Ppe Kit Tenders
Ppe Kit Tenders
HUMAN SETTLEMENTS ADJUDICATION COMMISSION CAR Tender
Textile, Apparel and Footwear
Philippines
Closing Date2 Jul 2024
Tender AmountPHP 182 K (USD 3.1 K)
Details: Description A. Go-bag Or Emergency Kit Set 22 A.1 Bag Specifications: *water Resistant *external Organization Pockets/compartments *internal Organization Pockets/compartments *with 4 Small Waterproof Pouches For Survival Kit, Toiletries, Personal Protective Equipment (ppe) And First Aid Kit *front Side And Strap Selectors For High Visibility A.2 Survival Kit - Each Kit Contains The Following Items: A.2.1. Multipurpose Tool A.2.2. Hand Press Flashlight(hand Crank) A.2.3. Whistle A.2.4. Glowstick A.2.5. Spor Or Eating Tool A.2.6. Magnetic Tent Light A.2.7. Thermal Blanket A.2.8. L630 Water Filter With Hydration Bladder Or Aqua Tabs A.2.9. Disposable Poncho A.2.10. Lighter A.3 First Aid Kit - Each Kit Contains The Following Items: A.3.1. Alcohol L(at Least 60ml) A.3.2. Adhesive Bandages (at Least 20pcs Band Aids) A.3.3. Adhesive Type Cloth/ Gauze Type (2.5cmx1m) A.3.4. Instant Cold Compress A.3.5. Non-latex Gloves A.3.6. Cpr Barrier Mask/rescue Mask A.3.7. Scissors (trauma Shears) A.3.8. Roller Bandages (gauze Bandage) (3 Inches X 10yds) A.3.9. Sterile Gauze Pads (4x4x8ply) A.3.10. Povidone Iodine (15ml) A.3.11. Facemask K-n95(3pcs) A.4 Hard Hat Specifications: *color: Orange *pin Lock Type Pe Suspension With Chin Strap B. Drrm Equipment B.1. Megaphone Pc 1 Shoulder Type With Siren, Whistle And Microphone B.2. Basket Stretcher Pc 1 Load Capacity With At Least 159 Kgs
BARANGAY WEST BALABAG, VALENCIA, NEGROS ORIENTAL Tender
Publishing and Printing
Philippines
Closing Date6 May 2024
Tender AmountPHP 75.1 K (USD 1.3 K)
Details: Description Item No. Unit Qty. Description Of Articles 1 Sq.ft 64 Digital Printed Billboard (70 Dpi) With Specified Coa Standards (64sq.ft.) 8'x8' 2 Bd.ft. 115 2"x3"x10' Coco Lumber (23 Lngths) 3 Bd.ft. 12 2"x3"x8' Coco Lumber (3 Lngths) 4 Bd.ft. 96.04 2"x2"x8' Coco Lumber (36 Lngths) 5 Kgs 4 4" Cw Nails 6 Kgs 2 1 1/2" Cw Nails 7 All For Safety Signages, Ppe & First Aide Kit 8 Bd.ft. 36 2"x3"x12' Coco Lumber (6 Lngths) 9 Cu.m 1 Gravel 10 Cu.m 2 Common Soil 11 Bags 42 Portland Cement (type 1) 12 Cu.m 1.5 Crushed Gravel (3/4") 13 Cu.m 4 River Sand 14 Pcs 18 Def. Bars 12mmø X 6.0m 15 Pcs 39 Def. Bars 10mmø X 6.0m 16 Kgs 6.5 G.i Tie Wire #16 17 Pcs 4 Pvc Construction Pail 18 Pcs 6 Hacksaw Blade 19 Pcs 340 4" Thick Concrete Hollow Blocks 20 Lngths 3 2"x3"x1.2mm Thick Tubular Steel 21 Lngths 5 2"x3"x1.0mm Thick C-purlins 22 Gals 1 Epoxy Primer Paint For Metal 23 Kgs 5 1/8"ø Welding Rod (good Quality) 20 Kgs./box 24 Pc 1 2" Paint Brush 25 Pc 1 1 1/2" Paint Brush 26 Bots 1 Lacquer Thinner 27 Pc 1 2" Steel Brush 28 Shts 3 Sand Paper 29 Sheets 5 0.40mm Thick X 1.05m Width X 2.85m Long Span Rib Type Roofing (pre-painted) 30 Pcs 2 0.40mm X 0.61mm X 2.44m End Wall Flashing (pre-painted) 31 Pcs 90 12 X 65mm Tek Screw - Steel 32 Pcs 50 5-3 Blind Rivets 33 Pc 1 Riveter 34 Pc 1 Aviation Tin Snip 35 Unit 1 (210m X 800m) Hollow Core Panel Door 36 Set 1 Door Knob 37 Sets 3 Door Hinges (4"x4") 38 Shts 4 1.2m X .m X 1/2" Ordinary Plywood
PROVINCE OF MAGUINDANAO OF THE NORTH Tender
Consultancy Services
Philippines
Closing Date20 May 2024
Tender AmountPHP 298.8 K (USD 5.1 K)
Details: Description ﷽ Republic Of The Philippines Bangsamoro Autonomous Region In Muslim Mindanao Province Of Maguindanao Del Norte Office Of The Bids And Awards Committee Provincial Government Satellite Office, Episcopal Bldg., Sinsuat Ave., Rosary Heights Ix, Cotabato City – Barmm Maguindanaodelnorte@gmail.com Request For Quotation The Local Government Unit Of Maguindanao Del Norte, Through Its Bids And Awards Committee (bac), Will Undertake A Small Value Procurement For The Procurement Of Veterinary Supplies In Accordance With Section 53.9 Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item Described Herein, Subject To The Terms And Conditions Provided At The Last Page Of This Request For Quotation (rfq). Submit Your Quotation Duly Signed By You Or Your Duly Authorized Representative Not Later Than The Pre-bid Schedule At The Provincial Government Satellite Office, Sinsuat Avenue, Cotabato City. Open Submission May Be Submitted, Manually Or Through Email At Bashrajahpandalat@gmail.com.ph. A Copy Of Your 2024 Business/mayor’s Permit1 And Philgeps Registration Number Are Required To Be Submitted Along With Your Quotation/proposal. An Omnibus Sworn Statements Shall Also Be Required Prior To Award. Qty Unit Item Description 2 Box Multisample Needle (21g X 1") 5 Box Gauze Pads 15 Pcs Surgical Suit (set) 3 Pack Surgical Cap 3 Pcs Alcohol Gel 3 Pack Edta Tubes Micro 0.5 Ml 3 Pack Edta Tubes 3ml 3 Pack Plain Red Top Tube 3ml 3 Pack Cryovial Laboratory Tubes 1.5 Ml 5 Pcs Test Tube Rack 24 Holes 22 Pcs Vacutainer Adapter 5 Box Cotton Tip Applicator Stick 100 Pcs Ppe Isolation Gown 1 Kit Avian Influenza Rapid Antigen Test Kit (300 Samples) 1 Kit African Swine Fever Rapid Antigen Test Kit (180 Samples) 5 Box Disposable Syringe (3ml) 2 Box Disposable Gloves 25 Kit Rabies Rapid Antigen Test Kit Abc: 298,865.00 For Further Information Please Refer To: Sgd. Dr. Tomanda D. Antok Provincial Administrator Bac-chairperson 09778477036
VETERANS AFFAIRS, DEPARTMENT OF USA Tender
Healthcare and Medicine
United States
Closing Date11 Apr 2024
Tender AmountRefer Documents
Details: 1. Title: Medical Kits For Mobile Medical Units And Mobile Incident 2. Purpose: The Network Contracting Office (nco) 16 Located At 5075 Westheimer Road, Galleria Financial Center, Suite 750, Houston, Texas, Hereby Issues The Following Sources Sought To Request Information (rfi) With The Intent Of Determining The Contractor Interest, Capabilities, Qualifications Of Potential Businesses, Nonmanufacturer Rule Compliance, Buy American Act Compliance, Trade Agreement Compliance And Estimated Industry Pricing Information For Market Research And Estimated Budgetary Purpose For The Medical Kits.
