Ppe Kit Tenders

Ppe Kit Tenders

City Government Iligan Tender

Civil And Construction...+1Building Construction
Philippines
Closing Date29 Oct 2024
Tender AmountPHP 1.3 Million (USD 22.9 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 1 Cy 2024, Intend To Apply The Sum Of P 1,330,974.72 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Comfort Rooms At Esplanade, Night Market Etc. (completion Of Comfort Rooms At Esplanade) Brgy. Santiago, Iligan City With Project No. Cb(b)-24-107 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Comfort Rooms At Esplanade, Night Market Etc. (completion Of Comfort Rooms At Esplanade) Brgy. Santiago, Iligan City 1.) General Requirements •installation Of Project Billboards - 2 Sets •occupational Safety And Health Program •mobilization And Demobilization 2.) Container Units (2 Units) A.) Installation Of 6m X 3m Container Unit •20 Ft. Container Comfort Rooms ( 5.95m L X 3m W X 2.8m H) Unit Includes: •basic C - Channel Steel Frames •1 Set Solid Core Door, D1 •3/4" Mgo Boards Flooring •2"styrofoam Walls And Roof Insulation W/ Powder Coated Double G.i Sheet •5 Units Toilet & Bath, 1.20m X 1.20m (includes: Toilet, Sink, Ceramic Tile Flooring) •3 Units Urinal W/ Partitions •tiling Works (18 Sq.m) •8 Sets Recessed Downlight Led Round Type 7w Daylight •6 Sets Single Gang Switch W/ Led Set 10a, 230v •2 Sets Two Gang Switch W/ Led Set 10a, 230v B.) Installation Of 3m X 3m Container Unit •10 Ft. Container Office (3m L X 3m W X 2.8m H), Unit Includes: •1 Set Aluminum Frame Sliding Windows (1.20m X 3m) •1 Set Wooden Panel Door, D3 •3/4"mgo Boards Flooring •1 Set Wooden Panel Door, D3 •2"styrofoam Walls And Roof Insulation W/ Powder Coated Double Sided G.i. Sheet •1 Set Recessed Downlight Led Round Type 12w Daylight •2 Sets Duplex Convenience Outlet Vinyl Tiles 60cm X 60 Cm (a = 9 Sq.m) Acrylic Floor Adhesive 3.) Steel Works •installation Of 150 Mm X 50 Mm X 1.20mm Thk. Rectangular Tube, 100 Mm X 50 Mm X 1.20mm Thk. Rectangular Tube, 50 Mm X 50 Mm X 1.20 Mm Thk. Square Tube, 12 Mm X 12 Mm Square Bars. For Facade (refer To Plan) 4.) Electrical Works •installation Of Electrical Panelboard And Circuit Breakers In The Office Room •installation Of Electrical Conduits, Utility Box •installation Of Electrical Wirings ,switches , Convenience Outlet And Lighting Fixtures •termination Of Wirings In The Electrical Panelboard •installation Of Service Entrance Conduit , Cap, And Secondary Rack •check And Inspect Every Branch Circuit By Using Multitester. •prepare The Electrical System For Energization. 5.) Paintworks •paint Works & Finishes For All Wallings 6.) Tinsmithry •installation Of 0.5mm Thk. Long-span Rib Type •installation Of 100 Mmx 50mmx 6m X 1.2 Mm Thk. Rectangular Tube For Steel Girt, Trusses, Purlins (powder Coated) 7.) Pump Assembly •installation Of 2 Hp Horizontal Water Pump Set Specs: Power: 2 Hp Total Suction Lift Vertical Lift Inlet Diameter Flowrate Maximum Pressure I. Construction Safety And Health Program (q = 1.00 Lumpsum) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Ii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 3"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iii. Mobilization & Demobilization (q = 1.00 Lot) Iv. Container Units (q = 1.00 Lumpsum) Includes 1.) 20 Ft. Container Comfort Rooms ( 5.95m L X 3m W X 2.8m H) Unit Includes: Basic C - Channel Steel Frames; 1set Solid Core Door, D1; 3/4" Mgo Boards Flooring; 2"styrofoam Walls And Roof Insulation W/ Powder Coated Double G.i Sheet; 5 Units Toilet & Bath, 1.20m X 1.20m (includes: Toilet, Sink, Ceramic Tile Flooring); 3 Units Urinal W/ Partitions; Tiling Works A= 18 Sqm; 8 Sets Recessed Downlight Led Round Type 7w Daylight; 6 Sets Single Gang Switch W/ Led Set 10a, 230v; 2 Sets Two Gang Switch W/ Led Set 10a, 230v; 2.) 10 Ft. Container Office (3m L X 3m W X 2.sm H), Unit Includes: 1set Aluminum Frame Sliding Windows (1.20m X 3m); 1set Wooden Panel Door, D3; 3/4"mgo Boards Flooring; 2"styrofoam Walls And Roof Insulation W/ Powder Coated Double Sided G.i. Sheet; 1set Recessed Downlight Led Round Type 12w Daylight; 2 Sets Duplex Convenience Outlet; Vinyl Tiles 60cm X 60 Cm (a = 9 Sq.m); Acrylic Floor Adhesive V.pump Assembly (q = 1.00 Lot) Includes Horizontal Water Pump, Specs: Power (2hp), Total Suction Lift: (26.2 Ft.), Vertical Lift: (17 Ft.), Inlet Diameter (1- 1/4 "),outlet Diameter (1"), Flowrate (39.6 Gpm), Maximum Pressure (68 Psi); 1" Dia. X 6m Gi Pipe Sch 40; 1-1/4"' Dia. X 6m Gi Pipe Sch 80; 2" Dia. X 6m Gi Pipe Sch 80; Gi Pipe Reducer, 2" To 1-1/4" Dia.; Gi Pipe 90 Deg Coupling, 1" Dia.; Well Seal, 1-1/4" Dia.; Priming Tee And Plug, 1" Dia.; Priming Tee And Plug, 1-1/4" Dia.; Stainless Clamps, 1-1/4" Dia.; Stainless Clamps, 1" Dia.; Check Valve, 1-1/4" Dia.; Foot Valve; Pump Strainer Vi. Steel Works (q = 1,310.73 Kgs.) Includes 150mmx50mmx6mx 1.20mm Thk. Rectangular Tube, 100mmx50mmx6mx 1.20mm Thk. Rectangular Tube, 50mmx50mmx6mx 1.20mm Thk. Square Tube, 38mmx38mmx6mx 1.20mm Thk. Square Tube, 38mmx5mmx6m Flat Bars, 12mmx12mmx6mx Square Tube, Steel Deck (1.0mm) (to Order Cutlists), Welding Rods E-6011, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper, 50 Mm X 50 Mm X 6 Mm Angle Bar (for Platform), 50 Mm X 6mm Flat Bar (for Platform). Vi. Electrical Works (q = 1.00 Lot) Includes Electric Wire , 2.0mm2( #14awg) Thhn Stranded Copper Wire; Electric Wire I 3.