Plywood Tenders

Details: Description Republic Of The Philippines Bids And Awards Committee City Of Dapitan October 18, 2024 Invitation To Bid The City Government Of Dapitan, Through Its Bids And Awards Committee (bac), Invites Interested Parties To Apply For Eligibility And If Found Eligible To Bid For The Following Contract: Contract Id: Pow# 2024-10-17-029 Contract Name: Improvement Of Covered Court, Napo, Dapitan City Approved Budget For The Contract (abc): Php 1,016,009.60 (inclusive Of All Applicable Taxes) Part Of The Total Abc Of P1,020,000.00 Source Of Fund: 20% Ldf Cy 2024 • Prospective Bidders Should Have Expertise In Undertaking A Similar Project Within The Last Three (3) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. • Bidders / Contractor’s Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents. • Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates. • The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post Qualification Of The Lowest/single Calculated Bid Shall Be Conducted. • All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr). The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting October 19 – 26, 2024 Availability And Issuance Of Bidding Documents October 21 – November 12, 2024; 1:30 P.m. Pre-bid Conference October 29, 2024; 2:00 P.m Deadline For The Submission Of Bids November 12, 2024; 1:30 P.m Bid Evaluation November 12, 2024; 2:00 P.m • Philippine Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The City Of Dapitan. (bacdapitan@gmail.com) • Payment For The Bidding Documents Is A Non – Refundable Amount Of Five Thousand Pesos Only (php 5,000.00) Payable To The Office Of The City Treasurer, Dapitan City. The City Government Of Dapitan Assumes No Responsibility Whatsoever Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. The City Government Of Dapitan Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Rejects All Bids At Any Time Prior To Award Of Contract, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. Sgd.engr. Renmar Terenz E. Draper Cgdh I, Management Information System Office Bac Chairman Annex A: Item No. Description Unit Qty. B.5 Project Billboard Ls 1.00 B.7(2) Occupational Safety And Health Program Ls 1.00 B.9 Mobilization/demobilization Ls 1.00 A. Repair Of Stage 802(1) Removal Of Existing Structure/obstruction Ls 1.00 903(2) Formworks And Falseworks Ls 1.00 Spl I Carpentry Works (roof Framing) Ls 1.00 1014 Pre-painted Metal Sheets (rib Type) Sq.m. 31.36 1032(1)a Painting Works (masonry) Sq.m. 38.56 B. Construction Of New Comfort Room 803(1)a Structure Excavation, Common Soil Cu.m. 13.23 804(1)a Embankment From Structure Excavation Cu.m. 10.31 804(1)b Embankment From Borrow Cu.m. 14.76 804(4) Gravel Fill Cu.m. 2.22 900(1) Structural Concrete For Column Cu.m. 0.83 900(1)c2 Structural Concrete For Footing And Slab Cu.m. 4.04 On Fill 902(1) Reinforcing Steel Of Reinforced Concrete Kg 345.19 Concrete Structures 903(2) Formworks And Falseworks Ls 1.00 Spl Ii Septic Tank Ls 1.00 Spl Iii Roof Framing Ls 1.00 1001(8) Sewer Line Works Ls 1.00 1024(4)a Water Line Works Ls 1.00 1002(5) Plumbing Fixtures Ls 1.00 1003(1)a 6mm Marine Plywood In Wood Sq.m. 11.40 Framing Ceiling 1009(1)a Jalousie Window (glass) Ls 1.00 1010(1) Frames (jambs) Ls 1.00 1013(2) Fabricated Metal Roofing Accessory Ls 1.00 (flashing) 1013(2)c Fabricated Metal Roofing Accessory M. 4.00 (gutter) 1014 Pre-painted Metal Sheets (rib Type) Sq.m. 11.40 1018(1) Glazed Tiles & Trims Sq.m. 46.04 1027(1) Cement Plaster Finish Sq.m. 150.07 1032(1)a Painting Works (masonry) Sq.m. 95.86 1032(1)b Painting Works (wood) Sq.m. 11.40 1032(1)c Painting Works (metal) Ls 1.00 1046 100mm Chb Non-load/load Bearing Sq.m. 75.04 Including Reinforcing Steel Spl Iv Hardware Ls 1.00 C. Repair/rehabilitation Of Bleacher 802(1) Removal Of Existing Structure/obstruction Ls 1.00 903(2) Formworks And Falseworks Ls 1.00 Spl V Carpentry Works (column Posts & Roof Ls 1.00 Framing) 1014 Pre-painted Metal Sheets (rub Type) Sq.m. 88.40 1032(1)a Painting Works (masonry) Sq.m. 102.24 D. Electrical Works 1100 Electrical Works Ls 1.00

Details: Description Item No. Item & Description Quantity Unit Concrete & Masonry Works 1 Porland Cement Type 1 185 Bags 2 Washed Sand 16 Cu.m. 3 Gravel 3/4" 7 Cu.m. 4 16mm X 6.0m Rsb (grade 40) 37 Pcs 5 10mm X 6.0m Rsb (grade 33) 200 Pcs 6 12mm X 6.0m Rsb (grade 33) 130 Pcs 7 # 16 Tie Wire 39 Kls 8 Chb #4 1726 Pcs 9 Coco Lumber 2" X 2" X 10" 30 Pcs 10 Coco Lumber 2" X 3" X 10" 40 Pcs 11 Cw Nails 4" 6 Kls 12 Cw Nails 2-1/2" 4 Kls 13 Cw Nails 1" 3 Kls 14 Nylon String 3 Roll 15 1/2" X 4" X 8" Marine Plywood 6 Roll 16 Bamboe Poles 30 Pcs 17 Plastic Binders 2 Rolls Steel Works & Roofing Works 18 Welding Rod 80 Kls 19 1.2mm X 2" X 3" C-purlins 32 Pcs 20 3/16" X 1" X 1" Angle Bar 14 Pcs 21 3/16" X 1" Flat Bar 23 Pcs 22 1/4" X 3" X 3" Angle Bar 16 Pcs 23 3/16" X 2" X 2" Angle Bar 13 Pcs 24 Prepainted Long Span Roofing 0.4mm X 9.4m (blue) 12 Pcs 25 Pre-painted Fascia Cover (white) 18 Pcs 26 Pre-painted End Flashing (blue) 10 Pcs 27 Tekscrew 2" 900 Pcs 28 Tek Screw Adaptor 6 Pcs 29 Steel Brush 3 Pcs 30 Epoxy Metal Primer (gray) 6 Pcs 31 Epoxy Reducer 2 Pcs 32 Cut Off Disc 14" 5 Pcs 33 Cutting Disc 4" 20 Pcs Painting Works 34 Flat Wall Latex 11 Gal 35 Semi Gloss Latex 22 Gal 36 Skim Coat 8 Bag 37 Sand Paper 50 Pcs 38 Pain Brush 2 1/2" 4 Pcs 39 Baby Rollers W/pan 4 Pcs Doors And Windows 40 Loose Pin Hinges 2" X 4" 2 Pcs 41 Door Knob Heavy Duty 3 Pcs 42 0.6m X 2.1m Pvc Door With Louver 1 Set 43 0.9m X 2.1m Wooden Panel Door With W/2" X 5" Door Jamb 2 Set 44 1/4" Thk Glass Sliding Window On Aluminum Frame 143 Sqft Tile Works (2nd Floor) 45 60cm X 60cm Glazed Tiles (multi Purpose Area & Office 148 Pcs 46 60cm X 60cm Glazed Tiles (wall) 16 Pcs 47 60cm X 60cm Non-skid Tiles (cr Floor) 8 Pcs 48 Tiles Adhesive 11 