Painting Tenders

Painting Tenders

Department Of Public Works And Highways - DPWH Tender

Civil And Construction...+1Bridge Construction
Philippines
Closing Soon2 Dec 2024
Tender AmountPHP 14.7 Million (USD 248.8 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental First District Engineering Office Gingoog City, Misamis Oriental, Region X Invitation To Bid For 25kk0014 – Widening Of Permanent Bridges - Kahulugan Br. (b01256mn) Along Gingoog-claveria-villanueva Rd (phase Iii) 1. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office, Through The Nga The National Expenditure Program (nep) Intends To Apply The Sum Of ₱ 14,700,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25kk0014 – Widening Of Permanent Bridges - Kahulugan Br. (b01256mn) Along Gingoog-claveria-villanueva Rd (phase Iii). 2. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Widening Of Permanent Bridges - Kahulugan Br. (b01256mn) Along Gingoog-claveria-villanueva Rd (phase Iii) Contract Id No. : 25kk0014 Locations : Gingoog City, Misamis Oriental Scope Of Works : Pccp (reinforced & Unreinforced), Pccp Shouldering, Slope Protection And Asphalt Overlay With Thermoplastic Paints. Approved Budget For The Contract : ₱ 14,700,000.00 Contract Duration : 197 Calendar Days Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Size Range Small B, Pcab License Category Of (c & D) For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. The Contractor Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification. 4. Interested Bidders May Obtain Further Information From Department Of Public Works And Highways – Misamis Oriental First District Engineering Office And Inspect The Bidding Documents At Dpwh - Misamis Oriental First District Engineering Office, Gingoog City During Weekdays From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 11, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of ₱25,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Will Hold A Pre-bid Conference On November 18, 2024, 02:30 P.m. At Bac-conference Room, 3rd Floor, Dpwh-mofdeo, And/or Through Videoconferencing/webcasting Via Live Streaming: (youtube Page) Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq Which Shall Be Open To Prospective Bidders. 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. The Deadline For Issuance/ Downloading Of Bidding Documents (buying Of Bidding Documents) Will Be On December 02, 2024 Until 08:30 A.m. In Accordance With The Department's Citizen's Charter (attached As Annex "a") And Unnumbered Memorandum Dated December 27, 2001 (attached As Annex "b"), Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary C. Letter Of Intent (for Foreign Funded Projects) Bids Must Be Duly Received By The Bac Secretariat At Bac-conference Room, 3rd Floor, Dpwh - Misamis Oriental First District Engineering Office For Manual Submission Or At Electronicbids_misamisoriental1@dpwh.gov.ph For Electronic Submission On Or Before December 02, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 02, 2024, Immediately After The Deadline For The Submission Of Bid, At Bac-conference Room, 3rd Floor, Dpwh-mofdeo And Through Live Streaming: Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq (youtube Page) Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. In Consistent Of The Do 127 S 2018, “if At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid”. 11. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Marcelino O. Cabeguin, Jr., A.e.r. April Jane T. Pecasales Oic- Assistant District Engineer Engineer Ii Bac Chairperson Head, Bac Secretariat Dpwh-misamis Oriental 1st Deo Dpwh-misamis Oriental 1st Deo Brgy. 26, Gingoog City, Misamis Oriental Brgy. 26, Gingoog City, Misamis Oriental Tel/ No.: (088) 861-1185 Tel/ No.: (088) 861-1185 Email Address: Dpwhmofdeo@yahoo.com Email Address: Dpwhmofdeo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents : Www.philgeps.gov.ph : Www.dpwh.gov.ph For Online Bid Submission : Electronicbids_misamisoriental1@dpwh.gov.ph November 11, 2024 Approved By: Marcelino O. Cabeguin, Jr., A.e.r. Oic- Assistant District Engineer Bac Chairperson

