To Slr. Primary Facilities Include New Concrete Piles, Decking, Storage Shed, Mooring Dolphins And Fuel Piping To/from The Loading Arm. Providing New Pier With Fueling Arm So That The Facility Will Have Two Defueling Options Instead Of Just One. This Added Redundancy Will Prove Advantageous In Case Of Maintenance On Either Defueling Access Point. Access To The Existing Small Support Crafts Will Be Maintained Throughout Construction, And The Approach Will Be In Almost The Same Footprint As Original, To Maintain Fuel Services, Temporary Lines May Be Required Or Existing Lines Supported In Place During Demolition And Construction. the Fuel Pier Site Is Located In The 100-year Flood Plain. The 2018 Marine Corp Air Station Beaufort (mcas Be) Fuel Pier Analysis Concluded That Equipment Could Be Negatively Affected By Floodwaters Elevated To Two-feet Above The High-water Level Of A Projected 100-year Flood. The Recommended Elevation Was To Be 11.4 Feet. in Sept 2020, The Ufc 3-201-01 Civil Engineering Was Updated For New Requirements, And Was Used In The 2021 Mcas Be Sea Level Rise (slr) Modeling Report. The Report Has Shown The Projected Slr Elevation In Coordination With The Updated Ufc 3-201-01 Civil Engineering, Ufc 3-460-01 Design: Petroleum Fuel Facilities, And Ufc 4-152-01 Design: Piers And Wharves. The Navfac Slr Subject Matter Expert (sme) Advised That P502 Will Fall Within Subcategory 3b: (high Risk, Essential Facilities) From Table 2-1 For Design Flood Elevation In Ufc 3-201-01. The Slr Sme Further Recommended Following The Department Of Defense Regional Sea Level (drsl) Database Approach, To Determine The Pier Deck Elevation. The Second Approach Outlined By Ufc 3-201-01 Is The Drsl Approach That Bases The Design Flood Elevation On The Drsl 2065 High Slr Scenario. Based On The Drsl Approach, The Bottom Of The Deck Would Need To Be At An Elevation Of 14.66 Feet Above Current Sea Level. this Project Includes The Realignment And Elevation Of Quilali Road To The Extent Required In Order To Provide Proper Access And Slope To The New Pier Deck Height. The New Road Will Be Elevated And Extended To Allow For Gradual Grading, With Sloped Embankments And Riprap Revetment On The Waterside To Prevent Erosion. [navfac Structural Engineer] tie-ins To Existing Infrastructure Such As Pump Stations And Storage Tanks Will Be Needed. additional Items Include Flexible Connections Where The Trestle Ties Into The Bulkhead/roadway. There Will Be Around A 6% Slope Along Quilali Road To Accompany The Adjusted Height Of The Pier. There Needs To Be An Elevation Difference Less Than 6.4 Ft From The Shore To The Deck Of The New Wharf. Elevate Parts Of Quilali Road Eight Percent To Support Smooth Transition Of Trucks/mobile Cranes From Trestle To Wharf, And Having A Floating Wharf For Defueling In Accordance With Ufc 4-152-01 Design: Piers And Wharves. [2021 Slr Modeling Report.] the Existing Small Boat Facility Will Have A Gangway Added From The Newly Constructed Pier Along With Connections To A New Water Line. The Length Of The Gangway May Need To Be Altered To Avoid Becoming Too Steep After The Increase In Pier Height Requirement. In Addition, Breasting Platforms May Need To Be Elevated And According To Exwc Report From 2018 Marine Corp Air Station Beaufort (mcas Be) Fuel Pier Analysis The Small Boat Facility May Need To Be Replaced Due To Structural Deficiencies And Maintenance Issues. operations And Maintenance Support Information (omsi) Is Included In This Project. facilities Will Be Designed To Meet Or Exceed The Useful Service Life Specified In The Dod Unified Facility Criteria. Facilities Will Incorporate Features That Provide The Lowest Practical Life Cycle Cost Solutions Satisfying The Facility Requirements With The Goal Of Maximizing Energy Efficiency. supporting Facilities Include Utilities And Connections (lighting, Power, And Potable Water Lines), Minor Site Civil Work (riprap, Fill, Etc.) And Site Demolition. Site Demolition Will Include Removing The Existing Decking, Beams, Vertical Piles, Utility Lines, Fuel Piping, Potable Water Piping, And Mooring. Existing Equipment Such As Oil Booms, Etc. Will Be Reused If Available And In Good Condition. Along With The Utilities, The Assumption Is That A Fire Protection Would Be Required In The Form Of A Stand-pipe System. this Project Will Provide Anti-terrorism/ Force Protection (at/fp) Features And Comply With At/fp Regulations And Physical Security Mitigation In Accordance With Ufc 4-020-01 Dod Security Engineering Facilities Planning Manual. special Costs Include Post Construction Contract Award Services (pcas), Geospatial Surveying & Mapping, And Cybersecurity Commissioning. facility-related Control Systems Include Cybersecurity Features In Accordance With Current Dod Criteria. dod