Bag 49 Grout 5 Kls Electrical Works 50 Panel Board (60a-main, 1-20a, 3-30a) 1 Set 51 Flexible Hose 3/4 1 Roll 52 Led 12w Watts Bulb W/ Receptacle 6 Pcs 53 2.0mm² Tth Wire 1 Roll 54 3.5mm² Tth Wire 1 Roll 55 5.5mm² Tth Wire 40 I.m. 56 8.0mm² Tth Wire 40 I.m. 57 Electrical Tape (big) 3 Rolls 58 Double Conv. Outlet (flush Type) 4 Pcs 59 1-gang Switch (flush Type) 3 Pcs 60 2-gang Switch (flush Type) 1 Pcs 61 Junction Box 4" X 4" W/ Cover 6 Pcs 62 Utility Box 2" X 4" Pvc 8 Pcs 63 1/2" Pvc Electrical Conduit Elbow (orange) 10 Pcs 64 1/2" Pvc Electrical Pipe (orange) 15 Pcs Plumbing Works 65 Water Closet W/ Fittings 1 Set 66 Lavatory W/ Fittings 1 Set 67 Stainless Floor Drain 4" X 4" 1 Pcs 68 4" Pvc Pipe S-900 5 Pcs 69 4" Pvc Elbow 90° 4 Pcs 70 4" Pvc Elbow 45° 3 Pcs 71 4" Pvc Wye 1 Pcs 72 4" Pvc Tee 8 Pcs 73 4" Pvc Clean Out 2 Pcs 74 2" Pvc Pipe S-900 5 Pcs 75 2" Pvc Elbow 90° 4 Pcs 76 2" Pvc Tee 5 Pcs 77 2" Pvc Wye 3 Pcs 78 2" Pvc P-trap 1 Pcs 79 1/2" Diameter Pvc Blue 8 Pcs 80 1/2" Pvc Ball Valve 1 Pcs 81 1/2" Pvc Elbow 90° 5 Pcs 82 1/2" Pvc Tee 12 Pcs 83 Solvent Cement 400cc 2 Cans 84 Teflon Tape 3 Pcs

Details: Description Quantity Unit Item Description Power Tools 1 Unit "air Compressor • 1.5 Horsepower • 220v; 60 Hz • At Least 1700 R/min • 125 L/min Air Pressure • 63.7mm X2 Cylinder" 2 Set "impact Drill With Tool Kit • Rated Input Power - 850 W • No-load Speed, 1st Gear, 0 – 630 Rpm • Rated Torque - 11.0 Nm • Chuck Capacity, Min./max. - 3 – 16 Mm" 3 Unit "angle Grinder • Rated Input Power - 750 W • No-load Speed - 11,000 Rpm • Disc Diameter - 100 Mm • Grinding Spindle Thread - M10" 2 Set "cordless Impact Drill With Battery And Charger • Torque (soft/hard/max.) - 21/56/56 Nm • No-load Speed (1st Gear / 2nd Gear) - 374 – 484 / 1,402 – 1,815 Rpm • Battery Voltage - 18.0 V • Weight Incl. Battery – At Least 1.5 Kg • Torque (max) - 56 Nm • Weight Excl. Battery – At Least 1.2 Kg • Torque Settings – 20 " 2 Set "cordless Impact Wrench With Battery And Charger • Battery Voltage - 18.0 V • Torque, Max. - 200 Nm • No-load Speed - 0-3,400 Rpm • Tool Holder - 1/2'' Square, 1/4'' Hex Uni • No-load Speed (1st Level): 0-1,100 Rpm • No-load Speed (2nd Level): 0-2,300 Rpm • No-load Speed (3rd Level): 0-3,400 Rpm • Torque Settings - 3 • Weight Excl. Battery – At Least 1.2 Kg • Impact Rate: 0-4,000 Bpm • Impact Rate (1st Level): 0-2,300 Bpm • Impact Rate (2nd Level): 0-3,400 Bpm • Impact Rate (3rd Level): 0-4,000 Bpm" 1 Unit "cut Off Machine • No-load Speed - 4,100 Rpm • Weight - At Least 13.5 Kg • Rated Input Power - 2,300 W • Size Of Blade: 14 Inches Disc " 2 Unit "inverter Tig Welding Machine • Input Voltage: 220v 1 Phase • Duty Cycle: 60% • Frequency: 50/60hz • Rated Input: 7.23kva • No Load Voltage: 56v • Rated Output Voltage: 17.2v • Efficiency: 85% • Output Current Range:20-180a • Insulation Class: B • Net Weight: Atleast 8.5kg • Processes: Stick & Tig • Materials: Aluminum, Steel, Stainless & Chrome Molybdenum" 1 Unit "drill Press • Drilling Cap: 13mm (1/2"") • Motor Power: 1/2hp • Spindle Travel: 50mm • Class Of Speed: 5 • Height: At Least 580mm • Spindle Taper: B16 • Swing: 210mm • Table Size: At Least 160x160mm • Base Size: At Least 290x190mm • Column Diameter: At Least 46mm • Height: At Least 588mm" 1 Unit "vacuum Blower • Battery Voltage - 18.0 V • Max. Air Speed - 270 Km/h • Max. Airflow - 120 M³/h • No-load Speed - 17,000 Rpm • Runtime Speed I : 8 Min/ah, Speed Ii : 3.5 Min/ah • Weight Excl. Battery Maximum 1.1 Kg" 1 Unit "electric Circular Saw • Rated Input Power -1400 W • Saw Blade Diameter - 184 Mm • Voltage, Electrical - 220 V • No-load Speed - 6,200 Rpm • Saw Blade Bore Diameter - 20 Mm • Weight - Maximum 3.7 Kg • Baseplate – Maximum 290 X 150 Mm" 1 Unit "electric Jigs Saw • Rated Input Power -520 W • Voltage, Electrical - 230 V • Saw, Stroke Length - 20 Mm • Stroke Rate At No Load: 800 – 3,200 Spm • Weight - Maximum 2.29 Kg • No-load Speed - 3,200 Rpm • Bevel Angle -45 – 45 °" 1 Set "cordless Hand Drill With Battery And Charger • Torque (soft/hard/max.) - 28/50/50 Nm • No-load Speed (1st Gear / 2nd Gear): 0 – 460 / 0 – 1,800 Rpm • Battery Voltage - 18.0 V • Weight Incl. Battery - 1 Kg • Torque (max) - 50 Nm • Battery Type: Lithium-ion • Chuck Capacity, Min./max. - 1.5 / 13 Mm • Weight Excl. Battery Maximum - 1 Kg • Torque Settings: 20+1" 3 Set "electric Drill • Rated Input Power - 600 W • Bit Holder - 1/2""-20 Unf • No-load Speed, 1st Gear: 0 – 2,600 Rpm • Power Output - 360 W • Weight - Maximum 1.7 Kg • Rated Torque - 20.0 Nm • Drill Spindle Connecting Thread - 1/2""-20 Unf • Chuck Capacity, Min./max.: 1.5 – 13 Mm" 2 Units "digital Clampmeter • Ac Current Range - 600.0a • Ac Current Accuracy - 1.8% ±5 • Ac Voltage Range - 400/600 • Ac Voltage Accuracy - 1.5% ±5 • Dc Voltage Range - 400/600 • Dc Voltage Accuracy - 1.5% ±5 • Dc Mv Range - • Resistance Range - 4000 Ω • Resistance Accuracy - 1% ±5 • Continuity: ≤ 70 Ω • Backlight Display - Yes • Data Hold - Yes • H X W X D (mm) - 208 X 58.5 X 28 • Jaw Size 30 Mm • Safety Rating - Cat Iii 600 V • Temperature - 0 ~ 40 °c • Screen Refresh Rate > 2 Times / Sec. • Test Leads - Tl75 • Battery - 2 Aa Batteries" 1 Unit "laser Distance Measurer • Laser Diode - 635 Nm, < 1 Mw • Measurement Range - 0.15 – 40.00 M • Laser Color - Red • Measuring Range, Up To 40 M • Measurement Time, Typical < 0.5 S • Laser Class 2 • Measurement Accuracy, Typical ± 2.0 Mmᵈ • Measurement Time, Max. 4 S • Power Supply - 2 X 1.5 V Lr03 (aaa) • Automatic Deactivation - 5 Min" 1 Set "hydraulic Crimping Tool • Crimping Range: Cu 16-240mm2 • Crimping Force: At Least 70kn • Crimping Type: Hexagon Crimping • Stroke: 18mm Length: Approx. 475mm • Weight: Approx. 3 6kg Weight Of Box: Approx. 