City Of Canlaon Tender

Civil And Construction...+1Construction Material
Philippines
Closing Soon25 Nov 2024
Tender AmountPHP 661.2 K (USD 11.1 K)
Details: Description Republic Of The Philippines City Of Canlaon Office Of The Bids And Awards Committee Invitation To Bid For The Early Procurement Activity (epa) For The Procurement Of Construction Materials For The Improvement Of Day Care Center The Local Government Of Canlaon City, Through The Aip 2025 Intends To Apply The Sum Six Hundred Sixty-one Thousand, Two Hundred Twenty-four & 89/100 (p661,224.89) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Various Construction Materials For Use In The Improvement Of Day Care Center, Sitio Palaming, Brgy. Binalbagan, Canlaon City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Award Of The Contract Is Subject To The Effectivity Of The General Appropriations Act (gaa) For Fy 2025. The Local Government Of Canlaon City Is Conducting This Procurement Through The Early Procurement Activity (epa) For Fy 2025 To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services, Consistent With The Gppb Resolution No. 14-2019 Dated July 17, 2019. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e Fy 2025), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Local Government Of Canlaon City, Will Evaluate The Bid Proposal And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be The Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget. C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Validity, If The Bidder Refuses To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. The Local Government Of Canlaon City, Now Invites Bids For The Supply And Delivery Of Various Construction Materials For Use In The Improvement Of Day Care Center, Sitio Palaming, Brgy. Binalbagan, Canlaon City. Delivery Of The Goods Is Required 7 Calendar Days After Issuance And Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Ten Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184 Interested Bidders May Obtain Information For The City Government Of Canlaon City Thru The Office Of The Bids And Awards Committee And Inspect Bidding Documents During Office Hours (8:00am To 5:00pm), Monday To Friday. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On November 4, 2024 To November 25, 2024 Until 10:00 Am At The Office Of The Bids And Awards Committee, Canlaon City, And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (p1,000.00) Pesos. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Facsimile. The Local Government Of Canlaon City Will Hold A Pre-bid Conference On November 12, 2024 – 2:00 Pm At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City, Which Shall Be Open To Prospective Bidders Bids Must Be Received By The Bac Secretariat Through Manual Submission On Or Before November 25, 2024, 10:00 Am At The Office Of The Bids And Awards Committee, 2nd Floor, City Hall Building, Canlaon City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On November 25, 2024, 10:00 Am At The At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. For The Purpose Of Constituting A Quorum, Either The Physical And Virtual Presence Of The Bac Member Shall Be Considered Pursuant To Gppb Resolution No. 09-2020. The Local Government Unit Of Canlaon Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Alice D. Mcguiggan Bac Secretariat Mobile No. 0917-561-7931 Email Address: Bacofficelgucanlaon@yahoo.com Date Of Posting: November 3, 2024 Doris Y. Flores Bac Chairperson Republic Of The Philippines City Of Canlaon Bids And Awards Committee Control No.: #1 Bid Form Name Of Project: Improvement Of Day Care Center Brief Description: Supply And Delivery Of Various Construction Materials Location: Sitio Palaming, Brgy, Binalbagan, Canlaon City Bill Of Quantities Stock No. Quantity Unit Item Description Unit Cost Unit Cost Total Cost 1. 1 Set 400mmx600mm, Stainless Sink W/ Accessories (gooseneck Faucet, Flexible Hose) 3,000.00 2. 1 Pc 8' X 8', Tarpaulin, Billboard (see Ceo For Sample) 4,375.00 3. 10 Cu.m. Aggregate Base Course (item 201) 1,350.00 4. 16 Length Angle Bar (1" X 1" X 1/8") 435.00 5. 3 Box Blind Rivets, (1/8" X 1/2") 376.67 6. 1 Pc Bolt, 1/2"ɸ X 6", B.i., Full Thread With Nut And Washer 85.00 7. 4 Cu.m. Boulder 1,236.00 8. 100 Pcs Cable Ties, 8 X 300 Mm 12.00 9. 21 Length Carrying Channel (11mm X 37mm X 11mm X 1.6mm X 5m) 279.00 10. 1 Set Cement Epoxy 4,000.00 11. 1,725 Pc Chb (4" X 20cm X 40cm) 18.50 12. 2 Kgs Concrete Nails, (2") 125.67 13. 30 Mtrs. Conductor Wire, 14.0mm² Thw, Cu. 132.50 14. 200 Mtrs. Conductor Wire, 3.5mm² Tw, Cu. 52.00 15. 15 Mtrs. Conductor Wire, 8.0 Mm² Tw, For Grounding 113.00 16. 10 Pcs Conduit Clamp, 25mm ɸ Upvc, Orange Color W/ Concrete Nail 5.25 17. 1 Lngth Conduit Pipe, 25mm ɸ X 3m', Rsc 337.50 18. 1 Pc Connector Ground Rod For ⅝"ɸ, Galv. 102.00 19. 5 Pcs Connector, Compression, Parallel #100 150.00 20. 3 Sets Convenience Outlet, Duplex, Universal, Flush Type, Anam Or Equivalent 197.00 21. 40 Sheet Corrugated Gi Sheet (12'), Ga 26 980.00 22. 20 Length C-purlins (1 1/2" X 4"), G-16 800.00 23. 39 Length C-purlins (2" X 3"), G-16 778.33 24. 20 Length C-purlins (2" X 6"), G-16 1,236.33 25. 6 Pc Cutting Disc, (4" Ø) 577.67 26. 2 Kgs Cwn, (1 1/2") 100.50 27. 2 Kgs Cwn, (2 1/2") 96.00 28. 5 Kgs Cwn, (3") 91.50 29. 6 Kgs Cwn, (4") 89.00 30. 218 Length Deformed Bar, (10mmø X 6m) 238.33 31. 21 Length Deformed Bar, (12mmø X 6m) 333.33 32. 3 Pc Diamond Tile Cutter Blade (4" Ø) 525.33 33. 6 Pc Disc Cutter (14" Ø) 316.33 34. 60 Length Double Furring (17mm X 49mm X 17mm X 0.6mm X 5m) 217.00 35. 1 Set Drill Bit 12mmø (for Masonry) 250.00 36. 10 Set Drill Bit, (1/8" Ø), For Steel 175.50 37. 3 Rolls Electrical Tape, (0.16mm X 19mm X 16yrds), Plastic 75.00 38. 1 Pc Entrance Cap, 25mm ɸ, Rsc 162.00 39. 10 Gal Epoxy Primer Red Oxide W/ Catalyst 1,358.00 40. 9 Cu.m. Fine Sand 1,347.33 41. 100 Mtrs. Flexible Conduit Pipe, 20mmɸ Upvc, Coilable, Orange Color 78.75 42. 10 Mtrs. Flexible Conduit Pipe, 25mm ɸ Upvc, Orange Color, Coilable 113.00 43. 50 Pc Floor Tiles, (400mm X 400mm) 150.00 44. 6 Length Gi Pipe (2"), Sch. 40 2,098.33 45. 1 Lngth Gi Pipe 3"ɸx20' Sched. 40 4,231.50 46. 8 Sheet Gi Plain Sheet, Ga 26 X 8' (0.40 Mm) 670.00 47. 23 Kgs Gi Tie Wire, Ga 16 102.67 48. 5 Cu.m. Gravel - 3/4" 2,378.00 49. 3 Pc Grinding Disc (4" Ø) 320.00 50. 1 Lngth Ground Rod, ⅝" ɸ X 10' , Galv. Steel 933.00 51. 2 Pc Hacksaw Blade, Lenox, 24tpi 82.67 52. 4 Sheet Hardiflex (1/2" X 4' X 8') 1,815.34 53. 27 Sheet Hardiflex (1/4" X 4' X 8') 907.67 54. 8 Pcs. Junction Box, 4" X 4" Upvc, Orange Color W/ Cover And Screws 54.00 55. 5 Pcs Led Bulb (9w) 120.00 56. 4 Sheet Marine Plywood (1/4" X 4' X 8') 649.00 57. 0.3 Gal Mayon Lacquer Thinner 782.00 58. 1 Pc Paint Brush, 1 1/2" 41.00 59. 3 Pc Paint Brush, 4" 105.00 60. 1 Assy. Panel Board, 40at/50af, Bolt-on, 240 V, Complete With 2-15at And 2-20at 2-pole, 240v, Bolt-on Branch Circiuts 8,000.00 61. 6 Length Plain Bar (10mmø X 6m) 256.00 62. 50 Pcs. Poly Flex Connector For Flexible Hose 20mm' ɸ 10.00 63. 7 Pc Porcelain Tiles, (600mm X 1200mm) 405.00 64. 313 Bags Portland Cement, Type I, 40 Kgs. (grand) 310.00 65. 1 Pc. Pull Box, 12" X 12" X 6" Depth, Melamine Coated W/ Cover 1,100.00 66. 5 Pc Putty Knife, 5" Blade (medium) 150.00 67. 2 Pc Putty Plate 20.50 68. 4 Length Pvc Blue Pipes (1/2" Ø) 110.00 69. 5 Pc Pvc Clean-out W/ Plug (4"ø) 111.50 70. 8 Pc Pvc Elbow (90ᵒ X 1/2") 15.50 71. 5 Pc Pvc Female Adapter (1/2"ø) 23.00 72. 3 Can Pvc Solvent (200 Ml) 110.00 73. 4 Pc Pvc Tee (1/2"ø) 19.50 74. 2 Pc Pvc Water Faucet 182.50 75. 5 Cu.m. Ready Mixed 1,094.00 76. 433.3 Bd-ft Rough Lumber (2" X 2" X 10') - 130 55.00 77. 5 Pcs Round Vertical Downlight Recessed Type, Glossy Reflector, 6" 280.00 78. 15 Pcs. Sand Paper #180 35.50 79. 5 Pcs. Sand Paper #36 117.50 80. 5 Pc Sanitary Elbow (3"ø X 90ᵒ) 67.50 81. 2 Pc Sanitary Elbow (4"ø X 45ᵒ) 81.00 82. 2 Pc Sanitary Elbow (4"ø X 90ᵒ) 107.50 83. 6 Pc Sanitary Tee (3"ø) 104.00 84. 1 Set Secondary Rack With Sool Insulator 1-3/4" Dia, Groove, Brown Porcelain Hd 400.00 85. 100 Mtrs. Service Drop Wire, 14.0mm², Duplex, All Aluminum 41.00 86. 2 Sets Single Pole Switch, Flush Type, Or Equivalent 148.00 87. 14 Bags Skim Coat, 25kgs 709.50 88. 2 Pc Stainless Floor Drain (4" X 4") 239.00 89. 1 Pc Steel Tape, Stanley, Tylon 8m/16' 300.00 90. 1 Pc Teflon Tape (3/4" X 30m) 44.00 91. 2 Pc Tekscrew Adaptor 28.00 92. 342 Pc Tekscrew, (5/16" X 2 1/2") 4.75 93. 1,200 Pc Tekscrew, (5/16" X 2") 4.00 94. 2 Pcs. Terminal Lug, Sa 135, Solderless 196.00 95. 4 Bags Tile Adhesive Cement, 25kgs 452.00 96. 15 Kgs Tile Grout 97.50 97. 10 Length Tile Trim (1/2" X 2.40m) 320.00 98. 1 Gal Time Out Body Filler 948.50 99. 2 Pc Toilet Paper Holder 300.00 100. 1 Sets Triplex Switch, Flush Type, Or Equivalent 350.00 101. 6 Length Upvc Sanitary Pipes, S-1000 (3"ø X 3m) 827.00 102. 5 Length Upvc Sanitary Pipes, S-1000 (4"ø X 3m) 1,127.00 103. 2 Pc Upvc Wye (4"ø) 194.50 104. 6 Pcs. Utility Box, 2"x 4" Upvc, Orange Color 32.00 105. 27 Length Wall Angle (1mm X 25mm X 25mm X 2.4m 80.50 106. 112 Pc Wall Tiles, (400mm X 400mm) 120.00 107. 20 Cu.m. Washed Sand 1,325.00 108. 2 Unit Water Closet, 6l, Hcg W/ Accessories 9,620.50 109. 21 Pc W-clip/double Furring Clip 18.00 110. 22 Kgs Welding Rod, (e6013) 175.67 111. 1 Gal Zinc Chromate (yellow) 1,950.00 Total Brand Model:_____________ Delivery Period:______________________ Warranty: After Having Carefully Read & Accepted Your General Conditions. I/we Quote On The Item/s Price/s Noted Above. Total Bid Price (in Words) Bid Security: Amount: Submitted By: Bidder/supplier Date:_________________________