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire I 5.5mm2( #10awg) Thhn Stranded Copper Wire; Electric Wire, 8.0mm2( #8awg) Thhn Stranded Copper Wire; Switch , 1gang Switch W/led Set 10a 220v; Switch ,2 Gang Switch W/led Set 10a 220v; Led Round Recessed Pin Light Housing W/ Beehive Reflector W/ Glass Cover, E27 Fixture; Ceiling Receptacle 4"dia.; Led Bulb,7w,6651m,ac 110-240v,e-27;led Bulb, 9w, 8551m, Ac 110-240v,e-27; Led Bulb,12w, 12001m,ac 110-240v,e-27; T8 Led Tube Light,18w,43x1220x31mm,gl3,single-ended W/ Fixture; Duplex Convenience Outlet; Weatherproof Cover For Switch & Outlets,2-gang,wpp-603, 0mni; Aircon Outlet, 20a; Electrical Tape 3/4" X20yds; Pvc Conduit Pipe , 1/2x3 Meters; Pvc Conduit Coupling (1/2)dia.; Pvc Conduit Elbow 90deg (1/2)dia.; Pvc Clamp 1/2mm (100pc/pack); Pvc Adaptor With Locknut 1/2; Junction Box, Pvc Octagonal W/ Cover 2"x4" Depth Type; Electrical Panelboard 6 Holes Plug In Type; Circuit Breaker 2 Pole 15at ,230v Plugin Type; Orcuit Breaker 2 Pole 20at, 230v Plugin Type; Circuit Breaker 2 Pole 50at, 230v Plugin Type; Utility Box 2"x3" Depth Type. Viii. Paint Works (q = 180.00 Sq.m.) Includes Red Oxide Metal Primer, Primer For Interior, Topcoat, Thinning Solvent For Primer And Topcoat, Tray Paint, Paint Brush 2", Putty (full), Sand Paper, Thinning Solvent For Putty. Ix. Tinsmithry (q = 51.11 Sq.m.) Includes 0.5 Mm Thk. Colored Roof Long Span Rib Type; 100mmx50mmx6mxl.2mm Thk. Rectangular Tube For Steel Girt,trusses, Purlins (powder Coated); Sealant; Tekscrew; Aviation Metal Snip Scissor. Approved Budget For The Contract (abc): P 1,330,974.72 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within Fifty (50) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: October 8 –29, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference: October 15, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: October 29, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: October 29, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 8, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-107 (ceo-infra)

City Government Iligan Tender

Civil And Construction...+1Building Construction
Philippines
Closing Date17 Dec 2024
Tender AmountPHP 1.3 Million (USD 22.3 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Gen Fund-20% / Dev. Fund, Intend To Apply The Sum Of P 1,304,217.11 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Completion Of Eedmo Building At General Aguinaldo Street, Brgy.poblacion, Iligan City With Project No. Cb(b)-24-145 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Completion Of Eedmo Building At General Aguinaldo Street, Brgy.poblacion, Iligan City General Requirements • Permits & Clearances • Installation Of Project Billboard,2 Sets; • Occupational Safety & Health Program Demolition & Removal Works • Demolition Of Existing Concrete Structures (slab On Grade) Portion Only; • Removal Of Existing Chb Wall At Ground Floor (portion Only}; Earthworks • Excavation Tor Column-footing & Wall-footing; (refer To Plan) Concrete Works, Forms & Scaffoldings • Concrete Pouring Tor Foundation, Columns (for Additional) & Wall-footing (foundation); Plumbing Works • Installation Of Plumbing Fixtures Such As Water Closet,lavatory,stainless Floor Drain,faucet & Kitchen Sink Including Pvc Pipes & G.i Pipe W/ Complete Fittings At 3rd Floor; Steel Reinforcement • Using 10mmø & 16mmø Deformed Steel Bars W/#16 G.i Tie Wire Skim Coat • Skim Coating Only For All Wallings And Columns From Ground Floor To 3rd Floor ; Doors & Windows • Installation Of Pre-fab Wooden Panel Door W/ Complete Accessories & Aluminum Glass Door At 3rd Floor; • Installation Of Fixed, Sliding & Awning Glass Window On Aluminum Frame W/ Complete Accessories At 3rd Floor; Electrical Works • Installation Of Electrical Wirings, Connection W/ Complete & Fixtures At 3rd Floor; Ceiling Works • Installation Of 4' X 8' X 3.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/ Complete Accessories At 3rd Floor; Plumbing Works • Installation Of Plumbing Fixtures Such As Water Closet, Lavatory , Stainless Floor Drain, Stainless Wall Faucet & Stainless Kitchen Sink At 3rd Floor; • Installation Of Stainless P-trap For Lavatory & Stainless Floor Drain At 3rd Floor; Masonry Works • Installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Walling At Ground Floor & 3rd Floor; • Using 10mmø X 6m Deformed Steel Bars W/ #16 G.i. Tie Wire; And Vertical Spaced @ 600mm O.c. & For Horizontal, Every @ 3rd Layer; I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)- 6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aid Kit & Medicine. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8" Coco Lumber, 2"x 2"x10" Coco Lumber, 2"x 2"x 14" Coco Lumber, Assorted Sizes C.w. Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Demolition & Removal Works (q = 1.00 Lot ) Includes Existing Concrete Structures & Chb Wall (portion Only). Vi. Earthworks (q = 2.89 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled/re-use. Vii. Econcrete Works, Formworks And Scaffoldings (q = 1.75 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel,4' X 8' X 1/2" Thk. Ordinary Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w. Nails. Viii. Masonry Works (q = 123.26 Sq.m.) Includes 4''x 8"x 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i. Tie Wire. Ix. Steel Reinforcements (q = 202.48 Kgs.) Includes 10mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i. Tie Wire. X. Skim Coat (q = 1,302.76 Sq.m.) Includes Skim Coat, Sand Paper. Xi. Ceiling Works (q = 178.28 Sq.m.) Includes 4' X 8' X 3.5mm Thk. Fcb, 19mm X 550mm X 0.5mm Thk. X 5m Double Furring, W-clip, Blind Rivets (1000 Pc/box), 1" X 3mm Screw, Concrete Nails, Aviation Metal Snip Scissor, Riveter. Xii. Doors & Windows (q = 19.00 Set/s) Includes D1: 8-panels, 1850mm X 2400mm Aluminum Push & Pull Glass Dorr W/ Fixed & W/ Complete Accessories; D2: 1000mm X 2100mm Pre-fab Wooden Panel Door W/ Complete Accessories (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D3: 850mm X 2400mm Pre-fab Wooden Panel Door W/ Complete Accessories (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D4: 750mm X 2100mm Flush Door W/ Complete Accessories (2" X 6" Door Jamb, Kiln Dried, 3 Sets Steel Hinges & Heavy Duty Door Knob); W1: 15-panels, 4100mm X 3000mm Fixed Glass Window W/ Complete Accessories On Aluminum Frame;w2: 12-panels, 3150mm X 2400mm Fixed Glass Window W/ Sliding Window On Aluminum Frame W/ Complete Accessories (flush Lock - Heavy Duty); W3: 4-panel, 1600mm X 1500mm Sliding W/ Fixed Glass Window On Aluminum Frame W/ Complete Accessories (flush Lock - Heavy Duty); W4: 2-panels, 1600mm X 600mm Sliding W/ Fixed Glass Window On Aluminum Frame W/ Complete Accessories (flush Lock - Heavy Duty);ws: 1-panel, 600mm X 600mm Awning Glass Window On Aluminum Frame W/ Complete Accessories (2pcs. Stainless Hinges & Heavy Duty Cam Handle Lock). Xiii. Electrical Works (q = 1.00 Lot) Includes Electric Wire, 2.0mm2 (#14 Awg) Thhn Stranded Copper Wire; Electric Wire, 3.5mm2 (#12 Awg) Thhn Stranded Copper Wire; Electric Wire, 8.0mm2 (#8 Awg) Thhn Stranded Copper Wire; Wire, 30.0mm2 (#2 Awg) Thhn Stranded Copper Wire; Switch, 1gang Switch W/ Led Set 10a, 220v; Switch, 2 Gang Switch W/ Led Set 10a, 220v; Switch, 3 Gang Switch W/ Led Set 10a, 220v; Downlight Led Round 1ype 12w Daylight;duplex Convenience Outlet; Electrical Tape 3/4" X 20 Yds.; Pvc Conduit Pipe, 1/2 X 3 Meters; Pvc Conduit Coupling (1/2) Dia.; Pvc Conduit Elbow 90 Deg. (1/2 Dia.); Pvc Clamp 1/2mm (100pc/pack); Pvc Adaptor With Locknut 1/2; Junction Box, Pvc Octagonal W/ Cover 2" X 4" Depth Type; Electrical Panelboard 6 Branches + 1main Bolt On Type; Circuit Breaker 2 Pole 15at,230v Bolt On Type; Circuit Breaker 2 Pole 20at, 230v Bolt On Type; Circuit Breaker 2 Pole 60at, 230v Bolt On Type; Moulded Case Circuit Breaker 2 Pole 100at, 230v Plug-in Type (main); Utility Box 2"x3"depth Type. Xiv. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Sanitary Wye, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg); 4" Dia. Pvc Elbow 1/8 Bend (45 Deg); 4" Dia. Pvc Clean Out W/ Adaptor & Plug; 4" X 2" Dia. Pvc Coupling Recuder; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 311 Dia. Pvc Wye, S-1000; 3" Dia. Pvc Clean Out W/ Adaptor & Plug; 3" Dia. Pvc P-trap; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Dia. G.i. Threaded Pipe Elbow. 90 Deg.; 1/2" Dia. G.i.threaded Pipe Elbow. 45 Deg.; 1/2" Dia. G.i. Threaded Pipe Tee; Stainless P-trap (for Lavatory & Kitchen Sink); 4" X 4" Stainless Floor Drain; Water Closet W/ Complete Fittings/accessories Heavy Duty;lavatory-heavy Duty; Stainless Water Faucet W/ Complete Accessories-heavy Duty; Lavatory-heavy Duty; Stainless Water Faucet W/ Complete Accessories-heavy Duty; Stainless Kitchen Sink; Teflon Tape, 1/4" X 10m. Approved Budget For The Contract (abc): P 1,304,217.11 Required Bid Security:2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within Ninety (90) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: November 26 – December 17, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2. Pre-bid Conference: December 3, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: December 17, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: December 17, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 26, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-145 (ceo-infra)

City Government Iligan Tender

Civil And Construction...+1Building Construction
Philippines
Closing Date26 Nov 2024