1 8kg Accessories • Crimping Dies: 16,25,35,50,70,95,120,150,185,240mm² • Sealing O-ring: One Set 1 Unit "bench Grinder • Grinding Wheel Diameter - 150 Mm • Rated Input Power - 350 W • Grinding Wheel Widths - 20 Mm • No-load Speed - 3,000 Rpm • Grinding Wheel Bore - 20 Mm • Weight - Maximum 10 Kg" 1 Unit "electric Planer • Rated Input Power -710 W • Planing Width – At Least 82 Mm • Planing Depth – 0 – 1 Mm • Weight – Maximum 2.5 Kg • Adjustable Rebating Depth: 0 – 9 Mm • No-load Speed - 16,500 Rpm" Materials 30 Pcs Satin Stainless, Lever Handle With Single Deadbolt Double Lock Doorknob 10 Box 2.5mm Welding Rod N-6013 1 Box 2.5mm Welding Rod N-6013 (s/s) 100 Pcs Cutting Disc 4" 30 Pcs Cutting Disc 14" 10 Pcs Diamond Cutting Disc 4" 50 Pcs Welding Silver Rod 5 Roll 5/8" Copper Pipe 5 Roll 3/8" Copper Pipe 5 Roll 1/2" Copper Pipe 5 Roll 1/4" Copper Pipe 3 Cylinder Freon R22 3 Cylinder Freon R410a 2 Cylinder Freon R134a 5 Cylinder Freon 32 5 Pcs 35a, 220v Contactor 10 Pcs 60uf Capacitor, 450v 10 Pcs 45uf Capacitor, 450v 10 Pcs 45/6 Uf Capacitor, 450v 10 Pcs 35/5uf Capacitor, 450v 10 Pcs 40uf Capacitor, 450v 50 Pcs Charging Access Valve, 100mm 5 Pcs "aircon Universal Control System - 5 Working Mode - 3 Fan Speed - Accurate And Stable Temperature Control - Timer Inline/ Offline Sleep" 20 Pcs Run Capacitor 5uf, 450v (window Type) 10 Pcs Run Capacitor 17/2uf, 450v (window Type) 10 Pcs Run Capacitor 50/7uf, 450v (window Type) 10 Pcs Run Capacitor 50uf, 450v (window Type) 10 Pcs Run Capacitor 45uf, 450v 5 Pairs Welding Gloves 2 Pcs Auto-darkening Welding Mask 2 Pcs Aluminum Ladder (6ft.) 2 Pcs Aluminum Ladder (10ft.) 10 Pcs Flat Screw, 6mm X 200mm 10 Pcs Phillip's Screw, 6mm X 200mm 10 Pcs Lineman's Pliers 10 Pcs Side Cutter Pliers 10 Pcs Long Nose Pliers 3 Pcs Flash Light, 250 Lumens, Battery: Aa 3 Pcs Vice Grip 14" 1 Set Allen Wrench 30 Ft. Auger Spring Cable (12mm) 30 Ft. Sewer Rod (3/4") 50 Pcs Electrical Tape (big) 3 Roll 2.0mm² Thhn Wire 3 Roll 3.5mm² Thhn Wire 2 Roll 5.5mm² Thhn Wire 2 Roll Flat Cord #16 20 Sets Single Type Universal Convinience Outlet 30 Sets Duplex Type Universal Convinience Outlet 20 Sets 1-gang Switch 20 Sets 2-gang Switch 3 Roll Soldering Lead 20 Pcs 4x4 Receptacle Socket 20 Pcs 3x3 Receptacle Socket 20 Pcs Pvc Utility Box 20 Pcs Pvc Junction Box 20 Pcs Pvc Square Box 30 Pcs Amco Box 30 Pcs 3/4" Plastic Moulding 50 Pcs Elbow Plain (1/2"), Pvc Blue 30 Pcs Elbow Plain (3/4"), Pvc Blue 20 Pcs Elbow Plain (1"), Pvc Blue 50 Pcs Pvc Male Adapter (1/2") 30 Pcs Pvc Male Adapter (3/4") 20 Pcs Pvc Male Adapter (1") 50 Pcs Pvc Female Adapter (1/2") 30 Pcs Pvc Female Adapter (3/4") 20 Pcs Pvc Female Adapter (1") 50 Pcs Pvc Coupling (1/2") 30 Pcs Pvc Coupling (3/4") 20 Pcs Pvc Coupling (1") 50 Pcs Pvc Threaded Elbow (1/2") 30 Pcs Pvc Threaded Elbow (3/4") 10 Sets Tank Fittings 20 Sets Hose Bidet, Stainless 20 Pcs Brass Ball Valve (1/2") 10 Pcs Brass Ball Valve (3/4") 10 Pcs Brass Ball Valve (1") 30 Pcs Angle Valve (1/2") 30 Pcs Three-way Angle Valve (1/2") 30 Pcs Flexible Hose (1/2x1/2x12) 30 Pcs Flexible Hose (1/2x7/8x14) 20 Pcs Flexible Hose (1/2x3/8x14) 20 Pcs Flapper Ball 15 Pcs Push Button Valve 10 Pcs Brass Gate Valve (1/2") 10 Pcs Brass Gate Valve (3/4") 10 Pcs Brass Gate Valve (1") 30 Lgts Pvc Pipe (1/2") 25 Lgts Pvc Pipe (3/4") 25 Lgts Pvc Pipe (1") 30 Pcs Ordinary Faucet, Brass 20 Pcs Lavatory Faucet (wall Mounted), Stainless Steel 20 Pcs Lavatory Faucet (goose Type), Stainless Steel 5 Pcs Solvent Cement (200ml) 50 Pcs Teplone Tape (3/4") 50 Pcs Teplone Tape (1") 10 Bags Cement 10 Pcs Rubber Pump 5 Pcs Wet And Dry Sealant, 200ml 20 Pcs Pvc End Cap (1/2") 20 Pcs Pvc End Cap ((3/4")) 20 Pcs Pvc End Cap (1") 20 Pcs Pvc Plug (1/2") 20 Pcs Pvc Plug (3/4") 20 Pcs Pvc Plug (1") 10 Pcs Brass Check Valve (3/4") 10 Pcs Brass Check Valve (1") 10 Pcs Brass Check Valve (1 1/4") 20 Pcs Pvc Union Patente (1/2") 20 Pcs Pvc Union Patente (3/4") 20 Pcs Pvc Union Patente (1") 20 Pcs Pvc Lavatory P-trap (1 1/4") 20 Pcs Pvc Lavatory P-trap (1 1/2") 50 Pcs S4s (2"x2"x12') 50 Pcs S4s (2"x2"x10') 50 Pcs S4s (2"x2"x8') 30 Pcs Marine Plywood (3/4"x4'x8') 30 Pcs Marine Plywood (1/2"x4'x8') 30 Pcs Marine Plywood (1/4"x4'x8') 50 Pcs Center Moulding (3/4"x10') 50 Pcs Center Moulding (1/2"x1"x10') 25 Gal Flat Wall Enamel, White 10 Gal Latex Paint, White 15 Gal Quick Dry Enamel, White 20 Gal Paint Thinner 10 Quartz Glazing Putty 20 Mts Sand Paper #100 20 Kgs Com. Nail (4") 30 Kgs Com. Nail (3") 30 Kgs Com. Nail (2") 30 Kgs Finishing Nail (2 1/2") 30 Kgs Finishing Nail (2") 30 Kgs Finishing Nail (1 1/2") 30 Kgs Finishing Nail (1") 30 Pcs Loss Pin Hinge (3") 2 Pail Elastomeric Paint, Royal Blue / King Cerulean 2 Pail Elastomeric Paint, Offwhite / Tinge Of Gray 2 Gal Quick Dry Enamel, Choco Brown 10 Pcs Roller Brush #7, Acrylon 10 Pcs Roller Brush #4, Acrylon 5 Pcs Paint Brush #4 10 Pcs Paint Brush #3 10 Pcs Paint Brush #2 5 Pcs Paint Brush #1 150 Pcs 9w Led Bulb, 220v 50 Pcs 20w Led Bulb, 220v 30 Pcs 18w, T8 Led Tube Light, 220v, 4ft 1 Pc Ball Hammer #4 2 Pcs Hand Riveter 10.5" 5 Set Concrete Drill Bit (3mm To 12mm) 5 Set Metal Drill Bit (stainless), 2mm To 6mm 2 Sets "assorted Blade Router (12 Pcs) Shank Diameter: 6mm 3pcs - Straight Bit:6mm,12mm,16mm 1pc - 1/2"" 90°v-groove Bit 1pc - 1/2"" Dovetail Bit 1pc - 32mm 45°chamfer Bit 1pc - 1/2"" Flush Trim Bits 2pc - Round Over Bit:1/4"",3/8"" 1pc - 1/4"" Core Box Bit 1pc - 1/4"" Core Bit 1pc - R-4 Roman Ogee Bit" "other Requirements: 1. Submission Of Pictures: Suppliers Must Submit Photographs Of The Actual Power Tools At The Opening Of Bids. 2. Physical Presentation: Suppliers Must Present The Physical Power Tools During The Ocular Visit For Inspection And Approval. 3. Warranty: Minimum Warranty Period Of 6 Months Is Required Specifically For Power Tools. Warranty Is Not Required For Consumable Items. Delivery Period: All Items Must Be Delivered Within 60 Calendar Days Upon Receipt Of Notice To Proceed (ntp)."