Province Of South Cotabato Tender

Electronics Equipment...+2Machinery and Tools, Electrical and Electronics
Philippines
Closing Soon28 Nov 2024
Tender AmountPHP 71.4 K (USD 1.2 K)
Details: Description Standard Form Number: Sf-good-60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Republic Of The Philippines Provincial Government Of South Cotabato Bids And Awards Committee Capitol Compound, Alunan Avenue, City Of Koronadal Tel. No. (083) 228-9951 1. All Entries Must Be Handwritten (legible)/ Typewritten 2. Delivery Period Within 10 Calendar Days Upon Receipt Of The Notice To Proceed Note: Date: Svp 24 - 1078 - A November 21, 2024 Quotation No. Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than November 28, 2024 12:00 Noon Provincial Legal Officer Bac Chairman (sgd.) Atty. Marnito B. Cosep 3. Warranty Shall Be For Period Of Three (3) Months For Supplies And Materials, One (1) Year For Equipments, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of 120 Days 5. Interested Suppliers Are Required To Submit Their Eligibility Documents Such As Valid And Current Mayor’s Permit/business Permit, Philgeps Registration Number ________, And Income/business Tax Return (for Abcs Above 500k) During The Submission Of Price Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered (if Applicable) 7. Omnibus Sworn Statement Must Be Submitted During Submission Of Offer/s Or Before Issuance Of Notice Of Award.(for Abcs Above P50k) Note: Suppliers With Updated Eligibility Documents On File At The Bids And Awards Committee, May No Longer Require Its Re-submission. Quotation Per Item Item No. Item & Description Estimated Unit Of Abc Qty. Unit Of Total Cost Issue Unit Cost Construction Supplies 1 Ppr Union , - Plain, 1’’ 340.00 3 Pcs Hardware And Carpentry Tools 2 Paint , Enamel, Gloss, Choco Brown 850.00 5 Gals X-x-x Page 2 Follows X-x-x Note: "please Indicate Brand" Note: For The Use Of Scph Source Of Fund: 4421-scph-5-02-03-990-mooe-24-02-12005 Approved Budget: P 5,270.00 Brand And Model Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. Email Address Date Powered By Ppdo - Itu Powered By Ppdo - Itu Prepared By: Bac-shainalyn; Pr.no.24 - 0518d Page 1 Of 3 Standard Form Number: Sf-good-60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Republic Of The Philippines Provincial Government Of South Cotabato Bids And Awards Committee Capitol Compound, Alunan Avenue, City Of Koronadal Tel. No. (083) 228-9951 1. All Entries Must Be Handwritten (legible)/ Typewritten 2. Delivery Period Within 10 Calendar Days Upon Receipt Of The Notice To Proceed Note: Date: Svp 24 - 1078 - A November 21, 2024 Quotation No. Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than November 28, 2024 12:00 Noon Provincial Legal Officer Bac Chairman (sgd.) Atty. Marnito B. Cosep 3. Warranty Shall Be For Period Of Three (3) Months For Supplies And Materials, One (1) Year For Equipments, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of 120 Days 5. Interested Suppliers Are Required To Submit Their Eligibility Documents Such As Valid And Current Mayor’s Permit/business Permit, Philgeps Registration Number ________, And Income/business Tax Return (for Abcs Above 500k) During The Submission Of Price Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered (if Applicable) 7. Omnibus Sworn Statement Must Be Submitted During Submission Of Offer/s Or Before Issuance Of Notice Of Award.(for Abcs Above P50k) Note: Suppliers With Updated Eligibility Documents On File At The Bids And Awards Committee, May No Longer Require Its Re-submission. Quotation Per Item Item No. Item & Description Estimated Unit Of Abc Qty. Unit Of Total Cost Issue Unit Cost 3 Ceiling Fan , 16" Diameter Orbit, Steel Blade 5,395.00 5 Pcs 4 Exhaust Fan , 12" Wall Type 2,100.00 4 Pcs 5 Exhaust Fan , 10 Inchesceiling Type 2,600.00 3 Pcs X-x-x Page 3 Follows X-x-x Note: "please Indicate Brand" Note: For The Use Of Scph Source Of Fund: 4421-scph-5-02-03-990-mooe-24-02-12005 Approved Budget: P 43,175.00 Brand And Model Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. Email Address Date Powered By Ppdo - Itu Powered By Ppdo - Itu Prepared By: Bac-shainalyn; Pr.no.24 - 0518d Page 2 Of 3 Standard Form Number: Sf-good-60 Revised On: May 24, 2004 Standard Form Title: Request For Quotation Republic Of The Philippines Provincial Government Of South Cotabato Bids And Awards Committee Capitol Compound, Alunan Avenue, City Of Koronadal Tel. No. (083) 228-9951 1. All Entries Must Be Handwritten (legible)/ Typewritten 2. Delivery Period Within 10 Calendar Days Upon Receipt Of The Notice To Proceed Note: Date: Svp 24 - 1078 - A November 21, 2024 Quotation No. Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than November 28, 2024 12:00 Noon Provincial Legal Officer Bac Chairman (sgd.) Atty. Marnito B. Cosep 3. Warranty Shall Be For Period Of Three (3) Months For Supplies And Materials, One (1) Year For Equipments, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of 120 Days 5. Interested Suppliers Are Required To Submit Their Eligibility Documents Such As Valid And Current Mayor’s Permit/business Permit, Philgeps Registration Number ________, And Income/business Tax Return (for Abcs Above 500k) During The Submission Of Price Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered (if Applicable) 7. Omnibus Sworn Statement Must Be Submitted During Submission Of Offer/s Or Before Issuance Of Notice Of Award.(for Abcs Above P50k) Note: Suppliers With Updated Eligibility Documents On File At The Bids And Awards Committee, May No Longer Require Its Re-submission. Quotation Per Item Item No. Item & Description Estimated Unit Of Abc Qty. Unit Of Total Cost Issue Unit Cost 6 Compressor , 208-230v 60hz, 1 Phase Lra 90 R22 Refrigerant 23,000.00 1 Unit X-x-x Nothing Follows X-x-x Note: For The Use Of Scph Source Of Fund: 4421-scph-5-02-03-990-mooe-24-02-12005 Approved Budget: P 23,000.00 Brand And Model Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. Email Address Date Powered By Ppdo - Itu Powered By Ppdo - Itu Prepared By: Bac-shainalyn; Pr.no.24 - 0518d Page 3 Of 3

