Plywood Tenders
Plywood Tenders
City Government Iligan Tender
Civil And Construction...+1Building Construction
Philippines
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 1 Cy 2023 Intend To Apply The Sum Of P6,743,095.30 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Halfway House Including Amenities, Brgy. Rogongon, Iligan City With Project No. Cb(b)-24-123 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Halfway House Including Amenities, Brgy. Rogongon, Iligan City • Earth Works - Excavation For Foundations , Septic Vault,ground Tank, Grease Trap And Catch Basin - Backfilling, Earth Fill And Gravel Fill For Foundations And Building Area • Concrete Works - Concreting For Foundations ,columns, Beams, Ground Floor And 2nd Floor Slabs, Staircase , Roof, Septic Vault, Ground Tank, Grease Trap And Catch Basin - Formworks For Columns And Beams, And Scaffoldings For Building Construction • Masonry Works - Chb Walling For Building Exterior (foundation To 2nd Floor) ,chb For Ground Floor Interior Walling Up To Floor Line, Chb For Septic Vault, Ground Tank, Grease Trap And Catch Basin • Steel Reinforcement - Installation Of Deformed Steel Reinforcing Bars For Concrete And Masonry Structures • Steel Works - Construction Of Roofing Trusses And Purlins • Doors & Windows - Fabrication & Installation Of Ground Floor Doors And Windows (exterior) • Tinsmithry - Building Roofing Using Prepainted Rib-type Roofing Sheets And Prefab Ridge Rolls • Plumbing - Laying Of Embedded Waste And Water Lines For Ground Floor And Second Floor I. Project Billboard (q = 2.00 Sets) Includes 4' X 8' Tarpaulin, 8' X 8' Tarpaulin, 2" X 3" X 14' Coco Lumber, 2" X 3" X 10' Coco Lumber, 2" X 2" X 8' Coco Lumber, Assorted Sizes C.w. Nails. Ii. Occupational Safety And Health Program (q = 1.00 L.s.) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe. Iii. Permits And Clearance (q = 1.00 L.s.) Includes Fire Safety Evaluation Fee, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3). Iv. Mobilization / Demobilization (q = 1.00 Lot) V. Earthworks (q = 253.00 Cu.m.) A. Excavation (q = 131.00 Cu.m.) Includes Volume To Be Excavated. B. Earth Fill (q = 85.00 Cu.m.) Includes Volume For Earth Fill (includes Compaction): Petrun Soil (for Earth Fill) (w/ Compaction). C. Gravel Bedding (q = 37.00 Cu.m.) Includes Volume For Gravel Bedding: 1-1/2" Gravel Bedding (0.10m Thk.). Vi. Concrete Work, Formwork &. Scaffolding (q = 148.31 Cu.m.) Includes Portland Cement Type 1astm C-150 Pns 07, Washed Sand, Washed Gravel, (for Formworks And Scaffoldings): 1.2mm Thk. X 1.0m Width Composite Steel Deck, 4'x8'x1/4"thk. Marine Plywood, 2" X 2" X 12' Coco Lumber, Assorted Sizes C.w. Nails, Steel Scaffolding (including Complete Accessories) Vii. Masonry Work ( Q = 598.28 Sq.m.) Includes 4" X 8" X 16" Chb (700psi), Portland Cement Type 1astm C-150 Pns 07, Washed Sand, Skim Coat (20kg). Viii. Steel Reinforcement ( Q = 22,027.74 Kgs.) Includes 20mmø X 6000mm Dsb (grade 40), 16mmø X 6000mm Dsb (grade 40), 12mmø X 6000mm Dsb (grade 40), 10mmø X 6000mm Dsb (grade 40), #16 Gi Tie Wire. Ix. Steel Work ( Q = 257.00 Lengths) Includes 50mm X 50mm X 6mm Thk. Angle Bar (6m/length), 38mm X 38mm X 6mm Thk. Angle Bar (6m/length), 50mm X 50mm X 2mm Thk Tubular Bar (6m/length), 50mm X 100mm X 1.2mm Thk. C-purlins (6m/length), 1.2m X 2.4m X 10mm Thk. Ms Plate, Welding Rod (6011), Grinding Disk, Cutting Disk. X. Doors &. Windows (q = 15.00 Units) Includes D1: 4000mm X 2150mm (4 - 1000mm X 2150mm Panels) Fixed Glass Partition W/ Aluminum Framed Double Glass Swing Door, W/ Complete Accessories; D6: 800mm X 2150mm Flush Door, Including Door Knob, Jambs And Accessories; Wl: 2300mm X 1200mm (4 - 600mm X1200mm Panels) Analok Frame Sliding Window W/ 1/4" Thk. Bronze Glass; W2: 2500mm X 1200mm (2 - 1250mm X 1200mm Panels) Analok Frame Sliding Window W/ 1/4" Thk. Bronze Glass; W3: 2500mm X 800mm (2 - 1250mm X 800mm Panels) Analok Frame Sliding Window W/ 1/4" Thk. Bronze Glass; W4: 600mm X 600mm Analok Frame Awning Window W/ 1/4" Thk. Bronze Glass. Xi. Tinsmithry (q = 227.00 Ln.m.) Includes 1.1m X 0.50mm Thk Prepainted Rib-type Roofing, 0.9m X 2.4m X 0.5mm Thk. Prefab Ridge Roll, Tek Screw, Vulca Seal, 5mm Thk X 1000mm Insulation Foam (50m/roll), Touch-up Paint (500ml/can) . Xii. Plumbing (q = 1.00 Lot) Includes 4"x 4" Floor Drain, Stainless; 6" Dia. X 10' Pvc Pipe, S-1000; 4" Dia. X 10' Pvc Pipe, S-1000; 2" Dia. X 10' Pvc Pipe, S-1000; 6" Dia. Pvc Cleanout; 6" Dia. Pvc Coupling; 4" Dia. Pvc Elbow, 1/4 Bend; 4" Dia. Pvc Sanitary Tee; 4" Dia. Pvc Cleanout; 4" Dia. Pvc P-trap; 4" Dia. Pvc Coupling; 6" To 4" Pvc Tee Reducer; 4" To 2" Pvc Tee Reducer; 4" To 2" Pvc Bushing Reducer; 2" Dia. Pvc Elbow, 1/4 Bend; 2" Dia. Pvc Wye; 2" Dia. Pvc Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Cleanout; 2" Dia. Pvc Coupling; Pvc Cement,400 Cc; 1/2" Dia. G.i. Elbow; 1/2" Dia. G.i. Tee; 1/2" Dia. X 4" G.i. Nipple; 1/2" Dia. G.i. Coupling; 1/2" Dia. X 20' G.i. Pipe, S-40; 1/2" Dia. Float Valve; 1/2" Dia. Gate Valve; Teflon Tape (big). Approved Budget For The Contract (abc): P 6,743,095.30 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Sixty (160) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.pre - Procurement: October 18, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 2.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 3.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P10,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-123 (ceo-infra)
Closing Date19 Nov 2024
Tender AmountPHP 6.7 Million (USD 116.4 K)
City Of Bayawan Tender
Civil And Construction...+1Civil Works Others
Philippines
Details: Description Request For Quotation Rfq No. Svp 24-p-267 Date October 24, 2024 Pr Reference Pr-300-24-09-049 Philgeps Reference No. End-user Ceo Closing Date November 8, 2024 @5:00 P.m. Bid Opening November 12, 2024 @ 9:00 A.m. Designated Places Of Submission (bid Box Designated Locations) 1. Bac Office, Cabcabon, Bayawan City 2. Public Market Office, Bayawan City 3. Sidlakan Extension Office (dgte. City) Name Of Business: Address: Name Of Store: Business Permit No.: Tax Identification No.: Philgeps Reg. No.: The Local Government Unit Of Bayawan City, Through Its Bids And Awards Committee, Intends To Procure Goods/services As Enumerated In The Proposal Form. Please Submit Your Quotations/proposals Duly Signed By You Or Your Duly Authorized Representative Not Later Than The Closing Date For The Item(s) Described, Subject To The Terms And Conditions Provided At The Back Portion Of This Request For Quotation (rfq). A Copy Of Your Current Business Permit And Philgeps Certificate Or Registration Is Also Required To Be Submitted Along Withyour Quotation/proposal. Quotations May Be Submitted Manually, Or Through Facsimile Or Email At The Address And Contact Numbers Indicated Below. For Any Clarification, Please Contact The Bac Secretariat At Telephone Number (035) 4300439 Or Email Address At Bac.bayawan@gmail.com. Virginia D. Sadiasa City Civil Registrar Bac Chairman Acknowledgement Receipt I/we Hereby Acknowledge Receipt Of This Request For Quotation (rfq), And Hereby Agree To The Terms And Conditions Set Therein. We Assume Responsibility To Deliver/submit Our Proposal On Or Before The Closing Date And Time At The Designated Bid Boxes; Otherwise, Lgu Bayawan City Can Consider Us Not Interested To Quote. (signature Over Printed Name / Date) Terms And Conditions 1 Bidders Shall Provide Correct And Accurate Information Required In This Form. Errors In Price Quotation Shall Be Exclusively The Supplier’s Responsibility. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 2 Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties, And/or Levies Payable. All Prices Offered Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 3 Quotations Exceeding The Approved Budget For The Contract (abc) Shall Be Rejected. 4 Indicate In The Proposal The Brand, Model And Technical Specifications Of The Items Quoted; Otherwise, The Bid Will Be Rejected. Specifying The Country Of Origin, The Terms “generic”, “original”, And The Like Are Not Considered Brand Names. Indicate No Brand If The Item Quoted Is Generally Unbranded. 5 Alternative Bids Shall Be Rejected Outright. For This Purpose, Alternative Bid Is An Offer Made By A Bidder In Addition Or As A Substitute To Its Original Bid Which May Be Included As Part Of Its Original Bid Or Submitted Separately Therewith For Purposes Of Bidding. A Bid With Options Is Considered An Alternative Bid Regardless Of Whether Said Bid Proposal Is Contained In A Single Envelope Or Submitted In Two (2) Or More Separate Bid Envelopes. 6 Award Will Be Made To The Lowest Calculated And Responsive Bid (lcrb) – The Bid Determined, After Post-qualification, As Complying To The Eligibility And Bid Requirements. 7 Basis Of Evaluation For This Rfq: Per Lot Per Item 8 Breaking Of Ties. A Non-discretionary Method Of Breaking Ties Will Be Used, I.e. Tossing Of Coin (for Two Bidders) Or Draw Lots (for Three Or More Bidders). 9 The City Of Bayawan Reserves The Right Not To Award Any Contract To A Bidder Having A Pending And Overdue Delivery Obligation To The City And Defaulted The Prescribed Delivery Period In Previous Award/s From The City Of Bayawan. 10 The Prescribed Delivery Period Is Within Thirty (30) Calendar Days, Unless Explicitly Indicated In The Proposal. Extension Of Delivery Period, If Granted, Shall In No Case Exceed The Original Delivery Term. Unless Otherwise Stated, The Default Place Of Delivery Is F.o.b. Bayawan City Warehouse, Cabcabon, Bayawan City Warehouse, Cabcabon, Bayawan City. 11 Supplier/s Must Deliver The Items Awarded Within The Period Specified In The Purchase Order. Purchase Order Issued Shall Automatically Be Cancelled If No Delivery Is Made After Thirty (30) Calendar Days After Receipt Thereof, Without Prejudice To Legal Courses Of Action (e.g. Imposition Of Liquidated Damages, Suspension And Blacklisting) Provided In Republic Act 9184 And Its Irr. The Rescinded Contract May Be Re-awarded To The Next Lowest Calculated And Responsive Bidder. 12 Warranty. To Assure That Manufacturing Defects Are Corrected By Supplier, A Warranty Security Shall Be Required For A Minimum Of Three (3) Months For Expendable Supplies, And One (1) Year In The Case Of Non-expendable Supplies. The Obligation Shall Be Covered By Retention Money (1%) Of The Contract Price And Shall Be Released Only After The Lapse Of The Warranty Period Or In The Case Of Expendable Supplies, After Consumption Thereof: Provided, However, That The Supplies Delivered Are Free From Patent And Latent Defects And All The Conditions Imposed Under The Contract Have Been Fully Met. Rfq Proposal Form Rfq Reference: Svp 24-p-267 Total Abc: Php 583,656.60 After Having Carefully Read And Accepted The Terms And Conditions, I/ We Submit Our Quotation For The Item(s) As Follows: Item No. Description Qty Unit Of Issue Approved Budget For The Contract ( Unit Cost Per Line Item ) Offer Compliance With Technical Specifications (please Check) Remarks (indicate The Price, Brand/model And Specifications. Attach Brochure If Available.) Yes No Unit Cost Total Cost Brand/model And Technical Specifications Purpose : Construction Of 1 Barrel Flat Slab Bridge At Sitio Malon, Brgy. Tabuan ( 2nd Revision) 1 Cement, Portland (40kgs/bag), Type 1 141 Bag 290.00 [ ] [ ] 2 Hollow Block, Concrete 15cm X 20cm X 40cm 50 Piece 20.00 [ ] [ ] 3 Plywood, Marine, 4.5mm X 1.2m X 2.4m, Type I, Grade A/a 5 Sheet 650.00 [ ] [ ] 4 Phenolic Board, 18mm-20mm X 1.22m X 2.44 Type 1 20 Sheet 2,067.00 [ ] [ ] 5 Tie Wire, #16 61 Meter 100.00 [ ] [ ] 6 Blade, Hacksaw, 12mm X 300mm, 18tpi, (excellent Quality) 40 Piece 70.00 [ ] [ ] 7 Screen/mesh Wire, 3mm Eyehole X 0.90m Width (m) 1 Linear Meter 130.00 [ ] [ ] 8 Nails, Common Wire 38mm 3 Kilo 76.00 [ ] [ ] 9 Nails, Common Wire 63mm 7 Kilo 70.00 [ ] [ ] 10 Nails, Common Wire, 100mm (4") 10 Kilo 67.00 [ ] [ ] 11 Nails, Concrete 63mm 1 Kilo 120.00 [ ] [ ] S 12 Nails, Umbrella/roofing, 62mm (2 1/2") 2 Kilo 126.00 [ ] [ ] 13 Sealant, Elastomeric/roof (1/4kg/pk) 2 Pack 177.80 [ ] [ ] 14 Sack Cloth, 3.0m Width (100m/roll), Blue 2 Roll 10,360.00 [ ] [ ] 15 Nylon, # 80 1 Kilo 560.00 [ ] [ ] 16 Nylon, # 120 1 Kilo 490.00 [ ] [ ] 17 Commercial Lumber, G-melina, Mahogany And Equivalent, 50mm X 50mm X 3.0m 24 Piece 186.75 [ ] [ ] 18 Commercial Lumber, G-melina, Mahogany And Equivalent, 50mm X 75mm X 3.0m 16 Piece 280.00 [ ] [ ] 19 Corrugated Sheet, G.i. 0.27mm X 3.0m) 10 Sheet 498.00 [ ] [ ] 20 Scaffolding Clamp, Swivel 50mm X 50mm 128 Piece 125.00 [ ] [ ] 21 Adjustable Base Jack, 32mm X 400mm 20 Piece 646.00 [ ] [ ] 22 Toilet Bowl, Pail Type, Porcelain, W/o Cover 1 Set 750.00 [ ] [ ] 23 Pvc Pipe, 82.55mm Outside Dia X T=3.75mm X L=3.0m Orange 13 Length 700.00 [ ] [ ] S-1000 24 Pvc Pipe, 107.10mm Outside Dia X T=3.81mm X L=3.0m Orange 1 Length 800.00 [ ] [ ] S-1000 25 Clean-out, Pvc, 107.10mm Dia Nominal Size, S-1000, W/ Cover And O-ring 1 Length 105.00 [ ] [ ] 26 Pvc Tee, Sanitary, Inside Dia: 107.10mm, S-1000, Orange 1 Piece 200.00 [ ] [ ] 27 Solvent Cement, Pvc (400cc/ml/can) 2 Can 280.00 [ ] [ ] 28 Paint, Reflectorized For Traffic 1 Gallon 2,000.00 [ ] [ ] Chlorinated Rubber Base, Yellow 29 Paint, Reflectorized For Traffic 3 Gallon 2,000.00 [ ] [ ] Chlorinated Rubber Base, White 30 Paint, Reflectorized For Traffic 1 Gallon 2,000.00 [ ] [ ] Chlorinated Rubber Base, Black 31 Acrylic Spray Paint, Flat Black(400cc/can) 2 Can 175.00 [ ] [ ] 32 Acrylic Spray Paint, Maroon(400cc/can) 1 Can 175.00 [ ] [ ] 33 Acrylic Spray Paint, Yellow(400cc/can) 1 Can 175.00 [ ] [ ] 34 Acrylic Spray Paint, Blue(400cc/can) 1 Piece 175.00 [ ] [ ] 35 Acrylic Spray Paint, Red(400cc/can) 1 Can 175.00 [ ] [ ] 36 Acrylic Spray Paint, Green(400cc/can) 1 Can 175.00 [ ] [ ] 37 Acrylic Spray Paint, Brown(400cc/can) 1 Can 175.00 [ ] [ ] 38 Latex Paint, Flat Yellow (l/can) 1 Can 189.00 [ ] [ ] 39 Latex Paint, Flat Red (l/can) 1 Can 189.00 [ ] [ ] 40 Paint, Enamel (gal), Flatwall, White 1 Gallon 749.00 [ ] [ ] 41 Concrete Neutralizer (lit)), 1 Liter 63.00 [ ] [ ] 42 Epoxy Primer , Gray With Catalyst 3 Gallon 1,300.00 [ ] [ ] 43 Steel Brush, Wood/plastic Handle 