Details: Description 1. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Through The Cy-2025 National Expenditure Program (nep) Intends To Apply The Sum Of Six Hundred Twenty-five Thousand Pesos & 00/100 (php 625,000.00) Being The Abc To Payments Under The Contract For Cy-2025 Procurement Of Construction Materials For Pahp Project And Sls-crfps Project (darcat-pb-epa2025-009). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Provision Of Construction Materials For Nursery House And Post Harvest Facilities For Cfisa Salvacion, Panganiban, Catanduanes Under Pahp Project Cy 2025 Item No. Materials Quantity Unit Unit Cost Total 1 Blue Drum 4 Pc 2,500.00 10,000.00 2 Drip Irrigation Hose 400mm Space, 1000m Length, 0.2mm Thickness 16mm Diameter 1 Pc 9,000.00 9,000.00 3 Cement 160 Bags 290.00 46,400.00 4 Sand 4 Cu.m. 1,200.00 4,800.00 5 Gravel 8 Cu.m. 1,000.00 8,000.00 6 Pvc Pail 4 Pcs 40.00 160.00 7 1/4" Plywood, 4'x 8' 21 Pcs 550.00 11,550.00 8 2"x 2"x 12' Coco Lumber 132 Pcs 154.00 20,328.00 9 2"x 2"x 8' Coco Lumber 23 Pcs 100.00 2,300.00 10 4" Dia. X 12' Round Log (secondary Lumber) 30 Pcs 100.00 3,000.00 11 4" Cwn 30 Kg 100.00 3,000.00 12 3" Cwn 20 Kg 100.00 2,000.00 13 2" Cwn 10 Kg 100.00 1,000.00 14 1 1/2" Cwn 5 Kg 100.00 500.00 15 Drsb, 12mm Dia. X 6.0m 6 Pcs 350.00 2,100.00 16 Drsb, 12mm Dia. X 7.5m 8 Pcs 350.00 2,800.00 17 Drsb, 12mm Dia. X 9.0m 39 Pcs 400.00 15,600.00 18 Drsb, 10mm Dia. X 6.0m 7 Pcs 300.00 2,100.00 19 Drsb, 10mm Dia. X 7.5m 16 Pcs 300.00 4,800.00 20 Drsb, 10mm Dia. X 9.0m 24 Pcs 260.00 6,240.00 21 Gi Tie Wire #16 12 Kgs 91.00 1,092.00 22 Hacksaw Blade 15 Pcs 66.00 990.00 23 6" Chb 519 Pcs 30.00 15,570.00 24 Fine Sand 5 Cu.m. 1,200.00 6,000.00 25 Rsb, 10mm Dia. X 7.5m 23 Pcs 210.00 4,830.00 26 Rsb, 10mm Dia. X 6.0m 3 Pcs 165.00 495.00 27 G.i. Tie Wire #16 2 Kgs 95.00 190.00 28 Hacksaw Blade 4 Pcs 75.00 300.00 29 Corrugated Roofing G.i. Sheet Ga. 24 X 8' 36 Pcs 755.00 27,180.00 30 Wood Rafters, 2"x 6"x 10' Good Lumber 22 Pcs 1,500.00 33,000.00 31 Wood Ridge Beam, 2"x 6"x 12' Good Lumber 3 Pcs 1,200.00 3,600.00 32 Wood Purlins, 2"x 2"x 10' Good Lumber 36 Pcs 500.00 18,000.00 33 Plain G.i. Sheet Ga. 26 X 12' 8 Pcs 1,000.00 8,000.00 34 Assorted Cwn 25 Kgs 170.00 4,250.00 35 Umbrella Nail 6 Kgs 120.00 720.00 36 3/4" Thk. Marine Plywood, Sinepa (0.30m High) 3 Pcs 2,000.00 6,000.00 37 Vulcaseal 3 Liter 800.00 2,400.00 38 Hollow Core Flush Door W/ Door Jamb, 0.90m X 2.10m 1 Set 3,500.00 3,500.00 39 Loosepin Hinges, 2"x 3" 3 Pairs 120.00 360.00 40 Door Knob 1 Set 615.00 615.00 41 Concrete Louver Block, 150mm X 150mm X 300mm 63 Pcs 100.00 6,300.00 42 5-meter Hose With Nozzle 2 Pcs 465.00 930.00 Note: To Be Inspected First At Darcpo Then Delivered At The Area (cfisa, Salvacion, Panganiban, Catanduanes). Inclusive On-site Delivery To Recipient Arbo. Sub Total Abc Php 300,00.00 Provision Of Construction Materials For Piggery And Poultry Production For Bigma, Buyo Virac; Bsfpa, San Roque, Bato; Carecdo, Cabungahan, San Andres; Cabwasa, Cabcab, San Andres & Sifarmco, San Isidro, San Andres, Catanduanes Under Sls – Crfps Project Cy 2025 Item No. Materials Quantity Unit Unit Cost Total Piggery Facility With Septic Tank Arbo Recipient: Bigma, Bsfpa & Carecdo 1 G.i. Pipe, Sch. 40-3” Ø X 20’ 9 Pc 4,200.00 37,800.00 2 Cement, Type 1 144 Bags 320.00 46,080.00 3 Concrete Hollow Blocks 4” 1,470 Pc 25.00 36,750.00 4 Coco Lumber 2”x6”x12’ 54 Pc 450.00 24,300.00 5 Coco Lumber 2”x4”x12’ 48 Pc 350.00 16,800.00 6 Coco Lumber 2”x3”x12’ 42 Pc 250.00 10,500.00 7 Corrugated Steel Bar, 10mmx6m 108 Pc 240.00 25,920.00 8 G.i. Wire, #16 15 Kg 200.00 3,000.00 9 Nail 5” 15 Kg 204.00 3,060.00 10 Nail 4” 12 Kg 200.00 2,400.00 Note: Inclusive Of On-site Delivery At Buyo, Virac; San Roque, Bato And Cabungahan, San Andres, Catanduanes. To Be Inspected First At Darcpo Then Delivered At The Area Sub Total Abc Php 206,610.00 Item No. Materials Quantity Unit Unit Cost Total Poultry Facility Arbo Recipient: Cabwasa & Sifarmco 1 G.i. Pipe, Sch. 40-3” Ø X 20’ 4 Pc 4,200.00 16,800.00 2 Cement, Type 1 56 Bags 320.00 17,920.00 3 Concrete Hollow Blocks 4” 300 Pc 25.00 7,500.00 4 Coco Lumber 2”x6”x12’ 32 Pc 450.00 14,400.00 5 Coco Lumber 2”x4”x12’ 28 Pc 350.00 9,800.00 6 Coco Lumber 2”x3”x12’ 24 Pc 250.00 6,000.00 7 Corrugated Steel Bar, 10mmx6m 34 Pc 240.00 8,160.00 8 Corrugated G.i. Sheet Gauge 24 24 Pc 900.00 21,600.00 9 Pe Screen 1”x6’x30m 2 Roll 8,105.00 16,210.00 Note: Inclusive Of On-site Delivery At Cabcab, San Andres And San Isidro San Andres, Catanduanes To Be Inspected First At Darcpo Then Delivered At The Area Sub Total Abc Php 118,390.00 Total Abc Php 625,00.00 2. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By A Period Sixty (60) Days. Bidders Should Have Completed, Within At Least Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discret32ionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agrarian Reform (dar), Catanduanes Provincial Office And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours (8:00 Am To 5:00 Pm), Mondays Thru Fridays, Valid For The Duration That This Particular Bidding Activity Is Open From November 22, 2024 – December 11, 2024 Until 12:00 Noon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22, 2024 – December 11, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, By Mail, Or Through Electronic Means. 6. The Department Of Agrarian Reform, Catanduanes Provincial Office Will Hold A Pre-bid Conference For This Particular Procurement On November 29, 2024, Friday, 10:00 Am At Dar Catanduanes Provincial Office, Constantino (pob.), Virac, Catanduanes. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before December 11, 2024, Wednesday, Until 12:00 Noon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 11, 2024, Wednesday, 4:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office, Through The Provincial Bids & Awards Committee (bac) Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Ma. Katrina M. Sarausa Arpo I /head Bac Secretariat Department Of Agrarian Reform (dar) Catanduanes Provincial Office Brgy. Constantino (pob.), Virac, Catanduanes Cellphone Hotline: 09634442986 Email Address: Bacsec.catan@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website For Online Bid Submission: Bacsec.catan@gmail.com 21 November 2024 Atty. Cherry A. Agmata Bac Chairperson

Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac) Will Conduct Early Procurement Activities (epa) For The Following Project Funded By Nep 2025 In Accordance With The Guidelines On The Implementation Of Epa. Interested Entities Are Hereby Invited To Bid For The Following: Name Of Project: Other Supplies (hardware Supplies And Materials) For 1st And 2nd Quarters Of 2025 Location: Neust- Cabanatuan City Approved Budget For The Contract: Php2,030,800.24 Contract Duration: 90 Calendar Days Source Of Fund: Nep 2025 Cost Of Bidding Documents: Php5,000.00 Project Description: 1lot Item No. Unit Item Description Quantity 1 Piece 3 Prong Socket Adapter 60 2 Liter Aery-color Burnt Sienna-liter 12 3 Liter Aery-color Lamp Black-liter 12 4 Liter Aery-color Lemon Yellow-liter 12 5 Liter Aery-color Raw Sienna-liter 12 6 Liter Aery-color Toluidine Red-liter 12 7 Gallon Acrylic Emulsion, Clear Gloss 12 8 Liter Acrylic Paint, Black 5 9 Liter Acrylic Paint, Blue 5 10 Liter Acrylic Paint, Red 5 11 Liter Acrylic Paint, White 5 12 Bottle Acrylic Spray Paint, Black 10 13 Bottle Acrylic Spray Paint, Blue 10 14 Bottle Acrylic Spray Paint, Red 