Department Of Agriculture Tender

Automobiles and Auto Parts...+1Agriculture or Forestry Works
Philippines
Closing Date9 Dec 2024
Tender AmountPHP 750 K (USD 12.6 K)
Details: Description Invitation To Bid For The Procurement Of 5 Units Multi-tiller Cultivator Under Organic Agriculture Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Organic Agriculture Program Intends To Apply The Sum Of Seven Hundred Fifty Thousand Pesos (ᵽ 750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 5 Units Multi-tiller Cultivator Under Organic Agriculture Program Fy 2025 With Project Identification No.: Itb-2025-10-027 . Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 5 Units Multi-tiller Cultivator Walking-type Agricultural Tractor (rotary Tilling-type) I. Design And Performance Prime Mover: Four-stroke, Air-cooled, Single-cylinder, Gasoline Engine Rated Powe: 4.8 Kw (6.5hp), Minimum Starting System: Rope Recoil Fuel Consumption: Not More Than 1.5 Li/hr Engine Fuel Tank Capacity: 3.5 Liters, Minimum Field Capacity: 0.0625 Ha/hr, Minimum Average Depth Of Tillage: 65 Mm, Minimum Average Width Of Tillage: 1000 Mm Minimum Shall Be Free From Any Manufacturing Defects That May Be Detrimental To Its Operation All Metal Surfaces Shall Be Painted Properly Ii. Attachments And Accessories "a. Hoe Set (at Least 36 Cm Diameter) B. Rear Running Wheel C. L-shaped Tilling/rotary Blades D. Plough (1 Pc) E. Metal Wheel (pair) F. Weeding Wheel (pair) G. Ridger (1 Pc) H. Water Pump And Pto Mount (1 Set)" Iii. Safety Noise Level: 95db (a), Maximum During Operation, If Exceeded, An Ear Protection Device Must Be Provided For Each Unit. For Operator's Safety, The Following Shall Be Provided: Belt-guard Or Cover Mud-guard Rubber Hand Grip Iv. Maintenance Provided With Set Of Manufacturer's Standard Tools V. List Of Applicable Paes/pabes/pns/bafs Paes For Walking Type-agricultural Tractor (rotary Tilling Type) Paes For Small Engine Paes For Guidelines On After-sales Service Paes For Agricultural Machinery - Operator's Manual Vi. Other Requirements With Original Equipment Manufacturers (oem) Operators Manual With One (1) Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary Warranty Card For Each Unit Shall Be Provided By The Winning Bidder/supplier Upon Delivery Certification That The Bidder/supplier Shall Provide Warranty And After-sales Service Conforming To Pns/pabes 192:2024 - After-sales Service — Guidelines With Reflectorized "da-calabarzon" Logo With Valid And Passing Test Report Issued By Amtec Or Other Accredited Testing Center Certification That The Bidder/supplier Shall Provide Fuel And Technician/operator During Demonstration And Training Of The Operator/recipient Certification That The Bidder/supplier Shall Provide Fuel, Engine Oil And Technician/operator During Acceptance Testing. The Bidder/supplier Shall Ensure That The Machine And Its Engine Is Already Subjected To Break-in Prior To Conduct Of Acceptance Testing. Certification That All Units Shall Be Demonstrated And The Recipients Shall Be Trained In Proper Operation, Routine Maintenance, After-sales And Warranty Coverage Conduct Of Acceptance Testing Of Randomly Selected Units Upon Delivery Prior To Acceptance And Payment Of The Contractor. The Number Of Units Will Be Determined Using Pns/paes/pabes - Agricultural Machinery - Method Of Sampling. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers, Accreditation And Classification (namdac) Certificate Of Accreditation With Permit To Operate (pto) And Certificate Of Conformity (cc) Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 All Technical Specifications Shall Be Signed And Sealed By Professional Agricultural And Biosystems Engineer (abe) With Valid Prc License And Professional Tax Receipt (ptr) In Consonance With Ra 10915 Place Of Delivery: Apco Offices Calabarzon Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (ᵽ1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On November 27, 2024 11:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before December 9, 2024 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 9, 2024 11:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: November 19, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