2 Piece 119.00 [ ] [ ] 44 Paint Brush, 100mm (4") Hair Type 2 Piece 70.00 [ ] [ ] 45 Paint Brush, 50mm (2") 2 Piece 24.00 [ ] [ ] Hair Type 46 Paint Roller W/ Handle, 175mm 2 Piece 56.00 [ ] [ ] 47 Paint Roller, 75mm W/ Handle 2 Piece 45.00 [ ] [ ] 48 Paint Tray, Plastic 2 Piece 49.00 [ ] [ ] 49 Gloves, Rubber & Cloth Combination For Construction 15 Piece 50.00 [ ] [ ] Good Quality 50 Rainboots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality, Size: 8 1 Pair 420.00 [ ] [ ] 51 Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, White 1 Piece 476.00 [ ] [ ] 52 Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Blue 2 Piece 476.00 [ ] [ ] 53 Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 2 Piece 476.00 [ ] [ ] 54 Spectacles, Safety Goggles, Clear 20 Piece 140.00 [ ] [ ] 55 Vest, Reflectorized, Safety, Green 2 Piece 252.00 [ ] [ ] 56 Vest, Reflectorized, Safety, Orange 2 Piece 252.00 [ ] [ ] 57 Caution Tape, Yellow, 3 Inches X 1,000 Feet 1 Roll 1,400.00 [ ] [ ] 58 Danger Tape, Red, 3 Inches X 1,000 Feet 1 Roll 1,400.00 [ ] [ ] 59 Sticker, Reflectorized, 50mm Wide, 10m/roll, Red 1 Roll 2,030.00 [ ] [ ] 60 Sticker, Reflectorized, 50mm Wide, 10m/roll, Yellow 1 Roll 2,030.00 [ ] [ ] 61 Sticker, Reflectorized, 50mm Wide, 10m/roll, White 1 Roll 2,030.00 [ ] [ ] 62 Mask, Non- Woven Synthetic Fibre Disposable Masks, Ffp1, Moulded Mask, Nose Clip For Adjustment, Foam Edge Under Nose Clip, Ce, En149 (20 Pcs/box) 2 Box 560.00 [ ] [ ] 63 Asphalt Cement, Grade 60/70/d (5 Gal/pail) 1 Pail 2,520.00 [ ] [ ] 64 Nylon, # 100 5 Kilo 490.00 [ ] [ ] 65 Chlorinated Rubber Base Reducer, 4l 1 Gallon 770.00 [ ] [ ] 66 Boots, Rain, Rubber, Size: 7" 1 Pair 420.00 [ ] [ ] Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality 67 Boots, Rain, Rubber, Size: 9" 1 Pair 420.00 [ ] [ ] 68 Boots, Rain, Rubber, Size: 6" 1 Pair 420.00 [ ] [ ] Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality ***nothing Follows*** ( Supplier Must Provide Complete Data For The Information Required Below ) Delivery Period Warranty Place Of Delivery Signature Over Printed Name Designation Name Of Business Address Telephone/mobile/fax No Email Address
Closing Soon5 Nov 2024
Tender AmountPHP 583.6 K (USD 10 K)
City Government Iligan Tender
Civil And Construction...+1Building Construction
Philippines
Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund Intend To Apply The Sum Of P 2,898,505.28 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City With Project No. Cb(b)-24-128 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Icadac Permanent Office, Brgy. Pala-o Iligan City • General Requirements *permits & Clearances; *installation Of Project Billboard,2 Sets; *occupational Safety & Health Program; • Removal Of Structures, Obstructions, Clearing & Grubbing *existing Concrete Structures; *cutting Of Trees •earthworks *excavation For Foundation ,tie Beam, Zocalo, Catch Basin, Wall-footing & Septic Vault; *backfilling & Compaction For The Slab On Grade; *gravel Bedding For Foundation ,slab On Grade, Tie Beam, Zocalo, Wall-footing, Septic Vault, & Catch Basin; • Concrete Works, Forms & Scaffoldings *concrete Pouring For Foundation, Columns, Tie Beam, Roof Beams, Septic Vault Flooring (top & Bot), Zocalo (foundation), Ramp Flooring , Wall-footing (foundation), Slab On Grade, & Catch Basin Flooring (top & Bot); • Masonry Works *installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor ,wall-footing , Septic Vault, Catch Basin,& Zocalo, W/plaster Finish,& Smooth On Expose Areas; *using 10mmø X 6m Deformed Steel Bars W/#16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @ 3rd Layer; • Steel Reinforcement *using 10mmø, 12mmø,& 16mmø Deformed Steel Bars W/#16 G.i Tie Wire; • Paint Works & Finishes; *skim Coating & Paint Works For All Wallings And Columns At Ground Floor; •tinsmithry Works *installation Of 0.4mm Thk. Colored Root Long-span Rib Type,0.4mm Thk. Pre-fab Flashing Gutter,0.4mm Thk. Pre-fab Fascia Cover, & 0.30m X 2.40m X 0.4mm Thk . Pre-fab Colored Gutter Spanish Type W/complete Accessories; • Ceiling Works *installation Of 4' X 8' X 4.5mm Thk. Fiber Cement Board (fcb) Including 19mm X 50mm X 0.5mm Thk. Double Furring W/complete Accessories ; • Tile Works *installation Of 300mm X 300mm Non-skid Ceramic Floor Tiles, 300mm X 600mm Ceramic Wall Tiles W/pvc Tile Trim & 600mm X 600mm Floor Tiles; • Doors & Windows *installation Of Pre-fab Wooden Panel Door & Flush Door W/complete Accessories; & Aluminum Glass Door; *installation Of Fixed, Sliding & Awning Glass Window On Aluminum Frame W/complete Accessories; • Electrical Works; *installation Of Electrical Wirings , Connections W/complete Accessories & Fixtures; • Plumbing Works *installation Of Pvc Pipes, Fittings & G.i Pipes; *installation Of G.i Basket Strainer, Pipe Strap/clip W/nut & Washer For 3"ø Pipe (downspout); *installation Of Plumbing Fixtures Such As, Water Closet, Lavatory, Stainless Floor Drain, Stainless Wall Faucet, *installation Of Motor Pump, Water Meter, Check Valve, Gate Valve & Stainless Handrail Grab-bar; • Steel Works *fabrication & Installation Of 2" X 6" X 1.20mm Thk. Channel For Steel Trusses & Web Members, 1" X 1" X 4.0mm Thk. Angle Bar & 1" X 3.0mm Thk. Flat Bar For Steel Fascia Frame; *installation Of 2" X 4" X 1.0mm Thk. C-purlins W/ 10mmø Sagrods And Installation Also Of 6mm Thk. Base Plate And Must Be Full Weld On Steel Trusses At The Top Of The Column W/4-10mmø Anchor Bolt W/ Nut & Washer To Be Full Weld On Vertical Bars; *installation Of 1-1/2"ø Stainless Steel Pipe Railings- Grade 304 For Ramp Only; *all Steel Works Must Be Coat With Epoxy Primer; I. Permit & Clearances (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)- 6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv. Mobilization & Demobilization (q = 1.00 Lot) V. Removal Of Structures, Obstructions & Clearing & Grubbing (q = 1.00 Lot) Includes Existing Concrete Structures, Cutting Of Trees. Vi. Earthworks (q = 78.01 Cu.m.) Includes Volume To Be Excavated, Volume To Be Backfilled/re-use, Pit Run Soil/earthfill, Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 25.98 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/2" Thk. Ordinary Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 231.21 Sq.m.) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix. Steel Reinforcements (q = 2,720.67 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, #16 G.i Tie Wire. X. Steel Works (q = 1,027.28 Kg/s) Includes 2" X 6" X 1.20mm Thk. Channel (rafter/truss) - 32pcs, 1" X 1" X 4.0mm Thk. Angle Bar - 18pcs, 1" X 3.0mm Thk. Flat Bar - 8pcs, 2" X 4" X 1.0mm Thk. C-purlins - 36pcs, Sagrods-10mmø X 6mm Dsb- 6pcs, 1-1/2"ø X 6m X 1.2mm Thk. Stainless Steel Pipe- Grade 304, 4' X 8' X 6mm Thk. Mild Steel Plate, 10mmø Anchor Bolt (l-type) W/5% Wastage, Welding Rod (6011), Stainless Welding Rod, Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi. Tinsmithry ( Q = 127.92 Sq.m.) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored Ridge Roll, 0.4mm Thk. X 8', Pre-fab Colored Flashing Gutter, 0.4mm Thk. X 8', 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover, 0.4mm Thk. X 8', Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes ( Q = 336.30 Sq.m.) Includes Skim Coat, Neutralizer, Flat Latex Primer, Masonry Putty, Top Coat (1st & 2nd Coat), Baby Roller #4 Mini, Tray Paint, Paint Brush 2", Sand Paper. Xiii . Ceiling Works (q = 80.00 Sq.m.) Includes 4' X 8' X 4.5mm Thk. Fcb, A = 80.00 Sq.m; 19mm X 50mm X 0.5mm Thk. X 5m Double Furring; W-clip; Blind Rivets (1000pcs/box); 1" X 3mm Screw; 300mm X 300mm Wall Exhaust Fan; Concrete Nails; Aviation Metal Snip Scissor; Riveter. Xiv. Tile Works (q = 107.00 Sq.m.) Includes 600mm X 600mm Ceramic Floor Tiles, A= 76.79 Sq.m; 300mm X 300mm Non Skid Ceramic Floor Tiles, A = 6.81 Sq.m; 300mm X 600mm Ceramic Wall Tiles, A = 23.40 Sq.m; Pvc Tile Trim, 6mm X 2.40m; Tile Adhesive, Heavy Duty; Tile Grout; Portland Cement; Washed Sand; Tile Cutter Disc. Xv. Doors & Windows ( Q = 28.00 Set/s) Includes D1: 1-panel, 1000mm X 2100mm Aluminum Push & Pull Glass Door W/complete Accessories; D2: D2: 900mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D3: D3: 800mm X 2100mm Pre-fab Wooden Panel Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Steel Hinges & Heavy Duty Door Knob); D4: 700mm X 2100mm Flush Door W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 3 Sets Steel Hinges & Heavy Duty Door Knob); Ds: 1000mm X 2100mm Pre Fab Flush Door W/ss Kick Plate & Louver W/complete Accessories, (2" X 6" Door Jamb, Kiln Dried, 4 Sets Of Steel Hinges & Heavy Duty Lever Type Door Knob); W1: 2-panels, 1200mm X 1600mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W2: 3-panels, 1200mm X 2300mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W3: 4-panels, 1200mm X 3100mm Sliding Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (flush Lock - Heavy Duty); W4: 1-panel, 1100mm X 1200mm Fixed Window W/complete Accessories On Aluminum Frame W/complete Accessories; Ws: 1-panel, 300mm X 300mm Awning Glass Window W/complete Accessories On Aluminum Frame W/complete Accessories (2pcs Stainless Hinges & Heavy Duty Cam Handle Lock) Xvi. Electrical Works (q = 1.00 Lot) Includes Service Entrance Cap,1" 1/2 Ø; Emt Pipe,1"1/2 X10'; Secondary Rack W/spool Insulator,2-pole,w/ Screws; Grounding Rod,10ft,1/2", Copper Plated; Ground Clamp, 1/2", Copper Plated; Panel Board Tqd 2-pole Main, 12 Branches 2-pole Tqc, Bolt-on; Moulded Case Circuit Breaker, 150at,2p, 30kaic @ 415vac; Circuit Breaker, 15a,bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 20a, Bolt-on, 2pole, 220v, 60hz; Circuit Breaker, 30a, Bolt-on, 2pole, 220v, 60hz; Grounding Busbar, Copper; Cu Wire, 2.0mm2,thhn/ Thwn-2, Stranded; Cu Wire, 3.5mm2, Thhn/thwn-2, Stranded;cu Wire,;5.5mm2,thhn(thwn-2,;stranded; Cu Wire, 14mm2,thhn(thwn-2, Stranded; Cu Wire, 50mm2,thhn(thwn-2, Stranded; Switch,16a,spst,w/plate,1-gang; Switch, 16a,spst,w/plate, 2-gang; Switch, 16a,spst,w/plate, 3-gang; Duplex Universal Outlet W/ Ground & Shutter Set, 250vac, 15a; Aircon Outlet W/ Ground, 1gang, 20a; Utility Box,4x2x1.5 In, Pvc; Led Panel Light, 40 Watts, 40001m,30x30 Cm,220-240vac; Led Panel Light,72 Watts, 59001m, 120x60 Cm,220-240vac; Led Round Recessed Pinlight Housing W/ Beehive Reflector W/ Glass Cover,e27 Fixture,6"; Led Bulb, Lw,e-27; Junction Box With Cover And Screws,pvc; Pvc Flexible Hose 1/2" X 100 Meters Corrugated Flex Pipe Fire; Pvc Conduit Pipe,15mm Dia X 3m; Solvent Cement 100cc; Assorted Pvc Connectors; Electrical Tape 3/4" X20yds. Xvii. Plumbing Works (q = 1.00 Lot) Includes 4" Dia. X 10' Pvc Pipe S-1000; 4" Dia. Pvc Sanitary Wye, S-1000; 4" Dia. Pvc Sanitary Tee, S-1000; 4" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 4" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 4" X 2" Sanitary Tee; 4" Dia. Pvc Clean Out W/adapter & Plug; 3" Dia. X 10' Pvc Pipe S-1000; 3" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 3" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); 3" Dia. Pvc Clean Out W/adapter & Plug; 3" X 2" Pvc Sanitary Wye; Pvc Pipe Strap/clip; Bolt (54pcs), Nut (54pcs) And Washer (54pcs); 2" Dia. X 10' Pvc Pipe S-1000; 2" Dia. Pvc Tee; 2" Dia. Pvc Cross Tee; 2" Dia. Pvc P-trap; 2" Dia. Pvc Elbow, 1/4 Bend (90 Deg.); 2" Dia. Pvc Elbow, 1/8 Bend (45 Deg.); Pvc Cement, 400cc; 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line; 1/2" Diam. G.i Threaded Pipe Elbow, 90deg.; 1/2" Diam. G.i Threaded Pipe Tee; 1/2" Diam. G.i Threaded Union Patente; G.i Basket Strainer;4" X 4" Stainless Floor Drain; Water Closet W/complete Fittings/accessories-heavy Duty; Lavatory -heavy Duty; Stainless Water Faucet (for Lavatory), W/complete Accessories-heavy Duty; Wall Faucet, W/complete Accessories-heavy Duty; Stainless Steel Pwd Handrail Grab Bar-grade 304 W/complete Accessories; 1hp Motor Pump, Heavy Duty; Water Meter-heavy Duty; Gate Valve-heavy Duty; Check Valve Heavy Duty; Teflon Tape, 3/4" X 10m. Approved Budget For The Contract (abc): P 2,898,505.28 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Forty (140) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: October 29 – November 19, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 5, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 19, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: October 29, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-128 (ceo-infra)
Closing Date19 Nov 2024
Tender AmountPHP 2.8 Million (USD 50 K)
City Of Bayawan Tender
Civil And Construction...+1Construction Material
Philippines
Details: Description Invitation To Bid The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers / Distributors / Contractors To Bid For The Hereunder Projects: Lot No. I Cement And Additives 1 1075 Bag Cement, Portland (40kgs/bag), Type 1 Lot No. Ii Aggregates 2 114 Cu.m. Sand, Washed Mixing/screened 3 83 Cu.m. Round Gravel, (screened & Washed), Max. Size 20mm Dia 4 15 Cu.m. Round Gravel, (screened & Washed), Max. Size 38mm Dia Lot No. Iii Bar And Rebar 5 1228 Length Deformed Steel Bar, 10mm Ø X 6m, Grade 33 6 59 Length Deformed Steel Bar, 12mm Ø X 6m, Grade 33 7 526 Length Deformed Steel Bar, 16mm Ø X 6m, Grade 40 8 130 Length Deformed Steel Bar, 20mm Dia X 6m Grade 40 9 4 Length Angle Bar, 6mm X 38mm X 38mm X 6m 10 26 Length Angle Bar, 6mm X 50mm X 50mm X 6m) Lot No. Iv Commercial Lumber 11 15 Piece Lumber, G-melina Mahogany And Equivalent 50mm X 50mm X 2.4m 12 15 Piece Lumber, G-melina Mahogany And Equivalent 50mm X 75mm X 2.4m 13 8 Piece Commercial Lumber, G-melina, Mahogany And Equivalent, 50mm X 75mm X 3.0m Lot No. V Construction Tools And Devices 14 35 Piece Shoring Jack, G.i. S40 Inner Pipe: 40mm X Outer Pipe: 50mm Up To 3.4m Full Extension 2.2 Tons Load Cap. Heavy Duty Lot No. Vi Cutting Tools And Supplies 15 2 Tank Acetylene Gas , Refill 16 1 Tank Oxygen Gas , Refill 17 3 Piece Drill Bit, Masonry 3/16" Dia 18 3 Piece Drill Bit, 3/16" Dia. For Steel 19 3 Piece Drill Bit, Masonry, 1/4" Dia 20 3 Piece Drill Bit, 1/4" Dia. For Steel Lot No. Vii Steel Sheets And Mesh 21 14 Sheet Steel Deck, Effective Width=0.995m, Ga. Thickness=0.80mm, Length=1.85m 22 21 Sheet Steel Deck, Effective Width=0.995, Ga. Thickness=0.80mm, Length=3.5m 