10 15 Bottle Acrylic Spray Paint, White 10 16 Bottle Acrylic Spray Paint, Yellow 10 17 Liter Acrylic Thinner - Hi Gloss 20 18 Piece Angle Bar 3/16 X 1 X 20 20 19 Piece Angle Valve L-way 60 20 Piece Angle Valve 2-way 60 21 Gallon Aqua Gloss It, White 12 22 Piece Baby Roller With Handle, 4" 50 23 Set Bidet, Stainless, Heavy Duty 100 24 Liter Body Filler, Guilder With Hardener 12 25 Piece Brass Faucet 50 26 Box Carbon Brush Cb103 For Grinder/electric Drill 12 27 Set Ceiling Orbit Fan 18" 20 28 Set Circuit Breaker 15amps. Plug In-2poles 20 29 Set Circuit Breaker 20amps.plug In -2poles 20 30 Set Circuit Breaker 30amps.plug In-2poles 20 31 Gallon Clear Gloss Varnish 12 32 Kilo Common Nail, L" (lkl/pack) 5 33 Kilo Common Nail, 2" (lkl/pack) 5 34 Kilo Common Nail, 3" (lkl/pack) 5 35 Piece Concealed Hinges C3 50 36 Kilo Concrete Naill L/2 (lkl/pack) 5 37 Kilo Concrete Nail 2 (lkl/pack) 5 38 Kilo Concrete Nail 3 (1kl/pack) 5 39 Piece Cutting Disk, 1/8" X 4" 50 40 Set Dead Vault Lock Sinale Cvlinder - 8111 Us5 50 41 Piece Diamond Cutting Disc For Tiles #4 50 42 Set Doorknob - Ylhca5127 100 43 Piece Drill Bit For Metal 5/32 50 44 Roll Electrical Tape, Big 100 45 Piece Expansion Shield 1/4 Lag 100 46 Unit Extension Cord W/surge Protector -303/6ft (3-gang With Usb) 10 47 Kilo Finishing Nail, L 1/2" (1kl/pack) 5 48 Kilo Finishing Nail, L " (1kl/pack) 5 49 Kilo Finishing Nail, 2 1/2"(1kl/pack) 5 50 Gallon Flat Latex, White-gallon 15 51 Liter Flat Latex, White-liter 15 52 Roll Flatcord #16-150meters / Roll 15 53 Piece Flexible Hose, 1/2 X 1/2,12" 50 54 Set Front Mount Lever 20 55 Kilo G.i. Tie Wire #12 / 2.8mm 20 56 Gallon Gloss Latex, White-gallon 12 57 Liter Gloss Latex, White-liter 12 58 Set Gooseneck Straight Type 50 59 Piece Grinding Disc 4" 50 60 Piece Handle For Cabinet-stainless 30 61 Kilo Lag Screw 1/4 X 2 1/2 5 62 Kilo Lag Screw 1/4 X 3 5 63 Set Lavatory P-trap 50 64 Piece Led Light Bulb 15w 50 65 Piece Led Light Bulb 28w 50 66 Piece Led Light Bulb 5w 60 67 Piece Led Panel Light Square 12-watts 50 68 Piece Led Panel Light Square 15-watts 50 69 Piece Led Panel Light Square 50-watts (60x60cm)mo 50 70 Piece Led Panel Light Square 50-watts {60x60cm)reci 50 71 Piece Led Panel Pin Light Square-6watts 50 72 Piece Led Panel Pin Light Square-9watts 50 73 Piece Led Tube 18w Tb, 1 Sided 100 74 Piece Led Tube 9w, 1 Sided 30 75 Piece Lumber, 2" X 3" X 10' 30 76 Piece Masonry Drill Bit 10mm 10 77 Piece Masonry Drill Bit 12mm 10 78 Piece Masonry Drill Bit 8mm 10 79 Piece Outlet, 2 Gang W/ground Surface Type 50 80 Piece Outlet, 3 Gang For Extension-3 Prong(w/ground 50 81 Piece Outlet, 3 Gang W/ground Surface Type 50 82 Piece Outlet, 4 Gang For Extension-3 Prong(w/ground 50 83 Piece Padlock, Master, 3d 50 84 Piece Padlock, Master, 5d 50 85 Piece Paint Brush, 1" 50 86 Piece Paint Brush, 2" 50 87 Piece Paint Brush, 4" 50 88 Piece Paint Roller With Handle, 9" 50 89 Gallon Paint Thinner 12 90 Piece Paint Tray, 4" 30 91 Piece Paint Tray, 9" 30 92 Piece Plastic Moulding 1" 100 93 Piece Plywood, 1/4" X 4' X 8' 50 94 Piece Plywood, 3/4" X 4' X 8' 100 95 Piece Ppr Cup Plug 1/2 50 96 Piece Ppr Elbow W/trade 1/2 100 97 Piece Ppr Female Connector 1/2 150 98 Piece Ppr Gate Valve, 1/2" 25 99 Set P-trap, Stainless, 1 1/4" 10 100 Piece Pvce/bow#2 100 101 Piece Pvce/bow#3 100 102 Piece Pvce/bow#4 50 103 Piece Pvcpipe#2 50 104 Piece Pvcpipe#3 50 105 Piece Pvcpipe#4 30 106 Liter Qde Royal Blue 12 107 Liter Qde, Lemon Yellow 12 108 Liter Qde, White 12 109 Box Rivets 5/32 X 1/2 5 110 Can Solvent 1/4 50 111 Liter Stikwell Glue, 1 Liter 12 112 Roll Straw Rope L00grams/rol1, Color Gray 30 113 Piece Surface Box, White 100 114 Piece Switch 1 Gana 50 115 Piece Tb Led Tube Holder 30 116 Set Tank Fittings Lever Type And Accessories Comp 100 117 Piece Teckscrew 11/2-for Metal 100 118 Piece Teckscrew 11/2-for Wood 100 119 Piece Teckscrew 2-for Metal 100 120 Piece Teckscrew 2-for Wood 100 121 Box Thhn Wire #10, 150 Meters/box, Japan 10 122 Box Thhn Wire #12, 150 Meters/box, Japan 10 123 Box Thhn Wire #14, 150 Meters/box, Jaoan 10 124 Box Thhn Wire #8,150 Meter/box, Japan 10 125 Box Tox #8 50pcs/box 20 126 Sachet Vulcaseal 75ml 50 127 Set Wall Faucet With Hose Bib 4" 30 128 Can Wall Putty L.5kls 24 129 Gallon Water Roofing Paint, Gallon-pacific Blue 25 The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement November 13-20, 2024 2. Issuance Of Bid Documents November 21-december 3, 2024 3. Pre-bid Conference November 21, 2024, 9:00am (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) December 3, 2024, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) December 4, 2024, 9:00 Am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 21-december 3, 2024 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 3, 2024, Until 5:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until December 10, 2024, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On December 4, 2024, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon (sgd.) Bac Chairperson

Details: Description Republic Of The Philippines Province Of Negros Oriental Municipality Of Pamplona Invitation To Bid For Materials For The Improvement Of Multi-purpose Pavement At Barangay Abante, Pamplona, Negros Oriental The Municipality Of Pamplona, Through The 2024 Supplemental Budget Intends To Apply The Sum Of Two Hundred Forty Three Thousand Four Hundred Ninety Two Pesos Only (243,492.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Materials For The Improvement Of Multi-purpose Pavement At Barangay Abante, Pamplona Negros Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Municipality Of Pamplona, Through The 2024 Supplemental Budget Intends To Apply The Sum Two Hundred Forty Three Thousand Four Hundred Ninety Two Pesos Only (243,492.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot/item. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Important: 1. Please Pay The Amount Of P 500.00 As Payment For This Bid At The Office Of The Municipal Treasurer. Quote Your Price For Each Item Only. 2. Remember That 2% Cash/check Deposit Of The Amount Of Abc Or Bid Securing Declaration Is Required Before Your Bid Will Be Considered No Qty Unit Description Unit Price Total 1 1 Sht 8 X 4 Tarpaulin (with Print And Eyelet) 2 1 Sht ¼’’ Thk. X 4 X 8 Marine Plywood 3 20 Bd.ft 5- 2 X 2 X 12 Coco Lumber 4 32 Bd.ft 4 – 2 X 4 X 12 Coco Lumber 5 1 Kg Assorted Cw Nails 6 432 Bags Portland Cement 7 49.5 Cu.m Gravel ¾’’ Size Choker 8 180 Length 10mmø X 6.0m Def. Bar, G-33 9 4 Kg Tie Wire #16 10 160 Bd.ft 24- 2 X 4 X 10 Coco Lumber 11 10 Pcs Hacksaw Blade 12 15 Gal Floor Coating Chlorinated Rubber Base, Crystal Blue (acx-21), 4lit 13 2 Gal Floor Coating Chlorinated Rubber Base, White, 4lit 14 6 Gal Paint Reducer 15 15 Gal Epoxy Sealer With Hardener 16 3 Gal Paint Roller 9’’ 17 3 Pcs Paint Roller 4’’ 18 3 Pcs Paint Brush 4’’ 19 3 Pcs Paint Tray 20 15 Pcs 3m Masking Tape 1’’ Total 2. The Municipality Of Pamplona Now Invites Bids For Materials For The Improvement Of Multi-purpose Pavement At Barangay Abante, Pamplona, Negros Oriental. Delivery Of The Goods Is Required 30 Calendar Days After Purchase Order. Bidders Should Have Completed, Within [insert Relevant Period] From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. In Addition, Select One Of The Two Following Paragraphs And Delete The Other Depending On The Existence Of Conditions Under Section 23.4.1.2 Of The Irr Of Ra 9184: (i) Select This Paragraph If Conditions (a), (c), And (d) Under Section 23.4.1.2 Of The Irr Of Ra 9184 Do Not Exist: Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. (ii) Select This Paragraph If Condition (a), (c), Or (d) Under Section 23.4.1.2 Of The Irr Of Ra 9184 Exists: Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 4. Interested Bidders May Obtain Further Information From Municipality Of Pamplona And Inspect The Bidding Documents At The Address Given Below During 8:00 Am- 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 18, 2024 From The Address Below. Bid Documents Will Be Available Only To Eligible Bidders Upon Payment Of A Non-refundable Amount Of Php 500.00 (fee For Bidding Documents) To The Municipal Treasurer Of Pamplona, Negros Oriental. 6. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 7. The Municipality Of Pamplona Will Hold A Pre-bid Conference On No Prebid At The Office Of The Municipal Mayor Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before November 27, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On November 27, 2024 At The Municipality Of Pamplona, Office Of The Municipal Mayor. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. N/a. 10. The Municipality Of Pamplona Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ronald A. Rojas Municipal Mayor’s Office Municipal Hall, Poblacion, Pamplona Negros Oriental 09751449538 Ronald.rojas38@gmail.com Pamplonito S. Catacutan Bac Chairman

Details: Description Republic Of The Philippines Province Of Iloilo Municipality Of Bingawan Office Of The Bids And Award Committee I N V I T A T I O N T O Re-b I D Pb- 2024-027a Purchase Of Materials For The Establishment Of Warehouse Municipal Hall, Bingawan, Iloilo 1.the Local Government Unit Of Bingawan, Through The 20% Development Fund Cy 2024 To Apply The Sum Of One Hundred Twenty Nine Thousand Five Hundred Fifty Pesos Only ( Php 129,550.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Purchase Of Materials For The Establishment Of Warehouse, Municipal Hall, Bingawan, Iloilo. Received In Excess The Abc Shall Automatically Bids Rejected At Bid Opening. Item Qty Unit Description Unit Cost Total Cost Php Php 1 Lot Materials For The Establishment Of Warehouse 20.00 Bags Portland Cement Type 1 1.00 Tl Ready Mix, Sand And Gravel 25.00 Length 10mm Dia X 6m Rsb 6.00 Kg # 16 Gi Wire 20.00 Pcs 2x2x12 Rough Lumber 10.00 Pcs 2x3x12 Rough Lumber 1.00 Sheets 12 Mm Thick Ordinary Plywood 4.00 Kgs 4” Cwn 4.00 Kgs 3” Cwn 2.00 Kgs 2 ½ “ Cwn 150.00 Pcs 4” Chb 2.00 M 1/8 Screen Wire 6.00 Length 2x4x1.20 Mm Tubular (rafter) 9.00 Length 2x3x1.20mm C- Purlins 2.00 Length 2” Diax6m, Sc.40 Gi Pipe 4.00 Length 2x2x1/4 X6m Angle Bar 5 .00 Kls E6013 Welding Rod,2.50mm 1.00 Pc Hacksaw Blade 3.00 Boxes Sanding Disc, 4” 9.00 Sheets Fiber Cement Board, 6.00mm X 1.20m X 2.40m 10.00 Pcs Wall Angle ( 0.40mmx25mmx25mm) 14.00 Pcs Furring Channel (0.40mmx12mm X 50mm ) 14.00 Pcs Carrying Channel (0.80mm X 12mm X 38 Mm ) 4.00 Kls Concrete Nails ,2” 6.00 Boxes Blind Rivets , (5/32 X 1”) 5.00 Pcs Cobalt Drill Bits ( 5/320 ) 4.00 Pcs No. 16 Gi Tie Wire 2.00 Ltrs Termite Control Solution (250 Ml ) 14.00 Sheets 0.40mm X 12 “ Gi Corrugated Metal Roofing 500.00 Pcs Tekscrew W/ Neophrene Washer 1.00 Unit Sliding Window (0.70m X 1.20m) 6mm Thk Clear Glass On Aluminum Frame W/ Complete Accesories 1.00 Set Panel Door (0.8m X 2.10m) With 2”x5” Solid Door Jam 1.00 Set Panel Door (0.9m X 2.10m) With 2”x5” Solid Door Jam 1.00 Set 0.70m X 2.10m Pvc Door W/o Louver 3.00 Sets Lever – Type Door Knob, Heavy Duty 4.00 Pairs 4x4 Loose Pin Hinges 1.00 Gal Paint Thinner 2.00 Gals Metal Primer, Red Oxide 10.00 Pcs Sanding Paper , No. 120 10.00 Pcs Sanding Paper, No. 1000 2.00 Gals Marine Epoxy ( Two-parts) 1.00 Gal Semi-gloss Latex White 2.00 Pcs 2” Paint Brush 1.00 Kg 1-1/4” Cwn Delivery Of The Goods Is Required On 45 Cd. The Description Of An Eligible Bidder Is Contained In The Bidding . Documents, Particularly In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “ Pass/fail” Criterion As Specified In The Implementing Rules And Regulation (irr) Of Republic Act (ra) 9184 Otherwise Known As The “government Procurement Reform Act”. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Bingawan And Inspect The Bidding Documents At The Address Given Below During 8a.m. To 5p.m. Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On November 20 - December 6, 2024 From The Address Below And Upon Payment Of Nonrefundable Amount Of Abc To The Cashier Of The Municipality Of Bingawan . 6. Bids Must Be Delivered To The Address Below On Or Before December 9, 2024 At 01:45 O ‘clock In The Afternoon. All Bids Must Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 7. Bid Opening Shall Be On December 9 , 2024 At Conference Room Hall At 2:00 O ‘clock In The Afternoon The Address Below .late Bids Shall Not Be Accepted. 8. Bidder’s Representative Must Submit Special Power Of Attorney (spa) Duly Notarized For The Purpose Of Joining The Competitive Bidding For The Project During The Submission Of The Letter Of Intent (loi) 9. Bidder Or His Representative Must Present Two (2) Valid Id’s I.e. Recent Company Id And Sss Id Upon Submission Of The Letter Of Intent (loi) On November 20- December 9, 2024 10 The Local Government Unit Of Bingawan Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process And To Reject All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information: Contact Bac Secretariat/09255457705 Pagara St., Bingawan, Iloilo Approved : (sgd) Chrizalyn Mae H. Matutina Bac Chairman

Details: Description Republic Of The Philippines Province Of Agusan Del Norte Municipality Of Kitcharao Invitation To Bid For Construction Of Multi-purpose Building At Lgu Farm Phase 2 1. The Municipality Of Kitcharao, Through The 20% Development Fund Cy 2024 Intends To Apply The Sum Of Two Million Eight Hundred Thousand Pesos (php 2,800,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Construction Of Multi-purpose Building At Lgu Farm Phase 2 With Project Identification Number Of 27-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Kitcharao Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Within One Hundred Sixty Five (165) Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders) And Its Scope Of Works Are As Follows: Item No. Description Quantity Unit Of Measure B.5 Project Billboard 1.00 Each B.7 (2) Construction Safety And Health 1.00 L.s B.9 Mobilization/demobilization 1.00 L.s 803 (1) A Structure Excavation (common Soil) 2.14 Cu.m 804(1)b Embankment From Common Borrow By Equipment 16.00 Cu.m 804(4) Gravel Fill 2.50 Cu.m 900 (8) Structural Concrete (class A, 28 Days) 18.66 Cu.m 902 (1) A Reinforcing Steel, Grade 60 2,850.62 Kg 903 (2) Formworks And Falseworks (for One Storey Building) 74.91 Sq.m. 1000 Soil Poisoning 10.20 Liter 1003 (1) C2 Marine Plywood On Metal Frame Ceiling 93.60 Sq.m. 1003 (1) E2 Ceiling(6mm, Metal Frame,prepainted Metal Panel) 43.2755 Sq.m 1005(1) Awning Window-steel Casement 9.88 Sq.m. 1005(1) Fixed Window-metal Frame 51.61 Sq.m. 1007(1)b Aluminum Glass Window (fixed) 11.80 Sq.m. 1009(1) Jalousie Windows 16.61 Sq.m. 1018(2) Unglazed Tiles 55.80 Sq.m. 1018(1) Glazed Tiles 54.65 Sq.m. 1027(1) Cement Plaster Finish 236.55 Sq.m. 1032 (1a) Masonry-painting, Varnishing, And Related Works 301.53 Sq.m. 1032(1)b Wood-painting, Varnishing, And Related Works 93.6 Sq.m. 1032(1)c Steel-painting, Varnshing, And Related Works 143.37 Sq.m. 1036(1) Polycarbonate Sheets 30.22 Ln.m 