contractor Shall Provide All Shipping, Installation (if Required), Equipment, Personnel, Labor And Testing For Name Brand Or Equal Product. This Sources Sought Is Published For Market Research Purposes. This Sources Sought Will Be Used To Determine If A Set-aside For Any Small Business Program Is Appropriate. Government Anticipates A Competitive, Firm Fixed Price Contract. Please Review This Announcement, Respond To Questions Below And Review All Attachments In Their Entirety. government Requests That Interested Offerors Complete All Questions Below, Provide Required Documentation, Descriptive Literature And Authorization Letter As Described Below. The Government Is In No Way Obligated To Do Business With Or To Enter Into Any Form Of Contract With Any Person, Firm Or Other Entity That Receives Or Responds To This Announcement. 3. Objective: To Find Qualified And Certified Contractors With The Capability To Provide The Following Vericor Brand Or Equal Medical Kits:
clin 0001, Part Number, Ss-icp-ppe100, Kit - Infection Control And Prevention Ppe 100 Specialized Id* (quantity: 1 Kit);
clin 0002, Part Number, Mk-e, Kit - Examination - Medkit Module* (quantity: 1 Kit);
clin 0003, Part Number, Mk-l, Kit - Laboratory - Medkit Module* (quantity: 1 Kit);
clin 0004, Part Number, Mk-ma, Kit - Medication Administration - Medkit Module* (quantity: 1 Kit);
clin 0005, Part Number, Mc-micc-nb 003, Mobile Incident Command Center (navy Blue)* (quantity: 1 Each);
clin 0006, Part Number, Mc-micc-bl 003, Mobile Incident Command Center (violet Blue)*
(quantity: 1 Each);
clin 0007, Part Number, Mc-hicssm 001, Support Module For Mc-hics* (quantity: 2 Each).
*see Attached Statement Of Work (sow) For Kit Contents And Specifications. 4. Place Of Performance: Overton Brooks Va Medical Center 510 East Stoner Ave Shreveport, La 71101 5. Responses Requested: The Government Requires All The Following Information And Questions Answered In This Rfi/ss: Questions And Information That Is Not Provided Shall Be Considered Nonresponsive To The Request For Information And Contractor Shall Not Be Considered As Part Of The Market Research. Please Answer All Questions. a. Contractors Shall Provide Their Point(s) Of Contact Name, Address, Telephone Number, And Email Address; And The Company's Business Size, And Www.sam.gov Unique Entity Identification Number. b. Is Your Company A Small Business, Sdbs, Hubzone, Or 8a Concern? Please Provide Proof Of Qualifications. c. Does Your Company Meet All Required Four Prong Factors For The Nonmanufacturer Rule (nmr) Per Guidance Of Sba And 13 C.f.r. § 121.406 Offer Must Answer All Questions Below. 1. Does Your Company Exceed The 500 Employee Alternative Size Standard For Nonmanufacturers? _________ 2. Is Your Company Primarily Engaged In The Retail Or Wholesale Trade And Normally Sells The Type Of Products Being Supplied? __________ 3. Does Your Company Must Take Ownership Or Possession Of The Item(s) With Its Personnel, Equipment, Or Facilities In A Manner Consistent With Industry Practice? __________ 4. Does Your Company Supply The End Products Of A Small Business Manufacturer Or Processor Made In The United States? _____________ d. Is Your Company Considered Small Under The Naics Code 339113 e. Do You (offer) Manufacture The Product Yourself Or A Distributor Of The Items Being Researched Above? f. Are You An Authorized Distributor/reseller? Provide Evidence From Original Equipment Manufacturer (oem). g. Do You (offer) Supply A Product Manufactured By Another Domestic Small Business, If It Is A Nonmanufacturer? h. Do You (offer) Supply The Product Of Any Sized Manufacturer If Sba Has Granted A Waiver To The Nonmanufacturer Rule? i. Is Your (offer) Buy American Certificate Completed At The Www.sam.gov Website? Please Provide Evidence With Response. j. Is Your (offer) Trade Agreement Certificate Completed At The Www.sam.gov Website? Please Provide Evidence With Response. k. Information For The Name Brand Or Equal Product Being Requested, Is It Manufactured Outside The Us-domestic Non-available? l. Information For The Name Brand Or Equal Product Being Requested, Is It A Foreign Manufactured End Product Under The Trade Agreement? m. What Is Your Schedule Of Delivery After Receipt Of Order For The Name Brand Or Equal Product? n. For The Name Brand Or Equal Product Required, Is Your Company Available Under Any;
government Wide Agency Contract (gwac)
general Services Administration Schedules (gsa)
indefinite Delivery Indefinite Quantity (idiq)
blanket Purchase Agreement (bpa) if So, Please List The Contract Number For Name Brand Or Equal Product. o. Provide Descriptive Literature Demonstrating Ability To Meet All Of The Requirement/salient Characteristics Listed If Other Than Brand Name Product Is Being Offered. Please Provide List Of Contracts For Commercial, Federal, State, And Local Governments. Listed Contracts Shall Provide Communication On The Government Requirement Illustrating The Capability For Comparison. To The Name Brand Or Equal Product Meeting The Specific Requirements Per The Draft Statement Of Work. p. Request Contractors Provide Estimated Industry Pricing For Name Brand Or Equal Product For Market Research And Budgetary Purpose In Response To This Notice. 6. Opportunity: The Government Is Seeking Information From Potential Contractors On Their Ability To Provide These Supplies. This Is A Sources Sought For Request Information (rfi) Only. Small Business Concerns Are Encouraged To Provide Responses To This Sources Sought In Order To Assist The Government In Determining Potential Levels Of Competition Available In The Industry. Contractor Shall Possess The Capability To Provide All Requirements And Objectives. 7. Instructions And Response Guidelines: Sources Sought Responses Are Due By April 11, 2024 At 2:00pm (cst) Via Email To Tammy.demille@va.gov . all Questions Shall Be Submitted By April 8, 2024 At 2:00pm (cst) Via Email To Tammy.demille@va.gov . telephone Requests/inquires Will Not Be Accepted. public Information Will Not Be Provided And Shall Be Utilized To The Full Extent Possible. this A New Requirement. the Subject Line Shall Read: 36c25624q0707-rfi-sources Sought-mobile Medical Kits-shreveport. No Solicitation Exists At This Time. There Is No Page Limitation On Subparagraphs 5(a) - 5(o). please Provide The Information You Deem Relevant In Order To Respond To The Specific Inquiries Of The Sources Sought. Information Provided Will Be Used Solely By Government As "market Research" And Will Not Be Released Outside Of The Government Purchasing And Contract Team. this Sources Sought Notice Does Not Constitute A Request For Proposal (rfp), Invitation For Bid (ifb), Or Request For Quotation (rfq), And It Is Not To Be Construed As A Commitment By The Government To Enter Into A Contract, Nor Will The Government Pay For The Information Submitted In Response To This Request. All Information Contained In This Sources Sought Is Preliminary As Well As Subject To Modification And Is In No Way Binding On The Government. in Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The U.s. Government To Form A Binding Contract. If A Solicitation Is Released, It Is Will Be Synopsized On Contracting Opportunities (https://sam.gov/content/opportunities/) Website Or Gsa. It Is The Responsibility Of The Interested Parties To Monitor These Sites For Additional Information Pertaining To This Sources Sought, Or Future Rfp/rfq. 8. Contact Information:
contract Specialist: Tammy Demille email Address: Tammy.demille@va.gov your Responses To This Notice Are Appreciated. this Notice Is Not A Request For Competitive Quotes/proposals; However, Any Firm That Believes It Can Meet The Requirements May Provide Answers, Responses And Give Written Notification Prior To The Response Due Date And Time. Supporting Evidence And Responses Must Be Furnished In Enough Detail To Demonstrate The Ability To Perform The Requirements.