And Department Of The Navy Principles For High Performance And Sustainable Building Requirements Will Be Included In The Design And Construction Of The Project In Accordance With Federal Laws And Executive Orders. Low Impact Development Will Be Included In The design And Construction Of This Project As Appropriate. facilities Will Be Designed To Meet Or Exceed The Useful Service Life Specified In Dod unified Facility Criteria. Facilities Will Incorporate Features That Provide The Lowest practical Life Cycle Cost Solutions Satisfying The Facility Requirements With The Goal Of maximizing Energy Efficiency. the Appropriate Northern American Industry Classification System (naics) Code For This Procurement Is 236220 – Commercial And Institutional Building Construction, And The Small Business Size Standard Is $45,000,000. In Accordance With Dfars 236.204, The Magnitude Of Construction For This Project Is Between $25,000,000 And $100,000,000. The Contract Will Include Far Clause 52.219-14 Limitations On Subcontracting, Which States That “the Concern Will Perform At Least 15 Percent Of The Cost Of The Contract, Not Including The Cost Of Materials, With Its Own Employees.” This Office Anticipates Award Of A Contract For These Services By Nov 2025. it Is Requested That Interested Small Businesses Submit To The Contracting Officer A Capabilities Package, To Include The Sources Sought Contractor Information Form, Sources Sought Project Information Form And Sources Sought Project Matrix, Provided As Attachments To This Notice. the Sources Sought Project Information Form And Sources Sought Project Matrix Shall Be Used To Document A Minimum Of One (1) Fuel Transfer Facility And Up To A Maximum Of Five (5) Relevant Construction Projects Completed In The Past Ten (10) Years That Best Demonstrate Experience On Projects That Are Similar In Size, Scope And Complexity To The Project Described Herein. a Relevant Project Is Further Defined As: size: Final Construction Cost Of $10 Million Or Greater. Total Construction Area Of More Than 5,000 Square Feet. scope: Prime And/or Subcontractor With Construction Of Municipal, Governmental, Industrial Fuel Transfer Facility With Reinforced Concrete Pile Supported Waterfront Structure Experience. Fuel Facilities Will Include Fuel Transfer Equipment. complexity: While Also Meeting The Scope Requirements Set Out Above, The Following Complexity Requirements Shall Be Met Collectively By The Projects Submitted, I.e. Each Submitted Project Does Not Require Demonstrated Experience With All Of The Following Components, But Collectively, Experience With All Of The Complexity Elements Below Must Be Established Throughout The Submitted Relevant Projects. Each Project Submitted Must Demonstrate Experience Constructing A New Reinforced Concrete Pile Supported Structure In A Waterfront Environment: dod, Commercial, Or Municipal Fuel Transfer Facility; dod, Commercial, Or Municipal Waterfront Reinforced Concrete Pier. ensure That The Project Description Clearly Identifies Whether The Project Is New Construction Or Repair/renovation, Addresses How The Project Meets The Scope And Complexity Requirements As Delineated Above, And Provides The Final Construction Cost. please Note That If You Are Responding As An 8(a) Mentor-protégé, You Must Indicate The Percentage Of Work To Be Performed By The Protégé. a Copy Of The Sba Letter Stating That Your 8(a) Mentor-protégé Agreement Has Been Approved Would Be Required With Your Proposal, If Requested. this Notice Is A Market Research Tool Being Used To Determine The Availability And Adequacy Of Potential Small Business Sources Prior To Determining The Method Of Acquisition And Ultimate Issuance Of A Solicitation. upon Review Of Industry Response To This Sources Sought Notice, The Government Will Determine Whether Set-aside Procurement In Lieu Of Full And Open Competition Is In The Government’s Best Interest. Large Business Submittals Will Not Be Considered. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Notice. the Information Provided In This Notice Is Subject To Change And In No Way Binds The Government To Solicit For Or Award A Contract. The Government Will Not Provide Debriefs On The Results Of This Research, But Feedback Regarding The Decision To Set Aside Or Not Set Aside The Procurement Will Be Accomplished Via Pre-solicitation Synopsis Or Solicitation For These Services, As Applicable. all Information Submitted Will Be Held In A Confidential Manner And Will Only Be Used For The Purpose Intended. Points Of Contact Listed May Be Contacted For The Purpose Of Verifying Performance. responses Are Due Nlt 01 Nov 2024, 2:00 Pm Est. the Package Shall Be Sent Via Electronic Mail To Scott Schulz At Scott.c.schulz.civ@us.navy.mil. attachments Are Limited To A Total Of 5mb.