1043 (1) Pvc Doors And Frames 5.04 Sq.m 1046(1)a2 100 Mm Thick Non Load Bearing ( Including Reinforcing Steel) 102.37 Ln.m 1046 (2) A2 150mm Thck. Chb Non Load Bearing (including Reinforcing Steel) 31.80 Sq.m. 1047 (5) Structural Steel 2,777 L.s 1051(6) Stainless Steel Railings 1.00 L.s 1001(8) Sewerline Works 1.00 L.s 1001(9) Storm Drainage And Downspout 1.00 L.s 1002(4) Plumbing Fixtures 1.00 L.s 1002(24) Cold Water Lines 1.00 L.s 1001(11) Septic Vault 1.00 L.s 1001(5)b1 Catch Basin 1.00 L.s 1100(10) Conduit, Boxes, Fittings And Auxillary 1.00 L.s 1101(33) Wires And Wiring Devices 1.00 L.s 1102(1) Panel Board With Main Breaker 1.00 L.s 1103(1) Lighting Fixtures 1.00 L.s Spl-1 Fascia Board (wpc) 202 Pcs 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Municipality Of Kitcharao And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 4:00 Pm, Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 12- 29, 2024 From Given Address Below And Upon Payment Of The Applicable And Non-refundable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Attaching A Photocopy Of Official Receipt On Financial Documents During The Submission Of Bids. 6. The Municipality Of Kitcharao Will Hold A Pre-bid Conference On November 19, 2024, 10:30 A.m. At Municipal Conference Room, Municipal Hall Building, Kitcharao, Agusan Del Norte. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before December 2, 2024 At 1:30 P.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 2, 2024 At 1:30 P.m. At Municipal Conference Room, Municipal Hall Building, Kitcharao, Agusan Del Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Kitcharao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Riza E. Ballanca Bac Secretariat 8609, Kitcharao, Agusan Del Norte Contact Number: 09309175604 November 8, 2024 Date Issued Roberto R. Calubag, Jr. Bac Chairperson

Details: Description General Requirements -installation Of Project Billboard. -occupational Safety And Health Program. -mobilization And Demobilization. Demolition/ Removal Works -demolition Of Existing Cr Wall In Birthing Room -lnclosure Of Existing Door At Birthing Room Cr -removal Of Existing Sink In Birthing Room -removal Of Existing Windows In Birthing Room -demolition Of Wall In Birthing Room For Door Installation -demolition Of Wall In Ward Room For Door Installation -removal Of Existing Windows In Ward Room -demolition Of Exisiting Pwd Cr Structure Excavation -column Footing -wall Footing Carpentry Works -800 X 2100mm Fabricated Double Swing Door With Glass Panel And 50mm X 150mm Door Jamb And Complete Accessories. -800 X 2100mm Flush Type Solid Core Door With Door Jamb And Complete Accessories. -600mm X 2100mm Pvc Door With Louver With Door Jamb And Complete Accessories. -700 X 2100mm Flush Type Solid Core Door With Door With Door Jamb And Complete Accessories . -1400 X 2100mm Fabricated Double Swing Door With Glass Panel Kick Plates. -700 X 2100mm Sliding Wooden Door. -600mm X 600mm Awning Type Window With Analok Frame. -2-panels 1200mm X 1550mm Sliding Window (analok Frame W/ 6mm Bronze Glass). -0.8m X 1.7m Fabricated Janitor's Cabinet. Plumbing Works -waste Pipe -soil Pipe -water Pipe -placenta Pit -installation Of Lavatory -installation Of Sink And Faucets -installation Of Water Closets -installation Of Sink With Stand -installation Of Handheld Bidets -installation Of Grab Bars Gravel Bedding -column Footing -wall Footing -slab Steel Reinforcement -placenta Pit - Pwd Cr -mop Sink - Column -storage Room - Column Footing -ward Room Cr - Wall Footing - Door Entrance - Slab Steel Works -fabrication And Installation Of Steel Girt. -installation Of Channel Rafter. -installation Of C-purlins. -installation Of Steel Corbel. Masonry Works -placenta Pit -mop Sink -storage Room -ward Room Cr -door Entrance -ward Room -pwd Cr -waiting Area Roofing Works -installation Of Pwd Cr Roof. -installation Of Waiting Area Roof. -sealing Of Leaks On Health Center Roof Painting Works -steel Girt -channel Rafter -c- Purlins -steel Corbel Concrete Work, Formwork & Scaffolding -placenta Pit -mop Sink -pwd Cr Floor Drywall Partition -pwd Comfort Room Drywall Partition -installation Of Dry Wall Partition 1 As Shown In The Plan. -installation Of Dry Wall Partition 2 As Shown In The Plan. -installation Of Dry Wall Partition 3 As Shown In The Plan. -installation Of Dry Wall Partition 4 As Shown In The Plan. -installation Of Dry Wall Partition 5 As Shown In The Plan. Tile Works -installation Of 600mm X 600mm Unglazed Pwd Cr Floor Tiles. -installation Of 600mm X 600mm Glazed Pwd Cr Wall Tiles. -installation Of 600mm X 600mm Glazed Waiting Area Floor Tiles. Electrical Works -installation Of Additional Lightings , Switches ,convenience Outlet. -relocate Affected Switches And Convenience Outlet. -installation Ofaircon Outlets,wirings And Circuit Breaker. -replacement Of Existing Electrical Panelboard To A 12 Branches Electrical Panelboard. -replacement Of Existing Service Entrance Conductor To A 30.0mm2 Thhn Stranded Copper Wire. -install Secondary Rack With 2 Spool. -install Service Entrance Cap 25mm Diameter. I. Project Billboard (q = 2.00 Each) Includes 4' X 8' Tarpaulin, 8' X 8' Tarpaulin, 2"x3"x 14" Coco Lumber, 2"x3"x10" Coco Lumber, 2"x2"x8" Coco Lumber, Assorted Sizes C.w. Nails. Ii. Occupational Safety And Health Program (q = 1.00 L.s) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe. Iii. Mobilization / Demobilization (q = 1.00 Lot) Iv.demolition/ Removal Works (q = 62.33 Sq.m) Includes Demolition Of Existing Cr Wall In Birthing Room, Inclosure Of Existing Door At Birthing Room Cr, Removal Of Existing Sink In Birthing Room, Removal Of Existing Windows In Birthing Room, Demolition Of Wall In Birthing Room For Door Installation, Demolition Of Wall In Ward Room For Doorinstallation, Removal Of Existing Windows In Ward Room, Demolition Of Wall In Supply & Strorage Office, Demolition Of Exisiting Pwd Cr. V.structure Excavation (q = 13.98 Cu.m.) Vi.gravel Bedding (q = 1.00 Sq.m) Includes Gravel Bedding(w/ 5% Shrinkage Factor) Vi . Steel Reinforcement (q = 594.35 Kg.) Includes 12mm Dia. Dsb X 6m, 10mm Dia. Dsb X 6m, No. 16 G.i. Tie Wire. Viii. Masonry Works (q = 68.24 Sq.m.) Includes 100mm Thk. Chb (350psi), Portland Cement, Washed Sand. Ix. Concrete Work, Formwork & Scaffolding (q = 2.34 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 1/4" X 4' X 8' Thk. Marine Plywood, 2" X 2" X 10' Coco Lumber, 2" X 3" X 10' Coco Lumber, Assorted Sizes C.w. Nails X. Ceiling Works (q = 3.61 Sq.m.) Includes 4.5mm 4' X 8' Thk Fiber Cement Board, Metal Furring Double, 19mm X 50mm X 0.5mm Thk., 25mm X 25mm Wall Angle 3m, W-clip, Blind Rivets (1000pcs/box),1-1/2" Concrete Nails . Xi. Drywall Partition (q = 47.00 Sq.m.) Includes 4.5mm 4' X 8' Thk Fiber Cement Board, 0.5mm Thk. 2" X 3" X 3m Metal Studs, 0.5mm Thk. 2" X 3" X 3m Metal Track, 1 1/2" Metal Screw (900pcs/pck), Blind Rivets (1000pcs/box). Xii. Carpentry Works A. Janitor's Cabinet (q = 5.76 Bd.ft.) Includes 3/4" Thk. 1.2m X 2.4m Marine Plywood, 4" Stainless Steel T-bar Pull Handle, Concealed Full Overlay Hinges, 1" Finishing Nails, Wood Glue. B. Doors And Windows (q = 19.00 Set) Includes 1500 X 2100mm Fabricated Double Swing Door With Glass Panel And 50mm X 100mm Door Jamb And Complete Accessories; 800 X 2100mm Flush Type Solid Core Door With Door Jamb And Complete Accessories; 900mm X 2100mm Pvc Door With Louver With Door Jamb And Complete Accessories; 700 X 2100mm Flush Type