CITY OF CARCAR, CEBU Tender

Telecommunication Services
Philippines
Closing Date5 Dec 2024
Tender AmountPHP 4.9 Million (USD 84.5 K)
Details: Description Item No. Item Description Qty. Unit Unit Price Total Price Improvement Of The Monitoring And Alert System Of The Operation Center 1 Lot 1 A. Fiber Optics Structured Cabling (1 Lot) Technical Specifications: "• (9,000 Meters) Fiber Optic Cable , 8 Core, G.657 Standard Compliant, Single Mode, With Figure 8‐dimension 250±15μm, Stranded Steel Wire Messenger, Colored Coating Fiber Brown,gray,white,red,black,1310nm≤0.4 (1550nm≤0.3) Db/km Attenuation,(1550nm≤18.0) Ps/nm.km Dispersion, Self‐supporting Cable Intended For Outdoor Aerial Installation " "• (5,000 Meters) 1 Core 3 Steel Wire Outdoor Ftth Fiber Optic Drop Wire Cable, Mode : Single‐mode Fiber : Single Core, Length : 500m / 1km, High Quality, Wavelength : 1310,1550 Nmapplication: Telecome Network, Catv Network, Ethernet Network, Optic Communication Equipment " "• (1 Unit) Optical Line Terminal With Up To 10gbps Uplink, Supports At Least 2 Pon Active Ports And 128 Optical Network Units, Redundant Power Supply, 19"" Rack‐mount, Onu Automatic Registration, Vlan, Traffic Shaping, 220vac " "• (30 Pieces) Optical Network With 4 Fast Ethernet Ports, Wifi Ap, Optical Network Port, Plug And Play, Automatic Detection, Vlan, And With Dhcp Server Relay Features " "• (2 Units) 16 Core Optical Fiber Distribution Box With Hoop 1:16 Plc Splitter Fiber Termination Box, Cassette Plc Splitter 1x2 1x4 1x8 1x16 Ftth Sc Upc 1*8 Fiber Optical Splitter Sc/upc Plc Splitter Cassette Box " "• (1 Unit) Fiber Patch Panel 12c Lc Adapter And Pigtail, 19"" 1u Fixed Type,with 20cm Depth, Fully Loaded " "• (1 Unit) Fiber Switch, 8 Ports, 1g, At Least 2 Sfp 10g (core Switch), 220vac " • (18 Sets) Fiber Optic Nap Closure "• (16 Units) Switch Poe, 4 Ports,100/1000, At Least 2 Sfp 1g, 220vac " • (8 Units) Optical Module, Tx1550nm/1.25g,rx1310nm/1.25g,lc, Single Mode And Single Fiber,20km,0~70℃,sfp "• (1 Lot) Fiber Patch Cord, Lc‐lc 1.5‐1.8m, Single Mode, Industrial Grade " • (1 Lot) Single Mode Media Converter Industrial Grade 2 B. Installation Of Equipments (1 Lot) Technical Specifications: "• (12 Units) 8 Channel Network Video Recorder, 2 Sata Hdd Maximum Storage, Real‐time Live Display Of Up To 8 Cctv Cameras Input , Motion Detection, Blind Video Loss, Interface For Ptz Camera Controller, Buzzer Alarm Trigger, Smart Hdd Management, Built‐in Web Server Management System, At Least 1 Ch Vga Out, 1ch Hdmi Out, 220vac " • (1 Unit) Network Video Recorder 32 Channel, H.265+/h.265/h.264+/h.264 Video Formats, Up To 32‐ch Ip Cameras Can Be Connected, Intelligent Analytics, Up To 24‐ch Perimeter Protection, Up To 16‐ch Facial Recognition For Video Stream, Or Up To 32‐ch. Facial Recognition For Face Picture, Up To 12‐ch Video Structuralization, Adopt Stream Over Tls Encryption Technology Which Provides More Secure Stream Transmission Service, Anr (automatic Network Replenishment) Technology Ensures Network Camera Video Torage Reliability, Up To 8 Sata Interfaces For Hdd Connection, Adopt Algorithm To Reduce False Alarm, Effectively Reduces The False Alarm Caused By Tree Branches, Leaves, Shadow, Light, Vehicles, Small Animals, Etc.extracting The Face Picture, Human Body And Vehicle Features From Live Videos, Which Is Used For The Tracking And Retrieval Of Human And Vehicles. "• (1 Unit) 4 Mp Anpr Network Camera, High Quality Imaging With 4 Mp Resolution, Clear Imaging Against Strong Back Light Due To 140 Wdr Technology, License Plate Recognition, Efficient H.265+ Compression Technology To Save Bandwidth And Storage, Water And Dust Resistant (ip66) And Vandal Proof (ik10), Road Traffic And Vehicle Detection, With Embedded Based License Plate Capture And Recognition Algorithms, The Camera Alone Can Achieve Plate Capture And Recognition. The Algorithm Enjoys The High Recognition Accuracy Of Common Plates And Complex‐structured Plates, Blocklist And Allowlist Are Available For Plate Categorization And Separate Alarm Triggering. Max. Resolution 2688 × 1520, Day & Night Ir Cut Filter Blue Glass Module To Reduce Ghost Phenomenon, Focal Length & Fov3.8 To 16 Mm, Horizontal Fov: 109.1° To 29.6°, Vertical Fov: 61.3° To 16.8°, Diagonal Fov: 125.1° To 33.9° 11 To 40 Mm, Horizontal Fov: 39.1° To 12.1°, Vertical Fov: 21.4° To 6.8°, Diagonal Fov: 45.8° To 13.9°, Network Storagenas (nfs, Smb/cifs), Auto Network Replenishment (anr) Together With High‐end Hikvision Memory Card, Memory Card Encryption And Health Detection Are Supported. " "• (45 Units) 4 Mp 2.8mm Lens Fixed Bullet Network Camera, High Quality Imaging With 4 Mp Resolution, Excellent Low‐light Performance, Efficient H.265+ Compression Technology, Water And Dust Resistant (ip67), 24/7 Colorful Imaging Day And Night " • (2 Units) 50 Inches Led Profesional Branded Smart Tv • (16 Units) Surveillance 6 Tb Hard Disk Drive "• (1 Set) Desktop Computer, At Least 12 Cores, 20 Threads, 25mb Smart Chache, 12mb L2 Total Cache, 2.10ghz Base Frequency, (2 Pcs.) 8gb Ddr4 3200 Ram, 1tb Hdd 7200rpm Sata 6gb/s 256mb Cache, With Compatible Motherboard, With Compatible Video Card, 19"" Led Monitor Hdmi With Hdmi Cable, 700watts True Rated Power Supply And Avr, With Matx Chassis And Licensed Windows Operating System " "• (16 Pcs) Pole, 15ft. Gi Standard Steel, 3""diameter Size, With Base Plate And Painted " 3 C. Labor Cost (1 Lot) Technical Specifications: Scope Of Work: *restoration Of Old Cameras *complete Installation And Configuration Of Cameras, Nvrs, Monitors And Other Equipments *wiring Layouting And Installation *conduit Layouting And Installation *terminations, Tracing And Loop Checking And Fiber Optics Splicing And Testing *installation And Configuration Of Computer Software For Cctv Management (lifetime License) *cctv Programming, Testing, Commissioning *training Of Users And Documentation For Final Turn Over The Following Does Not Include In The Scope Of Work: *electrical Wiring Of Main Power Supply Circuitry *scaffoldings, Lifters And The Likes.. *major Masonry And Inground/earth Excavation Works D. Warranty 1. Two(2) Years Warranty. 2. Lifetime Service Free Of Charge On Cctv Cameras And Nvrs. What Is Not Covered On Lifetime Free Services: *2a. Free Service Only Covers Wear And Tear Or Failure Of The Equipments Arising Under Normal Usage And Proper Maintenance. They Do Not Cover Any Malfunction, Failure Or Defect Resulting From Misuse, Abuse, Neglect, Alteration, Modification Or Repair By Anyone Other Than An Authorized Service Personnel. *2b. Any Damage Or Malfunction Inflicted By The User Or Other External Sources, Or Any Failure To Comply With The Warnings And Instructions In The Operation's Manual Is Not Covered *2c. End Of Life And End Of Support From The Manufacturer Total Brand And Model: Delivery Period: Warranty: Price Validity: After Having Read And Accepted Your General Conditions, I/we Quote Your On The Item At Price Noted Above. Printed Name / Signature Tel. No./ Cellphone No./e-mail Address Date: __________________________________

Department Of Public Works And Highways - DPWH Tender

Civil And Construction...+1Road Construction
Philippines
Closing Date5 Dec 2024
Tender AmountPHP 54.4 Million (USD 922.3 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Misamis Oriental First District Engineering Office Gingoog City, Misamis Oriental, Region X Invitation To Bid For 25kk0005 – Road Widening - Primary Roads - Butuan City-cagayan De Oro City-iligan City Rd - K1321 + 277.70 - K1321 + 883, K1322 + 069 - K1322 + 334 1. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office, Through The Nga The National Expenditure Program (nep) Intends To Apply The Sum Of ₱ 54,474,250.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25kk0005 – Road Widening - Primary Roads - Butuan City-cagayan De Oro City-iligan City Rd - K1321 + 277.70 - K1321 + 883, K1322 + 069 - K1322 + 334. 2. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Road Widening - Primary Roads - Butuan City-cagayan De Oro City-iligan City Rd - K1321 + 277.70 - K1321 + 883, K1322 + 069 - K1322 + 334 Contract Id No. : 25kk0005 Locations : Gingoog City, Misamis Oriental Scope Of Works : Widening Of Road With A Width Of 3.35m On Both Sides With Thickness Of 0.30m (pccp) And Concreting Shoulder Width Of 2.00m With Thickness Of 0.25m (pccp); Construction Of Junction Road With 5m Width With 0.25m Thickness; Removal Of Trees, Removcal Of Existing Structures And Obstructions, Removal Of Existing Pavement And Slope Protection; Construction Of Lined Canal, Retaining Wall With Wheel Guard With Reflectorized Paint, Installation Of Rcpc And Rcbc; And White Reflectorized Thermoplastic Pavement Markings. Approved Budget For The Contract : ₱ 54,474,250.00 Contract Duration : 225 Calendar Days Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Size Range Medium A, Pcab License Category Of (b) For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. The Contractor Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During The Post-qualification. 4. Interested Bidders May Obtain Further Information From Department Of Public Works And Highways – Misamis Oriental First District Engineering Office And Inspect The Bidding Documents At Dpwh - Misamis Oriental First District Engineering Office, Gingoog City During Weekdays From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of ₱50,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Will Hold A Pre-bid Conference On November 21, 2024, 02:00 P.m. At Bac-conference Room, 3rd Floor, Dpwh-mofdeo, And/or Through Videoconferencing/webcasting Via Live Streaming: (youtube Page) Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq Which Shall Be Open To Prospective Bidders. 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. The Deadline For Issuance/ Downloading Of Bidding Documents (buying Of Bidding Documents) Will Be On December 05, 2024 Until 08:30 A.m. In Accordance With The Department's Citizen's Charter (attached As Annex "a") And Unnumbered Memorandum Dated December 27, 2001 (attached As Annex "b"), Only The Following Documents Are Required From Prospective Bidders Prior The Sale Of Bidding Documents, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary C. Letter Of Intent (for Foreign Funded Projects) Bids Must Be Duly Received By The Bac Secretariat At Bac-conference Room, 3rd Floor, Dpwh - Misamis Oriental First District Engineering Office For Manual Submission Or At Electronicbids_misamisoriental1@dpwh.gov.ph For Electronic Submission On Or Before December 05, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 05, 2024, Immediately After The Deadline For The Submission Of Bid, At Bac-conference Room, 3rd Floor, Dpwh-mofdeo And Through Live Streaming: Dpwh Misamis Oriental 1st Deo Https://www.youtube.com/channel/uc4roqj_fk-kh-pqcmg6gvkq (youtube Page) Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. In Consistent Of The Do 127 S 2018, “if At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid”. 11. The Department Of Public Works And Highways – Misamis Oriental First District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Marcelino O. Cabeguin, Jr., A.e.r. April Jane T. Pecasales Oic- Assistant District Engineer Engineer Ii Bac Chairperson Head, Bac Secretariat Dpwh-misamis Oriental 1st Deo Dpwh-misamis Oriental 1st Deo Brgy. 26, Gingoog City, Misamis Oriental Brgy. 26, Gingoog City, Misamis Oriental Tel/ No.: (088) 861-1185 Tel/ No.: (088) 861-1185 Email Address: Dpwhmofdeo@yahoo.com Email Address: Dpwhmofdeo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents : Www.philgeps.gov.ph : Www.dpwh.gov.ph For Online Bid Submission : Electronicbids_misamisoriental1@dpwh.gov.ph November 14, 2024 Approved By: Marcelino O. Cabeguin, Jr., A.e.r. Oic- Assistant District Engineer Bac Chairperson