MUNICIPALITY OF VALENCIA Tender
Philippines
Closing Date20 Aug 2024
Tender AmountPHP 104.1 K (USD 1.8 K)
Details: Description 1. The Barangay Balili, Municipality Of Valencia, Negros Oriental, Through The General Fund (gf) Cy 2022 Intends To Apply The Sum Of One Hundred Four Thousand One Hundred Seventy-three Pesos And 45/100 Only (₱ 104,173.45) Being The Abc To Payments Under The Contract For Purchase Of Goods For The Improvement Of Covered Court With Pr# 2024-08-002. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Qty. Unit Of Measure Description Of Items Estimated Unit Cost Estimated Total Cost 1 64 Sq. Ft. Digital Printed Billboard (70 Dpi) With Specified Coa Standards (64 Sq. Ft.) 8’x 8’ 25.00 1,600.00 2 2 Shts. Marine Plywood (4’x8’x1/2” Thick) 700.00 1,400.00 3 15 Bd. Ft. 2”x3”x10’ Coco Lumber (3 Lngths.) 35.00 525.00 4 12 Bd. Ft. 2”x3”x8’ Coco Lumber (3 Lngths.) 35.00 420.00 5 42.67 Bd. Ft. 2”x2”x8’ Coco Lumber (16 Lngths.) 35.00 1,493.45 6 1 Kg. 4” Cw Nails 85.00 85.00 7 0.5 Kg. 1-1/2” Cw Nails 90.00 45.00 8 6 Sets 200 Watts Led Floodlight Daylight 7,500.00 45,000.00 9 200 Mtrs. #10/7 Thwn (black) 55.00 11,000.00 10 200 Mtrs. #10/7 Thwn (white) 55.00 11,000.00 11 50 Lngths. ¾” Ø Pvc Pipe 120.00 6,000.00 12 25 Pcs. ¾” Ø Pvc Elbow 60.00 1,500.00 13 16 Pcs. Junction Box 50.00 800.00 14 8 Pcs. Electrical Tape 55.00 440.00 15 1 Pc. Panel Board 4 Branches (bolt-on) 3,200.00 3,200.00 16 2 Pcs. Circuit Breaker Plug-in (30a) Bolt-on 520.00 1,040.00 17 200 Pcs. 12” Plastic/cable Tie 12.00 2,400.00 18 1 Pc. Circuit Breaker Plug-in (60a) Bolt-on 750.00 750.00 19 2 Sets Duplex Convenience Outlet (heavy Duty) 520.00 1,040.00 20 12 Mtrs. #6 Thwn (black) 120.00 1,440.00 21 12 Mtrs. #6 Thwn (white) 120.00 1,440.00 22 2 Lngths. 1” Ø Pvc Pipe 175.00 350.00 23 1 Pc. 1” Ø Entrance Cap Universal 350.00 350.00 24 2 Pcs. Spool Insulator 70.00 140.00 25 60 Mtrs. #6 Twisted Wire 42.00 2,520.00 26 3 Pcs. Electrical Tape 65.00 195.00 27 1 Lumpsum Bamboo (for Scaffolding) 6,000.00 6,000.00 28 1 Lumpsum Safety Signages, Ppe & First Aide Kit 2,000.00 2,000.00 Total 104,173.45 2. The Barangay Balili , Municipality Of Valencia, Negros Oriental, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 30 Days. Bidders Should Have Completed, Within 2 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Barangay Balili, Municipality Of Valencia, Negros Oriental And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On August 12, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (₱ 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before August 20,2024 @ 10:00 Am. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On August 20,2024 At The Given Address Below At Barangay Hall Balili, Valencia, Negros Oriental @ 10:00am. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Barangay Balili , Municipality Of Valencia, Negros Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Christian Anthony B. Perojon Bac Secretariat Bids And Awards Committee Barangay Balili, Valencia, Negros Oriental Or Kagawad Alberta Cancio Bac Chairman Barangay Balili, Valencia, Negros Oriental 09927219743 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph With Solicitation Number 2024-08-002 Alberta A. Cancio Bac Chairman
City Government Iligan Tender
Civil And Construction...+2Building Construction, Construction Material
Philippines
Closing Date29 Oct 2024
Tender AmountPHP 1.9 Million (USD 33.3 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 1 Cy 2024, Intend To Apply The Sum Of P 1,932,247.35 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Stage, Stalls And Comfort Rooms At Esplanade (construction Of Comfort Rooms At Esplanade), Brgy. Santiago, Iligan City With Project No. Cb(b)-24-108 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Stage, Stalls And Comfort Rooms At Esplanade (construction Of Comfort Rooms At Esplanade), Brgy. Santiago, Iligan City 1.) General Requirements •permits And Clerance •installation Of Project Billboard- 2 Sets •occupational Safety And Health Program •mobilization And Demobilization 2.) Earthworks •excavation Works For Footings •100 Mm Thk. Gravel Base For Footings 3.) Steel Reinforcements •installation Of 20mm Ø Dsb For Columns (c1) And Beams •installation Of 16mm Ø Dsb For Footings (f1) And Beam Const. •installation Of 1omm Ø Dsb Stirrups For Tiebeams And Lateral Ties •installation Of 12mm Ø Dsb For Floorslab Matting And Pump Assembly 4.) Plumbing Works •installation Of Soil Pipeline Using 4" Ø Pvc Pipes S1000 •installation Of Waste Pipeline Using 2" Ø Pvc Pipes S1000 •installation Of 2000l Portable Septic Tank •installation Of Coldwater Line Using 3/4" And 1/2" G.i Pipes S40 •installation Of 2000l Vertical Water Tank On A Fabricated Platform 5.) Concrete Works, Formworks And Scaffolding •installation Of Formworks And Falseworks For Columns Beams And Tiebeams •concrete Pouring For Footings ,columns , Plinth Beams And Beams •lnstallation Of 100 Mm Thk. Slab Flooring On A 1.0mm Thk. Steel Deck •installation Of Reinforced Concrete Ramps •removal Of Formworks And Falseworks •concrete Pouring For Pump Platform And Column- Footing 6.) Grouted Riprap •installation Of Class A Grouted Riprap H = 3.264 M; L = 15.45 M I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plans Ii.construction Safety And Health Program (q = 1.00 Lumpsum) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii.project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 3"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv.mobilization & Demobilization (q = 1.00 Lot) V.earthworks (q = 118.29 Cu.m.) Includes Volume To Be Excavated (v = 64.2938), Volume To Be Backfilled (v = 49.6025), Gravel Bedding 1-1/2" Ø (v = 3.88125) (+15% Shrinkage). Vi. Steel Reinforcements (q = 4,557.94 Kgs.) Includes 20mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 10 Mm Dia. X 6m Dsb, 4" Cutting Disc, #16 G.i Tie Wire. Vii. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4"x2" Dia. Pvc Sanitary Tee , S-1000; 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" Dia. Pvc Clean Out W/adapter & Plug; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" X 2" Dia. Pvc Sanitary Wye; 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc P-trap; 2" Dia. Pvc Wye; 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3/4" Diam. X 10'g.i. Pipe Water Supply Line; 3/4" X 1/2" Diam. G.i. Reducer Tee; 3/4" Diam. G.i. Elbow, 1/4 Bend (90 Deg.); 3/4"x 1/2" Diam. G.i. Reducer Elbow, 1/4 Bend {90 Deg.); 1/2" Diam. X Lo'g.i. Pipe Water Supply Line (sched. 