National Irrigation Administration Tender
Civil And Construction...+1Irrigation Work
Philippines
Closing Date18 Nov 2024
Tender AmountPHP 24.2 Million (USD 418.2 K)
Details: Description Section I. Invitation To Bid Invitation To Bid For Construction Of Canalization And Canal Structures For Denoman Sip The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-sip2025-002 (infra) Project Name : Denoman Sip Contract Location : Pres. M.a. Roxas, Zamboanga Del Norte Scope Of Works : Construction Of Canalization And Canal Structures (sta. 0 + 465 To Sta. 2 + 466) Main Canal (sta. 0 + 000 To 1 + 058.71) Lat. A Approved Budget For The Contract (abc) : Php 24,227,887.60 Contract Duration : 180 Calendar Days Amount Of Bidding Documents : Php 25,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : October 28 – November 18, 2024 At 8:30 Am Pre-bid Conference : November 6, 2024 At 9:00 Am Submission Of Bids : November 18, 2024 At 8:30 Am Opening Of Bids : November 18, 2024 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting October 28 – November 18, 2024. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 06 November 2024 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 18 November 2024 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/sqf-zgkx-cco Opening Of Bids : Https://meet.google.com/how-xwth-zwc Any Requests For Additional Information Concerning This Bidding Shall Be Directed To The Following: Marietta M. Cortes Bac Secretariat Head, Nia-regional Office Regional Center Ix, Balintawak, Pagadian City, Zambo. Sur Niaregion9bac@gmail.com 09630884373 – Office Number Date Posted: August 1, 2024 (sgd) Antonio B. Gujeling Bac Chairperson 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation & Flood Control To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Irrigation Structures. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Backhoe 0.45-1 Cu.m 2 Dumptruck 10 Cu.m 2 Concrete Mixer 1 – Bagger 2 Water Pump 4” Ø 2 Concrete Vibrator 5 Hp 2 Plate Compactor 5 Hp 1 Survey Instrument 1 Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Backhoe 0.45-1 Cu.m 1 Dumptruck 10 Cu.m 1 Survey Instrument 1 The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit A. Canalization And Canal Structures Common Excavation (mechanized) 3,610.62 Cu.m Common Backfill (mechanized) 3,715.31 Cu.m Gravel Bedding 419.15 Cu.m Structure Excavation (mechanized) 688.79 Cu.m Structure Backfill (mechanized) 673.67 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 34,628.28 Kg Class A Concrete, 20.76 Mpa 243.94 Cu.m Class B Concrete, 16.56 Mpa 573.49 Cu.m Supply & Delivery Of 24” X 9.5mm Dia. Steel Pipe W/ Accessories & Fittings 10 Cu.m Installation Of 24” X 9.5mm Dia. Steel Pipe W/ Accessories & Fittings 10 Cu.m Cofferdamming & Care Of River 1 Ls B. Project Billboard 1 Ls C. Temporary Works, Mobilization And Demobilization 1 Ls D. Occupational Construction Safety And Health Program 1 Ls
National Irrigation Administration Tender
Civil And Construction...+1Irrigation Work
Philippines
Closing Date18 Nov 2024
Tender AmountPHP 19.1 Million (USD 330.4 K)
Details: Description Section I. Invitation To Bid Invitation To Bid For Construction Of Canalization And Canal Structures For Baliguian Sip The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-sip2025-003 (infra) Project Name : Baliguian Sip Contract Location : Baliguian, Zamboanga Del Norte Scope Of Works : Construction Of Canalization And Canal Structures (sta. 0+752 To Sta 3+100) Approved Budget For The Contract (abc) : Php 19,141,773.60 Contract Duration : 180 Calendar Days Amount Of Bidding Documents : Php 25,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : October 28 – November 18, 2024 At 8:30 Am Pre-bid Conference : November 6, 2024 At 9:00 Am Submission Of Bids : November 18, 2024 At 8:30 Am Opening Of Bids : November 18, 2024 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting October 28 – November 18, 2024. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 06 November 2024 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 18 November 2024 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/sqf-zgkx-cco Opening Of Bids : Https://meet.google.com/how-xwth-zwc Any Requests For Additional Information Concerning This Bidding Shall Be Directed To The Following: Marietta M. Cortes Bac Secretariat Head, Nia-regional Office Regional Center Ix, Balintawak, Pagadian City, Zambo. Sur Niaregion9bac@gmail.com 09630884373 – Office Number Date Posted: August 1, 2024 (sgd) Antonio B. Gujeling Bac Chairperson 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation & Flood Control To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Irrigation Structures. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Backhoe 0.45-1 Cu.m 2 Dumptruck 10 Cu.m 2 Concrete Mixer 1 – Bagger 2 Water Pump 4” Ø 2 Concrete Vibrator 5 Hp 2 Plate Compactor 5 Hp 1 Survey Instrument 1 Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Backhoe 0.45-1 Cu.m 1 Dumptruck 10 Cu.m 1 Survey Instrument 1 The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit A. Canalization Common Excavation (mechanized) 4,635.72 Cu.m Common Backfill (mechanized) 1,641 Cu.m Gravel Bedding 254.79 Cu.m Class B Concrete, 16.56 Mpa 391.34 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 13,639.38 Kg B. Canal Structures Structure Excavation (mechanized) 344.80 Cu.m Structure Backfill (mechanized) 235.32 Cu.m Reinforcing Steel Bars, All Sizes (supply, Delivery & Installation) 14,787.64 Kg Class A Concrete, 20.76 Mpa 246.19 Cu.m Gravel Bedding 14.63 Cu.m C. Project Billboard 1 Ls D. Temporary Works, Mobilization And Demobilization 1 Ls E. Occupational Construction Safety And Health Program 1 Ls
6651-6660 of 6688 active Tenders