City Of Tayabas Tender

Philippines
Closing Soon2 Dec 2024
Tender AmountPHP 5.7 Million (USD 97.3 K)
Details: Description Republic Of The Philippines Province Of Quezon City Government Of Tayabas Request For Quotation The City Government Of Tayabas, Through Its Bids And Awards Committee (bac), Will Undertake Negotiated Procurement – Two Failed Bidding For Rfq # 24-390 – Procurement Of Two (2) Motorized Rescue Vehicle For The Preparedness In The Disaster Response And Rescue Activities And Safe Transfer Of Evacuees – Drrmo Amounting To Five Million Seven Hundred Forty Eight Thousand Three Hundred Six Pesos Only (5,748,306.00) With Sec. 53.1 Of The Implementing Rules And Regulations Of The Republic Act No. 9184. Canvass Forms Can Be Obtained From The Bac Secretariat At 2nd Flr. Bac Office New Tayabas City Hall, Brgy. Baguio, City Of Tayabas Starting November 25, 2024 From 8:30 Am To 4:00 Pm. Deadline For Submission Of Canvass Is On Or Before November 28, 2024 9:00 Am. At Bac Secretariat At 2nd Flr. Bac Office New Tayabas City Hall, Brgy. Baguio, City Of Tayabas Along With The Following Requirements For Accreditation Purposes: 1. Dti Business Name Registration Or Sec Registration Certificate; 2. Valid And Current Mayor’s Permit/municipal License; 3. Certified Copy Of Vat Registration Certificate Showing The Taxpayer Identification Number (tin); 4. Latest Tax Clearance Certificate (executive Order No. 398); 5. Philgeps Certificate Of Registration; 6. Audited Financial Statements, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Bidder’s Total And Current Assets And Liabilities. 7. Statement Of The Bidder That It Is Not “blacklisted” Or Barred From Bidding By The Government Or Any Of Its Agencies, Officers, Corporations Or Lgus, Including Non-inclusion In The Consolidated Blacklisting Report Issued By The Gppb; 8. Latest Income Tax Return With Bir Acknowledgement Receipt 9. Nfcc 10. Sketch Of The Company Location And 3r Size Photos Showing The Office/plant, Number And Street. 11. Company Profile 12. With Service Center Within 50km Radius From The Office Of Procuring Entitiy. 13. Certificate Of Accreditation From Lto As Manufacturer Of Motor Vehicles And / Or Their Components. The Contract Will Be Awarded To Qualified Bidders Whose Bid Proposal Appears To Be The Most Advantageous And Responsive To The City Government Of Tayabas, In Accordance With The Revised Irr Of Ra 9184 And The Agency’s Judgment And Discretion, But Not In No Way Bound To Accept The Lowest Bid Or Any Bid Proposal Which In Its Judgment Are, In The Ultimate Analysis, Not Advantageous To The Government. Bids Submitted After The Prescribed Deadline Shall No Longer Be Accepted. Delivery Of Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Purchase Order. Only Accredited Suppliers May Secure Official Request For Quotation Form From The Bac Secretariat. Participating Duly Licensed Suppliers/ Manufacturers/ Distributors/contractors Must Submit The Officially Prepared Request For Quotation Form With Legibly Typed /printed Price Quotations Unto The Space Provided Opposite The Item Description Of The Request For Quotation Form, Signed And Sealed Into An Envelope To The Bac Secretariat/twg, City Government Of Tayabas. The City Government Of Tayabas Reserves The Right To Accept Or Reject Any Or All Bids, To Annul The Canvassing Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Supplier Or Suppliers, Or To Award Such Bid To The Supplier Whose Bid Is Considered Most Advantageous To The Government. Jayvee Mark E. Ford Head, Bac Secretariat Item No. Item Description Qty. Unit 1 Procurement Of Two (2) Motorized Rescue Vehicle For The Preparedness In The Disaster Response And Rescue Activities And Safe Transfer Of Evacuees Engine And Transmission Specifications Engine Technology: Yd25 Ddti 2.5 Liter, Inline 4 Cylinder Type: 16 Valves Dohc, Variable Turbocharger Diesel Displacement: 2,488 Maximum Power: 129/3,200 Rpm Maximum Torque: 356/ 1,400 – 2,000 Rpm Fuel System: Common Rail Direct Injection Fuel Tank Capacity: 65 Liters Transmission Type: 5-speed Manual Dimensions And Weight Overall Length X Width X Height: 5,230 X 1,880 X 2,285 Wheelbase: 2,940 Mm Ground Clearance: 195mm Curb Weight: 2,239 Kg Payload Capacity: 1,161 Kg Chassis/ Tires And Wheels Suspension Front: Torsion Bar With Stabilizer / Rear: Rigid Axle With Leaf Spring Brakes Front: Ventilated Disc / Rear: Drum Steering Type: Rack And Pinion Power Steering Wheels And Tires: 15” Steel With Full Wheel Cover (195/70 R15c) Exterior Headlamps: Multi-reflector With Halogen Bulbs And Integratedturn Signal Lights Front Foglamps: With Led Front Grille: Chrome Bumper: Body Color Door Mirrors: Black Door Handles: Body Color Wipers Front And Rear: Intermittent Rear Window Defroster With Timer: With Tailgate Closure Assist: With Function Power Windows: With One-touch Auto Up/down (driver Side) Door Locks: Power Audio: 2-din Single In-dash Cd/am/fm/aux Speakers: 4-speakers Air-conditioning System: Manual (dial Type)with Heater Rear Air-conditioning With Independent Control: 14 Vents High Beam Assist: With Automatic Headlamps(on/off): With Safety And Security Srs Airbags: Driver, Front Passenger, Front Side And Front Side Curtain (x6) Anti-lock Braking System(abs): With Electronic Brake-force Distribution(ebd)and Brake Assist(ba) Vehicle Dynamic Control: With High Mount Stop Lamp: With (led) Keyless Entry System: With (remote Key) Interior Auto Dimming Rear View Mirror: With Seats: Front: Low Back-type(adjustable Headrest) With Manual Slide And Recline Function Front Center: With 2nd Row: Bench Type (manual Recline, Adjustable Headrest) 3rd And 4th Row: Bench Type (manual Recline, Adjustable Headrest) Single Seat (manual Recline, Adjustable Headrest) 5th Row: Bench Type (manual Recline, Adjustable Headrest And Fold-up Function) Seat Material: Premium Fabric Steering Wheel: 3-spoke Urethane/ Manual Tilt Inside Door Handle: Chrome Interior Lamps: Front: With Map Lamp Rear: Room Lamp (x2) Beverage Holder: Cup Holders(x10) Bottle Holders(x5) Grips: Front(x3) And Rear Passenger Entry (x2) 12v Accessory Socket: With A.ambulance Equipment Installed Toplight W/siren & Pa System -orange/orange (one Piece) 2 Layer Floor Mounted Cabinet Full Collapsible Stretcher W/locking Mechanism (one Piece) B.consumables Oxygen Tank With Content(20lbs),38(height) Wall Mounted Bp Apparatus First Aid Kit Oxygen Regulator Ambubag Combination (adult And Pedia) Minor Surgical Kit (16pcs) Flash Light Led Type(with 3 Pcs Battery) Stethoscope Spineboard (one Piece) C.others Dash Board Blinker Gen 3 Led (one Piece) Tailgate Blinker Gen 3 Led (one Piece) Side Blinker Gen 3 Led (two Pieces) Headlight Blinker Module W/controller (one Piece) Fire Extinguisher (5lbs), 16”” (height) Florescent Lamp (one Piece) "ambu Package I.v Holder Pnrc" Single Oxygen Tank Holder Coin Matting(vinyl) Bumper Approach Ramp Approach 2 Seater W/storage Seat Assembly W/ Backrest 3 Seaters W/ Storage Seat Assembly, W/paint Leather Upholstery, W/ Backrest, W/seat Belt, Install At Rear Right Side Of Cabin Tint(black) Acrylic Divider Load Plus (one Piece) Uv (one Piece) Portable Aed (one Piece) Digital Bp (one Piece) Oxygen Mask Adult (one Hundred Twenty Pieces) For Pedia (fifty Pieces) For Neonate (fifty Pieces) Oxygen Canula (one Hundred Pieces) Grab Rail (one Piece) Dvr Front & Rear Camera (one Piece) Window Curtain Local Made, Cotton Fabric, Lh/rh Side And Rear Medical Green Color Inclusions: 1. Install Vinyl Stickers And Other Decals At All Side Of Vehicle With Included Logo As Specified By The End-user 2. Lettering Of Word (see Attached Photo) 3 Yrs. Lto Reg. 1 Year Warranty Free Insurance Return All Excess Items, Like Passenger Seats And Floor Carpet Back To Customer 2 Unit ***nothing Follows*** Wilfredo S. Tomines Bac, Chairperson