Solid Core Door With Door With Door Jamb And Complete Accessories; 1400 X 2100mm Fabricated Double Swing Door With Glass Panel Kick Plates; 700 X 2100mm Sliding Wooden Door; 600mm X 600mm Awning Type Window With Analok Frame; 500mm X 1150mm Fix Glass Window (analok Frame W/ 6mm Bronze Glass); 2-panels 1200mm X 1550mm Sliding Window (analok Frame W/ 6mm Bronze Glass). Xiii. Plumbing Works (q = 1.00 Lot) Includes Water Closet + Lavatory, Standard Size W/complete Fittings & Accessories; Lavatory, 350mm-heavy Duty/american Standard; Sink With Stand (1000 X 500 X 800mm); Handheld Bidet With Complete Accessories; Faucet; Grab Bar Vertical Wall Support 32mm Dia. Ss304; Grab Bar 32mm Dia. X 800mm Ss304; Grab Bar 32mm Dia. X 600mm Ss304; Stainless Steel Two-way Angle Valve 1/2"x 1/2"; Stainless Steel One-way Angle Valve 1/2"x1/2"; 1/2"dia. G.i. Pipe; 1/2" X 1/2" X 36" Stainless Steel Flexible Water Hose; 1/2"dia. Pvc Coupling; 1/2"dia. Pvc Elbow; 1/2"dia. Pvc Tee; 1/2"dia. X 6" G.i. Nipple; 2"dia. X 3m Sanitary Pvc Pipe S-1000; 2"dia. P-trap With Plug And Sealing Ring; 2"dia. Pvc Wye; 2"dia. Pvc Clean Out W/ Plug And Sealing Ring; 2"dia. Pvc Elbow; 4"dia. X 3m Sanitary Pvc Pipe S-1000; 4"dia. Pvc Wye; 4"dia. Pvc Elbow; 4"dia. Pvc Clean Out W/ Plug And Sealing Ring; 4"dia. Pvc P - Trap W/ Plug & Sealing Ring; Teflon Tape; Pvc Solvent Cement. Xiv. Steel Works ( Q = 271.92 Kg.) Includes 25mm X 25mm X 4mm Thk. Angle Bar, 38mm X 38mm X 4mm Thk. Angle Bar, 50mm X 50mm X 4mm Thk. Angle Bar, 50mm X 75mm X 1.2mm Thk. C - Purlins,50mm X 100mm X 1.2mm Thk. C- Purlin, 10mmdia. Deformed Steel Bar, 12mm Dia. Deformed Steel Bar, 16mm Dia. Heavy Duty Grip Anchor Expansion Bolt, 16mm Dia. Full Threaded Rod, 16mm Dia. Hexagonal Flange Nut, Welding Rod (6011), 4" Grinding Disc, 4" Cutting Disc. Xv. Painting Works ( Q = 72.46 Sq.m.) Includes Red Oxide Metal Primer, Flatwall Enamel, Quick Dry Enamel, Paint Thinner, Plasolux Glazing Putty, Skimcoat, Concrete Primer, Masonry Putty, Gloss Latex, Acrytex Cast, Acrytex Reducer, 2" Paint Brush, 4" Paint Brush, 4" Paint Roller, 4" Paint Roller Foam,paint Tub, Assorted Sand Paper. Xvi. Roofing Works ( Q = 5.76 Sq.m.) Includes Pre-painted Metal Roofing Sheet Ga. 26 Long Span (rib Type), 4.5mm 4' X 8' Thk Fiber Cement Board, Blind Rivets (1000pcs/pck), Vulcaseal Sealant 1liter. Xvii. Tile Works ( Q = 11.04 Sq.m.) Includes 600 X 600 Mm Unglazed Tile, 600 X 600 Mm Glazed Tile, Portland Cement, Washed Sand, Tile Grout, 2kg/bag, Tile Adhesive, Heavy Duty (25 Kg), Tile Trim (2.5m) Steel. Xviii. Electrical Works (q = 1.00 Lot) Includes Electric Wire ,3.5mm2 Thhn Stranded Copper Wire; Electric Wire ,5.5mm2 Thhn Stranded Copper Wire; Electric Wire ,8.0mm2 Thhn Stranded Copper Wire; Electric Wire, 30.0mm 2 Thhn Stranded Copper Wire; Electrical Pvc 15mm; Junction Box 4x4";utility Box 2x4"; Single Gang Switch With Led Indicator 230vac; Two Gang Switch With Led Indicator 230vac; Ts Led Tube Batten Type Daylight 9w; Ceiling Socket 4 1/2 230v; Led Bulb 9w ,230v; 2 Gang Convenience Outlet; 15at Circuit Breaker 2 Pole, Plug In Type, 230v; 20at Circuit Breaker 2 Pole , Plug In Type ,230v; 30at Circuit Breaker 2 Pole , Plug In Type ,230v; Electrical Panelboard 12 Branches Plug In Type, 230v 2pole; 100 At Circuit Breaker , 2 Pole ,plug In Type, 230v; Service Entrance Cap 25mm Dia.; Secondary Rack 2 Spool Heavy Duty; Electrical Tape; Solvent Cement 100cc; Grounding Rod 5/8" X4.75 Ft. With Clamp.

Details: Description Invitation To Bid For: Supplies And Materials For The Contract –rehabilitation Of Mp Bldg- Kaimito 1. The Barangay Miranda, Through The General Fund: 20% Development Fund Intends To Apply The Sum Of Three Hundred Thirty-two Thousand One Hundred Two Pesos & Fifty-three Centavos Only (php. 332,102.53) Being The Approved Budget For The Contract (abc) To Payment Under The Pr No. 2024-10-002 Bids In Excess Of The Abc Shall Automatically Reject At Bid Opening. 2. The Barangay Miranda Now Invites Bids For Supply As Describe Hereunder: Rehabilitation Of Mp Bldg-kaimito Item No. Qty. Unit Specification Unit Cost Total Price 1 660 Bdft 2’ X 3’x 12 Coco Lumber 32.00 21,120.00 2 174 Bdft 2’ X 2’ X 10 Coco Lumber 32.00 5,568.00 3 10 Sheet ½ Ordinary Plywood 458.24 4,582.40 4 6 Kg 4’ Cw Nails 80.00 480.00 5 5 Kg 3’ Cw Nails 81.92 409.60 6 3 Kg 1 ½ Cw Nails 96.00 288.00 7 4 Roll Nylon String 65.00 260.00 8 87 Bags Portland Cement 284.80 24,777.60 9 5 Cu.m Washed Sand 1,536.00 7,680.00 10 10 Cu.m Washed Gravel 1,664.00 16,640.00 11 3 Cu.m Washed Gravel (gravel Base) 1,664.00 4,992.00 12 68 Length 16mm Deformed Bar 6m 593.09 40,330.12 13 22 Length 12mm Deformed Bar 6m 314.88 6,927.36 14 79 Length 10mm Deformed Bar 6m 232.51 18,368.29 15 2 Pc Hacksaw Blade Sandflex 65.00 130.00 16 4 Kg Gi Tie Wire #16 147.20 588.80 17 1427 Pcs 4” Chb 16.64 23,745.28 18 62 Bag Portland Cement 284.80 17,657.60 19 5 Cu.m Washed Coarse Sand 1,536.00 7,680.00 20 88 Length 10mm Deformed Bar 6m 232.51 20,460.88 21 3 Pcs Hacksaw Blade Sandflex 65.00 195.00 22 6 Kg Gi Tie Wire # 16 147.20 883.20 23 7 Length 2x3 Gi Tubular 1.5mm Thk 6m(rofter) 1,049.60 7,347.20 24 32 Length 2x3 Gi Cee Purlins 1.5mm Thk 6m (purlins) 841.60 26,931.20 25 4 Length 12mm Plain Round Bar 6m (x-brace) 380.80 1,523.20 26 2 Length 12mm Turn Buckle (x-brace) 210.00 420.00 27 4 Length 10mm Plain Round Bar 6m (sag Rod) 220.80 883.20 28 4 Kgs 6013 Special Welding Rod 204.80 819.20 29 5 Pcs 4” Cutting Disc 185.60 928.00 30 13 Sheet 0.4mm Thk Pre Painted Rib Type Roofing 1 X 10m 5,088.00 66,144.00 31 540 Pcs 40mm Tekscrew 3.00 1,620.00 32 1 Pc Tekscrew Adaptor 95.00 95.00 33 3 Tube Silicon Sealant Construction Grade 350.00 1,050.00 34 1 Pc Caulking Gun 577.40 577.40 **nothing Follows** Sub Total 332,102.53 Delivery Of Goods Is Required 10 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Nondiscretionary “pass/fail” Criteria As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of R.a 9184. Interested Bidders May Obtain Further Information From The Bac Office Thru Its Chairman, Brgy. Hall Of Miranda, Babak, Igacos And Inspect The Bidding Documents At The Address Given Below During Office Hours. Total Of Rehabilitation Of Mp Bldg-kaimito 332, 102.53 Grand Total 332, 102.53 A Complete Set Of Bidding Documents May Be Purchase By Interested Bidders November 4, 2024 From The Address Below And Upon Payments Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Hundredpesos Only (php. 500.00). The Lgu-brgy. Miranda, Bids And Awards Committee Will Hold A Pre-bid Conference On November 6, 2024 At 1:00 Pm In Margate Building 2nd Floor, 1 St Door Sitio Kaimito, Babak District, Island Garden City Of Samal, Which Shall Be Open Only To All Interested Parties Who Had Purchased The Bidding Documents. Bids Must Be Delivered To The Address Below On Or Before 12:00 Noon Of November 18, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause. Bid Opening Shall Be On November 18, 2024, 1:00 Pm At Margate Building 2nd Floor, 1 St Door Sitio Kaimito, Babak District, Igacos. Bids Will Be Opened In The Presence Of The Bidders Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Lgu-brgy. Miranda Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Toward, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Jennykhin E. Ruelan Bac Chairman Purok 5. Palmira Miranda Babak District Igacos 09053938790 Prepared By: Melmar W. Ledres Bac Secretariat Approve By: Jennykhin E. Ruelan Bac Chairperson Or Authorized Representative