40); 1/2" Diam. G.i. Threaded Pipe Elbow, 90 Deg.; 1/2" Dia.g.i. Threaded Pipe Tee; 1/2" Diam. Angle Valve; Teflon Tape, 3/4" X 10m; 2000l Portable Septic Tank; 2000 L Water Tank W/ Metal Platform (2 Cu.m). Viii. Concrete Works, Formworks And Scaffoldings (q = 35.53 Cu.m.) Includes Portland Cement (type 1), Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, Assorted Sized Coco Lumber (2" X 2" X 10' & 2" X 3" X 10')-300 Pcs, Assorted Sized C.w Nails, Steel Deck (1.0mm) (to Order Cutlist) Ix. Grouted Riprap (q = 29.40 Cu.m.) Includes Portland Cement (type 1), Washed Sand, Washed Gravel Fill, Weep Holes (2"pvc, S 1000), Filter Cloth, Boulders (15-25kg). Approved Budget For The Contract (abc): P 1,932,247.35 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Nine (109) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: October 8 –29, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference: October 15, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: October 29, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: October 29, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 8, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-108 (ceo-infra)
City Government Iligan Tender
Civil And Construction...+1Bridge Construction
Philippines
Closing Date19 Nov 2024
Tender AmountPHP 28.9 Million (USD 491.3 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Gen Fund-20% / Dev. Fund/ Sb No. 2 Cy 2024 Intend To Apply The Sum Of P 28,966,124.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Completion Of Merila Bridge (concrete Bridge) Sitio Merila, Brgy. Ubaldo Laya, Iligan City With Project No. Cb(b)-24-127 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Completion Of Merila Bridge (concrete Bridge) Sitio Merila, Brgy. Ubaldo Laya, Iligan City •general Requirements *installation Of Project Billboard,2 Sets; *staking Lay-out Of Line,grades & Elevation; *occupational Safety & Health Program; *field Office For The Engineer; •earthworks *embankment From Borrow; *subgrade Preparation; *aggregate Subbase Course, 200mm Thk.; •structural Concrete, Class A *using Ready Mix Concrete, 4000psi @28days For Pier Footing, Pier Column, Pier Cap, Bridge Road& Etc. •reinforcing Steel *using Grade 40 & 60 Reinforcing Steel Bar (deformed} W/#16 G.i Tie Wire; •sheet Piles, Cofferdaming & Slope Protection *steel Sheet Pile, Type Ns-sp-ill X 6meters; W = 400mm, H = 200mm, Thk. = 10.50mm, A = 153.0cm2/m,w = 48kg/m, Sec.mod = 874cm3/m •grouted Riprap, Class A *grouted Riprap W/15-25kgs Boulders Including The Installation Of Weep Holes & Filter Cloth; •portland Cement Concrete Pavement (unreinforced), 280mm Thk. *using Ready Mix Concrete,3500psi @14days, Including Installation Of Steel Forms & Reinforcing Steel Bar (deformed) Grade 40; *curing Compound & Asphalt Sealant •prestressed Structural Concrete Members - Type Iv Girder *installation Of Precast Type Iv Aashto Prestressed Girder; •preformed Cork Joint Expansion *installation Of Preformed Cork Joint Expansion; •elastomeric Bearing Pads *installation Of Elastomeric Bearing Pads; •drain Pipe *installation Of Galvanized Drain Pipe & 10 X 10 Square Bar; •craneway *filling Materials; B.5 Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 14' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 8' Coco Lumber, Assorted Sizes C.w Nails. B.7(1 ) Occupational Safety & Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. B.9 Mobilization & Demobilization (q = 1.00 Lot) A.1.1 (8) Field Office For The Engineer (q = 1.00 Lumpsum) Includes 1-set Of Standard Engineer Field Camp, Office Table, Cabinet, Chairs, Laptop And Service Vehicle; V. Embankment From Borrow (q = 1,183.36 Cu.m) Includes Embankment From Borrow (common Soil) W/15% Shrinkage Factor). 404(1)a Reinforcing Steel (q = 53,310.35 Kg/s) Includes Reinforcing Steel Bar (deformed), Grade 60 Bar W/ 5% Wastage; Reinforcing Steel Bar (deformed), Grade 40 Bar W/ 5% Wastage; #16 G.i Tie Wire. 405(1) A1 Structural Concrete Class A (q = 190.56 Cu.m.) Includes Ready Mix, 4000psi @28days Concrete; Curing Compound; 4' X 8' X 1/2" Thk. Ordinary Plywood; 2" X 3" X 10' Coco Lumber; Assorted Sized C.w Nails. Ix. Sheet Piles, Steel Cofferdaming & Slope Protection (q = 750.00 L.m) Includes Steel Sheet Piles, Type Ns-sp-iii X 6meters: Width, B = 400mm; Height, H = 200mm; Thickness, T = 10.5mm; A = 153.0 Cm2/m; W = 48 Kg/m; Sec. Mod. = 874 Cm3/m X. Craneway (q = 450.00 Cu.m) Includes Filling Materials 505 (1) Grouted Riprap, Class A (q = 100.00 Cu.m) Includes Portland Cement, Washed Sand, Gravel Fill, Weep Holes, Filter Cloth, Boulders (15-25kg.). 311 (1)b1 Portland Cement Concrete Pavement (unreinforced), 0.28m Thk. (q = B/.54 Cu.m) Includes Reinforcing Steel Bar (grade 40), Curing Compound, Asphalt Sealant, Steel Forms (rental), Ready Mix Concrete ( 3500psi @14days Concrete), Grease/tar. 105 (1)a Subgrade Preparation (common Materials) (q = 48.24 Cu.m) 200 (1) Aggregate Subbase Course (0.20m Thk.) (q = 48.24 Cu.m) Includes Aggregate Subbase Course, 200mm Thk. (common Borrow) W/ 15% Shrinkage Factor. Xv. Prestressed Structural Concrete Members .type Iv Girder (q = 8.00 Set/s) Includes Type V Aashto Prestressed Girder. Xvi. Preformed Cork Joint Expansion (q = 0.14 Set/s) Includes Preformed Cork Joint Expansion. Xvii. Elastomeric Bearing Pads (q = 16.00 Set;s) Includes Elastomeric Bearing Pads. Xviii.drain Pipe (galvanized) (q = 36.00 L.m) Includes Drain Pipe (galvanized), 10 X 10 Square Bar, Welding Rod (6011). Approved Budget For The Contract (abc): P 28,966,124.00 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Eighty-eight (188) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.pre - Procurement: October 22, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 2.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 3.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P10,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-127 (ceo-infra)
City Government Iligan Tender
Civil And Construction...+1Building Construction
Philippines
Closing Date29 Oct 2024