23 3 Sheet Steel Plate, G.i., Gauge # 18 X 1.20m X 2.40m 24 1 Sheet Steel Plate, 10mm X 1.2m X 2.4m 25 3 Liner Meter Screen/mesh Wire, 3mm Eyehole X 0.90m Width (m) Lot No. Viii Electrical Supplies And Materials 26 1 Pack Cable Tie, 250mm (100pcs/pack) Long 27 1 Piece Pvc Tee, 57.15mm Dia Orange Inside Dia., Sanitary, S-1000 28 2 Pack C-clamp/clip, Pvc, 20mm Diameter, With Concrete Nails (100s/pack) 29 1 Pack C-clamp/clip, Pvc, 25mm Diameter, With Concrete Nails (100s/pack) 30 45 Piece Junction Box, 100mm X 100mm, W/ Cover & Screw, Octagonal 31 5 Set Square Box, Pvc, 150mm X 150mm X 100mm With Cover & Screw 32 40 Piece Utility Box, Pvc, 50mm X 100mm, Flush Type 33 60 Length "electrical Pvc Pipe, 20mm Dia X 3m Thickwall Orange " 34 40 Length Electrical Pvc Pipe, 25mm Dia X 3m Orange Thickwall 35 2 Length "electrical Pvc Pipe, 32mm Dia X 3m Thickwall Orange " 36 1 Pack "pipe Connector, Pvc, Electrical, 20mm Dia (100s/pack) " 37 1 Pack "pipe Connector, Pvc, Electrical, 25mm Dia (100s/paclk) " 38 2 Piece Service Entrance Cap, Size 32mm Dia, Clip Type 39 1 Piece Ground Rod, Steel Galv. 16mm Dia X 3m W/ Ground Clamp 40 3 Set Secondary Rack, W/ Single Spool Insulator Medium 41 7 Roll Electrical Tape, Vinyl, 177mm X 3/4inch / 19mm X 16m, Flame Retardant, 600v 42 150 Meter Service Drop Wire, # 4 Awg (m) 43 6 Piece Service Grip Wire, # 4 44 25 Meter "thw Wire, # 6 (14mm2) Stranded(m) Black " 45 25 Meter Thw Wire, # 6 (14mm2) Stranded(m) White 46 30 Meter Thw Wire, # 8 (8mm2) Stranded (m) Green 47 1 Roll Thw Wire, # 8 (8mm2), Stranded (150m/roll), Black 48 4 Roll Thw Wire,, #12 (3.5mm2), Stranded (150m/roll), Black 49 4 Roll Thw Wire, #12 (3.5mm2), Stranded (150m/roll), White 50 1 Roll Thw Wire, #12 (3.5mm²), Stranded (150m/box), Green 51 8 Piece Downlight, Lighting Fixture, Led, Round , 15w, Surface Slim Type, 220v, Day Light 52 13 Piece Downlight, Lighting Fixture, Led, Round, 24w, Surface Slim Type, 220v, Day Light 53 1 Set Kw-hr Meter, Digital, Class 200, 240v, Single Phase, 4 Jaws, 2-wire With Socket, Edmi Type 54 1 Set Distribution Panel Board, Cen. Main, 100a, Bolt-on Type, 2 Pole, Branches 10 Units, Single Phase, Flush Type 55 22 Set Convenience Outlet, Flush Type 2 Gang 3 Prong Grounding W/ Plates Bracket Cover & Screw Universal Type H. Duty 56 5 Set Switch, Light, Flush Type, Single Gang, W/ Plate, Bracket, Cover & Screw 57 5 Set Switch, Light, Flush Type, 2 Gang, With Plate, Bracket, Cover & Screw 58 2 Set Switch, Light, 3 Way, Flush Type, W/ Plate, Bracjket, Cover & Screw, Single Gang 59 4 Piece Circuit Breaker, 15a 2 Pole Bolt-on 60 4 Piece Circuit Breaker, 20a 2 Pole Bolt-on 61 1 Piece Circuit Breaker, 30a 2 Pole Bolt-on 62 1 Piece Circuit Breaker, 60a 2 Pole Bolt-on 63 1 Set Circuit Breaker, 100a, 2 Pole, W/ Nema 3r Metallic Enclosure Lot No. Ix Glass, Door And Window Supplies 64 2 Set Door Knob, Chrome Polished Adjustable Tubular Latch Type, Good Quality 65 3 Set Hinges, Steel 100mm X 100mm Loose Pin W/ Screws Excellent Quality 66 39 Lot "fixed Window Glass, Labor And Materials - , Height: 1.96m, Width: 0.97m, 1/4"" Tempered Glass Bronze, Aluminum Frame (analok), With Complete Accessories " 67 35 Lot Awning Type Window Glass, Labor And Materials - Width: 0.97m X Height: 0.42m, 1 Panel With U Bars Hinge, 1/4", Tempered Glass Bronze, Aluminum Frame (analok), With Complete Accessories 68 4 Lot Awning Type Window Glass, Labor And Materials - Width: 0.97m X Height: 0.37m, 1 Panel With U Bars Hinge, 1/4", Tempered Glass Bronze, Aluminum Frame (analok), With Complete Accessories 69 7 Lot "awning Type Window Glass, Labor And Materials - Width: 0.98m X Height: 0.66m, 1 Panel With U Bars Hinge, 1/4"", Tempered Glass Bronze, Aluminum Frame (analok), With Complete Accessories " 70 4 Lot Glass Door, Labor And Materials - Single Swing, H=2.10m X W=0.97m, Aluminum Frame, Analok, 6mm Thk. Tempered Glass Bronze W/ Complete Access. Lot No. X Paints, Tools And Supplies 71 1 Can Epoxy, (a And B), 1/4 Liter/can 72 2 Gallon Enamel Paint, Flatwall, White 73 6 Can Acrylic Spray Paint, Flat Black(400cc/can) 74 2 Can Acrylic Spray Paint, Maroon(400cc/can) 75 2 Can Acrylic Spray Paint, Yellow(400cc/can) 76 2 Can Acrylic Spray Paint, Blue(400cc/can) 77 2 Can Acrylic Spray Paint, Red(400cc/can) 78 2 Can Acrylic Spray Paint, Green(400cc/can) 79 2 Can Acrylic Spray Paint, Brown(400cc/can) 80 2 Can Latex Paint, Flat Yellow (l/can) 81 2 Can Latex Paint, Flat Red (l/can) 82 3 Piece Paint Brush, 50mm (2") Hair Type 83 3 Piece Paint Brush, 100mm (4") Hair Type 84 3 Piece Paint Roller, 175mm (7") W/ Handle) Lot No. Xi Personal Protective Equipment 85 4 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 6 86 4 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 7 87 4 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 8 88 4 Pair Rain Boots, Worker/construction Boots, Waterproof Pvc Non Slip, High Cut, Good Quality Size: 9 Lot No. Xii Plumbing Supplies 89 24 Length Gi Pipe, 50mm Dia X 6m Sched 40 Wt=4.0mm Outside Dia= 60.30 5.553kg/m Heavy Gauge 90 30 Length Gi Pipe, 65mm Dia X 6m Sched 40 Wt=5.20mm Outside Dia= 73.00 8.694kg/m Heavy Gauge 91 2 Length Gi Pipe, 80mm Dia X 6m Sched 40 Wt=5.50mm Outside Dia= 88.90 11.312kg/m Heavy Gauge 92 2 Set Water Closet, W/ Fittings & Complete Access. Jumbo Size White 93 2 Set Lavatory, White, Wall Hung, With P-trap, Faucet, 1/2" X 1/2" Flexible Hose And Angle Valve And Expansion Bolts 94 2 Set Bidet Spray, Pvc W/ Complete Accessories 95 2 Set "urinal, Wall Hung W/ Fittings & Complete Accessories " 96 2 Piece Faucet, Stainless, 20mm Outside Dia, One Way Type (on/off), Good Quality 97 2 Piece Floor Drain, 100mm X 100mm Dia, Stainless 98 10 Length Pipe, Upvc, 20mm Outside Dia, Wt=1.8min, L=3.0m, Blue 99 18 Piece Upvc Elbow, 20mm Inside Dia X 90 Deg. Bend Plain Blue 100 4 Piece Upvc Elbow, 20mm Inside Dia X 90 Deg. Bend One End Threaded Blue 101 10 Piece Tee, Upvc, 20mm Inside Dia, Blue 102 9 Length Pipe, Pvc, 57.15mm Outside Dia X T=2.54mm X L=3.0m, S-1000, Orange 103 4 Piece Pvc Elbow, 57.15mm Dia X 45 Deg Bend Orange S-1000 104 6 Piece Pvc Elbow, 57.15mm Dia X 90 Deg. Bend Orange S-1000 105 4 Piece Pvc Wye, 57.15mm Dia Orange Inside Dia, S-1000 106 8 Length Pvc Pipe, 107.10mm Outside Dia X T=3.81mm X L=3.0m Orange S-1000 107 4 Piece Pvc Wye, 57.15mm Dia Orange Inside Dia., S-1000 108 3 Piece Pvc Elbow, 107.10mm Inside Dia X 90 Deg. Bend Orange S-1000 109 9 Piece Pvc Elbow, 107.10mm Inside Dia X 45 Deg. Bend Orange S-1000 110 5 Piece Pvc Tee, Sanitary 107.10mm Dia Orange Inside Dia., S-1000 111 8 Piece Pvc Clean-out, 107.10mm Dia W/ Cover Nominal Size, With O-ring, S-1000 112 1 Can Solvent Cement, Pvc (1lit/can) 113 1 Can Solvent Cement, Pvc (250cc/can 114 2 Can Solvent Cement, Pvc (500 Cc/can) Lot No. Xiii Roof, Wall And Ceiling Supplies 115 35 Length C-purlins, 1.2mm X 50mm X 75mm X 6.0m 116 30 Meter Sack Cloth, 3.0m Width (m) Blue 117 10 Sheet "roofing, Long Span, Curve Roof, Rib Type, Min. T=.40mm, Min. Eff. W=1.040m, Min Rib H=22mm, L=6.25m, Color: Terracotta Orange " 118 10 Sheet "roofing, Long Span, Curve Roof, Rib