DEPARTMENT OF EDUCATION DIVISION OF BACOLOD CITY Tender

Machinery and Tools
Corrigendum : Tender Amount Updated
Philippines
Closing Soon25 Nov 2024
Tender AmountPHP 371.6 K (USD 6.2 K)
Details: Description Procurement Of Learning Tools And Equipment (lte) For Technical-vocational-livelihood (tvl) Packages For Public Senior High Schools Fy 2024 Of Deped, Division Of Bacolod City Lot 1. Hardware Tools And Equipment Fire Extinguisher, With Contents I-for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.lncludes User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality 2 Units Php 4,250.00 Allen Wrench 1. Material: Chrome Vanadium Steel, Hrc 38 To 60 2. Set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm 3. With Holder/ring To Keep The Set Intact 4. Label Of Sizes Engraved In Each Allen Wrech 5. Smooth Surfaces And No Sharp Edges 6. Plastic Pack By Set 35 Pcs Php 1,000.00 Crimping Tool (rj 45) Pass Through 1. Ratchet Crimp Tool 2. All-in-one Tool That Can Strip, Cut, And Crimp 3. Lightweight Steel Frame 4. Rj 45 Compatible 5. Position For 8p/6p/6c And 4c Connectors 6. Lightweight Compact And Durable 7. Smooth Surface And No Sharp Edges Except Cutting Edges 8. Carton Box Packaging 30 Pcs Php 1,500.00 Desoldering Pump 1. Material: Plastic Or Aluminum Housing 2. Replaceable Het-resistant Plastic Tip 3. Length: Minimum Of 6 Inches 4. Effective In Removing Solder 5. Smooth Surface And No Sharp Edges 6. Carton Or Plastic Packaging 30 Pcs Php 650.00 Electric Drill, Portable Material: Hard Plastic Related Voltage: 220/240volts, Ac 60 Hz Power In Watts: 550 To 650 Watts Speed: Variable Speed Chuck Capacity: 2 To 13 Mm Power Cord Must Have Flt Blade Attachment Plug (type A Plug) Comes With Hss Drill Bits: 2 Mm 4 Pcs, 4 Mm 4pcs, 6 Mm 4 Ppcs, 8 Mm 4pcs, 10 Mm 4 Pcs, 12 Mm 4pcs, 12.5 Mm 4 Pcs Total- (28 Pcs) Masonry Drill Bits: 4 Mm 2 Pcs, 6 Mm 2 Pcs, 8 Mm 2 Pcs, 10 Mm 2pcs, 12 Mm 2 Pcs Total - ( 10 Pcs) With Hammer Function For Concrete Drilling Comes With English User’s Manual Includes Of The Following A. A Diagram Of The Parts With Label; B. Assembly Instructions; C. Operating Procedures; D. Safety Precautions When Using The Equipment; E. Basic Troubleshooting And Maintenance Procedures. Warranty Period Of Parts And Services: 1 Year 3 Units Php 7,500.00 Long Nose Pliers, 8 1. Material: Chrome Vanadium Steel, Hrc 38 To 60 2. Length: 7 Inches (minimum) 3. Handle Type: Curved Handle With Rubber Cushion For Easy Grip 4. Jaws Type: Knurled And Long Tempered 5. Comes With Hardened Cutting Edges And Chrome-nickel Finish 6. Smooth Surface And No Sharp Edges 7. Carton Or Plastic Packaging 30 Pcs Php 523.00 Phillip's Screw Driver ,8" Insulated Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; Handle Material: Molded Plastic Overall Length: 8 Inches (minimum) Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) Non Slip Handle Design Carton Or Plastic Packaging 20 Pcs Php 350.65 Precision Screw Driver Set Material: Hardened And Tempered Steel; 1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1 6 X Standard Tip No. 1,1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet ; Plastic Storage Case; 15 Pcs Php 1,000.00 Soldering Iron, 60w Type: Iron Rod Voltage: 220/240vac, 60hz, Single Phase; Power 60w (minimum); Body Length: 8.3 Inches (21 Cm) Approximate Cord Length: 1.5 Meters (minimum) Handle : Plastic; (non-slip Handle) With User's Manual In English That Contains User's Guide, Operating Procedure And Maintenance. Interchangeable Copper Tip; Should Have Available Spare Parts Nationwide For A Minimum Period Of 5 Years; Carton Or Plastic Packaging 30 Units Php 1,500.00 Standard Screwdriver (flat), 8" Insulated Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; Handle Material: Molded Plastic Overall Length: 8 Inches (minimum) Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) Non Slip Handle Design Carton Or Plastic Packaging 30 Pcs Php 533.00 Wire Stripper Type: Spring-loaded Self-opening; Body Shape: Long Jaw With Slot Blade Material: Hardened Alloy Steel (sharp Edges To Strip And Cut The Wires) Wires To Striped: 10 Awg To 24 Awg Length: 7 Inches (minimum) Comes With Automatic Self-adjusting Spring, Crimping Slot, And Hard 15 Pcs Php 600.00 Combination Pliers, 8" Type: Combination Pliers Body Shape: Square Nose Material: Chrome Vanadium/forged Steel Length: 9 Inches (minimum) Insulation Range: 1000 Volts (etched On The Handle) Design: Square Nose With Serrated Jaw Comes With Nickel Plated Finish, Side Cutter And Insulated Handle Must Be Branded (brand Must Be Etched Either In The Head Or On The Handle) 20 Pcs Php 380.00 Sub-total Php 245,793.00 Lot 2. Appliances Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service 2 Units Php 3,900.00 Clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing Ioa Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 1 Unit Php 3,101.00 Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 2 Units Php 1,800.00 Vacuum Cleaner, Dry & Wet Electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing Ioa Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Userts Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, 1 Unit Php 10,002.00 Laundry, Washer 1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Plz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.1nciudes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 1 Unit Php 49,999.00 Sub-total Php 74,502.00 Lot 3. Cleaning Tools And Equipment Boots, Safety, Plastic Upper Material: Elastic Pvc Sizes: Size 7 - 1 Pair Size 8 - 1 Pair Size 9 - 1 Pair Size 10 -1 Pair Size 11 - 1 Pair Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size 5 Pairs Php 1,250.00 Brushes, For Housekeeping Brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- Lcm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges 5 Pcs Php 500.00 Buckets, Water Water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges 5 Pcs Php 350.00 Caddy, Toilet Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :piastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges 2 Pcs Php 600.00 Carpet, Sweeper Carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 1 Pc Php 5,000.00 Lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch 20 Pcs Php 80.00 Dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges 10 Pcs Php 275.00 Anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges 10 Pcs Php 250.00 Foam, Scrubbing 1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality 30 Pcs Php 50.00 Garbage Receptacles 1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality 2 Pcs Php 1,000.00 Gloves, Rubber 1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.coior : Any Color 4.size : Medium 5.0ther Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality 18 Pcs Php 263.80 Mop Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 3 Pcs Php 1,000.00 Caution Sign A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100-120 Mm X 50-70 Mm, Arial Smooth Surface, No Sharp Edges 5 Pcs Php 650.00 Dish Sponge Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded 5 Pcs Php 200.00 Spray Gun, Water Barber/saion Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded 5 Pcs Php 150.00 Squeegee Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges 2 Pcs Php 800.00 Mop Squeezer Mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges 2 Pcs Php 5,000.00 Sub-total Php 51,398.40 Grand Total Php 371,693.40 Instruction: Indicate “comply” Or “not Comply” In The Space Provided Below. Items Description Statement Of Compliance (state “comply” Or “not Comply”) Other Requirements: • Branded, Brand New/ New Stocks • Sealed With Label • With Appropriate Packaging • With User Manual (for Equipment) • With Necessary Accessories (power Cord / Adapter / Charger / Etc) • With Warranty, Replacement Of Damage Equipment Within 1month Warranty Period • Available Service Center Within Bacolod City (equipment, Appliance, Etc) To Be Delivered At: Deped Division Of Bacolod City (supply And Property Office)