Tender AmountPHP 4.8 Million (USD 81.7 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Special Educational Fund Intend To Apply The Sum Of P 4,830,913.32 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Three-storey Guidance And Counselling Building, Iligan City National High School (icnhs), Brgy. Mahayahay, Iligan City With Project No. Cb(b)-24-130 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Three-storey Guidance And Counselling Building, Iligan City National High School (icnhs), Brgy. Mahayahay, Iligan City •general Requirements -pennits & Clearances; -installation Of Project Billboard,2 Sets; -occupational Safety & Health Program; •clearing & Grubbing -cutting Of Trees; •earthworks -excavation For Foundation, Tie Beam, Wall-footing , Zocalo, Septic Vault, Concrete Storage, Stairs Foundation & Grease Trap; -backfilling & Compaction For The Slab On Grade; -gravel Bedding For Foundation , Tie Beam, Wall-footing , Slab On Grade, Zocalo, Septic Vault , Concrete Storage, Stairs Foundation & Catch Basin; •concrete Works, Forms & Scaffoldings -concrete Pouring For Foundation , Columns, Tie Beam, 2nd & 3rd Floor Beams, Suspended Slab, Roof Beams , Cantilever Beams, Slab On Grade, Wall-footing (foundation) , Zocalo (foundation) , Septic Vault Flooring (top & Bottom), Concrete Storage (foundation), & Catch Basin Flooring; •masonry Works -installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor, Balcony (2nd Floor) , Parapet,wall-footing ,septic Vault, Catch Basin, Concrete Storage & Zocalo, W/plaster Finish,& Smooth On Expose Areas; -using 10mmø X 6m Deformed Steel Bars Wf#.16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @3rd Layer; •steel Reinforcement -using 10mmø, 12mmø, 16mmø & 20mmø Deformed Steel Bars Wf#.16 G.i Tie Wire; •paint Works & Finishes; -skim Coating Only For All Wallings At Ground Floor Only; •steel Works -fabrication & Installation Of 50mm X 50mm X 6mm Thk., 38mm X 38mm X 6mm Thk., 38mm X 38mm X 4.smm Thk ., 25mm X 25mm X 4.smm Thk., 25mm X 25mm X 2mm Thk. Angle Bar,25mm X 25mm X 3/16" Thk. Angle Bar, 25mm X 3/16" Thk. Flat Bar. 2" X 4" X 1.smm Thk. C-purtins W/ 10mmø Dsb Sagrods, 12mmø Turnbuckle & Cross Brace; 10mmø Anchor Bolt,epoxy Primer; -installation Of Stainless Steel Square Tube Railings- Grade 304 For Stairs & Balcony; •tinsmithry Works -installation Of 0.4mm Thk. Colored Roof Long-span Rib Type,0.4mm Thk. Pre-fab End Flashing, 0.4mm Thk. Pre-fab Fascia Cover,& 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type W/complete Accessories ; •electrical Works ; -electrical Works At Ground Floor, & Provisions; •plumbing Works; -installation Of Plumbing Fixtures At Ground Floor Only; -installation Of 3"ø Pvc Pipe For Downspout W/ G.i Basket Strainer, Pvc Pipe Clip W/complete Accessories ; -provision Of Pvc & G.i Pipes For 2nd Floor & 3rd Floor Fixtures; I. Permits And Clearance (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv.mobilization & Demobilization (q = 1.00 Lot) V.clearing And Grubbing (q = 1.00 Lot) Vi. Earthworks (q = 147.48 Cu.m) Includes Volume To Be Excavated, Volume To Be Backfilled, Pit Run Soil/earthfill (backfilling Suitable Materials), Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 75.99 Cu.m) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 284.81 Sq.m) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix.steel Reinforcements (q = 16,429.80 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, 20mm Dia. X 6m Dsb, #16 G.i Tie Wire. X.steel Works (q = 2,034.40 Kg/s) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 16pcs, 38mm X 38mm X 6m X 4.smm Thk. Angle Bar- 20pcs, 38mm X 38mm X 6m X 6mm Thk. Angle Bar- 23pcs, 25mm X 25mm X 6m X 4.5mm Thk. Angle Bar- 24pcs, 25mm X 25mm X 6m X 2.0mm Thk. Angle Bar- 7pcs, 1" X 1" X 6m X 3/16" Thk. Angle Bar- 4pcs, 25mm X 6m X 3/16" Thk. Flat Bar- 3pcs, 50mm X 100mm X 6m X 1.5mm Thk. C-purlins- 20pcs, 12mmø X 6mm Plain Bar Cross Brace- 8pcs, 12mmø Turnbuckle, Sagrods-10mmø X 6mm Dsb- 18pcs, 10mmø Anchor Bolt (l-type), Welding Rod (6011), 2" X 3" X 6m X 1.0mm Thk. Stainless Steel Rectangular Tube- Grade 304, 2" X 2" X 6m X 1.0mm Thk. Stainless Steel Rectangular Tube- Grade 304, Stainless Welding Rod (1.60mm), Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi.tinsmithry (q = 80.73 Sq.m) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored End Flashing (0.4mm Thk. X 8'), 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes (q = 388.99 Sq.m) Includes Skim Coat, Sand Paper. Xiii. Electrical Works (q = 1.00 Lot) Includes 2.0mm2 Thhn Stranded Copper Wire, 3.5mm2 Thhn Stranded Copper Wire, 8.0mm2 Thhn Stranded Copper Wire, 14.0mm2 Thhn Stranded Copper Wire, 38.0mm2 Thhn Stranded Copper Wire, Pvc Conduit 15mm, Pvc Elbow 15mm, Junction Box 4x4", Utility Box 2x4", Pvc Conduit 20mm, Pvc Elbow 20mm, Emt Conduit 32mm, Emt Coupling 32mm, Service Entrance Cap 32mm, Secondary Rack With 2 Spool, Duplex Convenience Outlet, Airconditioning Outlet, Single