Type, Min. T=.40mm, Min. Eff. W=1.040m, Min Rib H=22mm, L=9.00m, Color: Terracotta Orange " 119 20 Sheet Corrugated Sheet, G.i. 0.27mm X 3.0m) Lot No. Xiv Steelwork Supplies And Devices 120 5 Box Rod/electrode, Welding, E6013, 1/8" (bx)) (matchless Quality, Iso 9001, 2000 Certified, 20 Kg/box) Lot No. Xv Carpentry Tools And Supplies 121 21 Sheet Phenolic Board, 12mm X 1.22m X 2.44m 122 16 Sheet Plywood, Marine, 4.5mm X 1.2m X 2.4m, Type I, Grade A/a 123 20 Piece Scaffolding Clamp, Swivel 50mm X 50mm 124 24 Piece Adjustable Base Jack, 32mm X 400mm 125 299 Kilo Tie Wire, # 16 126 492 Piece Blade, Hacksaw, 12mm X 300mm, 18tpi, (excellent Quality) 127 2 Kilo Nails, Common Wire, 38mm 128 6 Kilo Nails, Common Wire 62mm 129 10 Kilo Nails, Common Wire, 100mm (4") 130 5 Kilo Nails, Umbrella/roofing, 62mm 131 3 Pack "sealant, Elastomeric/roof (1/4kg/pk) " 132 2 Can Sealant, Elastomeric/roof (1 Liter/can) 133 1 Box Blind Rivets, 3mm Dia. X 9mm Long (1000 Pcs/box) 134 7 Kilo Welding Rod, E6013, 1/8"ø (kg) (matchless Quality, Iso 9001, 2000 Certified) Electrode 135 20 Pair Gloves, Working, Rubber & Cloth Combination, Good Quality 136 1 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, White 137 6 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Blue 138 10 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 139 1 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Green 140 15 Piece Safety Glasses, Smoke, Polycarbonate Single Lens Glasses, Soft Flat Spatula Type Arms, Integrated Polycarbonate Nose Piece, Easy To Use With Safety Helmet And Ear Defenders, Side Protection, Uv 400, Anti-scratch, Ce, Ansi Z87.1, En166, En172 Lot No. Xvi Bolt And Screw 141 1150 Piece "tex Screw, 63mm For Steel " 142 8 Set Lag Screw, 3/16" Dia. X 1-1/2" With Expansion Shield 143 52 Piece Anchor Bolt, 12mm Dia X 37.5mm X 125mm, W/ Nut & Washer 144 100 Piece Gypsum Screw, 3.5mm Dia X 25mm (pc) Lot No. Xvii Other Supplies 145 1 Kilo Nylon, # 100 146 1 Set Toilet Bowl, Pail Type, Porcelain, W/o Cover 147 5 Roll Tape, Thread Seal, 20mm X 10m 148 10 Piece Vest, Reflectorized, Safety, Green 149 10 Piece Vest, Reflectorized, Safety, Orange 150 2 Roll Caution Tape, Yellow, 3 Inches X 1,000 Feet 151 2 Roll Danger Tape, Red, 3 Inches X 1,000 Feet 152 1 Roll "sticker, Reflectorized, 50mm Wide, 10m/roll, Red " 153 1 Roll Sticker, Reflectorized, 50mm Wide, 10m/roll, Yellow 154 1 Roll Sticker, Reflectorized, 50mm Wide, 10m/roll, White *** Nothing Follows *** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php 5,000.00 Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule Issuance Of Bid Documents October 15, 2024 To November 4, 2024@ 5:00 P.m. Pre-bid Conference October 22, 2024@ 9:00 Am Deadline/opening Of Bids November 5, 2024@ 9:00 Am Post Qualification November 12, 2024@ 9:00 Am Awarding Of Bids November 21, 2024@ 9:00 Am Approved: (sgd)virginia D. Sadiasa City Civil Registrar Bac Chairman
Closing Soon5 Nov 2024
Tender AmountPHP 3 Million (USD 52.6 K)
Municipality Of Tiaong, Quezon Tender
Civil And Construction...+2Civil Works Others, Machinery and Tools
Philippines
Details: Description B.5 Project Billboard/signboard Quantity: 1.00 Each Materials: Ordinary Plywood ( 1/2" X 4' X 8') 2.00 Pcs. Coco Lumber (2" X 3" X 12') 5.00 Pcs. Tarpaulin (4' X 8') 1.00 Unit Assorted Cwn 1.00 Kg. Labor: 1 Carpenter 0.50 Day 2 Laborer 0.50 Day B.7 Construction Safety And Health Quantity: 1.00 Lot Materials Safety Helmet 10.00 Pc(s) Hand Gloves 10.00 Pair(s) Safety Shoes 10.00 Pair(s) Misc (medicine, Medicine Cabinet, Water, First Aid Kit) 1.00 Lot Labor 1 Safety Officer 15.00 Days 1 First Aide 15.00 Days 803(1)a Structure Excavation Quantity 105.74 Cu.m Labor 1 Foreman 2.00 Days 3 Laborer 2.00 Days Equipment 1 Backhoe (0.80 Cu.m) 6.00 Hour 2 Dump Truck (12 Cu.yd) 6.00 Hour 804(1)a Embankment From Structure Excavation Quantity 63.01 Cu.m Labor 1 Foreman 2.00 Days 3 Laborer 2.00 Days Equipment 1 Backhoe (0.80 Cu.m) 5.00 Hour 1 Plate Compactor 5.00 Hour 804(2)a Embankment From Borrow Quantity 31.06 Cu.m Materials Common Borrow 31.06 Cu.m Labor 1 Foreman 1.00 Day 3 Laborer 1.00 Day Equipment 1 Backhoe (0.80 Cu.m) 3.00 Hour 1 Plate Compactor 3.00 Hour 804(7) Gravel Fill Quantity 9.88 Cu.m Materials Gravel Fill 10.37 Cu.m Labor 1 Foreman 2.00 Days 3 Laborer 2.00 Days Equipment 1 Plate Compactor 4.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 900(1)d Structural Concrete (4000 Psi, Class A, 28 Days) Quantity 75.15 Cu.m Materials Ready Mix Concrete 4000psi @ 28 Days 75.15 Cu.m Labor 1 Foreman 3.00 Days 2 Skilled Laborer 3.00 Days 6 Laborer 3.00 Days Equipment 2 Concrete Vibrator 20.00 Hour 1 Pumpcrete 10.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 900(1)c Structural Concrete (3000 Psi, Class A, 28 Days) Quantity 72.39 Cu.m Materials Ready Mix Concrete 3000psi @ 28 Days 72.39 Cu.m Labor 1 Foreman 3.00 Days 2 Skilled Laborer 3.00 Days 6 Laborer 3.00 Days Equipment 2 Concrete Vibrator 19.00 Hour 1 Pumpcrete 10.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 902(1)a1 Reinforcing Steel (deformed) Grade 40 Quantity 4,394.58 Kg Materials Reinforcing Steel Bars Deformed Grade 40 4,395.00 Kg Gi Tie Wire #16 66.00 Kg Labor 1 Foreman 4.00 Days 3 Skilled Laborer 4.00 Days 12 Laborer 4.00 Days Equipment 1 Bar Cutter 15.00 Hour 1 Bar Bender 15.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 902(1)a2 Reinforcing Steel (deformed) Grade 60 Quantity 9,497.63 Kg Materials Reinforcing Steel Bars Deformed Grade 60 9,497.63 Kg Gi Tie Wire #16 142.46 Kg Labor 1 Foreman 9.00 Days 3 Skilled Laborer 9.00 Days 12 Laborer 9.00 Days Equipment 1 Bar Cutter 33.00 Hour 1 Bar Bender 33.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 903(2) Formworks And Falseworks Quantity 322.99 Sq.m Materials Phenolic Board - 1.22m X 2.44m X 18mm 113.00 Pc Good Lumber 509.00 Bd.ft Consumables (1% Of Materials Cost) 1.00 Lot Labor 1 Foreman 7.00 Days 4 Skilled Laborer 7.00 Days 6 Laborer 7.00 Days Stripping 1 Foreman 2.00 Days 3 Laborer 2.00 Days Equipment 40 H-frame 1.7 M X 1.2m, Set 7.00 Days 2pcs H-frames 4pcs Diagonal Cross Braces 4pcs Horizontal Cross Braces 8pcs Joint Pins 62 Shoring Jack,3.8 M Full Extension 7.00 Days 80 Adj. U-head Jack, 0.60m 7.00 Days 80 Adj. Base Jack, 0.60m 7.00 Days 62 1-1/2" Gi Pipe X 6.0 M 7.00 Days 16 1-1/2" Gi Pipe X 3.0 M 7.00 Days 32 1-1/2" Gi Pipe X 4.0 M 7.00 Days 216 1-1/2" Gi Pipe X 1.0 M 7.00 Days 278 Tie Rod X 0.60m 7.00 Days 558 Round Wing Not 7.00 Days 1000(1) Soil Poisoning Quantity 23.02 Liter Materials Soil Poisoning 23.02 Lit Labor 1 Foreman 1.00 Day 1 Skilled Laborer 1.00 Day 2 Laborer 1.00 Day Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1046(2) Chb Non-load Bearing (including Reinforcing Steel) Quantity 231.35 Sq.m Materials Chb Ordinary (150mm X 230mm X 406mm) 2,947.00 Pcs Chb Ordinary (101mm X 203mm X 406mm) 61.00 Pcs Portland Cement 348.00 Bag Sand 10.00 Cu.m Reinforcing Steel Bars Deformed Grade 40 750.00 Kg Gi Tie Wire #16 12.00 Kg Labor 1 Foreman 10.00 Days 2 Skilled Laborer 10.00 Days 3 Laborer 10.00 Days Equipment 1 One Bagger Mixer (4-6 Ft³/min) 73.