Department Of Public Works And Highways Tender

Civil And Construction...+1Road Construction
Philippines
Closing Date9 Dec 2024
Tender AmountPHP 44.6 Million (USD 756.4 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 25b00044 : Oo1: Ensure Safe And Reliable National Road System: Network Development Program - Road Widening - Primary Roads Along Manila North Rd K0634 + 535 - K0636 + 699 1. The Dpwh Regional Office Ii, Through The Dpwh Fy 2025 Nep (epa - Early Procurement Activity) Intends To Apply The Sum Of ₱44,681,064.28 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 25b00044: Oo1: Ensure Safe And Reliable National Road System: Network Development Program - Road Widening - Primary Roads Along Manila North Rd K0634 + 535 - K0636 + 699. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Oo1: Ensure Safe And Reliable National Road System: Network Development Program - Road Widening - Primary Roads Along Manila North Rd K0634 + 535 - K0636 + 699 Contract Id No. : 25b00044 Location : Sanchez Mira, Cagayan Brief Project Description : Construction Of Pccp Road, Length = 2.164 Km, (as Per Survey), With Drainage And Slope Protection Works And Road Safety Facilities Scope Of Works : Other General Requirements • Project Billboard/ Signboard • Occupational Safety And Health Program • Traffic Management • Mobilization/ Demobilization • Removal And Relocation Of Utilities • Environmental Management And Monitoring Earthworks • Individual Removal Of Trees – Small • Removal Of Actual Structures/obstruction (concrete) • Removal Of Existing Road Signs • Excavation (surplus Common, Structure, Pipe Culverts And Drain Excavation) • Foundation Fill • Embankment From Roadway/structure Excavation • Subgrade Preparation Subbase And Base Course • Polymer Stabilized Subbase/base/surface Course Surface Courses • Pccp, (0.28, 0.30) M Thick, 14-day Concrete • Pccp, 0.30 M Thick, 7-day Concrete Road/bridge Construction • Reinforcing Steel Grade (40 & 60) • Structural Concrete 20.68 Mpa Class A 14 Days • Structural Concrete 27.58 Mpa Class A 28 Days (retaining Wall) • Paint Drainage And Slope Protection Structures • Pipe Culverts 910 Mm Dia. Class Iv Rcpc • Catch Basins 610 Mm Dia. • Grouted Riprap A (apron) Miscellaneous Structures • Metal Guardrail (metal Beam) Including Post Single W-beam • Metal Beam End Piece Bull Nose • Trees (furnishing And Transplanting) • Reflectorized Thermoplastic Pavement Markings (white) • Removal Of Existing Reflectorized Thermoplastic Pavement Markings Approved Budget For The Contract (abc) : ₱44,681,064.28 Contract Duration : 107 Calendar Days Inclusive Of 7 Unworkable/rainy Days, 23 Sundays And Holidays 2. The Major Category Of Work For The Project Is Rcp - Roads: Construction – Pccp. 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20 - December 09, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos Only (₱25,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 27, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before December 09, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On December 09, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 20-26, 2024 Conspicuous Place (procurement Bulletin Board): November 20-26, 2024

Department Of Public Works And Highways Tender

Civil And Construction...+1Road Construction
Philippines
Closing Date4 Dec 2024
Tender AmountPHP 965 K (USD 16.3 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 25b00034 : Oo1: Ensure Safe And Reliable National Road System: Network Development Program - Road Widening- Primary Roads - Manila North Rd , K0668+994.20-k0668+1017.20 1. The Dpwh Regional Office Ii, Through The Dpwh Fy 2025 Nep (epa - Early Procurement Activity) Intends To Apply The Sum Of ₱965,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 25b00034: Oo1: Ensure Safe And Reliable National Road System: Network Development Program - Road Widening- Primary Roads - Manila North Rd , K0668+994.20-k0668+1017.20. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Oo1: Ensure Safe And Reliable National Road System: Network Development Program - Road Widening- Primary Roads - Manila North Rd , K0668+994.20-k0668+1017.20 Contract Id No. : 25b00034 Location : Abulug, Cagayan Brief Project Description : Construction Of Pccp Road, Length = 0.0230 Lane-km., With Road Safety Facilities Scope Of Works : Other General Requirements • Project Billboard/ Signboard • Occupational Safety And Health Program • Traffic Management • Mobilization/ Demobilization Earthworks • Excavation (structure) • Foundation Fill • Embankment (from Roadway/ Structure Excavation, Borrow) • Subgrade Preparation Subbase And Base Course • Polymer Stabilized Subbase/base/surface Course Surface Courses • Pccp, 0.30m Thick, 14-day Concrete • Pccp, 0.30m Thick, 7-day Concrete (widening) Road/bridge Construction • Reinforcing Steel Grade (40 & 60) • Structural Concrete 27.58 Mpa Class A 28 Days • Paint Miscellaneous Structures • Metal Guardrail (metal Beam) Including Post Single W-beam • Metal Beam End Piece Bull Nose • Reflectorized Thermoplastic Pavement Markings (white) • Removal Of Existing Reflectorized Thermoplastic Pavement Markings Approved Budget For The Contract (abc) : ₱965,000.00 Contract Duration : 48 Calendar Days Inclusive Of 4 Unworkable/rainy Days, 9 Sundays And Holidays 2. The Major Category Of Work For The Project Is Rcp - Roads: Construction – Pccp. 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15 - December 04, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (₱1,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 22, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before December 04, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On December 04, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 15-21, 2024 Conspicuous Place (procurement Bulletin Board): November 15-21, 2024
4641-4650 of 4709 active Tenders