Tender AmountPHP 1.3 Million (USD 22.9 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 1 Cy 2024, Intend To Apply The Sum Of P 1,330,974.72 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Comfort Rooms At Esplanade, Night Market Etc. (completion Of Comfort Rooms At Esplanade) Brgy. Santiago, Iligan City With Project No. Cb(b)-24-107 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Comfort Rooms At Esplanade, Night Market Etc. (completion Of Comfort Rooms At Esplanade) Brgy. Santiago, Iligan City 1.) General Requirements •installation Of Project Billboards - 2 Sets •occupational Safety And Health Program •mobilization And Demobilization 2.) Container Units (2 Units) A.) Installation Of 6m X 3m Container Unit •20 Ft. Container Comfort Rooms ( 5.95m L X 3m W X 2.8m H) Unit Includes: •basic C - Channel Steel Frames •1 Set Solid Core Door, D1 •3/4" Mgo Boards Flooring •2"styrofoam Walls And Roof Insulation W/ Powder Coated Double G.i Sheet •5 Units Toilet & Bath, 1.20m X 1.20m (includes: Toilet, Sink, Ceramic Tile Flooring) •3 Units Urinal W/ Partitions •tiling Works (18 Sq.m) •8 Sets Recessed Downlight Led Round Type 7w Daylight •6 Sets Single Gang Switch W/ Led Set 10a, 230v •2 Sets Two Gang Switch W/ Led Set 10a, 230v B.) Installation Of 3m X 3m Container Unit •10 Ft. Container Office (3m L X 3m W X 2.8m H), Unit Includes: •1 Set Aluminum Frame Sliding Windows (1.20m X 3m) •1 Set Wooden Panel Door, D3 •3/4"mgo Boards Flooring •1 Set Wooden Panel Door, D3 •2"styrofoam Walls And Roof Insulation W/ Powder Coated Double Sided G.i. Sheet •1 Set Recessed Downlight Led Round Type 12w Daylight •2 Sets Duplex Convenience Outlet Vinyl Tiles 60cm X 60 Cm (a = 9 Sq.m) Acrylic Floor Adhesive 3.) Steel Works •installation Of 150 Mm X 50 Mm X 1.20mm Thk. Rectangular Tube, 100 Mm X 50 Mm X 1.20mm Thk. Rectangular Tube, 50 Mm X 50 Mm X 1.20 Mm Thk. Square Tube, 12 Mm X 12 Mm Square Bars. For Facade (refer To Plan) 4.) Electrical Works •installation Of Electrical Panelboard And Circuit Breakers In The Office Room •installation Of Electrical Conduits, Utility Box •installation Of Electrical Wirings ,switches , Convenience Outlet And Lighting Fixtures •termination Of Wirings In The Electrical Panelboard •installation Of Service Entrance Conduit , Cap, And Secondary Rack •check And Inspect Every Branch Circuit By Using Multitester. •prepare The Electrical System For Energization. 5.) Paintworks •paint Works & Finishes For All Wallings 6.) Tinsmithry •installation Of 0.5mm Thk. Long-span Rib Type •installation Of 100 Mmx 50mmx 6m X 1.2 Mm Thk. Rectangular Tube For Steel Girt, Trusses, Purlins (powder Coated) 7.) Pump Assembly •installation Of 2 Hp Horizontal Water Pump Set Specs: Power: 2 Hp Total Suction Lift Vertical Lift Inlet Diameter Flowrate Maximum Pressure I. Construction Safety And Health Program (q = 1.00 Lumpsum) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Ii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 3"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iii. Mobilization & Demobilization (q = 1.00 Lot) Iv. Container Units (q = 1.00 Lumpsum) Includes 1.) 20 Ft. Container Comfort Rooms ( 5.95m L X 3m W X 2.8m H) Unit Includes: Basic C - Channel Steel Frames; 1set Solid Core Door, D1; 3/4" Mgo Boards Flooring; 2"styrofoam Walls And Roof Insulation W/ Powder Coated Double G.i Sheet; 5 Units Toilet & Bath, 1.20m X 1.20m (includes: Toilet, Sink, Ceramic Tile Flooring); 3 Units Urinal W/ Partitions; Tiling Works A= 18 Sqm; 8 Sets Recessed Downlight Led Round Type 7w Daylight; 6 Sets Single Gang Switch W/ Led Set 10a, 230v; 2 Sets Two Gang Switch W/ Led Set 10a, 230v; 2.) 10 Ft. Container Office (3m L X 3m W X 2.sm H), Unit Includes: 1set Aluminum Frame Sliding Windows (1.20m X 3m); 1set Wooden Panel Door, D3; 3/4"mgo Boards Flooring; 2"styrofoam Walls And Roof Insulation W/ Powder Coated Double Sided G.i. Sheet; 1set Recessed Downlight Led Round Type 12w Daylight; 2 Sets Duplex Convenience Outlet; Vinyl Tiles 60cm X 60 Cm (a = 9 Sq.m); Acrylic Floor Adhesive V.pump Assembly (q = 1.00 Lot) Includes Horizontal Water Pump, Specs: Power (2hp), Total Suction Lift: (26.2 Ft.), Vertical Lift: (17 Ft.), Inlet Diameter (1- 1/4 "),outlet Diameter (1"), Flowrate (39.6 Gpm), Maximum Pressure (68 Psi); 1" Dia. X 6m Gi Pipe Sch 40; 1-1/4"' Dia. X 6m Gi Pipe Sch 80; 2" Dia. X 6m Gi Pipe Sch 80; Gi Pipe Reducer, 2" To 1-1/4" Dia.; Gi Pipe 90 Deg Coupling, 1" Dia.; Well Seal, 1-1/4" Dia.; Priming Tee And Plug, 1" Dia.; Priming Tee And Plug, 1-1/4" Dia.; Stainless Clamps, 1-1/4" Dia.; Stainless Clamps, 1" Dia.; Check Valve, 1-1/4" Dia.; Foot Valve; Pump Strainer Vi. Steel Works (q = 1,310.73 Kgs.) Includes 150mmx50mmx6mx 1.20mm Thk. Rectangular Tube, 100mmx50mmx6mx 1.20mm Thk. Rectangular Tube, 50mmx50mmx6mx 1.20mm Thk. Square Tube, 38mmx38mmx6mx 1.20mm Thk. Square Tube, 38mmx5mmx6m Flat Bars, 12mmx12mmx6mx Square Tube, Steel Deck (1.0mm) (to Order Cutlists), Welding Rods E-6011, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper, 50 Mm X 50 Mm X 6 Mm Angle Bar (for Platform), 50 Mm X 6mm Flat Bar (for Platform). Vi. Electrical Works (q = 1.00 Lot) Includes Electric Wire , 2.0mm2( #14awg) Thhn Stranded Copper Wire; Electric Wire I 3.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire I 5.5mm2( #10awg) Thhn Stranded Copper Wire; Electric Wire, 8.0mm2( #8awg) Thhn Stranded Copper Wire; Switch , 1gang Switch W/led Set 10a 220v; Switch ,2 Gang Switch W/led Set 10a 220v; Led Round Recessed Pin Light Housing W/ Beehive Reflector W/ Glass Cover, E27 Fixture; Ceiling Receptacle 4"dia.; Led Bulb,7w,6651m,ac 110-240v,e-27;led Bulb, 9w, 8551m, Ac 110-240v,e-27; Led Bulb,12w, 12001m,ac 110-240v,e-27; T8 Led Tube Light,18w,43x1220x31mm,gl3,single-ended W/ Fixture; Duplex Convenience Outlet; Weatherproof Cover For Switch & Outlets,2-gang,wpp-603, 0mni; Aircon Outlet, 20a; Electrical Tape 3/4" X20yds; Pvc Conduit Pipe , 1/2x3 Meters; Pvc Conduit Coupling (1/2)dia.; Pvc Conduit Elbow 90deg (1/2)dia.; Pvc Clamp 1/2mm (100pc/pack); Pvc Adaptor With Locknut 1/2; Junction Box, Pvc Octagonal W/ Cover 2"x4" Depth Type; Electrical Panelboard 6 Holes Plug In Type; Circuit Breaker 2 Pole 15at ,230v Plugin Type; Orcuit Breaker 2 Pole 20at, 230v Plugin Type; Circuit Breaker 2 Pole 50at, 230v