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1010(4) Wooden Doors And Windows Quantity 1.00 L.s. Materials Door Jambs 114.54 Bd.ft. Door Locks (schlage Or Equivalent) 8.00 Set Hinge (50mm X 101mm) 32.00 Pcs Consumables (5% Of Materials Cost) 1.00 Lot Labor 1 Foreman 3.00 Days 1 Skilled Laborer 3.00 Days 2 Laborer 3.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1010(2)a Doors (flush) Quantity 13.11 Sq.m Materials Flush Hollow Core Door 13.11 Sq.m Labor 1 Foreman 2.00 Days 1 Skilled Laborer 2.00 Days 1 Laborer 2.00 Days 1008(1)c Aluminum Glass Window (awning Type) Quantity 3.96 Sq.m Materials Aluminum Framed Glass Window (awning Type) 3.96 Sq.m Consumables (3% Of Materials Cost) 1.00 Lot Labor 1 Foreman 2.00 Days 1 Skilled Laborer 2.00 Days 1 Laborer 2.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1027(1) Cement Plaster Finish Quantity 462.69 Sq.m Materials Portland Cement 153.00 Bag Sand 13.00 Cu.m Labor 1 Foreman 4.00 Days 2 Skilled Laborer 4.00 Days 2 Laborer 4.00 Days Equipment 1 Power Throwel 33.00 Hr 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) Quantity 58.5 Sq.m Materials 4.5mm, Metal Frame, Fiber Cement Board 22.00 Pcs Metal Furring And Specifications ) 3m Length 67.00 Pcs Carrying Channels 21.00 Pcs Hanger Bars/rod 59.00 Pcs Channel Clip 351.00 Pcs Wall Angle 14.00 Pcs Rivets 819.00 Pcs 1" Metal Screw 234.00 Pcs Labor 1 Foreman 6.00 Days 1 Skilled Laborer 6.00 Days 2 Laborer 6.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1003(11)a1 Fascia Board (19mm, Fiber Cement Board) Quantity 310 M Materials Fiber Cement Board 310.00 M 1" Metal Screws 3,720.00 Pcs Consumables (3% Of Materials Cost) 1.00 Lot Labor 1 Foreman 6.00 Days 4 Skilled Laborer 6.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1038(1) Reflective Insulation Quantity 58.5 Sq.m Materials Reflective Insulation, 10 Mm Thk 58.50 Sq.m Consumables (5% Of Materials Cost) 1.00 Lot Labor 1 Foreman 2.00 Days 1 Skilled Laborer 2.00 Days 1 Laborer 2.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1018(1) Glazed Tiles And Trims Quantity 63.26 Sq.m Materials Ceramic Glazed Tiles 67.00 Sq.m Portland Cement 21.00 Bags Sand 2.00 Cu.m Tile Grout 8.00 Bags Tile Adhesive (25kg) 9.00 Bags Consumables (5% Of Material Cost) 1.00 Lot Labor 1 Foreman 6.00 Days 3 Skilled Laborer 6.00 Days 3 Laborer 6.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1018(2) Unglazed Tiles Quantity 18.85 Sq.m Materials Ceramic Unglazed Tiles 20.00 Sq.m Portland Cement 7.00 Bags Sand 1.00 Cu.m Tile Grout 3.00 Bags Tile Adhesive (25kg) 3.00 Bags Consumables (3% Of Material Cost) 1.00 Lot Labor 1 Foreman 2.00 Days 2 Skilled Laborer 2.00 Days 2 Laborer 2.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1032(1)a Painting Works (masonry/concrete) Quantity 642.86 Sq.m Materials Concrete Neutralizer 13.00 Gal Concrete Sealer/primer 26.00 Gal Patching Compound 33.00 Gal Paint Latex Semi Gloss (two Coats Only) 52.00 Gal Consumables (5% Of Materials Cost) 1.00 Lot Labor 1 Foreman 9.00 Days 2 Skilled Laborer 9.00 Days 4 Laborer 9.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1032(1)b Painting Works (wood) Quantity 261.27 Sq.m Materials Glazzing Putty 14.00 Gal Flat Wall Paint Enamel 11.00 Gal Enamel Quick Dry 11.00 Gal Paint Thinner 66.00 Gal Consumables (3% Of Materials Cost) 1.00 Lot Labor 1 Foreman 8.00 Days 2 Skilled Laborer 8.00 Days 4 Laborer 8.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1032(1)c Painting Works (steel) Quantity 309.97 Sq.m Materials Red Oxide Primer 13.00 Gal Flat Wall Enamel 31.00 Gal Paint Thinner 78.00 Liter Consumables (5% Of Materials Cost) 1.00 Lot Labor 1 Foreman 8.00 Days 2 Skilled Laborer 8.00 Days 3 Laborer 8.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1014(1)b2 Prepainted Metal Sheets (above 0.427mm) Rib Type Long Span Quantity 856.13 Sq.m. Materials Long Span Rib Type Colored Roof, Ga. 26 899.00 Sq.m. Tekscrew 8,562.00 Pcs Consumables (1% Of Materials Cost) 1.00 Lot Labor 1 Foreman 19.00 Days 4 Skilled Laborer 19.00 Days 8 Laborer 19.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1047(8)a Structural Steel (trusses) Quantity 7,385.80 Kg Materials Structural Steel Truss 7,385.80 Kg Acetylene 82.00 Kg Oxygen 163.00 Kg Welding Rod 148.00 Kg Consumables Materials (1% Of Matl. Cost) 1.00 Lot Labor 1 Foreman 14.00 Days 4 Skilled Laborer 14.00 Days 8 Laborer 14.00 Days Erection 3 Skilled Laborer 9.00 Days 3 Laborer 9.00 Days Equipment 1 Welding Machine, Electric Driven/dc Output, 500 Amp 25.00 Hours 1 Cutting Outfit 19.00 Hours 1 Truck Mounted Crane, 21-25 Mt, 200 Hp 22.00 Hours 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1047(8)b Structural Steel (purlins) Quantity 6,191.24 Kg Materials Structural Steel Purlins 6,501.00 Kg Welding Rod 124.00 Kg Consumables (1% Of Materials Cost) 1.00 Lot Labor 1 Foreman 9.00 Days 4 Skilled Laborer 9.00 Days 8 Laborer 9.00 Days Equipment 2 Welding Machine, Electric Driven/dc Output, 500 Amp 9.00 Hour 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1047(5) Metal Structure Accessories Quantity 2,865.07 Kg Materials Steel Plates 2,306.02 Kg Sagrod With Nuts & Bolts 243.38 Kg Cross Bracing 315.67 Kg 16mm Ø Turn Buckles 40.00 Pc Anchor Bolt 20mm Ø X 16" 88.00 Ea Consumables (1% Of Materials Cost) 1.00 Lot Labor 1 Foreman 14.00 Days 2 Skilled Laborer 14.00 Days 4 Laborer 14.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1013(2)b Fabricated Metal Roofing Accessory (flashing, Ga. 26) Quantity 50.04 L.m Materials Pre-painted Flashing, Ga.24 (0.701mm) X 2.44mm 53.00 M Blind Rivets 951.00 Pc Consumables (3% Of Materials Cost) 1.00 Lot Labor 1 Foreman 2.00 Days 1 Skilled Laborer 2.00 Days 1 Laborer 2.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1013(2)c Fabricated Metal Roofing Accessory (gutter, Ga. 24) Quantity 76.70 L.m Materials Gutter, Ga. 24 (0.701 Mm) X 2.44 M 77.00 M 12" X 1" Plain Gi Strap 231.00 Pc Blind Rivets 1,228.00 Pc Consumables (3% Of Materials Cost) 1.00 Lot Labor 1 Foreman 3.00 Days 1 Skilled Laborer 3.00 Days 3 Laborer 3.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1001(8) Sewer Line Works Quantity 1.00 L.s. Materials 100mm Ø Pvc Pipe Sp 15.00 Pcs 50mm Ø Pvc Pipe Vstw 3.00 Pcs 100mm Ø Pvc Pipe Coupling 19.00 Pcs 100mm Ø Pvc Pipe 87.5 Deg Bend 4.00 Pcs 100mm Ø Pvc Pipe 45deg Wye 21.00 Pcs 100mm Ø Pvc Pipe Double Branch Tee 2.00 Pcs Clean Out 100mm W/ Cover 6.00 Pcs P-trap 17.00 Pcs Consumables (5% Of Materials) 1.00 Lot Labor 1 Foreman 3.00 Days 1 Skilled Laborer 3.00 Days 3 Laborer 3.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1002(24) Cold Water Lines Quantity 1.00 L.s. Materials 20mm Ø Upvc - Ppr 10.00 Pcs 12mm Ø Upvc - Ppr 18.00 Pcs Ppr - Coupling 12mm Ø 13.00 Pcs Ppr - Elbow 12mm Ø, 90deg 10.00 Pcs Gate Valve 2.00 Pcs Faucet 8.00 Pcs Ppr - Tee 12mm Ø 27.00 Pcs Consumables (5% Of Materials) 1.00 Lot Labor 1 Foreman 2.00 Days 1 Skilled Laborer 2.00 Days 1 Laborer 2.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1001(9) Storm Drainage And Downspout Quantity 1.00 L.s. Materials 100mm Ø Pvc Rwdp 17.00 Pcs 100mm Ø Pvc Sdp 27.00 Pcs 100mm Ø Pvc Pipe 90deg Elbow 48.00 Pcs Roof Drain (dome Type Strainer) 16.00 Pcs Consumables (5% Of Materials) 1.00 Lot Labor 1 Foreman 10.00 Days 1 Skilled Laborer 10.00 Days 1 Laborer 10.