Gang Switch With Led Indicator 230v, Two Gang Switch With Led Indicator 230v, Three Gang Switch With Led Indicator 230v, Single Gang Three Way Switch With Led Indicator 230v, Led Panel Light Recessed Round Type 18w (230v), Led Panel Light 30x60 24w (230v Daylight), Led Panel Light 30x30 18w (230v), Circuit Breaker 2 Pole 15at (230v Plug In Type), Circuit Breaker 2 Pole 20at (230v Plug In Type), Circuit Breaker 2 Pole 60at (230v Plug In Type), Electrical Panelboard 10 Holes 8 Branches Plug In Type, Mccb 125 At 2 Pole 230v, Enclosure For 125 At Mccb, Solvent Cement 100cc, Minor Electrical Peripherals. Xiv. Plumbing Works (q = 1.00 Lot) Includes 6" Dia. X 10' Pvc Pipe S-1000, 4" Dia. X 10' Pvc Pipe S-1000, 4" Dia. Pvc Sanitary Tee (s-1000), 4" Dia. Pvc Elbow 1/4 Bend (90 Deg.), 4" Dia. Pvc Elbow 1/8 Bend (45 Deg.), 4" Dia. Pvc Coupling, 4" Dia. Pvc Clean Out W/adapter & Plug, 4" X 2" Dia. Pvc Coupling Reducer, 4" Dia. Pvc Cross Tee, 3" Dia. X 10' Pvc Pipe S-1000, 3" Dia. Pvc Elbow 1/4 Bend (90 Deg.), 3" X 2" Dia. Pvc Coupling Reducer, 3" X 2" Dia. Pvc Wye, 3" Dia. Pvc Elbow 1/8 Bend (45 Deg .), 3" Dia. Pvc Clean Out W/adapter & Plug, 3" Dia. Pvc Sanitary Tee (s-1000), Pvc Pipe Strap/clip, Bolt (54pcs), Nut (54pcs) And Washer (54pcs), 2" Dia. X 10' Pvc Pipe S-1000, 2" Dia. Pvc Tee, 2" Dia. Pvc P-trap, 2" Dia. Stainless P Trap, 2" Dia. Pvc Elbow 1/4 Bend (90 Deg.), Pvc Cement (400cc), 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line, 1/2" Diam. G.i Threaded Pipe Elbow (90deg.), 1/2" Diam. G.i Threaded Pipe Tee, 1/2" Diam. G.i Threaded Union Patente, G.i Basket Strainer, 4" X 4" Stainless Floor Drain, Water Closet W/complete Fittings/accessories-heavy Duty, Lavatory -heavy Duty, Faucet W/complete Accessories-heavy Duty, Teflon Tape (3/4" X 10m). Approved Budget For The Contract (abc): P 4,830,913.32 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Eighty (180) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: November 5 – November 26, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 12, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 5, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-130 (ceo-infra)

City Government Iligan Tender

Finance And Insurance Sectors
Philippines
Closing Date23 Jul 2024
Tender AmountPHP 2.3 Million (USD 40 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Gen Fund-20% / Dev. Fund, Intend To Apply The Sum Of P 2,336,021.71 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Meat Inspection Quarters, Slaughter House Compound, Merila, Brgy. Ubaldo Laya, Iligan City With Project No. Cb(b)-24-068 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Meat Inspection Quarters, Slaughter House Compound, Merila, Brgy. Ubaldo Laya, Iligan City Scope Of Work: General Requirements: • Installation Of Project Billboard • Occupational Safety And Health Program • Mobilization And Demobilization Earthworks •76.35 Cu.m. Total To Be Excavated, Backfilled And Gravel Bedding,1-1/2" Ø Concrete Works, Formworks And Scaffoldings •21.53 Cu.m.total Of Concrete Works, Formworks & Scaffoldings For Foundation, Floor,smooth Finishing,columns, Slab On Grade, Wall-footing (foundation), Zocalo, Catch Basin Flooring (top & Bottom), & Septic Vault Flooring (top & Bottom); Cutting/bending,installation/fastening Of Rebars Masonry Works •188.88 Sq.m. Total Of Masonry Using 4" X 8" X 16" Concrete Hollow Blocks For Wallings, Wall-footing, Catch Basin, Septic Vault W/ Plaster Finish, Smooth On Expose Areas. Steel Reinforcements •total Of 1657.46 Kg Steel Reinforcement Using 10mm¢, 12mm¢ & 16mm¢ Dsb W/ #16 G.itie Wire Tile Works •total Area Of 6.48 Sq.m Installation Of 600mm X 600mm Non Skid Ceramic Tiles And Pvc Tile Trim For Comfort Room. Ceiling Works •total Area Of 139.91sq.m For Installation Of 4' X 8' X 4.smm Thk. Fcb, 19mm X 50mm X 0.4mm Thk. X 5m Double Furring, Blind Rivets, Concrete Nails And Riveter Paint Works & Finishes •a Total Of 464.15 Sq.m.of Skim Coat, Flat Latex Primer, Red Lead Paint For Steel Works, Baby Roller #4 Mini, Tray Paint, Paint Brush, 2", And Sand Paper For Finishes. Doors & Windows •d1:(5-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 1000mm X 2100mm •d2: (1-panel) Wooden Flush Door On 2" X 6" Wooden Door Jamb W/ Complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 800mm X 2100mm •d3: (1-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm •d4 (1-panel) Flush Door On 2" X 611 Wooden Door Jamb W/complete 'accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm •w1: (3-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On Bothsides On 50mm X 100mm Analok Frame W/complete Accessories (2pcs Of Heavy Duty Flush Lock) - 2500mm X 1200mm •w2: (2-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On 50mm X 100mm Analok Frame W/complete Accessories (1pc Of Heavy Duty Flush Lock)- 1700mm X 1200mm •w3: (1-panels) Awning Window W/ 6mm Thk . Bronze Glass On Upvc Frame W/complete Accessories (2pcs Of Steel Hinge & 1pcs Of Cam Handle Lock - 600mm X 600mm Plumbing Works •installation Of Water Pipe And Waste Pipe •installation Of Faucet And Sink Steel Works •a Total Of 268.07 Sq.m Installation Of 50mm X 50mm X 6m X 6mm Thk. Angle Bar, 38mm X 38mm X 6m X 4.mm Thk. Angle Bar, 25mm X 25mm X 4mm Angle Bar, 25mm X 25mm X 4mm Flat Bar Flat Bar, 2" X 3" X 6m X 1.2mm Thk. C-purlins And Epoxy Primer For All Steel Works. Tinsmithry •a Total Of 144.94 Sq.m. For Installation Of 0.40mm Thk. Pre-painted G.i. Rib-type Roofing, 0.40mm Thk. Plain Pre-fab G.i Sheet Ridge Roll, 0.40mm Thick G.i. Sht. Pre-fab Gutier,1.40mm Thk Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets, Riveter And Aviation Metal Snip Scissor For The Tinsmithry Work . I. Permits & Clearances (q = 1.00 Lumpsum) Includes Fire Fee, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plan. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2" X 2"x 8' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Earthworks (q = 70.35 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled, Gravel Bedding (1-1/2" Ø). Vi.concrete Works, Formworks And Scaffoldings (q = 21.64 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 3" X 10' Sized Coco Lumber, Assorted Sized C.w Nails. Vii. Masonry Works (q = 191.73 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand. Viii. Steel Reinforcements (q = 1,657.46 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Tile Works (q = 6.48 Sq.m.) Includes 600mm X 600mm Non Skid Ceramic Tiles (a = 6.48 Sq.m), Tile Adhesive (heavy Duty), Tile Grout, Portland Cement, Washed Sand, Pvc Tile Trim (6mm X 2.40m), 4" Ø Cutting Disc. X. Ceiling Works (q = 139.91 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb (a = 139.9125 Sq.m), 19mm X 50mm X 0.4mm Thk. X 5m Double Furring, Blind Rivets (1000pcs/box), Concrete Nails. Xi. Steel Works (q = 268.07 Sq.m.) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 17pcs, 38mm X 38mm X 6m X 4.mm Thk. Angle Bar- 64pcs, 25mm X 25mm X 4mm Angle Bar - 76 Pcs, 25mm X 25mm X 4mm Flat Bar Flat Bar- Spcs, 2" X 3" X 6m X 1.2mm Thk. C-purlins- 41pcs, Welding Rod (6011), Epoxy Primer, Red Lead Paint, 4" Paint Brush, 4" Ø Cutting Disc, 4" Ø Grinding Disc, Assorted Sand Paper. Xi . Tinsmithry (q = 144.95 Sq.m.) Includes 0.40mm Thk. Pre-painted G.i. Rib-type Rooang, 0.40mm Thk. Plain Pre-fab G.i Sheet Ridge Roll, 0.40mm Thk Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Sealant, Teksrew, Blind Rivets (1000pcs/box). Xiii. Paint Works & Finishes (q = 324.24 Sq.m.) Includes Skim Coat (a = 324.24 Sq.m), Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush (2"), Sand Paper. Xiv. Doors 8t Windows (q = 17.00 Set/s) Includes D1: (5-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 1000mm X 2100mm; D2: (1-panel) Wooden Flush Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 800mm X 2100mm; D3: (1-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm; D4: (1-panel) Flush Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy D Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm; W1: (3-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On Bothsides On 50mm X 100mm Analok Frame W/complete Accessories (2pcs Of Heavy Duty Flush Lock) - 2500mm X 1200mm; W2: (2-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On 50mm X 100mm Analok Frame W/complete Accessories (lpc Of Heavy Duty Flush Lock)- 1700mm X 1200mm; W3: (1-panels) Awning Window W/6mm Thk . Bronze Glass On Upvc Frame W/complete Accessories (2pcs Of Steel Hinge & 1pc Of Cam Handle Lock - 600mm X 600mm. Xv.electrical Works (q = 1.00 Lot) Includes Electric Wire ,2.0mm2( #14awg) Thhn Stranded Copper Wire; Electric Wire ,3.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire ,5.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire, 8.0mm2( #sawg) Thhn Stranded Copper Wire; Electric Wire, 14.0mm2 (#sawg) Thhn Stranded Copper Wire; Switch, 1gang Switch W/led Set 10a 220v; Switch, 2 Gang Switch W/led Set 10a 220v; Switch, 3 Gang Switch W/led Set 10a 220v; T8 Batten Type Led Tube 18w Daylight 4ft.; Led Bulb 9w, 230v Daylight; Ceiling Receptacle 4"; Duplex Convenience Outlet; Airconditioning Outlet; Electrical Tape 3/4" X20yds; Pvc Conduit Pipe, 1/2x3 Meters; Pvc Conduit Coupling (1/2)dia. ;pvc Conduit Elbow 90deg {1/2)dia.;pvc Clamp 1/2mm (100pc/pack); Pvc Adaptor With Locknut 1/2; Junction Box, Pvc Octagonal W/ Cover 2"x4" Depth Type; Electrical Panelboard 6 Branches Plugin Type; Circuit Breaker 2 Pole 15at ,230v Plugin Type; Circuit Breaker 2 Pole 20at, 230v Plugin Type; Circuit Breaker 2 Pole 30at, 230v Plugin Type; Circuit Breaker 2 Pole 60at, 230v Plugin Type; Utility Box 2"x3" Depth Type; Emt Pipe (20mm) 1/2x3; Secondary Rack With 2 Spool; Service Entrance Cap 20mm. Xvi. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" Dia. Pvc Coupling; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Sanitary Wye; 3" Dia. Sanitary Tee; 3" X 2" Dia. Sanitary Tee; 3" Dia. Pvc Clean Out W/adapter & Plug; Pipe Strap/clip (for Downspout Pipe); Bolt {100pcs), Nut (100pcs) And Washer (100pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; Gate Valve-heavy Duty; Check Valve­ Heavy Duty; G.i Basket Strainer; 4" X 4" Stainless Floor Drain; Stainless Double Bowl Kitchen Sink/ Faucet & Flexible Hose-heavy Duty; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Faucet, W/flexible Hose-heavy Duty(lavatory); Wall Faucet, W/flexible Hose-heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,336,021.71 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Seven (107) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: July 2– July 23, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference: July 9, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: July 23, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: July 23, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: July 2, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. Cb(b)-24-068 (ceo-infra)

City Government Iligan Tender

Civil And Construction...+1Building Construction
Philippines
Closing Date19 Nov 2024
Tender AmountPHP 2.8 Million (USD 49.1 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund Intend To Apply The Sum Of P 2,898,505.28 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City With Project No. Cb(b)-24-128 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City • General Requirements *permits & Clearances; *installation Of Project Billboard,2 Sets; *occupational Safety & Health Program; • Removal Of Structures, Obstructions, Clearing & Grubbing *existing Concrete Structures; *cutting Of Trees •earthworks *excavation For Foundation ,tie Beam, Zocalo, Catch Basin, Wall-footing & Septic Vault; *backfilling & Compaction For The Slab On Grade; *gravel Bedding For Foundation ,slab On Grade, Tie Beam, Zocalo, Wall-footing, Septic Vault, & Catch Basin; • Concrete Works, Forms & Scaffoldings *concrete Pouring For Foundation, Columns, Tie Beam, Roof Beams, Septic Vault Flooring (top & Bot), Zocalo (foundation), Ramp Flooring , Wall-footing (foundation), Slab On Grade, & Catch Basin Flooring (top & Bot); • Masonry Works *installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor ,wall-footing , Septic Vault, Catch Basin,& Zocalo, W/plaster Finish,& Smooth On Expose Areas; *using 10mmø X 6m Deformed Steel Bars W/#16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @ 3rd Layer; • Steel Reinforcement *using 10mmø, 12mmø,& 16mmø Deformed Steel Bars W/#16 G.i Tie Wire; • Paint Works & Finishes; *skim Coating & Paint Works For All Wallings And Columns At Ground Floor; •tinsmithry Works *installation Of 0.4mm Thk. Colored Root Long-span Rib Type,0.4mm Thk. Pre-fab Flashing Gutter,0.4mm Thk. Pre-fab Fascia Cover, & 0.30m X 2.40m X 0.4mm Thk . Pre-fab Colored Gutter Spanish Type W/complete Accessories; • Ceiling Works *installation Of 4' X 8' X 4.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/complete Accessories ; • Tile Works *installation Of 300mm X 300mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Ceramic Wall Tiles W/pvc Tile Trim & 600mm X 600mm Floor Tiles; • Doors & Windows *installation Of Pre-fab Wooden Panel Door & Flush Door W/complete Accessories; & Aluminum Glass Door; *installation Of Fixed, Sliding & Awning Glass Window On Aluminum Frame W/complete Accessories; • Electrical Works; *installation Of Electrical Wirings , Connections W/complete Accessories & Fixtures; • Plumbing Works *installation Of Pvc Pipes, Fittings & G.i Pipes; *installation Of G.i Basket Strainer, Pipe Strap/clip W/nut & Washer For 3"ø Pipe (downspout); *installation Of Plumbing Fixtures Such As, Water Closet, Lavatory, Stainless Floor Drain, Stainless Wall Faucet, *installation Of Motor Pump, Water Meter, Check Valve, Gate Valve & Stainless Handrail Grab-bar; • Steel Works *fabrication & Installation Of 2" X 6" X 1.20mm Thk. Channel For Steel Trusses & Web Members, 1" X 1" X 4.0mm Thk. Angle Bar & 1" X 3.0mm Thk. Flat Bar For Steel Fascia Frame; *installation Of 2" X 4" X 1.0mm Thk. C-purlins W/ 10mmø Sagrods And Installation Also Of 6mm Thk. Base Plate And Must Be Full Weld On Steel Trusses At The Top Of The Column W/4-10mmø Anchor Bolt W/ Nut & Washer To Be Full Weld On Vertical Bars; *installation Of 1-1/2"ø Stainless Steel Pipe Railings- Grade 304 For Ramp Only; *all Steel Works Must Be Coat With Epoxy Primer; I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)- 6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Removal Of Structures, Obstructions & Clearing & Grubbing (q = 1.00 Lot) Includes Existing Concrete Structures, Cutting Of Trees. Vi. Earthworks (q = 78.01 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled/re-use, Pit Run Soil/earthfill, Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 25.98 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/2" Thk. Ordinary Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 231.21 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Steel Reinforcements (q = 2,720.67 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. X. Steel Works (q = 1,027.28 Kg/s) Includes 2" X 6" X 1.20mm Thk. Channel (rafter/truss) - 32pcs, 1" X 1" X 4.0mm Thk. Angle Bar - 18pcs, 1" X 3.0mm Thk. Flat Bar - 8pcs, 2" X 4" X 1.0mm Thk. C-purlins - 36pcs, Sagrods-10mmø X 6mm Dsb- 6pcs, 1-1/2"ø X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304, 4' X 8' X 6mm Thk. Mild Steel Plate, 10mmø Anchor Bolt (l-type) W/5% Wastage, Welding Rod (6011), Stainless Welding Rod, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi. Tinsmithry ( Q = 127.92 Sq.m.) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored Ridge Roll, 0.4mm Thk. X 8', Pre-fab Colored Flashing Gutter, 0.4mm Thk. X 8', 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes ( Q = 336.30 Sq.m.) Includes Skim Coat, Neutralizer, Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush 2", Sand Paper. Xiii . Ceiling Works (q = 80.00 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb, A = 80.00 Sq.m; 19mm X 50mm X 0.5mm Thk. X 5m Double Furring; W-clip; Blind Rivets (1000pcs/box); 1" X 3mm Screw; 300mm X 300mm Wall Exhaust Fan; Concrete Nails; Aviation Metal Snip Scissor; Riveter. Xiv. Tile Works (q = 107.00 Sq.m.) Includes 600mm X 600mm Ceramic Floor Tiles, A= 76.79 Sq.m; 300mm X 300mm Non Skid Ceramic Floor Tiles, A = 6.81 Sq.m; 300mm X 600mm Ceramic Wall Tiles, A = 23.40 Sq.m; Pvc Tile Trim, 6mm X 2.40m; Tile Adhesive, Heavy Duty; Tile Grout; Portland Cement; Washed Sand; Tile Cutter Disc. Xv. Doors & Windows ( Q = 28.00 Set/s) Includes D1: 1-panel, 1000mm X 2100mm Aluminum Push & Pull Glass Door W/complete Accessories; D2: D2: 900mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D3: D3: 800mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D4: 700mm X 2100mm Flush Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 3 Sets Steel Hinges & Heavy Duty Door Knob); Ds: 1000mm X 2100mm Pre Fab Flush Door W/ss Kick Plate & Louver W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Of Steel Hinges & Heavy Duty Lever Type Door Knob); W1: 2-panels, 1200mm X 1600mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W2: 3-panels, 1200mm X 2300mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W3: 4-panels, 1200mm X 3100mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W4: 1-panel, 1100mm X 1200mm Fixed Window W/complete Accessories On Aluminum Frame W/complete Accessories; Ws: 1-panel, 300mm X 300mm Awning Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (2pcs Stainless Hinges & Heavy Duty Cam Handle Lock) Xvi. Electrical Works (q = 1.00 Lot) Includes Service Entrance Cap,1" 1/2 Ø; Emt Pipe,1"1/2 X10'; Secondary Rack W/spool Insulator,2-pole,w/ Screws; Grounding Rod,10ft,1/2", Copper Plated; Ground Clamp, 1/2", Copper Plated; Panel Board Tqd 2-pole Main, 12 Branches 2-pole Tqc, Bolt-on; Moulded Case Circuit Breaker, 150at,2p, 30kaic @ 415vac; Circuit Breaker, 15a,bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 20a, Bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 30a, Bolt-on, 2pole, 220v, 60hz; Grounding Busbar, Copper; Cu Wire, 2.0mm2,thhn/ Thwn-2, Stranded; Cu Wire, 3.5mm2, Thhn/thwn-2, Stranded;cu Wire,;5.5mm2,thhn(thwn-2,;stranded; Cu Wire, 14mm2,thhn(thwn-2, Stranded; Cu Wire, 50mm2,thhn(thwn-2, Stranded; Switch,16a,spst,w/plate,1-gang; Switch, 16a,spst,w/plate, 2-gang; Switch, 16a,spst,w/plate, 3-gang; Duplex Universal Outlet W/ Ground & Shutter Set, 250vac, 15a; Aircon Outlet W/ Ground, 1gang, 20a; Utility Box,4x2x1.5 In, Pvc; Led Panel Light, 40 Watts, 40001m,30x30 Cm,220-240vac; Led Panel Light,72 Watts, 59001m, 120x60 Cm,220-240vac; Led Round Recessed Pinlight Housing W/ Beehive Reflector W/ Glass Cover,e27 Fixture,6"; Led Bulb, Lw,e-27; Junction Box With Cover And Screws,pvc; Pvc Flexible Hose 1/2" X 100 Meters Corrugated Flex Pipe Fire; Pvc Conduit Pipe,15mm Dia X 3m; Solvent Cement 100cc; Assorted Pvc Connectors; Electrical Tape 3/4" X20yds. Xvii. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" X 2" Sanitary Tee; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 3" Dia. Pvc Clean Out W/adapter & Plug; 3" X 2" Pvc Sanitary Wye; Pvc Pipe Strap/clip; Bolt (54pcs), Nut (54pcs) And Washer (54pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc Cross Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; G.i Basket Strainer;4" X 4" Stainless Floor Drain; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Stainless Water Faucet (for Lavatory), W/complete Accessories-heavy Duty; Wall Faucet, W/complete Accessories-heavy Duty; Stainless Steel Pwd Handrail Grab Bar-grade 304 W/complete Accessories; 1hp Motor Pump, Heavy Duty; Water Meter-heavy Duty; Gate Valve-heavy Duty; Check Valve Heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,898,505.28 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Forty (140) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-128 (ceo-infra)
171-180 of 175 archived Tenders