Plugin Type; Utility Box 2"x3" Depth Type. Viii. Paint Works (q = 180.00 Sq.m.) Includes Red Oxide Metal Primer, Primer For Interior, Topcoat, Thinning Solvent For Primer And Topcoat, Tray Paint, Paint Brush 2", Putty (full), Sand Paper, Thinning Solvent For Putty. Ix. Tinsmithry (q = 51.11 Sq.m.) Includes 0.5 Mm Thk. Colored Roof Long Span Rib Type; 100mmx50mmx6mxl.2mm Thk. Rectangular Tube For Steel Girt,trusses, Purlins (powder Coated); Sealant; Tekscrew; Aviation Metal Snip Scissor. Approved Budget For The Contract (abc): P 1,330,974.72 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within Fifty (50) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: October 8 –29, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference: October 15, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: October 29, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: October 29, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 8, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-107 (ceo-infra)
City Government Iligan Tender
Finance And Insurance Sectors
Philippines
Closing Date23 Jul 2024
Tender AmountPHP 2.3 Million (USD 40 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Gen Fund-20% / Dev. Fund, Intend To Apply The Sum Of P 2,336,021.71 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Meat Inspection Quarters, Slaughter House Compound, Merila, Brgy. Ubaldo Laya, Iligan City With Project No. Cb(b)-24-068 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Meat Inspection Quarters, Slaughter House Compound, Merila, Brgy. Ubaldo Laya, Iligan City Scope Of Work: General Requirements: • Installation Of Project Billboard • Occupational Safety And Health Program • Mobilization And Demobilization Earthworks •76.35 Cu.m. Total To Be Excavated, Backfilled And Gravel Bedding,1-1/2" Ø Concrete Works, Formworks And Scaffoldings •21.53 Cu.m.total Of Concrete Works, Formworks & Scaffoldings For Foundation, Floor,smooth Finishing,columns, Slab On Grade, Wall-footing (foundation), Zocalo, Catch Basin Flooring (top & Bottom), & Septic Vault Flooring (top & Bottom); Cutting/bending,installation/fastening Of Rebars Masonry Works •188.88 Sq.m. Total Of Masonry Using 4" X 8" X 16" Concrete Hollow Blocks For Wallings, Wall-footing, Catch Basin, Septic Vault W/ Plaster Finish, Smooth On Expose Areas. Steel Reinforcements •total Of 1657.46 Kg Steel Reinforcement Using 10mm¢, 12mm¢ & 16mm¢ Dsb W/ #16 G.itie Wire Tile Works •total Area Of 6.48 Sq.m Installation Of 600mm X 600mm Non Skid Ceramic Tiles And Pvc Tile Trim For Comfort Room. Ceiling Works •total Area Of 139.91sq.m For Installation Of 4' X 8' X 4.smm Thk. Fcb, 19mm X 50mm X 0.4mm Thk. X 5m Double Furring, Blind Rivets, Concrete Nails And Riveter Paint Works & Finishes •a Total Of 464.15 Sq.m.of Skim Coat, Flat Latex Primer, Red Lead Paint For Steel Works, Baby Roller #4 Mini, Tray Paint, Paint Brush, 2", And Sand Paper For Finishes. Doors & Windows •d1:(5-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 1000mm X 2100mm •d2: (1-panel) Wooden Flush Door On 2" X 6" Wooden Door Jamb W/ Complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 800mm X 2100mm •d3: (1-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm •d4 (1-panel) Flush Door On 2" X 611 Wooden Door Jamb W/complete 'accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm •w1: (3-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On Bothsides On 50mm X 100mm Analok Frame W/complete Accessories (2pcs Of Heavy Duty Flush Lock) - 2500mm X 1200mm •w2: (2-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On 50mm X 100mm Analok Frame W/complete Accessories (1pc Of Heavy Duty Flush Lock)- 1700mm X 1200mm •w3: (1-panels) Awning Window W/ 6mm Thk . Bronze Glass On Upvc Frame W/complete Accessories (2pcs Of Steel Hinge & 1pcs Of Cam Handle Lock - 600mm X 600mm Plumbing Works •installation Of Water Pipe And Waste Pipe •installation Of Faucet And Sink Steel Works •a Total Of 268.07 Sq.m Installation Of 50mm X 50mm X 6m X 6mm Thk. Angle Bar, 38mm X 38mm X 6m X 4.mm Thk. Angle Bar, 25mm X 25mm X 4mm Angle Bar, 25mm X 25mm X 4mm Flat Bar Flat Bar, 2" X 3" X 6m X 1.2mm Thk. C-purlins And Epoxy Primer For All Steel Works. Tinsmithry •a Total Of 144.94 Sq.m. For Installation Of 0.40mm Thk. Pre-painted G.i. Rib-type Roofing, 0.40mm Thk. Plain Pre-fab G.i Sheet Ridge Roll, 0.40mm Thick G.i. Sht. Pre-fab Gutier,1.40mm Thk Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets, Riveter And Aviation Metal Snip Scissor For The Tinsmithry Work . I. Permits & Clearances (q = 1.00 Lumpsum) Includes Fire Fee, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plan. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2" X 2"x 8' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Earthworks (q = 70.35 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled, Gravel Bedding (1-1/2" Ø). Vi.concrete Works, Formworks And Scaffoldings (q = 21.64 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 3" X 10' Sized Coco Lumber, Assorted Sized C.w Nails. Vii. Masonry Works (q = 191.73 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand. Viii. Steel Reinforcements (q = 1,657.46 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Tile Works (q = 6.48 Sq.m.) Includes 600mm X 600mm Non Skid Ceramic Tiles (a = 6.48 Sq.m), Tile Adhesive (heavy Duty), Tile Grout, Portland Cement, Washed Sand, Pvc Tile Trim (6mm X 2.40m), 4" Ø Cutting Disc. X. Ceiling Works (q = 139.91 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb (a = 139.9125 Sq.m), 19mm X 50mm X 0.4mm Thk. X 5m Double Furring, Blind Rivets (1000pcs/box), Concrete Nails. Xi. Steel Works (q = 268.07 Sq.m.) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 17pcs, 38mm X 38mm X 6m X 4.mm Thk. Angle Bar- 64pcs, 25mm X 25mm X 4mm Angle Bar - 76 Pcs, 25mm X 25mm X 4mm Flat Bar Flat Bar- Spcs, 2" X 3" X 6m X 1.2mm Thk. C-purlins- 41pcs, Welding Rod (6011), Epoxy Primer, Red Lead Paint, 4" Paint Brush, 4" Ø Cutting Disc, 4" Ø Grinding Disc, Assorted Sand Paper. Xi . Tinsmithry (q = 144.95 Sq.m.) Includes 0.40mm Thk. Pre-painted G.i. Rib-type Rooang, 0.40mm Thk. Plain Pre-fab G.i Sheet Ridge Roll, 0.40mm Thk Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Sealant, Teksrew, Blind Rivets (1000pcs/box). Xiii. Paint Works & Finishes (q = 324.24 Sq.m.) Includes Skim Coat (a = 324.24 Sq.m), Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush (2"), Sand Paper. Xiv. Doors 8t Windows (q = 17.00 Set/s) Includes D1: (5-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 1000mm X 2100mm; D2: (1-panel) Wooden Flush Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 800mm X 2100mm; D3: (1-panel) Wooden Panel Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy Duty Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm; D4: (1-panel) Flush Door On 2" X 6" Wooden Door Jamb W/complete Accessories (4pcs Of 2" X 4" Heavy D Steel Hinge, Heavy Duty Door Knob) - 700mm X 2100mm; W1: (3-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On Bothsides On 50mm X 100mm Analok Frame W/complete Accessories (2pcs Of Heavy Duty Flush Lock) - 2500mm X 1200mm; W2: (2-panels) Sliding Glass Window W/6mm Thk. Bronze Glass W/fixed Glass On 50mm X 100mm Analok Frame W/complete Accessories (lpc Of Heavy Duty Flush Lock)- 1700mm X 1200mm; W3: (1-panels) Awning Window W/6mm Thk . Bronze Glass On Upvc Frame W/complete Accessories (2pcs Of Steel Hinge & 1pc Of Cam Handle Lock - 600mm X 600mm. Xv.electrical Works (q = 1.00 Lot) Includes Electric Wire ,2.0mm2( #14awg) Thhn Stranded Copper Wire; Electric Wire ,3.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire ,5.5mm2( #12awg) Thhn Stranded Copper Wire; Electric Wire, 8.0mm2( #sawg) Thhn Stranded Copper Wire; Electric Wire, 14.0mm2 (#sawg) Thhn Stranded Copper Wire; Switch, 1gang Switch W/led Set 10a 220v; Switch, 2 Gang Switch W/led Set 10a 220v; Switch, 3 Gang Switch W/led Set 10a 220v; T8 Batten Type Led Tube 18w Daylight 4ft.; Led Bulb 9w, 230v Daylight; Ceiling Receptacle 4"; Duplex Convenience Outlet; Airconditioning Outlet; Electrical Tape 3/4" X20yds; Pvc Conduit Pipe, 1/2x3 Meters; Pvc Conduit Coupling (1/2)dia. ;pvc Conduit Elbow 90deg {1/2)dia.;pvc Clamp 1/2mm (100pc/pack); Pvc Adaptor With Locknut 1/2; Junction Box, Pvc Octagonal W/ Cover 2"x4" Depth Type; Electrical Panelboard 6 Branches Plugin Type; Circuit Breaker 2 Pole 15at ,230v Plugin Type; Circuit Breaker 2 Pole 20at, 230v Plugin Type; Circuit Breaker 2 Pole 30at, 230v Plugin Type; Circuit Breaker 2 Pole 60at, 230v Plugin Type; Utility Box 2"x3" Depth Type; Emt Pipe (20mm) 1/2x3; Secondary Rack With 2 Spool; Service Entrance Cap 20mm. Xvi. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" Dia. Pvc Coupling; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Sanitary Wye; 3" Dia. Sanitary Tee; 3" X 2" Dia. Sanitary Tee; 3" Dia. Pvc Clean Out W/adapter & Plug; Pipe Strap/clip (for Downspout Pipe); Bolt {100pcs), Nut (100pcs) And Washer (100pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; Gate Valve-heavy Duty; Check Valve Heavy Duty; G.i Basket Strainer; 4" X 4" Stainless Floor Drain; Stainless Double Bowl Kitchen Sink/ Faucet & Flexible Hose-heavy Duty; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Faucet, W/flexible Hose-heavy Duty(lavatory); Wall Faucet, W/flexible Hose-heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,336,021.71 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Seven (107) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: July 2– July 23, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2. Pre-bid Conference: July 9, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3. Submission Of Bids: July 23, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Opening Of Bids: July 23, 2024– 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: July 2, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. Cb(b)-24-068 (ceo-infra)
City Government Iligan Tender
Civil And Construction...+1Building Construction
Philippines
Closing Date19 Nov 2024
Tender AmountPHP 2.8 Million (USD 49.1 K)
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund Intend To Apply The Sum Of P 2,898,505.28 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City With Project No. Cb(b)-24-128 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City • General Requirements *permits & Clearances; *installation Of Project Billboard,2 Sets; *occupational Safety & Health Program; • Removal Of Structures, Obstructions, Clearing & Grubbing *existing Concrete Structures; *cutting Of Trees •earthworks *excavation For Foundation ,tie Beam, Zocalo, Catch Basin, Wall-footing & Septic Vault; *backfilling & Compaction For The Slab On Grade; *gravel Bedding For Foundation ,slab On Grade, Tie Beam, Zocalo, Wall-footing, Septic Vault, & Catch Basin; • Concrete Works, Forms & Scaffoldings *concrete Pouring For Foundation, Columns, Tie Beam, Roof Beams, Septic Vault Flooring (top & Bot), Zocalo (foundation), Ramp Flooring , Wall-footing (foundation), Slab On Grade, & Catch Basin Flooring (top & Bot); • Masonry Works *installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor ,wall-footing , Septic Vault, Catch Basin,& Zocalo, W/plaster Finish,& Smooth On Expose Areas; *using 10mmø X 6m Deformed Steel Bars W/#16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @ 3rd Layer; • Steel Reinforcement *using 10mmø, 12mmø,& 16mmø Deformed Steel Bars W/#16 G.i Tie Wire; • Paint Works & Finishes; *skim Coating & Paint Works For All Wallings And Columns At Ground Floor; •tinsmithry Works *installation Of 0.4mm Thk. Colored Root Long-span Rib Type,0.4mm Thk. Pre-fab Flashing Gutter,0.4mm Thk. Pre-fab Fascia Cover, & 0.30m X 2.40m X 0.4mm Thk . Pre-fab Colored Gutter Spanish Type W/complete Accessories; • Ceiling Works *installation Of 4' X 8' X 4.