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1002(4) Plumbing Fixtures Quantity 1.00 L.s. Materials Water Closet Including Fittings And Accessories 4.00 Set Urinal Including Fittings And Accessories 1.00 Set Lavatory Including Fittings And Accessories 1.00 Set Counter Sink (1 Faucet) 2.00 Set Gate Valve, 50mm Dia 1.00 Pc Check Valve, 50mm Dia. 1.00 Pc S.s. Floor Drain 4'x4'' 9.00 Pc Mirror 12.00 Sq.ft Bronze Faucet (12.7mm D) 3.00 Pcs Consumables (5% Of Materials) 1.00 Lot Labor 1 Foreman 9.00 Days 1 Skilled Laborer 9.00 Days 2 Laborer 9.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1001(11) Septic Vault/ Tank (concrete / Chb) Quantity 1.00 L.s. Materials Portland Cement 120.00 Bags Sand 4.00 Cu.m Gravel G-1 14.00 Cu.m Reinforcing Steel Bars Deformed Grade 40 108.00 Kgs Plastering 34.00 Sq.m Water Proofing Cement (sahara Or Equivalent) 25.00 Sq.m Labor 1 Foreman 6.00 Days 2 Skilled Laborer 6.00 Days 4 Laborer 6.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1001(5)b Catch Basin (chb) Quantity 16.00 Each Materials Portland Cement 16.00 Bags Sand 1.00 Cu.m Gravel G-1 2.40 Cu.m Reinforcing Steel Bars Deformed Grade 40 138.00 Kgs Labor 1 Foreman 2.00 Days 1 Skilled Laborer 2.00 Days 3 Laborer 2.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1100(10) Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) Quantity 1.00 L.s. Materials 20mmø Upvc Conduit 84.00 Length 25mmø Rsc Conduit 1.00 Length Utility Box, Deep Type 23.00 Pc Junction Box, Deep Type 35.00 Pc 25 Mmø Entrance Cap 1.00 Pc 16mmøx2.4m Ground Rod 1.00 Pc Labor 1 Foreman 2.50 Days 1 Skilled Laborer 2.50 Days 2 Laborer 2.50 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1101(33) Wires And Wiring Devices Quantity 1.00 L.s. Materials Electric Wires Thwn/thnn 3.5 Mm2 856.00 M Electric Wires Thwn/thnn 8.0 Mm2 200.00 M 2 Gang Outlet 16.00 Set Three Gang Switch 1.00 Set Two Gang Switch 2.00 Set One Gang Switch 4.00 Set Kwhr Meter 1.00 Set Tape, Bolt&nut, Mica Tube, Terminal Lugs, 1.00 Lot Jb Cover Clamps, Screw And Anchors Consumables (5% Of Materials Cost) 1.00 Lot Labor 1 Foreman 2.50 Days 2 Skilled Laborer 2.50 Days 2 Laborer 2.50 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1102(1) Panelboard With Main & Branch Breakers Quantity 1.00 L.s. Materials Lpa - Flush Mounted, Nema 1 Enclosure W/ Ground Terminal 1.00 Set Main: 100at, 100af, 2p, 240v ,18kaic Branches: 5 - 15at, 50af, 2p, 240v 3 - 20at, 50af, 2p, 240v Enclose Circuit Breaker (ecb) 1.00 Set 100 At, 2 Pole, 240 Vac 25 Kaic Mccb Ecb Nema 3r Enclosure 1.00 Set Labor 1 Foreman 4.00 Days 1 Skilled Laborer 4.00 Days 3 Laborer 4.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot 1103(1) Lighting Fixtures Quantity 1.00 L.s. Materials 18 Watts Led Bulb 23.00 Set 100 Watts Flood Light 12.00 Set Labor 1 Foreman 10.00 Days 2 Skilled Laborer 10.00 Days 1 Laborer 10.00 Days Equipment 1 Minor Tools (10% Of Labor Cost) 1.00 Lot
Closing Date11 Nov 2024
Tender AmountPHP 7.4 Million (USD 129.4 K)
DYAS EU And A S Tender
Czech Republic
Details: The subject of the performance of this order is the delivery of the performance expected in the framework of the grant project submitted in the framework of the Operational Program Technology and Application for Competitiveness in the framework of Innovation - Call for IS Named "innovated Production of Composite Plywood Boards for Transport Systems" Registration Number Cz.01.01.01/02/22_003 /0000218. The technical parameters are as follows, with the fact that the client allows their modification while maintaining the principle that performance and range parameters are set as minimum and power, size and weight parameters as maximum, unless something else is stated for a specific parameter, with a tolerance so that the device It Could Be Installed In The Location For This Equipment. This contract also includes transport including insurance, supervision of installation, commissioning and operator training at the place designated by the client. The selected supplier is responsible for ensuring that the order will be delivered complete and will contain all parts necessary for trouble-free operation. Only Original (non-refurbished) Components Will Be Used For Production. The Technical Specification Establishes the Basis of Minimum Requirements for Function, Performance, Lifetime, Etc. If Zd or its Annexes contain specific trade names or brands, this is only a definition of the required standard, and the client also allows other technically and qualitatively comparable solutions. Technical Specification Peeler With Floating Rotor Characteristics of the User Environment. Working Environment Outdoor Protected Properties of Processed Material. Material: Wooden logs with bark Wood: beech, spruce, poplar, ash Minimum log diameter 200 mm Maximum log diameter 750 mm Minimum log length 1,390 mm Maximum log length 3,000 mm Technical parameters of the debarker: Minimum workable log diameter ≤ 200 mm Maximum workable Log Diameter ≥ 750 Mm Minimum Workable Log Length ≤ 1,390 Mm Maximum Workable Log Length ≥ 3,000 Mm Output In Two Work Shifts* Min. 250 M3 * Calculated For Beech With Cutout Structure 25% …… Length 1390 Mm 15% …… Length 1640 Mm 20% …… Length 2340 Mm 40% …… Length 2630 Mm Average Diameter 450 Mm Maximum Feed Speed Min. 25 M/min. Number of Rotor Arms Min. 5 Pcs (with Interchangeable Cutting Tool) Electricity 3 X 400v, 50 Hz Compressed Air 6 Bar Functionality A. Log Diameter Measuring Device Before Debarker. B. Independent Hydraulic Positioning of Input and Output Pressure Cylinders. C. Hydraulic Vertical Positioning of the Rotor According to the Diameter of the Trunk. D. Adjustable Rotor Arm Pressure. E. Automatic Lubrication of the Main Rotor Bearing. F. Continuous Measurement of the Operating Temperature of the Main Rotor Bearing. G. Machine Control And Automation Using Plc. H. Possibility of Remote Service Vpn Connection Via Lan. I. Touch Screen - Hmi With Process Control And Visualization. The Delivery Must Include the Following: I. Delivery of Drawing Documentation for the Preparation of Foundations, Including Static and Dynamic Loads No Later than Two Months After Signing the Contract. II. Delivery of Mechanical Parts. III. Delivery of Complete Electrical Installation Including Cables. IV. Machine Control System Software Including Licenses. V. Delivery of Complete Hydraulic System Including Distribution Pipes. You. Installation supervision. Vii. Operation of the peeler and operator training. Viii. Manuals For Operation, Maintenance And Lubrication In Czech Language. Ix. Supply of Safety Elements Necessary for Ce Certification. X. Supply of Drawing Documentation for Mechanical and Electrical Parts. The order is not divided into parts. The contracting authority does not intend to discuss offers with the participants within the meaning of Art. 5.4 of the Rules.
Closing Date2 Dec 2024
Tender AmountRefer Documents
601-610 of 606 active Tenders