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/complete Accessories ; • Tile Works *installation Of 300mm X 300mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Ceramic Wall Tiles W/pvc Tile Trim & 600mm X 600mm Floor Tiles; • Doors & Windows *installation Of Pre-fab Wooden Panel Door & Flush Door W/complete Accessories; & Aluminum Glass Door; *installation Of Fixed, Sliding & Awning Glass Window On Aluminum Frame W/complete Accessories; • Electrical Works; *installation Of Electrical Wirings , Connections W/complete Accessories & Fixtures; • Plumbing Works *installation Of Pvc Pipes, Fittings & G.i Pipes; *installation Of G.i Basket Strainer, Pipe Strap/clip W/nut & Washer For 3"ø Pipe (downspout); *installation Of Plumbing Fixtures Such As, Water Closet, Lavatory, Stainless Floor Drain, Stainless Wall Faucet, *installation Of Motor Pump, Water Meter, Check Valve, Gate Valve & Stainless Handrail Grab-bar; • Steel Works *fabrication & Installation Of 2" X 6" X 1.20mm Thk. Channel For Steel Trusses & Web Members, 1" X 1" X 4.0mm Thk. Angle Bar & 1" X 3.0mm Thk. Flat Bar For Steel Fascia Frame; *installation Of 2" X 4" X 1.0mm Thk. C-purlins W/ 10mmø Sagrods And Installation Also Of 6mm Thk. Base Plate And Must Be Full Weld On Steel Trusses At The Top Of The Column W/4-10mmø Anchor Bolt W/ Nut & Washer To Be Full Weld On Vertical Bars; *installation Of 1-1/2"ø Stainless Steel Pipe Railings- Grade 304 For Ramp Only; *all Steel Works Must Be Coat With Epoxy Primer; I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)- 6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Removal Of Structures, Obstructions & Clearing & Grubbing (q = 1.00 Lot) Includes Existing Concrete Structures, Cutting Of Trees. Vi. Earthworks (q = 78.01 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled/re-use, Pit Run Soil/earthfill, Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 25.98 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/2" Thk. Ordinary Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 231.21 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Steel Reinforcements (q = 2,720.67 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. X. Steel Works (q = 1,027.28 Kg/s) Includes 2" X 6" X 1.20mm Thk. Channel (rafter/truss) - 32pcs, 1" X 1" X 4.0mm Thk. Angle Bar - 18pcs, 1" X 3.0mm Thk. Flat Bar - 8pcs, 2" X 4" X 1.0mm Thk. C-purlins - 36pcs, Sagrods-10mmø X 6mm Dsb- 6pcs, 1-1/2"ø X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304, 4' X 8' X 6mm Thk. Mild Steel Plate, 10mmø Anchor Bolt (l-type) W/5% Wastage, Welding Rod (6011), Stainless Welding Rod, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi. Tinsmithry ( Q = 127.92 Sq.m.) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored Ridge Roll, 0.4mm Thk. X 8', Pre-fab Colored Flashing Gutter, 0.4mm Thk. X 8', 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes ( Q = 336.30 Sq.m.) Includes Skim Coat, Neutralizer, Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush 2", Sand Paper. Xiii . Ceiling Works (q = 80.00 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb, A = 80.00 Sq.m; 19mm X 50mm X 0.5mm Thk. X 5m Double Furring; W-clip; Blind Rivets (1000pcs/box); 1" X 3mm Screw; 300mm X 300mm Wall Exhaust Fan; Concrete Nails; Aviation Metal Snip Scissor; Riveter. Xiv. Tile Works (q = 107.00 Sq.m.) Includes 600mm X 600mm Ceramic Floor Tiles, A= 76.79 Sq.m; 300mm X 300mm Non Skid Ceramic Floor Tiles, A = 6.81 Sq.m; 300mm X 600mm Ceramic Wall Tiles, A = 23.40 Sq.m; Pvc Tile Trim, 6mm X 2.40m; Tile Adhesive, Heavy Duty; Tile Grout; Portland Cement; Washed Sand; Tile Cutter Disc. Xv. Doors & Windows ( Q = 28.00 Set/s) Includes D1: 1-panel, 1000mm X 2100mm Aluminum Push & Pull Glass Door W/complete Accessories; D2: D2: 900mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D3: D3: 800mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D4: 700mm X 2100mm Flush Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 3 Sets Steel Hinges & Heavy Duty Door Knob); Ds: 1000mm X 2100mm Pre Fab Flush Door W/ss Kick Plate & Louver W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Of Steel Hinges & Heavy Duty Lever Type Door Knob); W1: 2-panels, 1200mm X 1600mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W2: 3-panels, 1200mm X 2300mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W3: 4-panels, 1200mm X 3100mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W4: 1-panel, 1100mm X 1200mm Fixed Window W/complete Accessories On Aluminum Frame W/complete Accessories; Ws: 1-panel, 300mm X 300mm Awning Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (2pcs Stainless Hinges & Heavy Duty Cam Handle Lock) Xvi. Electrical Works (q = 1.00 Lot) Includes Service Entrance Cap,1" 1/2 Ø; Emt Pipe,1"1/2 X10'; Secondary Rack W/spool Insulator,2-pole,w/ Screws; Grounding Rod,10ft,1/2", Copper Plated; Ground Clamp, 1/2", Copper Plated; Panel Board Tqd 2-pole Main, 12 Branches 2-pole Tqc, Bolt-on; Moulded Case Circuit Breaker, 150at,2p, 30kaic @ 415vac; Circuit Breaker, 15a,bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 20a, Bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 30a, Bolt-on, 2pole, 220v, 60hz; Grounding Busbar, Copper; Cu Wire, 2.0mm2,thhn/ Thwn-2, Stranded; Cu Wire, 3.5mm2, Thhn/thwn-2, Stranded;cu Wire,;5.5mm2,thhn(thwn-2,;stranded; Cu Wire, 14mm2,thhn(thwn-2, Stranded; Cu Wire, 50mm2,thhn(thwn-2, Stranded; Switch,16a,spst,w/plate,1-gang; Switch, 16a,spst,w/plate, 2-gang; Switch, 16a,spst,w/plate, 3-gang; Duplex Universal Outlet W/ Ground & Shutter Set, 250vac, 15a; Aircon Outlet W/ Ground, 1gang, 20a; Utility Box,4x2x1.5 In, Pvc; Led Panel Light, 40 Watts, 40001m,30x30 Cm,220-240vac; Led Panel Light,72 Watts, 59001m, 120x60 Cm,220-240vac; Led Round Recessed Pinlight Housing W/ Beehive Reflector W/ Glass Cover,e27 Fixture,6"; Led Bulb, Lw,e-27; Junction Box With Cover And Screws,pvc; Pvc Flexible Hose 1/2" X 100 Meters Corrugated Flex Pipe Fire; Pvc Conduit Pipe,15mm Dia X 3m; Solvent Cement 100cc; Assorted Pvc Connectors; Electrical Tape 3/4" X20yds. Xvii. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" X 2" Sanitary Tee; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 3" Dia. Pvc Clean Out W/adapter & Plug; 3" X 2" Pvc Sanitary Wye; Pvc Pipe Strap/clip; Bolt (54pcs), Nut (54pcs) And Washer (54pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc Cross Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; G.i Basket Strainer;4" X 4" Stainless Floor Drain; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Stainless Water Faucet (for Lavatory), W/complete Accessories-heavy Duty; Wall Faucet, W/complete Accessories-heavy Duty; Stainless Steel Pwd Handrail Grab Bar-grade 304 W/complete Accessories; 1hp Motor Pump, Heavy Duty; Water Meter-heavy Duty; Gate Valve-heavy Duty; Check Valve Heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,898,505.28 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Forty (140) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-128 (ceo-infra)
161-170 of 170 archived Tenders